query_id
stringlengths 4
64
| query_authorID
stringlengths 6
40
| query_text
stringlengths 66
72.1k
| candidate_id
stringlengths 5
64
| candidate_authorID
stringlengths 6
40
| candidate_text
stringlengths 9
101k
|
|---|---|---|---|---|---|
7787e522-2899-b4ae-2f9c-6ddbd059d925
|
['0ed95809-e8f5-36d4-4910-936ea1f9bf18']
|
Hi,
I made a client-server application in android. The client and the server
are 2 different apps and they exchange messages using zeromq. The messaging
pattern used was req-reply. 1000 messages were sent and received by the
client n server. The avg time for each round trip was around 3.92
milliseconds with no UI updates.Only the time was logged into logcat.
It was compared to a client server application running under node.js which
took approximately 2.75 milliseconds for each round trip.
Shouldn zeromq take lesser time? is it related to the android? Has anyone
observed something similar?
Thanks,
<PERSON>
|
16e49fe2-f770-f9bf-1778-b7702b81156b
|
['0ed95809-e8f5-36d4-4910-936ea1f9bf18']
|
Hi,
I wanted to build and use filemq(implemented in java for jeromq) . I went
through the readme in github , but i am still not sure how exactly i need
to build and use it.
Could you please redirect me to some link or give me some more information
that would help me get started .
Thanks,
<PERSON>
|
3bb37382-e586-74c9-ecb5-3184e0d20aec
|
['0edae09c-5d03-d69f-9e24-4132cdb1b93a']
|
Hi,
I have installed tomcat 5.5 with the windows binary
installer. Prior to commencing the installation, I
installed J2SE RE 1.5 and pointed by JAVA_HOME to the
installation location. When I installed tomcat, it
went through fine and the server started as a service.
No issues with this.
Next, I uninstalled the tomcat installation described
above. Then I downloaded the zip variant of the same
tomcat 5.5 version. Unzipped it and executed the
startup script. But it reports a "Windows cannot find
'-Djava.util.logging.manager=org.apache.juli.ClassLoaderManager'.
Make sure you typed the name correctly, and then try
again. To search for a file….".
Went though the release notes and RUNNING.txt. Both
indicate the setup procedure for the binary
installation only on windows. In fact the setup procedure (as at
http://tomcat.apache.org/tomcat-5.5-doc/setup.html)
for unix explicitly indicates 'Before running the
script, the JAVA_HOME environment variable should be
set to the base path of the JDK.'. Does this mean that
the JDK is not required only for the windows binary
installation? I think it may not be so. And that I may
be doing something silly. Any pointer on how to get tomcat running
with only the JRE using the zipped varient will
greatly help.
Thanks,
<PERSON>
|
1331ec96-9b41-a7a1-8c5d-2e84280543c1
|
['0edae09c-5d03-d69f-9e24-4132cdb1b93a']
|
Hi,
I am reading <PERSON>'s book on struts.
There are several references to the scaffold classes in the book. I googled
for it. I find that the generic scaffold page indicates that the struts
scaffold is shipped with struts code.
I browsed struts code and find that there is no scaffold package. For e.g.
the book indicates that there is a package named
org.apache.struts.scaffold.ProcessAction. But there is no scaffold directory
in org/apache/struts source directory.
If somebody could help me find the scaffold classes, it would really help me
a lot. TIA.
Regards,
Babu
|
a6dbf95a-f6f6-0340-077d-84835494f9c9
|
['0ef4728d-5ec6-a964-eb06-ec5111416967']
|
On being social? Should Trustees, member and the wider community be social?
I was very social with <PERSON> and everybody else at the AGM in
Bristol in April (in the bar after the meeting). Many people have
problems with being social (lack of money, social skills, phobias, being
"cold shouldered", being forced to stay "on topic", age, being able to
remember people's names, being able to recognise faces, people not using
real names but odd Wikimedia aliases, etc etc).
I have been very supportive of both the London Wikimeet, although I
would prefer an evening meeting rather than a lunchtime meeting (and
hence my own attendance is poor). I have worked with others to promote
"London Wiki Wednesdays", which has now died a death.
A charity and indeed any group must meet diverse needs. It is has been
raised before that the Muslim community would be less likely to join a
meeting in a pub.
<PERSON>
|
1d365f5c-74a5-63b4-304c-ec45876ca8f2
|
['0ef4728d-5ec6-a964-eb06-ec5111416967']
|
It is my understanding that the Chair is one of many on a board of
Trustees. So, for example, Trustees expenses will be recorded with the
Charity Commission annually.
The current issue is Fae. The last time I started to rant, it was about
<PERSON>, and Monmouthpedia. In the latter case, he stood down as
Chair for discussions about Monmouthpedia. For me, that does not cut the
mustard. As a Trustee, there are very strict rules about gaining
financially from projects which are run under the umbrella of a charity.
I am informed no rules have been broken.
Wikimedia UK is a very young charity. Soon, let us all hope, it will
become a teenager.
<PERSON>
|
f9ea37ad-34a6-8108-5c9e-5a5f15da5550
|
['0ef9f772-dfa0-a8de-8079-df8aff7e9086']
|
Hi,
Perhaps you have seen my last question with the intermediate format.
My problem is, that can't use multiplexed VOB as a source for another
encoder which I have to use.
Does FFMPEG support demultiplexing VOB to another container like AVI or MOV?
This would be the perfect solution of my problem because when demultiplexing
the video and audio isn't touched but transformed into another container,
right?
This resulting demuxed container should work as a source for the final
encoder I have to use.
Thanks,
<PERSON>
|
71cdb495-d0fe-6ead-d7ec-288c87e9fbd2
|
['0ef9f772-dfa0-a8de-8079-df8aff7e9086']
|
Hi,
I have got a problem with BitmapData.loadBitmap used in an external loaded
swf.
When I run my external SWF all works as expected but when I load the SWF
from my main movie the BitmapData fails to load.
The bitmapdata is exported with a linkageId in my external SWF.
It seems like my main movie has no access to the library of my external swf.
When I try to attach the bitmap as a movieclip-symbol it also works though
it can't be a library problem?
Any ideas?
Thanks,
<PERSON>
|
bdf842cc-96e9-32a3-3387-db05e3db91e0
|
['0efac0bf-dc33-ee49-0738-5428380eb82e']
|
I read the following:
Although the standard release of JSR-286 better supported common web
development frameworks like JSF, Spring, Struts and WebWork, it is not
supported by Wicket 1.4. After co-operative talks with <PERSON> and
<PERSON>, Componence decided to contribute the JSR-286 bridge to the Wicket
community.
and
After 2 months of work <PERSON> has submitted the final patch for
WICKET-1620 . The patch is now awaiting <PERSON> review. With this patch
Wicket will also support the new features of the Portal 2.0 specification
like events, shared render parameters and resource serving.
so what I am asking is did this make it into 1.5M, specially the events to
send between portlets
Thanks Much for response
|
9dfe3173-3315-8237-eae0-391ead9f5392
|
['0efac0bf-dc33-ee49-0738-5428380eb82e']
|
By default portlets can send and receive events with other portlets that are
on the same page.
This can be changed to enable portlets to send and receive events from other
portlets that are on different pages and is done by adding the following
property in portal-ext.properties in Web Space server and Liferay Portal
5.2.x.
portlet.event.distribution=ALL_PORTLETS
Does anybody know or can point me to documentation that shows how to do this
for jetspeed 2.
Thanks in advance
|
9076cf83-9359-090b-4599-11812a8c6628
|
['0f0d9f25-f0f5-0ac3-4716-6b3acf450db4']
|
Hi all,
I notice that org-open-at-point reports "no link found" when the point
is on the tags in a headline, even though the mouse pointer indicates
that emacs regards org tags as a link. I believe this is a bug, which
the attached patch addresses.
Please let me know if I can provide any more information.
Best,
Galen
|
ee2be3e7-4b9b-ae5d-568c-f72cba34d3e5
|
['0f0d9f25-f0f5-0ac3-4716-6b3acf450db4']
|
Hi all,
I use [Semantic
linefeeds](http://rhodesmill.org/brandon/2012/one-sentence-per-line/)
for a lot of my org files, for which having a visual indicator of column
80 is useful. I'm currently using
[`fill-column-indicator`](https://github.com/alpaker/Fill-Column-Indicator)
for this, but the column indicator does not adjust for the indention
level when using `org-indent-mode` — it just draws straight down on
column 80 of the frame, regardless of the line's indention level. (So in
a line under a level-3 headline with `org-indent-indentation-per-level`
set to 2, the fill column indicator will appear on column 80 of the
frame, which is actually column 76 of the line.)
Is anyone aware of a solution to displaying the fill column in a way
that takes the indention level into account?
Thanks!
Best,
Galen
|
0a6b73d2-b2a8-13d0-b21e-0113da99b4a7
|
['0f230e5a-3503-af19-4371-68a8411f7772']
|
Hi,
Could someone explain what and how jsvc's "-check" parameter is *supposed"
to work, please?
There's only the briefest of documentation for the "-check" parameter. My
reading of the source code in jsvc and commons-daemon makes me think that
the "-check" parameter simply tests whether the class to be loaded as a
daemon by jsvc *will* load correctly - I was actually looking for a
replacement for the "--test" parameter of start-stop-daemon.
Thanks for any assistance,
<PERSON>.
|
1e0ac123-4e6b-55a9-3cf3-64b145393ed0
|
['0f230e5a-3503-af19-4371-68a8411f7772']
|
Placing log4j settings in the log4j.properties (or log4j.xml) file
under WEB-INFO/classes effectively requires the developer to configure
logging - e.g. unexploded war files. Shouldn't it be the job of the
system admin who deploys the application to configure things like log
file location? Or have I missed something?
I would like to give the system admin the ability to set the location
of the log4j log file in my applications (as with access log info when
a sys admin can use org.apache.catalina.valves.AccessLogValve in
Tomcat's server.xml). The server.xml (or context.xml) seems like the
right place to set the location of the log4j log file - maybe as a
JNDI string resource.
Can anyone suggest a way of giving system administrators the means of
setting log4j configuration settings? Or, can anyone explain why this
would be a bad idea?
Thanks,
<PERSON>.
|
67699691-dfa4-9dfe-19b3-7790e685d49b
|
['0f2cc921-339a-4d26-6c16-b1e5a5a31f5e']
|
Hi <PERSON>,
I started working with an IXDP465 board a few days ago and I was
anxious to get kernel-2.6.17-uc1 and Intel's Library v2.3 running. I
created a patch for the BSD_ixp400AccessLibrary-2_3.zip package so that
it cleanly compiles and run for this platform. So far I've only tested
Ethernet using the mezzanine card with LXT971 PHY.
I tried to make it compile *really* cleanly and avoided big changes
to the code... but I've done a few changes that are not optimal (e.g. I
hard-coded the expansion bus size to SZ_32M for the IXP465 architecture
and left as SZ_16MB to the others).
Would you be interested in this patch? I read a few weeks ago that
you were going to start patching this library but I didn't have any news
since then.
Also I attached a (very simple) patch for linux-2.6.17-uc1 that
prevents "pci_set_dma_mask" and "pci_set_consistent_dma_mask" (in
drivers/pci/pci.c) from being exported if the architecture has
HAVE_ARCH_PCI_SET_DMA_MASK macro set. These symbols were being exported
twice for the ixp4xx. Please correct me if this is wrong.
TIA,
Thierry
|
a323c0de-e55b-e3b0-54f7-f0d296f03930
|
['0f2cc921-339a-4d26-6c16-b1e5a5a31f5e']
|
Hi,
I intend to compile the kernel 2.6 that comes with snapgear 3.3.0
for Intel Montejade board. Could you please tell me what binutils/gcc
version should I use?
Should I try the latest toolchain available on the site,
arm-linux-tools20051123.tar.gz?
What about the toolchain from GNUARM (gcc 4.1 and newlib), is it "safe"?
TIA,
|
56b15709-7349-b783-95b0-0d20148b5cc2
|
['0f3072a4-8e69-438b-ed56-bce7cbc493dd']
|
We are using SAP but we are looking into making a change if needed. SAP has
limitations and is not very user friendly from a PMO perspective... I am
looking into using a Scrum Tool which works well with rolling up project
info into the PMO tool like Primivera or PlanView.. Resource Time and
project beginning and end dates are vital so that actual and budget dollars
can be rolled up to the project and program level within the PMO tool. Also
do you know of any Scrum Tool which allows you to track resources by budget
and actual dollars? The problem with these Scrum Tools they do not have
project resource and budget usability so they need to be integrated with a
PMO tool.. They also do not account for resource pooling and leveling by
the sprint and project level. To effectively do resource leveling and
pooling you need to account for resource time by the sprint and project
level.. Have you encountered these same problems ?
Thanks
<PERSON>, PMP
|
e51210ce-df6f-f34c-c185-e302d76e2949
|
['0f3072a4-8e69-438b-ed56-bce7cbc493dd']
|
Fellow Scrum Yahoo Group,
If anyone is interested I have just found out about this open
posiiton avaliable where I work at The Coca Cola Company in Atlanta
Georgia. It ia great opportunity to work for a great company who has
just started implementing Scrum and Agile. If you are interested
please reply back and I will forward to the hiring manager your
resume if you are interested..
Regards
<PERSON>
|
041c0990-750b-6139-f93e-b4714ef5b91a
|
['0f3e5ade-97a3-1766-9262-ce23c3beddfc']
|
I have traveled to Alaska and Anchorage by RV three times. Last year we were pleasantly surprised to find we could actually overnight in a parking lot for a night or two. The 'campgrounds' in the city are woefully discouraging...
No one should expect to spend days/weeks on end in someone's parking lot, but there must be some logical compromise. I hope they sort it out.
MaryS
|
2353e5fc-8fe9-b3c1-81e7-d69fb5059b93
|
['0f3e5ade-97a3-1766-9262-ce23c3beddfc']
|
Downtown? Then it is not the same place. These people were adamant that it was AUNT something and that there was a lot of signage as one approached Paducah. Well, we saw no signage for AUNT anything as we approached Paducah, so I can only assume they were confused travelers. If we ever do figure it out, I will report to the group. In the meantime, we are snugly ensconced at a friendly Wal-Mart.
<PERSON>
|
14cfdd50-7167-22c6-c4c6-f63e2f064416
|
['0f42e149-bb64-f61b-fb4a-5573ea467c0f']
|
Hello,
I hope this is the right list for my question.
Support of the TCPMSS target for IPv6 was recently added in the kernel
and ip6tables. It can help fixing some MTU blackhole issues, so thanks.
However there is currently no support of the tcpmss match for IPv6 yet,
although xt_tcpmss.c in the kernel seems to be IPv6 compatible.
Has anyone already submitted a patch to add support for an IPv6 tcpmss
match in ip6tables ? It seems trivial to derive from the existing IPv4
tcpmss match for iptables. I believe I could even do it although I am
not a software developper and don't know how to submit a patch.
I ask because I would have a use for an IPv6 tcpmss match in conjunction
with the IPv6 TCPMSS target. "-j TCPMSS --clamp-mss-to-pmtu" may not be
optimal, still allowing underlying fragmentation at a lower layer
because of encapsulation (e.g. my ISP uses IPv6 over PPP over L2TP over
UDP over IP over ethernet, where the optimal non-fragmenting IPv6 MTU is
1460 due to the PPP+L2TP+UDP+IP overhead). Lowering the MTU is not an
option, as I want to keep the ability to send and receive as big packets
as the link allows. "-j TCPMSS --set-mss 1400" could be used to prevent
TCP connections from causing fragmentation of the L2TP packets, but I
must check that the original MSS is above 1400 before changing it. Else
it would increase the MSS, which is not desirable. So I would need the
tcpmss match in order to check the original MSS. Another solution would
be a new "--clamp-mss <value>" option in the TCPMSS target which would
clamp (i.e. decreases if higher) the MSS down to an arbitrary value
instead of a value based on the PMTU. But I feel it would be more
complicated.
Thanks for your attention.
|
91037943-2119-2ad4-9385-f6bd44183efc
|
['0f42e149-bb64-f61b-fb4a-5573ea467c0f']
|
Hello all,
What are the possible conditions for a UDP packet to have the INVALID
state but still be accepted by the destination ?
I already found a previous reply from <PERSON> mentionning the
following conditions :
- the header is too small, truncated or malformed, etc.) ;
- the IP addresses or the protocol parameters (ports) for a unique
tuple (src ip, dst ip, proto, src "port", dst "port") cannot be
extracted from the packet.
But wouldn't that also make the destination discard the packet ?
Are there other conditions ?
Maybe if the conntrack table is full ?
Thanks for all insights.
|
08a52732-25ad-6fed-69d7-be750db69297
|
['0f51a73b-a2d1-fe88-834b-977367745f3f']
|
I'm using heka in kubernetes and I'd like to use a configmap in different
projects so they can create some local heka configurations.
A configmap is mounted in a directory, just like a regular mount. And I have a
docker base image with some files and when running in kubernetes in a specific
project, I want to mount project-specific heka files with a configmap. But this
needs to be on a different directory (if not, the files in the base docker image
will not be visible). So, basically, there is no easy way to solve this.
There is a "postStart" hook in kubernetes that I can use to copy the config file
mounted somewhere else, to the heka config dir. But the problem with this is
that it is not guaranteed (docker does not support it) that it will be run
before starting heka. So, I can't really even do this hack.
Can you please consider adding some other dir to read config files or read
recursively in a directory? (so, I can do something like: hekad -c /etc/heka/
and I have /etc/heka/<config_dir_1> and /etc/heka/config_dir_2)
Thanks a lot!
<PERSON>
|
06ddfb09-bc48-cabd-0f00-bba2a6bf9b18
|
['0f51a73b-a2d1-fe88-834b-977367745f3f']
|
Hi!
I've written a small simple tool to make a file sparse without using extra disk
space, it just digs holes on the file when possible. To dig the hole uses the
Linux-specific fallocate(2) syscall with FALLOC_FL_PUNCH_HOLE. So, also, it only
works on some file-systems.
Do you think that util-linux would be a good place for such a simple, linux-only
program ? The case I see it can be useful is to use on VM images file backed (or
I wrote it with this in mind, at least :)).
The code is quite simple, it's written in plain C (C99 actually) and doesn't
have any external dependencies. You can see the gitweb here:
http://sdfg.com.ar/git/?p=drill.git
or just clone it from:
git://sdfg.com.ar/drill.git
Given that there is a fallocate tool that uses the other mode of fallocate(2)
already, all the detection for fallocate is already there. So it should, I
guess, be easy to integrate to the code-base, adding also the #ifndef
fallocate.c has and that compatibility stuff.
Also, as you can see in the commits, I just started it some days ago. So if
you think it should have some other feature, or something else, please let me
know :)
I'm not sure how this work, but I can write a patch against util-linux if you
think it can be added. If you know there is something I should particulary take
into account for that, I will really appreciate if you let me know :)
Thanks a lot,
<PERSON>
|
f7ae74ef-3f2b-4f6f-7ebe-3ffea59c3fcd
|
['0f5d1315-83e5-b51e-d0b8-4013f44e3187']
|
I'm new to mrtg and I'm looking for help on a perl script for an Ascend MAX
6000.
I have gotten e few scripts but they all have been writen for UNIX. I am
running Win2k Proffesional and need help figuring out hot to make them run
in this platform. SO far I have MRTG 2.9.18 and the latest Active Perl
version.
Does anyone has a script to lend that will do: Number of modems per T1,
Modems in use, Modems available, and obtain a list of users logged on.
PLEASE HELP!!!!!
|
67c077dc-adf9-e676-737b-350d3f54340a
|
['0f5d1315-83e5-b51e-d0b8-4013f44e3187']
|
Hi all: Question...
I finally got my perl script to work!!! One which will query the MAX-6000
for user information (UserName, IPAddress, StartTimeStamp, Inspeed,
OutSpeed, etc...).
My question is: now that I have it running (at the command shell) and I'm
able to see the data being pulled, how do I get it to print that data in
HTML format (or to a webpage)?
Does anyboby have any suggestions? please feel free to drop me a line or
two.
Thanks in advance.
|
90ac9d2a-d657-f4b7-2b6b-c4494fdeadfa
|
['0f6b7001-a0e6-7a0c-cd33-bbeba0603f1b']
|
Hi,
I am trying to use Boost<IP_ADDRESS>Filesystem to copy files to and from a mapped
network drive e.g. X:\SomeFolder. When trying to do this
boost<IP_ADDRESS>filesystem does not recognise it as a valid folder. It fails
exists and is_directory. I have also tried using system_complete to see
if this would generate me a valid path, unfortunately not. I am using
WindowsXP and i'm wondering if anyone has run into a similar problem? or
if there is a concrete reason why the mapped drive is not recognised as
a valid folder.
thanks
|
d999b662-b696-91b6-41ba-6092e45ca139
|
['0f6b7001-a0e6-7a0c-cd33-bbeba0603f1b']
|
Hey,
I have been using boost threads on 32bit linux for some time and am very
happy with their performance so far. Recently the project was moved to a
64bit platform and we saw a huge increase in memory usage (from about
2.5gb to 16-17gb). I have done profiling and found that the boost
threads are the source of the huge allocation. Each thread is allocating
about 10x what it was doing on 32bit.
I profiled using valgrind's massif and have confirmed the issue using
only boost threads in a separate test application. I also tried using
std<IP_ADDRESS>threads instead and these do not exhibit the large memory
allocation issue.
I am wondering if anyone else has seen this behaviour and knows what the
problem is?
Thanks
|
c8df3719-c75d-b2cc-b152-4b675b92a343
|
['0f72f41e-e929-a4e3-be3d-2c5a7c4d9374']
|
I changed mod_nss port from 8443 to 443. When accessing the page it
looks that all images and css styles are not loaded. Is there an easy
fix for this? This will also happen on a fresh install using port 8443.
I have Kolab 3.3 installed on a CentOS 6.5 machine.
I also am having issues getting free-busy to work out the box are there
any modifications I am missing.
Thanks,
<PERSON>
|
342a77ef-e18e-3c5c-da2d-22d0c9d48b3c
|
['0f72f41e-e929-a4e3-be3d-2c5a7c4d9374']
|
Hi,
I am having an issue where every week my HTTPD service goes down and
does not come back up. I am getting the following message in the error
log
[notice] seg fault or similar nasty error detected in the parent
process.
I found this link, which looks to be similar to my issue but I do not
have that location for the PHP file
http://florian.schoengassner.at/sunday-apache-crash-en.html
I have also read it could be an issue with the log rotations, which
sounds right because there are only two other lines in the log file
aside from the one above when this issue occurs.
Any help would be greatly appreciated!
<PERSON>
|
49319062-be30-0338-d420-99e1b0328782
|
['0f9864ea-c0d0-9c7b-0cc7-2e4f5839769d']
|
Dear Madam/Sir, I am pleased to announce that the 120th Canton Fair is coming. The Canton Fair is co-hosted biannually by the Ministry of Commerce of People Republic of China and the Guangdong Government, every spring and autumn. In the Spring of 2016, the past119th Canton Fair attracted over 25,000 suppliers to exhibit over 150,000 kinds of quality products with distinctive features, and the annual turnover reached over USD 29 billion.
We invite you to join the 120th Canton fair. The first 500 customers signing up for attendance may enjoy the following offers:1) Directory of superior suppliers of and a latest report for all industries. 2) VIP permit will be granted3) Assistance on China Visa application4) Free one-way airport transfer and special price for hotel accommodation5) Free local mobile sim-card6) 2 free SPA coupons
We sincerely believe that you and your company will fruitfully benefit from it. Please find the contact person details as follows:Contact Person : Ms. <PERSON>: +971-55-7951168
We look forward to your favorable reply.
Best regards,<PERSON><PHONE_NUMBER>
We look forward to your favorable reply.
Best regards,Coco Chen- The China Import and Export Fair- Guangdong Emirates Business Union In U.A.E.We hosted Promotion Conferences of Canton Fair in:1.) Sept. 2014, Carlton Hotel, Dubai, U.A.E.2.) April 2015, Radisson Hotel, Dubai, U.A.E.3.) Aug. 2015, Holiday Inn, Abu Dhabi, U.A.E.
|
0549c99c-a697-c991-ee5b-8b4037a84ddd
|
['0f9864ea-c0d0-9c7b-0cc7-2e4f5839769d']
|
Dear Madam/Sir, I am pleased to announce that the 120th Canton Fair is coming. The Canton Fair is co-hosted biannually by the Ministry of Commerce of People Republic of China and the Guangdong Government, every spring and autumn. In the Spring of 2016, the past119th Canton Fair attracted over 25,000 suppliers to exhibit over 150,000 kinds of quality products with distinctive features, and the annual turnover reached over USD 29 billion.
We invite you to join the 120th Canton fair. The first 500 customers signing up for attendance may enjoy the following offers:1) Directory of superior suppliers of and a latest report for all industries. 2) VIP permit will be granted3) Assistance on China Visa application4) Free one-way airport transfer and special price for hotel accommodation5) Free local mobile sim-card6) 2 free SPA coupons
We sincerely believe that you and your company will fruitfully benefit from it. Please find the contact person details as follows:Contact Person : Ms. Coco ChenEmail:<EMAIL_ADDRESS><PERSON>: +971-55-7951168
We look forward to your favorable reply.
Best regards,<PERSON><PHONE_NUMBER>
We look forward to your favorable reply.
Best regards,Coco Chen- The China Import and Export Fair- Guangdong Emirates Business Union In U.A.E.We hosted Promotion Conferences of Canton Fair in:1.) Sept. 2014, Carlton Hotel, Dubai, U.A.E.2.) April 2015, Radisson Hotel, Dubai, U.A.E.3.) Aug. 2015, Holiday Inn, Abu Dhabi, U.A.E.
|
365814f6-0634-f3f2-1a16-5d53efe924a8
|
['0fa78980-301c-3634-d50f-aa2aab7ef529']
|
(resent: Previous message went under a different thread)
Hello,
I will likely get to work on a gateway between SOAP-based Web Services
and SIP-based services. I would like to explore the possibility of
implementing it using the Twisted framework and I'd appreciate if you
can give me suggestions on:
1. Which SOAP stack to use. I've heard that ZopeLib is the way to go
these days.
2. Which SIP stack to use.
I will eventually fire questions about the overall architecture the
gateway software should have. Any hints here are welcome.
Thank you,
|
5d4a9b1e-9d1c-3238-53cd-a14a027d7a90
|
['0fa78980-301c-3634-d50f-aa2aab7ef529']
|
Hello,
My PJSIP client is reporting a time out (408) and dropping a call
(sending a BYE message) just a few seconds after it has been
successfully established. I'm trying to understand why this is
happening.
The client connects via a proxy server which happens to be front-ending
a pool of real servers. Therefore, upon processing an INVITE from my
client the proxy sends a REFER message telling my client the real
address to be contacted (specified in the Refer-To field). My client
sends the new INVITE, still via the original proxy, which is processed
fine, gets the 200 OK, and everyone is happy, the connection is
established.
In parallel to the above, my client sends NOTIFY messages to the proxy
telling it about the status of the REFER message it received before. It
first sends a NOTIFY Trying message, and upon successful call
establishment with the requested server it sends a NOTIFY OK message to
the proxy ... and it keeps sending them, one after another. These NOTIFY
messages get a "100 Trying" response each from the proxy, which my
reading of RFC 3515 tells me is acceptable (as well as any appropriate
4xx-6xx class response).
Some times it happens that the original proxy decides to process the
original INVITE directly so no REFER message is sent to my client. In
these cases, the connection is established properly and the call is
never dropped. The session goes just fine.
The only thing that puzzles me is why PJSIP keeps repeatedly sending the
NOTIFY OK messages after the call has been successfully established.
Isn't just one enough? Or is it that the "100 Trying" responses are not
expected by PJSIP?
So, any ideas where this 408 timeout might be coming from?
Thank you,
|
684caa0b-0f03-c59f-25b8-3bd53bcec5ea
|
['0fb9dfac-e6af-2d7b-43e5-7a18381ba2f7']
|
<PERSON> for taking the time to respond and to clarify.
I think there is a fundamental flaw in your perspective on this whole thing.
Although this sounds harsh, and I apologize in advance, it comes across to
me that you are failing at selling XP and looking for someone(s) to blame.
I believe your criticisms are valid, even when I can give counter examples
to all of them. But exactly what do you expect from this group. A nicely
packaged sales pitch, custom tailored to your executives. I'll do that for
you if you hire me, 'cause that is business oriented document and takes time
and resources to create. You can be assured that many companies and
consultants that participate here have an elevator pitch. But, this is not
a business, it is a newsgroup. The XP Community is just that, a community.
Now, this *is* a forum that can get things done and advance thoughts. It is
a great place to develop a public elevator pitch. But, your message does
not come across to me as though that is your primary motive. If it is, I
apologize again. But in that case, let's get off the "XP lacks this..."
tone, roll up our sleeves, and develop that pitch. What's the one that you
have used so far?
Lowell
|
cc05fd02-7942-b8ad-17c9-c2e28876fb23
|
['0fb9dfac-e6af-2d7b-43e5-7a18381ba2f7']
|
<PERSON> -
I couldn't agree more and you stated it very clearly!
I think mission creep has the same weaknesses that you describe, but agree
that if the mission is moving as much as the scope, then heavy investment in
implementing the project is questionable.
Scope creep articulates a change to the assumptions on which a project
commitment was made. It expresses it in a way that puts responsibility on
the customer, as you describe. Given all the variables involved and the
clarity that comes as the project progresses, it is often impossible to know
if the scope has creeped or if the buffer available to handle the additional
"scope" that clarity has identifed has been exhausted due to an inefficiency
elsewhere.
Business most always must make commitments on a set of scope at some future
point in time. There does need to be a language through which to whole team
can communicate when these commitments are at risk. The cahrt, of course,
illustrates it nicely. Without identification of causes, improvement is
difficult at best. "Creep" is probably the condensing part of the phrase
that needs to be revised. Scope will, at times, expand, as will the time
required to complete a story or task relative to its estimate. A better
term is not coming to mind at the moment. "Expansion" is what is my head.
<PERSON>
|
25b7b5d1-dce9-c86d-91f3-154d366442d0
|
['0fba0d94-0624-5c76-9fdf-7c7c9c6154ce']
|
hey all,
I follow this list - as I think what has been done with pygame is amazing (kudos to
all involved)...
My professional background is in music/audio/recording, but I left that (glamourous)
life a few years ago to get into software - but am making my way back to that
"industry".
So, I am looking for a good project with someone who really wants an outside
perspective (yet cohesive meshing of ideas) to handle the sound design and
music composition part of a game they are working on.
Can handle the integration of the sounds/music beds into the game etc.
and/or work collaboratively.
All music/sounds will be top-notch and hopefully meet your expectations -
but, its pro bono etc. - but, I need this to cut my teeth on game wise... and
want to do so to make a killer sounding pygame! So let me know.
Also, which pygames should I check out for great sound/music design??
Regards,
|
1206e941-b468-cc38-59d7-8a46de77da87
|
['0fba0d94-0624-5c76-9fdf-7c7c9c6154ce']
|
<PERSON>,
Great article. Really great.
And you are an XML architect too. Your use of XML related technologies
in Civil are fascinating. I do xml/web app development by day (and night
these days) also. Python certainly provides access to the latest and
varied ways of doing things. But, doesnt it come down to speed? Isnt
that what say most game hackers at the studios for Activision or
THQ or wherever would say. They use C to get down to a lower level to
get more from the hardware?
This seems likely if developing for PC - since its hardware is so bungled
at this point (in terms of data throughput), but does their argument really
hold any water when dealing with development for P2, Gamecube or xbox?
I mean really none of those developers are trying to fit a whole game
on 3 - 3 1/2 inch floppy disks! And they have console power
out the wazooo.
So, can python/pygame/and supporting community make those
game developers (or have they already?) see that Python gives them coding
speed and could easily be used to glue together an optimized C library if
need
be - to get performance for a particular of a game? How does SDL really
compare
with other native Directmedia layers?
And Python is so suited for the evolving handheld game market - thinking
more
next-gen pda/cel phone market // not nintendo gba - has anyone seen what
Amiga
is up to recently with their DE portable / virtual processor os?
What if you could take:
PYTHON ===> JYTHON ===> Java bytecode ===> Use Amiga SDK to get Amiga VP
code?
Instant rapid game development and I would think a very optimized
application
size wise and access to VARIOUS delivery outlets...
Again, thanks for the article...
Take care,
|
08474cdc-81f9-bb10-dfb7-e328e1c37986
|
['0fbcb598-3489-a26e-946a-6b1217340fc1']
|
Hi <PERSON>,
this is a small set of sanity checks that might help people having a
smoother
running jack. They are performed when starting the server and won't
allow a
start if any of the tests fail. The tests can be disabled by passing
the --no-sanity-checks (-N) option.
The .c & .h files belong into the linux directory.
Flo
|
a25b95ee-2002-b0e3-f4cf-ac3afeceb3c8
|
['0fbcb598-3489-a26e-946a-6b1217340fc1']
|
Hi,
attached is a patch against the alsa directory of jack1. It adds native
32 bit float (LE only) support to jack's alsa driver, thus saving the
float conversion and one division/multiplication for each sample.
Since it's only a couple of lines (mostly indentation), it shouldn't be
a problem integrating it into jack2..
It's tested with the new hdspm driver. The HDSPe line has native 32 bit
(LE) float support for coreaudio - and now for jack :)
Flo
|
b185e3f1-2dba-bcec-cbe3-a310962bbcb9
|
['0fd5cddb-86e8-8714-ca8e-0660584e7ebb']
|
Suddenly I wasn't able to send mail as the SMTP server wanted password
and user ID (SM 1.1.16)
The values I inserted had not been recognized.
Therefore I copied from my backup the *.s and *.w files which are said
to contain the passwords, but it didn't work.
So I copied all files (without subfolders) and now it worked.
Can somebody please tell me which files may contain passwords and user
ID's in order to copy only the relevant files if this problems should
happen again?
Thanks
<PERSON>
|
5b09fc8e-9cf4-e2b2-a0e2-8c60eb4048a0
|
['0fd5cddb-86e8-8714-ca8e-0660584e7ebb']
|
On my account I'm getting all emails twice.
Now I want to send 2 of these double emails to my ISP in order to find
out the reason of this strange effect.
Can please somebody explain me what procedure I should use in order to
send a couple of these emails complete with all headers?
A simple forwarding allows me to send only one of these emails and not
the second one.
Thank you
<PERSON>
|
806df26c-6248-e119-cac0-803d4258ffbe
|
['0fda0789-f5da-b7e2-21c2-3e01353abe46']
|
HELO,
is there a way to include all updated packages from SP2 within the default
SLES installation media, so I don't have to carry 3 extra CDs?
Normally it should be easy to replace all new packages and to update the
package lists?! Is there a Script available, which could help me building
these iso's?
Best Regards
<PERSON>
|
0c625a24-5aaf-ef66-ba75-e36b10798334
|
['0fda0789-f5da-b7e2-21c2-3e01353abe46']
|
Hi everybody.
I have noticed that one main reason for the etch Release delay is the missing
of kernel 2.6.18 in the d-i. Now I wonder if its really necessary to keep the
installer kernel on track with the one that comes with the distribution
itself. The kernel on the d-i install media is afaik just used to initialize
the target hardware like cdroms, network cards or chipsets/controllers.
As 2.6.17 supports a lot of these devices and 2.6.18 does only a little more,
I am confused about this kernel rush for now.
Best Regards
<PERSON>
|
557f1c7f-1526-f102-a00a-ee6b957cae5c
|
['0fdc78e8-6b7a-a447-46cc-640287934750']
|
Dear all,
The version of readBin() in R-devel includes a use of match(), through
`%in%`, which can affect its performance significantly. By using
primitives instead of the rather expensive call to match(), I reduce
the time spent inside readBin() by more than 30% in some of my code
(part of the tractor.base package). A simple patch that does this is
given below. This passes "make check-devel" fine, and I don't see that
it could produce unexpected behaviour -- though I may, of course, be
wrong.
Regards,
<PERSON>
|
8ecc46d3-abca-e15e-bcc6-8e21b8bc59fa
|
['0fdc78e8-6b7a-a447-46cc-640287934750']
|
Dear all,
I'm pleased to announce the release of an R implementation of the
Self-Organising Migrating Algorithm (SOMA), a general-purpose,
stochastic optimisation algorithm. The approach is similar to that of
genetic algorithms, although it is based on the idea of a series of
"migrations" by a fixed set of individuals, rather than the
development of successive generations. It can be applied to any
cost-minimisation problem with a bounded parameter space, and is
robust to local minima. The algorithm was originally developed by <PERSON> [1].
I have found the algorithm useful in applications, and I hope others
will too. Testing suggests that for some problems SOMA substantially
outperforms comparable methods available for R, such as Differential
Evolution (the "DEoptim" package [2]).
The "soma" package is now on the main CRAN site [3], and is finding
its way onto the mirrors.
All the best,
<PERSON>
|
9c47d8c2-8071-ae58-c1e0-dae173edcc88
|
['0fde2abc-b6c6-cdec-4d65-e23faa90e5d6']
|
Hi all,
I'm looking to do traffic shaping in an isp environment with
shorewall and tc. I would like to create a configuration where each
individual address in a pool of addresses, potentially many more than
256, is assigned a queue, say a rate of 128k and a ceiling of 2mbit.
Is this type of configuration possible with shorewall?
Thanks much
<PERSON>
|
b2670004-6490-6dcc-4db2-2b16950a1e84
|
['0fde2abc-b6c6-cdec-4d65-e23faa90e5d6']
|
Hi,
I have a machine with iptables managed by shorewall with around fifty
GRE interfaces that route VOIP traffic. Currently each interface is
listed in routestopped and interfaces and shorewall takes a good six
minutes to restart. I'm wondering:
1) All of the gre interfaces are in the same zone, so I'm thinking
about replacing all of the gre interface configurations with a single
line "cust gre+ -". I believe that this would make shorewall start
faster, but would it change the firewall's behavior in any other way?
2) Is there a way to wildcard routestopped? Ideally, I could specify
"gre+" to leave all gre interfaces open, but leaving the firewall
completely open during a restart or in the event of a failure to
start would be ok as well.
Thanks
-Brian
|
917f256a-7a8f-94e5-0240-68bfdec8ae61
|
['0fe32946-d0bd-6190-66b4-23bb05381f3f']
|
Greetings,
I am trying install PHP and I get all the way through the (make) but
when it comes to moving the php executable to my cgi dir, I can not find it
anywhere.
According to the docs it should get copied to the src dir. Any ideas?
My servers environment is :
FreeBSD 4.6-STABLE #13
Server API: Apache/1.3.27
I am trying to install my own instance of PHP on a Pair Networks server and
they will not assist.
Thanks for any help
<PERSON>
|
a8a8ea48-0c8e-bfe9-2c6b-4be0167c736e
|
['0fe32946-d0bd-6190-66b4-23bb05381f3f']
|
I am trying install PHP and I get all the way through the (make) but
when it comes to moving the php executable to my cgi dir, I can not find it
anywhere.
According to the docs it should get copied to the src dir. Any ideas?
My servers environment is :
FreeBSD 4.6-STABLE #13
Server API: Apache/1.3.27
I am trying to install my own instance of PHP on a Pair Networks server and
they will not assist.
Thanks for any help
|
3c189acf-3b3a-dd5c-129a-2868bdc0fcd8
|
['0ff4dce7-63a5-4116-d7b0-312943a9f820']
|
I just wanted to say a big thank you to the Wikimedia DC Chapter, and especially to <PERSON>, <PERSON>, <PERSON>, <PERSON>, and all of the other wonderful volunteers who helped to make our meetup and edit-a-thon last Friday such a wonderful success. Your generosity and collegiality went a long way in helping the new editors and GLAM professionals in attendance feel more comfortable and positive about working with Wikipedia and Wikimedians.
You can review our results of the day at http://en.wikipedia.org/wiki/Wikipedia:Meetup/DC/WLL/2012/results
Don't miss the Storify summary at http://storify.com/silibraries/wikipedia-loves-smithsonian-libraries
Looking forward to many more GLAM-Wiki events and ideas to come!
Best,
|
923ebfb4-4792-ac0c-9410-58ffd93e4393
|
['0ff4dce7-63a5-4116-d7b0-312943a9f820']
|
Hi all,
I just noticed that the staff of the Architect of the Capitol have been releasing a selection of images under a US Government Works license on Flickr. There are some real treasures in there--worth a look, especially the U.S. Capitol Grounds set. From what I can see, most have not been put on Commons yet.
http://www.flickr.com/photos/uscapitol/
Cheers,
<PERSON>
|
ee9cae66-04bd-9a42-bdf1-d0afe0358cbe
|
['0ff82e95-afd2-c8e1-0fe2-6547a84834b6']
|
Hello,
Is it possible to use filter() to query objects based on comparisons
among attributes of the same object? For example, if my model Task has
two attributes start_year and end_year and I want to select all tasks
where start_year was somehow set later than end_year, I would try
something like
q_backwards = models.Task.objects.filter(end_year__lt =
start_year)
but that gives a NameError ("global name start_year is not defined").
Is there any way to reference model object properties on the right
hand side of the filter argument?
All of the query examples in the docs compare the value of some
attribute to a constant. If the answer is that you can't compare one
attribute to another, is there a preferred strategy for this? A model
method, or custom SQL (hoping to avoid that 'cause I'd have to learn
SQL) or ....?
Many thanks for any help!
DG
|
724a649a-4548-f717-bec5-ad57b524e2d4
|
['0ff82e95-afd2-c8e1-0fe2-6547a84834b6']
|
Sincere thanks to both <PERSON> and <PERSON>. Things are working fine now.
<PERSON>'s suggestion didn't have an effect, but after following
<PERSON>'s
debugging advice I found that while I had remembered to create a link
from
the httpd DocumentRoot to the project1 directory, I had not created
a link to the project2 directory.
For other newbies who might be trying to set things up this way,
here is the full combination of httpd, directory structure and
settings.py
information that is working for me.
Thanks again for the help.
-DG
|
bfab4ba3-f19a-02dd-b781-4b29749bfead
|
['0fff860c-f641-cd71-be3a-89d337c5ca63']
|
<PERSON>,
I think the ideas page sums it up pretty well. Matrix factorizations,
sparse matrices and general polish and bug fixing are the main goals I
had in mind, though we're definitely open to any other ideas you may
have. As someone with a strong math background, you could add a lot of
value by helping us figure out what features are worth adding in
addition to just implementing the features that have been previously
suggested.
Unfortunately, though, SciD uses template metaprogramming very heavily.
If you're not comfortable with template metaprogramming in either C++
or D (you imply that you have no experience with either language) then
you'd need to get up to speed very quickly. The project will have
almost zero chance of success if you don't master templates. If this
sounds too difficult, we still encourage you to submit a proposal for
another project that doesn't use templates or other advanced, D-specific
features so heavily.
<PERSON>
|
b22b8bb7-a9f8-a7a9-6d38-176875f610d6
|
['0fff860c-f641-cd71-be3a-89d337c5ca63']
|
Unless something has changed, the review of std.curl (formerly etc.curl
but I think there's some agreement now that it should be in std) ends
today. (<PERSON> is the review manager. <PERSON>, please make this
official.)
Since we have such an embarrassment of riches lately in terms of new
modules to be reviewed, we don't want bubbles in the review queue. The
first thing we need to decide is whether a review is allowed to run
concurrently with a vote. <PERSON> has suggested that reviews never run
concurrently with each other, and I agree. However, since the vote
stage takes up much less of the community's time, I think it's ok to run
a review and a vote concurrently with each other.
Either way, here are the potential modules for next in the review queue.
Which ones are the highest priority and whether I missed any.
std.log (Logging module by <PERSON>. High priority because
logging is a standard feature in modern languages.)
std.regionallocator (A segmented stack/region memory allocator, by me.
I'd like to fast-track this because it's used by two of the GSoC
projects that were done this summer so getting it into Phobos would
simplify things.)
CSV parser (By <PERSON>)
std.variant (Massive overhaul that includes runtime reflection, by
<PERSON>.)
|
6fadb8a3-96c6-c65c-6827-732ea4043fbd
|
['10016773-6d8f-3e1d-b270-003a2692cb42']
|
I run an anonymous ftp server using proftpd. Occasionally i see log
entries due to folks who misspell anonymous or use their own userid,
etc. Frankly I don't care what id they use when accessing the system
and I'd like to find a way to allow proftpd to accept any userid (it's
an Anonymous setup anyways) and not prompt for any password (preventing
clients from possibly sending a password in plaintext). Any ideas how
this can be achieved in proftpd? And... if it is implemented just how
bad would the absence of a password prompt from the server screw up
clients?
Thx,
-Jim P.
|
ea007e55-f0f1-810d-1722-b570a237ae5c
|
['10016773-6d8f-3e1d-b270-003a2692cb42']
|
(this has a techno angle and an Atlanta connection, so it's not too far
OT.... it also mentions beer)
If you had purchased $1,000.00 of Nortel stock one year ago, it would
now be worth $49.00.
With Enron, you would have had $16.50 left of the original $1,000.00.
With WorldCom, you would have had less than $5.00 left.
If you had purchased $1,000 of Delta Air Lines stock you would have
$49.00 left.
But, if you had purchased $1,000.00 worth of beer one year ago, drank
all the beer, then turned in the cans for the aluminum recycling REFUND
you would have $214.00.
Based on the above, the best current investment advice is to drink
heavily and recycle.
Happy New Year everyone :-)
-Jim P.
|
87b3217c-7211-754d-af4f-c5e56a811554
|
['1002ceeb-c461-d3e1-9269-7ba7af8b98b6']
|
Hi
I started using the noun phrase chunker to help work at a higher level than
the raw POS tagged tokens. However after giving it a test file i noticed it
had annotated one phrase which i'm sure if not meant to be. So i did a
little background reading on the origins of the noun phrase chunker in an
attempt to find out what was causing it. The sentence I have a problem with
is the following, where square brackets denote the noun phrases that were
annotated:
[The animals] were [given balls] to play with. [They] were then given
[food].
.The second phrase is the one i'm questioning, as it should really be just
[balls]. From reading about the background of the NP chunker i understand
its not going to be 100% accurate, but i wanted to raise this to see whether
the rule below is an over generalisation or a mistake. I have looked in the
archive where someone mentioned using a full parsers as the NP chunker was a
bit rough and ready. Is there anywhere which lists the different modules
with comparisons showing maybe performance over accuracy for each class. As
a beginner im struggling to determine whats best to use at the moment. I may
have just overlooked some existing resource if so a pointer would be greatly
appreciated.
Thanks
<PERSON>
|
6c9181bf-3399-6bca-610a-8523ab1e5f52
|
['1002ceeb-c461-d3e1-9269-7ba7af8b98b6']
|
Hi
I just want to check incase i'm doing something silly with using the
Gazetteer collector. It still seems to be usable component of GATE however
I'm still having no luck with the latest release. From an earlier 6 beta
release I ended up modifying a local copy at some point whilst in the middle
of something so didnt have time to follow up, but it still looks the same
problem might exist, unless of course i have done something wrong.
Couple of things from looking at the code. First it doesnt seem to enforce
that the annotation type being collected has a matching list. If no matching
one is found it will select the last list in the definition list being
enumerated which might not be whats desired. Also its not mentioned in the
documentation i think but the list filename must have a ".lst" extension to
match.
The bigger problem appears to be with the entries being added to the
selected list. Gazetteer lists now expect by default a GazetteerNode yet the
collector tries adding a string, which as far as i can tell will get ignored
without throwing any exception. I editted the code to create a gazetteer
node, optionally specfiying the feature separator and adding them if
necessary.
Could someone confirm that the gazetteer collector is broken at least when
using the default ANNIE gazetteer, or whether I'm using it wrong.
<PERSON>
|
585ddc07-1be1-0143-4bdf-963c167fc6cf
|
['10148e92-98fa-a171-c05e-77a6ec6d272a']
|
Hello,
now, i was hopping that installing one Perl interpreter would solve the
problem i have with the Apache Environment Variables (SERVER_NAME,
SERVER_PORT ...), that aren´t working. I´m trying to get them at one PHP
file (like 'echo "Server Name:" . $SERVER_NAME'). In my local workstation,
running Win2K, Apache 1.3.24 and PHP 4.2.0 it doesn´t output the values, but
at our webserver, running Linux, Apache 1.3.23 and PHP 4.0.6 it works. Some
one knows about this?
Thank you,
|
c679fdd9-fb25-c0bf-4343-a9f4da6da167
|
['10148e92-98fa-a171-c05e-77a6ec6d272a']
|
Hello,
I´m planning to use XML at Apache, and have visited http://xml.apache.org.
So, i have one question: To use XML, i will have to install J2EE (Java 2
Enterprise Edition) on the web server, as well as install Tomcat too? If i
understand, the XML is pharsed by Java language, but this does'nt sounds
pretty good for me.
Best regards,
|
5a140b42-888c-3c52-34db-e4671becff55
|
['101af424-dffd-8c07-ae82-6a91a5633360']
|
Few of the trackers run KISS which is part of the problem running APRSPoint
we ran into. We thought the Tracker2 - Alinco DR-135T internal board would
work with KISS but I am not sure if that question was answered for running
it with APRSPoint.
<PERSON> maybe able to answer if the setup your wanting to use would work or
not though.
Peter-N0WRE
|
15b28b24-ca76-1858-e407-67c91c9c8bd8
|
['101af424-dffd-8c07-ae82-6a91a5633360']
|
Good morning,
Been looking at running this unit for both APRS and possible RMS express. Is
there a smaller mobile rig that might fit the bill for this project? I am
seeking the information as I want to TX as well as RX for the project. Any
radio considerations that would work for this would be great to plug a cable
either in the mic or the rear of the radio and have it all work for both.
Thanks for the information on advance.
<PERSON>
|
0c3c7cd1-6ea2-1f3e-da3e-7363f3c59ab2
|
['103bb43f-a41d-95af-0a7b-84136a80662b']
|
i had the same problem, what OS did you download it under? i did mine under XP and the CD's were bad, the only thing they will do is boot, then after that they read, and no OS i have will read it. if you have a friend with good linux disks, see if theyll burn some for ya, thats what im ending up doing.
hopefully theres another solution, but thats the best i can find
<PERSON>
|
627fb725-35c3-4f0c-beeb-574567e982a2
|
['103bb43f-a41d-95af-0a7b-84136a80662b']
|
im trying to install Red Hat 8 on my PC, its got Win98 on there already, and it recognizes the CD as having multiple files on it, like it should. i put the cd in the drive and the installer comes up, and at the boot: thing i hit enter like it says to do, then when it gets to the menu: where is the source? or somethin like that, it cant find my cdrom... im using a Matshita 584 cd drive. it obviously works, linux tried to start... the system is an unknown Mother board, P1 200 mhz porcessor, 2 IDE 3 gig Western digital caviar hard drives...
tahnx for any help
<PERSON>
|
0890927c-bd05-0bc0-13c3-9dfe6617a26f
|
['103f315c-4c4d-503a-f6a8-39c653be2cb2']
|
Any opinions on the new Massacre release?
I think it is pretty great. Lots of fuzz bass and
crazy drumming plus feedback guitar all over the
place. Massacre was one of the first Laswell-related
bands I ever liked and this disc gives me what I want
from one his projects (even if it is more of a <PERSON> production).
Here's a discussion point for all of you:
What was the first LP/CD/cassette/12 inch/8 track that
brought you into the Laswellian universe?
<PERSON>
|
54ebb189-ea33-0439-bd08-fd7af0daf15b
|
['103f315c-4c4d-503a-f6a8-39c653be2cb2']
|
I just received the new <PERSON>/Bjorkenheim/Agren "Blixt" CD from Wayside/Cuneiform --- and it is fabulous. Very much like the first Arcana album with <PERSON> and <PERSON>. No "electronica," no "world music," no lame singers, totally awesome. This is the kind of <PERSON> project that made me interested in his music in the first place. Along the lines of early Material, Massace and Last Exit.
<PERSON>
|
33cd7c2c-3a7e-a4f2-62b8-d2c7c35d84f0
|
['1046283b-0f12-7eea-4b61-81a734918aa0']
|
Hi,
IANA has been asked to provide input to ICANN's board on the RIR-
consensus global IPv6 allocation policy (see http://www.icann.org/
announcements/announcement-14jul06.htm for details), so I'm looking
to understand what folks in the v6 operational community think.
One question would be the choice of /12 as the minimum allocation
size for IANA to allocate IPv6 addresses to the RIRs. Do folks
consider this
a) just right
b) too little
c) too much
d) why are you annoying me with this?
Another question: does your answer change with changes to either a
more conservative HD ratio or a longer minimum end user prefix length?
Thanks!
Rgds,
-drc
|
565c3ddf-5bf6-2f40-9d96-8b5b0deb567b
|
['1046283b-0f12-7eea-4b61-81a734918aa0']
|
Hi,
I'm not sure if this is particularly relevant to this working group,
but I thought I'd mention it just in case. ICANN has posted a
discussion paper on retiring country code top-level domains and is
requesting comment at http://www.icann.org/announcements/
announcement-2-05dec06.htm. If you have any thoughts or comments on
the issue, please feel free to make by sending mail to cctld-sunset-
<EMAIL_ADDRESS>.
Thanks,
-drc
|
38c3c4e6-6dd6-6568-cf4d-b8b9eb345b1d
|
['10477cb5-6191-a13c-470e-a8e6dc223256']
|
As far as I know, you don't. Usually SNAT is applied to packets heading
out an interface. The decision to send the packets out that interface is
actually a routing decision, not a NAT or Firewall, but despair not!!!
You need to use the iproute2 package and create a few entries using "ip
rule". If you want to email me a rough idea of what you want, I can
probably give you a script that will suffice. I am not an expert, but I
did manage to get a far more complex set of routing rules installed on
my firewall - works GREAT!!!! The wonderful thing is how low the
overhead is on the durn thing. (The not so wonderful thing is the
documentation for iproute2 ;-)
<PERSON>
|
9cae8fe9-e1d5-c86d-c369-587b4a943183
|
['10477cb5-6191-a13c-470e-a8e6dc223256']
|
I guess this is more of a syslogd question, but iptables is part of the
issue, so it's not too far off topic:
I have a Cisco Router on my ISDN connection, and behind the Router sits
an iptables firewall (RedHat 8.0). Behind the firewall is, among other
things, my loghost (RedHat 8.0 as well). I got syslogd running with "-r
-x", and it would accept redirected kernel messages from the firewall,
but would not register anything from the Cisco. I could see the packets
in the log being DNAT'ed, but I suspect syslogd rejected them as not
being from a local machine.
Instead, I started up syslogd on my firewall with "-r -x -h" and am
accepting the Cisco messages (coming from a local host in this case),
and forwarding them to the loghost (which seems to work). It took just a
little bit of rule-mashing to get things running smooth.
My question: this can't really be the best way to do this? Am I missing
something (or perhaps I just need a different syslog daemon)?
<PERSON>
|
9de92721-f17c-8b75-e59a-6094a1d41cbc
|
['104ca13c-bc4f-3565-e0cb-52cbaabcfc8a']
|
Hell[o],
Small typo fix for libavcodec/libpostproc/postprocess.c and missing check for
HAVE_ALTIVEC in main/libmpeg2/idct.c.
This two makes me possible to build non altivec Mplayer for PowerPC CPU
without any problems. I need to, because there seems to be a nasty bug
somewhere in AltiVec code.
When I try to play a low-resolution mpeg file (Possible all formats are affected.
I can't check because I have no other so small resolution files) mplayer crash badly
just after it opens window. Can anyone confirm this ? To try it just play a small
mpeg movie (In my case a 320x240 mpeg file) using altivec enabled mplayer.
Regards
|
f604acb7-a0e5-ddd2-0bfe-d0040b251033
|
['104ca13c-bc4f-3565-e0cb-52cbaabcfc8a']
|
Hell[o],
Some time ago a weird problem hit me from nowhere and generaly I have no
ideas what I can do about it.
The problem is related to my soundcard. Now I use SBAudigy card and ALSA
1.0.5a on Pegasos 2 machine with G4 1GHz CPU.
I like to listen mp3 files when working, but now it is impossible. After
random amount of time (Sometimes 15 min, sometimes 2h) music stops without
any reason and XMMS program displays requester telling me that I
should chceck is my card is propetly plugged in to the slot or is any
program use sound card now (This is impossible because only XMMS is running)
After such situation I can't find any errors or warnings in the log files,
completly nothing. Restarting alsa also not help only reboot.
This is realy anonying to reboot after 1-2h of work :/
No errors and random nature of this problems realy makes hard for me to fix
it or just say what is wrong.
First I think it's a hotplug (I upgraded it short time before this problem
apear) but not, second idea was a kernel but this was also missed shoot
because I have it on 2.6.5 and 2.6.7 kernels too.
Anyone can give me any hints ? If more informations are required just tell
me.
Regards
|
37a3fa36-8a14-12bb-7dda-8904bb694461
|
['105085dd-4f54-09b8-be51-8bbe4107e67f']
|
Hi,
Please read this, you need to implement partitioner.
It controls which key is sent to which reducer, if u want to get unique key result, you need to implement partitioner and the compareTO function should work properly.
[WIKI]
Partitioner
Partitioner partitions the key space.
Partitioner controls the partitioning of the keys of the intermediate map-outputs. The key (or a subset of the key) is used to derive the partition, typically by a hash function. The total number of partitions is the same as the number of reduce tasks for the job. Hence this controls which of the m reduce tasks the intermediate key (and hence the record) is sent to for reduction.
HashPartitioner is the default Partitioner.
Best Regards
<PERSON>
|
ac6d70b9-009c-a507-c71c-7ec618ba3be9
|
['105085dd-4f54-09b8-be51-8bbe4107e67f']
|
Hi, All
I have a small question about configuration.
In Hadoop Documentation page, it says
" Typically you choose one machine in the cluster to act as the NameNode
and one machine as to act as the JobTracker, exclusively. The rest of
the machines act as both a DataNode and TaskTracker and are referred to
as slaves."
Does that mean the JobTracker is not a slave as NameNode ?
NameNode and DataNode form the HDFS. Since the JobTracker needs to
interact with TaskTracker which resides in HDFS, to make the
communication easier, I think it should be at least part of the HDFS.
Best Regards
<PERSON>
|
0c898f61-3e6a-af20-e3db-7340034db4ee
|
['1057f2a0-e38d-d21b-2998-b567b355b5ef']
|
<PERSON>...
fwiw..I just added a new MBox 2 into my system. So..now, I have the Motu 828 Mk2 and the mBox running on my Dual 2.7 G5 with Tiget 10.4.3.
Now..here's the interesting thing (and I'm sure SOMEONE here can explain it).....
I did NO 'configuring of my system. I just plugged in the mBox and installed the PTools 7 software.
When I start Logic, it automatically plays thru the 828 MKII. If I start PTools, it automatically plays through the mBox (I have a little HOSA switcher that lets me route the outputs of either box into my Mackie 824's..I have no outboard mixer).
I haven't, however, tried to open both programs at the same time....that's on the list for tonight when I get home....
like I said..fwiw...
dave gross
|
8a38cd28-728e-6c1c-d68c-7a98e1569e80
|
['1057f2a0-e38d-d21b-2998-b567b355b5ef']
|
I'd love to try to mimick one of my favorite PT features for navigating around a lot of audio
regions.
in PT, when you have a track selected, when you TAB, the SPL moves to the beginning of
the next region. Hit SPACE, and it plays from their. Stop, hit TAB again, and it goes to the
END of that region. Hit TAB again, and it moves to the start of the NEXT region. Great for
instantly going to any beginning or ending of a region and starting from that point.
anything like that in L7??
man..i can NOT believe how much my little brain has absorbed in 3 days :) Especially with
some great tutoring from <PERSON> in Seattle!
Might have to start a little Logic Users Groups here and have some group training!!
once again..THANKS everyone!!! <PERSON>.
dave
|
01c64536-9971-6415-7642-650bb82460e2
|
['107e7697-793d-560f-8ca4-249e8e239512']
|
Hi!
Just as a followup to my email from last night: I think it makes sense
to nevertheless define interfaces for MsgData etc. because they also can
serve as documentation and help thinking about how you structure your code.
So my usual process is:
- Write an example doctest and refactor/change it until it makes sense
- From the result I might have identified some components. I write
interfaces for them which I use in the doctest
- I start implementing these interfaces while running the test regularly
to see where work is needed
- I revisit my code and add additional tests where I might have missed
edge cases etc. (this actually still needs to be done for the components
we have right now, esp. the error conditions which are hopefully all
defined).
And even if I don't plan to exchange my component I add interfaces as
IMHO this makes the intention clearer and adds some contract on how to
use the component.
I also sometimes factor components out in utilities or adapters if the
class grows to big and a tightly scoped functionality can be better
tested in a separate component.
<PERSON>
|
eef8d3a9-6914-26cb-6238-cf3f6481f2d8
|
['107e7697-793d-560f-8ca4-249e8e239512']
|
Hi!
With finally having svn access (is there a process in place now in case
some sprint happens and people need access?) I checked in some code.
The changes:
- cap objects will have proper names now instead of the memory address
when printed (just to make them look nicer). They also tell their URL then.
- The login now handles both the "normal" way of retrieving the seed
capability (via LLSD) and the way Linden Lab is handling it with the
redirect header (will this be changed)
- My doctest in login.txt passes now. For this I created a dummy
webserver as a WSGI application. You need to start it first with
bin/testserver before you can run the tests with bin/test. These tests
pass then. The server is implemented in tests/base.py (in the lib package).
- I added uuid, webob and wsgiref to the eggs needed as I am working
with Python 2.4 at the moment. This has no uuid and wsgiref shipping but
it should not matter. We can later remove it again. pyogp.lib.base also
depends on webob now which is a simple wrapper around a WSGI environment
giving one a nice Request and Response object. It is used in the test
server in tests/base.py
I hope everybody is familiar with WSGI as Linden Lab already uses it :-)
I really wasn't that much but read learned it a bit this weekend. Looks
quite nice :-)
Next steps I would like to do:
- create a branch for showing how grok works and how registering can be
done using it.
- create a networking layer abstraction. I was thinking along the lines
of some REST client which has methods such as GET, POST etc. which do
what their name say. It's basically a wrapper around urllib2 for now.
The advantage is then that it can be replaced for testing so that it
does not send anything over the network but instead calls the WSGI test
application in test/base.py directly and returns the result.
The question is what this network layer should return as urllib2 and
eventlet both probably return different things (other libs probably as
well). I was thinking about using the Request and Response defined in
webob as they seem to be good abstractions of a normal web request.
Moreover more and more python frameworks seem to use them.
You can read more about webob at: http://pythonpaste.org/webob/
What we probably need is request.headers and request.body, maybe
request.path
Converting this to and from urllib2 should be easy. Calling a WSGI
application with it is even more easy as it's meant to be used like that.
What do you think?
(btw, I have example code which does not work yet in the WSGI case but
should be fixable).
<PERSON>
|
a66e2b9f-a892-fc63-5169-9daa4b8771c8
|
['1080655f-9454-edce-cb7d-e956cf9afb1a']
|
It is very straight forward to setup a Broadcast receiver that is
called whenever a SMS is received, so I won't discuss it here.
Depending on the text in a message I'd like to ignore the phones
notification sound for just that sms message being received. The hard
part is the disabling the notification sound for just the one sms
message. I've encountered apps which can do this.
There is apparently a trick using intent priority to completely
intercept the SMS first and abort the broadcast. However this appears
to drop the entire SMS completely.
Any help appreciated.
<PERSON>
|
f494cff8-480d-1e79-66f4-c72cecc1d5a9
|
['1080655f-9454-edce-cb7d-e956cf9afb1a']
|
I want to build a project without using the Android MK files and
instead write my own Makefile to call arm-linux-androideabi-gcc & arm-
linux-androideabi-ld myself.
Any caveats I should know about? Is there a tutorial for this?
I realize this is not the ideal situation and I wouldn't want to go
down this route unless it greatly simplified things. The project in
question is compiling for three different platforms already and adding
Android would be much easier if I could just use the projects current
Makefiles and not duplicate a bunch into an Android.mk file.
<PERSON>
|
1c272f4a-6691-4545-9390-615f1f6d56fd
|
['1081d68e-41c1-e7d1-5769-95a1b466f457']
|
Ok, then, could you give it a try with this? It's an improved version of
previous scripts and I get the error always.
After executing it, wait for a moment after the end of directory creation
process and you should get it too (ls -l on client).
Anyway, you're right, it might be a fuse problem. Probably the problem is
related with the fuse kernel module, we are researching a solution by that
way too, but can't solve it by now...
Thanks again,
|
c5a914c9-ba71-c895-5e57-d41b85422332
|
['1081d68e-41c1-e7d1-5769-95a1b466f457']
|
Hi,
I'm working with the /proc/spl/kstat/zfs/arcstats of ZoL, and there are a
lot of things that I don't understand very well.
So, first question is: is there any documentation/manual where each of this
ARC values are well explained? I have looked for this at Oracle docs and
googling, but I haven't found anything accurate.
Now, some specific questions about it:
1. Looking only at this arcstats, is there a way to know if dedup tables
are fitting in RAM? I know how to calculate DDT sizes using zdb and zpool
status -D. But I would like to know a way to say if I have DDT at RAM or
not in an accurate way. I don't know what is the priority for the ARC (MRU,
MFU, DDTs, other metadata....)
2. Is there any way to know how much memory are beeing used by snapshots
and clones in an specific moment, also using this arcstats?
3. I have several systems with, theoretically, enaugh RAM to handle their
Deduplicated data. In general, 128Gb RAM for less than 9Tb of unique data.
I also have set the zfs_arc_max for using 120Gb and the zfs_arc_meta_limit
for using 60Gb. With this configuration systems should be happy, but in
some of them I have the arc_meta_used reaching the arc_meta_limit all the
time, So, sometimes the filesystem suffers performance issues. How could
this be explained?
Thanks for any help
|
83b6b93b-9768-b73b-2001-34c2ddba0b4f
|
['10aa469d-b6a1-b9ce-3970-6b4068f767ea']
|
We saw the "library etiquette" letter of 6/6/05 in response to the "<PERSON> Librarian" letter of late April or early May, but cannot find the
original letter. Does any one have a copy of the first letter they would be
willing to share? Like to keep track of the librarian image items. Many
thanks.
<PERSON>
|
255976ee-4ccd-8d72-1244-bb0b380dff49
|
['10aa469d-b6a1-b9ce-3970-6b4068f767ea']
|
For those of you who have a broader collection and can help me impress a VP,
I'm looking for the following article. Sorry, but this is all the info I
have (which is more than I was given)
Harvard Business Review
January 2006
Jeffery Pfeffer& <PERSON>
Evidence-Based Management
Many thanks in advance.
<PERSON>
Reed Health Science Library
Wesley Medical Center
<PHONE_NUMBER>
<PHONE_NUMBER> (fax)
T9E5I8wkA7Hlikq/@example.com
|
696de1d2-eb5b-f4e8-4508-50152f4f8d8b
|
['10abcd6c-3466-5882-7c53-ba89848c4430']
|
What about usage of ASN.1? It's simple and readable data declaration used in
telecom e.g. for network protocols formal description. Using open-source
cross-platform ptlib from OpenH323 project you can generate serializable C++
classes. There're different "archivers" that provides serialization in
binary and XML format e.g. Binary format provides good performance. Seems
it's what most games require along with small output data footprint.
Drawback: to change data declaration you should change your ASN.1
declaration and then regenerate C++ representation, not big deal tbh. Also I
doubt about portability to game consoles.
But the same question about boost::serialization: what about portability to
consoles, does anybody was successful to use it there?
<PERSON><IP_ADDRESS>serialization: what about portability to
consoles, does anybody was successful to use it there?
Andriy Tylychko
|
924520ef-b573-4112-7cc9-032d66194e89
|
['10abcd6c-3466-5882-7c53-ba89848c4430']
|
I capture network traffic on Debian 5 and 6 with libpcap v. 1.2.1 compiled
from sources. Then I send these traffic by pcap_sendpacket(). Sometimes
there're packets (both TCP and UDP) larger than default MTU size (1500
bytes). I cannot send these packets with error: "send error:
packetSendPacket failed". Found this post:
http://seclists.org/tcpdump/2007/q2/112 "[Patch] libpcap support for IP
fragment reassembly", but I didn't enable such reassemply.
How can I disable this reassempling?
Thanks,
<PERSON>
|
6ac744af-9378-1614-5efe-7cb72a44f82a
|
['10bd45f3-f53d-75f5-f10e-f7407b7af7f1']
|
We are using an Axis (Axis 1.1 final) client to send SOAP Messages with
attachments.
I was trying to find out how it might be possible to change the
character encoding of the SOAP part to something other than UTF-8.
By looking at the source code I found that the character-encoding in this
case is
hard-coded SerializationContextImpl.java and MimeUtils.java
UTF-8 seems to be also hard coded in case of a SOAP Message without
attachments
(see Message.java).
I was wondering that character encoding can not be configured in such a
great and flexible
toolkit as Axis is. Did I miss something important?
I did not look yet into the server side implementation. Can Axis handle
different character encoding as a server?
<PERSON>
|
5444fa4d-079e-06e7-83c1-dc6fb52cef5e
|
['10bd45f3-f53d-75f5-f10e-f7407b7af7f1']
|
<PERSON>,
I have no knowledge about the design decisions made for
the Axis-Ant tasks. I would also prefer to pass the task
itself a classpath.
But:
I my case it helped to put the service interface classes
into the classpath defined in the <taskkdef> element
of the axis ant tasks in order to let the Java2WSDL
task correctly find those.
Therefore I did not have to alter the classpath in my
shell to use Java2WSDL!
I am using Axis 1.1
BR
<PERSON>
|
2a783cfe-3056-9c55-b129-55e85b2087d7
|
['10d3a7b3-c10e-9cd9-a74d-d9c746b99bfe']
|
We are building a Rails app that has workflow requirements, and are
considering using ruote <http://ruote.rubyforge.org/>, a Ruby workflow
engine. From the outside in, ruote feels like a pretty good fit given our
requirements, so I'm very interested to hear from other who have production
experience with it.
1. Was there anything you learned about ruote from your experience that
you wish you knew going in?
2. Did you bump into any limitations with ruote that you found difficult
to work around?
3. What kind of architecture did you use (single worker, multiple
workers, remote workers, which storage option, etc)?
4. How complex were your processes/workflows, and how well did ruote
handle them?
5. How was the support from the ruote community?
Also, what other workflow solutions do people recommend taking a look at?
Thanks,
<PERSON>
|
242336f4-4e82-12af-5694-0d127164dcba
|
['10d3a7b3-c10e-9cd9-a74d-d9c746b99bfe']
|
Hello Fellow Rubyists,
We have a Rails app that we recently converted to Ruby 1.9.3 and Rails
3.2.8. This app has a feature to import data from a CSV file. After the
upgrade, we started seeing "invalid byte sequence in UTF-8" errors with
certain files that our users were uploading. Prior to the upgrade we had
never seen this error. Digging into it, the issue is that those CSV files
were not encoded using UTF-8 (or a UTF-8 compatible encoding), and
contained byte sequences not valid in UTF-8, which is the default encoding
for Ruby.
We have played around with using the charlock_holmes gem
(https://github.com/brianmario/charlock_holmes) to detect a file's
encoding, and then using that information to tell Ruby's CSV class to read
the file in that encoding but transcode it to UTF-8 before processing the
file. While this seems to work with some limited testing, I'm a bit
nervous relying on this approach since charlock_holmes provides a
confidence factor for the encoding it thinks the file has (between 0 and
100), and I've seen some numbers below 50. We've also tried the rchardet
gem (https://github.com/oleander/rchardet) with similar confidence
results. Guessing the wrong encoding could lead to issues processing the
csv files and/or wrong data being saved to the database.
We're thinking that our users are going to squawk if the app tells them
they have to convert their file to UTF-8 before the app will accept it, as
many of our users are non-technical in nature and won't have a clue what
character encoding is all about.
Just curious to know if anyone else has experienced something similar in
Ruby 1.9.x, and if so, can you offer any details about how you handled it?
Thanks,
<PERSON>
|
c4e2ae6c-22d7-92bf-7827-8bc79f1ea8b4
|
['10dc8f60-594b-58da-b452-a996e81b93f8']
|
Hi,
Does anyone know how can I query dgn attribute data. I have successfully
displayed dgn annotations using ANNOTATION type and LABELITEM="Text" in
mapfile but I would like to search for this attribute data and I don't
know how to do it. If I search for a "TEXT" field I get nothing. Do I
have to add another layer of type POINT or something?
Does anyone has experience in this?
Thanks very much
<PERSON>
|
a3ff60a2-0f77-72d9-062e-a9db5f936cd8
|
['10dc8f60-594b-58da-b452-a996e81b93f8']
|
Hi,
I have several line shape files showing the borders of different types.
I am wondering if it is better to merge them using ogr2ogr and tehn
classifying them in map file, or use all the files as layers?
Does anybody know the difference in speed/performance?
By the way, I have one more question related to performance. Is it
better to place all symbol definitions in symbol file or define them
directly in map file?
thanks very much
regards, <PERSON>
|
706a6af3-9d9d-7b86-10e0-b9e6de8cfab5
|
['10e5d5fc-4945-6f96-3d97-4555952044f7']
|
Hello,
Is there a work around to avoid monolithic compilations per browser
AND per locale? In other words can the locale be loaded dynamicaly at
runtime from the boot script or the application code?
Additionaly, and related to the above, can the application bundle be
separate from the browser abstractions and each part be loaded
dynamicaly at runtime from the boot script?
Thanks
|
0db2847b-7ad8-668b-6998-f1af36009414
|
['10e5d5fc-4945-6f96-3d97-4555952044f7']
|
Hi, I am still new to GWT.
Is there a guide on how I can make a project portable across different
operating systems and setups? So far via the projectCreator /
applicationCreator I see many of the generated artifacts are "hard
coded". For example the GWT installation directory in the scripts and
in the eclipse files.
My situation is this. I have been working on a project using ubuntu
linux + eclipse. Now I want to bring other people in though they use
either Windows or Linux but with different GWT setup.
<PERSON>
|
d3782e3b-b601-f3ce-0735-c485a62c5bdc
|
['10ec9f44-20f6-2b2c-33e9-5bc8bcdb5ac3']
|
Hello all,
I am using an wx.HtmlWindow so that I can display text with
different fonts/sizes/colors, use table-based layouts, etc. Now
I want to have the user click on some text in the window, and
have my application do something based on what word was
clicked. The demo shows how to get the html cell that was
clicked, but how do I get the textual contents of the cell?
Thanks...
|
7db91600-735d-5966-a346-715262f46873
|
['10ec9f44-20f6-2b2c-33e9-5bc8bcdb5ac3']
|
I asked this last week but no responses...
Anyone?
I am new at Bacula and am trying to work out a ]
reasonable scheme for backing up my home network.
I had some questions I hope someone can answer...
1) Sometimes my Bacula server machine is down at
the scheduled backup time. No problem, I just
kick of the backup jobs manually the next morning.
Is there some way to start all the jobs as though
the time was last night? Right now I start each
of the five client jobs, and the catalog job
individually. (I was a little surprised there
is not something like a JobSet resource for
aggregating several jobs into one schedulable
unit.)
2) I write each job to a separate (file) backup volume
(to be written to DVD later). Is there any point
to writing .bsr files? They are for locating a
particular job within a volume that contains multiple
jobs, yes?
3) Is there any supported way to change the labels of
existing (file) volumes? I have changed the label
format several times and don't want to wait until
some of the old volumes expire after a year to get
rid of the volumes with "weird" names.
Thanks for any information/advice.
|
aaf21c69-8eb6-14d1-7e32-9bb2cf3ab1dc
|
['10fab71a-1947-9ded-d807-e94b73c9a763']
|
Hi,
I create an 4x4 appwidget with minWidth and minHeight set to "250dp" as it
is suggested in
App Widget Design Guidelines:
http://developer.android.com/guide/practices/ui_guidelines/widget_design.html
It is ok on every phones and phone-sized emulator I have tried but if I
test it on a tablet (Xoom or Nexus 7) or on an emulator (resolution:
1280x752 with dpi 160)
then the launcher detects it as 3x3 widget.
What am I doing wrong?
Thanks,
<PERSON>
|
2edd3ffa-0294-3bb1-781c-165b8b273988
|
['10fab71a-1947-9ded-d807-e94b73c9a763']
|
Hi,
I would like to switch screens by swiping left and right.
I have a ScrollView inside a GestureOverlayView and everything is OK
until I use a SeekBar.
But there are SeekBars inside the scroll view and if I change the
seekbar value with my finger by moving it to the left or right then
the gesture view also detects swiping gestures and changes screens.
How can I stop delegating ontouch events when seekbar is changing? Or
are there any other solution?
Please help me,
Thanks, <PERSON>
|
dc148fa6-3956-ebc9-4e44-d4aad4ab4747
|
['10fe089f-5968-5b7c-849a-28353efbaa96']
|
Well, I did not try with mem=2G boot option,
but swapped the firewire cables .
I have presently 2 cameras, one COLOR and one B&W, both from Point Grey.
The COLOR one was connected with 3m cable,
B&W one with 0.5m cable,
and I got that black-images trouble, on COLOR camera only.
Camera-rest (with coriander or in my app) or dc1394_reset_bus did not help,
but disconnecting/reconnecting camera always helped.
Now, the COLOR one is on shorter cable,
B&W on longer,
and I did not get any problems (cold-booted 7 times - allways works).
It must be a combination of cable length + camera type.
It seems that firewire cabling is quite sensitive.
Sorry for troubling you.
<PERSON>
|
8808aa6f-f320-12c0-f563-2fac9a08a486
|
['10fe089f-5968-5b7c-849a-28353efbaa96']
|
Hi again.
I got now PCIe card: EXSIS EX-<PHONE_NUMBER>-L
lspci:
FireWire (IEEE 1394): Texas Instruments XIO2213A 1394b OHCI with
3-Port PHY (rev 01)
Now it works better with DualCore.
It works, as before, perfectly with only one core enabled.
New DualCore situation, both cores active:
Now I get Format 2 Mode 4 = 1600x1200 RGB working 3.75 fps without any
problems, but 7.5 fps still has problems.
It works OK for a few seconds up to 30 seconds or so, but then come a
few garbled frames, and then OK again.
In Format 7 Mode 0 RGB, 1600x1200 it works fine up to packet size ~5000
bytes (before ~2000), but above 5000 problems start.
So where could the problem be?
In the card itself?
In kernel?
In kernel-driver?
Coriander?
|
a2c1e6cb-c742-0dd2-7cb3-368e009f8be0
|
['11057958-260d-8ca6-f901-66678619f298']
|
Hello
Art non-programming related
Osg - ive files
Setup 5 tiled textures used as diffuse colors = 200k
1 large texture used to lightmap scene = 1meg
Problem
Ive file contains imbedded lightmap for each use with diffuse
resulting in large file.
Osg format has each diffuse with same lightmap listed as texture
units. Much smaller as only one copy of lightmap needs to be saved in
'images' folder.
However on loading of .osg the lightmap appears to be recopied into
memory each time it is read in the .osg file, so large amounts of ram
still needed on copies of the same bitmap data.
Question?
How can osg simply reference a texture already in memory, so after the
first loading of the lightmap other textures using it do not reload but
simply reference the already loaded texture.
Thank you Mr. <PERSON>
|
5ed55c64-9488-4fbd-0f73-54242a52e445
|
['11057958-260d-8ca6-f901-66678619f298']
|
Hello
Use osgexp and 3ds Max(v8) all the time, most often with Delta3D, and
have no problems with repeating UV's.
Open your .osg file
Where it describes your 'textureUnit'{ Texture 2d{
Look for
wrap_s and wrap_t these should both be set to 'REPEAT'
osgEXP should handle this without your needing to modify your file
Mr. D
|
a279d552-90a7-d0dd-e316-120296e06ca0
|
['110a1dac-ec10-346a-d583-b15bfeb452fc']
|
Hi all,
I've just updated my web page to reflect v2 of the Transport Stream support patch for mvpmc:
http://hoglet.homeip.net/mvpmc
This addresses all of the known issues with v1.
Changes in v2 include:
a.. The TS demultiplexor now uses a port of libdvbpsi to parse the Program Association Table (PAT) and Program Map Table (PMT) from the transport stream. It uses information from these tables to correctly configure the demultiplexor. Details of all descriptors in the PMT are logged, to help diagnose problems in the future. The build scripts have been patched to include libdvbpsi.
b.. The issues with multiple audio streams have been addressed. The TS demulitiplexor now re-writes the stream-IDs of the audio streams.
c.. All subtitle streams are dropped, until we determine whether the existing subtitle processing is expected to work with DVB subtitles. Currently it appears not to.
d.. The existing PES demultiplexor has been patched to allow audio stream IDs C8-CF and video stream IDs E8-EF to be decoded.
e.. In video.c, the size of ts_buff_static has been set back to VIDEO_BUFFER_SIZE again, and the size of in_buff_static has been increased.
If you have any problems with specific streams, take a look in the log file, as quite is a lot of useful information is now logged.
regards,
Dave
|
7c433242-f653-d3e9-2f4c-71ea9d27fde2
|
['110a1dac-ec10-346a-d583-b15bfeb452fc']
|
Hi all,
I've attached a small patch to try to correct the issue people have been
having with certain TS encoded video streams freezing a few secs after
startup.
It only affects one file (release/mvplib/libts_demux/ts_demux.c)
The patch is attached to this email, and is also available is here:
http://hoglet.homeip.net/mvpmc/mpeg2ts_v3.patch
I've also updated the web page to describe the changes:
http://hoglet.homeip.net/mvpmc
It would be great if <PERSON> could try this out on the files that were
causing him problems, and let us know if this helps.
regards
Dave
|
d9f9f7c8-65cc-6f75-3f75-2f827bc6356b
|
['111a9720-9e5c-b933-992e-9d81b64829cd']
|
I have always found that I need support from Spring to tell me if a
dependent object has been set on my object instance. Usually I need to write
code to the IInitializingObject to manually check that. I'm wondering if
Spring.net can take advantage of a custom attribute, something like
"RequiredPropertyAttribute" on "required" dependencies and report errors if
such requirement is not satisfied. Better yet a special Spring-aware config
editor can find such properties and insists authors to provide values for
them at design time.
Any thoughts?
Br
|
a966c376-c3eb-e8ae-a38e-eb6d1f052cec
|
['111a9720-9e5c-b933-992e-9d81b64829cd']
|
Thanks for making my question code clear. That's exactly what I'd like to
do. I wanted to use Spring because I may have other parameters that I'd like
to pass to each of the child form instances, such as DataSources etc, which
is also configured in the Spring. If I decide that I want Spring to create
new object for me, I'd want Spring to wire it up too, instead of doing
post-processing myself. I hope this makes sense.
Br
|
a4b4d231-90a0-fe5e-0352-25fd5c327044
|
['11330351-b3f6-f556-9a90-a9ecac9795d8']
|
<PERSON>,
I have attached the tutorial. It doesn't cover a large existing project, but I am betting that I will find the process to be essentially the same. I have not tried it yet on my larger project and that is why I am unsure. I probably will soon though.
<PERSON>
|
089e2d2c-0923-203f-6b9d-9f1880d9bce1
|
['11330351-b3f6-f556-9a90-a9ecac9795d8']
|
I have run into something very strange. I have a file writer, and I can
use that file writer to write to a file when I call it from the signal
handler for a button that is on my own dialog (and the dialog is brought
up by a signal handler for a menu item in my application). However, if
I try to do the same thing from the signal handler from my File->Save
menu item, it hangs the application (it is freezing on the first
ofstream::write() call). Is there something special I need to do to
write to files from different places in a gtkmm program?
The file writer is fine I think because it works when called from the
dialog and in a command line driver program I wrote to test it.
Any ideas of what is going on?
Thanks!
<PERSON><IP_ADDRESS>write() call). Is there something special I need to do to
write to files from different places in a gtkmm program?
The file writer is fine I think because it works when called from the
dialog and in a command line driver program I wrote to test it.
Any ideas of what is going on?
Thanks!
Mark
|
4e667662-e547-717c-7ee1-23595c15d950
|
['1136e030-3ef1-252f-41ed-4c1eb0a3d017']
|
Thankls everyone for your opinions on which way is up.
Does anyone have an original stylus to sell for cheap for the 2100?
mine didn't come with one, and if it wasn't for Mr. <PERSON> i would be
tapping with my fingers:) but i would really like to find the original
one because the plastic one i got looks too much like a toy and it is
always missing and end up finding it with my daughters toys.
<PERSON>
|
e90c869f-b1ec-1087-40eb-4db836987ded
|
['1136e030-3ef1-252f-41ed-4c1eb0a3d017']
|
Was thinking about trading my Siemens Notephone for a mint MP2100
with accessories. My Notephone has been converted to an english
rom. If I decide to do a trade the tradeee will have a complete
background check to make sure my beloved notephone goes to a good
home. I just figured since I never use it i might as well set it
free, unfortunately the only thing i'll trade it for is a MINT MP2100
with accessories, your asking too much you say? no problem i'll hang
on to my Notephone.
Interested parties contact me offlist
Richard
|
434b06eb-2a42-aecc-1efc-01182ef353ba
|
['11487d44-a0fc-b4a4-0646-e4ac3cbfe559']
|
I had a question about a disparity between the subversion client
configuration file that is provided here [1] and the verification test noted
on the same page. For many of the file extensions listed in the
configuration, the svn:keywords property is set to just "Date Revision".
The verification steps say the output from svn propget svn:keywords
test-auto-props.xml should be "Date Author Id Revision HeadURL." Which is
correct?
[1] http://cwiki.apache.org/GMOxDEV/subversion-client-configuration.html
Thanks,
|
0be2f8ae-4550-ff8c-b03e-7302879bceb5
|
['11487d44-a0fc-b4a4-0646-e4ac3cbfe559']
|
Through some testing, I found that the NIO connector in Tomcat 6.0.14 has
some issues handling heavy load. These issues appear to be fixed in Tomcat
6.0.16. I'd like to upgrade trunk to use this new version of tomcat. I was
going to upgrade branches 2.1.x while I was at it. Any objections?
Thanks,
|
fc72e19b-eac0-0ccd-ef86-69a4c28f005d
|
['114b3ca1-ce68-15ac-febe-57b88c240ba8']
|
I have a book with parts, chapters, and sections. I'm trying to show a TOC at the book level with parts and chapters, and a TOC at the part level with just chapters.
It seemed from initial inspection that I should be able to set toc.section.depth = 0 to include everything exception section titles. But this doesn't do what I want: at the book level, this just shows the parts in the TOC. At the part level, it shows chapters (this is correct).
If I set toc.section.depth = 1, it goes too far: at the book level, it shows parts, chapters, and first-level sections, and at the part level, it shows chapters and first-level sections.
So what am I doing wrong here? With a depth of 0, the book TOC shows too little, and with a depth of 1, it shows too much!
Thanks,
- <PERSON>
|
76bcd168-294c-5897-fb39-0521bf28a983
|
['114b3ca1-ce68-15ac-febe-57b88c240ba8']
|
Hi all,
I'm currently working with a cross-platform C++ app that talks to Matlab through its COM interface (on Windows) and its shared library interface elsewhere. We use this to drive Matlab (and call Matlab functions) from within our own scripting language.
I'm wondering if there's a way to call Octave in the same way. Is there a "liboctave" that a third-party app can load and talk to, send commands to, get results from, etc.?
Thanks,
<PERSON>
|
9a03888c-4994-688c-5f10-eb0bf183f5c9
|
['11501f2a-5b45-46d1-c80b-32ad24b4ccbe']
|
What do you mean by all when you say the mga fb driver supports all of
this? Do you mean the stuff you said <PERSON> was needed for (DVI on g450/550,
multi-head on g200 MMS etc)? Is the mga fb driver you mention the mga
driver included in XFree86? Using this I find that I do need <PERSON> for DVI
on the g450.
Regards,
|
3d993f8b-4a9c-0a29-5f74-ab392e9d1230
|
['11501f2a-5b45-46d1-c80b-32ad24b4ccbe']
|
I have experienced a number of build problems on Solaris 2.5.1 x86. Most
of these I believe would be problems on any system that does not provide an
implementation of snprintf. Below are patches that enable 4.4.0 RC1 to
build on our system. Many of them are reversals of changes that were made
since 4.3.0. I don't know what the reasons for these changes were, so the
author(s) of these changes may want to review the patches to see if they
are appropriate or if some other changes are needed to fix this. The jmp
changes are ones that I also had to make for 4.3.0. I think the
replacement code I just got from the 4.2.0 or 4.2.1 versions, so quite
possibly will have some effect on other systems.
In case it makes a difference, the changes between my host.def and the
supplied xfree86.def are also included here. Note also that I have
disabled BuildGlxExt since I could not build with this for 4.3.0. I know
of one other person who had the same problem with Solaris 8. I will retest
with "#define BuildGlxExt NO" commented out in the next day and
post the results to the list.
I am happy to test building on Solaris 2.5.1 x86 for any changes that are
required. I have not tried running XFree86 yet, but suspect that I may
have to make similar changes to those I had to make to 4.3.0 to get it to
run. I will also provide these details in a separate post if I have any
troubles.
Regards,
|
eab88270-1dcd-0548-1905-9caa6ef50e4a
|
['11546637-aa01-41ae-c3b9-cdcf6f9a5b09']
|
Hi <PERSON>,
I'm writing a dselect-like tool for NetBSD binary package repositories,
and was wondering if there is an 'official' reference / code blob about:
* how package version strings are to be compared;
* how requirement strings are to be expanded in a boolean expression.
pkg_info(1)'s man page gives strong hints about this, but is not really
a spec :)
Cheers,
|
b3d6dbd1-9412-d792-6196-9f86d2b499e7
|
['11546637-aa01-41ae-c3b9-cdcf6f9a5b09']
|
Hi <PERSON>!
I've been using Fink for a long time now, and I've recently been hired
by Sun (summer internship) to create/port a debian-like packaging system
to Solaris.
I've a simple question: do you devs, who know Fink's internals, think
it's easy to port to Solaris? Given 'dpkg' and 'apt' already have been
ported?
Cheers,
--mezis
|
1d303b0d-02eb-af77-5d8d-01f364f4f192
|
['1168f05f-678c-26b8-0e8e-3796ef2bce01']
|
Hi,
We have developed a small RoR app that runs fine on a standard IBM
thinkpad (1GB mem) but runsmuch slower when on an IBM x460 Redhat
machine (32GB ram).
The x460 server has hardly any thing running on it at present, so that
not the issue.
We are busy checking the config and permissions of the user account
used to run the app., but I was wondering if you guys have heard
anything about redhat and RoR, that maybe causing this issue?
Cheers
<PERSON>
|
8c2edde2-0c2a-02bf-c5ab-020818103fc5
|
['1168f05f-678c-26b8-0e8e-3796ef2bce01']
|
Sadly, going from what you describe, your team aren't doing agile. I
say sadly, because if you were, there would be no release testing.
Agile projects use the concept of "Continuous Testing". The team test
everything, everyday. Using test automation techniques, we can perform
continuous regression testing throughout the project.
Now, it's generally not possible to have 100% test automation and so
some manual test will need to be performed. This should be done during
every iteration. The last iteration should account for the time it
takes to rerun all of the manual tests. Testing is not a phase in
Agile. Create Test stories to account for the time it takes to
manually test.
I wont go into details about how bad it is to use branches for
sprints...suffice it to say, that it's an anti-pattern...it's
bad...don't do it.
Now to answer your question....well I would allocate an entire sprint
to testing and have the whole team test. In Agile, testing is not the
sole responsibility of testers.
Regards
<PERSON>
|
18448eb5-20d5-c0a4-93cf-5bed1470bfb7
|
['116ad93f-f323-4507-9659-eb3409021e7a']
|
Hi,
I just put a big patch for JOSM into Trac (ticket #1589) to make JOSM
look and feel a little bit less foreign on OS X.
As soon as someone includes it into JOSM, the following will change on
OS X (only):
* Menu bar will be where it belongs (but: won't work with Metal and
CDE/motif LookAndFeels). Menu options Quit, About and Preferences will
also be where they belong (and this works for all LookAndFeels)
* Hotkeys will use Command instead of Ctrl (some plugins may fail here)
* Command-Q can be used safely without risk of data loss
* If you have Quaqua installed, you can select it from the LookAndFeel
list and get an almost native file open/close dialog
Just a little forewarning... ;)
cu
<PERSON>
|
f6294595-3e08-deb0-4098-6a1de2c71f91
|
['116ad93f-f323-4507-9659-eb3409021e7a']
|
Hi,
is by chance someone here who knows how to find out which keys the
current keyboard really has in Java? At the moment, I can only find out
which ones it could have, but it would be more user-friendly to just
display a selection. ("F24" is harmless, but users will be puzzled by
the "Copy" key, I'd say...)
<PERSON>
|
668f41e1-7010-a53d-6e1c-df654fb0b6f7
|
['117268ad-19c4-79cb-795c-b2fbda8db65a']
|
Hi,
I need to find out where is a particular perl
version is installed in a network/machine. If there
are more than one version of perl installed i need to
pick up the correct version of perl executable.
What is the easiest way to do this?
Thanx in advance,
Prakash.
|
b059c259-7420-e769-7a6c-6df791b3c9cb
|
['117268ad-19c4-79cb-795c-b2fbda8db65a']
|
Hello,
I am a new member. I'm working in Texas
Instruments. I downloaded the Solaris version of yahoo
messenger from
http://in.docs.yahoo.com/messenger/download/unix.html#solaris.
I copied the tgz file into my home directory.
In the site it is mentioned that we need root
permission to install messenger. I wont have root
permission in the company. When i run the install
script i got the mesg. as "You are not installing with
root permission. Only you will be able to run the
messenger. Proceed anyway?" I clicked yes and it said
"Cant access installation directory" and it aborted.
When i tar ed the file it created two other files
pkginfo & pkgmap but i couldnt make out anything from
that.
Can anyone help me to install this onto my machine.
BTW my m/c is Solaris 5.8.
Thanx in advance,
Prakash.
|
460edf8a-99dc-aeb0-0f7b-c1d202c6c8f9
|
['1190484c-463f-d93e-13be-487f0bc3abe9']
|
In Somerfield just now found a new Chip & PIN keypad with card slot and
display. Too small, no shield to stop people watching, and positioned so
that you have to lean over towards it (thus making it even easier to see
the PIN being typed in). A disabled person could not use it.
Bristol is the HQ of Somerfield...
<PERSON>
|
8b16767d-9d61-0a2f-e7c1-b1c245179ce8
|
['1190484c-463f-d93e-13be-487f0bc3abe9']
|
"UK.gov delays new data breach powers: ICO still waiting for teeth"
http://www.theregister.co.uk/2009/04/09/ico_fine_powers/
"The government has failed to meet its own deadlines to bring in new
powers for the Information Commissioner's Office (ICO) to fine companies
who lose personal data.
The Ministry of Justice won't say when it plans to publish the secondary
legislation needed to set the fines or why it did not meet its March
target."
<PERSON>
|
fff68d7d-f7aa-8a6d-56da-f5abfe6dffb4
|
['11a1e627-784a-8f90-df81-e99cb3768cd9']
|
Yes actually still using it without problems. I actually emailed <PERSON> to see if he knew of anything but didn't hear back from him.
But, wondering if the newer version (that you link to which is cf_payflowpro http://cf_payflowpro.riaforge.org/ ) works/can be installed in CF 10? Anyone using that in CF 10? I am going to test today, but just thought might save myself some time or headaches if someone already knows it doesn't work.
Thanks.
|
63ebb279-0671-8c23-f14b-8bb7a6e123a6
|
['11a1e627-784a-8f90-df81-e99cb3768cd9']
|
Hi everyone - we did some major site upgrades in early October, and since then we have an ongoing issue plaguing us. I have not been able to identify a pattern, but thought on the off chance anyone else has seen this or heard about it, I would try the list.
When we upgraded hosting, we upgraded to Windows 2008 r2 (from 2003), upgrade to IIS 7.5 (from 6.0), and upgrade to CF 10 (from 8). Running latest patches/services packs issued as of 12/29. (The site has been running since CF 4.5, with many updates along the way.)
The problems seem to affect mostly MAC users, but only a small percentage of them, not all MAC users. However, it does seem primarily MAC - and no consistency/pattern related to Browser type or MAC OS or device.
The site is www.VLH.com<http://www.VLH.com> . Basically the site freezes up and/or becomes unavailable. Some users just experience very slow connections and have to sign in and out a few times. Other users are just completely unable to access the site, and when they try, the website just does not respond, times out displaying white screen, or says it is unavailable. Some users are actually still not even able to access the site the next day. It almost seems like it could be a session issue or corruption or something. We never had these issues in our prior environment. I cannot find anything in CF logs at the times of the occurrences. I have our host enabling some additional IIS logging and tracing.
Please let me know if anyone has any ideas/thoughts. Or if you can think of any ways or logging to try to identify what is happening. I have tried to reproduce on many occasions, but have not been able to, and we have many people using the site with no problems at all.
Thanks for any input!
Kind regards,
<PERSON>
|
bcc2b720-8037-01d7-f790-077e32c1e221
|
['11aa19da-6293-9c87-c18c-cdef30a68345']
|
Hi all!
In first place i'd like to say this is great software :)))
But after setting everything up i've found some issues :(((
When i do a manual discover on a host everything goes OK (it seems so)
but when i try the Performance tab i get some errors. JFFNMS complaints
about no rrd files created yet for each interface i want to monitorize.
I've been looking in the archive but haven't found any usefull topic,
some help would be appreciated.
TIA
|
a33e6e4b-2bff-9103-78be-d3563a8e665f
|
['11aa19da-6293-9c87-c18c-cdef30a68345']
|
It would be nice to see not just graphs but a sheet showing information
of the host.
Some kind of a page in plain text displaying host information, number of
proceses it's running, users connected, OS version, temperature,
voltalges...
Has anyone implemented it? If not, how would be the best way to achieve
this?
Salu2.
|
6c65686e-2772-ca48-b840-c7e762529185
|
['11b1ecd8-1bdc-f463-3384-aba6f3b82d8f']
|
In regards to your nvidia problem , check out dev
Mepis digest Vol 14 issue 26 and 30 if it seems the
same the workaround is there too. You probably wont
like it but its the only way i found to get 3D working
with my card .
there is a known problem with the 6629 nvidia
driver with some cards . My previous posts go into
detail about it .
jim
|
b49c7fe9-d08d-0197-c8ba-cdbda04b6071
|
['11b1ecd8-1bdc-f463-3384-aba6f3b82d8f']
|
for any one with the nvidia gforce fx4000 cards that
wont
work with the nvidia 6629 driver in the 2.6.10
kernel.
its possible with some to use the nvidia 6111-1 driver
with SM2004.06 . i know its going backwards but its
better than trashing the card .
the nvidia-glx_1.0.611-1_i386.deb driver can be had
here
http://debian.experimentos.cl/debian/pool/non-free/n/nvidia-graphics-drivers/
after downloading clicking on the file kpackage
manager poped up and was installed with same as normal
user after root password prompt .
i would post this on the forum but havent got past
login so far, no matter what i do !
maybe someone else can do it i know there were others
with this issue and anyone should be able to install
this file its ready to go .
<PERSON>
|
67d1a432-fdb0-625e-5b74-d00b690e7483
|
['11ba09b0-bf60-c831-7363-046b01f1b018']
|
Hello <PERSON>,
Thanks again, using the constants gives more control over the final image.
I've just build a simple sharpening filter that fits my needs (image data
only), but will try to extend it to be a real vtk Filter and contribute it.
(Btw: the link didn't work, the server seems offline .). I've created two
widgets also, that may be of interest: A circle widget and a border widget
(I know that there is a border widget already, but it's usage is different).
Both widgets can be used similar to vtkDistanceWidget, by adding two handles
that define the radius/diagonal. Both widgets return it's representation as
polydata (to be able to use them for probing). Well, they are written using
the "old widget style" having both representation and widget in one class,
so I'll need to change that first.
Regards,
<PERSON>
|
1e618a49-1407-e330-a400-7ed2da6c2fb1
|
['11ba09b0-bf60-c831-7363-046b01f1b018']
|
Hi,
Of course you can change the TF via mousewheel, but I guess if using
softwarerenderers only it won't be as fast as in the video.
Just write an eventhandler (vtk) that will be triggered on mousewheel move
(event) and change the opacity function gradually.
Don't do it like in your example using fixed values (the switch), as you can
see in the video the transition is very smooth, so just increase/decrease
those pointvalues minimal.
The VolumePro boards are used via wrapper classes like this:
http://www.vtk.org/doc/release/5.2/html/a03012.html
Although I think Osirix uses improved version as the VolumePro1000 is quite
old. Anyway the usage is similar to vtkVolumeRayCastMapper.
If you want interactive performance, try using vtkVolumeTextureMapper3D it
uses consumer graphics cards and is quite fast (but the quality is not as
good as the softwarerenderers)
For really good performance you will need a graphics card with high memory
bandwidth (e.g. Geforce 280GTX).
If you want to stay with software rendering use
vtkFixedPointVolumeRayCastMapper, its much faster than
vtkVolumeRayCastMapper (but quality is minimal lower also).
Use a QuadCore CPU ;-)
Good luck
<PERSON>
|
20bf71ef-ffb3-74de-d103-775c92307b4f
|
['11c1e44f-b5fb-77c0-cb19-caa67365d724']
|
Dear all,
Setting: we consider a MILP with both continuous and 0-1 variables. The LP
runs for small horizons. For larger horizons it becomes more and more
unsolvable. From a heuristic we can derive a reasonable solution for all
cases, and we want to see how to set this solution as an initial basis in
lp_solve. The question is how to do this exactly. We use Matlab to talk to
lp_solve.
Looking at the optimal basis from a solution (using get_basis), we guessed
an approach. Can somebody comment whether the following approach is correct
/ can be improved:
. Use the heuristic to solve the model, and take x_heuristic (the
decision variables)
. Calculate A * x_heuristic to see which bounds are tight from the
constraints (here A is the matrix representing linear constraints). Their
rowpositions in A enter the basis V as a negative value (gives numbers
between -1 and -number of constraints)
. See which decision variables are at their lower or upper bound.
Their positions enter the basis V (but we add/substract number of
constraints to make the absolute value bigger than number of constraints).
We use a negative value for decision variables at their lower bound, and
positive values for decision variables at their upper bound
. Probably the 0-1 variables will always be in the vector V
. If the basis is not full enough we randomly add some numbers
. Use mxlpsolve('set_basis',lp,V,0) in lp_solve.m
. We assume the order in the vector V does not matter
Your comments are welcome!
regards <PERSON>
|
708355c1-8eb9-04fe-1a72-167e14236daa
|
['11c1e44f-b5fb-77c0-cb19-caa67365d724']
|
Dear all,
We have successfully installed lpsolve on Windows 32 and 64-bit system to be called from Matlab. The problem is to get the lpsolve Matlab connection functioning under Linux. We use the following setting: Windows 7, 64-bit system, running Linux Ubuntu under VMware. Matlab 2009a
Below are a number of things we have tried so far. Do you have any suggestions?
regards <PERSON>
|
025ab242-6a52-2b39-e61c-c9518b9528da
|
['11c4bdcc-0f2f-2d83-1c49-c5611e6c835e']
|
Hi all,
Is there any such thing as a Linux-based log viewer that can read
Windows NT event logs?
I need to read the *.evt files from the hard drive of a server that
has long been taken out of the network ever since our office went into
an all-Linux configuration.
I can't boot up the original NT machine because all the other parts
went into the Linux servers, and I can't afford to build another
server just for this purpose.
I just want to read from the *.evt files themselves.
Thanks in advance!
<PERSON>
|
d80d2718-5d68-28bb-9fd8-a8a249533e72
|
['11c4bdcc-0f2f-2d83-1c49-c5611e6c835e']
|
Hi to everyone!
I have installed FC4 on an IBM ThinkPad 600E and everything works well.
The NIC I use is a Xircom REM56G-100, which also works properly.
My problem arises when I upgrade my kernel to the latest
(2.6.15-1.1833_FC4), using either yum or up2date, wherein my machine
becomes unable to connect to other computers.
The Xircom card remains detected by the system under the new kernel.
I can ping the local machine, but not the others on the network, not
even the gateway machine.
When I boot up with the default kernel that came with the FC4 install
CDs, everything works again. It is only with the newer kernels that
my connectivity breaks.
Can anyone please help me on this?
Thanks in advance!
<PERSON>
|
18d97cc7-9bf1-1c04-03f6-716be68e71b9
|
['11cd6f4d-1393-dc23-eb12-8b562c99ab2b']
|
The new release (v4) of the M7 has an option to use struts when it is
generating code. I am evaluating it for possible use and wanted to know if
anyone had any experiences with it either positive or negative.
I _know_ I should code like a man and just use a text editor to write my
code; but I'm still looking at it anyway. ;-)
advTHANKSance
<PERSON>
|
4aad7aa7-e7a3-d226-8467-8f9972637d15
|
['11cd6f4d-1393-dc23-eb12-8b562c99ab2b']
|
When validating a currently valid CSS2 stylesheet as CSS3, the following
erroneous error is reported: "background-colortransparent is not a color
value : transparent"
However, http://www.w3.org/TR/css3-background/ specifically states that:
"Note that the keyword 'transparent' was mentioned explicitly as a valid
value in CSS2. It is still valid, but it is now implied by the <color>
type."
Thank you for the consideration. I do not regularly subscribe to this list
so if someone could let me know when this bug is resolved, I would greatly
appreciate it.
Regards,
<PERSON>
|
a5cee12c-7301-afd7-0415-c60e86775a25
|
['11ea9cce-edef-abcd-53a0-11b2a46e09d5']
|
I have a system without an optical drive, that I want to install
Fedora 7 on. In the past I have done the hack to get grub to boot the
installation media off of a file on one of the systems partitions. Now
that there is a live image, I would like to test the system with the
new release before permanently installing it.
My hope is that there is an easy way to book directly off of the iso
image from grub. It seems that this shouldn't be too conceptually
different from booting off of a USB drive, but perhaps I am
simplifying things.
So, how can I boot the live iso image on one of my file systems from grub?
Thanks in advance.
-Schlaegel
|
b200b4ba-6f0c-c769-b3f1-f1c5da78d3f4
|
['11ea9cce-edef-abcd-53a0-11b2a46e09d5']
|
I recently switched from Thuderbird to evolution. I have since been
diligently flagging all of the spam I get, but to no avail.
I am simply running the evolution rpms available from fedora.
The spam I flag seems to permanently reside in the junk folder, but
new spam does not seem to automatically get flagged. Also, there seems
to be no way to automatically have the junk folder clean itself out.
So, (1) am I missing something to turn on automatic junk/spam
filtering, and (2) is there a reason to have evolution keep spam
sitting in my junk folder?
-Schlaegel
|
28f0e304-c19b-e642-9b17-350095eab560
|
['120c2194-4eb2-7b7b-5e0b-4a6b97e35a35']
|
All,
I?ve been receiving and answering queries to info@tcwug for a while, and the
time has come to pass it along. The address receives aprox. 4-5 messages a
month; mostly from people asking about who can attend meetings, other groups
looking for info about activities, and the occasional press inquiry.
Perhaps someone with a more regular attendance at the meetings could be
responsible for the account?
Please post to the list and/or contact me directly if you?re able to take up
this task. If there are multiple interested parties, we?ll figure something
out.
B
|
e58576e3-d26a-1984-5e1f-a1372e193232
|
['120c2194-4eb2-7b7b-5e0b-4a6b97e35a35']
|
The July meeting is next week. If we have the same numbers as June, I?ll
find a bigger space for August! Come on people, let?s stuff that back room!
If anyone has a particular topic they would like to talk about at the
meeting, post to the list or email me directly; I?ll put together an agenda.
Otherwise, we?ll cover the usual: Loring Park, overlay networks, new
business, etc, and then we?ll open the floor for wild and free ranging
discussion!!!
Next meeting: Tuesday, July 8, 6:00 to 8:00 pm
Dunn Bros
201 3rd Avenue
Minneapolis, MN 55401
<PHONE_NUMBER>
(on the same block as the Milwaukee Road Depot hotel and skating rink)
|
ee6701f3-097a-8a45-65ba-2c1f9202f3d6
|
['1211c5cc-a817-949d-ae18-04b0d618bb6a']
|
Hello,
I wanted to get some guidelines on how other people are controlling their syslogs with regards to I/O performance on the database side.
I am running php-syslog-ng on a separate webserver and it takes a very long time to do a search and return the results. Long time meaning 30 to 60 minutes or even longer as the logs grow. I have indexed the database by message, but it did not help. The I/O on the database server is just unmanageable.
Possibilities that I'm looking into are getting 15K hard drives, change the RAID from 5 to 3, add more memory the controller's cache.
Thanks,
<PERSON>
|
b97f4185-e962-4acb-2b4f-c8cdb0c08e66
|
['1211c5cc-a817-949d-ae18-04b0d618bb6a']
|
Is anyone having inconsistent results with the www.imfstatistics.org site?
After proxying to the www.imfstatistics.org site, I get inconsistent results when clicking on the BOP link at the top right side of the page.
I am able to access the link when on campus and using Firefox, but if I use IE I get a message saying the page cannot be displayed. It also works with Opera from on campus.
Off campus, using Firefox, I get prompted to log in to their site and with IE I again get page cannot be displayed.
I spoke with their support and they said the only configuration you need in ezproxy is:
Host www.imfstatistics.org
That is exactly what I have, but I also have www.imf.org.
Is anyone else experiencing the same issues?
Thanks
|
4ab007cc-0e1b-99c8-92c1-a76c37dd2ef8
|
['1214f996-d56c-aa77-a25e-de96b6d969c1']
|
I'm sure this is obvious to established users of Datebk 5.0, but I
have done a quick search of the manual/user group and can't figure
this out.
What does it mean when a blinking light appears in the upper left
corner of the Day View screen? I assume this is referencing an
alarm, though clicking on the blinking light doesn't yield any
information as to where the alarm is. Since I have a number of
items on any given day, some timed, some untimed, am I to check each
one to find the alarm?
<PERSON>
|
2628b7d9-1707-2926-bf57-f35b119517d2
|
['1214f996-d56c-aa77-a25e-de96b6d969c1']
|
1. I am running DateBK5 V-5.1a, s1 on a Tungsten E. I have followed
and searched some of the discussions on this board re: conduit
problems (as well as read Pimlico's FAQs), but can't find an answer
to my question.
Why on the Palm Desktop, does data appear on former days, even when
it has been deleted from Datebook and does not appear there? I am
not running any other programs or enhancements to Datebook, and my
Desktop Synch settings are set to the default: "Synchronize the
files."
2. When I first click on a Datebook entry on the Palm, I get the
following error message: "Unable to open Memo DB?!" I realize one
of my memo entries related to Datebook must be corrupted, but how do
I know which one (I have a couple hundred). I ran "dbscan" on the
Palm--and it deleted a few "corrupt" files--but the problem remains.
Thanks for any help some Datebk whiz can offer.
<PERSON>
|
d6788825-594d-d933-a283-4ee8abbad461
|
['1218ef04-34ff-a1c5-c745-2493244962d1']
|
Does anyone have any experience with putting entire TEI records in a
METS wrapper (rather than linking a METS file to a TEI file)?
For a test, I went ahead and combined 2 completely valid files:
* METS, item-level record that described a digitized letter
* TEI P5 transcription of that letter
However, when I tried to re-validate the combined document with Oxygen,
no matter what I tried, I'd always get one type of error:
"Attribute xml:id is not allowed..."
I had already been thinking about replacing the xml:id's with the "key"
attribute (which will validate), and then paring down the teiHeader if
we actually did combine these sorts of documents, but I was still
perplexed as to why this was happening. I've tried messing around with
the METs schema as well, but I'm definitely not a schema expert.
Any hints, warnings, answers, etc. are appreciated.
<PERSON>
|
86abcaa1-035c-1052-c581-cda1bf34d3e5
|
['1218ef04-34ff-a1c5-c745-2493244962d1']
|
I'm curious if anyone on the list has experience with adding their EAD documents into a larger discovery system?
Here are two examples of what I mean:
* Triangle Research Library Network now indexes (and displays) entire EAD documents.
Example (in which I've restricted my results to "archival materials" and entered "ammons" as my keyword):
http://search.trln.org/search?Nty=1&Ntk=Keyword&Ntt=ammons&N=200092
* University of Chicago library's implementation of AquaBrowser seems to index entire EAD documents.
Example (in which I've searched for "American Automobile Brief History", quotes included, and where the first 3 results returned should be for archival finding aids):
http://lens.lib.uchicago.edu/?q=%22american%20automobile%20brief%20history%22
So, this leads me to three questions in particular:
1. Can anyone point me to any other online examples of "discovery tools" that are ingesting entire EAD documents? Summon, Encore, Primo, Blacklight, etc.??? (but, again, I'm not asking about OPACS that only search a surrogate of the EAD)
2. For those of you that are including the entire EAD in your library's discovery tool, did you already have surrogate MARC records for those collections in your catalog? If so, how are you dealing with those now that you're adding the EAD?
3. What do you think of whole retrieval experience (advanced search options, facets, incorporation into the relevancy algorithm, etc.)?
Thanks in advance for any and all advice and/or other examples that might be out there,
<PERSON>
|
ce7d3230-f231-8246-4065-8643ba054d05
|
['121c2a43-2985-eedd-9d53-b1b8a05a816a']
|
HP Deskjet 930
12ppm black/10ppm color, 2400x1200dpi w/photo paper. This photo-quality printer
delivers high print quality on everything from text on plain paper to images
on photographic paper. The DeskJet 940C features HP's Enhanced Color Layering
Technology as well as HP's ColorSmart III technology, USB capability and 2400dpi
mode. Features: Printer Type: Color DeskJet Resolution: Up to 2400x1200dpi
Print Speed: 12ppm black, 10ppm color Memory: 2MB RAM Paper Capacity: Up to
150 sheets System Compatibility: Mac and Windows 95/98/2000/Me/XP Interface:
USB, parallel Printer Language: HP PCL level 3 enhanced Warranty: HP Refurbished,
1 year HP Warranty C6427AR - $98.00
SEAGATE
ST318203LC - NEW Seagate 18GB SCSI Drive $172.00
This e-mail is only intended for wholesale or distributors only. Please call
for quantity discounts.
Supplies Club, Inc.
Tel: (619) 218-7400
Fax: (858) 653-0339
E-mail: <EMAIL_ADDRESS><PHONE_NUMBER>
Fax: <PHONE_NUMBER>
E-mail: Lv3gHdzA4pTvCGMT@example.com
http://www.suppliesclub.com
|
64bacfc6-10f5-64eb-d0d5-494eeb8ff40c
|
['121c2a43-2985-eedd-9d53-b1b8a05a816a']
|
KDS 671DP With 1 GHz Pentium III, 256 MB SDRAM, DVD and Windows XP Pro OS
Compare this terrific value with any other notebook PC under $1000. It features
a powerful Pentium III processor and a large 14.1-inch screen, plus the latest
Windows XP Professional operating system. There's a LAN port for high-speed
Internet access, and you can even watch movies on the built-in DVD drive.
Model No. KN-671DP
Manufacturer Korea Data Systems
|
8dc4a5b5-5403-ffd6-99d7-04676f52ecb5
|
['121ca720-f8b3-2564-aa3c-f1caa64af3e5']
|
Hello,
I've added the command line -S option to the blenderplayer so it'll
run python sandboxed.
No global variables. What I did was to change the constructor for
the GPG_Application class and to add a property (TPythonSecurityLevel
pythonSecurityLevel) to it.
By default the security level is psl_Lowest, but when called with -S
it becomes psl_Highest.
I've implemented it against the apricot branch (as it's the one I'm
using in the plugin developent right now because I need to make a tech
demo). Can I submit a patch against this branch or should I implement it
again against the trunk before submitting the patch?
Working with this branch is our favorite way, but I think we can
send patches against the trunk.
Anyways, I hope I can attend to this Sunday 's meeting.
Best wishes.
|
eda3cbf3-ba1e-12c1-ff6a-54e63b0c15d5
|
['121ca720-f8b3-2564-aa3c-f1caa64af3e5']
|
Hello all,
Something occurred to me right about now.
The original problem with the Firefox Blender Web Plug-in is that
there was a dirty lock for rendering with OpenGl in the plugin Window.
That's solved with xembed. What just occurred to be is that, with
xembed, there is no real need for forking the process.
Even though forking the process gives us more stability, as if
blender crashes the browser keeps going, it's a lot slower than threads
(simply because for each plugin instance there will be needed to
initialize the entire game engine - load the engine code into the memory
and running it's main - and harder to script - even using dbus.
If we work with threads that's solved. And we also gain something
that's quite important: the ActiveX plugin work with threads and there
is no locking in the opengl context (there is a data locking for
something I didn't quite understand yet, but I've seen some examples
over the web where people render OpenGL into the control's window
without locking anything!
We could have then a common code in both web plugins. But there is
also another problem. The game player uses some global variables (I know
only about one, the G variable - which has gave me some headaches in the
past plugin code), so refactoring is needed in order to implement this
approach. But, once it's achieved we'd have a code that's easier to
maintain - as the plugin and the stand alone player would be different
applications, sharing a great part of the code.
Those are only initial thoughts. I might come up with some testing
code so I can make sure it'll work as expected. :)
Regards,
Marcelo Coraça de Freitas
|
fc71043c-93f0-8671-dbed-d5154e047eeb
|
['12239a2b-84b4-a8af-384d-9919010b8caf']
|
Hi <PERSON>,
I'm asking if and when do you plan to update the milestone update
site /downloads/eclipse/updates/3.3milestones with one of the newest
milestones (RC3, ...) or is there a connection between the Europa update site
builds and this one? Currently it contains only the features from the RC2
build.
I need to pull some features (in particular the org.eclipse.sdk) from that
site.xml for the EPP builds. Right now I'm thinking about which platform
version to choose for our next EPP package build, but I can only include
something that is available from an update site.
(downloads/eclipse/testUpdates is not an option for us)
Thanks and regards,
<PERSON>
|
971ca10d-4a8d-8300-4637-f7748a4feb83
|
['12239a2b-84b4-a8af-384d-9919010b8caf']
|
Hi *,
I tried to use p2 with the linux-64 platform download (*not* SDK!) and got the
following error message:
'Cannot launch the Update UI. This installation has not been configured
properly for Software Updates.'
Are there any known build errors, or what needs to be done to use p2 from
within the platform build?
Having an enabled and working p2 in the base platform download would be a very
good step towards an integration of p2 in all the EPP packages. Which means:
Yes, this would be an important feature!
Thanks
<PERSON>
|
040b55d0-e0bd-00fc-a5fe-fe8564750b0f
|
['123c35a4-4c07-ea16-9a40-5c7812363b1d']
|
Hello,
can come help me find out how do i use any of the logic controllers or other
controllers so that I send a request after certain response is received from
the server.
example: When the client connects to the server the server sends some
response immediately. The client has to send the next request after the
complete response is received form the server. So i need a controller which
checks the last line of the response (which is always the same) and sends
the next request after the response is obtained.
Thanks in advance
|
6baa28cc-73ee-8839-cecf-12e188b9ad5a
|
['123c35a4-4c07-ea16-9a40-5c7812363b1d']
|
Hello,
I want to load test my Web application in which user logs in and uses its
functions. I want to load test the functions of the application after users
logs in.
I have a loop count of 10 for my test but i need jmeter to send the HTTP
request to login only once and after logging in i want the jmeter to use the
loop count for rest of the HTTp request Is this possible?
Hope i made myself clear.
Thank you.
|
89c57fe0-4ce6-9ff6-079c-1f8a72f923bf
|
['123ca5d6-9d77-b726-68a8-361bde870342']
|
Hi!
I'm wondering what the date/time picker controls in the log view are used for.
For example, I need to revise several changes that occurred around November
of last year. For that, I tried to select October 2009 as start of the range
and December as end, but the log window didn't let me. The only thing I was
able to change was the end of the timespan or the beginning using the "Next
100" button.
Is this intentional? Why? And what is the intended use of the two controls?
<PERSON>
|
847fade4-3b1f-c3e5-e184-a8b66e5bcf6a
|
['123ca5d6-9d77-b726-68a8-361bde870342']
|
Hi!
I have following scenario:
Three branches of a tree, the second was created from the first and the third
from the second. Now, I made a bugfix in the second branch. I then merge this
revision into branches one and three.
What confuses me now is that the merge in the third branch marked pretty much
every single file in the working copy as modified, even though it is just a
single one that changed. In branch one, and that confuses me even more, this
is _not_ done, it only marks the file plus the directory where the file is in
as modified.
I'm using TSVN 1.5.8 on a 32-bit system.
Can anyone help me understand what is happening there?
Thanks!
<PERSON>
|
b8f9fa47-ffb4-95fb-81ce-b70534658402
|
['1244b1b5-8ef8-df01-1282-91e86d8e322c']
|
Hello,
I am running ecasound-2.4.4-cvs-20051021 and just noticed a new and
possibly unintended behavior which seems to have been recently
introduced.
Basically, if (under interactive mode or with an api) I add a cop with
two controllers (ctrl) and then remove the cop, one of the controllers
is orphaned. I am somewhat certain that previously, when a cop was
removed, all it's attached controllers were removed along with it.
That fact that only one controller now remains instead of neither or
both leads me to think this is an unintended behavior.
Once the controller is orphaned, ecasound continues to run if no
further command is issued. Depending on what command is issued next,
however, there is typically an uncontrolled exiting of the program
(sometimes a segfault, sometimes a broken pipe, and sometimes an
apparently clean but unannounced exit).
Now that I think about it, I have only tested this with 2x -km, not
sure if the same thing happens with other controllers.
I would be happy to provide more details as needed.
<PERSON>
|
5a5af62a-d980-75aa-3842-931584ff1171
|
['1244b1b5-8ef8-df01-1282-91e86d8e322c']
|
Hi <PERSON>,
I'm using the C ECI with Ecasound 2.3.0 and I discovered what I thought
was an incorrect behavior with last_float() and copp-get, though I may
well be the incorrect one here. Working around it was really simple and
this probably affects close to null users, but you wanted bug reports...
;-)
For the case in question, I was calling a copp-get, then a copp-select,
then a last_float(), which wasn't returning the correct value. The easy
way around that was to call the last_float() in between (ie right after
copp-get, before copp-select), which worked correctly.
The theoretical problem is that since copp-select is supposed to lack a
return value, the last_float() should (in this case) obtain the value
from the last copp-get, even when a copp-select has been called in the
meantime.
I hope I'm making some sense, depsite my convoluted explanation. I
thought this may extend to other similar command sequences as well.
<PERSON>
|
b92b7c8f-048f-bfe7-bbc6-14c1c3e423a6
|
['1245ff9c-683f-4768-0c6f-7821ec68ae1d']
|
Hi,
I have installed XStandard editing functionality in our website.
However, when editing XHTML content with xstandard (which works) we have
no access to the internal site's pages when we try to install a
hyperlink within the XHTML document. We can add a URL's manually, but
can not select a site internal page from the content tree as used in the
normal link function.
When I implement a wiki, xstandard offers a tree of site-internal pages
which can be linked.
Can anybody help please ? Do we need to initialize xstandard with the
content tree of that website ?
Kind regards
R. <PERSON>
|
f2931120-6a97-4574-531a-af61be4e9910
|
['1245ff9c-683f-4768-0c6f-7821ec68ae1d']
|
Hi everybody,
We are using ZMS and Zope for various clinical websites.
Usually we select one of the included templates and make changes
concerning the layout.
So we end in a mix of content and layout information.
There is the possibility to select a template when you add a zms website
within zope.
My question is:
Is there a possibility to change to a different template when the
website is under construction or finished ? I would like to use some of
the prewritten content in a congress website and just change to a
different template for next years congress. Is there a template changer
? As I did not find one - is there a way to do that by hand ? Is there a
way to export a website layout to a template and reuse it in future (I
guess there must be one ...)
Kind regards
<PERSON>
|
aa99cdc0-2169-2404-f167-df6e51691e0e
|
['125553b6-5524-cd9d-9c76-bbfb72ab3250']
|
Hello. This is my first post so please let me know if I'm doing
something wrong.
Anyway. Does anyone have a homemade-patch or anything to make grsecurity
work for 2.0.7 (2.6.11.12) in a domU (dom0 would be nice too).
It's right now the only thing stopping me from taking the step to using
Xen in a "live enviroment".
Sincerely, <PERSON><IP_ADDRESS>) in a domU (dom0 would be nice too).
It's right now the only thing stopping me from taking the step to using
Xen in a "live enviroment".
Sincerely, Sebastian H
|
1f13381d-8293-89c5-6d2f-1a7c7fb606bb
|
['125553b6-5524-cd9d-9c76-bbfb72ab3250']
|
Hi
This might come as an odd request but as I'm not good with C and there's
nice people out there I'll give it a shot.
I'm looking at doing per-packet load-balancing based on the
source-address. That is, for every packet that goes out the source
address should be new.
First I tried doing this with iproute2 or netfilter but there's really
no good way to do this in Linux. Atleast not that me and my friends found.
So then I thought that I could do the per-packet balancing in the
application instead when using UDP in OpenVPN:
Basically what I want, and this can be statically written in the code,
is a list of IPs that OpenVPN chooses from for every packet.
I think this should be fairly easy to do and there shouldn't be many
lines of code. If I understood correctly it can be done under the
resolve_bind_local function in socket.c.
Is there anyone who can help me with this task? It would be very
appriciated!
Sincerely,
<PERSON>
|
e639f620-4c02-c2aa-57ce-95864fd35379
|
['12681c41-182d-02b7-3489-7729c4a640a1']
|
Hi,
I am running 2 jxta programs: 1 is publishing a newly created pipe adv.
the other is searching for this adv.
When I run these programs with using "LAN discovery", eg jxta
configuration set to : use a relay=true, broadcast=true,enable incoming
connections=false
all runs perfeclty and the adv is found.
However when I run it using the public network, eg jxta configuration
set to : use a relay=true, broadcast=false,enable incoming connections=false
It takes hours for the adv to be found.
Hoping that a group will reduce the discovery duration I defined a
group. Both programs join this group and the adv is published within the
group.
However it now takes even longer for the peers and for the pipe adv to
be found.
Is there any way to speed up the adv discovery ?
Rgds
Ron
|
17238453-57c3-c3bd-7dae-7cd67fd40613
|
['12681c41-182d-02b7-3489-7729c4a640a1']
|
<PERSON>,
sorry for the delayed answer and thanks for your fast response.
I am quite busy lately and have not had the time to check your new version.
I have however patched the class, so that it works for me.
Attached is a copy of my code.
You will note that I have added a method getFileOptions(String file) since getting the options has to be done multiple times.
I have also been having problems with VSF: calling fsManager.resolveName(new File("."), "http://somewhere.com/somefile") results in an Exception due to a bug in VFS. A similar bug, in the method which cleansup file names and removes multiple "/" returns "http:/somewhere.com/somefile", which is obviously wrong, has been reported on the VFS issue tracker in 2008, but has not been resolved yet.
fsManager.resolveFile(...) however works as expected and I therefore changed the code to use resolveFile instead of resolveName, wherever it was required for my application.
<PERSON>
|
20b28c8c-fbb8-b1c5-bf17-f5ca14151e06
|
['12690f04-7ca5-9489-df41-f53c8669390a']
|
This is undoubtedly a 'routing 101' question, but apparently I need to go back
to school. I have a debian machine acting as your typical 'small email/web
server/nat gateway'. The only slightly unusual thing is that I'm adding a
second private nework. A local (across the street) eatery wants to add free
wireless and I want free meals. We have the whole setup in place, with the
extra nic installed, the wireless can in place, and it works. However, I
*don't* want traffic from 192.168.1.x (the cafe) to be routed to 10.0.0.x (my
lan), just out through my broadband connection. How do I do that?
Thanks!
<PERSON>
|
b41bf256-c582-838d-5a7d-256052d90e74
|
['12690f04-7ca5-9489-df41-f53c8669390a']
|
I found out this morning that using the web interface to retrain fps or
fns isn't working quite right. If I use the checkbox on multiple mails
(or even a single one), then click Retrain Checked, then the spam will
be retrained (according to dspam_stats and the debug log) but the
refreshed web interface doesn't reflect that. It still shows the
original status. However, if you click on the url next to the checkbox
("As Innocent", or "As Spam") the it retrains the email *and* the web
interface reflects that. Now, refreshing/reloading the webpage doesn't
do anything, and I've even completly closed my browser and reopened it,
to no avail.
Any idea what's going on?
<PERSON>
|
9543f00b-f8a6-1e4e-c6c2-d41ce8910cf2
|
['126a4b83-08ee-0ad3-46cb-7ecdef9a0e41']
|
I've explored my audio/video sync problem a bit further since my last
post. Here is my situation:
I use a Hauppauge PVR250 to capture straight to MPEG2 files. Not the
best way to go but it's what I've got and I want to make it work. The
reason I got this card is that it contains the audio as well as the
video capture device. Using previous BT chip based capture boards and a
separate sound card always resulted in sync problems. The PVR250 solved
that for me.
Anyway, I've been using it to capture various video sources and have
discovered that Cinelerra doesn't seem to like the MPEG2 files that it
produces when I use a simple 'cat /dev/video > myfile.mpg'. My board is
set to capture at a 9.6 M bitrate (to be compatible with the DVD max)
and the capture size is 720x480 for the same reason. However, I've
noticed that when I pull these files into Cinelerra, the audio is always
out of sync with the video.
As a workaround I started using ffmpeg to split the .mpg file into a
quicktime .mov file and a .wav audio file. When I pull these in sync is
just fine. So tonight I decided to just take the .wav file and load it
in with the original .mpg file's video and it's STILL out of sync. So I
then load the original .mpg file with it's original audio and see that
both the .wav audio and the .mpg audio are in perfect sync. The culprit
appears to be the .mpg file's video data. It runs slightly faster than
the audio and the track is therefore shorter. Knowing this I guess the
problem has something to do with the way my captured MPEG2 files are
read in by Cinelerra. This appears to be the case with both mainline
Cinelerra and CinCVS.
This also made me aware of another problem. The split out .mov video
file when read in by <PERSON> seems to shift the video to the right by
a good number of pixels. I'd have to guess at least 96 to 128 pixels to
the right. In addition it chops off about the same number of pixels on
the right side of the video resulting in an unnatural crop cutting off
the right and completely shifting the video to the right. This doesn't
happen with the video track from the .mpg file that the .mov was created
from.
Are these known bugs?
Thanks,
<PERSON>
|
56667886-6680-659e-587f-255d38f09639
|
['126a4b83-08ee-0ad3-46cb-7ecdef9a0e41']
|
Over the past week I've worked on getting all of my systems up to the
latest version of Cinelerra from cvs.cinelerra.org. I am currently
running it on the following systems:
1. A Celeron (P4 family) 2.4 GHz box with 512 Megs or RAM running Fedora
Core 3
2. A Pentium 4 (HT) 2.6 GHz box with 1 gig of RAM running Gentoo 2005.1
3. A Pentium M 1.7 GHz latop with 512 Megs or RAM running Fedora Core 3
With every MPEG (1 or 2) file that I open the video is always shorter
than the audio track. Whether it's a capture done with my PVR250 board,
a video created on my Sony Mavica digital camera or a transcoded file
created with ffmpeg, the problem can be easily reproduced. All I have
to do is open the file and drag it onto the timeline view, then magnify
at the end of the tracks and the audio always last many minutes longer
than the video. Since I'm new here I'm not sure if this is the right
place to post things like this. If not, let me know where I should
post. Also, if there is a resource that I can use to see if there is
already a bug report for this issue and it's status, please let me
know. I don't want to annoy anyone, but I want to get some answers and
hopefully participate in solving some problems. :)
Thanks,
<PERSON>
|
078f4d30-074d-6813-3efc-0de67d8b735a
|
['1273cd7a-a8d2-46a0-fe5c-5b93a106fc53']
|
hai everybody,
i am a new programmer to ns-2. I
executed some example tcl scripts.while executing i
got segmentation fault. I don't know what it means. i
will be thankful if any of u tell me about this and
how to overcome this.
with regards,
sridhar
|
53e882bc-5467-faa2-c07b-2388c9235879
|
['1273cd7a-a8d2-46a0-fe5c-5b93a106fc53']
|
hello friends,
i have a problem & hope some one
could help me. I am new to this ns-2.Anyhow i
installed ns-2 successfully.
My problem now is ,I want to implement a new
protocol in ns-2. I studied the ns-manual. but it is
very confusing for me.
One thing i want u people to make clear is ,
whether i have to start coding in c++ or tcl
scripting. should I implement that protocol in c++ and
then in ns-2.
so what i want from u is a detailed
procedure to follow to implement a protocol.
thanking u,
with regards,
sridhar.
|
96dfce5a-e851-0a96-ffac-eb9bba4a455d
|
['1283d60b-ef5d-d1d9-fe5a-32012203d59f']
|
Thanks for the quick response. However I still have two questions -
1. Are we saying that we insert all user objects in the working memory
alogn with the Event that arrives at runtime in the memory? What is the
volume of data that the rules engine can handle in terms of these users in
working memory?
2. I am still confused if I donot use a rules engine (I dont have any work
flows nor any complex logic), how can I have a dynamic way of doing this?
Please remember that I can have one subscribed alert which says alert me
when balance in account < 1000 other can say alert me when report A is
available.
Writing custome code around them would require adding this custom code
every time a new subscription requirement arrives..
Would appreciate any inputs on the same.
thanks
Shikha
|
d810f81a-bf0b-a60d-e731-3118c90bfa8a
|
['1283d60b-ef5d-d1d9-fe5a-32012203d59f']
|
Hi,
I am looking to use drools where I can have users subscribed to specific
alerts. Hence for example -
I can have a rule like ->
Rule 1 -> amount < {amount}
Where {amount} is the value which the user defines at the time of
subscribing, hence the user wants to recieve an alert when the amount in
his account < {amount} that he just subscribed to.
I was trying to use the DROOLS template feature and was even able to
succesfully execute this specific scenario. The use case I was executing
is, when an event of type Rule 1 occurs , I get all users who are
subscribed to rule 1, and then create a drl file for all of those users
with there custom data substituted as part of {amount}. Now I fire the
rules(note I have multiple rules one for each user} which executes for
this specific event and gives the required results(The above example is
just a sample example). My area of concerns are -
1. Is Rule engine really the platform I am looking at? As I dont have any
complex logic , I just want to use some component which can evaluate my
Events that arrive with different subscription rules?
2. If I regenearte the drl file every time an event arrives (I need to
because every time a iff type of rule can fire and the list of subscribers
can be different as well), this would have a performace impact as the
rules are compiled and generated every time and not really cached?
Please let me know if the problem is not clear. Any help/inputs in this
regard would be highly appreciated.
Thanks
<PERSON>
|
245d8969-87b8-b185-0b39-7ff6eb070db0
|
['1295aba0-8e36-e913-9107-92a12d7b2780']
|
Hi,
I'm trying to run MS-Office under wine. As lang as I'm running the
applications from ${HOME}/.wine everything is working to my liking. But
when I try to put the .wine-directory to an other place I get problems with
Powerpoint.
I tested a lot to get Word and Excel running when installed in a read-only
directory. I used some symbolic links to place files and directories, which
need to be writeable, in adequate palces (some where in ${HOME}). Currently
the installation is working fine for Word and Excel. But when I try tp open
a Powerpoint presentation (via the file open dialog) wine hangs with the
following message (repeated continously):
err:syslevel:_EnterSysLevel (0x6a756f60, level 2): Holding 0x2e9ec8c0,
level 3. Expect deadlock!
Opening the presentation via commandline is working fine.
I tried to figure out, if there are still problems with file permissons and
straced wine (strace -f -e trace=open ${WINE} ...). Nothing suspicious!
EXCEPT: Powerpoint does not hang! It still leads to tons of the deadlock
message (see above). Even just moving the mouse inside of Powerpoint
produces these messages. But its still reacting.
Does anyone have experience with "central" installations of MS-Office or
those deadlock messages. Any hint may help.
Thanks a lot for your attention.
<PERSON>
|
3e976c4b-aba2-78c8-2ca9-c5f4939eafc6
|
['1295aba0-8e36-e913-9107-92a12d7b2780']
|
Hi,
please excuse my newbie questions, but this MS-Office...
When I run MS-Word 2000 and open more than one document in parallel, the
menu bar and the tool bar no longer react on mouse events. Most operations
can be reached by the corresponding key stroke (Alt+<Key>); but not the
window menu. The tool bar is unreachable. Only the word-window opened as
first of all reacts on mouse events in menu bar and tool bar.
And worse: Even if I first select an other menu and reach the window menu
by using the cursor-keys, it is not possible to switch between the
diffenrent documents. No matter in which window I try it.
Does anyboy have an idea who to fix this "feature"? I tested the following
WINE releases: 20040719 and 20041019.
Thanks in advance.
Thomas Serries
|
eff82b1c-a194-8083-9515-6cec85d172f8
|
['129c6ed3-ffdd-091d-6d84-5082f876e568']
|
Hey folks,
I had a situation recently that our network went down
and our Network Monitoring software did not notify us that the network
was down because the internet connection went down. We had a problem
with our carrier where they messed up on our /23(where our Network
Monitoring software resides), when they did a maintenance. What
transpired is our /23 was no longer routing to us. Is there a free ping
internet service, or something that we can pay a company that just sends
a ping to devices? If they fail to respond, then an email is sent to
us? Thank you folks.
M.A.R
|
862b74ef-1161-713f-12af-bc310447cf46
|
['129c6ed3-ffdd-091d-6d84-5082f876e568']
|
Ok here we go. I know the subject is a little ambiguous, please allow to explain.
I have a network of 192.168.1.0/24 and I need it to reach a network 10.0.1.0/27 only when it needs to be accessed by specific machines that reside on the 192.168.1.0/24 network.
192.168.1.10 à NAT à10.0.1.10 à route that packet to 10.0.1.1.
I only want specific host to route to that specific /27 network .
Any help would be appreciated. So far what I have gathered is only for VPN connections but I do not want to build a VPN. Thank you again in advance.
<PERSON><IP_ADDRESS>/24 and I need it to reach a network <IP_ADDRESS>/27 only when it needs to be accessed by specific machines that reside on the <IP_ADDRESS>/24 network.
<IP_ADDRESS> à NAT à10.0.1.10 à route that packet to <IP_ADDRESS><PHONE_NUMBER> and I need it to reach a network 10.0.1.0/27 only when it needs to be accessed by specific machines that reside on the <PHONE_NUMBER> network.
192.168.1.10 à NAT à10.0.1.10 à route that packet to 10.0.1.1.
I only want specific host to route to that specific /27 network .
Any help would be appreciated. So far what I have gathered is only for VPN connections but I do not want to build a VPN. Thank you again in advance.
Michael Ruiz
|
42381ee7-1e6a-b4e9-402e-75da36eef830
|
['12a3617d-093a-fc4c-59f8-e7f3348dc39d']
|
From Mrs.<PERSON>.
Hello My Dear friend,
Forgive my indignation if this message comes to you as a surprise and may
offend your personality for contacting you
without your prior consent and writing through this channel.I got your
contact from searching for a reliable and honest person that will assist me
safeguard fund .divinely inspired to pick your name among other names after
series of prayers and fasting for Gods direction.
I am Mrs.<PERSON>. person from Colombia undergoing medical
treatment. I was married to Dr. <PERSON> who worked with Malaysia
embassy in South Africa for nine years before he died in the year 2000.We
were married for twenty years without a child. He died after a brief illness
that lasted for only four days. Before his death we were both born again
Christians. Since his death I decided not to re-marry or get a child outside
my matrimonial home.When my late husband was alive he deposited the sum of
$10.6 (Ten Million six hundred thousand U.S.Dollars)with one
finance/security company in EUROPE.Presently,this money is still with the
Security Company.
Recently,my Doctor told me that I have six months to live as I am terminally
ill with cancer.Though what disturbs me most is my partial paralysis. Having
known my condition I decided to donate this fund to a church/mosque or
better still a Christian/Moslem individual or Hurricane Katrina victim that
suvives that will utilize this money the way I am going to instruct here . I
want a church/Mosque or individual that will use this to fund
churches/Mosque, orphanages and widows propagating the word of God and to
ensure that the house of God is maintained.They said blessed is the hand
that giveth. I took this decision because I don't have any child that will
inherit this money and my husband's relatives are not Christians and I don't
want my husband's hard earned money to be mis-used by unbelievers.I don't
want a situation where this money will be used in an ungodl manner,hence the
reason for taking this bold decision. I am not afraid of death hence I know
where I am going. I know that I am going to be in the bossom of God.
If you will be of assistance,I will surely appreciate and reward you for
your kindness in rendering help to a dying woman.
Thanks and God bless,
Till i hear from yousoonest,
|
69f9a252-ce73-1ac1-de5a-88a04d40e9c8
|
['12a3617d-093a-fc4c-59f8-e7f3348dc39d']
|
From Mrs.<PERSON>.
Hello my dear friend,
Forgive my indignation if this message comes to you as a surprise and may
offend your personality for contacting you
without your prior consent and writing through this channel.I got your
contact from searching for a reliable and honest person that will assist me
safeguard fund .divinely inspired to pick your name among other names found
after series of prayers/fasting for Gods direction.
I am Mrs.<PERSON>. person from Colombia undergoing medical
treatment. I was married to Dr. <PERSON> who worked with Malaysia
embassy in South Africa for nine years before he died in the year 2000.We
were married for twenty years without a child. He died after a brief illness
that lasted for only four days. Before his death we were both born again
Christians. Since his death I decided not to re-marry or get a child outside
my matrimonial home.When my late husband was alive he deposited the sum of
$10.6 (Ten Million six hundred thousand U.S.Dollars)with one
finance/security company in EUROPE.Presently,this money is still with the
Security Company.
Recently,my Doctor told me that I have six months to live as I am terminally
ill with cancer.Though what disturbs me most is my partial paralysis. Having
known my condition I decided to donate this fund to a church/mosque or
better still a Christian/Moslem individual that will utilize this money the
way I am going to instruct here in. I want a church/Mosque or individual
that will use this to fund churches/Mosque, orphanages and widows
propagating the word of God or to help me give it out to the katrina
hurricane and to ensure that the house of God is maintained.They said
blessed is the hand that giveth. I took this decision because I don't have
any child that will inherit this money and my husband's relatives are not
Christians and I don't want my husband's hard earned money to be mis-used by
unbelievers.I don't want a situation where this money will be used in an
ungodl manner,hence the reason for taking this bold decision. I am not
afraid of death hence I know where I am going. I know that I am going to be
in the bossom of God.
If you will be of assistance,I will surely appreciate and reward you for
your kindness in rendering help to a dying woman.
Thanks and God bless,
Till i hear from yousoonest,
|
6324df9c-3f20-22bf-f52c-99873ea352bd
|
['12a52ecf-91a3-5bb2-12ad-4306f91a8cdc']
|
Hi,
we had asked the reader of the OO.o Newsletter in a survey which form of
the OO.o Newsletter they prefer and it turned out that almost 84% wanted
to have the newsletter in the HTML format. 2599 readers had participate.
This is a clear quorum to change the format of the newsletter to HTML.
This does not imply that readers who do not prefer HTML can not read the
newsletter anymore. I will send out the newsletter with an embedded text
version.
The October newsletter will be the first newsletter in the HTML format.
Regards
<PERSON>
|
7d9a026c-e965-5859-0afa-6277981262b8
|
['12a52ecf-91a3-5bb2-12ad-4306f91a8cdc']
|
Hi,
as you may know, I am creating the OO.o newsletter in plain text this
keeps the newsletter very slime and has the disadvantage that it looks
rude and out dated. Since almost every other newsletter turned to the
HTML format, it is time to move it to HTML.
Please find attached draft version of newsletter. I am tried to keep it
slim, simple and easily to edit since I do not use a newsletter creation
tool.
If somebody has experiences with newsletter tools, I am open for any
suggestion.
However please review my draft and send me your opinion whether it makes
sense to turn the OO.o newsletter to HTML
Regards
Kay
|
a4f2cac8-c4f2-fb2d-e2cc-7f0cc37927c8
|
['12a9138e-95f3-86b8-6329-486a9d50073a']
|
I dont know exactly if this may be the reason, but, are you running a 64bit
version of Fedora right?
I had some trouble in the past with pharo and Ubuntu 64bits. I needed the 32
bit libraries to run it.
If that is your case try installing the 32 bit libraries.
Just in case you are not quite familiar with installing libraries in Fedora,
here is a guide
http://beginlinux.com/blog/2009/09/installing-32-bit-support-into-64-bit-fedora-11/
Hope it helps
Cheers
|
8fe6f17b-9790-9ac6-f7e6-250e6a461501
|
['12a9138e-95f3-86b8-6329-486a9d50073a']
|
I would really love to, and I promised myself that I will as soon as I make
myself some time.
Unfortunately there still much I would love to test and learn in Pharo
before getting myself dirty. <PERSON>'s blog about VM and Morphic are some of
my pending accounts. So maybe after the winter holidays (Argentina's winter)
if I have some time, i will start doing some more things in Pharo.
Collaborating a little bit on PBE Spanish translation thou. Trying to give
my 2 cents back to the community.
Back to the problem: I checked in the MetacelloRepository for OSProcess, and
found out that latest version is 4.4.2. So I downloaded the
ConfigurationOfMagma from MetacelloRepository for Pharo 1.2...but then I
found out that I dont understand anything about Metacello or how it
works...so even if I tried to found a reference for OSProcess 4.4.0, i was
not able to find it.
Metacello added to my pending accounts list. Geez... every time it gets
larger and larger.
Cheers.
|
6fdd6d6a-8604-5ac7-d168-8ab4f3ce6d39
|
['12af681f-8784-b1f4-91e2-ef6a40237a69']
|
Hi,
Could anyone please explain why ooh323 generates an "onAlerting" message when the corresponding alerting message hasn't been received by Q.931 ? I am using asterisk-ooh323c-0.5 and when I place a call to a bogus phone number (ie. remote endpoint which is engaged or out of order) then ooh323 will still generate an "onAlerting" message immediatley after the call is initiated and subsequently the call will fail and no ringback is heard.
ooh323 version is 0.5 and asterisk version is <IP_ADDRESS>
I can recreate this problem and provide any relevant debug or trace to diagnose this further.
TIA
|
d9ae863b-ecfe-7b2d-7e71-3f4aa7cf7159
|
['12af681f-8784-b1f4-91e2-ef6a40237a69']
|
Guys,
I'm looking for an H323 client which can generate multiple, concurrent phone calls and display the
h245 / q.931 progress messages (ie. setup -> progress -> alerting -> connect). I'm not really concerned
about actually establishing an RTP stream, but only seeing the call setup messages (similar to the way callgen323 is done).
Now ohphone and simp323 can do this to some degree, however they both require a sound card to send & receive the
RTP stream and therefore cannot simulate multiple simultaneous calls (at least without installing multiple sound cards).
Would it be possible to use or compile simp323 or ohphone without the "sound card component" ?
Are there any other alternate h323 or SIP "command line" dialers around which are still maintained ?
<PERSON>
|
b00a4ee2-de15-df41-26b6-3c4dad29780a
|
['12b7d078-fbef-ab53-504a-640432cd9c20']
|
Hi all,
I am using an ASUS notebook, with mobile radeon 7500, and tried out
the tvout patch with following steps:
I retrived the Xorg cvs today, patched it with
http://megahurts.dk/rune/stuff/xorg_CVS-20050809-tv_output.patch.gz
and modified few lines to make it compile.
Since I live in New Zealand, the tvout format that I used is "PAL",
which is stated in my xorg.conf file as one of those attachments,
which is followed by the Xorg.0.log.
Here are two photo that I took to sure what happened when I ran the Xorg.
tv01.jpg is before executing startx, where tv is blank as expected.
tv02.jpg is when Xorg started, the screen is distored, but colors can
be recognized.
I know it is not garentee to work with my card, but I think it gets
not far away from it.
So wondering if anyone has any idea of it ?
Best Regards,
<PERSON>
|
3009b15e-d6ed-5971-020e-94e8ca28495d
|
['12b7d078-fbef-ab53-504a-640432cd9c20']
|
** Sorry for the duplication of this mail
Hi all,
I am using an ASUS notebook, with mobile radeon 7500, and tried out
the tvout patch with following steps:
I retrived the Xorg cvs today, patched it with
http://megahurts.dk/rune/stuff/xorg_CVS-20050809-tv_output.patch.gz
and modified few lines to make it compile.
Since I live in New Zealand, the tvout format that I used is "PAL",
which is stated in my xorg.conf file as one of those attachments,
which is followed by the Xorg.0.log.
Here are two photo that I took to sure what happened when I ran the Xorg.
tv01.jpg is before executing startx, where tv is blank as expected.
tv02.jpg is when Xorg started, the screen is distored, but colors can
be recognized.
I know it is not garentee to work with my card, but I think it gets
not far away from it.
So wondering if anyone has any idea of it ?
Best Regards,
<PERSON>
|
a16fc279-cbfc-22fb-f8bf-88cd64b36d7c
|
['12c31ef8-67a5-7226-5448-556e56899295']
|
I got a emailing today from <PERSON> with a large writeup on Vivato, which has been talked about here. I'm unsure as to the legalities of reposting it, but it looked quite interested.
You might check his site for the same writeup. If anyone is interested, I'll happily email it to them privately.
<PERSON>
RCeN/aWXIuVf2lfm@example.com
|
b0c8be0a-d7ba-969b-3cb4-910d7f582e5b
|
['12c31ef8-67a5-7226-5448-556e56899295']
|
Discouraged yes, defeated no.
There is an ISP in the neighboring town. I may put some feelers in
there to see if they might be interested in partnering in such an
arrangement to 'expand their business'.
<PERSON> - Soap Lake and Ephrata are the towns.
Thanks <PERSON>, as always. Informative answers.
<PERSON>
RCeN/aWXIuVf2lfm@example.com
http://www.myhomeoffice.org - New pictures of my kids here!
|
3269ae39-43e6-d5e3-83f2-79be3e19a691
|
['12f2a1ed-32e6-6284-c581-6d070daf62e6']
|
Hi,
What is the second easiest way to know who is online beside radwho when
using
FR & MySQL. The radacct table seems to be the only place. Will it be
sufficient
just testing if AcctStopTime is 0? I saw some 'old' sessions in the table,
which
have AcctStopTime = 0 and no terminate cause. These 'zombies' would have to
be
cleaned by a watchdog ... (Note: Zombies were left under FR 1.0.4, now I'm
on 1.0.5 and no zombies so far).
Am I on the right track here?
Thanks!
|
24503c58-dc90-8b32-eb58-19323e467fc8
|
['12f2a1ed-32e6-6284-c581-6d070daf62e6']
|
After using FR 1.0.5 for testing for a while with a FR+MySQL configuration,
I found out the
hard way that documentation is not a pet project of FR. The only up-to-date
documentation
I found so far is reading the source code for hours, days, weeks ...
There are lots of features I could not find anywhere in any kind of
documentation, but
in the source code, e.g. positional parameters for the SQL nas table.
Or you can use the IP or domain name within the nas table for the 'nasname'.
What happens to dynamic DNS addresses? etc....
Anyhow, it is a nice piece of software, working most of the times very well!
Additional guidance, a wiki or ... could be extremely helpful for the
project ... maybe
it even exists somewhere. I found my way around, but I am kind of stuck when
it comes
to the accounting records. Sometimes I simply do not get a stoptime and
therefore the session
is supposed to be still online. I can then take maybe the idle time, add it
to the last
startime and see if it makes 'sense'. I had 4+ records with empty starttime
for a nas.
All I like to do for instance ...
- User got 24h (or other time period) allocated
- When session ends an updated record for the next session time could be
generated
- When user logs in again, the remaining session time will be granted
But what happens when radacct does not get the stoptime for the last
session?
Anyhow, is there anything, anywhere (up-to-date) where I can find further
information?
Going through ever source file is quite a time consuming act.
Anyhow, Open Source is best ... I can apply changes without requesting a
license change ;-)
And where can you directly communicate with the developers ...
Thanks!
<PERSON>
|
ebb50069-1213-cd67-b770-a4136839dec5
|
['12fad7c2-857f-7631-460d-5d5d093cccfb']
|
Does anyone know of any extreme upgrades available for the eMate 300?
I'm interested in a faster processor and more RAM. How compatible are
the ARM 9 (?) chips running at 206MHz with the ARM 710a units in the
eMate? I'm sure bus speed would be an issue, though. If I could have
a 220MHz eMate with 128MBs of RAM and a 5GB hardcard and wireless I
would dump my laptop altogether. Would this even be possible or am I
smoking something?
<PERSON>
|
c5aba92b-3827-8831-6336-d41360c8d0b9
|
['12fad7c2-857f-7631-460d-5d5d093cccfb']
|
Then it must be the software you run. I've speedily run 10.2.8 on a Pismo
G3/400 with 256MBs of RAM and a 6GB drive by carefully selecting what I run.
This means sticking mostly to built-in applications. The darn thing even
plays DVDs nicely :) I now have another Pismo with a G4/550 upgrade, 1GB of
RAM, and a 60GB drive and I very comfortably run 10.4.3 with numerous 3rd
party applications.
A trimmer version of Mac OS X with some streamlined applications and some
notable missing items (i.e., iTunes, iPhoto, iDVD) which are known hogs
would present a wonderful interface for school children. Cover the LCD with
plexi like on a Game Boy and shockmount the HDD, and its on like Donkey
Kong, folks!
<PERSON>
|
d1516584-14ad-71d7-e73f-ef4419ac8af9
|
['12ff0cbe-7b4b-4f24-b0ef-0ea88dd5ee8a']
|
Hi all,
I have maven building several projects some of which are common and some
are shared between applications.
I want to be able to have a build that contains specific project
dependencies and produces a bundled result - such as a zip that can be
taken and given to the packaging/installation team. As I'm not using
web technology I can't find a packaging type that's suitable - but I
would have thought this is a fairly generic requirement.
Have I missed something obvious in Google - or could someone give me a
suggestion.
Regards,
|
bc32db27-7b51-9a50-2292-d68704260c66
|
['12ff0cbe-7b4b-4f24-b0ef-0ea88dd5ee8a']
|
Hi all,
I need to be able to find out the url to the base of an installed web-app
within a ServletContextListener (running under tomcat 4.1).
I have not been able to find out how to obtain this information, the closest
I have managed to get is jndi:/localhost/iPackager/ with a call to
sc.getResource("/") but I have no idea how to convert this to a http url...
can anyone shed any light or give me some pointers to how this may be
accomplished?
Thanks
<PERSON>
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.