prompt stringlengths 34 132 | completion stringlengths 22 4.64M |
|---|---|
Can you create a test plan for UK - NCS540 - 7.5.2 Regression with Target? | ISIS Change metric
Steps:
1) Change ISIS metric on an interface
Expected:
1) SPF run occurs, ISIS topology reflects new metric
ISIS overload-on-boot
Steps:
1) Reload the DUT and observe ISIS behaviour
Expected:
1) DUT should set the overload-bit in ISIS advertisement for the duration of the configured time. After this... |
Can you create a test plan for Performance - vFW FG with multiqueue enabled VM08? | Fortigate - UTM Inspection - HTTPS Throughput
Steps:
Identify the maximum limit of HTTPS Throughput at which FW continues to operate normally & observe the difference in performance when UTM inspection is enabled.
1. Generate HTTPS throughput from IxLoad for 15mins each run until you identify the FW's max Throughput... |
Can you create a test plan for Management & Outage - UK & Bluebird DCN ISR 4321? | DIS to save Config
Realtime traffic management via SavOne
Steps:
1. Check Connectivily with Uplink ASR1k Device.
2. Check if SavOne server route can be learnt from Uplink.
3. Check if DUT is discoverable from SavOne.
4. Check if interface and CPU related Performance can be fetched from SavOne.
Expected:
Realtime t... |
Can you create a test plan for Upgrade/Downgrade Fortianalyzer? | Device software upgrade
Steps:
1. Follow the upgrade steps.
2. Record pre & post-checks during the upgrade.
3. Create/update the MOP.
Expected:
After upgrade all ports, protocols and services should return to the same state as before the upgrade.
Device software downgrade
Steps:
1. Follow the downgrade steps.
2. ... |
Can you create a test plan for Manchester Geo Resilient -Outage? | Ta0-A to Ta0-B/Ta1-A-ma1/Ta1-B-ma0 link down while BNGs having traffic in shunt link
Expected:
Traffic should continue to flow.
Subs stability should not be impacted.
Minimum outage on traffic flow.
Ta0-A to Ta0-B/Ta1-A-ma1/Ta1-B-ma0 link down while BNGs having traffic in shunt link while primary BNG reloaded
Expe... |
Can you create a test plan for Interop FGT v7.0.8 build8611 with FMG 7.0.5 build 5944 "ADOM 7.0"? | Fortigate - FTG lost connectivity to FMG
Steps:
Capture the pre checks by taking snapshots of connectivity between FW and FortiManager
Break the path in the middle to loose the connectivity.
Check if the device is connected with FortiManager.
Check if the FW's normal operations are running smooth except being manage... |
Can you create a test plan for RTBH - Test Run? | RTBH - Scenario 1 - Blackholing traffic at P&T router
Steps:
1) Add 5607:667 community in Radware for P&T RTBH Scenario 1.
2) Verify community imported on P&T DUT router.
3) Verify IPv4 and IPv6 host route are being black holed and imported with 5607:667 community from Radware and next-hop is null
Expected:
After... |
Can you create a test plan for NCS5500 SMU rollup 7.3.2-V4? | ISIS change level 2 metric on interface
Steps:
SPF run occurs, ISIS topology reflects new metric
Expected:
SPF run occurs, ISIS topology reflects new metric
ISIS overload bit/ISIS overload bit on startup
Steps:
Verify OL bit/OL bit on startup functionality and that DuT acts correctly when receiving an LSP with OL bit ... |
Can you create a test plan for ipv6 multipath Tests on Ta and on CDN AGG? | Configure BGP PIC and Ipv6 Multipath
Steps:
Configure the following on the device under test which is an NCS5500 in 7.3.2 software version
1) enable hw-module profile command given below , which will cause the device to reload.
hw-module fib bgp-pic multipath-core enable
commit label en_hw_mp
exit
... |
Can you create a test plan for Interface? | Demonstrate 10GE Digital Optical Monitoring
Steps:
- Demonstrate 10/100 GE Digital Optical Monitoring /Digital Diagnostic Monitoring functionality and low light alarms
- Failure of one of the four pairs making up an 10/100 GE – SR/LR optics
Expected:
Light levels can be queried via CLI and SNMP. Low light alarm trap s... |
Can you create a test plan for Ireland - ASR 9902 - 7.7.2 Regression? | ISIS change level 2 metric on interface
Steps:
SPF run occurs, ISIS topology reflects new metric
Expected:
SPF run occurs, ISIS topology reflects new metric
ISIS suppress all interfaces except passive loopback0/system interface
Steps:
Only the loopback/system address appears in the IGP, none of the connected interface... |
Can you create a test plan for 2023 - IT - BNG - VPWS new resiliency mecanisme? | Check the VRRP and BGP failover mecanism on old 480 chassis
Steps:
Set up session
Check the different resiliency scenario described in this confluence page :
Simulate several port failure and check the fail-over from br0 to br1
with 4 lc if possible :
![](index.php?/at... |
End of preview. Expand in Data Studio
README.md exists but content is empty.
- Downloads last month
- 26