08/08/2026 12:09:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1624840 ~ 6.07 samples/sec, 81 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:10:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0036138 ~ 6.07 samples/sec, 81 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:11:24 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:11:24 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:11:42 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:11:42 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:12:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0040379 ~ 6.07 samples/sec, 83 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:13:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1401252 ~ 6.07 samples/sec, 83 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:14:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0127047 ~ 6.07 samples/sec, 83 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:15:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1469583 ~ 6.07 samples/sec, 83 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:16:30 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:16:30 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:17:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0028358 ~ 6.07 samples/sec, 84 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:18:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1606343 ~ 6.07 samples/sec, 84 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:18:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:18:38 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:19:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1580466 ~ 6.02 samples/sec, 85 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:20:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0022626 ~ 6.07 samples/sec, 85 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:21:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1579093 ~ 6.07 samples/sec, 85 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:22:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1221390 ~ 6.07 samples/sec, 85 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:23:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0011225 ~ 6.05 samples/sec, 85 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:23:56 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:23:56 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:24:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1363633 ~ 6.07 samples/sec, 86 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:25:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0071856 ~ 6.02 samples/sec, 86 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:26:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1473391 ~ 6.07 samples/sec, 86 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:27:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1571065 ~ 6.07 samples/sec, 86 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:28:29 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:28:29 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:29:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1596163 ~ 6.07 samples/sec, 87 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:30:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0168143 ~ 6.06 samples/sec, 87 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:31:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1596618 ~ 6.07 samples/sec, 87 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:31:58 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:31:58 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:32:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0037975 ~ 6.02 samples/sec, 88 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:33:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1487109 ~ 6.07 samples/sec, 88 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:34:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1459729 ~ 6.07 samples/sec, 88 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:35:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0022207 ~ 6.07 samples/sec, 88 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -30100 [McuMovementClient.cs@545] 08/08/2026 12:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 12:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 12:36:33 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 08/08/2026 12:36:33 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 12:36:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:01.5860746. SinceCollect=09:49:08.5493287. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 83793882, XYCompressed = 6863158, LSource = 42905517, LCompressed = 1314602 } [McuMovementClient.cs@478] 08/08/2026 12:36:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=144852, gen1=20205, gen2=761, LatencyMode=Interactive, FreeMemory=6099763200, Live=317178304, HeapSizeBytes=316439808, FragmentedBytes=702184, TotalCommittedBytes=318849024, PinnedObjectsCount=1, MemoryLoadBytes=2450675466, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 12:36:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 3057054821279 (3057054821279 @ 0) for mcu = 25461.320204 [07/08/2026 19:00:33] (25475.456843991666 sec) to 7296087132104 (from now=7295967132104, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 12:36:36 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:36:36 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:37:17 WARN [SLS4All.Compact.ComponentModel.PrinterLifetime] [0] Performing ShutdownSystem as requested! [PrinterLifetime.cs@106] 08/08/2026 12:37:17 INFO [Microsoft.Hosting.Lifetime] [0] Application is shutting down... 08/08/2026 12:37:17 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Exiting, trying to disable WatchDog [PrinterWatchDogMonitor.cs@165] 08/08/2026 12:37:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1394054 ~ 6.07 samples/sec, 89 resets, 101 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 12:37:47 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin stopped 08/08/2026 12:37:47 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Saving movement state [MovementClientBase.cs@207] 08/08/2026 12:37:47 DBUG [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 12:37:47 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 12:37:47 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Cancelled read loop [Mlx90640Camera.cs@326] 08/08/2026 12:37:47 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 12:37:47 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 12:37:47 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 has ended Run() [McuManager.cs@331] 08/08/2026 12:37:47 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu has ended Run() [McuManager.cs@331] 08/08/2026 12:37:47 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host has ended Run() [McuManager.cs@331] 08/08/2026 12:37:47 INFO [SLS4All.Compact.McuClient.McuManager] [0] All MCUs finished running 08/08/2026 12:37:47 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager finished running [McuPrinterClient.cs@231] 08/08/2026 12:37:48 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.PipedMcuProxyRunner[1] has been cancelled [McuPrinterClient.cs@170] 08/08/2026 12:37:48 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager reset [McuPrinterClient.cs@242] 08/08/2026 12:37:48 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.McuHostRunner[0] has been cancelled [McuPrinterClient.cs@170] 08/08/2026 12:37:54 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 08/08/2026 12:37:54 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 08/08/2026 12:37:54 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 08/08/2026 12:37:54 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 08/08/2026 11:37:54 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 08/08/2026 12:37:55 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 08/08/2026 12:37:55 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 08/08/2026 12:37:55 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 08/08/2026 12:37:55 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 08/08/2026 12:37:55 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=e8ebeef1-5730-4812-bfac-a7e17455af2e) 08/08/2026 12:37:55 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 08/08/2026 12:37:55 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 08/08/2026 12:37:55 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 08/08/2026 12:37:55 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 08/08/2026 12:37:55 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:37:55 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 08/08/2026 12:37:56 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 08/08/2026 12:37:56 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 08/08/2026 12:37:56 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 08/08/2026 12:37:56 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 08/08/2026 12:37:57 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 08/08/2026 12:37:59 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 08/08/2026 12:37:59 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 08/08/2026 12:37:59 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 08/08/2026 12:37:59 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 08/08/2026 12:37:59 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 08/08/2026 12:37:59 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 08/08/2026 12:38:02 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 12:38:02 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 12:38:02 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 08/08/2026 12:38:02 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 08/08/2026 12:38:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 08/08/2026 12:38:03 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/38f15d6a-3627-4b19-a8aa-6a6319e9aa3c.sh [SystemPrinterHostname.cs@140] 08/08/2026 12:38:03 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 08/08/2026 12:38:04 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 08/08/2026 12:38:04 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4360460. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=250, gen1=66, gen2=10, LatencyMode=Interactive, FreeMemory=6778519552, Live=281160048, HeapSizeBytes=289822680, FragmentedBytes=9146992, TotalCommittedBytes=326877184, PinnedObjectsCount=24, MemoryLoadBytes=1774627061, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 12:38:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 12:38:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0595483. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0906888. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 12:38:05 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 08/08/2026 12:38:05 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 08/08/2026 12:38:05 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 08/08/2026 12:38:05 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNNL85VO7H5F, RemoteIpAddress = 127.0.0.1, RemotePort = 33356, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1AOhsN8zBHalrR-7rSGfwRCCHbqGcZN6tBkMWkB37wtF5nI6FOA08In-2D7erRsSvdRRNRsoiCEvBgad_cl8AFcciR9_a4vafMZwY71eH7_PCNlWFfCgj-6x3_Thr4OwfRSKDJk-eMt9e89iWfMMzmio_FkHYQWXo5fI9tz7zK6-efW0KxU7UYxAwW5jZcMwhmsUI5v1fdkTDMGqdOWMSHss-Oa1sgdVB34-4BTdqJoci31UwgVjWpj4_PFcgPrXwm5mL_6S0QUW_R5tszZPlpEfBeN6cGh44Rr_2wDgtu0451QxompliRmCgeTeENU34i8tGTrmiim8iqamzYJzt9utwriFeBEccJ0bh-GmIRfqRuz7ANy3YTtF9ngaRCT3nWOSLq20f8_ZAiFnyzQRrrSHTxerIZ8e_TFu_UxYl9aptmfdUmjt9vW50ZgGngKmO15Q5DDyHZ6r12m_tsOvagTuy5BvTLeZk688BDSS_wMJ7CGQ2VlSQ97lIjpOYRt6o]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1AOhsN8zBHalrR-7rSGfwRCCHbqGcZN6tBkMWkB37wtF5nI6FOA08In-2D7erRsSvdRRNRsoiCEvBgad_cl8AFcciR9_a4vafMZwY71eH7_PCNlWFfCgj-6x3_Thr4OwfRSKDJk-eMt9e89iWfMMzmio_FkHYQWXo5fI9tz7zK6-efW0KxU7UYxAwW5jZcMwhmsUI5v1fdkTDMGqdOWMSHss-Oa1sgdVB34-4BTdqJoci31UwgVjWpj4_PFcgPrXwm5mL_6S0QUW_R5tszZPlpEfBeN6cGh44Rr_2wDgtu0451QxompliRmCgeTeENU34i8tGTrmiim8iqamzYJzt9utwriFeBEccJ0bh-GmIRfqRuz7ANy3YTtF9ngaRCT3nWOSLq20f8_ZAiFnyzQRrrSHTxerIZ8e_TFu_UxYl9aptmfdUmjt9vW50ZgGngKmO15Q5DDyHZ6r12m_tsOvagTuy5BvTLeZk688BDSS_wMJ7CGQ2VlSQ97lIjpOYRt6o]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 08/08/2026 12:38:05 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNNL85VO7H5F, RemoteIpAddress = 127.0.0.1, RemotePort = 33356, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1AOhsN8zBHalrR-7rSGfwRCCHbqGcZN6tBkMWkB37wtF5nI6FOA08In-2D7erRsSvdRRNRsoiCEvBgad_cl8AFcciR9_a4vafMZwY71eH7_PCNlWFfCgj-6x3_Thr4OwfRSKDJk-eMt9e89iWfMMzmio_FkHYQWXo5fI9tz7zK6-efW0KxU7UYxAwW5jZcMwhmsUI5v1fdkTDMGqdOWMSHss-Oa1sgdVB34-4BTdqJoci31UwgVjWpj4_PFcgPrXwm5mL_6S0QUW_R5tszZPlpEfBeN6cGh44Rr_2wDgtu0451QxompliRmCgeTeENU34i8tGTrmiim8iqamzYJzt9utwriFeBEccJ0bh-GmIRfqRuz7ANy3YTtF9ngaRCT3nWOSLq20f8_ZAiFnyzQRrrSHTxerIZ8e_TFu_UxYl9aptmfdUmjt9vW50ZgGngKmO15Q5DDyHZ6r12m_tsOvagTuy5BvTLeZk688BDSS_wMJ7CGQ2VlSQ97lIjpOYRt6o]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1AOhsN8zBHalrR-7rSGfwRCCHbqGcZN6tBkMWkB37wtF5nI6FOA08In-2D7erRsSvdRRNRsoiCEvBgad_cl8AFcciR9_a4vafMZwY71eH7_PCNlWFfCgj-6x3_Thr4OwfRSKDJk-eMt9e89iWfMMzmio_FkHYQWXo5fI9tz7zK6-efW0KxU7UYxAwW5jZcMwhmsUI5v1fdkTDMGqdOWMSHss-Oa1sgdVB34-4BTdqJoci31UwgVjWpj4_PFcgPrXwm5mL_6S0QUW_R5tszZPlpEfBeN6cGh44Rr_2wDgtu0451QxompliRmCgeTeENU34i8tGTrmiim8iqamzYJzt9utwriFeBEccJ0bh-GmIRfqRuz7ANy3YTtF9ngaRCT3nWOSLq20f8_ZAiFnyzQRrrSHTxerIZ8e_TFu_UxYl9aptmfdUmjt9vW50ZgGngKmO15Q5DDyHZ6r12m_tsOvagTuy5BvTLeZk688BDSS_wMJ7CGQ2VlSQ97lIjpOYRt6o]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 08/08/2026 12:38:05 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNNL85VO7H5F, RemoteIpAddress = 127.0.0.1, RemotePort = 33356, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1AOhsN8zBHalrR-7rSGfwRCCHbqGcZN6tBkMWkB37wtF5nI6FOA08In-2D7erRsSvdRRNRsoiCEvBgad_cl8AFcciR9_a4vafMZwY71eH7_PCNlWFfCgj-6x3_Thr4OwfRSKDJk-eMt9e89iWfMMzmio_FkHYQWXo5fI9tz7zK6-efW0KxU7UYxAwW5jZcMwhmsUI5v1fdkTDMGqdOWMSHss-Oa1sgdVB34-4BTdqJoci31UwgVjWpj4_PFcgPrXwm5mL_6S0QUW_R5tszZPlpEfBeN6cGh44Rr_2wDgtu0451QxompliRmCgeTeENU34i8tGTrmiim8iqamzYJzt9utwriFeBEccJ0bh-GmIRfqRuz7ANy3YTtF9ngaRCT3nWOSLq20f8_ZAiFnyzQRrrSHTxerIZ8e_TFu_UxYl9aptmfdUmjt9vW50ZgGngKmO15Q5DDyHZ6r12m_tsOvagTuy5BvTLeZk688BDSS_wMJ7CGQ2VlSQ97lIjpOYRt6o]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1AOhsN8zBHalrR-7rSGfwRCCHbqGcZN6tBkMWkB37wtF5nI6FOA08In-2D7erRsSvdRRNRsoiCEvBgad_cl8AFcciR9_a4vafMZwY71eH7_PCNlWFfCgj-6x3_Thr4OwfRSKDJk-eMt9e89iWfMMzmio_FkHYQWXo5fI9tz7zK6-efW0KxU7UYxAwW5jZcMwhmsUI5v1fdkTDMGqdOWMSHss-Oa1sgdVB34-4BTdqJoci31UwgVjWpj4_PFcgPrXwm5mL_6S0QUW_R5tszZPlpEfBeN6cGh44Rr_2wDgtu0451QxompliRmCgeTeENU34i8tGTrmiim8iqamzYJzt9utwriFeBEccJ0bh-GmIRfqRuz7ANy3YTtF9ngaRCT3nWOSLq20f8_ZAiFnyzQRrrSHTxerIZ8e_TFu_UxYl9aptmfdUmjt9vW50ZgGngKmO15Q5DDyHZ6r12m_tsOvagTuy5BvTLeZk688BDSS_wMJ7CGQ2VlSQ97lIjpOYRt6o]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 08/08/2026 12:38:05 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 08/08/2026 12:38:05 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 08/08/2026 12:38:07 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 08/08/2026 12:38:08 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 12:38:14 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 12:38:14 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 12:38:14 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 12:38:14 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 08/08/2026 13:35:14 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 08/08/2026 13:35:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1053730 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:36:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0946024 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:37:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0954090 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:38:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0663584 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:39:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0695954 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:40:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0780694 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:41:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0742365 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:42:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0789637 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:43:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0869268 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:44:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0886441 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:45:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 13:45:03 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 13:46:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0926311 ~ 6.02 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:47:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0638088 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:48:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0709584 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:49:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0845103 ~ 6.07 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:50:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0744005 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:50:29 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 13:50:30 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 13:50:43 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 13:50:43 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 13:51:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0704199 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:52:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0769493 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:53:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0616789 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:54:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 13:54:38 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 13:55:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0781327 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:56:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0762648 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:57:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0874401 ~ 6.02 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:58:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0934428 ~ 6.07 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 13:59:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0704727 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:00:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0802598 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:01:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0708554 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:01:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:01:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:02:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0853593 ~ 6.07 samples/sec, 7 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:03:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0790204 ~ 6.01 samples/sec, 7 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:04:34 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:04:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:05:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0883815 ~ 6.06 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:06:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0767183 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:07:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0683658 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:08:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0797572 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:09:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0810019 ~ 6.03 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:10:07 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:10:07 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:11:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0711667 ~ 6.08 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:12:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0722972 ~ 6.03 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:13:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0968489 ~ 6.07 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:13:52 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:13:52 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:14:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0590367 ~ 6.06 samples/sec, 10 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:15:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0821372 ~ 6.08 samples/sec, 10 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:16:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0920216 ~ 6.07 samples/sec, 10 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:17:52 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:17:52 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:18:42 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:18:42 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:19:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0741019 ~ 6.08 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:20:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0788606 ~ 6.08 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:21:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0812892 ~ 6.08 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:22:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0773806 ~ 6.08 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:22:46 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:22:46 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:23:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0704425 ~ 6.08 samples/sec, 13 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:24:26 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:24:26 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:25:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0735573 ~ 6.01 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:26:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0710534 ~ 6.08 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:27:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0769920 ~ 6.08 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:28:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0894542 ~ 6.07 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:28:45 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:28:45 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:29:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0643642 ~ 6.08 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:30:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0800681 ~ 6.03 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:31:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0652528 ~ 6.08 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:32:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0787463 ~ 6.08 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:33:14 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:33:15 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:34:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0709352 ~ 6.08 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:34:25 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] 08/08/2026 14:34:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:34:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:35:13 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 08/08/2026 14:35:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0868532 ~ 6.07 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:36:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0764845 ~ 6.08 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:37:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878623 ~ 6.07 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:38:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0858916 ~ 6.07 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:39:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0656468 ~ 6.08 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:40:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0841769 ~ 6.02 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:41:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:41:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:41:35 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:41:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:42:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0623291 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:43:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0887515 ~ 6.07 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:43:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:43:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:44:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0664075 ~ 6.08 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:45:27 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:45:28 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:46:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0699655 ~ 6.08 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:47:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0952922 ~ 6.07 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:48:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0648558 ~ 6.08 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:49:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0742030 ~ 6.08 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:49:53 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:49:53 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 14:50:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0820720 ~ 6.08 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:51:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0787019 ~ 6.08 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:52:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0788120 ~ 6.08 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:53:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0671983 ~ 6.08 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:54:14 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 08/08/2026 14:54:14 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 14:54:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0743116 ~ 6.03 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:54:54 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"00000000-0000-0000-0000-000000000000","IsEmpty":true},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:54:54 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"00000000-0000-0000-0000-000000000000","IsEmpty":true},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:54:59 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"00000000-0000-0000-0000-000000000000","IsEmpty":true},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:55:31 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:55:36 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:55:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1172776 ~ 6.02 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:55:54 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:55:54 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:55:59 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:56:20 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:56:23 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:56:24 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:56:29 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:56:43 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.8445725 (0.8445725). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 148531.21875, Density = 0.16376319141554066 } [ExhaustiveNester.cs@1820] 08/08/2026 14:56:43 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:19.3414063 [CurrentJobAutomatic.razor.cs@103] 08/08/2026 14:56:44 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:56:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0340821 ~ 5.96 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:57:09 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:57:12 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:57:15 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:57:15 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:57:16 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:57:18 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:01.6691105 (1.6691105). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 173489.34375, Density = 0.19128078829614925 } [ExhaustiveNester.cs@1820] 08/08/2026 14:57:18 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:02.2081158 [CurrentJobAutomatic.razor.cs@103] 08/08/2026 14:57:19 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":148531.219,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:57:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.1308710 ~ 5.94 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:58:26 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:58:30 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:58:32 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:01.1666151 (1.1666151). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 173489.34375, Density = 0.19128078829614925 } [ExhaustiveNester.cs@1820] 08/08/2026 14:58:32 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:01.9633735 [CurrentJobAutomatic.razor.cs@103] 08/08/2026 14:58:33 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:58:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1469694 ~ 6.04 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 14:59:03 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:59:04 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:59:05 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:01.0917818 (1.0917818). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 167249.8125, Density = 0.1844013890759971 } [ExhaustiveNester.cs@1820] 08/08/2026 14:59:05 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:01.4404066 [CurrentJobAutomatic.razor.cs@103] 08/08/2026 14:59:06 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":167249.812,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"}. Original={"Name":"Peter\u0027s Trophy Parts and other Stuff","CreatedAt":"2026-08-08T13:54:29.3156322+00:00","ObjectFiles":[{"Id":"8ddbd04f-1f27-42fa-9475-af312e052479","Name":"RocketBody.STL","Hash":"C839D2856C378A076C1D324C8FFF0023B3BE85A5"},{"Id":"523ced56-8ef2-41e2-9801-183bb14bfed2","Name":"RocketNoseCone.STL","Hash":"1C67D9F78C55199BE4E0067DAF900774C3290338"},{"Id":"bc72cbd8-87b3-4c02-bebe-c4beb7d95d96","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"09f6fffa-c997-497f-9b11-0ba10cd3ee1a","Name":"playing-card.stl","Hash":"4D7046903D370715E909DF66005F386548F0169E"}],"PrintProfile":{"Id":"fef53185-9ab9-417a-a384-45287f873d9e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":173489.344,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"0d426de3-1a64-4ab8-8281-1879f494d480"} 08/08/2026 14:59:30 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 14:59:30 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 15:00:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0453618 ~ 6 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:01:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0749767 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:02:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0635652 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:03:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0752960 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:04:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0774485 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:05:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0719913 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:06:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 15:06:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.8326985. SinceCollect=01:31:56.0848038. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 15:06:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=9867, gen1=769, gen2=87, LatencyMode=Interactive, FreeMemory=6433374208, Live=334701448, HeapSizeBytes=334920872, FragmentedBytes=1184624, TotalCommittedBytes=335331328, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 15:06:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] 08/08/2026 15:06:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0153361. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 666719847705 (from now=666599847705, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 666849234494 (from now=666729234494, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 666849234494 (from now=666729234494, flags=None, requested=666849234494 (666849234494 @ 0) for mcu = 5542.510213 [08/08/2026 13:10:03] (5557.0769541166665 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 666849234494 (from now=666729234494, flags=None, requested=666849234494 (666849234494 @ 0) for mcu = 5542.510213 [08/08/2026 13:10:03] (5557.0769541166665 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1933167. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:02.3232701. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 666873234494 (666873234494 @ 0) for mcu = 5542.710193 [08/08/2026 13:10:03] (5557.276954116666 sec) to 666996483684 (from now=666876483684, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5875852. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.6028895. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.6145270. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 666873234494 (666873234494 @ 0) for mcu = 5542.710185 [08/08/2026 13:10:03] (5557.276954116666 sec) to 667151244953 (from now=667031244953, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 667274531751 (from now=667154531751, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 666873234494 (666873234494 @ 0) for mcu = 5542.710203 [08/08/2026 13:10:03] (5557.276954116666 sec) to 667274531751 (from external timestamp, flags=None, requested=667274531751 (667274531751 @ 0) for mcu = 5546.054382 [08/08/2026 13:10:07] (5560.621097925 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 667274531751 (from now=667154531751, flags=None, requested=667274531751 (667274531751 @ 0) for mcu = 5546.054382 [08/08/2026 13:10:07] (5560.621097925 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6662918. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.3343209. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 667354531751 (667354531751 @ 0) for mcu = 5546.721072 [08/08/2026 13:10:07] (5561.287764591667 sec) to 667477646257 (from now=667357646257, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.1555541. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.1707450. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.1818598. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 667354531751 (667354531751 @ 0) for mcu = 5546.721104 [08/08/2026 13:10:07] (5561.287764591667 sec) to 667699287396 (from now=667579287396, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 667822466486 (from now=667702466486, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 667822466486 (from now=667702466486, flags=None, requested=667822466486 (667822466486 @ 0) for mcu = 5550.620587 [08/08/2026 13:10:11] (5565.187220716667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 667354531751 (667354531751 @ 0) for mcu = 5546.721088 [08/08/2026 13:10:07] (5561.287764591667 sec) to 667822466486 (from external timestamp, flags=None, requested=667822466486 (667822466486 @ 0) for mcu = 5550.620587 [08/08/2026 13:10:11] (5565.187220716667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6632109. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.9020313. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 667902466486 (667902466486 @ 0) for mcu = 5551.287274 [08/08/2026 13:10:12] (5565.853887383333 sec) to 668025925147 (from now=667905925147, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 350 samples in 00:01:00.1215939 ~ 5.82 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:06:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.6099269. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 667902466486 (667902466486 @ 0) for mcu = 5551.287244 [08/08/2026 13:10:12] (5565.853887383333 sec) to 668573766637 (from now=668453766637, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 668573766637 (from now=668453766637, flags=None, requested=668573766637 (668573766637 @ 0) for mcu = 5556.881471 [08/08/2026 13:10:17] (5571.448055308333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 667902466486 (667902466486 @ 0) for mcu = 5551.287244 [08/08/2026 13:10:12] (5565.853887383333 sec) to 668573766637 (from external timestamp, flags=None, requested=668573766637 (668573766637 @ 0) for mcu = 5556.881471 [08/08/2026 13:10:17] (5571.448055308333 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:06.3875283. Loops = 26. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.9224553. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 669225044137 (669225044137 @ 0) for mcu = 5562.308834 [08/08/2026 13:10:23] (5576.875367808333 sec) to 669346650521 (from now=669226650521, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 669225044137 (669225044137 @ 0) for mcu = 5562.308834 [08/08/2026 13:10:23] (5576.875367808333 sec) to 669346650521 (from external timestamp, flags=None, requested=669346650521 (669346650521 @ 0) for mcu = 5563.322232 [08/08/2026 13:10:24] (5577.888754341667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 669225044137 (669225044137 @ 0) for mcu = 5562.308834 [08/08/2026 13:10:23] (5576.875367808333 sec) to 669346650521 (from external timestamp, flags=None, requested=669346650521 (669346650521 @ 0) for mcu = 5563.322232 [08/08/2026 13:10:24] (5577.888754341667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1424114. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.0754857. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 669363450521 (669363450521 @ 0) for mcu = 5563.462266 [08/08/2026 13:10:24] (5578.028754341667 sec) to 669593335646 (from now=669473335646, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 669363450521 (669363450521 @ 0) for mcu = 5563.462266 [08/08/2026 13:10:24] (5578.028754341667 sec) to 669593335646 (from external timestamp, flags=None, requested=669593335646 (669593335646 @ 0) for mcu = 5565.377997 [08/08/2026 13:10:26] (5579.944463716667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 669363450521 (669363450521 @ 0) for mcu = 5563.462266 [08/08/2026 13:10:24] (5578.028754341667 sec) to 669593335646 (from external timestamp, flags=None, requested=669593335646 (669593335646 @ 0) for mcu = 5565.377997 [08/08/2026 13:10:26] (5579.944463716667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:06.3877231. Loops = 26. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.4187213. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 670244613146 (670244613146 @ 0) for mcu = 5570.805410 [08/08/2026 13:10:31] (5585.371776216667 sec) to 670366112535 (from now=670246112535, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 670244613146 (670244613146 @ 0) for mcu = 5570.805410 [08/08/2026 13:10:31] (5585.371776216667 sec) to 670366112535 (from external timestamp, flags=None, requested=670366112535 (670366112535 @ 0) for mcu = 5571.817916 [08/08/2026 13:10:32] (5586.384271125 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 670244613146 (670244613146 @ 0) for mcu = 5570.805410 [08/08/2026 13:10:31] (5585.371776216667 sec) to 670366112535 (from external timestamp, flags=None, requested=670366112535 (670366112535 @ 0) for mcu = 5571.817916 [08/08/2026 13:10:32] (5586.384271125 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1424366. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.5714517. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Starting [LayerClient.cs@629] 08/08/2026 15:06:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:06:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:36.2634121. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:06:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 670382912535 (670382912535 @ 0) for mcu = 5571.957879 [08/08/2026 13:10:32] (5586.524271125 sec) to 671067741140 (from now=670947741140, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:06:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 670382912535 (670382912535 @ 0) for mcu = 5571.957879 [08/08/2026 13:10:32] (5586.524271125 sec) to 671067741140 (from external timestamp, flags=None, requested=671067741140 (671067741140 @ 0) for mcu = 5577.664847 [08/08/2026 13:10:38] (5592.231176166667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 670382912535 (670382912535 @ 0) for mcu = 5571.957879 [08/08/2026 13:10:32] (5586.524271125 sec) to 671067741140 (from external timestamp, flags=None, requested=671067741140 (671067741140 @ 0) for mcu = 5577.664847 [08/08/2026 13:10:38] (5592.231176166667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:06:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:07:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7399207. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.0924056. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:07:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 672125380946 (672125380946 @ 0) for mcu = 5586.478594 [08/08/2026 13:10:47] (5601.044841216667 sec) to 672246995403 (from now=672126995403, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:07:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 672125380946 (672125380946 @ 0) for mcu = 5586.478594 [08/08/2026 13:10:47] (5601.044841216667 sec) to 672246995403 (from external timestamp, flags=None, requested=672246995403 (672246995403 @ 0) for mcu = 5587.492059 [08/08/2026 13:10:48] (5602.058295025 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 672125380946 (672125380946 @ 0) for mcu = 5586.478594 [08/08/2026 13:10:47] (5601.044841216667 sec) to 672246995403 (from external timestamp, flags=None, requested=672246995403 (672246995403 @ 0) for mcu = 5587.492059 [08/08/2026 13:10:48] (5602.058295025 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:07:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7334516. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.9059960. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:07:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 673303035209 (673303035209 @ 0) for mcu = 5596.292537 [08/08/2026 13:10:57] (5610.858626741667 sec) to 673424594945 (from now=673304594945, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:07:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 673303035209 (673303035209 @ 0) for mcu = 5596.292537 [08/08/2026 13:10:57] (5610.858626741667 sec) to 673424594945 (from external timestamp, flags=None, requested=673424594945 (673424594945 @ 0) for mcu = 5597.305547 [08/08/2026 13:10:58] (5611.871624541666 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 673303035209 (673303035209 @ 0) for mcu = 5596.292537 [08/08/2026 13:10:57] (5610.858626741667 sec) to 673424594945 (from external timestamp, flags=None, requested=673424594945 (673424594945 @ 0) for mcu = 5597.305547 [08/08/2026 13:10:58] (5611.871624541666 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:09.7306152. Loops = 39. [McuMovementClient.cs@475] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:09.7306152. Loops = 39. GC duration = 00:00:00.5077099. SinceCollect=00:01:06.2276376. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=9971, gen1=776, gen2=88, LatencyMode=Interactive, FreeMemory=6442024960, Live=332869120, HeapSizeBytes=334396648, FragmentedBytes=2123608, TotalCommittedBytes=339116032, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 674480634751 (674480634751 @ 0) for mcu = 5606.105894 [08/08/2026 13:11:07] (5620.671956258333 sec) to 674663601979 (from now=674543601979, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 674480634751 (674480634751 @ 0) for mcu = 5606.105894 [08/08/2026 13:11:07] (5620.671956258333 sec) to 674663601979 (from external timestamp, flags=None, requested=674663601979 (674663601979 @ 0) for mcu = 5607.630636 [08/08/2026 13:11:08] (5622.196683158333 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 674480634751 (674480634751 @ 0) for mcu = 5606.105894 [08/08/2026 13:11:07] (5620.671956258333 sec) to 674663601979 (from external timestamp, flags=None, requested=674663601979 (674663601979 @ 0) for mcu = 5607.630636 [08/08/2026 13:11:08] (5622.196683158333 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:07:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1277567 ~ 6.02 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:07:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7271339. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:09.8160693. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:07:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 675719641785 (675719641785 @ 0) for mcu = 5616.431063 [08/08/2026 13:11:17] (5630.997014875 sec) to 675841411970 (from now=675721411970, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:07:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 675719641785 (675719641785 @ 0) for mcu = 5616.431063 [08/08/2026 13:11:17] (5630.997014875 sec) to 675841411970 (from external timestamp, flags=None, requested=675841411970 (675841411970 @ 0) for mcu = 5617.445825 [08/08/2026 13:11:18] (5632.011766416666 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 675719641785 (675719641785 @ 0) for mcu = 5616.431063 [08/08/2026 13:11:17] (5630.997014875 sec) to 675841411970 (from external timestamp, flags=None, requested=675841411970 (675841411970 @ 0) for mcu = 5617.445825 [08/08/2026 13:11:18] (5632.011766416666 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:07:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:07:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7312641. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6326795. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:07:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Completed [LayerClient.cs@681] 08/08/2026 15:08:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0883834 ~ 6.07 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:09:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:09:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:09:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:09:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:09:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:09:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:09:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0901599 ~ 6.07 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:10:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 15:10:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 15:10:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:10:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3408184. SinceCollect=00:02:46.6548720. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=10235, gen1=796, gen2=90, LatencyMode=Interactive, FreeMemory=6429933568, Live=326829512, HeapSizeBytes=334685288, FragmentedBytes=8265408, TotalCommittedBytes=342589440, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627559. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0671616. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0853747. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:10:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 119.42340175052466, Z2 = 150 } } [LayerClient.cs@969] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 676897451776 (676897451776 @ 0) for mcu = 5626.246301 [08/08/2026 13:11:27] (5640.812098133333 sec) to 694672739127 (from now=694552739127, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 676897451776 (676897451776 @ 0) for mcu = 5626.246301 [08/08/2026 13:11:27] (5640.812098133333 sec) to 694672739127 (from external timestamp, flags=None, requested=694672739127 (694672739127 @ 0) for mcu = 5774.375207 [08/08/2026 13:13:55] (5788.939492725 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 676897451776 (676897451776 @ 0) for mcu = 5626.246301 [08/08/2026 13:11:27] (5640.812098133333 sec) to 694672739127 (from external timestamp, flags=None, requested=694672739127 (694672739127 @ 0) for mcu = 5774.375207 [08/08/2026 13:13:55] (5788.939492725 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:10:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2613190. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.4266275. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:10:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] 08/08/2026 15:10:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 08/08/2026 15:10:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 15:10:51 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 15:10:56 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 15:10:56 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 15:11:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0715697 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:12:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0838584 ~ 6.07 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:13:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0908295 ~ 6.07 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:14:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:14:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:14:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:14:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:14:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:14:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:14:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0949074 ~ 6.07 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:15:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0816387 ~ 6.03 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2842235. SinceCollect=00:05:48.3669242. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=10765, gen1=836, gen2=94, LatencyMode=Interactive, FreeMemory=6450118656, Live=326407168, HeapSizeBytes=333277512, FragmentedBytes=7280864, TotalCommittedBytes=342130688, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628715. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0628929. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0761653. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:16:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 238.84680350104932, Z2 = 300 } } [LayerClient.cs@969] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 695551567993 (695551567993 @ 0) for mcu = 5781.698831 [08/08/2026 13:14:02] (5796.263066608333 sec) to 736474441292 (from now=736354441292, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 695551567993 (695551567993 @ 0) for mcu = 5781.698831 [08/08/2026 13:14:02] (5796.263066608333 sec) to 736474441292 (from external timestamp, flags=None, requested=736474441292 (736474441292 @ 0) for mcu = 6122.726486 [08/08/2026 13:19:43] (6137.287010766667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 695551567993 (695551567993 @ 0) for mcu = 5781.698831 [08/08/2026 13:14:02] (5796.263066608333 sec) to 736474441292 (from external timestamp, flags=None, requested=736474441292 (736474441292 @ 0) for mcu = 6122.726486 [08/08/2026 13:19:43] (6137.287010766667 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:16:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2658771. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.4123708. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:16:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] 08/08/2026 15:16:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 08/08/2026 15:16:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1109945 ~ 6.06 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3564598. SinceCollect=00:01:04.9003058. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=10840, gen1=849, gen2=95, LatencyMode=Interactive, FreeMemory=6415958016, Live=326325600, HeapSizeBytes=333174912, FragmentedBytes=7317296, TotalCommittedBytes=342130688, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633949. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0640976. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0752744. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:17:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 737353270158 (737353270158 @ 0) for mcu = 6130.050203 [08/08/2026 13:19:51] (6144.61058465 sec) to 744262346925 (from now=744142346925, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 737353270158 (737353270158 @ 0) for mcu = 6130.050203 [08/08/2026 13:19:51] (6144.61058465 sec) to 744262346925 (from external timestamp, flags=None, requested=744262346925 (744262346925 @ 0) for mcu = 6187.626804 [08/08/2026 13:20:48] (6202.186224375 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 737353270158 (737353270158 @ 0) for mcu = 6130.050203 [08/08/2026 13:19:51] (6144.61058465 sec) to 744262346925 (from external timestamp, flags=None, requested=744262346925 (744262346925 @ 0) for mcu = 6187.626804 [08/08/2026 13:20:48] (6202.186224375 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:17:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2659742. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.4097780. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:17:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] 08/08/2026 15:17:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 08/08/2026 15:17:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] 08/08/2026 15:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.8070578. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:17:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 745141175791 (745141175791 @ 0) for mcu = 6194.950645 [08/08/2026 13:20:55] (6209.509798258333 sec) to 745790105869 (from now=745670105869, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 08/08/2026 15:17:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 745141175791 (745141175791 @ 0) for mcu = 6194.950645 [08/08/2026 13:20:55] (6209.509798258333 sec) to 745790105869 (from external timestamp, flags=None, requested=745790105869 (745790105869 @ 0) for mcu = 6200.358499 [08/08/2026 13:21:01] (6214.917548908334 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:17:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 745141175791 (745141175791 @ 0) for mcu = 6194.950645 [08/08/2026 13:20:55] (6209.509798258333 sec) to 745790105869 (from external timestamp, flags=None, requested=745790105869 (745790105869 @ 0) for mcu = 6200.358499 [08/08/2026 13:21:01] (6214.917548908334 sec), advance=0) [McuStepper.cs@843] 08/08/2026 15:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4596017. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:14.2825517. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 08/08/2026 15:17:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] 08/08/2026 15:17:32 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Starting job: Job has been started! [UIToastProvider.cs@98] 08/08/2026 15:17:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 08/08/2026 15:17:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.6932319. SinceCollect=00:00:28.6684590. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=10871, gen1=855, gen2=99, LatencyMode=Interactive, FreeMemory=6477430784, Live=254682088, HeapSizeBytes=254383920, FragmentedBytes=1041016, TotalCommittedBytes=254656512, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Starting soft heater, with analysis filename '/surface/analysis_2025-10-21_00-57-47.s4a-sha' and HalogenMaxPercent=100 [PrintingService.cs@1732] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 0, start=0, count=408, Z=0.001 [PrintingService.cs@1518] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loading profile PrinterPath { IsSystemPath = False, PathUnsafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha, PathSafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha } [SoftAnalysisSurfaceHeater.cs@668] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 0, Z=0.001 [PrintingService.cs@1524] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loaded prepared data from /home/SLS4All/.PrivateData/SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater/analysis_2025-10-21_00-57-47.0DF7023A24F0264E1569792DD4916C75BEE131F0.prepared.json [SoftAnalysisSurfaceHeater.cs@413] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Starting heater [SoftAnalysisSurfaceHeater.cs@733] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin heating (soft heater running = True) [PrintingService.cs@2490] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Exiting run layers task [ControlledHeating.cs@529] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 0, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.4699053301309427E-05, Elapsed = 00:00:00.0081556, TimeTotal = 09:10:19.8890642, Remaining = 09:10:19.8809086, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:18.1849638, WeightTotalEstimate = 03:12:18.1849638, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:17.0237658, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:00.0081556, HeatingEstimate = 01:10:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:00.7378758, WeightEstimate = 03:12:18.1849638 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:27:54. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: Progress;StartedAtUtc;Elapsed;TimeTotal;Remaining;Incomplete;SoftCount;LayerPrintDone;WeightsDone;WeightDone;WeightTotal;WeightTotalEstimate;LayerRecoatElapsed;LayerRecoatDelays;LayerRecoatPrintLayersElapsed;LayerRecoatNoDelayAverage;StreamingElapsed;ObjectLayerOverheadAverageDuration;TimeLayers;CoolingElapsed;CoolingEstimate;HeatingElapsed;HeatingEstimate;HeatingEstimate2;HeatingEstimate3;CoolingFrom;BedPreparationElapsed;BedPreparationTotal;PrintCapElapsed;PrintCapTotal;JobElapsed;JobTotal [PrintingService.cs@1916] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4699053301309427E-05;StartedAtUtc;00:00:00.0081556;09:10:19.8890642;09:10:19.8809086;False;408;0;0;00:00:00;03:12:18.1849638;03:12:18.1849638;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:17.0237658;00:00:00;02:05:42.8571428;00:00:00.0081556;01:10:00;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:00.7378758 [PrintingService.cs@1918] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Heat-up surface target 20 reached, setting surface run to 188 and after 00:45:00 to 188 [ControlledHeating.cs@566] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=30.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=27,powderChamber1=27,powderChamber2=27,powderChamber3=27,powderChamber4=27 [ControlledHeating.cs@169] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=27,printChamber1=27,printChamber2=27,printChamber3=27,printChamber4=27 [ControlledHeating.cs@169] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 30.652227783203124. Used = 30.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:17:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 1, start=0, count=408, Z=0.101 [PrintingService.cs@1518] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 146, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:17:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=2447, estimate=0.9430788769769569 for layer 1, Z=0.101 [PrintingService.cs@1524] 08/08/2026 15:17:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 3 [PrintingService.cs@1569] 08/08/2026 15:17:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 2, start=0, count=408, Z=0.201 [PrintingService.cs@1518] 08/08/2026 15:17:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 203, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=7637, estimate=2.3010700986367847 for layer 2, Z=0.201 [PrintingService.cs@1524] 08/08/2026 15:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 3 [PrintingService.cs@1569] 08/08/2026 15:17:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 3, start=0, count=408, Z=0.301 [PrintingService.cs@1518] 08/08/2026 15:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 255, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=11126, estimate=2.754313297733815 for layer 3, Z=0.301 [PrintingService.cs@1524] 08/08/2026 15:17:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 3 [PrintingService.cs@1569] 08/08/2026 15:17:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 4, start=0, count=408, Z=0.401 [PrintingService.cs@1518] 08/08/2026 15:17:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 274, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=28,powderChamber1=28,powderChamber2=28,powderChamber3=28,powderChamber4=28 [ControlledHeating.cs@169] 08/08/2026 15:17:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=31.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:17:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 7.5238733, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.022823183769065433, Elapsed = 00:00:07.5362888, TimeTotal = 09:10:20.3221262, Remaining = 09:10:12.7858374, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:18.6137659, WeightTotalEstimate = 03:12:18.6137659, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:17.4525679, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:07.5362888, HeatingEstimate = 01:09:52.4761267, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:01.1666779, WeightEstimate = 03:12:18.6137659 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:27:54. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:17:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.022823183769065433;StartedAtUtc;00:00:07.5362888;09:10:20.3221262;09:10:12.7858374;False;408;0;0;00:00:00;03:12:18.6137659;03:12:18.6137659;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:17.4525679;00:00:00;02:05:42.8571428;00:00:07.5362888;01:09:52.4761267;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:01.1666779 [PrintingService.cs@1918] 08/08/2026 15:17:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=28,printChamber1=28,printChamber2=28,printChamber3=28,printChamber4=28 [ControlledHeating.cs@169] 08/08/2026 15:17:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 31.652227783203124. Used = 31.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:17:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=14953, estimate=4.055561376821574 for layer 4, Z=0.401 [PrintingService.cs@1524] 08/08/2026 15:17:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 7 [PrintingService.cs@1569] 08/08/2026 15:17:44 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 5, start=0, count=408, Z=0.501 [PrintingService.cs@1518] 08/08/2026 15:17:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 323, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=21072, estimate=4.822250664622606 for layer 5, Z=0.501 [PrintingService.cs@1524] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 7 [PrintingService.cs@1569] 08/08/2026 15:17:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 6, start=0, count=408, Z=0.601 [PrintingService.cs@1518] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 341, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=32.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=29,powderChamber1=29,powderChamber2=29,powderChamber3=29,powderChamber4=29 [ControlledHeating.cs@169] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 32.652227783203124. Used = 32.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 15.0272891, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.04554581025281229, Elapsed = 00:00:15.0396745, TimeTotal = 09:10:20.9835252, Remaining = 09:10:05.9438507, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:19.2751950, WeightTotalEstimate = 03:12:19.2751950, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:18.1139970, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:15.0396745, HeatingEstimate = 01:09:44.9727109, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:01.8281070, WeightEstimate = 03:12:19.2751950 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:27:55. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.04554581025281229;StartedAtUtc;00:00:15.0396745;09:10:20.9835252;09:10:05.9438507;False;408;0;0;00:00:00;03:12:19.2751950;03:12:19.2751950;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:18.1139970;00:00:00;02:05:42.8571428;00:00:15.0396745;01:09:44.9727109;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:01.8281070 [PrintingService.cs@1918] 08/08/2026 15:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=29,printChamber1=29,printChamber2=29,printChamber3=29,printChamber4=29 [ControlledHeating.cs@169] 08/08/2026 15:17:49 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:17:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=22518, estimate=12.787800998909425 for layer 6, Z=0.601 [PrintingService.cs@1524] 08/08/2026 15:17:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 7 [PrintingService.cs@1569] 08/08/2026 15:17:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 7, start=0, count=408, Z=0.701 [PrintingService.cs@1518] 08/08/2026 15:17:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 351, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 29 with temperature 28.5 [HeaterCheck.cs@67] 08/08/2026 15:17:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=28001, estimate=6.289289132553505 for layer 7, Z=0.701 [PrintingService.cs@1524] 08/08/2026 15:17:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 3, island count 7 [PrintingService.cs@1569] 08/08/2026 15:17:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 8, start=0, count=408, Z=0.801 [PrintingService.cs@1518] 08/08/2026 15:17:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 371, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=33.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=30,powderChamber1=30,powderChamber2=30,powderChamber3=30,powderChamber4=30 [ControlledHeating.cs@169] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 33.652227783203124. Used = 33.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 22.5306988, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.06825155863618736, Elapsed = 00:00:22.5430701, TimeTotal = 09:10:29.3850433, Remaining = 09:10:06.8419732, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:27.6767272, WeightTotalEstimate = 03:12:27.6767272, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:26.5155292, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:22.5430701, HeatingEstimate = 01:09:37.4693012, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:10.2296392, WeightEstimate = 03:12:27.6767272 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:03. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.06825155863618736;StartedAtUtc;00:00:22.5430701;09:10:29.3850433;09:10:06.8419732;False;408;0;0;00:00:00;03:12:27.6767272;03:12:27.6767272;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:26.5155292;00:00:00;02:05:42.8571428;00:00:22.5430701;01:09:37.4693012;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:10.2296392 [PrintingService.cs@1918] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=30,printChamber1=30,printChamber2=30,printChamber3=30,printChamber4=30 [ControlledHeating.cs@169] 08/08/2026 15:17:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.1130444 ~ 5.92 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:17:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=27112, estimate=11.785585960374394 for layer 8, Z=0.801 [PrintingService.cs@1524] 08/08/2026 15:17:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 4, island count 7 [PrintingService.cs@1569] 08/08/2026 15:17:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 9, start=0, count=408, Z=0.901 [PrintingService.cs@1518] 08/08/2026 15:17:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 379, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:17:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 30 with temperature 29 [HeaterCheck.cs@67] 08/08/2026 15:18:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 30 with temperature 29.25 [HeaterCheck.cs@67] 08/08/2026 15:18:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=34318, estimate=7.53830134848274 for layer 9, Z=0.901 [PrintingService.cs@1524] 08/08/2026 15:18:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 5, island count 7 [PrintingService.cs@1569] 08/08/2026 15:18:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 10, start=0, count=408, Z=1.001 [PrintingService.cs@1518] 08/08/2026 15:18:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 383, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=34.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=31,powderChamber1=31,powderChamber2=31,powderChamber3=31,powderChamber4=31 [ControlledHeating.cs@169] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 34.652227783203124. Used = 34.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 30.0350752, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.0909630204259857, Elapsed = 00:00:30.0491902, TimeTotal = 09:10:34.5123318, Remaining = 09:10:04.4631416, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:32.8022720, WeightTotalEstimate = 03:12:32.8022720, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:31.6410740, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:30.0491902, HeatingEstimate = 01:09:29.9649248, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:15.3551840, WeightEstimate = 03:12:32.8022720 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:08. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.0909630204259857;StartedAtUtc;00:00:30.0491902;09:10:34.5123318;09:10:04.4631416;False;408;0;0;00:00:00;03:12:32.8022720;03:12:32.8022720;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:31.6410740;00:00:00;02:05:42.8571428;00:00:30.0491902;01:09:29.9649248;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:15.3551840 [PrintingService.cs@1918] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=31,printChamber1=31,printChamber2=31,printChamber3=31,printChamber4=31 [ControlledHeating.cs@169] 08/08/2026 15:18:04 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 08/08/2026 15:18:04 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:18:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=31297, estimate=11.95640666175094 for layer 10, Z=1.001 [PrintingService.cs@1524] 08/08/2026 15:18:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 6, island count 7 [PrintingService.cs@1569] 08/08/2026 15:18:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 11, start=0, count=408, Z=1.1010001 [PrintingService.cs@1518] 08/08/2026 15:18:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 422, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 31 with temperature 30.75 [HeaterCheck.cs@67] 08/08/2026 15:18:11 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:18:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=32,powderChamber1=32,powderChamber2=32,powderChamber3=32,powderChamber4=32 [ControlledHeating.cs@169] 08/08/2026 15:18:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=35.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 35.652227783203124. Used = 35.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 37.540806, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.11366552205388397, Elapsed = 00:00:37.5531668, TimeTotal = 09:10:38.3093496, Remaining = 09:10:00.7561828, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:36.6010440, WeightTotalEstimate = 03:12:36.6010440, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:35.4398460, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:37.5531668, HeatingEstimate = 01:09:22.4591940, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:19.1539560, WeightEstimate = 03:12:36.6010440 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:12. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.11366552205388397;StartedAtUtc;00:00:37.5531668;09:10:38.3093496;09:10:00.7561828;False;408;0;0;00:00:00;03:12:36.6010440;03:12:36.6010440;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:35.4398460;00:00:00;02:05:42.8571428;00:00:37.5531668;01:09:22.4591940;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:19.1539560 [PrintingService.cs@1918] 08/08/2026 15:18:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=32,printChamber1=32,printChamber2=32,printChamber3=32,printChamber4=32 [ControlledHeating.cs@169] 08/08/2026 15:18:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=41190, estimate=8.952704987268588 for layer 11, Z=1.1010001 [PrintingService.cs@1524] 08/08/2026 15:18:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 8 [PrintingService.cs@1569] 08/08/2026 15:18:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 12, start=0, count=408, Z=1.2010001 [PrintingService.cs@1518] 08/08/2026 15:18:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 457, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32 with temperature 28 [HeaterCheck.cs@67] 08/08/2026 15:18:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=40966, estimate=14.573489670851691 for layer 12, Z=1.2010001 [PrintingService.cs@1524] 08/08/2026 15:18:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 8 [PrintingService.cs@1569] 08/08/2026 15:18:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 13, start=0, count=408, Z=1.3010001 [PrintingService.cs@1518] 08/08/2026 15:18:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 456, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=33,powderChamber1=33,powderChamber2=33,powderChamber3=33,powderChamber4=33 [ControlledHeating.cs@169] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=36.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 36.652227783203124. Used = 36.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 45.0459265, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.13636002480919132, Elapsed = 00:00:45.0582881, TimeTotal = 09:10:43.6197581, Remaining = 09:09:58.5614700, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:41.9114517, WeightTotalEstimate = 03:12:41.9114517, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:40.7502537, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:45.0582881, HeatingEstimate = 01:09:14.9540735, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:24.4643637, WeightEstimate = 03:12:41.9114517 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:17. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.13636002480919132;StartedAtUtc;00:00:45.0582881;09:10:43.6197581;09:09:58.5614700;False;408;0;0;00:00:00;03:12:41.9114517;03:12:41.9114517;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:40.7502537;00:00:00;02:05:42.8571428;00:00:45.0582881;01:09:14.9540735;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:24.4643637 [PrintingService.cs@1918] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=33,printChamber1=33,printChamber2=33,printChamber3=33,printChamber4=33 [ControlledHeating.cs@169] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 33 with temperature 33 [HeaterCheck.cs@67] 08/08/2026 15:18:19 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 33 with temperature 27.75 [HeaterCheck.cs@88] 08/08/2026 15:18:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.5 [HeaterCheck.cs@67] 08/08/2026 15:18:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.25 [HeaterCheck.cs@67] 08/08/2026 15:18:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.25 [HeaterCheck.cs@67] 08/08/2026 15:18:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 15:18:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 15:18:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.25 [HeaterCheck.cs@67] 08/08/2026 15:18:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.25 [HeaterCheck.cs@67] 08/08/2026 15:18:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28 [HeaterCheck.cs@67] 08/08/2026 15:18:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.75 [HeaterCheck.cs@67] 08/08/2026 15:18:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.5 [HeaterCheck.cs@67] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33 with temperature 28.25 [HeaterCheck.cs@67] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=37.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=34,powderChamber1=34,powderChamber2=34,powderChamber3=34,powderChamber4=34 [ControlledHeating.cs@169] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 37.652227783203124. Used = 37.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 52.5473213, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.1590615298144975, Elapsed = 00:00:52.5596871, TimeTotal = 09:10:43.6197623, Remaining = 09:09:51.0600752, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:41.9114517, WeightTotalEstimate = 03:12:41.9114517, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:40.7502537, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:00:52.5596871, HeatingEstimate = 01:09:07.4526787, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:24.4643637, WeightEstimate = 03:12:41.9114517 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:17. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.1590615298144975;StartedAtUtc;00:00:52.5596871;09:10:43.6197623;09:09:51.0600752;False;408;0;0;00:00:00;03:12:41.9114517;03:12:41.9114517;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:40.7502537;00:00:00;02:05:42.8571428;00:00:52.5596871;01:09:07.4526787;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:24.4643637 [PrintingService.cs@1918] 08/08/2026 15:18:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=34,printChamber1=34,printChamber2=34,printChamber3=34,printChamber4=34 [ControlledHeating.cs@169] 08/08/2026 15:18:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=52738, estimate=11.354893226512635 for layer 13, Z=1.3010001 [PrintingService.cs@1524] 08/08/2026 15:18:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 8 [PrintingService.cs@1569] 08/08/2026 15:18:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 14, start=0, count=408, Z=1.401 [PrintingService.cs@1518] 08/08/2026 15:18:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 461, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 34 with temperature 36 [HeaterCheck.cs@67] 08/08/2026 15:18:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 34 with temperature 30 [HeaterCheck.cs@67] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=50290, estimate=16.921618881161663 for layer 14, Z=1.401 [PrintingService.cs@1524] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 3, island count 8 [PrintingService.cs@1569] 08/08/2026 15:18:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 15, start=0, count=408, Z=1.501 [PrintingService.cs@1518] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 483, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=38.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=35,powderChamber1=35,powderChamber2=35,powderChamber3=35,powderChamber4=35 [ControlledHeating.cs@169] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 38.652227783203124. Used = 38.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 60.0482395, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.1817253052441521, Elapsed = 00:01:00.0606106, TimeTotal = 09:10:50.2185809, Remaining = 09:09:50.1579703, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:48.5102650, WeightTotalEstimate = 03:12:48.5102650, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:47.3490670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:00.0606106, HeatingEstimate = 01:08:59.9517605, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:31.0631770, WeightEstimate = 03:12:48.5102650 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:24. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.1817253052441521;StartedAtUtc;00:01:00.0606106;09:10:50.2185809;09:09:50.1579703;False;408;0;0;00:00:00;03:12:48.5102650;03:12:48.5102650;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:47.3490670;00:00:00;02:05:42.8571428;00:01:00.0606106;01:08:59.9517605;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:31.0631770 [PrintingService.cs@1918] 08/08/2026 15:18:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=35,printChamber1=35,printChamber2=35,printChamber3=35,printChamber4=35 [ControlledHeating.cs@169] 08/08/2026 15:18:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 35 with temperature 35.75 [HeaterCheck.cs@67] 08/08/2026 15:18:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=39.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=36,powderChamber1=36,powderChamber2=36,powderChamber3=36,powderChamber4=36 [ControlledHeating.cs@169] 08/08/2026 15:18:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 39.652227783203124. Used = 39.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 67.5468675, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.204413840019879, Elapsed = 00:01:07.5592209, TimeTotal = 09:10:50.2185632, Remaining = 09:09:42.6593423, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:48.5102650, WeightTotalEstimate = 03:12:48.5102650, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:47.3490670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:07.5592209, HeatingEstimate = 01:08:52.4531325, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:31.0631770, WeightEstimate = 03:12:48.5102650 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:24. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.204413840019879;StartedAtUtc;00:01:07.5592209;09:10:50.2185632;09:09:42.6593423;False;408;0;0;00:00:00;03:12:48.5102650;03:12:48.5102650;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:47.3490670;00:00:00;02:05:42.8571428;00:01:07.5592209;01:08:52.4531325;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:31.0631770 [PrintingService.cs@1918] 08/08/2026 15:18:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=36,printChamber1=36,printChamber2=36,printChamber3=36,printChamber4=36 [ControlledHeating.cs@169] 08/08/2026 15:18:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=64361, estimate=13.51578809021481 for layer 15, Z=1.501 [PrintingService.cs@1524] 08/08/2026 15:18:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 4, island count 8 [PrintingService.cs@1569] 08/08/2026 15:18:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 16, start=0, count=408, Z=1.6010001 [PrintingService.cs@1518] 08/08/2026 15:18:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 535, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 36 with temperature 37 [HeaterCheck.cs@67] 08/08/2026 15:18:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=40.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=37,powderChamber1=37,powderChamber2=37,powderChamber3=37,powderChamber4=37 [ControlledHeating.cs@169] 08/08/2026 15:18:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 40.652227783203124. Used = 40.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 75.0491146, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.22709669655618742, Elapsed = 00:01:15.0617404, TimeTotal = 09:10:52.7663054, Remaining = 09:09:37.7045650, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:12:51.0577348, WeightTotalEstimate = 03:12:51.0577348, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:54:49.8965368, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:15.0617404, HeatingEstimate = 01:08:44.9508854, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:33.6106468, WeightEstimate = 03:12:51.0577348 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:27. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.22709669655618742;StartedAtUtc;00:01:15.0617404;09:10:52.7663054;09:09:37.7045650;False;408;0;0;00:00:00;03:12:51.0577348;03:12:51.0577348;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:54:49.8965368;00:00:00;02:05:42.8571428;00:01:15.0617404;01:08:44.9508854;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:33.6106468 [PrintingService.cs@1918] 08/08/2026 15:18:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=37,printChamber1=37,printChamber2=37,printChamber3=37,printChamber4=37 [ControlledHeating.cs@169] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=62152, estimate=19.72410167990409 for layer 16, Z=1.6010001 [PrintingService.cs@1524] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 5, island count 8 [PrintingService.cs@1569] 08/08/2026 15:18:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 17, start=0, count=408, Z=1.7010001 [PrintingService.cs@1518] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 541, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:18:56 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=38,powderChamber1=38,powderChamber2=38,powderChamber3=38,powderChamber4=38 [ControlledHeating.cs@169] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=41.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 41.652227783203124. Used = 41.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 82.5519713, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.24971660736239001, Elapsed = 00:01:22.5644264, TimeTotal = 09:11:03.2500866, Remaining = 09:09:40.6856602, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:01.5416867, WeightTotalEstimate = 03:13:01.5416867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:00.3804887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:22.5644264, HeatingEstimate = 01:08:37.4480287, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:44.0945987, WeightEstimate = 03:13:01.5416867 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:37. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.24971660736239001;StartedAtUtc;00:01:22.5644264;09:11:03.2500866;09:09:40.6856602;False;408;0;0;00:00:00;03:13:01.5416867;03:13:01.5416867;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:00.3804887;00:00:00;02:05:42.8571428;00:01:22.5644264;01:08:37.4480287;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:44.0945987 [PrintingService.cs@1918] 08/08/2026 15:18:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=38,printChamber1=38,printChamber2=38,printChamber3=38,printChamber4=38 [ControlledHeating.cs@169] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=42.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=39,powderChamber1=39,powderChamber2=39,powderChamber3=39,powderChamber4=39 [ControlledHeating.cs@169] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 42.652227783203124. Used = 42.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 90.0550982, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.27241027391543726, Elapsed = 00:01:30.0676905, TimeTotal = 09:11:03.2502238, Remaining = 09:09:33.1825333, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:01.5416867, WeightTotalEstimate = 03:13:01.5416867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:00.3804887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:30.0676905, HeatingEstimate = 01:08:29.9449018, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:44.0945987, WeightEstimate = 03:13:01.5416867 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:37. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.27241027391543726;StartedAtUtc;00:01:30.0676905;09:11:03.2502238;09:09:33.1825333;False;408;0;0;00:00:00;03:13:01.5416867;03:13:01.5416867;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:00.3804887;00:00:00;02:05:42.8571428;00:01:30.0676905;01:08:29.9449018;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:44.0945987 [PrintingService.cs@1918] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=39,printChamber1=39,printChamber2=39,printChamber3=39,printChamber4=39 [ControlledHeating.cs@169] 08/08/2026 15:19:04 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 08/08/2026 15:19:04 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:19:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=80923, estimate=26.16531770927994 for layer 17, Z=1.7010001 [PrintingService.cs@1524] 08/08/2026 15:19:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 6, island count 8 [PrintingService.cs@1569] 08/08/2026 15:19:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 18, start=0, count=408, Z=1.8010001 [PrintingService.cs@1518] 08/08/2026 15:19:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 540, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:19:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 39 with temperature 39 [HeaterCheck.cs@67] 08/08/2026 15:19:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=43.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=40,powderChamber1=40,powderChamber2=40,powderChamber3=40,powderChamber4=40 [ControlledHeating.cs@169] 08/08/2026 15:19:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 43.652227783203124. Used = 43.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 97.5634839, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.2951175172668646, Elapsed = 00:01:37.5760974, TimeTotal = 09:11:03.4719022, Remaining = 09:09:25.8958048, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:01.7633439, WeightTotalEstimate = 03:13:01.7633439, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:00.6021459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:37.5760974, HeatingEstimate = 01:08:22.4365161, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:44.3162559, WeightEstimate = 03:13:01.7633439 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:37. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.2951175172668646;StartedAtUtc;00:01:37.5760974;09:11:03.4719022;09:09:25.8958048;False;408;0;0;00:00:00;03:13:01.7633439;03:13:01.7633439;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:00.6021459;00:00:00;02:05:42.8571428;00:01:37.5760974;01:08:22.4365161;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:44.3162559 [PrintingService.cs@1918] 08/08/2026 15:19:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=40,printChamber1=40,printChamber2=40,printChamber3=40,printChamber4=40 [ControlledHeating.cs@169] 08/08/2026 15:19:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:19:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:19:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:19:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:19:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:19:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:19:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=70326, estimate=22.384158935200794 for layer 18, Z=1.8010001 [PrintingService.cs@1524] 08/08/2026 15:19:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 7, island count 8 [PrintingService.cs@1569] 08/08/2026 15:19:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 19, start=0, count=408, Z=1.901 [PrintingService.cs@1518] 08/08/2026 15:19:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 545, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:19:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=44.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=28.75 that are outside of set tolerance 10 for current step target 40 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:19:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 44.652227783203124. Used = 44.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 105.0700894, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.3178203970613447, Elapsed = 00:01:45.0824569, TimeTotal = 09:11:03.4716562, Remaining = 09:09:18.3891993, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:01.7633439, WeightTotalEstimate = 03:13:01.7633439, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:00.6021459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:45.0824569, HeatingEstimate = 01:08:14.9299106, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:44.3162559, WeightEstimate = 03:13:01.7633439 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:37. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3178203970613447;StartedAtUtc;00:01:45.0824569;09:11:03.4716562;09:09:18.3891993;False;408;0;0;00:00:00;03:13:01.7633439;03:13:01.7633439;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:00.6021459;00:00:00;02:05:42.8571428;00:01:45.0824569;01:08:14.9299106;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:44.3162559 [PrintingService.cs@1918] 08/08/2026 15:19:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=41,printChamber1=41,printChamber2=41,printChamber3=41,printChamber4=41 [ControlledHeating.cs@169] 08/08/2026 15:19:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0343551 ~ 6.03 samples/sec, 27 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:19:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=45.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 45.652227783203124. Used = 45.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 112.5717115, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.340508884368872, Elapsed = 00:01:52.5840584, TimeTotal = 09:11:03.4716356, Remaining = 09:09:10.8875772, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:01.7633439, WeightTotalEstimate = 03:13:01.7633439, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:00.6021459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:01:52.5840584, HeatingEstimate = 01:08:07.4282885, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:44.3162559, WeightEstimate = 03:13:01.7633439 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:37. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.340508884368872;StartedAtUtc;00:01:52.5840584;09:11:03.4716356;09:09:10.8875772;False;408;0;0;00:00:00;03:13:01.7633439;03:13:01.7633439;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:00.6021459;00:00:00;02:05:42.8571428;00:01:52.5840584;01:08:07.4282885;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:44.3162559 [PrintingService.cs@1918] 08/08/2026 15:19:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=42,printChamber1=42,printChamber2=42,printChamber3=42,printChamber4=42 [ControlledHeating.cs@169] 08/08/2026 15:19:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=90401, estimate=28.081706865825215 for layer 19, Z=1.901 [PrintingService.cs@1524] 08/08/2026 15:19:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 8, island count 8 [PrintingService.cs@1569] 08/08/2026 15:19:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 20, start=0, count=408, Z=2.001 [PrintingService.cs@1518] 08/08/2026 15:19:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 575, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:19:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=46.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 46.652227783203124. Used = 46.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 120.074745, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.36318752861914666, Elapsed = 00:02:00.0871034, TimeTotal = 09:11:04.7651522, Remaining = 09:09:04.6780488, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:03.0568490, WeightTotalEstimate = 03:13:03.0568490, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:01.8956510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:00.0871034, HeatingEstimate = 01:07:59.9252550, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:45.6097610, WeightEstimate = 03:13:03.0568490 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:39. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.36318752861914666;StartedAtUtc;00:02:00.0871034;09:11:04.7651522;09:09:04.6780488;False;408;0;0;00:00:00;03:13:03.0568490;03:13:03.0568490;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:01.8956510;00:00:00;02:05:42.8571428;00:02:00.0871034;01:07:59.9252550;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:45.6097610 [PrintingService.cs@1918] 08/08/2026 15:19:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=43,printChamber1=43,printChamber2=43,printChamber3=43,printChamber4=43 [ControlledHeating.cs@169] 08/08/2026 15:19:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 43 with temperature 41.75 [HeaterCheck.cs@67] 08/08/2026 15:19:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 43 with temperature 41.5 [HeaterCheck.cs@67] 08/08/2026 15:19:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=76333, estimate=23.401399827801754 for layer 20, Z=2.001 [PrintingService.cs@1524] 08/08/2026 15:19:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 9, island count 8 [PrintingService.cs@1569] 08/08/2026 15:19:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 21, start=0, count=408, Z=2.101 [PrintingService.cs@1518] 08/08/2026 15:19:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 604, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:19:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=47.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 47.652227783203124. Used = 47.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 127.5745056, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.385869516595819, Elapsed = 00:02:07.5868494, TimeTotal = 09:11:04.7651376, Remaining = 09:08:57.1782882, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:03.0568490, WeightTotalEstimate = 03:13:03.0568490, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:01.8956510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:07.5868494, HeatingEstimate = 01:07:52.4254944, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:45.6097610, WeightEstimate = 03:13:03.0568490 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:39. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.385869516595819;StartedAtUtc;00:02:07.5868494;09:11:04.7651376;09:08:57.1782882;False;408;0;0;00:00:00;03:13:03.0568490;03:13:03.0568490;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:01.8956510;00:00:00;02:05:42.8571428;00:02:07.5868494;01:07:52.4254944;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:45.6097610 [PrintingService.cs@1918] 08/08/2026 15:19:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=44,printChamber1=44,printChamber2=44,printChamber3=44,printChamber4=44 [ControlledHeating.cs@169] 08/08/2026 15:19:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=48.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 48.652227783203124. Used = 48.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 135.0747351, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.4085537564431566, Elapsed = 00:02:15.0873411, TimeTotal = 09:11:04.7653998, Remaining = 09:08:49.6780587, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:03.0568490, WeightTotalEstimate = 03:13:03.0568490, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:01.8956510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:15.0873411, HeatingEstimate = 01:07:44.9252649, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:45.6097610, WeightEstimate = 03:13:03.0568490 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:39. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4085537564431566;StartedAtUtc;00:02:15.0873411;09:11:04.7653998;09:08:49.6780587;False;408;0;0;00:00:00;03:13:03.0568490;03:13:03.0568490;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:01.8956510;00:00:00;02:05:42.8571428;00:02:15.0873411;01:07:44.9252649;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:45.6097610 [PrintingService.cs@1918] 08/08/2026 15:19:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=45,printChamber1=45,printChamber2=45,printChamber3=45,printChamber4=45 [ControlledHeating.cs@169] 08/08/2026 15:19:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=97991, estimate=29.625962642071826 for layer 21, Z=2.101 [PrintingService.cs@1524] 08/08/2026 15:19:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 10, island count 8 [PrintingService.cs@1569] 08/08/2026 15:19:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 22, start=0, count=408, Z=2.201 [PrintingService.cs@1518] 08/08/2026 15:19:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 588, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:19:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=41,powderChamber1=41,powderChamber2=41,powderChamber3=41,powderChamber4=41 [ControlledHeating.cs@169] 08/08/2026 15:19:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=49.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:19:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 49.652227783203124. Used = 49.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:19:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 142.5756304, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.43123861531099694, Elapsed = 00:02:22.5880356, TimeTotal = 09:11:04.7651990, Remaining = 09:08:42.1771634, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:03.0568490, WeightTotalEstimate = 03:13:03.0568490, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:01.8956510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:22.5880356, HeatingEstimate = 01:07:37.4243696, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:45.6097610, WeightEstimate = 03:13:03.0568490 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:39. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:19:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.43123861531099694;StartedAtUtc;00:02:22.5880356;09:11:04.7651990;09:08:42.1771634;False;408;0;0;00:00:00;03:13:03.0568490;03:13:03.0568490;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:01.8956510;00:00:00;02:05:42.8571428;00:02:22.5880356;01:07:37.4243696;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:45.6097610 [PrintingService.cs@1918] 08/08/2026 15:19:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=46,printChamber1=46,printChamber2=46,printChamber3=46,printChamber4=46 [ControlledHeating.cs@169] 08/08/2026 15:19:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=42,powderChamber1=42,powderChamber2=42,powderChamber3=42,powderChamber4=42 [ControlledHeating.cs@169] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=84607, estimate=25.515939810855045 for layer 22, Z=2.201 [PrintingService.cs@1524] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 11, island count 8 [PrintingService.cs@1569] 08/08/2026 15:20:04 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 23, start=0, count=408, Z=2.3009999 [PrintingService.cs@1518] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 600, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=50.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 50.652227783203124. Used = 50.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 150.0803083, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.4539504017526045, Elapsed = 00:02:30.0976569, TimeTotal = 09:11:04.7701424, Remaining = 09:08:34.6724855, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:03.0568490, WeightTotalEstimate = 03:13:03.0568490, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:01.8956510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:30.0976569, HeatingEstimate = 01:07:29.9196917, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:45.6097610, WeightEstimate = 03:13:03.0568490 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:39. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4539504017526045;StartedAtUtc;00:02:30.0976569;09:11:04.7701424;09:08:34.6724855;False;408;0;0;00:00:00;03:13:03.0568490;03:13:03.0568490;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:01.8956510;00:00:00;02:05:42.8571428;00:02:30.0976569;01:07:29.9196917;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:45.6097610 [PrintingService.cs@1918] 08/08/2026 15:20:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=47,printChamber1=47,printChamber2=47,printChamber3=47,printChamber4=47 [ControlledHeating.cs@169] 08/08/2026 15:20:07 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=29.75 that are outside of set tolerance 10 for current step target 42 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:20:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=51.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 51.652227783203124. Used = 51.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 157.587981, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.4766412843439253, Elapsed = 00:02:37.6003212, TimeTotal = 09:11:04.7651340, Remaining = 09:08:27.1648128, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:03.0568490, WeightTotalEstimate = 03:13:03.0568490, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:01.8956510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:37.6003212, HeatingEstimate = 01:07:22.4120190, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:45.6097610, WeightEstimate = 03:13:03.0568490 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:39. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4766412843439253;StartedAtUtc;00:02:37.6003212;09:11:04.7651340;09:08:27.1648128;False;408;0;0;00:00:00;03:13:03.0568490;03:13:03.0568490;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:01.8956510;00:00:00;02:05:42.8571428;00:02:37.6003212;01:07:22.4120190;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:45.6097610 [PrintingService.cs@1918] 08/08/2026 15:20:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=48,printChamber1=48,printChamber2=48,printChamber3=48,printChamber4=48 [ControlledHeating.cs@169] 08/08/2026 15:20:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=108118, estimate=31.0503514659356 for layer 23, Z=2.3009999 [PrintingService.cs@1524] 08/08/2026 15:20:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 12, island count 8 [PrintingService.cs@1569] 08/08/2026 15:20:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 24, start=0, count=408, Z=2.401 [PrintingService.cs@1518] 08/08/2026 15:20:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:20:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=52.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 52.652227783203124. Used = 52.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 165.0895161, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.49926001165429806, Elapsed = 00:02:45.1020717, TimeTotal = 09:11:09.3562164, Remaining = 09:08:24.2541447, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:07.6477160, WeightTotalEstimate = 03:13:07.6477160, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:06.4865180, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:45.1020717, HeatingEstimate = 01:07:14.9104839, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:50.2006280, WeightEstimate = 03:13:07.6477160 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:43. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.49926001165429806;StartedAtUtc;00:02:45.1020717;09:11:09.3562164;09:08:24.2541447;False;408;0;0;00:00:00;03:13:07.6477160;03:13:07.6477160;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:06.4865180;00:00:00;02:05:42.8571428;00:02:45.1020717;01:07:14.9104839;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:50.2006280 [PrintingService.cs@1918] 08/08/2026 15:20:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=49,printChamber1=49,printChamber2=49,printChamber3=49,printChamber4=49 [ControlledHeating.cs@169] 08/08/2026 15:20:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0013090 ~ 6.02 samples/sec, 27 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:20:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=43,powderChamber1=43,powderChamber2=43,powderChamber3=43,powderChamber4=43 [ControlledHeating.cs@169] 08/08/2026 15:20:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=53.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 53.652227783203124. Used = 53.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 172.5917084, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.5219502731963785, Elapsed = 00:02:52.6056021, TimeTotal = 09:11:09.3575545, Remaining = 09:08:16.7519524, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:07.6477160, WeightTotalEstimate = 03:13:07.6477160, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:06.4865180, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:02:52.6056021, HeatingEstimate = 01:07:07.4082916, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:50.2006280, WeightEstimate = 03:13:07.6477160 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:43. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5219502731963785;StartedAtUtc;00:02:52.6056021;09:11:09.3575545;09:08:16.7519524;False;408;0;0;00:00:00;03:13:07.6477160;03:13:07.6477160;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:06.4865180;00:00:00;02:05:42.8571428;00:02:52.6056021;01:07:07.4082916;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:50.2006280 [PrintingService.cs@1918] 08/08/2026 15:20:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=50,printChamber1=50,printChamber2=50,printChamber3=50,printChamber4=50 [ControlledHeating.cs@169] 08/08/2026 15:20:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=90572, estimate=26.95338760323824 for layer 24, Z=2.401 [PrintingService.cs@1524] 08/08/2026 15:20:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 13, island count 8 [PrintingService.cs@1569] 08/08/2026 15:20:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 25, start=0, count=408, Z=2.501 [PrintingService.cs@1518] 08/08/2026 15:20:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 641, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:20:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=32 that are outside of set tolerance 10 for current step target 43 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:20:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=54.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 54.652227783203124. Used = 54.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 180.0961388, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.5445614368296126, Elapsed = 00:03:00.1085009, TimeTotal = 09:11:14.0461441, Remaining = 09:08:13.9376432, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:12.3378372, WeightTotalEstimate = 03:13:12.3378372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:11.1766392, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:00.1085009, HeatingEstimate = 01:06:59.9038612, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:54.8907492, WeightEstimate = 03:13:12.3378372 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:48. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5445614368296126;StartedAtUtc;00:03:00.1085009;09:11:14.0461441;09:08:13.9376432;False;408;0;0;00:00:00;03:13:12.3378372;03:13:12.3378372;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:11.1766392;00:00:00;02:05:42.8571428;00:03:00.1085009;01:06:59.9038612;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:54.8907492 [PrintingService.cs@1918] 08/08/2026 15:20:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=51,printChamber1=51,printChamber2=51,printChamber3=51,printChamber4=51 [ControlledHeating.cs@169] 08/08/2026 15:20:37 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 08/08/2026 15:20:37 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 08/08/2026 15:20:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=55.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 55.652227783203124. Used = 55.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 187.599479, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.5672480059845396, Elapsed = 00:03:07.6118674, TimeTotal = 09:11:14.0461704, Remaining = 09:08:06.4343030, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:12.3378372, WeightTotalEstimate = 03:13:12.3378372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:11.1766392, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:07.6118674, HeatingEstimate = 01:06:52.4005210, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:54.8907492, WeightEstimate = 03:13:12.3378372 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:48. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5672480059845396;StartedAtUtc;00:03:07.6118674;09:11:14.0461704;09:08:06.4343030;False;408;0;0;00:00:00;03:13:12.3378372;03:13:12.3378372;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:11.1766392;00:00:00;02:05:42.8571428;00:03:07.6118674;01:06:52.4005210;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:54.8907492 [PrintingService.cs@1918] 08/08/2026 15:20:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=52,printChamber1=52,printChamber2=52,printChamber3=52,printChamber4=52 [ControlledHeating.cs@169] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=56.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 56.652227783203124. Used = 56.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 195.1005233, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.5899274305230565, Elapsed = 00:03:15.1128705, TimeTotal = 09:11:14.0461292, Remaining = 09:07:58.9332587, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:12.3378372, WeightTotalEstimate = 03:13:12.3378372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:11.1766392, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:15.1128705, HeatingEstimate = 01:06:44.8994767, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:54.8907492, WeightEstimate = 03:13:12.3378372 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:48. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5899274305230565;StartedAtUtc;00:03:15.1128705;09:11:14.0461292;09:07:58.9332587;False;408;0;0;00:00:00;03:13:12.3378372;03:13:12.3378372;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:11.1766392;00:00:00;02:05:42.8571428;00:03:15.1128705;01:06:44.8994767;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:54.8907492 [PrintingService.cs@1918] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=53,printChamber1=53,printChamber2=53,printChamber3=53,printChamber4=53 [ControlledHeating.cs@169] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=115995, estimate=32.39148919269513 for layer 25, Z=2.501 [PrintingService.cs@1524] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 14, island count 8 [PrintingService.cs@1569] 08/08/2026 15:20:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 26, start=0, count=408, Z=2.601 [PrintingService.cs@1518] 08/08/2026 15:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 654, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:20:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 43 with temperature 30.75 [HeaterCheck.cs@111] 08/08/2026 15:20:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=57.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:20:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 57.652227783203124. Used = 57.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:20:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 202.6069695, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.6126198883906627, Elapsed = 00:03:22.6193292, TimeTotal = 09:11:14.2329852, Remaining = 09:07:51.6136560, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:12.5246807, WeightTotalEstimate = 03:13:12.5246807, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:11.3634827, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:22.6193292, HeatingEstimate = 01:06:37.3930305, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:55.0775927, WeightEstimate = 03:13:12.5246807 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:48. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:20:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6126198883906627;StartedAtUtc;00:03:22.6193292;09:11:14.2329852;09:07:51.6136560;False;408;0;0;00:00:00;03:13:12.5246807;03:13:12.5246807;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:11.3634827;00:00:00;02:05:42.8571428;00:03:22.6193292;01:06:37.3930305;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:55.0775927 [PrintingService.cs@1918] 08/08/2026 15:20:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=54,printChamber1=54,printChamber2=54,printChamber3=54,printChamber4=54 [ControlledHeating.cs@169] 08/08/2026 15:21:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=96021, estimate=28.418783264241288 for layer 26, Z=2.601 [PrintingService.cs@1524] 08/08/2026 15:21:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 15, island count 8 [PrintingService.cs@1569] 08/08/2026 15:21:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 27, start=0, count=408, Z=2.701 [PrintingService.cs@1518] 08/08/2026 15:21:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 650, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:21:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=58.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:21:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 58.652227783203124. Used = 58.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 210.1075937, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.6352091524735499, Elapsed = 00:03:30.1203238, TimeTotal = 09:11:18.9194365, Remaining = 09:07:48.7991127, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:17.2107616, WeightTotalEstimate = 03:13:17.2107616, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:16.0495636, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:30.1203238, HeatingEstimate = 01:06:29.8924063, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:59.7636736, WeightEstimate = 03:13:17.2107616 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:53. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6352091524735499;StartedAtUtc;00:03:30.1203238;09:11:18.9194365;09:07:48.7991127;False;408;0;0;00:00:00;03:13:17.2107616;03:13:17.2107616;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:16.0495636;00:00:00;02:05:42.8571428;00:03:30.1203238;01:06:29.8924063;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:59.7636736 [PrintingService.cs@1918] 08/08/2026 15:21:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=55,printChamber1=55,printChamber2=55,printChamber3=55,printChamber4=55 [ControlledHeating.cs@169] 08/08/2026 15:21:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=59.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:21:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 59.652227783203124. Used = 59.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 217.6076751, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.657881435748797, Elapsed = 00:03:37.6200679, TimeTotal = 09:11:18.9190992, Remaining = 09:07:41.2990313, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:17.2107616, WeightTotalEstimate = 03:13:17.2107616, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:16.0495636, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:37.6200679, HeatingEstimate = 01:06:22.3923249, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:59.7636736, WeightEstimate = 03:13:17.2107616 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:53. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.657881435748797;StartedAtUtc;00:03:37.6200679;09:11:18.9190992;09:07:41.2990313;False;408;0;0;00:00:00;03:13:17.2107616;03:13:17.2107616;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:16.0495636;00:00:00;02:05:42.8571428;00:03:37.6200679;01:06:22.3923249;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:59.7636736 [PrintingService.cs@1918] 08/08/2026 15:21:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=56,printChamber1=56,printChamber2=56,printChamber3=56,printChamber4=56 [ControlledHeating.cs@169] 08/08/2026 15:21:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=44,powderChamber1=44,powderChamber2=44,powderChamber3=44,powderChamber4=44 [ControlledHeating.cs@169] 08/08/2026 15:21:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=60.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:21:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 60.652227783203124. Used = 60.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 225.1082438, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.6805560732632558, Elapsed = 00:03:45.1205926, TimeTotal = 09:11:18.9190552, Remaining = 09:07:33.7984626, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:17.2107616, WeightTotalEstimate = 03:13:17.2107616, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:16.0495636, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:45.1205926, HeatingEstimate = 01:06:14.8917562, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:14:59.7636736, WeightEstimate = 03:13:17.2107616 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:53. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6805560732632558;StartedAtUtc;00:03:45.1205926;09:11:18.9190552;09:07:33.7984626;False;408;0;0;00:00:00;03:13:17.2107616;03:13:17.2107616;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:16.0495636;00:00:00;02:05:42.8571428;00:03:45.1205926;01:06:14.8917562;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:14:59.7636736 [PrintingService.cs@1918] 08/08/2026 15:21:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=57,printChamber1=57,printChamber2=57,printChamber3=57,printChamber4=57 [ControlledHeating.cs@169] 08/08/2026 15:21:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=121596, estimate=33.379484983507616 for layer 27, Z=2.701 [PrintingService.cs@1524] 08/08/2026 15:21:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 16, island count 8 [PrintingService.cs@1569] 08/08/2026 15:21:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 28, start=0, count=408, Z=2.8009999 [PrintingService.cs@1518] 08/08/2026 15:21:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 653, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:21:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=45,powderChamber1=45,powderChamber2=45,powderChamber3=45,powderChamber4=45 [ControlledHeating.cs@169] 08/08/2026 15:21:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=61.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:21:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 61.652227783203124. Used = 61.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 232.6129422, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.7031682357703599, Elapsed = 00:03:52.6257933, TimeTotal = 09:11:22.5229961, Remaining = 09:07:29.8972028, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:20.8142002, WeightTotalEstimate = 03:13:20.8142002, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:19.6530022, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:03:52.6257933, HeatingEstimate = 01:06:07.3870578, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:03.3671122, WeightEstimate = 03:13:20.8142002 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:56. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7031682357703599;StartedAtUtc;00:03:52.6257933;09:11:22.5229961;09:07:29.8972028;False;408;0;0;00:00:00;03:13:20.8142002;03:13:20.8142002;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:19.6530022;00:00:00;02:05:42.8571428;00:03:52.6257933;01:06:07.3870578;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:03.3671122 [PrintingService.cs@1918] 08/08/2026 15:21:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=58,printChamber1=58,printChamber2=58,printChamber3=58,printChamber4=58 [ControlledHeating.cs@169] 08/08/2026 15:21:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=31.5 that are outside of set tolerance 10 for current step target 45 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:21:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=62.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:21:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 62.652227783203124. Used = 62.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 240.1195194, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.7258571922377508, Elapsed = 00:04:00.1318689, TimeTotal = 09:11:22.5224945, Remaining = 09:07:22.3906256, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:20.8142002, WeightTotalEstimate = 03:13:20.8142002, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:19.6530022, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:00.1318689, HeatingEstimate = 01:05:59.8804806, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:03.3671122, WeightEstimate = 03:13:20.8142002 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:28:56. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7258571922377508;StartedAtUtc;00:04:00.1318689;09:11:22.5224945;09:07:22.3906256;False;408;0;0;00:00:00;03:13:20.8142002;03:13:20.8142002;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:19.6530022;00:00:00;02:05:42.8571428;00:04:00.1318689;01:05:59.8804806;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:03.3671122 [PrintingService.cs@1918] 08/08/2026 15:21:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=59,printChamber1=59,printChamber2=59,printChamber3=59,printChamber4=59 [ControlledHeating.cs@169] 08/08/2026 15:21:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=100428, estimate=29.569467229262838 for layer 28, Z=2.8009999 [PrintingService.cs@1524] 08/08/2026 15:21:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 17, island count 8 [PrintingService.cs@1569] 08/08/2026 15:21:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 29, start=0, count=408, Z=2.901 [PrintingService.cs@1518] 08/08/2026 15:21:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 675, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:21:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0803559 ~ 6.03 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:21:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=63.652227783203124 [ControlledHeating.cs@169] 08/08/2026 15:21:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 63.652227783203124. Used = 63.652227783203124 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 247.6189189, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.7483965600634521, Elapsed = 00:04:07.6312670, TimeTotal = 09:11:28.2422788, Remaining = 09:07:20.6110118, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:26.5339859, WeightTotalEstimate = 03:13:26.5339859, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:25.3727879, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:07.6312670, HeatingEstimate = 01:05:52.3810811, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:09.0868979, WeightEstimate = 03:13:26.5339859 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:02. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7483965600634521;StartedAtUtc;00:04:07.6312670;09:11:28.2422788;09:07:20.6110118;False;408;0;0;00:00:00;03:13:26.5339859;03:13:26.5339859;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:25.3727879;00:00:00;02:05:42.8571428;00:04:07.6312670;01:05:52.3810811;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:09.0868979 [PrintingService.cs@1918] 08/08/2026 15:21:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=60,printChamber1=60,printChamber2=60,printChamber3=60,printChamber4=60 [ControlledHeating.cs@169] 08/08/2026 15:21:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=64.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:21:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 64.65222778320313. Used = 64.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 255.1190901, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.7710637045622363, Elapsed = 00:04:15.1314266, TimeTotal = 09:11:28.2422672, Remaining = 09:07:13.1108406, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:26.5339859, WeightTotalEstimate = 03:13:26.5339859, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:25.3727879, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:15.1314266, HeatingEstimate = 01:05:44.8809099, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:09.0868979, WeightEstimate = 03:13:26.5339859 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:02. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7710637045622363;StartedAtUtc;00:04:15.1314266;09:11:28.2422672;09:07:13.1108406;False;408;0;0;00:00:00;03:13:26.5339859;03:13:26.5339859;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:25.3727879;00:00:00;02:05:42.8571428;00:04:15.1314266;01:05:44.8809099;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:09.0868979 [PrintingService.cs@1918] 08/08/2026 15:21:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=61,printChamber1=61,printChamber2=61,printChamber3=61,printChamber4=61 [ControlledHeating.cs@169] 08/08/2026 15:21:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=128739, estimate=34.837556116234296 for layer 29, Z=2.901 [PrintingService.cs@1524] 08/08/2026 15:21:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 18, island count 8 [PrintingService.cs@1569] 08/08/2026 15:21:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 30, start=0, count=408, Z=3.001 [PrintingService.cs@1518] 08/08/2026 15:21:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 680, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:21:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=65.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:21:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 65.65222778320313. Used = 65.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:21:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 262.6237878, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.7937439794860649, Elapsed = 00:04:22.6361255, TimeTotal = 09:11:28.2667822, Remaining = 09:07:05.6306567, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:26.5584997, WeightTotalEstimate = 03:13:26.5584997, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:25.3973017, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:22.6361255, HeatingEstimate = 01:05:37.3762122, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:09.1114117, WeightEstimate = 03:13:26.5584997 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:02. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:21:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7937439794860649;StartedAtUtc;00:04:22.6361255;09:11:28.2667822;09:07:05.6306567;False;408;0;0;00:00:00;03:13:26.5584997;03:13:26.5584997;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:25.3973017;00:00:00;02:05:42.8571428;00:04:22.6361255;01:05:37.3762122;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:09.1114117 [PrintingService.cs@1918] 08/08/2026 15:21:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=62,printChamber1=62,printChamber2=62,printChamber3=62,printChamber4=62 [ControlledHeating.cs@169] 08/08/2026 15:22:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=66.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 66.65222778320313. Used = 66.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 270.1233577, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.8164093262244815, Elapsed = 00:04:30.1356959, TimeTotal = 09:11:28.2667827, Remaining = 09:06:58.1310868, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:26.5584997, WeightTotalEstimate = 03:13:26.5584997, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:25.3973017, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:30.1356959, HeatingEstimate = 01:05:29.8766423, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:09.1114117, WeightEstimate = 03:13:26.5584997 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:02. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8164093262244815;StartedAtUtc;00:04:30.1356959;09:11:28.2667827;09:06:58.1310868;False;408;0;0;00:00:00;03:13:26.5584997;03:13:26.5584997;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:25.3973017;00:00:00;02:05:42.8571428;00:04:30.1356959;01:05:29.8766423;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:09.1114117 [PrintingService.cs@1918] 08/08/2026 15:22:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=63,printChamber1=63,printChamber2=63,printChamber3=63,printChamber4=63 [ControlledHeating.cs@169] 08/08/2026 15:22:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=105340, estimate=30.830029315859743 for layer 30, Z=3.001 [PrintingService.cs@1524] 08/08/2026 15:22:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 19, island count 8 [PrintingService.cs@1569] 08/08/2026 15:22:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 31, start=0, count=408, Z=3.101 [PrintingService.cs@1518] 08/08/2026 15:22:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 695, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:22:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=67.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 67.65222778320313. Used = 67.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 277.6286061, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.8389795784176073, Elapsed = 00:04:37.6414954, TimeTotal = 09:11:32.7596502, Remaining = 09:06:55.1181548, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:31.0508161, WeightTotalEstimate = 03:13:31.0508161, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:29.8896181, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:37.6414954, HeatingEstimate = 01:05:22.3713939, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:13.6037281, WeightEstimate = 03:13:31.0508161 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:07. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8389795784176073;StartedAtUtc;00:04:37.6414954;09:11:32.7596502;09:06:55.1181548;False;408;0;0;00:00:00;03:13:31.0508161;03:13:31.0508161;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:29.8896181;00:00:00;02:05:42.8571428;00:04:37.6414954;01:05:22.3713939;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:13.6037281 [PrintingService.cs@1918] 08/08/2026 15:22:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=64,printChamber1=64,printChamber2=64,printChamber3=64,printChamber4=64 [ControlledHeating.cs@169] 08/08/2026 15:22:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 45 with temperature 25.5 [HeaterCheck.cs@111] 08/08/2026 15:22:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=68.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 68.65222778320313. Used = 68.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 285.1316704, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.8616519139802508, Elapsed = 00:04:45.1443955, TimeTotal = 09:11:32.7594860, Remaining = 09:06:47.6150905, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:31.0508161, WeightTotalEstimate = 03:13:31.0508161, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:29.8896181, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:45.1443955, HeatingEstimate = 01:05:14.8683296, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:13.6037281, WeightEstimate = 03:13:31.0508161 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:07. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8616519139802508;StartedAtUtc;00:04:45.1443955;09:11:32.7594860;09:06:47.6150905;False;408;0;0;00:00:00;03:13:31.0508161;03:13:31.0508161;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:29.8896181;00:00:00;02:05:42.8571428;00:04:45.1443955;01:05:14.8683296;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:13.6037281 [PrintingService.cs@1918] 08/08/2026 15:22:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=65,printChamber1=65,printChamber2=65,printChamber3=65,printChamber4=65 [ControlledHeating.cs@169] 08/08/2026 15:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135146, estimate=35.82216946057578 for layer 31, Z=3.101 [PrintingService.cs@1524] 08/08/2026 15:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 20, island count 8 [PrintingService.cs@1569] 08/08/2026 15:22:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 32, start=0, count=408, Z=3.201 [PrintingService.cs@1518] 08/08/2026 15:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 690, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:22:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=46,powderChamber1=46,powderChamber2=46,powderChamber3=46,powderChamber4=46 [ControlledHeating.cs@169] 08/08/2026 15:22:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=69.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 69.65222778320313. Used = 69.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 292.6355565, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.8842878516011936, Elapsed = 00:04:52.6479077, TimeTotal = 09:11:34.1906722, Remaining = 09:06:41.5427645, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:32.4823762, WeightTotalEstimate = 03:13:32.4823762, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:31.3211782, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:04:52.6479077, HeatingEstimate = 01:05:07.3644435, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:15.0352882, WeightEstimate = 03:13:32.4823762 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:08. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8842878516011936;StartedAtUtc;00:04:52.6479077;09:11:34.1906722;09:06:41.5427645;False;408;0;0;00:00:00;03:13:32.4823762;03:13:32.4823762;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:31.3211782;00:00:00;02:05:42.8571428;00:04:52.6479077;01:05:07.3644435;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:15.0352882 [PrintingService.cs@1918] 08/08/2026 15:22:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=66,printChamber1=66,printChamber2=66,printChamber3=66,printChamber4=66 [ControlledHeating.cs@169] 08/08/2026 15:22:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=35.25 that are outside of set tolerance 10 for current step target 46 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:22:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=70.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 70.65222778320313. Used = 70.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 300.1372916, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.906956611683937, Elapsed = 00:05:00.1499532, TimeTotal = 09:11:34.1909826, Remaining = 09:06:34.0410294, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:32.4823762, WeightTotalEstimate = 03:13:32.4823762, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:31.3211782, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:00.1499532, HeatingEstimate = 01:04:59.8627084, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:15.0352882, WeightEstimate = 03:13:32.4823762 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:08. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.906956611683937;StartedAtUtc;00:05:00.1499532;09:11:34.1909826;09:06:34.0410294;False;408;0;0;00:00:00;03:13:32.4823762;03:13:32.4823762;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:31.3211782;00:00:00;02:05:42.8571428;00:05:00.1499532;01:04:59.8627084;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:15.0352882 [PrintingService.cs@1918] 08/08/2026 15:22:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=67,printChamber1=67,printChamber2=67,printChamber3=67,printChamber4=67 [ControlledHeating.cs@169] 08/08/2026 15:22:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0676964 ~ 6.03 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=110230, estimate=31.810933642794254 for layer 32, Z=3.201 [PrintingService.cs@1524] 08/08/2026 15:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 21, island count 8 [PrintingService.cs@1569] 08/08/2026 15:22:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 33, start=0, count=408, Z=3.3009999 [PrintingService.cs@1518] 08/08/2026 15:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 700, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:22:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=71.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 71.65222778320313. Used = 71.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 307.6412218, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.9296083993187317, Elapsed = 00:05:07.6535688, TimeTotal = 09:11:34.9643985, Remaining = 09:06:27.3108297, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:33.2561067, WeightTotalEstimate = 03:13:33.2561067, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:32.0949087, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:07.6535688, HeatingEstimate = 01:04:52.3587782, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:15.8090187, WeightEstimate = 03:13:33.2561067 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:09. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9296083993187317;StartedAtUtc;00:05:07.6535688;09:11:34.9643985;09:06:27.3108297;False;408;0;0;00:00:00;03:13:33.2561067;03:13:33.2561067;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:32.0949087;00:00:00;02:05:42.8571428;00:05:07.6535688;01:04:52.3587782;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:15.8090187 [PrintingService.cs@1918] 08/08/2026 15:22:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=68,printChamber1=68,printChamber2=68,printChamber3=68,printChamber4=68 [ControlledHeating.cs@169] 08/08/2026 15:22:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=47,powderChamber1=47,powderChamber2=47,powderChamber3=47,powderChamber4=47 [ControlledHeating.cs@169] 08/08/2026 15:22:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=72.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 72.65222778320313. Used = 72.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 315.1434899, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.952278153327365, Elapsed = 00:05:15.1561185, TimeTotal = 09:11:34.9646801, Remaining = 09:06:19.8085616, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:33.2561067, WeightTotalEstimate = 03:13:33.2561067, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:32.0949087, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:15.1561185, HeatingEstimate = 01:04:44.8565101, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:15.8090187, WeightEstimate = 03:13:33.2561067 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:09. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.952278153327365;StartedAtUtc;00:05:15.1561185;09:11:34.9646801;09:06:19.8085616;False;408;0;0;00:00:00;03:13:33.2561067;03:13:33.2561067;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:32.0949087;00:00:00;02:05:42.8571428;00:05:15.1561185;01:04:44.8565101;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:15.8090187 [PrintingService.cs@1918] 08/08/2026 15:22:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=69,printChamber1=69,printChamber2=69,printChamber3=69,printChamber4=69 [ControlledHeating.cs@169] 08/08/2026 15:22:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=48,powderChamber1=48,powderChamber2=48,powderChamber3=48,powderChamber4=48 [ControlledHeating.cs@169] 08/08/2026 15:22:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=73.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:22:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 73.65222778320313. Used = 73.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:22:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 322.6434771, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.9749393653936256, Elapsed = 00:05:22.6558360, TimeTotal = 09:11:34.9644104, Remaining = 09:06:12.3085744, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:33.2561067, WeightTotalEstimate = 03:13:33.2561067, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:32.0949087, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:22.6558360, HeatingEstimate = 01:04:37.3565229, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:15.8090187, WeightEstimate = 03:13:33.2561067 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:09. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:22:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9749393653936256;StartedAtUtc;00:05:22.6558360;09:11:34.9644104;09:06:12.3085744;False;408;0;0;00:00:00;03:13:33.2561067;03:13:33.2561067;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:32.0949087;00:00:00;02:05:42.8571428;00:05:22.6558360;01:04:37.3565229;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:15.8090187 [PrintingService.cs@1918] 08/08/2026 15:22:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=70,printChamber1=70,printChamber2=70,printChamber3=70,printChamber4=70 [ControlledHeating.cs@169] 08/08/2026 15:22:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=140575, estimate=36.961204538225196 for layer 33, Z=3.3009999 [PrintingService.cs@1524] 08/08/2026 15:22:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 22, island count 8 [PrintingService.cs@1569] 08/08/2026 15:22:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 34, start=0, count=408, Z=3.401 [PrintingService.cs@1518] 08/08/2026 15:22:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 706, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:23:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=34 that are outside of set tolerance 10 for current step target 48 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:23:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=74.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 74.65222778320313. Used = 74.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 330.1439545, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 0.9973264385453207, Elapsed = 00:05:30.1562920, TimeTotal = 09:11:44.1351397, Remaining = 09:06:13.9788477, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:42.4268574, WeightTotalEstimate = 03:13:42.4268574, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:41.2656594, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:30.1562920, HeatingEstimate = 01:04:29.8560455, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:24.9797694, WeightEstimate = 03:13:42.4268574 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:18. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9973264385453207;StartedAtUtc;00:05:30.1562920;09:11:44.1351397;09:06:13.9788477;False;408;0;0;00:00:00;03:13:42.4268574;03:13:42.4268574;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:41.2656594;00:00:00;02:05:42.8571428;00:05:30.1562920;01:04:29.8560455;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:24.9797694 [PrintingService.cs@1918] 08/08/2026 15:23:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=71,printChamber1=71,printChamber2=71,printChamber3=71,printChamber4=71 [ControlledHeating.cs@169] 08/08/2026 15:23:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=75.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 75.65222778320313. Used = 75.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 337.6444678, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.0199837785897237, Elapsed = 00:05:37.6568085, TimeTotal = 09:11:44.1351429, Remaining = 09:06:06.4783344, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:42.4268574, WeightTotalEstimate = 03:13:42.4268574, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:41.2656594, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:37.6568085, HeatingEstimate = 01:04:22.3555322, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:24.9797694, WeightEstimate = 03:13:42.4268574 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:18. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0199837785897237;StartedAtUtc;00:05:37.6568085;09:11:44.1351429;09:06:06.4783344;False;408;0;0;00:00:00;03:13:42.4268574;03:13:42.4268574;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:41.2656594;00:00:00;02:05:42.8571428;00:05:37.6568085;01:04:22.3555322;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:24.9797694 [PrintingService.cs@1918] 08/08/2026 15:23:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=72,printChamber1=72,printChamber2=72,printChamber3=72,printChamber4=72 [ControlledHeating.cs@169] 08/08/2026 15:23:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=76.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 76.65222778320313. Used = 76.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 345.1481805, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.0426514460055458, Elapsed = 00:05:45.1607461, TimeTotal = 09:11:44.1353678, Remaining = 09:05:58.9746217, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:42.4268574, WeightTotalEstimate = 03:13:42.4268574, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:41.2656594, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:45.1607461, HeatingEstimate = 01:04:14.8518195, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:24.9797694, WeightEstimate = 03:13:42.4268574 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:18. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0426514460055458;StartedAtUtc;00:05:45.1607461;09:11:44.1353678;09:05:58.9746217;False;408;0;0;00:00:00;03:13:42.4268574;03:13:42.4268574;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:41.2656594;00:00:00;02:05:42.8571428;00:05:45.1607461;01:04:14.8518195;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:24.9797694 [PrintingService.cs@1918] 08/08/2026 15:23:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=73,printChamber1=73,printChamber2=73,printChamber3=73,printChamber4=73 [ControlledHeating.cs@169] 08/08/2026 15:23:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=113628, estimate=33.082621468303394 for layer 34, Z=3.401 [PrintingService.cs@1524] 08/08/2026 15:23:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 23, island count 8 [PrintingService.cs@1569] 08/08/2026 15:23:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 35, start=0, count=408, Z=3.501 [PrintingService.cs@1518] 08/08/2026 15:23:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 717, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:23:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=77.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 77.65222778320313. Used = 77.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 352.6478009, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.064911498477901, Elapsed = 00:05:52.6601420, TimeTotal = 09:11:56.3803287, Remaining = 09:06:03.7201867, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:54.6720428, WeightTotalEstimate = 03:13:54.6720428, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:53.5108448, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:05:52.6601420, HeatingEstimate = 01:04:07.3521991, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:37.2249548, WeightEstimate = 03:13:54.6720428 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:30. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.064911498477901;StartedAtUtc;00:05:52.6601420;09:11:56.3803287;09:06:03.7201867;False;408;0;0;00:00:00;03:13:54.6720428;03:13:54.6720428;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:53.5108448;00:00:00;02:05:42.8571428;00:05:52.6601420;01:04:07.3521991;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:37.2249548 [PrintingService.cs@1918] 08/08/2026 15:23:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=74,printChamber1=74,printChamber2=74,printChamber3=74,printChamber4=74 [ControlledHeating.cs@169] 08/08/2026 15:23:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=78.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 78.65222778320313. Used = 78.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 360.1480804, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.0875603078483387, Elapsed = 00:06:00.1606099, TimeTotal = 09:11:56.3805171, Remaining = 09:05:56.2199072, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:54.6720428, WeightTotalEstimate = 03:13:54.6720428, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:53.5108448, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:00.1606099, HeatingEstimate = 01:03:59.8519196, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:37.2249548, WeightEstimate = 03:13:54.6720428 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:30. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0875603078483387;StartedAtUtc;00:06:00.1606099;09:11:56.3805171;09:05:56.2199072;False;408;0;0;00:00:00;03:13:54.6720428;03:13:54.6720428;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:53.5108448;00:00:00;02:05:42.8571428;00:06:00.1606099;01:03:59.8519196;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:37.2249548 [PrintingService.cs@1918] 08/08/2026 15:23:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=75,printChamber1=75,printChamber2=75,printChamber3=75,printChamber4=75 [ControlledHeating.cs@169] 08/08/2026 15:23:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0863171 ~ 6.02 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:23:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=79.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 79.65222778320313. Used = 79.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 367.6482683, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.1102077247429236, Elapsed = 00:06:07.6606126, TimeTotal = 09:11:56.3803319, Remaining = 09:05:48.7197193, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:54.6720428, WeightTotalEstimate = 03:13:54.6720428, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:53.5108448, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:07.6606126, HeatingEstimate = 01:03:52.3517317, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:37.2249548, WeightEstimate = 03:13:54.6720428 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:30. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1102077247429236;StartedAtUtc;00:06:07.6606126;09:11:56.3803319;09:05:48.7197193;False;408;0;0;00:00:00;03:13:54.6720428;03:13:54.6720428;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:53.5108448;00:00:00;02:05:42.8571428;00:06:07.6606126;01:03:52.3517317;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:37.2249548 [PrintingService.cs@1918] 08/08/2026 15:23:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=76,printChamber1=76,printChamber2=76,printChamber3=76,printChamber4=76 [ControlledHeating.cs@169] 08/08/2026 15:23:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 48 with temperature 35 [HeaterCheck.cs@111] 08/08/2026 15:23:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=145819, estimate=38.03112595013768 for layer 35, Z=3.501 [PrintingService.cs@1524] 08/08/2026 15:23:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 24, island count 8 [PrintingService.cs@1569] 08/08/2026 15:23:44 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 36, start=0, count=408, Z=3.601 [PrintingService.cs@1518] 08/08/2026 15:23:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 730, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:23:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=80.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 80.65222778320313. Used = 80.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 375.1481071, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.1328169619962294, Elapsed = 00:06:15.1604492, TimeTotal = 09:11:57.4816220, Remaining = 09:05:42.3211728, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:55.7733351, WeightTotalEstimate = 03:13:55.7733351, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:54.6121371, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:15.1604492, HeatingEstimate = 01:03:44.8518929, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:38.3262471, WeightEstimate = 03:13:55.7733351 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1328169619962294;StartedAtUtc;00:06:15.1604492;09:11:57.4816220;09:05:42.3211728;False;408;0;0;00:00:00;03:13:55.7733351;03:13:55.7733351;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:54.6121371;00:00:00;02:05:42.8571428;00:06:15.1604492;01:03:44.8518929;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:38.3262471 [PrintingService.cs@1918] 08/08/2026 15:23:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=77,printChamber1=77,printChamber2=77,printChamber3=77,printChamber4=77 [ControlledHeating.cs@169] 08/08/2026 15:23:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=49,powderChamber1=49,powderChamber2=49,powderChamber3=49,powderChamber4=49 [ControlledHeating.cs@169] 08/08/2026 15:23:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=81.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:23:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 81.65222778320313. Used = 81.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:23:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 382.6521186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.1554757202974395, Elapsed = 00:06:22.6644593, TimeTotal = 09:11:57.4816206, Remaining = 09:05:34.8171613, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:13:55.7733351, WeightTotalEstimate = 03:13:55.7733351, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:55:54.6121371, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:22.6644593, HeatingEstimate = 01:03:37.3478814, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:38.3262471, WeightEstimate = 03:13:55.7733351 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:23:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1554757202974395;StartedAtUtc;00:06:22.6644593;09:11:57.4816206;09:05:34.8171613;False;408;0;0;00:00:00;03:13:55.7733351;03:13:55.7733351;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:55:54.6121371;00:00:00;02:05:42.8571428;00:06:22.6644593;01:03:37.3478814;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:38.3262471 [PrintingService.cs@1918] 08/08/2026 15:23:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=78,printChamber1=78,printChamber2=78,printChamber3=78,printChamber4=78 [ControlledHeating.cs@169] 08/08/2026 15:24:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=119453, estimate=35.55160910319606 for layer 36, Z=3.601 [PrintingService.cs@1524] 08/08/2026 15:24:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 25, island count 8 [PrintingService.cs@1569] 08/08/2026 15:24:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 37, start=0, count=408, Z=3.701 [PrintingService.cs@1518] 08/08/2026 15:24:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 755, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:24:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=38 that are outside of set tolerance 10 for current step target 49 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:24:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=82.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 82.65222778320313. Used = 82.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 390.1509059, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.1778680777630806, Elapsed = 00:06:30.1635690, TimeTotal = 09:12:04.5558281, Remaining = 09:05:34.3922591, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:02.8472202, WeightTotalEstimate = 03:14:02.8472202, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:01.6860222, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:30.1635690, HeatingEstimate = 01:03:29.8490941, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:45.4001322, WeightEstimate = 03:14:02.8472202 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:38. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1778680777630806;StartedAtUtc;00:06:30.1635690;09:12:04.5558281;09:05:34.3922591;False;408;0;0;00:00:00;03:14:02.8472202;03:14:02.8472202;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:01.6860222;00:00:00;02:05:42.8571428;00:06:30.1635690;01:03:29.8490941;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:45.4001322 [PrintingService.cs@1918] 08/08/2026 15:24:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=79,printChamber1=79,printChamber2=79,printChamber3=79,printChamber4=79 [ControlledHeating.cs@169] 08/08/2026 15:24:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=83.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 83.65222778320313. Used = 83.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 397.6514119, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.2005109811090826, Elapsed = 00:06:37.6639284, TimeTotal = 09:12:04.5556815, Remaining = 09:05:26.8917531, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:02.8472202, WeightTotalEstimate = 03:14:02.8472202, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:01.6860222, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:37.6639284, HeatingEstimate = 01:03:22.3485881, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:15:45.4001322, WeightEstimate = 03:14:02.8472202 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:38. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2005109811090826;StartedAtUtc;00:06:37.6639284;09:12:04.5556815;09:05:26.8917531;False;408;0;0;00:00:00;03:14:02.8472202;03:14:02.8472202;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:01.6860222;00:00:00;02:05:42.8571428;00:06:37.6639284;01:03:22.3485881;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:15:45.4001322 [PrintingService.cs@1918] 08/08/2026 15:24:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=80,printChamber1=80,printChamber2=80,printChamber3=80,printChamber4=80 [ControlledHeating.cs@169] 08/08/2026 15:24:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:24:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:24:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:24:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:24:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:24:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=148066, estimate=39.369241400362675 for layer 37, Z=3.701 [PrintingService.cs@1524] 08/08/2026 15:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 26, island count 8 [PrintingService.cs@1569] 08/08/2026 15:24:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 38, start=0, count=408, Z=3.8009999 [PrintingService.cs@1518] 08/08/2026 15:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 769, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:24:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=84.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 84.65222778320313. Used = 84.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 405.1540762, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.2224586165153908, Elapsed = 00:06:45.1664185, TimeTotal = 09:12:23.5692813, Remaining = 09:05:38.4028628, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:21.8609942, WeightTotalEstimate = 03:14:21.8609942, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:20.6997962, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:45.1664185, HeatingEstimate = 01:03:14.8459238, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:04.4139062, WeightEstimate = 03:14:21.8609942 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:57. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2224586165153908;StartedAtUtc;00:06:45.1664185;09:12:23.5692813;09:05:38.4028628;False;408;0;0;00:00:00;03:14:21.8609942;03:14:21.8609942;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:20.6997962;00:00:00;02:05:42.8571428;00:06:45.1664185;01:03:14.8459238;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:04.4139062 [PrintingService.cs@1918] 08/08/2026 15:24:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=81,printChamber1=81,printChamber2=81,printChamber3=81,printChamber4=81 [ControlledHeating.cs@169] 08/08/2026 15:24:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=85.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 85.65222778320313. Used = 85.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 412.6554208, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.245091506470546, Elapsed = 00:06:52.6677661, TimeTotal = 09:12:23.5692843, Remaining = 09:05:30.9015182, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:21.8609942, WeightTotalEstimate = 03:14:21.8609942, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:20.6997962, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:06:52.6677661, HeatingEstimate = 01:03:07.3445792, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:04.4139062, WeightEstimate = 03:14:21.8609942 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:57. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.245091506470546;StartedAtUtc;00:06:52.6677661;09:12:23.5692843;09:05:30.9015182;False;408;0;0;00:00:00;03:14:21.8609942;03:14:21.8609942;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:20.6997962;00:00:00;02:05:42.8571428;00:06:52.6677661;01:03:07.3445792;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:04.4139062 [PrintingService.cs@1918] 08/08/2026 15:24:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=82,printChamber1=82,printChamber2=82,printChamber3=82,printChamber4=82 [ControlledHeating.cs@169] 08/08/2026 15:24:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=86.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 86.65222778320313. Used = 86.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 420.1603725, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.2677361191406809, Elapsed = 00:07:00.1730026, TimeTotal = 09:12:23.5695691, Remaining = 09:05:23.3965665, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:21.8609942, WeightTotalEstimate = 03:14:21.8609942, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:20.6997962, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:00.1730026, HeatingEstimate = 01:02:59.8396275, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:04.4139062, WeightEstimate = 03:14:21.8609942 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:29:57. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2677361191406809;StartedAtUtc;00:07:00.1730026;09:12:23.5695691;09:05:23.3965665;False;408;0;0;00:00:00;03:14:21.8609942;03:14:21.8609942;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:20.6997962;00:00:00;02:05:42.8571428;00:07:00.1730026;01:02:59.8396275;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:04.4139062 [PrintingService.cs@1918] 08/08/2026 15:24:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=83,printChamber1=83,printChamber2=83,printChamber3=83,printChamber4=83 [ControlledHeating.cs@169] 08/08/2026 15:24:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1142546 ~ 6.02 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=121233, estimate=36.33689423293372 for layer 38, Z=3.8009999 [PrintingService.cs@1524] 08/08/2026 15:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 27, island count 8 [PrintingService.cs@1569] 08/08/2026 15:24:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 39, start=0, count=408, Z=3.901 [PrintingService.cs@1518] 08/08/2026 15:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 759, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:24:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=87.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 87.65222778320313. Used = 87.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 427.6641256, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.29001267051721, Elapsed = 00:07:07.6767155, TimeTotal = 09:12:32.9081283, Remaining = 09:05:25.2314128, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:31.1995936, WeightTotalEstimate = 03:14:31.1995936, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:30.0383956, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:07.6767155, HeatingEstimate = 01:02:52.3358744, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:13.7525056, WeightEstimate = 03:14:31.1995936 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:07. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.29001267051721;StartedAtUtc;00:07:07.6767155;09:12:32.9081283;09:05:25.2314128;False;408;0;0;00:00:00;03:14:31.1995936;03:14:31.1995936;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:30.0383956;00:00:00;02:05:42.8571428;00:07:07.6767155;01:02:52.3358744;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:13.7525056 [PrintingService.cs@1918] 08/08/2026 15:24:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=84,printChamber1=84,printChamber2=84,printChamber3=84,printChamber4=84 [ControlledHeating.cs@169] 08/08/2026 15:24:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=88.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 88.65222778320313. Used = 88.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 435.1631184, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.3126332967845464, Elapsed = 00:07:15.1761163, TimeTotal = 09:12:32.9085363, Remaining = 09:05:17.7324200, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:31.1995936, WeightTotalEstimate = 03:14:31.1995936, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:30.0383956, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:15.1761163, HeatingEstimate = 01:02:44.8368816, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:13.7525056, WeightEstimate = 03:14:31.1995936 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:07. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3126332967845464;StartedAtUtc;00:07:15.1761163;09:12:32.9085363;09:05:17.7324200;False;408;0;0;00:00:00;03:14:31.1995936;03:14:31.1995936;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:30.0383956;00:00:00;02:05:42.8571428;00:07:15.1761163;01:02:44.8368816;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:13.7525056 [PrintingService.cs@1918] 08/08/2026 15:24:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=85,printChamber1=85,printChamber2=85,printChamber3=85,printChamber4=85 [ControlledHeating.cs@169] 08/08/2026 15:24:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=89.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:24:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 89.65222778320313. Used = 89.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:24:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 442.669238, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.3352722491624087, Elapsed = 00:07:22.6815787, TimeTotal = 09:12:32.9078791, Remaining = 09:05:10.2263004, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:31.1995936, WeightTotalEstimate = 03:14:31.1995936, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:30.0383956, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:22.6815787, HeatingEstimate = 01:02:37.3307620, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:13.7525056, WeightEstimate = 03:14:31.1995936 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:07. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:24:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3352722491624087;StartedAtUtc;00:07:22.6815787;09:12:32.9078791;09:05:10.2263004;False;408;0;0;00:00:00;03:14:31.1995936;03:14:31.1995936;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:30.0383956;00:00:00;02:05:42.8571428;00:07:22.6815787;01:02:37.3307620;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:13.7525056 [PrintingService.cs@1918] 08/08/2026 15:24:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=86,printChamber1=86,printChamber2=86,printChamber3=86,printChamber4=86 [ControlledHeating.cs@169] 08/08/2026 15:24:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=150671, estimate=39.9805731263613 for layer 39, Z=3.901 [PrintingService.cs@1524] 08/08/2026 15:24:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 28, island count 8 [PrintingService.cs@1569] 08/08/2026 15:24:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 40, start=0, count=408, Z=4.001 [PrintingService.cs@1518] 08/08/2026 15:24:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 758, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:25:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=90.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 90.65222778320313. Used = 90.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 450.1712828, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.3573828656311726, Elapsed = 00:07:30.1843794, TimeTotal = 09:12:45.6153027, Remaining = 09:05:15.4309233, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:43.9062613, WeightTotalEstimate = 03:14:43.9062613, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:42.7450633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:30.1843794, HeatingEstimate = 01:02:29.8287172, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:26.4591733, WeightEstimate = 03:14:43.9062613 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:19. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3573828656311726;StartedAtUtc;00:07:30.1843794;09:12:45.6153027;09:05:15.4309233;False;408;0;0;00:00:00;03:14:43.9062613;03:14:43.9062613;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:42.7450633;00:00:00;02:05:42.8571428;00:07:30.1843794;01:02:29.8287172;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:26.4591733 [PrintingService.cs@1918] 08/08/2026 15:25:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=87,printChamber1=87,printChamber2=87,printChamber3=87,printChamber4=87 [ControlledHeating.cs@169] 08/08/2026 15:25:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 49 with temperature 36.5 [HeaterCheck.cs@111] 08/08/2026 15:25:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=91.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 91.65222778320313. Used = 91.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 457.6723795, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.379997699687672, Elapsed = 00:07:37.6847178, TimeTotal = 09:12:45.6145444, Remaining = 09:05:07.9298266, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:43.9062613, WeightTotalEstimate = 03:14:43.9062613, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:42.7450633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:37.6847178, HeatingEstimate = 01:02:22.3276205, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:26.4591733, WeightEstimate = 03:14:43.9062613 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:19. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.379997699687672;StartedAtUtc;00:07:37.6847178;09:12:45.6145444;09:05:07.9298266;False;408;0;0;00:00:00;03:14:43.9062613;03:14:43.9062613;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:42.7450633;00:00:00;02:05:42.8571428;00:07:37.6847178;01:02:22.3276205;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:26.4591733 [PrintingService.cs@1918] 08/08/2026 15:25:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=88,printChamber1=88,printChamber2=88,printChamber3=88,printChamber4=88 [ControlledHeating.cs@169] 08/08/2026 15:25:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122704, estimate=36.472698477071575 for layer 40, Z=4.001 [PrintingService.cs@1524] 08/08/2026 15:25:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 29, island count 8 [PrintingService.cs@1569] 08/08/2026 15:25:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 41, start=0, count=408, Z=4.101 [PrintingService.cs@1518] 08/08/2026 15:25:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 779, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:25:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=92.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 92.65222778320313. Used = 92.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 465.171696, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.4021176726453948, Elapsed = 00:07:45.1840350, TimeTotal = 09:12:57.2463949, Remaining = 09:05:12.0623599, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:55.5381111, WeightTotalEstimate = 03:14:55.5381111, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:54.3769131, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:45.1840350, HeatingEstimate = 01:02:14.8283040, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:38.0910231, WeightEstimate = 03:14:55.5381111 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4021176726453948;StartedAtUtc;00:07:45.1840350;09:12:57.2463949;09:05:12.0623599;False;408;0;0;00:00:00;03:14:55.5381111;03:14:55.5381111;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:54.3769131;00:00:00;02:05:42.8571428;00:07:45.1840350;01:02:14.8283040;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:38.0910231 [PrintingService.cs@1918] 08/08/2026 15:25:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=89,printChamber1=89,printChamber2=89,printChamber3=89,printChamber4=89 [ControlledHeating.cs@169] 08/08/2026 15:25:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=93.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 93.65222778320313. Used = 93.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 472.675417, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.4247348165033447, Elapsed = 00:07:52.6877809, TimeTotal = 09:12:57.2464198, Remaining = 09:05:04.5586389, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:55.5381111, WeightTotalEstimate = 03:14:55.5381111, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:54.3769131, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:07:52.6877809, HeatingEstimate = 01:02:07.3245830, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:38.0910231, WeightEstimate = 03:14:55.5381111 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4247348165033447;StartedAtUtc;00:07:52.6877809;09:12:57.2464198;09:05:04.5586389;False;408;0;0;00:00:00;03:14:55.5381111;03:14:55.5381111;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:54.3769131;00:00:00;02:05:42.8571428;00:07:52.6877809;01:02:07.3245830;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:38.0910231 [PrintingService.cs@1918] 08/08/2026 15:25:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=90,printChamber1=90,printChamber2=90,printChamber3=90,printChamber4=90 [ControlledHeating.cs@169] 08/08/2026 15:25:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=94.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 94.65222778320313. Used = 94.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 480.1756811, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.4473413753807114, Elapsed = 00:08:00.1880142, TimeTotal = 09:12:57.2463890, Remaining = 09:04:57.0583748, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:55.5381111, WeightTotalEstimate = 03:14:55.5381111, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:54.3769131, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:00.1880142, HeatingEstimate = 01:01:59.8243189, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:38.0910231, WeightEstimate = 03:14:55.5381111 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4473413753807114;StartedAtUtc;00:08:00.1880142;09:12:57.2463890;09:04:57.0583748;False;408;0;0;00:00:00;03:14:55.5381111;03:14:55.5381111;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:54.3769131;00:00:00;02:05:42.8571428;00:08:00.1880142;01:01:59.8243189;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:38.0910231 [PrintingService.cs@1918] 08/08/2026 15:25:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=91,printChamber1=91,printChamber2=91,printChamber3=91,printChamber4=91 [ControlledHeating.cs@169] 08/08/2026 15:25:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0802311 ~ 6.03 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:25:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=153163, estimate=40.67876585533572 for layer 41, Z=4.101 [PrintingService.cs@1524] 08/08/2026 15:25:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 30, island count 8 [PrintingService.cs@1569] 08/08/2026 15:25:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 42, start=0, count=408, Z=4.201 [PrintingService.cs@1518] 08/08/2026 15:25:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 787, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:25:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=95.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 95.65222778320313. Used = 95.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 487.6791239, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.47024911324016, Elapsed = 00:08:07.6916279, TimeTotal = 09:12:50.6799554, Remaining = 09:04:42.9883275, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:48.9715066, WeightTotalEstimate = 03:14:48.9715066, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:47.8103086, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:07.6916279, HeatingEstimate = 01:01:52.3208761, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:31.5244186, WeightEstimate = 03:14:48.9715066 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:24. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.47024911324016;StartedAtUtc;00:08:07.6916279;09:12:50.6799554;09:04:42.9883275;False;408;0;0;00:00:00;03:14:48.9715066;03:14:48.9715066;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:47.8103086;00:00:00;02:05:42.8571428;00:08:07.6916279;01:01:52.3208761;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:31.5244186 [PrintingService.cs@1918] 08/08/2026 15:25:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=92,printChamber1=92,printChamber2=92,printChamber3=92,printChamber4=92 [ControlledHeating.cs@169] 08/08/2026 15:25:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=96.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 96.65222778320313. Used = 96.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 495.1791166, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.4928589193400947, Elapsed = 00:08:15.1914518, TimeTotal = 09:12:50.6797866, Remaining = 09:04:35.4883348, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:48.9715066, WeightTotalEstimate = 03:14:48.9715066, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:47.8103086, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:15.1914518, HeatingEstimate = 01:01:44.8208834, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:31.5244186, WeightEstimate = 03:14:48.9715066 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:24. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4928589193400947;StartedAtUtc;00:08:15.1914518;09:12:50.6797866;09:04:35.4883348;False;408;0;0;00:00:00;03:14:48.9715066;03:14:48.9715066;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:47.8103086;00:00:00;02:05:42.8571428;00:08:15.1914518;01:01:44.8208834;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:31.5244186 [PrintingService.cs@1918] 08/08/2026 15:25:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=93,printChamber1=93,printChamber2=93,printChamber3=93,printChamber4=93 [ControlledHeating.cs@169] 08/08/2026 15:25:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (54 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:25:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=97.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:25:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 97.65222778320313. Used = 97.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:25:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 502.6827118, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.5154802072848093, Elapsed = 00:08:22.6950874, TimeTotal = 09:12:50.6798270, Remaining = 09:04:27.9847396, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:48.9715066, WeightTotalEstimate = 03:14:48.9715066, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:47.8103086, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:22.6950874, HeatingEstimate = 01:01:37.3172882, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:31.5244186, WeightEstimate = 03:14:48.9715066 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:24. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:25:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5154802072848093;StartedAtUtc;00:08:22.6950874;09:12:50.6798270;09:04:27.9847396;False;408;0;0;00:00:00;03:14:48.9715066;03:14:48.9715066;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:47.8103086;00:00:00;02:05:42.8571428;00:08:22.6950874;01:01:37.3172882;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:31.5244186 [PrintingService.cs@1918] 08/08/2026 15:25:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=94,printChamber1=94,printChamber2=94,printChamber3=94,printChamber4=94 [ControlledHeating.cs@169] 08/08/2026 15:26:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=124103, estimate=37.4790787257951 for layer 42, Z=4.201 [PrintingService.cs@1524] 08/08/2026 15:26:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 31, island count 8 [PrintingService.cs@1569] 08/08/2026 15:26:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 43, start=0, count=408, Z=4.301 [PrintingService.cs@1518] 08/08/2026 15:26:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 816, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:26:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=98.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.65222778320313. Used = 98.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 510.1825838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.5378677640209601, Elapsed = 00:08:30.1949228, TimeTotal = 09:12:55.4741686, Remaining = 09:04:25.2792458, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:53.7658848, WeightTotalEstimate = 03:14:53.7658848, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:52.6046868, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:30.1949228, HeatingEstimate = 01:01:29.8174162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:36.3187968, WeightEstimate = 03:14:53.7658848 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:29. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5378677640209601;StartedAtUtc;00:08:30.1949228;09:12:55.4741686;09:04:25.2792458;False;408;0;0;00:00:00;03:14:53.7658848;03:14:53.7658848;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:52.6046868;00:00:00;02:05:42.8571428;00:08:30.1949228;01:01:29.8174162;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:36.3187968 [PrintingService.cs@1918] 08/08/2026 15:26:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=95,printChamber1=95,printChamber2=95,printChamber3=95,printChamber4=95 [ControlledHeating.cs@169] 08/08/2026 15:26:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 95 with temperature 91.75 [HeaterCheck.cs@67] 08/08/2026 15:26:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=99.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.65222778320313. Used = 99.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 517.6863728, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.5604868538662735, Elapsed = 00:08:37.6989163, TimeTotal = 09:12:55.4743731, Remaining = 09:04:17.7754568, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:53.7658848, WeightTotalEstimate = 03:14:53.7658848, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:52.6046868, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:37.6989163, HeatingEstimate = 01:01:22.3136272, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:36.3187968, WeightEstimate = 03:14:53.7658848 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:29. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5604868538662735;StartedAtUtc;00:08:37.6989163;09:12:55.4743731;09:04:17.7754568;False;408;0;0;00:00:00;03:14:53.7658848;03:14:53.7658848;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:52.6046868;00:00:00;02:05:42.8571428;00:08:37.6989163;01:01:22.3136272;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:36.3187968 [PrintingService.cs@1918] 08/08/2026 15:26:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=96,printChamber1=96,printChamber2=96,printChamber3=96,printChamber4=96 [ControlledHeating.cs@169] 08/08/2026 15:26:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 49 with temperature 37.25 [HeaterCheck.cs@111] 08/08/2026 15:26:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=50,powderChamber1=50,powderChamber2=50,powderChamber3=50,powderChamber4=50 [ControlledHeating.cs@169] 08/08/2026 15:26:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=100.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.65222778320313. Used = 100.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 525.1879364, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.5830980684222729, Elapsed = 00:08:45.2002910, TimeTotal = 09:12:55.4741842, Remaining = 09:04:10.2738932, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:14:53.7658848, WeightTotalEstimate = 03:14:53.7658848, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:56:52.6046868, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:45.2002910, HeatingEstimate = 01:01:14.8120636, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:36.3187968, WeightEstimate = 03:14:53.7658848 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:29. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5830980684222729;StartedAtUtc;00:08:45.2002910;09:12:55.4741842;09:04:10.2738932;False;408;0;0;00:00:00;03:14:53.7658848;03:14:53.7658848;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:56:52.6046868;00:00:00;02:05:42.8571428;00:08:45.2002910;01:01:14.8120636;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:36.3187968 [PrintingService.cs@1918] 08/08/2026 15:26:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=97,printChamber1=97,printChamber2=97,printChamber3=97,printChamber4=97 [ControlledHeating.cs@169] 08/08/2026 15:26:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=154885, estimate=41.23472549745034 for layer 43, Z=4.301 [PrintingService.cs@1524] 08/08/2026 15:26:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 8 [PrintingService.cs@1569] 08/08/2026 15:26:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 44, start=0, count=408, Z=4.401 [PrintingService.cs@1518] 08/08/2026 15:26:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 810, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:26:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=39 that are outside of set tolerance 10 for current step target 50 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:26:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=101.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.65222778320313. Used = 101.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 532.6877864, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.6050724746937595, Elapsed = 00:08:52.7001231, TimeTotal = 09:13:08.5401749, Remaining = 09:04:15.8400518, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:06.8318934, WeightTotalEstimate = 03:15:06.8318934, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:05.6706954, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:08:52.7001231, HeatingEstimate = 01:01:07.3122136, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:49.3848054, WeightEstimate = 03:15:06.8318934 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:42. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6050724746937595;StartedAtUtc;00:08:52.7001231;09:13:08.5401749;09:04:15.8400518;False;408;0;0;00:00:00;03:15:06.8318934;03:15:06.8318934;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:05.6706954;00:00:00;02:05:42.8571428;00:08:52.7001231;01:01:07.3122136;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:49.3848054 [PrintingService.cs@1918] 08/08/2026 15:26:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=98,printChamber1=98,printChamber2=98,printChamber3=98,printChamber4=98 [ControlledHeating.cs@169] 08/08/2026 15:26:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=51,powderChamber1=51,powderChamber2=51,powderChamber3=51,powderChamber4=51 [ControlledHeating.cs@169] 08/08/2026 15:26:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=102.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.65222778320313. Used = 102.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 540.187315, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.6276692223250118, Elapsed = 00:09:00.1996538, TimeTotal = 09:13:08.5401770, Remaining = 09:04:08.3405232, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:06.8318934, WeightTotalEstimate = 03:15:06.8318934, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:05.6706954, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:00.1996538, HeatingEstimate = 01:00:59.8126850, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:49.3848054, WeightEstimate = 03:15:06.8318934 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:42. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6276692223250118;StartedAtUtc;00:09:00.1996538;09:13:08.5401770;09:04:08.3405232;False;408;0;0;00:00:00;03:15:06.8318934;03:15:06.8318934;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:05.6706954;00:00:00;02:05:42.8571428;00:09:00.1996538;01:00:59.8126850;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:49.3848054 [PrintingService.cs@1918] 08/08/2026 15:26:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=99,printChamber1=99,printChamber2=99,printChamber3=99,printChamber4=99 [ControlledHeating.cs@169] 08/08/2026 15:26:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=40 that are outside of set tolerance 10 for current step target 51 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:26:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1232920 ~ 5.99 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=124741, estimate=37.23752644009061 for layer 44, Z=4.401 [PrintingService.cs@1524] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 8 [PrintingService.cs@1569] 08/08/2026 15:26:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 45, start=0, count=408, Z=4.501 [PrintingService.cs@1518] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 813, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=103.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.65222778320313. Used = 103.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 547.6880804, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.6500808263085407, Elapsed = 00:09:07.7004363, TimeTotal = 09:13:12.3398883, Remaining = 09:04:04.6394520, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:10.6315876, WeightTotalEstimate = 03:15:10.6315876, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:09.4703896, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:07.7004363, HeatingEstimate = 01:00:52.3119196, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:53.1844996, WeightEstimate = 03:15:10.6315876 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:46. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6500808263085407;StartedAtUtc;00:09:07.7004363;09:13:12.3398883;09:04:04.6394520;False;408;0;0;00:00:00;03:15:10.6315876;03:15:10.6315876;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:09.4703896;00:00:00;02:05:42.8571428;00:09:07.7004363;01:00:52.3119196;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:53.1844996 [PrintingService.cs@1918] 08/08/2026 15:26:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=100,printChamber1=100,printChamber2=100,printChamber3=100,printChamber4=100 [ControlledHeating.cs@169] 08/08/2026 15:26:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=104.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.65222778320313. Used = 104.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 555.1911864, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.6726857193281857, Elapsed = 00:09:15.2035290, TimeTotal = 09:13:12.3398750, Remaining = 09:03:57.1363460, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:10.6315876, WeightTotalEstimate = 03:15:10.6315876, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:09.4703896, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:15.2035290, HeatingEstimate = 01:00:44.8088136, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:53.1844996, WeightEstimate = 03:15:10.6315876 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:46. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6726857193281857;StartedAtUtc;00:09:15.2035290;09:13:12.3398750;09:03:57.1363460;False;408;0;0;00:00:00;03:15:10.6315876;03:15:10.6315876;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:09.4703896;00:00:00;02:05:42.8571428;00:09:15.2035290;01:00:44.8088136;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:53.1844996 [PrintingService.cs@1918] 08/08/2026 15:26:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=101,printChamber1=101,printChamber2=101,printChamber3=101,printChamber4=101 [ControlledHeating.cs@169] 08/08/2026 15:26:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 101 with temperature 98.75 [HeaterCheck.cs@67] 08/08/2026 15:26:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=105.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:26:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.65222778320313. Used = 105.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 562.691755, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.6952835888930022, Elapsed = 00:09:22.7042940, TimeTotal = 09:13:12.3400714, Remaining = 09:03:49.6357774, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:10.6315876, WeightTotalEstimate = 03:15:10.6315876, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:09.4703896, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:22.7042940, HeatingEstimate = 01:00:37.3082450, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:53.1844996, WeightEstimate = 03:15:10.6315876 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:46. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6952835888930022;StartedAtUtc;00:09:22.7042940;09:13:12.3400714;09:03:49.6357774;False;408;0;0;00:00:00;03:15:10.6315876;03:15:10.6315876;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:09.4703896;00:00:00;02:05:42.8571428;00:09:22.7042940;01:00:37.3082450;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:53.1844996 [PrintingService.cs@1918] 08/08/2026 15:26:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=102,printChamber1=102,printChamber2=102,printChamber3=102,printChamber4=102 [ControlledHeating.cs@169] 08/08/2026 15:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=155295, estimate=41.703121345690626 for layer 45, Z=4.501 [PrintingService.cs@1524] 08/08/2026 15:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 8 [PrintingService.cs@1569] 08/08/2026 15:27:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 46, start=0, count=408, Z=4.601 [PrintingService.cs@1518] 08/08/2026 15:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 814, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:27:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=106.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.65222778320313. Used = 106.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 570.1988567, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.7175972296485997, Elapsed = 00:09:30.2114998, TimeTotal = 09:13:18.2079359, Remaining = 09:03:47.9964361, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:16.4993480, WeightTotalEstimate = 03:15:16.4993480, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:15.3381500, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:30.2114998, HeatingEstimate = 01:00:29.8011433, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:59.0522600, WeightEstimate = 03:15:16.4993480 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:52. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7175972296485997;StartedAtUtc;00:09:30.2114998;09:13:18.2079359;09:03:47.9964361;False;408;0;0;00:00:00;03:15:16.4993480;03:15:16.4993480;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:15.3381500;00:00:00;02:05:42.8571428;00:09:30.2114998;01:00:29.8011433;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:59.0522600 [PrintingService.cs@1918] 08/08/2026 15:27:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=103,printChamber1=103,printChamber2=103,printChamber3=103,printChamber4=103 [ControlledHeating.cs@169] 08/08/2026 15:27:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=52,powderChamber1=52,powderChamber2=52,powderChamber3=52,powderChamber4=52 [ControlledHeating.cs@169] 08/08/2026 15:27:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=107.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.65222778320313. Used = 107.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 577.7024837, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.7402007960251031, Elapsed = 00:09:37.7154850, TimeTotal = 09:13:18.2082941, Remaining = 09:03:40.4928091, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:16.4993480, WeightTotalEstimate = 03:15:16.4993480, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:15.3381500, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:37.7154850, HeatingEstimate = 01:00:22.2975163, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:59.0522600, WeightEstimate = 03:15:16.4993480 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:52. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7402007960251031;StartedAtUtc;00:09:37.7154850;09:13:18.2082941;09:03:40.4928091;False;408;0;0;00:00:00;03:15:16.4993480;03:15:16.4993480;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:15.3381500;00:00:00;02:05:42.8571428;00:09:37.7154850;01:00:22.2975163;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:59.0522600 [PrintingService.cs@1918] 08/08/2026 15:27:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=104,printChamber1=104,printChamber2=104,printChamber3=104,printChamber4=104 [ControlledHeating.cs@169] 08/08/2026 15:27:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=53,powderChamber1=53,powderChamber2=53,powderChamber3=53,powderChamber4=53 [ControlledHeating.cs@169] 08/08/2026 15:27:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.5 [HeaterCheck.cs@67] 08/08/2026 15:27:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=108.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.65222778320313. Used = 108.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 585.2065947, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.7628028471005257, Elapsed = 00:09:45.2189496, TimeTotal = 09:13:18.2076477, Remaining = 09:03:32.9886981, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:16.4993480, WeightTotalEstimate = 03:15:16.4993480, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:15.3381500, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:45.2189496, HeatingEstimate = 01:00:14.7934053, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:16:59.0522600, WeightEstimate = 03:15:16.4993480 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:30:52. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7628028471005257;StartedAtUtc;00:09:45.2189496;09:13:18.2076477;09:03:32.9886981;False;408;0;0;00:00:00;03:15:16.4993480;03:15:16.4993480;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:15.3381500;00:00:00;02:05:42.8571428;00:09:45.2189496;01:00:14.7934053;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:16:59.0522600 [PrintingService.cs@1918] 08/08/2026 15:27:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=105,printChamber1=105,printChamber2=105,printChamber3=105,printChamber4=105 [ControlledHeating.cs@169] 08/08/2026 15:27:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49.5 [HeaterCheck.cs@67] 08/08/2026 15:27:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:27:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=39.75 that are outside of set tolerance 10 for current step target 53 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:27:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=125786, estimate=38.25821863130804 for layer 46, Z=4.601 [PrintingService.cs@1524] 08/08/2026 15:27:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 8 [PrintingService.cs@1569] 08/08/2026 15:27:25 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 47, start=0, count=408, Z=4.701 [PrintingService.cs@1518] 08/08/2026 15:27:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 822, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:27:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=109.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.65222778320313. Used = 109.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 592.7119674, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.7847938551429834, Elapsed = 00:09:52.7243227, TimeTotal = 09:13:29.6797057, Remaining = 09:03:36.9553830, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:27.9714056, WeightTotalEstimate = 03:15:27.9714056, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:26.8102076, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:09:52.7243227, HeatingEstimate = 01:00:07.2880326, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:10.5243176, WeightEstimate = 03:15:27.9714056 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:03. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7847938551429834;StartedAtUtc;00:09:52.7243227;09:13:29.6797057;09:03:36.9553830;False;408;0;0;00:00:00;03:15:27.9714056;03:15:27.9714056;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:26.8102076;00:00:00;02:05:42.8571428;00:09:52.7243227;01:00:07.2880326;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:10.5243176 [PrintingService.cs@1918] 08/08/2026 15:27:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=106,printChamber1=106,printChamber2=106,printChamber3=106,printChamber4=106 [ControlledHeating.cs@169] 08/08/2026 15:27:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 106 with temperature 101.25 [HeaterCheck.cs@67] 08/08/2026 15:27:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 106 with temperature 101.25 [HeaterCheck.cs@67] 08/08/2026 15:27:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.75 [HeaterCheck.cs@67] 08/08/2026 15:27:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.5 [HeaterCheck.cs@67] 08/08/2026 15:27:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.75 [HeaterCheck.cs@67] 08/08/2026 15:27:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=110.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.65222778320313. Used = 110.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 600.2124838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.8073792474074177, Elapsed = 00:10:00.2248595, TimeTotal = 09:13:29.6797261, Remaining = 09:03:29.4548666, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:27.9714056, WeightTotalEstimate = 03:15:27.9714056, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:26.8102076, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:00.2248595, HeatingEstimate = 00:59:59.7875162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:10.5243176, WeightEstimate = 03:15:27.9714056 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:03. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8073792474074177;StartedAtUtc;00:10:00.2248595;09:13:29.6797261;09:03:29.4548666;False;408;0;0;00:00:00;03:15:27.9714056;03:15:27.9714056;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:26.8102076;00:00:00;02:05:42.8571428;00:10:00.2248595;00:59:59.7875162;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:10.5243176 [PrintingService.cs@1918] 08/08/2026 15:27:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=107,printChamber1=107,printChamber2=107,printChamber3=107,printChamber4=107 [ControlledHeating.cs@169] 08/08/2026 15:27:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.5 [HeaterCheck.cs@67] 08/08/2026 15:27:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0243148 ~ 6.01 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.75 [HeaterCheck.cs@67] 08/08/2026 15:27:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=111.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.65222778320313. Used = 111.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 607.7120395, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.829961584229151, Elapsed = 00:10:07.7243806, TimeTotal = 09:13:29.6796915, Remaining = 09:03:21.9553109, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:27.9714056, WeightTotalEstimate = 03:15:27.9714056, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:26.8102076, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:07.7243806, HeatingEstimate = 00:59:52.2879605, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:10.5243176, WeightEstimate = 03:15:27.9714056 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:03. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.829961584229151;StartedAtUtc;00:10:07.7243806;09:13:29.6796915;09:03:21.9553109;False;408;0;0;00:00:00;03:15:27.9714056;03:15:27.9714056;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:26.8102076;00:00:00;02:05:42.8571428;00:10:07.7243806;00:59:52.2879605;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:10.5243176 [PrintingService.cs@1918] 08/08/2026 15:27:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=108,printChamber1=108,printChamber2=108,printChamber3=108,printChamber4=108 [ControlledHeating.cs@169] 08/08/2026 15:27:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.75 [HeaterCheck.cs@67] 08/08/2026 15:27:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=112.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.65222778320313. Used = 112.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 615.2111054, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.8525427725014727, Elapsed = 00:10:15.2235223, TimeTotal = 09:13:29.6797673, Remaining = 09:03:14.4562450, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:27.9714056, WeightTotalEstimate = 03:15:27.9714056, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:26.8102076, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:15.2235223, HeatingEstimate = 00:59:44.7888946, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:10.5243176, WeightEstimate = 03:15:27.9714056 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:03. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8525427725014727;StartedAtUtc;00:10:15.2235223;09:13:29.6797673;09:03:14.4562450;False;408;0;0;00:00:00;03:15:27.9714056;03:15:27.9714056;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:26.8102076;00:00:00;02:05:42.8571428;00:10:15.2235223;00:59:44.7888946;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:10.5243176 [PrintingService.cs@1918] 08/08/2026 15:27:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=109,printChamber1=109,printChamber2=109,printChamber3=109,printChamber4=109 [ControlledHeating.cs@169] 08/08/2026 15:27:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=157575, estimate=42.17117663535597 for layer 47, Z=4.701 [PrintingService.cs@1524] 08/08/2026 15:27:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 8 [PrintingService.cs@1569] 08/08/2026 15:27:53 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 48, start=0, count=408, Z=4.801 [PrintingService.cs@1518] 08/08/2026 15:27:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 822, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:27:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=113.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:27:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.65222778320313. Used = 113.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:27:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 622.7185267, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.8742566472847757, Elapsed = 00:10:22.7308662, TimeTotal = 09:13:45.4852665, Remaining = 09:03:22.7544003, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:43.7769822, WeightTotalEstimate = 03:15:43.7769822, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:42.6157842, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:22.7308662, HeatingEstimate = 00:59:37.2814733, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:26.3298942, WeightEstimate = 03:15:43.7769822 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:19. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:27:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8742566472847757;StartedAtUtc;00:10:22.7308662;09:13:45.4852665;09:03:22.7544003;False;408;0;0;00:00:00;03:15:43.7769822;03:15:43.7769822;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:42.6157842;00:00:00;02:05:42.8571428;00:10:22.7308662;00:59:37.2814733;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:26.3298942 [PrintingService.cs@1918] 08/08/2026 15:27:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=110,printChamber1=110,printChamber2=110,printChamber3=110,printChamber4=110 [ControlledHeating.cs@169] 08/08/2026 15:28:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:28:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=114.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.65222778320313. Used = 114.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 630.2208892, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.896836800389896, Elapsed = 00:10:30.2332317, TimeTotal = 09:13:45.4852695, Remaining = 09:03:15.2520378, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:43.7769822, WeightTotalEstimate = 03:15:43.7769822, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:42.6157842, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:30.2332317, HeatingEstimate = 00:59:29.7791108, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:26.3298942, WeightEstimate = 03:15:43.7769822 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:19. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.896836800389896;StartedAtUtc;00:10:30.2332317;09:13:45.4852695;09:03:15.2520378;False;408;0;0;00:00:00;03:15:43.7769822;03:15:43.7769822;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:42.6157842;00:00:00;02:05:42.8571428;00:10:30.2332317;00:59:29.7791108;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:26.3298942 [PrintingService.cs@1918] 08/08/2026 15:28:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=111,printChamber1=111,printChamber2=111,printChamber3=111,printChamber4=111 [ControlledHeating.cs@169] 08/08/2026 15:28:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.5 [HeaterCheck.cs@67] 08/08/2026 15:28:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.75 [HeaterCheck.cs@67] 08/08/2026 15:28:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 53 with temperature 40.75 [HeaterCheck.cs@111] 08/08/2026 15:28:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.5 [HeaterCheck.cs@67] 08/08/2026 15:28:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.5 [HeaterCheck.cs@67] 08/08/2026 15:28:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=115.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.65222778320313. Used = 115.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 637.7236238, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.9194180651488744, Elapsed = 00:10:37.7359665, TimeTotal = 09:13:45.4852697, Remaining = 09:03:07.7493032, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:43.7769822, WeightTotalEstimate = 03:15:43.7769822, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:42.6157842, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:37.7359665, HeatingEstimate = 00:59:22.2763762, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:26.3298942, WeightEstimate = 03:15:43.7769822 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:19. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9194180651488744;StartedAtUtc;00:10:37.7359665;09:13:45.4852697;09:03:07.7493032;False;408;0;0;00:00:00;03:15:43.7769822;03:15:43.7769822;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:42.6157842;00:00:00;02:05:42.8571428;00:10:37.7359665;00:59:22.2763762;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:26.3298942 [PrintingService.cs@1918] 08/08/2026 15:28:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=112,printChamber1=112,printChamber2=112,printChamber3=112,printChamber4=112 [ControlledHeating.cs@169] 08/08/2026 15:28:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.25 [HeaterCheck.cs@67] 08/08/2026 15:28:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=128235, estimate=38.28799850425155 for layer 48, Z=4.801 [PrintingService.cs@1524] 08/08/2026 15:28:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 8 [PrintingService.cs@1569] 08/08/2026 15:28:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 49, start=0, count=408, Z=4.901 [PrintingService.cs@1518] 08/08/2026 15:28:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 829, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:28:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:28:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=116.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.65222778320313. Used = 116.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 645.2240936, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.9413140676679472, Elapsed = 00:10:45.2364302, TimeTotal = 09:13:57.0965083, Remaining = 09:03:11.8600781, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:55.3882269, WeightTotalEstimate = 03:15:55.3882269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:54.2270289, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:45.2364302, HeatingEstimate = 00:59:14.7759064, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:37.9411389, WeightEstimate = 03:15:55.3882269 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9413140676679472;StartedAtUtc;00:10:45.2364302;09:13:57.0965083;09:03:11.8600781;False;408;0;0;00:00:00;03:15:55.3882269;03:15:55.3882269;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:54.2270289;00:00:00;02:05:42.8571428;00:10:45.2364302;00:59:14.7759064;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:37.9411389 [PrintingService.cs@1918] 08/08/2026 15:28:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=113,printChamber1=113,printChamber2=113,printChamber3=113,printChamber4=113 [ControlledHeating.cs@169] 08/08/2026 15:28:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49.25 [HeaterCheck.cs@67] 08/08/2026 15:28:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=117.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.65222778320313. Used = 117.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 652.7235146, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.9638822548848887, Elapsed = 00:10:52.7374722, TimeTotal = 09:13:57.0981293, Remaining = 09:03:04.3606571, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:55.3882269, WeightTotalEstimate = 03:15:55.3882269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:54.2270289, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:10:52.7374722, HeatingEstimate = 00:59:07.2764854, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:37.9411389, WeightEstimate = 03:15:55.3882269 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9638822548848887;StartedAtUtc;00:10:52.7374722;09:13:57.0981293;09:03:04.3606571;False;408;0;0;00:00:00;03:15:55.3882269;03:15:55.3882269;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:54.2270289;00:00:00;02:05:42.8571428;00:10:52.7374722;00:59:07.2764854;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:37.9411389 [PrintingService.cs@1918] 08/08/2026 15:28:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=114,printChamber1=114,printChamber2=114,printChamber3=114,printChamber4=114 [ControlledHeating.cs@169] 08/08/2026 15:28:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=118.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.65222778320313. Used = 118.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 660.2279403, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 1.9864559238034367, Elapsed = 00:11:00.2402724, TimeTotal = 09:13:57.0965038, Remaining = 09:02:56.8562314, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:15:55.3882269, WeightTotalEstimate = 03:15:55.3882269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:54.2270289, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:00.2402724, HeatingEstimate = 00:58:59.7720597, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:37.9411389, WeightEstimate = 03:15:55.3882269 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:31. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9864559238034367;StartedAtUtc;00:11:00.2402724;09:13:57.0965038;09:02:56.8562314;False;408;0;0;00:00:00;03:15:55.3882269;03:15:55.3882269;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:54.2270289;00:00:00;02:05:42.8571428;00:11:00.2402724;00:58:59.7720597;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:37.9411389 [PrintingService.cs@1918] 08/08/2026 15:28:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=115,printChamber1=115,printChamber2=115,printChamber3=115,printChamber4=115 [ControlledHeating.cs@169] 08/08/2026 15:28:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 48.75 [HeaterCheck.cs@67] 08/08/2026 15:28:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=160720, estimate=42.65494172843345 for layer 49, Z=4.901 [PrintingService.cs@1524] 08/08/2026 15:28:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 8 [PrintingService.cs@1569] 08/08/2026 15:28:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 50, start=0, count=408, Z=5.001 [PrintingService.cs@1518] 08/08/2026 15:28:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 839, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:28:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0391166 ~ 6.01 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:28:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=119.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.65222778320313. Used = 119.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 667.7281267, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.0086932700699167, Elapsed = 00:11:07.7406309, TimeTotal = 09:14:02.5383631, Remaining = 09:02:54.7977322, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:00.8299141, WeightTotalEstimate = 03:16:00.8299141, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:59.6687161, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:07.7406309, HeatingEstimate = 00:58:52.2718733, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:43.3828261, WeightEstimate = 03:16:00.8299141 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:36. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0086932700699167;StartedAtUtc;00:11:07.7406309;09:14:02.5383631;09:02:54.7977322;False;408;0;0;00:00:00;03:16:00.8299141;03:16:00.8299141;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:59.6687161;00:00:00;02:05:42.8571428;00:11:07.7406309;00:58:52.2718733;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:43.3828261 [PrintingService.cs@1918] 08/08/2026 15:28:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=116,printChamber1=116,printChamber2=116,printChamber3=116,printChamber4=116 [ControlledHeating.cs@169] 08/08/2026 15:28:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=120.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.65222778320313. Used = 120.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 675.2333803, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.0312707129907412, Elapsed = 00:11:15.2459473, TimeTotal = 09:14:02.5384259, Remaining = 09:02:47.2924786, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:00.8299141, WeightTotalEstimate = 03:16:00.8299141, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:57:59.6687161, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:15.2459473, HeatingEstimate = 00:58:44.7666197, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:43.3828261, WeightEstimate = 03:16:00.8299141 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:36. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0312707129907412;StartedAtUtc;00:11:15.2459473;09:14:02.5384259;09:02:47.2924786;False;408;0;0;00:00:00;03:16:00.8299141;03:16:00.8299141;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:57:59.6687161;00:00:00;02:05:42.8571428;00:11:15.2459473;00:58:44.7666197;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:43.3828261 [PrintingService.cs@1918] 08/08/2026 15:28:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=117,printChamber1=117,printChamber2=117,printChamber3=117,printChamber4=117 [ControlledHeating.cs@169] 08/08/2026 15:28:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=129805, estimate=39.1203375544747 for layer 50, Z=5.001 [PrintingService.cs@1524] 08/08/2026 15:28:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 8 [PrintingService.cs@1569] 08/08/2026 15:28:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 51, start=0, count=408, Z=5.101 [PrintingService.cs@1518] 08/08/2026 15:28:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 857, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:28:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=121.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:28:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.65222778320313. Used = 121.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:28:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 682.7386511, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.053225848220185, Elapsed = 00:11:22.7514972, TimeTotal = 09:14:12.6252673, Remaining = 09:02:49.8737701, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:10.9164764, WeightTotalEstimate = 03:16:10.9164764, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:09.7552784, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:22.7514972, HeatingEstimate = 00:58:37.2613489, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:53.4693884, WeightEstimate = 03:16:10.9164764 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:46. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:28:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.053225848220185;StartedAtUtc;00:11:22.7514972;09:14:12.6252673;09:02:49.8737701;False;408;0;0;00:00:00;03:16:10.9164764;03:16:10.9164764;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:09.7552784;00:00:00;02:05:42.8571428;00:11:22.7514972;00:58:37.2613489;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:53.4693884 [PrintingService.cs@1918] 08/08/2026 15:28:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=118,printChamber1=118,printChamber2=118,printChamber3=118,printChamber4=118 [ControlledHeating.cs@169] 08/08/2026 15:29:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=122.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.65222778320313. Used = 122.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 690.2427421, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.0757913046512075, Elapsed = 00:11:30.2550936, TimeTotal = 09:14:12.6247727, Remaining = 09:02:42.3696791, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:10.9164764, WeightTotalEstimate = 03:16:10.9164764, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:09.7552784, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:30.2550936, HeatingEstimate = 00:58:29.7572579, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:53.4693884, WeightEstimate = 03:16:10.9164764 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:46. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0757913046512075;StartedAtUtc;00:11:30.2550936;09:14:12.6247727;09:02:42.3696791;False;408;0;0;00:00:00;03:16:10.9164764;03:16:10.9164764;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:09.7552784;00:00:00;02:05:42.8571428;00:11:30.2550936;00:58:29.7572579;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:53.4693884 [PrintingService.cs@1918] 08/08/2026 15:29:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=119,printChamber1=119,printChamber2=119,printChamber3=119,printChamber4=119 [ControlledHeating.cs@169] 08/08/2026 15:29:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 119 with temperature 115 [HeaterCheck.cs@67] 08/08/2026 15:29:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 50.75 [HeaterCheck.cs@67] 08/08/2026 15:29:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 50 [HeaterCheck.cs@67] 08/08/2026 15:29:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=123.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.65222778320313. Used = 123.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 697.7444766, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.0983511289299384, Elapsed = 00:11:37.7568273, TimeTotal = 09:14:12.6247719, Remaining = 09:02:34.8679446, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:10.9164764, WeightTotalEstimate = 03:16:10.9164764, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:09.7552784, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:37.7568273, HeatingEstimate = 00:58:22.2555234, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:53.4693884, WeightEstimate = 03:16:10.9164764 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:46. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0983511289299384;StartedAtUtc;00:11:37.7568273;09:14:12.6247719;09:02:34.8679446;False;408;0;0;00:00:00;03:16:10.9164764;03:16:10.9164764;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:09.7552784;00:00:00;02:05:42.8571428;00:11:37.7568273;00:58:22.2555234;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:53.4693884 [PrintingService.cs@1918] 08/08/2026 15:29:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=120,printChamber1=120,printChamber2=120,printChamber3=120,printChamber4=120 [ControlledHeating.cs@169] 08/08/2026 15:29:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=163271, estimate=43.33975077595493 for layer 51, Z=5.101 [PrintingService.cs@1524] 08/08/2026 15:29:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 8 [PrintingService.cs@1569] 08/08/2026 15:29:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 52, start=0, count=408, Z=5.201 [PrintingService.cs@1518] 08/08/2026 15:29:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 839, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:29:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:29:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:29:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:29:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:29:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:29:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:29:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=124.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.65222778320313. Used = 124.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 705.2426201, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.121052342499246, Elapsed = 00:11:45.2549576, TimeTotal = 09:14:10.2382647, Remaining = 09:02:24.9833071, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:08.5299824, WeightTotalEstimate = 03:16:08.5299824, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:07.3687844, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:45.2549576, HeatingEstimate = 00:58:14.7573799, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:51.0828944, WeightEstimate = 03:16:08.5299824 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:44. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.121052342499246;StartedAtUtc;00:11:45.2549576;09:14:10.2382647;09:02:24.9833071;False;408;0;0;00:00:00;03:16:08.5299824;03:16:08.5299824;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:07.3687844;00:00:00;02:05:42.8571428;00:11:45.2549576;00:58:14.7573799;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:51.0828944 [PrintingService.cs@1918] 08/08/2026 15:29:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=121,printChamber1=121,printChamber2=121,printChamber3=121,printChamber4=121 [ControlledHeating.cs@169] 08/08/2026 15:29:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49.75 [HeaterCheck.cs@67] 08/08/2026 15:29:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=125.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.65222778320313. Used = 125.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 712.7464046, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.1436212009705558, Elapsed = 00:11:52.7591659, TimeTotal = 09:14:10.2386885, Remaining = 09:02:17.4795226, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:08.5299824, WeightTotalEstimate = 03:16:08.5299824, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:07.3687844, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:11:52.7591659, HeatingEstimate = 00:58:07.2535954, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:51.0828944, WeightEstimate = 03:16:08.5299824 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:44. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1436212009705558;StartedAtUtc;00:11:52.7591659;09:14:10.2386885;09:02:17.4795226;False;408;0;0;00:00:00;03:16:08.5299824;03:16:08.5299824;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:07.3687844;00:00:00;02:05:42.8571428;00:11:52.7591659;00:58:07.2535954;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:51.0828944 [PrintingService.cs@1918] 08/08/2026 15:29:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=122,printChamber1=122,printChamber2=122,printChamber3=122,printChamber4=122 [ControlledHeating.cs@169] 08/08/2026 15:29:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=131829, estimate=39.67848309114979 for layer 52, Z=5.201 [PrintingService.cs@1524] 08/08/2026 15:29:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 8 [PrintingService.cs@1569] 08/08/2026 15:29:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 53, start=0, count=408, Z=5.301 [PrintingService.cs@1518] 08/08/2026 15:29:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 826, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:29:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=54,powderChamber1=54,powderChamber2=54,powderChamber3=54,powderChamber4=54 [ControlledHeating.cs@169] 08/08/2026 15:29:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=126.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.65222778320313. Used = 126.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 720.2488107, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.1657051789300312, Elapsed = 00:12:00.2613685, TimeTotal = 09:14:17.5908996, Remaining = 09:02:17.3295311, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:15.8823970, WeightTotalEstimate = 03:16:15.8823970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:14.7211990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:00.2613685, HeatingEstimate = 00:57:59.7511893, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:58.4353090, WeightEstimate = 03:16:15.8823970 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:51. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1657051789300312;StartedAtUtc;00:12:00.2613685;09:14:17.5908996;09:02:17.3295311;False;408;0;0;00:00:00;03:16:15.8823970;03:16:15.8823970;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:14.7211990;00:00:00;02:05:42.8571428;00:12:00.2613685;00:57:59.7511893;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:58.4353090 [PrintingService.cs@1918] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=123,printChamber1=123,printChamber2=123,printChamber3=123,printChamber4=123 [ControlledHeating.cs@169] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 123 with temperature 116.25 [HeaterCheck.cs@88] 08/08/2026 15:29:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 123 with temperature 118.25 [HeaterCheck.cs@67] 08/08/2026 15:29:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49.25 [HeaterCheck.cs@67] 08/08/2026 15:29:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 50.75 [HeaterCheck.cs@67] 08/08/2026 15:29:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1387868 ~ 6.02 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:29:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=43 that are outside of set tolerance 10 for current step target 54 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:29:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=127.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.65222778320313. Used = 127.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 727.7509643, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.1882623641085335, Elapsed = 00:12:07.7633409, TimeTotal = 09:14:17.5907184, Remaining = 09:02:09.8273775, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:15.8823970, WeightTotalEstimate = 03:16:15.8823970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:14.7211990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:07.7633409, HeatingEstimate = 00:57:52.2490357, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:58.4353090, WeightEstimate = 03:16:15.8823970 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:51. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1882623641085335;StartedAtUtc;00:12:07.7633409;09:14:17.5907184;09:02:09.8273775;False;408;0;0;00:00:00;03:16:15.8823970;03:16:15.8823970;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:14.7211990;00:00:00;02:05:42.8571428;00:12:07.7633409;00:57:52.2490357;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:58.4353090 [PrintingService.cs@1918] 08/08/2026 15:29:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=124,printChamber1=124,printChamber2=124,printChamber3=124,printChamber4=124 [ControlledHeating.cs@169] 08/08/2026 15:29:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 124 with temperature 118 [HeaterCheck.cs@88] 08/08/2026 15:29:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 50.75 [HeaterCheck.cs@67] 08/08/2026 15:29:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 124 with temperature 120 [HeaterCheck.cs@67] 08/08/2026 15:29:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 124 with temperature 119 [HeaterCheck.cs@67] 08/08/2026 15:29:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 124 with temperature 119.5 [HeaterCheck.cs@67] 08/08/2026 15:29:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=128.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.65222778320313. Used = 128.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 735.250995, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.2108136447244533, Elapsed = 00:12:15.2633531, TimeTotal = 09:14:17.5906999, Remaining = 09:02:02.3273468, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:15.8823970, WeightTotalEstimate = 03:16:15.8823970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:14.7211990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:15.2633531, HeatingEstimate = 00:57:44.7490050, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:17:58.4353090, WeightEstimate = 03:16:15.8823970 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:51. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2108136447244533;StartedAtUtc;00:12:15.2633531;09:14:17.5906999;09:02:02.3273468;False;408;0;0;00:00:00;03:16:15.8823970;03:16:15.8823970;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:14.7211990;00:00:00;02:05:42.8571428;00:12:15.2633531;00:57:44.7490050;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:17:58.4353090 [PrintingService.cs@1918] 08/08/2026 15:29:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=125,printChamber1=125,printChamber2=125,printChamber3=125,printChamber4=125 [ControlledHeating.cs@169] 08/08/2026 15:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 50 [HeaterCheck.cs@67] 08/08/2026 15:29:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 125 with temperature 120 [HeaterCheck.cs@67] 08/08/2026 15:29:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49.75 [HeaterCheck.cs@67] 08/08/2026 15:29:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 125 with temperature 120.25 [HeaterCheck.cs@67] 08/08/2026 15:29:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 50.5 [HeaterCheck.cs@67] 08/08/2026 15:29:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=165657, estimate=43.69007721133899 for layer 53, Z=5.301 [PrintingService.cs@1524] 08/08/2026 15:29:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 8 [PrintingService.cs@1569] 08/08/2026 15:29:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 54, start=0, count=408, Z=5.401 [PrintingService.cs@1518] 08/08/2026 15:29:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 843, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:29:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 54 with temperature 42.25 [HeaterCheck.cs@111] 08/08/2026 15:29:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49.75 [HeaterCheck.cs@67] 08/08/2026 15:29:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=129.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:29:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.65222778320313. Used = 129.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:29:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 742.754709, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.2332172186699495, Elapsed = 00:12:22.7746398, TimeTotal = 09:14:20.2952185, Remaining = 09:01:57.5205787, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:18.5793429, WeightTotalEstimate = 03:16:18.5793429, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:17.4181449, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:22.7746398, HeatingEstimate = 00:57:37.2452910, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:01.1322549, WeightEstimate = 03:16:18.5793429 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:54. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:29:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2332172186699495;StartedAtUtc;00:12:22.7746398;09:14:20.2952185;09:01:57.5205787;False;408;0;0;00:00:00;03:16:18.5793429;03:16:18.5793429;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:17.4181449;00:00:00;02:05:42.8571428;00:12:22.7746398;00:57:37.2452910;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:01.1322549 [PrintingService.cs@1918] 08/08/2026 15:29:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=126,printChamber1=126,printChamber2=126,printChamber3=126,printChamber4=126 [ControlledHeating.cs@169] 08/08/2026 15:29:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:29:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49.25 [HeaterCheck.cs@67] 08/08/2026 15:29:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:30:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49 [HeaterCheck.cs@67] 08/08/2026 15:30:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 50 [HeaterCheck.cs@67] 08/08/2026 15:30:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49.75 [HeaterCheck.cs@67] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 50.25 [HeaterCheck.cs@67] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=130.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.65222778320313. Used = 130.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 750.2697326, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.255789498079939, Elapsed = 00:12:30.2820754, TimeTotal = 09:14:20.2876305, Remaining = 09:01:50.0055551, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:18.5793429, WeightTotalEstimate = 03:16:18.5793429, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:17.4181449, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:30.2820754, HeatingEstimate = 00:57:29.7302674, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:01.1322549, WeightEstimate = 03:16:18.5793429 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:54. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.255789498079939;StartedAtUtc;00:12:30.2820754;09:14:20.2876305;09:01:50.0055551;False;408;0;0;00:00:00;03:16:18.5793429;03:16:18.5793429;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:17.4181449;00:00:00;02:05:42.8571428;00:12:30.2820754;00:57:29.7302674;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:01.1322549 [PrintingService.cs@1918] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=127,printChamber1=127,printChamber2=127,printChamber3=127,printChamber4=127 [ControlledHeating.cs@169] 08/08/2026 15:30:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54 with temperature 49.25 [HeaterCheck.cs@67] 08/08/2026 15:30:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=55,powderChamber1=55,powderChamber2=55,powderChamber3=55,powderChamber4=55 [ControlledHeating.cs@169] 08/08/2026 15:30:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=131.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.65222778320313. Used = 131.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 757.7731478, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.278353348874304, Elapsed = 00:12:37.7869094, TimeTotal = 09:14:20.2890493, Remaining = 09:01:42.5021399, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:18.5793429, WeightTotalEstimate = 03:16:18.5793429, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:17.4181449, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:37.7869094, HeatingEstimate = 00:57:22.2268522, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:01.1322549, WeightEstimate = 03:16:18.5793429 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:54. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.278353348874304;StartedAtUtc;00:12:37.7869094;09:14:20.2890493;09:01:42.5021399;False;408;0;0;00:00:00;03:16:18.5793429;03:16:18.5793429;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:17.4181449;00:00:00;02:05:42.8571428;00:12:37.7869094;00:57:22.2268522;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:01.1322549 [PrintingService.cs@1918] 08/08/2026 15:30:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=128,printChamber1=128,printChamber2=128,printChamber3=128,printChamber4=128 [ControlledHeating.cs@169] 08/08/2026 15:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=133369, estimate=40.24924139274506 for layer 54, Z=5.401 [PrintingService.cs@1524] 08/08/2026 15:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 43, island count 8 [PrintingService.cs@1569] 08/08/2026 15:30:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 55, start=0, count=408, Z=5.501 [PrintingService.cs@1518] 08/08/2026 15:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 843, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:30:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=56,powderChamber1=56,powderChamber2=56,powderChamber3=56,powderChamber4=56 [ControlledHeating.cs@169] 08/08/2026 15:30:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 56 with temperature 51 [HeaterCheck.cs@67] 08/08/2026 15:30:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=132.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.65222778320313. Used = 132.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 765.2812789, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.300545566515045, Elapsed = 00:12:45.2936808, TimeTotal = 09:14:25.7475661, Remaining = 09:01:40.4538853, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:24.0392194, WeightTotalEstimate = 03:16:24.0392194, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:22.8780214, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:45.2936808, HeatingEstimate = 00:57:14.7187211, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:06.5921314, WeightEstimate = 03:16:24.0392194 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:59. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.300545566515045;StartedAtUtc;00:12:45.2936808;09:14:25.7475661;09:01:40.4538853;False;408;0;0;00:00:00;03:16:24.0392194;03:16:24.0392194;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:22.8780214;00:00:00;02:05:42.8571428;00:12:45.2936808;00:57:14.7187211;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:06.5921314 [PrintingService.cs@1918] 08/08/2026 15:30:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=129,printChamber1=129,printChamber2=129,printChamber3=129,printChamber4=129 [ControlledHeating.cs@169] 08/08/2026 15:30:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=42.75 that are outside of set tolerance 10 for current step target 56 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:30:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=133.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.65222778320313. Used = 133.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 772.7824637, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.3230947002754703, Elapsed = 00:12:52.7948176, TimeTotal = 09:14:25.7475181, Remaining = 09:01:32.9527005, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:24.0392194, WeightTotalEstimate = 03:16:24.0392194, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:22.8780214, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:12:52.7948176, HeatingEstimate = 00:57:07.2175363, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:06.5921314, WeightEstimate = 03:16:24.0392194 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:59. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3230947002754703;StartedAtUtc;00:12:52.7948176;09:14:25.7475181;09:01:32.9527005;False;408;0;0;00:00:00;03:16:24.0392194;03:16:24.0392194;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:22.8780214;00:00:00;02:05:42.8571428;00:12:52.7948176;00:57:07.2175363;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:06.5921314 [PrintingService.cs@1918] 08/08/2026 15:30:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=130,printChamber1=130,printChamber2=130,printChamber3=130,printChamber4=130 [ControlledHeating.cs@169] 08/08/2026 15:30:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 130 with temperature 124.5 [HeaterCheck.cs@88] 08/08/2026 15:30:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 130 with temperature 125.75 [HeaterCheck.cs@67] 08/08/2026 15:30:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 130 with temperature 125 [HeaterCheck.cs@67] 08/08/2026 15:30:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 130 with temperature 125 [HeaterCheck.cs@67] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=134.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.65222778320313. Used = 134.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 780.2901046, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.3456641555981905, Elapsed = 00:13:00.3027218, TimeTotal = 09:14:25.7477814, Remaining = 09:01:25.4450596, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:24.0392194, WeightTotalEstimate = 03:16:24.0392194, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:22.8780214, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:00.3027218, HeatingEstimate = 00:56:59.7098954, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:06.5921314, WeightEstimate = 03:16:24.0392194 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:31:59. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3456641555981905;StartedAtUtc;00:13:00.3027218;09:14:25.7477814;09:01:25.4450596;False;408;0;0;00:00:00;03:16:24.0392194;03:16:24.0392194;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:22.8780214;00:00:00;02:05:42.8571428;00:13:00.3027218;00:56:59.7098954;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:06.5921314 [PrintingService.cs@1918] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=131,printChamber1=131,printChamber2=131,printChamber3=131,printChamber4=131 [ControlledHeating.cs@169] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 131 with temperature 125.25 [HeaterCheck.cs@88] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=167542, estimate=44.20573777599547 for layer 55, Z=5.501 [PrintingService.cs@1524] 08/08/2026 15:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 44, island count 8 [PrintingService.cs@1569] 08/08/2026 15:30:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 56, start=0, count=408, Z=5.601 [PrintingService.cs@1518] 08/08/2026 15:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 834, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:30:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131 with temperature 126 [HeaterCheck.cs@67] 08/08/2026 15:30:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1577866 ~ 6.02 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:30:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131 with temperature 126 [HeaterCheck.cs@67] 08/08/2026 15:30:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=135.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.65222778320313. Used = 135.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 787.7984458, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.3675567500763046, Elapsed = 00:13:07.8109819, TimeTotal = 09:14:35.2734174, Remaining = 09:01:27.4624355, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:33.5649365, WeightTotalEstimate = 03:16:33.5649365, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:32.4037385, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:07.8109819, HeatingEstimate = 00:56:52.2015542, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:16.1178485, WeightEstimate = 03:16:33.5649365 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:09. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3675567500763046;StartedAtUtc;00:13:07.8109819;09:14:35.2734174;09:01:27.4624355;False;408;0;0;00:00:00;03:16:33.5649365;03:16:33.5649365;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:32.4037385;00:00:00;02:05:42.8571428;00:13:07.8109819;00:56:52.2015542;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:16.1178485 [PrintingService.cs@1918] 08/08/2026 15:30:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=132,printChamber1=132,printChamber2=132,printChamber3=132,printChamber4=132 [ControlledHeating.cs@169] 08/08/2026 15:30:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56 with temperature 51.5 [HeaterCheck.cs@67] 08/08/2026 15:30:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 132 with temperature 127 [HeaterCheck.cs@67] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=136.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.65222778320313. Used = 136.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56 with temperature 51.75 [HeaterCheck.cs@67] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 795.2998108, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.3900995484182364, Elapsed = 00:13:15.3121551, TimeTotal = 09:14:35.2732256, Remaining = 09:01:19.9610705, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:33.5649365, WeightTotalEstimate = 03:16:33.5649365, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:32.4037385, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:15.3121551, HeatingEstimate = 00:56:44.7001892, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:16.1178485, WeightEstimate = 03:16:33.5649365 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:09. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3900995484182364;StartedAtUtc;00:13:15.3121551;09:14:35.2732256;09:01:19.9610705;False;408;0;0;00:00:00;03:16:33.5649365;03:16:33.5649365;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:32.4037385;00:00:00;02:05:42.8571428;00:13:15.3121551;00:56:44.7001892;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:16.1178485 [PrintingService.cs@1918] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=133,printChamber1=133,printChamber2=133,printChamber3=133,printChamber4=133 [ControlledHeating.cs@169] 08/08/2026 15:30:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 133 with temperature 127.60713958740234 [HeaterCheck.cs@88] 08/08/2026 15:30:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 133 with temperature 128.14285278320312 [HeaterCheck.cs@67] 08/08/2026 15:30:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56 with temperature 51.5 [HeaterCheck.cs@67] 08/08/2026 15:30:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56 with temperature 51.5 [HeaterCheck.cs@67] 08/08/2026 15:30:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=137.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:30:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.65222778320313. Used = 137.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 802.8064631, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.412658761555051, Elapsed = 00:13:22.8187946, TimeTotal = 09:14:35.2732128, Remaining = 09:01:12.4544182, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:33.5649365, WeightTotalEstimate = 03:16:33.5649365, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:32.4037385, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:22.8187946, HeatingEstimate = 00:56:37.1935369, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:16.1178485, WeightEstimate = 03:16:33.5649365 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:09. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.412658761555051;StartedAtUtc;00:13:22.8187946;09:14:35.2732128;09:01:12.4544182;False;408;0;0;00:00:00;03:16:33.5649365;03:16:33.5649365;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:32.4037385;00:00:00;02:05:42.8571428;00:13:22.8187946;00:56:37.1935369;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:16.1178485 [PrintingService.cs@1918] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=134,printChamber1=134,printChamber2=134,printChamber3=134,printChamber4=134 [ControlledHeating.cs@169] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 134 with temperature 128.75 [HeaterCheck.cs@88] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=134204, estimate=40.49451117155743 for layer 56, Z=5.601 [PrintingService.cs@1524] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 45, island count 8 [PrintingService.cs@1569] 08/08/2026 15:30:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 57, start=0, count=408, Z=5.701 [PrintingService.cs@1518] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 858, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=57,powderChamber1=57,powderChamber2=57,powderChamber3=57,powderChamber4=57 [ControlledHeating.cs@169] 08/08/2026 15:30:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 57 with temperature 51.5 [HeaterCheck.cs@88] 08/08/2026 15:30:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 134 with temperature 130.75 [HeaterCheck.cs@67] 08/08/2026 15:30:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57 with temperature 52 [HeaterCheck.cs@67] 08/08/2026 15:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57 with temperature 52 [HeaterCheck.cs@67] 08/08/2026 15:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 134 with temperature 129 [HeaterCheck.cs@67] 08/08/2026 15:31:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57 with temperature 52 [HeaterCheck.cs@67] 08/08/2026 15:31:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 134 with temperature 130 [HeaterCheck.cs@67] 08/08/2026 15:31:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57 with temperature 52.75 [HeaterCheck.cs@67] 08/08/2026 15:31:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 134 with temperature 129.25 [HeaterCheck.cs@67] 08/08/2026 15:31:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=138.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.65222778320313. Used = 138.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 810.3131975, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.435268890116218, Elapsed = 00:13:30.3255414, TimeTotal = 09:14:34.5819030, Remaining = 09:01:04.2563616, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:32.8736143, WeightTotalEstimate = 03:16:32.8736143, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:31.7124163, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:30.3255414, HeatingEstimate = 00:56:29.6868025, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:15.4265263, WeightEstimate = 03:16:32.8736143 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:08. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.435268890116218;StartedAtUtc;00:13:30.3255414;09:14:34.5819030;09:01:04.2563616;False;408;0;0;00:00:00;03:16:32.8736143;03:16:32.8736143;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:31.7124163;00:00:00;02:05:42.8571428;00:13:30.3255414;00:56:29.6868025;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:15.4265263 [PrintingService.cs@1918] 08/08/2026 15:31:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=135,printChamber1=135,printChamber2=135,printChamber3=135,printChamber4=135 [ControlledHeating.cs@169] 08/08/2026 15:31:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=58,powderChamber1=58,powderChamber2=58,powderChamber3=58,powderChamber4=58 [ControlledHeating.cs@169] 08/08/2026 15:31:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=139.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.65222778320313. Used = 139.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 817.8199416, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.4578390442521316, Elapsed = 00:13:37.8357510, TimeTotal = 09:14:34.5853685, Remaining = 09:00:56.7496175, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:32.8736143, WeightTotalEstimate = 03:16:32.8736143, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:31.7124163, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:37.8357510, HeatingEstimate = 00:56:22.1800584, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:15.4265263, WeightEstimate = 03:16:32.8736143 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:08. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4578390442521316;StartedAtUtc;00:13:37.8357510;09:14:34.5853685;09:00:56.7496175;False;408;0;0;00:00:00;03:16:32.8736143;03:16:32.8736143;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:31.7124163;00:00:00;02:05:42.8571428;00:13:37.8357510;00:56:22.1800584;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:15.4265263 [PrintingService.cs@1918] 08/08/2026 15:31:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=136,printChamber1=136,printChamber2=136,printChamber3=136,printChamber4=136 [ControlledHeating.cs@169] 08/08/2026 15:31:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=43 that are outside of set tolerance 10 for current step target 58 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=168767, estimate=44.66065428898635 for layer 57, Z=5.701 [PrintingService.cs@1524] 08/08/2026 15:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 46, island count 8 [PrintingService.cs@1569] 08/08/2026 15:31:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 58, start=0, count=408, Z=5.801 [PrintingService.cs@1518] 08/08/2026 15:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 853, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:31:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=140.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.65222778320313. Used = 140.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 825.325663, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.480152595958289, Elapsed = 00:13:45.3380666, TimeTotal = 09:14:37.7131514, Remaining = 09:00:52.3750848, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:36.0048030, WeightTotalEstimate = 03:16:36.0048030, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:34.8436050, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:45.3380666, HeatingEstimate = 00:56:14.6743370, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:18.5577150, WeightEstimate = 03:16:36.0048030 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:11. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.480152595958289;StartedAtUtc;00:13:45.3380666;09:14:37.7131514;09:00:52.3750848;False;408;0;0;00:00:00;03:16:36.0048030;03:16:36.0048030;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:34.8436050;00:00:00;02:05:42.8571428;00:13:45.3380666;00:56:14.6743370;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:18.5577150 [PrintingService.cs@1918] 08/08/2026 15:31:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=137,printChamber1=137,printChamber2=137,printChamber3=137,printChamber4=137 [ControlledHeating.cs@169] 08/08/2026 15:31:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:31:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 137 with temperature 132 [HeaterCheck.cs@67] 08/08/2026 15:31:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 47.5 [HeaterCheck.cs@111] 08/08/2026 15:31:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=141.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.65222778320313. Used = 141.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 832.8272567, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.5026947942463287, Elapsed = 00:13:52.8395930, TimeTotal = 09:14:37.7130841, Remaining = 09:00:44.8734911, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:36.0048030, WeightTotalEstimate = 03:16:36.0048030, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:34.8436050, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:13:52.8395930, HeatingEstimate = 00:56:07.1727433, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:18.5577150, WeightEstimate = 03:16:36.0048030 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:11. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5026947942463287;StartedAtUtc;00:13:52.8395930;09:14:37.7130841;09:00:44.8734911;False;408;0;0;00:00:00;03:16:36.0048030;03:16:36.0048030;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:34.8436050;00:00:00;02:05:42.8571428;00:13:52.8395930;00:56:07.1727433;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:18.5577150 [PrintingService.cs@1918] 08/08/2026 15:31:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=138,printChamber1=138,printChamber2=138,printChamber3=138,printChamber4=138 [ControlledHeating.cs@169] 08/08/2026 15:31:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 138 with temperature 133.25 [HeaterCheck.cs@67] 08/08/2026 15:31:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138 with temperature 134 [HeaterCheck.cs@67] 08/08/2026 15:31:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.5 [HeaterCheck.cs@67] 08/08/2026 15:31:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 138 with temperature 133.2857208251953 [HeaterCheck.cs@67] 08/08/2026 15:31:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 138 with temperature 133.5 [HeaterCheck.cs@67] 08/08/2026 15:31:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 138 with temperature 133.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:31:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 138 with temperature 133.75 [HeaterCheck.cs@67] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=142.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.65222778320313. Used = 142.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138 with temperature 133 [HeaterCheck.cs@67] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 840.3292835, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.5252385129032358, Elapsed = 00:14:00.3416272, TimeTotal = 09:14:37.7130915, Remaining = 09:00:37.3714643, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:36.0048030, WeightTotalEstimate = 03:16:36.0048030, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:34.8436050, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:14:00.3416272, HeatingEstimate = 00:55:59.6707165, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:18.5577150, WeightEstimate = 03:16:36.0048030 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:11. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5252385129032358;StartedAtUtc;00:14:00.3416272;09:14:37.7130915;09:00:37.3714643;False;408;0;0;00:00:00;03:16:36.0048030;03:16:36.0048030;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:34.8436050;00:00:00;02:05:42.8571428;00:14:00.3416272;00:55:59.6707165;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:18.5577150 [PrintingService.cs@1918] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=139,printChamber1=139,printChamber2=139,printChamber3=139,printChamber4=139 [ControlledHeating.cs@169] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 139 with temperature 132.25 [HeaterCheck.cs@88] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 139 with temperature 133 [HeaterCheck.cs@88] 08/08/2026 15:31:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 139 with temperature 133.35714721679688 [HeaterCheck.cs@88] 08/08/2026 15:31:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139 with temperature 134 [HeaterCheck.cs@67] 08/08/2026 15:31:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 139 with temperature 134.0357208251953 [HeaterCheck.cs@67] 08/08/2026 15:31:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:31:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0170596 ~ 6.01 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:31:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135134, estimate=41.47759605278923 for layer 58, Z=5.801 [PrintingService.cs@1524] 08/08/2026 15:31:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 47, island count 8 [PrintingService.cs@1569] 08/08/2026 15:31:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 59, start=0, count=408, Z=5.901 [PrintingService.cs@1518] 08/08/2026 15:31:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 862, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:31:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=143.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.65222778320313. Used = 143.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54 [HeaterCheck.cs@67] 08/08/2026 15:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 847.8466291, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.547317086151902, Elapsed = 00:14:07.8589662, TimeTotal = 09:14:44.3904989, Remaining = 09:00:36.5315327, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:42.6822170, WeightTotalEstimate = 03:16:42.6822170, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:41.5210190, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:14:07.8589662, HeatingEstimate = 00:55:52.1533709, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:25.2351290, WeightEstimate = 03:16:42.6822170 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:18. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.547317086151902;StartedAtUtc;00:14:07.8589662;09:14:44.3904989;09:00:36.5315327;False;408;0;0;00:00:00;03:16:42.6822170;03:16:42.6822170;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:41.5210190;00:00:00;02:05:42.8571428;00:14:07.8589662;00:55:52.1533709;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:25.2351290 [PrintingService.cs@1918] 08/08/2026 15:31:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=140,printChamber1=140,printChamber2=140,printChamber3=140,printChamber4=140 [ControlledHeating.cs@169] 08/08/2026 15:31:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 140 with temperature 134.75 [HeaterCheck.cs@88] 08/08/2026 15:31:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:31:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 140 with temperature 135.25 [HeaterCheck.cs@67] 08/08/2026 15:31:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=144.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.65222778320313. Used = 144.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 855.3502934, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.569861254558721, Elapsed = 00:14:15.3626559, TimeTotal = 09:14:44.3905243, Remaining = 09:00:29.0278684, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:42.6822170, WeightTotalEstimate = 03:16:42.6822170, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:41.5210190, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:14:15.3626559, HeatingEstimate = 00:55:44.6497066, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:25.2351290, WeightEstimate = 03:16:42.6822170 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:18. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.569861254558721;StartedAtUtc;00:14:15.3626559;09:14:44.3905243;09:00:29.0278684;False;408;0;0;00:00:00;03:16:42.6822170;03:16:42.6822170;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:41.5210190;00:00:00;02:05:42.8571428;00:14:15.3626559;00:55:44.6497066;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:25.2351290 [PrintingService.cs@1918] 08/08/2026 15:31:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=141,printChamber1=141,printChamber2=141,printChamber3=141,printChamber4=141 [ControlledHeating.cs@169] 08/08/2026 15:31:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58 with temperature 44.5 [HeaterCheck.cs@111] 08/08/2026 15:31:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=145.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:31:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.65222778320313. Used = 145.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 862.85154, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.5923980470799566, Elapsed = 00:14:22.8638896, TimeTotal = 09:14:44.3905114, Remaining = 09:00:21.5266218, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:16:42.6822170, WeightTotalEstimate = 03:16:42.6822170, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:58:41.5210190, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:14:22.8638896, HeatingEstimate = 00:55:37.1484600, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:25.2351290, WeightEstimate = 03:16:42.6822170 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:18. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5923980470799566;StartedAtUtc;00:14:22.8638896;09:14:44.3905114;09:00:21.5266218;False;408;0;0;00:00:00;03:16:42.6822170;03:16:42.6822170;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:58:41.5210190;00:00:00;02:05:42.8571428;00:14:22.8638896;00:55:37.1484600;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:25.2351290 [PrintingService.cs@1918] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=142,printChamber1=142,printChamber2=142,printChamber3=142,printChamber4=142 [ControlledHeating.cs@169] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 142 with temperature 135.75 [HeaterCheck.cs@88] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=168981, estimate=44.66344265450924 for layer 59, Z=5.901 [PrintingService.cs@1524] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 48, island count 8 [PrintingService.cs@1569] 08/08/2026 15:31:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 60, start=0, count=408, Z=6.001 [PrintingService.cs@1518] 08/08/2026 15:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 855, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:32:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=146.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.65222778320313. Used = 146.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 870.3522882, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.6129770593297073, Elapsed = 00:14:30.3646352, TimeTotal = 09:15:09.3102403, Remaining = 09:00:38.9456051, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:07.6019485, WeightTotalEstimate = 03:17:07.6019485, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:06.4407505, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:14:30.3646352, HeatingEstimate = 00:55:29.6477118, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:50.1548605, WeightEstimate = 03:17:07.6019485 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:43. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:32:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.6129770593297073;StartedAtUtc;00:14:30.3646352;09:15:09.3102403;09:00:38.9456051;False;408;0;0;00:00:00;03:17:07.6019485;03:17:07.6019485;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:06.4407505;00:00:00;02:05:42.8571428;00:14:30.3646352;00:55:29.6477118;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:50.1548605 [PrintingService.cs@1918] 08/08/2026 15:32:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=143,printChamber1=143,printChamber2=143,printChamber3=143,printChamber4=143 [ControlledHeating.cs@169] 08/08/2026 15:32:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=147.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.65222778320313. Used = 147.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 877.8506933, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.635489259329421, Elapsed = 00:14:37.8633006, TimeTotal = 09:15:09.3105006, Remaining = 09:00:31.4472000, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:07.6019485, WeightTotalEstimate = 03:17:07.6019485, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:06.4407505, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:42.8571428, HeatingElapsed = 00:14:37.8633006, HeatingEstimate = 00:55:22.1493067, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:50.1548605, WeightEstimate = 03:17:07.6019485 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:43. coolingEstimate=02:05:42.8571428 [PrintingService.cs@1912] 08/08/2026 15:32:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.635489259329421;StartedAtUtc;00:14:37.8633006;09:15:09.3105006;09:00:31.4472000;False;408;0;0;00:00:00;03:17:07.6019485;03:17:07.6019485;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:06.4407505;00:00:00;02:05:42.8571428;00:14:37.8633006;00:55:22.1493067;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:50.1548605 [PrintingService.cs@1918] 08/08/2026 15:32:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=144,printChamber1=144,printChamber2=144,printChamber3=144,printChamber4=144 [ControlledHeating.cs@169] 08/08/2026 15:32:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.5 [HeaterCheck.cs@67] 08/08/2026 15:32:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 144 with temperature 139.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:32:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=132264, estimate=38.0378438139221 for layer 60, Z=6.001 [PrintingService.cs@1524] 08/08/2026 15:32:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 49, island count 8 [PrintingService.cs@1569] 08/08/2026 15:32:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 61, start=0, count=408, Z=6.101 [PrintingService.cs@1518] 08/08/2026 15:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 864, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:32:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=148.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.65222778320313. Used = 148.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=133.75,printChamber4=133.25 that are outside of set tolerance 10 for current step target 144 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:32:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 144 with temperature 139 [HeaterCheck.cs@67] 08/08/2026 15:32:22 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (347 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:32:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 144 with temperature 139 [HeaterCheck.cs@67] 08/08/2026 15:32:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 47 [HeaterCheck.cs@111] 08/08/2026 15:32:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=149.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.65222778320313. Used = 149.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 894.35202, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.6840581080994044, Elapsed = 00:14:54.3644311, TimeTotal = 09:15:21.3512927, Remaining = 09:00:26.9868616, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:17.7085177, WeightTotalEstimate = 03:17:17.7085177, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:16.5473197, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:44.7915619, HeatingElapsed = 00:14:54.3644311, HeatingEstimate = 00:55:05.6479800, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:19:00.2614297, WeightEstimate = 03:17:17.7085177 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:55. coolingEstimate=02:05:44.7915619 [PrintingService.cs@1912] 08/08/2026 15:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.6840581080994044;StartedAtUtc;00:14:54.3644311;09:15:21.3512927;09:00:26.9868616;False;408;0;0;00:00:00;03:17:17.7085177;03:17:17.7085177;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:16.5473197;00:00:00;02:05:44.7915619;00:14:54.3644311;00:55:05.6479800;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:19:00.2614297 [PrintingService.cs@1918] 08/08/2026 15:32:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=145,printChamber1=145,printChamber2=145,printChamber3=145,printChamber4=145 [ControlledHeating.cs@169] 08/08/2026 15:32:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 145 with temperature 140 [HeaterCheck.cs@67] 08/08/2026 15:32:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 145 with temperature 140.25 [HeaterCheck.cs@67] 08/08/2026 15:32:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=150.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 150.65222778320313. Used = 150.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=134.25 that are outside of set tolerance 10 for current step target 145 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:32:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 145 with temperature 140.5 [HeaterCheck.cs@67] 08/08/2026 15:32:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0589119 ~ 6.01 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:32:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=168402, estimate=44.52000234521534 for layer 61, Z=6.101 [PrintingService.cs@1524] 08/08/2026 15:32:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 50, island count 8 [PrintingService.cs@1569] 08/08/2026 15:32:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 62, start=0, count=408, Z=6.201 [PrintingService.cs@1518] 08/08/2026 15:32:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1401, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:32:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=151.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 151.65222778320313. Used = 151.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=152.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 152.65222778320313. Used = 152.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 145 with temperature 140.5 [HeaterCheck.cs@67] 08/08/2026 15:32:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 145 with temperature 140 [HeaterCheck.cs@67] 08/08/2026 15:32:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 145 with temperature 140 [HeaterCheck.cs@67] 08/08/2026 15:32:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58 with temperature 53.42856979370117 [HeaterCheck.cs@67] 08/08/2026 15:32:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 145 with temperature 140 [HeaterCheck.cs@67] 08/08/2026 15:32:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58 with temperature 53.21428680419922 [HeaterCheck.cs@67] 08/08/2026 15:32:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58 with temperature 53.21428680419922 [HeaterCheck.cs@67] 08/08/2026 15:32:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 145 with temperature 140.25 [HeaterCheck.cs@67] 08/08/2026 15:32:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58 with temperature 53.10714340209961 [HeaterCheck.cs@67] 08/08/2026 15:32:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=153.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:32:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 153.65222778320313. Used = 153.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:32:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:33:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 145 with temperature 140 [HeaterCheck.cs@67] 08/08/2026 15:33:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:33:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 145 with temperature 140 [HeaterCheck.cs@67] 08/08/2026 15:33:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135553, estimate=40.79547150401986 for layer 62, Z=6.201 [PrintingService.cs@1524] 08/08/2026 15:33:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 51, island count 8 [PrintingService.cs@1569] 08/08/2026 15:33:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 63, start=0, count=408, Z=6.301 [PrintingService.cs@1518] 08/08/2026 15:33:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1792, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:33:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=154.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 154.65222778320313. Used = 154.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=155.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 155.65222778320313. Used = 155.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:33:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=156.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 156.65222778320313. Used = 156.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 946.8749213, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.8422243881071485, Elapsed = 00:15:46.8872608, TimeTotal = 09:15:15.0072444, Remaining = 08:59:28.1199836, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:13.0092757, WeightTotalEstimate = 03:17:13.0092757, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:11.8480777, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:43.1468272, HeatingElapsed = 00:15:46.8872608, HeatingEstimate = 00:54:13.1250787, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:18:55.5621877, WeightEstimate = 03:17:13.0092757 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:32:49. coolingEstimate=02:05:43.1468272 [PrintingService.cs@1912] 08/08/2026 15:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8422243881071485;StartedAtUtc;00:15:46.8872608;09:15:15.0072444;08:59:28.1199836;False;408;0;0;00:00:00;03:17:13.0092757;03:17:13.0092757;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:11.8480777;00:00:00;02:05:43.1468272;00:15:46.8872608;00:54:13.1250787;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:18:55.5621877 [PrintingService.cs@1918] 08/08/2026 15:33:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=146,printChamber1=146,printChamber2=146,printChamber3=146,printChamber4=146 [ControlledHeating.cs@169] 08/08/2026 15:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=170652, estimate=59.71900771178687 for layer 63, Z=6.301 [PrintingService.cs@1524] 08/08/2026 15:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 52, island count 8 [PrintingService.cs@1569] 08/08/2026 15:33:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 64, start=0, count=408, Z=6.401 [PrintingService.cs@1518] 08/08/2026 15:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2109, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:33:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 46.5 [HeaterCheck.cs@111] 08/08/2026 15:33:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=157.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 157.65222778320313. Used = 157.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (461 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:33:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=135.32142639160156 that are outside of set tolerance 10 for current step target 146 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:33:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 955.3750018, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.8666777393400675, Elapsed = 00:15:55.3873390, TimeTotal = 09:15:27.3365851, Remaining = 08:59:31.9492461, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:22.1421224, WeightTotalEstimate = 03:17:22.1421224, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:20.9809244, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:46.3433235, HeatingElapsed = 00:15:55.3873390, HeatingEstimate = 00:54:04.6249982, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:19:04.6950344, WeightEstimate = 03:17:22.1421224 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:33:01. coolingEstimate=02:05:46.3433235 [PrintingService.cs@1912] 08/08/2026 15:33:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8666777393400675;StartedAtUtc;00:15:55.3873390;09:15:27.3365851;08:59:31.9492461;False;408;0;0;00:00:00;03:17:22.1421224;03:17:22.1421224;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:20.9809244;00:00:00;02:05:46.3433235;00:15:55.3873390;00:54:04.6249982;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:19:04.6950344 [PrintingService.cs@1918] 08/08/2026 15:33:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=147,printChamber1=147,printChamber2=147,printChamber3=147,printChamber4=147 [ControlledHeating.cs@169] 08/08/2026 15:33:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 147 with temperature 141.75 [HeaterCheck.cs@88] 08/08/2026 15:33:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 147 with temperature 142 [HeaterCheck.cs@67] 08/08/2026 15:33:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=158.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 158.65222778320313. Used = 158.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 147 with temperature 142.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:33:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 962.8782662, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.889191724740024, Elapsed = 00:16:02.8906521, TimeTotal = 09:15:27.3366338, Remaining = 08:59:24.4459817, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:22.1421224, WeightTotalEstimate = 03:17:22.1421224, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:20.9809244, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:46.3433235, HeatingElapsed = 00:16:02.8906521, HeatingEstimate = 00:53:57.1217338, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:19:04.6950344, WeightEstimate = 03:17:22.1421224 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:33:01. coolingEstimate=02:05:46.3433235 [PrintingService.cs@1912] 08/08/2026 15:33:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.889191724740024;StartedAtUtc;00:16:02.8906521;09:15:27.3366338;08:59:24.4459817;False;408;0;0;00:00:00;03:17:22.1421224;03:17:22.1421224;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:20.9809244;00:00:00;02:05:46.3433235;00:16:02.8906521;00:53:57.1217338;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:19:04.6950344 [PrintingService.cs@1918] 08/08/2026 15:33:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=148,printChamber1=148,printChamber2=148,printChamber3=148,printChamber4=148 [ControlledHeating.cs@169] 08/08/2026 15:33:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 148 with temperature 142.64285278320312 [HeaterCheck.cs@88] 08/08/2026 15:33:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 148 with temperature 143.0357208251953 [HeaterCheck.cs@67] 08/08/2026 15:33:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0548383 ~ 5.99 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:33:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 148 with temperature 143.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:33:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135260, estimate=39.670190890087156 for layer 64, Z=6.401 [PrintingService.cs@1524] 08/08/2026 15:33:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 53, island count 8 [PrintingService.cs@1569] 08/08/2026 15:33:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 65, start=0, count=408, Z=6.501 [PrintingService.cs@1518] 08/08/2026 15:33:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2419, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:33:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=159.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 159.65222778320313. Used = 159.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 970.3834096, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.9107698495413254, Elapsed = 00:16:10.3957482, TimeTotal = 09:15:38.1132264, Remaining = 08:59:27.7174782, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:30.1248186, WeightTotalEstimate = 03:17:30.1248186, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:28.9636206, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:49.1372672, HeatingElapsed = 00:16:10.3957482, HeatingEstimate = 00:53:49.6165904, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:19:12.6777306, WeightEstimate = 03:17:30.1248186 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:33:12. coolingEstimate=02:05:49.1372672 [PrintingService.cs@1912] 08/08/2026 15:33:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9107698495413254;StartedAtUtc;00:16:10.3957482;09:15:38.1132264;08:59:27.7174782;False;408;0;0;00:00:00;03:17:30.1248186;03:17:30.1248186;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:28.9636206;00:00:00;02:05:49.1372672;00:16:10.3957482;00:53:49.6165904;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:19:12.6777306 [PrintingService.cs@1918] 08/08/2026 15:33:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=149,printChamber1=149,printChamber2=149,printChamber3=149,printChamber4=149 [ControlledHeating.cs@169] 08/08/2026 15:33:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=160.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 160.65222778320313. Used = 160.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 977.8929611, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 2.933295331325922, Elapsed = 00:16:17.9053194, TimeTotal = 09:15:38.1132461, Remaining = 08:59:20.2079267, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:17:30.1248186, WeightTotalEstimate = 03:17:30.1248186, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 05:59:28.9636206, CoolingElapsed = 00:00:00, CoolingEstimate = 02:05:49.1372672, HeatingElapsed = 00:16:17.9053194, HeatingEstimate = 00:53:42.1070389, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:19:12.6777306, WeightEstimate = 03:17:30.1248186 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:33:12. coolingEstimate=02:05:49.1372672 [PrintingService.cs@1912] 08/08/2026 15:33:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.933295331325922;StartedAtUtc;00:16:17.9053194;09:15:38.1132461;08:59:20.2079267;False;408;0;0;00:00:00;03:17:30.1248186;03:17:30.1248186;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;05:59:28.9636206;00:00:00;02:05:49.1372672;00:16:17.9053194;00:53:42.1070389;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:19:12.6777306 [PrintingService.cs@1918] 08/08/2026 15:33:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=150,printChamber1=150,printChamber2=150,printChamber3=150,printChamber4=150 [ControlledHeating.cs@169] 08/08/2026 15:33:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 150 with temperature 143.25 [HeaterCheck.cs@88] 08/08/2026 15:33:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 145 [HeaterCheck.cs@67] 08/08/2026 15:33:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58 with temperature 46.5 [HeaterCheck.cs@111] 08/08/2026 15:33:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 145 [HeaterCheck.cs@67] 08/08/2026 15:33:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150 with temperature 145.5 [HeaterCheck.cs@67] 08/08/2026 15:33:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 145 [HeaterCheck.cs@67] 08/08/2026 15:33:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 145.25 [HeaterCheck.cs@67] 08/08/2026 15:33:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=161.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:33:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 161.65222778320313. Used = 161.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:33:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 145 [HeaterCheck.cs@67] 08/08/2026 15:33:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=138.25 that are outside of set tolerance 10 for current step target 150 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:34:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=171772, estimate=71.09935159503165 for layer 65, Z=6.501 [PrintingService.cs@1524] 08/08/2026 15:34:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 54, island count 8 [PrintingService.cs@1569] 08/08/2026 15:34:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 66, start=0, count=408, Z=6.601 [PrintingService.cs@1518] 08/08/2026 15:34:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2260, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:34:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 145.25 [HeaterCheck.cs@67] 08/08/2026 15:34:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=162.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 162.65222778320313. Used = 162.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:34:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150 with temperature 146.25 [HeaterCheck.cs@67] 08/08/2026 15:34:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=163.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 163.65222778320313. Used = 163.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150 with temperature 146.25 [HeaterCheck.cs@67] 08/08/2026 15:34:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:34:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:34:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:34:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:34:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:34:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:34:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 150 with temperature 145.75 [HeaterCheck.cs@67] 08/08/2026 15:34:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 150 with temperature 145 [HeaterCheck.cs@67] 08/08/2026 15:34:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=164.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 164.65222778320313. Used = 164.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 150 with temperature 145 [HeaterCheck.cs@67] 08/08/2026 15:34:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135196, estimate=39.29929740557625 for layer 66, Z=6.601 [PrintingService.cs@1524] 08/08/2026 15:34:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 55, island count 8 [PrintingService.cs@1569] 08/08/2026 15:34:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 67, start=0, count=408, Z=6.701 [PrintingService.cs@1518] 08/08/2026 15:34:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1987, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:34:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:34:26 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] 08/08/2026 15:34:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=165.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 165.65222778320313. Used = 165.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:34:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (938 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:34:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 45.5 [HeaterCheck.cs@111] 08/08/2026 15:34:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=166.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 166.65222778320313. Used = 166.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.5 [HeaterCheck.cs@67] 08/08/2026 15:34:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1462636 ~ 6.02 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:34:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:34:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=172423, estimate=45.97526646666111 for layer 67, Z=6.701 [PrintingService.cs@1524] 08/08/2026 15:34:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 56, island count 8 [PrintingService.cs@1569] 08/08/2026 15:34:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 68, start=0, count=408, Z=6.801 [PrintingService.cs@1518] 08/08/2026 15:34:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1880, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:34:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=167.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 167.65222778320313. Used = 167.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54 [HeaterCheck.cs@67] 08/08/2026 15:34:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=168.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 168.65222778320313. Used = 168.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.75 [HeaterCheck.cs@67] 08/08/2026 15:34:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:34:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:34:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=169.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:34:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 169.65222778320313. Used = 169.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:34:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135462, estimate=38.85723482426025 for layer 68, Z=6.801 [PrintingService.cs@1524] 08/08/2026 15:35:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 57, island count 8 [PrintingService.cs@1569] 08/08/2026 15:35:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 69, start=0, count=408, Z=6.901 [PrintingService.cs@1518] 08/08/2026 15:35:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1740, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:35:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=170.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 170.65222778320313. Used = 170.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 150 with temperature 145.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:35:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 150 with temperature 145.10714721679688 [HeaterCheck.cs@67] 08/08/2026 15:35:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=171.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 171.65222778320313. Used = 171.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1058.3998906, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.1678395282387215, Elapsed = 00:17:38.4122311, TimeTotal = 09:16:51.1694000, Remaining = 08:59:12.7571689, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:18:24.2405013, WeightTotalEstimate = 03:18:24.2405013, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:00:23.0793033, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:08.0777562, HeatingElapsed = 00:17:38.4122311, HeatingEstimate = 00:52:21.6001094, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:06.7934133, WeightEstimate = 03:18:24.2405013 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:34:25. coolingEstimate=02:06:08.0777562 [PrintingService.cs@1912] 08/08/2026 15:35:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1678395282387215;StartedAtUtc;00:17:38.4122311;09:16:51.1694000;08:59:12.7571689;False;408;0;0;00:00:00;03:18:24.2405013;03:18:24.2405013;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:00:23.0793033;00:00:00;02:06:08.0777562;00:17:38.4122311;00:52:21.6001094;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:06.7934133 [PrintingService.cs@1918] 08/08/2026 15:35:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=151,printChamber1=151,printChamber2=151,printChamber3=151,printChamber4=151 [ControlledHeating.cs@169] 08/08/2026 15:35:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:13 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 08/08/2026 15:35:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=172.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 172.65222778320313. Used = 172.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=140.25 that are outside of set tolerance 10 for current step target 151 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:35:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58 with temperature 46 [HeaterCheck.cs@111] 08/08/2026 15:35:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1066.9035512, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.1932911017611274, Elapsed = 00:17:46.9158997, TimeTotal = 09:16:51.1694080, Remaining = 08:59:04.2535083, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:18:24.2405013, WeightTotalEstimate = 03:18:24.2405013, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:00:23.0793033, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:08.0777562, HeatingElapsed = 00:17:46.9158997, HeatingEstimate = 00:52:13.0964488, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:06.7934133, WeightEstimate = 03:18:24.2405013 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:34:25. coolingEstimate=02:06:08.0777562 [PrintingService.cs@1912] 08/08/2026 15:35:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1932911017611274;StartedAtUtc;00:17:46.9158997;09:16:51.1694080;08:59:04.2535083;False;408;0;0;00:00:00;03:18:24.2405013;03:18:24.2405013;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:00:23.0793033;00:00:00;02:06:08.0777562;00:17:46.9158997;00:52:13.0964488;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:06.7934133 [PrintingService.cs@1918] 08/08/2026 15:35:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=152,printChamber1=152,printChamber2=152,printChamber3=152,printChamber4=152 [ControlledHeating.cs@169] 08/08/2026 15:35:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=172994, estimate=45.82180029519582 for layer 69, Z=6.901 [PrintingService.cs@1524] 08/08/2026 15:35:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 58, island count 8 [PrintingService.cs@1569] 08/08/2026 15:35:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 70, start=0, count=408, Z=7.001 [PrintingService.cs@1518] 08/08/2026 15:35:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1680, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:35:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 152 with temperature 147.25 [HeaterCheck.cs@67] 08/08/2026 15:35:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=173.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 173.65222778320313. Used = 173.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 152 with temperature 147 [HeaterCheck.cs@67] 08/08/2026 15:35:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 152 with temperature 147.75 [HeaterCheck.cs@67] 08/08/2026 15:35:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1074.404324, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.215709871340751, Elapsed = 00:17:54.4166638, TimeTotal = 09:16:51.4925409, Remaining = 08:58:57.0758771, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:18:24.4798655, WeightTotalEstimate = 03:18:24.4798655, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:00:23.3186675, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:08.1615336, HeatingElapsed = 00:17:54.4166638, HeatingEstimate = 00:52:05.5956760, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:07.0327775, WeightEstimate = 03:18:24.4798655 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:34:25. coolingEstimate=02:06:08.1615336 [PrintingService.cs@1912] 08/08/2026 15:35:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.215709871340751;StartedAtUtc;00:17:54.4166638;09:16:51.4925409;08:58:57.0758771;False;408;0;0;00:00:00;03:18:24.4798655;03:18:24.4798655;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:00:23.3186675;00:00:00;02:06:08.1615336;00:17:54.4166638;00:52:05.5956760;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:07.0327775 [PrintingService.cs@1918] 08/08/2026 15:35:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=153,printChamber1=153,printChamber2=153,printChamber3=153,printChamber4=153 [ControlledHeating.cs@169] 08/08/2026 15:35:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 153 with temperature 147.75 [HeaterCheck.cs@88] 08/08/2026 15:35:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 153 with temperature 146.75 [HeaterCheck.cs@88] 08/08/2026 15:35:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 153 with temperature 147.75 [HeaterCheck.cs@88] 08/08/2026 15:35:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 153 with temperature 148.25 [HeaterCheck.cs@67] 08/08/2026 15:35:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 153 with temperature 148.5 [HeaterCheck.cs@67] 08/08/2026 15:35:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 44.5 [HeaterCheck.cs@111] 08/08/2026 15:35:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153 with temperature 148 [HeaterCheck.cs@67] 08/08/2026 15:35:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 153 with temperature 148.25 [HeaterCheck.cs@67] 08/08/2026 15:35:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153 with temperature 148.5 [HeaterCheck.cs@67] 08/08/2026 15:35:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.25 [HeaterCheck.cs@67] 08/08/2026 15:35:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=174.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 174.65222778320313. Used = 174.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.5 [HeaterCheck.cs@67] 08/08/2026 15:35:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (183 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:35:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153 with temperature 148 [HeaterCheck.cs@67] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1081.9065308, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.238168540488818, Elapsed = 00:18:01.9204929, TimeTotal = 09:16:51.4941632, Remaining = 08:58:49.5736703, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:18:24.4798655, WeightTotalEstimate = 03:18:24.4798655, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:00:23.3186675, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:08.1615336, HeatingElapsed = 00:18:01.9204929, HeatingEstimate = 00:51:58.0934692, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:07.0327775, WeightEstimate = 03:18:24.4798655 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:34:25. coolingEstimate=02:06:08.1615336 [PrintingService.cs@1912] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.238168540488818;StartedAtUtc;00:18:01.9204929;09:16:51.4941632;08:58:49.5736703;False;408;0;0;00:00:00;03:18:24.4798655;03:18:24.4798655;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:00:23.3186675;00:00:00;02:06:08.1615336;00:18:01.9204929;00:51:58.0934692;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:07.0327775 [PrintingService.cs@1918] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=154,printChamber1=154,printChamber2=154,printChamber3=154,printChamber4=154 [ControlledHeating.cs@169] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 154 with temperature 148.75 [HeaterCheck.cs@88] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 154 with temperature 149.25 [HeaterCheck.cs@67] 08/08/2026 15:35:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1645638 ~ 6 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:35:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 154 with temperature 149.75 [HeaterCheck.cs@67] 08/08/2026 15:35:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 154 with temperature 149.25 [HeaterCheck.cs@67] 08/08/2026 15:35:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=175.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 175.65222778320313. Used = 175.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1089.4094175, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.260620537098513, Elapsed = 00:18:09.4219953, TimeTotal = 09:16:51.4927789, Remaining = 08:58:42.0707836, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:18:24.4798655, WeightTotalEstimate = 03:18:24.4798655, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:00:23.3186675, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:08.1615336, HeatingElapsed = 00:18:09.4219953, HeatingEstimate = 00:51:50.5905825, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:07.0327775, WeightEstimate = 03:18:24.4798655 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:34:25. coolingEstimate=02:06:08.1615336 [PrintingService.cs@1912] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.260620537098513;StartedAtUtc;00:18:09.4219953;09:16:51.4927789;08:58:42.0707836;False;408;0;0;00:00:00;03:18:24.4798655;03:18:24.4798655;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:00:23.3186675;00:00:00;02:06:08.1615336;00:18:09.4219953;00:51:50.5905825;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:07.0327775 [PrintingService.cs@1918] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=155,printChamber1=155,printChamber2=155,printChamber3=155,printChamber4=155 [ControlledHeating.cs@169] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 155 with temperature 149.5 [HeaterCheck.cs@88] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.25 [HeaterCheck.cs@67] 08/08/2026 15:35:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135899, estimate=39.37947990597964 for layer 70, Z=7.001 [PrintingService.cs@1524] 08/08/2026 15:35:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 59, island count 8 [PrintingService.cs@1569] 08/08/2026 15:35:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 71, start=0, count=408, Z=7.101 [PrintingService.cs@1518] 08/08/2026 15:35:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1643, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:35:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150.25 [HeaterCheck.cs@67] 08/08/2026 15:35:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.5 [HeaterCheck.cs@67] 08/08/2026 15:35:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150.25 [HeaterCheck.cs@67] 08/08/2026 15:35:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=176.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 176.65222778320313. Used = 176.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:35:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:51 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=143.14285278320312,printChamber2=144.75 that are outside of set tolerance 10 for current step target 155 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:35:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53 [HeaterCheck.cs@67] 08/08/2026 15:35:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:35:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150.25 [HeaterCheck.cs@67] 08/08/2026 15:35:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155 with temperature 150.25 [HeaterCheck.cs@67] 08/08/2026 15:35:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.75 [HeaterCheck.cs@67] 08/08/2026 15:35:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=177.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:35:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 177.65222778320313. Used = 177.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:36:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=178.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 178.65222778320313. Used = 178.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:36:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.25 [HeaterCheck.cs@67] 08/08/2026 15:36:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.5 [HeaterCheck.cs@67] 08/08/2026 15:36:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=172642, estimate=46.782017512439374 for layer 71, Z=7.101 [PrintingService.cs@1524] 08/08/2026 15:36:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 60, island count 8 [PrintingService.cs@1569] 08/08/2026 15:36:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 72, start=0, count=408, Z=7.201 [PrintingService.cs@1518] 08/08/2026 15:36:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1633, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:36:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=179.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 179.65222778320313. Used = 179.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54 [HeaterCheck.cs@67] 08/08/2026 15:36:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=180.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 180.65222778320313. Used = 180.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155 with temperature 150.25 [HeaterCheck.cs@67] 08/08/2026 15:36:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58 with temperature 49.5 [HeaterCheck.cs@111] 08/08/2026 15:36:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:36:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155 with temperature 150 [HeaterCheck.cs@67] 08/08/2026 15:36:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 155 with temperature 150.14285278320312 [HeaterCheck.cs@67] 08/08/2026 15:36:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=181.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 181.65222778320313. Used = 181.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155 with temperature 150.5 [HeaterCheck.cs@67] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1135.9244838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.396032884321995, Elapsed = 00:18:55.9399115, TimeTotal = 09:17:29.0256777, Remaining = 08:58:33.0857662, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:18:52.2799017, WeightTotalEstimate = 03:18:52.2799017, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:00:51.1187037, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:17.8915463, HeatingElapsed = 00:18:55.9399115, HeatingEstimate = 00:51:04.0755162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:34.8328137, WeightEstimate = 03:18:52.2799017 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:03. coolingEstimate=02:06:17.8915463 [PrintingService.cs@1912] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.396032884321995;StartedAtUtc;00:18:55.9399115;09:17:29.0256777;08:58:33.0857662;False;408;0;0;00:00:00;03:18:52.2799017;03:18:52.2799017;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:00:51.1187037;00:00:00;02:06:17.8915463;00:18:55.9399115;00:51:04.0755162;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:34.8328137 [PrintingService.cs@1918] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=156,printChamber1=156,printChamber2=156,printChamber3=156,printChamber4=156 [ControlledHeating.cs@169] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 156 with temperature 150.25 [HeaterCheck.cs@88] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 156 with temperature 150.5 [HeaterCheck.cs@88] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=136500, estimate=39.17206260312191 for layer 72, Z=7.201 [PrintingService.cs@1524] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 61, island count 8 [PrintingService.cs@1569] 08/08/2026 15:36:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 73, start=0, count=408, Z=7.301 [PrintingService.cs@1518] 08/08/2026 15:36:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1502, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:36:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 156 with temperature 151.75 [HeaterCheck.cs@67] 08/08/2026 15:36:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 53.5 [HeaterCheck.cs@67] 08/08/2026 15:36:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 45.5 [HeaterCheck.cs@111] 08/08/2026 15:36:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156 with temperature 151 [HeaterCheck.cs@67] 08/08/2026 15:36:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=182.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 182.65222778320313. Used = 182.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156 with temperature 151 [HeaterCheck.cs@67] 08/08/2026 15:36:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156 with temperature 151 [HeaterCheck.cs@67] 08/08/2026 15:36:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (239 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:36:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156 with temperature 151 [HeaterCheck.cs@67] 08/08/2026 15:36:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=145 that are outside of set tolerance 10 for current step target 156 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:36:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156 with temperature 151 [HeaterCheck.cs@67] 08/08/2026 15:36:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156 with temperature 151 [HeaterCheck.cs@67] 08/08/2026 15:36:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0158686 ~ 6.02 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:36:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54 [HeaterCheck.cs@67] 08/08/2026 15:36:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 156 with temperature 145.5 [HeaterCheck.cs@111] 08/08/2026 15:36:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=183.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 183.65222778320313. Used = 183.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1148.4313291, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.4319924485581117, Elapsed = 00:19:08.4436777, TimeTotal = 09:17:42.8847503, Remaining = 08:58:34.4410726, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:02.5481622, WeightTotalEstimate = 03:19:02.5481622, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:01.3869642, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:21.4854375, HeatingElapsed = 00:19:08.4436777, HeatingEstimate = 00:50:51.5686709, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:20:45.1010742, WeightEstimate = 03:19:02.5481622 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:17. coolingEstimate=02:06:21.4854375 [PrintingService.cs@1912] 08/08/2026 15:36:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.4319924485581117;StartedAtUtc;00:19:08.4436777;09:17:42.8847503;08:58:34.4410726;False;408;0;0;00:00:00;03:19:02.5481622;03:19:02.5481622;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:01.3869642;00:00:00;02:06:21.4854375;00:19:08.4436777;00:50:51.5686709;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:20:45.1010742 [PrintingService.cs@1918] 08/08/2026 15:36:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=157,printChamber1=157,printChamber2=157,printChamber3=157,printChamber4=157 [ControlledHeating.cs@169] 08/08/2026 15:36:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 157 with temperature 151.5 [HeaterCheck.cs@88] 08/08/2026 15:36:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 157 with temperature 152.25 [HeaterCheck.cs@67] 08/08/2026 15:36:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 152 [HeaterCheck.cs@67] 08/08/2026 15:36:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 152 [HeaterCheck.cs@67] 08/08/2026 15:36:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 152 [HeaterCheck.cs@67] 08/08/2026 15:36:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 152 [HeaterCheck.cs@67] 08/08/2026 15:36:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=184.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 184.65222778320313. Used = 184.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 152 [HeaterCheck.cs@67] 08/08/2026 15:36:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=146.75 that are outside of set tolerance 10 for current step target 157 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:36:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 152.25 [HeaterCheck.cs@67] 08/08/2026 15:36:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=173295, estimate=46.101190361916366 for layer 73, Z=7.301 [PrintingService.cs@1524] 08/08/2026 15:36:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 62, island count 8 [PrintingService.cs@1569] 08/08/2026 15:36:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 74, start=0, count=408, Z=7.401 [PrintingService.cs@1518] 08/08/2026 15:36:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1595, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:36:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=185.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:36:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 185.65222778320313. Used = 185.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:36:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 153.25 [HeaterCheck.cs@67] 08/08/2026 15:37:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.5 [HeaterCheck.cs@67] 08/08/2026 15:37:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157 with temperature 153.75 [HeaterCheck.cs@67] 08/08/2026 15:37:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=186.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:37:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 186.65222778320313. Used = 186.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:37:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=136606, estimate=39.49619422716112 for layer 74, Z=7.401 [PrintingService.cs@1524] 08/08/2026 15:37:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 63, island count 8 [PrintingService.cs@1569] 08/08/2026 15:37:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 75, start=0, count=408, Z=7.501 [PrintingService.cs@1518] 08/08/2026 15:37:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1464, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:37:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=187.65222778320313 [ControlledHeating.cs@169] 08/08/2026 15:37:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 187.65222778320313. Used = 187.65222778320313 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:37:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.5 [HeaterCheck.cs@67] 08/08/2026 15:37:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.25 [HeaterCheck.cs@67] 08/08/2026 15:37:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=188 [ControlledHeating.cs@169] 08/08/2026 15:37:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Reached final heat-up-surface target 188 [ControlledHeating.cs@231] 08/08/2026 15:37:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 188. Used = 188 [SoftAnalysisSurfaceHeater.cs@881] 08/08/2026 15:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58 with temperature 49.25 [HeaterCheck.cs@111] 08/08/2026 15:37:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=173878, estimate=46.37542787333556 for layer 75, Z=7.501 [PrintingService.cs@1524] 08/08/2026 15:37:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 64, island count 8 [PrintingService.cs@1569] 08/08/2026 15:37:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 76, start=0, count=408, Z=7.601 [PrintingService.cs@1518] 08/08/2026 15:37:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1461, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:37:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58 with temperature 54.25 [HeaterCheck.cs@67] 08/08/2026 15:37:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (462 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:37:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1487030 ~ 6 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:37:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 157 with temperature 152.75 [HeaterCheck.cs@67] 08/08/2026 15:37:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 157 with temperature 152 [HeaterCheck.cs@67] 08/08/2026 15:37:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=137145, estimate=39.168145772523786 for layer 76, Z=7.601 [PrintingService.cs@1524] 08/08/2026 15:37:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 65, island count 8 [PrintingService.cs@1569] 08/08/2026 15:37:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 77, start=0, count=408, Z=7.701 [PrintingService.cs@1518] 08/08/2026 15:37:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1415, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:37:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58 with temperature 44.25 [HeaterCheck.cs@111] 08/08/2026 15:37:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 157 with temperature 152.17857360839844 [HeaterCheck.cs@67] 08/08/2026 15:38:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 157 with temperature 145.25 [HeaterCheck.cs@111] 08/08/2026 15:38:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=59,powderChamber1=59,powderChamber2=59,powderChamber3=59,powderChamber4=59 [ControlledHeating.cs@169] 08/08/2026 15:38:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1232.9518066, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.6820398099729914, Elapsed = 00:20:32.9642024, TimeTotal = 09:18:05.9009145, Remaining = 08:57:32.9367121, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:19.5971378, WeightTotalEstimate = 03:19:19.5971378, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:18.4359398, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:27.4525789, HeatingElapsed = 00:20:32.9642024, HeatingEstimate = 00:49:27.0481934, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:02.1500498, WeightEstimate = 03:19:19.5971378 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:40. coolingEstimate=02:06:27.4525789 [PrintingService.cs@1912] 08/08/2026 15:38:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.6820398099729914;StartedAtUtc;00:20:32.9642024;09:18:05.9009145;08:57:32.9367121;False;408;0;0;00:00:00;03:19:19.5971378;03:19:19.5971378;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:18.4359398;00:00:00;02:06:27.4525789;00:20:32.9642024;00:49:27.0481934;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:02.1500498 [PrintingService.cs@1918] 08/08/2026 15:38:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=158,printChamber1=158,printChamber2=158,printChamber3=158,printChamber4=158 [ControlledHeating.cs@169] 08/08/2026 15:38:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59 with temperature 55 [HeaterCheck.cs@67] 08/08/2026 15:38:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=48.5 that are outside of set tolerance 10 for current step target 59 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:38:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59 with temperature 54 [HeaterCheck.cs@67] 08/08/2026 15:38:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=174725, estimate=46.479602222870426 for layer 77, Z=7.701 [PrintingService.cs@1524] 08/08/2026 15:38:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 66, island count 8 [PrintingService.cs@1569] 08/08/2026 15:38:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 78, start=0, count=408, Z=7.801 [PrintingService.cs@1518] 08/08/2026 15:38:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1418, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:38:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=147 that are outside of set tolerance 10 for current step target 158 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:38:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1241.4512883, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.7060901470675525, Elapsed = 00:20:41.4638431, TimeTotal = 09:18:17.9397110, Remaining = 08:57:36.4758679, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:28.5146470, WeightTotalEstimate = 03:19:28.5146470, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:27.3534490, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:30.5737072, HeatingElapsed = 00:20:41.4638431, HeatingEstimate = 00:49:18.5487117, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:11.0675590, WeightEstimate = 03:19:28.5146470 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:52. coolingEstimate=02:06:30.5737072 [PrintingService.cs@1912] 08/08/2026 15:38:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.7060901470675525;StartedAtUtc;00:20:41.4638431;09:18:17.9397110;08:57:36.4758679;False;408;0;0;00:00:00;03:19:28.5146470;03:19:28.5146470;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:27.3534490;00:00:00;02:06:30.5737072;00:20:41.4638431;00:49:18.5487117;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:11.0675590 [PrintingService.cs@1918] 08/08/2026 15:38:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=159,printChamber1=159,printChamber2=159,printChamber3=159,printChamber4=159 [ControlledHeating.cs@169] 08/08/2026 15:38:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 159 with temperature 153.25 [HeaterCheck.cs@88] 08/08/2026 15:38:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 159 with temperature 153.75 [HeaterCheck.cs@88] 08/08/2026 15:38:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 159 with temperature 154.25 [HeaterCheck.cs@67] 08/08/2026 15:38:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 159 with temperature 154 [HeaterCheck.cs@67] 08/08/2026 15:38:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159 with temperature 155 [HeaterCheck.cs@67] 08/08/2026 15:38:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159 with temperature 154 [HeaterCheck.cs@67] 08/08/2026 15:38:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=60,powderChamber1=60,powderChamber2=60,powderChamber3=60,powderChamber4=60 [ControlledHeating.cs@169] 08/08/2026 15:38:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 60 with temperature 54.75 [HeaterCheck.cs@88] 08/08/2026 15:38:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159 with temperature 154 [HeaterCheck.cs@67] 08/08/2026 15:38:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55.25 [HeaterCheck.cs@67] 08/08/2026 15:38:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 159 with temperature 154 [HeaterCheck.cs@67] 08/08/2026 15:38:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55.25 [HeaterCheck.cs@67] 08/08/2026 15:38:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159 with temperature 154 [HeaterCheck.cs@67] 08/08/2026 15:38:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 159 with temperature 154 [HeaterCheck.cs@67] 08/08/2026 15:38:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55 [HeaterCheck.cs@67] 08/08/2026 15:38:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1248.9588789, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.728501625746682, Elapsed = 00:20:48.9712187, TimeTotal = 09:18:17.9394960, Remaining = 08:57:28.9682773, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:28.5146470, WeightTotalEstimate = 03:19:28.5146470, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:27.3534490, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:30.5737072, HeatingElapsed = 00:20:48.9712187, HeatingEstimate = 00:49:11.0411211, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:11.0675590, WeightEstimate = 03:19:28.5146470 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:52. coolingEstimate=02:06:30.5737072 [PrintingService.cs@1912] 08/08/2026 15:38:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.728501625746682;StartedAtUtc;00:20:48.9712187;09:18:17.9394960;08:57:28.9682773;False;408;0;0;00:00:00;03:19:28.5146470;03:19:28.5146470;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:27.3534490;00:00:00;02:06:30.5737072;00:20:48.9712187;00:49:11.0411211;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:11.0675590 [PrintingService.cs@1918] 08/08/2026 15:38:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=160,printChamber1=160,printChamber2=160,printChamber3=160,printChamber4=160 [ControlledHeating.cs@169] 08/08/2026 15:38:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 160 with temperature 153.75 [HeaterCheck.cs@88] 08/08/2026 15:38:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 160 with temperature 153 [HeaterCheck.cs@88] 08/08/2026 15:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55 [HeaterCheck.cs@67] 08/08/2026 15:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 160 with temperature 155.5 [HeaterCheck.cs@67] 08/08/2026 15:38:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 160 with temperature 155 [HeaterCheck.cs@67] 08/08/2026 15:38:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55 [HeaterCheck.cs@67] 08/08/2026 15:38:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 160 with temperature 155.25 [HeaterCheck.cs@67] 08/08/2026 15:38:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55 [HeaterCheck.cs@67] 08/08/2026 15:38:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60 with temperature 55 [HeaterCheck.cs@67] 08/08/2026 15:38:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=61,powderChamber1=61,powderChamber2=61,powderChamber3=61,powderChamber4=61 [ControlledHeating.cs@169] 08/08/2026 15:38:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 61 with temperature 55 [HeaterCheck.cs@88] 08/08/2026 15:38:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 160 with temperature 155.5 [HeaterCheck.cs@67] 08/08/2026 15:38:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 160 with temperature 155.25 [HeaterCheck.cs@67] 08/08/2026 15:38:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 160 with temperature 155 [HeaterCheck.cs@67] 08/08/2026 15:38:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1256.4643997, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.7509076544907662, Elapsed = 00:20:56.4767781, TimeTotal = 09:18:17.9395346, Remaining = 08:57:21.4627565, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:28.5146470, WeightTotalEstimate = 03:19:28.5146470, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:27.3534490, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:30.5737072, HeatingElapsed = 00:20:56.4767781, HeatingEstimate = 00:49:03.5356003, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:11.0675590, WeightEstimate = 03:19:28.5146470 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:52. coolingEstimate=02:06:30.5737072 [PrintingService.cs@1912] 08/08/2026 15:38:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.7509076544907662;StartedAtUtc;00:20:56.4767781;09:18:17.9395346;08:57:21.4627565;False;408;0;0;00:00:00;03:19:28.5146470;03:19:28.5146470;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:27.3534490;00:00:00;02:06:30.5737072;00:20:56.4767781;00:49:03.5356003;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:11.0675590 [PrintingService.cs@1918] 08/08/2026 15:38:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=161,printChamber1=161,printChamber2=161,printChamber3=161,printChamber4=161 [ControlledHeating.cs@169] 08/08/2026 15:38:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 161 with temperature 155 [HeaterCheck.cs@88] 08/08/2026 15:38:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.75 [HeaterCheck.cs@67] 08/08/2026 15:38:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=47.75 that are outside of set tolerance 10 for current step target 61 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:38:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161 with temperature 156 [HeaterCheck.cs@67] 08/08/2026 15:38:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=137516, estimate=39.77409173448166 for layer 78, Z=7.801 [PrintingService.cs@1524] 08/08/2026 15:38:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161 with temperature 156.25 [HeaterCheck.cs@67] 08/08/2026 15:38:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 67, island count 8 [PrintingService.cs@1569] 08/08/2026 15:38:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 79, start=0, count=408, Z=7.901 [PrintingService.cs@1518] 08/08/2026 15:38:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1408, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:38:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161 with temperature 156.25 [HeaterCheck.cs@67] 08/08/2026 15:38:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1263.9645589, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.772368703379228, Elapsed = 00:21:03.9768967, TimeTotal = 09:18:26.1865922, Remaining = 08:57:22.2096955, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:34.6236087, WeightTotalEstimate = 03:19:34.6236087, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:33.4624107, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:32.7118437, HeatingElapsed = 00:21:03.9768967, HeatingEstimate = 00:48:56.0354411, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:17.1765207, WeightEstimate = 03:19:34.6236087 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:00. coolingEstimate=02:06:32.7118437 [PrintingService.cs@1912] 08/08/2026 15:38:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.772368703379228;StartedAtUtc;00:21:03.9768967;09:18:26.1865922;08:57:22.2096955;False;408;0;0;00:00:00;03:19:34.6236087;03:19:34.6236087;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:33.4624107;00:00:00;02:06:32.7118437;00:21:03.9768967;00:48:56.0354411;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:17.1765207 [PrintingService.cs@1918] 08/08/2026 15:38:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=162,printChamber1=162,printChamber2=162,printChamber3=162,printChamber4=162 [ControlledHeating.cs@169] 08/08/2026 15:38:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 162 with temperature 156.25 [HeaterCheck.cs@88] 08/08/2026 15:38:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0693330 ~ 6.01 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:38:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 162 with temperature 157 [HeaterCheck.cs@67] 08/08/2026 15:38:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:38:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 162 with temperature 157.25 [HeaterCheck.cs@67] 08/08/2026 15:38:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 162 with temperature 157 [HeaterCheck.cs@67] 08/08/2026 15:38:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (430 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:38:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=151.5 that are outside of set tolerance 10 for current step target 162 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:38:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1272.4652606, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.7977393980686918, Elapsed = 00:21:12.4776510, TimeTotal = 09:18:26.1866448, Remaining = 08:57:13.7089938, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:34.6236087, WeightTotalEstimate = 03:19:34.6236087, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:33.4624107, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:32.7118437, HeatingElapsed = 00:21:12.4776510, HeatingEstimate = 00:48:47.5347394, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:17.1765207, WeightEstimate = 03:19:34.6236087 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:00. coolingEstimate=02:06:32.7118437 [PrintingService.cs@1912] 08/08/2026 15:38:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.7977393980686918;StartedAtUtc;00:21:12.4776510;09:18:26.1866448;08:57:13.7089938;False;408;0;0;00:00:00;03:19:34.6236087;03:19:34.6236087;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:33.4624107;00:00:00;02:06:32.7118437;00:21:12.4776510;00:48:47.5347394;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:17.1765207 [PrintingService.cs@1918] 08/08/2026 15:38:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=163,printChamber1=163,printChamber2=163,printChamber3=163,printChamber4=163 [ControlledHeating.cs@169] 08/08/2026 15:38:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 61 with temperature 51.25 [HeaterCheck.cs@111] 08/08/2026 15:38:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163 with temperature 158.25 [HeaterCheck.cs@67] 08/08/2026 15:38:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163 with temperature 158.25 [HeaterCheck.cs@67] 08/08/2026 15:38:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163 with temperature 158 [HeaterCheck.cs@67] 08/08/2026 15:38:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=152 that are outside of set tolerance 10 for current step target 163 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1282.9725062, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.829099060359446, Elapsed = 00:21:22.9850852, TimeTotal = 09:18:26.1868334, Remaining = 08:57:03.2017482, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:34.6236087, WeightTotalEstimate = 03:19:34.6236087, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:33.4624107, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:32.7118437, HeatingElapsed = 00:21:22.9850852, HeatingEstimate = 00:48:37.0274938, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:17.1765207, WeightEstimate = 03:19:34.6236087 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:00. coolingEstimate=02:06:32.7118437 [PrintingService.cs@1912] 08/08/2026 15:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.829099060359446;StartedAtUtc;00:21:22.9850852;09:18:26.1868334;08:57:03.2017482;False;408;0;0;00:00:00;03:19:34.6236087;03:19:34.6236087;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:33.4624107;00:00:00;02:06:32.7118437;00:21:22.9850852;00:48:37.0274938;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:17.1765207 [PrintingService.cs@1918] 08/08/2026 15:38:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=164,printChamber1=164,printChamber2=164,printChamber3=164,printChamber4=164 [ControlledHeating.cs@169] 08/08/2026 15:38:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 61 with temperature 47.75 [HeaterCheck.cs@111] 08/08/2026 15:39:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 57.25 [HeaterCheck.cs@67] 08/08/2026 15:39:04 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=153.25 that are outside of set tolerance 10 for current step target 164 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1291.4814336, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.8544935312453865, Elapsed = 00:21:31.4937957, TimeTotal = 09:18:26.1866165, Remaining = 08:56:54.6928208, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:34.6236087, WeightTotalEstimate = 03:19:34.6236087, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:33.4624107, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:32.7118437, HeatingElapsed = 00:21:31.4937957, HeatingEstimate = 00:48:28.5185664, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:17.1765207, WeightEstimate = 03:19:34.6236087 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:00. coolingEstimate=02:06:32.7118437 [PrintingService.cs@1912] 08/08/2026 15:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.8544935312453865;StartedAtUtc;00:21:31.4937957;09:18:26.1866165;08:56:54.6928208;False;408;0;0;00:00:00;03:19:34.6236087;03:19:34.6236087;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:33.4624107;00:00:00;02:06:32.7118437;00:21:31.4937957;00:48:28.5185664;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:17.1765207 [PrintingService.cs@1918] 08/08/2026 15:39:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=165,printChamber1=165,printChamber2=165,printChamber3=165,printChamber4=165 [ControlledHeating.cs@169] 08/08/2026 15:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=174848, estimate=46.76311582927089 for layer 79, Z=7.901 [PrintingService.cs@1524] 08/08/2026 15:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 68, island count 8 [PrintingService.cs@1569] 08/08/2026 15:39:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 80, start=0, count=408, Z=8.001 [PrintingService.cs@1518] 08/08/2026 15:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1462, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:39:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.5 [HeaterCheck.cs@67] 08/08/2026 15:39:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 165 with temperature 160.0357208251953 [HeaterCheck.cs@67] 08/08/2026 15:39:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 165 with temperature 160.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:39:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 165 with temperature 160.25 [HeaterCheck.cs@67] 08/08/2026 15:39:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1298.9854997, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.8774170115287903, Elapsed = 00:21:38.9978371, TimeTotal = 09:18:21.6283582, Remaining = 08:56:42.6305211, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:31.2471393, WeightTotalEstimate = 03:19:31.2471393, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:30.0859413, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:31.5300795, HeatingElapsed = 00:21:38.9978371, HeatingEstimate = 00:48:21.0145003, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:13.8000513, WeightEstimate = 03:19:31.2471393 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:55. coolingEstimate=02:06:31.5300795 [PrintingService.cs@1912] 08/08/2026 15:39:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.8774170115287903;StartedAtUtc;00:21:38.9978371;09:18:21.6283582;08:56:42.6305211;False;408;0;0;00:00:00;03:19:31.2471393;03:19:31.2471393;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:30.0859413;00:00:00;02:06:31.5300795;00:21:38.9978371;00:48:21.0145003;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:13.8000513 [PrintingService.cs@1918] 08/08/2026 15:39:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=166,printChamber1=166,printChamber2=166,printChamber3=166,printChamber4=166 [ControlledHeating.cs@169] 08/08/2026 15:39:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:39:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:39:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:39:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:39:14 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:39:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:39:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1306.4875364, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.8998100570067127, Elapsed = 00:21:46.4998719, TimeTotal = 09:18:21.6283563, Remaining = 08:56:35.1284844, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:31.2471393, WeightTotalEstimate = 03:19:31.2471393, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:30.0859413, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:31.5300795, HeatingElapsed = 00:21:46.4998719, HeatingEstimate = 00:48:13.5124636, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:13.8000513, WeightEstimate = 03:19:31.2471393 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:35:55. coolingEstimate=02:06:31.5300795 [PrintingService.cs@1912] 08/08/2026 15:39:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.8998100570067127;StartedAtUtc;00:21:46.4998719;09:18:21.6283563;08:56:35.1284844;False;408;0;0;00:00:00;03:19:31.2471393;03:19:31.2471393;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:30.0859413;00:00:00;02:06:31.5300795;00:21:46.4998719;00:48:13.5124636;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:13.8000513 [PrintingService.cs@1918] 08/08/2026 15:39:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=167,printChamber1=167,printChamber2=167,printChamber3=167,printChamber4=167 [ControlledHeating.cs@169] 08/08/2026 15:39:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 167 with temperature 162 [HeaterCheck.cs@67] 08/08/2026 15:39:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=139162, estimate=39.8230298885623 for layer 80, Z=8.001 [PrintingService.cs@1524] 08/08/2026 15:39:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 69, island count 8 [PrintingService.cs@1569] 08/08/2026 15:39:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 81, start=0, count=408, Z=8.101001 [PrintingService.cs@1518] 08/08/2026 15:39:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1485, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:39:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1313.9890534, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.9212847332683736, Elapsed = 00:21:54.0014243, TimeTotal = 09:18:29.4621707, Remaining = 08:56:35.4607464, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:37.0499386, WeightTotalEstimate = 03:19:37.0499386, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:35.8887406, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:33.5610592, HeatingElapsed = 00:21:54.0014243, HeatingEstimate = 00:48:06.0109466, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:19.6028506, WeightEstimate = 03:19:37.0499386 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:03. coolingEstimate=02:06:33.5610592 [PrintingService.cs@1912] 08/08/2026 15:39:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.9212847332683736;StartedAtUtc;00:21:54.0014243;09:18:29.4621707;08:56:35.4607464;False;408;0;0;00:00:00;03:19:37.0499386;03:19:37.0499386;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:35.8887406;00:00:00;02:06:33.5610592;00:21:54.0014243;00:48:06.0109466;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:19.6028506 [PrintingService.cs@1918] 08/08/2026 15:39:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=168,printChamber1=168,printChamber2=168,printChamber3=168,printChamber4=168 [ControlledHeating.cs@169] 08/08/2026 15:39:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 168 with temperature 163.5 [HeaterCheck.cs@67] 08/08/2026 15:39:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 168 with temperature 163 [HeaterCheck.cs@67] 08/08/2026 15:39:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 168 with temperature 163.5 [HeaterCheck.cs@67] 08/08/2026 15:39:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1321.4905727, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.9436709116779927, Elapsed = 00:22:01.5029110, TimeTotal = 09:18:29.4621381, Remaining = 08:56:27.9592271, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:37.0499386, WeightTotalEstimate = 03:19:37.0499386, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:35.8887406, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:33.5610592, HeatingElapsed = 00:22:01.5029110, HeatingEstimate = 00:47:58.5094273, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:19.6028506, WeightEstimate = 03:19:37.0499386 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:03. coolingEstimate=02:06:33.5610592 [PrintingService.cs@1912] 08/08/2026 15:39:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.9436709116779927;StartedAtUtc;00:22:01.5029110;09:18:29.4621381;08:56:27.9592271;False;408;0;0;00:00:00;03:19:37.0499386;03:19:37.0499386;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:35.8887406;00:00:00;02:06:33.5610592;00:22:01.5029110;00:47:58.5094273;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:19.6028506 [PrintingService.cs@1918] 08/08/2026 15:39:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=169,printChamber1=169,printChamber2=169,printChamber3=169,printChamber4=169 [ControlledHeating.cs@169] 08/08/2026 15:39:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 169 with temperature 163.5 [HeaterCheck.cs@88] 08/08/2026 15:39:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 57.75 [HeaterCheck.cs@67] 08/08/2026 15:39:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.5 [HeaterCheck.cs@67] 08/08/2026 15:39:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1044085 ~ 6.01 samples/sec, 28 resets, 2 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:39:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=157.5 that are outside of set tolerance 10 for current step target 169 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:39:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.5 [HeaterCheck.cs@67] 08/08/2026 15:39:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 169 with temperature 164 [HeaterCheck.cs@67] 08/08/2026 15:39:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=177956, estimate=49.45449043489988 for layer 81, Z=8.101001 [PrintingService.cs@1524] 08/08/2026 15:39:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 70, island count 8 [PrintingService.cs@1569] 08/08/2026 15:39:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 82, start=0, count=408, Z=8.201 [PrintingService.cs@1518] 08/08/2026 15:39:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1571, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:39:52 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (243 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:39:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1340.0028793, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 3.9988585311075275, Elapsed = 00:22:20.0153012, TimeTotal = 09:18:29.9451700, Remaining = 08:56:09.9298688, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:37.4076781, WeightTotalEstimate = 03:19:37.4076781, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:36.2464801, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:33.6862680, HeatingElapsed = 00:22:20.0153012, HeatingEstimate = 00:47:39.9971207, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:19.9605901, WeightEstimate = 03:19:37.4076781 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:04. coolingEstimate=02:06:33.6862680 [PrintingService.cs@1912] 08/08/2026 15:39:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.9988585311075275;StartedAtUtc;00:22:20.0153012;09:18:29.9451700;08:56:09.9298688;False;408;0;0;00:00:00;03:19:37.4076781;03:19:37.4076781;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:36.2464801;00:00:00;02:06:33.6862680;00:22:20.0153012;00:47:39.9971207;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:19.9605901 [PrintingService.cs@1918] 08/08/2026 15:39:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=170,printChamber1=170,printChamber2=170,printChamber3=170,printChamber4=170 [ControlledHeating.cs@169] 08/08/2026 15:39:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 170 with temperature 164.10714721679688 [HeaterCheck.cs@88] 08/08/2026 15:39:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:39:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.5 [HeaterCheck.cs@67] 08/08/2026 15:39:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 61 with temperature 52 [HeaterCheck.cs@111] 08/08/2026 15:39:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:39:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:40:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=159 that are outside of set tolerance 10 for current step target 170 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:40:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1348.5125719, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.024255463514457, Elapsed = 00:22:28.5258331, TimeTotal = 09:18:29.9460093, Remaining = 08:56:01.4201762, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:37.4076781, WeightTotalEstimate = 03:19:37.4076781, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:36.2464801, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:33.6862680, HeatingElapsed = 00:22:28.5258331, HeatingEstimate = 00:47:31.4874281, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:19.9605901, WeightEstimate = 03:19:37.4076781 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:04. coolingEstimate=02:06:33.6862680 [PrintingService.cs@1912] 08/08/2026 15:40:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.024255463514457;StartedAtUtc;00:22:28.5258331;09:18:29.9460093;08:56:01.4201762;False;408;0;0;00:00:00;03:19:37.4076781;03:19:37.4076781;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:36.2464801;00:00:00;02:06:33.6862680;00:22:28.5258331;00:47:31.4874281;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:19.9605901 [PrintingService.cs@1918] 08/08/2026 15:40:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=171,printChamber1=171,printChamber2=171,printChamber3=171,printChamber4=171 [ControlledHeating.cs@169] 08/08/2026 15:40:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:40:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:40:10 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=160 that are outside of set tolerance 10 for current step target 171 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:40:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:40:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=140507, estimate=40.41617776635397 for layer 82, Z=8.201 [PrintingService.cs@1524] 08/08/2026 15:40:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 71, island count 8 [PrintingService.cs@1569] 08/08/2026 15:40:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 83, start=0, count=408, Z=8.301001 [PrintingService.cs@1518] 08/08/2026 15:40:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1482, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:40:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.5 [HeaterCheck.cs@67] 08/08/2026 15:40:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:40:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171 with temperature 166 [HeaterCheck.cs@67] 08/08/2026 15:40:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 171 with temperature 166 [HeaterCheck.cs@67] 08/08/2026 15:40:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171 with temperature 166.25 [HeaterCheck.cs@67] 08/08/2026 15:40:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 171 with temperature 167 [HeaterCheck.cs@67] 08/08/2026 15:40:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171 with temperature 166 [HeaterCheck.cs@67] 08/08/2026 15:40:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171 with temperature 166.25 [HeaterCheck.cs@67] 08/08/2026 15:40:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171 with temperature 166 [HeaterCheck.cs@67] 08/08/2026 15:40:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 171 with temperature 166.25 [HeaterCheck.cs@67] 08/08/2026 15:40:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171 with temperature 166.25 [HeaterCheck.cs@67] 08/08/2026 15:40:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1370.0237583, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.087347333345528, Elapsed = 00:22:50.0360983, TimeTotal = 09:18:38.9546316, Remaining = 08:55:48.9185333, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:44.0814140, WeightTotalEstimate = 03:19:44.0814140, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:42.9202160, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:36.0220756, HeatingElapsed = 00:22:50.0360983, HeatingEstimate = 00:47:09.9762417, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:26.6343260, WeightEstimate = 03:19:44.0814140 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:13. coolingEstimate=02:06:36.0220756 [PrintingService.cs@1912] 08/08/2026 15:40:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.087347333345528;StartedAtUtc;00:22:50.0360983;09:18:38.9546316;08:55:48.9185333;False;408;0;0;00:00:00;03:19:44.0814140;03:19:44.0814140;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:42.9202160;00:00:00;02:06:36.0220756;00:22:50.0360983;00:47:09.9762417;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:26.6343260 [PrintingService.cs@1918] 08/08/2026 15:40:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=172,printChamber1=172,printChamber2=172,printChamber3=172,printChamber4=172 [ControlledHeating.cs@169] 08/08/2026 15:40:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 172 with temperature 166.25 [HeaterCheck.cs@88] 08/08/2026 15:40:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 172 with temperature 166.25 [HeaterCheck.cs@88] 08/08/2026 15:40:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 172 with temperature 166.5 [HeaterCheck.cs@88] 08/08/2026 15:40:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] 08/08/2026 15:40:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 168.75 [HeaterCheck.cs@67] 08/08/2026 15:40:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] 08/08/2026 15:40:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] 08/08/2026 15:40:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] 08/08/2026 15:40:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172 with temperature 167.5 [HeaterCheck.cs@67] 08/08/2026 15:40:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] 08/08/2026 15:40:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172 with temperature 167.75 [HeaterCheck.cs@67] 08/08/2026 15:40:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.75 [HeaterCheck.cs@67] 08/08/2026 15:40:31 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=161.39285278320312 that are outside of set tolerance 10 for current step target 172 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:40:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1378.5235618, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.112705532900176, Elapsed = 00:22:58.5359017, TimeTotal = 09:18:38.9546315, Remaining = 08:55:40.4187298, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:44.0814140, WeightTotalEstimate = 03:19:44.0814140, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:42.9202160, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:36.0220756, HeatingElapsed = 00:22:58.5359017, HeatingEstimate = 00:47:01.4764382, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:26.6343260, WeightEstimate = 03:19:44.0814140 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:13. coolingEstimate=02:06:36.0220756 [PrintingService.cs@1912] 08/08/2026 15:40:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.112705532900176;StartedAtUtc;00:22:58.5359017;09:18:38.9546315;08:55:40.4187298;False;408;0;0;00:00:00;03:19:44.0814140;03:19:44.0814140;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:42.9202160;00:00:00;02:06:36.0220756;00:22:58.5359017;00:47:01.4764382;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:26.6343260 [PrintingService.cs@1918] 08/08/2026 15:40:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=173,printChamber1=173,printChamber2=173,printChamber3=173,printChamber4=173 [ControlledHeating.cs@169] 08/08/2026 15:40:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 173 with temperature 167.75 [HeaterCheck.cs@88] 08/08/2026 15:40:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 173 with temperature 167.5 [HeaterCheck.cs@88] 08/08/2026 15:40:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168.5 [HeaterCheck.cs@67] 08/08/2026 15:40:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] 08/08/2026 15:40:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] 08/08/2026 15:40:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] 08/08/2026 15:40:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 173 with temperature 168.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:40:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] 08/08/2026 15:40:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] 08/08/2026 15:40:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] 08/08/2026 15:40:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] 08/08/2026 15:40:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0436565 ~ 6.01 samples/sec, 28 resets, 2 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:40:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=179571, estimate=50.156634951593816 for layer 83, Z=8.301001 [PrintingService.cs@1524] 08/08/2026 15:40:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 72, island count 8 [PrintingService.cs@1569] 08/08/2026 15:40:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 84, start=0, count=408, Z=8.401001 [PrintingService.cs@1518] 08/08/2026 15:40:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1553, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:40:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1386.0235114, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.134927689461372, Elapsed = 00:23:06.0358653, TimeTotal = 09:18:40.1959839, Remaining = 08:55:34.1601186, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:45.0009239, WeightTotalEstimate = 03:19:45.0009239, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:43.8397259, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:36.3439041, HeatingElapsed = 00:23:06.0358653, HeatingEstimate = 00:46:53.9764886, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:27.5538359, WeightEstimate = 03:19:45.0009239 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:14. coolingEstimate=02:06:36.3439041 [PrintingService.cs@1912] 08/08/2026 15:40:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.134927689461372;StartedAtUtc;00:23:06.0358653;09:18:40.1959839;08:55:34.1601186;False;408;0;0;00:00:00;03:19:45.0009239;03:19:45.0009239;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:43.8397259;00:00:00;02:06:36.3439041;00:23:06.0358653;00:46:53.9764886;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:27.5538359 [PrintingService.cs@1918] 08/08/2026 15:40:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=174,printChamber1=174,printChamber2=174,printChamber3=174,printChamber4=174 [ControlledHeating.cs@169] 08/08/2026 15:40:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 174 with temperature 168.75 [HeaterCheck.cs@88] 08/08/2026 15:40:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 174 with temperature 168 [HeaterCheck.cs@88] 08/08/2026 15:40:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.5 [HeaterCheck.cs@67] 08/08/2026 15:40:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 174 with temperature 169.25 [HeaterCheck.cs@67] 08/08/2026 15:40:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174 with temperature 169.75 [HeaterCheck.cs@67] 08/08/2026 15:40:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 174 with temperature 169 [HeaterCheck.cs@67] 08/08/2026 15:40:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1393.5285647, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.157317340276921, Elapsed = 00:23:13.5409202, TimeTotal = 09:18:40.1959855, Remaining = 08:55:26.6550653, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:45.0009239, WeightTotalEstimate = 03:19:45.0009239, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:43.8397259, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:36.3439041, HeatingElapsed = 00:23:13.5409202, HeatingEstimate = 00:46:46.4714353, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:27.5538359, WeightEstimate = 03:19:45.0009239 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:14. coolingEstimate=02:06:36.3439041 [PrintingService.cs@1912] 08/08/2026 15:40:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.157317340276921;StartedAtUtc;00:23:13.5409202;09:18:40.1959855;08:55:26.6550653;False;408;0;0;00:00:00;03:19:45.0009239;03:19:45.0009239;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:43.8397259;00:00:00;02:06:36.3439041;00:23:13.5409202;00:46:46.4714353;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:27.5538359 [PrintingService.cs@1918] 08/08/2026 15:40:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=175,printChamber1=175,printChamber2=175,printChamber3=175,printChamber4=175 [ControlledHeating.cs@169] 08/08/2026 15:40:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=161.5 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:40:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 175 with temperature 169.25 [HeaterCheck.cs@88] 08/08/2026 15:40:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 61 with temperature 48.5 [HeaterCheck.cs@111] 08/08/2026 15:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170.75 [HeaterCheck.cs@67] 08/08/2026 15:40:52 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (210 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:40:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170.5 [HeaterCheck.cs@67] 08/08/2026 15:40:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:40:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:40:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170.25 [HeaterCheck.cs@67] 08/08/2026 15:40:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 56.75 [HeaterCheck.cs@67] 08/08/2026 15:41:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170.25 [HeaterCheck.cs@67] 08/08/2026 15:41:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=141429, estimate=40.13160371414452 for layer 84, Z=8.401001 [PrintingService.cs@1524] 08/08/2026 15:41:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 73, island count 8 [PrintingService.cs@1569] 08/08/2026 15:41:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 85, start=0, count=408, Z=8.501 [PrintingService.cs@1518] 08/08/2026 15:41:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1613, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:41:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 61 with temperature 53.25 [HeaterCheck.cs@111] 08/08/2026 15:41:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 175 with temperature 170.07142639160156 [HeaterCheck.cs@67] 08/08/2026 15:41:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1417.5418815, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.227954507201405, Elapsed = 00:23:37.5542302, TimeTotal = 09:18:48.1334694, Remaining = 08:55:10.5792392, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:50.8805467, WeightTotalEstimate = 03:19:50.8805467, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:49.7193487, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:38.4017720, HeatingElapsed = 00:23:37.5542302, HeatingEstimate = 00:46:22.4581185, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:33.4334587, WeightEstimate = 03:19:50.8805467 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:22. coolingEstimate=02:06:38.4017720 [PrintingService.cs@1912] 08/08/2026 15:41:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.227954507201405;StartedAtUtc;00:23:37.5542302;09:18:48.1334694;08:55:10.5792392;False;408;0;0;00:00:00;03:19:50.8805467;03:19:50.8805467;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:49.7193487;00:00:00;02:06:38.4017720;00:23:37.5542302;00:46:22.4581185;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:33.4334587 [PrintingService.cs@1918] 08/08/2026 15:41:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=162.5 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:41:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1423.5445186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.245857823906155, Elapsed = 00:23:43.5568786, TimeTotal = 09:18:48.1334807, Remaining = 08:55:04.5766021, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:50.8805467, WeightTotalEstimate = 03:19:50.8805467, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:49.7193487, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:38.4017720, HeatingElapsed = 00:23:43.5568786, HeatingEstimate = 00:46:16.4554814, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:33.4334587, WeightEstimate = 03:19:50.8805467 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:22. coolingEstimate=02:06:38.4017720 [PrintingService.cs@1912] 08/08/2026 15:41:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.245857823906155;StartedAtUtc;00:23:43.5568786;09:18:48.1334807;08:55:04.5766021;False;408;0;0;00:00:00;03:19:50.8805467;03:19:50.8805467;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:49.7193487;00:00:00;02:06:38.4017720;00:23:43.5568786;00:46:16.4554814;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:33.4334587 [PrintingService.cs@1918] 08/08/2026 15:41:18 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=163.5 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:41:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170.75 [HeaterCheck.cs@67] 08/08/2026 15:41:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 171.25 [HeaterCheck.cs@67] 08/08/2026 15:41:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=180580, estimate=49.60474641386346 for layer 85, Z=8.501 [PrintingService.cs@1524] 08/08/2026 15:41:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 74, island count 8 [PrintingService.cs@1569] 08/08/2026 15:41:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 86, start=0, count=408, Z=8.601001 [PrintingService.cs@1518] 08/08/2026 15:41:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1430.5492879, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.266747475661533, Elapsed = 00:23:50.5616656, TimeTotal = 09:18:48.1540274, Remaining = 08:54:57.5923618, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:50.8957533, WeightTotalEstimate = 03:19:50.8957533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:49.7345553, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:38.4070944, HeatingElapsed = 00:23:50.5616656, HeatingEstimate = 00:46:09.4507121, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:33.4486653, WeightEstimate = 03:19:50.8957533 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:22. coolingEstimate=02:06:38.4070944 [PrintingService.cs@1912] 08/08/2026 15:41:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.266747475661533;StartedAtUtc;00:23:50.5616656;09:18:48.1540274;08:54:57.5923618;False;408;0;0;00:00:00;03:19:50.8957533;03:19:50.8957533;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:49.7345553;00:00:00;02:06:38.4070944;00:23:50.5616656;00:46:09.4507121;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:33.4486653 [PrintingService.cs@1918] 08/08/2026 15:41:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1465, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:41:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1431.5475697, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.26972483280634, Elapsed = 00:23:51.5599172, TimeTotal = 09:18:48.1539972, Remaining = 08:54:56.5940800, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:50.8957533, WeightTotalEstimate = 03:19:50.8957533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:49.7345553, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:38.4070944, HeatingElapsed = 00:23:51.5599172, HeatingEstimate = 00:46:08.4524303, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:33.4486653, WeightEstimate = 03:19:50.8957533 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:22. coolingEstimate=02:06:38.4070944 [PrintingService.cs@1912] 08/08/2026 15:41:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.26972483280634;StartedAtUtc;00:23:51.5599172;09:18:48.1539972;08:54:56.5940800;False;408;0;0;00:00:00;03:19:50.8957533;03:19:50.8957533;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:49.7345553;00:00:00;02:06:38.4070944;00:23:51.5599172;00:46:08.4524303;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:33.4486653 [PrintingService.cs@1918] 08/08/2026 15:41:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=164.75 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 08/08/2026 15:41:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0700877 ~ 6.01 samples/sec, 28 resets, 2 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:41:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61 with temperature 57.25 [HeaterCheck.cs@67] 08/08/2026 15:41:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=142441, estimate=40.85420759502493 for layer 86, Z=8.601001 [PrintingService.cs@1524] 08/08/2026 15:41:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 75, island count 8 [PrintingService.cs@1569] 08/08/2026 15:41:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 87, start=0, count=408, Z=8.701 [PrintingService.cs@1518] 08/08/2026 15:41:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1456.5639893, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.343214707439387, Elapsed = 00:24:16.5763563, TimeTotal = 09:18:56.8259323, Remaining = 08:54:40.2495760, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:16.5763563, HeatingEstimate = 00:45:43.4360107, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.343214707439387;StartedAtUtc;00:24:16.5763563;09:18:56.8259323;08:54:40.2495760;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:16.5763563;00:45:43.4360107;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1713, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:41:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61 with temperature 57 [HeaterCheck.cs@67] 08/08/2026 15:41:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1457.5651193, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.34620406811039, Elapsed = 00:24:17.5789569, TimeTotal = 09:18:56.8274029, Remaining = 08:54:39.2484460, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:17.5789569, HeatingEstimate = 00:45:42.4348807, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.34620406811039;StartedAtUtc;00:24:17.5789569;09:18:56.8274029;08:54:39.2484460;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:17.5789569;00:45:42.4348807;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61 with temperature 56.25 [HeaterCheck.cs@67] 08/08/2026 15:41:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 08/08/2026 15:41:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1458.569407, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.3491943645227416, Elapsed = 00:24:18.5817421, TimeTotal = 09:18:56.8259004, Remaining = 08:54:38.2441583, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:18.5817421, HeatingEstimate = 00:45:41.4305930, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.3491943645227416;StartedAtUtc;00:24:18.5817421;09:18:56.8259004;08:54:38.2441583;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:18.5817421;00:45:41.4305930;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (66 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:41:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1459.5688866, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.352174668342848, Elapsed = 00:24:19.5812423, TimeTotal = 09:18:56.8259210, Remaining = 08:54:37.2446787, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:19.5812423, HeatingEstimate = 00:45:40.4311134, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.352174668342848;StartedAtUtc;00:24:19.5812423;09:18:56.8259210;08:54:37.2446787;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:19.5812423;00:45:40.4311134;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1460.5690346, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.355156858244711, Elapsed = 00:24:20.5813734, TimeTotal = 09:18:56.8259041, Remaining = 08:54:36.2445307, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:20.5813734, HeatingEstimate = 00:45:39.4309654, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.355156858244711;StartedAtUtc;00:24:20.5813734;09:18:56.8259041;08:54:36.2445307;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:20.5813734;00:45:39.4309654;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 61 with temperature 47.75 [HeaterCheck.cs@111] 08/08/2026 15:41:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1461.5719398, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.358147305778148, Elapsed = 00:24:21.5842744, TimeTotal = 09:18:56.8258999, Remaining = 08:54:35.2416255, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:21.5842744, HeatingEstimate = 00:45:38.4280602, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.358147305778148;StartedAtUtc;00:24:21.5842744;09:18:56.8258999;08:54:35.2416255;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:21.5842744;00:45:38.4280602;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 175 with temperature 170.2142791748047 [HeaterCheck.cs@67] 08/08/2026 15:41:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1462.5733846, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.361133432347022, Elapsed = 00:24:22.5857268, TimeTotal = 09:18:56.8259075, Remaining = 08:54:34.2401807, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:22.5857268, HeatingEstimate = 00:45:37.4266154, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.361133432347022;StartedAtUtc;00:24:22.5857268;09:18:56.8259075;08:54:34.2401807;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:22.5857268;00:45:37.4266154;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1463.5792818, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.364132814249418, Elapsed = 00:24:23.5916243, TimeTotal = 09:18:56.8259078, Remaining = 08:54:33.2342835, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:23.5916243, HeatingEstimate = 00:45:36.4207182, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.364132814249418;StartedAtUtc;00:24:23.5916243;09:18:56.8259078;08:54:33.2342835;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:23.5916243;00:45:36.4207182;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1464.5795547, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.367115949181818, Elapsed = 00:24:24.5920811, TimeTotal = 09:18:56.8260917, Remaining = 08:54:32.2340106, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:24.5920811, HeatingEstimate = 00:45:35.4204453, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.367115949181818;StartedAtUtc;00:24:24.5920811;09:18:56.8260917;08:54:32.2340106;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:24.5920811;00:45:35.4204453;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:41:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1465.5866545, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.370118391732268, Elapsed = 00:24:25.5989970, TimeTotal = 09:18:56.8259078, Remaining = 08:54:31.2269108, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:25.5989970, HeatingEstimate = 00:45:34.4133455, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:41:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.370118391732268;StartedAtUtc;00:24:25.5989970;09:18:56.8259078;08:54:31.2269108;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:25.5989970;00:45:34.4133455;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 172.75 [HeaterCheck.cs@67] 08/08/2026 15:42:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1466.590446, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.373111591812629, Elapsed = 00:24:26.6028228, TimeTotal = 09:18:56.8259421, Remaining = 08:54:30.2231193, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:26.6028228, HeatingEstimate = 00:45:33.4095540, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.373111591812629;StartedAtUtc;00:24:26.6028228;09:18:56.8259421;08:54:30.2231193;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:26.6028228;00:45:33.4095540;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1467.5929426, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.376100780494149, Elapsed = 00:24:27.6053010, TimeTotal = 09:18:56.8259237, Remaining = 08:54:29.2206227, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:27.6053010, HeatingEstimate = 00:45:32.4070574, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.376100780494149;StartedAtUtc;00:24:27.6053010;09:18:56.8259237;08:54:29.2206227;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:27.6053010;00:45:32.4070574;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1468.5964492, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.379092971954928, Elapsed = 00:24:28.6087861, TimeTotal = 09:18:56.8259022, Remaining = 08:54:28.2171161, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:28.6087861, HeatingEstimate = 00:45:31.4035508, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.379092971954928;StartedAtUtc;00:24:28.6087861;09:18:56.8259022;08:54:28.2171161;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:28.6087861;00:45:31.4035508;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1469.595944, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.382073262346496, Elapsed = 00:24:29.6082809, TimeTotal = 09:18:56.8259022, Remaining = 08:54:27.2176213, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:29.6082809, HeatingEstimate = 00:45:30.4040560, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.382073262346496;StartedAtUtc;00:24:29.6082809;09:18:56.8259022;08:54:27.2176213;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:29.6082809;00:45:30.4040560;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1470.5963839, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.385056368268275, Elapsed = 00:24:30.6087199, TimeTotal = 09:18:56.8259013, Remaining = 08:54:26.2171814, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:30.6087199, HeatingEstimate = 00:45:29.4036161, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.385056368268275;StartedAtUtc;00:24:30.6087199;09:18:56.8259013;08:54:26.2171814;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:30.6087199;00:45:29.4036161;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1471.5974392, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.388041306622104, Elapsed = 00:24:31.6097734, TimeTotal = 09:18:56.8258995, Remaining = 08:54:25.2161261, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:31.6097734, HeatingEstimate = 00:45:28.4025608, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.388041306622104;StartedAtUtc;00:24:31.6097734;09:18:56.8258995;08:54:25.2161261;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:31.6097734;00:45:28.4025608;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1472.5960908, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.391019085613719, Elapsed = 00:24:32.6084260, TimeTotal = 09:18:56.8259005, Remaining = 08:54:24.2174745, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:32.6084260, HeatingEstimate = 00:45:27.4039092, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.391019085613719;StartedAtUtc;00:24:32.6084260;09:18:56.8259005;08:54:24.2174745;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:32.6084260;00:45:27.4039092;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1473.595892, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.394000328398538, Elapsed = 00:24:33.6082408, TimeTotal = 09:18:56.8259141, Remaining = 08:54:23.2176733, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:33.6082408, HeatingEstimate = 00:45:26.4041080, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.394000328398538;StartedAtUtc;00:24:33.6082408;09:18:56.8259141;08:54:23.2176733;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:33.6082408;00:45:26.4041080;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1474.5976439, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.396987316219685, Elapsed = 00:24:34.6099812, TimeTotal = 09:18:56.8259026, Remaining = 08:54:22.2159214, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:34.6099812, HeatingEstimate = 00:45:25.4023561, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.396987316219685;StartedAtUtc;00:24:34.6099812;09:18:56.8259026;08:54:22.2159214;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:34.6099812;00:45:25.4023561;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1475.5956347, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.399963192683688, Elapsed = 00:24:35.6079968, TimeTotal = 09:18:56.8259274, Remaining = 08:54:21.2179306, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:35.6079968, HeatingEstimate = 00:45:24.4043653, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.399963192683688;StartedAtUtc;00:24:35.6079968;09:18:56.8259274;08:54:21.2179306;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:35.6079968;00:45:24.4043653;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1476.5983626, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.4029554141897504, Elapsed = 00:24:36.6115283, TimeTotal = 09:18:56.8267310, Remaining = 08:54:20.2152027, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:36.6115283, HeatingEstimate = 00:45:23.4016374, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.4029554141897504;StartedAtUtc;00:24:36.6115283;09:18:56.8267310;08:54:20.2152027;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:36.6115283;00:45:23.4016374;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1477.6052092, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.40595537082843, Elapsed = 00:24:37.6175837, TimeTotal = 09:18:56.8259398, Remaining = 08:54:19.2083561, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:37.6175837, HeatingEstimate = 00:45:22.3947908, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.40595537082843;StartedAtUtc;00:24:37.6175837;09:18:56.8259398;08:54:19.2083561;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:37.6175837;00:45:22.3947908;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1478.6072728, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.408949130685704, Elapsed = 00:24:38.6216856, TimeTotal = 09:18:56.8279781, Remaining = 08:54:18.2062925, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:38.6216856, HeatingEstimate = 00:45:21.3927272, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.408949130685704;StartedAtUtc;00:24:38.6216856;09:18:56.8279781;08:54:18.2062925;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:38.6216856;00:45:21.3927272;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1479.6118318, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.411938598220173, Elapsed = 00:24:39.6241665, TimeTotal = 09:18:56.8259000, Remaining = 08:54:17.2017335, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:39.6241665, HeatingEstimate = 00:45:20.3881682, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.411938598220173;StartedAtUtc;00:24:39.6241665;09:18:56.8259000;08:54:17.2017335;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:39.6241665;00:45:20.3881682;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1480.6116495, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.414919872240238, Elapsed = 00:24:40.6239915, TimeTotal = 09:18:56.8259073, Remaining = 08:54:16.2019158, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:40.6239915, HeatingEstimate = 00:45:19.3883505, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.414919872240238;StartedAtUtc;00:24:40.6239915;09:18:56.8259073;08:54:16.2019158;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:40.6239915;00:45:19.3883505;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1481.6153178, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.41791318230311, Elapsed = 00:24:41.6278616, TimeTotal = 09:18:56.8261091, Remaining = 08:54:15.1982475, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:41.6278616, HeatingEstimate = 00:45:18.3846822, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.41791318230311;StartedAtUtc;00:24:41.6278616;09:18:56.8261091;08:54:15.1982475;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:41.6278616;00:45:18.3846822;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1482.616024, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.420896605744172, Elapsed = 00:24:42.6283997, TimeTotal = 09:18:56.8259410, Remaining = 08:54:14.1975413, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:42.6283997, HeatingEstimate = 00:45:17.3839760, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.420896605744172;StartedAtUtc;00:24:42.6283997;09:18:56.8259410;08:54:14.1975413;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:42.6283997;00:45:17.3839760;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=181620, estimate=49.620238028251535 for layer 87, Z=8.701 [PrintingService.cs@1524] 08/08/2026 15:42:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 76, island count 8 [PrintingService.cs@1569] 08/08/2026 15:42:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 88, start=0, count=408, Z=8.801001 [PrintingService.cs@1518] 08/08/2026 15:42:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1632, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:42:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1483.6177108, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.423883888497538, Elapsed = 00:24:43.6302466, TimeTotal = 09:18:56.8261011, Remaining = 08:54:13.1958545, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:43.6302466, HeatingEstimate = 00:45:16.3822892, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.423883888497538;StartedAtUtc;00:24:43.6302466;09:18:56.8261011;08:54:13.1958545;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:43.6302466;00:45:16.3822892;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1484.6196978, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.426871048410473, Elapsed = 00:24:44.6320365, TimeTotal = 09:18:56.8259040, Remaining = 08:54:12.1938675, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:44.6320365, HeatingEstimate = 00:45:15.3803022, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.426871048410473;StartedAtUtc;00:24:44.6320365;09:18:56.8259040;08:54:12.1938675;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:44.6320365;00:45:15.3803022;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1485.621657, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.429858684292196, Elapsed = 00:24:45.6339947, TimeTotal = 09:18:56.8259030, Remaining = 08:54:11.1919083, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:45.6339947, HeatingEstimate = 00:45:14.3783430, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.429858684292196;StartedAtUtc;00:24:45.6339947;09:18:56.8259030;08:54:11.1919083;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:45.6339947;00:45:14.3783430;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1486.6187965, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.432831954792281, Elapsed = 00:24:46.6311353, TimeTotal = 09:18:56.8259041, Remaining = 08:54:10.1947688, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:46.6311353, HeatingEstimate = 00:45:13.3812035, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.432831954792281;StartedAtUtc;00:24:46.6311353;09:18:56.8259041;08:54:10.1947688;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:46.6311353;00:45:13.3812035;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1487.6202641, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.435818121118479, Elapsed = 00:24:47.6326006, TimeTotal = 09:18:56.8259018, Remaining = 08:54:09.1933012, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:47.6326006, HeatingEstimate = 00:45:12.3797359, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.435818121118479;StartedAtUtc;00:24:47.6326006;09:18:56.8259018;08:54:09.1933012;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:47.6326006;00:45:12.3797359;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1488.619717, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.4387984090987525, Elapsed = 00:24:48.6320965, TimeTotal = 09:18:56.8259448, Remaining = 08:54:08.1938483, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:48.6320965, HeatingEstimate = 00:45:11.3802830, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.4387984090987525;StartedAtUtc;00:24:48.6320965;09:18:56.8259448;08:54:08.1938483;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:48.6320965;00:45:11.3802830;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1489.6208327, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.441783414717788, Elapsed = 00:24:49.6331708, TimeTotal = 09:18:56.8259034, Remaining = 08:54:07.1927326, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:49.6331708, HeatingEstimate = 00:45:10.3791673, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.441783414717788;StartedAtUtc;00:24:49.6331708;09:18:56.8259034;08:54:07.1927326;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:49.6331708;00:45:10.3791673;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1490.6189761, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.444759686906112, Elapsed = 00:24:50.6313182, TimeTotal = 09:18:56.8259074, Remaining = 08:54:06.1945892, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:50.6313182, HeatingEstimate = 00:45:09.3810239, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.444759686906112;StartedAtUtc;00:24:50.6313182;09:18:56.8259074;08:54:06.1945892;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:50.6313182;00:45:09.3810239;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1491.6187316, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.447740743539862, Elapsed = 00:24:51.6310698, TimeTotal = 09:18:56.8259035, Remaining = 08:54:05.1948337, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:51.6310698, HeatingEstimate = 00:45:08.3812684, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.447740743539862;StartedAtUtc;00:24:51.6310698;09:18:56.8259035;08:54:05.1948337;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:51.6310698;00:45:08.3812684;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1492.620869, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.450728936990023, Elapsed = 00:24:52.6332154, TimeTotal = 09:18:56.8259117, Remaining = 08:54:04.1926963, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:52.6332154, HeatingEstimate = 00:45:07.3791310, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.450728936990023;StartedAtUtc;00:24:52.6332154;09:18:56.8259117;08:54:04.1926963;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:52.6332154;00:45:07.3791310;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1493.6276094, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.453730826874509, Elapsed = 00:24:53.6399539, TimeTotal = 09:18:56.8259098, Remaining = 08:54:03.1859559, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:53.6399539, HeatingEstimate = 00:45:06.3723906, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.453730826874509;StartedAtUtc;00:24:53.6399539;09:18:56.8259098;08:54:03.1859559;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:53.6399539;00:45:06.3723906;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1494.6276928, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.4567129301838, Elapsed = 00:24:54.6400576, TimeTotal = 09:18:56.8259301, Remaining = 08:54:02.1858725, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:54.6400576, HeatingEstimate = 00:45:05.3723072, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.4567129301838;StartedAtUtc;00:24:54.6400576;09:18:56.8259301;08:54:02.1858725;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:54.6400576;00:45:05.3723072;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61 with temperature 56 [HeaterCheck.cs@67] 08/08/2026 15:42:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1495.6298331, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.459701033137756, Elapsed = 00:24:55.6421713, TimeTotal = 09:18:56.8259035, Remaining = 08:54:01.1837322, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:55.6421713, HeatingEstimate = 00:45:04.3701669, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.459701033137756;StartedAtUtc;00:24:55.6421713;09:18:56.8259035;08:54:01.1837322;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:55.6421713;00:45:04.3701669;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1496.6277124, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.462677106378777, Elapsed = 00:24:56.6402612, TimeTotal = 09:18:56.8261141, Remaining = 08:54:00.1858529, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:56.6402612, HeatingEstimate = 00:45:03.3722876, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.462677106378777;StartedAtUtc;00:24:56.6402612;09:18:56.8261141;08:54:00.1858529;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:56.6402612;00:45:03.3722876;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1497.6270681, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.465656370950307, Elapsed = 00:24:57.6394024, TimeTotal = 09:18:56.8258996, Remaining = 08:53:59.1864972, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:57.6394024, HeatingEstimate = 00:45:02.3729319, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.465656370950307;StartedAtUtc;00:24:57.6394024;09:18:56.8258996;08:53:59.1864972;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:57.6394024;00:45:02.3729319;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1498.6307604, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.46865054815676, Elapsed = 00:24:58.6435759, TimeTotal = 09:18:56.8263808, Remaining = 08:53:58.1828049, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:58.6435759, HeatingEstimate = 00:45:01.3692396, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.46865054815676;StartedAtUtc;00:24:58.6435759;09:18:56.8263808;08:53:58.1828049;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:58.6435759;00:45:01.3692396;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1499.6343725, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.471641844474053, Elapsed = 00:24:59.6467418, TimeTotal = 09:18:56.8259346, Remaining = 08:53:57.1791928, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:24:59.6467418, HeatingEstimate = 00:45:00.3656275, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.471641844474053;StartedAtUtc;00:24:59.6467418;09:18:56.8259346;08:53:57.1791928;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:24:59.6467418;00:45:00.3656275;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1500.6378117, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.474636075551608, Elapsed = 00:25:00.6509461, TimeTotal = 09:18:56.8266997, Remaining = 08:53:56.1757536, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:00.6509461, HeatingEstimate = 00:44:59.3621883, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.474636075551608;StartedAtUtc;00:25:00.6509461;09:18:56.8266997;08:53:56.1757536;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:00.6509461;00:44:59.3621883;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1501.63985, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.477621687396141, Elapsed = 00:25:01.6521900, TimeTotal = 09:18:56.8259053, Remaining = 08:53:55.1737153, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:01.6521900, HeatingEstimate = 00:44:58.3601500, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.477621687396141;StartedAtUtc;00:25:01.6521900;09:18:56.8259053;08:53:55.1737153;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:01.6521900;00:44:58.3601500;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=62,powderChamber1=62,powderChamber2=62,powderChamber3=62,powderChamber4=62 [ControlledHeating.cs@169] 08/08/2026 15:42:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1502.6400253, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.480604000064486, Elapsed = 00:25:02.6523629, TimeTotal = 09:18:56.8259029, Remaining = 08:53:54.1735400, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:02.6523629, HeatingEstimate = 00:44:57.3599747, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.480604000064486;StartedAtUtc;00:25:02.6523629;09:18:56.8259029;08:53:54.1735400;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:02.6523629;00:44:57.3599747;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1503.645891, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.483603388862537, Elapsed = 00:25:03.6582643, TimeTotal = 09:18:56.8259386, Remaining = 08:53:53.1676743, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:03.6582643, HeatingEstimate = 00:44:56.3541090, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.483603388862537;StartedAtUtc;00:25:03.6582643;09:18:56.8259386;08:53:53.1676743;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:03.6582643;00:44:56.3541090;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1504.6441639, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.486579952346498, Elapsed = 00:25:04.6565079, TimeTotal = 09:18:56.8259093, Remaining = 08:53:52.1694014, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:04.6565079, HeatingEstimate = 00:44:55.3558361, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.486579952346498;StartedAtUtc;00:25:04.6565079;09:18:56.8259093;08:53:52.1694014;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:04.6565079;00:44:55.3558361;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0781744 ~ 6.01 samples/sec, 28 resets, 2 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:42:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1505.6497006, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.489578243076684, Elapsed = 00:25:05.6620392, TimeTotal = 09:18:56.8259039, Remaining = 08:53:51.1638647, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:05.6620392, HeatingEstimate = 00:44:54.3502994, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.489578243076684;StartedAtUtc;00:25:05.6620392;09:18:56.8259039;08:53:51.1638647;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:05.6620392;00:44:54.3502994;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1506.6495145, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.4925600437052315, Elapsed = 00:25:06.6620493, TimeTotal = 09:18:56.8261001, Remaining = 08:53:50.1640508, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:06.6620493, HeatingEstimate = 00:44:53.3504855, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.4925600437052315;StartedAtUtc;00:25:06.6620493;09:18:56.8261001;08:53:50.1640508;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:06.6620493;00:44:53.3504855;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1507.6499912, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.495542742760857, Elapsed = 00:25:07.6623437, TimeTotal = 09:18:56.8259178, Remaining = 08:53:49.1635741, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:07.6623437, HeatingEstimate = 00:44:52.3500088, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.495542742760857;StartedAtUtc;00:25:07.6623437;09:18:56.8259178;08:53:49.1635741;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:07.6623437;00:44:52.3500088;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1508.6516483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.498530000957686, Elapsed = 00:25:08.6641835, TimeTotal = 09:18:56.8261005, Remaining = 08:53:48.1619170, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:08.6641835, HeatingEstimate = 00:44:51.3483517, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.498530000957686;StartedAtUtc;00:25:08.6641835;09:18:56.8261005;08:53:48.1619170;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:08.6641835;00:44:51.3483517;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=51 that are outside of set tolerance 10 for current step target 62 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:42:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1509.6521109, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.501513412893414, Elapsed = 00:25:09.6647289, TimeTotal = 09:18:56.8261833, Remaining = 08:53:47.1614544, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:09.6647289, HeatingEstimate = 00:44:50.3478891, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.501513412893414;StartedAtUtc;00:25:09.6647289;09:18:56.8261833;08:53:47.1614544;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:09.6647289;00:44:50.3478891;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=143349, estimate=40.755955165676845 for layer 88, Z=8.801001 [PrintingService.cs@1524] 08/08/2026 15:42:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 77, island count 8 [PrintingService.cs@1569] 08/08/2026 15:42:44 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 89, start=0, count=408, Z=8.901001 [PrintingService.cs@1518] 08/08/2026 15:42:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1769, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:42:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1510.6523446, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.504495111207945, Elapsed = 00:25:10.6646833, TimeTotal = 09:18:56.8259040, Remaining = 08:53:46.1612207, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:10.6646833, HeatingEstimate = 00:44:49.3476554, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.504495111207945;StartedAtUtc;00:25:10.6646833;09:18:56.8259040;08:53:46.1612207;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:10.6646833;00:44:49.3476554;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1511.6512477, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.507473627873793, Elapsed = 00:25:11.6635831, TimeTotal = 09:18:56.8259007, Remaining = 08:53:45.1623176, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:11.6635831, HeatingEstimate = 00:44:48.3487523, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.507473627873793;StartedAtUtc;00:25:11.6635831;09:18:56.8259007;08:53:45.1623176;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:11.6635831;00:44:48.3487523;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1512.6523242, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.510458632010911, Elapsed = 00:25:12.6646587, TimeTotal = 09:18:56.8258998, Remaining = 08:53:44.1612411, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:12.6646587, HeatingEstimate = 00:44:47.3476758, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.510458632010911;StartedAtUtc;00:25:12.6646587;09:18:56.8258998;08:53:44.1612411;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:12.6646587;00:44:47.3476758;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1513.6524306, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.513440744930726, Elapsed = 00:25:13.6647647, TimeTotal = 09:18:56.8258994, Remaining = 08:53:43.1611347, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:13.6647647, HeatingEstimate = 00:44:46.3475694, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.513440744930726;StartedAtUtc;00:25:13.6647647;09:18:56.8258994;08:53:43.1611347;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:13.6647647;00:44:46.3475694;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1514.6514076, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.516420254378016, Elapsed = 00:25:14.6640097, TimeTotal = 09:18:56.8261674, Remaining = 08:53:42.1621577, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:14.6640097, HeatingEstimate = 00:44:45.3485924, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.516420254378016;StartedAtUtc;00:25:14.6640097;09:18:56.8261674;08:53:42.1621577;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:14.6640097;00:44:45.3485924;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1515.6519296, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.519402865709723, Elapsed = 00:25:15.6642711, TimeTotal = 09:18:56.8259068, Remaining = 08:53:41.1616357, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:15.6642711, HeatingEstimate = 00:44:44.3480704, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.519402865709723;StartedAtUtc;00:25:15.6642711;09:18:56.8259068;08:53:41.1616357;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:15.6642711;00:44:44.3480704;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1516.6518201, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.522384345108109, Elapsed = 00:25:16.6641648, TimeTotal = 09:18:56.8259100, Remaining = 08:53:40.1617452, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:16.6641648, HeatingEstimate = 00:44:43.3481799, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.522384345108109;StartedAtUtc;00:25:16.6641648;09:18:56.8259100;08:53:40.1617452;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:16.6641648;00:44:43.3481799;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1517.6628285, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.525399479433787, Elapsed = 00:25:17.6753533, TimeTotal = 09:18:56.8260901, Remaining = 08:53:39.1507368, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:17.6753533, HeatingEstimate = 00:44:42.3371715, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.525399479433787;StartedAtUtc;00:25:17.6753533;09:18:56.8260901;08:53:39.1507368;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:17.6753533;00:44:42.3371715;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1518.6654781, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.528389287805141, Elapsed = 00:25:18.6780419, TimeTotal = 09:18:56.8261291, Remaining = 08:53:38.1480872, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:18.6780419, HeatingEstimate = 00:44:41.3345219, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.528389287805141;StartedAtUtc;00:25:18.6780419;09:18:56.8261291;08:53:38.1480872;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:18.6780419;00:44:41.3345219;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1519.6706681, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.531385988492184, Elapsed = 00:25:19.6830311, TimeTotal = 09:18:56.8259283, Remaining = 08:53:37.1428972, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:19.6830311, HeatingEstimate = 00:44:40.3293319, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.531385988492184;StartedAtUtc;00:25:19.6830311;09:18:56.8259283;08:53:37.1428972;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:19.6830311;00:44:40.3293319;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1520.6740638, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.534379148839549, Elapsed = 00:25:20.6868618, TimeTotal = 09:18:56.8263633, Remaining = 08:53:36.1395015, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:20.6868618, HeatingEstimate = 00:44:39.3259362, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.534379148839549;StartedAtUtc;00:25:20.6868618;09:18:56.8263633;08:53:36.1395015;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:20.6868618;00:44:39.3259362;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1521.6771425, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.537368818253325, Elapsed = 00:25:21.6894812, TimeTotal = 09:18:56.8259040, Remaining = 08:53:35.1364228, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:21.6894812, HeatingEstimate = 00:44:38.3228575, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.537368818253325;StartedAtUtc;00:25:21.6894812;09:18:56.8259040;08:53:35.1364228;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:21.6894812;00:44:38.3228575;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1522.6810888, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.54036241029265, Elapsed = 00:25:22.6934374, TimeTotal = 09:18:56.8259139, Remaining = 08:53:34.1324765, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:22.6934374, HeatingEstimate = 00:44:37.3189112, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.54036241029265;StartedAtUtc;00:25:22.6934374;09:18:56.8259139;08:53:34.1324765;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:22.6934374;00:44:37.3189112;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1523.6840778, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.543353160949223, Elapsed = 00:25:23.6964409, TimeTotal = 09:18:56.8259284, Remaining = 08:53:33.1294875, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:23.6964409, HeatingEstimate = 00:44:36.3159222, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.543353160949223;StartedAtUtc;00:25:23.6964409;09:18:56.8259284;08:53:33.1294875;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:23.6964409;00:44:36.3159222;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 62 with temperature 51.5 [HeaterCheck.cs@111] 08/08/2026 15:42:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1524.6852624, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.5463386977537805, Elapsed = 00:25:24.6976985, TimeTotal = 09:18:56.8260014, Remaining = 08:53:32.1283029, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:24.6976985, HeatingEstimate = 00:44:35.3147376, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.5463386977537805;StartedAtUtc;00:25:24.6976985;09:18:56.8260014;08:53:32.1283029;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:24.6976985;00:44:35.3147376;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:42:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1525.6846757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.549318746827781, Elapsed = 00:25:25.6971124, TimeTotal = 09:18:56.8260020, Remaining = 08:53:31.1288896, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:25.6971124, HeatingEstimate = 00:44:34.3153243, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:42:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.549318746827781;StartedAtUtc;00:25:25.6971124;09:18:56.8260020;08:53:31.1288896;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:25.6971124;00:44:34.3153243;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1526.684657, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.552300309976089, Elapsed = 00:25:26.6970312, TimeTotal = 09:18:56.8259395, Remaining = 08:53:30.1289083, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:26.6970312, HeatingEstimate = 00:44:33.3153430, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.552300309976089;StartedAtUtc;00:25:26.6970312;09:18:56.8259395;08:53:30.1289083;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:26.6970312;00:44:33.3153430;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=63,powderChamber1=63,powderChamber2=63,powderChamber3=63,powderChamber4=63 [ControlledHeating.cs@169] 08/08/2026 15:43:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1527.6865775, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.555287717762545, Elapsed = 00:25:27.6989111, TimeTotal = 09:18:56.8258989, Remaining = 08:53:29.1269878, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:27.6989111, HeatingEstimate = 00:44:32.3134225, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.555287717762545;StartedAtUtc;00:25:27.6989111;09:18:56.8258989;08:53:29.1269878;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:27.6989111;00:44:32.3134225;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1528.6878189, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.558273229820905, Elapsed = 00:25:28.7001573, TimeTotal = 09:18:56.8259037, Remaining = 08:53:28.1257464, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:28.7001573, HeatingEstimate = 00:44:31.3121811, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.558273229820905;StartedAtUtc;00:25:28.7001573;09:18:56.8259037;08:53:28.1257464;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:28.7001573;00:44:31.3121811;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1529.687964, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.561255451591164, Elapsed = 00:25:29.7002997, TimeTotal = 09:18:56.8259010, Remaining = 08:53:27.1256013, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:29.7002997, HeatingEstimate = 00:44:30.3120360, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.561255451591164;StartedAtUtc;00:25:29.7002997;09:18:56.8259010;08:53:27.1256013;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:29.7002997;00:44:30.3120360;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1530.6882739, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.5642381735836866, Elapsed = 00:25:30.7006100, TimeTotal = 09:18:56.8259014, Remaining = 08:53:26.1252914, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:30.7006100, HeatingEstimate = 00:44:29.3117261, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.5642381735836866;StartedAtUtc;00:25:30.7006100;09:18:56.8259014;08:53:26.1252914;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:30.7006100;00:44:29.3117261;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1531.6881726, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.567219672591468, Elapsed = 00:25:31.7005102, TimeTotal = 09:18:56.8259029, Remaining = 08:53:25.1253927, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:31.7005102, HeatingEstimate = 00:44:28.3118274, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.567219672591468;StartedAtUtc;00:25:31.7005102;09:18:56.8259029;08:53:25.1253927;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:31.7005102;00:44:28.3118274;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1532.6866654, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.570196971807957, Elapsed = 00:25:32.6990018, TimeTotal = 09:18:56.8259017, Remaining = 08:53:24.1268999, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:32.6990018, HeatingEstimate = 00:44:27.3133346, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.570196971807957;StartedAtUtc;00:25:32.6990018;09:18:56.8259017;08:53:24.1268999;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:32.6990018;00:44:27.3133346;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1533.6922021, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.573199657039436, Elapsed = 00:25:33.7060775, TimeTotal = 09:18:56.8274407, Remaining = 08:53:23.1213632, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:33.7060775, HeatingEstimate = 00:44:26.3077979, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.573199657039436;StartedAtUtc;00:25:33.7060775;09:18:56.8274407;08:53:23.1213632;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:33.7060775;00:44:26.3077979;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1534.6938363, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.576182731457664, Elapsed = 00:25:34.7064482, TimeTotal = 09:18:56.8261772, Remaining = 08:53:22.1197290, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:34.7064482, HeatingEstimate = 00:44:25.3061637, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.576182731457664;StartedAtUtc;00:25:34.7064482;09:18:56.8261772;08:53:22.1197290;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:34.7064482;00:44:25.3061637;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:09 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=52 that are outside of set tolerance 10 for current step target 63 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:43:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1535.6978647, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.579175778992907, Elapsed = 00:25:35.7102091, TimeTotal = 09:18:56.8259097, Remaining = 08:53:21.1157006, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:35.7102091, HeatingEstimate = 00:44:24.3021353, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.579175778992907;StartedAtUtc;00:25:35.7102091;09:18:56.8259097;08:53:21.1157006;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:35.7102091;00:44:24.3021353;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=64,powderChamber1=64,powderChamber2=64,powderChamber3=64,powderChamber4=64 [ControlledHeating.cs@169] 08/08/2026 15:43:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1536.6966107, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.582153812999488, Elapsed = 00:25:36.7089468, TimeTotal = 09:18:56.8259014, Remaining = 08:53:20.1169546, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:36.7089468, HeatingEstimate = 00:44:23.3033893, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.582153812999488;StartedAtUtc;00:25:36.7089468;09:18:56.8259014;08:53:20.1169546;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:36.7089468;00:44:23.3033893;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1537.6964327, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.585135081595608, Elapsed = 00:25:37.7087697, TimeTotal = 09:18:56.8259023, Remaining = 08:53:19.1171326, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:37.7087697, HeatingEstimate = 00:44:22.3035673, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.585135081595608;StartedAtUtc;00:25:37.7087697;09:18:56.8259023;08:53:19.1171326;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:37.7087697;00:44:22.3035673;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (186 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:43:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1538.6963301, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.5881165679065745, Elapsed = 00:25:38.7086655, TimeTotal = 09:18:56.8259007, Remaining = 08:53:18.1172352, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.3193945, WeightTotalEstimate = 03:19:57.3193945, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.1581965, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.6553688, HeatingElapsed = 00:25:38.7086655, HeatingEstimate = 00:44:21.3036699, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:39.8723065, WeightEstimate = 03:19:57.3193945 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.6553688 [PrintingService.cs@1912] 08/08/2026 15:43:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.5881165679065745;StartedAtUtc;00:25:38.7086655;09:18:56.8259007;08:53:18.1172352;False;408;0;0;00:00:00;03:19:57.3193945;03:19:57.3193945;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.1581965;00:00:00;02:06:40.6553688;00:25:38.7086655;00:44:21.3036699;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:39.8723065 [PrintingService.cs@1918] 08/08/2026 15:43:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=183289, estimate=50.18443465494588 for layer 89, Z=8.901001 [PrintingService.cs@1524] 08/08/2026 15:43:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 78, island count 8 [PrintingService.cs@1569] 08/08/2026 15:43:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 90, start=0, count=408, Z=9.001 [PrintingService.cs@1518] 08/08/2026 15:43:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1938, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:43:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1539.6961131, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.591053565367004, Elapsed = 00:25:39.7084492, TimeTotal = 09:18:57.1484405, Remaining = 08:53:17.4399913, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:39.7084492, HeatingEstimate = 00:44:20.3038869, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.591053565367004;StartedAtUtc;00:25:39.7084492;09:18:57.1484405;08:53:17.4399913;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:39.7084492;00:44:20.3038869;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1540.6957755, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.594034325133559, Elapsed = 00:25:40.7081110, TimeTotal = 09:18:57.1484399, Remaining = 08:53:16.4403289, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:40.7081110, HeatingEstimate = 00:44:19.3042245, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.594034325133559;StartedAtUtc;00:25:40.7081110;09:18:57.1484399;08:53:16.4403289;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:40.7081110;00:44:19.3042245;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1541.6951054, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.597014357450092, Elapsed = 00:25:41.7075331, TimeTotal = 09:18:57.1485321, Remaining = 08:53:15.4409990, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:41.7075331, HeatingEstimate = 00:44:18.3048946, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.597014357450092;StartedAtUtc;00:25:41.7075331;09:18:57.1485321;08:53:15.4409990;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:41.7075331;00:44:18.3048946;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1542.6968374, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.600001493372039, Elapsed = 00:25:42.7093366, TimeTotal = 09:18:57.1486036, Remaining = 08:53:14.4392670, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:42.7093366, HeatingEstimate = 00:44:17.3031626, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.600001493372039;StartedAtUtc;00:25:42.7093366;09:18:57.1486036;08:53:14.4392670;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:42.7093366;00:44:17.3031626;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:17 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=53 that are outside of set tolerance 10 for current step target 64 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:43:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1543.6948482, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.602976883837893, Elapsed = 00:25:43.7071905, TimeTotal = 09:18:57.1484467, Remaining = 08:53:13.4412562, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:43.7071905, HeatingEstimate = 00:44:16.3051518, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.602976883837893;StartedAtUtc;00:25:43.7071905;09:18:57.1484467;08:53:13.4412562;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:43.7071905;00:44:16.3051518;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1544.6950899, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.605959385448969, Elapsed = 00:25:44.7074367, TimeTotal = 09:18:57.1484512, Remaining = 08:53:12.4410145, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:44.7074367, HeatingEstimate = 00:44:15.3049101, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.605959385448969;StartedAtUtc;00:25:44.7074367;09:18:57.1484512;08:53:12.4410145;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:44.7074367;00:44:15.3049101;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=65,powderChamber1=65,powderChamber2=65,powderChamber3=65,powderChamber4=65 [ControlledHeating.cs@169] 08/08/2026 15:43:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1545.6947041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.608939976747856, Elapsed = 00:25:45.7070416, TimeTotal = 09:18:57.1484419, Remaining = 08:53:11.4414003, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:45.7070416, HeatingEstimate = 00:44:14.3052959, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.608939976747856;StartedAtUtc;00:25:45.7070416;09:18:57.1484419;08:53:11.4414003;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:45.7070416;00:44:14.3052959;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1546.6954943, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.611924098499416, Elapsed = 00:25:46.7078309, TimeTotal = 09:18:57.1484410, Remaining = 08:53:10.4406101, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:46.7078309, HeatingEstimate = 00:44:13.3045057, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.611924098499416;StartedAtUtc;00:25:46.7078309;09:18:57.1484410;08:53:10.4406101;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:46.7078309;00:44:13.3045057;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1547.6956123, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.614906974160273, Elapsed = 00:25:47.7082146, TimeTotal = 09:18:57.1487067, Remaining = 08:53:09.4404921, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:47.7082146, HeatingEstimate = 00:44:12.3043877, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.614906974160273;StartedAtUtc;00:25:47.7082146;09:18:57.1487067;08:53:09.4404921;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:47.7082146;00:44:12.3043877;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60 [HeaterCheck.cs@67] 08/08/2026 15:43:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1548.6997927, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.617900445026723, Elapsed = 00:25:48.7121270, TimeTotal = 09:18:57.1484387, Remaining = 08:53:08.4363117, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:48.7121270, HeatingEstimate = 00:44:11.3002073, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.617900445026723;StartedAtUtc;00:25:48.7121270;09:18:57.1484387;08:53:08.4363117;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:48.7121270;00:44:11.3002073;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.25 [HeaterCheck.cs@67] 08/08/2026 15:43:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1549.7012011, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.620886566811376, Elapsed = 00:25:49.7135896, TimeTotal = 09:18:57.1484929, Remaining = 08:53:07.4349033, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:49.7135896, HeatingEstimate = 00:44:10.2987989, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.620886566811376;StartedAtUtc;00:25:49.7135896;09:18:57.1484929;08:53:07.4349033;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:49.7135896;00:44:10.2987989;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.25 [HeaterCheck.cs@67] 08/08/2026 15:43:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1550.7098187, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.623893904909828, Elapsed = 00:25:50.7221630, TimeTotal = 09:18:57.1484487, Remaining = 08:53:06.4262857, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:50.7221630, HeatingEstimate = 00:44:09.2901813, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.623893904909828;StartedAtUtc;00:25:50.7221630;09:18:57.1484487;08:53:06.4262857;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:50.7221630;00:44:09.2901813;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1551.7147932, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.626891713312518, Elapsed = 00:25:51.7275621, TimeTotal = 09:18:57.1488733, Remaining = 08:53:05.4213112, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:51.7275621, HeatingEstimate = 00:44:08.2852068, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.626891713312518;StartedAtUtc;00:25:51.7275621;09:18:57.1488733;08:53:05.4213112;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:51.7275621;00:44:08.2852068;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1552.7178622, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.629884105198964, Elapsed = 00:25:52.7311490, TimeTotal = 09:18:57.1493912, Remaining = 08:53:04.4182422, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:52.7311490, HeatingEstimate = 00:44:07.2821378, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.629884105198964;StartedAtUtc;00:25:52.7311490;09:18:57.1493912;08:53:04.4182422;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:52.7311490;00:44:07.2821378;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:27 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=54 that are outside of set tolerance 10 for current step target 65 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:43:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.25 [HeaterCheck.cs@67] 08/08/2026 15:43:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1553.7204316, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.632871376559374, Elapsed = 00:25:53.7329595, TimeTotal = 09:18:57.1486323, Remaining = 08:53:03.4156728, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:53.7329595, HeatingEstimate = 00:44:06.2795684, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.632871376559374;StartedAtUtc;00:25:53.7329595;09:18:57.1486323;08:53:03.4156728;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:53.7329595;00:44:06.2795684;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1554.7187368, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.635847587285173, Elapsed = 00:25:54.7310875, TimeTotal = 09:18:57.1484551, Remaining = 08:53:02.4173676, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:54.7310875, HeatingEstimate = 00:44:05.2812632, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.635847587285173;StartedAtUtc;00:25:54.7310875;09:18:57.1484551;08:53:02.4173676;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:54.7310875;00:44:05.2812632;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1555.7198033, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.638832507023425, Elapsed = 00:25:55.7321440, TimeTotal = 09:18:57.1484451, Remaining = 08:53:01.4163011, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:55.7321440, HeatingEstimate = 00:44:04.2801967, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.638832507023425;StartedAtUtc;00:25:55.7321440;09:18:57.1484451;08:53:01.4163011;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:55.7321440;00:44:04.2801967;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1556.7190785, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.6418235684303895, Elapsed = 00:25:56.7354477, TimeTotal = 09:18:57.1524736, Remaining = 08:53:00.4170259, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:56.7354477, HeatingEstimate = 00:44:03.2809215, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.6418235684303895;StartedAtUtc;00:25:56.7354477;09:18:57.1524736;08:53:00.4170259;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:56.7354477;00:44:03.2809215;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1557.7267942, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.644816889070682, Elapsed = 00:25:57.7391351, TimeTotal = 09:18:57.1484453, Remaining = 08:52:59.4093102, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:57.7391351, HeatingEstimate = 00:44:02.2732058, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.644816889070682;StartedAtUtc;00:25:57.7391351;09:18:57.1484453;08:52:59.4093102;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:57.7391351;00:44:02.2732058;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.75 [HeaterCheck.cs@67] 08/08/2026 15:43:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1558.7302475, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.6478091366606735, Elapsed = 00:25:58.7426526, TimeTotal = 09:18:57.1485095, Remaining = 08:52:58.4058569, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:58.7426526, HeatingEstimate = 00:44:01.2697525, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.6478091366606735;StartedAtUtc;00:25:58.7426526;09:18:57.1485095;08:52:58.4058569;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:58.7426526;00:44:01.2697525;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1559.7311251, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.650794969843739, Elapsed = 00:25:59.7440396, TimeTotal = 09:18:57.1490189, Remaining = 08:52:57.4049793, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:25:59.7440396, HeatingEstimate = 00:44:00.2688749, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.650794969843739;StartedAtUtc;00:25:59.7440396;09:18:57.1490189;08:52:57.4049793;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:25:59.7440396;00:44:00.2688749;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1560.7315857, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.653776520937012, Elapsed = 00:26:00.7439408, TimeTotal = 09:18:57.1484595, Remaining = 08:52:56.4045187, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:26:00.7439408, HeatingEstimate = 00:43:59.2684143, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.653776520937012;StartedAtUtc;00:26:00.7439408;09:18:57.1484595;08:52:56.4045187;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:26:00.7439408;00:43:59.2684143;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.25 [HeaterCheck.cs@67] 08/08/2026 15:43:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1561.7336129, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.656764272855628, Elapsed = 00:26:01.7459466, TimeTotal = 09:18:57.1484381, Remaining = 08:52:55.4024915, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:19:57.5583124, WeightTotalEstimate = 03:19:57.5583124, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:01:56.3971144, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:40.7389900, HeatingElapsed = 00:26:01.7459466, HeatingEstimate = 00:43:58.2663871, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:40.1112244, WeightEstimate = 03:19:57.5583124 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:31. coolingEstimate=02:06:40.7389900 [PrintingService.cs@1912] 08/08/2026 15:43:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.656764272855628;StartedAtUtc;00:26:01.7459466;09:18:57.1484381;08:52:55.4024915;False;408;0;0;00:00:00;03:19:57.5583124;03:19:57.5583124;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:01:56.3971144;00:00:00;02:06:40.7389900;00:26:01.7459466;00:43:58.2663871;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:40.1112244 [PrintingService.cs@1918] 08/08/2026 15:43:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=144288, estimate=41.02783728007343 for layer 90, Z=9.001 [PrintingService.cs@1524] 08/08/2026 15:43:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 79, island count 8 [PrintingService.cs@1569] 08/08/2026 15:43:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 91, start=0, count=408, Z=9.101001 [PrintingService.cs@1518] 08/08/2026 15:43:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1808, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:43:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1562.731766, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.657481826190059, Elapsed = 00:26:02.7440991, TimeTotal = 09:19:13.4127114, Remaining = 08:53:10.6686123, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:02.7440991, HeatingEstimate = 00:43:57.2682340, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.657481826190059;StartedAtUtc;00:26:02.7440991;09:19:13.4127114;08:53:10.6686123;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:02.7440991;00:43:57.2682340;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1563.7319246, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.660462650340186, Elapsed = 00:26:03.7442678, TimeTotal = 09:19:13.4127215, Remaining = 08:53:09.6684537, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:03.7442678, HeatingEstimate = 00:43:56.2680754, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.660462650340186;StartedAtUtc;00:26:03.7442678;09:19:13.4127215;08:53:09.6684537;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:03.7442678;00:43:56.2680754;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1564.7323404, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.663444211193496, Elapsed = 00:26:04.7446832, TimeTotal = 09:19:13.4127211, Remaining = 08:53:08.6680379, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:04.7446832, HeatingEstimate = 00:43:55.2676596, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.663444211193496;StartedAtUtc;00:26:04.7446832;09:19:13.4127211;08:53:08.6680379;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:04.7446832;00:43:55.2676596;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0309194 ~ 6.01 samples/sec, 28 resets, 2 ignored frames) [Mlx90640Camera.cs@313] 08/08/2026 15:43:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1565.7331802, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.6664270303053605, Elapsed = 00:26:05.7455207, TimeTotal = 09:19:13.4127188, Remaining = 08:53:07.6671981, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:05.7455207, HeatingEstimate = 00:43:54.2668198, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.6664270303053605;StartedAtUtc;00:26:05.7455207;09:19:13.4127188;08:53:07.6671981;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:05.7455207;00:43:54.2668198;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.25 [HeaterCheck.cs@67] 08/08/2026 15:43:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1566.7340874, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.669410143197298, Elapsed = 00:26:06.7464583, TimeTotal = 09:19:13.4127492, Remaining = 08:53:06.6662909, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:06.7464583, HeatingEstimate = 00:43:53.2659126, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.669410143197298;StartedAtUtc;00:26:06.7464583;09:19:13.4127492;08:53:06.6662909;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:06.7464583;00:43:53.2659126;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 65 with temperature 60.25 [HeaterCheck.cs@67] 08/08/2026 15:43:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1567.7361895, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.672396633170149, Elapsed = 00:26:07.7485260, TimeTotal = 09:19:13.4127148, Remaining = 08:53:05.6641888, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:07.7485260, HeatingEstimate = 00:43:52.2638105, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.672396633170149;StartedAtUtc;00:26:07.7485260;09:19:13.4127148;08:53:05.6641888;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:07.7485260;00:43:52.2638105;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1568.7366846, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.675378430931989, Elapsed = 00:26:08.7490209, TimeTotal = 09:19:13.4127146, Remaining = 08:53:04.6636937, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:08.7490209, HeatingEstimate = 00:43:51.2633154, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.675378430931989;StartedAtUtc;00:26:08.7490209;09:19:13.4127146;08:53:04.6636937;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:08.7490209;00:43:51.2633154;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1569.73899, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.678365966583798, Elapsed = 00:26:09.7514467, TimeTotal = 09:19:13.4128350, Remaining = 08:53:03.6613883, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:09.7514467, HeatingEstimate = 00:43:50.2610100, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.678365966583798;StartedAtUtc;00:26:09.7514467;09:19:13.4128350;08:53:03.6613883;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:09.7514467;00:43:50.2610100;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1570.7415125, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.6813534603474345, Elapsed = 00:26:10.7538471, TimeTotal = 09:19:13.4127129, Remaining = 08:53:02.6588658, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:10.7538471, HeatingEstimate = 00:43:49.2584875, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.6813534603474345;StartedAtUtc;00:26:10.7538471;09:19:13.4127129;08:53:02.6588658;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:10.7538471;00:43:49.2584875;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1571.7408644, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.684331843334574, Elapsed = 00:26:11.7531961, TimeTotal = 09:19:13.4127100, Remaining = 08:53:01.6595139, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:11.7531961, HeatingEstimate = 00:43:48.2591356, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.684331843334574;StartedAtUtc;00:26:11.7531961;09:19:13.4127100;08:53:01.6595139;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:11.7531961;00:43:48.2591356;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=66,powderChamber1=66,powderChamber2=66,powderChamber3=66,powderChamber4=66 [ControlledHeating.cs@169] 08/08/2026 15:43:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 66 with temperature 60.5 [HeaterCheck.cs@88] 08/08/2026 15:43:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1572.7422384, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.687316319871671, Elapsed = 00:26:12.7545908, TimeTotal = 09:19:13.4127307, Remaining = 08:53:00.6581399, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:12.7545908, HeatingEstimate = 00:43:47.2577616, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.687316319871671;StartedAtUtc;00:26:12.7545908;09:19:13.4127307;08:53:00.6581399;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:12.7545908;00:43:47.2577616;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61.25 [HeaterCheck.cs@67] 08/08/2026 15:43:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1573.7430694, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.690300440424322, Elapsed = 00:26:13.7558869, TimeTotal = 09:19:13.4131958, Remaining = 08:52:59.6573089, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:13.7558869, HeatingEstimate = 00:43:46.2569306, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.690300440424322;StartedAtUtc;00:26:13.7558869;09:19:13.4131958;08:52:59.6573089;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:13.7558869;00:43:46.2569306;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61.25 [HeaterCheck.cs@67] 08/08/2026 15:43:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1574.7447869, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.693285525097889, Elapsed = 00:26:14.7574788, TimeTotal = 09:19:13.4130702, Remaining = 08:52:58.6555914, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:14.7574788, HeatingEstimate = 00:43:45.2552131, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.693285525097889;StartedAtUtc;00:26:14.7574788;09:19:13.4130702;08:52:58.6555914;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:14.7574788;00:43:45.2552131;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1575.7490106, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.69627756724608, Elapsed = 00:26:15.7613967, TimeTotal = 09:19:13.4127644, Remaining = 08:52:57.6513677, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:15.7613967, HeatingEstimate = 00:43:44.2509894, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.69627756724608;StartedAtUtc;00:26:15.7613967;09:19:13.4127644;08:52:57.6513677;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:15.7613967;00:43:44.2509894;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1576.7486035, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.699256639516973, Elapsed = 00:26:16.7609765, TimeTotal = 09:19:13.4127513, Remaining = 08:52:56.6517748, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:16.7609765, HeatingEstimate = 00:43:43.2513965, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.699256639516973;StartedAtUtc;00:26:16.7609765;09:19:13.4127513;08:52:56.6517748;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:16.7609765;00:43:43.2513965;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1577.7489914, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.70223868354916, Elapsed = 00:26:17.7615634, TimeTotal = 09:19:13.4129503, Remaining = 08:52:55.6513869, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:17.7615634, HeatingEstimate = 00:43:42.2510086, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.70223868354916;StartedAtUtc;00:26:17.7615634;09:19:13.4129503;08:52:55.6513869;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:17.7615634;00:43:42.2510086;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61 [HeaterCheck.cs@67] 08/08/2026 15:43:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1578.7517218, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.705226473512044, Elapsed = 00:26:18.7640578, TimeTotal = 09:19:13.4127143, Remaining = 08:52:54.6486565, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:18.7640578, HeatingEstimate = 00:43:41.2482782, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.705226473512044;StartedAtUtc;00:26:18.7640578;09:19:13.4127143;08:52:54.6486565;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:18.7640578;00:43:41.2482782;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 66 with temperature 56.25 [HeaterCheck.cs@111] 08/08/2026 15:43:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=55.75 that are outside of set tolerance 10 for current step target 66 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:43:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1579.7513128, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.708205848268597, Elapsed = 00:26:19.7637442, TimeTotal = 09:19:13.4128097, Remaining = 08:52:53.6490655, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:19.7637442, HeatingEstimate = 00:43:40.2486872, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.708205848268597;StartedAtUtc;00:26:19.7637442;09:19:13.4128097;08:52:53.6490655;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:19.7637442;00:43:40.2486872;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61 [HeaterCheck.cs@67] 08/08/2026 15:43:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1580.7516582, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.711186928372102, Elapsed = 00:26:20.7639938, TimeTotal = 09:19:13.4127139, Remaining = 08:52:52.6487201, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:20.7639938, HeatingEstimate = 00:43:39.2483418, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.711186928372102;StartedAtUtc;00:26:20.7639938;09:19:13.4127139;08:52:52.6487201;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:20.7639938;00:43:39.2483418;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1581.7522499, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.714169026812647, Elapsed = 00:26:21.7645898, TimeTotal = 09:19:13.4127182, Remaining = 08:52:51.6481284, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:21.7645898, HeatingEstimate = 00:43:38.2477501, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.714169026812647;StartedAtUtc;00:26:21.7645898;09:19:13.4127182;08:52:51.6481284;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:21.7645898;00:43:38.2477501;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61 [HeaterCheck.cs@67] 08/08/2026 15:43:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1582.7574193, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.717164743286302, Elapsed = 00:26:22.7697547, TimeTotal = 09:19:13.4127137, Remaining = 08:52:50.6429590, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:09.6059227, WeightTotalEstimate = 03:20:09.6059227, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:08.4447247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:44.9556536, HeatingElapsed = 00:26:22.7697547, HeatingEstimate = 00:43:37.2425807, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:21:52.1588347, WeightEstimate = 03:20:09.6059227 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:36:47. coolingEstimate=02:06:44.9556536 [PrintingService.cs@1912] 08/08/2026 15:43:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.717164743286302;StartedAtUtc;00:26:22.7697547;09:19:13.4127137;08:52:50.6429590;False;408;0;0;00:00:00;03:20:09.6059227;03:20:09.6059227;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:08.4447247;00:00:00;02:06:44.9556536;00:26:22.7697547;00:43:37.2425807;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:21:52.1588347 [PrintingService.cs@1918] 08/08/2026 15:43:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=183677, estimate=50.55853191377667 for layer 91, Z=9.101001 [PrintingService.cs@1524] 08/08/2026 15:43:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 80, island count 8 [PrintingService.cs@1569] 08/08/2026 15:43:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 92, start=0, count=408, Z=9.201 [PrintingService.cs@1518] 08/08/2026 15:43:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2060, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:43:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61 [HeaterCheck.cs@67] 08/08/2026 15:43:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1583.7598555, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.717017051068022, Elapsed = 00:26:23.7721912, TimeTotal = 09:19:35.7147802, Remaining = 08:53:11.9425890, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:23.7721912, HeatingEstimate = 00:43:36.2401445, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:43:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.717017051068022;StartedAtUtc;00:26:23.7721912;09:19:35.7147802;08:53:11.9425890;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:23.7721912;00:43:36.2401445;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:43:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61.25 [HeaterCheck.cs@67] 08/08/2026 15:43:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1584.7609758, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.719998740216842, Elapsed = 00:26:24.7733148, TimeTotal = 09:19:35.7147835, Remaining = 08:53:10.9414687, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:24.7733148, HeatingEstimate = 00:43:35.2390242, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:43:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.719998740216842;StartedAtUtc;00:26:24.7733148;09:19:35.7147835;08:53:10.9414687;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:24.7733148;00:43:35.2390242;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1585.7646412, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.722988003587096, Elapsed = 00:26:25.7769814, TimeTotal = 09:19:35.7147847, Remaining = 08:53:09.9378033, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:25.7769814, HeatingEstimate = 00:43:34.2353588, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.722988003587096;StartedAtUtc;00:26:25.7769814;09:19:35.7147847;08:53:09.9378033;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:25.7769814;00:43:34.2353588;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1586.7651043, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.725973135580489, Elapsed = 00:26:26.7793509, TimeTotal = 09:19:35.7166911, Remaining = 08:53:08.9373402, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:26.7793509, HeatingEstimate = 00:43:33.2348957, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.725973135580489;StartedAtUtc;00:26:26.7793509;09:19:35.7166911;08:53:08.9373402;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:26.7793509;00:43:33.2348957;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61 [HeaterCheck.cs@67] 08/08/2026 15:44:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1587.7712187, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.728964317102304, Elapsed = 00:26:27.7835720, TimeTotal = 09:19:35.7147978, Remaining = 08:53:07.9312258, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:27.7835720, HeatingEstimate = 00:43:32.2287813, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.728964317102304;StartedAtUtc;00:26:27.7835720;09:19:35.7147978;08:53:07.9312258;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:27.7835720;00:43:32.2287813;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 66 with temperature 61.5 [HeaterCheck.cs@67] 08/08/2026 15:44:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1588.7709965, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.731941997608041, Elapsed = 00:26:28.7833495, TimeTotal = 09:19:35.7147975, Remaining = 08:53:06.9314480, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:28.7833495, HeatingEstimate = 00:43:31.2290035, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.731941997608041;StartedAtUtc;00:26:28.7833495;09:19:35.7147975;08:53:06.9314480;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:28.7833495;00:43:31.2290035;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1589.7751652, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.734954026257336, Elapsed = 00:26:29.7950146, TimeTotal = 09:19:35.7222939, Remaining = 08:53:05.9272793, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:29.7950146, HeatingEstimate = 00:43:30.2248348, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.734954026257336;StartedAtUtc;00:26:29.7950146;09:19:35.7222939;08:53:05.9272793;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:29.7950146;00:43:30.2248348;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1590.7857437, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.737942579733484, Elapsed = 00:26:30.7980874, TimeTotal = 09:19:35.7147882, Remaining = 08:53:04.9167008, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:30.7980874, HeatingEstimate = 00:43:29.2142563, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.737942579733484;StartedAtUtc;00:26:30.7980874;09:19:35.7147882;08:53:04.9167008;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:30.7980874;00:43:29.2142563;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1591.7838927, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.740916161525, Elapsed = 00:26:31.7965013, TimeTotal = 09:19:35.7150531, Remaining = 08:53:03.9185518, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:31.7965013, HeatingEstimate = 00:43:28.2161073, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.740916161525;StartedAtUtc;00:26:31.7965013;09:19:35.7150531;08:53:03.9185518;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:31.7965013;00:43:28.2161073;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=67,powderChamber1=67,powderChamber2=67,powderChamber3=67,powderChamber4=67 [ControlledHeating.cs@169] 08/08/2026 15:44:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 67 with temperature 61.25 [HeaterCheck.cs@88] 08/08/2026 15:44:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1592.7839299, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.743893886886137, Elapsed = 00:26:32.7962817, TimeTotal = 09:19:35.7147963, Remaining = 08:53:02.9185146, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:32.7962817, HeatingEstimate = 00:43:27.2160701, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.743893886886137;StartedAtUtc;00:26:32.7962817;09:19:35.7147963;08:53:02.9185146;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:32.7962817;00:43:27.2160701;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1593.7846539, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.746875788663261, Elapsed = 00:26:33.7975000, TimeTotal = 09:19:35.7152906, Remaining = 08:53:01.9177906, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:33.7975000, HeatingEstimate = 00:43:26.2153461, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.746875788663261;StartedAtUtc;00:26:33.7975000;09:19:35.7152906;08:53:01.9177906;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:33.7975000;00:43:26.2153461;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1594.7852342, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.749854480240302, Elapsed = 00:26:34.7975939, TimeTotal = 09:19:35.7148042, Remaining = 08:53:00.9172103, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:34.7975939, HeatingEstimate = 00:43:25.2147658, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.749854480240302;StartedAtUtc;00:26:34.7975939;09:19:35.7148042;08:53:00.9172103;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:34.7975939;00:43:25.2147658;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1595.7862328, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.752842549395181, Elapsed = 00:26:35.8009726, TimeTotal = 09:19:35.7171843, Remaining = 08:52:59.9162117, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:35.8009726, HeatingEstimate = 00:43:24.2137672, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.752842549395181;StartedAtUtc;00:26:35.8009726;09:19:35.7171843;08:52:59.9162117;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:35.8009726;00:43:24.2137672;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1596.788949, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.755824025824299, Elapsed = 00:26:36.8019416, TimeTotal = 09:19:35.7154371, Remaining = 08:52:58.9134955, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:36.8019416, HeatingEstimate = 00:43:23.2110510, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.755824025824299;StartedAtUtc;00:26:36.8019416;09:19:35.7154371;08:52:58.9134955;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:36.8019416;00:43:23.2110510;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1597.7879837, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.758797653809058, Elapsed = 00:26:37.8003276, TimeTotal = 09:19:35.7147884, Remaining = 08:52:57.9144608, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:37.8003276, HeatingEstimate = 00:43:22.2120163, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.758797653809058;StartedAtUtc;00:26:37.8003276;09:19:35.7147884;08:52:57.9144608;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:37.8003276;00:43:22.2120163;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1598.787991, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.761776006499562, Elapsed = 00:26:38.8003306, TimeTotal = 09:19:35.7147841, Remaining = 08:52:56.9144535, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:38.8003306, HeatingEstimate = 00:43:21.2120090, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.761776006499562;StartedAtUtc;00:26:38.8003306;09:19:35.7147841;08:52:56.9144535;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:38.8003306;00:43:21.2120090;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 67 with temperature 62 [HeaterCheck.cs@67] 08/08/2026 15:44:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 08/08/2026 15:44:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1599.7876245, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.764753245035231, Elapsed = 00:26:39.7999595, TimeTotal = 09:19:35.7147795, Remaining = 08:52:55.9148200, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:39.7999595, HeatingEstimate = 00:43:20.2123755, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.764753245035231;StartedAtUtc;00:26:39.7999595;09:19:35.7147795;08:52:55.9148200;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:39.7999595;00:43:20.2123755;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=56.5,powderChamber4=56.75 that are outside of set tolerance 10 for current step target 67 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:44:14 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (361 cases) [SoftAnalysisSurfaceHeater.cs@800] 08/08/2026 15:44:14 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 08/08/2026 15:44:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 08/08/2026 15:44:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 08/08/2026 15:44:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1600.7881325, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.767733095223658, Elapsed = 00:26:40.8004654, TimeTotal = 09:19:35.7147774, Remaining = 08:52:54.9143120, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:40.8004654, HeatingEstimate = 00:43:19.2118675, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.767733095223658;StartedAtUtc;00:26:40.8004654;09:19:35.7147774;08:52:54.9143120;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:40.8004654;00:43:19.2118675;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:15 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 08/08/2026 15:44:15 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 08/08/2026 15:44:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 67 with temperature 62 [HeaterCheck.cs@67] 08/08/2026 15:44:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1601.7884251, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.770712308415351, Elapsed = 00:26:41.8007575, TimeTotal = 09:19:35.7147769, Remaining = 08:52:53.9140194, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:41.8007575, HeatingEstimate = 00:43:18.2115749, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.770712308415351;StartedAtUtc;00:26:41.8007575;09:19:35.7147769;08:52:53.9140194;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:41.8007575;00:43:18.2115749;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 67 with temperature 62 [HeaterCheck.cs@67] 08/08/2026 15:44:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1602.7886341, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.7736912927544255, Elapsed = 00:26:42.8009731, TimeTotal = 09:19:35.7147835, Remaining = 08:52:52.9138104, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:42.8009731, HeatingEstimate = 00:43:17.2113659, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.7736912927544255;StartedAtUtc;00:26:42.8009731;09:19:35.7147835;08:52:52.9138104;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:42.8009731;00:43:17.2113659;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1603.7879431, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.776670294544037, Elapsed = 00:26:43.8012400, TimeTotal = 09:19:35.7157414, Remaining = 08:52:51.9145014, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:43.8012400, HeatingEstimate = 00:43:16.2120569, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.776670294544037;StartedAtUtc;00:26:43.8012400;09:19:35.7157414;08:52:51.9145014;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:43.8012400;00:43:16.2120569;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=68,powderChamber1=68,powderChamber2=68,powderChamber3=68,powderChamber4=68 [ControlledHeating.cs@169] 08/08/2026 15:44:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 68 with temperature 61.5 [HeaterCheck.cs@88] 08/08/2026 15:44:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 68 with temperature 56.5 [HeaterCheck.cs@111] 08/08/2026 15:44:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1604.7930023, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.779661033570124, Elapsed = 00:26:44.8053570, TimeTotal = 09:19:35.7147992, Remaining = 08:52:50.9094422, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:44.8053570, HeatingEstimate = 00:43:15.2069977, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.779661033570124;StartedAtUtc;00:26:44.8053570;09:19:35.7147992;08:52:50.9094422;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:44.8053570;00:43:15.2069977;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1605.8018597, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.782666388929658, Elapsed = 00:26:45.8144372, TimeTotal = 09:19:35.7150220, Remaining = 08:52:49.9005848, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:45.8144372, HeatingEstimate = 00:43:14.1981403, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.782666388929658;StartedAtUtc;00:26:45.8144372;09:19:35.7150220;08:52:49.9005848;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:45.8144372;00:43:14.1981403;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=145197, estimate=41.17832182931066 for layer 92, Z=9.201 [PrintingService.cs@1524] 08/08/2026 15:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1606.8051702, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.785659554810157, Elapsed = 00:26:46.8194978, TimeTotal = 09:19:35.7167721, Remaining = 08:52:48.8972743, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:26.1259717, WeightTotalEstimate = 03:20:26.1259717, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:24.9647737, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:50.7376708, HeatingElapsed = 00:26:46.8194978, HeatingEstimate = 00:43:13.1948298, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:08.6788837, WeightEstimate = 03:20:26.1259717 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:09. coolingEstimate=02:06:50.7376708 [PrintingService.cs@1912] 08/08/2026 15:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.785659554810157;StartedAtUtc;00:26:46.8194978;09:19:35.7167721;08:52:48.8972743;False;408;0;0;00:00:00;03:20:26.1259717;03:20:26.1259717;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:24.9647737;00:00:00;02:06:50.7376708;00:26:46.8194978;00:43:13.1948298;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:08.6788837 [PrintingService.cs@1918] 08/08/2026 15:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 81, island count 8 [PrintingService.cs@1569] 08/08/2026 15:44:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 93, start=0, count=408, Z=9.301001 [PrintingService.cs@1518] 08/08/2026 15:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2394, instances=9 (object-per-object) [PrintingService.cs@263] 08/08/2026 15:44:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1607.810614, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.787602733920194, Elapsed = 00:26:47.8229542, TimeTotal = 09:19:43.0486270, Remaining = 08:52:55.2256728, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:47.8229542, HeatingEstimate = 00:43:12.1893860, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.787602733920194;StartedAtUtc;00:26:47.8229542;09:19:43.0486270;08:52:55.2256728;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:47.8229542;00:43:12.1893860;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1608.8133209, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.790592623586303, Elapsed = 00:26:48.8271202, TimeTotal = 09:19:43.0500861, Remaining = 08:52:54.2229659, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:48.8271202, HeatingEstimate = 00:43:11.1866791, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.790592623586303;StartedAtUtc;00:26:48.8271202;09:19:43.0500861;08:52:54.2229659;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:48.8271202;00:43:11.1866791;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1609.8156961, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.793573237869201, Elapsed = 00:26:49.8280312, TimeTotal = 09:19:43.0486219, Remaining = 08:52:53.2205907, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:49.8280312, HeatingEstimate = 00:43:10.1843039, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.793573237869201;StartedAtUtc;00:26:49.8280312;09:19:43.0486219;08:52:53.2205907;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:49.8280312;00:43:10.1843039;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68 with temperature 63 [HeaterCheck.cs@67] 08/08/2026 15:44:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1610.8175116, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.796557382957367, Elapsed = 00:26:50.8302158, TimeTotal = 09:19:43.0489910, Remaining = 08:52:52.2187752, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:50.8302158, HeatingEstimate = 00:43:09.1824884, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.796557382957367;StartedAtUtc;00:26:50.8302158;09:19:43.0489910;08:52:52.2187752;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:50.8302158;00:43:09.1824884;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=57.25,powderChamber4=57 that are outside of set tolerance 10 for current step target 68 and final target 145 [ControlledHeating.cs@205] 08/08/2026 15:44:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1611.8216369, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.7995463322151455, Elapsed = 00:26:51.8339787, TimeTotal = 09:19:43.0486286, Remaining = 08:52:51.2146499, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:51.8339787, HeatingEstimate = 00:43:08.1783631, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.7995463322151455;StartedAtUtc;00:26:51.8339787;09:19:43.0486286;08:52:51.2146499;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:51.8339787;00:43:08.1783631;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1612.8189071, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.80251589814769, Elapsed = 00:26:52.8312495, TimeTotal = 09:19:43.0486292, Remaining = 08:52:50.2173797, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:52.8312495, HeatingEstimate = 00:43:07.1810929, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.80251589814769;StartedAtUtc;00:26:52.8312495;09:19:43.0486292;08:52:50.2173797;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:52.8312495;00:43:07.1810929;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1613.8196623, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.805495867701097, Elapsed = 00:26:53.8320146, TimeTotal = 09:19:43.0486391, Remaining = 08:52:49.2166245, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:53.8320146, HeatingEstimate = 00:43:06.1803377, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.805495867701097;StartedAtUtc;00:26:53.8320146;09:19:43.0486391;08:52:49.2166245;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:53.8320146;00:43:06.1803377;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918] 08/08/2026 15:44:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68 with temperature 63.25 [HeaterCheck.cs@67] 08/08/2026 15:44:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1614.8226081, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 08/08/2026 14:17:32, Progress = 4.808482374642459, Elapsed = 00:26:54.8349754, TimeTotal = 09:19:43.0486541, Remaining = 08:52:48.2136787, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 03:20:31.5584475, WeightTotalEstimate = 03:20:31.5584475, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.8984140, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0312060, TimeLayers = 06:02:30.3972495, CoolingElapsed = 00:00:00, CoolingEstimate = 02:06:52.6390373, HeatingElapsed = 00:26:54.8349754, HeatingEstimate = 00:43:05.1773919, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:20, CoolingFrom = 188, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:38:46.7938200, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:29.4920700, JobElapsed = 00:00:00, JobTotal = 05:22:14.1113595, WeightEstimate = 03:20:31.5584475 }, JobName = Peter's Trophy Parts and other Stuff }. UTC calculatedEstimate: 08/08/2026 23:37:17. coolingEstimate=02:06:52.6390373 [PrintingService.cs@1912] 08/08/2026 15:44:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.808482374642459;StartedAtUtc;00:26:54.8349754;09:19:43.0486541;08:52:48.2136787;False;408;0;0;00:00:00;03:20:31.5584475;03:20:31.5584475;00:00:00;00:00:00;00:00:00;00:00:14.8984140;00:00:00;00:00:00.0312060;06:02:30.3972495;00:00:00;02:06:52.6390373;00:26:54.8349754;00:43:05.1773919;00:00:00;00:00:20;188;00:00:00;00:38:46.7938200;00:00:00;00:01:29.4920700;00:00:00;05:22:14.1113595 [PrintingService.cs@1918]