"""The design test's scene: a design file printed and photographed in the size table's everyday scene, beside its plain twin (the same content, version, error correction and mask, with a 4-square margin). Each capture is a 1920 x 1440 grey JPEG of the printed sheet in a scene; design_frames.py shrinks it to the 1280 x 960 frame the scanners read. Its code gets `ppm` camera pixels per square in the 1280 frame, head-on at the code's centre, before the 15-degree tilt. A seed is one scene for a design and its twin at every size, and seed_captures renders what the two share at a seed once, with the same bytes as rendering each on its own. The everyday scene: tilt 15 degrees, focus blur 0.7 px, a 2 px shake streak, ink 47 on paper 202 (61% contrast), uneven light 0.15, noise 4 and JPEG quality 82, with pixel figures quoted at the 1280 frame. """ from __future__ import annotations import hashlib import math import random import cv2 import numpy as np import zxingcpp FRAME_W, FRAME_H = 1920, 1440 # the capture K = FRAME_W / 1280 # pixels per square and blur are quoted at the 1280 frame TEX = 12 # sheet texels per square FOCAL = FRAME_W * 0.8 # pinhole focal length in pixels (about 64 degrees across) MARGIN = 6 # squares of sheet shown round the code; anything of the design further out is cut QUIET = 4 # the twin's margin, in squares SUPER = 2 # the file is sampled on a grid this much finer than the sheet, then averaged SNAP = 1e-4 # coverage this close to 0 or 1 is 0 or 1 SCENE = {"tilt": 15.0, "blur": 0.7, "motion": 2.0, "ink": 47.0, "paper": 202.0, "gradient": 0.15, "noise": 4.0, "jpeg": 82} SEEDS = "grid:everyday" # the size table's own scene streams, so a seed is one of its measured scenes QR = zxingcpp.BarcodeFormat.QRCode DROPPED = (zxingcpp.BarcodeFormat.MicroQRCode, zxingcpp.BarcodeFormat.RMQRCode) W, H = FRAME_W, FRAME_H YY, XX = np.mgrid[0:H, 0:W].astype(np.float32) # made once per process # ---- the design file --------------------------------------------------------------------------------------------- def open_design(src): """(luma float32 0..255, grey uint8) of a file, by its path or its bytes: BT.601 luma on the sRGB values, any transparent part on white. Both reads take the pixels as stored: IMREAD_UNCHANGED ignores EXIF orientation, and the grey read is told to, so the luma and the corners describe the same pixels.""" def read(flags): if isinstance(src, bytes | bytearray): return cv2.imdecode(np.frombuffer(src, np.uint8), flags) return cv2.imread(str(src), flags) im = read(cv2.IMREAD_UNCHANGED) if im is None: raise ValueError("cannot open the picture") top = float(np.iinfo(im.dtype).max) x = im.astype(np.float32) * np.float32(255.0 / top) if x.ndim == 2: lum = x else: bgr = x[..., :3] if x.shape[2] >= 3 else np.repeat(x[..., :1], 3, axis=2) if x.shape[2] == 4: a = x[..., 3:] / np.float32(255.0) bgr = bgr * a + np.float32(255.0) * (1 - a) lum = np.float32(0.114) * bgr[..., 0] + np.float32(0.587) * bgr[..., 1] + np.float32(0.299) * bgr[..., 2] gray = read(cv2.IMREAD_GRAYSCALE | cv2.IMREAD_IGNORE_ORIENTATION) if im.ndim == 3 and im.shape[2] == 4 and im[..., 3].min() < top: gray = np.rint(lum).astype(np.uint8) return lum.astype(np.float32), gray def facts_of(r): x, pos, raw = (r.extra or {}), r.position, bytes(r.bytes) return {"text": r.text, "bytes": raw, "binary": r.content_type == zxingcpp.ContentType.Binary, "version": int(x["Version"]), "ec": str(x["ECLevel"]), "mask": int(x["DataMask"]), "uec": x.get("UEC"), "sha256": hashlib.sha256(raw).hexdigest(), "corners": [[float(q.x), float(q.y)] for q in (pos.top_left, pos.top_right, pos.bottom_right, pos.bottom_left)]} def qr_reads(gray, **how): """zxing-cpp's reads at library defaults (QR only), or with the options how (design_rules._own: try_downscale off): valid, and each with its version, error correction and mask.""" rs = [r for r in zxingcpp.read_barcodes(gray, formats=QR, **how) if r.format not in DROPPED and r.valid] return [r for r in rs if (r.extra or {}).get("DataMask") is not None and (r.extra or {}).get("ECLevel") and (r.extra or {}).get("Version")] def same_code(r): """What copies of one code share: the content, version, error correction and mask.""" x = r.extra return bytes(r.bytes), int(x["Version"]), str(x["ECLevel"]), int(x["DataMask"]) def nearest(rs, shape): """Of several reads, the one nearest the picture's centre.""" h, w = shape[:2] def off(r): p = r.position c = np.mean([[q.x, q.y] for q in (p.top_left, p.top_right, p.bottom_right, p.bottom_left)], axis=0) return float(np.hypot(c[0] - w / 2, c[1] - h / 2)) return min(rs, key=off) def facts(gray): """zxing-cpp's read at library defaults (QR only): content, version, error correction, mask and corners (pixel edges). One code, or copies of one content (the copy nearest the picture's centre); None otherwise, or when the error correction or mask is unknown.""" rs = qr_reads(gray) if not rs or len({bytes(r.bytes) for r in rs}) != 1: return None return facts_of(nearest(rs, gray.shape)) def px_per_square(corners, version): c = np.float32(corners) return float(np.mean([np.linalg.norm(c[i] - c[(i + 1) % 4]) for i in range(4)])) / (17 + 4 * version) def twin_image(f, scale): """The plain twin at `scale` px per square with a 4-square margin, from the text (the bytes for binary content); raises if it can't be made or reads back differently.""" content = f["bytes"] if f["binary"] else f["text"] b = zxingcpp.create_barcode(content, QR, ec_level=f["ec"], version=f["version"], data_mask=f["mask"]) img = np.array(zxingcpp.write_barcode_to_image(b, scale=int(scale), add_quiet_zones=True)) back = facts(img) if back is None or any(back[k] != f[k] for k in ("version", "ec", "mask", "bytes")): raise ValueError("the twin reads back differently") return img # ---- onto the printed sheet -------------------------------------------------------------------------------------- def _shift(d): return np.array([[1, 0, d], [0, 1, d], [0, 0, 1]], np.float64) def place(L, corners, n, beyond="scene"): """The design's luma (0..1) and coverage on the sheet: t x t texels, TEX per square, the code's corners MARGIN squares from each edge. Each file pixel prints as a solid square, sampled by area. beyond="paper" puts blank paper beyond the file's edge (a check anchor); "scene" lets the scene show there.""" t = (n + 2 * MARGIN) * TEX c = np.float32(corners) k = px_per_square(corners, (n - 17) // 4) if k > TEX: w, h = max(1, round(L.shape[1] * TEX / k)), max(1, round(L.shape[0] * TEX / k)) sx, sy = w / L.shape[1], h / L.shape[0] L = cv2.resize(L, (w, h), interpolation=cv2.INTER_AREA) c = c * np.float32([sx, sy]) cover = np.ones(L.shape, np.float32) u0, u1 = MARGIN * TEX * SUPER, (MARGIN + n) * TEX * SUPER edge = cv2.getPerspectiveTransform(c, np.float32([[u0, u0], [u1, u0], [u1, u1], [u0, u1]])) hc = _shift(-0.5) @ edge @ _shift(0.5) ts = t * SUPER Lt = cv2.warpPerspective(L, hc, (ts, ts), flags=cv2.INTER_NEAREST, borderMode=cv2.BORDER_REPLICATE) cov = cv2.warpPerspective(cover, hc, (ts, ts), flags=cv2.INTER_NEAREST, borderMode=cv2.BORDER_CONSTANT, borderValue=0) if SUPER > 1: Lt = cv2.resize(Lt, (t, t), interpolation=cv2.INTER_AREA) cov = cv2.resize(cov, (t, t), interpolation=cv2.INTER_AREA) cov[cov > 1 - SNAP] = 1 cov[cov < SNAP] = 0 Lt = np.clip(Lt, 0, 1).astype(np.float32) if beyond == "paper": return Lt * cov + (1 - cov), np.ones_like(cov) return Lt, cov class Design: """A design (or twin) with its facts, placed once on the sheet.""" def __init__(self, lum, gray, f=None, beyond="scene"): self.lum, self.gray, self.beyond = lum.astype(np.float32), gray, beyond self.facts = f if f is not None else facts(gray) self._placed = None @classmethod def open(cls, path, beyond="scene"): lum, gray = open_design(path) return cls(lum, gray, beyond=beyond) def twin(self, scale=None): f = self.facts scale = scale or max(1, round(px_per_square(f["corners"], f["version"]))) img = twin_image(f, scale) return Design(img.astype(np.float32), img, beyond=self.beyond) @property def n(self): return 17 + 4 * self.facts["version"] def placed(self): if self._placed is None: self._placed = place(self.lum / np.float32(255.0), self.facts["corners"], self.n, self.beyond) return self._placed # ---- the scene --------------------------------------------------------------------------------------------------- def smooth_field(shape, rng, scale, amp): """A low-frequency random field, mean 0.""" h, w = shape small = np.array([[rng.gauss(0, 1) for _ in range(max(2, w // scale))] for _ in range(max(2, h // scale))], dtype=np.float32) return cv2.resize(small, (w, h), interpolation=cv2.INTER_CUBIC) * amp def project(points, tilt_deg, axis_deg, psi_deg, center): """Turn plane points by psi, tilt them about an in-plane axis, and project them through a pinhole.""" psi, phi, th = map(math.radians, (psi_deg, axis_deg, tilt_deg)) c, s = math.cos(psi), math.sin(psi) pts = np.array([[c * x - s * y, s * x + c * y, 0.0] for x, y in points]) ax = np.array([math.cos(phi), math.sin(phi), 0.0]) k = np.array([[0, -ax[2], ax[1]], [ax[2], 0, -ax[0]], [-ax[1], ax[0], 0]]) rot = np.eye(3) + math.sin(th) * k + (1 - math.cos(th)) * (k @ k) p3 = pts @ rot.T z = FOCAL + p3[:, 2] return np.stack([FOCAL * p3[:, 0] / z + center[0], FOCAL * p3[:, 1] / z + center[1]], 1).astype(np.float32) def streams(version, seed): """The scene's random streams for a version and seed: the turn and tilt axis, then the scene, the sheet's texture and the shake, each from its own string seed.""" name = f"{SEEDS}:{int(version)}:{int(seed)}" rng = random.Random(name) psi, axis = rng.uniform(0, 360), rng.uniform(0, 180) return rng, psi, axis, random.Random(f"{name}:texture"), random.Random(f"{name}:motion") def seed_captures(objs, seed, steps): """{(step index, object index): JPEG bytes} for objects of one version (a design and its twin) at one seed. What they share at the seed (the background, the sheet's paper, the shake and the noise) and at a step (the uneven light) is computed once.""" n = objs[0].n rng, psi, axis, trng, mrng = streams(objs[0].facts["version"], seed) t = objs[0].placed()[0].shape[0] paper = np.full((t, t), float(SCENE["paper"]), np.float32) paper += smooth_field((t, t), trng, 96, 4.0) + np.random.default_rng(trng.randrange(1 << 30)).normal( 0, 2.0, (t, t)) u1, u2 = rng.uniform(-0.5, 0.5), rng.uniform(-0.5, 0.5) back = rng.uniform(85, 135) + smooth_field((H, W), rng, 240, 14.0) for _ in range(rng.randrange(2, 6)): # a few soft-edged objects x0, y0 = rng.uniform(0, W), rng.uniform(0, H) cv2.rectangle(back, (int(x0), int(y0)), (int(x0 + rng.uniform(100, 600)), int(y0 + rng.uniform(80, 500))), rng.uniform(60, 180), -1) back = cv2.GaussianBlur(back, (0, 0), 3) beta = rng.uniform(0, 2 * math.pi) # uneven light length = max(1, int(round(SCENE["motion"] * K))) # shake kern = np.zeros((length, length), np.float32) kern[length // 2, :] = 1.0 / length rot = cv2.getRotationMatrix2D((length / 2 - 0.5, length / 2 - 0.5), mrng.uniform(0, 180), 1.0) kern = cv2.warpAffine(kern, rot, (length, length)) kern = kern / max(kern.sum(), 1e-6) nrng = np.random.default_rng(rng.randrange(1 << 30)) n1 = nrng.normal(0, 1.0 + SCENE["noise"], back.shape) n2 = nrng.normal(0, 1, back.shape) out = {} for si, ppm in enumerate(steps): mpx = ppm * K s = mpx / TEX half = t * s / 2 code_half = (n / 2 + 4) * mpx room_x = max(0.0, W / 2 - code_half * 1.4) room_y = max(0.0, H / 2 - code_half * 1.4) center = (W / 2 + u1 * room_x, H / 2 + u2 * room_y) dst = project([(-half, -half), (half, -half), (half, half), (-half, half)], SCENE["tilt"], axis, psi, center) hm = cv2.getPerspectiveTransform(np.float32([[0, 0], [t, 0], [t, t], [0, t]]), dst) code_w = n * mpx ramp = ((XX - center[0]) * math.cos(beta) + (YY - center[1]) * math.sin(beta)) / max(code_w, 1) light = 1 + SCENE["gradient"] * np.clip(ramp, -1.5, 1.5) / 1.5 for oi, obj in enumerate(objs): L, cov = obj.placed() tex = L * paper + (1 - L) * np.float32(SCENE["ink"]) # the sheet: L between ink and textured paper if s < 1: # optical anti-aliasing before the warp tex = cv2.GaussianBlur(tex, (0, 0), 0.42 / s) if cov.min() < 1: cov = np.clip(cv2.GaussianBlur(cov, (0, 0), 0.42 / s), 0, 1) full = back.copy() cv2.warpPerspective(tex, hm, (W, H), dst=full, flags=cv2.INTER_LINEAR, borderMode=cv2.BORDER_TRANSPARENT) a = np.zeros_like(back) cv2.warpPerspective(cov, hm, (W, H), dst=a, flags=cv2.INTER_LINEAR, borderMode=cv2.BORDER_TRANSPARENT) a[a > 1 - SNAP] = 1 a[a < SNAP] = 0 sc = back * (1 - a) + full * a sc *= light sc = cv2.GaussianBlur(sc, (0, 0), SCENE["blur"] * K) # focus sc = cv2.filter2D(sc, -1, kern) sc += n1 + n2 * np.sqrt(np.clip(sc, 0, 255)) * 0.15 img = np.clip(sc, 0, 255).astype(np.uint8) out[(si, oi)] = cv2.imencode(".jpg", img, [cv2.IMWRITE_JPEG_QUALITY, int(SCENE["jpeg"])])[1].tobytes() return out