Response stringlengths 15 2k | Instruction stringlengths 37 2k | Prompt stringlengths 14 160 |
|---|---|---|
Hey this is kinda late but maybe it will help someone. For me, I included theauthSource=adminas a query param in the MongoDB connection url and it worked, here's an example:mongodb://${MONGODB_USERNAME}:${MONGODB_PASSWORD}@localhost:${MONGODB_PORT}/${MONGODB_DB}?authMechanism=DEFAULT&authSource=admin;I didn't have to i... | In my CI I need to make sure that my code works with mongo and so I'm using the official mongo docker image and passing my desired credentials as environment variables for the mongo image.build-on-mongo:
runs-on: ${{ matrix.os }}
env:
MONGO_INITDB_ROOT_USERNAME: root
MONGO_INITDB_ROOT_PASSWORD: pass... | Mongo connection url fails in Github Actions CI even though credentials are correct |
You could try to declare agent for each stage separately, for checkout stage you could use some default agent and docker agent for others.pipeline {
agent none
stage ('Checkout') {
agent any
steps {
git(
url: 'https://www.github.com/...',
credentialsId... | With Jenkins using theDeclarative Pipeline Syntaxhow do i get the Dockerfile (Dockerfile.ciin this example) from the SCM (Git) since theagentblock is executed before all the stages?pipeline {
agent {
dockerfile {
filename 'Dockerfile.ci'
}
}
stage ('Checkout') {
steps {
... | Jenkins declarative pipeline with Docker/Dockerfile agent from SCM |
Yes, the warp schedulers in Kepler can schedule two instructions per clock, as long as:
the instructions are independent
the instructions come from the same warp
there are sufficient execution resources in the SM for both instructions
If that fits your definition of superscalar, then it is superscalar.
With respect ... |
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by prog... | Are GPU Kepler CC3.0 processors not only pipelined architecture, but also superscalar? [closed] |
Ok after much mucking around and playing around it was the file request which wasnt including the subdomain folder, which was causing it to not find the file location. So I managed to do a manual check for the file, and this is what i got. This seems to do exactly what i want. Im not sure if there is a more efficient w... | Ok So i have come across a problem with my htaccess and how to get it to work.I have just purchased a ssl wildcard for my primary and sub domains.
I am with bluehost and they suggest adding this:RewriteEngine On
RewriteCond %{HTTP_HOST} ^subdomain.example.com$
RewriteCond %{REQUEST_URI} !^/subfolder/
RewriteCond %{REQ... | htaccess subdomain ssl wildcard not opening file |
If it actually is a submodule, meaning your GitHub repo also have a.gitmodulesfiles recording the associated path of that submodule, seemy answer here:1. git submodule deinit -f -- a/submodule
2. rm -rf .git/modules/a/submodule
3. git rm -f a/submoduleThen commit and push.But if it is a simplegitlink, displayed as ... | I accidentally created a submodule on GitHub after forcing a commit. For some reason, I can't wipe my repository and start over so I need some way to delete the submodule so I can recommit. Is there any way I can delete the submodule through my terminal? | How do I delete a submodule on GitHub? |
Yes, it is possible:git clone[email protected]:5834862.gitJust replace with your own Gist ID of course. | Github really seems to want us to use the HTTPS protocol to use Gists, for example, they only list the HTTPS url on a Gist page - e.g.https://gist.github.com/donatello/5834862Is it possible to clone a Gist using SSH protocol? | How to clone a Github Gist via SSH protocol? |
Update: They have fixed it and it is merged now!
https://github.com/wurstmeister/kafka-docker/pull/321
There's a bug open now with wurstmeister/kafka but they have gotten back to me with a workaround as follows
I believe his is part of a larger namespace collision problem that
affects multiple elements such as Kube... |
I have a basic docker-compose file file for wurstmeister/kafka
I'm trying to configure it to use SASL_PLAIN with SSL
However I keep getting this error no matter how many ways I try to specify my jaas file
This is the error I get
[2018-04-11 10:34:34,545] FATAL [KafkaServer id=1001] Fatal error during KafkaServer start... | docker-compose wurstmeister/kafka failing to parse KAFKA_OPTS |
You would use AWS EventBridge to schedule the task, andtrigger an AWS Lambda function(which you can write in Python) to perform your task. You will only be charged for the time the Lambda function is running.There are other solutions such as triggering an ECS Fargate task, instead of a Lambda function, but your specifi... | I would like to create a scheduled task in AWS and only pay for it when it runs. What I would like to accomplish is at a certain time, on a certain each week, I want to log in to a website and perform some very simple tasks. If I were writing a script, I would write this in Python, but I'm not sure how I would do this ... | How to create stand alone scheduled task on AWS? |
Simplified: records are blobs of data and are passed around by value - i.e. by copying them - by default. TList<T> stores values in an array of type T. So, TList<TMyRecordType>.Add(R) will copy the value R into the array at position Count, and increment the Count by one. No need to worry about allocation or deallocati... |
I have to store a TList of something that can easily be implemented as a record in Delphi (five simple fields). However, it's not clear to me what happens when I do TList<TMyRecordType>.Add(R).
Since R is a local variable in the procedure in which I create the my TList, I assume that the memory for it will be relea... | Understanding memory allocation for TList<RecordType> |
It turns out to be a known issue which has a fix currently in beta:https://github.com/docker/for-mac/issues/371#issuecomment-262826610Thanks to one of the hyperkit contributors for pointing me in that direction.ShareFollowansweredMar 10, 2017 at 10:11AdamantishAdamantish1,93933 gold badges2020 silver badges2323 bronze ... | Dockerized database will no longer start because...FATAL: could not write lock file "postmaster.pid": No space left on deviceThere are hundreds of Gb available on my hard-disk although I do believesomethinghas run out of space. This problem first cropped up after a couple of attempts at restoring a 45Gb database from ... | Why has Docker volume run out of space? |
It's not certain, but it may help to quote where you use public_key, i.e.
curl -u 'username:password' \
-d '{"title":"Test Deploy Key", "key":"'"$public_key"'"}' \
-i https://api.github.com/repos/username/repository/keys
Otherwise it will be much easier to debug if you use the shell's debugging options set -vx ... |
Alright, here's what I'm trying to do. I'm attempting to write a quick build script in bash that will check out a private repository from GitHub on a remote server. To do this a "hands off" as possible, I want to generate a local RSA key set on the remote server and add the public key as a Deploy Key for that particul... | Using cURL to send JSON within a BASH script |
+50You can do it manually, and create a script to make it simple:Create a Dockerfile for each project (dotnet core only of course). You can use Add -> Docker supportBuild docker with your solution (with VS or not)Push it to docker repository using docker push command (I'm almost sure that you are using private hub in A... | I'm trying out theKubernetes tools for Visual Studio. I want to enable Kubernetes support on a Console application, but it won't let me. It only seems to support ASP.NET applications (web/API).Why is this?My project consists of a number of Console programs that stand up gRPC endpoints for comms. Why does the tooling on... | Why can't I add Kubernetes support to a .NET Core Console project? |
You can use python to access GitHUb V3 Api (as in "Most suitable python library for Github API v3").And you canaccess GitHub repos, from a certain id (GET /repositories, with as parameter, integer ID of the last Repository that you’ve seen: so that can provide a roundabout way to access repos with their id. | I'm looking for a solution to randomly sample repos from Github. The final result is to perform some data analysis on the sample.What I would like to do is sample by the repository's id: sample an int between 0 and 2.7 million and find the associated repo. After I have the username/repo-name, I'll use the api to get de... | Randomly sample Github repositories |
You need to define a function in your code. The code is missing the function named lambda_handler. Your code should look like:
import botocore
import boto3
def lambda_handler(event, context):
s3 = boto3.resource('s3')
bucket = s3.Bucket('bucketname')
exists = True
try:
... |
My apologies for basic question. I am completely new to AWS as well as Python. I am trying to do sample code given in https://boto3.readthedocs.io/en/latest/guide/migrations3.html#accessing-a-bucket but facing a error.
import botocore
import boto3
s3 = boto3.resource('s3')
bucket = s3.Bucket('bucketname')
exists = Tru... | Missing handler error in AWS Lambda |
git checkout master # go to master since that’s your target branch
git merge Epic_1 # merge in the first branch
git merge Epic_2 # merge in the second branch
This will give you a result that looks approximately like this:
(old) master master (after merges)
↓ ... |
Currently I have a scenario where I want to locally merge two branches to a third branch. So the scenario is. FYI I am a noob in github.
Master --> Epic_1
Master --> Epic_2
Now I want to merge Epic_1 branch first to Master and then merge Epic_2 branch to master on top of merged Epic_1 and Master. I am not sure what ... | Merge three github branches locally |
By default, users aren't confirmed in Cognito User Pools, so you need to do this manually if you don't want them to go through the email or phone verification process.To do this, you can set thePre sign-uptrigger to call a Lambda function with this code:def lambda_handler(event, context):
event['response'] = {
... | I'm using Cognito for user registration and authentication. I would like users to be able to register and login without having to verify their email address (there will be a separate process for this)I have setup my Cognito User Pool to not require either email or sms verification, but when I make the following call I ... | Cognito without Verifying Email |
1
you can follow like this:
server {
listen 80;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
try_files $uri $uri/ @router;
index index.html;
}
location @router {
... |
I am setting up vue(2.1.x) with nginx(1.10.2), I have following configuration:
location / {
root /var/lib/myRepo/dist/;
index index.html;
}
This works when I hit 'http://localhost:8080/', but when I hit other URLs like: 'http://localhost:8080/products/home', I get:
404 Not Found
I also tried following:
r... | vue with nginx: path not matching |
You created a self-signed certificate without a CA, and it's the CA you need to trust in your keychain. There's an app that can automate all of this for you,mkcert | I'm trying to generate aself-signedcertificatefor developmentSSLuse. This is what I'm using, which creates both thecrtand thekey:openssl genrsa -rand -genkey -out pass1.key 2048
openssl req -new -x509 -days 365 -key pass1.key -out pass1.crt -sha256Thenginx.confblock entry for thatvhostis as follows:listen ... | Mac OS El Capitan VHost Self-Signed Cert Creation & Use in nginx |
You must define project artisan file in cpanel cron command/usr/local/bin/php /path/to/project/artisan schedule:run >> /dev/null 2>&1 | I have implement laravel queues to my application but facing issues with scheduling cron jobs with cPanel in shared hosting .The directory structure on shared hosting is:Projectpublic_htmlproject/app/console/kernel.php
There I have updated schedule command./**
* Define the application's command schedule.
*
* @param ... | Laravel schedule job on cpanel shared hosting not working |
You only need to specify the CAA record on the domain name. It's not required for subdomains.Besides that, I have noticed Certificate Manager sometimes being annoying if I did not add al4 AWS CAAvalues.0 issue "amazontrust.com"
0 issue "amazon.com"
0 issue "amazonaws.com"
0 issue "awstrust.com"Try adding all of them to... | I'm trying to create a new cert in my AWS instance for a test domaintest.wordle.starwars.guide. My domain is hosted with Namecheap.comAccording to Google's Toolbox, I have the CAA record, seehttps://toolbox.googleapps.com/apps/dig/#CAA/*.test.wordle.starwars.guide. This link Namecheap provided to me showing it's workin... | AWS Cert Manager errors "failed validation due to CAA error" |
Unfortunately the Nginx Api Gateway is featured only in Nginx Plus. But there isKong, an alternative that is built on top of Nginx and is also open source.There is even a post on Nginx's official blog about it:https://www.nginx.com/blog/nginx-powers-kong-api-management-solution/Edit: The blog post has been replaced by ... | Does NginX(Open source, not Nginx plus), supports API Gateway?
Please, help me get to the valid documentation or information. Thank you! | Does NginX(Open source, not Nginx plus), supports API Gateway? |
The problem in the syntax here is related to how you used the-symbol.With Github actions, you need at least arunorusesfield inform for each step inside your job, at the same level of thenamefield (which is not mandarory), otherwise the github interpreter will return an error.Here, from line 22, you used something like ... | I am actually implementing CI/CD for my application. I want to start the application automatically using pm2. So I am getting the syntax error on line 22.This is my yml fileThis is the error I am getting on github | Where actually is the syntax error in my github actions yml file |
While @ilyapt is right, and you should separate the nginx and node into two containers, this is not the answer to your question. What you should do is omit the start from your docker cmd, to prevent forever from running in the background - causing the container to exit.
Try changing your last line in the dockerfile to... |
I have docker image that consist of nginx to server my index.html file with the following config:
server {
listen 80;
server_name mysite;
root /var/www/application;
index index.html;
}
No I need to add nodejs to handle /api/ location just like the following:
upstream api_node_js {
server 127.0.0.1:3000;
}... | How to run nodejs inside container correctly? |
27
It could be a permission issue. try updating permissions.
sudo chown $USER docker -R
chmod 775 -R docker
Share
Follow
edited Dec 9, 2022 at 4:27
Matt Gaunt
9,64233 gold badges3737 silver badges575... |
History:
I was able to get read/write to my local DynamoDB environment.
I followed the AWS Documents for Downloading and Running DynamoDB: http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/DynamoDBLocal.html
Issue:
I had an accidental power outage to my computer.
Now, I get the following error after I la... | Unable to open (Local DynamoDB) database file after power outage |
Your regex seems incorrect, use this:RewriteRule ^twitter/([0-9a-zA-Z]+)(?:/([a-zA-Z]+))?/?$ show.php?acc=twitter&username=$1&output=$2 [L,NC,QSA] | i want to be able to have both these addresses with one ruletwitter/myusername => show.php?acc=twitter&username=myusernbame
twitter/myusername/json => show.php?acc=twitter&username=myusernbame&output=jsonthis is what i've wrote so far and it doesn't work ... the thing is the second parameter(json)may or my not... | rewriting rule for a parameter that may or may not be in the link |
-1http://domain.com/is equivalent tohttp://domain.comyou cannot redirect your url from:http://www.domain.comtohttp://www.domain.com/ShareFolloweditedJul 31, 2014 at 19:31answeredJul 31, 2014 at 16:31killsarcasmkillsarcasm5133 bronze badges3How I can do this? Skype?–DeifingerJul 31, 2014 at 17:15Now I have problem with ... | Good afternoon!I need add trailing slash to domain name. For example: fromhttp://www.domain.comtohttp://www.domain.com/. I try to add settings to .htaccess:RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_URI} !(.*)/$
RewriteRule ^(.*)$ /$1/ [L,R=301]but Wordpress trims trailing slash only in domain name, othe... | Add trailing slash to domain name |
Real sh doesn't have source, only .. Either change the shell in cron to bash, or use . instead.
|
My cron :
45 10 * * * source /home/ThinkCode/Test/hello.sh
hello.sh :
#!/bin/bash
echo "helloworld"
The error it emails me :
/bin/sh: source: not found
What am I doing wrong? It is configuration/environment specific, so Googling didn't help much! Thanks..
| Help with basic shell script. /bin/sh: source: not found |
It turned out that because I was using an SSL certificate on the elasticache cluster and the SSL certificate was bound the the master. endpoint whereas I was trying to connect to the CNAME, the certificate validation was failing.
So I ended up querying the Route53 record within the code to get the master endpoint and ... |
I have an Redis ElastiCache cluster that has a FQDN for the primary node in the format: master.clustername.x.euw1.cache.amazonaws.com. I also have a Route53 record with the CNAME pointing at that FQDN.
I have a .net core lambda in the same VPC as the cluster, with access to the cluster via security groups. The lambda ... | Why is my lambda not able to talk to elasticache? |
Currently, this is not possible. There have been multiple requests to add such functionality, but the maintainers do not consider this a good idea.
See:
https://github.com/docker/compose/issues/468
https://github.com/docker/compose/issues/1341
https://github.com/docker/compose/issues/6736
|
I am running a dockerized django app and I am looking for a way to run (a) directive(s) every time before I build a docker container. More concretely, I would like to run docker-compose -f production.yml run --rm django python manage.py check --deploy each time before I either build or up the production.yml file and s... | Setting pre-hook for docker-compose file |
It's probably because file "C:\Documents" does not exist. You probably want this:
-r "C:\Documents and Settings\Administrator\My Documents\a.sql"
^ ^
|
I wrote the below line to create a mysql backup , for some reasons i'm getting Errcode 13 .
E:\Xampp\xampp\mysql\bin\\mysqldump -u root --add-drop-database -B project_db -r C:\Documents and Settings\Administrator\My Documents\a.sql
Why does the above line fail to execute ? I'm trying to create a DB backup using the... | Mysql backup error |
The point of a reverse proxy like nginx is that you can host multiple applications on it, regardless of what internal port they use. So you can easily host applications on ports 5000, 5001, 5002, etc. and then make nginx expose all those applications on different domains on port 80, or even as subpaths of the same dom... |
I want to run two or more asp.net core applications on the same server. But the ip and port they use are 127.0.0.1:5000.
| How do I run more than one asp.net core application on Nginx server |
1
The folders /obj and /bin should be excluded from image build process by adding file .dockerignore:
.dockerignore
# resolve this issue
**/bin
**/obj
# recommended options
.dockerignore
.env
.git
.gitignore
.vs
.vscode
docker-compose.yml
docker-compose.*.yml
_ReSharper.Cac... |
I am trying to build a docker container comprising a ASP.NET core web site. When trying to build the container, I am getting errors about duplicate Razor*Attributes. I have suppressed generation of AssemblyInfo in the project file. I have found solutions online which call for removal of \bin \obj and the folders gener... | Duplicate RazorLanguageVersionAttribute building container |
1
Another approach is that you can build your Dockerfile based on FROM ubuntu:20.04 where Python 3.8 is set as default (here). Then, install java and pip later.
FROM ubuntu:20.04
ENV JAVA_HOME /usr/lib/jvm/java-8-openjdk-amd64/
RUN apt-get update -y \
&& apt-get install -... |
Below is my Dockerfile
FROM python:3.8-slim-buster
WORKDIR /app
RUN python --version
RUN apt-get install java-1.8.0-openjdk-devel
RUN python -m pip install --upgrade pip
RUN pip install --default-timeout=100 pyspark
I want to install java 8 and set JAVA_HOME variables. But when I am trying to build above image I am g... | How to install java 8 using dockerfile in python:3.8-slim-buster base image |
First, lets make some things clear:Git is commonly referred to as the command line program that you use to commit, push, diff etc. This is a tool you need to install locally on any computer that uses Git.Git also has aserver application. This is an application you will need to "host" a Git repository. When you have thi... | I'm trying to create a project where, i'll have a list of selectable files on my website/command line interface and then the user can select the file (which will be say java code) and then they can essentially download it/fork it? then upload their modified version after(push)Im not asking for code but a rough outline ... | How to go about implementing Git/GitLab to your website to enable people to work on code? |
7
You do these steps:
git checkout -b your_branch
git push -u origin your_branch
show all branches (see result):
git branch
Reference: https://git-scm.com/docs/git-branch
Share
Follow
answered Oc... |
I'm learning Git and experimenting. I understand how to do basic operations but am struggling with creating a new branch. I'm using the command prompt in windows and the github tool in a browser. I have attempted to simulate the creation of a new branch by making a new branch (named branch_1) in the browser, but when ... | How to create a branch in GitHub |
Update on 2016-04-27AWS officiallyannounced this in February 2016:You can now create triggers that send Amazon SNS notifications before, during, and after the deployment process for your applications. Triggers can be set for the deployment as a whole or for the individual instances targeted by the deployment, and are s... | I'd like to build a tool that would notify a user each time there was a successful or failed build on CodeDeploy through any communication medium (email, slack, etc). I've went through their documentation.. and nothing except for long-polling comes to mind. Any idea if there's some webhook option where i can register a... | Get notified of successful/failed builds on Amazon's CodeDeploy |
well, the easiest way - make pods write their identity in the response, that way you will know which pod responds. Another way - implement distributed tracing with Zipkin\Jaeger. That will give you deep insights into networking flows.I believe kubernetes doesnt offer any sort of built-in network tracing. | I used this Deployment.yml to create pods.apiVersion: apps/v1
kind: Deployment
metadata:
name: price-calculation-deployment
labels:
app: price-calculation
spec:
replicas: 2
selector:
matchLabels:
app: price-calculation
template:
metadata:
labels:
app: price-calculation
spec... | How do I know which pod processes the request? |
Problem solved thanks to @signorpieroref.My solution: From project path execute these two instructions:php artisan sail:install~/Documents/__laravel_projects/testApp$ php artisan sail:install
..../vendor/bin/sail up:~/Documents/__laravel_projects/testApp$ ./vendor/bin/sail up
...
[+] Running 12/13
... | trying to launch a laravel project with sail:~/Documents/__laravel_projects/testApp$ ./vendor/bin/sail upI get this error message:no configuration file provided: not foundversions: Ubuntu 22.04, Laravel Framework 9.20.0, Docker Desktop 4.10.1Does anyone know how to fix the problem.Thanks! | Laravel Sail problem "no configuration file provided: not found" |
A private repository means you need to authenticate in order to execute your query (here getting the commits).This should work, if you own the private repo:curl -u 'username:password' https://api.github.com/repos/:owner/:repo/commits | I need to retrieve all commits from Private repositories on github.I already tried with with github API documentation. It provides the API for retrieving the public repository commits.https://api.github.com/repos/:owner/:repo/commitsAnybody can help me for taking all commits from private repositories? | Retrieve private repository commits from github |
17
Expiration times are useful when you don't need precise information, you just want it to be accurate to within a certain time. So you cache your data for (say) five minutes. When the data is needed, check the cache. If it's there, use it. If not (because it expired)... |
Memcached provides a cache expiration time option, which specifies how long objects are retained in the cache. Assuming all writes are through the cache I fail to understand why one would ever want to remove an object from the cache. In other words, if all write operations update the cache before the DB, then the cach... | memcached expiration time |
.gitignoretells which files you don't want in the repository. If youdoput a file in the repository, then git is going to track it. It's quite contradictory to tell git I don't want to track this file (via.gitignore), but I also want to track this file (by adding it to the repository).There are ways to makegitnot commit... | I have a simple problem with my git :I have this fileinc.conf.phpon my repository on github.
I don"t want to delete him from the repo, it's a basic config file.Now, on my local repo, I have the same fileinc.cong.phpwith my own config, and I don"t want this file will be commited.So I create a .gitignore and I addinc.con... | Gitignore does not update a file already on my repo |
Checkrateandirate.Read also robustperception blogpost | Trying to figure out how to smooth this metrics over 5m so data is not so jumpy. Current metric shows the worker utilization by taking worker used divided by number of workers.
http_Stats_Resque_worker_main_working{app_name='workflow'}/http_Stats_Resque_worker_main_total{app_name='workflow'} | Prometheus Smoothing Utilization Metric |
1
You might want to try to reload your MainView, before you start the flip, so that there is no blank screen to wait for. That does mean that your flip will be delayed, but maybe that is better?
If you want to reload your MainView before you head to it, try to access MainV... |
The app in question has a MainView->ModalView pair. The ModalView is shown via UIModalTransitionStyleFlipHorizontal. In case of didReceiveMemoryWarning, MainView is dumped (since it is not visible) and the app stays "alive" but when you flip back there is a (very) short period of time when the screen is blank (since t... | iPhone app: recover view after didReceiveMemoryWarning |
-v /Users/M/Projects/Docker/nginx-example/nginx.conf:/etc/nginx:ro
you are attempting to mount a file to a directory - change that to:
-v /Users/M/Projects/Docker/nginx-example/nginx.conf:/etc/nginx/nginx.conf:ro and you should be fine. Take a look at the examples in the Docker Volumes Docs
As well, pwd should work in... |
I'm trying to run nginx within a docker container whilst mounting the configuration and static html files for it to serve up. Very simple stuff as far as I'm aware, but I keep getting an error about the directory not being a directory?
I'm running this example on my Mac using the latest version of Boot2Docker.
I have ... | Mounting nginx conf as a docker volume causes system error boot2docker |
As you can seehereit is not possible by intention:Secret, configMap, downwardAPI and projected volumes will be mounted as read-only volumes. Applications that attempt to write to these volumes will receive read-only filesystem errors. Previously, applications were allowed to make changes to these volumes, but those cha... | I define a Secret:apiVersion: v1
kind: Secret
metadata:
name: mysecret
type: Opaque
stringData:
config.yaml: |-
apiUrl: "https://my.api.com/api/v1"
username: Administrator
password: NewPasswdTest11And then creating volume mount in Deployment:apiVersion: apps/v1
kind: Deployment
metadata:
name: k8s-web... | Write to Secret file in pod |
<div class="s-prose js-post-body" itemprop="text">
<p>You should always use <code>$document_root</code> instead providing root path everywhere</p>
<pre><code>fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
</code></pre>
<p>And check if your php-fpm process is running, for example if you are using sys... | <div class="s-prose js-post-body" itemprop="text">
<p>This is config of <code>nginx.conf</code></p>
<pre><code>http {
include mime.types;
default_type application/octet-stream;
keepalive_timeout 65;
server {
listen 80;
server_name localhost;
location / {
... | How to Configure Nginx to Execute PHP |
30
What you need is the following:
aws s3 cp s3://example-bucket/file.tar.gz - | tar -xz
This will stream the file.tar.gz from s3 and extract it directly (in-memory) to the current directory. No temporary files, no extra storage and no clean up after this one command.
Ma... |
To elaborate,
There is a tar.gz file on my AWS S3, let's call it example.tar.gz.
So, what I want to do is download the extracted contents of example.tar.gz to /var/home/.
One way to do it is to simply download the tar.gz, extract it, then delete the tar.gz.
However, I don't want to use space downloading the tar.gz fil... | AWS CLI - is there a way to extract tar.gz from S3 to home without storing the tar.gz? |
This error was caused because your IP was not added in the SQL server tab(azure portal). So you must add the IP address of your SQL Server on Azure portal | My app is running locally without any issue but when I try to run it from Azure console I have the following error :An error occurred while starting the application.
SqlException: Cannot open server 'Server-name' requested by the login. Client with IP address 'w.x.y.z' is not allowed to access the server. To enable acc... | Error loading my web app after deploying .NET Core console app to Azure |
It is only a limitation for a private repo. It means 5 people can collaborate on that project (ex: use the wiki/issue tracker/push/pull/fork within github)
Once you have your own local clone of the repo, you can push it wherever you want and give anyone permission to clone it, but you have to do it "outside" the gith... |
If I understand correctly one of the advantages of Git is that everybody has the full repository.
This allows one person to get a repository and once he has that repository, another person can come and sync with the first person without the need of going to the main repo.
In Github some plans are limited to 5 collabor... | Why github have a limit on users? Can other users sync from the other user repo? |
1
It's just easier to use frameworks like PyTorch or Tensorflow.
If not, you can try pycuda or numba, which are closer to "pure" GPU programming. That's even harder than just using PyTorch.
Share
Improve this answer
Follow
... |
I'm new to google colab.
I'm trying to do deep learning there.
I have written a class to create and train a LSTM net using just python - not any specific deep learning library as tensorflow, pytorch, etc.
I thought I was using a gpu because I had chosen the runtime type properly in colab.
During the code execution, ho... | How to activate google colab gpu using just plain python |
microk8s has a private registry which can be used for this purpose.You must enable the registry prior, with the following command$microk8s.enable registryThe registry maps the traffic to port 32000, so you will have to push your docker image to the registry. If the image is already present in local you can use docker t... | I have been using minikube to test Kubernetes locally. In minikube, we can use local docker images by usingeval $(minikube docker-env)command.I started to explore microk8s. Installed microk8s using snap on my machine running on Ubuntu 18.Is there any way to use local docker images with microk8s like we use minikube for... | How to use local docker images with microk8s? |
The only artifacts relating to Comodo will be the SSL certificate and key listed in your nginx.conf files (ssl_certificate_key and ssl_certificate and parameters).Once you enroll for a certificate via Let’s Encrypt (check outhttps://github.com/Neilpang/acme.sh) you can update your Nginx config to point at those files a... | I would like to learn some approach for doing the following:
I must remove ComodoSSL certificate from some nginx running on ubuntu 18. I want to eliminate as much traces as possible from Comodo. After the removal process Letsencrypt will be used to generate a free certificate. Someone has a similar question but consid... | Recommendations to remove SSL certificate and generate one with Letsencrypt NGINX on ubuntu 16 |
If you use a minikube, this feature is disabled.When using VirtualBox as hypervisor, you can also use the VirtualBox NAT port forwarding feature to allow access to services exposed through NodePorts from outside.Something like this (limited range, exposing the entire default NodePort range of 30000-32767 takes forever.... | I installed the Kubernetes (minikube) cluster on Linux Mint. Then I deploy the demoExample: Deploying WordPress and MySQL with Persistent Volumes.apiVersion: v1
kind: Service
metadata:
name: wordpress
labels:
app: wordpress
spec:
ports:
- port: 80
nodePort: 30375
selector:
app: wordpress
tier:... | How can I access the Kubernetes service from the Internet? |
I would cherry-pick that one commit.git checkout master
git cherry-pick G
git cherry-pick H (EDIT 3)
git cherry-pick I (EDIT 3)
git branch -D developEDITI didn't see that you don't want E. Then it would be:git checkout master
git reset --hard HEAD^1
git cherry-pick G
git cherry-pick H (EDIT 3)
git cherry-pick I (ED... | I have the master branch like this:A->B->C->D->EThe develop branch like this:A->B->C->D->E->F->G->H->I
^
|- This should be usedI want to applyGon top ofD. How can I do this?I tried this:git checkout develop
git rebase 82c7b6aBut that is giving me merge conflicts.My main goal is to ke... | How can I rebase from specific develop branch commit to specific master branch commit |
The easiest way would be to change prisma's endpoint to point to a different prisma server before you run prisma deploy. As of the time of writing, prisma has been renamed from prisma to prisma1. You can find more details here, so ensure you have prisma1 installed as a devDependency.
Prisma explains how to achieve the... |
I want to have a separate database for testing and development. What I’m trying to achieve is to have more than one Prisma service, one for testing and one for normal development.
This my docker-compose.yml file
version: '3'
services:
prisma:
image: prismagraphql/prisma:1.34
restart: 'always'
... | How can I setup more than one PRISMA service, one for testing and one for development |
8
These are end to end steps for fixing this problem:
Steps:
ssh-keygen -t ecdsa -C "[email protected]" (Same as what OP said)
pbcopy < ~/.ssh/id_ecdsa.pub
Go to Github -> Login -> Settings -> SSH & GPG Keys -> type "Xcode" for the title and command paste the RSA key
Go to... |
More than a question this is a sharing information post.
If you pull private repos via SSH, you should create an id_ecdsa because Xcode does not accept Ed25519 key, instead since github does not accept RSA-SHA1 anymore since yesterday.
https://github.blog/2021-09-01-improving-git-protocol-security-github/
To generate ... | Xcode can't handle key encryption Ed25519 |
What happens to the pod? Is it evicted?If the memory limit of a container is exceeded, the kernel's OOM killer is invoked and terminates the container's process. The Pod then starts a new container on the same Node.(CPU limits use a different mechanism (CFS Bandwidth Control) that throttles the processes' CPU cycles in... | I am searching for an specific information regarding kubernetes requests and limits and still didn't find an answer or just didn't understand quite well. Say I've defined two containers A and B for a single pod, both with its resources limits and requests:A:
RAM request: 1Gi
RAM limit: 2Gi
B:
RAM request: 1Gi
RAM limit... | What happens when a pod resource limit is not exceeded but a single container resource limit is? |
Normally, what you would do is to create a new JUCE component and draw the graph with your data in its paint method. Then if/when you want to update it, call repaint() on your component. So I would suggest the following steps:Create a new JUCE component (a new cpp class inheriting : component)Override the paint methodD... | I am working on a program(cpp) and I wanted to add visual graph to represent the data I got from my program, so I created a program in JUCE for the graph. The problem is that I am not very familiar with JUCE and I don't know how to connect the 2 programs.I thought about adding my original program to the JUCE part, but ... | How to connect juce graphic with different cpp program |
If you go to the pypi page of tensorflow 1.4, you can see, that only whl files up to python 3.6 are available. I am guessing that you are either using 3.7 or 3.8. That is why
pip install tensorflow-gpu==1.4.0
is not working for you. There simply is no installation candidate for tensorflow-gpu for python versions oth... |
I was tring to install older version of tensorflow gpu on windows 10:
pip install tensorflow-gpu==1.4.0
And I get an error like this other post impling there is no windows version
And I'm wondering if there is a way to get the list of functionning windows tensorflow version
Thanks in advance
Edits
It seems that te... | Install an older version of Tensorflow GPU |
7
It's not memory leak, and it's not undefined behavior.
In the function devicetype_string, whoami points to a string literal in all paths. String literals have static storage duration, they don't need to be freed.
Share
Improve this answer
... |
I have a device that can either be a "Router" or a "Switch". I use the below function, passing it an enum that returns me the string. My question is that the memory for whoami is allocated on the stack. When this function devicetype_string finishes, the stack is destroyed. Would this not cause an issue when i use a po... | Is this a memory leak since memory was allocated on stack? |
This is actually anissue of the projectand there are 2 working workarounds:Creating a data volume:docker create -v //c/Users/myuser:/myuser --name data hello-world
winpty docker run -it --rm --volumes-from data ubuntuSSHing directly in the docker host:docker-machine ssh defaultAnd from there doing a classic:docker run ... | How can I share a folder between my Windows files and a docker container, by mounting a volume with simple--volumecommand using Docker Toolbox on?I'm using "Docker Quickstart Terminal" and when I try this:winpty docker run -it --rm --volume /C/Users/myuser:/myuser ubuntuI have this error:Invalid value "C:\\Users\\myuse... | How to use --volume option with Docker Toolbox on Windows? |
I don't think you can perform what you want to do purely in.htaccessYou probably are looking for:RewriteRule ^([a-z0-9-]+)/([a-z0-9-]+)/([a-z0-9-]+)/?$ index.php?action=$1&item=$2&id=$3&quantity=$3 [NC,L]And inindex.php, you can determine whether $3 is an ID or a quantity.ShareFollowansweredOct 7, 2012 at 9:01sleepy_ke... | I have the following rewrite. The last one is par ID, but I want it variable, has to be ID or Quantity, is that possible?now:RewriteRule ^([a-z0-9\-]+)/([a-z0-9\-]+)/([a-z0-9\-]+)/?$ index.php?action=$1&item=$2&id=$3 [NC,L]must be:RewriteRule ^([a-z0-9\-]+)/([a-z0-9\-]+)/([a-z0-9\-]+)/?$ index.php?action=$1&item=$2&id=... | htaccess parameter |
It looks like you need to use Metal to do your rendering within CoreAnimation. According to Apple's Documentation, you'll do this by referencing theCAMetalLayerclass object, which inherits directly fromCALayer.That information is laid out here:https://developer.apple.com/documentation/quartzcore/cametallayerThere are ... | On machines with multiple GPUs, is it possible to programatically tell CALayer which GPU to use?I can't seem to find any information about this online or in Apple's docs. If you cannot choose, how is the appropriate GPU determined? | CALayer choose which GPU |
5
As I mentioned in my comment:
in the ssl.conf every call from port 443 is "proxyed" to port 80, so you never get https = on.
I did some tests and I found out that the ProxyPass directive in ssl.conf does not simply redirect every request from port 443 to localhost:80,... |
I'm having issues by forcing ssl. I'm using codeigniter and deployed it in AWS single instance with elasticbeanstalk. My htaccess rules below:
RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule !/status https://%{SERVER_NAME}%{REQUEST_URI} [L,R]
RewriteEngine on
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{RE... | AWS Elasticbeanstalk single instance Force SSL Redirect loop |
This is more or less a guess, since you didn't include one iota of version information about your spinnaker setup, but...According toat com.netflix.spinnaker.clouddriver.aws.provider.agent.ReservationReportCachingAgent$_determineVpcOnlyAccounts_closure2.doCall(ReservationReportCachingAgent.groovy:117) ~[clouddriver-aws... | When deploying Spinnaker to EKS viahal deploy apply, Spinnaker Clouddriver pod goes toCrashLoopBackOffwith the following error,Factory method 'awsProvider' threw exception; nested exception is java.lang.NullPointerException: Cannot get property 'name' on null objectMy Halyard config is like follows,currentDeployment: d... | Spinnaker Clouddriver pod goes to CrashLoopBackOff |
The different value for theenvlabel means that there's nothing to match on each side of the expression, so it returns nothing and there's no alerts. You can adjust this behaviour usingignoring:app_version{env="demo"} != ignoring (env) app_version{env="live"} | I'm new in prometheus, need help.I have custom metric on my 2 servers (just shows version of application):app_version{plant="dev",env="demo"} 55.119
app_version{plant="dev",env="live"} 55.211I want to compare this metrics and send ALERT if they are not equal trying for smth like this:alert: Compare
expr: app_version{en... | Compare 2 metrics in Prometheus |
First make sure, ssh keys are successfully created by executing the command:$ ssh -T[email protected]It should print"Hi Andrey-Bushman! You've successfully authenticated, but GitHub does notprovide shell access."If not, then refer toSSH Access to Git.Once done follow the steps below:clone the repo using ssh protocol as... | I use Git for Windows. I created SSH key and added it into the keys list of my GitHub settings accordingthis article. Now I try to use it, but I get the error:$ git push origin master
Username for 'https://github.com': Andrey-Bushman
Password for 'https://[email protected]':
remote: Invalid username or password.
fatal:... | remote: Invalid username or password. fatal: Authentication failed for |
You can add the following rewrite rule :RewriteRule ^([^\.]+)\.js$ js.php [NC,L]In place of :RewriteRule \.js$ js.php [L] ## This line is the one I tried to addThe result is :http://www.domain.net/myfile.js => http://www.domain.net/js.php
http://www.domain.net/foo/bar/myfile.js => http://www.domain.net/js.phpOr you c... | My attempt to do this is...<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteRule ^index\.php$ - [L]
RewriteRule \.js$ js.php [L] ## This line is the one I tried to add
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]
</IfModule>If I use a tag<script ty... | Javascript to a php handler page using htaccess |
Did you try $(Build.BuildNumber)?Any way, all the available build variables can be foundhere | I am using the new agent build system with TFS 2015 and TFS "15" and have SonarQube tasks in my build to do source code analysis.Now I would like to increase the version sent to SonarQube on every build. I tried the following to achive that:But that does not work - the version is sent to SonarQube as it is there and no... | Use variables in build step configuration |
4
Below are the steps you need to perform.
For API method - Make Auth = IAM
For API resource policy make sure you allow traffic coming from selected IAM role for specific/all methods
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Pri... |
I'm attempting to move a suite of end-to-end tests so that they are fully contained within AWS. I've done this through code build and gotten everything running up to the point of running the tests, which invoke an API to reset the database before every test run. I keep running into this error message when the first te... | How to authorise a role to perform "execute-api:Invoke"? |
1
I found. I share it to help you.
var cacheEntriesCollectionDefinition = typeof(MemoryCache).GetProperty("EntriesCollection", System.Reflection.BindingFlags.NonPublic | System.Reflection.BindingFlags.Instance);
var cacheEntriesCollection = cacheEntriesCollectionDef... |
How to list all the register keys from Memory Cache in the .NET Core web application?
| How to retrieve a list of Memory Cache keys in .NET Core? |
I would like to add some possibilities to @gasc answer
It would be better if you make a cloudformation template for deploying your EC2 resources with all required groups, auto scaling and other stuff.
Then Create the AMI with docker compose installed or any other thing you would be required for your ec2 enviroment.
... |
I've been trying to find an efficient way to handle continuous deployment with a Docker compose setup and AWS hosting.
So far I've looked into CodeDeploy, S3 buckets, and ECS. My application is relatively small with only 3 docker services, a Django app, NGINX, and PostgreSQL. I was unable to find any reliable inform... | Continuous Deployment of Docker Compose App to AWS/EC2 |
The problem is that nginx doesn't know what to do with/signin. You need to change your nginx config (usually in/etc/nginx/conf.d/) to serve yourindex.htmlregardless of the route. Here is a sample nginx config that might help:server {
listen 80 default_server;
server_name /var/www/example.com;
root /var/www/examp... | I am using React Router for routing for a multi-page website. When trying to go to a sub page directlyhttps://test0809.herokuapp.com/signinyou'd get a "404 Not Found -nginx" error (To be able to see this problem you might need to go to this link in Incognito mode so there's no cache). All the links work fine if you go ... | React Router BrowserRouter leads to "404 Not Found - nginx " error when going to subpage directly without through a home-page click |
Actually I have to fix that for you. It's
So basically whenever I create buffer objects Opengl allocates some memory.
You don't know – and it's invalid to make assumptions – about the whereabouts of where this memory is located. You just get the assurance that it's there (somewhere) and that you can make use of it.
... |
So basically whenever I create buffer objects Opengl allocates some memory on the GPU.
Consider scenario 1 where I generate 2 uniform buffers for 2 uniform variables.
Now consider scenario 2 where I create a single buffer and enclose the 2 uniform variables inside an interface block.
My understanding is that for sce... | Does OpenGL takes care of GPU memory fragmentation? |
You probably mean objects, not classes ;-)
A scalable processing architecture usually involves the following:
At any point in time, have only a limited number of objects in memory (could be one, could be ten, could be a hundred, but if it has to be "however many I'll need" then you must rethink your design). This ens... |
So i'm developing a server application, that has to store hundreds of thousands (up to a few million in some cases) of classes, serialize them to an SQL database, and load them back several times, and it appears that storing that many class objects to a List is whats throwing an out of memory exception? i think.
So th... | Building a scalable server |
this a working version of the code. thanks and hope it helps someone out there.files:
"/etc/cron.d/cron_process":
mode: "000644"
owner: root
group: root
content: |
* * * * * root /usr/local/bin/task_process.sh
"/usr/local/bin/task_proc... | Greetings fellow programmers,
I am currently using django-background-tasks(https://django-background-tasks.readthedocs.io/en/latest/)
to run some background tasks on AWS elasticbeanstalk. I initially use this command in the main .config container commands but I get timeout error in deployment because this management co... | django-background-tasks management command not running on AWS elasticbeanstalk |
The search API already does this. You can just use the search that you've posted above to search for repositories containing the text you've specified.For example...user:mrdoob language:JavaScript Three Extensionreturns this...https://github.com/search?utf8=%E2%9C%93&q=user%3Amrdoob+language%3AJavaScript+Three+Extensio... | Ingithub search, the following string allows me to searchJavaScriptcode that containAcodein all the repositories of the userNameOfUser:user:NameOfUser language:JavaScript ACodeNow, I would like toadd another condition: i am only interested in the code containingACodein the repositories whose namecontainsrepokey.Does an... | Search code in the repositories whose name contains a keyword |
The PATs seem to expire after a certain period of time. Is there a way to generate a PAT that lasts a long time?Asdocumented, a PAT only expires if you selected an expiration period at its creation:For creating issues, make sure you have selected only the scopepublic_repoorrepopermission on your Personal Access Token.p... | I have a website that displays records from a database. I have set up a feedback form so if someone spots a mistake in a record, they can report it so it can be set right. I use a Github Personal Access Token (PAT) to create a Github issue when the form is submitted, and then the appropriate team member is notified. It... | using Github personal access token on a public website |
+50Make sure theremoteProcessPickerScriptin your local.vscodedirectory matches exactly with the one in the master branch of the GitHub repository. Any deviation could cause syntax errors.# Compare local script with the remote one
diff "c:\...\.vscode\extensions\ms-dotnettools.csharp-2.10.28-win32-x64\scripts\remoteProc... | All of sudden I'm having issues with remote debugging via VS Code using launch.json and remote debugger installed in docker container for .net core project..The error msg clearly tells about what the issue is, which to me doesn't make any sense looking at the file comparing to the error pointing to. (the local file bei... | remote debugging pod in minikube via VS Code errors out with parsing error from remoteProcessPickerScript |
i think this one will workaffinity:
podAntiAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
- labelSelector:
matchExpressions:
- key: app
operator: In
values:
- <VALUE>
topologyKey: "kubernetes.io/hostname"For more reference you ca... | We are running our application with 3 pods on a 3 node kubernetes cluster. When we deploy out application, sometimes, pods are getting scheduled to the same kubernetes node.We want our pods to scheduled in such a way that it spread our pods across nodes ( no 2 pods of the same application should be same node). Infact, ... | Kubernetes pod affinity - Scheduling pods on different nodes |
0
You'll want to use the REST API for Google Drive. There are official client libraries for several languages, listed here
Authenticate your account via OAuth2. Depending on the client library you use, there are different tools to do this. I'm most familiar with the Python ... |
I'm using Google drive to store my daily made backup from my linux machine.
But i need a script that auto delete's the files in a specific folder after 7 days.
So that there are 7 backups in the folder.
The file that get's backup is called world-$(date +%d-%m-%Y).tar.gz
it replaces the %d %m and %Y with the day month ... | Google Drive, auto delete files older than 7 days in specific folder |
You need to double-check yourGitHub Pages publication sourceand, depending on said source, make sure you have committed in the right folderand pushedin the right branch.Only then would you see anything in your project GitHub page site. | I have been following Joshua Flukes video on how to make a portfolio with github pages but when i committed everything it doesn't show up. My github repo is:
Davecarranza.github.ioAny idea what could be wrong? | My new Github Page is not showing up. What am I doing wrong? |
I asked AWS support about this. They said they don't presently* support conditions in the assume_role/trust policy to limit which functions can assume the role by matching a function name pattern.
Instead, they suggested adding conditions to the execution policy (instead of the assume/trust policy):
{
"Version": "... |
I am concerned about security. The creation of IAM Roles is a high security risk, and the fact that you can only specify to be AWS Lambda the one that can assume a role is not good enough IMO. There could be a privilege escalation if not treated with care.
How can I create IAM Roles specific to some Lambda functions?
... | IAM Role limit sts:AssumeRole to one AWS Lambda function |
In general no - as it is autoreleased, its retained by the autorelease pool and that will release it when it goes out of scope. However, you can retain and then release it if you are in a situation where you need the extra security that provides.
|
I'm using ASIHTTPRequest library and I want to be sure if I use it in a good way from the memory management point of view.
I create:
ASIFormDataRequest *request = [ASIFormDataRequest requestWithURL:someUrl];
I guess that according to the naming convention I don't have to retain request object, right?
but when I look ... | Do I need to retain autoreleased objects? |
Probably yourdocker-composedoesn't exist in your $PATH env variable.First you should remove any conflictingdocker-compose-rm /usr/local/bin/docker-composeOn most of the Linux systems, below is how I prefer installing docker & docker compose -(Run commands as root)curl -fsSL get.docker.com -o get-docker.sh
sh get-docker... | I have a docker compose fileversion: "3"
services:
mysql:
image: mysql:latest
container_name: locations-service-mysql
environment:
MYSQL_ROOT_PASSWORD: root
MYSQL_USERNAME: root
MYSQL_DATABASE: 'locations_schema'
restart: always
volumes:
- mysql_data:/var/lib/mysql:rw
ph... | docker-compose: command not found on jenkins |
SQL Server from version 2008 include a built-in option for what you are looking for. It named CDC or Change Data Capture. You can get more information in the BOL (officially Book-On-Line) in the first link or from the blog in the sec link:https://technet.microsoft.com/en-us/library/bb522489(v=sql.105).aspxhttps://www.s... | I want to be able to audit activity that is performed on db tables (updates, inserts etc). What would be the most effective way to design this? One solution I have in mind is to have a audit table for every table and use SQL triggers to do a insert the previous value before the table is updated with a new value. | Designing a way to audit changes to tables |
3
Let's abstract ourselves from nginx. We should distinguish the webserver running alongside an application, from the reverse proxy routing client requests to that application.
In Kubernetes, you may deploy applications based on some Nginx, lighttpd, Apache, ... webserver. ... |
i am confused about Nginx Ingress vs Nginx deployment(container) in kubernetes
since both are controlling incomming requests to the cluster
let say i am deploying a web app container and nginx container in one pod and all works perfectly if i deploy an other application and use Nginx Ingress to route incomming reques... | Ingress Nginx vs Nginx deployment in kubernetes |
You can put a breaking point debugger in the code usingpdboripdb. Like this:def some_function():
# some code
import pdb;pdb.set_trace() # or use ipdb
# rest of the codeThen in shell, runpython manage.py crontab showto show cronjobs withids, then runpython manage.py crontab run <id>. It will hit the debugge... | I have a Django based web application, some functionality of the application is scheduled to be run as a part of cron jobs usingdjango-crontab. I want to hook a debugger so that I can inspect some odd behaviours of my code. I normally use visual studio code. Is it possible to hook a debugger, since cron jobs basically ... | How to hook a debugger to a python code running via django crontab? |
RenameChart.ymltoChart.yaml, then run again.Hereit expects the name should beChart.yaml | I'm in the learning phase of Helm. I'm trying to create helm chart with simple pod definition file. But it's failed with the below error.Note : If i'm trying to run this commandhelm install --values=ghost-values.yaml stable/ghost --generate-name. It works fine. Basically this download and install the chart from remote(... | Helm3 - validation: chart.metadata is required |
Change to.for jobId in JobIdsOT:
argumentList.append( (jobId, site) )
pool.map(assignTask, argumentList)pool.map(...expect only oneiterableand has to be called only once for all job's. | The code runs smoothly for quite some time, then suddenly it givesOSError: [Errno 12] Cannot allocate memorydef initialize(site):
global pool
if site == 'OT':
for jobId in JobIdsOT:
argumentList = [jobId, site]
pool.map(assignTask, [argumentList])
elif site == '... | Thread Pool giving OSError: [Errno 12] Cannot allocate memory |
You are trying to execute the Perl scripts with PHP by using the exact same FastCGI backend which you use for PHP. This will not work. The FastCGI backend for PHP will look for PHP code only and since there is none in the Perl scripts it will simply deliver the content the same it would do for HTML files.
Instead you ... |
I'm running NGINX on Centos 8 and I can't get it to execute a perl script, it just keeps downloading the script.
I have several domains on this server and it runs php scripts and such fine.
I have installed perl on the server,
"This is perl 5, version 26, subversion 3 (v5.26.3) built for x86_64-linux-thread-multi"
... | NGINX not executing perl scripts? |
Found it. The name of a cache with the useOrigin="true" attribute can be specified on the resolver:
<ivysettings>
<settings defaultResolver="main"/>
<caches>
<cache name="main" basedir="${ivy.settings.dir}/ivycache" />
<cache name="nocache" useOrigin="true" />
</caches>
<resolvers>
<chain name="mai... |
I have a <filesystem> resolver in my ivysettings.xml, along with the central M2 repository, and it all works OK. However, I was wondering whether there is a way to bypass the cache entirely for the dependencies found with the filesystem resolver. I don't need to have them so many times around on my filesystem (once in... | How can I use a <filesystem> resolver that doesn't copy artifacts to the cache in Ivy? |
This is not something you will be able to do through CLR Hosting. If you host the CLR, you can fulfill allocation requirements from the GC to Windows, e.g. so that instead of VirtualAlloc it uses some other allocator. However, the host is not invoked every time an object is allocated (this would be too expensive).
You... |
I'm loading several external assemblies into my application at runtime. And I need to limit an amount of memory that can be used by a specific class which is defined in each of the external assemblies, for example, 10 mb per instance, otherwise we get OutOfMemory.
I've googled what is the best way to do this and foun... | How to limit a memory that can be allocated by a specific class? |
Had the same issue, with the exact same configuration. I was able to resolve doing two things by wrapping theenvvars within astringconstructor - though not required its a good habit. Secondly, as I understand it latestreactrequires thatenvvariable require theREACT_APPprefix to each variable.export const firebaseConfig... | firebase react app deployment works fine when deployed using the command line. However, I am getting the following error when deployed using Travis.Below are my configuration files..travis.ymllanguage: node_js
node_js:
- 12.1.0
warnings_are_errors: false
install:
- npm install
script:
- npm run build
deploy:
... | Firebase Missing App configuration value: "projectId" (installations/missing-app-config-values) in ReactJs using travis |
This feature was added in Nexus 3.6. According tothe documentation:Under Security > Realms, enable the “Docker Bearer Token Realm”Uncheck “Force basic authentication” in the repository configuration | I'm using SonatypeNexusas a PrivateDockerRegistry.While it works with authenticated users, trying to use anonymous user to pull images doesn't work. This happens only on a docker client.Using theNexus UI(not logged in) I'm able to browse images on my repo. But trying to pull the images I get an 'Unauthorized' error.The... | Nexus Docker Registry - Failling anonymous pull |
Yes. Simply reference the issue number from anywhere in the commit message using #xxx.
You can also close issues this way.
|
This question already has answers here:
Link to the issue number on GitHub within a commit message
(8 answers)
Closed 9 years ago.
I think it would be useful to be able to look at ... | Is it possible to close out a github issue, and associate it to a commit? [duplicate] |
It's not clear to me what shell your runner is using here, but I suspect the (immediate) issue is because you have unbalanced quotation marks in your job script steps. For example:- 'env:NUGET_PATH" restore'The"is unmatched. | when i try to run the gitlab pipeline its failed and shows the eval: line 159: unexpected EOF while looking for matching error on gitlab pipeline this errorstages: # List of stages for jobs, and their order of execution
- build
- test
- deploy-uat
variables:
NUGET_PATH: 'C:\GitLab-Runner\nuget.exe'... | eval: line 159: unexpected EOF while looking for matching error on gitlab pipeline |
Write the code in .htaccess file in your project folder.it might be help for youRewriteEngine on
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME}\.php -f
RewriteRule ^(.*)$ $1.php | I have the following in my .htaccess file. Redirecting the www. works perfectly, as does the custom 404 message. The removal of .php from the file extension fails to work. domain.com/file returns the 404 message, with domain.com/file.php working fine.RewriteEngine On
RewriteBase /
#
RewriteCond %{HTTP_HOST} ^www\.(.*)... | unable to remove .php from file extension with .htaccess |
Your /tmp directory is full, first remove the files from your temp directory by issuing the command belowrm -rf /tmp/*Run your crontab againsudo crontab -e | I have attached a new volume to an EC2 instance. Volume was attached successfully.Below the output of command.df -hFilesystem Size Used Avail Use% Mounted on/dev/xvda1 32G 8.1G 22G 27% /none 4.0K 0 4.0K 0% /sys/fs/cgroupudev 2.0G 12K 2.0G 1% /devtmpfs 396M 34... | cronjob : No space left on device |
By default, Kubernetes 1.2.4 uses:Heapster: v1.0.2 (heapster-controller.yaml)Grafana: heapster_grafana:v2.6.0-2 (influxdb-grafana-controller.yaml)InfluxDB: heapster_influxdb:v0.5 (also defined ininfluxdb-grafana-controller.yaml)Take a look atthis directoryfor all the related configs. | May I know what image version for heapster, grafana and influxdb is stable for kubernetes 1.2? | Heapster, grafana, influxdb not working with kubernetes 1.2? |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.