Daily Papers

Small instruct-tuned LLMs produce degenerate verbal confidence under minimal elicitation: ceiling rates above 95%, near-chance Type-2 AUROC, and Invalid validity profiles. We test whether confidence-conditioned supervised fine-tuning (CSFT) with self-consistency-derived targets can close the gap between internal information and verbal readout. A pre-registered Phase 0 protocol on Gemma 3 4B-it with a modal filter restricting training to items with correct modal answers produced a negative result: AUROC2 dropped from 0.554 to 0.509 due to label-entropy collapse in the training targets. An exploratory rescue removed the filter, training on all 2,000 calibration items. This produced a binary verbal correctness discriminator with AUROC2 = 0.774 on held-out TriviaQA, compressing a 10-sample self-consistency signal (AUROC2 = 0.999) into a single-pass readout exceeding logit entropy (0.701). The shuffled-target control showed no improvement (0.501). On MMLU, accuracy improved from 54.2% to 77.4% with the shuffled model at baseline (56.1%), supporting a target-dependent interpretation. The result is exploratory, binary rather than continuously calibrated, and observed at a single scale. It identifies two design lessons: confidence training requires label entropy, and correct targets regularise output format.

Open-source large language models (LLMs) still marginalise Moroccan Arabic (Darija), forcing practitioners either to bolt on heavyweight Arabic adapters or to sacrifice the very reasoning skills that make LLMs useful. We show that a rigorously quality-over-quantity alignment strategy can surface fluent Darija while safeguarding the backbone s cross-lingual reasoning at a sliver of the usual compute. We translate three compact instruction suites LIMA 1 K, DEITA 6 K and TULU 50 K into Darija, preserve 20 of the English originals, and add mathematics, coding and scientific prompts. A LoRA-tuned Gemma 3-4B trained on 5 K mixed instructions lifts DarijaMMLU from 32.8 to 42.7 ; adding the reasoning-dense TULU portion pushes it to 47.5 with no English regression. Scaling the identical recipe to Gemma 3-27B produces GemMaroc-27B, which matches Atlas-Chat on DarijaMMLU (61.6 ) and leaps ahead on Darija commonsense, scoring 60.5 on HellaSwag versus Atlas-Chat s 48.4 . Crucially, GemMaroc retains Gemma-27B s strong maths and general-reasoning ability, showing only minimal movement on GSM8K and English benchmarks. The entire model is trained in just 48 GPU.h, underscoring a Green AI pathway to inclusive, sustainable language technology. We release code, data and checkpoints to spur Darija-centric applications in education, public services and everyday digital interaction.

Accurate and timely identification of construction hazards around workers is essential for preventing workplace accidents. While large vision-language models (VLMs) demonstrate strong contextual reasoning capabilities, their high computational requirements limit their applicability in near real-time construction hazard detection. In contrast, small vision-language models (sVLMs) with fewer than 4 billion parameters offer improved efficiency but often suffer from reduced accuracy and hallucination when analyzing complex construction scenes. To address this trade-off, this study proposes a detection-guided sVLM framework that integrates object detection with multimodal reasoning for contextual hazard identification. The framework first employs a YOLOv11n detector to localize workers and construction machinery within the scene. The detected entities are then embedded into structured prompts to guide the reasoning process of sVLMs, enabling spatially grounded hazard assessment. Within this framework, six sVLMs (Gemma-3 4B, Qwen-3-VL 2B/4B, InternVL-3 1B/2B, and SmolVLM-2B) were evaluated in zero-shot settings on a curated dataset of construction site images with hazard annotations and explanatory rationales. The proposed approach consistently improved hazard detection performance across all models. The best-performing model, Gemma-3 4B, achieved an F1-score of 50.6%, compared to 34.5% in the baseline configuration. Explanation quality also improved significantly, with BERTScore F1 increasing from 0.61 to 0.82. Despite incorporating object detection, the framework introduces minimal overhead, adding only 2.5 ms per image during inference. These results demonstrate that integrating lightweight object detection with small VLM reasoning provides an effective and efficient solution for context-aware construction safety hazard detection.

Where do learning signals come from when there is no ground truth in post-training? We propose turning exploration into supervision through Compute as Teacher (CaT), which converts the model's own exploration at inference-time into reference-free supervision by synthesizing a single reference from a group of parallel rollouts and then optimizing toward it. Concretely, the current policy produces a group of rollouts; a frozen anchor (the initial policy) reconciles omissions and contradictions to estimate a reference, turning extra inference-time compute into a teacher signal. We turn this into rewards in two regimes: (i) verifiable tasks use programmatic equivalence on final answers; (ii) non-verifiable tasks use self-proposed rubrics-binary, auditable criteria scored by an independent LLM judge, with reward given by the fraction satisfied. Unlike selection methods (best-of-N, majority, perplexity, or judge scores), synthesis may disagree with the majority and be correct even when all rollouts are wrong; performance scales with the number of rollouts. As a test-time procedure, CaT improves Gemma 3 4B, Qwen 3 4B, and Llama 3.1 8B (up to +27% on MATH-500; +12% on HealthBench). With reinforcement learning (CaT-RL), we obtain further gains (up to +33% and +30%), with the trained policy surpassing the initial teacher signal.

Artificial intelligence (AI) has significant potential in healthcare applications, but its training and deployment faces challenges due to healthcare's diverse data, complex tasks, and the need to preserve privacy. Foundation models that perform well on medical tasks and require less task-specific tuning data are critical to accelerate the development of healthcare AI applications. We introduce MedGemma, a collection of medical vision-language foundation models based on Gemma 3 4B and 27B. MedGemma demonstrates advanced medical understanding and reasoning on images and text, significantly exceeding the performance of similar-sized generative models and approaching the performance of task-specific models, while maintaining the general capabilities of the Gemma 3 base models. For out-of-distribution tasks, MedGemma achieves 2.6-10% improvement on medical multimodal question answering, 15.5-18.1% improvement on chest X-ray finding classification, and 10.8% improvement on agentic evaluations compared to the base models. Fine-tuning MedGemma further improves performance in subdomains, reducing errors in electronic health record information retrieval by 50% and reaching comparable performance to existing specialized state-of-the-art methods for pneumothorax classification and histopathology patch classification. We additionally introduce MedSigLIP, a medically-tuned vision encoder derived from SigLIP. MedSigLIP powers the visual understanding capabilities of MedGemma and as an encoder achieves comparable or better performance than specialized medical image encoders. Taken together, the MedGemma collection provides a strong foundation of medical image and text capabilities, with potential to significantly accelerate medical research and development of downstream applications. The MedGemma collection, including tutorials and model weights, can be found at https://goo.gle/medgemma.

Large language models (LLMs) show strong multilingual capabilities, yet reliably controlling the language of their outputs remains difficult. Representation-level steering addresses this by adding language-specific vectors to model activations at inference time, but identifying language-specific directions in the residual stream often relies on multilingual or parallel data that can be expensive to obtain. Sparse autoencoders (SAEs) decompose residual activations into interpretable, sparse feature directions and offer a natural basis for this search, yet existing SAE-based approaches face the same data constraint. We introduce LangFIR (Language Feature Identification via Random-token Filtering), a method that discovers language-specific SAE features using only a small amount of monolingual data and random-token sequences. Many SAE features consistently activated by target-language inputs do not encode language identity. Random-token sequences surface these language-agnostic features, allowing LangFIR to filter them out and isolate a sparse set of language-specific features. We show that these features are extremely sparse, highly selective for their target language, and causally important: directional ablation increases cross-entropy loss only for the corresponding language. Using these features to construct steering vectors for multilingual generation control, LangFIR achieves the best average accuracy BLEU across three models (Gemma 3 1B, Gemma 3 4B, and Llama 3.1 8B), three datasets, and twelve target languages, outperforming the strongest monolingual baseline by up to and surpassing methods that rely on parallel data. Our results suggest that language identity in multilingual LLMs is localized in a sparse set of feature directions discoverable with monolingual data. Code is available at https://anonymous.4open.science/r/LangFIR-C0F5/.

The key-value (KV) cache is widely treated as essential state in transformer inference, and a large body of work engineers policies to compress, evict, or approximate its entries. We prove that this state is entirely redundant: keys and values at every layer are deterministic projections of the residual stream, and recomputing them from a single residual vector per token incurs exactly zero reconstruction error, not approximately, but bit-identically. We verify this across six models from four architecture families (135M to 4B parameters). Cross-task residual patching at every layer produces D_KL = 0 between patched and original output distributions, confirming that the residual stream satisfies a Markov property and is the sole information-carrying state. Removing the cache entirely and recomputing from scratch yields token-identical output under greedy decoding on all models tested. We build on this result with KV-Direct, a bounded-memory inference scheme that checkpoints residual vectors (5 KB per token on Gemma 3-4B) instead of full KV pairs (136 KB), recomputing keys and values on demand. Over 20 conversation turns, KV-Direct holds peak memory at 42 MB while the standard cache grows past 103 MB. Against five eviction baselines (H2O, StreamingLLM, SnapKV, TOVA, window-only), KV-Direct maintains 100% token match at every cache budget; all baselines degrade to 5-28%. A per-operation latency analysis shows recomputation runs up to 5x faster than reading cached tensors at moderate batch sizes. Code is available at https://github.com/Kaleemullahqasim/KV-Direct.

AI agents have become surprisingly proficient at software engineering over the past year, largely due to improvements in reasoning capabilities. This raises a deeper question: can these systems extend their capabilities to automate AI research itself? In this paper, we explore post-training, the critical phase that turns base LLMs into useful assistants. We introduce PostTrainBench to benchmark how well LLM agents can perform post-training autonomously under bounded compute constraints (10 hours on one H100 GPU). We ask frontier agents (e.g., Claude Code with Opus 4.6) to optimize the performance of a base LLM on a particular benchmark (e.g., Qwen3-4B on AIME). Importantly, we do not provide any predefined strategies to the agents and instead give them full autonomy to find necessary information on the web, run experiments, and curate data. We find that frontier agents make substantial progress but generally lag behind instruction-tuned LLMs from leading providers: 23.2% for the best agent vs. 51.1% for official instruction-tuned models. However, agents can exceed instruction-tuned models in targeted scenarios: GPT-5.1 Codex Max achieves 89% on BFCL with Gemma-3-4B vs. 67% for the official model. We also observe several failure modes worth flagging. Agents sometimes engage in reward hacking: training on the test set, downloading existing instruction-tuned checkpoints instead of training their own, and using API keys they find to generate synthetic data without authorization. These behaviors are concerning and highlight the importance of careful sandboxing as these systems become more capable. Overall, we hope PostTrainBench will be useful for tracking progress in AI R&D automation and for studying the risks that come with it. Website and code are available at https://posttrainbench.com/.

Context. LLM-based autonomous agents in software engineering rely on large, proprietary models, limiting local deployment. This has spurred interest in Small Language Models (SLMs), but their practical effectiveness and efficiency within complex agentic frameworks for automated issue resolution remain poorly understood. Goal. We investigate the performance, energy efficiency, and resource consumption of four leading agentic issue resolution frameworks when deliberately constrained to using SLMs. We aim to assess the viability of these systems for this task in resource-limited settings and characterize the resulting trade-offs. Method. We conduct a controlled evaluation of four leading agentic frameworks (SWE-Agent, OpenHands, Mini SWE Agent, AutoCodeRover) using two SLMs (Gemma-3 4B, Qwen-3 1.7B) on the SWE-bench Verified Mini benchmark. On fixed hardware, we measure energy, duration, token usage, and memory over 150 runs per configuration. Results. We find that framework architecture is the primary driver of energy consumption. The most energy-intensive framework, AutoCodeRover (Gemma), consumed 9.4x more energy on average than the least energy-intensive, OpenHands (Gemma). However, this energy is largely wasted. Task resolution rates were near-zero, demonstrating that current frameworks, when paired with SLMs, consume significant energy on unproductive reasoning loops. The SLM's limited reasoning was the bottleneck for success, but the framework's design was the bottleneck for efficiency. Conclusions. Current agentic frameworks, designed for powerful LLMs, fail to operate efficiently with SLMs. We find that framework architecture is the primary driver of energy consumption, but this energy is largely wasted due to the SLMs' limited reasoning. Viable low-energy solutions require shifting from passive orchestration to architectures that actively manage SLM weaknesses.

Robots operating in shared human environments must not only navigate, interact, and detect their surroundings, they must also interpret and respond to dynamic, and often unpredictable, human behaviours. Although recent advances have shown promise in enhancing robotic perception and instruction-following using Vision-Language Models (VLMs), they remain limited in addressing the complexities of multimodal human-robot interactions (HRI). Motivated by this challenge, we introduce a lightweight language-to-vision feedback module that closes the loop between an LLM and the vision encoder in VLMs. The module projects image-token hidden states through a gated Multi-Layer Perceptron (MLP) back into the encoder input, prompting a second pass that reinterprets the scene under text context. We evaluate this approach on three robotics-centred tasks: navigation in a simulated environment (Habitat), sequential scene description (Mementos-Robotics), and human-intention recognition (our HRI dataset). Results show that our method improves Qwen 2.5 (7B) by 3.3% (less distance), +0.057 description score, and +2.93% accuracy, with less than 3% extra parameters; Gemma 3 (4B) and LLaVA OV 1.5 (4B) show mixed navigation results but gains +0.111,+0.055 and +10.81%,+4.79% on the latter two tasks. Code is available at https://github.com/alessioGalatolo/VLM-Reasoning-for-Robotics

We introduce a new generation of small reasoning models for RAG, search, and source summarization. Pleias-RAG-350m and Pleias-RAG-1B are mid-trained on a large synthetic dataset emulating the retrieval of a wide variety of multilingual open sources from the Common Corpus. They provide native support for citation and grounding with literal quotes and reintegrate multiple features associated with RAG workflows, such as query routing, query reformulation, and source reranking. Pleias-RAG-350m and Pleias-RAG-1B outperform SLMs below 4 billion parameters on standardized RAG benchmarks (HotPotQA, 2wiki) and are competitive with popular larger models, including Qwen-2.5-7B, Llama-3.1-8B, and Gemma-3-4B. They are the only SLMs to date maintaining consistent RAG performance across leading European languages and ensuring systematic reference grounding for statements. Due to their size and ease of deployment on constrained infrastructure and higher factuality by design, the models unlock a range of new use cases for generative AI.

Chain-of-thought (CoT) reasoning and its variants have substantially improved the performance of language models on complex reasoning tasks, yet the precise mechanisms by which different strategies facilitate generalization remain poorly understood. While current explanations often point to increased test-time computation or structural guidance, establishing a consistent, quantifiable link between these factors and generalization remains challenging. In this work, we identify intrinsic dimensionality as a quantitative measure for characterizing the effectiveness of reasoning chains. Intrinsic dimensionality quantifies the minimum number of model dimensions needed to reach a given accuracy threshold on a given task. By keeping the model architecture fixed and varying the task formulation through different reasoning strategies, we demonstrate that effective reasoning strategies consistently reduce the intrinsic dimensionality of the task. Validating this on GSM8K with Gemma-3 1B and 4B, we observe a strong inverse correlation between the intrinsic dimensionality of a reasoning strategy and its generalization performance on both in-distribution and out-of-distribution data. Our findings suggest that effective reasoning chains facilitate learning by better compressing the task using fewer parameters, offering a new quantitative metric for analyzing reasoning processes.

We introduce Gemma 3, a multimodal addition to the Gemma family of lightweight open models, ranging in scale from 1 to 27 billion parameters. This version introduces vision understanding abilities, a wider coverage of languages and longer context - at least 128K tokens. We also change the architecture of the model to reduce the KV-cache memory that tends to explode with long context. This is achieved by increasing the ratio of local to global attention layers, and keeping the span on local attention short. The Gemma 3 models are trained with distillation and achieve superior performance to Gemma 2 for both pre-trained and instruction finetuned versions. In particular, our novel post-training recipe significantly improves the math, chat, instruction-following and multilingual abilities, making Gemma3-4B-IT competitive with Gemma2-27B-IT and Gemma3-27B-IT comparable to Gemini-1.5-Pro across benchmarks. We release all our models to the community.

Large language models (LLMs) demonstrate strong performance, but they often lack transparency. We introduce GeoLAN, a training framework that treats token representations as geometric trajectories and applies stickiness conditions inspired by recent developments related to the Kakeya Conjecture. We have developed two differentiable regularizers, Katz-Tao Convex Wolff (KT-CW) and Katz-Tao Attention (KT-Attn), that promote isotropy and encourage diverse attention. Our experiments with Gemma-3 (1B, 4B, 12B) and Llama-3-8B show that GeoLAN frequently maintains task accuracy while improving geometric metrics and reducing certain fairness biases. These benefits are most significant in mid-sized models. Our findings reveal scale-dependent trade-offs between geometric precision and performance, suggesting that geometry-aware training is a promising approach to enhance mechanistic interpretability.

Recent frontier models employ long chain-of-thought reasoning to explore solution spaces in context and achieve stonger performance. While many works study distillation to build smaller yet capable models, most focus on English and little is known about language-specific reasoning. To bridge this gap, we first introduct **Language-Mixed CoT**, a reasoning schema that switches between English and a target language, using English as an anchor to excel in reasoning while minimizing translation artificats. As a Korean case study, we curate **Yi-Sang**: 5.79M native-Korean prompts from web Q&A, exams, STEM, and code; 3.7M long reasoning traces generated from Qwen3-32B; and a targeted 260k high-yield subset. We train ninve models (4B-35B) across six families (Qwen2.5, Llama-3.1, Gemma-3, etc). Our best model, **KO-REAson-35B**, achieves state-of-the-art performance, with the highest overall average score (64.0 \pm 25), ranking first on 5/9 benchmarks and second on the remainder. Samller and mid-sized models also benefit substantially, with an average improvement of +18.6 points across teh evaluated nine benchmarks. Ablations show **Language-Mixed CoT** is more effective than monolingual CoT, also resulting in cross-lingual and mult-modal performance gains. We release our data-curation pipeline, evaluation system, datasets, and models to advance research on language-specific reasoning. Data and model collection: https://huggingface.co/KOREAson.

We report on the first large-scale mixture-of-experts (MoE) pretraining study on pure AMD hardware, utilizing both MI300X GPUs with Pollara interconnect. We distill practical guidance for both systems and model design. On the systems side, we deliver a comprehensive cluster and networking characterization: microbenchmarks for all core collectives (all-reduce, reduce-scatter, all-gather, broadcast) across message sizes and GPU counts on Pollara. To our knowledge, this is the first at this scale. We further provide MI300X microbenchmarks on kernel sizing and memory bandwidth to inform model design. On the modeling side, we introduce and apply MI300X-aware transformer sizing rules for attention and MLP blocks and justify MoE widths that jointly optimize training throughput and inference latency. We describe our training stack in depth, including often-ignored utilities such as fault-tolerance and checkpoint-reshaping, as well as detailed information on our training recipe. We also provide a preview of our model architecture and base model - ZAYA1 (760M active, 8.3B total parameters MoE) - which will be further improved upon in forthcoming papers. ZAYA1-base achieves performance comparable to leading base models such as Qwen3-4B and Gemma3-12B at its scale and larger, and outperforms models including Llama-3-8B and OLMoE across reasoning, mathematics, and coding benchmarks. Together, these results demonstrate that the AMD hardware, network, and software stack are mature and optimized enough for competitive large-scale pretraining.

Reinforcement learning with verifiable rewards has rapidly advanced reasoning in vision--language models. However, for chest X-ray report generation, the standard rewards (i.e. exact-match accuracy and step-level processes) are incompatible because the reports consist of unordered and orthogonal findings, rather than a causal reasoning chain. We address this gap with a set-based view: each report is split into sentences and embedded by a frozen sentence transformer, yielding unordered embedding sets. We propose the use of set-to-set distances between generated and reference embeddings as continuous, permutation-invariant rewards. Across two datasets and three vision--language models (Qwen3-VL-2B/4B, Gemma3-4B), post-training with set-to-set distance based rewards via GRPO consistently outperforms supervised fine-tuning and exact-match GRPO on all headline metrics (BERTScore, RadGraph F1 and CheXbert F1 by average \%6.80, \%7.82 and \%4.45 relative improvements respectively). The same set distances also enable test-time best-of-N selection: scoring candidates by their distance to training-report embeddings outperforms random selection on our trained models as well as three closed-source LLMs (Mistral-Small, Gemini-2.5 Flash-Lite, GPT-4o-mini) with on average \%16.4 relative improvement on BERTScore. Used as a streaming signal, they support a more efficient form of test-time scaling: pruning low-scoring candidates mid-generation reduces generated tokens by over 50\% while preserving the Findings quality of full best-of-N selection. Together these results establish set-distance rewards as a unified signal for both post-training and test-time scaling in chest X-ray report generation. Our code is publicly https://anonymous.4open.science/r/Set-Distance-Rewards-CXR-BFDA{available}.

Large language models have become central to many AI applications, but their growing energy consumption raises serious sustainability concerns. A key limitation in current AI deployments is the reliance on a one-size-fits-all inference strategy where most systems route every request to the same large model, regardless of task complexity, leading to substantial and unnecessary energy waste. To address this issue, we propose a context-aware model switching approach that dynamically selects an appropriate language model based on query complexity. The proposed system uses a Context-Aware Model Switching for Energy-Efficient LLM Inference that combines caching for repeated queries, rulebased complexity scoring for fast and explainable decisions, machine learning classification to capture semantic intent, and a user-adaptive component that learns from interaction patterns over time. The proposed architecture was evaluated using real conversation workloads and three open-source language models (Gemma3 1B, Gemma3 4B and Qwen3 4B) with different computational costs, measuring energy consumption (via NVML GPU power telemetry), response latency, routing accuracy, and output quality (BERTScore F1) to reflect real-world usage conditions. Experimental results show that the model switching approach can reduce energy consumption by up to 67.5% compared to always using the largest model while maintaining a response quality of 93.6%. In addition, the response time for simple queries also improved significantly by approximately 68%. These results show that model switching inference offers a practical and scalable path toward more energy-efficient and sustainable AI systems, demonstrating that significant efficiency gains can be achieved without major sacrifices in response quality.

This work introduces Gemma, a family of lightweight, state-of-the art open models built from the research and technology used to create Gemini models. Gemma models demonstrate strong performance across academic benchmarks for language understanding, reasoning, and safety. We release two sizes of models (2 billion and 7 billion parameters), and provide both pretrained and fine-tuned checkpoints. Gemma outperforms similarly sized open models on 11 out of 18 text-based tasks, and we present comprehensive evaluations of safety and responsibility aspects of the models, alongside a detailed description of model development. We believe the responsible release of LLMs is critical for improving the safety of frontier models, and for enabling the next wave of LLM innovations.

System logs are crucial for monitoring and diagnosing modern computing infrastructure, but their scale and complexity require reliable and efficient automated interpretation. Since severity levels are predefined metadata in system log messages, having a model merely classify them offers limited standalone practical value, revealing little about its underlying ability to interpret system logs. We argue that severity classification is more informative when treated as a benchmark for probing runtime log comprehension rather than as an end task. Using real-world journalctl data from Linux production servers, we evaluate nine small language models (SLMs) and small reasoning language models (SRLMs) under zero-shot, few-shot, and retrieval-augmented generation (RAG) prompting. The results reveal strong stratification. Qwen3-4B achieves the highest accuracy at 95.64% with RAG, while Gemma3-1B improves from 20.25% under few-shot prompting to 85.28% with RAG. Notably, the tiny Qwen3-0.6B reaches 88.12% accuracy despite weak performance without retrieval. In contrast, several SRLMs, including Qwen3-1.7B and DeepSeek-R1-Distill-Qwen-1.5B, degrade substantially when paired with RAG. Efficiency measurements further separate models: most Gemma and Llama variants complete inference in under 1.2 seconds per log, whereas Phi-4-Mini-Reasoning exceeds 228 seconds per log while achieving <10% accuracy. These findings suggest that (1) architectural design, (2) training objectives, and (3) the ability to integrate retrieved context under strict output constraints jointly determine performance. By emphasizing small, deployable models, this benchmark aligns with real-time requirements of digital twin (DT) systems and shows that severity classification serves as a lens for evaluating model competence and real-time deployability, with implications for root cause analysis (RCA) and broader DT integration.

Large Language Models (LLMs) have demonstrated remarkable capabilities in understanding and generating human-like content. This has revolutionized various sectors such as healthcare, software development, and education. In education, LLMs offer potential for personalized and interactive learning experiences, especially in regions with limited teaching resources. However, adapting these models effectively to curriculum-specific content, such as the National Council of Educational Research and Training (NCERT) syllabus in India, presents unique challenges in terms of accuracy, alignment, and pedagogical relevance. In this paper, we present the framework "PustakAI"Pustak means `book' in many Indian languages. for the design and evaluation of a novel question-answering dataset "NCERT-QA" aligned with the NCERT curriculum for English and Science subjects of grades 6 to 8. We classify the curated QA pairs as Factoid, Inferential, and Others (evaluative and reasoning). We evaluate the dataset with various prompting techniques, such as meta-prompt, few-shot, and CoT-style prompting, using diverse evaluation metrics to understand which approach aligns more efficiently with the structure and demands of the curriculum. Along with the usability of the dataset, we analyze the strengths and limitations of current open-source LLMs (Gemma3:1b, Llama3.2:3b, and Nemotron-mini:4b) and high-end LLMs (Llama-4-Scout-17B and Deepseek-r1-70B) as AI-based learning tools in formal education systems.

We train a suite of multimodal foundation models (MMFM) using the popular LLaVA framework with the recently released Gemma family of large language models (LLMs). Of particular interest is the 2B parameter Gemma model, which provides opportunities to construct capable small-scale MMFMs. In line with findings from other papers in this space, we test the effect of ablating three design features: pretraining the connector, utilizing a more powerful image backbone, and increasing the size of the language backbone. The resulting models, which we call LLaVA-Gemma, exhibit moderate performance on an array of evaluations, but fail to improve past the current comparably sized SOTA models. Closer analysis of performance shows mixed effects; skipping pretraining tends to reduce performance, larger vision models sometimes improve performance, and increasing language model size has inconsistent effects. We publicly release training recipes, code and weights for our models for the LLaVA-Gemma models.

We present our submission to the LLM track of the 2026 Computational Models of Reference, Anaphora and Coreference (CRAC 2026) shared task. With an average CoNLL F1 score of 74.32 on the official test set, our system ranked first in the LLM track, and third overall. Our system is based on the Gemma-3-27b model, fine-tuned using a two-stage strategy with a multilingual base adapter followed by dataset-specific adapters. We represent mention spans by their headword using an XML-inspired format with local reindexing and annotate documents iteratively. These design choices proved effective across languages, document lengths, and annotation guidelines.