input_text string | input_image image | reasoning_text string | output_image image | category string | quality int64 | consistency int64 | instruction_following int64 | reasoning_following int64 |
|---|---|---|---|---|---|---|---|---|
Show the bird flying away after being startled by loud noise. | <think>The user wants to show the birds flying away after being startled.
Here's my plan:
1. Identify the birds on the branch. There are six birds.
2. To convey "flying away after being startled," I should remove some or all of the birds from the branch.
3. To make it dynamic and show the *act* of flying away, I will k... | Casual & Logical | 5 | 5 | 3 | 5 | ||
Show the balloon shrinking as air slowly leaks out. | <think>The user wants to show the hot air balloon shrinking as if air is leaking out.
To achieve this, I need to:
1. **Reduce the overall size of the balloon envelope.** This will make it appear smaller.
2. **Introduce some wrinkles or deflated texture to the balloon fabric.** A fully inflated balloon is smooth and t... | Casual & Logical | 5 | 5 | 1 | 2 | ||
Portray the flower wilting after being left in hot sun. | <think>The user wants to show a rose wilting after being in the hot sun.
The original image shows a vibrant, fresh rose with water droplets, under a bright sun.
Here's a plan to achieve the wilting effect:
1. **Remove water droplets:** The current image shows water droplets, implying freshness or recent rain/dew. Wil... | Casual & Logical | 5 | 5 | 5 | 3 | ||
Show the spiderweb torn by falling branch from nearby tree. | <think>The user wants to modify the existing spiderweb to appear torn by a falling branch.
Here's my plan:
1. **Identify the area for the tear:** The top-left or top-right section of the web seems most natural for a branch to fall through, given the tree trunk on the right and the general composition. I'll choose the... | Casual & Logical | 5 | 5 | 2 | 3 | ||
Display the stone sinking to the bottom of the pond after being thrown. | <think>The user wants to show the stone sinking to the bottom of the pond.
The current image shows the stone just hitting the water, with a splash and ripples.
Here's the plan:
1. **Remove the stone from its current position:** The stone is currently at the surface, creating a splash. This needs to be removed.
2. **... | Casual & Logical | 5 | 5 | 2 | 3 | ||
Depict the snow slowly melting into a puddle on the warm sidewalk. | <think>The user wants to show snow melting into puddles on the sidewalk.
The current image shows a clear, sunny day with snow piled up next to a clean sidewalk.
To achieve the melting effect, I need to:
1. **Modify the snow pile:** Make the edges of the snow pile next to the sidewalk appear less sharp and more irregul... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Display the sandcastles collapsing after the ocean tide rolls in. | <think>The user wants to modify the image to show sandcastles collapsing after the ocean tide rolls in.
Here's my plan:
1. **Identify the main subject:** The sandcastle in the foreground.
2. **Identify the action:** Collapsing due to tide.
3. **Elements to add/modify:**
* **Water:** The tide needs to be shown... | Casual & Logical | 5 | 5 | 3 | 3 | ||
Render the collapsed tent after heavy wind tore through the campsite. | <think>The user wants to transform the standing tent into a collapsed tent, implying damage from heavy wind.
Here's my plan:
1. **Identify the main subject:** The tent.
2. **Determine the core change:** The tent needs to appear collapsed and damaged. This means its structure should be broken, fabric sagged, and poss... | Casual & Logical | 4 | 5 | 3 | 3 | ||
Show the tangled fishing line after a sudden tug from fish. | <think>The user wants to modify the fishing line to appear tangled after a sudden tug from a fish.
Here's my plan:
1. **Identify the fishing line:** The current line is a single, taut strand extending from the rod tip into the water.
2. **Simulate a "tug":** A tug would likely cause the line to become less taut, pot... | Casual & Logical | 4 | 5 | 5 | 5 | ||
Show the vase shattered on floor with flowers scattered. | <think>The user wants to transform the image to show a shattered vase and scattered flowers on the floor.
Here's my plan:
1. **Remove the vase and flowers from the table:** The current vase and bouquet need to be removed from their position on the table.
2. **Generate a shattered vase on the floor:** Create realisti... | Casual & Logical | 5 | 5 | 5 | 3 | ||
Illustrate the leaf falling from tree after strong gust. | <think> The user wants to illustrate a leaf falling from a tree after a strong gust.
The current image shows a beautiful autumn tree with many leaves, some already on the ground.
To achieve the desired effect, I need to:
1. **Add falling leaves:** Introduce several individual leaves in mid-air, clearly detaching from... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Display the camera lens fogged after sudden temperature drop. | <think> The user wants to show the camera lens fogged due to a sudden temperature drop. This means I need to add a misty, translucent effect specifically to the lens area.
Here's my plan:
1. **Identify the camera lens:** The main subject is the camera, and the lens is clearly visible in the center.
2. **Isolate the ... | Casual & Logical | 4 | 5 | 5 | 5 | ||
Show the butterfly landing on a flower causing it to bend. | <think>The user wants to modify the image to show the butterfly landing on the flower, and the flower bending under its weight.
Here's my plan:
1. **Identify the target elements:** The butterfly and the pink flower it's currently on.
2. **Analyze current state:** The butterfly is hovering just above the flower, not ... | Casual & Logical | 5 | 5 | 5 | 3 | ||
Depict the lantern flickering out due to the strong wind. | <think>
The user wants to show the lantern flickering out due to strong wind.
Here's my plan:
1. **Dim the lantern:** Reduce the overall brightness and glow of the lantern significantly. It should appear much weaker, as if the flame inside is struggling.
2. **Introduce flickering:** Make the light within the lantern ... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Render the statue cracked from the falling branch. | <think>The user wants to modify the image to show the statue cracked due to a falling branch.
Here's my plan:
1. **Introduce a falling branch:** Add a branch, possibly broken off from one of the surrounding trees, positioned as if it has just impacted or is about to impact the statue. It should look natural within th... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Show the wheelbarrow tipped over with plants spilling out. | <think>The user wants to modify the image to show the wheelbarrow tipped over with plants spilling out.
Here's my plan:
1. **Identify the main subject:** The wheelbarrow filled with flowers.
2. **Determine the action:** The wheelbarrow needs to be tipped over. This implies a change in its orientation and position.
3... | Casual & Logical | 5 | 5 | 2 | 2 | ||
Illustrate the bubble bursting as a finger touched its surface. | <think>The user wants to illustrate a bubble bursting due to a finger touching its surface.
Here's the plan:
1. **Introduce a finger:** Add a human finger (e.g., an index finger) approaching the bubble from the top-right or top-left, positioned to make contact.
2. **Transform the bubble:** Change the perfectly spheri... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Render the rock cracked after being struck by lightning. | <think>The user wants to add cracks to the large rock formation in the image, as if it has been struck by lightning.
Here's my plan:
1. **Identify the main rock to be affected:** The prominent, large rock formation in the center-left of the image is the primary target.
2. **Simulate lightning strike impact:** Lightn... | Casual & Logical | 5 | 5 | 5 | 3 | ||
Render the fog lifting to reveal the mountain in the morning. | <think>The user wants to see the fog lifting to reveal more of the mountain.
This means I need to reduce the density and height of the fog layer, especially in the mid-ground and background where the mountains are.
I should aim to make the mountain peaks and slopes more visible, while still retaining some atmospheric h... | Casual & Logical | 5 | 5 | 3 | 4 | ||
Show the wheel wobbling after the nail punctured the tire. | <think>The user wants to show a bicycle wheel wobbling after a tire puncture.
To achieve this, I need to:
1. **Deflate the tire:** The current tire looks fully inflated. I need to make it appear flat or significantly deflated, especially where it meets the ground, to indicate a puncture. This will involve deforming th... | Casual & Logical | 4 | 4 | 1 | 2 | ||
Render the paintbrush dripping color onto the empty canvas. | <think>The user wants to add a paintbrush dripping color onto the empty canvas.
Here's my plan:
1. **Identify the canvas:** The large white rectangle in the center is the canvas.
2. **Identify the top of the canvas:** The top edge where the canvas meets the easel clamp.
3. **Add a paintbrush:** Place a paintbrush, ... | Casual & Logical | 5 | 4 | 5 | 5 | ||
Illustrate the cat startled and leaping from a loud noise. | <think>The user wants to modify the image to show a cat startled and leaping due to a loud noise.
Here's my plan:
1. **Identify the subject:** The cat is the main subject that needs to change.
2. **Current state of the cat:** The cat is currently sitting calmly on the couch.
3. **Desired state of the cat:** The cat... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Depict the scorched paper curling from exposure to flame. | <think>The user wants to transform the crumpled piece of paper into a scorched, curling piece of paper, as if it has been exposed to flame.
Here's a step-by-step plan:
1. **Identify the main subject:** The crumpled white paper on the table.
2. **Simulate scorching:** Apply dark, burnt-like textures and colors (black... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Depict the robot leaning sideways after a loose wire. | <think>The user wants to modify the existing image of a robot.
The core instruction is to show the robot "leaning sideways after a loose wire."
Here's a step-by-step plan:
1. **Identify the main subject:** The robot.
2. **Determine the primary action:** Leaning sideways. This implies a loss of balance or a malfuncti... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Render the flower drooping from too much shade. | <think>The user wants the flower to appear droopy, as if suffering from too much shade. This implies a lack of vitality.
Here's a plan:
1. **Alter the flower's posture:** The most direct way to show drooping is to change the angle of the flower head. It should bend downwards, losing its upright, vibrant stance.
2. *... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Show the mountain covered in snow after a blizzard. | <think> The user wants to transform the current image of a green, sunlit mountain into a snow-covered mountain after a blizzard.
Here's the plan:
1. **Snowify the Mountain:** Apply a thick layer of white snow to all visible parts of the mountain, including the peak and slopes, replacing the green grass and brown patc... | Casual & Logical | 5 | 3 | 5 | 5 | ||
Depict the hat flying off during a sudden gust. | <think>The user wants to show the hat flying off due to a sudden gust of wind.
Here's the plan:
1. **Remove the existing hat:** Inpaint the straw hat from the woman's head, revealing her hair and the top of her head. Ensure the hair bun remains visible and natural.
2. **Add a flying hat:** Generate a similar straw ha... | Casual & Logical | 5 | 5 | 5 | 4 | ||
Render the pot cracked after overheating on stove. | <think>The user wants to modify the pot in the image to appear cracked, specifically due to overheating on the stove.
Here's a step-by-step plan:
1. **Identify the material of the pot:** The pot appears to be ceramic or stoneware, which would crack rather than melt or deform in other ways when overheated.
2. **Deter... | Casual & Logical | 4 | 5 | 5 | 5 | ||
Illustrate the car leaving skid marks after sudden braking. | <think>The user wants to add skid marks to the image, indicating sudden braking.
The current image shows a car on a wet road at night, with some motion blur, suggesting movement.
To add skid marks, I need to:
1. Identify the path the car is taking.
2. Add dark, linear marks on the road surface, originating from the tir... | Casual & Logical | 5 | 5 | 1 | 3 | ||
Illustrate the cracked screen of a phone after it hit the ground. | <think> The user wants to show a phone with a cracked screen after hitting the ground.
1. **Identify the phone screen:** Locate the phone in the original image and specifically target its display area.
2. **Generate crack patterns:** Create realistic glass crack patterns. These should include a central impact point (... | Casual & Logical | 5 | 5 | 5 | 5 | ||
Add a tangent line where the function has a local maximum. | <think>
The user wants to add a tangent line to the given function at its local maximum.
1. **Locate the local maximum:** Identify the highest point on the curve, which is the local maximum.
2. **Determine the tangent line's properties:** At a local maximum of a differentiable function, the tangent line is horizontal... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Draw refracted rays bending toward the normal as they enter water from air. | <think>
The instruction requires illustrating light rays bending toward the normal when entering water from air. The provided image shows a prism, which refracts light but isn't an air-to-water interface. Therefore, I need to create a new diagram.
Here's the step-by-step plan:
1. **Establish the Interface:** Create a... | Domain Knowledge | 5 | 1 | 5 | 5 | ||
Include a Mayan astronomer using a gnomon at a stepped pyramid’s base. | <think>The user wants to add a Mayan astronomer using a gnomon at the base of the stepped pyramid.
Here's my plan:
1. **Identify the location:** The instruction specifies "at a stepped pyramid's base." The current image shows a stepped pyramid. I will place the astronomer on the flat ground in front of the pyramid.
2... | Domain Knowledge | 4 | 5 | 5 | 5 | ||
Add a titration setup including burette, stand, Erlenmeyer flask, and indicator solution. | <think>The user wants to add a complete titration setup to the existing lab image. I need to identify a suitable location in the image where this setup can be placed without obscuring important existing elements or looking out of place.
1. **Identify Placement Area:** The right side of the image, behind the green vol... | Domain Knowledge | 5 | 4 | 5 | 5 | ||
Illustrate the net force vector on a car making a banked curve turn. | <think>The user wants to illustrate the net force vector on a car making a banked curve turn.
The original image shows a car on a curved road, which appears to be banked.
Here's the plan:
1. **Identify the car:** The car is the main subject.
2. **Identify the direction of the turn:** The car is turning to the left (... | Domain Knowledge | 3 | 5 | 5 | 5 | ||
Add magnetic field lines around the coil in concentric circles. | <think>The user wants to add magnetic field lines around the coil.
I need to identify the coil in the image. It's the cylindrical object made of coiled wire.
Magnetic field lines around a current-carrying coil (solenoid) are typically represented as concentric circles *inside* the coil and then looping around the outsi... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Add a Viking with a woolen tunic and a longhouse with a thatched roof. | <think> The user wants to transform the existing house into a Viking longhouse and add a Viking character.
Here's my plan:
1. **Transform the house into a longhouse:**
* Identify the current house structure.
* Modify the roof to be a thatched roof, characteristic of a longhouse.
* Adjust the overall... | Domain Knowledge | 5 | 4 | 5 | 5 | ||
Add a toga and gladius to the Roman soldier figure. | <think>The user wants to add two specific items to the Roman soldier figure: a toga and a gladius.
Here's my plan:
1. **Add a toga:** The current figure is shirtless and wearing a short skirt-like garment. A toga is a large, draped garment. I will need to generate a toga that covers the upper body and drapes over the... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Label the nucleus and mitochondria in the plant cell diagram. | <think>The user wants me to label the nucleus and mitochondria in the provided plant cell diagram.
1. **Identify the nucleus:** The large, central, spherical organelle with a distinct inner structure (often purple/pinkish in this style) is typically the nucleus. In this image, the prominent central purple sphere with... | Domain Knowledge | 4 | 5 | 4 | 4 | ||
Add motion trajectory of a pendulum bob from its highest to lowest point. | <think> The user wants to add a motion trajectory for the pendulum bob.
This means I need to:
1. Identify the pivot point: This is where the chain attaches to the ceiling.
2. Identify the current position of the bob: It's hanging vertically, which is its lowest point.
3. Determine the highest point: This would be to on... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Replace stir plate with magnetic stirrer and add burette for titration. | <think>The user wants to modify the provided image of a chemistry lab.
I need to perform two main edits:
1. **Replace "stir plate" with "magnetic stirrer"**: The current image doesn't explicitly show a stir plate. I should interpret this as adding a magnetic stirrer setup where a stir plate would typically be used, li... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Indicate the hepatic portal vein pathway from the intestine to the liver. | <think> The user wants to highlight the hepatic portal vein pathway from the intestine to the liver.
Here's my plan:
1. **Identify the relevant organs:** Intestine (small and large) and Liver.
2. **Locate the hepatic portal vein:** This vein is not explicitly colored or labeled in the original image, but its general... | Domain Knowledge | 5 | 5 | 5 | 3 | ||
Draw and label major climate zones: tropical, arid, temperate, and polar. | <think>The user wants to visualize four major climate zones: tropical, arid, temperate, and polar, on the provided world map.
Here's the plan:
1. **Identify geographical areas for each zone:**
* **Tropical:** Equator to roughly 23.5° N/S (Tropic of Cancer/Capricorn).
* **Arid:** Primarily around 30° N/S l... | Domain Knowledge | 4 | 5 | 5 | 5 | ||
Indicate prevailing wind directions with curved arrows near the poles. | <think>The user wants to add curved arrows near the poles to indicate prevailing wind directions.
Here's a plan:
1. **Identify the poles:** The North Pole is at the top center (around Greenland/Arctic Ocean) and the South Pole is at the bottom center (Antarctica).
2. **Determine prevailing wind directions near the p... | Domain Knowledge | 4 | 5 | 2 | 2 | ||
Add a tangent line at x = 2 to the graph of f(x). | <think> The user wants to add a tangent line to the given graph at x = 2.
Here's my plan:
1. **Identify the function:** The graph appears to be a parabola, specifically y = x^2 - 4. Let's verify this. The vertex is at (0, -4). At x=2, y = 2^2 - 4 = 0. At x=-2, y = (-2)^2 - 4 = 0. This matches the graph.
2. **Find th... | Domain Knowledge | 3 | 4 | 3 | 5 | ||
Include a trophic level label for "secondary consumers" in the energy pyramid. | <think>The user wants to add a trophic level label for "secondary consumers" to the energy pyramid.
Looking at the image, the top tier of the pyramid is already labeled "Secondary Consumers".
The instruction is to "Include a trophic level label for 'secondary consumers'".
Since the label is already present, no modifica... | Domain Knowledge | 3 | 5 | 5 | 5 | ||
Show a colorless solution turning purple as starch reacts with iodine solution. | <think>The user wants to show a chemical reaction: a colorless solution (starch) turning purple when iodine is added.
Here's the plan:
1. **Identify the starch solution:** The graduated cylinder contains a clear, colorless liquid, which can represent the starch solution.
2. **Identify the iodine solution:** The smal... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Show current arrows splitting at the junction in the parallel circuit. | <think>The user wants to add current arrows to the parallel circuit, specifically showing the current splitting at the junction.
Here's a step-by-step plan:
1. **Identify the current source:** The batteries on the left. Current flows from the positive terminal (red wire) to the negative terminal (black wire) in a con... | Domain Knowledge | 5 | 5 | 5 | 4 | ||
Replace horse-drawn carriages with automobiles in a 1910 London market scene. | <think>The user wants to replace all horse-drawn carriages with automobiles in a 1910 London market scene.
Here's my plan:
1. **Identify all horse-drawn carriages:** Carefully scan the entire image to locate every instance of a horse-drawn carriage. This includes those in the foreground, mid-ground, and background, e... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Draw the solution after mixing copper(II) sulfate with excess ammonia. | <think>The user wants to see the result of mixing copper(II) sulfate with excess ammonia.
1. **Identify the initial state:** The image shows a beaker with a light blue solution, labeled "Copper(II) Sulfate". This is the starting material.
2. **Recall the chemical reaction:** When copper(II) sulfate (CuSO₄) reacts wit... | Domain Knowledge | 4 | 5 | 5 | 5 | ||
Apply a 90° clockwise rotation to triangle LMN about point L. | <think>
The user wants to rotate the triangle LMN 90° clockwise around point L.
Here's the step-by-step plan:
1. **Identify the pivot point:** Point L. This point will remain fixed in its original position.
2. **Rotate point N:** Point N is to the right of L, forming a horizontal segment LN. A 90° clockwise rotation... | Domain Knowledge | 5 | 3 | 5 | 5 | ||
Insert a distillation apparatus with a round-bottom flask, condenser, and collection beaker on the lab bench. | <think> The user wants to add a distillation apparatus to the lab bench.
I need to identify a suitable clear area on the lab bench where the apparatus can be placed without obscuring existing important elements or looking too cluttered.
The area to the left of the large round-bottom flask and in front of the burette st... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Depict Hadley, Ferrel, and Polar cells with clear atmospheric circulation arrows. | <think>The user wants to add atmospheric circulation cells (Hadley, Ferrel, Polar) to the world map. This requires drawing arrows to represent the air movement.
Here's a plan:
1. **Identify the zones:**
* Hadley cells: Approximately 0° to 30° latitude (North and South).
* Ferrel cells: Approximately 30° t... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Illustrate a diverging lens diagram with parallel rays spreading from the focal point. | <think>The user wants a diverging lens diagram. The current image shows a magnifying glass, which is a converging lens. I need to transform this into a diverging lens diagram.
Here's the plan:
1. **Change the lens type:** The current lens appears converging. I need to visually represent a diverging lens. This can be ... | Domain Knowledge | 5 | 1 | 5 | 4 | ||
Add elevation markers at every contour intersection with the cross-section line. | <think>The user wants to add elevation markers to the image.
However, the original image is a realistic landscape photo, not a topographic map. It does not have visible contour lines or a defined cross-section line.
Therefore, it's impossible to literally "add elevation markers at every contour intersection with the cr... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Change the triangle to show the inscribed circle centered at the incenter. | <think> The user wants to add an inscribed circle to the existing triangle.
An inscribed circle is tangent to all three sides of the triangle, and its center is the incenter.
Here's the plan:
1. **Identify the triangle:** The image shows a black outline of an equilateral triangle on a white background.
2. **Determin... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Draw copper wire in silver nitrate solution showing silver metal deposition and blue solution. | <think>The user wants to depict a chemical reaction: copper wire in silver nitrate solution.
I need to modify the existing image to show the results of this reaction.
Here's a step-by-step plan:
1. **Identify the key elements to change:**
* The clear solution in the beaker needs to turn blue.
* The copper... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Draw the median lines intersecting at the centroid of the triangle. | <think> The user wants me to draw the median lines of the triangle and mark their intersection point, which is the centroid.
Here's the plan:
1. **Identify the vertices of the triangle.** Let's label them A, B, C.
2. **Find the midpoint of each side.**
* Midpoint of side AB (let's call it M_AB).
* Midpoi... | Domain Knowledge | 5 | 3 | 5 | 5 | ||
Show a factory replacing a 18th-century farmhouse after the Industrial Revolution. | <think>The user wants to replace the 18th-century farmhouse with a factory, symbolizing the Industrial Revolution.
Here's my plan:
1. **Identify the main subject:** The 18th-century farmhouse in the center of the image.
2. **Determine the replacement:** A factory building. This factory should look like it belongs to... | Domain Knowledge | 5 | 2 | 5 | 5 | ||
Add force arrows for gravity, thrust, and air resistance on a rocket during ascent. | <think>The user wants to add force arrows to the rocket during ascent. I need to identify the three forces: gravity, thrust, and air resistance, and draw arrows representing their direction and approximate point of application.
1. **Gravity:** Acts downwards, from the center of mass of the rocket. I will draw a downw... | Domain Knowledge | 5 | 5 | 5 | 4 | ||
Highlight the digestive system organs in yellow with labeled pathways. | <think>The user wants to highlight the digestive system organs in yellow and label the pathways.
Here's my plan:
1. **Identify all digestive organs:** Esophagus, stomach, small intestine, large intestine. The liver is also part of the digestive system (produces bile), but the instruction specifically asks for "organs... | Domain Knowledge | 3 | 5 | 4 | 3 | ||
Draw contour lines at 50m intervals, starting from 100m elevation. | <think>The user wants contour lines drawn on the mountainous landscape.
I need to identify the general elevation changes in the image. The river is likely the lowest point.
The instruction specifies 50m intervals, starting from 100m elevation.
I will assume the river's surface is approximately 50m elevation for referen... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Construct the perpendicular bisector of segment AB using only a compass and straightedge. | <think>
The user wants to construct the perpendicular bisector of segment AB using compass and straightedge.
Here's the plan:
1. **Draw segment AB:** Connect points A and B with a straight line segment.
2. **Draw arcs from A:** Place the compass point on A. Set the compass radius to be greater than half the length of... | Domain Knowledge | 4 | 5 | 5 | 5 | ||
Place a safety shield between the distillation apparatus and the work area. | <think>The user wants to add a safety shield to the image.
I need to identify the "distillation apparatus" and the "work area".
Looking at the image, there isn't a clear, complete distillation apparatus visible. However, there are several beakers and flasks, some with liquids, on the workbench. The instruction implies ... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Modify contour lines to show accurate pass between two 1000m peaks. | <think>The user wants to modify the contour lines in the image.
The current white line represents a path or a valley, but it's not explicitly contour lines.
The instruction asks to "Modify contour lines to show accurate pass between two 1000m peaks."
This implies that the existing white line is *intended* to represent ... | Domain Knowledge | 3 | 5 | 3 | 5 | ||
Annotate myelin sheath and axon terminals in the neuron diagram. | <think>
The user wants to annotate two specific parts of the neuron diagram: "myelin sheath" and "axon terminals".
1. **Identify Myelin Sheath:** The myelin sheath is the segmented insulation around the axon. In the provided image, the long projection (axon) extending from the main cell body has distinct, slightly da... | Domain Knowledge | 3 | 5 | 4 | 4 | ||
Add a Roman centurion in a gilded lorica segmentata near a marble forum column. | <think>The user wants to add a Roman centurion to the image.
I need to place the centurion near one of the marble forum columns.
The instruction specifies "gilded lorica segmentata," so the armor should have a golden appearance.
Here's the plan:
1. **Identify placement:** The left column or the right column would wor... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Ensure condenser tubing is connected and clamped securely in distillation assembly. | <think>The user wants to ensure the condenser tubing is connected and clamped securely in the distillation assembly.
1. **Identify the distillation assembly:** Locate the glassware setup that resembles a distillation apparatus. In the image, there's a vertical glass tube (condenser) held by clamps, with tubing connec... | Domain Knowledge | 5 | 5 | 5 | 4 | ||
Replace French flag with the tricolor of the First Republic in the 1792 battle scene. | <think>The user wants to replace the current French flag (blue, white, red vertical stripes) with the tricolor of the First Republic from 1792.
1. **Identify the current flag:** The flag in the image is a vertical blue, white, red tricolor, which is the modern French flag.
2. **Research the 1792 First Republic flag:... | Domain Knowledge | 4 | 5 | 1 | 1 | ||
Replace modern furniture with a Victorian-era writing desk and armchair. | <think>The user wants to replace the modern office furniture with Victorian-era equivalents.
Here's a plan:
1. **Identify target objects for replacement:** The main objects are the large modern desk, the office chair the person is sitting on, and the two additional office chairs. The computer monitor is also modern a... | Domain Knowledge | 5 | 3 | 5 | 4 | ||
Illustrate the fizzing and color change of vinegar and baking soda reaction producing carbon dioxide. | <think>The user wants to illustrate the reaction between vinegar and baking soda, specifically showing fizzing and a color change, and the production of carbon dioxide.
Here's a step-by-step plan:
1. **Combine the reactants:** The current image shows vinegar and baking soda in separate containers. I need to show them... | Domain Knowledge | 5 | 3 | 5 | 4 | ||
Add an inscribed circle tangent to all three sides of triangle PQR. | <think>
1. **Analyze the input:** The image shows a black outline of a triangle PQR on a white background. The triangle appears to be equilateral or close to it.
2. **Understand the request:** Add an "inscribed circle tangent to all three sides of triangle PQR." This means drawing a circle inside the triangle that to... | Domain Knowledge | 5 | 5 | 5 | 5 | ||
Show elevation profile from point A to point B, every 100m. | <think>The user wants an elevation profile from point A to point B, marked every 100m. This is a complex request as it requires generating data that is not present in the image. I cannot actually calculate elevation from a 2D image.
Therefore, I need to *simulate* this by:
1. **Defining a path:** I will choose a path... | Domain Knowledge | 5 | 5 | 5 | 5 |
End of preview. Expand in Data Studio
No dataset card yet
- Downloads last month
- 2