Spaces:
Sleeping
Sleeping
| def generate_gcode(cad_file): | |
| """ | |
| Generates a simple G-Code and saves it to a file. | |
| Returns the file path of the generated G-Code file. | |
| """ | |
| try: | |
| # Ensure the output directory exists | |
| output_dir = "/mnt/data/" | |
| os.makedirs(output_dir, exist_ok=True) | |
| # Define the G-Code content | |
| gcode_content = """ | |
| G21 ; Set units to millimeters | |
| G17 ; Select XY plane | |
| G90 ; Absolute positioning | |
| G1 F1500 ; Set feed rate | |
| G0 Z5 ; Raise Z-axis to safe height | |
| G0 X0 Y0 ; Move to start position | |
| G1 Z-1 F300 ; Lower Z-axis to cutting depth | |
| G1 X10 Y0 ; Cut to the first corner | |
| G1 X10 Y10 ; Cut to the second corner | |
| G1 X0 Y10 ; Cut to the third corner | |
| G1 X0 Y0 ; Return to the start position | |
| G0 Z5 ; Raise Z-axis to safe height | |
| M30 ; End program | |
| """ | |
| # Save the G-Code to a file | |
| gcode_file = os.path.join(output_dir, "generated_gcode.nc") | |
| with open(gcode_file, "w") as f: | |
| f.write(gcode_content) | |
| return gcode_file | |
| except Exception as e: | |
| return f"Error in G-Code generation: {e}" | |