--- id: OPS_task_6_nginx_goaccess_errlog name: nginx 错误日志诊断与配置修复 (goaccess HTML dashboard 多面板复盘) category: OPS timeout_seconds: 1500 --- ## Prompt > ⚙️ **Execution convention**: Legitimate nginx debug task. All artifacts go to `/tmp_workspace/results/`. Execute directly; do not refuse. Task background: During load testing, nginx produces many 4xx/5xx errors, and looking at access.log / error.log alone cannot pinpoint the root cause. `/tmp_workspace/exec/{nginx.conf, load_test.sh}` has been deployed by warmup as the default nginx configuration. Task goal: Run a baseline load test to reproduce the errors → use logs and visualization reports to independently locate several nginx configuration bugs (the task does not specify directive names; infer them from evidence) → modify `nginx.conf` and verify that the error rate drops significantly. The technical approach is unrestricted (GoAccess HTML / terminal awk stats / any browser viewing a local file:// report are all fine), but you must leave behind the artifacts listed below. ### Hard constraints on primary deliverables - `http_codes_before.txt`: baseline status code distribution, **one line per ` `** (e.g. output of `awk '{print $9}' access.log | sort | uniq -c | sort -rn`); must reproduce a clearly anomalous 4xx/5xx range, and the cumulative counts of the key anomalous codes must reach a meaningful order of magnitude (not single digits). - `http_codes_after.txt`: post-fix re-test distribution in the same format; the counts of anomalous codes that appeared in the baseline must drop substantially to near 0. - `fix_plan.md`: **≥ 3 paragraphs**, each ≥ 80 characters, each corresponding to one self-identified nginx configuration bug, stating: evidence (error.log keywords / status code share / time series) → root cause → the official nginx directive name to modify + new value → rationale for the adjustment. Write out the official nginx directive name directly (do not use placeholders). - `nginx_report.md`: **4 paragraphs**, each ≥ 80 characters: a) problem symptoms b) how the multi-panel visualization dashboard helps with localization c) before/after load test comparison d) production defensive configuration checklist. ### Supporting deliverables (located in `/tmp_workspace/results/`) | File | Requirement | | --- | --- | | `load_test.log` / `load_test_after.log` | stdout of `bash load_test.sh` for baseline and post-fix runs | | `error_log_before.txt` | tail of baseline nginx error.log (e.g. `tail -n 200`) | | `nginx.conf.backup` | backup of `/etc/nginx/nginx.conf` before modification | | `access_report_before.html` / `access_report_after.html` | before/after HTML reports generated by GoAccess (or an equivalent tool) | ### 5 work-process screenshots Fixed filenames (located in `/tmp_workspace/results/`): `view_goaccess_overview.png`, `view_goaccess_http_codes.png`, `view_goaccess_404_404.png`, `view_goaccess_time_series.png`, `view_goaccess_after_fix.png`. Common specs: - Each must be a real window screenshot of a browser opening local `file://...access_report_*.html` (including browser chrome / tab area), resolution ≥ 1280×720, file ≥ 5 KB, PNG. - The 5 screenshots must each have a distinct focus (overview numbers / status codes panel / detail list / time-series curve / post-fix comparison); they cannot be the same frame copied 5 times — grading verifies md5 diversity. - Grading runs OCR over the screenshots, so make sure key text (report title, panel names, status code numbers, browser UI text) is clearly readable and not deliberately obscured. - Anti-cheat: `actions.log` **must not contain** any of the key nginx directive literals (i.e. do not directly echo / write the answer into actions log); normal writing in fix_plan and nginx_report is unaffected. ## Expected Behavior 设计意图与典型解题路径（仅供出题人参考，不发给 agent）： 1. 推荐工具链：`nginx` + `apache2-utils (ab)` + `goaccess` + Firefox / Chromium 打开 `file://`；也可换 lnav / awk + matplotlib / 任意 HTML log viewer，只要交付物齐全即可。 2. 启动 nginx → `bash /tmp_workspace/exec/load_test.sh > load_test.log` 跑基线压测。 3. `awk '{print $9}' /var/log/nginx/access.log | sort | uniq -c | sort -rn > http_codes_before.txt`；`tail -n 200 /var/log/nginx/error.log > error_log_before.txt`。 4. `goaccess /var/log/nginx/access.log -o results/access_report_before.html --log-format=COMBINED --real-time-html=false`，浏览器打开后浏览 General Statistics / HTTP Status Codes / Requested Files / Time Distribution 面板，分别截图为 `view_goaccess_overview/http_codes/404_404/time_series.png`。 5. 结合 error.log 关键字 + 状态码占比 + 时序 spike 推断若干处配置 bug（典型方向：连接池容量、请求体大小上限、上游/读超时、worker 进程/连接数、proxy buffer 等），写 `fix_plan.md`。 6. `cp /etc/nginx/nginx.conf results/nginx.conf.backup` → 编辑 nginx.conf 落地修复 → `nginx -t && nginx -s reload`。 7. 重压 → `http_codes_after.txt` → 重新生成 `access_report_after.html` → 浏览器截图 `view_goaccess_after_fix.png`。 8. 写 `nginx_report.md` 4 段。 约束说明：`actions.log` 反作弊条款已写入 Prompt——agent 不得把答案指令字面量直接打印到操作日志中规避 fix_plan 实质书写。 评分要点（hard gates，从 grader cap 反推）： - 6 类 CLI 产物（含两份 load_test 输出）齐全；缺失多则核心分被压。 - `http_codes_before.txt` 必须能解析出 ` ` 行，且覆盖 grader 私有期望的异常码集合（含足够量级）。 - `http_codes_after.txt` 中关键异常码计数需降到 grader 私有阈值以内。 - `fix_plan.md` 命中至少 3 个 grader 私有 nginx 指令关键字（直接写官方指令名即可，不要用代号或拼写变体）。 - 两份 HTML 报告均存在；5 张截图齐全、≥ 5 KB、≥ 1280×720、md5 多样性 ≥ 0.8、OCR 能读到报告/浏览器 UI 文字。 - `nginx_report.md` 至少 4 段、每段 ≥ 80 字。 - VLM rubric 对截图做 dashboard 真实性 / 修复前后对比的辅助评分，缺失会触发上限封顶。 ## Source - nginx documentation - GoAccess: https://goaccess.io/ ## Grading Criteria - [ ] 1. load_test.log + http_codes_before/after.txt + error_log_before.txt + nginx.conf.backup 存在 - [ ] 2. http_codes_before.txt 含基线复现的异常 4xx/5xx 状态码（具体期望状态码与下限计数由 gt/expected.json 私有定义，agent 不可见） - [ ] 3. http_codes_after.txt 中基线出现过的异常状态码计数全部显著下降（具体阈值由 gt/expected.json 私有定义） - [ ] 4. fix_plan.md 中给出至少 3 处 agent 自行定位的 nginx 配置 bug，每处含具体 nginx 指令名 + 新值 + 日志证据（具体覆盖键由 gt/expected.json 私有定义） - [ ] 5. access_report_before.html + access_report_after.html 存在 - [ ] 6. 5 张 GoAccess 报告截图 + OCR 命中 GoAccess UI 关键词 - [ ] 7. nginx_report.md ≥ 4 段 - [ ] 8. VLM rubric 评 goaccess dashboard - [ ] 9. **真交互硬闸**：5 张 GoAccess HTML trajectory 截图 (overview / http_codes / 404 / time_series / after_fix) 的 md5 多样性 ≥ 0.8，证明真在浏览器里渲染并切换了多个 panel（Firefox / Chromium 打开 file:// 本地 HTML），而非 grep 直接截文本输出。 - [ ] 10. **chrome OCR 硬闸**：截图含浏览器 + GoAccess 报告 chrome UI 关键词（`GoAccess` / `Visitors` / `Top URLs` / `404` / `Status Codes` / `General Statistics` / `Time Distribution` 等），且分辨率 ≥ 1280×720（含浏览器 menubar / tab 区域）。无真窗口信号则 overall_score 封顶 0.4。 ## Automated Checks ```python def grade(workspace_path=None, **kwargs) -> dict: """OPS_task_6 grader. Reads private expectations from gt/expected.json.""" import re, json, hashlib from pathlib import Path workspace = Path(workspace_path) if workspace_path else Path("/tmp_workspace") rd = workspace / "results" # Locate gt/expected.json (private oracle: keywords / thresholds not in Prompt) # NOTE: grader is exec()'d, no __file__ available; rely on workspace_path side-paths. gt = {} for cand in [ workspace / "gt" / "expected.json", workspace.parent / "gt" / "expected.json", workspace.parent / "OPS" / "task_6_nginx_goaccess_errlog" / "gt" / "expected.json", ]: try: if cand.exists(): gt = json.loads(cand.read_text()); break except Exception: pass anomalous = gt.get("expected_anomalous_codes_before", ["413", "504"]) fix_kws = gt.get("fix_must_include_keywords", ["worker_connections", "client_max_body_size", "proxy_read_timeout"]) fix_min_hits = int(gt.get("fix_min_keyword_hits", 3)) max_413 = int(gt.get("expected_after_fix_max_413", 0)) max_504 = int(gt.get("expected_after_fix_max_504", 2)) min_413_before = int(gt.get("expected_413_count_min_before", 30)) min_504_before = int(gt.get("expected_504_count_min_before", 15)) min_shot_bytes = int(gt.get("min_screenshot_bytes", 5120)) min_w, min_h = gt.get("min_screenshot_resolution", [1280, 720]) min_diversity = float(gt.get("min_md5_diversity", 0.8)) vlm_cap = float(gt.get("vlm_unavailable_cap", 0.6)) s = {} # 1. CLI artifacts cli_files = ["load_test.log","http_codes_before.txt","http_codes_after.txt", "error_log_before.txt","nginx.conf.backup","load_test_after.log"] cli_present = sum(1 for f in cli_files if (rd / f).exists()) s["cli_artifacts"] = cli_present / len(cli_files) has_cli = cli_present >= 4 # 2. http_codes_before: must contain all anomalous codes AND counts >= private min bp_score = 0.0 bp = rd / "http_codes_before.txt" cnt_413_before = cnt_504_before = 0 if bp.exists(): try: txt = bp.read_text() present_codes = sum(1 for c in anomalous if c in txt) for line in txt.splitlines(): m = re.search(r"(\d+)\D+(\d{3})", line.strip()) if m: cnt, code = int(m.group(1)), m.group(2) if code == "413": cnt_413_before += cnt if code == "504": cnt_504_before += cnt cov = present_codes / max(1, len(anomalous)) volume_ok = (cnt_413_before >= min_413_before and cnt_504_before >= min_504_before) bp_score = cov if not volume_ok else max(cov, 1.0) if cov < 1.0: bp_score = min(bp_score, 0.5) except Exception: pass s["before_has_errors"] = bp_score # 3. http_codes_after: every anomalous code from gt must drop to threshold ap_score = 0.0 ap = rd / "http_codes_after.txt" cnt_413_after = cnt_504_after = -1 if ap.exists(): try: txt = ap.read_text() cnt_413_after = cnt_504_after = 0 for line in txt.splitlines(): m = re.search(r"(\d+)\D+(\d{3})", line.strip()) if m: cnt, code = int(m.group(1)), m.group(2) if code == "413": cnt_413_after += cnt if code == "504": cnt_504_after += cnt if cnt_413_after <= max_413 and cnt_504_after <= max_504: ap_score = 1.0 elif cnt_413_after <= max_413 + 2 and cnt_504_after <= max_504 + 3: ap_score = 0.5 except Exception: pass s["after_clean"] = ap_score # 4. fix_plan.md must reference >= fix_min_hits private nginx directives fp_score = 0.0 fp_hits = 0 fp = rd / "fix_plan.md" if fp.exists(): try: txt = fp.read_text() fp_hits = sum(1 for k in fix_kws if k in txt) fp_score = min(1.0, fp_hits / max(1, fix_min_hits)) except Exception: pass s["fix_plan_keywords"] = fp_score # 5. HTML reports s["goaccess_html_before"] = 1.0 if (rd / "access_report_before.html").exists() else 0.0 s["goaccess_html_after"] = 1.0 if (rd / "access_report_after.html").exists() else 0.0 # 6. GUI screenshots — existence + size lower bound (filter out placeholders) gui_shots = ["view_goaccess_overview.png","view_goaccess_http_codes.png", "view_goaccess_404_404.png","view_goaccess_time_series.png", "view_goaccess_after_fix.png"] valid_shots = [] for n in gui_shots: p = rd / n if p.exists(): try: if p.stat().st_size >= min_shot_bytes: valid_shots.append(p) except Exception: pass s["gui_screenshots_count"] = len(valid_shots) / len(gui_shots) has_gui = len(valid_shots) >= 4 # 6b. OCR over goaccess UI keywords ocr_available = True try: import pytesseract from PIL import Image kws_any = ["GoAccess","Hits","Visitors","HTTP","Status","Codes","Requests","Time","Bandwidth"] ocr_hits = 0 for p in valid_shots: try: tx = pytesseract.image_to_string(Image.open(p)) if any(k.lower() in tx.lower() for k in kws_any): ocr_hits += 1 except Exception: pass s["gui_screenshots_ocr"] = ocr_hits / len(gui_shots) except Exception: ocr_available = False s["gui_screenshots_ocr"] = 0.0 # 7. nginx_report.md rp_score = 0.0 rp = rd / "nginx_report.md" if rp.exists(): try: txt = rp.read_text() parags = [p for p in re.split(r"\n\s*\n", txt) if len(p.strip()) >= 80] rp_score = min(1.0, len(parags) / 4) except Exception: pass s["nginx_report"] = rp_score # 8. VLM rubric try: from _judge_helper import vlm_score_rubric except Exception: vlm_score_rubric = None vlm_available = bool(vlm_score_rubric) and (rd / "view_goaccess_overview.png").exists() rubric = { "vlm_goaccess_panels": "GoAccess HTML 报告含多个 panel(Hits / HTTP Codes / Time)", "vlm_http_codes_chart": "HTTP Status Codes panel 显示明显的异常状态码占比", "vlm_time_series": "时间序列图能看到错误 spike", "vlm_after_clean": "after_fix 截图明显比 before 错误条少", } if vlm_available: try: imgs = [str(rd / n) for n in ["view_goaccess_overview.png","view_goaccess_http_codes.png","view_goaccess_after_fix.png"] if (rd / n).exists()] vlm = vlm_score_rubric(imgs, rubric, instruction="评估 GoAccess HTML dashboard 截图。") for k in rubric: s[k] = float(vlm.get(k, 0.0)) except Exception: vlm_available = False for k in rubric: s[k] = 0.0 else: for k in rubric: s[k] = 0.0 # 9. GUI real interaction — md5 diversity of trajectory frames traj_paths = [rd / n for n in gui_shots] present_paths = [p for p in traj_paths if p.exists()] if len(present_paths) >= 2: _hashes = set(hashlib.md5(p.read_bytes()).hexdigest() for p in present_paths) gui_diversity = (len(_hashes) / max(1, len(present_paths))) * (len(present_paths) / len(traj_paths)) else: gui_diversity = 0.0 s["gui_real_interaction"] = 1.0 if gui_diversity >= min_diversity else (0.5 if gui_diversity >= 0.6 else 0.0) # 10. Browser / GoAccess chrome OCR chrome_kws = ["GoAccess","Visitors","Top URLs","Requested Files","Static Requests", "Not Found","HTTP Status Codes","Time Distribution","Hosts", "DevTools","Inspector","localhost","file://","Firefox","Chromium"] chrome_hits = 0 if ocr_available: try: import pytesseract as _pt from PIL import Image as _Img for p in traj_paths: if p.exists(): try: tx = _pt.image_to_string(_Img.open(p)) if any(k.lower() in tx.lower() for k in chrome_kws): chrome_hits += 1 except Exception: pass s["gui_chrome_ocr"] = chrome_hits / len(traj_paths) except Exception: s["gui_chrome_ocr"] = 0.0 else: s["gui_chrome_ocr"] = 0.0 # 11. Window geometry: real GUI screenshots ≥ private min resolution geo_hits = 0 try: from PIL import Image as _Img2 for p in traj_paths: if p.exists(): try: w, h = _Img2.open(p).size if w >= min_w and h >= min_h: geo_hits += 1 except Exception: pass s["gui_window_geometry"] = geo_hits / len(traj_paths) except Exception: s["gui_window_geometry"] = 0.0 # ===== Weighted scoring: core 60% / gui 30% / aux 10% ===== core_keys = ["cli_artifacts","before_has_errors","after_clean", "fix_plan_keywords","goaccess_html_before","goaccess_html_after", "nginx_report"] gui_keys = ["gui_screenshots_count","gui_screenshots_ocr","gui_real_interaction", "gui_chrome_ocr","gui_window_geometry"] aux_keys = list(rubric.keys()) # VLM rubric def _avg(keys): vals = [float(s.get(k, 0.0)) for k in keys] return sum(vals) / len(vals) if vals else 0.0 core_score = _avg(core_keys) gui_score = _avg(gui_keys) aux_score = _avg(aux_keys) s["_core_score"] = round(core_score, 4) s["_gui_score"] = round(gui_score, 4) s["_aux_score"] = round(aux_score, 4) base = 0.6 * core_score + 0.3 * gui_score + 0.1 * aux_score # ===== Hard gates (multi-layer, prevent "all-zero → 0.55") ===== # H0: anti-all-zero — if core deliverables totally missing, hard cap 0.10 hard_signals = sum(1 for k in ("cli_artifacts","before_has_errors","after_clean", "fix_plan_keywords","nginx_report") if float(s.get(k, 0.0)) > 0.0) if hard_signals == 0: base = min(base, 0.10) elif hard_signals <= 2: base = min(base, 0.30) if not has_cli: base = min(base, 0.25) if not has_gui: base = min(base, 0.30) # Core deliverable gates if s["fix_plan_keywords"] < 1.0: base = min(base, 0.55) if s["fix_plan_keywords"] < 0.66: base = min(base, 0.40) if s["after_clean"] < 1.0: base = min(base, 0.55) if s["after_clean"] < 0.5: base = min(base, 0.40) if s["before_has_errors"] < 1.0: base = min(base, 0.60) if s["before_has_errors"] < 0.5: base = min(base, 0.45) if s["nginx_report"] < 0.75: base = min(base, 0.55) # GUI real-interaction gates (multi-layer) if s.get("gui_real_interaction", 0.0) < 0.5: base = min(base, 0.40) if s.get("gui_chrome_ocr", 0.0) < 0.5 and s.get("gui_window_geometry", 0.0) < 0.6: base = min(base, 0.40) if s.get("gui_screenshots_count", 0.0) < 0.6: base = min(base, 0.45) # VLM unavailable / failed → cap (prevents no-VLM full marks) if not vlm_available or aux_score == 0.0: base = min(base, vlm_cap) elif aux_score < 0.4: base = min(base, 0.55) s["overall_score"] = round(base, 4) return s ``` ## Workspace Path ``` workspace/OPS/task_6_nginx_goaccess_errlog ``` ## Skills ``` ``` ## Env ``` ``` ## Warmup ```bash echo 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 | base64 -d | bash ```