Delete app.py

app.py

@@ -1,88 +0,0 @@
-import numpy as np
-import matplotlib.pyplot as plt
-import streamlit as st
-
-# Define the calculation function
-def calculate_relay_curve(tr_kva, tr_volt, ct_pr, ct_sec, fac, tms, i_f_fac, curve):
-    # Calculate transformer current
-    tr_curr = round(tr_kva / (tr_volt * np.sqrt(3)), 3)
-    pick = round(fac * tr_curr / ct_pr, 3)  # Pickup value in multiples of In
-    i_f = round(i_f_fac * tr_curr * fac, 3)  # Fault current in amps
-
-    # Select curve coefficients based on relay type
-    if curve == 'IEC Normal Inverse':
-        b_ = 0.14
-        a_ = 0.02
-    elif curve == 'IEC Very Inverse':
-        b_ = 13.5
-        a_ = 1
-    elif curve == 'IEC Extremely Inverse':
-        b_ = 80
-        a_ = 2.0
-    elif curve == 'IEC Long Time Inverse':
-        b_ = 120
-        a_ = 1.0
-    else:
-        st.error("Invalid Curve Selected.")
-        return
-
-    # Calculate fault trip time
-    try:
-        fault_time = b_ * tms / (((i_f * (ct_sec / ct_pr) / (pick * ct_sec)) ** a_) - 1)
-    except ZeroDivisionError:
-        st.error("Error: Division by zero in fault trip time calculation. Check input values.")
-        return
-
-    # Generate data for the relay curve (current vs time)
-    x_curr = np.linspace(pick * ct_pr * 1.1, pick * ct_pr * 5, 500)
-    y_time = []
-    for x in x_curr:
-        try:
-            time = b_ * tms / (((x * (ct_sec / ct_pr) / (pick * ct_sec)) ** a_) - 1)
-            y_time.append(time if time > 0 else np.nan)  # Avoid negative/undefined times
-        except ZeroDivisionError:
-            y_time.append(np.nan)
-
-    # Display results
-    st.write('### Results:')
-    st.write(f'**Rated Current:** {tr_curr} A')
-    st.write(f'**Pickup:** {pick} x In')
-    st.write(f'**Fault Current:** {i_f} A')
-    st.write(f'**Trip Time:** {round(fault_time, 3)} sec')
-
-    # Plot the relay curve
-    fig, ax = plt.subplots(figsize=(10, 6))
-    ax.plot(x_curr, y_time, label="Relay Curve", color='blue')
-
-    # Mark the fault current and trip time on the graph
-    ax.axvline(x=i_f, color='red', linestyle='--', label=f"Fault Current: {i_f} A")
-    ax.axhline(y=fault_time, color='green', linestyle='--', label=f"Trip Time: {round(fault_time, 3)} sec")
-
-    # Adding labels and title
-    ax.set_xlabel('Current (Amp)')
-    ax.set_ylabel('Time (sec)')
-    ax.set_title(f"Relay Curve: {curve}")
-
-    # Adding a legend
-    ax.legend()
-
-    # Show the plot
-    st.pyplot(fig)
-
-# Streamlit app layout
-st.title("Relay Curve Calculator")
-st.sidebar.header("Input Parameters")
-
-# Input fields
-tr_kva = st.sidebar.number_input("Transformer Rating (kVA)", min_value=1.0, value=1000.0, step=1.0)
-tr_volt = st.sidebar.number_input("Transformer Voltage (V)", min_value=1.0, value=11000.0, step=1.0)
-ct_pr = st.sidebar.number_input("CT Primary (Amp)", min_value=1.0, value=200.0, step=1.0)
-ct_sec = st.sidebar.number_input("CT Secondary (Amp)", min_value=1.0, value=5.0, step=1.0)
-fac = st.sidebar.number_input("Fault Anticipation Factor", min_value=1.0, value=1.2, step=0.1)
-tms = st.sidebar.number_input("Time Multiplier Setting (TMS)", min_value=0.01, value=0.1, step=0.01)
-i_f_fac = st.sidebar.number_input("Fault Current Multiplier", min_value=1.0, value=10.0, step=0.1)
-curve = st.sidebar.selectbox("Relay Curve Type", ['IEC Normal Inverse', 'IEC Very Inverse', 'IEC Extremely Inverse', 'IEC Long Time Inverse'])
-
-# Run the calculation when the button is clicked
-if st.sidebar.button("Calculate"):
-    calculate_relay_curve(tr_kva, tr_volt, ct_pr, ct_sec, fac, tms, i_f_fac, curve)