Update app.py

app.py

@@ -36,11 +36,11 @@ def run_simulation(material_yield, part_thickness, press_force, punch_speed, saf
 iface = gr.Interface(
     fn=run_simulation,
     inputs=[
-        gr.Slider(minimum=100, maximum=500, default=200, label="Material Yield Strength (MPa)"),
-        gr.Slider(minimum=0.5, maximum=10.0, default=3.0, label="Part Thickness (mm)"),
-        gr.Slider(minimum=5000, maximum=20000, default=12000, label="Press Force (N)"),
-        gr.Slider(minimum=1, maximum=5, default=2, label="Punch Speed (m/s)"),
-        gr.Slider(minimum=1.0, maximum=3.0, default=1.5, label="Safety Factor"),
+        gr.Slider(minimum=100, maximum=500, value=200, label="Material Yield Strength (MPa)"),
+        gr.Slider(minimum=0.5, maximum=10.0, value=3.0, label="Part Thickness (mm)"),
+        gr.Slider(minimum=5000, maximum=20000, value=12000, label="Press Force (N)"),
+        gr.Slider(minimum=1, maximum=5, value=2, label="Punch Speed (m/s)"),
+        gr.Slider(minimum=1.0, maximum=3.0, value=1.5, label="Safety Factor"),
     ],
     outputs=[
         gr.Image(type="filepath", label="Stress Analysis Graph"),