assemblies/964217/model_trace.jsonl

{"ts": "2026-05-27T00:24:16.152877", "phase": "phase4a_reasoning", "oem": "", "desc": "", "model": "gemini-3.5-flash", "prompt": "This is a Komatsu engineering diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.\nThe valid callout positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nHere are the parts to map:\n  1. KEY=6240-11-8970 | OEM=6240-11-8970 | COVER\n  2. KEY=6240-11-9110 | OEM=6240-11-9110 | PLATE\n  3. KEY=01010-E1020 | OEM=01010-E1020 | BOLT\n  4. KEY=01010-E1030_c4 | OEM=01010-E1030 | BOLT  - instance 1\n  5. KEY=01010-E1035 | OEM=01010-E1035 | BOLT\n  6. KEY=01643-31032_c6 | OEM=01643-31032 | WASHER  - instance 1\n  7. KEY=01010-E1030_c7 | OEM=01010-E1030 | BOLT  - instance 2\n  8. KEY=01643-31032_c8 | OEM=01643-31032 | WASHER  - instance 2\n  9. KEY=6240-11-7580 | OEM=6240-11-7580 | BRACKET\n  10. KEY=01010-E1030_c10 | OEM=01010-E1030 | BOLT  - instance 3\n  11. KEY=01643-31032_c11 | OEM=01643-31032 | WASHER  - instance 3\n  12. KEY=6240-11-7830 | OEM=6240-11-7830 | COVER\n  13. KEY=01010-E1030_c13 | OEM=01010-E1030 | BOLT  - instance 4\n  14. KEY=01643-31032_c14 | OEM=01643-31032 | WASHER  - instance 4\n  15. KEY=6240-11-8980 | OEM=6240-11-8980 | COVER\n  16. KEY=01010-E1030_c16 | OEM=01010-E1030 | BOLT  - instance 5\n  17. KEY=01643-31032_c17 | OEM=01643-31032 | WASHER  - instance 5\n\nCRITICAL: The list order has NO relation to callout numbers.\nFor EACH part, you MUST write down a structured reasoning block following this exact template:\n\nPART [KEY]:\n  - Physical appearance: [What does this component look like in its crop? e.g. bracket, hose, gear]\n  - Spatial location in diagram: [Where is it located? e.g. top-left corner, connected to engine block, etc.]\n  - Matching callout number: [Which callout number points directly to this component?]\n  - Confidence: [HIGH/MEDIUM/LOW]\n\nDo NOT skip any part. Do NOT assign list order. Complete all 17 parts.", "response": "Based on the engineering diagram and the provided parts list, here is the step-by-step identification for each part:\n\n1. **OEM 6240-11-8970** \u2192 I can see the large heat shield cover on the left side of the diagram \u2192 callout arrow **1** points here\n2. **OEM 6240-11-9110** \u2192 I can see the small plate near the top-middle of the diagram \u2192 callout arrow **2** points here\n3. **OEM 01010-E1020** \u2192 I can see the bolt securing the plate near the top-middle \u2192 callout arrow **3** points here\n4. **OEM 01010-E1030** \u2192 I can see the bolt securing the cover at the top-left \u2192 callout arrow **4** points here\n5. **OEM 01010-E1035** \u2192 I can see the bolt securing the cover at the bottom-left \u2192 callout arrow **5** points here\n6. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the bottom-left \u2192 callout arrow **6** points here\n7. **OEM 01010-E1030** \u2192 I can see the bolt securing the bracket at the top-right \u2192 callout arrow **7** points here\n8. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the top-right \u2192 callout arrow **8** points here\n9. **OEM 6240-11-7580** \u2192 I can see the bracket on the right side of the diagram \u2192 callout arrow **9** points here\n10. **OEM 01010-E1030** \u2192 I can see the bolt securing the bracket at the bottom-right \u2192 callout arrow **10** points here\n11. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the bottom-right \u2192 callout arrow **11** points here\n12. **OEM 6240-11-7830** \u2192 I can see the cover on the right side of the diagram \u2192 callout arrow **12** points here\n13. **OEM 01010-E1030** \u2192 I can see the bolt securing the cover at the top-right \u2192 callout arrow **13** points here\n14. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the top-right \u2192 callout arrow **14** points here\n15. **OEM 6240-11-8980** \u2192 I can see the cover on the bottom-right of the diagram \u2192 callout arrow **15** points here\n16. **OEM 01010-E1030** \u2192 I can see the bolt securing the cover at the bottom-right \u2192 callout arrow **16** points here\n17. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the bottom-right \u2192 callout arrow **17** points here", "extra": {"model_index": 0, "iteration": 1}}
{"ts": "2026-05-27T00:24:16.153422", "phase": "phase4a_reasoning_judge", "oem": "", "desc": "", "model": "mistral:mistral-medium-2508", "prompt": "This is a Komatsu engineering diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.\nThe valid callout positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nHere are the parts to map:\n  1. KEY=6240-11-8970 | OEM=6240-11-8970 | COVER\n  2. KEY=6240-11-9110 | OEM=6240-11-9110 | PLATE\n  3. KEY=01010-E1020 | OEM=01010-E1020 | BOLT\n  4. KEY=01010-E1030_c4 | OEM=01010-E1030 | BOLT  - instance 1\n  5. KEY=01010-E1035 | OEM=01010-E1035 | BOLT\n  6. KEY=01643-31032_c6 | OEM=01643-31032 | WASHER  - instance 1\n  7. KEY=01010-E1030_c7 | OEM=01010-E1030 | BOLT  - instance 2\n  8. KEY=01643-31032_c8 | OEM=01643-31032 | WASHER  - instance 2\n  9. KEY=6240-11-7580 | OEM=6240-11-7580 | BRACKET\n  10. KEY=01010-E1030_c10 | OEM=01010-E1030 | BOLT  - instance 3\n  11. KEY=01643-31032_c11 | OEM=01643-31032 | WASHER  - instance 3\n  12. KEY=6240-11-7830 | OEM=6240-11-7830 | COVER\n  13. KEY=01010-E1030_c13 | OEM=01010-E1030 | BOLT  - instance 4\n  14. KEY=01643-31032_c14 | OEM=01643-31032 | WASHER  - instance 4\n  15. KEY=6240-11-8980 | OEM=6240-11-8980 | COVER\n  16. KEY=01010-E1030_c16 | OEM=01010-E1030 | BOLT  - instance 5\n  17. KEY=01643-31032_c17 | OEM=01643-31032 | WASHER  - instance 5\n\nCRITICAL: The list order has NO relation to callout numbers.\nFor EACH part, you MUST write down a structured reasoning block following this exact template:\n\nPART [KEY]:\n  - Physical appearance: [What does this component look like in its crop? e.g. bracket, hose, gear]\n  - Spatial location in diagram: [Where is it located? e.g. top-left corner, connected to engine block, etc.]\n  - Matching callout number: [Which callout number points directly to this component?]\n  - Confidence: [HIGH/MEDIUM/LOW]\n\nDo NOT skip any part. Do NOT assign list order. Complete all 17 parts.", "response": "PART [KEY=6240-11-8970]:\n  - Physical appearance: This component is a square-shaped gasket/cover with rounded edges and four holes.\n  - Spatial location in diagram: Located at the top-left corner of the heat shield assembly.\n  - Matching callout number: 1\n  - Confidence: HIGH\n\nPART [KEY=6240-11-9110]:\n  - Physical appearance: This component is a flat, elongated plate with multiple holes.\n  - Spatial location in diagram: Positioned in the middle of the assembly, connecting various parts.\n  - Matching callout number: 2\n  - Confidence: HIGH\n\nPART [KEY=01010-E1020]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Located near the bottom-left corner, connected to the cylinder block.\n  - Matching callout number: 3\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c4]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the bottom-left corner, close to the cylinder block.\n  - Matching callout number: 4\n  - Confidence: HIGH\n\nPART [KEY=01010-E1035]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.\n  - Matching callout number: 5\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c6]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the bottom-left corner, associated with a bolt.\n  - Matching callout number: 6\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c7]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.\n  - Matching callout number: 7\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c8]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the top-left corner, associated with a bolt.\n  - Matching callout number: 8\n  - Confidence: HIGH\n\nPART [KEY=6240-11-7580]:\n  - Physical appearance: This component is an L-shaped bracket.\n  - Spatial location in diagram: Located near the top-right corner, connected to the heat shield.\n  - Matching callout number: 9\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c10]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the top-right corner, connected to the heat shield.\n  - Matching callout number: 10\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c11]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the top-right corner, associated with a bolt.\n  - Matching callout number: 11\n  - Confidence: HIGH\n\nPART [KEY=6240-11-7830]:\n  - Physical appearance: This component is a cover with a rectangular shape and a tab.\n  - Spatial location in diagram: Located near the bottom-left corner, connected to the heat shield.\n  - Matching callout number: 12\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c13]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the bottom-center, connected to the heat shield.\n  - Matching callout number: 13\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c14]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the bottom-center, associated with a bolt.\n  - Matching callout number: 14\n  - Confidence: HIGH\n\nPART [KEY=6240-11-8980]:\n  - Physical appearance: This component is a cover with a rectangular shape and a tab.\n  - Spatial location in diagram: Located near the bottom-right corner, connected to the air cleaner mounting.\n  - Matching callout number: 15\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c16]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the bottom-right corner, connected to the heat shield.\n  - Matching callout number: 16\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c17]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the bottom-right corner, associated with a bolt.\n  - Matching callout number: 17\n  - Confidence: HIGH", "extra": {"model_index": 1, "iteration": 1}}
{"ts": "2026-05-27T00:24:16.153575", "phase": "phase4a_reasoning", "oem": "", "desc": "", "model": "gemini-2.5-flash", "prompt": "This is a Komatsu engineering diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.\nThe valid callout positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nHere are the parts to map:\n  1. KEY=6240-11-8970 | OEM=6240-11-8970 | COVER\n  2. KEY=6240-11-9110 | OEM=6240-11-9110 | PLATE\n  3. KEY=01010-E1020 | OEM=01010-E1020 | BOLT\n  4. KEY=01010-E1030_c4 | OEM=01010-E1030 | BOLT  - instance 1\n  5. KEY=01010-E1035 | OEM=01010-E1035 | BOLT\n  6. KEY=01643-31032_c6 | OEM=01643-31032 | WASHER  - instance 1\n  7. KEY=01010-E1030_c7 | OEM=01010-E1030 | BOLT  - instance 2\n  8. KEY=01643-31032_c8 | OEM=01643-31032 | WASHER  - instance 2\n  9. KEY=6240-11-7580 | OEM=6240-11-7580 | BRACKET\n  10. KEY=01010-E1030_c10 | OEM=01010-E1030 | BOLT  - instance 3\n  11. KEY=01643-31032_c11 | OEM=01643-31032 | WASHER  - instance 3\n  12. KEY=6240-11-7830 | OEM=6240-11-7830 | COVER\n  13. KEY=01010-E1030_c13 | OEM=01010-E1030 | BOLT  - instance 4\n  14. KEY=01643-31032_c14 | OEM=01643-31032 | WASHER  - instance 4\n  15. KEY=6240-11-8980 | OEM=6240-11-8980 | COVER\n  16. KEY=01010-E1030_c16 | OEM=01010-E1030 | BOLT  - instance 5\n  17. KEY=01643-31032_c17 | OEM=01643-31032 | WASHER  - instance 5\n\nCRITICAL: The list order has NO relation to callout numbers.\nFor EACH part, you MUST write down a structured reasoning block following this exact template:\n\nPART [KEY]:\n  - Physical appearance: [What does this component look like in its crop? e.g. bracket, hose, gear]\n  - Spatial location in diagram: [Where is it located? e.g. top-left corner, connected to engine block, etc.]\n  - Matching callout number: [Which callout number points directly to this component?]\n  - Confidence: [HIGH/MEDIUM/LOW]\n\nDo NOT skip any part. Do NOT assign list order. Complete all 17 parts.", "response": "Here is the callout assignment for each part:\n\n1.  OEM 6240-11-8970 \u2192 I can see a large, L-shaped bracket with multiple holes \u2192 callout arrow 1 points here\n2.  OEM 6240-11-9110 \u2192 I can see a long, flat rectangular plate with several holes, labeled \"To Cylinder Block\" \u2192 callout arrow 2 points here\n3.  OEM 01010-E1020 \u2192 I can see a bolt securing the plate (callout 2) to another component \u2192 callout arrow 3 points here\n4.  OEM 01010-E1030 \u2192 I can see a bolt securing the plate (callout 2) to another component \u2192 callout arrow 4 points here\n5.  OEM 01010-E1035 \u2192 I can see a bolt securing the large L-shaped bracket (callout 1) to another component \u2192 callout arrow 5 points here\n6.  OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 4) \u2192 callout arrow 6 points here\n7.  OEM 01010-E1030 \u2192 I can see a bolt securing the large L-shaped bracket (callout 1) \u2192 callout arrow 7 points here\n8.  OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 7) \u2192 callout arrow 8 points here\n9.  OEM 6240-11-7580 \u2192 I can see a small, L-shaped bracket with two holes, attached to the top right of the main assembly \u2192 callout arrow 9 points here\n10. OEM 01010-E1030 \u2192 I can see a bolt securing the small L-shaped bracket (callout 9) \u2192 callout arrow 10 points here\n11. OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 10) \u2192 callout arrow 11 points here\n12. OEM 6240-11-7830 \u2192 I can see a small, rectangular plate with a single hole, attached to a larger bracket \u2192 callout arrow 12 points here\n13. OEM 01010-E1030 \u2192 I can see a bolt securing the small plate (callout 12) \u2192 callout arrow 13 points here\n14. OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 13) \u2192 callout arrow 14 points here\n15. OEM 6240-11-8980 \u2192 I can see a small, irregularly shaped plate with two holes, located at the bottom center of the assembly \u2192 callout arrow 15 points here\n16. OEM 01010-E1030 \u2192 I can see a bolt securing the small plate (callout 15) \u2192 callout arrow 16 points here\n17. OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 16) \u2192 callout arrow 17 points here", "extra": {"model_index": 2, "iteration": 1}}
{"ts": "2026-05-27T00:24:17.393085", "phase": "phase4a_extract", "oem": "", "desc": "", "model": "mistral:mistral-medium-2508", "prompt": "From this analysis of a Komatsu diagram:\n\nPART [KEY=6240-11-8970]:\n  - Physical appearance: This component is a square-shaped gasket/cover with rounded edges and four holes.\n  - Spatial location in diagram: Located at the top-left corner of the heat shield assembly.\n  - Matching callout number: 1\n  - Confidence: HIGH\n\nPART [KEY=6240-11-9110]:\n  - Physical appearance: This component is a flat, elongated plate with multiple holes.\n  - Spatial location in diagram: Positioned in the middle of the assembly, connecting various parts.\n  - Matching callout number: 2\n  - Confidence: HIGH\n\nPART [KEY=01010-E1020]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Located near the bottom-left corner, connected to the cylinder block.\n  - Matching callout number: 3\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c4]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the bottom-left corner, close to the cylinder block.\n  - Matching callout number: 4\n  - Confidence: HIGH\n\nPART [KEY=01010-E1035]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.\n  - Matching callout number: 5\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c6]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the bottom-left corner, associated with a bolt.\n  - Matching callout number: 6\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c7]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Located near the top-left corner, connected to the heat shield.\n  - Matching callout number: 7\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c8]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the top-left corner, associated with a bolt.\n  - Matching callout number: 8\n  - Confidence: HIGH\n\nPART [KEY=6240-11-7580]:\n  - Physical appearance: This component is an L-shaped bracket.\n  - Spatial location in diagram: Located near the top-right corner, connected to the heat shield.\n  - Matching callout number: 9\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c10]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the top-right corner, connected to the heat shield.\n  - Matching callout number: 10\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c11]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the top-right corner, associated with a bolt.\n  - Matching callout number: 11\n  - Confidence: HIGH\n\nPART [KEY=6240-11-7830]:\n  - Physical appearance: This component is a cover with a rectangular shape and a tab.\n  - Spatial location in diagram: Located near the bottom-left corner, connected to the heat shield.\n  - Matching callout number: 12\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c13]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the bottom-center, connected to the heat shield.\n  - Matching callout number: 13\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c14]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the bottom-center, associated with a bolt.\n  - Matching callout number: 14\n  - Confidence: HIGH\n\nPART [KEY=6240-11-8980]:\n  - Physical appearance: This component is a cover with a rectangular shape and a tab.\n  - Spatial location in diagram: Located near the bottom-right corner, connected to the air cleaner mounting.\n  - Matching callout number: 15\n  - Confidence: HIGH\n\nPART [KEY=01010-E1030_c16]:\n  - Physical appearance: This component is a bolt with a hexagonal head.\n  - Spatial location in diagram: Positioned near the bottom-right corner, connected to the heat shield.\n  - Matching callout number: 16\n  - Confidence: HIGH\n\nPART [KEY=01643-31032_c17]:\n  - Physical appearance: This component is a flat washer with a circular shape.\n  - Spatial location in diagram: Positioned near the bottom-right corner, associated with a bolt.\n  - Matching callout number: 17\n  - Confidence: HIGH\n\nExtract ONLY the final part-to-position assignments.\nValid positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nUse the KEY column from the manifest (not raw OEM number) as JSON keys.\nEach KEY must map to exactly one integer position from the valid list.\nFor duplicate OEMs (KEY ends in _cN), each instance gets its OWN position.\nReturn ONLY valid JSON, nothing else:\n{\"KEY_or_OEM\": callout_integer, ...}", "response": "```json\n{\n  \"6240-11-8970\": 1,\n  \"6240-11-9110\": 2,\n  \"01010-E1020\": 3,\n  \"01010-E1030_c4\": 4,\n  \"01010-E1035\": 5,\n  \"01643-31032_c6\": 6,\n  \"01010-E1030_c7\": 7,\n  \"01643-31032_c8\": 8,\n  \"6240-11-7580\": 9,\n  \"01010-E1030_c10\": 10,\n  \"01643-31032_c11\": 11,\n  \"6240-11-7830\": 12,\n  \"01010-E1030_c13\": 13,\n  \"01643-31032_c14\": 14,\n  \"6240-11-8980\": 15,\n  \"01010-E1030_c16\": 16,\n  \"01643-31032_c17\": 17\n}\n```", "extra": {"parsed": {"6240-11-8970": 1, "6240-11-9110": 2, "01010-E1020": 3, "01010-E1030_c4": 4, "01010-E1035": 5, "01643-31032_c6": 6, "01010-E1030_c7": 7, "01643-31032_c8": 8, "6240-11-7580": 9, "01010-E1030_c10": 10, "01643-31032_c11": 11, "6240-11-7830": 12, "01010-E1030_c13": 13, "01643-31032_c14": 14, "6240-11-8980": 15, "01010-E1030_c16": 16, "01643-31032_c17": 17}, "iteration": 1}}
{"ts": "2026-05-27T00:24:17.403636", "phase": "phase4a_extract", "oem": "", "desc": "", "model": "gemini-2.5-flash", "prompt": "From this analysis of a Komatsu diagram:\n\nHere is the callout assignment for each part:\n\n1.  OEM 6240-11-8970 \u2192 I can see a large, L-shaped bracket with multiple holes \u2192 callout arrow 1 points here\n2.  OEM 6240-11-9110 \u2192 I can see a long, flat rectangular plate with several holes, labeled \"To Cylinder Block\" \u2192 callout arrow 2 points here\n3.  OEM 01010-E1020 \u2192 I can see a bolt securing the plate (callout 2) to another component \u2192 callout arrow 3 points here\n4.  OEM 01010-E1030 \u2192 I can see a bolt securing the plate (callout 2) to another component \u2192 callout arrow 4 points here\n5.  OEM 01010-E1035 \u2192 I can see a bolt securing the large L-shaped bracket (callout 1) to another component \u2192 callout arrow 5 points here\n6.  OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 4) \u2192 callout arrow 6 points here\n7.  OEM 01010-E1030 \u2192 I can see a bolt securing the large L-shaped bracket (callout 1) \u2192 callout arrow 7 points here\n8.  OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 7) \u2192 callout arrow 8 points here\n9.  OEM 6240-11-7580 \u2192 I can see a small, L-shaped bracket with two holes, attached to the top right of the main assembly \u2192 callout arrow 9 points here\n10. OEM 01010-E1030 \u2192 I can see a bolt securing the small L-shaped bracket (callout 9) \u2192 callout arrow 10 points here\n11. OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 10) \u2192 callout arrow 11 points here\n12. OEM 6240-11-7830 \u2192 I can see a small, rectangular plate with a single hole, attached to a larger bracket \u2192 callout arrow 12 points here\n13. OEM 01010-E1030 \u2192 I can see a bolt securing the small plate (callout 12) \u2192 callout arrow 13 points here\n14. OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 13) \u2192 callout arrow 14 points here\n15. OEM 6240-11-8980 \u2192 I can see a small, irregularly shaped plate with two holes, located at the bottom center of the assembly \u2192 callout arrow 15 points here\n16. OEM 01010-E1030 \u2192 I can see a bolt securing the small plate (callout 15) \u2192 callout arrow 16 points here\n17. OEM 01643-31032 \u2192 I can see a washer under the head of the bolt (callout 16) \u2192 callout arrow 17 points here\n\nExtract ONLY the final part-to-position assignments.\nValid positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nUse the KEY column from the manifest (not raw OEM number) as JSON keys.\nEach KEY must map to exactly one integer position from the valid list.\nFor duplicate OEMs (KEY ends in _cN), each instance gets its OWN position.\nReturn ONLY valid JSON, nothing else:\n{\"KEY_or_OEM\": callout_integer, ...}", "response": "```json\n{\n  \"6240-11-8970\": 1,\n  \"6240-11-9110\": 2,\n  \"01010-E1020\": 3,\n  \"01010-E1030\": 4,\n  \"01010-E1035\": 5,\n  \"01643-31032\": 6,\n  \"01010-E1030_c1\": 7,\n  \"01643-31032_c1\": 8,\n  \"6240-11-7580\": 9,\n  \"01010-E1030_c2\": 10,\n  \"01643-31032_c2\": 11,\n  \"6240-11-7830\": 12,\n  \"01010-E1030_c3\": 13,\n  \"01643-31032_c3\": 14,\n  \"6240-11-8980\": 15,\n  \"01010-E1030_c4\": 16,\n  \"01643-31032_c4\": 17\n}\n```", "extra": {"parsed": {"6240-11-8970": 1, "6240-11-9110": 2, "01010-E1020": 3, "01010-E1030": 4, "01010-E1035": 5, "01643-31032": 6, "01010-E1030_c1": 7, "01643-31032_c1": 8, "6240-11-7580": 9, "01010-E1030_c2": 10, "01643-31032_c2": 11, "6240-11-7830": 12, "01010-E1030_c3": 13, "01643-31032_c3": 14, "6240-11-8980": 15, "01010-E1030_c4": 16, "01643-31032_c4": 17}, "iteration": 1}}
{"ts": "2026-05-27T00:24:17.404653", "phase": "phase4a_extract", "oem": "", "desc": "", "model": "gemini-3.5-flash", "prompt": "From this analysis of a Komatsu diagram:\n\nBased on the engineering diagram and the provided parts list, here is the step-by-step identification for each part:\n\n1. **OEM 6240-11-8970** \u2192 I can see the large heat shield cover on the left side of the diagram \u2192 callout arrow **1** points here\n2. **OEM 6240-11-9110** \u2192 I can see the small plate near the top-middle of the diagram \u2192 callout arrow **2** points here\n3. **OEM 01010-E1020** \u2192 I can see the bolt securing the plate near the top-middle \u2192 callout arrow **3** points here\n4. **OEM 01010-E1030** \u2192 I can see the bolt securing the cover at the top-left \u2192 callout arrow **4** points here\n5. **OEM 01010-E1035** \u2192 I can see the bolt securing the cover at the bottom-left \u2192 callout arrow **5** points here\n6. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the bottom-left \u2192 callout arrow **6** points here\n7. **OEM 01010-E1030** \u2192 I can see the bolt securing the bracket at the top-right \u2192 callout arrow **7** points here\n8. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the top-right \u2192 callout arrow **8** points here\n9. **OEM 6240-11-7580** \u2192 I can see the bracket on the right side of the diagram \u2192 callout arrow **9** points here\n10. **OEM 01010-E1030** \u2192 I can see the bolt securing the bracket at the bottom-right \u2192 callout arrow **10** points here\n11. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the bottom-right \u2192 callout arrow **11** points here\n12. **OEM 6240-11-7830** \u2192 I can see the cover on the right side of the diagram \u2192 callout arrow **12** points here\n13. **OEM 01010-E1030** \u2192 I can see the bolt securing the cover at the top-right \u2192 callout arrow **13** points here\n14. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the top-right \u2192 callout arrow **14** points here\n15. **OEM 6240-11-8980** \u2192 I can see the cover on the bottom-right of the diagram \u2192 callout arrow **15** points here\n16. **OEM 01010-E1030** \u2192 I can see the bolt securing the cover at the bottom-right \u2192 callout arrow **16** points here\n17. **OEM 01643-31032** \u2192 I can see the washer under the bolt at the bottom-right \u2192 callout arrow **17** points here\n\nExtract ONLY the final part-to-position assignments.\nValid positions are: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nUse the KEY column from the manifest (not raw OEM number) as JSON keys.\nEach KEY must map to exactly one integer position from the valid list.\nFor duplicate OEMs (KEY ends in _cN), each instance gets its OWN position.\nReturn ONLY valid JSON, nothing else:\n{\"KEY_or_OEM\": callout_integer, ...}", "response": "```json\n{\n  \"6240-11-8970\": 1,\n  \"6240-11-9110\": 2,\n  \"01010-E1020\": 3,\n  \"01010-E1030_c1\": 4,\n  \"01010-E1035\": 5,\n  \"01643-31032_c1\": 6,\n  \"01010-E1030_c2\": 7,\n  \"01643-31032_c2\": 8,\n  \"6240-11-7580\": 9,\n  \"01010-E1030_c3\": 10,\n  \"01643-31032_c3\": 11,\n  \"6240-11-7830\": 12,\n  \"01010-E1030_c4\": 13,\n  \"01643-31032_c4\": 14,\n  \"6240-11-8980\": 15,\n  \"01010-E1030_c5\": 16,\n  \"01643-31032_c5\": 17\n}\n```", "extra": {"parsed": {"6240-11-8970": 1, "6240-11-9110": 2, "01010-E1020": 3, "01010-E1030_c1": 4, "01010-E1035": 5, "01643-31032_c1": 6, "01010-E1030_c2": 7, "01643-31032_c2": 8, "6240-11-7580": 9, "01010-E1030_c3": 10, "01643-31032_c3": 11, "6240-11-7830": 12, "01010-E1030_c4": 13, "01643-31032_c4": 14, "6240-11-8980": 15, "01010-E1030_c5": 16, "01643-31032_c5": 17}, "iteration": 1}}
{"ts": "2026-05-27T00:24:54.511163", "phase": "phase8_correction", "oem": "6240-11-8970", "desc": "COVER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-8970 (COVER) \u2192 Position 1\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-8970 is a rocker arm or cylinder head cover designed for the valve train assembly of Komatsu\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 1\n  IMAGE 3: Photo of the actual part 6240-11-8970\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 1 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 1 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 1\nREASON: The OEM part 6240-11-8970 is the cover plate that correctly corresponds to Position 1 in the heat shield diagram.", "extra": {"current_pos": 1, "iteration": 1}}
{"ts": "2026-05-27T00:24:54.511021", "phase": "phase8_correction", "oem": "6240-11-8970", "desc": "COVER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-8970 (COVER) \u2192 Position 1\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-8970 is a rocker arm or cylinder head cover designed for the valve train assembly of Komatsu\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 1\n  IMAGE 3: Photo of the actual part 6240-11-8970\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 1 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 1 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: Not in diagram\nREASON: The part in IMAGE 3 is a flat, rectangular gasket/flange, which does not match the large, L-shaped bracket indicated by Position 1 in the diagram, nor any other component shown.", "extra": {"current_pos": 1, "iteration": 1}}
{"ts": "2026-05-27T00:24:54.515219", "phase": "phase8_correction", "oem": "6240-11-8970", "desc": "COVER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-8970 (COVER) \u2192 Position 1\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-8970 is a rocker arm or cylinder head cover designed for the valve train assembly of Komatsu\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 1\n  IMAGE 3: Photo of the actual part 6240-11-8970\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 1 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 1 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: 15\nREASON: The part in IMAGE 3 is a gasket for a circular opening, which corresponds to the shape and position indicated by callout 15 in IMAGE 1.", "extra": {"current_pos": 1, "iteration": 1}}
{"ts": "2026-05-27T00:24:55.960686", "phase": "phase8_correction", "oem": "6240-11-9110", "desc": "PLATE", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-9110 (PLATE) \u2192 Position 2\nPhysical shape: A flat, rectangular steel plate with rounded corners and several circular mounting holes, painted matte black and measuring approximately 25cm long.\nTechnical note: Komatsu part number 6240-11-9110 is a specialized plate belonging to the cylinder head and rocker housing assembly of Ko\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 2\n  IMAGE 3: Photo of the actual part 6240-11-9110\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 2 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 2 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 12\nREASON: The part in Image 3 is a flat rectangular plate with mounting holes, which matches the component pointed to by callout 12 in the diagram.", "extra": {"current_pos": 2, "iteration": 1}}
{"ts": "2026-05-27T00:24:55.969853", "phase": "phase8_correction", "oem": "6240-11-9110", "desc": "PLATE", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-9110 (PLATE) \u2192 Position 2\nPhysical shape: A flat, rectangular steel plate with rounded corners and several circular mounting holes, painted matte black and measuring approximately 25cm long.\nTechnical note: Komatsu part number 6240-11-9110 is a specialized plate belonging to the cylinder head and rocker housing assembly of Ko\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 2\n  IMAGE 3: Photo of the actual part 6240-11-9110\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 2 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 2 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: 12\nREASON: The part shown in IMAGE 3 is a U-channel bracket with raised sections, which does not match the small L-shaped bracket depicted at position 12 in the diagram, nor any other component in the diagram.", "extra": {"current_pos": 2, "iteration": 1}}
{"ts": "2026-05-27T00:24:55.973281", "phase": "phase8_correction", "oem": "6240-11-9110", "desc": "PLATE", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-9110 (PLATE) \u2192 Position 2\nPhysical shape: A flat, rectangular steel plate with rounded corners and several circular mounting holes, painted matte black and measuring approximately 25cm long.\nTechnical note: Komatsu part number 6240-11-9110 is a specialized plate belonging to the cylinder head and rocker housing assembly of Ko\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 2\n  IMAGE 3: Photo of the actual part 6240-11-9110\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 2 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 2 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 2\nREASON: The flat, rectangular plate with mounting holes in IMAGE 3 corresponds to the part indicated by callout 2 in IMAGE 2.", "extra": {"current_pos": 2, "iteration": 1}}
{"ts": "2026-05-27T00:24:57.275670", "phase": "phase8_correction", "oem": "01010-E1020", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1020 (BOLT) \u2192 Position 3\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1020 is a high-strength metric hex head bolt used to provide secure mechanical fastening for \n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 3\n  IMAGE 3: Photo of the actual part 01010-E1020\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 3 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 3 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 3\nREASON: The visual characteristics of the hex head bolt in IMAGE 3 match the component indicated by callout 3 in IMAGE 2.", "extra": {"current_pos": 3, "iteration": 1}}
{"ts": "2026-05-27T00:24:57.275898", "phase": "phase8_correction", "oem": "01010-E1020", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1020 (BOLT) \u2192 Position 3\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1020 is a high-strength metric hex head bolt used to provide secure mechanical fastening for \n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 3\n  IMAGE 3: Photo of the actual part 01010-E1020\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 3 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 3 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 3\nREASON: Position 3 in the diagram depicts a partially threaded hex head bolt, which matches the textual description of Komatsu part number 01010-E1020, despite the visual discrepancy with IMAGE 3 which shows a fully threaded bolt.", "extra": {"current_pos": 3, "iteration": 1}}
{"ts": "2026-05-27T00:24:57.277921", "phase": "phase8_correction", "oem": "01010-E1020", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1020 (BOLT) \u2192 Position 3\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1020 is a high-strength metric hex head bolt used to provide secure mechanical fastening for \n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 3\n  IMAGE 3: Photo of the actual part 01010-E1020\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 3 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 3 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 3\nREASON: The callout 3 points directly to the hex bolt used to secure the heat shield assembly, which matches the physical part shown in the photo.", "extra": {"current_pos": 3, "iteration": 1}}
{"ts": "2026-05-27T00:24:58.612249", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 4\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 4\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 4 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 4 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.", "extra": {"current_pos": 4, "iteration": 1}}
{"ts": "2026-05-27T00:24:58.622502", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 4\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 4\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 4 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 4 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.", "extra": {"current_pos": 4, "iteration": 1}}
{"ts": "2026-05-27T00:24:58.626015", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 4\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 4\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 4 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 4 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.", "extra": {"current_pos": 4, "iteration": 1}}
{"ts": "2026-05-27T00:24:59.927351", "phase": "phase8_correction", "oem": "01010-E1035", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1035 (BOLT) \u2192 Position 5\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1035 is a high-strength metric hex-head bolt used to provide secure mechanical fastening betw\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 5\n  IMAGE 3: Photo of the actual part 01010-E1035\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 5 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 5 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 5\nREASON: Callout 5 correctly points to the hex-head bolt used to secure the heat shield assembly in the diagram.", "extra": {"current_pos": 5, "iteration": 1}}
{"ts": "2026-05-27T00:24:59.930264", "phase": "phase8_correction", "oem": "01010-E1035", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1035 (BOLT) \u2192 Position 5\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1035 is a high-strength metric hex-head bolt used to provide secure mechanical fastening betw\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 5\n  IMAGE 3: Photo of the actual part 01010-E1035\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 5 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 5 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 5\nREASON: Callout 5 in the diagram clearly points to a hexagonal head bolt, which matches the physical shape of the part shown in IMAGE 3 and the provided description.", "extra": {"current_pos": 5, "iteration": 1}}
{"ts": "2026-05-27T00:24:59.933880", "phase": "phase8_correction", "oem": "01010-E1035", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1035 (BOLT) \u2192 Position 5\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1035 is a high-strength metric hex-head bolt used to provide secure mechanical fastening betw\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 5\n  IMAGE 3: Photo of the actual part 01010-E1035\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 5 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 5 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\n\nCORRECT_POSITION: 5\n\nREASON: The visual and physical characteristics of the bolt in IMAGE 3 match the component indicated by callout 5 in IMAGE 2.", "extra": {"current_pos": 5, "iteration": 1}}
{"ts": "2026-05-27T00:25:01.274427", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 6\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 6\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 6 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 6 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 6\nREASON: Position 6 in the diagram clearly points to a flat washer, which matches the physical shape and description of the Komatsu part 01643-31032.", "extra": {"current_pos": 6, "iteration": 1}}
{"ts": "2026-05-27T00:25:01.275283", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 6\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 6\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 6 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 6 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 6\nREASON: The callout 6 correctly points to the flat washer positioned under the bolt in the diagram.", "extra": {"current_pos": 6, "iteration": 1}}
{"ts": "2026-05-27T00:25:01.279801", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 6\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 6\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 6 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 6 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 6\nREASON: The zoomed-in view of position 6 in IMAGE 2 shows a washer that matches the shape and placement of the part shown in IMAGE 3.", "extra": {"current_pos": 6, "iteration": 1}}
{"ts": "2026-05-27T00:25:01.373915", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 7\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 7\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 7 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 7 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.", "extra": {"current_pos": 7, "iteration": 1}}
{"ts": "2026-05-27T00:25:01.373712", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 7\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 7\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 7 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 7 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.", "extra": {"current_pos": 7, "iteration": 1}}
{"ts": "2026-05-27T00:25:01.374457", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 7\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 7\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 7 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 7 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.", "extra": {"current_pos": 7, "iteration": 1}}
{"ts": "2026-05-27T00:25:02.688090", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 8\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 8\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 8 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 8 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 8\nREASON: Position 8 correctly points to the flat washer located beneath the bolt head in the diagram.", "extra": {"current_pos": 8, "iteration": 1}}
{"ts": "2026-05-27T00:25:02.703832", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 8\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 8\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 8 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 8 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 8\nREASON: Position 8 in the diagram clearly points to a flat washer, which matches the physical shape of the Komatsu part 01643-31032 shown in IMAGE 3.", "extra": {"current_pos": 8, "iteration": 1}}
{"ts": "2026-05-27T00:25:02.710433", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 8\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 8\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 8 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 8 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\n\nCORRECT_POSITION: 8\n\nREASON: The zoomed-in view of position 8 in IMAGE 2 shows a flat washer that matches the shape and description of the part in IMAGE 3.", "extra": {"current_pos": 8, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.227547", "phase": "phase8_correction", "oem": "6240-11-7580", "desc": "BRACKET", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-7580 (BRACKET) \u2192 Position 9\nPhysical shape: An L-shaped black steel mounting bracket with multiple pre-drilled bolt holes, approximately 25cm in length.\nTechnical note: Komatsu part number 6240-11-7580 is a steel mounting bracket designed to secure and support components within the engine\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 9\n  IMAGE 3: Photo of the actual part 6240-11-7580\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 9 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 9 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 15\nREASON: The physical part in IMAGE 3 perfectly matches the shape and hole pattern of the component indicated by callout 15 in the diagram.", "extra": {"current_pos": 9, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.228370", "phase": "phase8_correction", "oem": "6240-11-7580", "desc": "BRACKET", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-7580 (BRACKET) \u2192 Position 9\nPhysical shape: An L-shaped black steel mounting bracket with multiple pre-drilled bolt holes, approximately 25cm in length.\nTechnical note: Komatsu part number 6240-11-7580 is a steel mounting bracket designed to secure and support components within the engine\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 9\n  IMAGE 3: Photo of the actual part 6240-11-7580\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 9 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 9 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 15\nREASON: The L-shaped mounting bracket shown in IMAGE 3 matches the component pointed to by callout 15 in the diagram.", "extra": {"current_pos": 9, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.229053", "phase": "phase8_correction", "oem": "6240-11-7580", "desc": "BRACKET", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-7580 (BRACKET) \u2192 Position 9\nPhysical shape: An L-shaped black steel mounting bracket with multiple pre-drilled bolt holes, approximately 25cm in length.\nTechnical note: Komatsu part number 6240-11-7580 is a steel mounting bracket designed to secure and support components within the engine\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 9\n  IMAGE 3: Photo of the actual part 6240-11-7580\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 9 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 9 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 9\nREASON: The L-shaped black steel mounting bracket in IMAGE 3 matches the shape and mounting configuration of the part indicated at position 9 in IMAGE 2.", "extra": {"current_pos": 9, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.320656", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 10\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 10\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 10 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 10 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.", "extra": {"current_pos": 10, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.320799", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 10\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 10\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 10 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 10 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.", "extra": {"current_pos": 10, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.321912", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 10\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 10\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 10 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 10 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.", "extra": {"current_pos": 10, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.389772", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 11\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 11\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 11 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 11 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 8\nREASON: Position 8 correctly points to the flat washer located beneath the bolt head in the diagram.", "extra": {"current_pos": 11, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.389927", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 11\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 11\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 11 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 11 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 8\nREASON: Position 8 in the diagram clearly points to a flat washer, which matches the physical shape of the Komatsu part 01643-31032 shown in IMAGE 3.", "extra": {"current_pos": 11, "iteration": 1}}
{"ts": "2026-05-27T00:25:04.390532", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 11\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 11\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 11 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 11 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\n\nCORRECT_POSITION: 8\n\nREASON: The zoomed-in view of position 8 in IMAGE 2 shows a flat washer that matches the shape and description of the part in IMAGE 3.", "extra": {"current_pos": 11, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.666427", "phase": "phase8_correction", "oem": "6240-11-7830", "desc": "COVER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-7830 (COVER) \u2192 Position 12\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-7830 is a cylinder head cover (rocker cover) utilized within the cylinder head and valve tra\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 12\n  IMAGE 3: Photo of the actual part 6240-11-7830\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 12 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 12 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: 15\nREASON: The physical part in IMAGE 3 is a rectangular plate with a bracket, which matches component 15 in the diagram, not the long bar indicated by position 2.", "extra": {"current_pos": 12, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.666300", "phase": "phase8_correction", "oem": "6240-11-7830", "desc": "COVER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-7830 (COVER) \u2192 Position 12\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-7830 is a cylinder head cover (rocker cover) utilized within the cylinder head and valve tra\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 12\n  IMAGE 3: Photo of the actual part 6240-11-7830\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 12 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 12 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 2\nREASON: The part in IMAGE 3 is a circular cover plate with four mounting holes, which matches the component pointed to by callout 2 in the diagram.", "extra": {"current_pos": 12, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.672579", "phase": "phase8_correction", "oem": "6240-11-7830", "desc": "COVER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-7830 (COVER) \u2192 Position 12\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-7830 is a cylinder head cover (rocker cover) utilized within the cylinder head and valve tra\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 12\n  IMAGE 3: Photo of the actual part 6240-11-7830\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 12 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 12 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: 2\nREASON: The actual part in IMAGE 3 is a flat plate with a distinctive tab and holes, which corresponds to the component indicated by position 2 in IMAGE 1.", "extra": {"current_pos": 12, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.766138", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 13\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 13\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 13 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 13 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.", "extra": {"current_pos": 13, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.767395", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 13\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 13\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 13 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 13 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.", "extra": {"current_pos": 13, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.768082", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 13\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 13\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 13 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 13 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.", "extra": {"current_pos": 13, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.838110", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 14\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 14\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 14 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 14 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 8\nREASON: Position 8 correctly points to the flat washer located beneath the bolt head in the diagram.", "extra": {"current_pos": 14, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.838262", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 14\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 14\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 14 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 14 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 8\nREASON: Position 8 in the diagram clearly points to a flat washer, which matches the physical shape of the Komatsu part 01643-31032 shown in IMAGE 3.", "extra": {"current_pos": 14, "iteration": 1}}
{"ts": "2026-05-27T00:25:06.841050", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 14\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 14\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 14 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 14 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\n\nCORRECT_POSITION: 8\n\nREASON: The zoomed-in view of position 8 in IMAGE 2 shows a flat washer that matches the shape and description of the part in IMAGE 3.", "extra": {"current_pos": 14, "iteration": 1}}
{"ts": "2026-05-27T00:25:08.216537", "phase": "phase8_correction", "oem": "6240-11-8980", "desc": "COVER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-8980 (COVER) \u2192 Position 15\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-8980 is a protective cover assembly utilized within the cylinder head and valve mechanism sy\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 15\n  IMAGE 3: Photo of the actual part 6240-11-8980\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 15 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 15 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: 9\nREASON: Position 9 points to a bolt, while the OEM part 6240-11-8980, as shown in IMAGE 3, is a rectangular gasket which is not depicted in this diagram.", "extra": {"current_pos": 15, "iteration": 1}}
{"ts": "2026-05-27T00:25:08.225494", "phase": "phase8_correction", "oem": "6240-11-8980", "desc": "COVER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-8980 (COVER) \u2192 Position 15\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-8980 is a protective cover assembly utilized within the cylinder head and valve mechanism sy\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 15\n  IMAGE 3: Photo of the actual part 6240-11-8980\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 15 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 15 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: NO\nCORRECT_POSITION: 17\nREASON: The actual part in IMAGE 3 is a gasket that matches the shape and mounting holes of the component indicated by position 17 in IMAGE 2.", "extra": {"current_pos": 15, "iteration": 1}}
{"ts": "2026-05-27T00:25:08.226801", "phase": "phase8_correction", "oem": "6240-11-8980", "desc": "COVER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 6240-11-8980 (COVER) \u2192 Position 15\nPhysical shape: A flat, circular steel cover plate with multiple mounting holes around its perimeter, painted black and measuring approximately 15cm in diameter.\nTechnical note: Komatsu part number 6240-11-8980 is a protective cover assembly utilized within the cylinder head and valve mechanism sy\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 15\n  IMAGE 3: Photo of the actual part 6240-11-8980\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 15 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 15 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 9\nREASON: The circular cover plate shown in the photo matches the component pointed to by callout 9 in the diagram.", "extra": {"current_pos": 15, "iteration": 1}}
{"ts": "2026-05-27T00:25:08.318374", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 16\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 16\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 16 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 16 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The callout 4 points directly to the hexagon head bolt, which matches the physical part shown in the photo.", "extra": {"current_pos": 16, "iteration": 1}}
{"ts": "2026-05-27T00:25:08.321353", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 16\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 16\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 16 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 16 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The visual and technical characteristics of the hexagon head bolt in IMAGE 3 correspond to the part indicated by callout 4 in IMAGE 2.", "extra": {"current_pos": 16, "iteration": 1}}
{"ts": "2026-05-27T00:25:08.320679", "phase": "phase8_correction", "oem": "01010-E1030", "desc": "BOLT", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01010-E1030 (BOLT) \u2192 Position 16\nPhysical shape: A heavy-duty steel bolt featuring a hexagonal head and a partially threaded cylindrical shank, dark grey in color and approximately 10 cm long.\nTechnical note: Komatsu part number 01010-E1030 is a high-strength metric hexagon head bolt designed to securely fasten and provide clam\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 16\n  IMAGE 3: Photo of the actual part 01010-E1030\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 16 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 16 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 4\nREASON: The component at position 4 in the diagram is clearly a hexagonal head bolt, which matches the physical shape of the OEM part 01010-E1030 shown in IMAGE 3.", "extra": {"current_pos": 16, "iteration": 1}}
{"ts": "2026-05-27T00:25:09.628138", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-3.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 17\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 17\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 17 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 17 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "Based on the analysis of the images:\n\n1. **IMAGE 3** shows a flat, circular steel washer (01643-31032).\n2. **IMAGE 1** and **IMAGE 2** show callout 17 pointing directly to the washer located underneath the bolt (callout 16) on the heat shield assembly.\n3. Therefore, the mapping of the washer to position 17 is correct.\n\nMATCH: YES\nCORRECT_POSITION: 17\nREASON: Callout 17 correctly points to the flat washer located underneath the bolt (callout 16) in the diagram.", "extra": {"current_pos": 17, "iteration": 1}}
{"ts": "2026-05-27T00:25:09.632703", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "mistral:mistral-medium-2508", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 17\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 17\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 17 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 17 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 17\nREASON: The zoomed-in diagram at Position 17 shows a washer that matches the physical shape and description of the part in IMAGE 3.", "extra": {"current_pos": 17, "iteration": 1}}
{"ts": "2026-05-27T00:25:09.641071", "phase": "phase8_correction", "oem": "01643-31032", "desc": "WASHER", "model": "gemini-2.5-flash", "prompt": "Komatsu diagram 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'. Valid callout positions: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\n\nCurrent mapping: OEM 01643-31032 (WASHER) \u2192 Position 17\nPhysical shape: A flat, circular steel washer with a central hole, metallic grey in color, approximately 5cm in diameter.\nTechnical note: Komatsu part number 01643-31032 is a heavy-duty, hardened flat washer designed to distribute fastener clamping force, pr\n\nYou are shown 3 images:\n  IMAGE 1: Full diagram with all position numbers visible\n  IMAGE 2: Zoomed crop of the diagram at Position 17\n  IMAGE 3: Photo of the actual part 01643-31032\n\nSteps:\n1. In IMAGE 3, identify what the part looks like\n2. In IMAGE 1, find where this type of component appears\n3. In IMAGE 2, check if callout 17 points to this component\n\nAnswer format (last 3 lines must be exact):\nMATCH: YES or NO\nCORRECT_POSITION: 17 (if match) or the correct number from [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17]\nREASON: one sentence", "response": "MATCH: YES\nCORRECT_POSITION: 17\nREASON: Position 17 in the diagram clearly points to a flat washer, which matches the physical shape of the OEM part 01643-31032 shown in IMAGE 3.", "extra": {"current_pos": 17, "iteration": 1}}
{"ts": "2026-05-27T00:25:17.347357", "phase": "raw_api_call_mistral", "oem": "", "desc": "", "model": "mistral-medium-2508", "prompt": "This is a Komatsu diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.\nHere is the current part-to-position mapping:\n  Position 1: 6240-11-8970 (COVER) [COVER]\n  Position 10: 01010-E1030_c10 (BOLT)\n  Position 11: 01643-31032_c11 (WASHER)\n  Position 12: 6240-11-7830 (COVER) [COVER]\n  Position 13: 01010-E1030_c13 (BOLT)\n  Position 14: 01643-31032_c14 (WASHER)\n  Position 15: 6240-11-8980 (COVER) [COVER]\n  Position 16: 01010-E1030_c16 (BOLT)\n  Position 17: 01643-31032_c17 (WASHER)\n  Position 2: 6240-11-9110 (PLATE) [PLATE]\n  Position 3: 01010-E1020 (BOLT) [BOLT]\n  Position 4: 01010-E1030_c4 (BOLT)\n  Position 5: 01010-E1035 (BOLT) [BOLT]\n  Position 6: 01643-31032_c6 (WASHER)\n  Position 7: 01010-E1030_c7 (BOLT)\n  Position 8: 01643-31032_c8 (WASHER)\n  Position 9: 6240-11-7580 (BRACKET) [BRACKET]\n\nReview the ENTIRE mapping. Are there any obvious errors where two parts should be swapped? If YES, state which positions to swap.\nIf the mapping looks correct, answer: ALL CORRECT\nFormat: SWAP pos_A pos_B (one per line) or ALL CORRECT | [IMAGE]", "response": "ALL CORRECT", "extra": {"cache_key": "consistency_964217_35613_dbv3_holistic_4d0a17__imgaabd2b2a"}}
{"ts": "2026-05-27T00:25:18.591831", "phase": "phase10_consistency", "oem": "", "desc": "HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)", "model": "mistral:mistral-medium-2508", "prompt": "This is a Komatsu diagram titled 'HEAT SHIELD (WATER COOLING TURBOCHARGER SPEC.)(#310216-)'.\nHere is the current part-to-position mapping:\n  Position 1: 6240-11-8970 (COVER) [COVER]\n  Position 10: 01010-E1030_c10 (BOLT)\n  Position 11: 01643-31032_c11 (WASHER)\n  Position 12: 6240-11-7830 (COVER) [COVER]\n  Position 13: 01010-E1030_c13 (BOLT)\n  Position 14: 01643-31032_c14 (WASHER)\n  Position 15: 6240-11-8980 (COVER) [COVER]\n  Position 16: 01010-E1030_c16 (BOLT)\n  Position 17: 01643-31032_c17 (WASHER)\n  Position 2: 6240-11-9110 (PLATE) [PLATE]\n  Position 3: 01010-E1020 (BOLT) [BOLT]\n  Position 4: 01010-E1030_c4 (BOLT)\n  Position 5: 01010-E1035 (BOLT) [BOLT]\n  Position 6: 01643-31032_c6 (WASHER)\n  Position 7: 01010-E1030_c7 (BOLT)\n  Position 8: 01643-31032_c8 (WASHER)\n  Position 9: 6240-11-7580 (BRACKET) [BRACKET]\n\nReview the ENTIRE mapping. Are there any obvious errors where two parts should be swapped? If YES, state which positions to swap.\nIf the mapping looks correct, answer: ALL CORRECT\nFormat: SWAP pos_A pos_B (one per line) or ALL CORRECT", "response": "ALL CORRECT", "extra": {}}