instruction stringlengths 14 71 | response stringlengths 53 3.78k |
|---|---|
How is Planning used in the Straumann® system? | <html><body><table><tr><td>3.1 Implant position 12</td></tr><tr><td></td></tr><tr><td>3.2 Planning aids 19</td></tr><tr><td></td></tr></table></body></html> |
Why is Thoma important in implant procedures? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
What are the key considerations for Ti Alloy? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Can you explain Determining? | Determining each magnification factor or scale is facilitated by showing the X-ray Reference Sphere on the template (next to the scale reference). |
How is Depth used in the Straumann® system? |  Depth stops for osteotomes |
When do we use Morse? | The CrossFit® connection of Straumann® Bone Level Implants applies the know-how and benefits from the Straumann® synOcta® Morse taper connection to the connection requirements at bone level. Similar to the Straumann® synOcta® connection, the mechanically locking friction fit of the $15^{\circ}$ conical-cylindrical Cros... |
What is Ratchet? | Use the pivot of the Holding Key to stabilize the Ratchet during implant insertion or during tapping. |
Why is Indications important in implant procedures? | ѹ The Straumann® Dental Implant System ѹ Indications and Contraindications ѹ Preoperative Planning ѹ Surgical Procedures ѹ Healing Phase ѹ Additional Information on Instruments ѹ Appendix |
Why is Rinse important in implant procedures? | ѹ Never allow instruments to land on their tips. ѹ Use each instrument only for its intended purpose. ѹ Never let surgical residues (blood, secretion, tissue residues) dry on an instrument; clean immediately after surgery. ѹ Thoroughly clean off incrustations with soft brushes only. Disassemble instruments, cl... |
What are the key considerations for Gapwidth? | <html><body><table><tr><td>Shoulder diameter D (mm)</td><td>Gapwidth amin (mm)</td><td>Distance between adjacent teeth atbone level bmin (mm)</td></tr><tr><td>3.5 (NNC)</td><td>5.5</td><td>6.5</td></tr><tr><td>4.8 (RN)</td><td>7</td><td>8</td></tr><tr><td>6.5 (WN)</td><td>8.5</td><td>9.5</td></tr><tr><td>Rule</td><td>D... |
What is Tappingwith Handpiece? | <html><body><table><tr><td>Tappingwith Handpiece</td><td>Tappingwith Ratchet</td></tr><tr><td>Connect the Tap for Adapter to the Handpiece via the Handpiece Adapter. Do not exceed 15 rpm.</td><td>For tapping with the Ratchet connect a Ratchet Adapter to the Tap for Adapter.After inserting the Tap into the ca- vity, the... |
What are the key considerations for Healing Abutments? | A versatile portfolio of Healing Caps and Healing Abutments is available for all Straumann® implants, enabling soft-tissue sculpturing during transmucosal healing. They are recommended for intermediate use. After the soft-tissue healing phase they are replaced with the appropriate temporary or final restoration. |
What is Shape? | Shape the coronal part of the implant bed with the Standard Plus Profile Drill. |
What is While? | While approaching the final implant position, make sure that the drilled holes on the blue transfer part are oriented exactly orofacially. This positions the four protrusions of the internal connection for ideal prosthetic abutment orientation. A quarter turn to the next drilled hole corresponds to a vertical displace... |
What are the key considerations for Medvedev? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Why is Chapter important in implant procedures? | After implantation, the implant is closed – hand-tightened – with an SCS Closure Screw, Healing Cap or Healing Abutment to protect the implant (for SCS Screwdrivers see Chapter 6.1.8). The surgeon can choose between submucosal and transmucosal healing and has many options available for soft tissue management through a ... |
What are the key considerations for Depth Stop? | <html><body><table><tr><td colspan="4">Straumann@BLX implants</td><td colspan="7"> Surgical protocol</td><td colspan="4">FDI notation (World Dental Federation)</td></tr><tr><td></td><td></td><td></td><td></td><td> Straumann? VeloDrillTM Guided Surgery</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><... |
What is the purpose of Implant Line? | ѹ Prosthetic Procedures for the Narrow Neck CrossFit® Implant – Straumann $\textcircled{1}$ Narrow Neck CrossFit® Implant Line (702058/en) ѹ Straumann® synOcta® Prosthetic System, Basic Information (702163/en) ѹ Cement-retained Crowns and Bridges with the Solid Abutment System: Straumann® Solid Abutment Prostheti... |
What are the key considerations for Careful? | Careful treatment of all instruments is of the utmost importance. Even slight damage, for instance to the drill tips (e.g., when the drills are “thrown” into a metal bowl) impairs cutting performance and thus the clinical result. With correct and careful care, the high quality of the material and excellent workmanship ... |
Why is Overview important in implant procedures? | 1.1 Overview 3 1.2 Implant lines 4 1.3 Implant-abutment connections 6 1.4 Material 8 1.5 Surface 8 1.6 Transfer piece 8 |
How is Switzerland Phone used in the Straumann® system? | International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone $+41$ (0)61 965 11 11 Fax $+41$ (0)61 965 11 01 www.straumann.com |
What is the purpose of Superhydrophilic Implants Placed? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
How is Buser used in the Straumann® system? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
When do we use Module Guided Surgery? | The C Module Guided Surgery stores guided handles and instrumentation for template fixation pins. All tools are stored horizontally on the holder. |
What is the purpose of Quintessence Int? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
How is Guided Surgery Cassette used in the Straumann® system? | The conventional, non-modular Straumann® Guided Surgery Cassette (Art. No. 034.001) and the Straumann® Basic Guided Surgery Cassette (Art no. 034.281) don't provide the adequate storage space and workflow for the new Straumann® Guided Surgery components, like the Guided Adapters FIBA, the FIBA compatible Profile Drills... |
How is Widen used in the Straumann® system? | Step 7 – Widen the implant bed to $\theta4.2\mathsf{m m}$ Continue with the $\varnothing4.2{\mathrm{mm}}$ Straumann® Twist Drill PRO and check the final preparation depth with the $\varnothing4.2{\mathrm{mm}}$ Depth Gauge. |
Why is Guided Surgery Workflow important in implant procedures? | This guide provides an overview of the instruments required for the Straumann® Guided Surgery Workflow and describes the steps required for guided implant bed preparation and guided placement of implants of the Straumann® Dental Implant system. It is assumed that the user is familiar with placing dental implants. Not a... |
Can you explain Never? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
What are the key considerations for Current Treatment Modalities? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
What is Access? | ѹ Mucosal thickness, ѹ Type of Surgical Template (mucosa, bone or tooth-supported) ѹ Access for instrument irrigation. |
Why is Prosthetic Instruments important in implant procedures? | ѹ Well maintained instruments are a basic requirement for successful treatment. You will find detailed information in the brochure Straumann® Surgical and Prosthetic Instruments, Care and Maintenance (702000/en). |
When do we use Template Fixation Pin? | To insert the pins, a T-sleeve for Template Fixation Pin (art. no. 034.283) and Drill for Template Fixation Pin (art. no. 034.284) are used. |
What is the purpose of All Closure Screws? | Note: All Closure Screws are delivered sterile and ready to use. |
What is the purpose of Recommendations? | Recommendations for correct torque with the Straumann® Dental Implant System |
Can you explain Chappuis? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Why is Handles important in implant procedures? | ѹ Straumann® Dental Implant System, Basic Information (702084/en) ѹ Straumann® Bone Level Tapered Implant, Basic Information (702167/en) ѹ Straumann® BLX Implant System, Basic Information (702115/en) ѹ Straumann® TLX Implant System, Basic Information (702854/en) ѹ Straumann® Modular Cassette, Basic Informat... |
What are the key considerations for Basic Guided Surgery Cassette? | The conventional, non-modular Straumann® Guided Surgery Cassette (Art. No. 034.001) and the Straumann® Basic Guided Surgery Cassette (Art no. 034.281) don't provide the adequate storage space and workflow for the new Straumann® Guided Surgery components, like the Guided Adapters FIBA, the FIBA compatible Profile Drills... |
What are the key considerations for Tapping? | Step 2 – Tapping the thread in dense bone Tap the implant bed with the S/SP Tap according to the endosteal diameter, in case of too high insertion torques. |
When do we use Mucosal? | ѹ Mucosal thickness, ѹ Type of Surgical Template (mucosa, bone or tooth-supported) ѹ Access for instrument irrigation. |
How is Extraction used in the Straumann® system? | ѹ Extraction sites, where the bone cavity is often wider than the diameter necessary to hold the Drill Stop. ѹ Use with drill templates, due to the interference with the template. |
When do we use Surgical? | ѹ Well maintained instruments are a basic requirement for successful treatment. You will find detailed information in the brochure Straumann® Surgical and Prosthetic Instruments, Care and Maintenance (702000/en). |
How is The Bone Level Tapered Implants used in the Straumann® system? | The Bone Level Tapered Implants are delivered with the Loxim® Transfer Piece, which is connected to the implant with a snap-in mounting. |
What is the purpose of Combined? | ѹ Manual thread tapping ѹ Manual placement of implants into their final position in the implant bed ѹ Manual screwing of healing caps and closure screws\*. ѹ Screwing of abutments and occlusal screws\*. \*Combined with the torque control device for defined torque |
How is Screwdrivers used in the Straumann® system? | After implantation, the implant is closed – hand-tightened – with an SCS Closure Screw, Healing Cap or Healing Abutment to protect the implant (for SCS Screwdrivers see Chapter 6.1.8). The surgeon can choose between submucosal and transmucosal healing and has many options available for soft tissue management through a ... |
What is Partially Dentate Patients? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
Can you explain Templates? | The $\mathsf{X}$ -ray Templates are used for measurement and comparison. They also assist the user in selecting the suitable implant type, diameter and length. The following X-ray Templates are available: |
How is The Narrow Neck used in the Straumann® system? | The Narrow Neck CrossFit $\textcircled{1}$ (NNC) Implant is a $3.3{\mathsf{m m}}$ diameter implant with a narrow prosthetic platform. The NNC Implant is a Standard Plus (SP) Tissue Level Implant with a machined neck of $1.8\mathsf{m m}$ in height. The implant body and thread design is the same as the Straumann ${\texts... |
How is First used in the Straumann® system? | ѹ The bone is prepared using the twist drills $(\emptyset2.2{\bmod{2}}.8{\mathsf{m m}}/3.5{\mathsf{m m}}/4.2{\mathsf{m m}})$ in accordance with the desired implant diameter. The surgeon feels his or her way very carefully down to the cortical bone of the sinus floor (minimum distance $\mathsf{1m m},$ . This process req... |
Why is Technical important in implant procedures? | For more information please refer to Chapter 3. Technical information on Straumann® guided instruments on page 16. |
Why is Windows important in implant procedures? | The Surgical Template must allow for proper irrigation of the surgical site. Windows may also be included in the Surgical Template. For a correct fit of the handle cylinder in the T-sleeve, remove additional material around the T-sleeve. |
What is Correct? | #### Step 4 – Correct implant orientation for Straumann® implants with CrossFit® connection |
What is Closure? | <html><body><table><tr><td>Connection</td><td>Recommended torque</td></tr><tr><td>Abutment (incl. angled abutments)</td><td>35 Ncm</td></tr><tr><td>Closure screws</td><td>15 Ncm</td></tr><tr><td>Healing caps</td><td>15 Ncm</td></tr><tr><td>Occlusal screws</td><td>15 Ncm</td></tr></table></body></html> |
What is the purpose of This Basic Information? | The Straumann® Dental Implant System offers a wide range of implant lines with diverse body and neck designs and different materials. This Basic Information focuses on the Titanium and Roxolid® Tissue Level and Bone Level implants with a parallel-walled endosteal design. These implants can be placed with the instrument... |
What are the key considerations for Bridges? | ѹ Prosthetic Procedures for the Narrow Neck CrossFit® Implant – Straumann $\textcircled{1}$ Narrow Neck CrossFit® Implant Line (702058/en) ѹ Straumann® synOcta® Prosthetic System, Basic Information (702163/en) ѹ Cement-retained Crowns and Bridges with the Solid Abutment System: Straumann® Solid Abutment Prostheti... |
When do we use Replacements? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
Can you explain Narrow? | <html><body><table><tr><td colspan="2">List of abbreviations</td></tr><tr><td>SCS =</td><td>Screw Carrying System</td></tr><tr><td>HDD =</td><td>Horizontal Defect Dimension</td></tr><tr><td>NNC =</td><td>Narrow Neck CrossFit connection (3.5 mm)</td></tr><tr><td>RN =</td><td>Regular Neck (4.8 mm)</td></tr><tr><td>WN =</... |
How is Information used in the Straumann® system? | Information on the Straumann® Guided Implants and the Straumann® Guided Surgery System can be found in the brochure Straumann® Guided Surgery, Basic Information (702083/en). |
What is the purpose of The Profile Drill? | When inserting a Straumann® Standard Plus Implant up to the implant shoulder level (see Chapter 3), the preparation depth must be $2\mathsf{m m}$ deeper than the indicated implant length. (Example: The preparation depth for a $\boldsymbol{10}\boldsymbol{\mathrm{mm}}\mathsf{S P}$ Implant inserted up to shoulder level m... |
When do we use Maestre? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Can you explain Endosteal? | <html><body><table><tr><td colspan="7">Instrumentation for basic implant bed preparation</td><td colspan="5">Endosteal (mm)</td></tr><tr><td>Step</td><td>Art. no.</td><td>Product</td><td> max.rpm</td><td></td><td></td><td>3.3</td><td></td><td>4.1</td><td></td><td>4.8</td></tr><tr><td>1 Ridge preparation</td><td>044.004... |
What is the purpose of Ratchet Adapter Hold? | Step 1 – Attach the Ratchet Adapter Hold the enclosed part of the implant carrier. Attach the Ratchet Adapter. A click will be heard when the Adapter is attached correctly. |
What is Closure Screw? | Spread the flap slightly and remove the Closure Screw with the SCS Screwdriver. |
Can you explain Mucosa? | <html><body><table><tr><td>Connection</td><td>Recommended torque</td></tr><tr><td>Basal screw</td><td>35 Ncm</td></tr><tr><td>Mucosa cylinder</td><td>35 Ncm</td></tr><tr><td>Bone graft abutment</td><td>15 Ncm</td></tr></table></body></html> |
What are the key considerations for Implants Standard? | <html><body><table><tr><td colspan="6"></td></tr><tr><td>Tissue Level Standard Implants</td><td></td><td>RN 4.8mm</td><td>RN 4.8mm</td><td>RN 4.8mm</td><td>WN* 6.5mm</td></tr><tr><td></td><td>√ 不 2.8 mm</td><td>3.3 mm</td><td>mD</td><td></td><td>不 2.6mm1 #</td></tr><tr><td>6 mm</td><td>S 3.3 RN</td><td></td><td>4.1mm ... |
Can you explain Maintenance? | ѹ Well maintained instruments are a basic requirement for successful treatment. You will find detailed information in the brochure Straumann® Surgical and Prosthetic Instruments, Care and Maintenance (702000/en). |
What is the purpose of Early? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Can you explain Further? | Continuing education ensures long-term success! Please ask your Straumann representative directly for information on the Straumann® Dental Implant System courses and training. Further information at www.straumann.com. |
Why is Ratchet Adapter important in implant procedures? | Step 1 – Attach the Ratchet Adapter Hold the enclosed part of the implant carrier. Attach the Ratchet Adapter. A click will be heard when the Adapter is attached correctly. |
Why is Modular Cassette important in implant procedures? | For more technical information, please see the brochure Straumann® Modular Cassette - Basic Information (702527/en). |
Can you explain Guided Adapter? | <html><body><table><tr><td>Art. No.</td><td> Picture</td><td>Article</td></tr><tr><td colspan="3">BModule</td></tr><tr><td>041.776</td><td></td><td>Straumann? Modular Cassette, B Module</td></tr><tr><td>041.781</td><td>00 中 品品 ?</td><td>B Module, Guided Basic Tray</td></tr><tr><td>034.010</td><td>034.010 3</td><td>Muco... |
Why is Only Taps important in implant procedures? | Only Taps labeled to be FIBA compatible are to be used with the Guided Adapter for taps, FIBA. Always use the correct Guided Adapter according to the T-sleeve position (H2, H4, H6). Using the incorrect Guided Adapter or non-FIBA compatible may result in an incorrect drilling depth. |
Can you explain Cigarette? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
What is the purpose of Healing Phase? | ѹ The Straumann® Dental Implant System ѹ Indications and Contraindications ѹ Preoperative Planning ѹ Surgical Procedures ѹ Healing Phase ѹ Additional Information on Instruments ѹ Appendix |
Why is Surgical Procedures important in implant procedures? | ѹ The Straumann® Dental Implant System ѹ Indications and Contraindications ѹ Preoperative Planning ѹ Surgical Procedures ѹ Healing Phase ѹ Additional Information on Instruments ѹ Appendix |
What is Bone Level Prosthetic Procedures? | ѹ Prosthetic Procedures for the Narrow Neck CrossFit® Implant – Straumann $\textcircled{1}$ Narrow Neck CrossFit® Implant Line (702058/en) ѹ Straumann® synOcta® Prosthetic System, Basic Information (702163/en) ѹ Cement-retained Crowns and Bridges with the Solid Abutment System: Straumann® Solid Abutment Prostheti... |
What is Disassemble? | ѹ Never allow instruments to land on their tips. ѹ Use each instrument only for its intended purpose. ѹ Never let surgical residues (blood, secretion, tissue residues) dry on an instrument; clean immediately after surgery. ѹ Thoroughly clean off incrustations with soft brushes only. Disassemble instruments, cl... |
What are the key considerations for Bone Level? | 1. Pilot Twist Drill PRO, $\ensuremath{\mathcal{O}}2.2\ensuremath{\mathrm{mm}}$ 2. Alignment Pin, $\mathcal{O}2.2\mathsf{m m}$ 3. Twist Drill PRO, $\ensuremath{\mathcal{O}}2.8\ensuremath{\mathrm{mm}}$ 4. Twist Drill PRO, $\mathcal{O}3.5\mathsf{m m}$ 5. Twist Drill PRO, $\varnothing4.2{\mathsf{m m}}$ 6. ... |
When do we use Article Name? | <html><body><table><tr><td>Art. No.</td><td>Picture</td><td>Article Name</td><td>Max rpm.</td><td>Endosteal implant diameter (mm)</td></tr><tr><td>026.0144</td><td>二 026.01441111</td><td>Milling Cutter, 2.2 mm, guided</td><td>800</td><td>Q2.9</td></tr><tr><td>034.215</td><td>034.215</td><td>Milling Cutter,2.8 mm, guide... |
What is the purpose of Handpiece Adapter Hold? | Step 1 – Attach the Handpiece Adapter Hold the enclosed part of the implant carrier. Attach the Handpiece Adapter. A click will be heard when the Adapter is attached correctly. |
What is Prosthetic System? | ѹ Prosthetic Procedures for the Narrow Neck CrossFit® Implant – Straumann $\textcircled{1}$ Narrow Neck CrossFit® Implant Line (702058/en) ѹ Straumann® synOcta® Prosthetic System, Basic Information (702163/en) ѹ Cement-retained Crowns and Bridges with the Solid Abutment System: Straumann® Solid Abutment Prostheti... |
How is Related used in the Straumann® system? | 7.1 Related documentation 55 7.2 Important guidelines 56 |
When do we use Clinical Analysis When Using? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Why is Loading Protocols important in implant procedures? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
What is Edentulous Patients? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
When do we use Moderate Insertion Torque? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
What are the key considerations for See Chapter? | Ideally, in the esthetic region, the implant shoulder should be positioned about $3-4{\mathsf{m m}}$ subgingival of the prospective gingival margin and with the correct implant orientation (See Chapter 4.3). |
What is the purpose of Biological? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
How is Nelson used in the Straumann® system? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
What is Milling? | Note: Milling cutters have no stop. Milling cutters must only be used for flattening the alveolar ridge. |
Why is Straumann important in implant procedures? | Straumann® and/or other trademarks and logos from Straumann® mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. |
What are the key considerations for Belser? | Buser D./ Martin W./ Belser U.: Optimizing esthetics for implant restorations in the anterior maxilla :anatomical and surgical considerations. Int J Oral Maxillofac Implants, 2004; 19 Suppl: 43–61. |
What are the key considerations for Prosthetic Procedures? | ѹ Prosthetic Procedures for the Narrow Neck CrossFit® Implant – Straumann $\textcircled{1}$ Narrow Neck CrossFit® Implant Line (702058/en) ѹ Straumann® synOcta® Prosthetic System, Basic Information (702163/en) ѹ Cement-retained Crowns and Bridges with the Solid Abutment System: Straumann® Solid Abutment Prostheti... |
What is Minimum? | Minimum vertical space requirement for access with surgical instruments |
What is the purpose of Surgical Template? | ѹ Implants colored in green are compatible with the fully guided workflow. ѹ Implants colored in blue are too wide to fit through the $\mathcal{O}5.0\mathsf{m m}$ T-sleeves. Remove the Surgical Template after guided implant bed preparation and place the implant freehand. ѹ Implant colored in yellow offer guided p... |
When do we use Ridge Augmentation Procedures? | ѹ Volume 1: Implant Therapy in the Esthetic Zone – Single-Tooth Replacements ѹ Volume 2: Loading Protocols in Implant Dentistry – Partially Dentate Patients ѹ Volume 3: Implant Placement in Post-Extraction Sites – Treatment Options ѹ Volume 4: Loading Protocols in Implant Dentistry – Edentulous Patients ѹ V... |
Why is With Straumann important in implant procedures? | ѹ After removing the implant from the solution, the SLActive® surface treatment is chemically active for 15 minutes. ѹ With Straumann® guided instruments, increased insertion torques can occur due to precise osteotomy preparation. ѹ For immediate loading, a final torque of at least 35 Ncm should be achieved ѹ Excessive... |
What are the key considerations for Standard Plus Im? | When inserting a Straumann® Standard Plus Implant up to the implant shoulder level (see Chapter 3), the preparation depth must be $2\mathsf{m m}$ deeper than the indicated implant length. (Example: The preparation depth for a $\boldsymbol{10}\boldsymbol{\mathrm{mm}}\mathsf{S P}$ Implant inserted up to shoulder level m... |
Why is Salvi important in implant procedures? | 1 Bernhard N et al. (2009): The Binary TiZr Alloy – A newly developed Ti Alloy for use in dental implants; Forum Implantologicum 5(30) 2 Medvedev et al. (2016): Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material; J. Mech. Behav. Biomed. Mater. 2016 Sep; 62:384-98. doi: 10.1016/j.... |
Why is Drill Stop important in implant procedures? | For more information, please refer to Straumann® Drill Stop, Basic Information (702874/en). |
End of preview. Expand in Data Studio
🦷 Straumann Stage 2 – Instruction-Tuned Q&A Dataset
This dataset contains 300 domain-specific question–answer pairs generated from two technical manuals:
- Straumann® Dental Implant System
- Straumann® Guided Surgery System Instruments
Each entry is formatted as an instruction + response pair, optimized for use in training medical or dental assistant LLMs.
📁 Dataset Structure
Each example looks like:
{
"instruction": "What is the purpose of a guided pilot drill?",
"response": "The guided pilot drill is used to ensure accurate initial osteotomy depth and angulation based on the surgical plan."
}
- Downloads last month
- 5