app.py

import streamlit as st
import numpy as np
import matplotlib.pyplot as plt
from PIL import Image
from utils.beam_analysis import analyze_beam, plot_beam_diagrams

# Load the logo image
def load_logo():
    img = Image.open("assets/logo.png")
    st.image(img, width=100)

# Main Streamlit app
def main():
    # Display logo
    load_logo()
    st.title("Beam Analysis for Roof Design")

    st.write("""
    This app helps in analyzing two types of beam configurations for a basement roof design:
    1. **Statically Indeterminate** (Continuous Steel Beams over Interior Columns)
    2. **Statically Determinate** (Simply Supported Beams)

    Use the options below to select and analyze each beam configuration.
    """)

    # Select beam configuration
    beam_type = st.selectbox("Select Beam Configuration", ["Simply Supported Beams", "Continuous Beams"])
    length = 30  # Beam length in feet
    width = 50   # Beam width in feet (if needed)
    load = 1500  # Example uniform load in pounds (modify as per actual project specs)

    # Perform beam analysis
    if beam_type == "Simply Supported Beams":
        # Analysis for Simply Supported Beam
        st.subheader("Simply Supported Beam Analysis")
        results = analyze_beam(length, load, "simply_supported")
        st.write(f"Maximum Shear Force: {results['max_shear']} lb")
        st.write(f"Maximum Bending Moment: {results['max_bending_moment']} lb-ft")
        st.write(f"Deflection: {results['deflection']} inches")

    elif beam_type == "Continuous Beams":
        # Analysis for Continuous Beam
        st.subheader("Continuous Beam Analysis")
        results = analyze_beam(length, load, "continuous")
        st.write(f"Maximum Shear Force: {results['max_shear']} lb")
        st.write(f"Maximum Bending Moment: {results['max_bending_moment']} lb-ft")
        st.write(f"Deflection: {results['deflection']} inches")

    # Plot the diagrams (SFD, BMD)
    st.subheader("Shear Force and Bending Moment Diagrams")
    plot_beam_diagrams(beam_type, length, load)

if __name__ == "__main__":
    main()