docs/sample_00003/document.md

0 to 70% (vs. fixed speed) while reducing installation time.

![Figure sample_00003_fig01](figures/sample_00003_fig01.png)

# SPECIFICATIONS

<table><tr><td>Indoor enclosures</td><td>IP20 Open, TYPE 1, TYPE 12</td></tr><tr><td>Outdoor enclosures</td><td>TYPE 3R, TYPE 4X</td></tr><tr><td>Input supply</td><td>1.5-600 hp (frame A-D) wall or base mounted</td></tr><tr><td>Ambient<br>temperature</td><td>\(14^{\circ }F-113^{\circ }F(-10^{\circ }C-45^{\circ }C)\) Higher temperatures can be achieved<br>by derating the output amperage of<br>the drive 10% for up to 122°F(50°C)</td></tr><tr><td>Communication</td><td>Modbus® RTU, Metasys N2, FLN, and BACnet standard<br>Others available with option cards</td></tr><tr><td>Altitudes</td><td>At altitudes from 0 to 1,000 meters<br>(0 to 3,300 ft)<br>Nameplate rated current is available<br>Derate for altitudes above 1,000<br>(3,300 ft) with a maximum operating<br>altitude of 3,000 m(9,900 ft)<br>Consult factory for applications above<br>3,000 m(9,900 ft)</td></tr><tr><td>Relative humidity</td><td>Lower than 95% without condensation</td></tr><tr><td>Electrical -<br>input power</td><td>3 phase 380 V to 480 V±10%<br>1 phase 200 V to 240 V±10%<br>3 phase 200 V to 240 V±10%<br>3 phase 525 V to 600 V±10%<br>Frequency 50 or 60 Hz,±2 Hz</td></tr><tr><td>Electrical -<br>output power</td><td>3 phase from 0 to V supply</td></tr></table>

# AQUAVAR® IPC VARIABLE SPEED CONTROLLER

# FEATURES

·Easier start-up and programming with Start-Up Genie

·Wide range of standard and permanent magnet motors with power up to 600 hp

·Multi-pump configuration for up to four (4) pumps - no need for programmable logic controller (PLC)

·Remote commissioning and monitoring with USB connectivity and software

·Two wire multi-pump connection for faster installation

·Hand on, off, and auto-on buttons available for easy pump operation at the keypad. No toggling between local and remote operation

·System redundancy with multi-master control in case of drive failure

·BACnet and Modbus as a standard for seamless BMS integration

·Submersible and above ground applications

·Wide range of voltage and enclosure options

·True 208 V coverage

·Dedicated single phase input

·Remote commissioning and monitoring with USB connectivity and software

·In-panel or handheld keypad with backlit display

·Alarm Log for last 5 alarms and maintenance events

·EMC/RFI filters and dual DC-link reactors to reduce drive noise emissions and interference

·I/O expansion cards, factory installed or field configured