text stringlengths 116 1.21k |
|---|
<s>[INST] Where is the first aid kit located in the car? [/INST] The first aid kit is kept inside the glove box compartment. |
<s>[INST] What does the first aid kit contain? [/INST] The kit contains items that can be used in case of minor injuries only. |
<s>[INST] Are there any specific instructions regarding the first aid kit? [/INST] Note: Examine contents of the first aid kit periodically and replenish consumed or expired items. |
<s>[INST] Where is the advance warning triangle kept in the car? [/INST] An advance warning triangle is kept in the luggage compartment beside the spare wheel. |
<s>[INST] How should the advance warning triangle be used in case of a vehicle breakdown or emergency? [/INST] Use the advance warning triangle to warn approaching traffic in case of vehicle breakdown or emergency, where your vehicle could become a potential traffic hazard. When you press the hazard warning switch, all turn signal lamps will start to blink. Keep the warning triangle at an approximate distance of 50-150 meters behind your vehicle in the same lane of traffic. The reflecting side of the triangle should face the oncoming traffic and it should be free from any obstacles. Remove the advance warning triangle carefully from the bag and assemble it. Refer to the instructions given on the bag. |
<s>[INST] Are there any specific instructions for storing the advance warning triangle after use? [/INST] Note: After using the warning triangle tie it firmly and keep it inside the bag to avoid rattling noise. |
<s>[INST] How do you access the spare wheel in the car? [/INST] - To access the spare wheel, lift the carpet up.
- After lifting, hold the carpet to access the spare wheel.
- Remove the Toolkit bag.
- To remove the spare wheel, unscrew and remove the retaining bolt. |
<s>[INST] What steps are involved in removing and replacing the spare wheel? [/INST] - To access the spare wheel, lift the carpet up.
- After lifting, hold the carpet to access the spare wheel.
- Remove the Toolkit bag.
- To remove the spare wheel, unscrew and remove the retaining bolt. |
<s>[INST] Are there any warnings or speed limitations associated with using the spare wheel? [/INST] Warning: "80 km/h" or "50 mph" is the maximum speed you are permitted to drive with this tyre. Never drive faster than 80 km/h (50 mph). Do not accelerate quickly, brake suddenly, or drive at high speed through bends. After fitting the temporary spare wheel, the tyre pressure must be checked as soon as possible. |
<s>[INST] What are the steps involved in changing a flat tire on the vehicle? [/INST] Changing Flat Tyre:
- Loosen the nuts (as indicated) on the wheel in diagonal sequence. Do not unscrew the nuts completely before raising the vehicle using the jack.
- Assemble the Jack handle and wheel spanner (as shown in fig.)
- Position the jack vertically and raise it by turning the jack handle clockwise until the jack sits completely on the specified point and the base of the jack lies evenly on the ground.
- The jacking points are indicated on the sill cover of the vehicle.
- Continue to raise the jack slowly and smoothly until the tyre clears the ground. Do not raise the vehicle more than necessary.
- Remove wheel nuts with the help of wheel spanner and take out flat tyre.
- Roll the spare wheel into position and align the holes in the wheel studs.
- Tighten each nut by hand until the wheel is securely seated on the hub.
- Lower the jack completely then tighten the wheel nuts diagonally in opposite sequence one by one using wheel spanner.
- Press fit the wheel cover back (if equipped).
- Restore all the tools and jack at their respective locations.
- Place the flat tyre at the spare wheel location. |
<s>[INST] How should the jack be positioned and used? [/INST] Changing Flat Tyre:
- Loosen the nuts (as indicated) on the wheel in diagonal sequence. Do not unscrew the nuts completely before raising the vehicle using the jack.
- Assemble the Jack handle and wheel spanner (as shown in fig.)
- Position the jack vertically and raise it by turning the jack handle clockwise until the jack sits completely on the specified point and the base of the jack lies evenly on the ground.
- The jacking points are indicated on the sill cover of the vehicle.
- Continue to raise the jack slowly and smoothly until the tyre clears the ground. Do not raise the vehicle more than necessary.
- Remove wheel nuts with the help of wheel spanner and take out flat tyre.
- Roll the spare wheel into position and align the holes in the wheel studs.
- Tighten each nut by hand until the wheel is securely seated on the hub.
- Lower the jack completely then tighten the wheel nuts diagonally in opposite sequence one by one using wheel spanner.
- Press fit the wheel cover back (if equipped).
- Restore all the tools and jack at their respective locations.
- Place the flat tyre at the spare wheel location. |
<s>[INST] What precautions should be taken when using the jack? [/INST] Note: The jack is designed only to raise and hold the vehicle for a short time while a wheel is being changed. It is not suited for performing maintenance work under the vehicle. Use the jack on level, hard ground. Avoid changing the wheel on uphill and downhill slopes. Chock the wheels if the deflated wheel needs to be changed on a slope/ghat area. Before raising the vehicle, secure it from rolling away by applying the parking brake. Do not use wooden blocks or similar objects as a jack underlay. Do not place your hands and feet or lie under the raised vehicle when it is supported by a jack. Do not run the engine when the vehicle is supported by the jack and never allow passengers to remain in the vehicle. Do not place wheel nuts in sand or on a dirty surface. Do not apply oil or grease on them. |
<s>[INST] What precautions should be taken when jump starting your car? [/INST] JUMP STARTING YOUR CAR:
- Use only a battery of the same rating & capacity to jump start your vehicle. Position the booster battery close to your vehicle so that the jump leads will reach both batteries.
- When using a battery of another vehicle, do not let the vehicles touch. Apply the parking brake firmly and keep the gearshift lever in neutral.
- Turn off all vehicle accessories, except those necessary for safety like hazard warning lamps. |
<s>[INST] How should you position the booster battery when jump starting your car? [/INST] JUMP STARTING YOUR CAR:
- Use only a battery of the same rating & capacity to jump start your vehicle. Position the booster battery close to your vehicle so that the jump leads will reach both batteries. |
<s>[INST] How should you connect the jump leads when jump starting your car? [/INST] JUMP STARTING YOUR CAR:
- Use only a battery of the same rating & capacity to jump start your vehicle. Position the booster battery close to your vehicle so that the jump leads will reach both batteries.
- When using a battery of another vehicle, do not let the vehicles touch. Apply the parking brake firmly and keep the gearshift lever in neutral.
- Turn off all vehicle accessories, except those necessary for safety like hazard warning lamps.
- If your vehicle is equipped with Battery sensor, then do not connect your jump start cable lead directly on the Sensor surface. Connect only on the negative cable surface as shown in the image. After the jump start event, IAC function will be restored only when the Vehicle is parked idle for 3-4 Hours. |
<s>[INST] What kind of gas does the battery generate during normal operation? [/INST] During normal operation, the battery generates gas which is explosive in nature. |
<s>[INST] What can cause the battery to explode? [/INST] A spark or open flame can cause the battery to explode causing very serious injuries. |
<s>[INST] What precautions should be taken to prevent battery explosion? [/INST] Keep all sparks, open flames and smoking materials away from the battery. |
<s>[INST] What does the battery contain that is dangerous? [/INST] The battery contains sulphuric acid (electrolyte) which is poisonous and highly corrosive in nature. |
<s>[INST] What are the risks of getting battery electrolyte in your eyes or on your skin? [/INST] Getting electrolyte in your eyes or on the skin can cause severe burns. |
<s>[INST] What protective measures should be taken when handling the battery? [/INST] Wear protective clothing and a face shield or have a skilled technician to do the battery maintenance. |
<s>[INST] Is water dripping below the car normal? [/INST] Yes, water dripping below the car is normal. This is due to the usage of the air conditioning system. |
<s>[INST] When should tyre pressure be measured? [/INST] Tyre pressure should always be measured in cold conditions. |
<s>[INST] How often should you check tyre pressure and condition? [/INST] Do a check of tyre pressure and condition after every 15 days, including the spare tyre. |
<s>[INST] Should you apply any external coating solution on vehicle glazing or glasses? [/INST] We strongly recommended to avoid applying any external coating solution on vehicle glazing or glasses. |
<s>[INST] Is it advisable to apply external coating solution on the Front & Rear Windscreen Glass? [/INST] We strongly recommended to avoid applying any external coating solution on the Front & Rear Windscreen Glass. |
<s>[INST] Why should you avoid applying external coating solution on the vehicle's Front & Rear Windscreen Glass? [/INST] This may affect the Wiper performance & lead to poor visibility while using Wipers in wet condition/Rainy season. |
<s>[INST] I noticed water dripping from the underside of my vehicle. Is this normal? [/INST] Yes, condensate may drip from the underside of the vehicle when it is in cooling mode. Traces of water on the ground are normal and are not a sign of leakage or malfunction. |
<s>[INST] I see traces of water on the ground under my car. Should I be concerned about a leak or malfunction? [/INST] No, traces of water on the ground are normal and are not a sign of leakage or malfunction. This happens when the vehicle is in cooling mode. |
<s>[INST] My vehicle is not cooling down quickly. What can I do to speed up the cooling process? [/INST] Ventilate the vehicle for a brief period during warm weather. This will speed up the cooling process and the desired vehicle interior temperature will be reached quickly. |
<s>[INST] How can I improve the cooling efficiency of my vehicle's air conditioning system during warm weather? [/INST] Ventilate the vehicle for a brief period during warm weather. This will speed up the cooling process and the desired vehicle interior temperature will be reached quickly. |
<s>[INST] Can I cover the air vents or air intake grills in the vehicle interior? [/INST] Never cover the air vents or air intake grills in the vehicle interior. |
<s>[INST] Why shouldn't I cover the air vents or air intake grills in my vehicle? [/INST] Covering the air vents or air intake grills in the vehicle interior can hinder the air conditioning system's performance. |
<s>[INST] My AC is not giving the best performance after not being used for a long period. What should I do? [/INST] If the AC is not used for a long period, such as during winter, it may not give the best performance when you start using it again. Operate the AC at least once a month to maintain optimum performance. |
<s>[INST] How often should I operate my AC to maintain its performance if I don't use it frequently? [/INST] Operate the AC at least once a month to maintain optimum performance. |
<s>[INST] What should I do to improve AC performance when starting the vehicle after a long duration? [/INST] Follow the procedure for better AC performance: Start the vehicle and allow the engine to idle for 2-3 minutes with the AC off. |
<s>[INST] What is the procedure for starting the vehicle after a long duration to ensure better AC performance? [/INST] Start the vehicle and allow the engine to idle for 2-3 minutes with the AC off. Then, switch the AC on and run it for another 2-3 minutes while the engine idles. |
<s>[INST] How long should I let the engine idle before turning on the AC after the vehicle has not been used for a long time? [/INST] Allow the engine to idle for 2-3 minutes with the AC off before turning on the AC. |
<s>[INST] What should I do after letting the engine idle to ensure the AC performs well after not being used for a long time? [/INST] Switch the AC on and run it for another 2-3 minutes while the engine idles. This circulates the refrigerant and oil to lubricate the internal parts of the air-conditioning system. |
<s>[INST] Why should I run the AC for a few minutes after letting the engine idle when starting the vehicle after a long duration? [/INST] Running the AC for a few minutes after letting the engine idle circulates the refrigerant and oil to lubricate the internal parts of the air-conditioning system. |
<s>[INST] My front doors are not locking from the outside. How do I fix this? [/INST] If the front doors are not locking from the outside, ensure the key is properly inserted and turned. If the lock mechanism is jammed or damaged, consult a professional mechanic for repair. |
<s>[INST] I have an issue with the door lock lever inside the vehicle. How do I fix this? [/INST] If the door lock lever inside the vehicle is not working, it could be due to a mechanical issue. Try lubricating the lever with a suitable lubricant. If the problem continues, have a professional mechanic inspect and repair the lock. |
<s>[INST] My central locking system is malfunctioning and won't lock all the doors. What should I do? [/INST] If the central locking system is malfunctioning, check if the key is correctly inserted and turned in the driver's door. Check the fuse for the central locking system and inspect the wiring and connections. If the issue persists, the central locking actuator or control unit may need professional repair. |
<s>[INST] How do I adjust the sun visors to prevent sun glare? [/INST] To adjust the sun visors, lower them to protect your eyes from bright sunlight. You can also move the sun visors sideways towards the door for additional coverage. |
<s>[INST] Where can I find the vanity mirror in my vehicle? [/INST] The vanity mirror is provided on the co-driver's sun visor. |
<s>[INST] How do I adjust the outer rear view mirror? [/INST] The outer rear view mirror can be adjusted by hand to the desired position. In some versions, it can be adjusted using a lever inside the door. |
<s>[INST] How do I fold the outer rear view mirror for narrow passages? [/INST] To fold the outer rear view mirror backwards for convenience when driving through narrow passages, simply push the mirror backwards by hand. |
<s>[INST] Where is the inner rear view mirror located and how do I use its anti-glare feature? [/INST] The inner rear view mirror is located inside the cab between the sun visors. In some versions, an additional adjustable anti-glare rear view mirror is provided. It has two positions: normal and anti-glare. Use the anti-glare position only if necessary, as it reduces rear view clarity considerably. |
<s>[INST] Is there a rear view mirror on the co-driver's door? [/INST] In some versions of the vehicle, an outer rear view mirror is also provided on the co-driver's door. |
<s>[INST] How do I adjust the driver's seat for a comfortable driving position? [/INST] To adjust the driver's seat, lift the handle to slide the seat forward or backward. Once in the desired position, push down the handle to lock the seat. To adjust the backrest, turn the lever and release it to lock the backrest in the desired position. Do not adjust the seat while driving. |
<s>[INST] What features are available for the driver's and co-driver's seats in terms of comfort? [/INST] The driver's and co-driver's seats are adjustable in forward and backward directions. In some versions, both seats also include lumbar support for maximum driving comfort. |
<s>[INST] How do I fold the middle seat to create more luggage space? [/INST] To fold the middle seat for more luggage space, release the latch on the backrest of the 60:40 split seat and fold the seat. You can then somersault the folded middle seat forward. To fix the seat back upright, simply push it back into position until it locks automatically. |
<s>[INST] How do I fold the rear seats to carry bulkier baggage? [/INST] To fold the rear seats for carrying bulkier baggage, lift the seat squab and hold it against the backrest. Engage the strap with the hook on the seat squab and then fold the seat stand. To open the seats, follow the reverse order, ensuring the stand is fully opened and vertical to the floor. |
<s>[INST] What type of seat belts are provided for the driver, co-driver, and middle seat passengers? [/INST] The vehicle is fitted with three-point seat belts for the driver, co-driver, and passengers on the middle seat for extra safety. |
<s>[INST] How do I tighten the seat belt? [/INST] To tighten the seat belt, pull the free end of the webbing through the adjuster until the required adjustment is achieved. |
<s>[INST] What should I do if the seat belt warning alarm and visual indication are activated? [/INST] If the seat belt warning alarm and visual indication are activated, it means the seat belt is not fastened. Insert the belt tongue into the buckle until you hear a positive click to ensure it is correctly fastened. |
<s>[INST] How do I fasten the seat belt correctly? [/INST] To fasten the seat belt correctly, insert the belt tongue into the buckle until you hear a positive locking 'click,' which indicates correct and safe assembly. |
<s>[INST] How do I release the seat belt? [/INST] To release the seat belt, press the release button. The tongue will be ejected clear of the locking mechanism within the buckle. |
<s>[INST] How do I fasten the lap belt for the middle passenger of the front bench seat? [/INST] To fasten the lap belt for the middle passenger of the front bench seat, adjust the length of the belt to suit convenience, then insert the belt tongue into the buckle until you hear a positive click, indicating correct assembly. |
<s>[INST] How do I release the lap belt for the middle passenger? [/INST] To release the lap belt for the middle passenger, press the release button. The tongue will be ejected from the buckle. |
<s>[INST] What precautions should I take when using the lap belt? [/INST] When using the lap belt, ensure it is designed for use by only one person and not intended for children under 10 years. Adjust and use the belt according to the instructions, avoiding excessive slackness and twisting of the straps. Prevent the webbing from chafing against sharp edges and do not alter or add to the belt. If the belt is cut, frayed, damaged, or stressed through impact, it should be replaced. |
<s>[INST] How should I maintain and clean the lap belt? [/INST] To maintain and clean the lap belt, occasionally wipe it with warm soapy water. Do not use bleach or dye under any circumstances. Periodic inspection of the installation will ensure the safe and reliable service of the seat belt. |
<s>[INST] What should I do if the lap belt is damaged or stressed through impact? [/INST] If the lap belt is cut, frayed, damaged, or stressed through impact, it should be replaced. Consult an authorized service outlet if in doubt. |
<s>[INST] How do I adjust the headrestraint for the best protection? [/INST] To adjust the headrestraint for the best protection, align the top of the headrestraint with the top of your head. Use the release button to adjust the headrestraint to the desired position. |
<s>[INST] What is the purpose of the adjustable headrestraint in the vehicle? [/INST] The adjustable headrestraint in the vehicle is designed to help protect you from whiplash and other injuries. Adjusting it properly ensures maximum safety and comfort. |
No dataset card yet
- Downloads last month
- 4