query_id
stringlengths 4
64
| query_authorID
stringlengths 6
40
| query_text
stringlengths 66
72.1k
| candidate_id
stringlengths 5
64
| candidate_authorID
stringlengths 6
40
| candidate_text
stringlengths 9
101k
|
|---|---|---|---|---|---|
e8f523c3-fd16-83d5-c1bb-24af9f9a932c
|
['25ae6700-b1cc-8fd4-ec7f-2fc4a138579f']
|
Greetings,
I'm working on a dataless system that will be booting and rooting
from flash for some environmental chamber (thermal) tests, and
logging the results to an NFS server outside the chamber.
The problem is that the driver for the card under test only supports
one card at a time. That's relatively easy to hack around by passing
in a kernel environment varible from loader that indicates which PCI
slot is OK. Then the probe routine of the driver looks for that
variable and won't accept the device unless it matches.
I'm trying to see if there's a way to get that information into the
loader (or the driver) in some way that doesn't require rewriting a file
in the flash every reboot, to avoid flash write cycles.
I know there's some amount of NVRAM in PCs, but didn't spot anything
about how to get at it from the driver. It'd be nice, for this
sort of application, if there was a way to stash somewhere between
2 and 8 bytes somewhere...
Thanks for insights!
|
0e6915a6-dda7-f172-8a09-6a1ccfd033d9
|
['25ae6700-b1cc-8fd4-ec7f-2fc4a138579f']
|
Greetings,
I am working on bringing up 2.4.19-rmk7-ds3 on an IXP2800-based board
that my company has developed. It's going through the early setup,
and vanishes when the MMU is turned on. I'm new to ARM, but have done
a lot of work in other OSes.
Any good clues on where to start digging? I've got DEBUG_LL enabled,
but it appears that the mapping for the UART on the 2800 isn't in
there (yet) -- I'll be adding that this morning. Any other ideas
on how to crack this nut?
Thanks,
|
18fa704c-1f69-c321-d9f9-fd4fff5b62ce
|
['25affee1-78d9-10c7-767b-5eeb8c50c3c8']
|
Anyone have any thoughts as to just HOW scalable djbdns is? My servers
are currently authoritative on well over a million domains, and I'm
running into scalability issues with BIND (a BIND server with 400,000
zone records takes close to 45 minutes to start named as it loads all of
the zone files into memory). Moreover, I realize that there are plenty
of other reasons to move away from a BIND based architecture. I was
considering generating the "data" file from a database and pushing the
compiled version to several load balanced "front end" servers. but I'm
wondering where the practical limit lies in terms of the number of zones
I can realistically compile into one data.cdb without taking a
performance hit. I can throw hardware at the problem if there's an
issue with the number of _queries_ that can be served, but if I was
going to do a single cluster it would need to be able to handle 2
million+ domains per server. Thoughts?
Regards,
<PERSON>
|
1c8bba11-cd17-c35c-a554-a26409089571
|
['25affee1-78d9-10c7-767b-5eeb8c50c3c8']
|
Greetings,
I apologize if I have missed this in the documentation, but.
I want to configure tinydns / djbdns to answer on a "wildcard"
subdomain. For example, if <EMAIL_ADDRESS> does not explicitly exist
in my data file, I want the server to default to a particular IP
address. How is this done using djbdns?
Regards,
<PERSON>
|
e4c0e3ef-ca2c-3fa3-1704-7ed553ab9354
|
['25b02159-c465-290d-f673-f176625e59ed']
|
Hello,
I just installed tracker to my Fedora 7 desktop and the indexing seems to have almost finished.
Then I found that the cache files are huge.
Here is the result of "ls -lh" in ~/.cache/tracker/
-rw------- 1 aso aso 12K 2007-10-24 17:56 email-contents.db
-rw------- 1 aso aso 1.2M 2007-10-24 17:56 email-index.db
-rw------- 1 aso aso 96K 2007-10-24 17:56 email-meta.db
-rw------- 1 aso aso 167M 2007-10-25 16:03 file-contents.db
-rw------- 1 aso aso 1.4G 2007-10-25 17:26 file-index.db
-rw------- 1 aso aso 13M 2007-10-24 21:31 file-index.tmp.1
-rw------- 1 aso aso 12M 2007-10-24 21:32 file-index.tmp.2
-rw------- 1 aso aso 12M 2007-10-24 21:43 file-index.tmp.3
-rw------- 1 aso aso 14M 2007-10-24 22:01 file-index.tmp.4
-rw------- 1 aso aso 14M 2007-10-25 12:51 file-index.tmp.5
-rw------- 1 aso aso 4.5G 2007-10-25 17:28 file-meta.db
-rw------- 1 aso aso 304K 2007-10-25 17:28 file-meta.db-journal
-rw------- 1 aso aso 1.2M 2007-10-25 17:26 file-update-index.db
The total is 6.1GB.
My home directory contains about 24GB of data (text files, pdf, OpenOffice documents, jpg, mp3, etc.)
Can someone tell me if this is normal ?
I used google desktop and beagle in the past on the same machine.
The google desktop cache was about 858MB.
The beagle cache was about 880MB.
These values are after the initial indexing has been finished.
If this cache size is abnormal for tracker (I hope it is the case), I will delete the cache and let tracker re-index the entire home directory.
The version of tracker I'm using is 0.6.3 (installed from Fedora 7 yum repository).
Thank you,
<PERSON>
|
8b05ca30-024a-9a52-9fe3-83f6b016addc
|
['25b02159-c465-290d-f673-f176625e59ed']
|
Hi <PERSON>,
I think trackerd has now finished reindexing.
The size of ~/.cache/tracker/ directory is now only 251MB.
It is now very small compared to others (GDS, <PERSON>).
The tail of ~/.local/share/tracker/tracker.log is attached below.
I started reindexing at 18:30 and it looks like the reindexing finished at 19:30 (in only 1 hour !).
I was a little bit suspicious this.
So I tried several search words and found the results are satisfying.
I'm very (happily) surprised. Is it usual that tracker finishes indexing in 1 hour for 24GB data and the cache is only 250MB ?
I will continue testing tracker and if there is no further problem for me, I will definitely switch to tracker from GDS.
Thank you for the great work !
<PERSON>
|
16131a23-18fe-c2d4-d271-41a44b1e1c15
|
['25b28665-0966-cf12-b491-aed621d9d033']
|
Does anyone have a good Harvard Output Style. I see a couple on the
University of Queensland that I might be able to modify, but I don't have a
good resource for what the Harvard style really is supposed to look like
(how many authors to display in the bibliography, exact punctuation in the
bibliography, etc).
So I guess this is 2 questions.
1. Does anyone have an accurate Harvard Output Style
2. Where is a definitive resource for what this style is supposed to look
like (on the web preferably, I won't have time to purchase a book).
<PERSON>
|
910817a1-be52-84bf-ae80-49e909ddb6df
|
['25b28665-0966-cf12-b491-aed621d9d033']
|
I have to support <PERSON> on this one. I have been using EndNote for over 10
years and have given many workshops on this and other bibliographic software
programs. I have never run into the "disappearing" problem and am not sure
what "endnote's own version of ~highlighting~" is other than EndNote
information is stored in fields and these fields may be highlighted if you
have your wordprocessor set up to do so.
In regards to many journals forbidding the use of EndNote, I have never seen
specific mention of the Endnote program and would ignore it if I did.
Anytime I submit a manuscript for publication I remove the EndNote fields
and by doing this the journal would have no idea that I ever used EndNote to
prepare my references. In many cases, what the journal means when they
request to not use "endnotes" they are referring to Microsoft Word's endnote
(or footnote) function that has nothing to do with the program EndNote.
As a regular peer reviewer for MEDLINE indexed medical journals, I
frequently receive manuscripts with terrible referencing. Errors are seen
in in-text referencing and the reference lists have a horrendous number of
errors. I have requested rejection of manuscripts simply based on erroneous
referencing (at least when it brings into question whether or not the
authors are appropriately supporting their statements or whether they
appropriately verified their references against the original documents). I
urge authors to use bibliographic software to minimize referencing errors.
It is a simple matter to remove any remnants of the bibliographic software
from the manuscript that is to be submitted to a journal.
I cannot imagine writing a manuscript or dossier without using bibliographic
software.
<PERSON>
|
eae11e00-b506-c6eb-dfdc-16484fa5f2d6
|
['25bf85d5-289c-8f13-b552-abafb35b0f5a']
|
Hello everyone,
I am a newbie to GnuPG, and just wanted to use gpg-agent for ssh into my
server machines. I build GnuPG from source and using 2.1.0 version.
I followed the instructions described in this mailing list thread
<http://lists.gnupg.org/pipermail/gnupg-users/2012-July/thread.html#45059>,
everything worked fine.
I want gpg-agent start automatically after every reboot, so I wrote a small
init script to start gpg-agent. After reboot gpg-agent starts working,
however when I run ssh command, I get *"Agent admitted failure to sign
using the key"* error. (If I start agent manually, I don't get this error).
How is different starting gpg-agent manually from starting it inside a bash
script during system start-up?
FYI, I also tried to use upstart script distributed within gnupg-agent
Ubuntu package, it also did not work.
How can I configure gpg-agent to run at system start-up?
Thanks.
|
5698007d-84b2-9a13-747f-f9df9c17249d
|
['25bf85d5-289c-8f13-b552-abafb35b0f5a']
|
Hi everyone,
I have two simple questions about subkey mechanism. I search gnupg
documentations and mailing list, but could not find answers to my
questions. I would be so glad, if someone can answer below questions.
1) Is it possible to create a subkey of a subkey ?
2) What are the trust implications between a parent key and a child key? Is
it "Ultimate Trust"? How can we confirm this? Or is this something for us
to determine/interpret?
Thanks in advance.
<PERSON>
|
0d05ce3c-f116-be2c-6f5d-2db4adb8951d
|
['25c2f418-2f1d-9b8d-9d50-b40c6eeaaa1f']
|
Hello Korean Team
(please CC me, I'm not subscribed to l10n-korean)
Thanks for your translation work!
The website failed to build korean/international/l10n/po4a folder because it
needs the file tmpl.src (see below).
I have committed a copy of the English one in /korean/international/l10n/po4a
folder, to make possible the build.
If you can/want, please check out that file and translate it (meanwhile the
www.debian.org/international/l10n/po4a/index.ko.html will show mixed Korean and
English, I guess).
Best regards
|
222d759b-ab10-9221-e437-5b6e9dfd0ce7
|
['25c2f418-2f1d-9b8d-9d50-b40c6eeaaa1f']
|
Hi
I've seen the file pseudo-packages.wml was updated:
https://salsa.debian.org/webmaster-team/webwml/commit/63f581e53d1057e732123322e96b00689f91906c
but the file pseudo-packages.translated-description is not present in the Korean
subtree.
I cannot access the links to the files in the bug, I guess they have expired.
I see there was some conversation in January 2018 about this in the mailing list:
https://lists.debian.org/debian-l10n-korean/2018/01/
But I don't understand Korean.
I'm closing this bug for now, please follow up conversation or work in the
remaining file in coordination via the Korean mailing list, and hopefully some
other Korean translator with commit permissions can merge your contributions.
Thanks for the work, and sorry for the delay in handling this.
Kind regards,
|
9463ef57-a8c2-42d2-8cdf-523536dce8fc
|
['25c89d7e-b9d7-c5b2-9b3e-5a5e3b1a6f4f']
|
Hello list,
Can someone tell me why I keep getting these kind of errors in the samba log
files?
I just went over from 2.2.5 to 3.0-alpha 18, I never had these errors in the
2.2.5 version.
Especially the rid [0] is a complete mistery to me since I have no account
defined in my ldap service that has rid 0.
Thank you very much for your help.
<PERSON>.
|
d52baf4e-1e8a-aeef-64ce-69179d02cd89
|
['25c89d7e-b9d7-c5b2-9b3e-5a5e3b1a6f4f']
|
I haven't got this to work altough I have read several mails now on this
list of people that seem to have it working.
I was wondering how this should be done.
I can start UserManager for windows NT and see the accounts and groups, but
whenever I try to open one of them I get a "permission denied".
Please, can somebody help me?
<PERSON>.
|
e9cf804e-6093-6974-7849-504c1d34af70
|
['25cdf207-af21-41c3-5d6c-659ab0509854']
|
Monday Tango Guided Practica @ Spark
Every Monday 8-11pm
Hosted by <PERSON>
For any levels and any styles.
This is a supervised practica, and an open practice space for tanguerosand tangueras
who are continuing seeking to improve and make a difference in your dance.
Bring your issues, discuss, find out and go home with answers. You are welcome to practice alone, too.
You will have individual attentions.
Admission $8
Spark Cafe & Arts Center
161 West 22nd Street 1st Floor NY (Between 6th & 7th Av.)
|
d392a08e-7370-76d8-59d3-6e0d56a1e721
|
['25cdf207-af21-41c3-5d6c-659ab0509854']
|
Tango Guided Practica @ Spark Cafe
Every Monday 8-11pm
Class"Technique for Leaders and Followers"
8:30-9:15 pm by <PERSON>
free w/practica admission
This is a supervised practica, and an open practice space for tanguerosand tangueras who are continuing seeking to improve and make a difference in your dance. Bring your issues, discuss, find out and go home with answers. You are welcome to practice alone, too. You will have individual attentions.
No partner necessary
no experience necessary
For all levels and any styles.
Admission $8
Spark Cafe & Arts Center
161 West 22nd Street 1st Floor NY (Between 6th & 7th Av.)
|
8c69feba-6ee5-f778-484b-2fa75afe50e7
|
['25dc8a11-693d-07b0-2cf3-55d352b3676f']
|
I'm trying to write a simple rig control console utility to set & read the frequency on my IC-718 but I'm running into issues with the termios flags. I'm using Bacon, the "basic-converter" which is not particularly well documented when it comes to serial access but simpler than C for me to program in.
Anyone already done this or could help?
73
Sholto
|
6b435472-c7fc-6a08-6e82-d6818bafeb47
|
['25dc8a11-693d-07b0-2cf3-55d352b3676f']
|
<PERSON>,
After a long search I came to the same conclusion. Specifically the rigctl console utility does what I need (rig control from a Raspberry PI SSH login).
I looked into the "icom" package too but that didn't have support for the IC-718 and according to AI4QR hasn't been maintained since 2009.
I did get actually somewhere with the homebrew program but abandoned it when I realized I could do what I need with "rigctl".
73
Sholto
|
0438f2e7-b99f-4250-43e6-ae57ec53db80
|
['25e2c056-47e7-a2d4-d1c2-2df6513b3ad4']
|
Hi,
I sent a email last week regarding getting passwd working on
my host dsvr. I did not get any responses but think it may have
been down to a problem with my email so if u did respond please
re-send.
I am looking for someone to help get this working, if you can
help please contact me with the details of what you can offer
and at what price.
Thanks
<PERSON>.
|
fee4021f-59d1-88a0-d4d8-7f72a324f19f
|
['25e2c056-47e7-a2d4-d1c2-2df6513b3ad4']
|
Hi,
I have installed the Passwd Horde project on my server but it
does not work for me. My host is www.dsvr.co.uk I am using
Expect to change the password, horde reports the password was
changed but it was not (even if the password meets security
requirements)
I had been working on the attached CGI Expect script which does
change the password but if the password was not changed due to
security requirements it still reported it had been changed. I
would prefer to use the Horde Passwd project so it integrates
with IMP.
I am a Newbie when it comes to promgamming and have no idea how
to script this to get it working.
Can anyone help?
Thanks
<PERSON>.
|
8e403c74-6ea5-eae7-0ccb-9ab53cb4a3e9
|
['25f6e9e6-ae18-e572-84d5-44ea76e670ee']
|
Hello,
In Yokohama there was an action for me to ask for WGLC on this draft. Here goes!
There were 6 people in the Yokohama room who'd read the draft. There's been consistent feedback and support for this draft, and I'd like to ask the WG to send this draft to WGLC. Please reply with your support or dissent in a timely manner.
Kind regards,
<PERSON>
|
c5f77f49-04ec-b232-5394-9d0c87d5169d
|
['25f6e9e6-ae18-e572-84d5-44ea76e670ee']
|
Hello,
A schedule/agenda has been set for IETF 93, and currently, BMWG is set to meet Thursday afternoon, from 1-3pm. To that end, if you have something you'd like to present, an update, new work proposals, etc. please drop <PERSON> and I a note. For those of you updating drafts, note, July 6th is the cut off date for new submissions. Please plan to have your work in by then :)
Thanks
<PERSON> & <PERSON>
|
ebaafaf6-4686-f04a-5db1-78c40f9bc959
|
['260502bb-882e-bc9b-7f3d-6d2bade8ae41']
|
Dear list,
We use AuthUser to restrict read rights for certain pages.
Our wikipages have a read password by default set to 'id:*' an can be set to '@nopass' to make them visibel to the public.
So users that are not logged in, can only see a couple of "public" pages.
Now we're displaying data with a pagelist directive.
But pagelist is displaying only when you are logged in.
BUt we want to display certain information also for the public.
Set $EnablePageListProtect=0 doesn't changed anything.
What is the right approach here? Thanks in advance for any hint.
<PERSON>
|
c02fa086-a8ef-ddc9-4903-81341ed74c86
|
['260502bb-882e-bc9b-7f3d-6d2bade8ae41']
|
Dear <PERSON>,
we use AuthUser to produce "public" and "private" pages. For everybody who is not logged in , it's only possible to see the public pages.
Now I found out that there is a field in the data test of wiki.d sites which is called public and has the value yes / no.
Is it possible to make a PV out of it?
I found an explanation in on the pmwiki.org page how to make Custom Page Variables.
But couldn't figure out how to link the "public" field in the Group.Side-Text to the Variabel.
Any idea?
Thanks for any hint in advance.
<PERSON>
|
eedd6dac-f072-32ec-408c-af5824e6eb8c
|
['261aebd4-7aa1-8da3-14ee-8a3e679dadeb']
|
Hi, I'm trying to get an appropriate set of residuals to check a
Poisson mixed GAMM's fit, but I've found a few different methods to
use on the gamm4() object that yield inconsistent results. Below is a
working example of 4 ways to generate residuals using one of the gam
or mer elements in a gamm4() object, and a demonstration that only two
of those approaches are the same. In <PERSON> (2006), there's a mention
that residuals should be calculated using fitted values off the gam
element that also incorporate the random effects, but it's not clear
to me what's the best way to arrive at this.
Any comments?
Thanks very much.
<PERSON>
|
463dced8-19ea-2ec9-155b-36febd47c007
|
['261aebd4-7aa1-8da3-14ee-8a3e679dadeb']
|
Hi again.
I've been working with a Bernoulli dependent variable and modeling its
values as a mixed model using glmer(). My understanding is that it's
not possible to model overdispersion in a <PERSON> dataset (for
instance, see <PERSON> and <PERSON> 2007, p302, or
http://finzi.psych.upenn.edu/R/Rhelp02a/archive/91242.html ), however
I can find some suggestions that while it's technically not possible
to do this, estimating some analog of this parameter may nonetheless
improve model fit (see <PERSON> and <PERSON> 2007, and a paragraph
in <PERSON> and <PERSON> 2002, p297-8 (table 10.4, the "bacteria"
data)), even if that parameter doesn't actually represent
"overdispersion" per se. I don't really understand how this is
possible for <PERSON> datasets -- I think the mechanics of this
process are well beyond me -- so I'd have to take it on faith that
it's working properly, and that makes me uncomfortable.
What I find interesting is that in the following self-contained
example, glmer() happily models with a quasibinomial family and gives
tighter SEs about the fixed effects compared to binomial(), but
glmmPQL (and incidentally, a glm() without the arbitrary grouping
factor) doesn't (or maybe it does? -- it has broader SEs, but also a
residual SD term). In general, my suspicion is that something's amiss
-- I'm somehow "abusing" the glmer -- and I'm better just sticking
with the binomial family for <PERSON> datasets. Any thoughts?
Thanks very much.
<PERSON>
|
38b2c3cd-5137-a1ea-6e6d-1b9c9518278b
|
['261b5ebb-46ec-e578-03da-5b04482ba9af']
|
Hello vlc_developers,
my name is <PERSON> from Munich and I'm student of computer science preparing my dissertation at the FernUni Hagen.
The topic is a generalized self-learning valuation and classification system. As content I use audio files (mp3). For the client prototypes I used C# with WMPLib.
But this was not a final decision about technology. The performance of the WMPLib is the main deficit especially under Vista - contrary to VLC.
Introducing my ideas to an interested prof yesterday the time for a final decision about technology has come.
I would like to use the following:
Qt for Windows: C++ (Qt 4.4.3)
Eclipse IDE for C/C++ on Windows (3.4.0)
Qt Eclipse Integration for C++ (1.4.3)
and as "playing component" VLC Media Player (LibVLC)
I've worked with none of these yet so I'm asking for comments.
Regards
|
2e425215-0d21-fb45-814a-473e7e56f8cd
|
['261b5ebb-46ec-e578-03da-5b04482ba9af']
|
Hello <PERSON>,
thank you for your answer.
1. The output of the commands are attached.
2. The problem seems to be equal no matter if mouse or touchpad is used. The
file BugDescription.txt describes the problem in more detail.
3, I've changed touchpad settings speed and sensivitiy without having any
change observed concerning the problem
4. I've not tried any other desktop environment yet.
Greetings from Munich
<PERSON>
|
e715ef5f-7bcd-9137-7216-9a7524d3eded
|
['261b86a9-c7c3-efc8-ae89-84d9cbbaa747']
|
Hello,
I've also written an implementation for C++14's std::dynarray.
It theoretically supports both memory allocation using `operator new'
and `alloca'. (Switch by #defining USE_ALLOCA at the moment.) However the
alloca implementation is buggy because std::__uninitialized* seems to have
issues initialising the memory.
In theory dynarray should be the C++ equivalent of VLAs. Which would require
stack allocation. But I'm not sure if this can be safely handled at all and
the implementation should instead simply stick to operator new/delete. Maybe
this could be a configuration option (not sure how such a thing would be
handled).
Another problem is the allocator constructor interface. Which seems to be
covered by this LWG issue:
http://www.open-std.org/jtc1/sc22/wg21/docs/lwg-active.html#2255
As I have said in my other submission: I have not yet signed the fsf
copyright papers for GCC. But I have requested them.
Looking forward to comments.
Regards,
<PERSON><IP_ADDRESS>dynarray.
It theoretically supports both memory allocation using `operator new'
and `alloca'. (Switch by #defining USE_ALLOCA at the moment.) However the
alloca implementation is buggy because std<IP_ADDRESS>__uninitialized* seems to have
issues initialising the memory.
In theory dynarray should be the C++ equivalent of VLAs. Which would require
stack allocation. But I'm not sure if this can be safely handled at all and
the implementation should instead simply stick to operator new/delete. Maybe
this could be a configuration option (not sure how such a thing would be
handled).
Another problem is the allocator constructor interface. Which seems to be
covered by this LWG issue:
http://www.open-std.org/jtc1/sc22/wg21/docs/lwg-active.html#2255
As I have said in my other submission: I have not yet signed the fsf
copyright papers for GCC. But I have requested them.
Looking forward to comments.
Regards,
Rüdiger Sonderfeld
|
fc91c66f-1081-071f-8309-097d4b7b68f7
|
['261b86a9-c7c3-efc8-ae89-84d9cbbaa747']
|
Hello,
I'm currently in the process of adding a service file to GNU Emacs:
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16507#26
The major point of discussion is how and where to install that file. Systemd
has guidelines for system service files in daemon(7). One could follow them
for user service files by simply replacing `systemdsystemunitdir' with
`systemduserunitdir'. Which is basically what the patch does so far. However
this would cause problems when (a) installing several versions of GNU Emacs in
parallel and (b) user installations.
(a) could be solved by applying `program_transform_name' (from autoconf's
AC_ARG_PROGRAM) to the service file name. E.g., turning emacs.service into
emacs24.service.
I'm not sure how to solve (b). For a system service it might not make sense
to install it somewhere outside of /usr (or /usr/local) and simply following
`systemdsystemunitdir' makes sense. But for a user application like GNU Emacs
it should be possible to install it to any $prefix (e.g., ~/usr) without
requiring root access. Right now, I'm thinking of either setting the default
to not install the service file or installing it to `datadir'.
What is the best practice for user unit files? How are other projects
handling this?
Regards,
<PERSON>
|
1141f7ba-14a0-09b7-f3d4-947e64265514
|
['261f922a-88e6-24d8-c4c4-285c8ddc1801']
|
A key point occurs to me, and I'm embaress to have niether thought of nor
expressed before: A lot of this rests on the assumption that the
protesters are *morons* and can't see the consequences of thier actions
(ok, ok, "young" :))
If I were a <PERSON> student, one slimy but tempting tactic would be
to take the papers. Aside from the effect of smearing opponents, it has
*enormous* publicity value.
Now, let's assume, for a moment, that the protesters know this. They know,
as a consquence of their actions, that <PERSON>'s ideas will get *greater*
circulation. In this scenario, it's hard to see their action as or *even
intended* to suppress his ideas. They might express the *wish* that
<PERSON> would shut up, or even that he be suppressed. The latter wish is
worrisome, truely, but it's worrisome *content*. (Thus, I think I would be
amenable to an argument that the protesters don't sufficiently "respect
freedom of speech" because of what they *say* by their actions, not
because their *actions* themselves directly suppress ideas.)
From the charge of theivery to the charge of thuggary to the charge of
Talibanism...a slipperly slope of "T"s :)
Oh, and *clearly* the folks who had nothing to do with the ad
(directly) but who wrote aritcles, or were covered in the paper, or placed
ads, or *wanted* ads all have suffered harm of various sorts. But
presumably those were secondary effects. A large boycott or march can
inconvenience me in all sorts of ways without wronging me or violating my
rights (even if illegal). Or may be justifiable.
I'll also note (again) that there are many, many ways to frustrate the
*protesters* without either endorsing <PERSON> or criminalizing them. The
website, passing out papers...the university could *pay* for an augmented
print run and for people to pass them out *with* flyers about exchange of
ideas or critically responding to <PERSON>. The papers could have refused
the ad and run the op-ed *as* an op-ed, with surrounding commentary, etc.
More speech? Better speech?
Cheers,
<PERSON>.
|
e669fefd-ff8a-405e-8f5d-b3cfd3f9fc3a
|
['261f922a-88e6-24d8-c4c4-285c8ddc1801']
|
As most of the Monkeyfist insiders know, my darlin' dearie and occasional
Monkeyfist contributer <PERSON> is also a kickass singer songwriter. We
finally managed to get some very simple recordings of her songs put
together on a mp3.com CD, which is now available for sale at
http://www.mp3.com/ZoeMulford.
(<PERSON> asked me to post this to the list, so it's not *entirely*
shameless ZoePromotion. Not that I feel any shame about promoting her ;))
Some of the songs are available for free download on the site, so you can
try before buying.
The cover illustration first appeared on Monkeyfist! There's a second,
rather killer, cat on a quilt illustration on then inside. I'm hoping to
get them on tshirts at some point.
We're quite pleased at how it all came out. The mp3 folks do pretty decent
work.
Cheers,
Bijan.
|
9f6851fe-a047-b674-9842-cc22b70100c1
|
['26219b35-bb32-b864-bfe6-67f90d8218b6']
|
Hello,
I'm using Scott Ellis pwm driver (master branch),one of the driver
parameters is frequency. When I write the freq. I need (I need 4 pwm with
frequencies 6 ,12 ,24 ,48 Hz ) the output is always the default freq.
(1024) . Can anyone tell me what is the right way to set the freq. .Thanks
in advance.
<PERSON>
|
02bcf636-8911-7e10-4aae-29854425bcc7
|
['26219b35-bb32-b864-bfe6-67f90d8218b6']
|
Hi again
My advice, to get your built fast without problems use host machine with Ubuntu 10.04. I used different version of Ubuntu and got different failure messages. I only got it after installing Ubuntu 10.04 in virtual box (I set the virtual machine with virtual size 120G ,the extra size is really useful (don't forget it's virtual size so it won't effect you until its fully used ) and can make your work easier, beside you can place the virtual box on an external hard disc if your host doesn't have that much space )
good luck
<PERSON>
|
eb6fd7f3-0fad-aca7-5648-96796d050a66
|
['26288f4c-271f-6687-f614-c445ca6329fe']
|
Please find enclosed below an advertisement for lectureships at the
Department of Computer Science, Durham, UK. The Computer-Assisted
Reasoning Group in the department is working on type theory, logic, and
their applications. You can find the web page of the group from URL:
http://www.dur.ac.uk/CARG/
We would like to encourage applications from candidates in the related
research areas.
Best regards,
<PERSON>.
|
8a500689-df24-b503-3de7-75a9710c9564
|
['26288f4c-271f-6687-f614-c445ca6329fe']
|
EPSRC PhD Studentship
Department of Computer Science
` University of Durham, U.K.
Applications are invited from students with good undergraduate or MSc
degrees in computer science or mathematics to study for a PhD degree. A
U.K. EPSRC research studentship is available for a suitably qualified
candidate for the October 1999 entry (or later). It covers tuition fees
and maintenance for three years.
The successful candidate is expected to work in the Computer-Assisted
Reasoning Group (URL: http://www.dur.ac.uk/CARG), and in particular with
Dr. <PERSON> and Dr. <PERSON> on the EPSRC-funded project `An open proof
checker based on type theory' (http://www.dur.ac.uk/~dcs0zl/open.html).
The student's work will involve both the theory and pragmatics of
type-theoretic proof checking.
Further enquiries and applications can be sent to
Dr. <PERSON>,
|
0d45c5c5-36c8-b23a-9137-e21efb68ea99
|
['262bed47-0fbb-98af-7447-dc18db41af61']
|
Hi.
This is <PERSON> and I am a first time user of the Demeter accessories.
I downloaded and installed the files from the github site using the 0.9.21
(64 bit) installation file. It was done on the Bootcamp Windows 7 on my
Macbook Pro (2012). It seemed to have installed fine, but the moment I
click on the icons to open any of Athena, Artemis or Hephaestus, all of
them show a command window, thats empty, and in a few seconds crash and
close. No error windows or command line error prompts.
Any idea on what might be wrong ?
Thanks,
<PERSON>
|
d07c90b9-bb8d-9255-6b03-7ad203d3f7ef
|
['262bed47-0fbb-98af-7447-dc18db41af61']
|
Dear all,
I was trying to simulate XANES using FEFF8.4 at Cobalt K edge. This is for
a cluster and not a crystal. I encountered two problems.
1. *Using the FOLP card*: The actual cluster size is about 180 atoms
extending upto 18 A in radial distance from the central cobalt atom. But
there are quite a few instances of Hydrogen atoms that are too close. I
tried the FOLP with the recommendation for Hydrogen of 0.8, I seem to get a
syntax type error, that i cant figure out. I checked the crystal structure
and the smallest hydrogen bond distance is 0.89 A. (I have attached the
corresponding input and log file with suffix 'full cluster')
2. *SCF for small cluster*: Since the problem with the hydrogen distances
persisted, I decided to run the calculation for a smaller cluster (about 50
atoms). I used the conditions as prescribed for small clusters - SCF 5.0 1,
FMS 5.0 1, RPATH -1. Those hydrogens that were too close (within this
smaller cluster, there were about 3 of them, and none in the first or
second shell of co-ordination) were removed manually. Now, I did not have
the error on distances, did not require the FOLP card to be manually
altered, but the log1 file seems to suggest that the SCF is not calculated.
I cant figure why that is the case. (I have attached the corresponding
input and log file with suffix 'small cluster')
Sorry for the long email, and thank you for any suggestions.
Ganesh
|
46816ba9-0314-7584-07d3-628f5b59d9be
|
['26304dd7-0d23-c85b-0bc5-5aa57732ba18']
|
Yep using Kontakt 2 - but having some weird fun and games with memory - suspect probably not set up right - I've got 3 gb RAM but still chewing a fair chunk of it up (even with DFD set) - wading thru the "Optimising your PC for Music and XP" type resources that I've scoured from the web...
Does have some nice stuff...
Cheers
|
bccb5f9e-ef67-d435-a846-b34dc0dd556e
|
['26304dd7-0d23-c85b-0bc5-5aa57732ba18']
|
which brings me to a point, and apols for perhaps moving into the realms of "off Topic"
any suggestions as to whether better to use e.g. Teleport and join some pcs (have an "old", less powerful p3) or look for another motherboard which will take more than 4GB.....is there a better list to look at re this conundrum...??? Anyone had any experience with Teleport???
Thanx
|
22ca5f22-0675-7e34-11ca-ad94951f3415
|
['265305cb-585a-6f64-a1d8-d2ebcecb8761']
|
i have two modules:
module1
module2
they are both "independend" - means every module can be loaded into the Netbeans platform or not
i now want tho call the action2 (located in the module2) from the action1 (located in the module1) IF the module2 is loaded.
means: i call the action1 inside module1 from a menu-item. this actions does some magic. then it detects if module2 is also loaded. if yes, then the action2 of module2 is also called.
i hope anybody can help me...
<PERSON>
|
aa878c3a-1249-5740-e4ae-a210a5163275
|
['265305cb-585a-6f64-a1d8-d2ebcecb8761']
|
i am using a QxIframe to include some data in my app. now i have the
problem to "refresh" the iframe. Now my problem is:
myiframe.setSrc(myiframe.getSrc()) will not work, because both vales are
the same and so the modifier - function is never called.
so my question, is it possible to add a "refresh" - function to the
QxIFrame?
<PERSON>
|
08c2c506-f90e-8f8b-1dfd-22a3799d5012
|
['26657987-986b-417c-7572-00bf517aacc9']
|
When trying to insert my personal modmap, I stumbled on the following
problem (xfree 4.3 from ds4): X suddenly took 100% of CPU (even tough
top indicated only 50%), and after a while the computer became totally
non-reactive (for a while, the server kept on moving the mouse).
I am competent enough to turn my xmodmap into a xkb file (which I did,
and I have now even more ideas of stupid keyboard customization), but
people will have trouble with that.
Is it a known bug ? Btw, where should bugs for ds4 or (soon)
experimental be filed (I think there is no experimental tag in the BTS)?
Sincerly,
|
d9326949-e990-a098-ca4e-b73959085247
|
['26657987-986b-417c-7572-00bf517aacc9']
|
Hi,
I am currently looking at ttf2tfm and would like to submit the
following patches:
- one to make bounding boxes of chars correct.
- one to make ligatures work with boundary char as successor
- one to patch a very simple typo (I just saw it browsing the code, I
didn't even triggered it).
I attach hereby the patches. They work for me(tm). I can discuss any
technical aspects of them as requested.
Sincerly,
|
966a2958-4285-f6f5-bc1a-fbdcca6344ae
|
['2677cab4-a24f-5b3a-106b-3de1e35b5508']
|
[I would have thought this was a FAQ but I can't find it.]
I want to run a TightVNC server on Windows 2003 and have the users
forced to logon as new users when they connect. That is I don't want
them sharing a connection and I don't want any other users forced off.
We can do this with the Windows "Remote Desktop" tool and I assumed
you'd be able to do it with TightVNC but I cannot work out how to. Can
anyone help ?
thanks
<PERSON>
|
11ae62b7-ebc3-c82c-30e1-0603bbe155fa
|
['2677cab4-a24f-5b3a-106b-3de1e35b5508']
|
[I would have thought this was a FAQ but I can't find it.]
I want to run a TightVNC server on Windows 2003 and have the users
forced to logon as new users when they connect. That is I don't want
them sharing a connection and I don't want any other users forced off.
We can do this with the Windows "Remote Desktop" tool and I assumed
you'd be able to do it with TightVNC but I cannot work out how to. Can
anyone help ?
thanks
<PERSON>
|
725feace-9070-9444-df59-e7328f930701
|
['267fd4f8-f19a-63b1-77da-23ad03e8698e']
|
Hi,
I'm currently testing my setup of the tomcat installation, I would like
to amend my relying-party xml file to use the test sp app that I have
made, what changes do I need to make. I am looking at page
https://wiki.shibboleth.net/confluence/display/SHIB2/IdPQuickInstallComp
leteInstall but cannot see the information.
I require the information to manually change as I am still unable to run
the msi.
Regards.
|
d29ebf41-b5eb-fe95-35fa-2ade0a26b374
|
['267fd4f8-f19a-63b1-77da-23ad03e8698e']
|
Hi,
Is anybody able to tell me what I have done wrong. I'm using this page:
https://wiki.shibboleth.net/confluence/display/SHIB2/IdPInstall. I have
copied the war file to my tomcat_home/webapps directory, the idp.xml
config is setup as written on
https://wiki.shibboleth.net/confluence/display/SHIB2/IdPApacheTomcatPrep
are. I have also attached the xml in this file.
The path used for docbase does house the war file.
Thanks in advance.
|
7bc68b69-faf2-99bc-d89f-c1679956a17b
|
['268c1082-b111-9209-ca0d-7e846d42834f']
|
Hello!
I've just orderd a Slimp3 from your danish reseller (i live in
sweden) i wonder if i should directley upgrade to the latest
firmware (1.3a4.) or is the slimp3 already "up-to-date"?
I have already installed the latest version of the Windows server on
my computer (3.0b5).
Thanks for a great pice of software, i can't wait to get my hands on
the hardware!
<PERSON>, Sweden
|
ca7d4146-2a26-9180-94d0-be60b472b1f0
|
['268c1082-b111-9209-ca0d-7e846d42834f']
|
I Have an idea for the server software.. it would be fun to have
some sort of toplist for exemple the 10 most played songs, so I can
go into the menysystem of slimp3 and find a menu named "Toplist" and
there find a generated playlist with the 10 most played songs.
How to generate this playlist then?
Whenever a song is played throgh the Slimp3 that song gets
a "toplist point" in a database, and whenever the "Toplist" meny is
choosen a playlist is buildt of that points in the database.
I know this type of plugin already exist for winamp, and it should
be createble for Slimp3 server, or?
http://www.ziqane.net/img/screenshot.gif
http://www.ziqane.net/products.asp?id=1
Something like that..
/Hans
|
b08f63e3-3535-f457-1ae4-134380ba770b
|
['268c5a99-f820-6a47-bccd-22e7ab053a0d']
|
Hi,
I have successfully installed SVN via SSH on my linux server. I would like
to set it up so I can access
svn://svn.mydomain.com/<http://svn.icanhasbocaburger.com/>in
TortoiseSVN. I created a new repository by calling svnadmin
create svn. Now, I would like to add existing code on my server into the
repository, then set it up so I can access the repo from TortoiseSVN.
Could you please help me out? I'm stuck and haven't been able to find any
docs to show me what to do.
Thanks,
<PERSON>
|
a2b8b25e-c26a-b86a-a7bf-a390418f09cf
|
['268c5a99-f820-6a47-bccd-22e7ab053a0d']
|
Good morning,
Rhythmbox is by far my favorite music player application for Ubuntu, but I
have one issue with it. I can browse my iPod and even copy songs off of it,
but there are two things that I find rather pesky:
- Copied songs have meaningless titles (such as ALEB.mp3) as opposed to
the song title.
- There is no way to do a complete iPod backup
I'm a junior computer engineering student, and I was able to write a little
Qt4 GUI program that accomplishes these two tasks in a matter of hours. I
doubt the code is immediately integrable into your project, but the point is
that I don't think it would be incredible cumbersome to implement these
features, especially if you're working with gtkpod already.
Feel free to let me know what you think. I'd be happy to develop if you need
me to.
Thanks,
<PERSON>
|
b305d1fc-fa23-0bd0-67ce-74608c115ba8
|
['269317bc-ebf9-6904-671c-0b3aa36232fd']
|
Developers are wanted for the new sourceforge project Mockmma which will
develop a capability to translate Mathematica files into Maxima .mac files
and provide a Mathematica-style command line. This would build on <PERSON> Mockmma, <PERSON> Mathematica to Maxima compatibility
tools, and some work by <PERSON>. Some initial objectives would be to
get Mockmma to compile on LISPs other than <PERSON>, create an
executable and release it, get this executable to work with wxMaxima, and
import the Combinatorica.m package (the author has given permission) into a
Maxima .mac file (or choose your favorite Mathematica package).
Initially this would translate Mathematica functions into Maxima functions
even though this are evaluated quite differently.
Please contact me to be added as a developer.
<PERSON>
|
e0cfaa08-7e01-fad5-ac36-25c2c4c91753
|
['269317bc-ebf9-6904-671c-0b3aa36232fd']
|
Below is a list of 200+ Mathematica (tm) commands which Mockmma correctly emulates. Any help in refining this is welcome.
To install Mockmma and run under wxMaxima: Checkout trunk/Mockmma from the Mockmma sourceforge project into the directory share\mockmma under the Maxima source tree; type load("mockmma/mockmma.lisp"); and type :lisp (mockmma). You should see the prompt "In[1] :=".
<PERSON>
|
d71570a2-c0cb-7483-375b-6ab903d5fd5b
|
['26a3f867-d6ea-1c5f-f179-667493f73d7c']
|
http://github.com/claymccoy/ExecutableWar
Here is an example project for people interested in making an executable war, or a Groovy script to start embeded Tomcat.
The idea was to take my real project and remove everything not relevant to this example. But it doesn't work anymore. :(
The script just quits after calling embedded.start(). In EmbeddedTomcat.groovy on line 69.
http://github.com/claymccoy/ExecutableWar/blob/master/RUN/src/main/groovy/com/claymccoy/tomcat/EmbeddedTomcat.groovy
There are no errors, why would the embedded Tomcat server just stop? That's useless.
In my original project it keeps the tcp accept loop going until I terminate the process. I'm not sure what the difference is.
I can deploy this war and everything works fine.
If anyone has suggestions of any kind please don't hesitate. I had such trouble finding documentation to make this happen, that I wanted to put a good example out there to help others. I'll eventually write a blog post once I get this working correctly.
Thanks,
<PERSON>
|
779d5831-b94a-ab70-1edc-9c2a2c446c2c
|
['26a3f867-d6ea-1c5f-f179-667493f73d7c']
|
OS X 10.6.2, Java 1.6.0_17, tomcat 6.0.18
I've spent hours researching how to configure embedded Tomcat. It starts up fine, Spring config works, but I get 404's when loading the jsps ( http://localhost:8080/App/test.jsp) . I have the code that I am using to start Tomcat here:
http://gist.github.com/259737
There is a directory generated from where I run the above script. (work/localEngine/localhost/App) but nothing gets copied there. Are my JSPs supposed to end up there?
There are no errors on the console and no log files.
If I use a context that really doesn't exist I get a blank screen rather than a 404. ( http://localhost:8080/App1234/test.jsp)
I suspect that my configuration is wrong because I am making a lot of guesses. All I can find is the api docs and some broken examples. Can anyone explain or point me to better documentation?
I have some specific questions:
I'm pretty sure what I am passing to creatHost is wrong.
Embedded.createHost(...) requires an appBase - "Absolute pathname to the application base directory for this virtual host." What is my appBase?
My project is a typical Maven project with a Web module.
Do I need Catalina_Home setup programatically or otherwise? I have no Tomcat actually installed. I only reference Tomcat in my Maven pom.
Do I need a sever.xml somewhere. Currently I just have a web.xml.
The best information that I have found is these examples:
http://stackoverflow.com/questions/640022/howto-embed-tomcat-6 (I'm using the same Maven pom dependencies)
http://raibledesigns.com/rd/entry/jetty_6_x_versus_tomcat
And the apis:
http://tomcat.apache.org/tomcat-6.0-doc/api/org/apache/catalina/startup/Embedded.html#createConnector(java.lang.String, int, boolean)
I've seen this question asked many times without answers.
http://mail-archives.apache.org/mod_mbox/tomcat-users/200606.mbox/<R2/AhHTX8eFVI3PX@example.com>
Here a guy in the comments shows his emedded startup code, http://raibledesigns.com/rd/entry/jetty_6_x_versus_tomcat He says"The bit about the default web.xml is to get the standard behaviors you'd expect from Tomcat, like processing JSPs. " Why did he need to resort to this to get his jsps to work?
Thanks in advance for any help!
Clay
|
3a3a1b62-1a4b-58ff-578b-155b787f8f90
|
['26a75c19-71fc-baf1-094f-a63233dc7976']
|
Hi everyone.
I have a serious problem in our data center and no clue why.
we have an R510 (internal Broadcom GigE Dual-NIC) and one Single-Port
Intel GigE PCIe Card.
After a reboot the order of the NIC in our Debian Squeeze seems to
change, that eth0 is not the Intel Card anymore but instead one of the
internal Broadcoms. After another Reboot this changes back so our
network config in /etc/network/interface (all static) works again.
Is that a configuration problem in the BIOS/Internal NIC MBA? or in
Debian itself and how can i prevent this?
It seems that this problem only exists on the Debian Machine since we
have two R310 with 2 internal and a Intel Quad-Port Card but with SLES11
(Astaro Security Gateway v8.3) on it and after a lot of reboots theres
no NIC change.
Thanks for any help!
<PERSON>
|
c7a2d857-7ea0-eaaa-01e1-9c736e5d018c
|
['26a75c19-71fc-baf1-094f-a63233dc7976']
|
Hi alltogether,
<PERSON> new to this Mailing List and we wanna deploy latest Debian Squeeze
to our newly arrived R310 and R510 Servers.
Can anyone tell me if theres information regarding Debian itself (not
ubuntu)
and where i can find it.
All of our Servers will have 1 or 2 Xeon CPUs, between 4 and 24GB RAM
and all have a H700A PERC with some Drives
in different RAID-Flavors.
2 of those R310 are being used as Asraro Gateways (SLES11) and theyre
already working.
Thanks for all help!
<PERSON>
|
7010fd96-408e-0619-c0bc-af1be794417e
|
['26c860c1-fb89-9fe8-3ec7-fc01ad3db5ca']
|
Requests from knoppix.net/forum
1)
Have someone who's computer freezes even with the "failsafe" option when
probing sound. So i'd say a "nosound" option is in order, or, make
"failsafe" not probe sound.
2) Please create auto swap deleter! When knoppix terminating it should delete
the swap please!
3) software to add :
ethtool - 37.8kB - Display or change ethernet card settings
several more recent ethernet drivers implement the ethtool interface ( without
this program you can't change settings! )
distcc - this was requested a while ago, but no cigar.. it makes knoppix very
useful for compiling kde - just pop it in a bunch 'o machines and distcc gcc
away :)
Best Regards
<PERSON>
|
1325c548-68b0-5cd2-a608-adf9a4a01753
|
['26c860c1-fb89-9fe8-3ec7-fc01ad3db5ca']
|
Hi there,
What version of GCC has been used to compile the Knoppix kernel?
On DVD-Beta-1 gcc is a symlink to gcc-3.3 which it seems can't compile
linux-2.4.20 with the knoppix .config, so I am guessing you have used a
different complier version.
Maybe it might be an idea to symlink gcc to a more stable compiler on the DVD?
Best Regards
<PERSON>
|
70baaf05-ccbe-149b-a64e-e1d6bc542c99
|
['26d04f22-3538-772b-d175-66f5abba7023']
|
I can use iText to digitally sign a document - ONCE.
IF I try to use iText to digitally sign a document for the 2nd time, it
breaks the first signature:
Unexpected byte range values defining scope of signed data.
Details: byte range of signature is invalid.
An obvious reason is the fact that iText inserts the signature at the
beginning of the file, hence the existing signature is shifted down - and
it's ranges become invalid. And because ranges are part of the signature
digest, they can not be changed (fixed).
Is there some way to tell iText to physically place the signature at the END
of the file, pretty much like the Adobe Technical Note
"Digital Signatures in the PDF Language" suggests?
<PERSON>
|
3d9c1caa-a75d-d14b-ac6f-dfa86862b380
|
['26d04f22-3538-772b-d175-66f5abba7023']
|
A naïve question: Where to go for certificates for digital signing of PDF
Documents?
In theory, one can sign PDF with a variety of certificates, from self-signed
and simple mail ID from VeriSign to level 2 and 3 certificates
(well, SSL
certificates do not work).
However, there is a problem: Adobe Reader (and probably Acrobat) come out
of the box with only one _trusted_, root certificate that of Adobe Inc.
And thus, certificates issued by any other CA (veriSign,
) all scare the
reader:
Authenticity of this certificate can not be verified.
A simple fix is enabling the Reader Windows Integration and voila all
the standard, Windows trusted CAs become available and my signatures now
verify nicely. UNFORTUNATELY, enabling Windows Integration is somewhat
hidden in Reader interfaces, and I can list all those steps in my signature,
and a normal web user gets scared when looking at my documents
Hence, it comes to where can I get certificates rooted in Adobe CA?
And it seems that the only source for such certificates is the VeriSign
(formerly GeoTrust) Adobe Certified Document Services program which
(besides the pricing) has a drawback of utilizing USB iKey 2032 (which I am
having a real difficulty interfacing).
Does anyone know about some other source of Adobe CA rooted certificates?
<PERSON>
|
67e81745-6601-6db8-ef2a-15d5fecccbc8
|
['26db9240-587c-9862-9719-7673e99f93c4']
|
When I hit Change Password, stays on the same URL.
I don’t know. I’m trying, thought, to change the pass using SHH.
SHH?
SSH/Putty.
Dave> Oh - that won't really help much, as the <PERSON>> password is stored in a hashed form in Dave> the configuration database.
Can I run an query update?
Thanks you,
<PERSON>
|
66d68617-123e-fbbd-306a-089d01c2d12d
|
['26db9240-587c-9862-9719-7673e99f93c4']
|
Hi,
On pgdmin Gui, I'm trying to change the password for the Gui, but the page
returns an error:
I I put the wrong current pass, he says the password is wrong. If I put the
right one, it gives me a 404 on send.
I guess Its because it is setup on my own subdomain, I don't know. I'm
trying, thought, to change the pass using SHH.
I have no idea how. Any ideas?
Thank you
|
1ffc8a40-fc1f-290e-9832-b27167c15923
|
['26df0279-bbbc-56e7-f0ce-ad4d810c21fe']
|
Since I'm not a programmer, I can't do anything myself, but maybe
someone else will find it useful.
"What I wish for" ;)
- some kind of sorting (by author at least) when HTML-exporting
- a "serial-add" feature: input ISBN, press enter, auto-present the
add-dialog again (on lookup-failure, display a big exclamation-mark
or beep or whatever) - esp. useful with barcode-scanners, as it's
quite impractical to constantly switch between scanner/keyboard/mouse
cheers,
&rw
|
32841735-181e-6d45-dd53-f32995cfa4f1
|
['26df0279-bbbc-56e7-f0ce-ad4d810c21fe']
|
Hi,
I have a collection of somewhat over 2,000 books, however due to a
mistake on my part I seem to have input about a quarter of those twice
into Tellico.
Is there a way to eliminate duplicates, preferrably based on title
(quite some of my books predate ISBN)? Or do I have to bite the
bullet, so to speak, and go through the whole list manually?
Grateful for any hints.
(Tellico 2.3.5 on Debian, in case it matters.)
cheers,
&rw
|
f5ab8f6f-0af7-0d8d-08d2-246103beb8ed
|
['26eed8ac-67b1-ad61-1d75-6fdf553d27e1']
|
Hi all,
I've been wanting a more robust way to do client-side routing in my
knockout applications, so I decided to port Backbone's Router to use with
knockout. I also borrowed a few conventions from Durandal's Routing
strategy. This also has some integration with <PERSON>
knockout-amd-helpers module/template loader.
I welcome your feedback on this idea and any other improvements you would
suggest.
Thanks! <PERSON>
|
7bcdb0c9-417f-b74d-f43b-10f3799c45ce
|
['26eed8ac-67b1-ad61-1d75-6fdf553d27e1']
|
Hi all!
I spent a couple hours yesterday struggling with why this is
happening, perhaps you can enlighten me.
I posted an example here: http://jsfiddle.net/a7yzJ/
Basically, I want to load up various sections of form inputs, some
being radios, some being checkboxes. This needs to be configurable.
I want to store the selected values in the same model property, say
"selectedValues = ko.observableArray()".
But I found that elsewhere in the code when I'm trying to grab the
selectedValues from all the sets of inputs, I have to first check
every time whether the selectedValues is still an Array or not.
I know that radio name collections will only store a single value,
while checkboxes will store the array of selected values.
What I don't understand is why my declared observableArray() is being
secretly modified to a single value observable()?
I wish the radio checked binding would just store a single value in
the [0] index of the array so I can still treat it the same.
Your thoughts are welcomed.
Thanks,
<PERSON>
|
5826d0c7-86fd-e573-3a55-d5eadeea6b16
|
['26fbcef2-4dd7-5472-bf63-ef10310aa8eb']
|
I just checked-out and built the latest GBrowse (2.03) from SVN. It
complains in the error logs that it's missing Bio<IP_ADDRESS>Graphics<IP_ADDRESS>FeatureFile.
I can get around this by installing the missing module from CPAN,
but then it complains that there are a number of unitialized values in
Bio<IP_ADDRESS>Graphics<IP_ADDRESS>Browser2.pm ($proposed_source, line 291) and
Bio<IP_ADDRESS>Graphics<IP_ADDRESS>Browser2<IP_ADDRESS>Session.pm (unititalized value in string eq,
|
a8031ff6-82f8-85ba-d1da-ca118b11bd2c
|
['26fbcef2-4dd7-5472-bf63-ef10310aa8eb']
|
I've attempted to install 2.0 again, this time on an iMac running Snow
Leopard. I've tried doing this exclusively through cpan, and have
encountered a number of different errors:
*Some of the module prerequisites return failure on make, but seem to
install fine when run manually in the .cpan/build directory. Off the top of
my head, these were GD, GD::SVG, Safe::World, and Net::OpenID::Consumer.
Also, Crypt::DH freezes while running make test.
*The GBrowse installation cpan downloaded is missing
gbrowse_syn_load_alignment_database.pl and
gbrowse_syn_load_alignments_msa.pl I had to copy them from the svn checkout
in order to install it.
*Bio::Graphics::FeatureFile is not getting installed automatically. I'm know
it's supposed to get installed with Bio::Graphics, and I can see it listed
in the META.yml, but, weirdly, it never installs. I don't know if that's
because I had to manually finish the install, but cpan never tries to
install it.
Even after all that, I'm still getting the "landmark not found" error. So,
I'm wondering if anyone has gotten 2.0 up and running in Snow Leopard.
Thanks,
<PERSON><IP_ADDRESS>SVG, Safe<IP_ADDRESS>World, and Net<IP_ADDRESS>OpenID<IP_ADDRESS>Consumer.
Also, Crypt<IP_ADDRESS>DH freezes while running make test.
*The GBrowse installation cpan downloaded is missing
gbrowse_syn_load_alignment_database.pl and
gbrowse_syn_load_alignments_msa.pl I had to copy them from the svn checkout
in order to install it.
*Bio<IP_ADDRESS>Graphics<IP_ADDRESS>FeatureFile is not getting installed automatically. I'm know
it's supposed to get installed with Bio<IP_ADDRESS>Graphics, and I can see it listed
in the META.yml, but, weirdly, it never installs. I don't know if that's
because I had to manually finish the install, but cpan never tries to
install it.
Even after all that, I'm still getting the "landmark not found" error. So,
I'm wondering if anyone has gotten 2.0 up and running in Snow Leopard.
Thanks,
Nathan Liles
|
036645c4-d8c6-86cf-4720-efd5ff1a5532
|
['26ffd30f-76b4-bfe5-e008-67707ee6cf8d']
|
Hi,
I've posted the following message in the sqwebmail
list and was referred to this list since it was a
known vpopmail bug. Please let me know how to fix it.
I've had a problem using login name shorter than 8
characters. I can create but could not login with it.
Whenever I try to login with sqwebmail, it generates
an error "invalid user login or password". I can do
mail forwarding to an account with more than 8
characters and it works fine. I did not have this
problem in the older sqwebmail version (2.x). Please
let me know if you encountered this problem and got a
fix for it. My system is: Redhat 8.0, qmail 1.3,
vpopmail 5.21., sqwebmail 3.5.3.
Thanks a lot...
|
a0a4b1be-b161-c58c-c0ab-48d0edc29cb4
|
['26ffd30f-76b4-bfe5-e008-67707ee6cf8d']
|
Hi,
I've managed to install and configure qmail, vpopmail,
and sqwebmail (I think :)). When I've invoke the
sqwebmail using the browser:
http://www.mywebsite.com/cgi-bin/sqwebmail
I, then got to the login screen. However I don't know
what mail login I can use. I've tried two accounts
that I've created with vpopmail but it failed. Am I
missing something?
Thanks...
|
9b60c5e8-bdbc-3088-3ecb-79de49fedead
|
['27090989-a2b4-8e88-310d-b2a584ef1ae4']
|
I am about to embark on an unavoidable task to port a custom ORB
transport to OmniORB.
I found the small transport.txt document and have perused the tcp
transport code and the unix transport code.
The transport.txt document implies that it is also possible to plug in
at the GIOP level, but I cannot find any
examples of this.
Does anyone know of any other transport implementations or GIOP
replacements for omniORB that might
serve as examples to shorten my path?
Thanks,
<PERSON>
|
0022b36c-d04f-1437-aab6-ba0ed3b655a2
|
['27090989-a2b4-8e88-310d-b2a584ef1ae4']
|
I am using omniORB 4.1.5, from a library that is itself autoconfd.
When I include "CORBA.h", it ends up including "acconfig.h", which has
all the autoconfig preprocessor symbols defined, including the "PACKAGE_*"
definitions. Of course this conflicts with these definitions from the
package I am building, which is just including "CORBA.h".
I'm not sure how this is supposed to work (one autoconf library using
another autoconf library), but I would imagine that there is some
way to keep such things separate, where the caller of a library is not
exposed to these things...
Am I configuring something wrong?
Thanks,
<PERSON>
|
03a1b6c8-4962-6da7-6f91-4f7767bcc1c0
|
['270fdecb-37d1-b311-4005-c23a047d01f2']
|
Hi.
I'm developing an application using APR on AS/400 (OS400) platform. As I
know only apr (no apr-utils) was ported to OS400 by IBM to run Apache2. Do
anyone know if there is any issue on compiling apr-utils on OS400?
When reading a book about AS/400 PASE porting package I found a reference
that Apache on OS400 is compiled using PASE. I guess that this refers to
Apache 1.x? Does Apache 2 (APR) also use PASE to run on OS400?
BTW: Does anyone have a good link for HOWTOs,... about programming on
OS400? - I'm new to this platform so I'm confused by some
'strange' concepts :(
Best regards,
<PERSON>
|
e9daf952-ec4c-4c3e-c8e9-4a22005f9ff3
|
['270fdecb-37d1-b311-4005-c23a047d01f2']
|
Hi.
I want to use NT usernames / passwords from my PDC for loging in my
server. I also want to use NFS between various UNIX machines I have. The
problem is that I already have a database of username <-> UID maping (each
user that has an NT username got an unique UID when he got a username).
Now I want to translate this my UID database into winbindd UID tdb
database, however I don't know the format of TDB files.
Is there any document describing TDB format.
Does anyone have any better sugestion how to convert my database to tdb
format?
Regards,
<PERSON>
|
4d3ee680-d933-9724-56f2-1b7b9ac51f05
|
['2734e99d-459a-4170-4d43-0143cd9a2085']
|
How would you recommend to drop XML data into an sqlite DB? I am guessing there is more than one way.
I thought of importing XML into Excel, converting to csv, for further import into sqlite, now that I know how to import csv into sqlite ... almost always! But this seems like a long haul.
Cheers,
|
80f0eec0-12e1-2abd-30b6-1f725833e228
|
['2734e99d-459a-4170-4d43-0143cd9a2085']
|
Dear all,
A brief update on how I managed to solve the problem...thank you all for
you remarks and comments, since these were instrumental in the solution.
Indeed sqlite versions had to do a lot with the problem, where 3.8 can
handle csv imports, not without some glitches. I had to go in circles
several times to realize how to make sure I was always working on the right
sqlite version.
I also noticed that I had some problems with my data, for csv import
purposes, in the sqlite environment. This problem did NOT affect csv import
into MS Access.
The problem was a field with a very long blank string, something like 40
space-characters. Apparently the sqlite import engine was not able to
recognize the end of this string and was merging it with the next field,
causing as mismatch between the column field names and the data fields.
This mismatch would compound with every new line imported.
I found the solution by sheer luck. I added manually a new column in the
csv file (from Excel) with a formula to test if the blank field was empty
or text. This created a column filled with boolean values, which sqlite csv
import engine was able to recognize, hence delimiting the large string of
spaces...odd I know, but it worked!
Saludos/Cheers,
|
5b53679b-188d-0717-1d24-1272a2035233
|
['27377470-63ae-67ca-bcb7-7069aa1d02c0']
|
Hey folks,
It sounds like GNOME 3 is getting into testing. Like many of you, I
wasn't happy about it when it got into Fedora at work. However, I gave
it a try and now MUCH prefer it.
I wrote up a couple of blogs about my experience. This one describes how
to work with the new paradigm.
http://www.newt.com/debian/blog.html#love-gnome-3
If, after giving it a try, you're still not convinced, read this
blog which describes how to bring back the old UI.
http://www.newt.com/debian/blog.html#hate-gnome-3
These blogs were written for Fedora, so the Debian details may be a bit
different. I've been running stable for some time and am looking forward
to seeing GNOME 3 in stable.
Here are a couple of additional related blogs:
http://www.newt.com/debian/blog.html#gnome-3-desktop-metaphor
http://www.newt.com/debian/blog.html#gnome-3-cpu-temperature-applet
Hope these help!
|
05bfbfa3-d710-dc94-83be-6073eaeb5118
|
['27377470-63ae-67ca-bcb7-7069aa1d02c0']
|
Folks,
For those of you who have CVS Emacs checked out, can you please run a
quick experiment for me?
1. Make a link from mh-e/src/emacs to your copy of CVS Emacs (in my case it
was ../../emacs).
2. Ensure that D/emacs//// is in mh-e/src/CVS/Entries.
3. Run "cvs up".
Does "cvs up" recurse into the emacs directory? I'm hoping it does. If
it doesn't, can you offer any reasons why it works for me and not for
you? "cvs -version" on my system returns 1.12.9.
Thanks.
|
8b479aad-c519-4fd8-1d09-a7dc5f9060f5
|
['27567ba1-0a6b-04a3-4a3c-1a11832efc5c']
|
Hello,
I am having trouble with my index.html page. When you go to the URL I am
seeing double of my logo and double of the search and other buttons. You
can check out what I mean at
http://www.daemonracing.com/cgi-bin/daemonracing/index.html and you'll also
notice that on the Browsers tabs it will say *****PREVIEW*****..how can I
get rid of preview and all the other double stuff?..All I want is for the
double stuff to go away and keep the collapsible vertical category and also
get rid of the regular vertical category.any help anyone?
Thanks
<PERSON>
|
d6dcee2f-3948-72c2-d4ac-868d97265e48
|
['27567ba1-0a6b-04a3-4a3c-1a11832efc5c']
|
Hello,
I am having a small problem in my interchange page. Every time I go to the
index.html under content to edit the category section to be collapsible or
anything under the index.html and I click on save then publish my changes
won't take effect. When I go back to the index.html it is still the same as
if I never made any changes or saved them.any thoughts anyone?
Thanks
<PERSON>
|
6aca943b-236c-0a1e-a472-3b15dbcff9ce
|
['275c6a6b-3933-4552-ae71-647dc3250ff2']
|
hi ,
i am trying to read data from device and write data on device using
libusb-win32. But i have problems about writing on device.
my device has two endpoint (4,out) and (129,in). and i am using 32 bytes to
communicate. usb_interrupt_write always returns
-116 but usb_interrupt_read works well. what may be the problem?
thank you.
|
eae3b045-2cd3-ee9a-d676-8f8bc6796911
|
['275c6a6b-3933-4552-ae71-647dc3250ff2']
|
hi ,
i am trying to read data from device and write data on device using
libusb-win32. But i have problems about writing on device.
my device has two endpoint (4,out) and (129,in). and i am using 32 bytes to
communicate. usb_interrupt_write always returns -116 but usb_interrupt_read
works well. what may be the problem?
thank you.
|
d0e55479-e88c-0dac-5625-88e06ce729b1
|
['27664a37-6d73-56d4-b648-f72588d9be8e']
|
Hi EndNoters
I am having a problem linking to some databases using OpenUrl with
EndNote X. This problem does not exist outside of EndNote, ie. linking
from university databases to those databases works fine. Eg for Emerald
and Science Direct the SFX server just says "No fulltext available",
when we know that to be untrue. Has anyone else struck a similar problem
recently, and if so, have you worked out the reason?
Regards
<PERSON>
|
b52ec569-6ad9-7542-363e-cc645638125a
|
['27664a37-6d73-56d4-b648-f72588d9be8e']
|
Hi <PERSON>
Would it be possible to do a URL search for items starting with D:\Work etc to identify the references with pdf links, then select those references and use Change and Move Fields to shift link from URL field to "Link to pdf" field. The manual on p.193 gives an example of format for file path - if necessary you can put text in front of the old field.
<PERSON>
|
e0c919f3-e6d3-4c16-4c0e-27a56c6640b7
|
['27721b50-8fe9-40b5-ff64-dbac0c526cc0']
|
there was/is a pr 31254...
http://www.freebsd.org/cgi/query-pr.cgi?pr=31254
...which describes my problem. only difference is i am using gcc
3.2.1 20021119. when trying to compile w/ gcj32, error message is
produced...
gcj32: libgcj.spec: No such file or directory
...i am contacting the list as suggested in the pr (before
submitting my own pr). any suggestions (to get gcj32 get going)?
i will be more than happy to retest/reinstall gcc 32 if somebody can
confirm gcj32 works for them.
- parv
|
2c35b8e6-3918-c6a8-e95e-5fffcbf0ae0d
|
['27721b50-8fe9-40b5-ff64-dbac0c526cc0']
|
would anybody be interested in a perl program which displays
information about installed ports?
documentation (pod) is...
http://www103.pair.com/parv/comp/unix/doc/doc.bin/listpkg.perl.text
...and the program itself...
http://www103.pair.com/parv/comp/unix/bin/listpkg.perl
...currently it shows only a port's origin & name/version.
display of description/comment may be added later. but then
pkg_info already does that. (but it's -x option is case sensitive.)
i am 51% in favor of adding it.
one thing i want to know if the above is more than half the
duplication of some other effort or not.
thanks.
- parv
|
c82776db-c30d-2a1f-7fca-01377546a96c
|
['2775917d-5ad1-1d65-7e71-a1c8d22d097b']
|
Hi.
Maybe this topic have been discussed before.I apologize in this case.
I run an 'old' G4 500 MP with lamp 47 /motu asio/mix+ digi.
I'm very happy with the multiproc feature.
Since I'm considering to change for a '2001' Mac,I wonder if the dual MP
stuff is so efficient...
If some of you have experimented the comparison,what do you think about
the performance within LOGIC:
733 or 533 MP ?
Thanx in advance.
|
c9d6ec76-4b5e-a1f9-5e4e-75c94a9175ed
|
['2775917d-5ad1-1d65-7e71-a1c8d22d097b']
|
Do we really need this library (1.1.1) in the extension folder ?
Don't remember if PT 5.0.1 install this stuff itself or if I did that
manually !
I don't see any dsp reorganisation in Lamp when my mix farm goes "maxed
out"!
Something to see with old_plugs_with_new_farm or something like that ?
G4/500 MP
OS 904 Fr
Lamp 461
|
00a7fd10-9505-d7ae-f350-834ea61b932a
|
['277c7a2a-dd1f-b1fa-15cc-520e70b5b18a']
|
Has the been any consideration to adding the ability to give Roles to
Roles? I'm thinking of a situation where I assign the roles Staff and
Student in the root of my site. In some sub folder I may want to say all
Staff and Students are managers. I don't want to maintain the
permissions for both Staff and Students, only for Manager. I think
Oracle has something like this.
Just a point for discussion.
Thanks,
<PERSON>
|
8d685755-a1d5-4a60-038b-ce896e78d986
|
['277c7a2a-dd1f-b1fa-15cc-520e70b5b18a']
|
Howdy,
We have a Zope server behind an Apache Server. The Apache Server has
rewrite rules that check User Agents and redirect WebDAV clients to the
WebDAV port on the Zope machine. We would like to do this with Moziilla
Composer. However Mozilla composer sends the same User Agent as the
Mozilla browser (As best I can tell). Has anyone run into this? Is there
a way to differentiate between Mozillas browser and composer?
Thank you,
<PERSON>
|
9228eb33-d702-eee8-3ad4-7204ffbd8125
|
['2792f7d5-9b2d-4abe-122b-58ad7410fd25']
|
Would a kind OSX user please email me a copy of their "ShadowFilters.XML" file?
My filters crash my OSX Shadow Desktop (4.3.1.) when ever I attempt to use a custom filter.
I have hacked my xml file to death and no doubt I made a mistake somewhere in there.
I cleaned it out and left in some of my basic oldest filters, but it still refuses to work.
Rather than start from my old hacked pc version, I would welcome someone else's known working OSX version so I can start to see where I went wrong and then gradually start adding my filters back in one-by-one.
my email address is <PERSON> at databytesoftware dot com.
cheers
|
3ac46d37-67ae-cc5e-7300-f3e8f88f9a89
|
['2792f7d5-9b2d-4abe-122b-58ad7410fd25']
|
Hi <PERSON>, et. al.
I have another enhancement suggestion:
I recently imported my current clients org chart into shadow to
facilitate my understanding of their company in meetings, when they
say things like "oh so-and-so works for <PERSON> on the blah project",
then I can search for <PERSON> and see where he or she fits on the food
chain.
*(the line by line desktop shadow import thing appears to be buggy,
hierarchy info went wonky for some levels, but I don't plan on using
it much so its not the focus of this request)
The search thing however is akward as it finds the first match or
the next match from the current starting position, which is tedious
if I am searching on "<PERSON>" or "<PERSON>" rather than "Osama" which is
less common.
Some software makes use of a "pick-list" which pops up all matching
entries to your search criteria, and then the user "taps" on the
matching entry, effectively allowing the user to jump straight to
the desired record.
Is this an enhancement that would suit Shadow?
p.s. I did a search on my previous enhancement requests and
discovered that I bought my latest palm tx purely because I wanted
more screen real estate for shadow!
cheers
|
6f0b10bb-ecd2-1e42-9c54-8cedb0bc8c92
|
['279f82d7-1097-9f5a-e336-032d4d99bbe4']
|
HI
I have this javascript. When I poast my page to itselft based on the
data this sctipt is executed and loads a popup window. However, each
time I submit the page it is opening a new window. How to control my
javascript to allways focus on the same popup window.
In popup window , I display one page but redirected to a different site
in the popup.
example: popup link: mylink is a.jsp but that is redirected to www.yahoo.com
thanks
MANI
|
938b57b8-15f7-6d2a-500f-101bee841b41
|
['279f82d7-1097-9f5a-e336-032d4d99bbe4']
|
Hello All,
I have a requirement to show an animation while JSP/JHTML page is being
processed. I dont need to show any progress bar. I just have to show
some animation and after process is done, I need to display the web page.
What are the simple ways to display this.
thanks in advace,
Happy new year.
|
3158f85a-65e8-050f-2bb5-766f3aa5f4f7
|
['27a771c6-f860-c78d-b335-6bce04355583']
|
Using lirc_serial 0.7.2 with 2.6.13.8 Kernel (Slackware)
Ive replaced the hardware. Rebuilt the kernel , rebuilt lirc, banged head
on wall for the past 2 weeks over this.
irw sees the 0 coming from the remote and says so. The problem seems to
occurs when lirc tries to send the code.
Searching the list archive i seen another post with a similar problem. Does
anyone have any info on this problem?
I would be thankful for any help.
<PERSON><IP_ADDRESS> Kernel (Slackware)
Ive replaced the hardware. Rebuilt the kernel , rebuilt lirc, banged head
on wall for the past 2 weeks over this.
irw sees the 0 coming from the remote and says so. The problem seems to
occurs when lirc tries to send the code.
Searching the list archive i seen another post with a similar problem. Does
anyone have any info on this problem?
I would be thankful for any help.
Lee
|
a1c19685-c253-3034-e1c4-aff7f47afe0d
|
['27a771c6-f860-c78d-b335-6bce04355583']
|
Using lirc_serial 0.7.2 with 2.6 13.8 Kernel (Slackware)
Ive replaced the hardware. Rebuilt the kernel , rebuilt lirc, banged head
on wall for the past 2 weeks over this.
irw sees the 0 coming from the remote and says so. The problem seems to
occurs when lirc tries to send the code.
Searching the list archive i seen another post with a similar problem. Does
anyone have any info on this problem?
I would be thankful for any help.
<PERSON>
|
26dad56b-d256-1218-046f-749d54b33775
|
['27b05fcb-bfe4-f2d7-d831-bf02b2eb32d5']
|
Hi,
draft-08 seems to be missing definition on 'cost-constraints' field in
Filtered Cost Map and Endpoint Cost capability objects. The field is
shown in the IRD output example (section 7.6.3) and 'support for cost
constraints' is referenced in 7.7.3.2.3, but going through the pointers,
one arrives at 7.7.2.2.4 which defines only cost-modes and cost-types. I
think 7.7.3.2.4 needs to extend the capabilities defined in 7.7.2.2.4
and 7.7.5.1.4 should reference that.
Bye,
<PERSON><IP_ADDRESS>.3, but going through the pointers,
one arrives at <IP_ADDRESS>.4 which defines only cost-modes and cost-types. I
think <IP_ADDRESS>.4 needs to extend the capabilities defined in <IP_ADDRESS>.4
and <IP_ADDRESS>.4 should reference that.
Bye,
Robert
|
09691b01-1a69-a49a-e962-29051f7c0910
|
['27b05fcb-bfe4-f2d7-d831-bf02b2eb32d5']
|
Hi everyone,
since we are throwing discussion topics on the list, how about having
the ability for the client to specify which Address Types it is
interested in while executing a request to Map Filtering Service?
That will allow the clients to limit the size of the server response
when the server defines a multitude of address types. This is useful
even with IPv4/IPv6, as v4-only clients just do not care and will just
skip over any v6 addresses they encounter.
From protocol and implementation perspective it can be easily achieved
by adding an 'AddressType address-types<0..*>' field in
ReqFilteredNetworkMap.
Any thoughts?
Thanks,
<PERSON>
|
bfd8dd7c-5177-8fa1-c7e9-70c0f0a8610e
|
['27bb16f3-3e1e-23a9-eae2-4c2063bd7160']
|
I've been reviewing the preliminary information<http://circuitco.com/support/index.php?title=BeagleBoneBlack>about the next-gen BeagleBone. If I understand things correctly, there
will no longer be support for serial port debugging via the client USB
port. I see that there is a new serial debug header next to the P9
connector, and that the system manual recommends the purchase of a cable in
order to get USB access to the serial debug. Can this cable be used if any
capes are installed? It doesn't look like there's enough clearance for the
cable connector to fit. If not, how would we debug custom kernels with
capes installed? Will an HDMI monitor and USB keyboard be necessary for
this?
Thanks!
|
f261667d-2e01-8c93-5ab2-c60f724d2113
|
['27bb16f3-3e1e-23a9-eae2-4c2063bd7160']
|
I'm also trying to get SPI working with the 3.8 kernel. I created the
dts/dtsi files in
setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux/gnueabi/linux-mainline-3.8.6-r22b/git/arch/arm/boot/dts,
edited the Makefile in that directory and ended up with a file called
am335x-bone-spi.dtb after running bitbake. I copied this into the /boot
directory on the SD card but can't figure out how to modify uEnv.txt in
order to load it. Any hints? The 3.8 device trees are incredibly
confusing to me.
Thanks!
|
0f75ee4d-63cf-4157-8a94-6a1a410bfeed
|
['27bb79af-477d-8b56-ee35-bbb65fe4c113']
|
Hello all,
when I have clipboard=unnamedplus in my vimrc and paste something in
visual mode (over a selection) Vim always complains with:
E353: Nothing in register +
Pasting in normal mode and yanking to the X11 clipboard works fine.
This also happens with vim -u NONE.
I would appreciate any suggestions.
Best regards,
<PERSON>
|
f5a647a7-6d35-b98d-8ee5-44c499ede960
|
['27bb79af-477d-8b56-ee35-bbb65fe4c113']
|
Hello all,
what I really like about GNOME is that it handles hotplugging of
external monitors automatically at runtime. This is especially important
when using a docking station. When I come home and plug my laptop into
the docking station I want my desktop environment to disable the
laptop's display and configure the external monitor with my preferred
resolution instead. And vice versa.
GNOME handles this through the RandR-plugin of gnome-settings-daemon
[1][2] quite nicely. I would really like to see that in XFCE too. From
what I understand the best place for this would be xfsettingsd because
it runs in the background and could react to RRScreenChangeNotify events
of the X server.
I'm conviced this would be a valuable addition to XFCE for a lot of users.
Kind regards
<PERSON>
|
55d5eaee-c90e-8d9c-9c0b-e67ec3a2639a
|
['27d41a83-eef0-dcb7-15b9-c207eaa1e8dd']
|
Hi,
i patched libcapi20 without any errors and recompiled pppcapiplugin.
It works better, when i run 'pppd nodetach call something' all seems
normal, it displays that its calling the provider, but actually it
does nothing (the telephone here shows it when the computer is
connected to the internet).
Maybe libcapi works, but other things like the fritzcard drivers don't.
<PERSON>
|
ed7a2cfb-129b-347d-ed97-0bfc10de438b
|
['27d41a83-eef0-dcb7-15b9-c207eaa1e8dd']
|
Hi,
i think the problem with calling the pc before connecting is because
of the telephone system (but it works with other drivers).
But even when the computer is connected directly to the ntba, i have
problems, for example some connections are very slow and pings to many
servers dont work, mostly because the url cannot be resolved. But the
nameservers work, i only have this problem, when i connect to the
internet directly, when i connect through a gateway (another pc with a
fritzcard v2) it works perfect.
I also get no errors in dmesg or /dev/isdnctrl or /var/log/messages,
so i dont know where to search for a solution.
<PERSON>
|
f63a12ff-3f32-d39f-3b49-02ca5060f254
|
['27f66ae7-b00b-6024-4044-9dc10474d011']
|
Hello developer,
I want to use phApi in my softphone. I can complate audio part. But i
cann't fine way to get video in my phone. Is there a way in "phApi.dll" or
any other way to get video.
If there is a way(Of cource there is becoz it is used in Wengo phone)
then give me a flow of it. That how can i get video.
Thanx.
Regards,
<PERSON>
|
fb7b5745-f3e1-fffc-1377-85724ea1079a
|
['27f66ae7-b00b-6024-4044-9dc10474d011']
|
Hello all,
I want to develop system that can do RTP streaming. But for that i
want to use one of your dll(ortp.dll). Now the queation is that How
can i implement RTP useing this dll in C#.Net?
I also try forum but they call that i contect you direcly.
Regards,
<PERSON>
|
04c1d95b-d17f-6cca-057f-d29505fd7f15
|
['2803d379-0d5c-25a2-8631-dd9cf185f787']
|
This is from the Sunday Herald.
Revealed: amazing life of Scottish <PERSON>
Seventy years after the Spanish civil war, the efforts of 'forgotten'
activist <PERSON> are recognised.
By <PERSON> <http://www.sundayherald.com/np/Senay-Boztas.shtml>,
Arts Correspondent
SHE was dubbed the Scottish Scarlet Pimpernel for helping innocent
prisoners caught up in the chaos of the Spanish civil war.
Now the neglected story of <PERSON>, a free-thinking anarchist
jailed for her efforts in Barcelona, is to be told in a film marking the
war's 70th anniversary.
The film's producer, <PERSON>, said <PERSON>'s tale deserved to
gain wider recognition because she was an "amazing" woman who "placed
herself at the heart of the struggle".
Although <PERSON> is now remembered only by a few survivors, she was
once known worldwide for her efforts helping the Inter national Brigades
in the Spanish civil war.
She travelled to Spain to support the governing left-leaning Republicans
after General <PERSON>, a Nationalist and social conservative,
declared war on them in 1936.
The fighting lasted three years and ended in the defeat of the Republicans.
Born in 1909 to a working-class family in Motherwell, <PERSON> left
school at 16 and was active in the left-wing movement all her life.
Secretary of the Anti-Parliamentary Communist Movement in Glasgow, she
eventually worked for the United Socialist Movement (USM).
In 1936, the USM sent her to Barcelona to report back for the
organisation. There, she became the English-speaking propagandist for an
anarchist radio station, listened to in Europe and America.
She was behind some of the first reports on the 1937 May Riots, when
leftists turned against each other, resulting in death squads of
Stalinists assassinating prominent anarchists and 400 people being
killed in street fights in Barcelona. She also wrote for Scottish
newspapers.
<PERSON> often endangered her life in support of her cause. When
anarchists in the independent Marxist party, POUM, were rounded up in
June 1937, she visited them in prison, smuggling in letters and food and
helping some escape in borrowed clothes and on foreign ships.
She was imprisoned by <PERSON>'s secret police, but while the world
fretted about her disappearance, she organised hunger strikes among the
anarchist prisoners and smuggled out letters.
After questions about her absence in the Houses of Parliament and an
American newspaper campaign, supporters formed the Ethel MacDonald
Defence Committee. International pressure was applied and she was
deported to France, eventually returning to Glasgow disillusioned.
She told crowds of well-wishers: "I went to Spain full of hopes and
dreams. It promised the utopia realised. I return full of sadness,
dulled by the tragedy I have seen."
<PERSON>, who continued to campaign throughout her life against
Stalinist attacks on the POUM and the anarchists, died in 1960 of
multiple sclerosis.
<PERSON>, producer of the new film, came across her story while
working on the BAFTA-nominated documentary Against The Tide - <PERSON>, another International Brigades volunteer.
"The beauty of this story is not only that it is forgotten, but that it
shows what an extra ordinary path her life was to take: from humble
beginnings in Lanarkshire to Spain, where she would place herself at the
heart of a fierce struggle," she said.
The film, Ethel MacDonald - An Anarchist's Story, has won financial
backing from the European Commission and director <PERSON> is in
discussions with potential German co-producers.
The hour-long feature will mix reportage and drama to depict a
strong-minded feminist who demonstrated her bravery in the Spanish civil
war, but was never fully accepted on her return.
<PERSON> said: "It is a remarkable story of an individual who
struggles to achieve, virtually on her own," he said. "Even in
California, people were concerned for her safety when she was arrested
and the Scottish papers called her <PERSON>. She lived in a
menage-a-trois with other anarchists in Gibson Street in Glasgow. We
have interviewed one of them, <PERSON>, and he gives a remarkable
testimony."
Caldwell, who is 94 and lives in Glasgow, recalled: "We were separate
individuals who sometimes had it off a wee bit.
"When <PERSON> and I were in public, we were separate people ... sex had
nothing to do with other people.
"But she believed I could have as many friends as I liked and she could,
too."
He added: "Her broadcasts went down very well. Some of the American
newspapers said how pleasant her Scottish voice was. But <PERSON>'s mother
disapproved of her being with [one of her companions] <PERSON>. <PERSON> the
free lover, the atheist - she didn't want it. After <PERSON> died, none of
the family came near us at all."
<PERSON> life also features in a pamphlet published by <PERSON>, a senior lecturer at Anniesland College, Glasgow.
Relatives or acquaintances of <PERSON> who would like to contact
producer <PERSON> can telephone <PHONE_NUMBER>
|
6ab81103-8584-136c-f6c8-c39c3bc54374
|
['2803d379-0d5c-25a2-8631-dd9cf185f787']
|
Thanks very much for the solidarity from list members who have commented on
the Communist League's banning people from their meetings on the basis of
their association with me. For the past few years when I've seen them in
public, they have blown warm and cold towards me, lately refusing to even
say hello. I've been scratching my head trying to figure out what's bugging
them and the only thing which occurs to me is that the last time I talked to
any of them for any length of time, was on an anti-war demonstration a few
years ago around the time <PERSON> and his comrades were purged. I was
representing the Socialist Project in the Stop the War coalition and was
acting as a monitor on one of the mobilizations, when to much to my
surprise, I noticed a few of them, including <PERSON>, manning their
literature table at the south end of the square at Toronto City Hall. I say
surprise, because up to this time the Communist League had been totally
absent from the anti-war movement, characterizing the mobilizations, even
the 2,000,000 in London at the start of the war, as nationalist, and
primarily, anti-American.
So I was curious that there might have been a change of line. I asked
<PERSON> if this was the case, and he assured me, no, they still had that
same position, that he considered the demonstration that day to be primarily
"anti-American" and nationalist. "So you consider this mobilization today to
be reactionary?" I pressed him further, and he replied, "Yes." I repeated
the question again, just in case I hadn't heard him properly, and he replied
in the affirmative. At which point I expressed some surprise and asked him,
if that was the case, why was he there at the mobilization with his
literature table? He couldn't answer me. It didn't seem logical to me that
someone who claims to be a "Communist" would go to sell literature at an
event they considered "reactionary". Since then they may have softened
their line somewhat on the anti-war movement, but that was their position
then.
That was not a hostile discussion by any stretch of the imagination, but
clearly this group has great difficulty dealing with questions about their
line. Maybe in their minds this exchange has been elevated to the strange
concept of "violence-bated", as they say in their letter to <PERSON>,
banning him from the <PERSON> memorial. More than half the audience,
by some estimates, came from the American SWP- a sort of Potempkin Village
event of over 100 -- to give their small group inToronto some comfort. I'm
sure <PERSON> and <PERSON> weren't too keen on having too many
ex-comrades circulating among them and maybe talking about politics. Their
heavies, in a very rough manner removed <PERSON>, <PERSON>'s companion
from the event.
They are intent, it seems to me, on erecting a barrier so that it becomes
an act of disloyalty for any CL members to talk any of us, even socially.
And this is not the first time the SWP has been engaged in banning
ex-comrades from their events, as members of this list have mentioned.
<PERSON> tells me they banned him from attending <PERSON>
memorial meeting a few years ago. The sheer pettiness of these actions is
disgusting. Once a group begins to dine on the fruits of sectarianism, in my
experience, they never recover, and the CL has been eating that fruit for a
long time. Who knows where they'll end up? Such groups often operate on the
basis of a unique political pathology peculiar to the group, and which can
rationalize anything.
For the information of the list, I'm attaching two letters, one from me to
<PERSON> and the letter from <PERSON> to <PERSON> banning him
from the meeting.
<PERSON>
|
a7a5f074-702d-e371-89e9-af08c330679b
|
['281610ae-c929-c636-3174-d1d063b9cf53']
|
Hi all,
I am still having problems with the xul client authenticating to my
Redhat installation. Memcached seems to be functioning ok. At least, I
can telnet to it. I turned up the loglevel to 'debug' in
opensrf_core.xml to generate better logs. However, I am still not sure
where else to look. I could still use some help in interpreting them.
I am attaching the console output of the client, and the tail of the
osrfsys.log.
Thanks,
-dale
|
ffee5fad-e5a3-2f43-2441-d0c227d038f1
|
['281610ae-c929-c636-3174-d1d063b9cf53']
|
Hi all,
I'm using mxodbc with a Sybase odbc driver on ubuntu 12.04 with unixODBC
2.3x. I am accessing a Sybase database with a library charset called
marc-8. On Windows 7, I can access this database using mxodbc and
transmit the characters faithfully if I set the odbc manager to
Communication Charset = No Conversion, and possibly Client Charset = OEM
(although I think this last setting is getting ignored). On ubuntu with
unixodbc, my character data out of the box is getting mangled. Can you
tell me how to set the driver to use the same settings I have on my
Windows machine? I can't seem to find any info on the relevant
parameters for odbc.ini.
Thanks,
-dale
|
3db925ac-6343-9f2f-c9d6-1f2697178d48
|
['2838c0f0-acbb-0ccb-8eaf-7a2a37b03194']
|
Hi everyone,
I've read the documentation, and I don't think what I am trying to do is
possible, but I thought I'd ask here just in case I'm missing something,
as I think this would be great to be able to do; enter amounts as formulas.
For example, say I want to enter $123 less 10% in a transaction, rather
than working it out and then entering the result, wouldn't it be neat to
enter something like =123*0.9, like you can with a spreadsheet?
I've seen reference to formulas for interest calcs in scheduled
transactions, but not normal transaction (manual) entries.
Is something like that possible?
Cheers,
<PERSON>.
|
311cedde-6c5c-216b-8962-9ea664b0690a
|
['2838c0f0-acbb-0ccb-8eaf-7a2a37b03194']
|
Hi all,
I've been reading previous posts about virtual accounts.
I have an account that contains tax deductible and non tax deductible interest
charges.
Is the best way to deal with a situation like that to split the account into two
sub-accounts, and then manually split the interest charges into each sub
(virtual) account, or is there some other way to "combine" two accounts into one
"real" account for reconciliation purposes?
Are there any hidden traps with the above approach?
Cheers,
<PERSON>.
|
7518207b-b570-eba3-9ad9-b585c8a53cc8
|
['2841b405-024c-635e-2ac5-f5dac042959a']
|
Hi, I was just wondering if it was possible to not make the apache13 port
rely on perl 5.6 because I have perl 5.8 installed (/lang/perl5.8) and it
seems wasteful for it to install 5.6 from the ports as well just to compile
apache. Could you please make it look for the other perl (5.8) as well and not to
just rely on 5.6.
Thank you
|
b9820210-ec86-83e5-dd42-78551c3a37b5
|
['2841b405-024c-635e-2ac5-f5dac042959a']
|
Hello. I've recently setup a jabberd 2.0.6 server and it runs great and
I am running the mu conference module via JCR. Now what I was wondering
is, if I am in a group chat, is it possible to encrypt the chat itself.
What I mean by this is that all the incoming and outgoing text that is
exchanged between the server and my client are encrypted (I currently
use gaim on windows). I have SSL enabled on my jabber server and I made
gaim use TLS in the options. Do I have to do any other steps to ensure
that the conversation between the participants is secure?
Thank you
|
01d1a000-a212-c3c3-f191-050ea1f3e214
|
['2854f996-2762-53d2-c903-2d8b569c5775']
|
Hi all
I am a new user of Abaqus I have created simple cube shaped domain
and meshed with hexs. I have created and applied viscoelastic
material properties and created point load on center node of top face.
Now i would like to see stress relaxiation behavior of visco materials.
How can i simulate and print out stress-time graphic which shows me
that under constant force, stress relax with time ?
Can i increase duration of simulation to see complete relaxation
behavior let say for 3000 seconds ?
is there specific example or tutorial ?
Kind Regards.
Firat
|
e2da6949-c931-5305-86b4-037db34b5294
|
['2854f996-2762-53d2-c903-2d8b569c5775']
|
Hello everyone
I would like to compare results of abaqus viscoelastic model with
analytic solution of viscoelastic material under load. More clearly
is there sample/tutorial problem where stress or displacement in let
say simple geometry (2d surface or beam ) calculated analytically ?
I would like to see every step of calculation of center node
displacement of cube shaped viscoelastic body and compare with abaqus
calculated results.
Kind Regards
|
109206f4-ffe8-e15d-e91d-23c72fbab4e7
|
['28584816-1250-fbe5-070c-66fd701b870b']
|
Hello Tango-A
My name is Mike Markov and I wanted to announce that Baila Tango will be
hosting its international teacher conference in San Diego this April 2,3,4.
If you have never been to San Diego California, it is a beautiful place,
lovely beaches and many tango venues, almost something going on every night.
Metin Yazir will be giving a weekend workshop starting April 2nd with a
grand opening milonga with dinner; live music provided by our local group,
Gotango. Classes with Metin will also be held Saturday and Sunday. We are
currently trying to arrange helicopter tours of the city and county for
anyone interested. Anyone interested in further details, please visit
www.bailatango.com/sd or email myself at <EMAIL_ADDRESS><PERSON>
My name is <PERSON> and I wanted to announce that Baila Tango will be
hosting its international teacher conference in San Diego this April 2,3,4.
If you have never been to San Diego California, it is a beautiful place,
lovely beaches and many tango venues, almost something going on every night.
<PERSON> will be giving a weekend workshop starting April 2nd with a
grand opening milonga with dinner; live music provided by our local group,
Gotango. Classes with Metin will also be held Saturday and Sunday. We are
currently trying to arrange helicopter tours of the city and county for
anyone interested. Anyone interested in further details, please visit
www.bailatango.com/sd or email myself at mX+y6ZXMAWJlabw1@example.com.
Thank You and Take Care,
<PERSON>
|
e052b34f-5f50-2c16-3274-d7a5656bfb21
|
['28584816-1250-fbe5-070c-66fd701b870b']
|
Hello Tango-A,
Patrick and I (Mike) have updated our website regarding the April 2,3 & 4
tango meeting in Southern California in the North County of San Diego
(Encinitas) & workshop with Metin Yazir. I have updated useful travel
information and added some links for those interested in touring the area.
If there is any help or questions we can answer please let us know!
Please visit www.bailatango.com/sd for more details. I can negotiate a
helicopter tour if anyone is interested, but this needs to be booked in
advanced also. Take Care and we look forward to a great weekend!
My email is <EMAIL_ADDRESS><PERSON>,
<PERSON> and I (<PERSON>) have updated our website regarding the April 2,3 & 4
tango meeting in Southern California in the North County of San Diego
(Encinitas) & workshop with <PERSON>. I have updated useful travel
information and added some links for those interested in touring the area.
If there is any help or questions we can answer please let us know!
Please visit www.bailatango.com/sd for more details. I can negotiate a
helicopter tour if anyone is interested, but this needs to be booked in
advanced also. Take Care and we look forward to a great weekend!
My email is wFE3ZUuGmTcPWNO0@example.com
Sincerely,
<PERSON>
|
dd2ce701-9960-6f1f-4a40-c04455746f8b
|
['286902dd-5309-ac8b-3c9f-69ba771d0d46']
|
Hello Jukka,
At this point only 32-bit is supported on Windows, as there's only a 32-bit service wrapper (zie 'wrapper.exe').
I don't have any experience with the service wrapper itself (only with the installer).
So if you can help with acquiring a 64-bit service wrapper, I could then look into including this into the setup.
Regards,
<PERSON>
|
38f41f23-10e8-f0b5-65b5-ea9d9fbec37f
|
['286902dd-5309-ac8b-3c9f-69ba771d0d46']
|
Hello,
My name is <PERSON>.
I'm a spectrum wide application developer (analyst, design, programming, testing, user support, bug-fixing, etc.) for a company in the Netherlands.
Recently (this year) we created an application (using Delphi), which matches geo-data from different (secure) sources with each other.
Because this data was not always available as a service (and the data was to large to distribute), I started looking for a (web)service, which could 'host' that geo-data, so the application could request only parts of the complete set.
Then I found GeoServer as one of the first hits, and I was really positively surprised by all the possibilities the application has. We did not look very far for other solutions, because GeoServer looked so promising and showed some exceled behavior an performance during the first tests and the fact GeoServer showed very active development.
But as always all software has issues ( https://osgeo-org.atlassian.net/browse/GEOS-8683 ).
So now here I am - as a newby to GeoServer - offering to help with further development of GeoServer.
As I'm not a Java Developer, but a Windows Application Developer, for now I would like to help with tuning the Windows Installer.
I would suggest the following changes in the installer behavior:
* Never to overwrite/delete/add files in an existing 'data_dir'
* Suggest to the user to use a 'data_dir' outside the application directory
* Note: it's best to uninstall the software before upgrading, as the 'old' Windows Service Entry is removed and a new one is created
Maybe other issue might be changed in due time.
But for now these are the two issues I would like to change (I also need to learn NSIS first...)
Regards,
<PERSON>
|
948d4590-7eee-5d57-7bce-497b1f137205
|
['286bf037-af51-0849-62c7-0c6afd24b464']
|
Dear All,
here is my suexec log -
tail /var/log/httpd/suexec.log
cannot run as forbidden uid
all that i got from google is my uid (89) is below minimum
number allowed by suexec to execute CGI.
and I hv to recompile apache to change minimum number
is there any other workaround to do this other than recompilation
Regards,
<PERSON>
|
c274939c-2758-a89c-6c9d-49a8e22973e4
|
['286bf037-af51-0849-62c7-0c6afd24b464']
|
Hello All,
I use trac version <IP_ADDRESS>
In Admin - Ticket System - Milestones options I can Add & Modify Milestones
Here I can check "Completed" checkbox & specify completion date but if I
edit same completed milestone again, this checkbox is again unchecked with
current date in box below. There is no way to identify if that milestone was
completed in past.
Please let me know how to identify completed milestones in milestone admin
page
-Regards,
Pramila
|
7eaa8315-2118-8cb8-c5b0-d29f181406ed
|
['28730161-35f2-33a5-0ecd-50be5d08fc34']
|
Hello,
If my understand is correct, LLVM supports the address_space qualifier;
however, how I can add custom address spaces. Where I can declare them? For
clang (x86), I saw that address spaces #256 and #257 works well (I see the
generated code with the 'gs' and 'fs'), but when I select different ones, I
don't see any different.
Thanks in advance,
|
2bbdc178-7c6b-1b82-2b19-7e3d63316dad
|
['28730161-35f2-33a5-0ecd-50be5d08fc34']
|
Hello,
Following the tutorial "Kaleidoscope: Adding JIT and Optimizer Support", I
found a Segmentation fault when I try to execute it. I am new in the
neighbourhood, so I don't know what is wrong. Could you help me with that?
I am working with the last version of LLVM (2.5). The code in chapter 2 and
3 works good, but the code in the chapter 4 did not work.
Below are the detail of what I did.
Regards,
<PERSON>
|
45b4fcbf-79a0-ac59-5145-cbea9d306464
|
['2875183d-8fe1-0d7c-9eda-9e3b9252ef8f']
|
Hi,
Sorry if this is a bit off-topic but I thought I might be able to get some
info here. I have a Toshiba laptop with Intel 82852 integrated graphics and
XGA (1024x768) screen. I'm trying to upgrade it to an SXGA LCD panel. The
82852 chip supports resolutions of up to SXGA+ via LVDS and it can read
panel data so it can adjust the timing parameters accordingly. For some
reason it fails to revognize the new panel and the screen is messed up, even
in text mode. Is changing LVDS signal resolution something that can be done
via device drivers? Or perhaps the chip is programmed at boot time by
Toshiba BIOS to a fixed setting so that such upgrade is not possible?
Thanks for any info,
<PERSON>.
|
1631f28e-bfe1-bd3a-7e52-4bef1e34a52f
|
['2875183d-8fe1-0d7c-9eda-9e3b9252ef8f']
|
We can only get current time on our platform to the second precision, but there is a higher resolution system tick counter available. Looks like libcurl is using system ticks on Win32, does that mean that libcurl never needs actual current time (for like writing it out to headers or such) but only a monotonically increasing value? We are currently using the 1sec resolution clock for the curlx_tvnow port and it looks like switching to system ticks should be safe given its value doesn't wrap too often? Wondering if there will be any benefit of using higher-precision clock apart from getting more precise timing metrics?
Thanks,
<PERSON>
|
796bb806-28a6-6e94-81f9-7e298f50c519
|
['2881e6c8-6d02-cf42-f6de-8893d06694c6']
|
First of all, I apologize if someone else already posted the same
question before in this mailing list. I was unable to search for the
subject with the search tool because it seemed not to be working,
having got the following message:
"NOTICE (2006-06-21): Due to some problems in the recent mailman
upgrade, the June 2006 archives are being fixed and the search indexes
are being rebuilt. Please bear with us. -- GNOME sysadmin team"
My question is:
I have evolution setup with Ubuntu 6.06 and Debian Sarge, being the
version in Debian Sarge older than the one in Ubuntu 6.06.
I would like to know how could I easily get emails, calendars, contacts
etc synchronized between both, taking into account that they're not
connected, each one is in a separate hard drive rack, used at a time in
the same computer, what leaves me with the option to store the
necessary files in a media like a usb key, for example, and load in the
other hard drive. However, I don't know what are those files...
I noticed that there is an import option from the menu bar in evolution
but I could not find any export option to start the storage step.
I appreciate any help or guidance on this.
Thanks
|
f96f29e3-ec0d-513a-2369-bce53431a0d7
|
['2881e6c8-6d02-cf42-f6de-8893d06694c6']
|
I took another approach. I powered off my computer, unplugged the hard
drive and plug a spare hard drive.
I installed Debian in that spare hard drive, run alsaconf, and noticed
that the Gnome events sounds are not distorted; under GConf, there's
osssink and osssrc (respectively for audiosink and auidiosource); xmms
runs well but not with Alsa plugin, it rather uses esd plugin.
Considering the above, I would like to know if I am correct that are
certain files that could be copied from this fresh install into the
previous hard drive. If I am correct, what would be those files?
Thanks.
|
6d862e1f-610d-29ed-8878-d80087a75206
|
['288ab53d-8f58-597f-34ff-722f8243d3b8']
|
Dear all,
I run an example program in cooja. But I can not find the protocol configuration in the csc simulator script file. In the xml file, I can see the tags such as <events>, <motetype>, <moteinterface>, <interface_config>, etc. I wonder where the transport, mac and physical layer protocol are defined?
Another question is that when I run some example simulation csc program, there are some trace records displayed in mote output window. But I can not find those sentences in the script or source codes. Can someone give me a hint how to find them?
Thanks.
Regards,
<PERSON>
|
ad49b863-3b72-dbd2-2867-2de935ffbbd0
|
['288ab53d-8f58-597f-34ff-722f8243d3b8']
|
Hi all,
I create a project in cooja. But it seems the default transmission is multi-hop. How can I make all the nodes just transmit to a single one?
And I also notice there are some blue lines and black lines in the network window. Can someone explain what the meaning they are?
Thanks.
Regards,
<PERSON>
|
665a1447-6bc4-565f-c942-882248e0122b
|
['289434d9-b649-cf5b-6a70-f3844019899d']
|
They two go through different session.
Rtsp over tcp in live (of course, rtsp can go over udp)
Rtp&rtcp over udp.
Recommend you to capture packets by ethereal or other sniffer tools while running the testProgs of live.
The capture report is a great demo to understand how rtsp & rtp (rtcp) works.
Hope helps
|
a1b95e20-6722-4b2a-805a-d53e107864c0
|
['289434d9-b649-cf5b-6a70-f3844019899d']
|
Hi, all,
I try to develop a proxy (P) on a gateway between internal and external networks, this proxy should:
1. forward the rtsp request from internal client (C) to external media server (S);
2. forward the rtsp response from S to C;
3. forward the rtp, rtcp packets between S and C;
Is it possible for P to simply modify the source and destination address (and port number) of packets from S or C and forward them in order to implement the above goal?
I really have no idea on how to utilize live package to implement such a proxy.
Any advice or suggestion or demo?
Thanks.
|
203ef1de-0749-2f0e-6ef2-d52971494e77
|
['289becab-8cd2-19ca-8dbd-87579e5f9e7a']
|
Hi,
We have consul cluster with 3 consul servers in each datacenter say DC1 and
DC2. Now we want to join these clusters at WAN level so that we can query
between datacenters.
Question i have is, do we just need to join one consul server in DC1 with
one consul server in DC2 at WAN level ? or first i need to join 3 consul
server in DC1 at WAN level to each other, do the same step in DC2 then join
one consul server in DC1 with one consul server DC2 at WAN level so that
all 6 nodes become WAN members ?
Thanks,
<PERSON>
|
df2924bf-1106-b800-7dcf-4dc696f72290
|
['289becab-8cd2-19ca-8dbd-87579e5f9e7a']
|
Hi,
I have a consul cluster with 3 servers where i store some K/V data. I would
like to know if i can just get backup of this K/V data so that incase if my
3 servers have an issue, i can build another consul cluster and restore the
K/V data. I read about snapshots option would that help ?
Thanks,
Pradeep NSS
|
faa42685-008a-2e55-8f6f-f734a4c4454d
|
['28a2ef76-dee8-8951-5f76-e52d6ebbc653']
|
Long time ago I have posted about possible additional asynchronous
control flow operators. Basing on AsyncObjects experience, I have
updated the proposal and posted it e-rights wiki in order not to loose
this proposal again. See
"http://wiki.erights.org/wiki/Proposed_Asynchronous_Control_Flow_Operators".
I'm not completely sure where such things should be posted. On one
hand it is enhancement request, on other hand wiki provides better
facilities for text modification, formatting, and discussion then bug
tracking systems. So there should be possibly a category in the wiki
for language features under discussion.
Regards,
Constantine
|
739821b1-6384-38f9-ffc9-d05ba6c89ee0
|
['28a2ef76-dee8-8951-5f76-e52d6ebbc653']
|
I have released AsyncObjects 0.3.0 today. The biggest change is that
objects now implement their asynchronous interfaces. However the
implementation objects cannot be passed as first level arguments to
the messages. This should prevent most of cases of accidental sharing
of objects. Overall, it is now easier to create and maintain
asynchronous objects, but the resulting code is more verbose.
Constantine
|
72f1c913-4e78-bc6f-43af-cab45bb22b16
|
['28b87691-d698-1a0e-289c-de74b9ace410']
|
Hi, I am trying to create a scene where I have a model in the center of
view that can be rotated about with the camera (currently using a
vtkRenderWindowInteractor) but I want to have a floor plane that stay
constant. Is there a way to remove an actor from the interactor's control
or to apply a reverse transform on the object?
Thanks
|
daf4656c-67b7-eb48-c7dc-d07368403875
|
['28b87691-d698-1a0e-289c-de74b9ace410']
|
Hi,
I've got an MRI dataset that I need to show using isosurfaces but the data
has a lot of noise in what should be the empty space region resulting in a
large density of static type dots that are drawn in the box around the knee
represented by the MRI. Does anyone know any techniques that might be
useful in cleaning out the extra noise?
Thanks,
-Doug
|
b5de04a0-b1b3-01cc-07e0-4ccf90fe10ce
|
['28d65c0d-ce21-08bf-fcda-9554f3a87c4a']
|
<PERSON> asked for feedback on the Yast autoinstal module.
Her it goes.
I don't get it. It sets up a ftp/http/nfs share and that's it. I don't get
any documentation except for the help buttons in the module and those does
not give out much. In the normal "Help" function on the start menu there is
nothing except standard KDE information.( in khelpcenter)
Going in to yast i find the two SUSE documentation modules and add those
susehelp_en-2007.08.22-80.46 and susehelp-2007.08.22-80.46. Should not those
be installed by default? There were no susehelp modules installed.
But still no suse help in khelpcenter even after restarting the app. No new
items to index.
now checking the/usr/share/doc/packages/susehelp/README. Adds Apache and
folow "How to start: just point your browser to http://localhost/susehelp/"
and gets a 404....
No information on how it's ment to be used on the booting client is given in
the yast module. Do I need a boot disk? If so , then there definately should
be a wizzard assisting with that.
It definately does not set up a network boot as I was expecting. there is
no atftp or tftp server set up. I would like to "Press F12 for network boot"
and install from there. We use this at work in conjunction with autoyast and
it's fabulous. but horribly hard to set up and maintain.
I also checked in on the Autoyast yast module. That does still not set up
anything but the autoyast file as far as I could find out. It does not have
any tftp integration and no integration with the installserver as far as I
can see.
Sorry that I did not test teis earlier and I do not think it looks usable for
anyone but hardcore users.
Birger
|
36bde1a5-1ad0-b6b7-3eeb-59c56f1c4146
|
['28d65c0d-ce21-08bf-fcda-9554f3a87c4a']
|
Hi ,
We just finished a systems for the family with a MSI G965M mainboard.
The board installed well but came up with a VESA driver in stead of
"i810".
<PERSON> seems not to be able to identify the graphics controller (X3000).
Is there some information that I can collect to input to a bug report
on <PERSON> on this?
I understand that this chip is supported in Xorg 7.2. I changed the
driver to i810 in the xorg.conf file and from the Xorg.0.log it loads
the driver and it detects the 965 gfx chip.
Although I did change the Xorg.conf file manually and set the driver
to i810, the graphics performance does not seem to be great, so as a
second request, it would be nice if someone could share their
xorg.conf file with me to compare. (I get around 900 in glxgears)
Regards <PERSON>
|
defbad0c-a286-5782-7057-913da3558efa
|
['2917da93-3c03-1144-f743-c4ecad3956ee']
|
Hello all !
The mediagoblin's 'fork' http://coomute.net is currently on a testing
phase.
This platform is a mediagoblin's plugin that add many many features such
as :
- band/album/tracks organisation
- multiupload
- playlist streaming (ajax)
and more....
It aims to be exclusively copyleft (the most restrictive licenses
available are P2Pl and by-nc-sa) and to provide those artists a state of
the art libre and ad-free platform.
I'm looking for people to try it out and give me feedback on the overall
design.
Also, I really hope to give back to mediagoblin and if you see a feature
that should be made into a standalone plugin : please let me know (if
you can help me with this : let me know even more)
http://coomute.net
https://github.com/coomute/JoshuaGoblin/tree/joshuagoblin/mediagoblin/plugins/dogma
freenode:#coomute
All the best
Tumulte
|
65b456b9-c91a-f864-4351-2da8d76c20c0
|
['2917da93-3c03-1144-f743-c4ecad3956ee']
|
Hello all !
The mediagoblin's 'fork' http://coomute.net is currently on a testing phase.
This platform is a mediagoblin's plugin that add many many features such
as :
- band/album/tracks organisation
- multiupload
- playlist streaming (ajax)
and more....
It aims to be exclusively copyleft (the most restrictive licenses
available are P2Pl and by-nc-sa) and to provide those artists a state of
the art libre and ad-free platform.
I'm looking for people to try it out and give me feedback on the overall
design.
Also, I really hope to give back to mediagoblin and if you see a feature
that should be made into a standalone plugin : please let me know (if
you can help me with this : let me know even more)
http://coomute.net
https://github.com/coomute/JoshuaGoblin/tree/joshuagoblin/mediagoblin/plugins/dogma
freenode:#coomute
All the best
Tumulte
|
8ff603b5-3125-d226-1736-084f0b4b3980
|
['294c2264-6cd6-049c-ca08-fce5d75e59a0']
|
hi
i'm on ubuntu 64 bit
i've been trying to use the new "Audio" button next to the Render buttons
i tried it both in my local daily builds
and now in the "official" version found here
http://download.blender.org/release/Blender2.70/
an audio file gets always created
but just a couple of bytes big
i don't have any sound problems within the Video Sequence Editor
when i render an animation with sound
any info on how to correctly use that button ?
thanks
inS
|
e26b36d1-8d1d-8acf-4673-6e182823ec15
|
['294c2264-6cd6-049c-ca08-fce5d75e59a0']
|
hi
i just updated svn
the compilation goes ok
but when i try to run the newly compiled binary
i get:
Segmentation fault (core dumped)
i did another svn update this morning
and then everything was ok
also the official blender 2.64 version downloaded from blender.org runs ok here
is this due to a recent svn checkin
or is it a problem on my end ?
ubuntu 12.04 32 bit
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
thanks for any help
regards
inS
|
0e95f619-a579-dee2-a22c-94f460c97cd0
|
['294c5019-7413-fe7c-f8e8-02f76ffc0a96']
|
Hi !
I have installed Bind-9.2.1 on a Solaris8 Ultra-10 machine.
Now I would like to know which named.conf to be copied for a good start?
May be a very silly question,,,
I could not find named.conf by default under /etc/
By the way,,mine is a test setup with a hub and another couple of
machines with same subnet sitting over a hub.
I 'll keep trying,,but your advice may help to get there faster...
Thanks in advance...
<PERSON>
|
b598a29f-7678-6d81-04a9-aa93a426cfd0
|
['294c5019-7413-fe7c-f8e8-02f76ffc0a96']
|
Hi!
I have installed bind-9.2.1 in a Solaris8 machine. I am still reading
the documentaion and howto and parallelly trying out on my work station.
I have these 3 work stations sitting over a hub. I started with
caching-only type configuration.
When I am running /usr/local/sbin/./named I found the following error
binding TCP socket: address in use
I could not make out. Though I found similar query in the listings,
answers were in german(am i right? :)) ,,can any body translate it to
english?
Thanks in advance.
<PERSON>
|
82996d5c-5d91-412a-b9d7-3bfa785a9565
|
['295be4ac-9906-4e57-02a9-9b6f8b50527d']
|
I've been noticing various display anomalies when using the latest Emacs
26.1.91 pretest. Some cases are hard to capture or categorize, but it
seems like I'm seeing more "flashing" for redisplay than I usually do.
The case I was able to capture was when using tramp.
If I create a new tramp connection (after calling M-x
tramp-cleanup-all-connections), I see a strangely blank screen from
after calling the command (say C-x C-f "/-:slc:") until the directory
gets displayed. Please see the attached picture.
That blank screen behavior is new. In 26.1, the frame contents continue
to be displayed while the command is running.
- Tim
|
0e4c1623-9d5b-22ef-2ee0-8a987db2fb22
|
['295be4ac-9906-4e57-02a9-9b6f8b50527d']
|
When using this nightly Emacs build, I noticed that C-x C-f was not
responding correctly to the normal tramp syntax.
After starting up with 'emacs -Q', I did:
C-x C-f /scp:slc:<RET>
("slc" is the name of my remote host.)
The message area displayed:
File not found and directory write-protected
The buffer showing was named "scp:slc:", so it seemed to think I was
talking about a local file.
Note that when I type C-x C-f in the 26.1 pretest version, the default
directory is "~/", but it is "/" in the nightly. Not sure if that is
significant.
Note that, following instructions, I did M-: (setq tramp-verbose 6)
prior to calling C-x C-f, but there did not seem to be a tramp debug
trace generated. I'm guessing that the problem is happening earlier and
the command is deciding to not invoke tramp at all.
<PERSON>
|
acdd0500-8369-1708-1982-ce596863f274
|
['296d3f4e-4113-23f5-c8ea-54b69c6bbb5d']
|
Hi all,
I am a new comer to webkit and I am looking into adding some new security features to help mitigate XSS attacks and improve mashup security for webkit.
I am currently trying to find where the javascript core connects the webcore DOM APIs. For example, upon receiving a piece of script which contains document.write/document.cookie, the javascript core needs to turn to WebCore/dom/Document.cpp. I want to find out how does the glue procedure between Javascript core and webcore go.
Also, where is the DOM tree constructed and stored? Can you point me to the related source code is possible?
Many thanks in advance.
Best,
|
58b857df-bab0-53d5-f751-d8a55c39ea29
|
['296d3f4e-4113-23f5-c8ea-54b69c6bbb5d']
|
Hi all-
I am newbie to webkit dev and I am trying to debug Webkit with gdb. I tried to build the Qtwebkit with ./build-webkit --debug --qt, and then gdb WebKitBuild/Debug/bin/QtTestBrowser, however seems gdb was not able to add breakpoints for class<IP_ADDRESS>functions. It cannot find them. I wonder what is the debugging process for Qtwebkit.
Thanks all,
|
8de324c3-7163-00b2-fcf9-a3833c71fcb1
|
['296ddc97-4d7a-7850-f0b8-c9269d8fdd92']
|
I tried logging a ticket in the tracker about this but got no reply. Since
Hudson 1.352, no more releases have been pushed to the Debian apt repository
and we're currently at Husdon 1.355. You can see here:
http://hudson-ci.org/debian/binary/ - I guess something has gone wrong with
the automation?
Please can someone look at this matter?
<PERSON>
|
806fd408-8546-6d23-4b62-0f942224c4d4
|
['296ddc97-4d7a-7850-f0b8-c9269d8fdd92']
|
I dont like the idea of putting the min fee in the hands of the receiver.
Seems like that will work against the best interests of senders in the long
run.
Why not try a different path of calculating the min fee like difficulty
retarget. You can analyse the last 2016 blocks to find the average fee
accepted per kb (which would include transactions that were included
without fees) and then write that into the block as a soft recommendation
that wallets could use in the UI. This way the price can vary up and down
according to what people were willing to spend on fees and miners willing
to accept.
I absolutely do not trust vendors to set fees. I think it has to be based
on what senders are willing to pay and what miners are willing to accept.
<PERSON>
|
22426304-492d-5a3b-44a2-4dd42a9936d6
|
['297ee65e-5af3-ec8a-5111-0b75d7548fd7']
|
http://leech.mozdev.org/notes.html#41
Yeah, I have WinXP Pro SP1 and Moz 1.2.1 Netscape 7.01 also had Moz 1.3a and leech doesn't work on any of them.
It'll run wget but doesn't pass the url to it, so wget closes right up instantly. Also, "Basic" and "Seperate" downloads do absolutely nothing.
Is there a faq I'm not finding? Is this a bug?
mailto:<EMAIL_ADDRESS>
|
58ce5d5b-9c28-e018-29ae-d8a653f00914
|
['297ee65e-5af3-ec8a-5111-0b75d7548fd7']
|
http://leech.mozdev.org/notes.html#47
Hi <PERSON>, Your name sounds german to me, same here. I have gotten the wget-1.8.2b.zip, extracted them, but didnt
find a wget.exe!
Will try to find sslibs-096-stable-snap-20020916.zip
Where should I install the wget-directory, in the Mozilla
directory or just under c:\programs?
I already have installed the leech-plugin, which it says I should install AFTER wget-installation. How do I unin-
stall leech?
Many thanks for taking the time to help a beginner
<PERSON>
|
178dde36-edc1-4102-0c99-c9c4ea5efde0
|
['298bbe5b-d087-9c2b-a1a1-5ae7f449b77b']
|
Dear all,
I am newbie to LyX. I have recently started using LyX for writing documents
and I personally like LyX for various reasons like productivity,
appearance, feel, writing style etc.
Recently I was writing my paper for IEEE Transaction using IEEE Transaction
document class in LyX however, I could not find "Acknowledgement" section
in the LyX.
The acknowledgement is usually written at the end of the first column in
the first page of IEEE Transaction papers. It contains basic information
about authors like their affiliations.
For example, in the attached file I highlight the part which I meant to.
I need to ask how can I add such information. I try on various forums in
the internet but no where my issue is resolved.
Thanks,
<PERSON>
|
70f3aa16-baad-a129-800f-138c8ec513ac
|
['298bbe5b-d087-9c2b-a1a1-5ae7f449b77b']
|
Hello LyX development team,
I recently started using LyX for writing Tex documents and I personally
like LyX for various reasons like productivity, appearance, feel, writing
style etc.
While recently I was writing my paper for IEEE Transaction using IEEE
Transaction template provided in LyX but I could not find "Acknowledgement"
section which is usually in the end of first column in the first page of
IEEE Transaction papers. It contains basic information about authors like
their affiliations.
For example, in the attached I highlight the part which I meant to.
I need to ask you how can I add such information in my paper. I try on
various forums in the internet but no where my issue is resolved.
Thanks,
<PERSON>
|
9b212c91-ee1b-561a-d75a-5b7b6ba5457b
|
['298e1793-0ad7-c6e2-1eff-3047ab664a69']
|
Hi,
I was checking that there are two errors on default captiveportal.html file.
on post section the action value is actually "$" and not "$PORTAL_ACTION$"
and redirurl value is "$" and not "$PORTAL_REDIRURL$".
Those errors add the $ character to the URL that the user are requesting. and on
many cases the incorrect URL.
I know that there are the right instructions on services_captiveportal.php on
section "Portal page contents" but the default file must be the right values
too. because anyone want to test captive portal and want to work with the
default page before create his "fancy" page.
regards,
|
3d9882ba-ae3d-7837-9703-112a8d59c41a
|
['298e1793-0ad7-c6e2-1eff-3047ab664a69']
|
Hi, i'm new on this block. :)
I was trying to enable captive portal username. but when i was add button i got
this error
XML error: not well-formed (invalid token) at line 244
pfsense was frozen, i try to reboot, only on third time was sucessfull the
reboot.
whene pfense was upping his services, the messaage " XML error: not well-formed
(invalid token) at line 244 " was already there.
on this moment the pfsense is inaccesible by https. i use the console but when
i try ifconfig my LAN IP and WAN IP there aren't.
I think that the cnofig was corrupted. all the services are down. because i'm
new i'm not have idea where are the files that you need to see.
my version is 0.59-BooeyBooey
built on Tue Apr 05 12:50:00 CEST 2005
regards,
|
89f1fb87-6027-6ccf-b365-454692974294
|
['2994c48a-fce5-6c97-d047-9bae6c333a1b']
|
Hi,
I am intending to perform pulling run for umbrella sampling, on my coarse
grained DNA protein system where I have a bundle containing 20 DNAs and
proteins. I want to pull 1 DNA out of this bundle to perform Umbrella
Sampling. I was going through this tutorial
http://www.bevanlab.biochem.vt.edu/Pages/Personal/justin/gmx-tutorials/umbrella/05_pull.html.
So since I want to pull 1 DNA out of the bundle, I would like to position
restrain the atoms of the other 19 DNAs. But as mentioned here
http://www.gromacs.org/Documentation/How-tos/Position_Restraints, I need to
add the position restraints under the molecule type of DNA, in my .top
file, but then shouldn't it restrain the atoms of all the 20 DNAs? How can
I restrain the atoms of other 19 DNAs, except the DNA that I am pulling?
I would highly appreciate any help.
Thank you very much,
Regards,
Arnab
|
84f67361-b0c7-3b19-1195-eafaa0134b30
|
['2994c48a-fce5-6c97-d047-9bae6c333a1b']
|
Hi,
I am trying to understand the comm-mode option in .mdp. I am simulating a
DNA protein system with electric field. Now, if I understand correctly the
comm-mode option, if I set it to linear, and comm-grps to System, it will
remove the velocity of COM velocity of the system. But here I want to
compute the velocity of COM of protein (which is positively charged and
moves in the direction of the applied field). Here I am using Langevin
dynamics. So my question here is comm-mode option, as it removes the
velocity of COM, does it also rescale the coordinates? If I run the same
simulation by using the option comm-mode = Linear, and for other case
comm-mode = None, in these 2 cases I should get different trajectories,
right?
Also, since for my case the protein and ions are driven by the field, I set
comm-grps = DNA_W, which is the group containing all DNA and water atoms
(here the DNA is position restrained). Is this the right thing to do here?
Or should I use comm-grps = none? I am confused here.
I would highly appreciate any help!
Thank you in advance.
Regards,
Arnab
|
34c8afc6-2ccd-a048-9b8c-6e9896fabb68
|
['299ff5ac-bc3d-9f90-c11b-860b07f8e0e8']
|
Hi,
I noticed that the spinner is smaller in Galeon than Epiphany. I am
using the latest 1.3.12 and 1.0.7 respectively. Is there anyway to
make the spinner bigger?
Also, congrats to the developers on this latest release. I have now
have a tough choice between Epiphany and Galeon. Both are really
great! Maybe I won't choose!
Regards....<PERSON>
|
58decc5a-d947-e569-a69f-5e683e910137
|
['299ff5ac-bc3d-9f90-c11b-860b07f8e0e8']
|
Hi,
I was wondering if there is a timeline for Galeon 2.0? I find it
pretty stable already and am using 1.3.14a. Is there a strong desire
to work on Galeon and for users to have it? I worry because of the
competition from Epiphany and Firefox.
Since Firefox has been around, the Epiphany and Galeon communities
seem fairly quiet. When Galeon started there was no light-weight
browser from Mozilla and people embraced Galeon pretty quickly, but it
seems Firefox has changed all that. What do others think?
I'm just trying to get a feel for the future.
Thanks....<PERSON>
|
2a726eaa-34d4-d628-948b-f7f1586c1629
|
['29a19ab2-b741-a813-ea9c-6e7df5b412dc']
|
Hi everybody.
I am about to relocate all my recorded Audio and Sample Library in a
new larger internal
drive.
The drive I am about to replace was dedicated to Audio/Samples only
and was partitioned
in two volumes, one for Audio, the other for Samples.
My question to you guys is:
Is it important or beneficial to have Audio and Samples in their
separate partitions within
the same hard drive just like described above or is it useless?
I would rather not split up the new drive this time just because I
hate to commit to
predetermined Volume sizes only to end up with insufficient space in
one partition and
excess of space in the other.
And just in case it matters, I am running Logic Pro 6.4.1 on a
Quicksilver Dual 1Ghz Mac/
1.5GIG of Ram with RME HDSP/Digiface+UAD-1.
Thank you all very much in advance for any tip on the subject.
<PERSON>
|
f6a6506f-829d-9726-092f-25744cec33dd
|
['29a19ab2-b741-a813-ea9c-6e7df5b412dc']
|
Hello guys.
Today a guy that apparently is connected to some people from Apple told me that
partitioning the System drive is not a good idea in OSX (now 10.4.5 in my case).
Would anybody confirm this as true?
I am having problem with Logic 7 (now 7.2) losing automation and losing instruments all
the time.
I know, these are known bugs but none of the people I know have to reboot Logic
CONSTANTLY as I do.
The automation thing is been happening to me for quite a while but not nearly as much as
lately (2-3 times per hour or more).
Since all the music that's been done has started from my Autoload, I am beginning to
suspect that the Autoload itself could be corrupted. Should I rebuild it from scratch? Trash
the preferences? CCC my system and reinstall it in a non partitioned drive?
FWIW, the computer is a G5 2.7 6.5 Gig of ram OS 10.4.5 Logic 7.2 RME HDSP/Digiface.
All my samples are on a 500G Lacie FW800 drive. Audio is recorded on a second internal
drive (AUDIO DRIVE) and the Audio samples related to Audio Instruments other that ESX24
(like RMX, Ivory, Absynth etc..) are also located in the same AUDIO DRIVE.
Any help would be highly appreciated.
Thank you.
<PERSON>
|
e672d671-ce5c-22f2-1584-d9255d9da302
|
['29b914d3-aca1-0ff9-79ed-0281481f6c44']
|
Absolutely Normal. Why are you concerned about the number of threads? If you really want to reduce resource usage lower the minProcessors value of your connector(s) to something like 2-3. If you want to see what the threads are doing do a Ctrl-break in your Tomcat window and take a look at the thread stack traces.
Personally, I wouldn't worry too much about trying to reduce the number of threads in the Tomcat process...threads are pretty darned light-weight.
<PERSON>
|
aec2d8ad-f3af-bce3-fedf-09f0773d9365
|
['29b914d3-aca1-0ff9-79ed-0281481f6c44']
|
Do you want to add new contexts or new virtual hosts? The term 'mass hosting' sort of implies (in my mind anyway) an ISP-type scenario with many virtual hosts. If you really mean contexts, just make sure your Host element has autoDeploy and liveDeploy enabled and it will automatically deploy new webapps as they are dropped into the appBase directory.
HTH,
-chris
|
4b4d8dbc-109e-0bb0-64db-0723d1eb7474
|
['29c704ce-cc78-1571-59a4-d0929d347516']
|
Hi;
Short version: am trying to combine login widgetry with per-user
navigation. My lazy protected navigation functions are getting called and
their HTML are being sent for the first user, but for the next different
user, while the functions to generate the new user's HTML are getting
called, the previous user's results are still sent back (as saved as
:selector children in the nav widget - boy was this tough to track down).
Is there some canonical weblocks way to "reset" the session (widget tree,
etc.) after a logout? Or should I be going about this entirely in some
other way (?user-id=12345 with an on-demand-selector)?
I am NOT using with-flow (googling the weblocks support group appeared to
argue against doing that), but using the login/protected-nav code from
here<http://paste.lisp.org/+2JQR/5>...
The fact that this example code has the login widget living inside the
top-level nav makes it problematic to defer the creation of the top-level
nav (so as to be customized per-user) until after the authentication. I
figure this has to be a well-understood weblocks problem with an equally
well-understood problem - sorry my Google/Lisp skills are not up to finding
it...
I did do the obvious thing of redirecting the non-privileged user to the
non-privileged page (worked fine), but the privileged page is still being
generated, and it's a simple matter to defeat the redirect by simply typing
in the privileged page URL.
FYI I am using quicklisp-load weblocks vintage weblocks-20110730-hg, which
differs from weblocks-dev (as fetched by hg) by only a few lines. Platform
is Linux FC16 x86_64 running SBCL <IP_ADDRESS>.
Thanks,
|
e9b2dd5c-921f-45fa-7a99-b15f54af7b7b
|
['29c704ce-cc78-1571-59a4-d0929d347516']
|
Hi All;
The subject line is the Short Version of the question, and I am sorry
if it a real dumb one, but I would appreciate being pointed in the
right direction.
I have a webapp using one of the many versions of "login-maybe"
authentication logic that has crossed this list. My custom Weblocks
widget render-widget-body method spits out HTML with lots of :img icon
URLs.
The set of such icons/images is large, and the icons: are going to be
requested kind of a lot; are NOT part of the webapp proper; thus do
NOT live in pub/images; are independently version-controlled; and are
part of a larger collection of other types of files (which may also
need to be served later, WebDAV-style). I am currently successfully
using a Hunchentoot easy-handler to serve them (although I have not
tried to check any authentication-related session vars).
To recap: I would like to serve up the icons only to authenticated
users. I presume I would be smart to do this in browser-cache and
proxy-cache ways so that image requests can get served out of some
sort of memcache/squid server, transparently to weblocks and the user.
Finally, I would like to package the image serving along with the
custom widgetry in a weblocks "contrib" friendly way (and the
Hunchentoot easy-handler doesn't seem that pretty in a modularity-sort
of way).
Which is the smart plan?
Plan (1): add checking of the authentication logic to the Hunchentoot
easy-handler (whose :uri does not share the most-significant webapp
token with the webapp).
Plan (2): push a Hunchentoot create-static-file-dispatcher-and-handler
onto the *dispatch-table* and try to figure out how to get at the
authentication session info from there
Plan (3): leave it as-is and admit defeat (maybe rationalizing this by
using Hunchentoot's in-memory image serving in a quest for speed)...
Plan (4): something else????? URL rewriting to derive
authenticated-p?
Thanks in advance,
|
5049150b-c496-fffd-5665-acba16ceeece
|
['29ceb13a-b32d-efcc-133b-516345f6958d']
|
Hello,
I am trying to evaluate jmeter for the task, so far I am not sure if jmeter
is the right tool. Anyhow,
Here is what I am trying to do....
I have a webserver which accepts multiple soap request. Each soap request
contains a file (txt, or html, or xml).
I want to test the maximum load for this webserver by generating multiple
clients (threads) which will send multiple files to process to the
webserver.
I am trying to get the max kb/sec load on the server. For example like after
running the test, I would be able to say that the max load on the server was
like 25kb/sec or something.
Also, I want to be able to get the response from the web server with
processed file.
How would I do this using jmeter, could anybody show me like a sample config
files or anything which would get me closer to my goal, please.
Thank you,
<PERSON>
|
63499d76-b5b8-48cb-c4df-bf52ecc11f6d
|
['29ceb13a-b32d-efcc-133b-516345f6958d']
|
Hello all,
I am new to the Jmeter. I am trying to write a webservice(soap) request when
jmeter sends soap messages saved in the files locally to the webserver.
When I am using Agregate Report Listener I am able to see in the viewer
Throughput info, KB/sec info an well as Error % info.
I am wondering is there any way I can get this info from the saved jtl file,
or redirect it somewhere and save it to some file(s)?
Thank you,
<PERSON>
|
28dbac2d-befc-bdff-2715-c3442e185a1a
|
['29fafc45-17ee-785e-70f8-fda23692dd9b']
|
Hi,
Given a SRPM file and a mock config file, how do I get a list of all missing
buildrequires for this SRPM?
Is it possible using the command line tools, or do I need to use the python
api? I looked at the yum/mock api and it seemed a bit overwhelming.
Thanks in advance.
Regards,
<PERSON>
|
f59a263c-f1eb-d024-3660-ed048c4e3412
|
['29fafc45-17ee-785e-70f8-fda23692dd9b']
|
Hi,
This is my first time using bioperl for restriction analysis, so please bear
with me, if this is a FAQ.
I downloaded withrefm.906 from ftp://ftp.neb.com/pub/rebase/ and created the
script shown at the bottom of the mail.
My bioperl version is bioperl-live nightly from 09-Jun-2009.
The scripts throws an exception - see below. But, if I comment out the
'-enzymes' argument, so it uses the built-in collection of enzymes, it works.
My problem is, that I need to use some of the enzymes that are only available
in rebase. So how do I get this working?
Thanks for your attention.
Best regards,
|
e6e9386b-bf35-7cf9-b858-1d951bc68abd
|
['2a023c83-8f0c-287f-609d-ec758e65089c']
|
The Rare Books and Special Collections Library at the American University
in Cairo is pleased to announce the launch of the Underwood & Underwood
Egypt Stereoviews<http://digitalcollections.aucegypt.edu/cdm/landingpage/collection/p15795coll8>digital
collection.
The collection includes 101 images of Egypt commissioned by the Underwood &
Underwood publishing company in the 1890s. The photographs, originally sold
as a boxed sets, document 19th century Egyptian culture and the history of
travel in the Middle East. The wide geographic scope of its subjects
spanning along the Nile River, the Suez Canal towns and the Egyptian
deserts render a thorough introductory visual representation of Egypt as
opposed to the contemporaneous amateur and subjectively compiled albums of
its time. Of particular interest are the brief descriptions and the six
language translated captions on the back of each card which, content wise,
often contain inaccuracies that may be interpreted as colonial approaches
on the part of the publishing
company.<http://digitalcollections.aucegypt.edu/cdm/search/collection/p15795coll8/searchterm/Transportation/field/subjec/mode/all/conn/and/>
The collection was originally purchased in 1985 by American University in
Cairo President <PERSON>. Two years later, <PERSON> expanded the
collection by purchasing the full set of stereoscope slides. The collection
is available in the Rare Books and Special Collections Digital
Library<http://digitalcollections.aucegypt.edu/cdm/>
.
Regards,
|
a984a0e6-a6e1-2e35-089b-939f48891c00
|
['2a023c83-8f0c-287f-609d-ec758e65089c']
|
Dear Colleagues,
The American University in Cairo is pleased to announce the first
installment of the AUC Board of Trustees Meetings
Minutes<http://digitalcollections.aucegypt.edu/cdm/landingpage/collection/p15795coll3>
digital
collection, available in the Rare Books and Special Collections Digital
Library <http://digitalcollections.aucegypt.edu/cdm/>.
The American University in Cairo Board of Trustees Meetings Minutes digital
collection primarily includes meeting agendas and minutes, as well as
additional documentation such as budgets, correspondence, reports, and
memoranda. The collection includes minutes ranging from the first meeting
of the Board of Trustees of Cairo Christian University on November 30, 1914
to the American University at Cairo's meeting on December 19, 1959.
This collection will continue to grow as minutes are digitized.
Best regards,
|
1b9e7316-74a4-13f2-56f8-d12d6abdcbf3
|
['2a04e5c8-1a56-9cd8-2e62-f4fadd1d5eaf']
|
I have a Linksys NSLU2 setup and I have mapped a drive on my slimserver box
to the NSLU2. When I try to change my music folder to the mapped drive I
get the error,
"New value for Music Folder rejected:
Oops - "Z:\" doesn't seem to be a valid directory. Try again."
I have tried to also map directly to the NSLU2 using \\nslu2\Music and get
the same error. Does Slimserver not support mapped drives?
Any help is appreciated.
<PERSON>
|
448f3e62-d25d-8b8b-e4b8-e4a20f69cde4
|
['2a04e5c8-1a56-9cd8-2e62-f4fadd1d5eaf']
|
I have been experimenting with lossless files on the linkstation. So
far I have only done wav as I have been a bit gun shy about compiling
native flac and shorten binaries. The results have been good so far
though. I have been running top on the linkstation while playing wav
files from the squeezebox. Slimserver has been showing a max of 13%
cpu usage under these conditions, very promising results I think.
Based on my benchmarking of slimserver and flac on my PII 450 redhat
box, flac should use 1 to 2% of the cpu by itself and around 500k of
ram, for a total of 14 to 15% of total CPU, very promising indeed.
The only potential problem is scan time. When scanning and playing wav
files at the same time, cpu useage can jump to around 50%, still
respectable considering what the linkstation was designed for.
Jamy
|
8c9c6ccc-9277-aed8-ef3b-3dda7b1d6171
|
['2a0ae01c-ce35-30a2-d14a-b8bc861f0b4d']
|
http://wiki.openstreetmap.org/wiki/OSMF_Members_Request_for_General_Meeting
It seems to me like this motion, if passed, would cause 3 members of the
board to have to resign (<PERSON>, <PERSON> and <PERSON>), and mean that those
people plus <PERSON> and <PERSON> could not stand again for at
least two years.
(Based on http://wiki.openstreetmap.org/wiki/Foundation )
Is that about the size of it?
Is it a good thing?
<PERSON>
|
3d89508f-6868-70ad-2202-01fb38f79be7
|
['2a0ae01c-ce35-30a2-d14a-b8bc861f0b4d']
|
I had cause to go to Leicester A&E on Saturday. It was renewed in April
(Google Earth suggests there was a big building project), and the map
has not been updated, and so it's not clear on OSM where the drop-off
is, or which is the associated multi-storey. The road I think it is, is
part not-marked-as-such and part non-existent. There's also a separate
Children's A&E entrance. Given the nature of these facilities, and the
terrible Leicester 1-way system, it would be very good to have the map
be extremely clear on these points!
Can someone local look into the issue, please?
Thanks :-)
<PERSON>
|
14210969-dc34-7729-a582-d681268a97e8
|
['2a303ded-f5e0-fa50-ba7c-66d22fe61eb7']
|
Hello,
On the web I see vague references to Intel having ported netfront and
blockfront to HVM Windows guests, using a fake PCI device to expose
event channels and grant tables to Windows kernel drivers. Is that PCI
device, the ported netfront/blockfront, or both in the open source
release? If so, where?
Thanks,
<PERSON>
|
25405fcf-f2be-66b2-12bd-4138b38fe0c6
|
['2a303ded-f5e0-fa50-ba7c-66d22fe61eb7']
|
Hello,
It seems that the kernel source yielded by an apt-get source
linux-image.2.6.24-xen is not in fact a Xen kernel? Make oldconfig using
the config which ships with that image complain of missing symbols
XEN_BACKEND, XEN_PCI_FRONTEND and so on.
Is the source for that package actually available? If so, why does
apt-get not deliver it?
I ask because the current Xorg VESA driver exposes a nasty bug (hangs
during mprotect on a mapped PCI memory range) which I would like to
attempt to debug, but which I cannot do without the sources available!
<PERSON>
|
fab0c67c-b5ed-a1ae-7fdf-d47938ff04e2
|
['2a41fe86-1ce0-7a32-4420-6ae45310e774']
|
Short: Please consider submitting to CICM 2017 by mid March.
http://www.cicm-conference.org/2017/cicm.php?event=&menu=dates
Details:
Call for Papers
10th Conference on Intelligent Computer Mathematics
- CICM 2017 -
July 17-21, 2017
University of Edinburgh, Scotland
http://www.cicm-conference.org/2017
|
a8e9b2a9-be06-805d-d3e3-674435620331
|
['2a41fe86-1ce0-7a32-4420-6ae45310e774']
|
I just noticed that one [1] of the agda wiki pages has been receiving wiki
spam for the last month.
I reverted it, but I guess it means other pages may be similar and that
some protection is needed (for example by changing the password).
[1]
http://wiki.portal.chalmers.se/agda/pmwiki.php?n=Main.QuickGuideToEditingTypeCheckingAndCompilingAgdaCode
It would be great if somebody could go through the other pages as well.
/Patrik
|
24edd772-2f1d-5a71-995d-65a066788077
|
['2a4ba969-490e-9a00-b60a-ebb60ffb90f2']
|
Hi Folks,
I¹m experiencing the following error on windows XP SP2. The error is
described at:
http://mail.zope.org/pipermail/zope-checkins/2005-June/029495.html
I¹ve installed:
Zope 2.8.3-final for windows from the zope.org site
Plone-2.1.1, just the products from the plone.org site
Python 2.3.5 for windows from the python.org site
Before installing Plone, and having just installed Zope and Python, I can
start Zope without any error. Of course, this is without any Products in my
instance directory. Then, when I stop Zope, then copy the Plone products
over, then try to restart Zope from my $INSTANCE_HOME/bin/runzope.bat
program, I get that PySECURITY_ATTRIBUTES error. I went to the Zope folder
in my Program Files directory and then went to
lib/python/Signals/WinSignalHandler.py, and I notice that the patch applied
to fix this bug appears to have been applied to that file, however, I¹m
still getting the error.
Does anybody have any clue why?
Thanks so much.
Cheers,
<PERSON>
|
b8080d7e-cb02-ddf9-8a7d-1c652025684a
|
['2a4ba969-490e-9a00-b60a-ebb60ffb90f2']
|
Hi Folks,
I was just wondering: has anyone given any thought to porting Nutch to
Maven (http://maven.apache.org <http://maven.apache.org/> )? I think that it
would simplify the external library dependencies a whole lotta bunch, just
for starters. Maven also has a lot of other goodies (such as site
generation, checkstyle/jdepend reports, etc.) and uses the idea that you
should describe your project once (using metadata in a "Project Object
Model", or POM file), and then a lot of typical system building and
maintenance tasks should be based on that model. There is debate between Ant
users and Maven users as to which one is better, but from my experience at
JPL, upgrading our projects to Maven (from Ant) has saved a lot of time,
energy, and been downright, dare I say, fun :-)
Just a thought.
Cheers,
Chris
|
6393ddc8-d234-87c2-3e23-b8d5b8627818
|
['2a53928e-2489-a7c4-3c82-1da5b95e7a2a']
|
Hey guys!
I am a polyglotter who programs in both Java and Ruby. I have an itch that
I needed to scratch where I need to have the advanced features such as
picture handing in Excel documents that POI offers in a native rails app.
There is nothing out there in Ruby-land and your your compilation option
doesn't work at all for me (plus from the documentation on the site the
graphics extensions have other dependency issues). I didn't want to convert
my app to Jruby for one gem so I decided to create a gem using RJB to bridge
over to POI running in a JVM.
This is definitely a work in progress and something that I am primarily
using to create excel spreadsheets with at this point. With that being said
if there is a need for other functionality to be bridged it wouldn't be that
difficult to add functionality to this gem. This also might be a good
starting point for adding functionality for those using Jruby to condense
down the syntax for creating styles etc..
As of this writing I have the project up on github here
https://github.com/lgleasain/poi_pond. Once I get the functionality that I
need to scratch my own itch I plan on publishing that as a first gem and
then reving as I add functionality or fix bugs etc.. Others are welcome to
fork the project, add code etc..
What would be the best way for me to compliment your efforts with my gem?
<PERSON>
|
09e8b7c1-8d0e-a74a-b5ce-beb93f75b21b
|
['2a53928e-2489-a7c4-3c82-1da5b95e7a2a']
|
Hey guys!
I am a polyglotter who programs in both Java and Ruby. I have an itch that
I needed to scratch where I need to have the advanced features such as
picture handing in Excel documents that POI offers in a native rails app.
There is nothing out there in Ruby-land and your your compilation option
doesn't work at all for me (plus from the documentation on the site the
graphics extensions have other dependency issues). I didn't want to convert
my app to Jruby for one gem so I decided to create a gem using RJB to bridge
over to POI running in a JVM.
This is definitely a work in progress and something that I am primarily
using to create excel spreadsheets with at this point. With that being said
if there is a need for other functionality to be bridged it wouldn't be that
difficult to add functionality to this gem. This also might be a good
starting point for adding functionality for those using Jruby to condense
down the syntax for creating styles etc..
As of this writing I have the project up on github here
https://github.com/lgleasain/poi_pond. Once I get the functionality that I
need to scratch my own itch I plan on publishing that as a first gem and
then reving as I add functionality or fix bugs etc.. Others are welcome to
fork the project, add code etc..
What would be the best way for me to compliment your efforts with my gem?
<PERSON>
|
fcc06a47-8b89-344a-fd7d-97578d231934
|
['2a5b356f-16b3-a26c-e955-6ab73f1dc462']
|
Hi,
I am a newbie to Typo, and have a one-year experience with Ruby and
Rails. I have a quick question:
Would it be very hard for me to set up a blog that has posts that are
actually an aggregation of RSS feeds?
My idea is to set up blogs for me and a couple of friends, but have
one "master blog" that would aggregate posts from all our blogs and
show them ordered by date and with links pointing to the actual
individual blogs, archives aggregating individual blog's archives, and
the like.
I hope I could make myself clear.
I am thinking that the best way to do that would be to install one
typo instance for each one of us, and one more for the master blog
thing, in which I'd have to install a plug-in written by myself that
accomplished said tasks.
Is this the right way to go about doing this? And should this be too
hard to do, being that I am not the best Rails developer around? :)
Thanks for any feedback you can give me.
Cheers,
<PERSON>.
|
0401b6e0-ce08-9c71-c0ef-59f267aa7762
|
['2a5b356f-16b3-a26c-e955-6ab73f1dc462']
|
Hi,
I had a need for curved lines in my application, so I did a small
class that plots a Quadratic Bezier Line from one point to another,
with some options like passing it your own control point or letting it
calculate it, and setting the number of steps it passes from the first
point to the last.
Being sort of a newbie to OO JavaScript, I would REALLY appreciate if
you could give me any feedback on correctness, style and anything else
you feel like.
The code is here: http://plano-b.net/quadraticBezierLine.js
Please fell free to use it and, if possible, give me any feedback on
what you like and dislike about it.
Thank you,
<PERSON>.
|
48ac17a4-b5bf-2c7f-4e45-0ac8187ad4c7
|
['2a5e4eac-2584-21a5-9641-8155296fe022']
|
Hi, All,
I deployed NiFi 1.3.0 in our test environment, but it failed to bind to
its port 8079
I've checked out source code and want to add some logs for debug. I'm new
to NiFi.
I've several questions:
1. I added some logs in FlowResource.java, how do I know which nar file
contains the FlowResource.class?
2. How to generate a specific nar file with mvn without building all other
nar files?
Thansk
Boying
|
ca5d3b6d-94f8-2a93-0ded-d8bcb38bb9ca
|
['2a5e4eac-2584-21a5-9641-8155296fe022']
|
Hi, team,
We set up several NiFi dataflows for data processing.
These dataflows are configured to run once per day in the midnight.
But sometimes, some dataflows are failed,I want to run the dataflow again
immediately after fixing the issue instead of waiting for running it in
the midnight to
make sure that the issue is really fixed.
The only way I know to do this is to change the time of running the
dataflow to the 5 mintutes from now for example
and then change it back to midnight.
It's a little inconvenient.
Is there any REST API that I can use to trigger the dataflow on demand
i.e. without change the time back and forth?
Thanks
Boying
|
5318d2b7-3d1c-9455-3666-a066c1ee5002
|
['2a6296b7-65b5-d440-a3fa-7044f041b8a4']
|
Due to the fact that the hardware related posts, that don't really
have much to do with linux are so popular, we created a new list just
for hardware related discussion.
I personally don't mind having the discussion about hardware, as this
group has some of the most experienced computer people in general,
However I think we should keep the <EMAIL_ADDRESS> list dedicated to
things that actually involve linux.
Here are the details:
<EMAIL_ADDRESS>
This is a mailing list for hardware specific issues, discussion, etc.
The idea is to move the generic hardware discussions that have been
happening on the main list that do not necessarily have a lot to do
with Linux to a more specific list. To subscribe go to:
http://lists.gtalug.org/mailman/listinfo/hw
Does this work for everyone?
-Joseph-
|
48687a75-69d8-6669-b2b8-d200c4eaab83
|
['2a6296b7-65b5-d440-a3fa-7044f041b8a4']
|
Does the TLUG provide install fests ? (a time and place where you
bring a cpu and leave with a cpu + linux)
When I was part of NCSU lug in Raleigh, NC, USA we could pretty well
double our meeting turnout by pasting up hand bills with simple things
like "Do want to know more about linux" and the meeting time / place.
It is amazing how many people have heard rumors about "this free
Windows replacement" but don't know where to start looking.
<PERSON>
|
58cd08fc-52ea-80f4-2f6b-7215a55d9b0f
|
['2a64a934-5274-d234-0913-d9d2d5a71f02']
|
Dear WG members,
According to the presentation in the NMRG session, the ANIMA model
relies in a registry which seems to be centralized. I think it does not
suit autonomicity as well as a distributed registry would, so different
definition and implementation strategies can appear in the future. In
order to be a widely accepted model, which I think would be really
useful, ANImA should support different kinds of registries. Please let
me know if you have plans to consider it. Thank you.
Regards,
<PERSON>
|
e1ae645f-b9ab-3eab-bbea-87729b552388
|
['2a64a934-5274-d234-0913-d9d2d5a71f02']
|
Dear all,
In support for the adoption of draft-song-opsawg-ntf, being a co-author,
I must remark that as telemetry is gaining momentum in the network and
its management, many solutions arise and together they bring their own
models and protocols for managing the information life-cycle.
Therefore, from my point of view, and I think I do not fail if I include
many others, it is essential to structure both a telemetry framework
that comprises all protocols used today together with a well rounded
architecture that puts them in common, the necessary interfaces to
interconnect architectural elements, and adapters for the protocols that
require them.
In that regard, there are already a multitude of protocols being used to
gather and transport telemetry data so now is the moment to support and
evolve the draft in question, trying to influence those other elements
involved in telemetry and management in order to ensure that integration
has the higher possible level of flexibility and reduced effort.
The framework and its reference architecture are specially important to
allow seamless integration of several elements related to telemetry that
are being worked separately, as otherwise ulterior integration, if
possible, would require a big effort. In this sense, it is specially
relevant to the IETF, which matches this scenario perfectly and thus
will benefit the most from the proposed telemetry framework.
Regards,
<PERSON>
|
e1ff9f15-2e82-0fd5-4cf0-4bd759a23acd
|
['2a79e047-d532-ba9c-3bef-26abac19fe23']
|
I wanted to share some results from trying out Aramorph Arabic Analyzer with
Lucene. I experimented with a set of 100 web documents in Windows-1256
encoding. The indexing took just over 200 seconds, although I had to
increase the heap-size to 500Meg, or I would get OutOfMemory Exceptions
halfway thru the documents. The 200 seconds includes time to make the url
connection and tidy the documents to extract the text out.
Has anyone done similar experiments with a larger set of Arabic documents?
I'm interested in hearing from anyone else who has used Aramorph with Lucene.
Thanks,
<PERSON>
|
eef3e43b-b86b-dd5e-d234-1077e4d4bf18
|
['2a79e047-d532-ba9c-3bef-26abac19fe23']
|
Actually, one thing worth mentioning about the search, is when searching for
whole phrases, if there is any ambiguous words in the phrase, then the Search
fails to find the document, even if the phrase was copied and pasted from the
original document.
So for example, I have a document containing this phrase: الأجهـــزة الرياسية
للمنظمة
The first two words only have one stem, but the last word has two stems:
munaZ~im AND munaZ~am,
So the entire search query becomes: "Al>jh___zp riyAsiy~ munaZ~im munaZ~am"
Which fails to find any matching documents.
Whereas, a search for "Al>jh___zp riyAsiy~" would succeed.
Even placing the accent over the ZAH (ظ), will not disambiguate the search.
Has anyone found a workaround for this?
ali
|
8a9f49f7-43f7-2ba5-9b15-bbfa778c2b5d
|
['2a79ebb6-4913-973e-1568-b2cc50eb89e3']
|
Hey <PERSON>,
I wrote a while back with the same symptoms. I was using 1.2.7 at the time. I too have since upgraded to 1.2.9 and I'm receiving the same errors.
I've attempted to follow similar steps with no resolution. As an added bonus, the first time a user successfully authenticates to the web page, it is littered with grabage throughout. It randomly deposits at the top, bottom and throughout the body of the page disrupting the html, text and some javascript.
A refresh seems to clear the garbage up and the page will display normal afterwards. I've tried this on 2 different web applications and they exhibited the same symptoms.
Below is the information that pastes throughout the page. It changes on occassion when a different domain name is used to visit the page.
1ff8
|
f1fcea5c-64da-4fdc-10dd-1411dd0bb824
|
['2a79ebb6-4913-973e-1568-b2cc50eb89e3']
|
Hey <PERSON>,
I wrote a while back with the same symptoms. I was using 1.2.7 at the time. I too have since upgraded to 1.2.9 and I'm receiving the same errors.
I've attempted to follow similar steps with no resolution. As an added bonus, the first time a user successfully authenticates to the web page, it is littered with grabage throughout. It randomly deposits at the top, bottom and throughout the body of the page disrupting the html, text and some javascript.
A refresh seems to clear the grabage up and the page will display normal afterwards. I've tried this on 2 different web applications and they exhibited the same symptoms.
Below is the information that pastes throughout the page. It changes on occassion when a different domain name is used to visit the page.
1ff8
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.