Delete lib

lib/Dockerfile.wheels

@@ -1,190 +0,0 @@
-# An image for building manylinux1 wheels equivalent to those that
-# https://github.com/sgillies/frs-wheel-builds makes for macosx.
-#
-# TODO: Figure out how to make the builds for osx!
-#
-# Note well: a very limited set of format drivers are included in these
-# wheels. See the GDAL configuration below for details.
-
-FROM quay.io/pypa/manylinux1_x86_64
-
-RUN sed -i 's/enabled=1/enabled=0/' /etc/yum/pluginconf.d/fastestmirror.conf \
-    && sed -i 's/mirrorlist/#mirrorlist/' /etc/yum.repos.d/CentOS-Base.repo \
-    && sed -i 's|#baseurl=http://mirror.centos.org/centos/$releasever|baseurl=http://vault.centos.org/5.11|' /etc/yum.repos.d/CentOS-Base.repo
-
-RUN yum update -y && yum install -y curl-devel json-c-devel zlib-devel libtiff-devel postgresql-devel
-
-# Install openssl
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O https://www.openssl.org/source/openssl-1.0.2o.tar.gz \
-    && echo "ec3f5c9714ba0fd45cb4e087301eb1336c317e0d20b575a125050470e8089e4d  openssl-1.0.2o.tar.gz" > checksum \
-    && sha256sum -c checksum \
-    && tar zxf openssl-1.0.2o.tar.gz \
-    && cd /src/openssl-1.0.2o \
-    && ./config no-shared no-ssl2 no-async -fPIC -O2 \
-    && make -j 4 \
-    && make install \
-    && rm -rf /src
-
-# Install curl
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O http://curl.askapache.com/download/curl-7.73.0.tar.bz2 \
-    && tar jxf curl-7.73.0.tar.bz2 \
-    && cd /src/curl-7.73.0 \
-    && LIBS=-ldl CFLAGS="-O2 -Wl,-S" ./configure --with-ssl=/usr/local/ssl \
-    && make -j 4 \
-    && make install \
-    && rm -rf /src
-
-# Install geos
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O http://download.osgeo.org/geos/geos-3.9.0.tar.bz2 \
-    && tar jxf geos-3.9.0.tar.bz2 \
-    && cd /src/geos-3.9.0 \
-    && CFLAGS="-O2 -Wl,-S" CXXFLAGS="-O2 -Wl,-S" ./configure \
-    && make -j 4 \
-    && make install \
-    && rm -rf /src
-
-# Install jasper
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O http://download.osgeo.org/gdal/jasper-1.900.1.uuid.tar.gz \
-    && tar xzf jasper-1.900.1.uuid.tar.gz \
-    && cd /src/jasper-1.900.1.uuid \
-    && ./configure --disable-debug --enable-shared \
-    && make -j 4 \
-    && make install \
-    && rm -rf /src
-
-# proj4
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O http://download.osgeo.org/proj/proj-4.9.3.tar.gz \
-    && tar xzf proj-4.9.3.tar.gz \
-    && cd /src/proj-4.9.3 \
-    && ./configure CFLAGS="-O2 -Wl,-S" \
-    && make -j 4 \
-    && make install \
-    && rm -rf /src
-
-# cmake
-RUN cd /usr/local/src \
-    && curl -f -L -O http://www.cmake.org/files/v3.13/cmake-3.13.5.tar.gz \
-    && tar xzf cmake-3.13.5.tar.gz \
-    && cd cmake-3.13.5 \
-    && ./bootstrap --prefix=/usr/local/cmake \
-    && make -j 4; make install
-
-# openjpeg
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O https://github.com/uclouvain/openjpeg/archive/v2.4.0.tar.gz \
-    && tar xzf v2.4.0.tar.gz \
-    && cd /src/openjpeg-2.4.0 \
-    && mkdir -p build \
-    && cd build \
-    && /usr/local/cmake/bin/cmake .. -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr/local \
-    && make -j 4 install \
-    && make clean \
-    && rm -rf /src
-
-# hdf5
-RUN cd /usr/local/src \
-    && curl -f -L -O https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.12/hdf5-1.12.0/src/hdf5-1.12.0.tar.gz \
-    && tar xzf hdf5-1.12.0.tar.gz \
-    && cd hdf5-1.12.0 \
-    && ./configure --prefix=/usr/local --enable-shared --enable-build-mode=production CFLAGS="-O2 -Wl,-S" \
-    && make -j 4 \
-    && make install
-
-## netcdf
-RUN cd /usr/local/src \
-    && curl -f -L -O ftp://ftp.unidata.ucar.edu/pub/netcdf/netcdf-4.6.1.tar.gz \
-    && tar xzf netcdf-4.6.1.tar.gz \
-    && cd netcdf-4.6.1 \
-    && CFLAGS="-I/usr/local/include -O2 -Wl,-S" CXXFLAGS="-I/usr/local/include -O2 -Wl,-S" LDFLAGS="-L/usr/local/lib" ./configure \
-    && make -j 4 \
-    && make install
-
-## expat
-RUN cd /usr/local/src \
-    && curl -f -L -O https://github.com/libexpat/libexpat/releases/download/R_2_2_10/expat-2.2.10.tar.bz2 \
-    && tar xjf expat-2.2.10.tar.bz2 \
-    && cd expat-2.2.10 \
-    && CFLAGS="-O2 -Wl,-S" ./configure --prefix=/usr/local \
-    && make -j 4 \
-    && make install
-
-## webp
-RUN cd /usr/local/src \
-    && curl -f -L -O https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-1.2.0.tar.gz \
-    && tar xzf libwebp-1.2.0.tar.gz \
-    && cd libwebp-1.2.0 \
-    && CFLAGS="-O2 -Wl,-S" ./configure --prefix=/usr/local \
-    && make -j 4 \
-    && make install
-
-# gdal
-RUN mkdir -p /src \
-    && cd /src \
-    && curl -f -L -O http://download.osgeo.org/gdal/2.4.4/gdal-2.4.4.tar.gz \
-    && tar xzf gdal-2.4.4.tar.gz \
-    && cd /src/gdal-2.4.4 \
-    && CFLAGS="-O2 -Wl,-S" CXXFLAGS="-O2 -Wl,-S" ./configure \
-        --with-threads \
-        --disable-debug \
-        --disable-static \
-        --without-grass \
-        --without-libgrass \
-        --without-jpeg12 \
-        --with-libtiff \
-        --with-jpeg \
-        --with-pg \
-        --with-gif \
-        --with-png \
-        --with-webp \
-        --with-geotiff=internal \
-        --with-sqlite3=/usr \
-        --with-pcraster=internal \
-        --with-pcidsk=internal \
-        --with-bsb \
-        --with-grib \
-        --with-pam \
-        --with-geos=/usr/local/bin/geos-config \
-        --with-static-proj4=/usr/local \
-        --with-expat=/usr/local \
-        --with-libjson-c \
-        --with-libiconv-prefix=/usr \
-        --with-libz=/usr \
-        --with-curl=/usr/local/bin/curl-config \
-        --with-netcdf=/usr/local/netcdf \
-        --with-openjpeg \
-        --with-jasper=/usr/local \
-        --with-hdf5=/usr/local \
-        --without-python \
-        --without-hdf4 \
-    && make -j 12 \
-    && make install
-
-# Bake dev requirements into the Docker image for faster builds
-ADD requirements.txt /tmp/requirements.txt
-RUN for PYBIN in /opt/python/*/bin; do \
-        $PYBIN/pip install -U pip || true; \
-        $PYBIN/pip install -r /tmp/requirements.txt || true; \
-    done
-
-# Replace SWIG's setup.py with this modified one, which gets numpy in
-# there as a dependency.
-ADD setup.py /src/gdal-2.4.4/swig/python/setup.py
-
-# Replace the osgeo module __init__.py with this modified one, which
-# sets the GDAL_DATA and PROJ_LIB variables on import to where they've
-# been copied to.
-ADD gdalinit.py /src/gdal-2.4.4/swig/python/osgeo/__init__.py
-
-WORKDIR /io
-CMD ["/io/build-linux-wheels.sh"]

lib/GDAL-3.4.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.whl

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:8e5714dfc0a4b75cb799e1c6e70870ac1e7aeea6caad79fa0a72e7f57248c0fc
-size 76042352

lib/Makefile

@@ -1,7 +0,0 @@
-# GDAL python bindings make file.
-
-SHELL = /bin/bash
-
-wheels: Dockerfile.wheels build-linux-wheels.sh
-	docker build -f Dockerfile.wheels -t gdal-wheelbuilder .
-	docker run -v `pwd`:/io gdal-wheelbuilder

lib/build-linux-wheels.sh

@@ -1,23 +0,0 @@
-#!/bin/bash
-set -e
-
-GDAL_BUILD_PATH=/src/gdal-2.4.4/swig/python
-ORIGINAL_PATH=$PATH
-UNREPAIRED_WHEELS=/tmp/wheels
-
-# Enable devtoolset-2 for C++11
-source /opt/rh/devtoolset-2/enable
-
-# Compile wheels
-pushd ${GDAL_BUILD_PATH}
-for PYBIN in /opt/python/*/bin; do
-    export PATH=${PYBIN}:$ORIGINAL_PATH
-    rm -rf build
-    CFLAGS="-std=c++11" python setup.py bdist_wheel -d ${UNREPAIRED_WHEELS} || true
-done
-popd
-
-# Bundle GEOS into the wheels
-for whl in ${UNREPAIRED_WHEELS}/*.whl; do
-    auditwheel repair ${whl} -w wheels || true
-done

lib/gdalinit.py

@@ -1,40 +0,0 @@
-# __init__ for osgeo package.
-import os
-import sys
-
-# making the osgeo package version the same as the gdal version:
-from sys import version_info
-if version_info >= (2,6,0):
-    def swig_import_helper():
-        from os.path import dirname
-        import imp
-        fp = None
-        try:
-            fp, pathname, description = imp.find_module('_gdal', [dirname(__file__)])
-        except ImportError:
-            import _gdal
-            return _gdal
-        if fp is not None:
-            try:
-                _mod = imp.load_module('_gdal', fp, pathname, description)
-            finally:
-                fp.close()
-            return _mod
-    _gdal = swig_import_helper()
-    del swig_import_helper
-else:
-    import _gdal
-
-__version__ = _gdal.__version__ = _gdal.VersionInfo("RELEASE_NAME")
-
-# Set gdal and proj data directories.
-if 'GDAL_DATA' not in os.environ:
-    whl_datadir = os.path.abspath(os.path.join(os.path.dirname(__file__), "gdal_data"))
-    share_datadir = os.path.join(sys.prefix, 'share/gdal')
-    if os.path.exists(os.path.join(whl_datadir, 'pcs.csv')):
-        os.environ['GDAL_DATA'] = whl_datadir
-    elif os.path.exists(os.path.join(share_datadir, 'pcs.csv')):
-        os.environ['GDAL_DATA'] = share_datadir
-    if 'PROJ_LIB' not in os.environ:
-        whl_datadir = os.path.abspath(os.path.join(os.path.dirname(__file__), "proj_data"))
-        os.environ['PROJ_LIB'] = whl_datadir

lib/setup.py

@@ -1,353 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-
-# Setup script for GDAL Python bindings.
-# Inspired by psycopg2 setup.py file
-# http://www.initd.org/tracker/psycopg/browser/psycopg2/trunk/setup.py
-# Howard Butler hobu.inc@gmail.com
-
-
-gdal_version = '2.4.4'
-
-import sys
-import shutil
-import os
-
-from glob import glob
-
-# ---------------------------------------------------------------------------
-# Switches
-# ---------------------------------------------------------------------------
-
-HAVE_NUMPY=False
-HAVE_SETUPTOOLS = False
-BUILD_FOR_CHEESESHOP = False
-GNM_ENABLED = False
-
-# ---------------------------------------------------------------------------
-# Default build options
-# (may be overridden with setup.cfg or command line switches).
-# ---------------------------------------------------------------------------
-
-include_dirs = ['../../port', '../../gcore', '../../alg', '../../ogr/', '../../ogr/ogrsf_frmts', '../../gnm', '../../apps']
-library_dirs = ['../../.libs', '../../']
-libraries = ['gdal']
-
-# ---------------------------------------------------------------------------
-# Helper Functions
-# ---------------------------------------------------------------------------
-
-# Function to find numpy's include directory
-def get_numpy_include():
-    if HAVE_NUMPY:
-        return numpy.get_include()
-    else:
-        return '.'
-
-def copy_data_tree(datadir, destdir):
-    try:
-        shutil.rmtree(destdir)
-    except OSError:
-        pass
-    shutil.copytree(datadir, destdir)
-            
-# ---------------------------------------------------------------------------
-# Imports
-# ---------------------------------------------------------------------------
-
-try:
-    import numpy
-    HAVE_NUMPY = True
-    # check version
-    numpy_major = numpy.__version__.split('.')[0]
-    if int(numpy_major) < 1:
-        print("numpy version must be > 1.0.0")
-        HAVE_NUMPY = False
-    else:
-#        print ('numpy include', get_numpy_include())
-        if get_numpy_include() =='.':
-            print("numpy headers were not found!  Array support will not be enabled")
-            HAVE_NUMPY=False
-except ImportError:
-    pass
-
-fixer_names = [
-    'lib2to3.fixes.fix_import',
-    'lib2to3.fixes.fix_next',
-    'lib2to3.fixes.fix_renames',
-    'lib2to3.fixes.fix_unicode',
-    'lib2to3.fixes.fix_ws_comma',
-    'lib2to3.fixes.fix_xrange',
-]
-extra = {}
-try:
-    from setuptools import setup
-    from setuptools import Extension
-    HAVE_SETUPTOOLS = True
-except ImportError:
-    from distutils.core import setup, Extension
-
-    try:
-        from distutils.command.build_py import build_py_2to3 as build_py
-        from distutils.command.build_scripts import build_scripts_2to3 as build_scripts
-    except ImportError:
-        from distutils.command.build_py import build_py
-        from distutils.command.build_scripts import build_scripts
-    else:
-        build_py.fixer_names = fixer_names
-        build_scripts.fixer_names = fixer_names
-else:
-    if sys.version_info >= (3,):
-        from lib2to3.refactor import get_fixers_from_package
-
-        all_fixers = set(get_fixers_from_package('lib2to3.fixes'))
-        exclude_fixers = sorted(all_fixers.difference(fixer_names))
-
-        extra['use_2to3'] = True
-        extra['use_2to3_fixers'] = []
-        extra['use_2to3_exclude_fixers'] = exclude_fixers
-
-class gdal_config_error(Exception): pass
-
-
-from distutils.command.build_ext import build_ext
-from distutils.ccompiler import get_default_compiler
-
-def fetch_config(option, gdal_config='gdal-config'):
-
-    command = gdal_config + " --%s" % option
-
-    try:
-        import subprocess
-        command, args = command.split()[0], command.split()[1]
-        from sys import version_info
-        if version_info >= (3,0,0):
-            try:
-                p = subprocess.Popen([command, args], stdout=subprocess.PIPE)
-            except OSError:
-                import sys
-                e = sys.exc_info()[1]
-                raise gdal_config_error(e)
-            r = p.stdout.readline().decode('ascii').strip()
-        else:
-            exec("""try:
-    p = subprocess.Popen([command, args], stdout=subprocess.PIPE)
-except OSError, e:
-    raise gdal_config_error, e""")
-            r = p.stdout.readline().strip()
-        p.stdout.close()
-        p.wait()
-
-    except ImportError:
-
-        import popen2
-
-        p = popen2.popen3(command)
-        r = p[0].readline().strip()
-        if not r:
-            raise Warning(p[2].readline())
-
-    return r
-
-class gdal_ext(build_ext):
-
-    GDAL_CONFIG = 'gdal-config'
-    user_options = build_ext.user_options[:]
-    user_options.extend([
-        ('gdal-config=', None,
-        "The name of the gdal-config binary and/or a full path to it"),
-    ])
-
-    def initialize_options(self):
-        build_ext.initialize_options(self)
-
-        self.numpy_include_dir = get_numpy_include()
-        self.gdaldir = None
-        self.gdal_config = self.GDAL_CONFIG
-        self.already_raised_no_config_error = False
-
-    def get_compiler(self):
-        return self.compiler or get_default_compiler()
-
-    def get_gdal_config(self, option):
-        try:
-            return fetch_config(option, gdal_config = self.gdal_config)
-        except gdal_config_error:
-            # If an error is thrown, it is possibly because
-            # the gdal-config location given in setup.cfg is
-            # incorrect, or possibly the default -- ../../apps/gdal-config
-            # We'll try one time to use the gdal-config that might be
-            # on the path. If that fails, we're done, however.
-            if not self.already_raised_no_config_error:
-                self.already_raised_no_config_error = True
-                return fetch_config(option)
-
-    def finalize_options(self):
-        if self.include_dirs is None:
-            self.include_dirs = include_dirs
-        if self.library_dirs is None:
-            self.library_dirs = library_dirs
-        if self.libraries is None:
-            if self.get_compiler() == 'msvc':
-                libraries.remove('gdal')
-                libraries.append('gdal_i')
-            self.libraries = libraries
-
-        build_ext.finalize_options(self)
-
-        self.include_dirs.append(self.numpy_include_dir)
-
-        if self.get_compiler() == 'msvc':
-            return True
-
-        self.gdaldir = self.get_gdal_config('prefix')
-        self.library_dirs.append(os.path.join(self.gdaldir,'lib'))
-        self.include_dirs.append(os.path.join(self.gdaldir,'include'))
-
-
-extra_link_args = []
-extra_compile_args = []
-
-if sys.platform == 'darwin' and [int(x) for x in os.uname()[2].split('.')] >= [11, 0, 0]:
-    # since MacOS X 10.9, clang no longer accepts -mno-fused-madd
-    #extra_compile_args.append('-Qunused-arguments')
-    os.environ['ARCHFLAGS'] = '-Wno-error=unused-command-line-argument-hard-error-in-future'
-
-gdal_module = Extension('osgeo._gdal',
-                        sources=['extensions/gdal_wrap.cpp'],
-                        extra_compile_args = extra_compile_args,
-                        extra_link_args = extra_link_args)
-
-gdalconst_module = Extension('osgeo._gdalconst',
-                    sources=['extensions/gdalconst_wrap.c'],
-                    extra_compile_args = extra_compile_args,
-                    extra_link_args = extra_link_args)
-
-osr_module = Extension('osgeo._osr',
-                    sources=['extensions/osr_wrap.cpp'],
-                    extra_compile_args = extra_compile_args,
-                    extra_link_args = extra_link_args)
-
-ogr_module = Extension('osgeo._ogr',
-                    sources=['extensions/ogr_wrap.cpp'],
-                    extra_compile_args = extra_compile_args,
-                    extra_link_args = extra_link_args)
-
-
-array_module = Extension('osgeo._gdal_array',
-                    sources=['extensions/gdal_array_wrap.cpp'],
-                    extra_compile_args = extra_compile_args,
-                    extra_link_args = extra_link_args)
-
-gnm_module = Extension('osgeo._gnm',
-                    sources=['extensions/gnm_wrap.cpp'],
-                    extra_compile_args = extra_compile_args,
-                    extra_link_args = extra_link_args)
-
-ext_modules = [gdal_module,
-              gdalconst_module,
-              osr_module,
-              ogr_module]
-
-py_modules = ['gdal',
-              'ogr',
-              'osr',
-              'gdalconst']
-
-if os.path.exists('setup_vars.ini'):
-    with open('setup_vars.ini') as f:
-        lines = f.readlines()
-        if 'GNM_ENABLED=yes' in lines or 'GNM_ENABLED=yes\n' in lines:
-            GNM_ENABLED = True
-
-if GNM_ENABLED:
-    ext_modules.append(gnm_module)
-    py_modules.append('gnm')
-
-
-if HAVE_NUMPY:
-    ext_modules.append(array_module)
-    py_modules.append('gdalnumeric')
-
-packages = ["osgeo",]
-
-readme = str(open('README.rst','rb').read())
-
-name = 'GDAL'
-version = gdal_version
-author = "Frank Warmerdam"
-author_email = "warmerdam@pobox.com"
-maintainer = "Howard Butler"
-maintainer_email = "hobu.inc@gmail.com"
-description = "GDAL: Geospatial Data Abstraction Library"
-license = "MIT"
-url="http://www.gdal.org"
-
-classifiers = [
-        'Development Status :: 5 - Production/Stable',
-        'Intended Audience :: Developers',
-        'Intended Audience :: Science/Research',
-        'License :: OSI Approved :: MIT License',
-        'Operating System :: OS Independent',
-        'Programming Language :: Python :: 2',
-        'Programming Language :: Python :: 3',
-        'Programming Language :: C',
-        'Programming Language :: C++',
-        'Topic :: Scientific/Engineering :: GIS',
-        'Topic :: Scientific/Engineering :: Information Analysis',
-
-]
-
-
-if BUILD_FOR_CHEESESHOP:
-    data_files = [("osgeo/data/gdal", glob(os.path.join("../../data", "*")))]
-else:
-    data_files = None
-
-exclude_package_data = {'':['GNUmakefile']}
-
-# Copy gdal/proj data.
-copy_data_tree('/usr/local/share/gdal', 'osgeo/gdal_data')
-copy_data_tree('/usr/local/share/proj', 'osgeo/proj_data')
-
-if HAVE_SETUPTOOLS:
-    setup( name = name,
-           version = gdal_version,
-           author = author,
-           author_email = author_email,
-           maintainer = maintainer,
-           maintainer_email = maintainer_email,
-           long_description = readme,
-           description = description,
-           license = license,
-           classifiers = classifiers,
-           py_modules = py_modules,
-           packages = packages,
-           url=url,
-           data_files = data_files,
-           zip_safe = False,
-           exclude_package_data = exclude_package_data,
-           cmdclass={'build_ext':gdal_ext},
-           ext_modules = ext_modules,
-           install_requires=['numpy=={}'.format(numpy.__version__)],
-           package_data={'osgeo': ['gdal_data/*', 'proj_data/*']},
-           **extra )
-else:
-    setup( name = name,
-           version = gdal_version,
-           author = author,
-           author_email = author_email,
-           maintainer = maintainer,
-           maintainer_email = maintainer_email,
-           long_description = readme,
-           description = description,
-           license = license,
-           classifiers = classifiers,
-           py_modules = py_modules,
-           packages = packages,
-           data_files = data_files,
-           url=url,
-           cmdclass={'build_ext':gdal_ext,
-                     'build_py': build_py,
-                     'build_scripts': build_scripts},
-           ext_modules = ext_modules )