| 0 to 70% (vs. fixed speed) while reducing installation time. | |
|  | |
| ## SPECIFICATIONS | |
| <table><tr><td>Indoor enclosures</td><td>IP20 Open, TYPE 1, TYPE 12</td></tr><tr><td>Outdoor enclosures</td><td>TYPE 3R, TYPE 4X</td></tr><tr><td>Input supply</td><td>1.5 - 600 hp (frame A - D) wall or base mounted</td></tr><tr><td>Ambient temperature</td><td>14°F - 113°F (-10°C - 45°C)</td></tr><tr><td>Communication</td><td>Higher temperatures can be achieved by derating the output amperage of the drive 10% for up to 122°F (50°C)</td></tr><tr><td>Altitudes</td><td>Modbus® RTU, Metasys N2, FLN, and BACnet standard<br>Others available with option cards</td></tr><tr><td>Relative humidity</td><td>At altitudes from 0 to 1,000 meters (0 to 3,300 ft)<br>Nameplate rated current is available<br>Derate for altitudes above 1,000 (3,300 ft) with a maximum operating altitude of 3,000 m (9,900 ft)<br>Consult factory for applications above 3,000 m (9,900 ft)</td></tr><tr><td>Electrical input power</td><td>Lower than 95% without condensation</td></tr><tr><td>Electrical input power</td><td>3 phase 380 V to 480 V ±10%<br>1 phase 200 V to 240 V ±10%<br>3 phase 200 V to 240 V ±10%<br>3 phase 525 V to 600 V ±10%<br>Frequency 50 or 60 Hz, ±2 Hz</td></tr><tr><td>Electrical output power</td><td>3 phase from 0 to V supply</td></tr></table> | |
| ## AQUAVAR® IPC VARIABLE SPEED CONTROLLER | |
| ## FEATURES | |
| - Easier start-up and programming with Start-Up Genie- Wide range of standard and permanent magnet motors with power up to 600 hp- Multi-pump configuration for up to four (4) pumps - no need for programmable logic controller (PLC)- Remote commissioning and monitoring with USB connectivity and software- Two wire multi-pump connection for faster installation- Hand on, off, and auto-on buttons available for easy pump operation at the keypad. No toggling between local and remote operation- System redundancy with multi-master control in case of drive failure- BACnet and Modbus as a standard for seamless BMS integration- Submersible and above ground applications- Wide range of voltage and enclosure options- True 208 V coverage- Dedicated single phase input- Remote commissioning and monitoring with USB connectivity and software- In-panel or handheld keypad with backlit display- Alarm Log for last 5 alarms and maintenance events- EMC/RFI filters and dual DC-link reactors to reduce drive noise emissions and interference- I/O expansion cards, factory installed or field configured |