prompt string | completion string |
|---|---|
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Based on the provided description, the JSON should contain the following components for each part:
part_1:
coordinate_system:
Euler Angles: [0.0, 0.0, 0.0]
Translation Vector: [0.0, 0.0, 0.0]
sketch:
face_1:
loop_1:
line_1: Start Point: [0.0, 0.0], End Point: [0.75, 0.0]
line_2: Start Point: [0.75, 0.0... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có bốn phần được gắn nhãn "part_1", "part_2", "part_3", "part_4".
part_1: (Hình lăng trụ chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Vector: [0.0, 0.069, 0.0]
-sketch:
--f... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1: Infer the components that will be in the json based on the provided description:**
parts: The description outlines two distinct parts: "part_1" representing a rectangular prism with a flat top and bottom, and "part_2" representing a rectangular prism with a triangular base. Thus, the json should cont... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có 8 phần được gắn nhãn "part_1", "part_2", "part_3", "part_4", "part_5", "part_6", "part_7", "part_8"
part_1: (Hình lăng trụ chữ nhật dài, mỏng)
-coordinate_system:
--Euler Angles: [-90.0, 0.0, -90.0]
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyze the description and identify the key components for the JSON structure.
The description outlines the creation of a CAD model in two parts:
Part 1: Cylindrical Object with Two Holes
- coordinate_system: Euler Angles, Translation Vector
- sketch: Face with three loops (circles)
- extrusion... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một thanh kim loại hình chữ nhật có lỗ ở trung tâm. Điều này sẽ được phản ánh trong json như "part_1".
part_1: (Thanh kim loại hình chữ nhật có lỗ ở tru... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Breakdown of the JSON structure based on the description.
The JSON represents a CAD model construction process, composed of 5 distinct parts. Each part involves:
1. Coordinate System: Defined by Euler Angles and a Translation Vector. These parameters position and orient the sketch for the current oper... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong JSON dựa trên mô tả được cung cấp:
parts: Mô tả cho thấy có hai phần, "part_1" và "part_2", mỗi phần mô tả một lăng trụ chữ nhật.
part_1: (Lăng trụ chữ nhật đầu tiên)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Suy ra từ mô tả: "góc Euler được đặt là (0.... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts:
-part_1:
--coordinate_system:
---Euler Angles: [0.0, 0.0, 0.0]
---Translation Vector: [0.0, 0.0, 0.0]
--sketch:
---face_1:
----loop_1:
-----line_1: Start [0.0, 0.0], End [0.5, 0.0]
-----line_2: Start [0.5, 0.0], End... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>\n"
reasoning += "***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:\n\n"
# Part 1 Reasoning
reasoning += "parts: Từ mô tả, chúng ta có ba phần được gắn nhãn 'part_1', 'part_2', và 'part_3', mỗi phần mô tả một lăng trụ hình chữ nhật ba chiều. Điều này sẽ được phản ánh ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts: The description outlines four distinct parts: "part_1" (a cylindrical object), "part_2" (another cylindrical object), "part_3" (a third cylindrical object), and "part_4" (a rectangular prism with a sloped side).
pa... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một vật hình trụ có đỉnh và đáy thon. Điều này sẽ được phản ánh trong json như "part_1".
part_1: (Vật hình trụ có đỉnh và đáy thon)
-coordinate_system:
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Components in the JSON based on the description:
parts: The JSON describes two parts, a rectangular metal bracket ("part_1") and a rectangular prism ("part_2").
part_1 (Rectangular Metal Bracket):
coordinate_system:
Euler Angles: [0.0, 0.0, -90.0]
Translation Vector: [0.0, 0.1094, 0.0]
sketch:
face_1:... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1", "part_2" và "part_3".
part_1: (Hình trụ phẳng)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.0, 0.0]
-sketch:
--face_1:
---loop_1:
---... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1:** Infer the components that will be in the json based on the provided description:
* parts: There is a single part, "part_1," representing the triangular prism.
* part\_1:
* coordinate\_system:
* Euler Angles: \[0.0, 0.0, 0.0] (Explicitly stated in the description).
* Tr... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần được gắn nhãn "part_1" mô tả một khối lăng trụ chữ nhật có mặt dốc và "part_2" mô tả một vật thể kim loại hình chữ nhật dài có đầu thon nhọn. Điều này sẽ được phản ánh trong json như "part_1"... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyzing the description and mapping it to the JSON structure:
Part 1: Tapered Rectangular Prism
coordinate_system:
Euler Angles: [0.0, 0.0, -90.0]
Translation Vector: [0.0, 0.1875, 0.0]
sketch:
face_1:
loop_1:
line_1: Start Point: [0.0, 0.0], End Point: [0.75, 0.0]
line_2: Start Point: [0.75, 0.0],... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có bốn phần: "part_1" (khối lăng trụ chữ nhật), "part_2" (vật thể hình trụ), "part_3" (vật thể hình trụ), và "part_4" (mô hình CAD của một chiếc nhẫn).
part_1: (khối lăng trụ chữ nhật)
-coordinate_syste... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Reason out the components that will be in the JSON based on the given description.
parts: The description describes two parts: "part_1" which is a "Three-Dimensional Rectangular Prism with a Flat Top and Bottom", and "part_2" which is a "Rectangular Prism with Tapered Middle Section".
part_1: (Three-D... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần: "part_1" mô tả khối lăng trụ chữ nhật có cạnh trên cong, "part_2" mô tả lỗ hình trụ ở giữa và "part_3" mô tả đế hình trụ.
part_1: (Khối lăng trụ chữ nhật có cạnh trên cong)
-coordinate_system:
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1: Infer the components that will be in the json based on the provided description:**
parts: From the description, we have a single part labeled "part_1". This will be reflected in the JSON as "part_1".
part_1:
- coordinate_system:
-- Euler Angles: [0.0, 0.0, 0.0] (From "Euler Angles: [0.0, 0.0, 0.0]... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
parts: Dựa trên mô tả, chúng ta có ba phần: "part_1" mô tả một khối lăng trụ chữ nhật, "part_2" mô tả một khối lăng trụ chữ nhật bị cắt, và "part_3" mô tả một lỗ hình trụ bị cắt.
part_1: (Khối lăng trụ chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Từ mô tả).
--Translation Vector: [0.0,... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts: The description details three parts: a rectangular prism with rounded corners (part_1), a cylindrical object (part_2), and a rectangular prism with a cylindrical hole (part_3).
part_1 (Rectangular Prism with Rounde... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1" (khối lăng trụ chữ nhật), "part_2" (hình trụ thon trên và dưới), và "part_3" (hình trụ thon trên, phẳng dưới). Điều này sẽ được phản ánh trong json như "part_1", "part_2", ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description.
parts: The description outlines two distinct parts: "part_1" (a rectangular metal bracket with two holes) and "part_2" (a rectangular prism with a tapered middle section). The JSON structure reflects this division.
part_1... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một khối lăng trụ chữ nhật ba chiều, kim loại, có lỗ hình trụ. Điều này sẽ được phản ánh trong json như "part_1".
part_1: (Khối lăng trụ chữ nhật ba chi... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Deconstruct the description to match the JSON format.
The description outlines the creation of a 2D sketch with 7 faces, each containing a single loop. Each loop is composed of arcs and lines defined by their start, mid, and end points. The coordinate system is also defined. The description also include... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
Phần 1:
- coordinate_system:
-- Euler Angles: [0.0, 0.0, 0.0]
-- Translation Vector: [0.0, 0.0, 0.0]
- sketch:
-- face_1:
--- loop_1:
---- line_1: Start [0.0, 0.1264], End [0.1048, 0.0324]
---- line_2: Start [0.1048, 0.0324], End [0.239, 0.0]
---- line_3: Start [0.239, 0.0], End [0.... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts: From the description, we have a single part labeled "part_1" describing a rectangular prism with a cylindrical hole. This will be reflected in the json as "part_1."
part_1: (Rectangular Prism with Cylindrical Hole)... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
parts: Từ mô tả, chúng ta có hai phần: "part_1" mô tả tấm kim loại hình chữ nhật có bốn lỗ và "part_2" mô tả lăng trụ chữ nhật có lỗ hình trụ.
part_1: (Tấm kim loại hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Suy ra từ mô tả: "Góc Euler: [0.0, 0.0, 0.0]").
--Translation Vector: ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Components to be in JSON:
parts: There is a single part, "part_1", which represents a rectangular prism with a cylindrical hole.
part_1:
coordinate_system:
Euler Angles: [0.0, 0.0, 0.0] (From the description).
Translation Vector: [0.0, 0.0, 0.0] (From the description).
sketch: Contains the 2D sketch in... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần: "part_1" mô tả một lăng trụ hình chữ nhật và "part_2" mô tả một vật thể hình trụ hơi côn.
part_1: (Lăng trụ hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translatio... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts: The description outlines two parts: "part_1" which is a rectangular prism with a curved top edge and "part_2" which is a long, thin, rectangular prism with a flat top and bottom, slightly tapered towards the ends.
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần riêng biệt được gắn nhãn "part_1", "part_2" và "part_3" mô tả hình trụ với các tính năng khác nhau. Điều này sẽ được phản ánh trong json như "part_1", "part_2" và "part_3".
part_1: (Hình trụ ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyze the JSON structure and the description to identify the key components for each part.
Part 1:
- coordinate_system: Euler Angles, Translation Vector
- sketch: face_1, loop_1, lines (line_1 to line_4)
- extrusion: extrude_depth_towards_normal, extrude_depth_opposite_normal, sketch_scale, operation
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:**
*parts*: Mô tả bao gồm hai phần khác nhau, một hình trụ (part_1) và một hình dạng cong, hình nón (part_2).
*part_1* (Hình trụ):
*coordinate_system*:
*Euler Angles*: [0.0, 0.0, 0.0]
*Translation Vector*: [-0.0... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts: From the description, we have a single part labeled "part_1" describing a CAD model resembling a stylized letter "T". This will be reflected in the json as "part_1".
part_1: (Stylized T)
-coordinate_system:
--Euler... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần duy nhất được gắn nhãn "part_1", "part_2" và "part_3".
part_1: (Hình trụ dài có hình dạng hơi côn)
-coordinate_system:
--Euler Angles: [-90.0, 0.0, -90.0]
--Translation Vector: [0.0214, 0.0074... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Reason out the components that will be in the JSON based on the given description:
parts:From the description, we have three parts labeled "part_1", "part_2", and "part_3".
part_1: (Rectangular prism with a rectangular cutout)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Vector:... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1".
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Suy ra từ mô tả: "* Góc Euler: [0.0, 0.0, 0.0]").
--Translation Vector: [0.0, 0.0, 0.0] (Suy ra ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyze the provided description and JSON to identify the components and their corresponding values:
parts: The overall structure contains a single part named "part_1".
part_1:
coordinate_system:
Euler Angles: [0.0, 0.0, 0.0]
Translation Vector: [0.0, 0.035, 0.0]
sketch:
face_1:
loop_1: Contains line a... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một giá đỡ kim loại hình chữ nhật. Điều này sẽ được phản ánh trong json như "part_1".
part_1: (Giá đỡ kim loại hình chữ nhật)
-coordinate_system:
--Eule... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyze the components that should be present in the JSON based on the description.
part_1: Rectangular Prism with Curved Top
- coordinate_system: Euler Angles [0.0, 0.0, 0.0], Translation Vector [0.0, 0.0, 0.0]
- sketch: face_1, loop_1 containing 12 lines with given start and end points.
- extru... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong JSON dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần được gắn nhãn "part_1" và "part_2". "part_1" mô tả việc tạo các hình tròn và đùn chúng, trong khi "part_2" mô tả một quá trình tương tự với các thông số khác nhau.
part_1: (Vật có hình tròn ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Breakdown the JSON components based on the description.
part_1:
- coordinate_system:
- Euler Angles: [0.0, 0.0, 0.0]
- Translation Vector: [0.0, 0.0, 0.0]
- sketch:
- face_1:
- loop_1:
- line_1: Start Point [0.0, 0.0188], End Point [0.0187, 0.0188]
- line_2: ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:**
* **parts:** Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một lăng trụ chữ nhật với một phần cắt hình tam giác. Điều này sẽ được phản ánh trong json như "part_1".
* **part_1:** (Lăng trụ chữ nhật với ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1: Infer the components that will be in the JSON based on the provided description:**
parts:
From the description, we have a single part labeled "part_1".
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Vector: [0.0, 0.04, 0.0]
-sketch:
--face_1:
---loop_1:
----line_1: Start... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1", "part_2" và "part_3", mỗi phần mô tả một lăng trụ hình chữ nhật ba chiều. Điều này sẽ được phản ánh trong json như "part_1", "part_2" và "part_3".
part_1: (Lăng trụ hình ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Step 1: Infer the components that will be in the JSON based on the provided description:
parts: From the description, we have a single part labeled "part_1" describing a long, thin, rectangular object with a slightly tapered end. This will be reflected in the json as "part_1".
part_1: (Long Thin Rectangula... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần riêng biệt được gắn nhãn "part_1", "part_2", và "part_3".
part_1: (Lăng kính hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Suy ra từ mô tả: "góc euler 0.0, 0.0, 0.0").
--Tr... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts:
-part_1: (Base Rectangular Prism)
--coordinate_system:
---Euler Angles: [0.0, 0.0, 0.0]
---Translation Vector: [0.0, 0.0, 0.0]
--sketch:
---face_1:
----loop_1:
-----line_1: Start [0.0, 0.0], End [0.6713, 0.0]
-----l... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
parts: Từ mô tả, chúng ta có hai phần. Phần đầu tiên được gắn nhãn "part_1" mô tả một lăng kính hình chữ nhật ba chiều, phần thứ hai được gắn nhãn "part_2" mô tả một lăng kính hình chữ nhật ba chiều đã được sửa đổi.
part_1: (Lăng trụ hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0] ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Based on the description, the JSON structure can be inferred as follows:
-parts: Contains all parts of the design. In this case, only "part_1".
--part_1: Represents the long, thin metallic object.
---coordinate_system:
----Euler Angles: [-90.0, 0.0, -90.0]
----Translation Vector: [0.0, 0.0, 0.0]
---ske... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
Dựa trên mô tả, tôi suy luận ra các thành phần sau trong JSON:
parts: Phần này sẽ chứa tất cả các phần của mô hình. Trong trường hợp này, chúng ta chỉ có một phần, "part_1".
part_1: Phần này mô tả hình hộp chữ nhật.
coordinate_system: Xác định hệ tọa độ của phần.
-Euler Angles: [0.0, 0.0, 0.0]
-Transla... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1: Infer the components that will be in the JSON based on the provided description:**
parts: From the description, we have four parts labeled "part_1", "part_2", "part_3", and "part_4".
part_1 (Rectangular prism with flat top/bottom and sloped side):
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần riêng biệt được gắn nhãn "part_1" (lăng trụ chữ nhật), "part_2" (hình trụ thuôn) và "part_3" (ống).
part_1: (Lăng trụ chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translati... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1**: Deconstruct the JSON and description into their components to check for a match.
* **Part 1:**
* `coordinate_system`:
* `Euler Angles`: \[0.0, 0.0, 0.0]
* `Translation Vector`: \[0.3869, 0.0334, 0.0048]
* `sketch`:
* `face_1`:
* `loop_1`: Co... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần, được gắn nhãn "part_1" và "part_2".
part_1: (Khối lăng trụ chữ nhật cơ sở)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.0, 0.0]
-sketch:
--face_1:
---lo... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1: Infer the components that will be in the JSON based on the provided description:**
The JSON contains two parts: `part_1` and `part_2`.
* **part\_1:** Represents a rectangular prism with a flat top and bottom.
* **coordinate\_system:**
* `Euler Angles`: \[0.0, 0.0, 0.0]
* ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1", "part_2" và "part_3".
part_1: (Lăng trụ hình chữ nhật với mặt cong)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.0, 0.0]
-sketch:
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts: From the description, we have a single part labeled "part_1" describing a long, thin, metallic object. This will be reflected in the json as "part_1".
part_1: (Long, thin, metallic object with a slightly curved sha... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần được gắn nhãn "part_1" mô tả một hình hộp chữ nhật ba chiều có góc bo tròn và "part_2" mô tả một vật thể hình trụ có đỉnh và đáy phẳng. Điều này sẽ được phản ánh trong json như "part_1" và "p... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1: Infer the components that will be in the json based on the provided description:**
parts: From the description, there are three parts: "part_1", "part_2", and "part_3".
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.125, 0.0]
-sketch:
--face_1:
---loop_1:
-... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1", "part_2", và "part_3".
part_1: (Hình trụ dài, có đầu hơi côn)
-coordinate_system:
--Euler Angles: [-90.0, 0.0, -90.0]
--Translation Vector: [0.0214, 0.0074, 0.0043]
-s... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts: From the description, we have a single part labeled "part_1" describing a CAD model of a circular object with a central hole. This will be reflected in the json as "part_1".
part_1: (CAD model of a circular object)
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần được gắn nhãn "part_1" và "part_2". "part_1" mô tả một vật thể ba chiều, hình chữ nhật, có đáy phẳng và hai lỗ hình trụ trên bề mặt trên. "part_2" mô tả một vật thể hình trụ có đỉnh và đáy hơ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts: The description outlines two distinct parts: "part_1" which describes a rectangular prism with a cylindrical hole and "part_2" describing a rectangular prism with a flat top and bottom, and a curved side.
part_1: (... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần.
part_1: (Lăng trụ hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.0, 0.0]
-sketch:
--face_1:
---loop_1:
----line_1: Start [0.0, 0.0], End [0.7... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the given description:
parts: The description outlines four distinct parts (part_1, part_2, part_3, and part_4), each detailing the creation of a rectangular section using coordinate systems, sketches, and extrusions.
part_1:
coordinate_system: Eu... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một lăng trụ chữ nhật ba chiều với một phần cắt hình tam giác trên một mặt. Điều này sẽ được phản ánh trong json như "part_1".
part_1: (Hình lăng trụ ch... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Step 1: Infer the components that will be in the JSON based on the provided description:
parts:From the description, we have two parts labeled "part_1" and "part_2". This will be reflected in the json.
part_1: (Prism with a pointed end)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Ve... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần:
-part_1: Vật thể hình trụ có mặt trên và mặt dưới phẳng
-part_2: Lăng trụ chữ nhật có lỗ hình trụ
-part_3: Vật thể hình trụ có đỉnh côn
part_1: (Vật thể hình trụ có mặt trên và mặt dưới phẳng)
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts:From the description, we have a single part labeled "part_1" describing a long, rectangular, metallic object with a tapered end. This will be reflected in the json as "part_1".
part_1: (Long, Rectangular, Metallic O... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một tấm kim loại phẳng, hình chữ nhật với đầu cong, nhọn. Điều này sẽ được phản ánh trong json như "part_1".
part_1: (Tấm Kim Loại Phẳng, Hình Chữ Nhật ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Step 1: Infer the components that will be in the json based on the provided description:
parts:From the description, we have two parts labeled "part_1" and "part_2". "part_1" describes the construction of a rectangular prism, while "part_2" describes another rectangular prism placed on top of it. These will... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
parts: Dựa trên mô tả, chúng ta có ba phần: part_1 (khối lăng trụ chữ nhật với mặt cong), part_2 (khối lăng trụ chữ nhật) và part_3 (khối lăng trụ chữ nhật với mặt dốc).
part_1:
- coordinate_system:
-- Euler Angles: [0.0, 0.0, 0.0]
-- Translation Vector: [0.01, 0.01, 0.0]
- sketch:
-- face_1:
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyzing the description to map it into the JSON structure.
Part 1: Cylindrical object with three holes
coordinate_system: Euler angles (0.0, 0.0, 0.0), Translation Vector [0.25, 0.0, 0.0438]
sketch: Two faces.
face_1: loop_1 (line, arc, line, arc), loop_2 (circle)
line: [0.25, 0.0] to [0.25, 0.2312... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần. "part_1" mô tả một khối lăng trụ chữ nhật với mặt trên và mặt dưới phẳng, và mặt trước hơi nghiêng. "part_2" mô tả một khối lăng trụ chữ nhật với mặt trên và mặt dưới cong.
part_1: (Khối lă... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Step 1: Infer the components that will be in the json based on the provided description:
parts: From the description, we have a single part labeled "part_1" describing a rectangular prism with curved top and bottom. This will be reflected in the json as "part_1".
part_1:
- coordinate_system:
-- Euler Ang... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần được gắn nhãn "part_1" và "part_2".
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.0, 0.0]
-sketch:
--face_1:
---loop_1:
----line_1: Start [0.0, 0.... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
**Step 1:** Infer the components that will be in the JSON based on the provided description:
parts:
From the description, there are 5 parts: part_1, part_2, part_3, part_4 and part_5.
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: [0.0, 0.0, 0.0]
-sketch:
--face_1:
---loop_1... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1:
Dựa trên mô tả, JSON chứa thông tin về 5 phần khác nhau (part_1 đến part_5) và một mô tả về hình dạng cuối cùng. Mỗi phần chứa thông tin về hệ tọa độ, phác thảo và đùn.
part_1:
- coordinate_system:
- Euler Angles: [0.0, 0.0, 0.0]
- Translation Vector: [0.0, 0.0223, 0.0488]
- sketch:
- face_1:
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts: From the description, we have a single part labeled "part_1".
part_1:
- coordinate_system:
-- Euler Angles: [0.0, 0.0, -90.0]
-- Translation Vector: [0.0, 0.0171, 0.0]
- sketch:
-- face_1:
--- loop_1:
... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1", "part_2", "part_3".
part_1: (Lăng kính hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Từ mô tả: "Đặt góc Euler thành [0.0, 0.0, 0.0]").
--Translati... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Breakdown of the JSON structure based on the description.
parts: This top-level key contains all the individual parts of the CAD model. In this case, we have three parts: part_1, part_2, and part_3.
part_1: (Cylindrical Object)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0]
--Translation Vector: ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần: "part_1" mô tả một vật thể hình trụ có đầu hơi thon và "part_2" mô tả một vật thể kim loại dài, mỏng, có đầu nhọn.
part_1: (Vật thể hình trụ có đầu hơi thon)
-coordinate_system:
--Euler Angles... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Breakdown the JSON structure based on the provided description.
Part 1: Rectangular Prism with Cylindrical Hole
coordinate_system: Euler Angles [0.0, 0.0, 0.0], Translation Vector [0.0, 0.0, 0.0]
sketch:
face_1: loop_1: lines (12 lines with start and end points)
extrusion: extrude_depth_towards_normal... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần được gắn nhãn "part_1" và "part_2".
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Vector: [0.0, 0.0676, 0.0]
-sketch:
--face_1:
---loop_1:
----line_1: Start [0.0, ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyze the components that will be present in the JSON based on the cleaned description.
parts: This JSON contains one part labeled as "part_1" representing the entire long thin rectangular prism.
part_1:
coordinate_system:
Euler Angles: [0.0, 0.0, -90.0] (From the description: "Euler Angl... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần: "part_1" mô tả một lăng trụ chữ nhật ba chiều và "part_2" mô tả một lăng trụ chữ nhật có lỗ hình trụ.
part_1: (Lăng trụ chữ nhật ba chiều)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts: There are two parts described: "part_1" resembling a stylized letter 'S', and "part_2" resembling a cylindrical object.
part_1: ('S' Shape)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Vector... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Mô tả cho biết có hai phần, part_1 (Lăng trụ chữ nhật với hình cắt tam giác) và part_2 (Lăng trụ chữ nhật với lỗ trụ).
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Suy ra từ "Góc Euler: [0.0, 0.0, 0.0]").
-... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Analyze the Description and JSON to determine expected components.
The description outlines four distinct parts (part_1, part_2, part_3, and part_4) each involving coordinate systems, sketches with geometric primitives (lines, circles, arcs, rectangles) and extrusion operations. The JSON represents thes... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1","part_2" và "part_3".
part_1: (Lăng trụ hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, 0.0] (Suy ra từ mô tả: "* Góc Euler: [0.0, 0.0, 0.0]").
--Translation ... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the json based on the provided description:
parts:From the description, we have a single part labeled "part_1" describing a simple, flat, rectangular metal plate with a single hole at one end. This will be reflected in the json as "part_1".
part_1: (Rectangular Met... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có hai phần: "part_1" mô tả một lăng trụ chữ nhật có lỗ trụ và "part_2" mô tả một lăng trụ chữ nhật với đỉnh và đáy hơi thon, và các mặt bên cong. Điều này sẽ được phản ánh trong json như "part_1" và "pa... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Step 1: Infer the components that will be in the JSON based on the provided description:
parts: From the description, we have three parts: "part_1", "part_2", and "part_3".
part_1:
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0]
--Translation Vector: [0.4424, 0.3865, 0.4215]
-sketch:
--face_1:
---loo... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có ba phần được gắn nhãn "part_1", "part_2" và "part_3" mô tả các lăng trụ hình chữ nhật. Điều này sẽ được phản ánh trong json như "part_1", "part_2" và "part_3".
part_1: (Lăng trụ hình chữ nhật có mặt bên... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
Step 1: Infer the components that will be in the JSON based on the provided description:
parts:From the description, we have three parts: "part_1" (rectangular prism), "part_2" (cylindrical object with a tapered end), and "part_3" (another cylindrical object with a tapered end).
part_1: (Rectangular Prism)
-c... |
<objective>
Generate a JSON file describing the sketching and extrusion steps needed to construct a 3D CAD model based on the description provided. The output should include a reasoning section within the <think> tag and the corresponding JSON in the <json> tag. Do not provide any additional text outside of the tags.
<... | <think>
***Bước 1: Suy luận các thành phần sẽ có trong json dựa trên mô tả được cung cấp:
parts: Từ mô tả, chúng ta có một phần duy nhất được gắn nhãn "part_1" mô tả một tấm kim loại hình chữ nhật phẳng có bốn lỗ.
part_1: (Tấm kim loại hình chữ nhật)
-coordinate_system:
--Euler Angles: [0.0, 0.0, -90.0] (Suy ra từ mô... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.