id string | model string | domain string | card string | tool string | specimen string | base string | input string | input_unit string | whole_number_input bool | base_value float64 | edge_kind string | direction string | inside_value float64 | inside_value_hex string | outside_value float64 | outside_value_hex string | width float64 | adjacent_64_bit_numbers bool | stop_name string | stop_sentence string | stop_where string | flip string | inside_outcome string | outside_outcome string | inside_steps_landed int64 | outside_steps_landed int64 | proof_kind string | inside_proof string | outside_proof string | inside_receipt string | outside_receipt string | engine_version string | address string | asked_utc string | date string | inside_request string | inside_answer string | outside_request string | outside_answer string | outside_answer_is_error bool |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
edge-9ba4195d9db8 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_mass_kg | kg | false | 0.02747 | declared_limit | down | 0.013639 | 3f8beec39799e519 | 0.013639 | 3f8beec39799e518 | 0 | true | GasMassOutsideCard | Physical Failure: 'gas_mass_kg' 0.013638999999999998 kg is below 0.013639 kg, the inclusive minimum of the accumulator_sbo450 card (GasMassOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 580f9bd38268c549bf98952ff0e89b428e3cedfcaf34480fcbf31c7f036979c4 | null | ccf7c3dea8082d92e40010e1dc34ea47281b5791a05dadd8dae489a18e409b40 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:44Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.013639, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.013639,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.013638999999999998, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record... | Physical Failure: 'gas_mass_kg' 0.013638999999999998 kg is below 0.013639 kg, the inclusive minimum of the accumulator_sbo450 card (GasMassOutsideCard). That state is not sealed. | true |
edge-1664222fac7d | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_mass_kg | kg | false | 0.02747 | declared_limit | up | 0.013667 | 3f8bfd71b0468449 | 0.013667 | 3f8bfd71b046844a | 0 | true | GasMassOutsideCard | Physical Failure: the gas mass is neither of the two charges measured: 0.013639 to 0.013667 kg, a precharge of 20 bar, or 0.02744 to 0.027495 kg, a precharge of 40 bar (GasMassOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 4fd82d6d2b18a5b0f79093254b9f1929dd58cc131d2877462c913675ed8790df | null | f4634cae4313a3622bb89044f7ed411f7c1895b4f8afa2829234d520a407f992 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:46Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.013667, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.013667,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.013667000000000002, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record... | Physical Failure: the gas mass is neither of the two charges measured: 0.013639 to 0.013667 kg, a precharge of 20 bar, or 0.02744 to 0.027495 kg, a precharge of 40 bar (GasMassOutsideCard). That state is not sealed. | true |
edge-597bbbdea673 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_mass_kg | kg | false | 0.02747 | declared_limit | down | 0.02744 | 3f9c193b3a68b19a | 0.02744 | 3f9c193b3a68b199 | 0 | true | GasMassOutsideCard | Physical Failure: the gas mass is neither of the two charges measured: 0.013639 to 0.013667 kg, a precharge of 20 bar, or 0.02744 to 0.027495 kg, a precharge of 40 bar (GasMassOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 206ec423b51b20efa5fc54f1c175e197eb0cb5050c4fdeeb60eab9bde2dc3bb4 | null | f289bf3905d5f9b48946375058dde124f11ec3a35c7465e32799f0ca2298cb83 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:48Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02744, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02744,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version":... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.027439999999999996, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record... | Physical Failure: the gas mass is neither of the two charges measured: 0.013639 to 0.013667 kg, a precharge of 20 bar, or 0.02744 to 0.027495 kg, a precharge of 40 bar (GasMassOutsideCard). That state is not sealed. | true |
edge-a16e0dd9b45d | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_mass_kg | kg | false | 0.02747 | declared_limit | up | 0.027495 | 3f9c27a63736cdf2 | 0.027495 | 3f9c27a63736cdf3 | 0 | true | GasMassOutsideCard | Physical Failure: 'gas_mass_kg' 0.027495000000000002 kg is above 0.027495 kg, the inclusive maximum of the accumulator_sbo450 card (GasMassOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 34a8547701ac2c268616a444e6424652a5eddcdcbe7813c5e7e6f47bf3109e83 | null | 83bb34259b6eb6642160490804c7ccfb73e1154894f5f70962ccf7e1b7b3e5db | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:49Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.027495, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.027495,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.027495000000000002, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record... | Physical Failure: 'gas_mass_kg' 0.027495000000000002 kg is above 0.027495 kg, the inclusive maximum of the accumulator_sbo450 card (GasMassOutsideCard). That state is not sealed. | true |
edge-f52ccc7bcc3e | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_pressure_pa | Pa | false | 6,000,000 | declared_limit | down | 5,700,000 | 4155be6800000000 | 5,700,000 | 4155be67ffffffff | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 5ed324cc2dbc0975b6d8b72cda4553e03edd92c52ce5155107691ed5a8d87ea8 | null | 5a6ed5990cbbc511bd13a65a571ab382088bde5785530181497a3d70ccb4afc9 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:51Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 5700000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":5700000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version":... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 5699999.999999999, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_ever... | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). That state is not sealed. | true |
edge-fdd211513244 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_pressure_pa | Pa | false | 6,000,000 | declared_limit | up | 6,249,151.305913 | 4157d6afd394151e | 6,249,151.305913 | 4157d6afd394151f | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 39. The state at st... | part way | null | completed | refused | 40 | 39 | run_seal | 7086306a07f6d6e66bc76c111264ca00efd172b79a48724b9d8430fb2c1d85f0 | 44083b3b5f6c06837eaaa84c0f881b08787b4af2f2599104dbfefaab575b83c2 | b7c43507002f82805eedcf47fc82fdfcd839e3caa96b7e124c3ce21bc311fcea | e2618e70bff7a77802db47b09b342a084fe2b882dcfd23caebd81d973c5ad330 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:53Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6249151.305913238, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_ever... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6249151.305913238,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_v... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6249151.305913239, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_ever... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6249151.305913239,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_v... | false |
edge-0fe0874b533f | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_pressure_pa | Pa | false | 6,000,000 | declared_limit | down | 7,500,000 | 415c9c3800000000 | 7,500,000 | 415c9c37ffffffff | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 4726c24d4a4ac7aaf301de4e2d6869b07965fd01f3b870934140f9183d2e361f | null | b0138f09e3cf873edfd4dc8f54a08e5bd4e5343b15a0105eb69a3206bc9819bb | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:55Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 7500000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":7500000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version":... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 7499999.999999999, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_ever... | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). That state is not sealed. | true |
edge-74b83e0e1b7a | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_pressure_pa | Pa | false | 6,000,000 | declared_limit | up | 8,322,141.935593 | 415fbf177be0c30d | 8,322,141.935593 | 415fbf177be0c30e | 0 | true | PressureOutsideCard | Physical Failure: the gas pressure, incoming or landing, is below 37 bar or above 86 bar (PressureOutsideCard). The run is sealed to step 39. The state at step 40 was refused and is not sealed. | part way | null | completed | refused | 40 | 39 | run_seal | a7b5f5a18679d7337c499cf5642f6b11a4f348fc4c63117e6e89f2e5ba77db94 | c3eaaf7c4e3f828746dc16e0bc349e2e239214e4550c985aed12dbec3015e778 | 7a988caa834cded381edd4be5ef2e8af175cec4768120ea0a1772252eb6b1752 | 118fe59916867fe50245b96c2c8e32b90b115ec306de7f15d84ecaa582db6e33 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:56Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 8322141.935593379, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_ever... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":8322141.935593379,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_v... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 8322141.93559338, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":8322141.93559338,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_ve... | false |
edge-9a9632de0ed3 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_temperature_k | K | false | 293.15 | declared_limit | down | 285.9 | 4071de6666666666 | 285.9 | 4071de6666666665 | 0 | true | GasTemperatureOutsideCard | Physical Failure: 'gas_temperature_k' 285.8999999999999 K is below 285.9 K, the inclusive minimum of the accumulator_sbo450 card (GasTemperatureOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 167389695a5d826daff663fd89437425046422be0db3c68828ccd3ec568a51f0 | null | 57a6064a7dc487f410ae0be59e11aa3577be60eb38c3867a21140027e7651fd5 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:19:58Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 285.9, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":285.9,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version":"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 285.8999999999999, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_e... | Physical Failure: 'gas_temperature_k' 285.8999999999999 K is below 285.9 K, the inclusive minimum of the accumulator_sbo450 card (GasTemperatureOutsideCard). That state is not sealed. | true |
edge-be1b68e1c3b4 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.gas_temperature_k | K | false | 293.15 | declared_limit | up | 299.885601 | 4072be2b6b8f52fb | 299.885601 | 4072be2b6b8f52fc | 0 | true | GasTemperatureOutsideCard | Physical Failure: the gas temperature, incoming or landing, is below 285.9 K or above 301.8 K: no other gas temperature was compared with measurement (GasTemperatureOutsideCard). The run is sealed to step 39. The state at step 40 was refused and is not sealed. | part way | null | completed | refused | 40 | 39 | run_seal | 4f3ba56bc06e8b6e1bfa990b35faececcf590048ac5443f4f366049f50b94045 | b6afb61f8e56014da8764f2357247cf2bc84f0d4b6f024302edffc420c0307d6 | eb432397c6bd67fb49c3aa929b8bd3fabe4c0dac2b4c76120fa48de4e4c9d615 | 59dab4b5944c44713ae6357ae19f146b378e6bae7d825c6e8dd82a968048972a | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:00Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 299.8856006239509, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_e... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":299.8856006239509,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engin... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 299.88560062395095, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":299.88560062395095,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engi... | false |
edge-ccddc4fe7591 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.wall_temperature_k | K | false | 293.55 | declared_limit | down | 293.4 | 4072566666666666 | 293.4 | 4072566666666665 | 0 | true | WallTemperatureOutsideCard | Physical Failure: 'wall_temperature_k' 293.3999999999999 K is below 293.4 K, the inclusive minimum of the accumulator_sbo450 card (WallTemperatureOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 18731dd01e165a1cd28bc71e4627c1b415b88511aad737163b90d67d95227b3e | null | 26e31b819bb81cd49014b1b0e0326409131d35c3a048030e93e62cf8dbedf05e | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:02Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.4, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.4,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version":"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.3999999999999, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_e... | Physical Failure: 'wall_temperature_k' 293.3999999999999 K is below 293.4 K, the inclusive minimum of the accumulator_sbo450 card (WallTemperatureOutsideCard). That state is not sealed. | true |
edge-50b8c74419bc | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | initial.wall_temperature_k | K | false | 293.55 | declared_limit | up | 293.7 | 40725b3333333333 | 293.7 | 40725b3333333334 | 0 | true | WallTemperatureOutsideCard | Physical Failure: 'wall_temperature_k' 293.70000000000005 K is above 293.7 K, the inclusive maximum of the accumulator_sbo450 card (WallTemperatureOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 40 | null | run_seal | 4527257b70e6ff957f8824cff99b27ca865b7d803718ede066b03af126cf3d6f | null | 1013c8b277382257bc4b7ef69f4784078756c9e7b2bf0cf3b2ad1b7bb8301f69 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:04Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.7, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.7,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version":"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.70000000000005, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record_... | Physical Failure: 'wall_temperature_k' 293.70000000000005 K is above 293.7 K, the inclusive maximum of the accumulator_sbo450 card (WallTemperatureOutsideCard). That state is not sealed. | true |
edge-a77f2ba0b84b | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | dt_s | s | false | 0.0025 | declared_limit | down | 0 | 3e966cf41f212d77 | 0 | 3e966cf41f212d76 | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 3.3416748046874994e-7 is below 3.3416748046875e-7 s, the step floor of the accumulator_sbo450 card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 40 | null | run_seal | dec933a4481ab46e5e03d1851fdad113ed6dfe0b395d0a57a926e4fbc7556c28 | null | b6be378760b450df9d4332d51ed7ec728c3feb8e377b8d3f783a01c78142ee88 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:05Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 3.3416748046875e-07, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "record... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":3.3416748046875e-7,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engi... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 3.3416748046874994e-07, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "rec... | Physical Violation: 'dt_s' 3.3416748046874994e-7 is below 3.3416748046875e-7 s, the step floor of the accumulator_sbo450 card (DtBelowFloor). | true |
edge-da212b930232 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | dt_s | s | false | 0.0025 | declared_limit | up | 0.00698 | 3f7c96f1726bcb26 | 0.00698 | 3f7c96f1726bcb27 | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 39. The state at st... | part way | null | completed | refused | 40 | 39 | run_seal | bab8e7de6143fe286394887eede6d37a7131cd9d90c3244fb35df7be83153536 | 69b496e79cec5505ff4cfa5cb72290db5eb93a32374f3ea0c128a5643267add0 | 7cb48fb5777badd8c0d41b5ab29e8edfa9ddf8d4ae55e9379a72e7c8f3e21f2d | 1c7cba624bb02158819b3dcc9c1aabdf2636a98854db1a6216f281746c3a03b7 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:07Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.006979888107468557, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "recor... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.006979888107468557,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"en... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0069798881074685576, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.03}}], "reco... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0069798881074685576,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"e... | false |
edge-d0b3dec5fd17 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | segments[0].steps | steps | true | 40 | declared_limit | up | 111 | 405bc00000000000 | 112 | 405c000000000000 | 1 | false | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 111. The state at s... | part way | null | completed | refused | 111 | 111 | run_seal | 1b89ca4177a456cb59bbe9237e3b58c76b5d0708e30c317c2a12eb720d54217f | 09f73291a7f467122496874f248c2ef5ac65a6f763febcac9ff983785d8636b6 | b440c0d91c7e52100b631bea07636fa4a3ccf24842cc522354099c48dbcf20ad | 905d27afb64d6de39bf3e7fd8ed76dc1afd4890441ff754f8408ce5ba59d91c6 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:09Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 111, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":111,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 112, "load": {"piston_speed_m_s": 0.03}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":112,"load":{"piston_speed_m_s":0.03}}],"record_every":1},"engine_version"... | false |
edge-6404255bb988 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | segments[0].load.piston_speed_m_s | m/s | false | 0.03 | declared_limit | down | -0.06934 | bfb1c049197d2bed | -0.06934 | bfb1c049197d2bee | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 39. The state at st... | part way | null | completed | refused | 40 | 39 | run_seal | 4351b47b3ee126753753ccb947e173b3f8d9ee8c718f259a48629eb9a7464cf6 | 37d1294f9f1b89c9f38d98fda73991cd8199398785862ebbbe002655b0784314 | 8eade3cdd69e6a95397e8181465ad28c061924bc4a1a490f2fa0b17f7a5e7abd | b91d2b1ab0b3a5b7cc85ea543f1409ea0a13076f4aa9367971e9323f7b9b270e | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:11Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": -0.06934029457367759}}], "rec... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":-0.06934029457367759}}],"record_every":1},"... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": -0.0693402945736776}}], "reco... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":-0.0693402945736776}}],"record_every":1},"e... | false |
edge-ec6f0b6f8449 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory | segments[0].load.piston_speed_m_s | m/s | false | 0.03 | declared_limit | up | 0.083643 | 3fb5699fd0ef3042 | 0.083643 | 3fb5699fd0ef3043 | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 39. The state at st... | part way | null | completed | refused | 40 | 39 | run_seal | 9e060df6a91c4790988ff25b4f4012df3136daa9cba5b579db0ac49fac655de6 | 8d36c8e71109c27631b130a44806ca4a5f1a109fab7c45f8934d21d142a1dcf7 | b1ce6fb6ebc62c1482970d12dd013ea3b188bbd0aa9a5081dce7d7b9b8b58991 | ddd8a45a5db17c7e35a8e63fa25b6728a1512c35734e4daa26e8e4c2e2b723cc | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:12Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.08364294863639635}}], "reco... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.08364294863639635}}],"record_every":1},"e... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 40, "load": {"piston_speed_m_s": 0.08364294863639636}}], "reco... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":40,"load":{"piston_speed_m_s":0.08364294863639636}}],"record_every":1},"e... | false |
edge-8ab56d2787a4 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.piston_speed_m_s | m/s | false | 0.03 | declared_limit | down | -0.168584 | bfc5942b8e6d298b | -0.168584 | bfc5942b8e6d298c | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 39. The state at st... | part way | null | completed | refused | 40 | 39 | run_seal | d3b16e4eb8f81545415890367f64f93ffb2c467ae380be738224dece11a927fc | f84877254ea5f0750c0f9e4dc442b176fc0973cd50202433305ca960d9ac8e0c | 94da3c984b9684b4980228b5547c77a2e41dc76bc749358c4f857f51324aff3a | 25e68f1954629a965535b12a5d08aad0329f82b3322fe8514e8e807f342bd54f | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:14Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 20, "load": {"piston_speed_m_s": 0.03}}, {"steps": 20, "load":... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":20,"load":{"piston_speed_m_s":0.03}},{"steps":20,"load":{"piston_speed_m_... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 20, "load": {"piston_speed_m_s": 0.03}}, {"steps": 20, "load":... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":20,"load":{"piston_speed_m_s":0.03}},{"steps":20,"load":{"piston_speed_m_... | false |
edge-b63e9dac0547 | energy/accumulator_sbo450 | energy | accumulator_sbo450 | run_trajectory | The nitrogen charge of one HYDAC SBO450-0.6 diaphragm accumulator on the test rig at TU Darmstadt, as a piston pushes oil in and draws it out: gas pressure, temperature and an energy ledger. The ratio of piston area to vessel volume and the thermal time constant are fitted to this accumulator's own runs at 40 bar prech... | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.piston_speed_m_s | m/s | false | 0.03 | declared_limit | up | 0.137237 | 3fc190fd94e2e442 | 0.137237 | 3fc190fd94e2e443 | 0 | true | PressureOutsideChargeBands | Physical Failure: the gas pressure, incoming or landing, is inside 37 to 86 bar and outside the bands compared with measurement for the charge given: 37 to 43 or 55 to 67 bar for the 20 bar charge, 57 to 64 or 75 to 86 bar for the 40 bar charge (PressureOutsideChargeBands). The run is sealed to step 39. The state at st... | part way | null | completed | refused | 40 | 39 | run_seal | 48ec7541f2f9ef178b3e109ff3b85aad80642146ed9bd6561a982ccc3d574283 | 2c4ce19fe22ee724f7e8eecd50378634349461196dcea3d309d1f6591dc20453 | d2664bce966746b5ad35246c481f950f135c03ce82d95eb11aaadda7fe39c34d | d95a67ec8973e887e1cec215ebdaca57c1febdf18623b888d3d5721ad23f8b61 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:16Z | 2026-10-14 | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 20, "load": {"piston_speed_m_s": 0.03}}, {"steps": 20, "load":... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":20,"load":{"piston_speed_m_s":0.03}},{"steps":20,"load":{"piston_speed_m_... | {"domain": "energy", "card": "accumulator_sbo450", "initial": {"gas_mass_kg": 0.02747, "gas_pressure_pa": 6000000.0, "gas_temperature_k": 293.15, "wall_temperature_k": 293.55, "work_moved_j": 0.0, "heat_moved_j": 0.0}, "dt_s": 0.0025, "segments": [{"steps": 20, "load": {"piston_speed_m_s": 0.03}}, {"steps": 20, "load":... | {"inputs":{"domain":"energy","card":"accumulator_sbo450","initial":{"gas_mass_kg":0.02747,"gas_pressure_pa":6000000.0,"gas_temperature_k":293.15,"wall_temperature_k":293.55,"work_moved_j":0.0,"heat_moved_j":0.0},"dt_s":0.0025,"segments":[{"steps":20,"load":{"piston_speed_m_s":0.03}},{"steps":20,"load":{"piston_speed_m_... | false |
edge-2eb105c6e5f2 | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory | initial.soc | 1 | false | 1 | declared_limit | down | 0 | 3cb1c71c71c71c73 | 0 | 3cb1c71c71c71c72 | 0 | true | UndervoltageCutoff | Physical Failure: 'soc' 2.4671622769447924e-16 is below 2.467162276944793e-16, the inclusive minimum of the battery_sag card (UndervoltageCutoff). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | db0a2e263fb3264a0af93c342caea93147dc5318d430e1d7d095c1dcd5cad038 | null | 0dac3d650d4de186c35ee6c47255066c975a27366d7dc4a003b172377bb5dd56 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:18Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 2.467162276944793e-16}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":2.467162276944793e-16},"dt_s":6.600000000000001,"segments":[{"steps":4,"load":{"current_a":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"f... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 2.4671622769447924e-16}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | Physical Failure: 'soc' 2.4671622769447924e-16 is below 2.467162276944793e-16, the inclusive minimum of the battery_sag card (UndervoltageCutoff). That state is not sealed. | true |
edge-41ee2c662fd9 | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory | initial.soc | 1 | false | 1 | outcome_flip | down | 0.416667 | 3fdaaaaaaaaaaaa7 | 0.416667 | 3fdaaaaaaaaaaaa6 | 0 | true | null | null | null | {"sag_warning": [false, true]} | completed | completed | 4 | 4 | run_seal | 9c3dfc68e497843cd31649f32a049af786c46a46ad0ac4c7e12cf68b781390e1 | 3d142e704a4e72d6c60a66173f679895b77ad49d6956d795763f284d91296e4f | bffb2f5fe9ce1a40ab5fb65508cebba27d2bf2d155ec5ae66a16452a30bc42f4 | de57575db450a310ed5607e971a86090e84d9ec9022c79a917c402e0f71bc6fa | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:19Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 0.41666666666666646}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":0.41666666666666646},"dt_s":6.600000000000001,"segments":[{"steps":4,"load":{"current_a":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"fin... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 0.4166666666666664}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":0.4166666666666664},"dt_s":6.600000000000001,"segments":[{"steps":4,"load":{"current_a":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"fina... | false |
edge-f26fd9f83383 | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory | initial.soc | 1 | false | 1 | declared_limit | up | 1 | 3ff0000000000000 | 1 | 3ff0000000000001 | 0 | true | StateOfChargeOutsideCard | Physical Failure: 'soc' 1.0000000000000002 is above 1, the inclusive maximum of the battery_sag card (StateOfChargeOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 61b428cc10f79010ee46d477fb3a6f5560aba03d7f533f6d89d5fc9effd715f9 | null | 926463633aa818a1801a783d0ca22c6faa1d2dc7171a8cd3efc8b2001f6589fc | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:21Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":1.0},"dt_s":6.600000000000001,"segments":[{"steps":4,"load":{"current_a":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final_state":{"t_s"... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0000000000000002}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | Physical Failure: 'soc' 1.0000000000000002 is above 1, the inclusive maximum of the battery_sag card (StateOfChargeOutsideCard). That state is not sealed. | true |
edge-eb036982cfd8 | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory | dt_s | s | false | 6.6 | declared_limit | down | 0.000006 | 3eda666666666668 | 0.000006 | 3eda666666666667 | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 6.2942504882812505e-6 is below 6.294250488281251e-6 s, the step floor of the battery_sag card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 0dc5ab96015b6091efaad3c08f653a633952277fbb2553d94731f8e5d39097d8 | null | 59bbe45ee0e2933af6924198c6568942df3929e066cab86d214b14dbb54b6bf5 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:23Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.294250488281251e-06, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":1.0},"dt_s":6.294250488281251e-6,"segments":[{"steps":4,"load":{"current_a":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final_state":{"t... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.2942504882812505e-06, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | Physical Violation: 'dt_s' 6.2942504882812505e-6 is below 6.294250488281251e-6 s, the step floor of the battery_sag card (DtBelowFloor). | true |
edge-642bba66e238 | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory | dt_s | s | false | 6.6 | declared_limit | up | 6.6 | 401a666666666668 | 6.6 | 401a666666666669 | 0 | true | DtAboveCeiling | Physical Violation: 'dt_s' 6.600000000000002 is above 6.600000000000001 s, the step ceiling of the battery_sag card (DtAboveCeiling). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 61b428cc10f79010ee46d477fb3a6f5560aba03d7f533f6d89d5fc9effd715f9 | null | 926463633aa818a1801a783d0ca22c6faa1d2dc7171a8cd3efc8b2001f6589fc | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:21Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":1.0},"dt_s":6.600000000000001,"segments":[{"steps":4,"load":{"current_a":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final_state":{"t_s"... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000002, "segments": [{"steps": 4, "load": {"current_a": 0.0}}], "record_every": 1} | Physical Violation: 'dt_s' 6.600000000000002 is above 6.600000000000001 s, the step ceiling of the battery_sag card (DtAboveCeiling). | true |
edge-79c68974710b | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory | segments[0].load.current_a | A | false | 0 | declared_limit | up | 36.363636 | 40422e8ba2e8ba2d | 36.363636 | 40422e8ba2e8ba2e | 0 | true | CurrentAboveNyquist | Physical Violation: 'current_a' 36.36363636363636 is larger in size than 36.36363636363635, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |current_a| * dt_s may not exceed the card's impulse limit 239.99999999999997) (CurrentAboveNyquist). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | b63620b9aeb06b308b8af85729ee525e9d86c2483f98ad77e55696a08c812e2b | null | 738806d91350db526479873763f2f23e4697411c18475a2062c4299e2482d74d | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:25Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 36.36363636363635}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":1.0},"dt_s":6.600000000000001,"segments":[{"steps":4,"load":{"current_a":36.36363636363635}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000001, "segments": [{"steps": 4, "load": {"current_a": 36.36363636363636}}], "record_every": 1} | Physical Violation: 'current_a' 36.36363636363636 is larger in size than 36.36363636363635, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |current_a| * dt_s may not exceed the card's impulse limit 239.99999999999997) (CurrentAboveNyquist). | true |
edge-117c3b38b660 | energy/battery_sag | energy | battery_sag | run_trajectory | A 12S lithium-ion pack under a terminal current. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.current_a | A | false | 0 | declared_limit | up | 36.363636 | 40422e8ba2e8ba2d | 36.363636 | 40422e8ba2e8ba2e | 0 | true | CurrentAboveNyquist | Physical Violation: 'current_a' 36.36363636363636 is larger in size than 36.36363636363635, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |current_a| * dt_s may not exceed the card's impulse limit 239.99999999999997) (CurrentAboveNyquist). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | ec943c6d1f372b0c3fcc10b0e737e2dc4bc26de36bff4fce2aa24c315ce1191a | null | 9c034aa6cf016e3b2cbce79900abb1862832475e81dc7052f8408e993712d543 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:27Z | 2026-10-14 | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000001, "segments": [{"steps": 2, "load": {"current_a": 0.0}}, {"steps": 2, "load": {"current_a": 36.36363636363635}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"battery_sag","initial":{"soc":1.0},"dt_s":6.600000000000001,"segments":[{"steps":2,"load":{"current_a":0.0}},{"steps":2,"load":{"current_a":36.36363636363635}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"rej... | {"domain": "energy", "card": "battery_sag", "initial": {"soc": 1.0}, "dt_s": 6.600000000000001, "segments": [{"steps": 2, "load": {"current_a": 0.0}}, {"steps": 2, "load": {"current_a": 36.36363636363636}}], "record_every": 1} | Physical Violation: 'current_a' 36.36363636363636 is larger in size than 36.36363636363635, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |current_a| * dt_s may not exceed the card's impulse limit 239.99999999999997) (CurrentAboveNyquist). | true |
edge-c71e86671ddb | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.elongation_m | m | false | 0 | declared_limit | down | 0 | 00100d229d7d071c | 0 | 00100d229d7d071b | 0 | true | SubnormalState | Physical Violation: cable_stretch step refused (SubnormalState): The incoming state, or the landing, has a subnormal elongation or velocity. The run is sealed to step 3. The state at step 4 was refused and is not sealed. | part way | null | completed | refused | 4 | 3 | run_seal | 2e932fc41cecac651cf09d8f73d4fb20c89eb9cd8e62c02dada600f7201693ca | 973b5aaab7d99094da53af2584595cada521f8d06d45563c94687a1c5ff929ac | 4a6fee3d99c9c1c4facd7488acb67c7e55265c53484456b0364f4a95aaf6df14 | 87d5c6af56da4a9a2103cf6738a1393f51399c9863104ce330013d054f19bd1c | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:29Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 2.232209313784943e-308, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":2.232209313784943e-308,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 2.2322093137849423e-308, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":2.2322093137849423e-308,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4,"steps_landed":3,"r... | false |
edge-666c18fcce25 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.elongation_m | m | false | 0 | outcome_flip | up | 0.002006 | 3f606fc124571185 | 0.002006 | 3f606fc124571186 | 0 | true | null | null | null | {"tracking_degraded": [false, true]} | completed | completed | 4 | 4 | run_seal | 5ec6bd77284dfdbd87249c269a5bff873eafd428d0313c292af50384167129aa | 7e6a7655b720564e4d103f3efeb69e221a582cd46c7db0c38837d8e4e8f890a2 | 5fc2584e7938abba70a84ca88b03f32eb3931b222ff885b24abb9ad813946c33 | def453e13cd86509b3848d52f46ed01e4c4eb8bb9d5961ce21df70cb35cdf29c | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:31Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0020064136794834563, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0020064136794834563,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"r... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0020064136794834568, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0020064136794834568,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"r... | false |
edge-717cd9c6d442 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.elongation_m | m | false | 0 | outcome_flip | up | 0.005016 | 3f748bb16d6cd5e7 | 0.005016 | 3f748bb16d6cd5e8 | 0 | true | null | null | null | {"control_limited": [false, true]} | completed | completed | 4 | 4 | run_seal | 6ce7936a227ac4daaaf1e19d9c6bccb6f866308078ba0cc2554d99d53a37fc0b | 5e8de690280a3a11920473d38313038a04fbdd8e39b0f50ebcad3f49aba501cd | a34a3d86d95847a846dfbafbc10a932a8a5e7315762f9bd223f412e22ba4669b | 3d43beb05c0f8e827030988657285f67168393ebbc9bf965b47daa69d4bad4f9 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:32Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0050160341987086415, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0050160341987086415,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"r... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.005016034198708642, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.005016034198708642,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"re... | false |
edge-efe5429a0856 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.elongation_m | m | false | 0 | declared_limit | up | 0.028 | 3f9cac083126e976 | 0.028 | 3f9cac083126e977 | 0 | true | TensileFailure | Physical Failure: 'elongation_m' 0.027999999999999994 m is at or above 0.027999999999999994 m, the exclusive maximum of the cable_stretch card (TensileFailure). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 7abfe0af29bb72c8619e57d0e3adaee6fbbe9f780bde82561fc685ad1780b285 | null | 744bed1a0fad400e29dedf014a032eb76fcbf54d9eb5ac803b09480b1b53f7dc | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:34Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.02799999999999999, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.02799999999999999,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"rej... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.027999999999999994, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | Physical Failure: 'elongation_m' 0.027999999999999994 m is at or above 0.027999999999999994 m, the exclusive maximum of the cable_stretch card (TensileFailure). That state is not sealed. | true |
edge-f936ebc850d3 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.velocity_m_s | m/s | false | 0 | outcome_flip | up | 232.152976 | 406d04e52d2c1229 | 232.152976 | 406d04e52d2c122a | 0 | true | null | null | null | {"tracking_degraded": [false, true]} | completed | completed | 4 | 4 | run_seal | 92fdfba6d8d4ae5cd0f7bc48469fdb25b163caa9095c014c3dee53f944986bad | 903306dee73f97ca76cb81b315ea85907a154a8a7c9ecd6c55cffa5a30fdddfe | d1acc857e1e0ccb7677e2120d6bf1bb4d7ce19320d0ed1bafb734af71af1d1f6 | 5e3fdb7fa0b1a6c4bc49e3cda3da2deee069120a6c51e0fb5d52b3fd891a8392 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:36Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 232.15297564132314}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":232.15297564132314},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reje... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 232.15297564132317}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":232.15297564132317},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reje... | false |
edge-7aad4ac117b5 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.velocity_m_s | m/s | false | 0 | outcome_flip | up | 580.382439 | 4082230f3c3b8b5a | 580.382439 | 4082230f3c3b8b5b | 0 | true | null | null | null | {"control_limited": [false, true]} | completed | completed | 4 | 4 | run_seal | f2652796524a1cc8f6822a21ec71955bce8b798793a7ea8592fd0880c2cb1d7e | 15386739094b43ea992932ac621e99253f767e5f0cb67a002bd5e96efbe71106 | d5c6533d846d0240c969aba65a581421a59e0ef132fbbb3e57ac3fae4eb955ac | 4e81c9d03bed89edee78f646c50714f5047f2d5afafb874c5954f061b3cdccbd | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:38Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 580.3824391033079}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":580.3824391033079},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"rejec... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 580.382439103308}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":580.382439103308},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject... | false |
edge-5a32be9ad818 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | initial.velocity_m_s | m/s | false | 0 | declared_limit | up | 2,601.639985 | 40a45347ac14c9ab | 2,601.639985 | 40a45347ac14c9ac | 0 | true | TensileFailure | Physical Failure: the braid reached ultimate tension (TensileFailure). The run is sealed to step 3. The state at step 4 was refused and is not sealed. | part way | null | completed | refused | 4 | 3 | run_seal | 0103204e0a83942cb922f072d57bf52b0e3817b6330e18686239730ff4bdbb83 | 4f6833fec9780b5145df5609ca398c58880a75b88491785b1fedb6c62bbdd69c | 2789fbc389147cb88076c13d414b4b003b7de04443a048719bade5ca94cee8ab | b36dcd41859749a3c7c78a5e5e658793ab4c743eab86c159adfe281341b5f930 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:39Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 2601.639984750383}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":2601.639984750383},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"rejec... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 2601.6399847503835}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":2601.6399847503835},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4,"steps_landed":3,"reject... | false |
edge-c05c08aac74a | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | dt_s | s | false | 0.000002 | declared_limit | down | 0 | 3d8219ca3fd3fa90 | 0 | 3d8219ca3fd3fa8f | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 2.0578161558931235e-12 is below 2.057816155893124e-12 s, the step floor of the cable_stretch card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 3cb2f4226e0c7033b3c5e6fe590d7c710b55f25697013d3a3dabb16d7c2b754e | null | 7dfb79bfbc2e65c47fc79852b5f3094276443b5e3cc7184e134808a2bad96b2b | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:41Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.057816155893124e-12, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":0.0},"dt_s":2.057816155893124e-12,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"rejec... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.0578161558931235e-12, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | Physical Violation: 'dt_s' 2.0578161558931235e-12 is below 2.057816155893124e-12 s, the step floor of the cable_stretch card (DtBelowFloor). | true |
edge-b15651e7b421 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | dt_s | s | false | 0.000002 | declared_limit | up | 0.000002 | 3ec219ca3fd3fa90 | 0.000002 | 3ec219ca3fd3fa91 | 0 | true | DtAboveCeiling | Physical Violation: 'dt_s' 2.1577766334817887e-6 is above 2.1577766334817883e-6 s, the step ceiling of the cable_stretch card (DtAboveCeiling). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 97643a47d97cd34453a154d8c02a61cf657794b71aeabc40007cb413a08d0dca | null | 971fcecce865c7c053441512e9407a989eb5a67c83e618f75ea0ea1576096e21 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:43Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":0.0}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"rejec... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817887e-06, "segments": [{"steps": 4, "load": {"force_n": 0.0}}], "record_every": 1} | Physical Violation: 'dt_s' 2.1577766334817887e-6 is above 2.1577766334817883e-6 s, the step ceiling of the cable_stretch card (DtAboveCeiling). | true |
edge-24b0f373ea66 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | segments[0].load.force_n | N | false | 0 | outcome_flip | up | 110,564.478678 | 40fafe47a8aa5d56 | 110,564.478678 | 40fafe47a8aa5d57 | 0 | true | null | null | null | {"tracking_degraded": [false, true]} | completed | completed | 4 | 4 | run_seal | f43ff20f0fc7eaf8748c4edc7e6dd3f123a4a5699e0a9e276eac3254b5d198e1 | ba8b4339e5dc771814ecc576324598a8dc2ae04b9dd7ae05e231e8e5bdd7f792 | 496c3347b5509efc9fb65b72c31d6276ac223c69766fe36fa808f9fc68cd6dab | 285c02fd15d23a7f693bb9a099d9213061204886a2a61f6657f0634df7d88b61 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:44Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 110564.47867809734}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":110564.47867809734}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reje... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 110564.47867809735}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":110564.47867809735}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reje... | false |
edge-f5031b60ba5c | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory | segments[0].load.force_n | N | false | 0 | declared_limit | up | 247,400.42147 | 410e33435f2bc428 | 247,400.42147 | 410e33435f2bc429 | 0 | true | ForceAboveNyquist | Physical Violation: 'force_n' 247400.42147019625 is larger in size than 247400.42147019622, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |force_n| * dt_s may not exceed the card's impulse limit 0.5338348485619355) (ForceAboveNyquist). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | d38cd1bdb4bf2a50243732ed61337753a0e846b87361296c776d48761819650d | null | df828b892f03960283c53028f8deb89affaf81bf0f94411596ecd813d0789a2b | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:46Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 247400.42147019622}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":4,"load":{"force_n":247400.42147019622}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reje... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 4, "load": {"force_n": 247400.42147019625}}], "record_every": 1} | Physical Violation: 'force_n' 247400.42147019625 is larger in size than 247400.42147019622, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |force_n| * dt_s may not exceed the card's impulse limit 0.5338348485619355) (ForceAboveNyquist). | true |
edge-d9d6343ab0f0 | materials/cable_stretch | materials | cable_stretch | run_trajectory | A Dyneema tendon under a commanded force. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.force_n | N | false | 0 | declared_limit | up | 247,400.42147 | 410e33435f2bc428 | 247,400.42147 | 410e33435f2bc429 | 0 | true | ForceAboveNyquist | Physical Violation: 'force_n' 247400.42147019625 is larger in size than 247400.42147019622, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |force_n| * dt_s may not exceed the card's impulse limit 0.5338348485619355) (ForceAboveNyquist). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 41f819a3c63289e5ca9816039d5d4671c4de65a09ff7f96db9220e5e6ad4a67d | null | 5fe1d54de082c98de8ca8a956de5947274ec6ea9c830ec40050d83a177b1f9a0 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:48Z | 2026-10-14 | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 2, "load": {"force_n": 0.0}}, {"steps": 2, "load": {"force_n": 247400.42147019622}}], "record_every": 1} | {"inputs":{"domain":"materials","card":"cable_stretch","initial":{"elongation_m":0.0,"velocity_m_s":0.0},"dt_s":2.1577766334817883e-6,"segments":[{"steps":2,"load":{"force_n":0.0}},{"steps":2,"load":{"force_n":247400.42147019622}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_... | {"domain": "materials", "card": "cable_stretch", "initial": {"elongation_m": 0.0, "velocity_m_s": 0.0}, "dt_s": 2.1577766334817883e-06, "segments": [{"steps": 2, "load": {"force_n": 0.0}}, {"steps": 2, "load": {"force_n": 247400.42147019625}}], "record_every": 1} | Physical Violation: 'force_n' 247400.42147019625 is larger in size than 247400.42147019622, the largest the card accepts at this dt_s (the Nyquist limit of the RK4 step: |force_n| * dt_s may not exceed the card's impulse limit 0.5338348485619355) (ForceAboveNyquist). | true |
edge-609115fabb8b | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | initial.deflection_m | m | false | -0.001049 | declared_limit | down | -0.006868 | bf7c2160d2ace5a3 | -0.006868 | bf7c2160d2ace5a4 | 0 | true | DeflectionAboveCard | Physical Failure: the deflection envelope, sqrt(deflection_m^2 + (velocity_m_s / omega0)^2), is above 0.01579 m, the largest the compared run held (DeflectionAboveCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 4,000 | null | run_seal | 2493dfe83a1cd178ba7b3f18bc54c4cbaf99843bb7cb428f4698d70eb198f6cd | null | 88b3830b7e70a0e0da9cb8207f5fac7044f65276018b873581e7e3e3dcc63d47 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:50Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.006867769446040314, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.006867769446040314,"velocity_m_s":0.7408030982848752},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4000,"steps_landed":4000,"rejec... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.006867769446040315, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | Physical Failure: the deflection envelope, sqrt(deflection_m^2 + (velocity_m_s / omega0)^2), is above 0.01579 m, the largest the compared run held (DeflectionAboveCard). That state is not sealed. | true |
edge-6c4037134f0b | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | initial.deflection_m | m | false | -0.001049 | declared_limit | up | 0.006252 | 3f799b9cd818df1c | 0.006252 | 3f799b9cd818df1d | 0 | true | DeflectionAboveCard | Physical Failure: the deflection envelope, sqrt(deflection_m^2 + (velocity_m_s / omega0)^2), is above 0.01579 m, the largest the compared run held (DeflectionAboveCard). The run is sealed to step 91. The state at step 92 was refused and is not sealed. | part way | null | completed | refused | 4,000 | 91 | run_seal | e81bf331fc3ef3727d4b2b1b12bb5a9784299e127d5e29de0ef8b1b428299050 | 054c1b42f3a78018a562176bae6833283e543b287b0975ba898f19c2d57e72e7 | 2a92519924c94cacf377be5ffd9c4462b6fe3ffb5920c2c58f2e5a783a5bdf45 | 9762229f95224e15c9edaab2e98a01fc6fe891ad87e66de874d4fd9c9f2d5f57 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:52Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": 0.006251919433957, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":0.006251919433957,"velocity_m_s":0.7408030982848752},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4000,"steps_landed":4000,"reject":n... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": 0.006251919433957001, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":0.006251919433957001,"velocity_m_s":0.7408030982848752},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4000,"steps_landed":91,"reject":"D... | false |
edge-ab9a591f7e33 | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | initial.velocity_m_s | m/s | false | 0.740803 | declared_limit | down | -0.81025 | bfe9ed91f9af3d01 | -0.81025 | bfe9ed91f9af3d02 | 0 | true | DeflectionAboveCard | Physical Failure: the deflection envelope, sqrt(deflection_m^2 + (velocity_m_s / omega0)^2), is above 0.01579 m, the largest the compared run held (DeflectionAboveCard). The run is sealed to step 117. The state at step 118 was refused and is not sealed. | part way | null | completed | refused | 4,000 | 117 | run_seal | e9e0ebda6a2a388cc0f2bff6ed5edde42f40a10e0f685aa9b067f994ac66e75c | 8aed00ed67630b467fe1ae4229db1c4b2ab69f6a9e10cf779b8e88d839c6b1a0 | 5c76cccd12810db9066f9cd9985ed1e751ef64a77d452939260a9ed0a8e1e0c0 | 4a6dc97425c23b8a3c3d8b09d6fa1db6ff90a3e8b763b1c3964f4c68a78e2c1e | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:53Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": -0.810250270524108}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":-0.810250270524108},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4000,"steps_landed":4000,"reject... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": -0.8102502705241081}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":-0.8102502705241081},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4000,"steps_landed":117,"reject":... | false |
edge-bd6d76c140c9 | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | initial.velocity_m_s | m/s | false | 0.740803 | declared_limit | up | 0.81249 | 3fe9ffeb8bae2f53 | 0.81249 | 3fe9ffeb8bae2f54 | 0 | true | DeflectionAboveCard | Physical Failure: the deflection envelope, sqrt(deflection_m^2 + (velocity_m_s / omega0)^2), is above 0.01579 m, the largest the compared run held (DeflectionAboveCard). The run is sealed to step 128. The state at step 129 was refused and is not sealed. | part way | null | completed | refused | 4,000 | 128 | run_seal | 0281621d6537cb61319c495cf27946414c4259857552fad25cb21db595fb71fb | bd2eb5aff2da77e78a1407cf40193635858d4caaa640e7c00597475bb0561bb3 | cbaf290caabbe376546a4db6f68350608ab5577580902df7ebc523f8c9e863d3 | cca24dd624c35aa6b17466e6a0506b9f6159bcc1c39cdcd82999c3b93f3dfa96 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:55Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.8124902465947151}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":0.8124902465947151},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4000,"steps_landed":4000,"reject... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.8124902465947152}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":0.8124902465947152},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4000,"steps_landed":128,"reject":"... | false |
edge-cd455a6e921e | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | dt_s | s | false | 0.00025 | declared_limit | down | 0 | 3e10624dd2f1a9fc | 0 | 3e10624dd2f1a9fb | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 9.536743164062498e-10 is below 9.5367431640625e-10 s, the step floor of the cantilever_eth card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 4,000 | null | run_seal | 4a2608b8203dcb4091adcd05e46b37a6101e209ef226a77706a76f82cda23372 | null | cac7dab0ea09a98ec29c43fb0d62f27461c62d6815aa5f5c2f0aec75f62131c1 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:57Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.7408030982848752}, "dt_s": 9.5367431640625e-10, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":0.7408030982848752},"dt_s":9.5367431640625e-10,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4000,"steps_landed":... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.7408030982848752}, "dt_s": 9.536743164062498e-10, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | Physical Violation: 'dt_s' 9.536743164062498e-10 is below 9.5367431640625e-10 s, the step floor of the cantilever_eth card (DtBelowFloor). | true |
edge-11f28b28c472 | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | dt_s | s | false | 0.00025 | declared_limit | up | 0.00025 | 3f30624dd2f1a9fc | 0.00025 | 3f30624dd2f1a9fd | 0 | true | DtAboveCeiling | Physical Violation: 'dt_s' 0.00025000000000000006 is above 0.00025 s, the step ceiling of the cantilever_eth card (DtAboveCeiling). | before the run | null | completed | stopped before the first step | 4,000 | null | run_seal | 3393059f6cb30103a42c6afe5726813dd64c962c8d10c7163fc187b89db2d4ae | null | ea74b834a97e0076b6b30f833fc5ff47b62f18ac9fe56f957c9fa7028fb86507 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:20:59Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":0.7408030982848752},"dt_s":0.00025,"segments":[{"steps":4000,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4000,"steps_landed":4000,"reject... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025000000000000006, "segments": [{"steps": 4000, "load": {}}], "record_every": 10} | Physical Violation: 'dt_s' 0.00025000000000000006 is above 0.00025 s, the step ceiling of the cantilever_eth card (DtAboveCeiling). | true |
edge-be25ff887bed | signal/cantilever_eth | signal | cantilever_eth | run_trajectory | One aluminium strip clamped at one end at ETH Zürich, ringing down freely in room air in its first bending mode: the deflection at the laser-1 station, 268 mm from the clamp, with no load. | example_run_trajectory | segments[0].steps | steps | true | 4,000 | declared_limit | up | 94,136 | 40f6fb8000000000 | 94,137 | 40f6fb9000000000 | 1 | false | DeflectionBelowCard | Physical Failure: the deflection envelope, sqrt(deflection_m^2 + (velocity_m_s / omega0)^2), is below 5.8e-5 m, the smallest the card was compared at (DeflectionBelowCard). The run is sealed to step 94136. The state at step 94137 was refused and is not sealed. | part way | null | completed | refused | 94,136 | 94,136 | run_seal | 981205714b6a82c7185eae64fb1919970336bec2de2a50c0eb208239b7061c24 | acd57abc6d64d3833bb2ded2833023ce65509a679b5fcd51c432074b943aa19a | 99d33a12a72d94ce0b14d28279f59b5646eebf027d2afdd920fe5e50a8dd192e | b0e85ed8d727c48472a13642af46fe3371e3bcac7921bf8fde16f5eba7a51292 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:01Z | 2026-10-14 | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 94136, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":0.7408030982848752},"dt_s":0.00025,"segments":[{"steps":94136,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":94136,"steps_landed":94136,"rej... | {"domain": "signal", "card": "cantilever_eth", "initial": {"deflection_m": -0.00104914043915228, "velocity_m_s": 0.7408030982848752}, "dt_s": 0.00025, "segments": [{"steps": 94137, "load": {}}], "record_every": 10} | {"inputs":{"domain":"signal","card":"cantilever_eth","initial":{"deflection_m":-0.00104914043915228,"velocity_m_s":0.7408030982848752},"dt_s":0.00025,"segments":[{"steps":94137,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":94137,"steps_landed":94136,"rejec... | false |
edge-e258b2c08b1a | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | initial.radius_m | m | false | 3,522,199.999966 | declared_limit | down | 3,520,816.279917 | 414adc9823d45183 | 3,520,816.279917 | 414adc9823d45182 | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). The run is sealed to step 415. The state at step 416 was refused and is not se... | part way | null | completed | refused | 2,000 | 415 | run_seal | 2af291eab409defafae0b12ac74c27e2a3e38b52d11308a74076e2ed54e01dcd | f684399fdb105efa270c69934c9eef56f1d19283dedf0cdd5bb384b3cdff3f8a | 50b03b9bf9dcb8dd9c88b81bc55134dae9232bf46bbbfa267b9bdf8164c56b81 | 35c37384c45f30fb0105d72c4d6740d7069a744c8cb72d58459ac50d20a49b9b | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:03Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3520816.2799169435, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3520816.2799169435,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3520816.279916943, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3520816.279916943,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":... | false |
edge-32f2eb7c19b6 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | initial.radius_m | m | false | 3,522,199.999966 | declared_limit | up | 3,522,214 | 414adf5300000000 | 3,522,214 | 414adf5300000001 | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). That state is not sealed. | before the run | null | completed | stopped before the first step | 2,000 | null | run_seal | b6488ba87cd58181581b193bd28b6fc030d3a610ae6e3c5ab1f208b1aa134b5f | null | 1ff4c6a6492dbf90b31f8cd8cc678bdcee796ae44906a0ef045600df460b4c83 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:05Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522214.0, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522214.0,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"complet... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522214.0000000005, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). That state is not sealed. | true |
edge-cd09190fc1a9 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | initial.radial_speed_m_s | m/s | false | -1,202.158544 | declared_limit | down | -1,206.693726 | c092dac65ffe4b46 | -1,206.693726 | c092dac65ffe4b47 | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). The run is sealed to step 391. The state at step 392 was refused and is not se... | part way | null | completed | refused | 2,000 | 391 | run_seal | 1de365ed1ae4e9b30226e9008f11aa9051db7ae98556932cde6a7bc6812a6009 | a38f33287515654dd550f18c76b7a4dacdf785c67104a12c1d65f3e2d9c15054 | d96b4ab4dd1698b0984d976f2622e38928c5c02679b1d3aefd37d41dbaa888c2 | c67e782a2e2875c3eb4f1d5954e50bb51c929d8fd33a947d518ae0b14b51b938 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:07Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1206.6937255605167, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1206.6937255605167,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1206.693725560517, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1206.693725560517,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":... | false |
edge-f3c88d0bbd80 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | initial.radial_speed_m_s | m/s | false | -1,202.158544 | declared_limit | up | -1,197.5473 | c092b6306f5c2ba4 | -1,197.5473 | c092b6306f5c2ba3 | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). The run is sealed to step 395. The state at step 396 was refused and is not se... | part way | null | completed | refused | 2,000 | 395 | run_seal | e2b94398d59f318e569a5cff710eea4316f8f83497fb1b00acbd482b1da0a5f6 | 0e25958840d7e2c5711455c705b8f3a626e00876b08815fbba958b313539bb81 | 9d93dbbfbac23fb9ded1b557e328e38bd9d60cce5508e997dd07ffbe97289480 | 498182c75b4dbf31fa45475858656cdfaad5c91c4165ff274610b1aea1687751 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:08Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1197.5472998048435, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1197.5472998048435,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1197.5472998048433, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1197.5472998048433,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | false |
edge-9160ab8aa28c | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | initial.transverse_speed_m_s | m/s | false | 5,633.705477 | declared_limit | down | 5,632.67473 | 40b600acbb15f1e2 | 5,632.67473 | 40b600acbb15f1e1 | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). That state is not sealed. | before the run | null | completed | stopped before the first step | 2,000 | null | run_seal | ba016521e414cd396983fd26c0311a29ba7e5fb3225be22fb6f7253bd13c174a | null | c58f44b651e978ea17012877bb2f13ba77964276e2f378c809183da262ad3d7e | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:10Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5632.67472970157}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5632.67472970157},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5632.674729701569}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). That state is not sealed. | true |
edge-369147440df1 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | initial.transverse_speed_m_s | m/s | false | 5,633.705477 | declared_limit | up | 5,634.74577 | 40b602beeac109de | 5,634.74577 | 40b602beeac109df | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). The run is sealed to step 392. The state at step 393 was refused and is not se... | part way | null | completed | refused | 2,000 | 392 | run_seal | 691a473fc4d0dfdf4f53675e01834c06b74a65268bd172bf6da00fa7a8d3af8b | c4a4aa2c9119965304849cd1d33213c9989b0a63976f0f0d5e121a23b0275a8f | 249ac5517c7979943eb9a4eacaef7b141fa2fbc3e1b8cd0f2d2e0fcd81346dc2 | b45d5b6da961c9dd905545afa5d854caf283ab711ffe0bdec7b46709db6e183f | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:12Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5634.745769562634}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5634.745769562634},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5634.745769562635}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5634.745769562635},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | false |
edge-40e109b748b3 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | dt_s | s | false | 0.1 | declared_limit | down | 0 | 3e7999999999999a | 0 | 3e79999999999999 | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 9.536743164062499e-8 is below 9.5367431640625e-8 s, the step floor of the capsule_insight card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 2,000 | null | run_seal | 235636422065bd647f8cb7ba762f8f4b7eb91cdc0e18c187639c3a176d0a51ea | null | 1a29d75c4ca7c9f0a91429bdc79fe69d8d62d2f91a9e6cf037dc8db2c73fb155 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:14Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 9.5367431640625e-08, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":9.5367431640625e-8,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 9.536743164062499e-08, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | Physical Violation: 'dt_s' 9.536743164062499e-8 is below 9.5367431640625e-8 s, the step floor of the capsule_insight card (DtBelowFloor). | true |
edge-c6bba4d1d58b | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | dt_s | s | false | 0.1 | declared_limit | up | 0.1 | 3fb999999999999a | 0.1 | 3fb999999999999b | 0 | true | DtAboveCeiling | Physical Violation: 'dt_s' 0.10000000000000002 is above 0.1 s, the step ceiling of the capsule_insight card (DtAboveCeiling). | before the run | null | completed | stopped before the first step | 2,000 | null | run_seal | bf81706c8125111a3443e18ea05cc0e836a664c8eea6c2493b7fa897f0f47b12 | null | 61bbb047d873ef6b30566bbe040e568d522105da4a41d2e3e6aac3b6dec9d6df | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:15Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.10000000000000002, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | Physical Violation: 'dt_s' 0.10000000000000002 is above 0.1 s, the step ceiling of the capsule_insight card (DtAboveCeiling). | true |
edge-db9e6e68c38d | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | segments[0].steps | steps | true | 2,000 | declared_end | up | 2,110 | 40a07c0000000000 | 2,111 | 40a07e0000000000 | 1 | false | PastComparedFlight | Ended: the run reached the end the capsule_insight card declares (PastComparedFlight): 5700 m or Mach 1.46, the lowest state the compared run reached at the flown parachute deployment, 6164.6 m above the datum, where the card's entry ends. The step past it is not taken, and the run is sealed to step 2110. | declared end | null | completed | ended | 2,110 | 2,110 | run_seal | 830ba5342c9e103447bf2f49d613fc9abb41a0cf0959b6612254cd351bb0c078 | a526b82f9e17bffbc0d9125663b4a3ccab5196d84b38adfd5ff08e8c4fe30090 | 71ef6de6ce2f89dc464c558977ccc23763ef1fafa0235cdbe84a56779ee74861 | e779392aaaed7adfad08a18859d0e4de1e39f79a7e930f922ef5096b54d335b6 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:17Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2110, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2110,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2111, "load": {"lift_over_drag": -0.031}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2111,"load":{"lift_over_drag":-0.031}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome"... | false |
edge-a191b2889a46 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | segments[0].load.lift_over_drag | 1 | false | -0.031 | declared_limit | down | -0.08 | bfb47ae147ae147b | -0.08 | bfb47ae147ae147c | 0 | true | LiftOutsideCard | Physical Failure: 'lift_over_drag' -0.08000000000000002 is below -0.08, the inclusive minimum of the capsule_insight card (LiftOutsideCard). That state is not sealed. | before the run | null | ended | stopped before the first step | 1,825 | null | run_seal | 00066f80cc3296beef97ce16f4ac4e0ae4cf6d87985b23ec0389b446b5480aba | null | eb3f3d1142e054aea61c6e2e10fc68ab664a0df60ead38b987c8bb76feb1dcec | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:19Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.08}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.08}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.08000000000000002}}], "record_every": 10} | Physical Failure: 'lift_over_drag' -0.08000000000000002 is below -0.08, the inclusive minimum of the capsule_insight card (LiftOutsideCard). That state is not sealed. | true |
edge-3e6a2f454667 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | segments[0].load.lift_over_drag | 1 | false | -0.031 | declared_end | down | -0.048014 | bfa89554104ae47b | -0.048014 | bfa89554104ae47c | 0 | true | PastComparedFlight | Ended: the run reached the end the capsule_insight card declares (PastComparedFlight): 5700 m or Mach 1.46, the lowest state the compared run reached at the flown parachute deployment, 6164.6 m above the datum, where the card's entry ends. The step past it is not taken, and the run is sealed to step 1999. | declared end | null | completed | ended | 2,000 | 1,999 | run_seal | 7076d8811d3ca8ab8ddaf4e8650870ca33381cba8e3816e1d4a94dc72f758bd2 | f5f0986a97f1c22a61c18e11944892952a30f51faf2ec5be74a724099d3ad804 | 5eb8a0ffe4497e7f58c261a5cbec38b8c115147bcb756f6d8cd96a21fc265aef | c05489ae8e8a021fd86e6800f834015da70cdd023dd7fe953da02844d6e42ea1 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:21Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.04801428507693913}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.04801428507693913}}],"record_every":10},"engine_version":"genesis_kernel_v0.... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": -0.04801428507693914}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":-0.04801428507693914}}],"record_every":10},"engine_version":"genesis_kernel_v0.... | false |
edge-0ab3a4d15d22 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory | segments[0].load.lift_over_drag | 1 | false | -0.031 | declared_limit | up | 0.08 | 3fb47ae147ae147b | 0.08 | 3fb47ae147ae147c | 0 | true | LiftOutsideCard | Physical Failure: 'lift_over_drag' 0.08000000000000002 is above 0.08, the inclusive maximum of the capsule_insight card (LiftOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 2,000 | null | run_seal | 5cfddaab7334d1b61ebfa09d053b07ee3659906f9f953d7492bcd9a30af6ab70 | null | 505f54ee67ca8cf0b715c6a4028e8fe6e834723591455f5198286267ac6a1e92 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:22Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": 0.08}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":2000,"load":{"lift_over_drag":0.08}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 2000, "load": {"lift_over_drag": 0.08000000000000002}}], "record_every": 10} | Physical Failure: 'lift_over_drag' 0.08000000000000002 is above 0.08, the inclusive maximum of the capsule_insight card (LiftOutsideCard). That state is not sealed. | true |
edge-f63d2b868fd0 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.lift_over_drag | 1 | false | -0.031 | declared_limit | down | -0.08 | bfb47ae147ae147b | -0.08 | bfb47ae147ae147c | 0 | true | LiftOutsideCard | Physical Failure: 'lift_over_drag' -0.08000000000000002 is below -0.08, the inclusive minimum of the capsule_insight card (LiftOutsideCard). That state is not sealed. | before the run | null | ended | stopped before the first step | 1,906 | null | run_seal | bddd40cb97f070ec357d46cfebbbc4413ad02cbe4ac16cc016f5da342d3fa919 | null | 4190079977dfba78bf0fbd153abe2e7285243965e6e3539155251b213080ccdb | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:24Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 1000, "load": {"lift_over_drag": -0.031}}, {"steps": 1000, "load": {"lift_over_drag": -0.08}}], "record_... | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":1000,"load":{"lift_over_drag":-0.031}},{"steps":1000,"load":{"lift_over_drag":-0.08}}],"record_every":10},"en... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 1000, "load": {"lift_over_drag": -0.031}}, {"steps": 1000, "load": {"lift_over_drag": -0.080000000000000... | Physical Failure: 'lift_over_drag' -0.08000000000000002 is below -0.08, the inclusive minimum of the capsule_insight card (LiftOutsideCard). That state is not sealed. | true |
edge-f620225fdec6 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.lift_over_drag | 1 | false | -0.031 | declared_end | down | -0.05569 | bfac8371744ada66 | -0.05569 | bfac8371744ada67 | 0 | true | PastComparedFlight | Ended: the run reached the end the capsule_insight card declares (PastComparedFlight): 5700 m or Mach 1.46, the lowest state the compared run reached at the flown parachute deployment, 6164.6 m above the datum, where the card's entry ends. The step past it is not taken, and the run is sealed to step 1999. | declared end | null | completed | ended | 2,000 | 1,999 | run_seal | 4d6a575d4fc5c48d3f265c8886f7031efc6f42fbc14e2f629cac8ababe40b121 | d960c3a13b1dd7a2c455808aa75bf1bfc674077fe77f5d19a98bb4a551210e20 | 38f047474ea1ead070c8ba353ed2a8893b54a02447cebe0f150336452d947654 | adef3710cc9c349ccb7a019611d17eb1cc9d9184c1add5d4db4b1fbef3e3796c | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:26Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 1000, "load": {"lift_over_drag": -0.031}}, {"steps": 1000, "load": {"lift_over_drag": -0.055690331884240... | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":1000,"load":{"lift_over_drag":-0.031}},{"steps":1000,"load":{"lift_over_drag":-0.05569033188424015}}],"record... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 1000, "load": {"lift_over_drag": -0.031}}, {"steps": 1000, "load": {"lift_over_drag": -0.055690331884240... | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":1000,"load":{"lift_over_drag":-0.031}},{"steps":1000,"load":{"lift_over_drag":-0.055690331884240156}}],"recor... | false |
edge-e4d2a9c94c66 | aerospace/capsule_insight | aerospace | capsule_insight | run_trajectory | The InSight entry capsule on its entry at Mars of 26 November 2018, from the top of the atmosphere to just past the flight's parachute deployment, down to 5700 m or Mach 1.46: no wind, the air of orbiter soundings set on the lander's barometer, and the capsule's lift as the load. Only runs from the locked entry state w... | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.lift_over_drag | 1 | false | -0.031 | declared_limit | up | 0.023635 | 3f9833e572840bbe | 0.023635 | 3f9833e572840bbf | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the runs compared with the flight flew from the locked entry state: above 126.5 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). The run is sealed to step 1578. The state at step 1579 was refused and is not ... | part way | null | completed | refused | 2,000 | 1,578 | run_seal | c1a2fa68680b2ece4f66beb894e89be09c4f58f8b7ef736f9b79951e7d7077f2 | 6e4c79d97e7b7e9f146729e1552bd6b2a0bc39c8ecd1a77c0ba935a84f38df66 | 08df8d34d3b9d7ea6312f7d600e866a8aa212b56ab612d7d10dbc7317998b6cf | 37afe19c541d98b0d77b64da7e72d518117ae4ae6c2bd58190f1250a661c1701 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:28Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 1000, "load": {"lift_over_drag": -0.031}}, {"steps": 1000, "load": {"lift_over_drag": 0.0236354685921573... | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":1000,"load":{"lift_over_drag":-0.031}},{"steps":1000,"load":{"lift_over_drag":0.023635468592157365}}],"record... | {"domain": "aerospace", "card": "capsule_insight", "initial": {"radius_m": 3522199.9999655997, "radial_speed_m_s": -1202.1585438056352, "transverse_speed_m_s": 5633.705477158609}, "dt_s": 0.1, "segments": [{"steps": 1000, "load": {"lift_over_drag": -0.031}}, {"steps": 1000, "load": {"lift_over_drag": 0.0236354685921573... | {"inputs":{"domain":"aerospace","card":"capsule_insight","initial":{"radius_m":3522199.9999655997,"radial_speed_m_s":-1202.1585438056352,"transverse_speed_m_s":5633.705477158609},"dt_s":0.1,"segments":[{"steps":1000,"load":{"lift_over_drag":-0.031}},{"steps":1000,"load":{"lift_over_drag":0.023635468592157368}}],"record... | false |
edge-44a31f3444f3 | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | initial.radius_m | m | false | 6,503,140 | declared_limit | down | 6,471,629.963878 | 4158aff37db02bda | 6,471,629.963878 | 4158aff37db02bd9 | 0 | true | MachOutsideCard | Physical Failure: the Mach number is below 1.0, or is above 40 below 68.96 km, where the drag table by Mach number ends (MachOutsideCard). The run is sealed to step 399. The state at step 400 was refused and is not sealed. | part way | null | completed | refused | 400 | 399 | run_seal | c95de8e13c77e641c5419c7f141473b723798bfa5a9d7039f0d61c448c600035 | feacc5ea72f7ab76c358bd4f53996f08c96904e3f6447806bec32e500ebd0d4b | 3b76e660283e0ee7a6a7d128f2dadcfa81b19d906a01e2105378032a69d5b6cd | 69f3cff5a00256b5ca84b01bddb6088867f50be667579d866789817c564c716c | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:30Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6471629.9638776425, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6471629.9638776425,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_r... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6471629.963877642, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6471629.963877642,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requ... | false |
edge-8f080d6c044c | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | initial.radius_m | m | false | 6,503,140 | declared_limit | up | 6,503,928.511478 | 4158cf7e20bc1020 | 6,503,928.511478 | 4158cf7e20bc1021 | 0 | true | AltitudeOutsideCard | Physical Failure: altitude is above 134.7 km or below 30 km (AltitudeOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 400 | null | run_seal | 8379ce0593c2316d4d1330e3558c6aa261ddd9b407ed8888f0edb14c035740fd | null | d0afdde7433fef1f0b648fda4929fce397e1d50cc5c1b5d992889290aa7affa2 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:32Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503928.511478454, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503928.511478454,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_re... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503928.511478455, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | Physical Failure: altitude is above 134.7 km or below 30 km (AltitudeOutsideCard). That state is not sealed. | true |
edge-76c9f74917ca | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | initial.radial_speed_m_s | m/s | false | -1,842.141673 | declared_limit | down | -1,853.322967 | c09cf54ab7e602fa | -1,853.322967 | c09cf54ab7e602fb | 0 | true | AirSpeedOutsideCard | Physical Failure: above 68.96 km the speed through the air is below 11900 m/s or above 12575 m/s, outside the speeds the entry compared with the flight passed through there (AirSpeedOutsideCard). The run is sealed to step 399. The state at step 400 was refused and is not sealed. | part way | null | completed | refused | 400 | 399 | run_seal | 2f2eafdfb97c939b790628b79ff5f95c00a29e0e7ad569b75398d9628778d777 | 6ba7bba8b79e006a5dca0346db62d906bd226bbb30f1741ec9a92d18479c649e | 8cac32c86de8e60fe9b904e7914a7fb8087b2c1937f1e3392593291c149d3f0c | ad863de592c2c3a0acd57f0b67d907f7c2f9b120863ac594509da0b85ac13973 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:33Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1853.32296714204, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1853.32296714204,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1853.3229671420402, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1853.3229671420402,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4... | false |
edge-1584bf636e85 | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | initial.radial_speed_m_s | m/s | false | -1,842.141673 | declared_limit | up | -313.198575 | c073932d5cfa0443 | -313.198575 | c073932d5cfa0442 | 0 | true | OffComparedCorridor | Physical Failure: the state is off the corridor the entry compared with the flight flew from the locked entry state: below 68.96 km, or moving upward above it, it is under 31 km or above 69 km, or its speed through the air or its path angle is outside the corridor at its altitude (OffComparedCorridor). The run is seale... | part way | null | completed | refused | 400 | 399 | run_seal | 69806c8fdc505a53fb93be8d722f45bb751bf9cf99d10520102cebf3035b9dec | 5a51672f30c4e7e466240aeedcf6fee981e60b6d44632e7b45f0f5bcce06daaf | df68faaa9989ecc40d80705fc6fb157a14fa5911343a3b379fcd812149814a76 | e7a0b6c1700fb4e69c91d409921748117a1f34647d3d72533755d4d78555364f | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:35Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -313.1985749975467, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-313.1985749975467,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -313.19857499754664, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-313.19857499754664,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4... | false |
edge-c82183f1f5d9 | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | initial.transverse_speed_m_s | m/s | false | 12,767.792059 | declared_limit | down | 12,109.006555 | 40c7a680d6ceef04 | 12,109.006555 | 40c7a680d6ceef03 | 0 | true | AirSpeedOutsideCard | Physical Failure: above 68.96 km the speed through the air is below 11900 m/s or above 12575 m/s, outside the speeds the entry compared with the flight passed through there (AirSpeedOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 400 | null | run_seal | b5e5dbc667af4b476bc26c8388c4fe8a0142ddc1f91112ad5c9ffe1498434a9e | null | 23383817c885d925480c9b308ac05e97a53e7ef43a8bb3693239e9d38ecc1b0b | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:37Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12109.006555430133}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12109.006555430133},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested"... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12109.00655543013}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | Physical Failure: above 68.96 km the speed through the air is below 11900 m/s or above 12575 m/s, outside the speeds the entry compared with the flight passed through there (AirSpeedOutsideCard). That state is not sealed. | true |
edge-7256942d6958 | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | initial.transverse_speed_m_s | m/s | false | 12,767.792059 | declared_limit | up | 12,769.524134 | 40c8f0c316d0e25d | 12,769.524134 | 40c8f0c316d0e25e | 0 | true | AirSpeedOutsideCard | Physical Failure: above 68.96 km the speed through the air is below 11900 m/s or above 12575 m/s, outside the speeds the entry compared with the flight passed through there (AirSpeedOutsideCard). The run is sealed to step 399. The state at step 400 was refused and is not sealed. | part way | null | completed | refused | 400 | 399 | run_seal | f3bfda06b3248daf371964437c7eb96934e1fc7b55061232e38e124c150d50da | 9edf4aa58fb0d0c05151216dcf9be1a50a6d3aa576668b4f1dc4634c7c20ee48 | 7005908b32f1e547e921357099d236421351240508cbdb54110c48bd8393b403 | e9bafe97567a1d45430201ae8c30c8af8ddb78fc8dc77f1bf0ec5e3e959e6dca | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:39Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12769.52413378766}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12769.52413378766},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12769.524133787661}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12769.524133787661},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":4... | false |
edge-4654351a8ef7 | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | dt_s | s | false | 0.05 | declared_limit | down | 0 | 3e6999999999999a | 0 | 3e69999999999999 | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 4.7683715820312496e-8 is below 4.76837158203125e-8 s, the step floor of the capsule_stardust card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 400 | null | run_seal | 29bd850aba062c7a6685ee2cbe5159f3b98343b7a20b6a8df921bdf20e92f758 | null | b8bf481bdfa3ce68e67ab6a3d87361c96108895f8ca8c696407002f29ff73960 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:40Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 4.76837158203125e-08, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":4.76837158203125e-8,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","s... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 4.7683715820312496e-08, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | Physical Violation: 'dt_s' 4.7683715820312496e-8 is below 4.76837158203125e-8 s, the step floor of the capsule_stardust card (DtBelowFloor). | true |
edge-fc4885b08d8f | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | dt_s | s | false | 0.05 | declared_limit | up | 0.05 | 3fa999999999999a | 0.05 | 3fa999999999999b | 0 | true | DtAboveCeiling | Physical Violation: 'dt_s' 0.05000000000000001 is above 0.05 s, the step ceiling of the capsule_stardust card (DtAboveCeiling). | before the run | null | completed | stopped before the first step | 400 | null | run_seal | 054915e4d674dec02e4bc582f34d9c3de69c0c241bff90fec84afe8c131fe3fb | null | 532f74073d902b09dce6b1882bcedabdf6bd6bcc9de0650917e966af66f2761e | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:42Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":400,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested"... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05000000000000001, "segments": [{"steps": 400, "load": {}}], "record_every": 10} | Physical Violation: 'dt_s' 0.05000000000000001 is above 0.05 s, the step ceiling of the capsule_stardust card (DtAboveCeiling). | true |
edge-468129b5ad2a | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | segments[0].steps | steps | true | 400 | outcome_flip | up | 2,542 | 40a3dc0000000000 | 2,543 | 40a3de0000000000 | 1 | false | null | null | null | {"drogue_mach_window": [false, true]} | completed | completed | 2,542 | 2,543 | run_seal | b4f0465a0ecfa3fac67ed446e572362d0905e8522ebfd0a4418c19781f2d54aa | 5d23dc501d5e3f2e6001fb6cbec10b396e3b6a8689ce67d82fd11ec7093b3431 | 808a77328b45b93af88ca27cf69b9fa4807145f83f3e0cada6110d46aa9046df | a36a6480a80b570d88d9f9fbd2b42800c7267a27ba3f56eb0a9fc45a36372c7a | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:44Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 2542, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":2542,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 2543, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":2543,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested... | false |
edge-1aa2e3b401f7 | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | segments[0].steps | steps | true | 400 | outcome_flip | up | 2,759 | 40a58e0000000000 | 2,760 | 40a5900000000000 | 1 | false | null | null | null | {"drogue_mach_window": [true, false]} | completed | completed | 2,759 | 2,760 | run_seal | 4fee6e3e3240cf76ca2f81edba5503566864aa125458dda2d1618033789c95e3 | be5a6223f80eb1157a003be0b4ef66bc7dc01c0ad6b696783939678fb7509088 | 2ffc93c3657ed3ff495ee7e8528b4ff6223691e52993099d14590e451a315bcc | 2f3655086bf89ca7d6990ceccde5e4f4b56c04c5e3d38d6e71db66cf88093ea7 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:45Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 2759, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":2759,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 2760, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":2760,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested... | false |
edge-71eb6d906ddc | aerospace/capsule_stardust | aerospace | capsule_stardust | run_trajectory | The Stardust sample return capsule on its entry of 15 January 2006, from entry interface down to the drogue-deployment condition the radar recorded, under 31030 m and under Mach 1.23 at once, past which a state is refused: no lift, no wind, a yearly standard atmosphere, and no load. One entry was compared with the flig... | example_run_trajectory | segments[0].steps | steps | true | 400 | declared_end | up | 2,779 | 40a5b60000000000 | 2,780 | 40a5b80000000000 | 1 | false | PastFlightDeployment | Ended: the run reached the end the capsule_stardust card declares (PastFlightDeployment): the drogue-deployment condition the radar recorded, altitude under 31,030 m and Mach number under 1.23 at once, where the card's entry ends; the step that first crosses both lands. The step past it is not taken, and the run is sea... | declared end | null | completed | ended | 2,779 | 2,779 | run_seal | aacb3e16bddb6f9b80f8c288b92d0b5ca8995e1d7f1e395e700726ac635eae2c | 0b1bad097a3da02b76dd16e761d45e4d8385701107cb6d2e4fe5dd185a9aa686 | 6207f62da5d4126a490641deb3b2ac07edc1bdfe079b09f127ed65fda59f4989 | c24ac956c7f447758ba0ef1fc9300a688867092cf8f9d679b0a08233f42d997a | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:47Z | 2026-10-14 | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 2779, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":2779,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested... | {"domain": "aerospace", "card": "capsule_stardust", "initial": {"radius_m": 6503140.0, "radial_speed_m_s": -1842.1416729435698, "transverse_speed_m_s": 12767.792058801891}, "dt_s": 0.05, "segments": [{"steps": 2780, "load": {}}], "record_every": 10} | {"inputs":{"domain":"aerospace","card":"capsule_stardust","initial":{"radius_m":6503140.0,"radial_speed_m_s":-1842.1416729435698,"transverse_speed_m_s":12767.792058801891},"dt_s":0.05,"segments":[{"steps":2780,"load":{}}],"record_every":10},"engine_version":"genesis_kernel_v0.9.0","outcome":"ended","steps_requested":27... | false |
edge-c2752ffef683 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | initial.soc | 1 | false | 1 | declared_limit | down | 1 | 3ff0000000000000 | 1 | 3fefffffffffffff | 0 | true | ContinuationWithoutUpstream | Physical Violation: 'initial.soc' is 0.9999999999999999, where a fresh start of the cell_18650pf card states 1; a start that carries a run on must arrive with from, naming the sealed run it continues, so that what it carries is checked against that run's seal. A fresh start states soc 1, a discharge from full charge (C... | before the run | null | completed | stopped before the first step | 4 | null | run_seal | d87dfd1dd2485a1f5c19556b5f6b4a2724f5f0d076d676e1dfcacef653439050 | null | b3a75727ac84c4fa3d0db87e34e8a230c2110fb74943d50fe3cb97820a972bb7 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:49Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final_st... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 0.9999999999999999, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | Physical Violation: 'initial.soc' is 0.9999999999999999, where a fresh start of the cell_18650pf card states 1; a start that carries a run on must arrive with from, naming the sealed run it continues, so that what it carries is checked against that run's seal. A fresh start states soc 1, a discharge from full charge (C... | true |
edge-ea69d8b51e9d | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | initial.soc | 1 | false | 1 | declared_limit | up | 1 | 3ff0000000000000 | 1 | 3ff0000000000001 | 0 | true | StateOfChargeOutsideCard | Physical Failure: 'soc' 1.0000000000000002 is above 1, the inclusive maximum of the cell_18650pf card (StateOfChargeOutsideCard). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | d87dfd1dd2485a1f5c19556b5f6b4a2724f5f0d076d676e1dfcacef653439050 | null | b3a75727ac84c4fa3d0db87e34e8a230c2110fb74943d50fe3cb97820a972bb7 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:49Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final_st... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0000000000000002, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | Physical Failure: 'soc' 1.0000000000000002 is above 1, the inclusive maximum of the cell_18650pf card (StateOfChargeOutsideCard). That state is not sealed. | true |
edge-ba89d99d1da0 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | initial.held_current_a | A | false | 2.9 | declared_limit | down | 2.89917 | 400731800a7c5abf | 2.89917 | 400731800a7c5abe | 0 | true | CurrentChangedDuringDischarge | Physical Failure: 'current_a' 2.9 A is more than 0.00083 A from the held current, the 2.899169999999997 A of 'held_current_a': a run of the cell_18650pf card is one discharge at one held current, as the tester holds it (CurrentChangedDuringDischarge). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 44db115851a5db7cdfa375937cc9c5dd454982c95cb9762c23f7c5366f8f4da9 | null | 97a1d32f412f3092464c903d0b856b8a7555fc6748fc74120a452a0cc9a08a80 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:52Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.8991699999999976}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.8991699999999976},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail"... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.899169999999997}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | Physical Failure: 'current_a' 2.9 A is more than 0.00083 A from the held current, the 2.899169999999997 A of 'held_current_a': a run of the cell_18650pf card is one discharge at one held current, as the tester holds it (CurrentChangedDuringDischarge). That state is not sealed. | true |
edge-272d095be593 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | initial.held_current_a | A | false | 2.9 | declared_limit | up | 2.90065 | 40073487fcb923a3 | 2.90065 | 40073487fcb923a4 | 0 | true | CurrentNotCompared | Physical Failure: 'held_current_a' 2.9006500000000006 A is above 2.90065 A, the inclusive maximum of the cell_18650pf card (CurrentNotCompared). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 145d67ff25e96b35f5ea459d91671fd9d9ed5a27105b48909ac1f36695523346 | null | f6f07e2480d8fc868371f8364d150301e1ff67c96fdfd7db734afe6e8d131148 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:53Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.90065}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.90065},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"fina... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9006500000000006}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | Physical Failure: 'held_current_a' 2.9006500000000006 A is above 2.90065 A, the inclusive maximum of the cell_18650pf card (CurrentNotCompared). That state is not sealed. | true |
edge-fc105078f032 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | dt_s | s | false | 17.436 | declared_limit | down | 0.000017 | 3ef16f9db22d0e56 | 0.000017 | 3ef16f9db22d0e55 | 0 | true | DtBelowFloor | Physical Violation: 'dt_s' 1.662826538085937e-5 is below 1.6628265380859375e-5 s, the step floor of the cell_18650pf card (DtBelowFloor). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 63195c255d20250f54453528915f116e3e9aee5c2514c3ebf186a4b533401721 | null | 0d5cf2a3bac5c27b88d19ea269443c94f374363e6f68469bd2ee294bf0b10920 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:55Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 1.6628265380859375e-05, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":0.000016628265380859375,"segments":[{"steps":4,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detai... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 1.662826538085937e-05, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | Physical Violation: 'dt_s' 1.662826538085937e-5 is below 1.6628265380859375e-5 s, the step floor of the cell_18650pf card (DtBelowFloor). | true |
edge-74f5d62923f0 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | dt_s | s | false | 17.436 | declared_limit | up | 17.436 | 40316f9db22d0e56 | 17.436 | 40316f9db22d0e57 | 0 | true | DtAboveCeiling | Physical Violation: 'dt_s' 17.436000000000003 is above 17.436 s, the step ceiling of the cell_18650pf card (DtAboveCeiling). | before the run | null | completed | stopped before the first step | 4 | null | run_seal | d87dfd1dd2485a1f5c19556b5f6b4a2724f5f0d076d676e1dfcacef653439050 | null | b3a75727ac84c4fa3d0db87e34e8a230c2110fb74943d50fe3cb97820a972bb7 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:49Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"final_st... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436000000000003, "segments": [{"steps": 4, "load": {"current_a": 2.9}}], "record_every": 1} | Physical Violation: 'dt_s' 17.436000000000003 is above 17.436 s, the step ceiling of the cell_18650pf card (DtAboveCeiling). | true |
edge-d44c4a63ece1 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | segments[0].steps | steps | true | 4 | outcome_flip | up | 187 | 4067600000000000 | 188 | 4067800000000000 | 1 | false | null | null | null | {"sag_warning": [false, true]} | completed | completed | 187 | 188 | run_seal | 45085bca22c41c04d277c1f0ea172fd32d9357b3276c1473bcdec9b3b37371ab | 72d281eedaf4835cd5e140b18f7080e526840742cfce9bc7f992893a076de8bd | 5b14e05939b5e5d074988cc1de8f328316e93013adef17b3a08253b965cbe3a9 | ac25755f52a06885f029abbbba18225e53edd5b2d5ea0d622afeaf2436c9f44e | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:58Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 187, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":187,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":187,"steps_landed":187,"reject":null,"reject_detail":null,"fi... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 188, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":188,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":188,"steps_landed":188,"reject":null,"reject_detail":null,"fi... | false |
edge-614a1fb105e1 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | segments[0].steps | steps | true | 4 | declared_limit | up | 196 | 4068800000000000 | 197 | 4068a00000000000 | 1 | false | UndervoltageCutoff | Physical Failure: the cell reached the 2.5 V cutoff (UndervoltageCutoff). The run is sealed to step 196. The state at step 197 was refused and is not sealed. | part way | null | completed | refused | 196 | 196 | run_seal | af0c7450fc4906bb947e07adc46036697860d65f29319deae3c3558e7db9cbff | 45a1c94f238af9e45083946205c1486f370a98309ff7f42dfeb8d0ddac64daf0 | d07cdb48573bebe1d229f73961f238f0c160cce08575c52b544e8f87e1f11174 | fe8ff8b81b132b8e4f2bf8c8389af1aa13633d35ed94a2924c1da292a303668f | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:21:59Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 196, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":196,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":196,"steps_landed":196,"reject":null,"reject_detail":null,"fi... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 197, "load": {"current_a": 2.9}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":197,"load":{"current_a":2.9}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":197,"steps_landed":196,"reject":"UndervoltageCutoff","reject_de... | false |
edge-c91f147bdbe9 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | segments[0].load.current_a | A | false | 2.9 | declared_limit | down | 2.89917 | 400731800a7c5abf | 2.89917 | 400731800a7c5abe | 0 | true | CurrentChangedDuringDischarge | Physical Failure: 'current_a' 2.899169999999997 A is more than 0.00083 A from the held current, the 2.9 A of 'held_current_a': a run of the cell_18650pf card is one discharge at one held current, as the tester holds it (CurrentChangedDuringDischarge). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 4a56f064f506d8e15a0c123cb1f5711873a32b4a0f3ed98052641e377b0ce6c0 | null | 1149ce519752f50672cdc27c9d932d9b1fa13cdc30390e8bdb3b887ee83bf939 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:01Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.8991699999999976}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.8991699999999976}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail"... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.899169999999997}}], "record_every": 1} | Physical Failure: 'current_a' 2.899169999999997 A is more than 0.00083 A from the held current, the 2.9 A of 'held_current_a': a run of the cell_18650pf card is one discharge at one held current, as the tester holds it (CurrentChangedDuringDischarge). That state is not sealed. | true |
edge-5f2a3c10ab4c | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory | segments[0].load.current_a | A | false | 2.9 | declared_limit | up | 2.90065 | 40073487fcb923a3 | 2.90065 | 40073487fcb923a4 | 0 | true | CurrentNotCompared | Physical Failure: 'current_a' 2.9006500000000006 A is above 2.90065 A, the inclusive maximum of the cell_18650pf card (CurrentNotCompared). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 597729bac91bb6df25c1e770805643eaa89efd11cf1a0fa43934d7d78ecac23c | null | aaa1dd086c37a4053df2f051489977ffd1cacfec1b658d985e2c672715b13fac | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:03Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.90065}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":4,"load":{"current_a":2.90065}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"reject":null,"reject_detail":null,"fina... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 4, "load": {"current_a": 2.9006500000000006}}], "record_every": 1} | Physical Failure: 'current_a' 2.9006500000000006 A is above 2.90065 A, the inclusive maximum of the cell_18650pf card (CurrentNotCompared). That state is not sealed. | true |
edge-d38981db8538 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.current_a | A | false | 2.9 | declared_limit | down | 2.89917 | 400731800a7c5abf | 2.89917 | 400731800a7c5abe | 0 | true | CurrentChangedDuringDischarge | Physical Failure: 'current_a' 2.899169999999997 A is more than 0.00083 A from the held current, the 2.9 A of 'held_current_a': a run of the cell_18650pf card is one discharge at one held current, as the tester holds it (CurrentChangedDuringDischarge). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 5ef8117dd3193d3fb7f579c590ed61fe740f2e04347c0b1ac9e2a69339d32ee5 | null | 5c7a3953bf444ac6fab48f12ab1e964b59a81b30574776831bfee8a0b44f6b0e | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:05Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 2, "load": {"current_a": 2.9}}, {"steps": 2, "load": {"current_a": 2.8991699999999976}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":2,"load":{"current_a":2.9}},{"steps":2,"load":{"current_a":2.8991699999999976}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_la... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 2, "load": {"current_a": 2.9}}, {"steps": 2, "load": {"current_a": 2.899169999999997}}], "record_every": 1} | Physical Failure: 'current_a' 2.899169999999997 A is more than 0.00083 A from the held current, the 2.9 A of 'held_current_a': a run of the cell_18650pf card is one discharge at one held current, as the tester holds it (CurrentChangedDuringDischarge). That state is not sealed. | true |
edge-fcf61fcf8f36 | energy/cell_18650pf | energy | cell_18650pf | run_trajectory | One Panasonic NCR18650PF cell in a held 1C discharge from full charge, with no temperature and no memory of the load before (a real cell's voltage relaxes for minutes after a change of load); it takes only the 1C currents compared with measurement, 2.89817 to 2.90065 A. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.current_a | A | false | 2.9 | declared_limit | up | 2.90065 | 40073487fcb923a3 | 2.90065 | 40073487fcb923a4 | 0 | true | CurrentNotCompared | Physical Failure: 'current_a' 2.9006500000000006 A is above 2.90065 A, the inclusive maximum of the cell_18650pf card (CurrentNotCompared). That state is not sealed. | before the run | null | completed | stopped before the first step | 4 | null | run_seal | 26d302b3c66541103811fdc1f5cce41905b332f42fe781813c8143f8f356aef7 | null | cf9d76c0e7c3569c42eb8c7eb419f39cea7f82e13399a72014b44e25cef0564b | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:06Z | 2026-10-14 | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 2, "load": {"current_a": 2.9}}, {"steps": 2, "load": {"current_a": 2.90065}}], "record_every": 1} | {"inputs":{"domain":"energy","card":"cell_18650pf","initial":{"soc":1.0,"held_current_a":2.9},"dt_s":17.436,"segments":[{"steps":2,"load":{"current_a":2.9}},{"steps":2,"load":{"current_a":2.90065}}],"record_every":1},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":4,"steps_landed":4,"re... | {"domain": "energy", "card": "cell_18650pf", "initial": {"soc": 1.0, "held_current_a": 2.9}, "dt_s": 17.436, "segments": [{"steps": 2, "load": {"current_a": 2.9}}, {"steps": 2, "load": {"current_a": 2.9006500000000006}}], "record_every": 1} | Physical Failure: 'current_a' 2.9006500000000006 A is above 2.90065 A, the inclusive maximum of the cell_18650pf card (CurrentNotCompared). That state is not sealed. | true |
edge-5b9e01e03235 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | initial.block_chamber_c | degC | false | 25 | declared_limit | down | 25 | 4039000000000000 | 25 | 4038ffffffffffff | 0 | true | BlockNotRecognized | Physical Failure: 'block_chamber_c' 24.999999999999996 degC is not one of the six chamber settings 40, 25, 10, 0, -10 and -20 degC of the cell_2170_m80 card (BlockNotRecognized). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | f23612a13c1eb3dea1ac104d676343c0a5bf541c60a4bddd2bea068ee38160d8 | null | 59f15272821d60578befe1cd62faf613d229b756d53af53ea20d174cc55482be | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:08Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_landed"... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 24.999999999999996, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Failure: 'block_chamber_c' 24.999999999999996 degC is not one of the six chamber settings 40, 25, 10, 0, -10 and -20 degC of the cell_2170_m80 card (BlockNotRecognized). That state is not sealed. | true |
edge-b0e5e2c96159 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | initial.block_chamber_c | degC | false | 25 | declared_limit | up | 25 | 4039000000000000 | 25 | 4039000000000001 | 0 | true | BlockNotRecognized | Physical Failure: 'block_chamber_c' 25.000000000000004 degC is not one of the six chamber settings 40, 25, 10, 0, -10 and -20 degC of the cell_2170_m80 card (BlockNotRecognized). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | f23612a13c1eb3dea1ac104d676343c0a5bf541c60a4bddd2bea068ee38160d8 | null | 59f15272821d60578befe1cd62faf613d229b756d53af53ea20d174cc55482be | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:08Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_landed"... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.000000000000004, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Failure: 'block_chamber_c' 25.000000000000004 degC is not one of the six chamber settings 40, 25, 10, 0, -10 and -20 degC of the cell_2170_m80 card (BlockNotRecognized). That state is not sealed. | true |
edge-d54b7b188656 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | initial.charge_removed_ah | Ah | false | 0 | declared_limit | down | -0.02 | bf947ae147ae167b | -0.02 | bf947ae147ae167c | 0 | true | ChargeOutsideTables | Physical Failure: 'charge_removed_ah' -0.02000000000000178 Ah is below -0.02 Ah, the inclusive minimum of the cell_2170_m80 card (ChargeOutsideTables). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | b61b52342fe5395d565022c58c079e57a629739f443a100bf035edc679a36682 | null | 785789a822121de3a10df8e30fc4f246b468c0412761f841d46708c502e495bb | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:11Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": -0.020000000000001777}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":-0.020000000000001777},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": -0.02000000000000178}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Failure: 'charge_removed_ah' -0.02000000000000178 Ah is below -0.02 Ah, the inclusive minimum of the cell_2170_m80 card (ChargeOutsideTables). That state is not sealed. | true |
edge-225ee53a18d0 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | initial.charge_removed_ah | Ah | false | 0 | declared_limit | up | 3.965201 | 400fb8bb826f344e | 3.965201 | 400fb8bb826f344f | 0 | true | LowerVoltageLimit | Physical Failure: the cell's voltage would fall below the 2.8 V lower limit (LowerVoltageLimit). The run is sealed to step 599. The state at step 600 was refused and is not sealed. | part way | null | completed | refused | 600 | 599 | run_seal | c3b7543d9834b7865b0db82d42f51574aa0cf4ee2b50c2a78d38fb229319de5c | 702a826919186cc77c47a4f58e058745e86f321fe75a55fbd3d92170ad6c4062 | 205b72ca00febbeda8a85a436f9151eceb778669fff82255d8254a6c6294c4f0 | 8bae72cafbfef5a240ae277c8446a06f5b8437b8067e2ac6a0c42c12eb0119f6 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:12Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 3.965201396006285}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":3.965201396006285},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 3.9652013960062855}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":3.9652013960062855},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":600,"... | false |
edge-d175747b340c | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | dt_s | s | false | 1 | declared_limit | down | 1 | 3ff0000000000000 | 1 | 3fefffffffffffff | 0 | true | StepNotOneSecond | Physical Violation: 'dt_s' 0.9999999999999999 is below 1 s, the step floor of the cell_2170_m80 card (StepNotOneSecond). | before the run | null | completed | stopped before the first step | 600 | null | run_seal | f23612a13c1eb3dea1ac104d676343c0a5bf541c60a4bddd2bea068ee38160d8 | null | 59f15272821d60578befe1cd62faf613d229b756d53af53ea20d174cc55482be | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:08Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_landed"... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 0.9999999999999999, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Violation: 'dt_s' 0.9999999999999999 is below 1 s, the step floor of the cell_2170_m80 card (StepNotOneSecond). | true |
edge-b363a4e69ed6 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | dt_s | s | false | 1 | declared_limit | up | 1 | 3ff0000000000000 | 1 | 3ff0000000000001 | 0 | true | StepNotOneSecond | Physical Violation: 'dt_s' 1.0000000000000002 is above 1 s, the step ceiling of the cell_2170_m80 card (StepNotOneSecond). | before the run | null | completed | stopped before the first step | 600 | null | run_seal | f23612a13c1eb3dea1ac104d676343c0a5bf541c60a4bddd2bea068ee38160d8 | null | 59f15272821d60578befe1cd62faf613d229b756d53af53ea20d174cc55482be | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:08Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_landed"... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0000000000000002, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Violation: 'dt_s' 1.0000000000000002 is above 1 s, the step ceiling of the cell_2170_m80 card (StepNotOneSecond). | true |
edge-d7821d44bc89 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | segments[0].steps | steps | true | 600 | declared_limit | up | 6,944 | 40bb200000000000 | 6,945 | 40bb210000000000 | 1 | false | LowerVoltageLimit | Physical Failure: the cell's voltage would fall below the 2.8 V lower limit (LowerVoltageLimit). The run is sealed to step 6944. The state at step 6945 was refused and is not sealed. | part way | null | completed | refused | 6,944 | 6,944 | run_seal | 356f35658659199a544ac0e259407d5fa278cb409f1b683a19e93b4d387b8b06 | 072b89835b96ff927643477ed5c114c2995442bafb3a187c9ac7ccf39742a70b | b005d5566af627ed409e253097a37b3f11e2937413b47f55f5f96a13b10d7930 | 549cb746c4a59cb4a26030e7e22c713cf93b3ccecc6635c69774397330cc13e5 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:16Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 6944, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":6944,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":6944,"steps_lande... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 6945, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":6945,"load":{"current_a":-2.25,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":6945,"steps_landed"... | false |
edge-ec23902374c7 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | segments[0].load.current_a | A | false | -2.25 | declared_limit | down | -9.23 | c02275c28f5c28f6 | -9.23 | c02275c28f5c28f7 | 0 | true | CurrentOutsideBlock | Physical Failure: 'current_a' -9.230000000000002 A is outside [-9.23, 9.484] A, the currents at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CurrentOutsideBlock). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | a4be9aa64475e48bb185092114840d6b82313c64be38fd69cfef95ec522550c4 | null | ccf081fe3512d2b7647b4d132d15c0abf72d55128fd5f311274986d7e7e0acd5 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:18Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -9.23, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-9.23,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_landed"... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -9.230000000000002, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Failure: 'current_a' -9.230000000000002 A is outside [-9.23, 9.484] A, the currents at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CurrentOutsideBlock). That state is not sealed. | true |
edge-c22cbb60bbf9 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | segments[0].load.current_a | A | false | -2.25 | declared_limit | up | 0.12 | 3fbeb851eb88a560 | 0.12 | 3fbeb851eb88a561 | 0 | true | ChargeOutsideTables | Physical Failure: the charge removed would leave the tables of the block (ChargeOutsideTables). The run is sealed to step 599. The state at step 600 was refused and is not sealed. | part way | null | completed | refused | 600 | 599 | run_seal | dd44d9ca6f221d111c4a81acd30a375c0f94dbbcab02e34a2e0c2d817a4a8eb3 | 9aa67cc882d8be272e594bdc725a081a3d39db601dd45a10046ed20715719764 | b0c71e41ceef6f597911c489ffa6376325dbb19a0a9e0865754d8b2237f1ed66 | a664ae2b05ff8257fe9d103416829e8adb487353aaef4e687e11e5cf7e6b2f64 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:19Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": 0.12000000000320687, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":0.12000000000320687,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": 0.12000000000320689, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":0.12000000000320689,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"refused","steps_requested":600,"s... | false |
edge-24b85c305446 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | segments[0].load.case_temperature_c | degC | false | 25 | declared_limit | down | 24.267 | 4038445a1cac0831 | 24.267 | 4038445a1cac0830 | 0 | true | CaseTemperatureOutsideBlock | Physical Failure: 'case_temperature_c' 24.266999999999996 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | 39cddd3f723ccfdc691a4eaf00348dfaa55ed7491e0005beeeab9a326c991bb8 | null | c7af0b25b1d07dc570325676eec4cf2c1902f9bed676636ff26859bc3770de07 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:21Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 24.267}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":24.267}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_lande... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 24.266999999999996}}], "record_every": 60} | Physical Failure: 'case_temperature_c' 24.266999999999996 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | true |
edge-0c8dd76c788c | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | segments[0].load.case_temperature_c | degC | false | 25 | declared_limit | up | 30.993 | 403efe353f7ced91 | 30.993 | 403efe353f7ced92 | 0 | true | CaseTemperatureOutsideBlock | Physical Failure: 'case_temperature_c' 30.993000000000002 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | e80288a1400b58eeb0970061b9c2a41d8ecebec3cad08efd4512892142db24c5 | null | 536015a45a1585837e3ac7262ddef9159375aa96eec1ba780558e13a659e29ef | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:23Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 30.993}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":-2.25,"case_temperature_c":30.993}}],"record_every":60},"engine_version":"genesis_kernel_v0.9.0","outcome":"completed","steps_requested":600,"steps_lande... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": -2.25, "case_temperature_c": 30.993000000000002}}], "record_every": 60} | Physical Failure: 'case_temperature_c' 30.993000000000002 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | true |
edge-6cb66285f938 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.current_a | A | false | -2.25 | declared_limit | down | -9.23 | c02275c28f5c28f6 | -9.23 | c02275c28f5c28f7 | 0 | true | CurrentOutsideBlock | Physical Failure: 'current_a' -9.230000000000002 A is outside [-9.23, 9.484] A, the currents at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CurrentOutsideBlock). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | 8512d5639b13103364f37f643221888fb3993b0670c86842475099dd9ae7d352 | null | 03bd7dbd578771de46768667427af01dcf7a22e2e1940cd9466f886e06ea0226 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:25Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": -9.23, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":25.0}},{"steps":300,"load":{"current_a":-9.23,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"genesis_kernel... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": -9.230000000000002, "case_temperature_c": 25.0}}], "record_every": 60} | Physical Failure: 'current_a' -9.230000000000002 A is outside [-9.23, 9.484] A, the currents at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CurrentOutsideBlock). That state is not sealed. | true |
edge-89416e5b1c7d | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.current_a | A | false | -2.25 | declared_limit | up | 1.568015 | 3ff91696f41bdd71 | 1.568015 | 3ff91696f41bdd72 | 0 | true | UpperVoltageLimit | Physical Failure: the cell's voltage would rise above the 4.242 V upper limit (UpperVoltageLimit). The run is sealed to step 599. The state at step 600 was refused and is not sealed. | part way | null | completed | refused | 600 | 599 | run_seal | 76ad6d18ac241fe7ba11f509c97b6559fc5c1b562399b5fa545b9aa36add4ecf | e2c9a14c7093138a9cf44b3f7e727b0bac939661e7d3b0319f0da9ad5f57dc8a | da6ffc31ea57154ed0e77352a3401fc5e703a67c17c32b6807aadf4e70e6816c | 6fcafa6545dfcca3f4543978bdc9e3b52ef03b12d007a1193e578fbb0f7d9a75 | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:26Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": 1.568015054273783, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":25.0}},{"steps":300,"load":{"current_a":1.568015054273783,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"ge... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": 1.5680150542737832, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":25.0}},{"steps":300,"load":{"current_a":1.5680150542737832,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"g... | false |
edge-011ab1c4b150 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.case_temperature_c | degC | false | 25 | declared_limit | down | 24.267 | 4038445a1cac0831 | 24.267 | 4038445a1cac0830 | 0 | true | CaseTemperatureOutsideBlock | Physical Failure: 'case_temperature_c' 24.266999999999996 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | 710d8cf9cff8dfd9b7bc08e2b844d8e10293860ad42fe353b58407ae51898a79 | null | f78f708aa901d08f64d3f6983e4eec4b12e59359ee03edfba246e1c8c1d1fe25 | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:28Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 24.267}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":25.0}},{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":24.267}}],"record_every":60},"engine_version":"genesis_kern... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 24.266999999999996}}], "record_every": 60} | Physical Failure: 'case_temperature_c' 24.266999999999996 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | true |
edge-cc03cccc9515 | energy/cell_2170_m80 | energy | cell_2170_m80 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, cell m80 alone, from 0 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory, its one segment cut into two of the same load | segments[1].load.case_temperature_c | degC | false | 25 | declared_limit | up | 30.993 | 403efe353f7ced91 | 30.993 | 403efe353f7ced92 | 0 | true | CaseTemperatureOutsideBlock | Physical Failure: 'case_temperature_c' 30.993000000000002 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | 3d68b3a39abaacf35315a56c9dafdb59f14e36139dc8f09cffa58bf771bc50d4 | null | d8be719bda68e0172e4665639753e64fc87d73c8822e79c1b3cec3565b62ccde | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:30Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 30.993}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_m80","initial":{"block_chamber_c":25.0,"charge_removed_ah":0.0},"dt_s":1.0,"segments":[{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":25.0}},{"steps":300,"load":{"current_a":-2.25,"case_temperature_c":30.993}}],"record_every":60},"engine_version":"genesis_kern... | {"domain": "energy", "card": "cell_2170_m80", "initial": {"block_chamber_c": 25.0, "charge_removed_ah": 0.0}, "dt_s": 1.0, "segments": [{"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 25.0}}, {"steps": 300, "load": {"current_a": -2.25, "case_temperature_c": 30.993000000000002}}], "record_every": 60} | Physical Failure: 'case_temperature_c' 30.993000000000002 degC is outside [24.267, 30.993] degC, the case temperatures at which the 25 degC block of the cell_2170_m80 card was compared with measurement (CaseTemperatureOutsideBlock). That state is not sealed. | true |
edge-14797ab84743 | energy/cell_2170_model3 | energy | cell_2170_model3 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, any of the three cells m80, m1000 and m448-N of its dataset, as a physical model with memory, from -10 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | initial.cell_number | 1 | false | 80 | declared_limit | down | 80 | 4054000000000000 | 80 | 4053ffffffffffff | 0 | true | CellNotRecognized | Physical Failure: 'cell_number' 79.99999999999999 is below 80, the inclusive minimum of the cell_2170_model3 card (CellNotRecognized). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | dee34d01a462dadd230b945cd14ffb1dda3dac6296e371db83abd6f29ed941cc | null | 91076f100fe21043ddbf43a8b42a560817b6d31331d44d4d9b135ef73881ce4f | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:32Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_model3", "initial": {"cell_number": 80.0, "state_of_charge": 1.0, "capacity_ah": 4.5006, "case_temperature_least_c": 25.0, "case_temperature_most_c": 25.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": 4.5, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_model3","initial":{"cell_number":80.0,"state_of_charge":1.0,"capacity_ah":4.5006,"case_temperature_least_c":25.0,"case_temperature_most_c":25.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":4.5,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"ge... | {"domain": "energy", "card": "cell_2170_model3", "initial": {"cell_number": 79.99999999999999, "state_of_charge": 1.0, "capacity_ah": 4.5006, "case_temperature_least_c": 25.0, "case_temperature_most_c": 25.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": 4.5, "case_temperature_c": 25.0}}], "record_eve... | Physical Failure: 'cell_number' 79.99999999999999 is below 80, the inclusive minimum of the cell_2170_model3 card (CellNotRecognized). That state is not sealed. | true |
edge-832ae437a35a | energy/cell_2170_model3 | energy | cell_2170_model3 | run_trajectory | One Tesla Model 3 2170 lithium-ion cell, any of the three cells m80, m1000 and m448-N of its dataset, as a physical model with memory, from -10 to 40 degC, under a terminal current and a measured case temperature. | example_run_trajectory | initial.cell_number | 1 | false | 80 | declared_limit | up | 80 | 4054000000000000 | 80 | 4054000000000001 | 0 | true | CellNotRecognized | Physical Failure: 'cell_number' 80.00000000000001 is not one of the cells of the cell_2170_model3 card, 80 (cell m80), 1000 (cell m1000) and 448 (cell m448-N) (CellNotRecognized). That state is not sealed. | before the run | null | completed | stopped before the first step | 600 | null | run_seal | dee34d01a462dadd230b945cd14ffb1dda3dac6296e371db83abd6f29ed941cc | null | 91076f100fe21043ddbf43a8b42a560817b6d31331d44d4d9b135ef73881ce4f | null | genesis_kernel_v0.9.0 | https://mcp.zerotrustphysics.com/mcp | 2026-10-14T02:22:32Z | 2026-10-14 | {"domain": "energy", "card": "cell_2170_model3", "initial": {"cell_number": 80.0, "state_of_charge": 1.0, "capacity_ah": 4.5006, "case_temperature_least_c": 25.0, "case_temperature_most_c": 25.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": 4.5, "case_temperature_c": 25.0}}], "record_every": 60} | {"inputs":{"domain":"energy","card":"cell_2170_model3","initial":{"cell_number":80.0,"state_of_charge":1.0,"capacity_ah":4.5006,"case_temperature_least_c":25.0,"case_temperature_most_c":25.0},"dt_s":1.0,"segments":[{"steps":600,"load":{"current_a":4.5,"case_temperature_c":25.0}}],"record_every":60},"engine_version":"ge... | {"domain": "energy", "card": "cell_2170_model3", "initial": {"cell_number": 80.00000000000001, "state_of_charge": 1.0, "capacity_ah": 4.5006, "case_temperature_least_c": 25.0, "case_temperature_most_c": 25.0}, "dt_s": 1.0, "segments": [{"steps": 600, "load": {"current_a": 4.5, "case_temperature_c": 25.0}}], "record_eve... | Physical Failure: 'cell_number' 80.00000000000001 is not one of the cells of the cell_2170_model3 card, 80 (cell m80), 1000 (cell m1000) and 448 (cell m448-N) (CellNotRecognized). That state is not sealed. | true |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.