Finished TXT2IMG v4.4

workflows/TXT2IMG/v4.4/TXT2IMG-ADetailer-v4.4-vslinx.json

@@ -1,7 +1,7 @@
 {
   "id": "29deeb6d-199b-453c-8c09-a02fe90cb55c",
   "revision": 0,
-  "last_node_id": 627,
+  "last_node_id": 630,
   "last_link_id": 14959,
   "nodes": [
     {
@@ -160,42 +160,6 @@
       "bgcolor": "#335",
       "shape": 1
     },
-    {
-      "id": 365,
-      "type": "Label (rgthree)",
-      "pos": [
-        -1140,
-        -410
-      ],
-      "size": [
-        308.20001220703125,
-        26
-      ],
-      "flags": {
-        "allow_interaction": false,
-        "pinned": true
-      },
-      "order": 3,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "Manual & Recommendations",
-      "properties": {
-        "fontSize": 24,
-        "fontFamily": "Arial",
-        "fontColor": "#ffffff",
-        "textAlign": "left",
-        "backgroundColor": "transparent",
-        "padding": 0,
-        "borderRadius": 0,
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "color": "#fff0",
-      "bgcolor": "#fff0"
-    },
     {
       "id": 363,
       "type": "Label (rgthree)",
@@ -205,13 +169,13 @@
       ],
       "size": [
         149.43333435058594,
-        26
+        24
       ],
       "flags": {
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 4,
+      "order": 3,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -247,7 +211,7 @@
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 5,
+      "order": 4,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -282,7 +246,7 @@
       "flags": {
         "pinned": true
       },
-      "order": 6,
+      "order": 5,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -315,7 +279,7 @@
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 7,
+      "order": 6,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -344,14 +308,14 @@
         -330
       ],
       "size": [
-        140,
-        26
+        60.650001525878906,
+        14
       ],
       "flags": {
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 8,
+      "order": 7,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -386,7 +350,7 @@
       "flags": {
         "pinned": true
       },
-      "order": 9,
+      "order": 8,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -418,7 +382,7 @@
       "flags": {
         "pinned": true
       },
-      "order": 10,
+      "order": 9,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -436,42 +400,6 @@
       "bgcolor": "#000",
       "shape": 1
     },
-    {
-      "id": 366,
-      "type": "Label (rgthree)",
-      "pos": [
-        -1140,
-        -400
-      ],
-      "size": [
-        360.45001220703125,
-        26
-      ],
-      "flags": {
-        "allow_interaction": false,
-        "pinned": true
-      },
-      "order": 11,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "___________________________",
-      "properties": {
-        "fontSize": 24,
-        "fontFamily": "Arial",
-        "fontColor": "#ffffff",
-        "textAlign": "left",
-        "backgroundColor": "transparent",
-        "padding": 0,
-        "borderRadius": 0,
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "color": "#fff0",
-      "bgcolor": "#fff0"
-    },
     {
       "id": 195,
       "type": "CLIPTextEncode",
@@ -484,7 +412,7 @@
         110
       ],
       "flags": {},
-      "order": 12,
+      "order": 10,
       "mode": 4,
       "inputs": [
         {
@@ -532,7 +460,7 @@
         110
       ],
       "flags": {},
-      "order": 13,
+      "order": 11,
       "mode": 4,
       "inputs": [
         {
@@ -580,7 +508,7 @@
         110
       ],
       "flags": {},
-      "order": 14,
+      "order": 12,
       "mode": 4,
       "inputs": [
         {
@@ -630,7 +558,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 15,
+      "order": 13,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -680,7 +608,7 @@
         110
       ],
       "flags": {},
-      "order": 16,
+      "order": 14,
       "mode": 4,
       "inputs": [
         {
@@ -728,7 +656,7 @@
         110
       ],
       "flags": {},
-      "order": 17,
+      "order": 15,
       "mode": 4,
       "inputs": [
         {
@@ -778,7 +706,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 18,
+      "order": 16,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -828,7 +756,7 @@
         30
       ],
       "flags": {},
-      "order": 19,
+      "order": 17,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -879,7 +807,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 20,
+      "order": 18,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -929,7 +857,7 @@
         30
       ],
       "flags": {},
-      "order": 21,
+      "order": 19,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -978,7 +906,7 @@
         30
       ],
       "flags": {},
-      "order": 22,
+      "order": 20,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1027,7 +955,7 @@
         30
       ],
       "flags": {},
-      "order": 23,
+      "order": 21,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1064,55 +992,6 @@
       "bgcolor": "#653",
       "shape": 1
     },
-    {
-      "id": 299,
-      "type": "mxSlider",
-      "pos": [
-        -510,
-        590
-      ],
-      "size": [
-        240,
-        30
-      ],
-      "flags": {},
-      "order": 24,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [
-        {
-          "name": "",
-          "type": "FLOAT",
-          "links": [
-            553
-          ]
-        }
-      ],
-      "title": "ControlNet End Percent",
-      "properties": {
-        "cnr_id": "comfyui-mxtoolkit",
-        "ver": "0a3857ada2c1780188b9d5abb95f9f3e6561d976",
-        "Node name for S&R": "mxSlider",
-        "value": 1,
-        "min": 0,
-        "max": 1,
-        "step": 0.001,
-        "decimals": 3,
-        "snap": true,
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        1,
-        1,
-        1
-      ],
-      "color": "#432",
-      "bgcolor": "#653",
-      "shape": 1
-    },
     {
       "id": 364,
       "type": "Label (rgthree)",
@@ -1122,13 +1001,13 @@
       ],
       "size": [
         801,
-        26
+        24
       ],
       "flags": {
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 25,
+      "order": 22,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -1163,7 +1042,7 @@
       "flags": {
         "pinned": true
       },
-      "order": 26,
+      "order": 23,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -1195,7 +1074,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 27,
+      "order": 24,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1245,7 +1124,7 @@
         90
       ],
       "flags": {},
-      "order": 28,
+      "order": 25,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1303,7 +1182,7 @@
         90
       ],
       "flags": {},
-      "order": 29,
+      "order": 26,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1354,7 +1233,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 97,
+      "order": 98,
       "mode": 0,
       "inputs": [
         {
@@ -1405,7 +1284,7 @@
         58
       ],
       "flags": {},
-      "order": 30,
+      "order": 27,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1447,7 +1326,7 @@
         30
       ],
       "flags": {},
-      "order": 31,
+      "order": 28,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1499,7 +1378,7 @@
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 32,
+      "order": 29,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -1532,7 +1411,7 @@
         30
       ],
       "flags": {},
-      "order": 33,
+      "order": 30,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1581,7 +1460,7 @@
         30
       ],
       "flags": {},
-      "order": 34,
+      "order": 31,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1630,7 +1509,7 @@
         110
       ],
       "flags": {},
-      "order": 35,
+      "order": 32,
       "mode": 4,
       "inputs": [
         {
@@ -1678,7 +1557,7 @@
         110
       ],
       "flags": {},
-      "order": 36,
+      "order": 33,
       "mode": 4,
       "inputs": [
         {
@@ -1728,7 +1607,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 37,
+      "order": 34,
       "mode": 4,
       "inputs": [
         {
@@ -1776,7 +1655,7 @@
         30
       ],
       "flags": {},
-      "order": 38,
+      "order": 35,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1825,7 +1704,7 @@
         30
       ],
       "flags": {},
-      "order": 39,
+      "order": 36,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1874,7 +1753,7 @@
         30
       ],
       "flags": {},
-      "order": 40,
+      "order": 37,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1923,7 +1802,7 @@
         350
       ],
       "flags": {},
-      "order": 41,
+      "order": 38,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -1970,7 +1849,7 @@
         350
       ],
       "flags": {},
-      "order": 42,
+      "order": 39,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -2017,7 +1896,7 @@
         130
       ],
       "flags": {},
-      "order": 43,
+      "order": 40,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -2059,7 +1938,7 @@
         130
       ],
       "flags": {},
-      "order": 44,
+      "order": 41,
       "mode": 4,
       "inputs": [],
       "outputs": [
@@ -2101,7 +1980,7 @@
         230
       ],
       "flags": {},
-      "order": 45,
+      "order": 42,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -2143,7 +2022,7 @@
         890
       ],
       "flags": {},
-      "order": 130,
+      "order": 131,
       "mode": 0,
       "inputs": [
         {
@@ -2178,7 +2057,7 @@
         200
       ],
       "flags": {},
-      "order": 46,
+      "order": 43,
       "mode": 0,
       "inputs": [
         {
@@ -2248,7 +2127,7 @@
         200
       ],
       "flags": {},
-      "order": 47,
+      "order": 44,
       "mode": 0,
       "inputs": [
         {
@@ -2318,7 +2197,7 @@
         200
       ],
       "flags": {},
-      "order": 48,
+      "order": 45,
       "mode": 0,
       "inputs": [
         {
@@ -2388,7 +2267,7 @@
         200
       ],
       "flags": {},
-      "order": 49,
+      "order": 46,
       "mode": 0,
       "inputs": [
         {
@@ -2458,7 +2337,7 @@
         200
       ],
       "flags": {},
-      "order": 50,
+      "order": 47,
       "mode": 0,
       "inputs": [
         {
@@ -2528,7 +2407,7 @@
         200
       ],
       "flags": {},
-      "order": 51,
+      "order": 48,
       "mode": 0,
       "inputs": [
         {
@@ -2600,7 +2479,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 111,
+      "order": 112,
       "mode": 4,
       "inputs": [
         {
@@ -2806,7 +2685,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 114,
+      "order": 115,
       "mode": 4,
       "inputs": [
         {
@@ -3012,7 +2891,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 112,
+      "order": 113,
       "mode": 4,
       "inputs": [
         {
@@ -3218,7 +3097,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 118,
+      "order": 119,
       "mode": 4,
       "inputs": [
         {
@@ -3424,7 +3303,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 113,
+      "order": 114,
       "mode": 4,
       "inputs": [
         {
@@ -3630,7 +3509,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 115,
+      "order": 116,
       "mode": 4,
       "inputs": [
         {
@@ -3836,7 +3715,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 119,
+      "order": 120,
       "mode": 4,
       "inputs": [
         {
@@ -4041,7 +3920,7 @@
         200
       ],
       "flags": {},
-      "order": 52,
+      "order": 49,
       "mode": 0,
       "inputs": [
         {
@@ -4111,7 +3990,7 @@
         200
       ],
       "flags": {},
-      "order": 53,
+      "order": 50,
       "mode": 0,
       "inputs": [
         {
@@ -4170,102 +4049,26 @@
       "shape": 1
     },
     {
-      "id": 245,
-      "type": "ShowText|pysssss",
+      "id": 227,
+      "type": "PreviewImage",
       "pos": [
-        2700,
-        810
+        1780,
+        1240
       ],
       "size": [
-        510,
-        440
+        210,
+        246
       ],
       "flags": {
-        "collapsed": false
+        "collapsed": true
       },
-      "order": 128,
+      "order": 124,
       "mode": 0,
       "inputs": [
         {
-          "name": "text",
-          "type": "STRING",
-          "link": 11690
-        }
-      ],
-      "outputs": [
-        {
-          "name": "STRING",
-          "shape": 6,
-          "type": "STRING",
-          "links": null
-        }
-      ],
-      "title": "Prompt preview",
-      "properties": {
-        "cnr_id": "comfyui-custom-scripts",
-        "ver": "9f7b3215e6af317603056a9a1666bf6e83e28835",
-        "Node name for S&R": "ShowText|pysssss",
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        "masterpiece, best quality, absurdres, amazing quality, vslinxbleachtybw, inoue orihime, large breasts, brown eyes, long hair, straight hair, female, mature female, 1girl, solo, breasts, looking at viewer, blush, smile, cowboy shot, sleeveless, pants, sweater, hand on hip, v, turtleneck, denim, jeans"
-      ],
-      "shape": 1
-    },
-    {
-      "id": 468,
-      "type": "MarkdownNote",
-      "pos": [
-        2300,
-        810
-      ],
-      "size": [
-        390,
-        440
-      ],
-      "flags": {},
-      "order": 54,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "Debug Information",
-      "properties": {
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        "#### Debug Section\n\nYou can open the previews above by clicking the rectangle symbol next to the name.\nThey show the improved part by the detailer.\n\nIf the whole image is in the preview it means that the Detailer is disabled, no changes have been made.\n\nIf the preview is a black rectangle it means the Ultralytics detection model has not found any matches.\n\nYou might choose a different detection model or change settings in the detailer.\n(See \"Improve further\" on the left)\n\nThe prompt preview to the left side of this note shows you the combination of positive prompts in your workflow.\n\nThe Pre-HiRes Fix-Node to the left shows you how the image looks like before the HiRes-Fix is applied."
-      ],
-      "color": "#222",
-      "bgcolor": "#000",
-      "shape": 1
-    },
-    {
-      "id": 227,
-      "type": "PreviewImage",
-      "pos": [
-        1780,
-        1240
-      ],
-      "size": [
-        210,
-        246
-      ],
-      "flags": {
-        "collapsed": true
-      },
-      "order": 123,
-      "mode": 0,
-      "inputs": [
-        {
-          "name": "images",
-          "type": "IMAGE",
-          "link": 422
+          "name": "images",
+          "type": "IMAGE",
+          "link": 422
         }
       ],
       "outputs": [],
@@ -4296,7 +4099,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 124,
+      "order": 125,
       "mode": 0,
       "inputs": [
         {
@@ -4333,7 +4136,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 125,
+      "order": 126,
       "mode": 0,
       "inputs": [
         {
@@ -4370,7 +4173,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 126,
+      "order": 127,
       "mode": 0,
       "inputs": [
         {
@@ -4407,7 +4210,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 127,
+      "order": 128,
       "mode": 0,
       "inputs": [
         {
@@ -4444,7 +4247,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 121,
+      "order": 122,
       "mode": 0,
       "inputs": [
         {
@@ -4481,7 +4284,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 122,
+      "order": 123,
       "mode": 0,
       "inputs": [
         {
@@ -4518,7 +4321,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 120,
+      "order": 121,
       "mode": 0,
       "inputs": [
         {
@@ -4553,7 +4356,7 @@
         180
       ],
       "flags": {},
-      "order": 55,
+      "order": 51,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -4585,7 +4388,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 56,
+      "order": 52,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -4635,7 +4438,7 @@
         26
       ],
       "flags": {},
-      "order": 141,
+      "order": 142,
       "mode": 0,
       "inputs": [
         {
@@ -4677,7 +4480,7 @@
         60
       ],
       "flags": {},
-      "order": 102,
+      "order": 103,
       "mode": 0,
       "inputs": [
         {
@@ -4724,7 +4527,7 @@
         280
       ],
       "flags": {},
-      "order": 57,
+      "order": 53,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -4767,7 +4570,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 58,
+      "order": 54,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -4809,7 +4612,7 @@
         30
       ],
       "flags": {},
-      "order": 59,
+      "order": 55,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -4861,7 +4664,7 @@
         "allow_interaction": false,
         "pinned": true
       },
-      "order": 60,
+      "order": 56,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -4882,104 +4685,6 @@
       "color": "#fff0",
       "bgcolor": "#fff0"
     },
-    {
-      "id": 591,
-      "type": "MarkdownNote",
-      "pos": [
-        -70,
-        1300
-      ],
-      "size": [
-        720,
-        220
-      ],
-      "flags": {
-        "pinned": true
-      },
-      "order": 61,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "Refiner",
-      "properties": {
-        "ue_properties": {
-          "widget_ue_connectable": {},
-          "version": "7.0.1"
-        }
-      },
-      "widgets_values": [
-        "## ← Explanation Refiner\nIf you’re using refiner, the image is generated with two different checkpoints, which also means it requires more VRAM. The first checkpoint creates the bulk of the image, including composition and structure, while the second checkpoint refines and touches up details. The slider “steps spent on base” determines how many steps are allocated to the first checkpoint, while the remaining steps (up to the total steps set in Sampler Settings) are spent with the refiner. Usually, a specific refiner checkpoint is loaded just for that second phase.\n\nIf you combine a refiner with hires fix, keep in mind that only the first checkpoint is used for the hires pass due to technical limitations — so if you’re trying to apply a second checkpoint for style, it’s best to use a very low denoise value (around 0.1–0.15) for the hires fix. With the rise of hires fix and upscaling, refiners have become mostly obsolete, since these methods achieve equal or better results in a more flexible and efficient way."
-      ],
-      "color": "#222",
-      "bgcolor": "#000",
-      "shape": 1
-    },
-    {
-      "id": 593,
-      "type": "MarkdownNote",
-      "pos": [
-        1010,
-        1300
-      ],
-      "size": [
-        270,
-        570
-      ],
-      "flags": {
-        "collapsed": false,
-        "pinned": true
-      },
-      "order": 62,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "Recommended Detailer LoRA's",
-      "properties": {
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        "#### General Detailer (Can be used for everything)\n- [NoobAI-XL Detailer](https://civitai.com/models/987736?modelVersionId=1147221)\n\n#### General Detailer for V-Pred Models\n- [NoobAI-XL Detailer](https://civitai.com/models/987736?modelVersionId=1209350)\n\n#### Eyes\n- [Eye detail LoRA [Illustrious+FLUX]](https://civitai.com/models/1300857?modelVersionId=1468284)\n\n#### Hands\n- [Hands XL + SD 1.5 + FLUX.1-dev + Pony + Illustrious](https://civitai.com/models/200255?modelVersionId=1464262)\n\n#### Nipples\n- [Nipple LORA for ADetailer / ADetailer用の乳首LORA Anmagine XL 3.1-4.0](https://civitai.com/models/502107\n)\n- [Nipple LORA for ADetailer / ADetailer用の乳首LORA](https://civitai.com/models/493096)\n- [[Illustrious-XL] Nipple LORA for ADetailer / ADetailer用の乳首LORA](https://civitai.com/models/827482)"
-      ],
-      "color": "#222",
-      "bgcolor": "#000",
-      "shape": 1
-    },
-    {
-      "id": 592,
-      "type": "MarkdownNote",
-      "pos": [
-        660,
-        1300
-      ],
-      "size": [
-        340,
-        570
-      ],
-      "flags": {
-        "collapsed": false,
-        "pinned": true
-      },
-      "order": 63,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "Recommended Ultralytics Models",
-      "properties": {
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        "#### FACE\n- [Mask aDetailer - Face detailer for Eyes, Eyebrows, and Nose](https://civitai.com/models/1222100/mask-adetailer-face-detailer-for-eyes-eyebrows-and-nose)\n- [ADetailer Anime Girl Face Segmentation / 漫画娘 顔検知](https://civitai.com/models/1076050/adetailer-anime-girl-face-segmentation)\n\n#### EYES\n- [Eyes detection (Adetailer)](https://civitai.com/models/150925/eyes-detection-adetailer)\n- [Eyeful | Robust eye detection for Adetailer / ComfyUI](https://civitai.com/models/178518/eyeful-or-robust-eye-detection-for-adetailer-comfyui)\n- [PitEyeDetailer](https://huggingface.co/camenduru/ultralytics/blob/main/PitEyeDetailer-v2-seg.pt)\n\n#### LIPS / Mouth\n- [ADetailer (After Detailer) Lips Model](https://civitai.com/models/142240/adetailer-after-detailer-lips-model)\n- [ADetailer 2d mouth detection [yolo/segmentation]](https://civitai.com/models/1306938/adetailer-2d-mouth-detection-yolosegmentation)\n\n\n#### NOSE\n- [ADetailer (Nose)](https://www.mediafire.com/file/f6buda8p06cosn6/adetailerNose_.pt/file) ([originally](https://civitai.com/models/1232431/adetailer-nose) from user [vortumanko](https://civitai.com/user/vortumanko) but taken offline by owner, works best with anthro noses, for everything else i recommend one of the face detailers above)\n\n#### HANDS\n- [hand_yolov8s.pt](https://huggingface.co/Bingsu/adetailer/blob/main/hand_yolov8s.pt)\n- [hand_yolov9c.pt](https://huggingface.co/Bingsu/adetailer/blob/main/hand_yolov9c.pt)\n\n#### NIPPLES\n- [Nipple Adetailer for Anime Girls](https://civitai.com/models/1132590/nipple-adetailer-for-anime-girls)\n- [ADetailer Nipples model](https://civitai.com/models/490259/adetailer-nipples-model)\n\n\n#### VAGINA\n- [Anime NSFW Detection/ADetailer All-in-One](https://civitai.com/models/1313556/anime-nsfw-detectionadetailer-all-in-one)\n- [Pussy Adetailer](https://civitai.com/models/150234/pussy-adetailer)\n\n\n#### PENIS\n- [Cock and Ball Detection 2D edition (ADetailer)](https://civitai.com/models/310687/cock-and-ball-detection-2d-edition-adetailer)\n"
-      ],
-      "color": "#222",
-      "bgcolor": "#000",
-      "shape": 1
-    },
     {
       "id": 584,
       "type": "MarkdownNote",
@@ -4994,7 +4699,7 @@
       "flags": {
         "pinned": true
       },
-      "order": 64,
+      "order": 57,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -5024,7 +4729,7 @@
         30
       ],
       "flags": {},
-      "order": 65,
+      "order": 58,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -5074,7 +4779,7 @@
         30
       ],
       "flags": {},
-      "order": 66,
+      "order": 59,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -5135,7 +4840,7 @@
       "flags": {
         "collapsed": false
       },
-      "order": 67,
+      "order": 60,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -5185,7 +4890,7 @@
         110
       ],
       "flags": {},
-      "order": 68,
+      "order": 61,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -5230,7 +4935,7 @@
         30
       ],
       "flags": {},
-      "order": 69,
+      "order": 62,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -5289,7 +4994,7 @@
         230
       ],
       "flags": {},
-      "order": 70,
+      "order": 63,
       "mode": 0,
       "inputs": [],
       "outputs": [],
@@ -5319,7 +5024,7 @@
         60
       ],
       "flags": {},
-      "order": 108,
+      "order": 109,
       "mode": 0,
       "inputs": [
         {
@@ -5371,7 +5076,7 @@
         142
       ],
       "flags": {},
-      "order": 71,
+      "order": 64,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -5427,7 +5132,7 @@
       "id": 455,
       "type": "IPAdapterTiled",
       "pos": [
-        -30,
+        -40,
         1770
       ],
       "size": [
@@ -5437,7 +5142,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 136,
+      "order": 137,
       "mode": 4,
       "inputs": [
         {
@@ -5528,7 +5233,7 @@
       "id": 456,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        -30,
+        -40,
         1810
       ],
       "size": [
@@ -5538,7 +5243,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 72,
+      "order": 65,
       "mode": 4,
       "inputs": [
         {
@@ -5576,7 +5281,7 @@
       "id": 454,
       "type": "IPAdapterTiled",
       "pos": [
-        -230,
+        -240,
         1770
       ],
       "size": [
@@ -5586,7 +5291,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 135,
+      "order": 136,
       "mode": 4,
       "inputs": [
         {
@@ -5677,7 +5382,7 @@
       "id": 414,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        -230,
+        -240,
         1810
       ],
       "size": [
@@ -5687,7 +5392,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 73,
+      "order": 66,
       "mode": 4,
       "inputs": [
         {
@@ -5724,7 +5429,7 @@
       "id": 395,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        -230,
+        -240,
         1680
       ],
       "size": [
@@ -5734,7 +5439,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 74,
+      "order": 67,
       "mode": 4,
       "inputs": [
         {
@@ -5771,7 +5476,7 @@
       "id": 534,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        -30,
+        -40,
         1640
       ],
       "size": [
@@ -5781,7 +5486,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 75,
+      "order": 68,
       "mode": 4,
       "inputs": [
         {
@@ -5818,7 +5523,7 @@
       "id": 542,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        190,
+        170,
         1650
       ],
       "size": [
@@ -5828,7 +5533,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 76,
+      "order": 69,
       "mode": 4,
       "inputs": [
         {
@@ -5866,7 +5571,7 @@
       "id": 607,
       "type": "67a0508f-aa7b-4ba2-8265-d3fae6da4226",
       "pos": [
-        190,
+        170,
         1610
       ],
       "size": [
@@ -5876,7 +5581,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 145,
+      "order": 146,
       "mode": 4,
       "inputs": [
         {
@@ -5928,7 +5633,7 @@
         890
       ],
       "flags": {},
-      "order": 110,
+      "order": 111,
       "mode": 0,
       "inputs": [
         {
@@ -5963,7 +5668,7 @@
         110
       ],
       "flags": {},
-      "order": 77,
+      "order": 70,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -6007,7 +5712,7 @@
       "id": 486,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        190,
+        170,
         1810
       ],
       "size": [
@@ -6017,7 +5722,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 78,
+      "order": 71,
       "mode": 4,
       "inputs": [
         {
@@ -6054,7 +5759,7 @@
       "id": 610,
       "type": "f8d9af42-d1b5-4ef5-a349-267ed8b6186e",
       "pos": [
-        440,
+        390,
         1770
       ],
       "size": [
@@ -6064,7 +5769,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 99,
+      "order": 100,
       "mode": 4,
       "inputs": [
         {
@@ -6099,7 +5804,7 @@
       "id": 487,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        440,
+        390,
         1810
       ],
       "size": [
@@ -6109,7 +5814,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 79,
+      "order": 72,
       "mode": 4,
       "inputs": [
         {
@@ -6147,7 +5852,7 @@
       "id": 608,
       "type": "9726ad71-5451-4f61-8889-dbbd630619dc",
       "pos": [
-        190,
+        170,
         1770
       ],
       "size": [
@@ -6157,7 +5862,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 100,
+      "order": 101,
       "mode": 4,
       "inputs": [
         {
@@ -6188,129 +5893,6 @@
       "bgcolor": "#5c5c5c",
       "shape": 1
     },
-    {
-      "id": 457,
-      "type": "Fast Bypasser (rgthree)",
-      "pos": [
-        -240,
-        380
-      ],
-      "size": [
-        320,
-        130
-      ],
-      "flags": {},
-      "order": 104,
-      "mode": 0,
-      "inputs": [
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "IPAdapter Style",
-          "type": "*",
-          "link": 3191
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Low VRAM for Style",
-          "type": "*",
-          "link": 10373
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "IPAdapter Composition",
-          "type": "*",
-          "link": 10374
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Low VRAM for Composition",
-          "type": "*",
-          "link": 10375
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "",
-          "type": "*",
-          "link": null
-        }
-      ],
-      "outputs": [
-        {
-          "dir": 4,
-          "label": " ",
-          "name": "OPT_CONNECTION",
-          "type": "*",
-          "links": null
-        }
-      ],
-      "title": "IPAdapter",
-      "properties": {
-        "toggleRestriction": "default",
-        "collapse_connections": true,
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "color": "#233",
-      "bgcolor": "#355",
-      "shape": 1
-    },
-    {
-      "id": 561,
-      "type": "6c2eee0d-5bd7-4029-9333-7f1b0ed688f2",
-      "pos": [
-        1510,
-        -170
-      ],
-      "size": [
-        310,
-        110
-      ],
-      "flags": {},
-      "order": 80,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [
-        {
-          "name": "CONTROL_NET",
-          "type": "CONTROL_NET",
-          "links": [
-            11948
-          ]
-        },
-        {
-          "name": "preprocessor",
-          "type": "COMBO",
-          "links": [
-            12709
-          ]
-        }
-      ],
-      "properties": {
-        "cnr_id": "comfy-core",
-        "ver": "0.3.51",
-        "ue_properties": {
-          "widget_ue_connectable": {
-            "cnet": true,
-            "preprocessor": true
-          },
-          "version": "7.0.1"
-        }
-      },
-      "widgets_values": [
-        "noobAI\\noobaiXLControlnet_openposeModel.safetensors",
-        "OpenposePreprocessor"
-      ],
-      "color": "#233",
-      "bgcolor": "#355",
-      "shape": 1
-    },
     {
       "id": 294,
       "type": "mxSlider",
@@ -6323,7 +5905,7 @@
         30
       ],
       "flags": {},
-      "order": 81,
+      "order": 73,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -6364,7 +5946,7 @@
       "id": 604,
       "type": "d63f9638-9bde-4613-a8dc-faa6238b912b",
       "pos": [
-        -30,
+        -40,
         1600
       ],
       "size": [
@@ -6374,7 +5956,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 144,
+      "order": 145,
       "mode": 4,
       "inputs": [
         {
@@ -6495,7 +6077,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 82,
+      "order": 74,
       "mode": 4,
       "inputs": [
         {
@@ -6528,50 +6110,11 @@
       "bgcolor": "#5c5c5c",
       "shape": 1
     },
-    {
-      "id": 407,
-      "type": "PreviewImage",
-      "pos": [
-        1780,
-        810
-      ],
-      "size": [
-        250,
-        260
-      ],
-      "flags": {
-        "collapsed": false
-      },
-      "order": 134,
-      "mode": 0,
-      "inputs": [
-        {
-          "name": "images",
-          "type": "IMAGE",
-          "link": 13476
-        }
-      ],
-      "outputs": [],
-      "title": "ControlNet Pose Preview",
-      "properties": {
-        "cnr_id": "comfy-core",
-        "ver": "0.3.33",
-        "Node name for S&R": "PreviewImage",
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [],
-      "color": "#233",
-      "bgcolor": "#355",
-      "shape": 1
-    },
     {
       "id": 603,
       "type": "easy anythingIndexSwitch",
       "pos": [
-        -230,
+        -240,
         1640
       ],
       "size": [
@@ -6581,7 +6124,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 143,
+      "order": 144,
       "mode": 4,
       "inputs": [
         {
@@ -6645,7 +6188,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 131,
+      "order": 132,
       "mode": 4,
       "inputs": [
         {
@@ -6774,7 +6317,7 @@
         226
       ],
       "flags": {},
-      "order": 98,
+      "order": 99,
       "mode": 0,
       "inputs": [
         {
@@ -6877,7 +6420,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 109,
+      "order": 110,
       "mode": 4,
       "inputs": [
         {
@@ -7082,7 +6625,7 @@
         280
       ],
       "flags": {},
-      "order": 83,
+      "order": 75,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -7143,7 +6686,7 @@
       "id": 491,
       "type": "Mute / Bypass Repeater (rgthree)",
       "pos": [
-        390,
+        370,
         1650
       ],
       "size": [
@@ -7153,7 +6696,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 84,
+      "order": 76,
       "mode": 4,
       "inputs": [
         {
@@ -7190,7 +6733,7 @@
       "id": 620,
       "type": "c0330ef1-4c81-486f-99aa-b2f3e41be549",
       "pos": [
-        390,
+        370,
         1610
       ],
       "size": [
@@ -7200,7 +6743,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 146,
+      "order": 147,
       "mode": 4,
       "inputs": [
         {
@@ -7247,98 +6790,30 @@
       "shape": 1
     },
     {
-      "id": 392,
-      "type": "Fast Bypasser (rgthree)",
+      "id": 142,
+      "type": "mxSlider",
       "pos": [
-        -240,
-        550
+        -480,
+        -40
       ],
       "size": [
-        320,
-        110
+        210,
+        30
       ],
-      "flags": {
-        "collapsed": false
-      },
-      "order": 106,
+      "flags": {},
+      "order": 77,
       "mode": 0,
-      "inputs": [
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "ControlNet",
-          "type": "*",
-          "link": 738
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "PreProcessor",
-          "type": "*",
-          "link": 10425
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Low VRAM for ControlNet",
-          "type": "*",
-          "link": 10426
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "",
-          "type": "*",
-          "link": null
-        }
-      ],
+      "inputs": [],
       "outputs": [
         {
-          "dir": 4,
-          "label": " ",
-          "name": "OPT_CONNECTION",
-          "type": "*",
-          "links": []
+          "name": "",
+          "type": "INT",
+          "links": [
+            11729
+          ]
         }
       ],
-      "title": "ControlNet + PreProcessor",
-      "properties": {
-        "toggleRestriction": "default",
-        "collapse_connections": true,
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "color": "#233",
-      "bgcolor": "#355",
-      "shape": 1
-    },
-    {
-      "id": 142,
-      "type": "mxSlider",
-      "pos": [
-        -480,
-        -40
-      ],
-      "size": [
-        210,
-        30
-      ],
-      "flags": {},
-      "order": 85,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [
-        {
-          "name": "",
-          "type": "INT",
-          "links": [
-            11729
-          ]
-        }
-      ],
-      "title": "Batch Size",
+      "title": "Batch Size",
       "properties": {
         "cnr_id": "comfyui-mxtoolkit",
         "ver": "d3333cca48025509932766ffda98e82050453118",
@@ -7367,7 +6842,7 @@
       "id": 594,
       "type": "0941940b-e86a-427a-bd29-51cf47d05345",
       "pos": [
-        -230,
+        -240,
         1600
       ],
       "size": [
@@ -7377,7 +6852,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 142,
+      "order": 143,
       "mode": 4,
       "inputs": [
         {
@@ -7466,7 +6941,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 101,
+      "order": 102,
       "mode": 0,
       "inputs": [
         {
@@ -7518,7 +6993,7 @@
         760
       ],
       "flags": {},
-      "order": 140,
+      "order": 141,
       "mode": 0,
       "inputs": [
         {
@@ -7590,7 +7065,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 117,
+      "order": 118,
       "mode": 0,
       "inputs": [
         {
@@ -7629,70 +7104,6 @@
       "bgcolor": "#5c5c5c",
       "shape": 1
     },
-    {
-      "id": 360,
-      "type": "MarkdownNote",
-      "pos": [
-        -1150,
-        1720
-      ],
-      "size": [
-        370,
-        100
-      ],
-      "flags": {
-        "pinned": true
-      },
-      "order": 86,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "Pose Collections",
-      "properties": {
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        "### Civitai has a large amount of available poses collections you can browse through the Poses filter [here](https://civitai.com/search/models?modelType=Poses&sortBy=models_v9)."
-      ],
-      "color": "#222",
-      "bgcolor": "#000",
-      "shape": 1
-    },
-    {
-      "id": 323,
-      "type": "MarkdownNote",
-      "pos": [
-        -1150,
-        -340
-      ],
-      "size": [
-        370,
-        2020
-      ],
-      "flags": {
-        "pinned": true
-      },
-      "order": 87,
-      "mode": 0,
-      "inputs": [],
-      "outputs": [],
-      "title": "How to use",
-      "properties": {
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [
-        "#### Model Backend\nIn the **Model Backend** group, choose your Checkpoint, VAE, Upscale Model as well as ControlNet Model and the Pre-processor Model. <br>\nIf you're using a v-prediction model, make sure to enable \"Is V-Pred Model\".\n\n\nOnly use \"Patch Sage Attention\" if you know what you do. You need to install triton on your PC which can be a lengthy and troublesome undertaking while only giving you a miniscule speed boost of maybe 2-3 seconds per image. You can find a guide for it [here](https://www.reddit.com/r/comfyui/comments/1hn32jc/step_by_step_video_tutorial_on_installing/).\n\n---\n\n\n#### LoRA's / Detection Models\nIn the second row select the LoRA's of your choice, select your detection models for the body parts and fill out the prompts for specific body parts(or leave as is) and select Detailer LoRA's for specific body-parts if you have any.\n\n---\n\n#### Sampler Settings\nChange the sampler settings according to your wishes or leave as is. You can change the Resolution more accurately by double clicking the height and width values and entering a value manually. The default settings are my personal preferences. <br>\nThe settings for CFG, steps, scheduler & sampler also apply to all of the detailers to keep a consistent setting for all parts of the generation. <br>\nAt the bottom of the \"Sampler settings\"-Group you can find three sliders that are exclusively for ControlNet. If you do not know what they do you should leave them as is, but they can be used to control the influence of the ControlNet over your final result. <br>\nThe same goes for the IPAdapter Settings.\n\n---\n\n#### Function Control\nIn the \"Function Control\"-Group you can select which Detailers to run, what manual body part prompts to use and what detailer LoRA's to activate.\nHere you can also control if you want to use a start and/or quality prompt, if you'd like to use ControlNet and/or the Pre-Processor to either imitate a pose from a pose image or a reference image and if you want to use the IPAdapter to imitate an image's style and/or composition. <br>\nYou can also enable HiRes-Fix, which resamples the upscaled image with a low denoise value to repaint it for higher resolution and quality. It’s recommended to use \"Color Fix\" alongside it to preserve the original colors, as resampling can sometimes wash out contrast. <br>\nThe Hi-Res Fix Denoise value is only applied when Hi-Res Fix is enabled and determines how much of the original image is overwritten. A value between 0.25 and 0.35 is recommended. <br>\nFurthermore you can select which of the general LoRA's you want to enable that'll be used throughout the whole process including the detailing - you can set them in the \"LoRA's\"-Group below. <br>\nWhen using the upscaling function you can also set the factor by which you want to upscale your image instead of leaving it to the Upscale Model itself for more control.\n\n---\n\n#### ControlNet\nYou can either provide a full image in the \"Pre-Processing\" image selector or a ControlNet pose image in the \"Load ControlNet Pose\" image selector below. <br>\nThe ControlNet image has to match the ControlNet model in the node inside of the \"Model Backend\"-Group.<br>\nIf you want to imitate the pose of an image and have selected a image in the \"Pre-Processing\"-Node inside the \"ControlNet\"-Group you have to enable the \"Use Pre-Processor\"-Node in the \"Process Control\"-Group.<br>\nAfter selecting a pre-processing model at the bottom of the \"Model Backend\"-Group you can see a preview of the generated/used next to the ControlNet switches in the \"Process Control\"-Group. <br>\nUsing Low VRAM Mode ALONGSIDE ControlNet will downscale the input image of the used pose(no matter if pre-processed or not) to 512px on it's smallest size to save some VRAM. This also impacts results so only use it if you have 12GB VRAM or less or if you want faster generation and don't mind a decrease in quality.\n\nYou can find an in-depth guide about what ControlNet is, what it does and how each model works in [this](https://stable-diffusion-art.com/controlnet/) guide. (It's for A1111WebUI but you'll understand)\n\n---\n\n#### IPAdapter\nIPAdapter let's you copy the style of an image simply by providing an IPAdapter Model & a Clip Model. <br>\nIt basically works as a 1-Image-LoRA that injects itself into the Model and applies the style of the image like a LoRA. The composition part works similar to ControlNet where the general composition is being copied by the image. <br>\nYou can select an image for the style and an image for the composition individually in the \"IPAdapter (Optional)\"-Group and then set the strength of their influence in the \"Sampler Settings\"-Group. <br>\nIn general if you're just trying to copy the style of one image and the position of another image i'd recommend using ControlNet for the pose and IPAdapter for the style. <br>\nIf you use the \"Low VRAM\"-Option, ALONGSIDE the IPAdapter, your input image will be scaled down to a resolution where your smallest side of the image has 512px to decrease the VRAM usage that IPAdapter needs to analyze the image.<br>\n<br>\nBe aware that you still have to prompt correctly with IPAdapter, otherwise the concept or pose of the input image will heavily influence the final image(if you're not using ControlNet or a Composition image).\n\n---\n\n#### Prompts\nConsists of start quality prompts, positive prompt, end quality prompts and negative prompts. If you're like me and want to use the same quality tags across multiple different prompts you can activate/deactivate the quality prompts in the \"Process Control\"-Group.\nComma automatically gets appended to the end of the quality prompt and the positive prompt. To see what your full prompt looks like you can check the \"Prompt preview\"-Node inside the \"Debug\"-Group underneath the image preview.\n\n---\n\n#### Detailer Prompts\nConsists of one \"Denoise\"-Slider and one prompt field for each body part that has a detailer. <br> The prompt field is there to let you define what should be inpainted into the detail area while the denoise slider controls how much of the original shape, form, and color will be replaced. <br> A high value will completely overwrite the area while a lower value will preserve the original form (and color depending on how low) and just enhance it at a higher resolution. <br> If the anatomy already looks good and you only want to improve quality, a denoise value of 0.25 to 0.35 is recommended. If the anatomy is off - like extra fingers - you can increase it to 0.5 or higher and see if the results improve. <br> The higher your your denoise value - the higher impact your prompt has. You can also leave the prompt deactivated (In the \"Detailer Function Control\"-Group) and only use a low denoise value to simply detail the area in a higher resolution without changing too much of what's being shown. <br> As a general rule for the denoise setting you can remember that the higher the denoise value, the more the detailer will ignore what's already in that area. \n\n---\n\n\n`To the left are my recommended detection models as well as Detailer LoRA's for some of them that i use regularly. At the bottom you can find collections of Poses for ControlNet.`"
-      ],
-      "color": "#222",
-      "bgcolor": "#000",
-      "shape": 1
-    },
     {
       "id": 621,
       "type": "MathExpression|pysssss",
@@ -7707,7 +7118,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 105,
+      "order": 106,
       "mode": 0,
       "inputs": [
         {
@@ -7775,7 +7186,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 137,
+      "order": 138,
       "mode": 4,
       "inputs": [
         {
@@ -7841,7 +7252,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 103,
+      "order": 104,
       "mode": 0,
       "inputs": [
         {
@@ -7869,6 +7280,7 @@
           "link": null
         },
         {
+          "dir": 3,
           "name": "any_05",
           "type": "VAE",
           "link": null
@@ -7914,7 +7326,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 116,
+      "order": 117,
       "mode": 0,
       "inputs": [
         {
@@ -7943,7 +7355,7 @@
         },
         {
           "label": "anything",
-          "name": "anything80",
+          "name": "anything89",
           "type": "*",
           "link": null
         }
@@ -7959,7 +7371,7 @@
           "group_restricted": 0,
           "color_restricted": 0,
           "widget_ue_connectable": {},
-          "next_input_index": 80
+          "next_input_index": 89
         }
       },
       "widgets_values": [],
@@ -7981,7 +7393,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 129,
+      "order": 130,
       "mode": 0,
       "inputs": [
         {
@@ -8179,7 +7591,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 147,
+      "order": 148,
       "mode": 0,
       "inputs": [
         {
@@ -8280,7 +7692,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 148,
+      "order": 149,
       "mode": 0,
       "inputs": [
         {
@@ -8331,7 +7743,7 @@
         30
       ],
       "flags": {},
-      "order": 88,
+      "order": 78,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -8380,7 +7792,7 @@
         30
       ],
       "flags": {},
-      "order": 89,
+      "order": 79,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -8429,7 +7841,7 @@
         226
       ],
       "flags": {},
-      "order": 132,
+      "order": 133,
       "mode": 0,
       "inputs": [
         {
@@ -8530,7 +7942,7 @@
         60
       ],
       "flags": {},
-      "order": 90,
+      "order": 80,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -8571,7 +7983,7 @@
         142
       ],
       "flags": {},
-      "order": 91,
+      "order": 81,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -8633,7 +8045,7 @@
         230
       ],
       "flags": {},
-      "order": 107,
+      "order": 108,
       "mode": 0,
       "inputs": [
         {
@@ -8705,7 +8117,7 @@
       "flags": {
         "collapsed": true
       },
-      "order": 139,
+      "order": 140,
       "mode": 0,
       "inputs": [
         {
@@ -9023,7 +8435,7 @@
         30
       ],
       "flags": {},
-      "order": 92,
+      "order": 82,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -9060,43 +8472,6 @@
       "bgcolor": "#335",
       "shape": 1
     },
-    {
-      "id": 532,
-      "type": "PreviewImage",
-      "pos": [
-        2040,
-        810
-      ],
-      "size": [
-        250,
-        260
-      ],
-      "flags": {
-        "collapsed": false
-      },
-      "order": 138,
-      "mode": 0,
-      "inputs": [
-        {
-          "name": "images",
-          "type": "IMAGE",
-          "link": 11123
-        }
-      ],
-      "outputs": [],
-      "title": "Pre-HiRes Fix",
-      "properties": {
-        "cnr_id": "comfy-core",
-        "ver": "0.3.27",
-        "Node name for S&R": "PreviewImage",
-        "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
-        }
-      },
-      "widgets_values": [],
-      "shape": 1
-    },
     {
       "id": 627,
       "type": "Primitive boolean [Crystools]",
@@ -9109,7 +8484,7 @@
         60
       ],
       "flags": {},
-      "order": 93,
+      "order": 83,
       "mode": 0,
       "inputs": [],
       "outputs": [
@@ -9139,229 +8514,887 @@
       "shape": 1
     },
     {
-      "id": 291,
+      "id": 333,
       "type": "LoadImage",
       "pos": [
         1510,
-        -20
+        370
+      ],
+      "size": [
+        310,
+        350
+      ],
+      "flags": {},
+      "order": 84,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [
+        {
+          "name": "IMAGE",
+          "type": "IMAGE",
+          "links": [
+            704,
+            722,
+            741,
+            12706
+          ]
+        },
+        {
+          "name": "MASK",
+          "type": "MASK",
+          "links": null
+        }
+      ],
+      "title": "Load ControlNet Pose",
+      "properties": {
+        "cnr_id": "comfy-core",
+        "ver": "0.3.27",
+        "Node name for S&R": "LoadImage",
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [
+        "example.png",
+        "image"
+      ],
+      "color": "#233",
+      "bgcolor": "#355",
+      "shape": 1
+    },
+    {
+      "id": 319,
+      "type": "Fast Bypasser (rgthree)",
+      "pos": [
+        -240,
+        -40
+      ],
+      "size": [
+        320,
+        180
+      ],
+      "flags": {},
+      "order": 134,
+      "mode": 0,
+      "inputs": [
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Image Selection",
+          "type": "*",
+          "link": 14765
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Upscaling",
+          "type": "*",
+          "link": 14766
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Hi-Res Fix",
+          "type": "*",
+          "link": 14767
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Color Fix for Hi-Res",
+          "type": "*",
+          "link": 14768
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Start quality prompt (Optional)",
+          "type": "*",
+          "link": 14769
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "End quality prompt (Optional)",
+          "type": "*",
+          "link": 14770
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "",
+          "type": "*",
+          "link": null
+        }
+      ],
+      "outputs": [
+        {
+          "dir": 4,
+          "label": " ",
+          "name": "OPT_CONNECTION",
+          "type": "*",
+          "links": null
+        }
+      ],
+      "title": "Process Control",
+      "properties": {
+        "toggleRestriction": "default",
+        "collapse_connections": true,
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "color": "#432",
+      "bgcolor": "#653",
+      "shape": 1
+    },
+    {
+      "id": 585,
+      "type": "Fast Groups Bypasser (rgthree)",
+      "pos": [
+        -440,
+        810
+      ],
+      "size": [
+        350,
+        82
+      ],
+      "flags": {},
+      "order": 85,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [
+        {
+          "name": "OPT_CONNECTION",
+          "type": "*",
+          "links": null
+        }
+      ],
+      "title": "Use Refiner or Normal Sampler?",
+      "properties": {
+        "matchColors": "#00ff80",
+        "matchTitle": "",
+        "showNav": false,
+        "showAllGraphs": true,
+        "sort": "position",
+        "customSortAlphabet": "",
+        "toggleRestriction": "max one",
+        "ue_properties": {
+          "widget_ue_connectable": {},
+          "version": "7.0.1"
+        }
+      },
+      "color": "#223",
+      "bgcolor": "#335",
+      "shape": 1
+    },
+    {
+      "id": 457,
+      "type": "Fast Bypasser (rgthree)",
+      "pos": [
+        -240,
+        370
+      ],
+      "size": [
+        320,
+        130
+      ],
+      "flags": {},
+      "order": 105,
+      "mode": 0,
+      "inputs": [
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "IPAdapter Style",
+          "type": "*",
+          "link": 3191
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Low VRAM for Style",
+          "type": "*",
+          "link": 10373
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "IPAdapter Composition",
+          "type": "*",
+          "link": 10374
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Low VRAM for Composition",
+          "type": "*",
+          "link": 10375
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "",
+          "type": "*",
+          "link": null
+        }
+      ],
+      "outputs": [
+        {
+          "dir": 4,
+          "label": " ",
+          "name": "OPT_CONNECTION",
+          "type": "*",
+          "links": null
+        }
+      ],
+      "title": "IPAdapter",
+      "properties": {
+        "toggleRestriction": "default",
+        "collapse_connections": true,
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "color": "#233",
+      "bgcolor": "#355",
+      "shape": 1
+    },
+    {
+      "id": 392,
+      "type": "Fast Bypasser (rgthree)",
+      "pos": [
+        -240,
+        540
+      ],
+      "size": [
+        320,
+        110
+      ],
+      "flags": {
+        "collapsed": false
+      },
+      "order": 107,
+      "mode": 0,
+      "inputs": [
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "ControlNet",
+          "type": "*",
+          "link": 738
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "PreProcessor",
+          "type": "*",
+          "link": 10425
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "Low VRAM for ControlNet",
+          "type": "*",
+          "link": 10426
+        },
+        {
+          "dir": 3,
+          "label": " ",
+          "name": "",
+          "type": "*",
+          "link": null
+        }
+      ],
+      "outputs": [
+        {
+          "dir": 4,
+          "label": " ",
+          "name": "OPT_CONNECTION",
+          "type": "*",
+          "links": []
+        }
+      ],
+      "title": "ControlNet + PreProcessor",
+      "properties": {
+        "toggleRestriction": "default",
+        "collapse_connections": true,
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "color": "#233",
+      "bgcolor": "#355",
+      "shape": 1
+    },
+    {
+      "id": 299,
+      "type": "mxSlider",
+      "pos": [
+        -510,
+        590
+      ],
+      "size": [
+        240,
+        30
+      ],
+      "flags": {},
+      "order": 86,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [
+        {
+          "name": "",
+          "type": "FLOAT",
+          "links": [
+            553
+          ]
+        }
+      ],
+      "title": "ControlNet End Percent",
+      "properties": {
+        "cnr_id": "comfyui-mxtoolkit",
+        "ver": "0a3857ada2c1780188b9d5abb95f9f3e6561d976",
+        "Node name for S&R": "mxSlider",
+        "value": 1,
+        "min": 0,
+        "max": 1,
+        "step": 0.001,
+        "decimals": 3,
+        "snap": true,
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [
+        1,
+        1,
+        1
+      ],
+      "color": "#432",
+      "bgcolor": "#653",
+      "shape": 1
+    },
+    {
+      "id": 291,
+      "type": "LoadImage",
+      "pos": [
+        1510,
+        -20
+      ],
+      "size": [
+        310,
+        350
+      ],
+      "flags": {},
+      "order": 87,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [
+        {
+          "name": "IMAGE",
+          "type": "IMAGE",
+          "links": [
+            544,
+            723,
+            12707
+          ]
+        },
+        {
+          "name": "MASK",
+          "type": "MASK",
+          "links": null
+        }
+      ],
+      "title": "Pre-Process image to Pose",
+      "properties": {
+        "cnr_id": "comfy-core",
+        "ver": "0.3.27",
+        "Node name for S&R": "LoadImage",
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [
+        "example.png",
+        "image"
+      ],
+      "color": "#233",
+      "bgcolor": "#355",
+      "shape": 1
+    },
+    {
+      "id": 561,
+      "type": "6c2eee0d-5bd7-4029-9333-7f1b0ed688f2",
+      "pos": [
+        1510,
+        -170
+      ],
+      "size": [
+        310,
+        110
+      ],
+      "flags": {},
+      "order": 88,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [
+        {
+          "name": "CONTROL_NET",
+          "type": "CONTROL_NET",
+          "links": [
+            11948
+          ]
+        },
+        {
+          "name": "preprocessor",
+          "type": "COMBO",
+          "links": [
+            12709
+          ]
+        }
+      ],
+      "properties": {
+        "cnr_id": "comfy-core",
+        "ver": "0.3.51",
+        "ue_properties": {
+          "widget_ue_connectable": {
+            "cnet": true,
+            "preprocessor": true
+          },
+          "version": "7.0.1"
+        }
+      },
+      "widgets_values": [
+        "noobAI\\noobaiXLControlnet_epsCanny.safetensors",
+        "PyraCannyPreprocessor"
+      ],
+      "color": "#233",
+      "bgcolor": "#355",
+      "shape": 1
+    },
+    {
+      "id": 629,
+      "type": "MarkdownNote",
+      "pos": [
+        1590,
+        1300
+      ],
+      "size": [
+        250,
+        570
+      ],
+      "flags": {
+        "pinned": true
+      },
+      "order": 89,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [],
+      "title": "Detailer, Pre-Filled Values",
+      "properties": {
+        "ue_properties": {
+          "widget_ue_connectable": {},
+          "version": "7.0.1"
+        }
+      },
+      "widgets_values": [
+        "### You are free to remove the connections for pre-filled values like steps, cfg, sampler name & scheduler. (Don't disconnect denoise, you can set it conveniently in the \"Detailer Control-Group\") \n### Usually you will receive better results by tweaking these settings but it requires some fiddling, so here are some general tips:\n\n``sampler_name``: DPM++ 2M(dpmpp_2m) or UniPC for clean, stable detail. Less drastic changes to the input image.\n\n``scheduler``: karras (keeps more steps in the low-noise region, better for inpainting).\n\n``steps``: 20–24 for most (faces/lips); 18–22 for eyes; 24–28 for hands/genitals when fixes are hard.\n\n``cfg``: 5.0–6.0 (lower avoids crunchy noise; raise sparingly).\n\n---\n\nBy default, **negative prompts** are shared with the main image generation.  \nTo use a custom one, connect a new **\"CLIP Text Encode (Prompt)\"** to the \"negative\" connection in the Detailer inside the  `\"Detailer\"` group.\n"
+      ],
+      "color": "#222",
+      "bgcolor": "#000",
+      "shape": 1
+    },
+    {
+      "id": 245,
+      "type": "ShowText|pysssss",
+      "pos": [
+        2700,
+        810
+      ],
+      "size": [
+        510,
+        440
+      ],
+      "flags": {
+        "collapsed": false
+      },
+      "order": 129,
+      "mode": 0,
+      "inputs": [
+        {
+          "name": "text",
+          "type": "STRING",
+          "link": 11690
+        }
+      ],
+      "outputs": [
+        {
+          "name": "STRING",
+          "shape": 6,
+          "type": "STRING",
+          "links": null
+        }
+      ],
+      "title": "Prompt preview",
+      "properties": {
+        "cnr_id": "comfyui-custom-scripts",
+        "ver": "9f7b3215e6af317603056a9a1666bf6e83e28835",
+        "Node name for S&R": "ShowText|pysssss",
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [
+        "masterpiece, best quality, absurdres, amazing quality, vslinxbleachtybw, inoue orihime, large breasts, brown eyes, long hair, straight hair, female, mature female, 1girl, solo, breasts, looking at viewer, blush, smile, cowboy shot, sleeveless, pants, sweater, hand on hip, v, turtleneck, denim, jeans"
+      ],
+      "shape": 1
+    },
+    {
+      "id": 468,
+      "type": "MarkdownNote",
+      "pos": [
+        2300,
+        810
+      ],
+      "size": [
+        390,
+        440
+      ],
+      "flags": {},
+      "order": 90,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [],
+      "title": "What are these nodes?",
+      "properties": {
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [
+        "### Debug Section\n\nThe **\"Prompt preview\"** node displays the complete prompt used during image generation, this includes your start & end quality prompts if activated. \n\n--- \n\nYou can open the body-part previews by clicking the rectangle symbol next to their name. They show the improved part. <br>\nIf the whole image is in the preview it means that the Detailer is disabled, no changes have been made. <br>\nIf the preview is a black rectangle it means the Ultralytics detection model has not found any matches. <br>\nYou might choose a different detection model or change settings in the detailer, see \"Detailer Parameters\"-Note to the left. You can find the Detailers in the \"Detailer\"-Group.\n\n---\n\n**\"ControlNet Pose Preview\"** shows the pose that is used from ControlNet. If you have ControlNet deactivated it'll just show the default image. If you have pre-processing during ControlNet enabled you'll see your pose that was generated through that here.\n\n--- \n\n**Pre-HiRes Fix** displays a preview of your image before the HiRes-Fix process is applied."
+      ],
+      "color": "#222",
+      "bgcolor": "#000",
+      "shape": 1
+    },
+    {
+      "id": 407,
+      "type": "PreviewImage",
+      "pos": [
+        1780,
+        810
+      ],
+      "size": [
+        250,
+        340
+      ],
+      "flags": {
+        "collapsed": false
+      },
+      "order": 135,
+      "mode": 0,
+      "inputs": [
+        {
+          "name": "images",
+          "type": "IMAGE",
+          "link": 13476
+        }
+      ],
+      "outputs": [],
+      "title": "ControlNet Pose Preview",
+      "properties": {
+        "cnr_id": "comfy-core",
+        "ver": "0.3.33",
+        "Node name for S&R": "PreviewImage",
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [],
+      "color": "#233",
+      "bgcolor": "#355",
+      "shape": 1
+    },
+    {
+      "id": 532,
+      "type": "PreviewImage",
+      "pos": [
+        2040,
+        810
+      ],
+      "size": [
+        250,
+        340
+      ],
+      "flags": {
+        "collapsed": false
+      },
+      "order": 139,
+      "mode": 0,
+      "inputs": [
+        {
+          "name": "images",
+          "type": "IMAGE",
+          "link": 11123
+        }
+      ],
+      "outputs": [],
+      "title": "Pre-HiRes Fix",
+      "properties": {
+        "cnr_id": "comfy-core",
+        "ver": "0.3.27",
+        "Node name for S&R": "PreviewImage",
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [],
+      "shape": 1
+    },
+    {
+      "id": 365,
+      "type": "Label (rgthree)",
+      "pos": [
+        -1260,
+        -410
+      ],
+      "size": [
+        214.8000030517578,
+        24
+      ],
+      "flags": {
+        "allow_interaction": false,
+        "pinned": true
+      },
+      "order": 91,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [],
+      "title": "Manual / Mini-Guide",
+      "properties": {
+        "fontSize": 24,
+        "fontFamily": "Arial",
+        "fontColor": "#ffffff",
+        "textAlign": "left",
+        "backgroundColor": "transparent",
+        "padding": 0,
+        "borderRadius": 0,
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "color": "#fff0",
+      "bgcolor": "#fff0"
+    },
+    {
+      "id": 366,
+      "type": "Label (rgthree)",
+      "pos": [
+        -1260,
+        -400
+      ],
+      "size": [
+        480.6000061035156,
+        24
+      ],
+      "flags": {
+        "allow_interaction": false,
+        "pinned": true
+      },
+      "order": 92,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [],
+      "title": "____________________________________",
+      "properties": {
+        "fontSize": 24,
+        "fontFamily": "Arial",
+        "fontColor": "#ffffff",
+        "textAlign": "left",
+        "backgroundColor": "transparent",
+        "padding": 0,
+        "borderRadius": 0,
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "color": "#fff0",
+      "bgcolor": "#fff0"
+    },
+    {
+      "id": 628,
+      "type": "MarkdownNote",
+      "pos": [
+        -1260,
+        -340
+      ],
+      "size": [
+        480,
+        2310
+      ],
+      "flags": {
+        "pinned": true
+      },
+      "order": 93,
+      "mode": 0,
+      "inputs": [],
+      "outputs": [],
+      "title": "How to use",
+      "properties": {
+        "ue_properties": {
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
+        }
+      },
+      "widgets_values": [
+        "## First Row\n\n#### Sampler Settings\nThese settings will be used during all steps of the process. The Batch Size decides how many pictures will be created at once. <br>\nYou can change the Resolution more accurately by double clicking the height and width values and entering a value manually. The default settings are my personal preferences. <br>\nThe ControlNet Strength, ControlNet Start Percent & ControlNet End Percent only apply if you're using ControlNet, the same applies to the IPAdapter Style Strength & IPAdapter Composition Strength which only are applied if you're using either of them.\n\n---\n\n\n#### General Function Control\nIn the \"General Function Control\"-Group you can select if you want to see the image selection, when doing batches of image, to continue with the process as well as choose if you want to upscale your output image, as well as the factor by which you want to upscale. <br>\nYou can also enable HiRes-Fix, which resamples the upscaled image with a low denoise value to repaint it for higher resolution and quality. <br>\nThe Hi-Res Fix Denoise value is only applied when Hi-Res Fix is enabled and determines how much of the original image is overwritten. A value between 0.25 and 0.35 is recommended. <br>\nIt’s recommended to use \"Color Fix\" alongside it to preserve the original colors, as resampling can sometimes wash out contrast. <br>\nLastly you can select Start and/or End quality prompts to seperate your prompt so you don't have to always type/copy the quality tags of checkpoints/loras. You can see a preview of the full prompt in the Debug section of this workflow.\n\n---\n\n#### IPAdapter / ControlNet\nHere you select which functions of the IPAdapter/ControlNet you want to activate. There is always one Low VRAM option to activate ALONGSIDE the function counterpart. The Low VRAM Option will always downsize the input image for these functions to 512px on it's smallest side, while keeping aspect ratio, to ensure lower vram usage. <br>\nThis also impacts results so only use it if you have 12GB VRAM or less or if you want faster generation and don't mind a decrease in quality.\n\n---\n\n#### LoRA's\nIn this group you can add as many LoRA's to the general process as you want. These LoRA's will be applied to the whole process including detailing, hires fix, detailers etc. to keep consistent styles/characters across your generation. Simply click the \"+ Add Lora\"-Button in the Node and select your LoRA. You can toggle single ones or all of them by the switch button in front of the names/at the top respectively. To remove LoRA's simply rightclick on their name and click \"Remove\".\n\n---\n\n#### Detailer Control\nIn the \"Detailer Control\"-Group you can select which Detailers to run, what manual body part prompts to activate as well as one \"Denoise\"-Slider and one prompt field for each body part that has a detailer. <br> The prompt field is there to let you define what should be inpainted into the detail area while the denoise slider controls how much of the original shape, form, and color will be replaced. <br> A high value will completely overwrite the area while a lower value will preserve the original form (and color depending on how low) and just enhance it at a higher resolution. <br> If the anatomy already looks good and you only want to improve quality, a denoise value of 0.25 to 0.35 is recommended. If the anatomy is off - like extra fingers - you can increase it to 0.5 or higher and see if the results improve. <br> The higher your denoise value - the higher impact your prompt has. You can also leave the prompt deactivated (At the top) and only use a low denoise value to simply detail the area in a higher resolution without changing too much of what's being shown. <br> As a general rule for the denoise setting you can remember that the higher the denoise value, the more the detailer will ignore what's already in that area. \n\n---\n\n#### IPAdapter (Optional)\nIPAdapter let's you copy the style of an image simply by providing an IPAdapter Model & a Clip Model. <br>\nIt basically works as a 1-Image-LoRA that injects itself into the Model and applies the style of the image like a LoRA. The composition part works similar to ControlNet where the general composition is being copied by the image. <br>\nYou can select an image for the style and an image for the composition individually in the \"IPAdapter (Optional)\"-Group and then set the strength of their influence in the \"Sampler Settings\"-Group. <br>\nIn general if you're just trying to copy the style of one image and the position of another image i'd recommend using ControlNet for the pose and IPAdapter for the style. <br>\nBe aware that you still have to prompt correctly with IPAdapter, otherwise the concept or pose of the input image will heavily influence the final image(if you're not using ControlNet or a Composition image).\n\n---\n\n#### ControlNet (Optional)\nYou can either provide a full image in the \"Pre-Process image to Pose\" image selector or a ControlNet pose image in the \"Load ControlNet Pose\" image selector at the bottom. <br>\nThe ControlNet image has to match the ControlNet model in the node inside of the \"ControlNet Model\"-Node at the top.<br>\nIf you want to imitate the pose of an image and have selected a image in the \"Pre-Process image to Pose\"-Node inside the \"ControlNet\"-Group you have to enable the \"Use Pre-Processor\"-Node in the \"IPAdapter / ControlNet\"-Group.<br>\nAfter selecting a pre-processing model at the bottom of the \"Model Backend\"-Group you can see a preview of the generated/used pose in the \"ControlNet Pose Preview\"-Node inside the \"Debug\"-Group. <br>\n\nYou can find an in-depth guide about what ControlNet is, what it does and how each model works in [this](https://stable-diffusion-art.com/controlnet/) guide. (It's for A1111WebUI but you'll understand)\n\n---\n\n#### Prompts\nHere you fill out your positive & negative prompts for the image generation. If you have selected Start-/End quality prompts you can also fill them out here. You see a preview of your full positive prompt in the Debug section. <br>\nBoth positive and negative prompts also support dynamic prompts including files and wildcards. To see the full documentation on what you can do with that check the node-documentation [here](https://github.com/ltdrdata/ComfyUI-extension-tutorials/blob/Main/ComfyUI-Impact-Pack/tutorial/ImpactWildcard.md). <br>\nIf you want to use dynamic prompts with files they'll have to be in the respective folder BEFORE you start comfyui to be recognized, refreshing alone will not load them.\n\n---\n\n#### Before & After\nSimply gives you a preview of your image as it processes. The left node shows your image after upscaling/hires fix (if either or both are activated) while the right shows you your image after detailing. To see a preview after upscaling but before the hires fix check the \"Pre-HiRes Fix\"-Node in the Debug-Group below this node.\n\n---\n\n## Second Row\n\n#### Model Backend\nIn the **Model Backend** group, choose your Checkpoint, VAE and Upscale Model.<br>\nIf you're using a v-prediction model, make sure to enable \"Is V-Pred Model\".<br>\nIf you have a checkpoint that uses a baked in VAE you can disable the \"Seperate VAE\"-Switch to use the in-built VAE of the checkpoint.\n\nOnly use \"Patch Sage Attention\" if you know what you do. You need to install triton on your PC which can be a lengthy and troublesome undertaking while only giving you a miniscule speed boost of maybe 2-3 seconds per image. You can find a guide for it [here](https://www.reddit.com/r/comfyui/comments/1hn32jc/step_by_step_video_tutorial_on_installing/).\n\n---\n\n#### Refiner Backend\nHere you can select if you want to use the normal Sampler or the Refiner Sampler - followed by options to add a refiner checkpoint, a slider for the steps that should be spent on the base checkpoint and LoRA's that'll be exclusively used during the 2nd sampling phase done with the refiner. <br>\nIf you're using a v-prediction model, make sure to enable \"Is V-Pred Model\".<br>\nIf you don't know what a refiner is, check the \"Refiner\"-Note to the bottom right of the Refiner Backend.\n\n---\n\n#### Detection Models\nHere you select your ultralytics detection models that are trained specifically to find certain body parts and mask them so the detailer can inpaint these areas. You can find some recommendations for these in the \"Recommended Ultralytics Models\"-Node to the right or on civitai [here](https://civitai.com/search/models?modelType=Detection&sortBy=models_v9). Ultralytics are not model specific, so even if it's listed as SD1 you can use them for every other checkpoint.\n\n---\n\n#### Detailer LoRA's\nSimilar to the LoRA selection in the first Row you can select as man LoRAs as you want here. Each one of them is only injected into the corresponding detailer. Therefore you can use LoRAs that are specifically made for certain body parts. Some recommendations are in the \"Recommended Detailer LoRA's\"-Note to the right directly under the \"Detailer LoRA's\"-Group.\n\n---\n\n#### Detailer\nThis is where the magic happens - here the ultralytics models are being used to find your areas, mask them and then inpaint them using your set values. To find out more and some recommendations read the note to the left of it and underneath it.\n\n---\n\n#### Debug\nHere you will find some helpers throughout the workflow that give you some background information and might help you find problems during your generation if you're running into issues.<br>\nThere is text node that gives you a preview of your full prompt including all of your optional prompts combined as well as a preview for a Pre-HiRes Fix version of your image (if HiRes Fix is activated) and a preview of the ControlNet Image that has been loaded. <br>\nIf you're using a Pre-Processor this is where you'll see the finished processed pose for your image generation. <br>\nFurthermore there are multiple nodes you can open, by clicking the rectangle left to their name, for each body part that'll show you the new inpainted detailed bodypart. <br>\nIf the preview is the full image, the detailer was not activated. If the preview is a black rectangle it means that the ultralytics model could not find what it was trained on."
+      ],
+      "color": "#222",
+      "bgcolor": "#000",
+      "shape": 1
+    },
+    {
+      "id": 591,
+      "type": "MarkdownNote",
+      "pos": [
+        -70,
+        1300
       ],
       "size": [
-        310,
-        350
+        700,
+        220
       ],
-      "flags": {},
+      "flags": {
+        "pinned": true
+      },
       "order": 94,
       "mode": 0,
       "inputs": [],
-      "outputs": [
-        {
-          "name": "IMAGE",
-          "type": "IMAGE",
-          "links": [
-            544,
-            723,
-            12707
-          ]
-        },
-        {
-          "name": "MASK",
-          "type": "MASK",
-          "links": null
-        }
-      ],
-      "title": "Pre-Process image to Pose",
+      "outputs": [],
+      "title": "Refiner",
       "properties": {
-        "cnr_id": "comfy-core",
-        "ver": "0.3.27",
-        "Node name for S&R": "LoadImage",
         "ue_properties": {
-          "version": "7.0.1",
-          "widget_ue_connectable": {}
+          "widget_ue_connectable": {},
+          "version": "7.0.1"
         }
       },
       "widgets_values": [
-        "example.png",
-        "image"
+        "## ← Explanation Refiner\nIf you’re using refiner, the image is generated with two different checkpoints, which also means it requires more VRAM. The first checkpoint creates the bulk of the image, including composition and structure, while the second checkpoint refines and touches up details. The slider “steps spent on base” determines how many steps are allocated to the first checkpoint, while the remaining steps (up to the total steps set in Sampler Settings) are spent with the refiner. Usually, a specific refiner checkpoint is loaded just for that second phase.\n\nIf you combine a refiner with hires fix, keep in mind that only the first checkpoint is used for the hires pass due to technical limitations — so if you’re trying to apply a second checkpoint for style, it’s best to use a very low denoise value (around 0.1–0.15) for the hires fix. With the rise of hires fix and upscaling, refiners have become mostly obsolete, since these methods achieve equal or better results in a more flexible and efficient way."
       ],
-      "color": "#233",
-      "bgcolor": "#355",
+      "color": "#222",
+      "bgcolor": "#000",
       "shape": 1
     },
     {
-      "id": 333,
-      "type": "LoadImage",
+      "id": 592,
+      "type": "MarkdownNote",
       "pos": [
-        1510,
-        370
+        640,
+        1300
       ],
       "size": [
-        310,
-        350
+        340,
+        570
       ],
-      "flags": {},
+      "flags": {
+        "collapsed": false,
+        "pinned": true
+      },
       "order": 95,
       "mode": 0,
       "inputs": [],
-      "outputs": [
-        {
-          "name": "IMAGE",
-          "type": "IMAGE",
-          "links": [
-            704,
-            722,
-            741,
-            12706
-          ]
-        },
-        {
-          "name": "MASK",
-          "type": "MASK",
-          "links": null
-        }
-      ],
-      "title": "Load ControlNet Pose",
+      "outputs": [],
+      "title": "Recommended Ultralytics Models",
       "properties": {
-        "cnr_id": "comfy-core",
-        "ver": "0.3.27",
-        "Node name for S&R": "LoadImage",
         "ue_properties": {
           "version": "7.0.1",
           "widget_ue_connectable": {}
         }
       },
       "widgets_values": [
-        "example.png",
-        "image"
+        "#### FACE\n- [Mask aDetailer - Face detailer for Eyes, Eyebrows, and Nose](https://civitai.com/models/1222100/mask-adetailer-face-detailer-for-eyes-eyebrows-and-nose)\n- [ADetailer Anime Girl Face Segmentation / 漫画娘 顔検知](https://civitai.com/models/1076050/adetailer-anime-girl-face-segmentation)\n\n#### EYES\n- [Eyes detection (Adetailer)](https://civitai.com/models/150925/eyes-detection-adetailer)\n- [Eyeful | Robust eye detection for Adetailer / ComfyUI](https://civitai.com/models/178518/eyeful-or-robust-eye-detection-for-adetailer-comfyui)\n- [PitEyeDetailer](https://huggingface.co/camenduru/ultralytics/blob/main/PitEyeDetailer-v2-seg.pt)\n\n#### LIPS / Mouth\n- [ADetailer (After Detailer) Lips Model](https://civitai.com/models/142240/adetailer-after-detailer-lips-model)\n- [ADetailer 2d mouth detection [yolo/segmentation]](https://civitai.com/models/1306938/adetailer-2d-mouth-detection-yolosegmentation)\n\n\n#### NOSE\n- [ADetailer (Nose)](https://www.mediafire.com/file/f6buda8p06cosn6/adetailerNose_.pt/file) ([originally](https://civitai.com/models/1232431/adetailer-nose) from user [vortumanko](https://civitai.com/user/vortumanko) but taken offline by owner, works best with anthro noses, for everything else i recommend one of the face detailers above)\n\n#### HANDS\n- [hand_yolov8s.pt](https://huggingface.co/Bingsu/adetailer/blob/main/hand_yolov8s.pt)\n- [hand_yolov9c.pt](https://huggingface.co/Bingsu/adetailer/blob/main/hand_yolov9c.pt)\n\n#### NIPPLES\n- [Nipple Adetailer for Anime Girls](https://civitai.com/models/1132590/nipple-adetailer-for-anime-girls)\n- [ADetailer Nipples model](https://civitai.com/models/490259/adetailer-nipples-model)\n\n\n#### VAGINA\n- [Anime NSFW Detection/ADetailer All-in-One](https://civitai.com/models/1313556/anime-nsfw-detectionadetailer-all-in-one)\n- [Pussy Adetailer](https://civitai.com/models/150234/pussy-adetailer)\n\n\n#### PENIS\n- [Cock and Ball Detection 2D edition (ADetailer)](https://civitai.com/models/310687/cock-and-ball-detection-2d-edition-adetailer)\n"
       ],
-      "color": "#233",
-      "bgcolor": "#355",
+      "color": "#222",
+      "bgcolor": "#000",
       "shape": 1
     },
     {
-      "id": 319,
-      "type": "Fast Bypasser (rgthree)",
+      "id": 593,
+      "type": "MarkdownNote",
       "pos": [
-        -240,
-        -40
+        990,
+        1300
       ],
       "size": [
-        320,
-        180
+        290,
+        570
       ],
-      "flags": {},
-      "order": 133,
+      "flags": {
+        "collapsed": false,
+        "pinned": true
+      },
+      "order": 96,
       "mode": 0,
-      "inputs": [
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Image Selection",
-          "type": "*",
-          "link": 14765
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Upscaling",
-          "type": "*",
-          "link": 14766
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Hi-Res Fix",
-          "type": "*",
-          "link": 14767
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Color Fix for Hi-Res",
-          "type": "*",
-          "link": 14768
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "Start quality prompt (Optional)",
-          "type": "*",
-          "link": 14769
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "End quality prompt (Optional)",
-          "type": "*",
-          "link": 14770
-        },
-        {
-          "dir": 3,
-          "label": " ",
-          "name": "",
-          "type": "*",
-          "link": null
-        }
-      ],
-      "outputs": [
-        {
-          "dir": 4,
-          "label": " ",
-          "name": "OPT_CONNECTION",
-          "type": "*",
-          "links": null
-        }
-      ],
-      "title": "Process Control",
+      "inputs": [],
+      "outputs": [],
+      "title": "Recommended Detailer LoRA's",
       "properties": {
-        "toggleRestriction": "default",
-        "collapse_connections": true,
         "ue_properties": {
           "version": "7.0.1",
           "widget_ue_connectable": {}
         }
       },
-      "color": "#432",
-      "bgcolor": "#653",
+      "widgets_values": [
+        "#### General Detailer (Can be used for everything)\n- [NoobAI-XL Detailer](https://civitai.com/models/987736?modelVersionId=1147221)\n\n#### General Detailer for V-Pred Models\n- [NoobAI-XL Detailer](https://civitai.com/models/987736?modelVersionId=1209350)\n\n#### Eyes\n- [Eye detail LoRA [Illustrious+FLUX]](https://civitai.com/models/1300857?modelVersionId=1468284)\n\n#### Hands\n- [Hands XL + SD 1.5 + FLUX.1-dev + Pony + Illustrious](https://civitai.com/models/200255?modelVersionId=1464262)\n\n#### Nipples\n- [Nipple LORA for ADetailer / ADetailer用の乳首LORA Anmagine XL 3.1-4.0](https://civitai.com/models/502107\n)\n- [Nipple LORA for ADetailer / ADetailer用の乳首LORA](https://civitai.com/models/493096)\n- [[Illustrious-XL] Nipple LORA for ADetailer / ADetailer用の乳首LORA](https://civitai.com/models/827482)"
+      ],
+      "color": "#222",
+      "bgcolor": "#000",
       "shape": 1
     },
     {
-      "id": 585,
-      "type": "Fast Groups Bypasser (rgthree)",
+      "id": 360,
+      "type": "MarkdownNote",
       "pos": [
-        -440,
-        810
+        -770,
+        1870
       ],
       "size": [
-        350,
-        82
+        370,
+        100
       ],
-      "flags": {},
-      "order": 96,
+      "flags": {
+        "pinned": true
+      },
+      "order": 97,
       "mode": 0,
       "inputs": [],
-      "outputs": [
-        {
-          "name": "OPT_CONNECTION",
-          "type": "*",
-          "links": null
-        }
-      ],
-      "title": "Use Refiner or Normal Sampler?",
+      "outputs": [],
+      "title": "Pose Collections",
       "properties": {
-        "matchColors": "#00ff80",
-        "matchTitle": "",
-        "showNav": false,
-        "showAllGraphs": true,
-        "sort": "position",
-        "customSortAlphabet": "",
-        "toggleRestriction": "max one",
         "ue_properties": {
-          "widget_ue_connectable": {},
-          "version": "7.0.1"
+          "version": "7.0.1",
+          "widget_ue_connectable": {}
         }
       },
-      "color": "#223",
-      "bgcolor": "#335",
+      "widgets_values": [
+        "### Civitai has a large amount of available poses collections you can browse through the Poses filter [here](https://civitai.com/search/models?modelType=Poses&sortBy=models_v9)."
+      ],
+      "color": "#222",
+      "bgcolor": "#000",
       "shape": 1
     }
   ],
@@ -11451,11 +11484,13 @@
         -770,
         1530,
         310,
-        290
+        300
       ],
       "color": "#444",
       "font_size": 24,
-      "flags": {}
+      "flags": {
+        "pinned": true
+      }
     },
     {
       "id": 20,
@@ -11553,8 +11588,8 @@
       "bounding": [
         -450,
         1700,
-        200,
-        120
+        190,
+        130
       ],
       "color": "#444",
       "font_size": 24,
@@ -11568,7 +11603,7 @@
       "bounding": [
         -450,
         1530,
-        200,
+        190,
         160
       ],
       "color": "#444",
@@ -11581,7 +11616,7 @@
       "id": 30,
       "title": "PreProcessor",
       "bounding": [
-        -240,
+        -250,
         1530,
         190,
         160
@@ -11611,10 +11646,10 @@
       "id": 34,
       "title": "IPAdapter Comp",
       "bounding": [
-        -40,
+        -50,
         1700,
-        210,
-        120
+        200,
+        130
       ],
       "color": "#444",
       "font_size": 24,
@@ -11626,10 +11661,10 @@
       "id": 35,
       "title": "IPAdapter Style",
       "bounding": [
-        -240,
+        -250,
         1700,
         190,
-        120
+        130
       ],
       "color": "#444",
       "font_size": 24,
@@ -11641,10 +11676,10 @@
       "id": 37,
       "title": "Style Low VRAM",
       "bounding": [
-        180,
+        160,
         1700,
-        240,
-        120
+        210,
+        130
       ],
       "color": "#444",
       "font_size": 24,
@@ -11656,10 +11691,10 @@
       "id": 38,
       "title": "Comp Low VRAM",
       "bounding": [
-        430,
+        380,
         1700,
-        220,
-        120
+        250,
+        130
       ],
       "color": "#444",
       "font_size": 24,
@@ -11671,7 +11706,7 @@
       "id": 39,
       "title": "ControlNet - Low VRAM",
       "bounding": [
-        380,
+        360,
         1530,
         270,
         160
@@ -11686,9 +11721,9 @@
       "id": 40,
       "title": "HiRes Fix",
       "bounding": [
-        -40,
+        -50,
         1530,
-        210,
+        200,
         160
       ],
       "color": "#444",
@@ -11701,7 +11736,7 @@
       "id": 41,
       "title": "HiRes Color Fix",
       "bounding": [
-        180,
+        160,
         1530,
         190,
         160
@@ -15673,7 +15708,7 @@
               "widget_ue_connectable": {}
             },
             "widgets_values": [
-              "noobAI\\noobaiXLControlnet_openposeModel.safetensors"
+              "noobAI\\noobaiXLControlnet_epsCanny.safetensors"
             ],
             "color": "#223",
             "bgcolor": "#335",
@@ -15722,7 +15757,7 @@
               "widget_ue_connectable": {}
             },
             "widgets_values": [
-              "OpenposePreprocessor"
+              "PyraCannyPreprocessor"
             ],
             "color": "#223",
             "bgcolor": "#335",
@@ -19301,10 +19336,10 @@
     ],
     "frontendVersion": "1.26.6",
     "ds": {
-      "scale": 0.7898148148148149,
+      "scale": 0.7898148148148154,
       "offset": [
-        1081.4193095020487,
-        -712.6436107854613
+        971.1046571546652,
+        163.60077718167463
       ]
     }
   },

workflows/TXT2IMG/v4.4/todo.md

@@ -1 +0,0 @@
-- update how to note & debug note