‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5— 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5— 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5 REFERENCED STANDARDS CSA — continued B64.1.3 — 11 Spill Resistant Pressure Vacuum Breaks (SRPVB) ................................................................ 608.13.8 B64.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) ......................................... Table 608.1, 608.13.6 B64.2.1 — 11 Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature .............................................................................. Table 608.1, 608.13.6 B64.2.1.1 — 11 Hose Connection Dual Check Vacuum Breakers, (HCDVB) ............................ Table 608.1, 608.13.6 B64.2.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature .......................................................................... Table 608.1, 608.13.6 B64.3 — 11 Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP) ............................................................ Table 608.1, 608.13.3, 608.16.2 B64.4 — 11 Backflow Preventers, Reduced Pressure Principle Type (RP) ........................... Table 608.1, 608.13.2 B64.4.1 — 11 Reduced Pressure Principle for Fire Sprinklers (RPF) ...................................... Table 608.1, 608.13.2 B64.5 —11 Double Check Backflow Preventers (DCVA) ................................................... Table 608.1, 608.13.7 B64.5.1 — 11 Double Check Valve Backflow Preventer for Fire Systems (DCVAF) .............. Table 608.1 608.13.7 B64.6 — 11 Dual Check Backflow Preventers Valve (DuC) ............................................. Table 608.1, 608.13.10 B64.7 — 11 Laboratory Faucet Vacuum Breakers (LFVB) .................................................. Table 608.1, 608.13.6 B64.10 — 11 Manual for the Selection and Installation of Backflow Prevention Devices ........................... 312.10.2 B64.10.1 — 11 Maintenance and Field Testing of Backflow Preventers ........................................................ 312.10.2 B79— 08(R2013) Commercial a nd Residential Drains, and Cleanouts ................................................................... 412.1 B125.3 — 2012 Plumbing Fittings ......................................... 408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7 B137.2 — 02 PVC Injection - Moulded Gasketed Fittings for Pressure Applications ............................ Table 1102.7 B137.3 — 13 Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications ....................................... 705.11.2 B181.1 — 11 Acrylonitrile - butadiene - styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings ...................... Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7 B181.2 — 11 Polyvinylchloride PVC and chlorinated polyvinylchlo ride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings .............................. Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4 B181.3 — 11 Polyolefin and P olyvinylidene Fluoride (PVDF) Laboratory Drainage Systems ........ Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7 B182.1 — 11 Plastic Drain and Sewer Pipe and Pipe Fittings ............................................. 705.11.2, Table 1102.5 B18 2.2 — 11 PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.4 — 11 Profile Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.6 — 11 Profile Polyethylene (PE) Sewer Pi pe and Fittings for Leak - proof Sewer Applications .................................................................................. Table 1102.5 B182.8 — 11 P rofile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings ......................... Table 1102.5 B356 — 10 Water Pressure Reducing Valves for Domestic Water Systems ................................................. 604.8 B483.1 — 2007(R2012) ‡ Drinking Water Treatment Units ...................................................................................... 611.1, 611.2 B602 — 10 Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe .................. 705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16 IAPMO IAPMO Group 4755 E. Philadelphia Ontario, CA 91761 Standard Referenced reference in code number Title section number PS 117 — 08 Copper and Copper Allow Tubing System Incorporating Press - type or Nail - type Connections ...................................................................................................... 605.14.4 CSA B45.5 — 11/ ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5 REFERENCED STANDARDS CSA — continued B64.1.3 — 11 Spill Resistant Pressure Vacuum Breaks (SRPVB) ................................................................ 608.13.8 B64.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) ......................................... Table 608.1, 608.13.6 B64.2.1 — 11 Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature .............................................................................. Table 608.1, 608.13.6 B64.2.1.1 — 11 Hose Connection Dual Check Vacuum Breakers, (HCDVB) ............................ Table 608.1, 608.13.6 B64.2.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature .......................................................................... Table 608.1, 608.13.6 B64.3 — 11 Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP) ............................................................ Table 608.1, 608.13.3, 608.16.2 B64.4 — 11 Backflow Preventers, Reduced Pressure Principle Type (RP) ........................... Table 608.1, 608.13.2 B64.4.1 — 11 Reduced Pressure Principle for Fire Sprinklers (RPF) ...................................... Table 608.1, 608.13.2 B64.5 —11 Double Check Backflow Preventers (DCVA) ................................................... Table 608.1, 608.13.7 B64.5.1 — 11 Double Check Valve Backflow Preventer for Fire Systems (DCVAF) .............. Table 608.1 608.13.7 B64.6 — 11 Dual Check Backflow Preventers Valve (DuC) ............................................. Table 608.1, 608.13.10 B64.7 — 11 Laboratory Faucet Vacuum Breakers (LFVB) .................................................. Table 608.1, 608.13.6 B64.10 — 11 Manual for the Selection and Installation of Backflow Prevention Devices ........................... 312.10.2 B64.10.1 — 11 Maintenance and Field Testing of Backflow Preventers ........................................................ 312.10.2 B79— 08(R2013) Commercial a nd Residential Drains, and Cleanouts ................................................................... 412.1 B125.3 — 2012 Plumbing Fittings ......................................... 408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7 B137.2 — 02 PVC Injection - Moulded Gasketed Fittings for Pressure Applications ............................ Table 1102.7 B137.3 — 13 Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications ....................................... 705.11.2 B181.1 — 11 Acrylonitrile - butadiene - styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings ...................... Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7 B181.2 — 11 Polyvinylchloride PVC and chlorinated polyvinylchlo ride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings .............................. Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4 B181.3 — 11 Polyolefin and P olyvinylidene Fluoride (PVDF) Laboratory Drainage Systems ........ Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7 B182.1 — 11 Plastic Drain and Sewer Pipe and Pipe Fittings ............................................. 705.11.2, Table 1102.5 B18 2.2 — 11 PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.4 — 11 Profile Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.6 — 11 Profile Polyethylene (PE) Sewer Pi pe and Fittings for Leak - proof Sewer Applications .................................................................................. Table 1102.5 B182.8 — 11 P rofile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings ......................... Table 1102.5 B356 — 10 Water Pressure Reducing Valves for Domestic Water Systems ................................................. 604.8 B483.1 — 2007(R2012) ‡ Drinking Water Treatment Units ...................................................................................... 611.1, 611.2 B602 — 10 Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe .................. 705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16 IAPMO IAPMO Group 4755 E. Philadelphia Ontario, CA 91761 Standard Referenced reference in code number Title section number PS 117 — 08 Copper and Copper Allow Tubing System Incorporating Press - type or Nail - type Connections ...................................................................................................... 605.14.4 CSA B45.5 — 11/ REFERENCED STANDARDS IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 ICC International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001 Standard Referenced reference in code number Title section number A117.1 — 2009 Ac cessible and Usable Buildings and Facilities ............................................................... 404.2, 410.1 ISEA International Safety Equipment Association 1901 N. Moore Street, Suite 808 Arlington, VA 22209 Standard Referenced reference in code number Title section number ANSI/ISEA Z358.1 — 2009 Emerge ncy Eyewash and Shower Equipment ............................................................................ 411.1 MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park St. NE Vienna, VA 22180 - 4602 Standard Referenced reference in code number Title section number SP - 67 — 2011 Butterfly Valve s ................................................................................................................ Table 605.7 SP - 70 — 2011 Gray Iron Gate Valves, Flanged and Threaded Ends ......................................................... Table 605.7 SP - 71 — 2011 Gray Iron Swing Check Valves, Flanged and Threaded Ends ........................................... Table 605.7 SP - 72 — 2010 Ball Valves with Flanged or Butt - Welding Ends for General Service ............................... Table 605.7 SP - 78 — 2011 Cast Iron Plug Valves, Flanged and Threaded Ends .......................................................... Table 605.7 SP - 80 — 2008 Bronze Gate, Globe, Angle and Check Valves .................................................................. Table 605.7 SP - 110 — 2010 Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends .............. Table 605.7 NFPA Nation al Fire Protection Association 1 Batterymarch Park Quincy, MA 02169 - 7471 Standard Referenced reference in code number Title section number 51 — 13 Design and Installation of Oxygen - fuel Gas Systems for Welding, Cutting and Allied Processes ....................................................................................................... 1201.1, 1203.1 55 — 13 Compressed Gases and Cryogenic Fluids Code ........................................................... 1201.1, 1203.1 99 — 15 Health Care Facilities Code .......................................................................................... 1201.1, 1202.1 REFERENCED STANDARDS NSF NSF International 789 Dixboro Road Ann Arbor, MI 48105 Standard Referenced reference in code number Title section number 3— 2010 Commercial Warewashing Equipment ....................................................................................... 409.1 14 — 2011 Plastic Piping System Components and Related Materials ............................................... 303.3, 611.3 18 — 2012 Manual Food and Beverage Dispensing Equipment ................................................................... 426.1 42 — 2011 Drinking Water Treatment Units - Aesthetic Effects .......................................................... 611.1, 611.3 44 — 2012 Res idential Cation Exchange Water Softeners ................................................................ . 611.1, 611.3 53 — 2011a Drinking Water Treatment Units — Health Effects ........................................................... 611.1, 611.3 58 — 2012 Reverse Osmosis Drinking Water Treatment Systems ..................................................... 611.2, 611.3 61 — 2012 Drinking Water System Components — Health Effects ............... 410.1, 4 24.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3 62 — 2012 Drinking Water Distillation Systems .......................................................................................... 611.1 372 — 2010 Drinking Water Systems Components — Lead Content .............................................................. 605.2 PDI Plumbing and Drainage Institute 800 Turnpike Street, Suite 300 North Andover, MA 01845 Standard Referenced reference in code number Title section number G101 (2012) Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Ins tallation Data .......................................................................... 1003.3.4 UL UL LLC 333 Pfingsten Road Northbrook, IL 60062 - 2096 Standard Referenced reference in code number Title section number 58 – 1996 Steel Underground Tanks for Flammable and Combustible Liquids - with revisions through July 27, 1998 ....................................................................................... 1302.7.2, 1303.10.2 142 – 2006 Steel Aboveground Tanks for Flammable and Combustible Liquids - with revisions through February 12, 2010 ............................................................................................ 1302.7.2, 1303.10.2 1 74 — 2004 Household Electric Storage Tank Water Heaters — with revisions through September 2012 ..... 502.1 430 — 2009 Waste Disposers — with revisions through March 23, 2011 ........................................................ 413.1 732 — 1995 Oil - fired Storage Tank Water Heaters — with revisions through April 2010 .............................. 502.1 921 — 2004 Integral Gas Fired Heating Commercial Dishwashers ................................................................ 409.1 1316 – 1994 Glass - Fiber Reinforced Plastic Underground Storage Tanks for Petrolium Products, Alcohols and Alcohol Gasoline Mixtures - with revisions through May 12, 2006 ............................................................... 1302.7.2, 1303.10.2 1453 — 2004 Electric Booster and Commercial Storage Tank Water Heaters — with revisions through July 2011 ........................................................................................... 502.1 1746 – 2007 External Corrosion Protection Systems for Steel Underground Storage Tanks .... 1302.7.2, 1303.10.2 1795 — 2009 Hydromassage Bathtubs including revisions through August 23, 2011 ..................................... 421.1 REFERENCED STANDARDS WaterSense WaterSense US Environmental Protection Agency Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, N.W. Washington, D.C. 20460 Standard Referenced reference in code number Title section number v.1.0 — October 1, 2007 High - efficiency Lavatory Faucet Specifications ...................................................................... 604.4.1 v.1.0 — October 8, 2009 WaterSense Specification for Flushing Urinals ........................................................................ 604.4.1 v.1.0 — December 17, 2015 WaterSense Specification for Flushometer - Valve Water Closets ............................................. 604 .4.1 v.1.1 — July 26, 2018 WaterSense Specification for Showerheads ............................................................................. 604.4.1 v.1.2 — June 2, 2014 WaterSense Specification for Tank - Type Toilets ..................................................................... 604.4.1 ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5 REFERENCED STANDARDS CSA — continued B64.1.3 — 11 Spill Resistant Pressure Vacuum Breaks (SRPVB) ................................................................ 608.13.8 B64.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) ......................................... Table 608.1, 608.13.6 B64.2.1 — 11 Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature .............................................................................. Table 608.1, 608.13.6 B64.2.1.1 — 11 Hose Connection Dual Check Vacuum Breakers, (HCDVB) ............................ Table 608.1, 608.13.6 B64.2.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature .......................................................................... Table 608.1, 608.13.6 B64.3 — 11 Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP) ............................................................ Table 608.1, 608.13.3, 608.16.2 B64.4 — 11 Backflow Preventers, Reduced Pressure Principle Type (RP) ........................... Table 608.1, 608.13.2 B64.4.1 — 11 Reduced Pressure Principle for Fire Sprinklers (RPF) ...................................... Table 608.1, 608.13.2 B64.5 —11 Double Check Backflow Preventers (DCVA) ................................................... Table 608.1, 608.13.7 B64.5.1 — 11 Double Check Valve Backflow Preventer for Fire Systems (DCVAF) .............. Table 608.1 608.13.7 B64.6 — 11 Dual Check Backflow Preventers Valve (DuC) ............................................. Table 608.1, 608.13.10 B64.7 — 11 Laboratory Faucet Vacuum Breakers (LFVB) .................................................. Table 608.1, 608.13.6 B64.10 — 11 Manual for the Selection and Installation of Backflow Prevention Devices ........................... 312.10.2 B64.10.1 — 11 Maintenance and Field Testing of Backflow Preventers ........................................................ 312.10.2 B79— 08(R2013) Commercial a nd Residential Drains, and Cleanouts ................................................................... 412.1 B125.3 — 2012 Plumbing Fittings ......................................... 408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7 B137.2 — 02 PVC Injection - Moulded Gasketed Fittings for Pressure Applications ............................ Table 1102.7 B137.3 — 13 Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications ....................................... 705.11.2 B181.1 — 11 Acrylonitrile - butadiene - styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings ...................... Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7 B181.2 — 11 Polyvinylchloride PVC and chlorinated polyvinylchlo ride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings .............................. Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4 B181.3 — 11 Polyolefin and P olyvinylidene Fluoride (PVDF) Laboratory Drainage Systems ........ Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7 B182.1 — 11 Plastic Drain and Sewer Pipe and Pipe Fittings ............................................. 705.11.2, Table 1102.5 B18 2.2 — 11 PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.4 — 11 Profile Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.6 — 11 Profile Polyethylene (PE) Sewer Pi pe and Fittings for Leak - proof Sewer Applications .................................................................................. Table 1102.5 B182.8 — 11 P rofile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings ......................... Table 1102.5 B356 — 10 Water Pressure Reducing Valves for Domestic Water Systems ................................................. 604.8 B483.1 — 2007(R2012) ‡ Drinking Water Treatment Units ...................................................................................... 611.1, 611.2 B602 — 10 Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe .................. 705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16 IAPMO IAPMO Group 4755 E. Philadelphia Ontario, CA 91761 Standard Referenced reference in code number Title section number PS 117 — 08 Copper and Copper Allow Tubing System Incorporating Press - type or Nail - type Connections ...................................................................................................... 605.14.4 CSA B45.5 — 11/ REFERENCED STANDARDS IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 ICC International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001 Standard Referenced reference in code number Title section number A117.1 — 2009 Ac cessible and Usable Buildings and Facilities ............................................................... 404.2, 410.1 ISEA International Safety Equipment Association 1901 N. Moore Street, Suite 808 Arlington, VA 22209 Standard Referenced reference in code number Title section number ANSI/ISEA Z358.1 — 2009 Emerge ncy Eyewash and Shower Equipment ............................................................................ 411.1 MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park St. NE Vienna, VA 22180 - 4602 Standard Referenced reference in code number Title section number SP - 67 — 2011 Butterfly Valve s ................................................................................................................ Table 605.7 SP - 70 — 2011 Gray Iron Gate Valves, Flanged and Threaded Ends ......................................................... Table 605.7 SP - 71 — 2011 Gray Iron Swing Check Valves, Flanged and Threaded Ends ........................................... Table 605.7 SP - 72 — 2010 Ball Valves with Flanged or Butt - Welding Ends for General Service ............................... Table 605.7 SP - 78 — 2011 Cast Iron Plug Valves, Flanged and Threaded Ends .......................................................... Table 605.7 SP - 80 — 2008 Bronze Gate, Globe, Angle and Check Valves .................................................................. Table 605.7 SP - 110 — 2010 Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends .............. Table 605.7 NFPA Nation al Fire Protection Association 1 Batterymarch Park Quincy, MA 02169 - 7471 Standard Referenced reference in code number Title section number 51 — 13 Design and Installation of Oxygen - fuel Gas Systems for Welding, Cutting and Allied Processes ....................................................................................................... 1201.1, 1203.1 55 — 13 Compressed Gases and Cryogenic Fluids Code ........................................................... 1201.1, 1203.1 99 — 15 Health Care Facilities Code .......................................................................................... 1201.1, 1202.1 REFERENCED STANDARDS NSF NSF International 789 Dixboro Road Ann Arbor, MI 48105 Standard Referenced reference in code number Title section number 3— 2010 Commercial Warewashing Equipment ....................................................................................... 409.1 14 — 2011 Plastic Piping System Components and Related Materials ............................................... 303.3, 611.3 18 — 2012 Manual Food and Beverage Dispensing Equipment ................................................................... 426.1 42 — 2011 Drinking Water Treatment Units - Aesthetic Effects .......................................................... 611.1, 611.3 44 — 2012 Res idential Cation Exchange Water Softeners ................................................................ . 611.1, 611.3 53 — 2011a Drinking Water Treatment Units — Health Effects ........................................................... 611.1, 611.3 58 — 2012 Reverse Osmosis Drinking Water Treatment Systems ..................................................... 611.2, 611.3 61 — 2012 Drinking Water System Components — Health Effects ............... 410.1, 4 24.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3 62 — 2012 Drinking Water Distillation Systems .......................................................................................... 611.1 372 — 2010 Drinking Water Systems Components — Lead Content .............................................................. 605.2 PDI Plumbing and Drainage Institute 800 Turnpike Street, Suite 300 North Andover, MA 01845 Standard Referenced reference in code number Title section number G101 (2012) Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Ins tallation Data .......................................................................... 1003.3.4 UL UL LLC 333 Pfingsten Road Northbrook, IL 60062 - 2096 Standard Referenced reference in code number Title section number 58 – 1996 Steel Underground Tanks for Flammable and Combustible Liquids - with revisions through July 27, 1998 ....................................................................................... 1302.7.2, 1303.10.2 142 – 2006 Steel Aboveground Tanks for Flammable and Combustible Liquids - with revisions through February 12, 2010 ............................................................................................ 1302.7.2, 1303.10.2 1 74 — 2004 Household Electric Storage Tank Water Heaters — with revisions through September 2012 ..... 502.1 430 — 2009 Waste Disposers — with revisions through March 23, 2011 ........................................................ 413.1 732 — 1995 Oil - fired Storage Tank Water Heaters — with revisions through April 2010 .............................. 502.1 921 — 2004 Integral Gas Fired Heating Commercial Dishwashers ................................................................ 409.1 1316 – 1994 Glass - Fiber Reinforced Plastic Underground Storage Tanks for Petrolium Products, Alcohols and Alcohol Gasoline Mixtures - with revisions through May 12, 2006 ............................................................... 1302.7.2, 1303.10.2 1453 — 2004 Electric Booster and Commercial Storage Tank Water Heaters — with revisions through July 2011 ........................................................................................... 502.1 1746 – 2007 External Corrosion Protection Systems for Steel Underground Storage Tanks .... 1302.7.2, 1303.10.2 1795 — 2009 Hydromassage Bathtubs including revisions through August 23, 2011 ..................................... 421.1 REFERENCED STANDARDS WaterSense WaterSense US Environmental Protection Agency Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, N.W. Washington, D.C. 20460 Standard Referenced reference in code number Title section number v.1.0 — October 1, 2007 High - efficiency Lavatory Faucet Specifications ...................................................................... 604.4.1 v.1.0 — October 8, 2009 WaterSense Specification for Flushing Urinals ........................................................................ 604.4.1 v.1.0 — December 17, 2015 WaterSense Specification for Flushometer - Valve Water Closets ............................................. 604 .4.1 v.1.1 — July 26, 2018 WaterSense Specification for Showerheads ............................................................................. 604.4.1 v.1.2 — June 2, 2014 WaterSense Specification for Tank - Type Toilets ..................................................................... 604.4.1 ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5 REFERENCED STANDARDS CSA — continued B64.1.3 — 11 Spill Resistant Pressure Vacuum Breaks (SRPVB) ................................................................ 608.13.8 B64.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) ......................................... Table 608.1, 608.13.6 B64.2.1 — 11 Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature .............................................................................. Table 608.1, 608.13.6 B64.2.1.1 — 11 Hose Connection Dual Check Vacuum Breakers, (HCDVB) ............................ Table 608.1, 608.13.6 B64.2.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature .......................................................................... Table 608.1, 608.13.6 B64.3 — 11 Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP) ............................................................ Table 608.1, 608.13.3, 608.16.2 B64.4 — 11 Backflow Preventers, Reduced Pressure Principle Type (RP) ........................... Table 608.1, 608.13.2 B64.4.1 — 11 Reduced Pressure Principle for Fire Sprinklers (RPF) ...................................... Table 608.1, 608.13.2 B64.5 —11 Double Check Backflow Preventers (DCVA) ................................................... Table 608.1, 608.13.7 B64.5.1 — 11 Double Check Valve Backflow Preventer for Fire Systems (DCVAF) .............. Table 608.1 608.13.7 B64.6 — 11 Dual Check Backflow Preventers Valve (DuC) ............................................. Table 608.1, 608.13.10 B64.7 — 11 Laboratory Faucet Vacuum Breakers (LFVB) .................................................. Table 608.1, 608.13.6 B64.10 — 11 Manual for the Selection and Installation of Backflow Prevention Devices ........................... 312.10.2 B64.10.1 — 11 Maintenance and Field Testing of Backflow Preventers ........................................................ 312.10.2 B79— 08(R2013) Commercial a nd Residential Drains, and Cleanouts ................................................................... 412.1 B125.3 — 2012 Plumbing Fittings ......................................... 408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7 B137.2 — 02 PVC Injection - Moulded Gasketed Fittings for Pressure Applications ............................ Table 1102.7 B137.3 — 13 Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications ....................................... 705.11.2 B181.1 — 11 Acrylonitrile - butadiene - styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings ...................... Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7 B181.2 — 11 Polyvinylchloride PVC and chlorinated polyvinylchlo ride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings .............................. Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4 B181.3 — 11 Polyolefin and P olyvinylidene Fluoride (PVDF) Laboratory Drainage Systems ........ Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7 B182.1 — 11 Plastic Drain and Sewer Pipe and Pipe Fittings ............................................. 705.11.2, Table 1102.5 B18 2.2 — 11 PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.4 — 11 Profile Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.6 — 11 Profile Polyethylene (PE) Sewer Pi pe and Fittings for Leak - proof Sewer Applications .................................................................................. Table 1102.5 B182.8 — 11 P rofile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings ......................... Table 1102.5 B356 — 10 Water Pressure Reducing Valves for Domestic Water Systems ................................................. 604.8 B483.1 — 2007(R2012) ‡ Drinking Water Treatment Units ...................................................................................... 611.1, 611.2 B602 — 10 Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe .................. 705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16 IAPMO IAPMO Group 4755 E. Philadelphia Ontario, CA 91761 Standard Referenced reference in code number Title section number PS 117 — 08 Copper and Copper Allow Tubing System Incorporating Press - type or Nail - type Connections ...................................................................................................... 605.14.4 CSA B45.5 — 11/ REFERENCED STANDARDS IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 ICC International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001 Standard Referenced reference in code number Title section number A117.1 — 2009 Ac cessible and Usable Buildings and Facilities ............................................................... 404.2, 410.1 ISEA International Safety Equipment Association 1901 N. Moore Street, Suite 808 Arlington, VA 22209 Standard Referenced reference in code number Title section number ANSI/ISEA Z358.1 — 2009 Emerge ncy Eyewash and Shower Equipment ............................................................................ 411.1 MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park St. NE Vienna, VA 22180 - 4602 Standard Referenced reference in code number Title section number SP - 67 — 2011 Butterfly Valve s ................................................................................................................ Table 605.7 SP - 70 — 2011 Gray Iron Gate Valves, Flanged and Threaded Ends ......................................................... Table 605.7 SP - 71 — 2011 Gray Iron Swing Check Valves, Flanged and Threaded Ends ........................................... Table 605.7 SP - 72 — 2010 Ball Valves with Flanged or Butt - Welding Ends for General Service ............................... Table 605.7 SP - 78 — 2011 Cast Iron Plug Valves, Flanged and Threaded Ends .......................................................... Table 605.7 SP - 80 — 2008 Bronze Gate, Globe, Angle and Check Valves .................................................................. Table 605.7 SP - 110 — 2010 Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends .............. Table 605.7 NFPA Nation al Fire Protection Association 1 Batterymarch Park Quincy, MA 02169 - 7471 Standard Referenced reference in code number Title section number 51 — 13 Design and Installation of Oxygen - fuel Gas Systems for Welding, Cutting and Allied Processes ....................................................................................................... 1201.1, 1203.1 55 — 13 Compressed Gases and Cryogenic Fluids Code ........................................................... 1201.1, 1203.1 99 — 15 Health Care Facilities Code .......................................................................................... 1201.1, 1202.1 REFERENCED STANDARDS NSF NSF International 789 Dixboro Road Ann Arbor, MI 48105 Standard Referenced reference in code number Title section number 3— 2010 Commercial Warewashing Equipment ....................................................................................... 409.1 14 — 2011 Plastic Piping System Components and Related Materials ............................................... 303.3, 611.3 18 — 2012 Manual Food and Beverage Dispensing Equipment ................................................................... 426.1 42 — 2011 Drinking Water Treatment Units - Aesthetic Effects .......................................................... 611.1, 611.3 44 — 2012 Res idential Cation Exchange Water Softeners ................................................................ . 611.1, 611.3 53 — 2011a Drinking Water Treatment Units — Health Effects ........................................................... 611.1, 611.3 58 — 2012 Reverse Osmosis Drinking Water Treatment Systems ..................................................... 611.2, 611.3 61 — 2012 Drinking Water System Components — Health Effects ............... 410.1, 4 24.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3 62 — 2012 Drinking Water Distillation Systems .......................................................................................... 611.1 372 — 2010 Drinking Water Systems Components — Lead Content .............................................................. 605.2 PDI Plumbing and Drainage Institute 800 Turnpike Street, Suite 300 North Andover, MA 01845 Standard Referenced reference in code number Title section number G101 (2012) Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Ins tallation Data .......................................................................... 1003.3.4 UL UL LLC 333 Pfingsten Road Northbrook, IL 60062 - 2096 Standard Referenced reference in code number Title section number 58 – 1996 Steel Underground Tanks for Flammable and Combustible Liquids - with revisions through July 27, 1998 ....................................................................................... 1302.7.2, 1303.10.2 142 – 2006 Steel Aboveground Tanks for Flammable and Combustible Liquids - with revisions through February 12, 2010 ............................................................................................ 1302.7.2, 1303.10.2 1 74 — 2004 Household Electric Storage Tank Water Heaters — with revisions through September 2012 ..... 502.1 430 — 2009 Waste Disposers — with revisions through March 23, 2011 ........................................................ 413.1 732 — 1995 Oil - fired Storage Tank Water Heaters — with revisions through April 2010 .............................. 502.1 921 — 2004 Integral Gas Fired Heating Commercial Dishwashers ................................................................ 409.1 1316 – 1994 Glass - Fiber Reinforced Plastic Underground Storage Tanks for Petrolium Products, Alcohols and Alcohol Gasoline Mixtures - with revisions through May 12, 2006 ............................................................... 1302.7.2, 1303.10.2 1453 — 2004 Electric Booster and Commercial Storage Tank Water Heaters — with revisions through July 2011 ........................................................................................... 502.1 1746 – 2007 External Corrosion Protection Systems for Steel Underground Storage Tanks .... 1302.7.2, 1303.10.2 1795 — 2009 Hydromassage Bathtubs including revisions through August 23, 2011 ..................................... 421.1 REFERENCED STANDARDS WaterSense WaterSense US Environmental Protection Agency Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, N.W. Washington, D.C. 20460 Standard Referenced reference in code number Title section number v.1.0 — October 1, 2007 High - efficiency Lavatory Faucet Specifications ...................................................................... 604.4.1 v.1.0 — October 8, 2009 WaterSense Specification for Flushing Urinals ........................................................................ 604.4.1 v.1.0 — December 17, 2015 WaterSense Specification for Flushometer - Valve Water Closets ............................................. 604 .4.1 v.1.1 — July 26, 2018 WaterSense Specification for Showerheads ............................................................................. 604.4.1 v.1.2 — June 2, 2014 WaterSense Specification for Tank - Type Toilets ..................................................................... 604.4.1 ‡‡‡ Chapter 15 was amended by Local Law 77 of 2023 . This law has an effective date of June 10, 2023. CHAPTER 15 REFERENCED STANDARDS SECTION PC 1501 GENERAL 1501.1 General. This chapter lists the standards that are referenced in various sections of this document. The stand- ards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard. ‡‡‡ 1501.2 Subsequent additions, modifications or deletions. Refer to the rules of the department for any sub- sequent additions, modifications or deletions that may have been made to these standards in accordance with Section 28 - 103.19 of the Administrative Cod e. 1501.3 Applicability. The application of the referenced standards shall be as specified in Section 102.8. SECTION PC 1502 STANDARDS AHRI Air - Conditioning, Heating, & Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203 Stand ard Referenced reference in code number Title section number 1010 — 02 Self - contained, Mechanically Refrigerated Drinking - Water Coolers ......................................... 410.1 810 — 16 Addendum 1 Performance Rating of Automatic Commercial Ice - makers ..................................................... 428.1.1 ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Referenced reference in code number Title section number A118.10 — 99 Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin Set Ceramic Tile and Dimension Stone Installation ......................................................................... 417.5.2.5, 417.5.2.6 Z4.3 — 95 Minimum Requirements for Nonsewered Waste - disposal Systems ........................................... 311.1 Z21.22 — 99 (R2003) Relief Valves for Hot Water Supply Systems with Addenda Z21.22a — 2000 (R2003) and Z21.22b — 2001 (R2003) .................................................. 504.2, 504.4, 504.4.1 CSA B45.5 — 11/ IAPMO Z124 — 11 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 API REFERENCED STANDARDS American Petroleum Institute 1220 L Street NW Washington, DC 20005 - 4070 Standard Referenced reference in code number Title section number 12D – 2008 Specification for Field Welded Tanks for Storage of Production Liquids, E ffective April 1, 2009 ......................................................................................... 1302.7.2, 1303.10.2 12F – 2008 Specification for Shop Welded Tanks for Storage of Production Liquids, effective April 1, 2009 ..................................................................................... 1302.7.2, 1 303.10.2 ASCE/SEI American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191 - 4400 Standard Referenced reference in code number Title section number 24 — 14 Flood Resistant Design and Construction .................................................................... 715.1, 1101.9.1 ASME American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 - 5990 Standard Referenced reference in code number Title section number A112.1.2 — 2004 Air Gaps in Plumbing Systems .................................................... 406.1, 409.2, Table 608.1, 608.13.1 A112.1.3 — 2000 (R2011) Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances .................................................................. 406.1, 409.2, Table 608.1, 608.13.1 A112.3.1 — 2007 Stainless Steel Drainage Systems for Sanitary, DWV, Storm and Vacuum Applications Above and Below Ground ................. 412.1, Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, 1102.6, Table 1102.7 ASME A112 .3.4 — 2013/ CSA B45.9 — 2013 Macerating Toilet Systems and Related Components .............................................................. 712.4.1 A112.4.1 — 2009 Water Heater Relief Valve Drain Tubes ..................................................................................... 504.6 A112.4.2 — 2009 Water Closet Personal Hygiene Devices .................................................................................... 424.9 A112.4.3 — 1999 (R2010) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System ........................ 405.4 A112.4.14 — 2017 ‡ Manually Operated Valves for Use in Plumbing Systems ‡ ............................................... Table 605.7 A112.6.1M — 1997 (R2008) Floor - affixed Supports for Off - the - floor Plumbing Fixtures for Public Use ............................ 405.4.3 A112.6.2 — 2017 ‡ Framing - affixed Supports (Carriers) for Off - the -F loor Plumbing Fixtures ‡ ............................. 405.4.3 A112.6.3 — 2001 (R2007) Floor and Trench Drains ............................................................................................................. 412.1 A112.6.4 — 2003 (R2008) Roof, Deck, and Balcony Drains ............................................................................................... 1102.6 A112.6.7 — 2010 Enameled and Epoxy - coated Cast - ir on and PVC Plastic Sanitary Floor Sinks .......................... 427.1 A112.6.9 — 2005 (R201 5) ‡ Siphonic Roof Drains ................................................................................................................ 1107.1 A112.14.1 — 2003 Backwater Valves ....................................................................................................................... 715.2 A112.14.3 — 2000 Grease Interceptors ............................................................................................................... 1003.3.4 A112.14.4 — 2001 (Reaffirmed 2007) Grease Removal Devices ........................................................................................................ 1003.3.4 A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 A112.18.2 — 2011/ REFERENCED STANDARDS CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 A112.18.3 — 2002 (Reaffirmed 2008) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings ......................................................................................................................... 424.2, 424.6 A112.18.6/ CSA B125.6 — 2009 Flexible Water Connectors ......................................................................................................... 605.6 A112.18.9 — 2011 Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures .......................... 404.3 A112.19.1 — 2013/ CSA B45.2 — 2013 Enameled Cast Iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 A112.19.2 — 2013/ CSA B45.1 — 13 Ceramic Plumbing Fixtures ............................................................ 401.2, 405.9, 407.1, 408.1, 410.1, ......................................................................................... 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless Steel Plumbing Fixtures ........................................ 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals, and Tanks ................................................. 425.4 A112.19.7M — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Sy stems ...................................................................................... 421.1, 421.4 A112.19.12 — 2006 Wall Mounted and Pedestal Mounted, Adjustable, Elevating, Tilting and Pivoting Lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Systems .................... 416.4, 418.3 A112.19.14 — 2006(R2011) Six - Liter Water Closets Equipped with a Dual Flushing Device ................................................ 420.1 A112.19.15 — 2005 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors ................................................ 407.4, 421.6 A112.19.19 — 2006 Vitreous China Nonwater Urinals .............................................................................................. 419.1 A112.21.3 — 1985(R2007) Hydrants for Utility and Maintenance Use ........................................................ Table 608.1, 608.13.6 A112.3 6.2M — 1991 (R2008) Cleanouts ............................................................................................................................. 709.1.10.2 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ................................ . 424.3, 424.4, 607.4 B1.20.1 — 1983(R2006) Pipe Threads, General Purpose (inch) .................... 605.11.3, 605.13.4, 705.2.3, 705.3.3, 705.6.4, 705.9.1, 705.11.3, 803.3.4.1.3 B16.3 — 2011 Malleable Iron Threaded Fittings Classes 150 and 300 .............................. Table 702.4, Table 1102.7 B16.4 — 2011 Gray Iron Threaded Fittings Classes 125 and 250 ................. Table 605.5, Table 702.4, Table 1102.7 B16.12 — 2009 Cast - iron Threaded Drainage Fittings ...................................................... Table 702.4, Tabl e 1102.7 B16.15 — 2011 Cast Bronze Threaded Fittings ..................................................................... Table 605.5, Table 702.4 B16.18 — 2012 Cast Copper Alloy Solder Joint Pressure Fittings ......................................... Table 605.5, Table 702.4 B16.22 — 2001 (R2010) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings .............. Table 605 .5, Table 702.4 B16.23 — 2011 Cast Copper Alloy Solder Joint Drainage Fittings (DWV) .............................................. Table 702.4 B16.26 — 2011 Cast Copper Alloy Fittings for Flared Copper Tubes ................................... Table 605.5, Table 702.4 B16.29 — 2012 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV) ...... Table 702.4 B31.9 — 2017 Building Services Piping ........................................................................................................ 605.23.2 BPVC — 2010 Boiler and Pressure Vessel Code ................................................................................. 312.11.1, 501.2 ASPE American Society of Plumbing Engineers 8614 Catalpa Avenue, Suite 1007 Chicago, IL 60656 - 1116 Standard Referenced reference in code number Title section number 45 — 2013 Siphonic Roof Drainage Systems .............................................................................................. 1107.1 REFERENCED STANDARDS ASSE American Society of Sanitary Engineering 901 Canterbury Road, Suite A Westlake, OH 44145 Standard Referenced reference in code number Title section number 1001 — 08 Performance Requirements for Atmospheric Type Vacuum Breakers ............................................................ 425.2, Table 608.1, 608.13.6, 608.16.4.1 1002 — 08 Performance Requirements for Antisiphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ............................................................................... 425.3.1, Table 608.1 1003 — 09 Performance Requirements for Water Pressure Reducing Valves .............................................. 604.8 1004 — 08 Performance Requirements for Backflow Prevention Requirements for Commercial Dishwashing Machines ................................................................................................ ................................ 409.1 1008 — 06 Performance Requirements for Plumbing Aspects of Food Waste Disposer Units .................... 413.1 1010 — 04 Performance Requirements for Water Hammer Arresters .......................................................... 604.9 1011 — 04 Performance Requirements for Hose Connection Vacuum Breakers ................ Table 608.1, 608.13.6 1012 — 09 Performance Requirements for Backflow Preventers with Inter mediate Atmospheric Vent .............................................................................. Table 608.1, 608.13.3, 608.16.2 1013 — 09 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers ............... Table 608.1, 608.13.2, 608.16.2 1015 — 09 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies ................. Table 608.1, 608.13.7 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ...................... 424.3, 424.4, 607.4, 613.1 1017 — 2009 ‡ Performance Requirements for Temperature Actuated Mixing Valves for Hot Water D istribution Systems ............................................................................... 501.2.3, 613.1 1018 — 2001(R2021) ‡ Performance Requirements for Trap Seal Primer Valves; Potable Water Supplied ................................................................................ 1002.4.1.1, 1002.4.1.2 1019 — 201 1(R2016) ‡ Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Au tomatic Draining Type ............................................................................ Table 608.1, 608.13.6, 1020 — 04 Performance Requirements for Pressure Vacuum Breaker Assembly ............... Table 608.1, 608.13.5 1022 — 03 Performance Requirements for Backflow Preventer for Beverage Dispensing Equipment ................................................................ Table 608.1, 608.16.1, 60 8.16.10 1024 — 04 Performance Requirements for Dual Check Valve Type Backflow Preventers (for Residential Supply Service or Individual Outlets) ............................... Table 608.1, 608.13.10 1035 — 08 Performance Requirements for Laboratory Faucet Backflow Preventers .......... Table 608.1, 60 8.13.6 1037 — 90 Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ............... 425.2 1047 — 2009 Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies .................................................................................................... Table 608.1, 608.13.2 REFERENCED STANDARDS ASSE— continued 1048 — 2009 Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies .................................................................................. Table 608.1, 608.13.7 1052 — 04 Performance Requirements for Hose Connection Backflow Preventers ............ Table 608.1, 608.13.6 1055 — 2009 Performance Requirements for Chemical Dispensing Systems .............................................. 608.13.9 1056 — 201 3 ‡ Performance Requirements for Spill Resistant Vacuum Breaker Assemblies... ....................................................... Table 608.1, 608.13.5, 608.13.8 1060 — 2006 Performance Requirements for Outdoor Enclosures for Fluid Conveying Components ........ 608.14.1 1061 — 201 5 ‡ Performance Requirements for Push Fit Fittings ‡ ............................................. Table 605.5, 605.14.4 1062 — 2006 Performance Requirements for Temperature Actuated, Flow Reduction Valves to Individual Supply Fittings .......................................................................................................... 424.7 1066 — 1997 ‡ Performance Re quirements for Individual Pressure Balancing In - line Valves for Individual Fixture Fittings ..................................................................................................... 604.11 1069 — 05 Performance Requirements for Automatic Temperature Control Mixing Valves ...................... 424.4 1070 — 04 Performance Requirements for Water - temperature Limiting De vices ....................................... 408.3, 416.5, 423.3, 424.5, 607.1.2 1079 — 2005 Performance Requirements for Dielectric Pipe Unions .......................................... 605.24.1, 605.24.3 5013 — 2009 Performance Requirements for Testing Reduced Pressure Principle Backflow Prevention Assembly (RPA) and Reduced Pressure Fire Protection Backflow Preventers (RFP) ....................................................................... 312.10.2 5015 — 2009 Performance Requirements for Testing Double Check Valve Backflow Prevention Assemblies (DC) and Double Check Fire Protection Backflow Prevention Assemblies (DCF) ................................................... 312.10.2 5020 — 2009 Performance Requirements for Testing Pressure Vacuum Breaker Assemblies (PVBA) ....... 312.10.2 5047 — 98 Performance Requirements for Testing Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies (RPDA) ......................................................................................... 312.10.2 5048 — 2009 Performance R equirements for Testing Double Check Valve Detector Assembly (DCDA) .................................................................................... 312.10.2 5052 — 98 Performance Requirements for Testing Hose Connection Backflow Preventers .................... 312.10.2 5056 — 98 Performance Requirements for Testing Spill Resistant Vacuum Breaker (SRVB) ................ 312 .10.2 ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 - 2959 Standard Referenced reference in code number Title section number A 53/A 53M — 12 Specification for Pipe, Steel, Black and Hot - dipped, Zinc - coated Welded and Seamless .................................................... Table 702.1, Table 702.3, Table 1102.4 A 74 — 13A Specification for Cast - iron Soil Pipe and Fittings ........................................................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, 708.1.6, Table 1102.4, Table 1102.5, Table 1102.7 A 123 — 12 Standard Specification for Zinc (Hot - Dip Galvanized) Coatings on Iron and Steel Products .......................................................................... Table 702.3, Table 1102.4 A 153/A 153M —1 6a Specifications for Zinc Coating (Hot Dip) on Iron and Steel Hardware ..... Table 702.4, Table 1102.7 A 312/A 312M — 13a Specification for Seamless, Welded, And Heavily Cold Worked Austenitic Stainless Steel Pipes .................................. Table 605.4, Table 605.4.1, Table 605.5, Tabl e 1301.6 REFERENCED STANDARDS ASTM — continued A 403/A 403M — 11 Specification for Wrought Austenitic Stainless Steel Piping Fittings ........... Table 605.5, Table 605.8 A 518/A 518M — 99 (2012) Standard Specification for Corrosion - Resistant High - Silicon Iron Castings .................. Table 803.3.1 A 778 — 01(20 09)e1 Specification for Welded Unannealed Austenitic Stainless Steel Tubular Products .............................. Table 605.4, Table 605.4.1, Table 605.5, Table 1301.6 A 861 — 04 (2017) Standard Specification for High - Silicon Iron Pipe and Fittings ................................ ... Table 803.3.2 A 888 — 13A Specifica tion for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Application ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 B 32 — 08 Specification for Solder Metal ................................ ................................ .... 605.14.6, 705.6.3, 705.7.3 B 42 — 10 Specification for Seamless Copper Pipe, Standard Sizes .......................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 43 — 09 Specification for Seamless Red Brass Pipe, Standard Sizes ..................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 62 — 17 Specification for Composition Bronze or Ounce Metal Castings ................................ ................................ . Table 605.5, Table 702.4, Table 1102.7 B 75 — 11 Specification for Seamless Copper Tube ......................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 88 — 09 Specification for Seamless Copper Water Tube ................................ ................ Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Ta ble 1301.6, Figure E103.3(2), Figure E103.3(3) B 152/B 152M — 13 Specification for Copper Sheet, Strip Plate and Rolled Bar .............. 402.3, 417.5.2.4, 425.3.3, 902.2 B 2 51 — 10 Specification for General Requirements for Wrought Seamless Copper and Copper - alloy Tube ................................ ................................ .... Table 605.3, Table 605.4, Table 605.4.1, Table 702.1, Table 702.2, Table 702.3, Table 1102.4, Table 1102.7, Table 1301.6 B 302 — 12 Specification for Threadless Copper Pipe, Standard Sizes ....................... Table 605.4, Table 605.4.1, Table 702.1, Table 1301.6 B 447 — 12a Specification for Welded Copper Tube .............................. Table 605.4, Table 605.4.1, Table 1301.6 B 687 — (2011) Specification for Brass, Copper and Chromium - plated Pipe Nipples ................................ Table 605.8 B 813 — 10 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube ................................ ......... 605.14.6, 705.6.3, 705.7.3 B 828 — 02(2010) Practice for Making Capillary Joints by Soldering of Copper and Copp er Alloy Tube and Fittings ................................ ............................. 605.14.6, 705.6.3, 705.7.3 C 4 — 04(2009) Specification for Clay Drain Tile and Perforated Clay Drain Tile ................................ ............................... Table 702.3, Table 1102.4, Table 1102.5 C 14 — 11 Specification for Nonreinforced Concrete Sewer, Storm Drain and Culver t Pipe ................................ ................................ ........................... Table 702.3, Table 1102.4 C 76 — 13a Specification for Reinforced Concrete Culvert, Storm Drain and Sewer Pipe ................................ ................................ ............................. Table 702.3, Table 1102.4 REFERENCED STANDARDS ASTM — continued C 425 — 04(2009) Specification for Compression Joints for Vitrified Clay Pipe and Fittings ................................ ................................ ... Table702.4, 705.12, 705.16, Table 1102.7 C 443 — 12 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets ......... 705.5, 705.16 C 564 — 12 Specification for Rubber Gas kets for Cast - iron Soil Pipe and Fittings .......... 705.4.2, 705.4.3, 705.16 C 654 — 15 Standard Specification for Porous Concrete Pipe ................................ ............................ Table 1102.5 C 700 — 13 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5 C 1053 — 00 (2010) Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications ................................ ............. Table 803.3.1, Table 803.3.2 C 1173 — 10e1 Specification for Flexible Transition Couplings for Und erground Piping System .......................... 705.2.1, 705.5, 705.11.1, 705.12, 705.13.2, 705.16, C 1277 — 12 Specification for Shielded Coupling Joining Hubless Cast - iron Soil Pipe and Fittings ............ 705.4.3 C 1440 — 08 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ................ 705.16 C 1460 — 08 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground ................................ ............................... 705.16 C 1461 — 08 Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste and Vent (DWV) Sewer, Sanitary and Storm Plumbing Systems for Above and Below Ground Use .......................... 705.16 C 154 0 — 11 Specification for Heavy Duty Shielded Couplings Joining Hubless Cast - iron Soil Pipe and Fittings ................................ ................................ .............. 705.4.3 C 1563 — 13 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent and Storm Piping Applications ................................ ................................ ........ 705.4.2 D 1586 — 11 Standard Test Method for Standard Penetration Test (SPT) and Split - barrel Sampling of Soils ................................ ................................ ..................... 1114.2.1 D 1587 — 15 Standard Practice for Thin - walled Tube Sampling of Soils for Geotechnical Purpose s ......... 1114.2.1 D 2235 — 04(2011) Specification for Solvent Cement for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipe and Fittings ................................ ................................ ................................ ....... 705.2.2 D 2464 — 15 Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ................................ ................................ ............... Table 1102.7 D 2466 — 17 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 ......... Table 1102.7 D 2467 — 15 Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 ......... Table 1102.7 D 2564 — 12 Specification for Solvent Cements for P oly (Vinyl Chloride) (PVC) Plastic Piping Systems ................................ ................................ ................................ ....... 705.11.2 D 2657 — 07 Practice for Heat Fusion - joining of Polyolefin Pipe and Fitting Waste, and Vent Pipe and Fittings ................................ ................... 705.13.1, Table 1102.7 D 2661 — 11 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ...................... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 D 2665 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ................ Table 702.1, Table 702.2, Table 702.3, Table 702.4, . Table 1102.4, Table 1102.7, Table 1403.2.1 D 2729 — 11 Specification for Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........ Table 1102.5, Table 1403.2 D 2751 — 05 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Sewer Pipe and Fittings ................................ ................................ .......... Table 702.4, Table 1102.7 D 2846 – 09be1 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems ................................ ................................ ................ Table 1301.6 REFERENCED STANDARDS ASTM — continued D 2855 — 96 (2010) Standard Practice for Making Solvent - cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fitti ngs ................................ ................................ ................................ ................ 705.11.2 D 2949 — 10 Specification for 3.25 - in Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ........... Table 702.1, Table 702.4, Table 1403.2.1 D 3034 — 08 Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ................................ ................................ ........... Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7, Table 1403.2.1 D 3212 — 07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ................................ ......................... 705.2 .1, 705.11.1, 705.13.2 D 3311 — 11 Specification for Drain, Waste and Vent (DWV) Plastic Fittings Patterns ...................... Table 1102.7 D 3350 — 14 Specification for High Density Polyethylene Pipe (HPDE) ..................... Table 1102.4, Table 1102.7 D 4068 — 09 Specification for Chlorinated Polye thlene (CPE) Sheeting for Concealed Water - containment Membrane ................................ .................... 417.5.2.2 D 4551 — 12 Specification for Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water - containment Membrane ................................ ............... 417.5.2.1 F 405 — 05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings ................................ ........................ Table 1102.5, Table 1403.2, Table 1403.2.1 F 409 — 12 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ................................ ................................ .... 424.1.2 F 437 — 15 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 438 — 17 Specification for Socket - type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102. 7 F 439 — 13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 .............. Table 702.3, Table 702.4, Table 1102.4, Table 1102.7 F 477 — 10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ................................ ..... 705.16 F 628 — 08 Specification for Acrylonitrile - Butadiene - Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ......... Table 702.1, Table 702.4, 705.2.2, Table 1102.7 F 656 — 10 Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ................................ ................................ ................................ .... 705.11.2 F 891 — 10 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ................................ ......... Table 702.1 Table 702.2, Tab le 702.3, Table 1102.4, Table 1102.5 F 1412 — 09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage ................................ ................................ ... Table 702.2, Table 803.3.1, Table 803.3.2, 803.3.4.4.1, 803.3.4.5.1, Table 1102.7 F 1488 — 09e1 Specification for Coextruded Composite Pipe ....................... Table 702.1, Table 702.2, Table 1403.2 F 1673 — 10 Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems ........................ Table 803.3.1, Table 803.3.2, 803.3.4.6.1, Table 1102.7 F 1866 — 07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings ................................ ............. Table 702.4, Table 1102.7, Table 1403.2.1 F 2306/F 2306M — 13 12 '' to 60'' Annular Corrugated Profile - wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications ................................ ......................... Table 702.4, Table 1102.7 F 2389 — 10 Specification for Pressure - rated Polypropylene (PP) Piping Systems ................................ ........................... Table 1301.6, Table 1403.2, Table 1403.2.1 F 2618 — 15 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems ................................ ........................... Table 803.3.1, Table 803.3.2, 803.3.4.1.2 REFERENCED STANDARDS ASTM — continued F 2764 — 17e1 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe .................................................................... Table 1102.5 F 3219 — 17 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings ...................................................................Ta ble 1102.5 AWS American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166 Standard Referenced reference in code number Title section number A5.8 M/A5.8 — 2011 Specifications for Filler Metals for Brazing and Braze Welding ......................................... 605.11.1, 605.13.1, 605.14.1, 705.3.1, 705.6.1, 705.7.1, AWWA American Water Works Association 6666 West Quincy Avenue Denver, CO 80235 Standard Referenced reference in code number Title s ection number C110/A21.10 — 12 Ductile - iron and Gray - iron Fittings ....................................... Table 605.5, Table 702.4, Table 1102.7 C111/A21.11 — 12 Rubber - gasket Joints for Ductile - iron Pressure Pipe and Fittings ............................................. 605.12 C115/A21.15 — 11 Flanged Ductile - iron Pipe with Ductile - iron or Gray - iron Threaded Flanges ................................................................ . Table 605.4, Table 605.4.1 C151/A21.51 — 02 Standard for Ductile - iron Pipe, Centrifugally Cast for Water ........................................... Table 605.4, Table 605.4.1, Table 702.1, Table 702.2. Table 702. 3, Table 1102.4 C153 — 00/A21.53 — 11 Ductile - iron Compact Fittings for Water Service .............................................................. Table 605.5 C500 — 09 Standard for Metal - Seated Gate Valves for Water Supply Service ................................... Table 605.7 C504 — 10 Standard for Rubber - Seated Butterfly Valves ................................................................... Table 605.7 C507 — 11 Standard for Ball Valves, 6 In. Through 60 In .................................................................. Table 605.7 C510 — 07 Double Check Valve Backflow Prevention Assembly ...................................... Table 608.1, 608.13.7 C511 — 07 Reduced - pressure Principle Backflow Prevention Assembly ............ Table 608.1, 608.13.2, 608.16.2 C651 — 05 Disinfecting Wat er Mains ........................................................................................................... 610.1 C652 — 11 Disinfection of Water - storage Facilities ..................................................................................... 610.1 D100 – 2005 Standard for Welded Carbon Steel Tanks for Water Storage ............................... 1302.7.2, 1303.10.2 D115 – 2006 Standard for Tendon Prestressed - Concrete Water Tanks ..................................... 1302.7.2, 1303.10.2 D120 – 200 9 Standard for Thermosetting Fiberglass Reinforced Plastic Tanks ........................ 1302.7.2, 1303.10.2 CISPI Cast Iron Soil Pipe Institute 5959 Shallowford Road, Suite 419 Chattanooga, TN 37421 Standard Referenced reference in code number Title section number REFERENCED STANDARDS 301 — 04a Specification for Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications ............. Table 702.1, Table 702.2, Table 702.3, Table 702.4, Table 1102.4, Table 1102.5, Table 1102.7 310 — 11 Specification for Coupling for Use in Connection with Hubless Cast - iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications .................................. 308.5.1, 308.6.1, 705.4.3 CSA CSA Group 8501 East Pleasan t Valley Cleveland, OH 44131 - 5516 Standard Referenced reference in code number Title section number A257.1M — 2009 Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ............. Table 702.3, Table 1102.4 A257.2M — 2009 Reinforced Circular Concrete Culvert, Storm Drain, Sewer Pipe and Fittings ................................................................................................... Table 702.3, Table 1102.4 A257.3M — 2009 Joints for Circular Concrete Sewer and Culvert Pipe, Manhole Sections and Fittings Using Rubber Gaskets ............................................... 705.5, 705.16 ASME A112.3.4 — 2013/ CSA B45.9 — 2013 Macerating Systems and Related Components ......................................................................... 712.4.1 ASME A112.18.1 — 2012/ CSA B125.1 — 2012 Plumbing Supply Fittings ........... 424.1, 424.2, 424.3, 424.4, 424.6, 424.8, Table 605.7, 607.4, 608.2 ASME A112.18.2 — 2011/ CSA B125.2 — 2011 Plumbing Waste Fittings .......................................................................................................... 424.1.2 ASME A112.19.1 — 201 3/ CSA B45.2 — 2013 Enameled Cast - iron and Enameled Steel Plumbing Fixtures ........... 407.1, 410.1, 415.1, 416.1, 418.1 ASME A112.19.2 — 2013/ CSA B45.1 — 2013 Ceramic Plumbing Fixtures ...................... 401.2, 405.9, 407.1, 408.1, 410.1, 415.1, 416.1, 417.1, 418.1, 419.1, 420.1 ASME A112.19.3 — 2008/ CSA B45.4 — 08(R2013) Stainless - steel Plumbing Fixtures ......................................... 405.9, 407.1, 415.1, 416.1, 418.1, 420.1 ASME A112.19.5 — 2011/ CSA B45.15 — 2011 Flush Valves and Spuds for Water - closets, Urinals and Tanks .................................................. 425.4 ASME A112.19.7 — 2012/ CSA B45.10 — 2012 Hydromassage Bathtub Systems ...................................................................................... 421.1, 421.4 ASSE 1016/ ASME A112.1016/ CSA B125.16 — 2011 Performance Requirements for Individual Thermostatic, Pressure Balancing and Combination Control Valves for Individual Fixture Fittings ............................ 424.3, 424.4, 607.4 CSA B45.5 — 11/ IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 B64.1.1 — 11 Vacuum Breakers, Atmospheric Type (AVB) ..................... 425.2, Table 608.1, 608.13.6, 608.16.4.1 B64.1.2 — 11 Pressure Vacuum Breakers, (PVB) .................................................................... Table 608.1, 608.13.5 REFERENCED STANDARDS CSA — continued B64.1.3 — 11 Spill Resistant Pressure Vacuum Breaks (SRPVB) ................................................................ 608.13.8 B64.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) ......................................... Table 608.1, 608.13.6 B64.2.1 — 11 Vacuum Breakers, Hose Connection (HCVB) with Manual Draining Feature .............................................................................. Table 608.1, 608.13.6 B64.2.1.1 — 11 Hose Connection Dual Check Vacuum Breakers, (HCDVB) ............................ Table 608.1, 608.13.6 B64.2.2 — 11 Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature .......................................................................... Table 608.1, 608.13.6 B64.3 — 11 Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP) ............................................................ Table 608.1, 608.13.3, 608.16.2 B64.4 — 11 Backflow Preventers, Reduced Pressure Principle Type (RP) ........................... Table 608.1, 608.13.2 B64.4.1 — 11 Reduced Pressure Principle for Fire Sprinklers (RPF) ...................................... Table 608.1, 608.13.2 B64.5 —11 Double Check Backflow Preventers (DCVA) ................................................... Table 608.1, 608.13.7 B64.5.1 — 11 Double Check Valve Backflow Preventer for Fire Systems (DCVAF) .............. Table 608.1 608.13.7 B64.6 — 11 Dual Check Backflow Preventers Valve (DuC) ............................................. Table 608.1, 608.13.10 B64.7 — 11 Laboratory Faucet Vacuum Breakers (LFVB) .................................................. Table 608.1, 608.13.6 B64.10 — 11 Manual for the Selection and Installation of Backflow Prevention Devices ........................... 312.10.2 B64.10.1 — 11 Maintenance and Field Testing of Backflow Preventers ........................................................ 312.10.2 B79— 08(R2013) Commercial a nd Residential Drains, and Cleanouts ................................................................... 412.1 B125.3 — 2012 Plumbing Fittings ......................................... 408.3, 423.3, 424.4, 424.5, 425.2, 425.3.1, Table 605.7 B137.2 — 02 PVC Injection - Moulded Gasketed Fittings for Pressure Applications ............................ Table 1102.7 B137.3 — 13 Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications ....................................... 705.11.2 B181.1 — 11 Acrylonitrile - butadiene - styrene ABS Drain, Waste and Vent Pipe and Pipe Fittings ...................... Table 702.1, Table 702.4, 705.2.2, 715.2, Table 1102.7 B181.2 — 11 Polyvinylchloride PVC and chlorinated polyvinylchlo ride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings .............................. Table 702.1 Table 702.2, Table 702.3, 705.11.2, 715.2, Table 1102.4 B181.3 — 11 Polyolefin and P olyvinylidene Fluoride (PVDF) Laboratory Drainage Systems ........ Table 803.3.1, Table 803.3.2, 803.3.4.4.1, Table 1102.7 B182.1 — 11 Plastic Drain and Sewer Pipe and Pipe Fittings ............................................. 705.11.2, Table 1102.5 B18 2.2 — 11 PSM Type Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.4 — 11 Profile Polyvinylchloride PVC Sewer Pipe and Fittings ............................................................................ Table 702.3, Table 1102.4, Table 1102.5 B182.6 — 11 Profile Polyethylene (PE) Sewer Pi pe and Fittings for Leak - proof Sewer Applications .................................................................................. Table 1102.5 B182.8 — 11 P rofile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings ......................... Table 1102.5 B356 — 10 Water Pressure Reducing Valves for Domestic Water Systems ................................................. 604.8 B483.1 — 2007(R2012) ‡ Drinking Water Treatment Units ...................................................................................... 611.1, 611.2 B602 — 10 Mechanical Couplings for Drain, Waste and Vent Pipe and Sewer Pipe .................. 705.2.1, 705.4.3, 705.5, 705.11.1, 705.12, 705.13.2, 705.16 IAPMO IAPMO Group 4755 E. Philadelphia Ontario, CA 91761 Standard Referenced reference in code number Title section number PS 117 — 08 Copper and Copper Allow Tubing System Incorporating Press - type or Nail - type Connections ...................................................................................................... 605.14.4 CSA B45.5 — 11/ REFERENCED STANDARDS IAPMO Z124 - 2011 Plastic Plumbing Fixtures ............................... 407.1, 415.1, 416.1, 416.2, 417.1, 418.1, 419.1, 420.1 ICC International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001 Standard Referenced reference in code number Title section number A117.1 — 2009 Ac cessible and Usable Buildings and Facilities ............................................................... 404.2, 410.1 ISEA International Safety Equipment Association 1901 N. Moore Street, Suite 808 Arlington, VA 22209 Standard Referenced reference in code number Title section number ANSI/ISEA Z358.1 — 2009 Emerge ncy Eyewash and Shower Equipment ............................................................................ 411.1 MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park St. NE Vienna, VA 22180 - 4602 Standard Referenced reference in code number Title section number SP - 67 — 2011 Butterfly Valve s ................................................................................................................ Table 605.7 SP - 70 — 2011 Gray Iron Gate Valves, Flanged and Threaded Ends ......................................................... Table 605.7 SP - 71 — 2011 Gray Iron Swing Check Valves, Flanged and Threaded Ends ........................................... Table 605.7 SP - 72 — 2010 Ball Valves with Flanged or Butt - Welding Ends for General Service ............................... Table 605.7 SP - 78 — 2011 Cast Iron Plug Valves, Flanged and Threaded Ends .......................................................... Table 605.7 SP - 80 — 2008 Bronze Gate, Globe, Angle and Check Valves .................................................................. Table 605.7 SP - 110 — 2010 Ball Valves, Threaded, Socket Welded, Solder Joint, Grooved and Flared Ends .............. Table 605.7 NFPA Nation al Fire Protection Association 1 Batterymarch Park Quincy, MA 02169 - 7471 Standard Referenced reference in code number Title section number 51 — 13 Design and Installation of Oxygen - fuel Gas Systems for Welding, Cutting and Allied Processes ....................................................................................................... 1201.1, 1203.1 55 — 13 Compressed Gases and Cryogenic Fluids Code ........................................................... 1201.1, 1203.1 99 — 15 Health Care Facilities Code .......................................................................................... 1201.1, 1202.1 REFERENCED STANDARDS NSF NSF International 789 Dixboro Road Ann Arbor, MI 48105 Standard Referenced reference in code number Title section number 3— 2010 Commercial Warewashing Equipment ....................................................................................... 409.1 14 — 2011 Plastic Piping System Components and Related Materials ............................................... 303.3, 611.3 18 — 2012 Manual Food and Beverage Dispensing Equipment ................................................................... 426.1 42 — 2011 Drinking Water Treatment Units - Aesthetic Effects .......................................................... 611.1, 611.3 44 — 2012 Res idential Cation Exchange Water Softeners ................................................................ . 611.1, 611.3 53 — 2011a Drinking Water Treatment Units — Health Effects ........................................................... 611.1, 611.3 58 — 2012 Reverse Osmosis Drinking Water Treatment Systems ..................................................... 611.2, 611.3 61 — 2012 Drinking Water System Components — Health Effects ............... 410.1, 4 24.1, 605.4, 605.4.1, 605.5, 605.7, 606.5.4.2, 611.3 62 — 2012 Drinking Water Distillation Systems .......................................................................................... 611.1 372 — 2010 Drinking Water Systems Components — Lead Content .............................................................. 605.2 PDI Plumbing and Drainage Institute 800 Turnpike Street, Suite 300 North Andover, MA 01845 Standard Referenced reference in code number Title section number G101 (2012) Testing and Rating Procedure for Grease Interceptors with Appendix of Sizing and Ins tallation Data .......................................................................... 1003.3.4 UL UL LLC 333 Pfingsten Road Northbrook, IL 60062 - 2096 Standard Referenced reference in code number Title section number 58 – 1996 Steel Underground Tanks for Flammable and Combustible Liquids - with revisions through July 27, 1998 ....................................................................................... 1302.7.2, 1303.10.2 142 – 2006 Steel Aboveground Tanks for Flammable and Combustible Liquids - with revisions through February 12, 2010 ............................................................................................ 1302.7.2, 1303.10.2 1 74 — 2004 Household Electric Storage Tank Water Heaters — with revisions through September 2012 ..... 502.1 430 — 2009 Waste Disposers — with revisions through March 23, 2011 ........................................................ 413.1 732 — 1995 Oil - fired Storage Tank Water Heaters — with revisions through April 2010 .............................. 502.1 921 — 2004 Integral Gas Fired Heating Commercial Dishwashers ................................................................ 409.1 1316 – 1994 Glass - Fiber Reinforced Plastic Underground Storage Tanks for Petrolium Products, Alcohols and Alcohol Gasoline Mixtures - with revisions through May 12, 2006 ............................................................... 1302.7.2, 1303.10.2 1453 — 2004 Electric Booster and Commercial Storage Tank Water Heaters — with revisions through July 2011 ........................................................................................... 502.1 1746 – 2007 External Corrosion Protection Systems for Steel Underground Storage Tanks .... 1302.7.2, 1303.10.2 1795 — 2009 Hydromassage Bathtubs including revisions through August 23, 2011 ..................................... 421.1 REFERENCED STANDARDS WaterSense WaterSense US Environmental Protection Agency Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, N.W. Washington, D.C. 20460 Standard Referenced reference in code number Title section number v.1.0 — October 1, 2007 High - efficiency Lavatory Faucet Specifications ...................................................................... 604.4.1 v.1.0 — October 8, 2009 WaterSense Specification for Flushing Urinals ........................................................................ 604.4.1 v.1.0 — December 17, 2015 WaterSense Specification for Flushometer - Valve Water Closets ............................................. 604 .4.1 v.1.1 — July 26, 2018 WaterSense Specification for Showerheads ............................................................................. 604.4.1 v.1.2 — June 2, 2014 WaterSense Specification for Tank - Type Toilets ..................................................................... 604.4.1