{"id": "g3-budget-grasp-least-grip-at-6.1-t4", "family": "budget", "kind": "budgeted_search", "models": ["materials/grasp_lift_glass_4tu"], "real_thing": "Lift of a glass-faced object from a table between two finger pads: a company specimen object, 0.2 kg with two vertical glass faces 60 mm tall, gripped at their middle by two pads with the friction and stiffness of the 4TU set's human index finger pads on glass, each a Cattaneo-Mindlin contact that sticks, slips at its edge and slides whole: the object's height and velocity, each pad's force, travel and stuck fraction, and whether the grip slips. Compared with the trials not in the fit, S2, S3 and S12 whole and level 4 of S4 to S11: on the 12 trials on natural glass of three fingers at 0.74 to 2.67 N, the card's friction within 22.2 percent median (target 10; a constant force 31.5, each finger's own coefficient 8.8) and its plate travel to full slip within 38.1 percent median (target 18; a constant travel 33.8); over 116 trials the lateral force at the onset of full slip within 6.7 percent median of the trial's own sliding friction times its normal force (target 10), one coefficient serving for static and kinetic friction. Gap: the stuck-fraction law, the stick ratio as the safety margin to the power 2/3, is off the measured stick ratio at 1 mm by 0.389 RMS over 16,126 samples of incipient slip (target 0.10; the ratio equal to the margin, 0.334); on the fingers not in the fit S2 reads 21 to 35 percent low in friction and S12 up to 25 percent high.", "task": "A 0.2 kg glass-faced object stands on a table between two finger pads with the friction and stiffness of the 4TU set's index finger pads on glass (grasp_lift_glass_4tu), the hand at rest. The hand then accelerates upward at 6.1 m/s^2 for 0.33 s (440 steps of 0.75 ms) with one constant grip force. Below some grip force the object slips out of the grip (ObjectSlippedOut). Find that grip force, in newtons.\n\nFind it: a value that completes and a value that stops with ObjectSlippedOut, no more than 0.00013 percent of the value apart. It lies between 1.7 and 2.6 N.\n\nThe request, with the one input you change:\n{\"tool\": \"run_trajectory\", \"arguments\": {\"domain\": \"materials\", \"card\": \"grasp_lift_glass_4tu\", \"initial\": {\"hand_velocity_m_s\": 0.0}, \"dt_s\": 0.00075, \"segments\": [{\"steps\": 440, \"load\": {\"grip_force_n\": \"\", \"hand_acceleration_m_s2\": 6.1}}], \"record_every\": 440}}\n\nBudget: at most 4 calls that compute, counted over every call you make; list_cards, list_solvers, find_model, describe_card, describe_solver, cite and verify_receipt are free. find_flip, design_run, run_dataset and validate_series may not be called at all. Both requests on your card must be among your calls.", "check": {"tool": "run_trajectory", "template": {"domain": "materials", "card": "grasp_lift_glass_4tu", "initial": {"hand_velocity_m_s": 0.0}, "dt_s": 0.00075, "segments": [{"steps": 440, "load": {"grip_force_n": null, "hand_acceleration_m_s2": 6.1}}], "record_every": 440}, "variable": "segments[0].load.grip_force_n", "also": [], "stop": "ObjectSlippedOut", "relative_width": 1.3e-06, "budget": 4, "forbidden": ["find_flip", "design_run", "run_dataset", "validate_series"]}, "seed": {"kind": "fluids_cryogenics_hydraulics_contact", "note": "A stop located by halving on the engine; the span seeded; the task rules the search tools out and allows 4 computing calls.", "seed": 2026102903}, "reference": {"boundary": 1.9940754642794416, "bisect_width": 1.4004353232621725e-12, "holds": {"x": 1.9940762419688727, "request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "grasp_lift_glass_4tu", "initial": {"hand_velocity_m_s": 0.0}, "dt_s": 0.00075, "segments": [{"steps": 440, "load": {"grip_force_n": 1.9940762419688727, "hand_acceleration_m_s2": 6.1}}], "record_every": 440}}, "proof": "96404c34c71a12d4737e9745eb82fedced05b1e93044caf91115f149b9f235e7016e58f42f40b6bf2118b3565d912c6e", "outcome": "completed", "steps_landed": 440}, "stops": {"x": 1.9940746865900105, "request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "grasp_lift_glass_4tu", "initial": {"hand_velocity_m_s": 0.0}, "dt_s": 0.00075, "segments": [{"steps": 440, "load": {"grip_force_n": 1.9940746865900105, "hand_acceleration_m_s2": 6.1}}], "record_every": 440}}, "proof": "7368e23e615ee2ade26b20494f2696a813cc917a1d526f1b338a9a5312610f2f51dd8f242b14471e031cc0a9809aeacb", "outcome": "ended", "steps_landed": 324}, "span_pattern": "sssssssssssssssssssssssssshhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh", "scan_pattern": "ssssssssshhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh", "span": [1.7, 2.6], "engine_source": "https://github.com/johnkruze/zero-trust-physics-engine", "engine_tag": "v0.15.3", "engine_commit": "664d68f426ccdfd0159e5f91857edba3872390d1", "gateway_version": "0.15.3", "engine_binary_sha256": "2569d8f69b023f7e7fe441c31d3f69ea94d9adfa8100d6e7e56855768c147076", "near_pattern": "ssssssssssssssssssssshhhhhhhhhhhhhhhhhhhh"}} {"id": "g3-chain-column-feeds-line-fastest-flow-t3", "family": "chain_design", "kind": "chained_design", "models": ["materials/hydraulic_fluid", "water_hammer_oil_line"], "real_thing": "Company specimen: a 0.50 m mineral-oil column in a 50 mm bore, bulk modulus 1.72 GPa and density 870 kg/m^3, charged at one atmosphere, under a commanded flow, from its vapour pressure of 10 Pa to 20.74 MPa absolute. / Company specimen: water hammer in a 4.0 m steel hydraulic line (12 x 1.5 mm tube, 9 mm bore) of mineral oil (870 kg/m^3, 1.72 GPa) between a held supply and a valve that closes: the steady flow, then the transient by the method of characteristics on 40 sections with Churchill's friction, free air lumped at the nodes as isothermal gas (the wave speed falls by Wood's relation) and column separation where the pressure would fall below the vapour pressure; the Joukowsky rise as tangent and chord of the gas law; energy (kinetic, oil compression, wall strain, cavities, friction, valve) and volume ledgers closed at every step; stops by name at the tube's first yield (51.41 MPa gauge), at Mach 0.1 and where the free air exceeds a void fraction of 0.25. Its method was run on two measured lines with their own constants. On the Gdansk copper water rig, given the rig's measured wave speeds, it gives the free-oscillation period within 0.28 percent in four runs; its own wave speed law is 6.1 to 8.6 percent high there, and with it the period is 5.5 to 7.7 percent short. On DLR's liquid-nitrogen line Joukowsky's closed form is within 5 percent in 6 of 9 tests, low by up to 6.9 percent (target 8 of 9); that line is served as ln2_line_dlr_fttf.", "task": "A 0.50 m column of mineral oil in a 50 mm bore (bulk modulus 1.72 GPa, density 870 kg/m^3), the company specimen served as hydraulic_fluid, is driven by a commanded flow. The pressure it reaches supplies a 4.0 m steel hydraulic line (12 x 1.5 mm tube, 9 mm bore) of the same oil, the company specimen served as water_hammer_oil_line, whose valve then closes on a steady flow. The column starts at 240,000 Pa and is charged for 2.009 ms (980 steps of 2.05 microseconds) at 0.0031 m^3/s. The line returns at 0.36 MPa with no free air, its valve closes in 2.6 ms and the transient is followed for 50 ms; the line's steady flow velocity is yours to choose.\n\nFind the largest line's steady flow velocity, in m/s, from 0.5 to 12 m/s, for which every constraint below holds. Give the passing design and the first failing design, no more than 0.00019 m/s apart, and name the constraint that binds.\n\nConstraints (id (the request it is read from): what, limit):\n- line_valve_peak (line): the highest pressure at the valve over the transient, in pascals (absolute), at or below 19916700 Pa\n- line_line_low (line): the lowest pressure anywhere on the line over the transient, in pascals (absolute), at or above 4258640 Pa\nEach design is two requests: the column's run, then the line's solve, whose supply_pressure_pa is the column's final pressure (final_state.pressure_pa of the column's answer), bit for bit.\ncolumn (it must complete):\n{\"tool\": \"run_trajectory\", \"arguments\": {\"domain\": \"materials\", \"card\": \"hydraulic_fluid\", \"initial\": {\"pressure_pa\": 240000.0}, \"dt_s\": 2.05e-06, \"segments\": [{\"steps\": 980, \"load\": {\"flow_m3_s\": 0.0031}}], \"record_every\": 980}}\nline (it must converge):\n{\"tool\": \"solve\", \"arguments\": {\"solver\": \"water_hammer_oil_line\", \"parameters\": {\"supply_pressure_pa\": \"\", \"return_pressure_pa\": 360000.0, \"initial_velocity_m_s\": \"\", \"closure_time_s\": 0.0026, \"free_air_fraction\": 0.0, \"duration_s\": 0.05, \"return_histories\": false}}}\n\nBudget: at most 4 calls that compute, counted over every call you make, each run and each solve one call; list_cards, list_solvers, find_model, describe_card, describe_solver, cite and verify_receipt are free. find_flip, design_run, run_dataset and validate_series may not be called at all. Every request on your card must be among your calls.", "check": {"design": {"variable": {"kind": "path", "stage": "line", "path": "parameters.initial_velocity_m_s", "words": "the line's steady flow velocity, in m/s"}, "stages": [{"key": "column", "tool": "run_trajectory", "template": {"domain": "materials", "card": "hydraulic_fluid", "initial": {"pressure_pa": 240000.0}, "dt_s": 2.05e-06, "segments": [{"steps": 980, "load": {"flow_m3_s": 0.0031}}], "record_every": 980}, "outcomes": ["completed"]}, {"key": "line", "tool": "solve", "template": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": null, "return_pressure_pa": 360000.0, "initial_velocity_m_s": null, "closure_time_s": 0.0026, "free_air_fraction": 0.0, "duration_s": 0.05, "return_histories": false}}, "outcomes": ["converged"], "handed": [{"to": "parameters.supply_pressure_pa", "from": "column", "read": {"kind": "final", "quantity": "pressure_pa"}}]}], "direction": "largest", "tolerance": 0.00019, "units": "m/s", "range": [0.5, 12.0]}, "constraints": [{"id": "line_valve_peak", "on": "line", "read": {"kind": "result", "quantity": "valve_pressure_max_pa"}, "op": "<=", "words": "the highest pressure at the valve over the transient, in pascals (absolute)", "unit": "Pa", "limit": 19916700.0}, {"id": "line_line_low", "on": "line", "read": {"kind": "result", "quantity": "line_pressure_min_pa"}, "op": ">=", "words": "the lowest pressure anywhere on the line over the transient, in pascals (absolute)", "unit": "Pa", "limit": 4258640.0}], "budget": 4, "forbidden": ["find_flip", "design_run", "run_dataset", "validate_series"]}, "seed": {"kind": "fluids_cryogenics_hydraulics_contact", "note": "Limits set at seeded designs near chosen targets; the window sampled and the boundary bisected on the engine.", "seed": 2026102903}, "reference": {"boundary": 6.073486401172653, "binding": "line_line_low", "window_pattern": "HHHHHHHHHHHHHHHHHHHHHHHHHHHHHH...............................", "constraint_patterns": {"line_valve_peak": "+++++++++++++++++++++++++++++++++++++------------------------", "line_line_low": "++++++++++++++++++++++++++++++-------------------------------"}, "band": [0.5, 6.058333333333334], "near_pattern": "HHHHHHHHHHHHHHHHHHHH.....................", "bisect_width": 1.0681153739255933e-09, "passing": {"x": 6.073429401172653, "values": {"line_valve_peak": 18302319.821494162, "line_line_low": 4258704.644280216}, "design": {"column": {"request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "hydraulic_fluid", "initial": {"pressure_pa": 240000.0}, "dt_s": 2.05e-06, "segments": [{"steps": 980, "load": {"flow_m3_s": 0.0031}}], "record_every": 980}}, "proof": "fd137209c48e7ec3c7ecd932c3f6eee75f62bde15d93858a4b933ae7a0abc1d7a5bc115298bff203a3497c0189afc242"}, "line": {"request": {"tool": "solve", "arguments": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": 11151141.379462916, "return_pressure_pa": 360000.0, "initial_velocity_m_s": 6.073429401172653, "closure_time_s": 0.0026, "free_air_fraction": 0.0, "duration_s": 0.05, "return_histories": false}}}, "proof": "cda390f33f71472fb8d808dfc05be182f56b6f61d181c6ad128f3488fa604f8c77463ae1175accb044b6bbc1ac702b31"}}}, "failing": {"x": 6.073543401172653, "values": {"line_valve_peak": 18302453.96607719, "line_line_low": 4258575.354890122}, "design": {"column": {"request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "hydraulic_fluid", "initial": {"pressure_pa": 240000.0}, "dt_s": 2.05e-06, "segments": [{"steps": 980, "load": {"flow_m3_s": 0.0031}}], "record_every": 980}}, "proof": "fd137209c48e7ec3c7ecd932c3f6eee75f62bde15d93858a4b933ae7a0abc1d7a5bc115298bff203a3497c0189afc242"}, "line": {"request": {"tool": "solve", "arguments": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": 11151141.379462916, "return_pressure_pa": 360000.0, "initial_velocity_m_s": 6.073543401172653, "closure_time_s": 0.0026, "free_air_fraction": 0.0, "duration_s": 0.05, "return_histories": false}}}, "proof": "0cd9de61dd87ee78b968bccfde5a272d2466907aaf98e43d97f52fbe2c2ede4ab6ede8d0206daf7d82392f0056529a01"}}, "broken": ["line_line_low"], "stopped": null, "stopped_stage": null, "steps_landed": null}, "engine_source": "https://github.com/johnkruze/zero-trust-physics-engine", "engine_tag": "v0.15.3", "engine_commit": "664d68f426ccdfd0159e5f91857edba3872390d1", "gateway_version": "0.15.3", "engine_binary_sha256": "2569d8f69b023f7e7fe441c31d3f69ea94d9adfa8100d6e7e56855768c147076"}} {"id": "g3-limit-chamber-highest-reservoir-t2", "family": "tradeoff", "kind": "design_to_limit", "models": ["orifice_air_chamber"], "real_thing": "Company specimen: a rigid 100 cm^3 chamber of air charged or vented through a pneumatic valve in the ISO 6358-1:2013 form (sonic conductance 1.0e-8 m^3/(s Pa), critical pressure ratio 0.30, subsonic index 0.5), with heat exchanged with the wall at 293.15 K: pressure, temperature and mass flow over time, choked and subsonic flow as regimes, the chamber reaching the reservoir's pressure in a finite time; mass and energy ledgers closed at every step and the entropy generated, the valve's throttling either way among it, never falling; stops by name at the valve's rating and where slip flow begins at the valve's throat.", "task": "A rigid 100 cm^3 chamber of air is charged through a pneumatic valve (sonic conductance 1.0e-8 m^3/(s Pa), critical pressure ratio 0.30), the company specimen served as orifice_air_chamber. The chamber starts at 98,700 Pa and is charged for 0.42 s from a reservoir at a pressure that you choose.\n\nFind the largest reservoir's pressure, in pascals, from 180000 to 1100000 Pa, for which every constraint below holds. Give the passing design and the first failing design, no more than 9 Pa apart, and name the constraint that binds.\n\nConstraints (id (the request it is read from): what, limit):\n- chamber_tmax (chamber): the hottest the chamber's air gets, in kelvin, at or below 380.8606 K\n- chamber_entropy (chamber): the entropy generated, in joules per kelvin, at or below 0.1429565 J/K\nEach design is one solve, named chamber on the card, which must converge:\n{\"tool\": \"solve\", \"arguments\": {\"solver\": \"orifice_air_chamber\", \"parameters\": {\"reservoir_pressure_pa\": \"\", \"chamber_start_pressure_pa\": 98700.0, \"duration_s\": 0.42, \"return_histories\": false}}}\n\nBudget: at most 4 calls that compute, counted over every call you make, each run and each solve one call; list_cards, list_solvers, find_model, describe_card, describe_solver, cite and verify_receipt are free. find_flip, design_run, run_dataset and validate_series may not be called at all. Every request on your card must be among your calls.", "check": {"design": {"variable": {"kind": "path", "stage": "chamber", "path": "parameters.reservoir_pressure_pa", "words": "the reservoir's pressure, in pascals"}, "stages": [{"key": "chamber", "tool": "solve", "template": {"solver": "orifice_air_chamber", "parameters": {"reservoir_pressure_pa": null, "chamber_start_pressure_pa": 98700.0, "duration_s": 0.42, "return_histories": false}}, "outcomes": ["converged"]}], "direction": "largest", "tolerance": 9.0, "units": "Pa", "range": [180000.0, 1100000.0]}, "constraints": [{"id": "chamber_tmax", "on": "chamber", "read": {"kind": "result", "quantity": "temperature_max_k"}, "op": "<=", "words": "the hottest the chamber's air gets, in kelvin", "unit": "K", "limit": 380.8606}, {"id": "chamber_entropy", "on": "chamber", "read": {"kind": "result", "quantity": "entropy_generated_j_k"}, "op": "<=", "words": "the entropy generated, in joules per kelvin", "unit": "J/K", "limit": 0.1429565}], "budget": 4, "forbidden": ["find_flip", "design_run", "run_dataset", "validate_series"]}, "seed": {"kind": "fluids_cryogenics_hydraulics_contact", "note": "Limits set at seeded designs near chosen targets; the window sampled and the boundary bisected on the engine.", "seed": 2026102903}, "reference": {"boundary": 623430.5437024683, "binding": "chamber_tmax", "window_pattern": "HHHHHHHHHHHHHHHHHHHHHHHHHHHHH................................", "constraint_patterns": {"chamber_tmax": "+++++++++++++++++++++++++++++--------------------------------", "chamber_entropy": "++++++++++++++++++++++++++++++++++++++++---------------------"}, "band": [180000.0, 609333.3333333333], "near_pattern": "HHHHHHHHHHHHHHHHHHHHH....................", "bisect_width": 4.76837158203125e-05, "passing": {"x": 623427.8437024683, "values": {"chamber_tmax": 380.8604917752049, "chamber_entropy": 0.10287279432492907}, "design": {"chamber": {"request": {"tool": "solve", "arguments": {"solver": "orifice_air_chamber", "parameters": {"reservoir_pressure_pa": 623427.8437024683, "chamber_start_pressure_pa": 98700.0, "duration_s": 0.42, "return_histories": false}}}, "proof": "e6dfdb666986cf67db8bdad399d23f82b8270035a031cf4b49c16b4ad9685ccea9a8f6175a324de8895189d3e6e6c57d"}}}, "failing": {"x": 623433.2437024682, "values": {"chamber_tmax": 380.86070822309756, "chamber_entropy": 0.10287411911725916}, "design": {"chamber": {"request": {"tool": "solve", "arguments": {"solver": "orifice_air_chamber", "parameters": {"reservoir_pressure_pa": 623433.2437024682, "chamber_start_pressure_pa": 98700.0, "duration_s": 0.42, "return_histories": false}}}, "proof": "396f40e214fc6c0113ba2d588775191d2a82ab4a934927d068d5e02354ffdfb358c24478eb1132dbc6ed0cb0c05c27fe"}}, "broken": ["chamber_tmax"], "stopped": null, "stopped_stage": null, "steps_landed": null}, "engine_source": "https://github.com/johnkruze/zero-trust-physics-engine", "engine_tag": "v0.15.3", "engine_commit": "664d68f426ccdfd0159e5f91857edba3872390d1", "gateway_version": "0.15.3", "engine_binary_sha256": "2569d8f69b023f7e7fe441c31d3f69ea94d9adfa8100d6e7e56855768c147076"}} {"id": "g3-forensics8-14", "family": "forensics", "kind": "forensics", "models": ["journal_bearing_sheffield", "materials/grasp_lift_glass_4tu", "materials/hydraulic_fluid", "materials/tire_eve_r19_ice", "orifice_air_chamber", "pipe_flow_superpipe", "pneumatic_hose_resonance", "propeller_apc_10x7e", "step_flow_armaly", "water_hammer_oil_line"], "real_thing": "Ten answers of the verifier over 10 models of fluids, cryogenics, hydraulics and contact.", "task": "A report hands you ten claims about answers of the verifier, on fluids, cryogenic lines, hydraulics and contact. Each row gives the model, the request as it was sent, what its answer is claimed to say and the proof claimed for it. claim.outcome and claim.stop are the run's or solve's outcome and the name of its stop or declared end (null when it completed or converged); claim.steps_landed is the last step a run is sealed to (null for a solve); claim.quantity and claim.value are one number of the final state of a run (of the result, for a solve); claim.flags are the advisory flags a run carried, each with the quantity it is on, its extent at the largest (extent) and the count of steps it was raised on (steps), as the verifier lists them in exceedance_extremes. A request with from continues a sealed run of the same card from its final state.\nSome rows are false. A false row may be wrong in more than one way; its reason is the first of these, in this order, that is true of it:\n1. retired_model: the request names a model ID the verifier no longer serves.\n2. parent_wrong: the request continues a run (from) that is not the parent it names: its start state, or the seal it gives for its parent, belongs to another run, and the verifier refuses the continuation.\n3. seal_wrong: the proof is not the seal of this request.\n4. stop_hidden: the run stops part way and the claim says it completed.\n5. step_wrong: the claim names the run's stop, but not the last step the run is sealed to.\n6. flag_omitted: the run carries an advisory flag (a name on a quantity) that the claim leaves out altogether.\n7. flag_altered: the flags the claim lists are not the run's, entry for entry: an extent or a count of steps differs, or an entry is missing or added where its name on that quantity is listed too (the verifier may list one flag on one quantity more than once, each with its own extent).\n8. value_altered: the claimed value is not the one the request gives, to the last digit.\nA row that is none of these is genuine, whatever else differs in how it is written (the order of its flags, a readout sent with the request, the spelling of a number). Name every false row with its reason.\nThe rows, one a line:\n{\"row\": \"R1\", \"model\": \"step_flow_armaly\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"step_flow_armaly\", \"parameters\": {\"reynolds_number\": 152.0, \"station_x_over_s\": 6.53}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"reattachment_mm\", \"value\": 19.270219258346195, \"flags\": []}, \"proof\": \"8e284e5aab8e13f5a40f6a712f72c9600dec43670442ad3b2eda9478c9edbc35b6c74e478d26e446aa8dc0efacb78df5\"}\n{\"row\": \"R2\", \"model\": \"propeller_apc_10x7e\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"propeller_apc_10x7e\", \"parameters\": {\"rotational_speed_rev_per_min\": 4593.36, \"airspeed_m_s\": 5.68233, \"air_density_kg_m3\": 1.23274}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"shaft_power_w\", \"value\": 30.821981009593387, \"flags\": []}, \"proof\": \"063e5ea4411e5ba8cd6a50d07e367df5b2ecc0882eda2de1f13128015a361c5c718d4c272f2e78f9e759d97b710a0120\"}\n{\"row\": \"R3\", \"model\": \"materials/grasp_lift_glass_4tu\", \"request\": {\"tool\": \"run_trajectory\", \"arguments\": {\"domain\": \"materials\", \"card\": \"grasp_lift_glass_4tu\", \"initial\": {\"hand_velocity_m_s\": 0.0}, \"dt_s\": 0.00073, \"segments\": [{\"steps\": 325, \"load\": {\"grip_force_n\": 2.77955, \"hand_acceleration_m_s2\": 3.87078}}], \"record_every\": 60, \"readout\": {\"quantities\": [\"object_height_m\"]}}}, \"claim\": {\"outcome\": \"completed\", \"stop\": null, \"steps_landed\": 325, \"quantity\": \"object_height_m\", \"value\": 0.10483140787139135, \"flags\": [{\"flag\": \"FLAG_INCIPIENT_SLIP\", \"quantity\": \"stuck_fraction\", \"extent\": 0.78125, \"steps\": 275}, {\"flag\": \"FLAG_INCIPIENT_SLIP\", \"quantity\": \"stuck_fraction\", \"extent\": 0.96875, \"steps\": 275}, {\"flag\": \"FLAG_ON_TABLE\", \"quantity\": \"object_height_m\", \"extent\": 0.0, \"steps\": 55}]}, \"proof\": \"4a77c42d5a9e6edc0aaa185f545e177527bb956d69502769f8014da8d09a326406bb42b1f3d1edcbf923c4f21c863a9e\"}\n{\"row\": \"R4\", \"model\": \"journal_bearing_sheffield\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"journal_bearing_sheffield\", \"parameters\": {\"load_n\": 11025.9, \"speed_rpm\": 660.75}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"peak_film_pressure_pa\", \"value\": 6294689.940144949, \"flags\": []}, \"proof\": \"297dc3f84b669c578254bd5d449fd6e6914c3419be6cad162c40aee240bac7a221825c2524726ce971232b27a849c83a\"}\n{\"row\": \"R5\", \"model\": \"materials/hydraulic_fluid\", \"request\": {\"tool\": \"run_trajectory\", \"arguments\": {\"domain\": \"materials\", \"card\": \"hydraulic_fluid\", \"initial\": {\"pressure_pa\": 1410310.0}, \"dt_s\": 1.92e-06, \"segments\": [{\"steps\": 535, \"load\": {\"flow_m3_s\": 0.00628443}}], \"record_every\": 85, \"readout\": {\"quantities\": [\"fluid_volume_m3\"]}}}, \"claim\": {\"outcome\": \"completed\", \"stop\": null, \"steps_landed\": 535, \"quantity\": \"fluid_volume_m3\", \"value\": 0.0009889502178466727, \"flags\": [{\"flag\": \"FLAG_COLUMN_LIMIT\", \"quantity\": \"compression_m\", \"extent\": 0.0006682100547350882, \"steps\": 109}, {\"flag\": \"FLAG_COLUMN_SOFT\", \"quantity\": \"compression_m\", \"extent\": 0.0018682100547350883, \"steps\": 305}]}, \"proof\": \"0350a82e09c57dda9e6bb2c63d10f83da28e3702d3a4d3caea00763bc5ce28063216f1394b2b5354febc516870371a56\"}\n{\"row\": \"R6\", \"model\": \"pipe_flow_superpipe\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"pipe_flow_superpipe\", \"parameters\": {\"bulk_reynolds_number\": 1984700.0, \"static_pressure_pa\": 1567520.0, \"temperature_k\": 294.78, \"wall_roughness_rms_um\": 0.126726}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"karman_number\", \"value\": 35920.45795653896, \"flags\": []}, \"proof\": \"17e191fd95040177dfe3630279aea511bc2c29882c5b3250241c36497944a62536aa0da88ea6cbb0f90d192b3cfc4254\"}\n{\"row\": \"R7\", \"model\": \"materials/tire_eve_r19_ice\", \"request\": {\"tool\": \"run_trajectory\", \"arguments\": {\"domain\": \"materials\", \"card\": \"tire_eve_r19_ice\", \"initial\": {\"distance_m\": 0.0, \"slip_held_s\": 6.60399}, \"dt_s\": 0.24, \"segments\": [{\"steps\": 42, \"load\": {\"normal_load_n\": 5383.54, \"inflation_pressure_pa\": 181502.0, \"slip_ratio\": 0.0670731, \"carriage_speed_m_s\": 0.0600112}}], \"record_every\": 42}}, \"claim\": {\"outcome\": \"completed\", \"stop\": null, \"steps_landed\": 42, \"quantity\": \"wheel_work_j\", \"value\": 839.6416183499539, \"flags\": []}, \"proof\": \"2ba3d256a4c6282820903e9960c2f43baf82b8f2f18560ce344e0d7549e9dc1ce923ec34de43cdabd723dc3d11c44c87\"}\n{\"row\": \"R8\", \"model\": \"pneumatic_hose_bergh\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"pneumatic_hose_bergh\", \"parameters\": {\"mean_pressure_pa\": 486619.0, \"frequencies_hz\": [20.1477, 51.9293, 199.636]}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"sound_speed_m_s\", \"value\": 343.23197767690584, \"flags\": []}, \"proof\": \"c66b7c542ac4e5f72c93868e5e85cee43c5a5064ad63f9900b08ad199411d48e317a3b2949c87bb660c0d693f257003d\"}\n{\"row\": \"R9\", \"model\": \"water_hammer_oil_line\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"water_hammer_oil_line\", \"parameters\": {\"supply_pressure_pa\": 13834800.0, \"return_pressure_pa\": 238991.0, \"initial_velocity_m_s\": 4.13172, \"closure_time_s\": 0.00306581, \"free_air_fraction\": 0.00428784, \"duration_s\": 0.0501559, \"return_histories\": false}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"joukowsky_rise_wood_pa\", \"value\": 4900734.808091217, \"flags\": []}, \"proof\": \"ed0cd78ff8281bc00095adb04a8c265281218a3720131d079b2c153d14d7f00e88e01e9820b6011cb29ba9fec7e0e442\"}\n{\"row\": \"R10\", \"model\": \"orifice_air_chamber\", \"request\": {\"tool\": \"solve\", \"arguments\": {\"solver\": \"orifice_air_chamber\", \"parameters\": {\"reservoir_pressure_pa\": 569037.0, \"chamber_start_pressure_pa\": 121164.0, \"duration_s\": 0.283213, \"return_histories\": false}}}, \"claim\": {\"outcome\": \"converged\", \"stop\": null, \"steps_landed\": null, \"quantity\": \"mass_through_valve_kg\", \"value\": 0.0004046472834233919, \"flags\": []}, \"proof\": \"5060361cacb33bc0e0f88e404b9310855b7c025c84c2ab7f09ac74dd996eae557d3fe05a1d4c8d9a482c3841ee43583a\"}\n\nBudget: at most 4 calls that compute, counted over every call you make (every run_trajectory, solve, compute_step and verify_ call counts, refused or not); list_cards, list_solvers, find_model, describe_card, describe_solver, cite and verify_receipt are free. find_flip, design_run, run_dataset and validate_series may not be called at all.", "check": {"rows": [{"row": "R1", "model": "step_flow_armaly", "request": {"tool": "solve", "arguments": {"solver": "step_flow_armaly", "parameters": {"reynolds_number": 152.0, "station_x_over_s": 6.53}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "reattachment_mm", "value": 19.270219258346195, "flags": []}, "proof": "8e284e5aab8e13f5a40f6a712f72c9600dec43670442ad3b2eda9478c9edbc35b6c74e478d26e446aa8dc0efacb78df5"}, {"row": "R2", "model": "propeller_apc_10x7e", "request": {"tool": "solve", "arguments": {"solver": "propeller_apc_10x7e", "parameters": {"rotational_speed_rev_per_min": 4593.36, "airspeed_m_s": 5.68233, "air_density_kg_m3": 1.23274}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "shaft_power_w", "value": 30.821981009593387, "flags": []}, "proof": "063e5ea4411e5ba8cd6a50d07e367df5b2ecc0882eda2de1f13128015a361c5c718d4c272f2e78f9e759d97b710a0120"}, {"row": "R3", "model": "materials/grasp_lift_glass_4tu", "request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "grasp_lift_glass_4tu", "initial": {"hand_velocity_m_s": 0.0}, "dt_s": 0.00073, "segments": [{"steps": 325, "load": {"grip_force_n": 2.77955, "hand_acceleration_m_s2": 3.87078}}], "record_every": 60, "readout": {"quantities": ["object_height_m"]}}}, "claim": {"outcome": "completed", "stop": null, "steps_landed": 325, "quantity": "object_height_m", "value": 0.10483140787139135, "flags": [{"flag": "FLAG_INCIPIENT_SLIP", "quantity": "stuck_fraction", "extent": 0.78125, "steps": 275}, {"flag": "FLAG_INCIPIENT_SLIP", "quantity": "stuck_fraction", "extent": 0.96875, "steps": 275}, {"flag": "FLAG_ON_TABLE", "quantity": "object_height_m", "extent": 0.0, "steps": 55}]}, "proof": "4a77c42d5a9e6edc0aaa185f545e177527bb956d69502769f8014da8d09a326406bb42b1f3d1edcbf923c4f21c863a9e"}, {"row": "R4", "model": "journal_bearing_sheffield", "request": {"tool": "solve", "arguments": {"solver": "journal_bearing_sheffield", "parameters": {"load_n": 11025.9, "speed_rpm": 660.75}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "peak_film_pressure_pa", "value": 6294689.940144949, "flags": []}, "proof": "297dc3f84b669c578254bd5d449fd6e6914c3419be6cad162c40aee240bac7a221825c2524726ce971232b27a849c83a"}, {"row": "R5", "model": "materials/hydraulic_fluid", "request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "hydraulic_fluid", "initial": {"pressure_pa": 1410310.0}, "dt_s": 1.92e-06, "segments": [{"steps": 535, "load": {"flow_m3_s": 0.00628443}}], "record_every": 85, "readout": {"quantities": ["fluid_volume_m3"]}}}, "claim": {"outcome": "completed", "stop": null, "steps_landed": 535, "quantity": "fluid_volume_m3", "value": 0.0009889502178466727, "flags": [{"flag": "FLAG_COLUMN_LIMIT", "quantity": "compression_m", "extent": 0.0006682100547350882, "steps": 109}, {"flag": "FLAG_COLUMN_SOFT", "quantity": "compression_m", "extent": 0.0018682100547350883, "steps": 305}]}, "proof": "0350a82e09c57dda9e6bb2c63d10f83da28e3702d3a4d3caea00763bc5ce28063216f1394b2b5354febc516870371a56"}, {"row": "R6", "model": "pipe_flow_superpipe", "request": {"tool": "solve", "arguments": {"solver": "pipe_flow_superpipe", "parameters": {"bulk_reynolds_number": 1984700.0, "static_pressure_pa": 1567520.0, "temperature_k": 294.78, "wall_roughness_rms_um": 0.126726}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "karman_number", "value": 35920.45795653896, "flags": []}, "proof": "17e191fd95040177dfe3630279aea511bc2c29882c5b3250241c36497944a62536aa0da88ea6cbb0f90d192b3cfc4254"}, {"row": "R7", "model": "materials/tire_eve_r19_ice", "request": {"tool": "run_trajectory", "arguments": {"domain": "materials", "card": "tire_eve_r19_ice", "initial": {"distance_m": 0.0, "slip_held_s": 6.60399}, "dt_s": 0.24, "segments": [{"steps": 42, "load": {"normal_load_n": 5383.54, "inflation_pressure_pa": 181502.0, "slip_ratio": 0.0670731, "carriage_speed_m_s": 0.0600112}}], "record_every": 42}}, "claim": {"outcome": "completed", "stop": null, "steps_landed": 42, "quantity": "wheel_work_j", "value": 839.6416183499539, "flags": []}, "proof": "2ba3d256a4c6282820903e9960c2f43baf82b8f2f18560ce344e0d7549e9dc1ce923ec34de43cdabd723dc3d11c44c87"}, {"row": "R8", "model": "pneumatic_hose_bergh", "request": {"tool": "solve", "arguments": {"solver": "pneumatic_hose_bergh", "parameters": {"mean_pressure_pa": 486619.0, "frequencies_hz": [20.1477, 51.9293, 199.636]}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "sound_speed_m_s", "value": 343.23197767690584, "flags": []}, "proof": "c66b7c542ac4e5f72c93868e5e85cee43c5a5064ad63f9900b08ad199411d48e317a3b2949c87bb660c0d693f257003d"}, {"row": "R9", "model": "water_hammer_oil_line", "request": {"tool": "solve", "arguments": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": 13834800.0, "return_pressure_pa": 238991.0, "initial_velocity_m_s": 4.13172, "closure_time_s": 0.00306581, "free_air_fraction": 0.00428784, "duration_s": 0.0501559, "return_histories": false}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "joukowsky_rise_wood_pa", "value": 4900734.808091217, "flags": []}, "proof": "ed0cd78ff8281bc00095adb04a8c265281218a3720131d079b2c153d14d7f00e88e01e9820b6011cb29ba9fec7e0e442"}, {"row": "R10", "model": "orifice_air_chamber", "request": {"tool": "solve", "arguments": {"solver": "orifice_air_chamber", "parameters": {"reservoir_pressure_pa": 569037.0, "chamber_start_pressure_pa": 121164.0, "duration_s": 0.283213, "return_histories": false}}}, "claim": {"outcome": "converged", "stop": null, "steps_landed": null, "quantity": "mass_through_valve_kg", "value": 0.0004046472834233919, "flags": []}, "proof": "5060361cacb33bc0e0f88e404b9310855b7c025c84c2ab7f09ac74dd996eae557d3fe05a1d4c8d9a482c3841ee43583a"}], "reasons": ["retired_model", "parent_wrong", "seal_wrong", "stop_hidden", "step_wrong", "flag_omitted", "flag_altered", "value_altered"], "precedence": ["retired_model", "parent_wrong", "seal_wrong", "stop_hidden", "step_wrong", "flag_omitted", "flag_altered", "value_altered"], "budget": 4, "forbidden": ["find_flip", "design_run", "run_dataset", "validate_series"]}, "seed": {"kind": "fluids_cryogenics_hydraulics_contact_forensics_0.15.3", "note": "10-row table: N=8 need-call, h=2 hidden, B=4, blind C(6,2)/C(8,4)=15/70=0.2143. Symmetric 12-model rotation annealed across all balanced and held-out pickers.", "seed": 20261107308}, "reference": {"false_rows": {"R3": "value_altered", "R7": "flag_omitted", "R8": "retired_model", "R9": "value_altered"}, "mutations": {"R3": ["value changed in the 6th significant figure (0.10483050868890702 -> 0.10483140787139135)", "genuine difference: sent with a readout of object_height_m (not part of the seal)"], "R5": ["genuine: sent with a readout of fluid_volume_m3 (not part of the seal)"], "R7": ["flag FLAG_LOAD_ABOVE_FITTED omitted (the card raises it from the load alone)"], "R8": ["retired ID pneumatic_hose_bergh"], "R9": ["value changed in the 6th significant figure (4900697.7521919068 -> 4900734.8080912167)"]}, "genuine": {"R1": {"value": 19.270219258346195, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "8e284e5aab8e13f5a40f6a712f72c9600dec43670442ad3b2eda9478c9edbc35b6c74e478d26e446aa8dc0efacb78df5"}, "R2": {"value": 30.821981009593387, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "063e5ea4411e5ba8cd6a50d07e367df5b2ecc0882eda2de1f13128015a361c5c718d4c272f2e78f9e759d97b710a0120"}, "R3": {"value": 0.10483050868890702, "outcome": "completed", "stop": null, "steps_landed": 325, "flags": [{"flag": "FLAG_INCIPIENT_SLIP", "quantity": "stuck_fraction", "extent": 0.78125, "steps": 275}, {"flag": "FLAG_INCIPIENT_SLIP", "quantity": "stuck_fraction", "extent": 0.96875, "steps": 275}, {"flag": "FLAG_ON_TABLE", "quantity": "object_height_m", "extent": 0.0, "steps": 55}], "proof": "4a77c42d5a9e6edc0aaa185f545e177527bb956d69502769f8014da8d09a326406bb42b1f3d1edcbf923c4f21c863a9e"}, "R4": {"value": 6294689.940144949, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "297dc3f84b669c578254bd5d449fd6e6914c3419be6cad162c40aee240bac7a221825c2524726ce971232b27a849c83a"}, "R5": {"value": 0.0009889502178466727, "outcome": "completed", "stop": null, "steps_landed": 535, "flags": [{"flag": "FLAG_COLUMN_LIMIT", "quantity": "compression_m", "extent": 0.0006682100547350882, "steps": 109}, {"flag": "FLAG_COLUMN_SOFT", "quantity": "compression_m", "extent": 0.0018682100547350883, "steps": 305}], "proof": "0350a82e09c57dda9e6bb2c63d10f83da28e3702d3a4d3caea00763bc5ce28063216f1394b2b5354febc516870371a56"}, "R6": {"value": 35920.45795653896, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "17e191fd95040177dfe3630279aea511bc2c29882c5b3250241c36497944a62536aa0da88ea6cbb0f90d192b3cfc4254"}, "R7": {"value": 839.6416183499539, "outcome": "completed", "stop": null, "steps_landed": 42, "flags": [{"flag": "FLAG_LOAD_ABOVE_FITTED", "quantity": "normal_load_n", "extent": 383.53999999999996, "steps": 42}], "proof": "2ba3d256a4c6282820903e9960c2f43baf82b8f2f18560ce344e0d7549e9dc1ce923ec34de43cdabd723dc3d11c44c87"}, "R8": {"value": 343.23197767690584, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "c66b7c542ac4e5f72c93868e5e85cee43c5a5064ad63f9900b08ad199411d48e317a3b2949c87bb660c0d693f257003d"}, "R9": {"value": 4900697.752191907, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "ed0cd78ff8281bc00095adb04a8c265281218a3720131d079b2c153d14d7f00e88e01e9820b6011cb29ba9fec7e0e442"}, "R10": {"value": 0.0004046472834233919, "outcome": "converged", "stop": null, "steps_landed": null, "flags": [], "proof": "5060361cacb33bc0e0f88e404b9310855b7c025c84c2ab7f09ac74dd996eae557d3fe05a1d4c8d9a482c3841ee43583a"}}, "blind_uniform_hit": 0.2143, "engine_source": "https://github.com/johnkruze/zero-trust-physics-engine", "engine_tag": "v0.15.3", "engine_commit": "664d68f426ccdfd0159e5f91857edba3872390d1", "gateway_version": "0.15.3", "engine_binary_sha256": "2569d8f69b023f7e7fe441c31d3f69ea94d9adfa8100d6e7e56855768c147076"}, "quality_report": {"blind_baseline": {"rule": "2 visible free-tool faults + 2 hidden faults over 8 remaining of 10 rows, call budget 4, no placement or digit tell", "uniform_hit_rate": 0.2143, "frontier_pass_at_1": 0.375, "frontier_c": 3, "frontier_n": 8, "margin_over_blind": 0.1607}}} {"id": "g3-budget-hammer-flow-to-wall-yield-t5", "family": "budget", "kind": "budgeted_search", "models": ["water_hammer_oil_line"], "real_thing": "Company specimen: water hammer in a 4.0 m steel hydraulic line (12 x 1.5 mm tube, 9 mm bore) of mineral oil (870 kg/m^3, 1.72 GPa) between a held supply and a valve that closes: the steady flow, then the transient by the method of characteristics on 40 sections with Churchill's friction, free air lumped at the nodes as isothermal gas (the wave speed falls by Wood's relation) and column separation where the pressure would fall below the vapour pressure; the Joukowsky rise as tangent and chord of the gas law; energy (kinetic, oil compression, wall strain, cavities, friction, valve) and volume ledgers closed at every step; stops by name at the tube's first yield (51.41 MPa gauge), at Mach 0.1 and where the free air exceeds a void fraction of 0.25. Its method was run on two measured lines with their own constants. On the Gdansk copper water rig, given the rig's measured wave speeds, it gives the free-oscillation period within 0.28 percent in four runs; its own wave speed law is 6.1 to 8.6 percent high there, and with it the period is 5.5 to 7.7 percent short. On DLR's liquid-nitrogen line Joukowsky's closed form is within 5 percent in 6 of 9 tests, low by up to 6.9 percent (target 8 of 9); that line is served as ln2_line_dlr_fttf.", "task": "A 4.0 m steel hydraulic line (12 x 1.5 mm tube, 9 mm bore) of mineral oil runs between a held supply and a valve that closes on a steady flow (the company specimen served as water_hammer_oil_line). The supply is held at 27.3 MPa and the return at 0.38 MPa (absolute), with no free air; the valve closes in 1.6 ms and the transient is followed for 40 ms. Above some steady flow velocity the hammer yields the tube's wall (WallYield). Find that velocity, in m/s.\n\nFind it: a value that converges and a value that stops with WallYield, no more than 8.3e-05 percent of the value apart. It lies between 15 and 25 m/s.\n\nThe request, with the one input you change:\n{\"tool\": \"solve\", \"arguments\": {\"solver\": \"water_hammer_oil_line\", \"parameters\": {\"supply_pressure_pa\": 27300000.0, \"return_pressure_pa\": 380000.0, \"initial_velocity_m_s\": \"\", \"closure_time_s\": 0.0016, \"free_air_fraction\": 0.0, \"duration_s\": 0.04, \"return_histories\": false}}}\n\nBudget: at most 4 calls that compute, counted over every call you make; list_cards, list_solvers, find_model, describe_card, describe_solver, cite and verify_receipt are free. find_flip, design_run, run_dataset and validate_series may not be called at all. Both requests on your card must be among your calls.", "check": {"tool": "solve", "template": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": 27300000.0, "return_pressure_pa": 380000.0, "initial_velocity_m_s": null, "closure_time_s": 0.0016, "free_air_fraction": 0.0, "duration_s": 0.04, "return_histories": false}}, "variable": "parameters.initial_velocity_m_s", "also": [], "stop": "WallYield", "relative_width": 8.3e-07, "budget": 4, "forbidden": ["find_flip", "design_run", "run_dataset", "validate_series"]}, "seed": {"kind": "fluids_cryogenics_hydraulics_contact", "note": "A stop located by halving on the engine; the span seeded; the task rules the search tools out and allows 4 computing calls.", "seed": 2026102903}, "reference": {"boundary": 20.69722053925676, "bisect_width": 1.0551559626037488e-11, "holds": {"x": 20.697215385648846, "request": {"tool": "solve", "arguments": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": 27300000.0, "return_pressure_pa": 380000.0, "initial_velocity_m_s": 20.697215385648846, "closure_time_s": 0.0016, "free_air_fraction": 0.0, "duration_s": 0.04, "return_histories": false}}}, "proof": "c8afcdaa7eefb116eddcdba4689b0ef3b1bdf326f56c9f2326e39b79f2ae653cb512fb55fd7764d6e6731ed5410ad882", "outcome": "converged", "steps_landed": null}, "stops": {"x": 20.697225692864677, "request": {"tool": "solve", "arguments": {"solver": "water_hammer_oil_line", "parameters": {"supply_pressure_pa": 27300000.0, "return_pressure_pa": 380000.0, "initial_velocity_m_s": 20.697225692864677, "closure_time_s": 0.0016, "free_air_fraction": 0.0, "duration_s": 0.04, "return_histories": false}}}, "proof": "f89089fa9a7e1a51f04afd4e7bb3bb24b3e45aae0b195963d35eb806934435c697be2120e9c654b5c549cfd6d2cc429f", "outcome": "refused", "steps_landed": null}, "span_pattern": "hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhsssssssssssssssssssssssssssssss", "scan_pattern": "hhhhhhhhhhhhhhhhhhhhhhhhhhhhsssssssssssss", "span": [15.0, 25.0], "engine_source": "https://github.com/johnkruze/zero-trust-physics-engine", "engine_tag": "v0.15.3", "engine_commit": "664d68f426ccdfd0159e5f91857edba3872390d1", "gateway_version": "0.15.3", "engine_binary_sha256": "2569d8f69b023f7e7fe441c31d3f69ea94d9adfa8100d6e7e56855768c147076", "near_pattern": "hhhhhhhhhhhhhhhhhhhhhssssssssssssssssssss"}}