mirror of https://referencesource.org/plumbing-fitting-thread-standards/
Browse files- README.md +1 -1
- data/records.jsonl +6 -16
README.md
CHANGED
|
@@ -23,7 +23,7 @@ Machine-readable: https://referencesource.org/plumbing-fitting-thread-standards/
|
|
| 23 |
- **Last verified:** 2026-08-12
|
| 24 |
- **Stale after:** 2028-08-11 (past this date, prefer the canonical copy —
|
| 25 |
it re-verifies on a cadence this snapshot does not)
|
| 26 |
-
- **Records:**
|
| 27 |
|
| 28 |
Dimensional specifications for NPT and BSP pipe thread sizes used in plumbing, hydraulic, and gas fittings worldwide. For each nominal pipe size within each standard, gives threads per inch, pitch, major diameter, and minor diameter — the numbers needed to identify an unknown thread or confirm whether two fittings will mate. Combines American (ASME B1.20.1) and British/ISO (ISO 228, ISO 7) standards in one table so the critical differences are visible side by side.
|
| 29 |
|
|
|
|
| 23 |
- **Last verified:** 2026-08-12
|
| 24 |
- **Stale after:** 2028-08-11 (past this date, prefer the canonical copy —
|
| 25 |
it re-verifies on a cadence this snapshot does not)
|
| 26 |
+
- **Records:** 93
|
| 27 |
|
| 28 |
Dimensional specifications for NPT and BSP pipe thread sizes used in plumbing, hydraulic, and gas fittings worldwide. For each nominal pipe size within each standard, gives threads per inch, pitch, major diameter, and minor diameter — the numbers needed to identify an unknown thread or confirm whether two fittings will mate. Combines American (ASME B1.20.1) and British/ISO (ISO 228, ISO 7) standards in one table so the critical differences are visible side by side.
|
| 29 |
|
data/records.jsonl
CHANGED
|
@@ -2,20 +2,13 @@
|
|
| 2 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "threads_per_inch", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "value": "11 1/2"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-16 (1) | 11½ | 33.3 | 1.31 | 31.5 | 1.24", "value": "11½"}, {"as_of": "2026-08-31", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 |", "value": "11½"}]}, {"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "value": "2.2087"}, {"as_of": "2026-08-31", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 |", "value": "2.20878"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "value": "33.4010"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-16 (1) | 11½ | 33.3 | 1.31 | 31.5 | 1.24", "value": "33.3"}, {"as_of": "2026-08-31", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 |", "value": "33.4"}]}], "governing_standard": "ASME B1.20.1", "id": "1-3", "major_diameter_mm": "33.4010", "nominal_size": "1", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-3/", "verified_fields": ["major_diameter_mm", "nominal_size", "thread_pitch_mm"]}
|
| 3 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-10", "major_diameter_mm": "33.249", "minor_diameter_mm": "30.292", "nominal_size": "1", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 | 1\" | 11 | 2.309 | 33.249 | 31.770 | 30.292", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-10/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 4 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "bspt-1", "major_diameter_mm": "33.25", "minor_diameter_mm": "30.29", "nominal_size": "1", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT R 1 | 1\" | 11 | 2.309 | 10.4 | 1.0 / 2.3 | 33.25 | 31.77 | 30.29 | 0 | -999.00", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/bspt-1/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 5 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "
|
| 6 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "
|
| 7 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-9", "major_diameter_mm": "46.803", "minor_diameter_mm": "44.846", "nominal_size": "1½", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1½ | 11 | 0.0909 | 2.309 | 1.882 | 46.803 | 1.7656 | 44.846 | 0.5 | 12.7", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-9/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 8 |
-
{"derived_fields": ["thread_standard"], "id": "bsp-1-3", "major_diameter_mm": "41.9", "nominal_size": "1 ¼", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-20 (1 ¼) | 11 | 41.9 | 1.65 | 39.6 | 1.56", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-3/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 9 |
-
{"derived_fields": ["thread_standard"], "id": "bsp-1-5", "major_diameter_mm": "47.8", "nominal_size": "1 ½", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-24 (1 ½) | 11 | 47.8 | 1.88 | 45.5 | 1.79", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/bsp-1-5/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 10 |
-
{"derived_fields": ["thread_standard"], "id": "npt-1-3", "major_diameter_mm": "42.2", "nominal_size": "1 ¼", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-20 (1 ¼) | 11½ | 42.2 | 1.66 | 40.1 | 1.58", "thread_standard": "NPT", "threads_per_inch": "11½", "url": "https://referencesource.org/plumbing-fitting-thread-standards/npt-1-3/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 11 |
-
{"derived_fields": ["thread_standard"], "id": "npt-1-5", "major_diameter_mm": "48.3", "nominal_size": "1 ½", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-24 (1 ½) | 11½ | 48.3 | 1.90 | 46.2 | 1.82", "thread_standard": "NPT", "threads_per_inch": "11½", "url": "https://referencesource.org/plumbing-fitting-thread-standards/npt-1-5/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 12 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1½ | 11 | 2.309 | 1.479 | 47.803 | 46.324 | 44.845 |", "value": "47.803"}, {"as_of": "2026-08-12", "source": "https://www.htsspares.com/blog/how-to/how-to-measure-your-bsp-fittings", "source_quote": "1-1/2 Inch BSP | 47.80 mm / 1-3/4\" | 11", "value": "47.80"}]}], "governing_standard": "ISO 228-1", "id": "1-1-2", "major_diameter_mm": "47.803", "minor_diameter_mm": "44.845", "nominal_size": "1-1/2", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1½ | 11 | 2.309 | 1.479 | 47.803 | 46.324 | 44.845 |", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 13 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ASME B1.20.1", "id": "1-1-2-2", "major_diameter_mm": "48.2600", "nominal_size": "1-1/2", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.82234 | 0.7235 | 8.32 | 1.84131 | 1.0252 | 1.900 | 48.2600 | 1+ 47 ⁄ 64 | 44.0531 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm"]}
|
| 14 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-1-2-3", "major_diameter_mm": "47.803", "minor_diameter_mm": "44.846", "nominal_size": "1 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 1/2 | 1 1/2\" | 11 | 2.309 | 47.803 | 46.324 | 44.846", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 15 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "1-1-2-2-2", "major_diameter_mm": "47.80", "minor_diameter_mm": "44.85", "nominal_size": "1 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT Rp 1 1/2 | 1 1/2\" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2\" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-2-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 16 |
{"derived_fields": ["thread_standard"], "id": "1-1-2-inch-bsp", "major_diameter_mm": "47.80", "nominal_size": "1-1/2 Inch BSP", "source": "https://www.lsengineers.co.uk/advice-centre/bsp-thread-sizes-explained", "source_quote": "1-1/2 Inch BSP | 47.80 mm | 45.5 mm | 11", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-inch-bsp/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 17 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1¼ | 11 | 2.309 | 1.479 | 41.910 | 40.431 | 38.952 |", "value": "41.910"}, {"as_of": "2026-08-12", "source": "https://www.htsspares.com/blog/how-to/how-to-measure-your-bsp-fittings", "source_quote": "1-1/4 Inch BSP | 41.91 mm / 1.-1/2\" | 11", "value": "41.91"}]}], "governing_standard": "ISO 228-1", "id": "1-1-4", "major_diameter_mm": "41.910", "minor_diameter_mm": "38.952", "nominal_size": "1-1/4", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1¼ | 11 | 2.309 | 1.479 | 41.910 | 40.431 | 38.952 |", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 18 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ASME B1.20.1", "id": "1-1-4-2", "major_diameter_mm": "42.1640", "nominal_size": "1-1/4", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 4 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.58338 | 0.7068 | 8.13 | 1.60131 | 1.0085 | 1.660 | 42.1640 | 1+ 1 ⁄ 2 | 38.1000 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm"]}
|
| 19 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-1-4-3", "major_diameter_mm": "41.910", "minor_diameter_mm": "38.953", "nominal_size": "1 1/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 1/4 | 1 1/4\" | 11 | 2.309 | 41.910 | 40.431 | 38.953", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 20 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "1-1-4-2-2", "major_diameter_mm": "41.91", "minor_diameter_mm": "38.95", "nominal_size": "1 1/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT Rp 1 1/4 | 1 1/4\" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2\" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2\" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-2-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 21 |
{"derived_fields": ["thread_standard"], "id": "1-1-4-inch-bsp", "major_diameter_mm": "41.91", "nominal_size": "1-1/4 Inch BSP", "source": "https://www.lsengineers.co.uk/advice-centre/bsp-thread-sizes-explained", "source_quote": "1-1/4 Inch BSP | 41.91 mm | 39.6 mm | 11", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-inch-bsp/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
|
@@ -26,7 +19,6 @@
|
|
| 26 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-2-4", "major_diameter_mm": "20.955", "minor_diameter_mm": "18.632", "nominal_size": "1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1/2 | 1/2\" | 14 | 1.814 | 20.955 | 19.793 | 18.632", "thread_angle_degrees": "55", "thread_pitch_mm": "1.814", "thread_standard": "BSPP", "threads_per_inch": "14", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-2-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 27 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "1-2-2-3", "major_diameter_mm": "20.96", "minor_diameter_mm": "18.63", "nominal_size": "1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "20.96 | 19.79 | 18.63 | 0.142 | 18.5 | Rp | BSPT Rp 3/4 | 3/4\" | 14 | 1.814 | 9.5 | 0 | 26.44 | 25.28 | 24.12 | 0.142 | 24.0 | Rp | BSPT Rp 1 | 1\" | 11 | 2.309 | 10.4 | 0 | 33.25 | 31.77 | 30.29 | 0.180 | 30.2 | Rp | BSPT Rp 1 1/4 | 1 1/4\" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2\" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2\" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "1.814", "thread_standard": "BSPT", "threads_per_inch": "14", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-2-2-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 28 |
{"derived_fields": ["thread_standard"], "id": "1-2-inch-bsp", "major_diameter_mm": "20.99", "nominal_size": "1/2 Inch BSP", "source": "https://www.lsengineers.co.uk/advice-centre/bsp-thread-sizes-explained", "source_quote": "1/2 Inch BSP | 20.99 mm | 19.1 mm | 14", "thread_standard": "BSP", "threads_per_inch": "14", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-2-inch-bsp/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 29 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ASME B1.20.1", "id": "1-3-2", "major_diameter_mm": "42.16", "nominal_size": "1¼", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1¼ | 11½ | 0.08696 | 2.20878 | 1.66 | 42.16 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.20878", "thread_standard": "NPT", "threads_per_inch": "11½", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-3-2/", "verified_fields": ["major_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 30 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-3-4", "major_diameter_mm": "53.746", "minor_diameter_mm": "50.789", "nominal_size": "1 3/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 3/4 | 1 3/4\" | 11 | 2.309 | 53.746 | 52.267 | 50.789", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-3-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 31 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1/4 | 19 | 1.337 | 0.856 | 13.157 | 12.301 | 11.445 |", "value": "13.157"}, {"as_of": "2026-08-12", "source": "https://www.htsspares.com/blog/how-to/how-to-measure-your-bsp-fittings", "source_quote": "1/4 Inch BSP | 13.16 mm / 1/2\" | 19", "value": "13.16"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-04 (1/4) | 19 | 13.2 | 0.52 | 11.9 | 0.47", "value": "13.2"}]}], "governing_standard": "ISO 228-1", "id": "1-4", "major_diameter_mm": "13.157", "minor_diameter_mm": "11.445", "nominal_size": "1/4", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1/4 | 19 | 1.337 | 0.856 | 13.157 | 12.301 | 11.445 |", "thread_angle_degrees": "55", "thread_pitch_mm": "1.337", "thread_standard": "BSP", "threads_per_inch": "19", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 32 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 |", "value": "1.4111"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1/4 | 18 | 0.05556 | 1.41122 | 0.54 | 13.72 |", "value": "1.41122"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 |", "value": "13.716"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1/4 | 18 | 0.05556 | 1.41122 | 0.54 | 13.72 |", "value": "13.72"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-04 (1/4) | 18 | 13.7 | 0.54 | 12.4 | 0.49", "value": "13.7"}]}], "governing_standard": "ASME B1.20.1", "id": "1-4-2", "major_diameter_mm": "13.716", "nominal_size": "1/4", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 |", "thread_angle_degrees": "60", "thread_pitch_mm": "1.4111", "thread_standard": "NPT", "threads_per_inch": "18", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-4-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
|
@@ -47,10 +39,8 @@
|
|
| 47 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "threads_per_inch", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "value": "11 1/2"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 |", "value": "11½"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-32 (2) | 11½ | 60.4 | 2.38 | 57.9 | 2.29", "value": "11½"}]}, {"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "value": "2.2087"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 |", "value": "2.20878"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "value": "60.3250"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 |", "value": "60.33"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-32 (2) | 11½ | 60.4 | 2.38 | 57.9 | 2.29", "value": "60.4"}]}], "governing_standard": "ASME B1.20.1", "id": "2-2", "major_diameter_mm": "60.3250", "nominal_size": "2", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-2/", "verified_fields": ["major_diameter_mm", "nominal_size", "thread_pitch_mm"]}
|
| 48 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-5", "major_diameter_mm": "59.614", "minor_diameter_mm": "56.657", "nominal_size": "2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 2 | 2\" | 11 | 2.309 | 59.614 | 58.135 | 56.657", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-5/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 49 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "bspt-2", "major_diameter_mm": "59.61", "minor_diameter_mm": "56.66", "nominal_size": "2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT R 2 | 2\" | 11 | 2.309 | 15.9 | 1.0 / 2.3 | 59.61 | 58.14 | 56.66 | 0 | -999.00", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/bspt-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 50 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "
|
| 51 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "
|
| 52 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-1-2", "major_diameter_mm": "75.184", "minor_diameter_mm": "72.226", "nominal_size": "2-1/2", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "2½ | 11 | 2.309 | 1.479 | 75.184 | 73.705 | 72.226 |", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 53 |
-
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ASME B1.20.1", "id": "2-1-2-2", "major_diameter_mm": "73.0250", "nominal_size": "2-1/2", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2+ 1 ⁄ 2 | 8 | 0.12500000 | 3.1750 | 0.6820 | 5.46 | 2.76216 | 1.1375 | 9.10 | 2.79063 | 1.5712 | 2.875 | 73.0250 | 2+ 5 ⁄ 8 | 66.6750 |", "thread_angle_degrees": "60", "thread_pitch_mm": "3.1750", "thread_standard": "NPT", "threads_per_inch": "8", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 54 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-1-2-3", "major_diameter_mm": "75.184", "minor_diameter_mm": "72.227", "nominal_size": "2 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 2 1/2 | 2 1/2\" | 11 | 2.309 | 75.184 | 73.705 | 72.227", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 55 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "2-1-2-2-2", "major_diameter_mm": "75.18", "minor_diameter_mm": "72.23", "nominal_size": "2 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-2-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 56 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-1-4", "major_diameter_mm": "65.710", "minor_diameter_mm": "62.753", "nominal_size": "2 1/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 2 1/4 | 2 1/4\" | 11 | 2.309 | 65.710 | 64.231 | 62.753", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
|
|
|
| 2 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "threads_per_inch", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "value": "11 1/2"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-16 (1) | 11½ | 33.3 | 1.31 | 31.5 | 1.24", "value": "11½"}, {"as_of": "2026-08-31", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 |", "value": "11½"}]}, {"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "value": "2.2087"}, {"as_of": "2026-08-31", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 |", "value": "2.20878"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "value": "33.4010"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-16 (1) | 11½ | 33.3 | 1.31 | 31.5 | 1.24", "value": "33.3"}, {"as_of": "2026-08-31", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1 | 11½ | 0.08696 | 2.20878 | 1.315 | 33.4 |", "value": "33.4"}]}], "governing_standard": "ASME B1.20.1", "id": "1-3", "major_diameter_mm": "33.4010", "nominal_size": "1", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4000 | 4.60 | 1.23863 | 0.6828 | 7.85 | 1.25631 | 0.9845 | 1.315 | 33.4010 | 1+ 5 ⁄ 32 | 29.3688 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-3/", "verified_fields": ["major_diameter_mm", "nominal_size", "thread_pitch_mm"]}
|
| 3 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-10", "major_diameter_mm": "33.249", "minor_diameter_mm": "30.292", "nominal_size": "1", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 | 1\" | 11 | 2.309 | 33.249 | 31.770 | 30.292", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-10/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 4 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "bspt-1", "major_diameter_mm": "33.25", "minor_diameter_mm": "30.29", "nominal_size": "1", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT R 1 | 1\" | 11 | 2.309 | 10.4 | 1.0 / 2.3 | 33.25 | 31.77 | 30.29 | 0 | -999.00", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/bspt-1/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 5 |
+
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1½ | 11 | 2.309 | 1.479 | 47.803 | 46.324 | 44.845 |", "value": "47.803"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1½ | 11 | 0.0909 | 2.309 | 1.882 | 46.803 | 1.7656 | 44.846 | 0.5 | 12.7", "value": "46.803"}, {"as_of": "2026-08-12", "source": "https://www.htsspares.com/blog/how-to/how-to-measure-your-bsp-fittings", "source_quote": "1-1/2 Inch BSP | 47.80 mm / 1-3/4\" | 11", "value": "47.80"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-24 (1 ½) | 11 | 47.8 | 1.88 | 45.5 | 1.79", "value": "47.8"}]}, {"field": "minor_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1½ | 11 | 2.309 | 1.479 | 47.803 | 46.324 | 44.845 |", "value": "44.845"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1½ | 11 | 0.0909 | 2.309 | 1.882 | 46.803 | 1.7656 | 44.846 | 0.5 | 12.7", "value": "44.846"}]}], "governing_standard": "ISO 228-1", "id": "1-1-2", "major_diameter_mm": "47.803", "minor_diameter_mm": "44.845", "nominal_size": "1-1/2", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1½ | 11 | 2.309 | 1.479 | 47.803 | 46.324 | 44.845 |", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 6 |
+
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "threads_per_inch", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.82234 | 0.7235 | 8.32 | 1.84131 | 1.0252 | 1.900 | 48.2600 | 1+ 47 ⁄ 64 | 44.0531 |", "value": "11 1/2"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1½ | 11½ | 0.08695 | 2.20878 | 1.9 | 48.26 |", "value": "11½"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-24 (1 ½) | 11½ | 48.3 | 1.90 | 46.2 | 1.82", "value": "11½"}]}, {"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.82234 | 0.7235 | 8.32 | 1.84131 | 1.0252 | 1.900 | 48.2600 | 1+ 47 ⁄ 64 | 44.0531 |", "value": "2.2087"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1½ | 11½ | 0.08695 | 2.20878 | 1.9 | 48.26 |", "value": "2.20878"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.82234 | 0.7235 | 8.32 | 1.84131 | 1.0252 | 1.900 | 48.2600 | 1+ 47 ⁄ 64 | 44.0531 |", "value": "48.2600"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1½ | 11½ | 0.08695 | 2.20878 | 1.9 | 48.26 |", "value": "48.26"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-24 (1 ½) | 11½ | 48.3 | 1.90 | 46.2 | 1.82", "value": "48.3"}]}], "governing_standard": "ASME B1.20.1", "id": "1-1-2-2", "major_diameter_mm": "48.2600", "nominal_size": "1-1/2", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.82234 | 0.7235 | 8.32 | 1.84131 | 1.0252 | 1.900 | 48.2600 | 1+ 47 ⁄ 64 | 44.0531 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm"]}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 7 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-1-2-3", "major_diameter_mm": "47.803", "minor_diameter_mm": "44.846", "nominal_size": "1 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 1/2 | 1 1/2\" | 11 | 2.309 | 47.803 | 46.324 | 44.846", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 8 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "1-1-2-2-2", "major_diameter_mm": "47.80", "minor_diameter_mm": "44.85", "nominal_size": "1 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT Rp 1 1/2 | 1 1/2\" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2\" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-2-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 9 |
{"derived_fields": ["thread_standard"], "id": "1-1-2-inch-bsp", "major_diameter_mm": "47.80", "nominal_size": "1-1/2 Inch BSP", "source": "https://www.lsengineers.co.uk/advice-centre/bsp-thread-sizes-explained", "source_quote": "1-1/2 Inch BSP | 47.80 mm | 45.5 mm | 11", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-2-inch-bsp/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
| 10 |
+
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1¼ | 11 | 2.309 | 1.479 | 41.910 | 40.431 | 38.952 |", "value": "41.910"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1¼ | 11 | 0.0909 | 2.309 | 1.65 | 41.91 | 1.5336 | 38.953 | 0.5 | 12.7", "value": "41.91"}, {"as_of": "2026-08-12", "source": "https://www.htsspares.com/blog/how-to/how-to-measure-your-bsp-fittings", "source_quote": "1-1/4 Inch BSP | 41.91 mm / 1.-1/2\" | 11", "value": "41.91"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-20 (1 ¼) | 11 | 41.9 | 1.65 | 39.6 | 1.56", "value": "41.9"}]}, {"field": "minor_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1¼ | 11 | 2.309 | 1.479 | 41.910 | 40.431 | 38.952 |", "value": "38.952"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1¼ | 11 | 0.0909 | 2.309 | 1.65 | 41.91 | 1.5336 | 38.953 | 0.5 | 12.7", "value": "38.953"}]}], "governing_standard": "ISO 228-1", "id": "1-1-4", "major_diameter_mm": "41.910", "minor_diameter_mm": "38.952", "nominal_size": "1-1/4", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1¼ | 11 | 2.309 | 1.479 | 41.910 | 40.431 | 38.952 |", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 11 |
+
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "threads_per_inch", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 4 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.58338 | 0.7068 | 8.13 | 1.60131 | 1.0085 | 1.660 | 42.1640 | 1+ 1 ⁄ 2 | 38.1000 |", "value": "11 1/2"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1¼ | 11½ | 0.08696 | 2.20878 | 1.66 | 42.16 |", "value": "11½"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-20 (1 ¼) | 11½ | 42.2 | 1.66 | 40.1 | 1.58", "value": "11½"}]}, {"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 4 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.58338 | 0.7068 | 8.13 | 1.60131 | 1.0085 | 1.660 | 42.1640 | 1+ 1 ⁄ 2 | 38.1000 |", "value": "2.2087"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1¼ | 11½ | 0.08696 | 2.20878 | 1.66 | 42.16 |", "value": "2.20878"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 4 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.58338 | 0.7068 | 8.13 | 1.60131 | 1.0085 | 1.660 | 42.1640 | 1+ 1 ⁄ 2 | 38.1000 |", "value": "42.1640"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1¼ | 11½ | 0.08696 | 2.20878 | 1.66 | 42.16 |", "value": "42.16"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-20 (1 ¼) | 11½ | 42.2 | 1.66 | 40.1 | 1.58", "value": "42.2"}]}], "governing_standard": "ASME B1.20.1", "id": "1-1-4-2", "major_diameter_mm": "42.1640", "nominal_size": "1-1/4", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1+ 1 ⁄ 4 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4200 | 4.83 | 1.58338 | 0.7068 | 8.13 | 1.60131 | 1.0085 | 1.660 | 42.1640 | 1+ 1 ⁄ 2 | 38.1000 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm"]}
|
| 12 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-1-4-3", "major_diameter_mm": "41.910", "minor_diameter_mm": "38.953", "nominal_size": "1 1/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 1/4 | 1 1/4\" | 11 | 2.309 | 41.910 | 40.431 | 38.953", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 13 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "1-1-4-2-2", "major_diameter_mm": "41.91", "minor_diameter_mm": "38.95", "nominal_size": "1 1/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT Rp 1 1/4 | 1 1/4\" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2\" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2\" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-2-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 14 |
{"derived_fields": ["thread_standard"], "id": "1-1-4-inch-bsp", "major_diameter_mm": "41.91", "nominal_size": "1-1/4 Inch BSP", "source": "https://www.lsengineers.co.uk/advice-centre/bsp-thread-sizes-explained", "source_quote": "1-1/4 Inch BSP | 41.91 mm | 39.6 mm | 11", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-1-4-inch-bsp/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
|
|
|
| 19 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-2-4", "major_diameter_mm": "20.955", "minor_diameter_mm": "18.632", "nominal_size": "1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1/2 | 1/2\" | 14 | 1.814 | 20.955 | 19.793 | 18.632", "thread_angle_degrees": "55", "thread_pitch_mm": "1.814", "thread_standard": "BSPP", "threads_per_inch": "14", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-2-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 20 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "1-2-2-3", "major_diameter_mm": "20.96", "minor_diameter_mm": "18.63", "nominal_size": "1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "20.96 | 19.79 | 18.63 | 0.142 | 18.5 | Rp | BSPT Rp 3/4 | 3/4\" | 14 | 1.814 | 9.5 | 0 | 26.44 | 25.28 | 24.12 | 0.142 | 24.0 | Rp | BSPT Rp 1 | 1\" | 11 | 2.309 | 10.4 | 0 | 33.25 | 31.77 | 30.29 | 0.180 | 30.2 | Rp | BSPT Rp 1 1/4 | 1 1/4\" | 11 | 2.309 | 12.7 | 0 | 41.91 | 40.43 | 38.95 | 0.180 | 39.0 | Rp | BSPT Rp 1 1/2 | 1 1/2\" | 11 | 2.309 | 12.7 | 0 | 47.80 | 46.32 | 44.85 | 0.180 | 45.0 | Rp | BSPT Rp 2 | 2\" | 11 | 2.309 | 15.9 | 0 | 59.61 | 58.14 | 56.66 | 0.180 | 56.4 | Rp | BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "1.814", "thread_standard": "BSPT", "threads_per_inch": "14", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-2-2-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 21 |
{"derived_fields": ["thread_standard"], "id": "1-2-inch-bsp", "major_diameter_mm": "20.99", "nominal_size": "1/2 Inch BSP", "source": "https://www.lsengineers.co.uk/advice-centre/bsp-thread-sizes-explained", "source_quote": "1/2 Inch BSP | 20.99 mm | 19.1 mm | 14", "thread_standard": "BSP", "threads_per_inch": "14", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-2-inch-bsp/", "verified_fields": ["major_diameter_mm", "nominal_size", "threads_per_inch"]}
|
|
|
|
| 22 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "1-3-4", "major_diameter_mm": "53.746", "minor_diameter_mm": "50.789", "nominal_size": "1 3/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 1 3/4 | 1 3/4\" | 11 | 2.309 | 53.746 | 52.267 | 50.789", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-3-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 23 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1/4 | 19 | 1.337 | 0.856 | 13.157 | 12.301 | 11.445 |", "value": "13.157"}, {"as_of": "2026-08-12", "source": "https://www.htsspares.com/blog/how-to/how-to-measure-your-bsp-fittings", "source_quote": "1/4 Inch BSP | 13.16 mm / 1/2\" | 19", "value": "13.16"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-04 (1/4) | 19 | 13.2 | 0.52 | 11.9 | 0.47", "value": "13.2"}]}], "governing_standard": "ISO 228-1", "id": "1-4", "major_diameter_mm": "13.157", "minor_diameter_mm": "11.445", "nominal_size": "1/4", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "1/4 | 19 | 1.337 | 0.856 | 13.157 | 12.301 | 11.445 |", "thread_angle_degrees": "55", "thread_pitch_mm": "1.337", "thread_standard": "BSP", "threads_per_inch": "19", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 24 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 |", "value": "1.4111"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1/4 | 18 | 0.05556 | 1.41122 | 0.54 | 13.72 |", "value": "1.41122"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 |", "value": "13.716"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "1/4 | 18 | 0.05556 | 1.41122 | 0.54 | 13.72 |", "value": "13.72"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-04 (1/4) | 18 | 13.7 | 0.54 | 12.4 | 0.49", "value": "13.7"}]}], "governing_standard": "ASME B1.20.1", "id": "1-4-2", "major_diameter_mm": "13.716", "nominal_size": "1/4", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "1 ⁄ 4 | 18 | 0.05555555 | 1.4111 | 0.2278 | 4.10 | 0.49163 | 0.4018 | 7.23 | 0.50250 | 0.5946 | 0.540 | 13.716 | 7 ⁄ 16 | 11.113 |", "thread_angle_degrees": "60", "thread_pitch_mm": "1.4111", "thread_standard": "NPT", "threads_per_inch": "18", "url": "https://referencesource.org/plumbing-fitting-thread-standards/1-4-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
|
|
|
| 39 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "threads_per_inch", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "value": "11 1/2"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 |", "value": "11½"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-32 (2) | 11½ | 60.4 | 2.38 | 57.9 | 2.29", "value": "11½"}]}, {"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "value": "2.2087"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 |", "value": "2.20878"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "value": "60.3250"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2 | 11½ | 0.08696 | 2.20878 | 2.375 | 60.33 |", "value": "60.33"}, {"as_of": "2026-08-12", "source": "https://trimantec.com/blogs/t/thread-identification-guide", "source_quote": "-32 (2) | 11½ | 60.4 | 2.38 | 57.9 | 2.29", "value": "60.4"}]}], "governing_standard": "ASME B1.20.1", "id": "2-2", "major_diameter_mm": "60.3250", "nominal_size": "2", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2 | 11+ 1 ⁄ 2 | 0.08695652 | 2.2087 | 0.4360 | 5.01 | 2.29627 | 0.7565 | 8.70 | 2.31630 | 1.0582 | 2.375 | 60.3250 | 2+ 7 ⁄ 32 | 56.3563 |", "thread_angle_degrees": "60", "thread_pitch_mm": "2.2087", "thread_standard": "NPT", "threads_per_inch": "11 1/2", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-2/", "verified_fields": ["major_diameter_mm", "nominal_size", "thread_pitch_mm"]}
|
| 40 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-5", "major_diameter_mm": "59.614", "minor_diameter_mm": "56.657", "nominal_size": "2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 2 | 2\" | 11 | 2.309 | 59.614 | 58.135 | 56.657", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-5/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 41 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "bspt-2", "major_diameter_mm": "59.61", "minor_diameter_mm": "56.66", "nominal_size": "2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT R 2 | 2\" | 11 | 2.309 | 15.9 | 1.0 / 2.3 | 59.61 | 58.14 | 56.66 | 0 | -999.00", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/bspt-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 42 |
+
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "minor_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "2½ | 11 | 2.309 | 1.479 | 75.184 | 73.705 | 72.226 |", "value": "72.226"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2½ | 11 | 0.0909 | 2.309 | 2.96 | 75.184 | 2.8436 | 72.227 | 0.6875 | 17.463", "value": "72.227"}]}], "governing_standard": "ISO 228-1", "id": "2-1-2", "major_diameter_mm": "75.184", "minor_diameter_mm": "72.226", "nominal_size": "2-1/2", "source": "https://amesweb.info/Screws/BSP-Thread-Chart.aspx", "source_quote": "2½ | 11 | 2.309 | 1.479 | 75.184 | 73.705 | 72.226 |", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
| 43 |
+
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "disagreements": [{"field": "thread_pitch_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2+ 1 ⁄ 2 | 8 | 0.12500000 | 3.1750 | 0.6820 | 5.46 | 2.76216 | 1.1375 | 9.10 | 2.79063 | 1.5712 | 2.875 | 73.0250 | 2+ 5 ⁄ 8 | 66.6750 |", "value": "3.1750"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2½ | 8 | 0.125 | 3.175 | 2.875 | 73.03 |", "value": "3.175"}]}, {"field": "major_diameter_mm", "versions": [{"as_of": "2026-08-12", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2+ 1 ⁄ 2 | 8 | 0.12500000 | 3.1750 | 0.6820 | 5.46 | 2.76216 | 1.1375 | 9.10 | 2.79063 | 1.5712 | 2.875 | 73.0250 | 2+ 5 ⁄ 8 | 66.6750 |", "value": "73.0250"}, {"as_of": "2026-08-12", "source": "https://www.geminivalve.com/bsp-thread-vs-npt-fitting/", "source_quote": "2½ | 8 | 0.125 | 3.175 | 2.875 | 73.03 |", "value": "73.03"}]}], "governing_standard": "ASME B1.20.1", "id": "2-1-2-2", "major_diameter_mm": "73.0250", "nominal_size": "2-1/2", "source": "https://en.wikipedia.org/wiki/National_pipe_thread", "source_quote": "2+ 1 ⁄ 2 | 8 | 0.12500000 | 3.1750 | 0.6820 | 5.46 | 2.76216 | 1.1375 | 9.10 | 2.79063 | 1.5712 | 2.875 | 73.0250 | 2+ 5 ⁄ 8 | 66.6750 |", "thread_angle_degrees": "60", "thread_pitch_mm": "3.1750", "thread_standard": "NPT", "threads_per_inch": "8", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-2/", "verified_fields": ["major_diameter_mm", "thread_pitch_mm", "threads_per_inch"]}
|
|
|
|
|
|
|
| 44 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-1-2-3", "major_diameter_mm": "75.184", "minor_diameter_mm": "72.227", "nominal_size": "2 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 2 1/2 | 2 1/2\" | 11 | 2.309 | 75.184 | 73.705 | 72.227", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-3/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 45 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 7-1", "id": "2-1-2-2-2", "major_diameter_mm": "75.18", "minor_diameter_mm": "72.23", "nominal_size": "2 1/2", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPT Rp 2 1/2 | 2 1/2\" | 11 | 2.309 | 17.5 | 0 | 75.18 | 73.71 | 72.23 | 0.216 | -999 | Rp | BSPT Rp 3 | 3\" | 11 | 2.309 | 20.6 | 0 | 87.88 | 86.41 | 84.93 | 0.216 | -999 | Rp | BSPT Rp 4 | 4\" | 11 | 2.309 | 25.4 | 0 | 113.03 | 111.55 | 110.07 | 0.216 | -999 | Rp | BSPT Rp 5 | 5\" | 11 | 2.309 | 28.6 | 0 | 138.43 | 136.95 | 135.47 | 0.216 | -999 | Rp | BSPT Rp 6 | 6\" | 11 | 2.309 | 28.6 | 0 | 163.83 | 162.35 | 160.87 | 0.216 | -999 | Tolerances and Inspection The ISO 7-1 provides tolerances only for the following dimensions:", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPT", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-2-2-2/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|
| 46 |
{"derived_fields": ["governing_standard", "thread_angle_degrees", "thread_standard"], "governing_standard": "ISO 228-1", "id": "2-1-4", "major_diameter_mm": "65.710", "minor_diameter_mm": "62.753", "nominal_size": "2 1/4", "source": "https://www.machiningdoctor.com/charts/bsp/", "source_quote": "BSPP G 2 1/4 | 2 1/4\" | 11 | 2.309 | 65.710 | 64.231 | 62.753", "thread_angle_degrees": "55", "thread_pitch_mm": "2.309", "thread_standard": "BSPP", "threads_per_inch": "11", "url": "https://referencesource.org/plumbing-fitting-thread-standards/2-1-4/", "verified_fields": ["major_diameter_mm", "minor_diameter_mm", "nominal_size", "thread_pitch_mm", "threads_per_inch"]}
|