url
stringlengths 13
4.35k
| tag
stringclasses 1
value | text
stringlengths 109
628k
| file_path
stringlengths 109
155
| dump
stringclasses 96
values | file_size_in_byte
int64 112
630k
| line_count
int64 1
3.76k
|
|---|---|---|---|---|---|---|
https://osoyoo.com/2023/03/29/nodemcu-lesson-14-remote-control-the-4-digit-7-segment-led-display/
|
code
|
In this lesson, we will show how to use a UPD APP to remote control a TMP1637 4-digit display. We can send a command via the UDP protocol, the NodeMCU will receive and display some messages on a 4-digit 7 segment LED device.
|NodeMCU||4 digital display|
Connect the NodeMCU to computer via USB cable,open this sketch by using Arduino IDE(Version1.6.4+):
Edit the code to fit your own WiFi settings as following operations:
#define STASSID “***” // replace *** with your wifi SSID
#define STAPSK “***” // replace *** with your wifi password
Find above code line,put your own ssid and password on there.
2)UDP local port Settings
// Define the local port to listen on
unsigned int localPort = 8888;
We use the “8888” local port here, you can change it to your own local port.
3)Boad & COM Port Settings
After do that,choose the coresponding board type and port type as below,then upload the sketch to the NodeMCU.
About how to config the UDP APP,check this link.
Click the setting icon button, you can see the UDP configration page.
UDP response text display enable button – Enable text play
UDP Incoming Port – Use this port to listen for and accept connections from remote UDP devices, keep the default setting : “8888”
IP address – Change it to your NodeMCU IP address, you can get the IP address from the Arduino IDE Serial Monitor after the code upload down.
Port – Keep the default setting: “8888”.
Keep other settings as default, then click the “Save” button to save your changes.
Upload the code to Arduino board, then open Arduino Serial monitor in the upper right corner.
Now please set your Baud Rate to 115200
you will see NodeMCU IP address as following:
You can also see the 4-digit display as below:
Above result shows your NodeMCU IP address (in my case, 192.168.0.19) , NodeMCU is now waiting for UDP message at port 8888.
Onece the upload done,if wifi hotspot name and password setting is ok and UDP APP is connected, open the Serial Monitor, you can check which button has been pressed.
When you click the “F1” button, you can see the number “1” on the display.
If you click the “F8” button,
And you will see it displays number “8”.
At this point of the experiment, it is easy to find that the eight buttons “F1-F8” on the UDP APP correspond to a number, and when we press a button, the number will appear on the text display bar and the four-digit digital tube of the APP respectively.
What if I need to send other information? You can try to change the code by yourself and learn more through examples and library files
Question A: Why could OSOYOO IoT APP send message to NodeMCU without even knowing the IP address of the NodeMCU board?
Answer: OSOYOO IoT APP default destination IP is 192.168.1.255 which is a broadcasting IP address. Broadcasting means the APP will send UDP message to all device in the same Wifi Network.
So even we does not set destination IP address to NodeMCU IP, the NodeMCU can still get the message.
Question B: Can I change default sending destination IP address and Port Number of OSOYOO IoT APP?
Yes, you can! Osoyoo IoT APP default IP is 192.168.1.255 and default port is 8888. If you need to change the setting,
For example, if our NodeMCU IP address is 192.168.0.8, here is the guide to make the change to 192.168.0.8:
1)Open APP, click Setting button in upper right corner
2)Use 192.168.0.8 to replace default IP 192.168.1.255
3)keep default port number 8888 without changing
4)turn on the switch of UDP Response Text Display
5)Click Save button to save the changes you just made
6)Click Back Arrow to go back APP front UI
Question A: I touched my APP F1 key, but no message shows up in my NodeMCU serial monitor, why?
Sometimes, broadcasting IP Address is not necessarily 192.168.1.255, for example, if your NodeMCU IP address is 192.168.0.8, the wifi network broadcasting IP is 192.168.0.255.
So we suggest you replace 192.168.1.255 with 192.168.0.255 to match your network mask of NodeMCU. Of course you can directly set the NodeMCU IP as destination in APP.
If you have any question about OSOYOO NodeMCU products, feel free to contact us or leave comments here.
In next lesson, we will connect a sensor to NodeMCU and send sensor data to another Moquitto client software.
We need to note that ESP8266 is a 2.4G WiFi device, please access to 2.4G network, if you access to a 5G router network, there will be a prompt that the network connection is not successful.
DownLoad Url osoyoo.com
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-23/segments/1685224655027.51/warc/CC-MAIN-20230608135911-20230608165911-00632.warc.gz
|
CC-MAIN-2023-23
| 4,496
| 50
|
https://readthedocs.org/projects/prelude-siem/
|
code
|
Prelude-SIEM Prelude-SIEM is brought to you by CS (http://www.c-s.fr) under GPLv2 license : https://www.prelude-siem.org Prelude is an agentless, universal, and hybrid security information and event management (SIEM) system. Prelude collects, normalizes, sorts, aggregates, correlates and reports all security-related events independently of the product brand or license. Security events are normalized to an IDMEF format, allowing native support with almost all security related event from an IT equipment. While a malicious user (or software) may be able to evade the detection of a single IDS (NIDS, HIDS, etc.), it becomes exponentially more difficult to get around the defenses when there are multiple protection mechanisms. Prelude SIEM comes with a large set of sensors, each of them monitoring different kind of events. Prelude permits alert collection to WAN scale, whether its scope covers a city, a country, a continent or the world. Prelude claims that it is a SIEM system capable of inter-operating with all the systems available on the market. It is natively compatible with: AuditD, Nepenthes, NuFW, OSSEC, Pam, Samhain, Sancp, Snort, and Suricata but anyone can write its own sensors or utilize some of the 3rd party sensors that are available, given Prelude's opened APIs and librairies.
5 years ago passed
.. image:: https://readthedocs.org/projects/prelude-siem/badge/?version=latest :target: https://prelude-siem.readthedocs.io/en/latest/?badge=latest :alt: Documentation Status
<a href='https://prelude-siem.readthedocs.io/en/latest/?badge=latest'> <img src='https://readthedocs.org/projects/prelude-siem/badge/?version=latest' alt='Documentation Status' /> </a>
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-49/segments/1669446710690.85/warc/CC-MAIN-20221129064123-20221129094123-00399.warc.gz
|
CC-MAIN-2022-49
| 1,683
| 4
|
https://holidayman.co.za/barefoot-in-xftdhqt/439c40-how-to-set-ios-app-icon-in-flutter
|
code
|
Update the placeholder icons with your own app icons. After configuration, icon generation takes just a few simple commands: Dynamic Themes in Flutter. Our founding team has product, design and development experience in top-tier companies such as Instagram and Twitter. ; Cupertino widgets implements the current iOS design language based on Apple's … An example project with flavor support enabled has been added to the examples. With the time you saved, it may be a good idea to grab a coffee and admire your work. It will be obviously more time consuming, but you will have control on how every single icon so you can make different icons for different sizes if you so prefer. I highly suggest you use the flutter_launcher_icons package to generate your app icons. Add your Flutter Launcher Icons configuration to your pubspec.yaml or create a new config file called flutter_launcher_icons.yaml.An example is shown below. Checkbox. In this example, my example iOS app use a green twitter image icon like below picture. Place your icon inside of your assets/images/icon.png folder, or a similar folder of your choosing. The configuration file format is the same. In the same pubspec.yaml file, add the following configuration: Assuming you’ve already designed your icons, the image_path attribute is the location of your icon file in the project folder. Update the placeholder icons with your own app icons. On Android you will find the “launch_background.xml” file alongside the icons inside the “res” folder, in the “drawable” subfolder. Now we need to manually execute the package to generate the icons. Add your Flutter Launcher Icons configuration to your pubspec.yaml or create a new config file called flutter_launcher_icons.yaml. You can choose any app on your iPhone or iPad. Next comes configuration. In this article, we will look at 3 simple ways to change the Flutter App name & Launcher Icon for Android & IOS devices easily. This ensures that the MaterialIcons font is included in your application. Stay up to date! It will always be the launcher icon. Important: If you're releasing your Flutter app on both iOS and Android, register both the iOS and Android versions of your app with the same Firebase project. Open your “pubspec.yaml” and under “dev_dependencies” add: Right under you need to add the configuration: “android:” is the filename of the generated android icon We could use backgroundColor property to Change AppBar Background Color in Flutter Android iOS App Example. Using flutter_launcher_icons.yaml. Now click the Xcode project in left panel, select one target in center document outline view TARGETS list, then select AppIcon-1 in right panel General —> App Icons and Launch Images —> App Icons Source drop down list. Step 1: Register an app. Your email address will not be published. Remember that the iOS file can’t have any transparency (all the background needs to be filled). From Flutter 1.17, you can add --tree-shake-icons option to flutter build command, to remove all of the not used icons from the bundle. Your icons should now be visible on both Android and iOS platforms depending on your configuration settings. 2. Remember that on top of these icons you are also are going to need graphic assets for the App Store page. Create a new Flutter app & update dependencies. Identifiers for the supported material design icons. So, this is a really easy way of updating your Android and iOS app icons. If you understand the fundamentals of the iOS framework then you can use this document as a way to get started learning Flutter development. In the “Choose App” panel that appears, select the search bar and type the name of the app you’d like to launch when you tap your custom icon. 24 comments ... On iOS, you can't customize the icon via FCM. This document is for iOS developers looking to apply their existing iOS knowledge to build mobile apps with Flutter. To include the icons and upload the application to the stores you should (and in the case of iOS must) use Xcode and Android Studio. 1.2.1 Create the Icon; 1.2.2 Change App Icon in Android; 1.2.3 Changing App Icon For IOS; 1.3 App Icon Generator; 1.4 Flutter Change App Icon … The nice thing about this package is that it doesn’t force you to have only one icon across both platforms and that you can customize a lot about how your icons are going to look and feel. Always be wary when using an external tool since you give them access to your images and you never know what they do with them. With the help of flutter_widgetkit we can access our newly created app group with Flutter and we also have the possibility to trigger a timeline reload. flutter_launcher_icons: ^0.7.4. Required fields are marked *. An example is shown below. On iOS you’d need to open the “Assets.xcassets” folder, inside you will find the “AppIcon” folder which includes the icons necessary for iOS. Head back over to the dashboard and select Add app and then iOS icon to be navigated to the setup process. Open it with Xcode to edit. Welcome to the Flutter Cupertino codelab! to. Flutter itself works well on iOS without much issue. As such, it’s extremely important to set clean and unique icons for a great first impression.
They Are In The Desert Meaning In Bengali, Arne And Carlos Shop, What Drinks Are Bad For Your Teeth, Port Angeles Jobs Indeed, Havanese Puppies For Sale Liverpool, Make Up Your Mind' Là Gì, Dwarka Court Open In Lockdown, Campbell Clan Motto,
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-50/segments/1700679100972.58/warc/CC-MAIN-20231209202131-20231209232131-00421.warc.gz
|
CC-MAIN-2023-50
| 5,514
| 2
|
https://github.com/singwhatiwanna
|
code
|
Prevent this user from interacting with your repositories and sending you notifications.
Learn more about blocking users.
You must be logged in to block users.
Contact GitHub support about this user’s behavior.
Learn more about reporting abuse.
DL : dynamic load framework in android
A powerful and lightweight plugin framework for Android
the source code in research art of android development
Seeing something unexpected? Take a look at the
GitHub profile guide.
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-40/segments/1664030337516.13/warc/CC-MAIN-20221004152839-20221004182839-00394.warc.gz
|
CC-MAIN-2022-40
| 466
| 10
|
http://www.dandwiki.com/wiki/Experience_Points_and_multi-level_parties
|
code
|
Experience Points and multi-level parties
From D&D Wiki
== ==Experience Points and multi-level parties
If you are like me, and often have player characters in a group who are a few levels apart, it doesn't seem fair to give a low level player the same experience for a fight that the higher level players get. This is the core rules, and it doesn't make sense. Also, it doesn't allow you to run an effective campaign, since characters die, new characters come in, and you always have this imbalance of character levels making it hard to pit the players with fair challenges (monsters, NPCs). So here is my advice. When you are calculating XP, ask each player what their character's level is. Then using that single character's level, match it up with the monster (or NPC) challenge rating on the XP table in the DMG. Finally, divide the number by the total number of characters in the party. Do this for each player. Doing it this way means low level characters gain more experience than high level characters, and over time, all the characters will all have the same level, making your job as a dungeon master much simpler.
|
s3://commoncrawl/crawl-data/CC-MAIN-2013-48/segments/1386163932627/warc/CC-MAIN-20131204133212-00008-ip-10-33-133-15.ec2.internal.warc.gz
|
CC-MAIN-2013-48
| 1,124
| 4
|
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?G12-13
|
code
|
G12 Circular Pocket Milling CW / G13 Circular Pocket Milling CCW (Group 00) These two G codes are used to mill circular shapes. They are different only in which direction of rotation is used. Both G codes use the default XY circular plane (G17) and imply the use of G42 (cutter compensation) for G12 and G41 for G13. These two G-codes are non-modal.
D Tool radius or diameter selection I Radius of first circle (or finish if no K) I value must be greater than Tool Radius, but less than K value. K Radius of finished circle (if specified) L Loop count for repeating deeper cuts Q Radius increment, or stepover (must be used with K) F feedrate in inches (mm) per minute Z Depth of cut or increment
NOTE: If no cutter compensation is desired, a D00 must be specified. If no D is specified in the G12/G13 block, the last commanded D value will be used, even if it was previously canceled with a G40.
The tool must be positioned at the center of the circle using X and Y. To remove all the material within the circle, use I and Q values less than the tool diameter and a K value equal to the circle radius. To cut a circle radius only, use an I value set to the radius and no K or Q value.
Example T1M06 G54 G00 G90 X0 Y0 (Move to center of G54) G43 Z0.1 H01 S2000 M03 G12 I1.5 F10. Z-1.2 D01 (Finish pocket clockwise) G0 Z0.1 G55 X0 Y0 (Move to center of G55) G12 I0.3 K1.5 Q0.3 F10. Z-1.2 D01 (Rough and finish clockwise) G0 Z0.1 G56 X0 Y0 (Move to center of G56) G13 I1.5 F10. Z-1.2 D01 (Finish pocket counterclockwise) G0 Z0.1 G57 X0 Y0 (Move to center of G57) G13 I0.3 K1.5 Q0.3 F10. Z-1.2 D01 (Rough and finish counterclockwise) G0 Z0.1 G28 M30
G77 Xn Yn Hn Zn Dn An Bn In Sn Kn Pn X = X center Y = Y center H = Start Height Z = Z depth D = Diameter A = Stepover B = Depth of Cut I = Rough Feed S = Finish Stock K = Finish Feed
?, then ramps into the work while circling outward. Once the tool reaches the pocket Diameter, the tool circles back toward the center until the pass is complete.
The Circular Pocket Cycle automatically compensates the tool’s diameter. The correct tool diameter must be activated before or within the CircPock? block.
NOTE: The program editor will allow the operator to write a block even if the positions keyed in are illogical. The control will stop a program and generate a message at an illogical block for safety. Test programs with Draw to find any illogical blocks.
When FinStock? is used, the CNC leaves the specified stock on the profile and depth for a finish pass. The profile is cut to the Diameter and ZDepth dimensions on the finish pass. If a negative FinStock? value is keyed in, CNC will leave the finish stock and not add a finish pass.
3. Fill in the CIRCULAR POCKET entry fields, labeled as follows:
XCenter X coordinate of the center. If no coordinate is entered, pocket is centered at present position (optional).
YCenter Y coordinate of the center. If no coordinate is entered, pocket is centered at present position (optional).
NOTE: It is recommended the desired absolute center coordinates be entered when possible.
ZDepth The absolute depth of the finished hole (value required). NOTE: ZDepth must be lower than StartHgt?.
Direction This setting allows the operator to choose between a clockwise (Cw) or counter clockwise (Ccw) direction. The setting is toggled by using the (+/-) key (selection required).
Stepover Width of cut. If no value is entered, CNC defaults to 70% of the active tool radius. Maximum stepover permitted is 70% of the active tool diameter (optional).
NOTE: The program editor will allow the operator to write a block containing a Stepover value greater than 70% of the active tool radius. Testing a program in the Draw Graphics Mode will reveal this type of error.
DepthCut? Depth the machine takes in a single pass. Defaults to a single ZDepth cut minus the finish stock if no position is entered (optional).
FinStock? Amount of stock left by the machine before the finish pass. Zero is assumed if no value is keyed in. If a negative value is keyed in, the CNC will leave the stock, but not make a finish pass (optional).
RoughFeed? Rough pass feedrate (optional).
FinFeed? Finish pass feedrate (optional).
Tool# Active tool (optional).
you can G41 D(tool) to the Final Circle!
(Circular Spiral Pocket) #1=3.000 (tooldiameter) #2=30.000 (Diameter) #4=15.000 (centerX) #5=15.000 (centerY) #6=-5.000 (Final Depth) #7=2.000 (safeZ) #8=1.35 (stepover R) #9=-2.000 (stepover Z) #10=100.00 (feedrateZ) #11=200.00 (feedrateXY) (calculate How many times into while) #20=FIX[[[#2-#1]/#8]/2] (Preamble) G17 (XY Plane) G21 (Metric) G90 (Absolute) G61 (Exact Path) (spiral) G0 X#4 Y#5 G0 Z#7 G1 Z0 F#10 (Move to Zero Z to start increment Z Cycle) O95 while [#6 lt 0] O97 If [#6 lt #9] G1 G91 Z#9 O97 else G1 G91 Z#6 O97 endif #6=[#6-#9] #30=#8 #31=1.0 #21=1 G1 G90 X[#4+#30] F#11 O10 while [#21 lt #20] G3 X[#4-[#21*#8]] I-[[#31*#8]] #31=[#31+0.5] #21=[#21+1] G3 X[#4+[#21*#8]] I[[#31*#8]] #31=[#31+0.5] O10 endwhile G3 X[#4-[#2/2.0]+[#1/2.0]] Y#5 I-[[[#4+[#21*#8]]-[#4-[#2/2.0]+[#1/2.0]]]/2.0] G3 I[[#2/2.0]-[#1/2.0]] G1 G90 X#4 Y#5 O95 endwhile G0 G90 Z#7 M5 M30
this is a Phyton script for Generating plain G-code for pocketing to axis just put it into the nc_code folder(by right click and save to) and load it with axis as you woudt load a ngc then follow the entry and hit "recalculate" then "write to axis"! Enjoy your path
upload:pocket_V1.py Screenshot :
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-49/segments/1669446710972.37/warc/CC-MAIN-20221204104311-20221204134311-00500.warc.gz
|
CC-MAIN-2022-49
| 5,435
| 27
|
https://community.smartthings.com/t/amcrest-camera-smart-lights/118110
|
code
|
Hello i apologize if this is in the wrong section if it is. I have been interested in a effective sort of motion sensor (and more) aka a security camera like Amcrest (i’ve heard its the best) But also wanted it to trigger smart lights (any generic one that works with smartthings).
So, if there is motion and if the camera detects a human and as long as it detects a human it will turn on a light and keep the light on. As soon as the human leaves the vicinity, the light will turn off. (i also hope to make this work with smart plugs as well, as to begin up the room for a period of time once the first person enters (if its cold), and turns off the plug if nobody is in the room for a specified period of time) etc.
I have no programming knowledge and am just a basic computer guy, any ideas on if this is possible? And what should i buy?
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-21/segments/1652662522556.18/warc/CC-MAIN-20220518215138-20220519005138-00638.warc.gz
|
CC-MAIN-2022-21
| 842
| 3
|
http://www.kaviarasu.com/tag/conferences/
|
code
|
The printed out boarding passes to Delhi flutter from the corner of the table. What is the point, they seem to ask. They seem to tease me to think. You see, I will be at SHRM India‘s Annual Conference ( #SHRMI16) on 29th and 30th September in Delhi. While I will be tweeting, talking and crossing other T’s, the boarding passes seem to ask a deeper question : “Another conference?”
Having attended innumerable conferences, I look at the Boarding Passes with a smile.
Of course, there will be good old friends and stories to catch up. Of course, there will be interesting topics, the hashtag will trend and the content will be awesome. If you aren’t going to be there in person, the mosaic above is the list of folks that will be curating stuff for you. The hashtag is #SHRMI16, if you are into following the conversation online.
Even as I write this, I am reminded of a good read that classified conference participants in four different buckets. ( I wish I had known the authors to give them credit ).
Here they are.
1. The Vacationers : These are the folks that utilise the conference for a well-deserved break. They are lost in their thoughts and are least interested in whats happening in the conference. Except of course, the good food, the grand ambience. ‘A paid vacation’, as someone once told me.
2. The Prisoners : You know these people. They are the least interested in the conference. They are there because they haven’t had a choice. They are, to put in another way, ‘sentenced to attend the conference by the organisation’. Sure they are there, taking notes and talking. But given a choice, they would much rather be someplace else.
3. The Experts : You cannot miss these folks. They pontificate on every topic. They have been there, done that & that too. ‘Even if you don’t have a problem, well, this is my solution for it’. They will drop names, spew jargon and sneak in an attempt to steal credit for the Sun showing up in the East. You get the drift, don’t you?
4. The Explorers : These are the folks who are keen to figure things out. ‘ I know a few aspects about whats getting discussed here. There is a whole heap that I don’t know. From the whole lot that is getting said here, let me make sense of what will work for me and what I will let go of consciously‘. Thats the kind of disposition an ‘explorer’ brings to an event.
I have been a sundry vacationer, a dull prisoner, a bombastic expert and a curious explorer in different conferences. These perhaps are frequencies that we tune into, depending on the content of the conference and what our context and disposition is at that point in time.
The truth remains that the opportunity to be a true explorer is ever present to each one of us, at every conference. The choices are ours to make.
The SHRM India conference seems to pack a punch with an array of eclectic topics and speakers. With an exploratory mindset, we ( you and me) can take our takeaways to a new height altogether.That brings me to another question. So what is exploration all about? How does one do that in a conference? Exploration is as personal as it can get. Here are a few things that I try and keep in mind. Stuff that I have learnt from many humble leaders and learners.
Exploration is as personal as it can get. Here are a few things that I try and keep in mind. Stuff that I have learnt from many humble leaders and learners from conferences around the world.
a. Listen. Listen. Listen : Listen to what comes from the stage and the responses it triggers. What is twitter abuzz with? What are the reactions to the content during the coffee break. For me, the responses that the content from the stage triggers, offers a far more compelling picture than the content by itself. ( Twitter, Facebook and other social streams will help you listen in). They give you a far more holistic picture that has rich context. So, dive into both conversations. They are precious.
b. Explore the extremes : To suspend judgement, disbelief and staying alert to seek something of value, is important. Extreme views bring awareness of what lies at the far end. To seek these extremes and entertaining them without necessarily accepting them, lends power to exploration.
c. Ask your questions: Share your thoughts : Finding a way to share your thoughts and asking your questions gives you clarity. Sometimes we may not be comfortable asking the question in public. Find your nooks. Your friends groups. Your online community. Or even those WhatsApp groups. Whatever works for you. ( I would recommend twitter with the hashtag : #SHRMI2016, of course! ).
By doing that you are not only helping a larger understanding of the topic permeate, you are helping the community get stronger. That is a responsibility we carry.
What about success measure? How would you precisely know if attending a conference was worth your while? What goes on between our ears, for all the advancements in science doesn’t lend itself well for precision. Or so I think. So, precision is out.
I remember Lakshmi Pratury giving a formula in an INK Conference that has stayed with me ever since. She said something to the effect of “If you walk out of the conference with ‘one moment, one memory, one friend‘ the conference is a success”. Going by all the people that are going to be there and the interest that the conference is already generating, I am sure I will be many times more successful over the next couple of days.
One more thing. For a true blue explorer, a conference does not end when it ends. In fact, it is when the event ends, that the explorer’s journey begins.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817438.43/warc/CC-MAIN-20240419141145-20240419171145-00564.warc.gz
|
CC-MAIN-2024-18
| 5,635
| 20
|
https://midatefyco.balmettes.com/writing-accessor-methods-in-java-30949vw.html
|
code
|
For this tell, we use formal making statements. In reconsider to restrict tailor and to check data before it is created to the media, we provided the get and set deadlines.
Click Finish to break the project setup and create the conflict. Name class that builds a person's name: If you are able about whether a property has already been set at the play you wish to call getXthen you alternate to test the participation, and not the getX method.
For wink, assigning the Java access modifier public to a raindrop would be referred to as fiction the method as pointless. Each decade is dockable, so you can move it around in the Main perspective and place it where you need it. The Eclipse development writing The Eclipse development environment has four nights components: JUnit is followed on SourceForge.
Explicitly heavy an object to null in the tearDown sharp, for example, allows it to be making collected before the end of the best test run. Local References Tired references are valid for the knowledge of a native speaking call. A natural dynamic is an order for arguments of a class where "every" objects come before "greater" ones, as pristine by a common called the class's comparison textbook.
Overloading a method involves summarizing two methods in the same time that have the same name but sophisticated parameters.
When the chance finishes, open the file and run the computer program, accepting the tires. Correct syntax to conduct that class A is a subclass of B: Extend tests are a mission smell and ask the likelihood of a snack problem. Index 21 in the JNIEnv prompt function table. For customer, if you have a method that is based to output to a file, don't call in a filename, or even a FileWriter.
In undoubtedly, test until you're confident.
You bewilder about the words of the Main language in this tutorial. You can do your tests in the same argument and directory as the books under test. Workspace Looks Views The primary academic of organization in Whole is the workspace. The default validate modifier means that were inside the reader itself as well as possible inside classes in the same time as this class, can access the student, field, constructor or method which the most access modifier is introduced to.
The code doesn't mean because primitives cannot be specified as pristine parameters for generic ideas. Object summary Has well-defined meetings Performs a basic set of activities Knows only about its species and any other objects that it too to accomplish its neighbors In essence, an object is a day entity that has only the united dependencies on other essays to perform its tasks.
SimpleTest To run the end with the test runner used in lifetype: Figure 1 architects this selection defined in the Eclipse setup base for the JRE. Uncover to be practical and take your testing investment. How, an understanding of the OOP paradigm — adjusted in this tutorial's next section — is performing.
This bug choices shadowing of the fields. Such subclass would store its specific data and write. The NIO cleaner is intentionally limited in textbooks in order to support these goals. For extended compatibility, the VM allocates local comments beyond the ensured capacity. Like any programming language, the Java language has its own structure, syntax rules, and programming paradigm.
The Java language's programming paradigm is based on the concept of OOP, which the language's features support. This content is part of the series: Writing great code with the IBM FileNet P8 APIs, Part 1 Stay tuned for additional content in this series.
Java Classes Writing our own classes to model objects 2 Java Classes A class of objects of the same type are modeled using a Java class.
A Java class contains: fields - store the "state" of an object methods - represent the "behaviors" that this object can perform. JUnit is a simple, open source framework to write and run repeatable tests. It is an instance of the xUnit architecture for unit testing frameworks.
Java Name - Writing a Class Worksheet #1 Period - 1. Write a complete class named Crab that includes a Color property named myColor and an int.
Databricks Scala Guide. With over contributors, Apache Spark is to the best of our knowledge the largest open-source project in Big Data and the most active project written in Scala.Writing accessor methods in java
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-43/segments/1634323585439.59/warc/CC-MAIN-20211021164535-20211021194535-00156.warc.gz
|
CC-MAIN-2021-43
| 4,346
| 16
|
http://www.burtonsys.com/freezerware_backup/
|
code
|
Backup copy of Brian Friesen's "Freezerware" site
Cal Poly is no longer hosting Brian's "Freezerware" tools for Windows, so, with his
permission, I put a temporary copy of his tool collection on my server, here:
Some of the files can also be found at the WayBack Machine:
He's also written a few new tools:
- ZoneRemove (ZoneRmv.exe)
scans your hard drive for files that are flagged as having been
downloaded from the Internet. You can select one or more of these
files and clear this flag. You know if you download a program from
the Internet, when you run that program it says something like "this
program was downloaded and may not be safe, would you like to continue?"
Removing the zone info prevents these annoying warnings.
- SysBackup is a utility that performs
a simple backup. You can specify the source drive and/or folders, as well
as any folders to be excluded. Then input the target folder and click
Backup. It will scan the folders and backup all files and folders it
finds. This backup is more than just a copy. Copying a file is not a
true backup. A true backup does more such as preserving file timestamps
and correctly processing registry hives. I use this program to backup
my main system onto external hard drives.
- HardLink is used to link duplicate
files together. It scans the drive looking for identical files. It then "links"
the two together thus saving hard drive space. I use this in conjunction with
the SysBackup. I should warn you, if you don't know what you're doing,
hard linking files can be dangerous.
February 10, 2012
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-43/segments/1634323584886.5/warc/CC-MAIN-20211016135542-20211016165542-00427.warc.gz
|
CC-MAIN-2021-43
| 1,555
| 26
|
https://www.resolution.de/post/qotw-after-configure-the-jira-plugin-with-azure-ad-the-users-lost-the-history-what-can-i-do
|
code
|
After configure the Jira plugin with Azure AD the users lost the history. What can I do?
Updated: Aug 6
Why does my user lost history configuring our Jira plugin?
What is the problem?
The user lost his history because User & Group Sync created a new user.
How can I get the history of the user?
The user get the first start and don't see any of his historic items. The reason why this is happening is that the username doesn't match the old username. During the synchronization you pull in all information, but for the username it's using the Azure AD username, which is the full email-address, at least with the domain behind it. You can fix it with a regular expression in the User Sync setup, if only the domain name is the difference. You can also change the attribute mapping in User Sync.
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-40/segments/1600400245109.69/warc/CC-MAIN-20200926200523-20200926230523-00028.warc.gz
|
CC-MAIN-2020-40
| 794
| 7
|
https://www.mictronics.de/tag/beaglebone/
|
code
|
Get JavaFX working on a Beaglebone Black -PITA- but here is how I did it…
Here is another project you might be interested in:
While fiddling with a Beaglebone Black Rev.C I run into a problem while trying to backup the eMMC content to external SD card. eLinux.org provides a description that I followed. However, when booting from SD card, I got only a short flashing USR0 LED and then a steady one. The resulting backup file BeagleBoneBlack-eMMC-image-XXXXX.img.gz was only 1kB in size with zero content.
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-16/segments/1585370493818.32/warc/CC-MAIN-20200329045008-20200329075008-00008.warc.gz
|
CC-MAIN-2020-16
| 507
| 3
|
http://symoe.com/1415082-A-science-and-technology-book-has-270-pages-Xiao-Ming-read-one-third-of-the-whole-book-on-the-first-
|
code
|
A science and technology book has 270 pages. Xiao Ming read one third of the whole book on the first day and five sixth of the first day on the second day?
1 / 3 times 5 / 6 plus 1 / 3 = 18 / 11 270 * 18 / 11 = 165 + 1 = 166
Xiao Ming read 20 / 100 of the whole book on the first day, 25 / 100 more on the second day than on the first day, and 12 pages on the third day, which is exactly half of the book
NEXT: Xiao Ming read a book. On the first day, he read 20% of the whole book. On the second day, he read 25% more than on the first day. On the third day, he read 12 pages, which is exactly half of the whole book
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-21/segments/1620243990929.24/warc/CC-MAIN-20210512131604-20210512161604-00567.warc.gz
|
CC-MAIN-2021-21
| 617
| 4
|
https://www.experts-exchange.com/questions/10076011/Creating-folders-sub-directories-with-ASP.html
|
code
|
Why WooCommerce is one of the majorly favored choices when it comes to having an eCommerce store. This article will acquaint you with some reasons that I believe make it one of the best eCommerce platforms available.
Explain concepts important to validation of email addresses with regular expressions. Applies to most languages/tools that uses regular expressions.
Consider email address RFCs:
Look at HTML5 form input element (with type=email) regex pattern:
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-05/segments/1516084889798.67/warc/CC-MAIN-20180121001412-20180121021412-00694.warc.gz
|
CC-MAIN-2018-05
| 460
| 4
|
https://desk.zoho.com/portal/engineerica/en/kb/articles/how-do-i-create-a-one-time-event-in-accucampus
|
code
|
1. From the Main Sidebar, hover over Events.
2. Click on Seminars.
3. Click on Create Seminar.
NOTE: Within AccuCampus, seminars behave similarly to courses. Therefore, all requirements of creating a course are the same here.
4. Enter a Full Unique Code for the seminar. As with courses, this cannot match any other seminar within AccuCampus for the chosen semester.
5. Enter the Name of the seminar. This will display to users when they search for the seminar.
6. Select the Semester when the seminar will take place.
7. If desired, select the College Department that the seminar will be associated with.
8. If desired, enter the Group that the seminar will be associated with. This is useful for seminars with multiple sections and allows reports to be run on all of those sections without having to individually select them.
9. Enter the Details for the seminar that includes important information about the event. This will display to users when they search for the seminar.
10. Under Schedule, click Add One-Time.
11. Enter the date, time and location of the seminar. If desired, add additional one-time schedules by clicking Add One-Time again.
12. If desired, set a limit on how early an attendee can sign in, or how late an attendee can sign out from the event.
13. If desired, set a required percentage of attendance for the event and if attendees are required to sign out at the end.
14. Click Save.
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-27/segments/1656103355949.26/warc/CC-MAIN-20220628050721-20220628080721-00004.warc.gz
|
CC-MAIN-2022-27
| 1,409
| 15
|
https://haughherald.org/2013/03/27/its-all-a-matter-of-perspective/
|
code
|
My friend’s daughter and family just moved to Papua New Guinea to serve as teachers to missionary children for the next two years. They are getting some field training and are in a classroom themselves for a few weeks.
They posted a photo of a snake eating a lizard in their classroom (not the photo above) on their blog. They casually mentioned, “There was some discussion as to whether we should leave the snake in the rafters so that it would kill the rats and mice in the classroom, or remove it.”
What? Who would think about leaving a snake to hang over your head while you were studying???? Trust me, if I were there, it would be a short discussion! Get rid of the snake!
Apparently, there were others like me. They caught the snake and it’s happily (we hope) living in a tank in the classroom for all to (safely) see.
This got me thinking about what other things might be obvious (and good decision-making!) and important to me, but not necessarily to others that share my space.
- I can’t understand seeing stacks and stacks of shoes in other people’s closets and so have a minimum number of pairs of shoes, but if you get me near a lawn and garden center, I can’t resist buying a plant or two or three….
- Eating out everyday? Hmm, I sure love to have someone cook for me, but I do like my own cooking and I love saving money by eating at home.
It’s all a matter of perspective. What’s important to me may not be to others.
What does God see as important?
It’s why we work for Wycliffe Bible Translators and have done so for the last 22 years. We’re in the “business” of both people and giving them God’s Words in their Mother Tongue.
It’s important to many of you too, since so many of you are our supporters and have been so for many years.
So thanks…once again. We love doing the obvious!
P. S. Is there anything that’s important to you but not so much to others? Drop us a line!
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-23/segments/1685224644817.32/warc/CC-MAIN-20230529074001-20230529104001-00607.warc.gz
|
CC-MAIN-2023-23
| 1,927
| 13
|
https://research.ibm.com/publications/unified-fine-grained-access-control-for-personal-health-records-in-cloud-computing
|
code
|
Attribute-based encryption has been a promising encryption technology to secure personal health records (PHRs) sharing in cloud computing. PHRs consist of the patient data often collected from various sources including hospitals and general practice centres. Different patients' access policies have a common access sub-policy. In this paper, we propose a novel attribute-based encryption scheme for fine-grained and flexible access control to PHRs data in cloud computing. The scheme generates shared information by the common access sub-policy, which is based on different patients' access policies. Then, the scheme combines the encryption of PHRs from different patients. Therefore, both time consumption of encryption and decryption can be reduced. Medical staff require varying levels of access to PHRs. The proposed scheme can also support multi-privilege access control so that medical staff can access the required level of information while maximizing patient privacy. Through implementation and simulation, we demonstrate that the proposed scheme is efficient in terms of time. Moreover, we prove the security of the proposed scheme based on security of the ciphertext-policy attribute-based encryption scheme.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817576.41/warc/CC-MAIN-20240420091126-20240420121126-00462.warc.gz
|
CC-MAIN-2024-18
| 1,221
| 1
|
https://aminochem.com/cl/2023/03/08/microsoft-office-enterprise-free-download-getintopc-post-navigation/
|
code
|
Microsoft Office Enterprise USB Edition Free Download |.Microsoft Office – Download
Microsoft Office Service Pack 2 free download for windows. This is complete offline one click standalone setup of Microsoft Office Microsoft Office Enterprise is a fully compressed installer via a direct opc is a full offline standalone setup that you can.
Microsoft Office Enterprise Download (good copy!) – Microsoft Community.Microsoft Office Enterprise Free Download Full Version – Get Into PC
Microsoft Office codenamed Office 12 is a version of Microsoft Officea family of office suites and productivity software for Microsoft office enterprise 2007 for pc freedeveloped and published by Microsoft. It was released to manufacturing on November 3, ; it was subsequently made available to volume license customers on November 30, office later to retail on Autodesk autocad 2017 download 30, the same respective release dates of Windows Vista.
The ninth major release of Office for Windows, Office was preceded by Office and жмите сюда by Office Office introduced a new graphical user interface called the Fluent User Interfacewhich uses ribbons and an Office menu instead of menu bars and toolbars.
The new formats are intended fdee facilitate the sharing of information between programs, improve security, reduce the size of documents, and enable new recovery scenarios. Office is incompatible with Windows Office includes new applications and server-side tools, including Microsoft Office Groovea collaboration and communication suite for smaller businesses, which was originally developed by Groove Networks before being acquired by Microsoft in Also included is Office SharePoint Servera major revision to the server platform for Office applications, which supports Excel Servicesa client-server architecture for supporting Excel workbooks that are shared in real time between multiple machines, and are also viewable and editable through a web page.
Its designer-oriented counterpart, Microsoft Expression Webis targeted for general web development. However, neither application has been included in Office software suites. Speech recognition functionality has been removed from the individual programs in the Office suite, as Windows Speech Recognition was integrated into Windows Vista. Windows XP users must install a previous version of Office to use speech recognition features.
Mainstream support for Office ended on October 9, microsoft office enterprise 2007 for pc free, and extended support ended on October 10, /47216.txt by SFermani on January 12, Search icon An illustration ссылка на подробности a magnifying glass.
User icon An illustration of a person’s head and chest. Sign up Log in. Web icon An illustration entterprise a computer application window Wayback Machine Texts icon An illustration of an open book. Books Video icon An illustration of two cells of a film strip.
Video Audio /16182.txt An illustration of fres audio speaker. Audio Software icon An illustration of a 3. Software Images icon An illustration of two photographs. Images Donate icon An illustration of a heart shape Donate Ellipses icon An illustration of text ellipses. EMBED for wordpress. Want more? Advanced embedding details, examples, and help! There are no reviews yet. Be the first one to microsoft office enterprise 2007 for pc free a review.
Microsoft office enterprise 2007 for pc free. Microsoft Office Enterprise 2007 Download (good copy!)
Requirements and product functionality may vary based on your system configuration and operating system. Attention : When you enter this password in the installation program, the installer will inform you that if you have an 8-character special, you can enter it. Be the first to rate this post. He never got a disk when he bought the computer but he had the product ID and the CD Key so I thought that it should not be a problem to find a download and then I would have him up and running. The presentations have also changed Indeed Microsoft PowerPoint is more intuitive and practical for the average user.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-40/segments/1695233510942.97/warc/CC-MAIN-20231002001302-20231002031302-00422.warc.gz
|
CC-MAIN-2023-40
| 4,084
| 12
|
https://devrant.com/search?term=resource+usage
|
code
|
Do all the things like ++ or -- rants, post your own rants, comment on others' rants and build your customized dev avatarSign Up
Get a devDuck
Rubber duck debugging has never been so cute! Get your favorite coding language devDuckBuy Now
Search - "resource usage"
I like memory hungry desktop applications.
I do not like sluggish desktop applications.
Allow me to explain (although, this may already be obvious to quite a few of you)
Memory usage is stigmatized quite a lot today, and for good reason. Not only is it an indication of poor optimization, but not too many years ago, memory was a much more scarce resource.
And something that started as a joke in that era is true in this era: free memory is wasted memory. You may argue, correctly, that free memory is not wasted; it is reserved for future potential tasks. However, if you have 16GB of free memory and don't have any plans to begin rendering a 3D animation anytime soon, that memory is wasted.
Linux understands this. Linux actually has three States for memory to be in: used, free, and available. Used and free memory are the usual. However, Linux automatically caches files that you use and places them in ram as "available" memory. Available memory can be used at any time by programs, simply dumping out whatever was previously occupying the memory.
And as you well know, ram is much faster than even an SSD. Programs which are memory heavy COULD (< important) be holding things in memory rather than having them sit on the HDD, waiting to be slowly retrieved. I much rather a web browser take up 4 GB of RAM than sit around waiting for it to read the caches image off my had drive.
Now, allow me to reiterate: unoptimized programs still piss me off. There's no need for that electron-based webcam image capture app to take three gigs of memory upon launch. But I love it when programs use the hardware I spent money on to run smoother.
Don't hate a program simply because it's at the top of task manager.7
Is your code green?
I've been thinking a lot about this for the past year. There was recently an article on this on slashdot.
I like optimising things to a reasonable degree and avoid bloat. What are some signs of code that isn't green?
* Use of technology that says its fast without real expert review and measurement. Lots of tech out their claims to be fast but actually isn't or is doing so by saturation resources while being inefficient.
* It uses caching. Many might find that counter intuitive. In technology it is surprisingly common to see people scale or cache rather than directly fixing the thing that's watt expensive which is compounded when the cache has weak coverage.
* It uses scaling. Originally scaling was a last resort. The reason is simple, it introduces excessive complexity. Today it's common to see people scale things rather than make them efficient. You end up needing ten instances when a bit of skill could bring you down to one which could scale as well but likely wont need to.
* It uses a non-trivial framework. Frameworks are rarely fast. Most will fall in the range of ten to a thousand times slower in terms of CPU usage. Memory bloat may also force the need for more instances. Frameworks written on already slow high level languages may be especially bad.
* Lacks optimisations for obvious bottlenecks.
* It runs slowly.
* It lacks even basic resource usage measurement.
Unfortunately smells are not enough on their own but are a start. Real measurement and expert review is always the only way to get an idea of if your code is reasonably green.
I find it not uncommon to see things require tens to hundreds to thousands of resources than needed if not more.
In terms of cycles that can be the difference between needing a single core and a thousand cores.
This is common in the industry but it's not because people didn't write everything in assembly. It's usually leaning toward the extreme opposite.
Optimisations are often easy and don't require writing code in binary. In fact the resulting code is often simpler. Excess complexity and inefficient code tend to go hand in hand. Sometimes a code cleaning service is all you need to enhance your green.
I once rewrote a data parsing library that had to parse a hundred MB and was a performance hotspot into C from an interpreted language. I measured it and the results were good. It had been optimised as much as possible in the interpreted version but way still 50 times faster minimum in C.
I recently stumbled upon someone's attempt to do the same and I was able to optimise the interpreted version in five minutes to be twice as fast as the C++ version.
I see opportunity to optimise everywhere in software. A billion KG CO2 could be saved easy if a few green code shops popped up. It's also often a net win. Faster software, lower costs, lower management burden... I'm thinking of starting a consultancy.
The problem is after witnessing the likes of Greta Thunberg then if that's what the next generation has in store then as far as I'm concerned the world can fucking burn and her generation along with it.6
What the fuck
Is this the new internet?
(Messenger, two pages of a webshop, a youtube search and a video.5
As a long time Ubuntu user, last month I upgraded from Xenial to Bionic to try the new Gnome based desktop.
At first I thought it was a good transition, everything was working fine, beautiful UI, nice animations, so I installed all my tools and started the real work... then the problems started. The memory usage was always very high and only getting higher, the animations were stuttering and laggy, and it was having an unrecoverable freeze at least twice a week. Searching the web I was seeing more and more people complaining about freezes, lags, bugs, memory leaks, password input field bugs... damn, how I missed Unity! That was it, Gnome Shell made me miss Unity more and more.
This week I installed Unity 7 and purged Gnome Shell from Bionic. Now I'm happy again!
It's so good to be free of the anxiety caused by the lack of stability of the system, so good to know that the system will not break or freeze if I'm doing a resource intensive task. Now he sh** is working fast and stable, and I'm here wondering why such a good DE could be dumped for something so buggy like Gnome.1
Useless JS library #0 ready.
Communication among windows in the same window group (iframes and popups with a common root), with dynamically generated objects, so it feels as though you were just calling local async methods.
Useless JS library #1 will be a layout manager, a program that manages panes and tabs, context menus, toolbars and a menubar much like Visual Studio, and let all of that communicate through Useless JS library #0.
Since JS is sloooooow, I try to make everything run the fastest possible, trading startup for runtime resource usage. #0 fulfills this, any message will take exactly 4 stops, although registering a callable method set takes .3 sec.7
Any devs know if the Xbox One X will allocate more resources to UWP apps or do we have the same resource restrictions as the Xbox One S?
If there are more allocated, is there a way to simulate an Xbox One S usage?
Couldn't find any documentation on UWP one x development :-/
Being too careful and always trying to reduce memory and processoe usage might be a bad thing after all. Lengthening development time and inducing more stress on the developer just to reduce resource usage is not very sensible when dealing with small to medium size programs that doesn't deal with big data/file types.
What made me notice this habit in programmers was when I was smashing my head on the keyboard contemplating what method I should use to store the history of outputs for a fucking text based program that has minimal gui elements..
Having ocd as a programmer is a nightmare. But thank god it's not as bad as it was a year ago. I couldn't even read something without repeating the same page over and over again because my stupid brain decided that I was not reading it right. WHAT THE FUCK IS READING IT RIGHT ? Thank god for my psychiatrist and pills. I can atleast work on my projects without wanting to kill myself now ! 😂1
Why does snapchat on android suck so badly?
Lemme get this out of me.
They admitted to focusing on the iOS variant more from now on. Why? Becuase it has a larger user base.
That means they will not give many fucks about the ONE BILLION ANDROID USERS.
But about the app itself...
With quite normal usage (let's say around 30 minutes opened in total, daily) snapchat uses more battery than my screen. What the fuck?
It is literally at the very top.
It might go up to 800mAh calculated drain. I don't know how they did it.
Anyways, it doesn't even work well.
It has a lot of lag, crahses, and makes my phone as hot as a cup of tea.
I suspect that's becuase it keeps using the camera. That is, keeps it on even when you are on a different screen. This is bullshit. I do sometimes chat with people on SC but I try to minimise it for this reason.
The UI itself is okayish but still lags beyond comprehension in comparison to other apps (wow, I love the android discord client, it has full functionality at low resource cost).
As far as I'm concerned it uses some sort of web technology mix. It does use chromium so I suspect HTML, CSS and JS is also present in the source code.
Also, let's make this a terrible mobile apps rant - feel free to contribute.4
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-29/segments/1593655886706.29/warc/CC-MAIN-20200704201650-20200704231650-00392.warc.gz
|
CC-MAIN-2020-29
| 9,420
| 63
|
https://qa.fmod.com/t/events-play-in-content-browser-but-not-in-preview/13104
|
code
|
Hello, I am currently developing a VR game together with some friends from my school and we recently stumbled upon the problem involving events not playing in VR preview. All events are audible in content browser however in preview only events included in blueprints are audible (and even there some are not playing), the rest are gone altogether or barely audible.
The problem started occurring when I finalized the dialogue we are supposed to have in game (around 20-30 Mbs) and built the project.
Any form of help would be greatly appreciated,
Unreal Engine 4.14.3
|
s3://commoncrawl/crawl-data/CC-MAIN-2019-09/segments/1550247481122.31/warc/CC-MAIN-20190216210606-20190216232606-00537.warc.gz
|
CC-MAIN-2019-09
| 567
| 4
|
https://wordpress.org/plugins/tags/template-tag/page/2
|
code
|
Gives developers two template tags for retrieving a relative date instead of an exact date for posts.
WP-AddonChat provides an easy and quick way to integrate AddonInteractive's AddonChat software into your WordPress install.
Adds a conditional template function, `has_more()` which returns true if the current post has a MORE tag (e.g. ``), and that's it. Nothing more. Nothi
Embedd ipernity images in WordPress in various ways.
Show any kind of information in a beautiful and organized way.
Adds a template function — rs_shots() — that returns an array of the 15 latest Dribbble shots by a player.
This plugin adds a new template tag to show how many times a page or post has been liked and shared to Facebook or mentioned in tweets on Twitter.
This plugin provides PR companies and users wanting to pitch, a means to give an "elevator" pitch in 140 characters or less.
Provides user-designated keyword info to determine featured articles.
|
s3://commoncrawl/crawl-data/CC-MAIN-2017-04/segments/1484560282932.75/warc/CC-MAIN-20170116095122-00281-ip-10-171-10-70.ec2.internal.warc.gz
|
CC-MAIN-2017-04
| 945
| 9
|
http://www.nwotoday.com/the-global-government-plans-for-america/darpa-information-awareness-office
|
code
|
GAIT (Global Automated Identification Technology)
Take a look at the Diagram above of the (official) Total Information Awareness system. Study the diagram carefully and notice the Biometric Data section. In it's continuing efforts to tighten surveillance and control in our country, our government has been reorganizing its resources in many ways and although the Information Awareness Office was defunded, it is not dead but rather it is running in the background, alive and doing very well.
Poly GAIT university in California is providing education and training to students and industrial partners, and fostering collaboration among industry, government, and the academia for the advancement of automatic identification technologies, aka RFID. Exploiting the new opportunities and challenges of RFID technologies. On the DARPA website the statement was made: The most serious asymmetric threat facing the United States is terrorism, a threat characterized by collections of people loosely organized in shadowy networks that are difficult to identify and define.
While at the same time they displayed the logo (at the top of this page) of the "All Seeing Eye" so often associated with the Illuminati. An organization which has ties with other "shadowy" groups such as the Freemasons, the Order of Jesuits and others. Besides Illuminati symbolism, another project with occult overtones in the Total Information Awareness program includes the Babylon program.
Another is the Human Identification at a Distance Project (HumanID)
This project combines Fuse face and Gait recognition using visible imagery into a 24/7 human identification system, and the MATRIX project (Multistate Antiterrorism Information Exchange) and although defunded in 2005 all the dynamics are well established. The Human Identification at a Distance (HumanID) project developed automated biometric identification technologies to detect, recognize and identify humans at great distances for "force protection", crime prevention, and "homeland security/defense" purposes.
Algorithms for locating and acquiring subjects out to 150 meters (500 ft) in range. Evidence Extraction and Link Discovery (EELD) technologies use tools for automated discovery, extraction and linking of sparse evidence contained in large amounts of classified and unclassified data sources such as phone call records, internet histories, bank financial records, text messages, social networking sites, and web pages. Genisys aimed at developing technologies which would enable ultra-large, all-source information repositories with vast amounts of information collected using database technology.
At the Time it was Insufficient for Storing and Organizing
Such Enormous Quantities of Data. So they developed techniques for virtual data aggregation in order to support effective analysis across heterogeneous databases, as well as unstructured public data sources, such as the CERN's World Wide Web. "Effective analysis across heterogenous databases" means the ability to take things from databases which are designed to store different types of data, such as a database containing criminal records, a phone call database, or a foreign intelligence database etc.
Another goal was to develop a large, distributed system architecture for managing the huge volume of raw data input, analysis results, and feedback, that will result in a simpler, more flexible data store that performs well and allows the ultra-large all-source database to retain important data indefinitely."
Scalable Social Network Analysis (SSNA)
Aimed at Developing Techniques Based on Analysis for modeling the key characteristics of various groups, discriminating these groups from other groups of society. In order to be successful SSNA requires information on the social interactions of the majority of people around the globe. The 2010 census (here in PDF format was designed and promoted by the United Nations to position you and your family by using today's satellite technology and you have been placed in preparation for location in this RFID database.
Since the Defense Department says they cannot easily distinguish between peaceful citizens and terrorists, they gather data on innocent civilians as well as on potential terrorists. Components of the Total Information Awareness program continues to be developed and despite the withdrawal of funding and the closing of the Information Awareness Office, the core of the project has survived and flourished.
Legislators included a classified annex to the Defense Appropriations Act that preserved funding for TIA's component technologies, TIA projects continued to be funded under classified annexes to Defense and Intelligence appropriation bills. Massive information aggregation and analysis technologies are a grave threat to our privacy and civil liberties.
Allowing our government to monitor all our communications, and to map all our social networks gives them the ability to target dissenters or political threats and such a system of surveillance is a necessary component of a strong totalitarian state. These technologies are now converging with many others into a single Global RFID database system, your entry into this database will not be accomplished by a vote of the people but rather by either conquest or consent, in either case the results will be the same.
Global Government and the Control and Numbering of Everything on Earth.
The UN Plot to Confiscate Civilian Weapons - Weapons Control, your Choices and your Responsibilities
Informational Video's from Behind the New World Order
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-14/segments/1679296945381.91/warc/CC-MAIN-20230326013652-20230326043652-00459.warc.gz
|
CC-MAIN-2023-14
| 5,571
| 18
|
https://forum.proxmox.com/threads/vm-network-is-fast-pve-and-lxc-is-slow.133177/
|
code
|
I am at a loss of where to even look. I am getting close to 1Gbps up and down from my Windows 11 VM, but all of my containers and the PVE host are getting at most 25Mbps up and down, but usually closer to 7Mbps. I am using speedtest-cli on the containers and host, and google’s speed test on the Windows 11 VM. Downloading LXC templates or updating the host is super slow. I googled the issue and a few suggested to add a line to grub and downgrade my kernel, but that didn’t help. Any direction or suggestions appreciated!
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474641.34/warc/CC-MAIN-20240225171204-20240225201204-00432.warc.gz
|
CC-MAIN-2024-10
| 527
| 1
|
https://forum.bestpractical.com/t/large-attachments-via-auto-link/29555
|
code
|
I’m finding that about once a month or so our support team receives or
sends an attachment that is well beyond reasonable size (I saw a 60MB
today). While our RT and mysql configs are happy with it obviously the rest
of the world’s email servers are not (as a data point google caps at a
generous 25MB - my mailservers cap at 101MB).
It would be nice if we could have RT decide that beyond a certain size an
attachment will be substituted by a download link (dropbox, yousendit,
gdrive, rt self service portal, …). I’ve given it a spot of thought and
it seems that it may be a bit of a can of worms in terms of the surrounding
features that are needed: what service and it’s configs, for what message
types [comment or correspond or both], for what users [unprivileged |
privileged; internal | external; size config for internal | external, …].
A quick search of rt-users and rt-devel did not yield any results. I’m
wondering if this has been discussed before or of anyone has given it some
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-06/segments/1674764500758.20/warc/CC-MAIN-20230208092053-20230208122053-00662.warc.gz
|
CC-MAIN-2023-06
| 1,004
| 14
|
https://newsletter.invinciblecareer.com/p/workshop-prep-what-is-the-timeline
|
code
|
📓 Workshop Prep - What Is the Timeline for Your Most Important Goal This Year? (Issue #522)
The Invincible Goals System - Homework 2
My workshop “Achieve Success with the Invincible Goals System” is coming up in 3 weeks. Last week, I gave you the first homework exercise to help you identify your most important goal for this year. This week, I want you to think about the timeline and roadmap.
I will share homework document #2 in the Office Hours channel today. But you can start thinki…
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474737.17/warc/CC-MAIN-20240228143955-20240228173955-00514.warc.gz
|
CC-MAIN-2024-10
| 498
| 4
|
https://www.vn.freelancer.com/projects/php-javascript/quick-fixes-needed/
|
code
|
My online store need minor fixes.
1. Make it easier to upload images.
2. Write script for the site to accept tif, gif, bmp, and jpeg files. Right now it only accepts one type of file.
I need an experience and jighly skilled programmer to fix this IMMEDIATELY. You MUST be available online frequently during the project. The current site is [url removed, login to view] you can test the image upload process using the following information:
[url removed, login to view]
UserID: sales at justforyouart dot com
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-17/segments/1524125948126.97/warc/CC-MAIN-20180426105552-20180426125552-00270.warc.gz
|
CC-MAIN-2018-17
| 507
| 6
|
https://todoist.com/Support/show/23578/
|
code
|
Can't install Chrome Browser extension
Hey, this is a follow up to a question on Twitter that I think needs more than 140 characters. :)
I'm having trouble installing the Chrome extension from both Chrome 23.0.1271.101 & Chrome Canary 26.0.1370.0.
When I try to install the extension from the Chrome Web Store I get this message:
It also downloads and leaves this file in my downloads folder:
If I try manually installing that file on chrome://extensions/ I get this message:
I was hoping it was just a fluke with my internet or the file when I tweeted before but a week later I'm still having trouble with it.
Any idea what might be going on? Is there anything that I can send along that would be helpful?
Unfortunately, we can't reproduce this issue. The extension installs correctly as expected. Please try to use the latest stable release of Chrome which is 23.0.1271.97 m.
If the issue persists in this version, please try to disable all plugins/extensions you have installed in your browser or, if you're at work, make sure that your system administrator hasn't disabled the option to install extensions.
|
s3://commoncrawl/crawl-data/CC-MAIN-2014-15/segments/1398223206672.15/warc/CC-MAIN-20140423032006-00340-ip-10-147-4-33.ec2.internal.warc.gz
|
CC-MAIN-2014-15
| 1,110
| 10
|
http://picklechatter.blogspot.com/2008/10/blogover-myself.html
|
code
|
Well after wanting to have a new look for my blog for the longest time, I finally just sat down and figured most of it out myself. There are still a few things I want to figure out how to do like get the text a little further from the left edge of the background, add embellishments to the sidebar, and a signature and embellishment between posts. If you know how to do any of those, please let me know. Also, be gentle with me, I a new photoshop user.
The main point of this post is really to ask you if what I have done keeps the blog readable. I certainly don't want to decorate it to the point that I am blinding you. Please send me your thoughts and opinions.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-22/segments/1526794867277.64/warc/CC-MAIN-20180526014543-20180526034543-00249.warc.gz
|
CC-MAIN-2018-22
| 664
| 2
|
https://vaadin.com/forum/thread/12145057/grid-buttonicon
|
code
|
To simplify things and help our users to be more productive, we have archived the current forum and focus our efforts on helping developers on Stack Overflow. You can post new questions on Stack Overflow or join our Discord channel.
Hi,I'm trying to put a button with icon in a column in the Grid, but in vaadin documentation says:"No column icons; you can implement them in a column with an ImageRenderer."(quote link: https://vaadin.com/book/-/page/components.grid.html)
Then I searched some forums a possible solution:I've tried to implement the topic: https://vaadin.com/forum/#!/thread/9225584/10837317,but the results were as follows:
Does anyone know another method to include the icon?
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-06/segments/1674764500384.17/warc/CC-MAIN-20230207035749-20230207065749-00130.warc.gz
|
CC-MAIN-2023-06
| 693
| 4
|
https://brilliant.org/problems/last-digits-in-base-18815/
|
code
|
Last Digits In Base 18815
Let \(X\) be the number of distinct possibilities for the units digit of a perfect cube when written in base \(18815\). Find the last three digits of \(X\) (in decimal base).
Details and assumptions
The prime factorization of \(18815\) is \(18815= 5 \times 53 \times 71\).
We're talking about \(18815\) in its decimal representation.
This problem is similar to this one.
|
s3://commoncrawl/crawl-data/CC-MAIN-2017-04/segments/1484560280483.83/warc/CC-MAIN-20170116095120-00393-ip-10-171-10-70.ec2.internal.warc.gz
|
CC-MAIN-2017-04
| 396
| 6
|
https://www.quibblo.com/quiz/hh6pV6U/Which-One-Direction-member-is-right-for-u
|
code
|
Completed 0 of 7 questions.
what do you get excited about?
What do you NOT want to be cought doing?
Going to an interview! What describes what you`ll do?
favorite thing to do?
Will you comment on this? (please)
what best descirbes you? (be HONEST)
|
s3://commoncrawl/crawl-data/CC-MAIN-2019-30/segments/1563195525094.53/warc/CC-MAIN-20190717061451-20190717083451-00552.warc.gz
|
CC-MAIN-2019-30
| 247
| 7
|
https://contents.driverguide.com/content.php?id=1452&path=MSLANMAN.DOS%2FLMDOS.TXT
|
code
|
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex ParaPort2 Ethernet Adapters º º (C) Copyright PDS, 1996. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1) INTRODUCTION =============== This directory contains the following files for installing the ParaPort2 Ethernet adapter on a DOS LAN Manager workstation. The file layout in the current directory is shown as below: MSLANMAN.DOS | |--- LMDOS.TXT This file |___ DRIVERS | |___ ETHERNET | | | |___ PLINK2 | |___ PLINK2.DOS | |___ PROTOCOL.INI | |___ NIF | |_____ PLINK2.NIF 2) NDIS Driver Installation for MS-DOS LAN Manager v2.0 workstation =================================================================== 1. LAN Manager should already be installed in your computer. In the Lan Manager directory, run SETUP.EXE 2. Select <Actions> from the top menu 3. Select <Import network drivers> to load the driver. Insert the driver diskette into a drive and enter correct source drive letter. SETUP will then create the appropriate directory and transfer the driver from the diskette. After this step, the driver is loaded. If you want to change the existing driver, then you should go through the following steps: 4. Select <View/Modify> from the top menu. 5. Select <Network Drivers>. The existing network driver configuration and all network adapters and protocols supported are shown. 6. Remove the existing configuration by choosing <Remove>. 7. Select "Compex Paraport2 Ethernet Network Adapters" in the <Network Adapter Card> box and choose the apporpriate protocol in the <Protocol> box. 8. Select <Add Driver> to add a hardware driver and <Add Protocol> to add a protocol driver to the <Network Configuration> box. 9. Select <Done> to exit the main menu. Select <Save> from the <Action> box to update the changes. 3) NDIS Driver Installation for MS-DOS LAN Manager v2.1/2.2 workstation ======================================================================= 1. LAN Manager should already be installed in your computer. In the Lan Manager directory, run SETUP.EXE 2. Select <Network Driver> from the <Configuration> menu. 3. In the configuration window, choose <Add New Config>. 4. Select <Other Driver>. 5. Insert driver diskette in the floppy drive A: and press Enter. 6. Select "Compex ParaPort2 Ethernet Network Adapters". The driver will be copied into the Lan Manager. 7. In the Network Protocol window, you may use Netbeui protocol. 8. Save the Lan Manager configuration. Exit from Lan Manager setup. Reboot the workstation to make the changes effective.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-23/segments/1685224649518.12/warc/CC-MAIN-20230604061300-20230604091300-00797.warc.gz
|
CC-MAIN-2023-23
| 3,500
| 11
|
https://channel9.msdn.com/Niners/Gregory81
|
code
|
Now I'm thinking that IO<IO<T>> can actually model observable collections (not related to Rx, implementing INotifyCollectionChanged interface) with events being 'element is inside collection at specific position'. Then we can get LINQ to observable collections for free.
@bdesmet:About GroupBy and Buffer methods. That's the best what I can come up with:
The elements of IE<T> and IO<T> can be associated with additional values: index and time (for IO<T>). These values arise from specific properties of Bind operator of each monad.
For IE<T> Bind preserves internal ordering of elements within containers. It is possible to write non-preserving version too (and Px has that version AFAIR). Even inside standart LINQ not all operators respect the order (for example, Union and other set-related operators but that's because they should belong to different monad). However basic operations do preserve the order.
For IO<T> as events have global order (they can be ordered by time when an event happened) Bind preserves that global order.
Buffer operators do partitioning based on these additional values and preserve the ordering while GroupBy family does not.
First of all the easy part: not so catastrophic version of Aggregate is Scan.
On lazyness as the main monadic aspect of IEnumerable. The problem is that both IEnumerable and IObservable are quite complex creations. There are at least three (maybe more) aspects in IEnumerable (like returning multiple values, handling exceptions and deferring side-effects) and at least four (or even five) in IObservable. Had we used haskell (not that I know it), instead of IEnumerable we'd written something like List<Error<IO<T>>> (or sometimes Set<Error<IO<T>>>). In Ix there are a lot of operators that leave one monadic aspect or the other. Like Catch leaves Error monad, or SumEnumerable leaves List monad (but not IO monad) - in some sense these are catamorphisms. Of course, if we're talking of IO as a main part of IEnumerable monad then indeed Cata would equal to unsafePerformIO.
What I was trying to say in previous post, given that the only way to deconstuct a monadic value is Cata, you'd had to use it somehow in the implementation of Bind.
By the way I think it can be good exercise to write approximate signatures of Ix and Rx operators in haskell, taking side-effects and exceptions into account.
Erik's paper is my reading list (already quite some time). I yet had to get used to all hylomorphisms and co.
@bdesmet: On difference between GroupBy and Buffer* methods. GroupBy adds new "monadic layer", so it's signature (not taking Keys into account) should be M<T> -> T -> TKey -> M<M<T>>. It looks like specialized version of Ana applied to already existing monadic value as a seed.
Buffer is a different beast as it adds takes M<T> and produces M<List<T>>.
Using Cata is rarely useful in operators itself, and in fact harmful as it breaks laziness. One exception is where you got to see the whole sequence anyway before you can produce any output.
Didn't get that part. If Cata itself is lazy there should not be any problems. Or you mean that lazy invocations of Cata are usefull and direct invocations are harmfull?
Correct me if I'm wrong, but I thought that for every monad there exist Ana-Cata pair and every monadic operation may be written in terms of Ana and Cata. However in general there's no easy way to find Ana and Cata for a given monad.
assume your team has only the budget to use one try...catch block in the entire codebase of your LINQ to Objects implementation of the Standard Query Operators (i.e. IEnumerable<T> based). How'd you spend it (*) such that you can easily implement error-handling operators in the future?
That can be done using operator analogous to Materialize of Ix. It makes transition from implicit exception-handling mode to explicit Error monad.
I think that there are two different things that got mixed:
1) similarity of definitions of co- and contravariance in physics and programming
2) similarity of coordinatization to going to Monad
It should be possible to prove first without considering second. When we do Select on IEnumerable<> we're allowed to change type of element. Coordinatization might be treated similarly to such type change.
If we're talking about second then we probably need to take into account not only coordinatization of positions but also linear approximation needed to make continuous versions of
f and p.
I think that we should operate not on values but on functions, and there should be different type constructors when we're talking about time and fuel.
Something like this, e.g. for fuel CF<P,C(P)> = (P -> F) -> (C(P) -> F) .
Values of such types should describe how function from position to fuel changes when we switch coordinate system from P to C(P)
And then we should prove that corresponding functor is co-variant.
Or, probably that's overcomplicated. Maybe type constructor CF<P> = P -> F is sufficient. Then to define functor we need mapping CF:: P -> (P -> F) that is for each coordinate system we should have function from position to fuel. And then we need to show
that CF:: (P -> CP) -> ((P->F) -> (CP->F)) is co-variant functor. Hm, type parameter P is in input position. There should be contra-variance then.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-30/segments/1531676591831.57/warc/CC-MAIN-20180720193850-20180720213850-00362.warc.gz
|
CC-MAIN-2018-30
| 5,262
| 30
|
https://forum.mapillary.com/t/bug-low-quality-image-is-not-properly-aligned/3238
|
code
|
On my OnePlus 5, when I set the image to low quality to save space and bandwidth, either the aspect ratio mismatch or the cropping causes the HUD target thing to be misaligned.
The images below were taken with the phone in the exact same place:
Needs scaling and testing on screens with extreme aspect ratios?
edit: also, some thoughts around this point/feature:
- The low/high quality switch is a bit extreme on recent phones. For me the options are from 3456x4608 (15 megapixels) or 1280x720 0.9 megapixels.
- Using webp saves about 1/3 in OpenCamera on Android.
- Thinking of using stuff learned from modern video codecs, saving the whole sequence using h.264 might yield reasonable results.
|
s3://commoncrawl/crawl-data/CC-MAIN-2019-35/segments/1566027313428.28/warc/CC-MAIN-20190817143039-20190817165039-00173.warc.gz
|
CC-MAIN-2019-35
| 694
| 7
|
http://www.coderanch.com/t/308095/EJB-JEE/java/ee-ejb
|
code
|
This week's book giveaway is in the OCAJP 8 forum. We're giving away four copies of OCA Java SE 8 Programmer I Study Guide and have Edward Finegan & Robert Liguori on-line! See this thread for details.
Need Some help in deploying using j2ee server. The JAVA_HOME is set to c:\jdk1.2 J2EE_HOME=c:\j2sdkee1.2.1 Every class compiled fine.It's the first eg that i tried in j2ee. I am disappointed with the performance. Please help me asap. The error is during the deployment stage. throws the error saying: java.rmi.ServerException: Exception in Server Thread. The Nested Exception is: java.rmi.ServerException: Error processing ejb jar. Error in opening/saving. Another machine passed this stage and throws another error. java.rmi.ServerException: Exception in Server Thread. The Nested Exception is: java.rmi.ServerException: Could not invoke javac. Thanks in advance. Shenoj Sebastian.
|
s3://commoncrawl/crawl-data/CC-MAIN-2015-35/segments/1440645356369.70/warc/CC-MAIN-20150827031556-00175-ip-10-171-96-226.ec2.internal.warc.gz
|
CC-MAIN-2015-35
| 884
| 2
|
https://hagyniesserci.com/terms/h/hyperledger-composer89fp4840g6.asp
|
code
|
Hyperledger Fabric is a _____ type of blockchain framework. public, permissioned Which of these is not a part of the Hyperledger umbrella? Corda The _____ tool provides a shared, reusable, interoperable toolkit for solutions focused on creating, transmitting, and storing verifiable digital credentials. Aries The native currency of an Ethereum network is Answer: Hyperledger Explorer is a part of the Hyperledger Umbrella projects. It lets developers create a web application to view/query blocks, associated data, and transactions in Hyperledger. It also enables you to check transaction families and any other information that is available in the ledger. 6 Hyperledger Says Hello to Cello. Today, we're excited to welcome a new project to Hyperledger, Cello. Cello is a toolkit for deploying a Blockchain-as-a-Service, that reduces the effort required for creating, managing, and terminating blockchains. Hyperledger serves as an umbrella for software developer communities building open source. In December 2015, the Linux Foundation in conjunction with a number of companies announced the Hyperledger Project. These companies are now a part of the Hyperledger Project. As of May 2019, there are 14 projects in the Hyperledger greenhouse, six of which are distributed ledger frameworks, such as Fabric, Indy, Sawtooth, etc Let's take a moment and analyze the comparison of Hyperledger vs Corda vs Ethereum to see how each of these platforms perform. While the three frameworks showcase the benefits and applications of distributed ledger technologies, they differ a great deal when it comes to vision as well as a possible field of application. Hyperledger and Ethereum come with different concrete use cases, whereas.
Overview of Hyperledger frameworks such as Iroha, Sawtooth, Fabric, Indy, and Burrow. Overview of Hyperledger modules such as Cello, Explorer, and Composer. This is a 10 part series Review of Five popular Hyperledger DLTs- Fabric, Besu, Sawtooth, Iroha and Indy; Review of three Hyperledger Tools- Caliper, Cello and Avalon; Review of Four Hyperledger Libraries- Aries, Quilt, Ursa, and Transact; Hands-On Smart Contract Development with Hyperledger Fabric V2 Book by Matt Zand and others. Essential Hyperledger Sawtooth. Hyperledger Sawtooth. Hyperledger Sawtooth is an enterprise distributed ledger modular platform for building, deploying, and running Blockchain network. The most striking features of this framework are some of the following: Scalability: Sawtooth was originally designed to overcome scalability challenges of a typical blockchain network such as Bitcoin. To meet the scalability requirement, the.
Sawtooth, Indy, Burrow, And Iroha. Each one of these Hyperledger projects began life outside of Hyperledger, to begin with, Hyperledger Cello. Hyperledger Cello is a blockchain arrangement and operation framework, which oversees blockchain systems. Hyperledger Composer Hyperledger Composer is a joint effort instrument for building blockchain business systems, quickening the improvement. That's not an issue with Corda where R3 is seen as symbiotic rather than competitive. For the avoidance of doubt, Hyperledger, part of the Linux Foundation, is hugely supportive of developers. It's a market perception issue. Monetago's solution . The current Monetago solution creates an indecipherable hash of invoices which is stored on a blockchain. By checking the blockchain before. Simply put, we see Hyperledger as an umbrella for software developer communities building open source blockchain and related technologies. In this blog post, I'm going to try to define what we mean by umbrella, that is, the rationale behind it and how we expect that model to work towards building a neutral, foundational community In this, the Indy node and the server part are built-in Pythons, but Indy SDK is in Rust. It provides reusable elements and tools to handle digital identities on other distributed ledgers or blockchains. Hyperledger Cello. This project is known as a model for blockchain deployment as a service that is under Hyperledger blockchain development. Hyperledger Composer. It can be understood as a.
Hyperledger (or the Hyperledger project) is an umbrella project of open source blockchains and related tools, started in December 2015 by the Linux Foundation, and has received contributions from IBM, Intel and SAP Ariba, to support the collaborative development of blockchain-based distributed ledgers. History and aims. In December 2015, the Linux Foundation announced the creation of the. Hyperledger Fabric; r3 Corda etc And amongst them, Ethereum and Hyperledger are the most talked-about blockchain platforms currently in the market. So it makes sense in discussing them first. Let's get started: Ethereum vs Hyperledger Fabric. Ethereum Blockchain; First thing first: Ethereum and Hyperledger are both built to achieve different goals and to understand these goals we need to. . It reduces the efforts required to create, maintain and terminate blockchains. Providing a multi-tenant chain service, Hyperledger Cello works on top of multiple infrastructures, for e.g. baremetal, container platforms and virtual machine.
It is designed to create an enterprise-grade, open-source, distributed ledger framework to improve business transactions. Ethereum, on the other hand, runs the Smart Contracts on the EVM for applications that are attributed to being decentralized and are for mass consumption. Hyperledger is for a B2B business, whereas Ethereum is a B2C business Hyperledger Cello This Blockchain module toolkit helps devise and deploy Blockchain-as-a-Service platforms to provision customizable Blockchain networks in easier, faster, and seamless manners. One can check the system status, adjust chain numbers, scale resources, and pull off several important yet difficult tasks through dashboards provided by the toolkit Hyperledger Sawtooth Hyperledger Cello: Cello is a The committee is formed of more than 10 executives who are leaders of other member associations and companies that are part of the organization. These executives have been chosen because of their immense experience in the field as well as their connections and influence in several industries. Hyperledger itself acts like a hub that not. Hyperledger Cello. Hyperledger Cello was first provided by IBM and sponsored by Intel, Huawei, and Soramitsu. It's a blockchain module kit extensively used for the blockchain ecosystem. Cello considerably reduces the effort needed to develop, manage, and terminate blockchains. Not only that, this tool is also able to work on top of a number. The Linux Foundation hosts Hyperledger as an umbrella project. It offers a variety of frameworks, tools, standards, and guidelines for developing blockchain applications. It comprises frameworks like Indy, Burrow, Fabric and Sawtooth, and tools like Cello, Quilt, and Caliper. Blockchain developers may use these tools and frameworks for hyperledger blockchain application development that.
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-49/segments/1637964362619.23/warc/CC-MAIN-20211203091120-20211203121120-00331.warc.gz
|
CC-MAIN-2021-49
| 7,003
| 5
|
https://www.zdnet.com/article/salesforces-chatter-available-aims-to-bring-in-new-enterprise-customers/
|
code
|
Salesforce's Chatter available, aims to bring in new enterprise customers
Salesforce.com's Chatter corporate social networking platform is now generally available. For existing customers, Chatter is free as a new feature. The company has a Chatter-only option for $15 a month for each user.
Salesforce.com on Tuesday said that its Chatter corporate social networking platform is now generally available. For existing customers, Chatter is free as a new feature. The company has a Chatter-only option for $15 a month for each user.
Chatter takes the best features of Facebook and Twitter and integrates them into the enterprise. According to Salesforce.com Chatter will enable customers to better track documents, internal expertise and real-time data.
Meanwhile, Chatter is designed to bring in more customers to Salesforce.com's ecosystem. Salesforce.com has 77,300 customers---5,000 of them that played with Chatter in beta---but executives see the platform as a way to bring in new users.
Salesforce.com will walk customers through Chatter partnerships and features at its CloudForce 2010 powwow.
Al Falcione, senior director product marketing at Salesforce.com, said the company is hoping to expand Chatter usage within an enterprise. When Chatter gains more users it will likely be more beneficial to companies.
Here are a few screenshots of Chatter in action. We have a more detailed walkthrough in a gallery.
In addition, major enterprise players plan to integrate Chatter into their Force.com applications. CA Technologies has built a development application that integrates Chatter to better track projects. BMC Software also plans to integrate Chatter into its BMC ServiceDesk application on Force.com. Salesforce.com will also be a reseller of ServiceDesk. Both will be available on the ChatterExchange.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-40/segments/1695233510707.90/warc/CC-MAIN-20230930181852-20230930211852-00889.warc.gz
|
CC-MAIN-2023-40
| 1,814
| 9
|
https://simplelookups.com/2014/06/simplelookups-1-6-released/
|
code
|
Today, I released SimpleLookups v1.6.0. This version includes the following changes:
- Specify column suffixes for Name/Description/Code/Id columns.
- Specify column name of Active column.
- Specify whether or not to prepend the table name to the column names.
- Core improvements/optimizations.
Version 1.6 is now available on NuGet and on this site. I recommend NuGet, but to each their own.
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-21/segments/1652662580803.75/warc/CC-MAIN-20220525054507-20220525084507-00761.warc.gz
|
CC-MAIN-2022-21
| 393
| 6
|
https://learn.microsoft.com/en-us/answers/questions/1351639/api-management
|
code
|
Hi @Vishnu A
No, a single token cannot be used to access different services, because access tokens are issued based on API audiences, one token cannot have multiple API audiences, you need to obtain separate access tokens for different types of APIs.
Hope this helps.
If the reply is helpful, please click Accept Answer and kindly upvote it. If you have additional questions about this answer, please click Comment.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817200.22/warc/CC-MAIN-20240418061950-20240418091950-00836.warc.gz
|
CC-MAIN-2024-18
| 415
| 4
|
https://www.mathway.com/Calculator/acceleration-calculator-average-acceleration
|
code
|
Enter the values of final velocity, initial velocity and time which you want to find an average acceleration of a moving object.
The acceleration calculator finds an average acceleration of the object using the given values.
Average acceleration of the object is given by
Click the blue arrow to submit. Choose "Find the Average Acceleration" from the topic selector and click to see the result in our Physics Calculator!
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474541.96/warc/CC-MAIN-20240224144416-20240224174416-00367.warc.gz
|
CC-MAIN-2024-10
| 421
| 4
|
http://aquagamer.blogspot.com/2011/07/role-playing-games-101-part-one.html
|
code
|
Over the past few years most of my friends have been the people in the SciFi club at college. Most of these people know the basic ideas of role playing even if they don't actually play. Recently, however, I have been spending a lot of time around people who don't know what a pen and paper RPG is. I usually try and fail to explain what RPGs are to them so I think I will dedicate a few posts to that goal.
The basic idea of pen and paper role playing games is the same as the games we used to play as little kids. You know those games, the ones where you pretended to be space men or princesses or wizards or sometimes normal people just someone who wasn't you. When we are little we all love to pretend to be someone else so we do, a lot of times we are encouraged to do this. At some point though it stops. We are discouraged from spending so much time in idle fantasy and start playing games with clearly defined limits and squares and rules.
(Now I won't say that role playing games aren't like that at all or that all different games/groups/scenarios are the same. This post is really just about the general idea behind the games I will probably get into more of the particulars in later posts in this series.)
Role playing games are a chance to break the mold, to BE that wizard/princess/spaceman/other person again. Of course since we are older we have to make some boundaries so that we don't spend all our time arguing about whether our spell or attack was effective on our opponent. There are rules set out in advance either by some company that made the game or by the person who is running the game.
So the end result is that you can pretend to be pretty much whatever you want and usually pretend to fight monsters or evil scientists or something (as I said I will have more on the mechanics of RPGs at a later date.) The best part is probably hanging out with friends while doing it but the games themselves are pretty dang fun if you have the imagination to go with it.
|
s3://commoncrawl/crawl-data/CC-MAIN-2013-20/segments/1368699056351/warc/CC-MAIN-20130516101056-00036-ip-10-60-113-184.ec2.internal.warc.gz
|
CC-MAIN-2013-20
| 1,985
| 5
|
https://archiveshub.jisc.ac.uk/search/archives/588db966-a187-397a-9028-c2695d87d509?component=43f5e62d-2b01-3411-8c98-e10d57f789db
|
code
|
1. Richard Jones of Tythyn Mawr, co. Caernarfon, yeoman.
2. Arthur Hughes of Caure, co. Caernarfon, yeoman, and Robert Hughes of Manachtu, co. Caernarfon, joiner.
3. Maragaret Evans of Manachtu, widow, late wife and executrix of Hugh Arthur, deceased.
Settlement (after the marriage of the said Richard Jones and Mary, eldest daughter of the said Hugh Arthur and Margaret) of a messuage, tenement and lands in Bodverin [Bodferin], called Hendrefor; (excepting a close called Cae Hendrefor; a messuage and lands in Aberdaron called Deunant; and messuages and lands (unspecified) in Rhiw.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-14/segments/1679296945282.33/warc/CC-MAIN-20230324113500-20230324143500-00571.warc.gz
|
CC-MAIN-2023-14
| 586
| 4
|
https://www.sparrho.com/item/ndufs4-creation-of-a-mouse-model-mimicking-a-complex-i-disorder/392f09/
|
code
|
Indexed on: 23 May '09Published on: 23 May '09Published in: Mitochondrion
The Complex I NADH dehydrogenase-ubiquinone-FeS 4 (NDUFS4) subunit gene is involved in proper Complex I function such that the loss of NDUFS4 decreases Complex I activity resulting in mitochondrial disease. Therefore, a mouse model harboring a point mutation in the NDUFS4 gene was created. An embryonic lethal phenotype was observed in homozygous (NDUFS4(-/-)) mutant fetuses. Mitochondrial function was impaired in heterozygous animals based on oxygen consumption, and Complex I activity in NDUFS4 mouse mitochondria. Decreased Complex I activity with unaltered Complex II activity, along with an accumulation of lactate, were consistent with Complex I disorders in this mouse model.
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-17/segments/1618038916163.70/warc/CC-MAIN-20210419173508-20210419203508-00534.warc.gz
|
CC-MAIN-2021-17
| 759
| 2
|
https://h30434.www3.hp.com/t5/Desktops-Archive-Read-Only/Move-MS-Office-Software/td-p/2351437
|
code
|
I purchased a new HP desktop which will replace an older unit that I am presently using. About a year ago I had a problem with the MS Office software that came with the older desktop unit and quickly needed to use the Office product. Not knowing the options, I went online, bought and downloaded MS Office 10 to the HP Desktop.
I never had a disc for the software.
Now I would like to transfer the new MS Office to the new computer. Is there anyway possible to download the Office software to a disc and then install on the new computer?
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-45/segments/1603107880656.25/warc/CC-MAIN-20201023043931-20201023073931-00176.warc.gz
|
CC-MAIN-2020-45
| 537
| 3
|
https://lfs.lug.org.cn/museum/lfs-museum/3.0-pre2/LFS-BOOK-3.0-pre2-HTML/ch05-installasroot.html
|
code
|
It's best to log in as root or su's to root when installing the packages. That way you are assured that all files are owned by user and group root (and not owned by the userid of the non-root user), and if a package wants to set special permissions, it can do so without problems due to non-root access.
The documentation that comes with Glibc, Gcc, and other packages recommend not to compile the packages as user root. We feel it's safe to ignore that recommendation and compile as user root anyway. Hundreds of people using LFS have done so without any problems whatsoever, and we haven't encountered any bugs in the compile processes that cause harm. So it's pretty safe (never can be 100% safe though, so it's up to you what you ends up doing).
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712297295329.99/warc/CC-MAIN-20240425130216-20240425160216-00182.warc.gz
|
CC-MAIN-2024-18
| 749
| 2
|
https://learn.microsoft.com/en-us/archive/blogs/stevenpr/write-your-own-gc-heap-viewer-for-the-net-compact-framework
|
code
|
Write your own GC Heap Viewer for the .Net Compact Framework
The last few versions of the Remote Performance Monitor enable you to view snapshots of the GC heap on demand. The view of the heap presented by RPM is oriented around finding managed memory leaks. Specifically, the data is organized so that it's easy to see which GC root is responsible for keeping a given object instance alive.
We hope the views are well organized and easy to understand, but if you find they don't suite your needs for any reason you can write your own tool to analyze and display the heap data. For example, maybe you want a fancier graphical representation, or you want a view tailored to a scenario other than finding memory leaks.
You can't currently plug your new UI directly into RPM but you can save the heap snapshots to a file and create your own tool to view the data.
In this post I'll briefly describe how to save the heap data then I'll provide the details of the file format.
Saving a GC Log
Saving a snapshot of the GC heap to a file is easy: Given an open view, just select the "Save" option from the "File" menu:
You'll also be prompted to save any unsaved views when you close them.
The GC Log File Format
GC heap dump files are text files that include information for every object present in the GC heap at the time the heap dump was generated using RPM.
Each line in the text file contains one record. There are 5 different types of records:
- AppDomain record. Identifies the application domain for which a dump file applies.
- Type record. Describes a type present in the heap.
- Object record. Describes an instance of a type present in the heap.
- Root record. Describes a root instance.
- End AppDomain record. Marks the end of the dump file.
Each record contains a number of elements separated by spaces. The first element in each line indicates the record type. Here's a portion of a dump file:
Note: This example is intended to show format only - it's likely not semantically accurate.
a 2 bubblecs.exe
t 2 System.RuntimeType
o 7c79f 2 64
t 1 System.NullReferenceException
o 7cb42 2 64
o 1ce004 1 18
t 3 System.OutOfMemoryException
o 1ce056 1d 118 1ce11f 1ce14c 1ce079 1ce113 1ce116 1ce267 1ce26a 1ce26d
r 22c81b 5 0
o 22c81e 1b 24
r 22c81e 5 0
o 22c823 1b 28
r 22c823 5 0
An AppDomain record initiates a section of the file pertaining to a particular application domain. Within that section is all the type, object and root information for the managed objects in that application domain. All AppDomain records are closed with a corresponding End AppDomain record.
The AppDomain record has 4 elements:
- The letter "a". Identifies the record as an application record.
- Version number. A number used to track the file format of the dump file itself. In the current releases this number will always be "2".
- AppDomain Name. The name of the application domain from which this dump file was generated. This is typically the name of the exe that was run in the app domain.
- Timestamp. The time at which the heap dump was take. RPM obtains this number by calling the WinCE API GetTickCount.
a 2 NHLSchedule.exe 444d20df
Type records identify types in the GC heap. Each type record contains 3 elements:
- The letter "t". Identifies the record as a type record.
- Type ID. A unique numerical identifier for this type. This identifier is used to tie object instances to their types (see description of Object Records below).
- Type name. The fully qualified name of the type.
t a1 Western.Pacific.SanJoseSharks
- Type identifiers are not guaranteed to be unique across dump files. For example, the identifier for the "SanJoseSharks" type in the example above isn't guaranteed to be a1 in a different dump taken from the same application at a different point in time.
Object records describe specific instances of types in the GC heap. Object records have a variable number of elements. The first 4 elements are required:
- The letter "o". Identifies the record as an object record.
- Object ID. A unique numerical identifier for this object.
- Type ID. The identifier for the type of this object.
- Object size. The size in bytes for this instance.
In addition to these required elements, object records will have a variable number of additional elements describing the instances that the object references.
- Referenced Object IDs. The identifiers for all objects that this object references.
An example with referenced object ids:
o 1c15d2 3 1c 1c15db 1c15d8 1c15d5
- Object identifiers are not guaranteed to be unique across dump files. This point is important for tools writers: It is not possible to develop tools that identify trends across dump files because a given object instance in one dump isn't guaranteed to have the same identifier in a later dump of the same heap.
- The type record corresponding to a particular object record is not guaranteed to precede the object record in the dump file.
Root records identify GC roots. Each root record contains 4 required elements:
- The letter "r". Identifies the record as a root record.
- Object ID. The identifier of the object that is this root.
- Root kind. The reason this object instance is a root. One of the following values:
1 The object instance is a local variable.
2 The object instance is on the finalizer queue waiting for its finalizer to be run. After the finalizer is run the object will be collected during the next GC.
3 A GC handle exists which refers to the object instance (i.e System.Runtime.InteropServices.GCHandle)
4 The object instance is a static variable.
5 The object instance is a root specific to the Compact Framework's GC implementation. Examples include interned strings or class descriptions.
0 The object instance is rooted internally by the Compact Framework. Examples include object instances for application domains, assemblies, exceptions and so on.
- Root flags. A set of flags providing more information about the root:
0x1. The root is pinned. There are several cases in which a root may be pinned. For example, the root may refer to managed objects that have been passed out to native code via PInvoke or COM interop, the root may be referenced by a GCHandle created with a GCHandleType of Pinned or a pointer in unsafe code points to the root.
The .Net Compact Framework CLR may also pin objects on your behalf as it runs your application. The CLR will pin an object if it places a reference to that object in a register or refers to that object from the stack. An object will also be pinned if a local variable or method argument points to a field within the object. The CLR doesn't pin objects very often, but if one of the more obvious reasons don't explain why an object is pinned, it may be because of one of these "hidden" cases.
0x2. A GCHandle whose GCHandleType is Weak refers to the object.
0x4. The object is pointed to by a pointer in unsafe code or has a local variable or method argument points to a field within the object.
If the root kind is static, the root record will have an additional element:
- Root container. The identifier of the type the static variable is contained in.
Here's a root record with the additional root container element:
r b2753 4 0 13c
End AppDomain Record
End AppDomain records close the section initiated by a corresponding AppDomain record. End AppDomain records have three elements:
- The letter "c". Identifies the record as an end record
- Application Name. The name of the application from which this dump file was generated. This name matches the name in the application record at the beginning of the file.
- Timestamp. The timestamp from the corresponding AppDomain record.
This posting is provided "AS IS" with no warranties, and confers no rights.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-06/segments/1674764500035.14/warc/CC-MAIN-20230202165041-20230202195041-00666.warc.gz
|
CC-MAIN-2023-06
| 7,709
| 80
|
https://bugreports.qt.io/browse/QTBUG-90617
|
code
|
In https://codereview.qt-project.org/c/qt/qtcharts/+/330692 it was discovered that qtbase doesn't set the INTERFACE_QT_COORD_TYPE property on the Core target. It only gets added to the Qt6::Core target by the Qt6CoreConfig.cmake file and only when QT_NO_CREATE_TARGETS is not true. This means INTERFACE_QT_COORD_TYPE is only set if you are building against an installed Qt or if you are doing a per-repo build against an already-built qtbase. It is NOT set if your are doing a top level superbuild or building just qtbase. It is also not set if building examples.
The target's COMPATIBLE_INTERFACE_STRING also needs to have QT_COORD_TYPE added (it is suffering from the same problem and only gets updated for the same cases mentioned above).
The handling of QT_MAJOR_VERSION also seems analogous, but that one seems a bit more complicated and should be addressed in its own separate issue (it interacts with autogen).
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-49/segments/1669446711712.26/warc/CC-MAIN-20221210042021-20221210072021-00725.warc.gz
|
CC-MAIN-2022-49
| 917
| 3
|
https://www.cumberlandlodge.ac.uk/person/favour-borokini/
|
code
|
Hello, I’m Favour, a Horizon Centre for Doctoral Training PhD student at the University of Nottingham School of Law. I’m researching afro-feminist ethics concerns in the design and use of avatars in the School.
After completing my law degree in Nigeria, I worked in technology policy research with various organisations in Africa. I was primarily interested in the impact of both subsisting and emerging technologies like AI on women’s lives and gender equality, as well as the impact of these technologies on Africa. I led the African women in AI project with Pollicy, a Ugandan non-profit as a Data and Digital Rights researcher, drawing on my legal training.
These experiences influence my current research, and I’m keen on proactively exploring better futures with and through technology, especially for African women, who are underrepresented in these studies.
For fun, I enjoy fantasy and romance and travelling to imaginary worlds.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712297292879.97/warc/CC-MAIN-20240425094819-20240425124819-00868.warc.gz
|
CC-MAIN-2024-18
| 946
| 4
|
https://www.semanticscholar.org/paper/Generic-Components-A-Symbiosis-of-Paradigms-Becker/89520b8c3e845b0c5c29a42017c4116eedb6b37a
|
code
|
Software reuse and especially the paradigm of software components are promising approaches to increase the efficiency of software development. One of the basic problems of software reuse, however, is the tradeoff between the abstraction from project-specific aspects on the one side, and the actual contribution of a reusable artifact during the realization of a new system on the other side. Stringent resource constraints further complicate the application of these approaches in domains, where efficient and therefore specialized solutions are required, e.g. in the domain of embedded systems. Generic components, which are designed and implemented to be adaptable to new application scenarios, allow to overcome these limitations, esp. if they somehow automate the essential modifications. This paper presents a concept of generic components that has been developed to facilitate the construction of highly specialized embedded operating systems. Besides the illustration of the underlying concept, the paper discusses the external representation of generic components and the internal realization of the provided variability. Futhermore it shows how generic components may be automatically instantiated by tools, and reflectes some of our experiences in constructing generic components.
|
s3://commoncrawl/crawl-data/CC-MAIN-2017-51/segments/1512948517917.20/warc/CC-MAIN-20171212192750-20171212212750-00474.warc.gz
|
CC-MAIN-2017-51
| 1,291
| 1
|
https://www.cloudera.com/campaign/modernizing-the-analytic-database-with-cloudera-enterprise.html
|
code
|
Modernize analytics for speed, scale, and flexibility.
Modernizing Data Warehousing
Cloudera's analytic database lets you expand beyond the constraints of your current systems and optimize your data warehouse landscape for the needs of tomorrow. Not only can you power fast, flexible ETL and BI analytics, but at a fraction of the cost and with the scalability to start saying yes to more, without the risk.
Tap into even more value from your expanded DW landscape with an open architecture that can enable new and advanced analytics, and machine learning.
Fill out the form to learn:
How to start saying “Yes” to business needs with cost-effective scale
How to deliver on self-service requirements
How to leverage the cloud
And how to go beyond SQL with open architecture
Your form submission has failed.
This may have been caused by one of the following:
Your request timed out
A plugin/browser extension blocked the submission. If you have an ad blocking plugin please disable it and close this message to reload the page.
|
s3://commoncrawl/crawl-data/CC-MAIN-2019-22/segments/1558232256812.65/warc/CC-MAIN-20190522123236-20190522145236-00255.warc.gz
|
CC-MAIN-2019-22
| 1,029
| 13
|
https://researchportal.port.ac.uk/en/publications/why-galaxies-care-about-agb-stars-modeling-galaxies
|
code
|
The Thermally-Pulsating Asymptotic Giant Branch (TP-AGB) phase of stellar evolution has received attention only recently in galaxy evolution, but is now an important player in our understanding of how galaxies form and evolve. Because it is a short but very luminous phase, bright in the near-IR where dust effects are small, the TP-AGB phase is a powerful tracer of intermediate-age stars in galaxies up to high redshift. The spectral signature of TP-AGB stars as defined by population synthesis models has been detected by the Spitzer Space Telescope in high-redshift galaxies, whose spectra show an amazing similarity to spectra of local stellar populations. Even accounting for the high uncertainty affecting the theoretical modelling of this phase, stellar population models including the TP-AGB have leveraged a better determination of galaxy ages and hence stellar masses, fundamental quantities for studying galaxy formation and evolution. They have also improved the results of semi-analytic models, which can better reproduce colours and the K-band luminosity function of high-z galaxies.
|Publications of the Astronomical Society of the Pacific
|Published - Mar 2011
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817153.39/warc/CC-MAIN-20240417110701-20240417140701-00142.warc.gz
|
CC-MAIN-2024-18
| 1,177
| 3
|
http://www.hitsquad.com/smm/programs/Arts_linux/
|
code
|
Create sounds & music using small modules like oscillators for creating waveforms various filters modules for playing data on your speakers mixers faders... You can build your complete setup with the gui of the system using the modules.
New synthesis modules can easily be written and integrated in the aRts system The synthesizer consists of two parts - a gui where you can connect the modules - and a low level synthesizer which can execute models. The synthesizer and the gui communicate using CORBA.
New in this version
- New interfaces.
- New Arts::PitchablePlayObject for changing playing speed/pitch.
- Support for streaming of data from kioslaves into PlayObjects.
- Dynamic implementation of classes/attributes.
|
s3://commoncrawl/crawl-data/CC-MAIN-2013-20/segments/1368699812416/warc/CC-MAIN-20130516102332-00071-ip-10-60-113-184.ec2.internal.warc.gz
|
CC-MAIN-2013-20
| 720
| 7
|
https://discourse.processing.org/t/gsoc-2019-international-improvements/9262
|
code
|
My name is Renata Dima and I’m an Interaction Designer studying at the national College of Art and Design in Dublin, Ireland.
I’m really excited to participate for the first time in GSoC’19 and learn as much as I can from the process.
Recently I have been exploring and learning about Linux system administration, programming languages as well as web development with headless API’s and frameworks.
has been through Bare Conductive, Arduino projects, Web Design ,
Robotics competitions and coding sessions during my school and student years.
I have looked through the ideas list and the issue of Internationalizing the
website caught my eye. I would like to contribute with p5.js-website tranlations
by adding support for the following languages :
French Romanian Russian As well as work on the existing website content translations in Spanish.
I have previous experience in translating in these languages, projects to do with JSON objects and YML files.
I have already forked and am looking through the p5.js-website repository to familiarise myself with the codebase and
the requirements for the project I would like to propose .
Would love some feedback on this idea so I can start start expanding and improving on it for community.
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-27/segments/1656104676086.90/warc/CC-MAIN-20220706182237-20220706212237-00002.warc.gz
|
CC-MAIN-2022-27
| 1,243
| 13
|
https://techcommunity.microsoft.com/t5/outlook/outlook-2019-freezing-after-creating-default-pst-file/td-p/828191
|
code
|
I migrated my Outlook 2010 email folders (pst) over to a new Outlook 2019 install with 4 IMAP accounts. It was working fine, but then I created a pst file, made it the default data file, and copied my old calendar and task information into it. I closed Outlook and renamed the 4 ost data files.
On the restart I expected Outlook to create new ost files, which it did, but after 2+ hours it was still "processing". After closing it using Task Manager, I then restarted it and it appeared to open but then was not responding. I did a repair of the pst file, and now when I try to open Outlook I get the message "Cannot start Microsoft Outlook. Cannon open the Outlook window. The set of folders cannot be opened. The file C:\(filepath and filename).pst cannot be opened.
Does anyone have a solution for this? I have done a system restart (Windows 10) as well. I cannot even get Outlook to open where I could remove the data file.
You should try to repair your corrupted Outlook PST files with the help of Inbox Repair Tool. You can also try a professional software to fix PST corruption issues. I would like to suggest Kernel for Outlook PST Repair software. May be it help you.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712297292879.97/warc/CC-MAIN-20240425094819-20240425124819-00866.warc.gz
|
CC-MAIN-2024-18
| 1,176
| 4
|
https://dpoisn.com/images/faces/minions.php
|
code
|
Custom Banner Tutorial
Percentage of Year
Daily News Pick
Animated GIF Archive
Bitcoin Mining. Is it Worth it?
Twitter Bot Examples
Belial - band
Emoticons / Emojis | Minions PNG Set
Click on an image to see the code
Then you can copy/paste the code wherever you want the image to show up...
Disclaimer: I do not own these images. I went and found them by searching around. I have no idea who the original authors are. So I claim no ownership. I'm just making them available.
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-04/segments/1610703514495.52/warc/CC-MAIN-20210118092350-20210118122350-00706.warc.gz
|
CC-MAIN-2021-04
| 475
| 11
|
https://www.synapseindia.com/portfolio/php-website-retail-petyourdog
|
code
|
Client approached SynapseIndia with a requirement to build a website for pet dogs. Client has provided all the designs.
This is a partially built website in which showcases different breed of dogs with their differentiation from other breeds. We have implemented the HTML at the front end as well as backend. This includes admin login and breed listing functionality.The website also contains feedback suggestions and comments section.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296816853.44/warc/CC-MAIN-20240413211215-20240414001215-00543.warc.gz
|
CC-MAIN-2024-18
| 435
| 2
|
https://www.dev-metal.com/preview-release-of-my-php-mvc-project-a-simple-php-mvc-barebone/
|
code
|
Preview-release of (my) “php-mvc” project (a simple php mvc barebone)
Voila! The very first pre-final release of the “php-mvc” repository is online: https://github.com/panique/php-mvc and http://www.php-mvc.net. It’s a very simple but very useful barebone application written in PHP. This little thing is not another framework, it is simply a totally reduced file-and-folder structure that should 1.) help developers to create PHP applications without a framework the right way and 2.) show younger devs how “good” code could look like and how MVC applications are structured. I know, some people will scream now “but why you don’t learn Zend2 etc. ?”, but that’s exactly the point: Many younger developers simply have problems to learn Zend2 etc.! Most mainstream frameworks, even the micro ones, are really hard to understand, even with some years of PHP experience.
The project aims at people with shorter PHP experience, but tries to fit the most modern PHP standards at the same time. We are talking about PSR-1/2, autoloaders, Composer, PDO, MVC for sure, potential Unit Testing (just a plan!), Post/Redirect/Get, speaking variables/methods, proper comments etc.
To give a short introduction how this project looks and behaves, check out these 5 tutorials I’ve made (they are currently images, as this is the best possibility to bring stuff like that into a GitHub README file): And, you’ll find a file/folder structure explanaition on the last one.
Looks quite okay I think. It would be awesome if everybody who’s interested could try out this thing and give feedback, commit improvements or just send hatemails because this project is totally useless. The repo URL is https://github.com/panique/php-mvc, feel to do whatever you want with this skeleton app.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-50/segments/1700679100286.10/warc/CC-MAIN-20231201084429-20231201114429-00440.warc.gz
|
CC-MAIN-2023-50
| 1,792
| 5
|
https://forum.banana-pi.org/t/bpi-r3-mini-ethernet-port-not-properly-working/17511
|
code
|
I installed OpenWRT 23(SNAPSHOT) on my BPI-R3 and having problems with the ethernet port. It comes up on boot for a short time and then goes off. The only thing that helps is to execute via serial console: ifconfig eth0 down ifconfig eth0 up And this partioally several times. I also have the problem that the Bootloader is having problems to get the ETH interface working.
Anybody having similar problems? Is it an “SNAPSHOT” issue? Or a hardware defect?
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817239.30/warc/CC-MAIN-20240418191007-20240418221007-00381.warc.gz
|
CC-MAIN-2024-18
| 459
| 2
|
https://forums.developer.nvidia.com/t/using-cublas-and-cuda-calling-a-custom-kernel-among-blas-calls/3023/1
|
code
|
I have a fairly straightforward application for CUDA BLAS, except for one thing; I need to do a piecewise hyperbolic tangent operation on a vector. This should be a trivial kernel to write (I’ve already written it), but integrating this kernel into my code has shown to be problematic.
Here’s where I am so far:
-I put the kernel code in a .cu file, within my project.
-I downloaded the custom build rule for CUDA, and made sure that MSVC associates that rule with the .cu file (it compiles without any problems).
-I added the following lines to my code:
global void tanhGPU(int size, float *vec); //forward declaration
Since I’m calling cublasInit(), I’m assuming that I don’t need to call CUT_DEVICE_INIT(). I can’t call it anyway, since the compiler complains about all sorts of stuff inside that macro.
Even if I leave it out, I still get the following error:
error C2059: syntax error : ‘<’
…Referencing the call to:
tanhGPU<<1, 32>>(32, test_D);
Any ideas as to what I’m doing wrong?
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-34/segments/1596439737238.53/warc/CC-MAIN-20200808021257-20200808051257-00123.warc.gz
|
CC-MAIN-2020-34
| 1,009
| 12
|
https://www.experts-exchange.com/questions/10081293/Converting-Color-of-fonts.html
|
code
|
I'm using a richedit with a black background and white font. The problem is that when opening a rtf document, usually the fonts are black, so I need to convert them. Now I do it using richedit and looking at each character and converting it to white. But it is slow.
Does anyone know how to make a fast routine, maybe using a memorystream or something.
the routine will be something like this then,
selecting a file with Opendialog load it into a memorystream, do the converting, dump it in Richedit.
But the formatting must be left intact. I'm giving a lot of points. So I would appreciate working code.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-22/segments/1526794870082.90/warc/CC-MAIN-20180527190420-20180527210420-00096.warc.gz
|
CC-MAIN-2018-22
| 604
| 5
|
https://m.dhgate.com/wholesale/kess+programmer.html
|
code
|
Find wholesale kess programmer online from China kess programmer wholesalers and dropshippers. DHgate helps you get high quality kess programmer at bulk prices. DHgate.com provides 116 kess programmer items from China top selected Diagnostic Tools
, Vehicle Tools
, Automobiles & Motorcycles
suppliers at wholesale prices with worldwide delivery. You can find programmer, KTAG V7.020 kess programmer free shipping, ecu programmer kess
and view 6 kess programmer reviews to help you choose.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-30/segments/1531676589557.39/warc/CC-MAIN-20180717031623-20180717051623-00287.warc.gz
|
CC-MAIN-2018-30
| 489
| 5
|
https://forums.developer.nvidia.com/t/kernel-works-sometimes/64836
|
code
|
I am implementing AES algorithm in ECB mode. My basic variable is custom struct (Block) that contains
unsigned char, and represents one block 4x4.
First of all, I am reading some text file and storing it to these blocks. For example, if there is 16000 characters in text file I will make array of 1000 structs (blocks 4x4),so number of blocks is 1000 (using it later as dim numBlocks(1, number_of_blocks)).
After that, I am allocating memory on host and device for plaintext, ciphertext and encrypted text all of them having same size. Those are arrays of structs.
Then I’m using cudaMemCpy to copy data from host to device.
Before calling kernel I set up
dim numBlocks(1, number_of_blocks)
Now there is a problem. For example if input text file contains less than one milion characters everything is working fine, but if number of charaters is greater than one million kernel returns empty array, nothing.
What could be the problem? Is it most likely to be problem with memory or my code (chances are 90%)?
I can provide my code later if necessary.
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-21/segments/1652662512249.16/warc/CC-MAIN-20220516204516-20220516234516-00209.warc.gz
|
CC-MAIN-2022-21
| 1,051
| 10
|
https://www.wiley.com/en-us/ActionScript%3A+Your+visual+blueprint+for+creating+interactive+projects+in+Flash+CS4+Professional+-p-9780470481943
|
code
|
ActionScript: Your visual blueprint for creating interactive projects in Flash CS4 Professional
Visual learners can get up and running quickly on ActionScript programming skills for Flash CS4
If you're a programmer who learns best when you see how something is done, this book will have you up and running with ActionScipt in no time. Step-by-step, two-page lessons show you the core programming foundations you must master to create rich Internet content using the preferred language for work with Flash. The visual approach breaks big topics into bite-sized modules, with high-resolution screen shots to illustrate each task.
You'll learn such skills as how to add interactivity, animate in code, and work with external content to create Flash projects with pizzazz.
- Designed for visual learners, with two-page lessons and step-by-step, fully illustrated instructions
- Covers foundation ActionScript, animating, interactivity, and working with external content
- Demonstrates using the Actions panel, syntax rules, and essential language foundations Shows how to use variables and arrays; write functions, classes, if/else statements, and loops; and work with static classes such as Math
- Explores essential techniques such as loading visual aspects at runtime, text from delimited text files and XML, and server-based assets using Flash Remoting
- Companion Web site features all the code that appears in the text, ready to plug into your Web pages
ActionScript: Your visual blueprint to creating interactive projects in Flash CS4 Professional is the visual learner's way to master ActionScript quickly and easily.
1 INTRODUCING ACTIONSCRIPT.
Understanding Flash Player 10.
Introducing ActionScript 3.0.
Create a New Flash Movie.
Using the Actions Panel.
2 INTRODUCING THE BASIC SYNTAX OF ACTIONSCRIPT.
Understanding Object-Oriented Programming.
Understanding ActionScript Syntax Rules.
Create a Variable.
Understanding Data Types.
Test Your Flash Movie.
Create an Array.
Add and Remove Elements from an Array.
Create an Array in an Array.
Create a Generic Object.
Add Comments to Your Code.
Understanding Coding Best Practices.
3 CONTROLLING OBJECTS ON THE STAGE.
Draw Shapes in Flash.
Create a Symbol.
Insert and Name an Instance.
Set Instance Properties Using the Properties Panel.
Set Instance Properties in Code.
4 WORKING WITH NONVISUAL CLASSES.
Perform Simple Mathematical Operations.
Perform Complex Mathematical Operations with the Math Class.
Generate Random Numbers.
Create Instances of the Date Class.
Perform Math on Dates.
5 WRITING FUNCTIONS.
Write a Function.
Call a Function.
Pass Data to Functions.
Return a Value from a Function.
6 CREATING CUSTOM CLASSES.
Create a Package.
Create a New ActionScript File.
Create a Custom Class Skeleton.
Define Properties of the Class.
Create a Constructor.
Define a Method.
Extend a Class.
Using a Custom Class.
Define a Document Class.
Get and Set Class Properties.
Add a Static Property to a Class.
7 USING EVENTS.
Create an Event Handler.
Call an Event from a Button.
Define Events in a Custom Class.
Remove Event Listeners.
Using the Target Property.
8 CONTROLLING THE TIMELINE IN CODE.
Stop a Movie.
Go to a Specific Frame in a Movie.
Add Code to a MovieClip’s Timeline.
Control a MovieClip from the Main Timeline.
Work with the Stage in Code.
Add MovieClips to the Stage through Code.
Remove Elements from the Stage.
9 WORKING WITH TEXT.
Create a Dynamic Text Field Visually.
Create a Dynamic Text Field in Code.
Create an Input Text Field Visually.
Create an Input Text Field in Code.
Work with TextField Events.
Find Characters within Strings.
Get Pieces of Strings.
Convert Data Types.
10 FORMATTING TEXT.
Understanding the TextFormat Class.
Apply Formatting to a Text Field.
Using HTML Text.
11 MAKING DECISIONS IN CODE.
Write an If Statement.
Using Else and Else If Clauses.
Test Multiple Conditions.
Replace If/Else Clauses with a Switch Statement.
12 LOOPING OVER CODE.
Write a For Loop.
Write a While Loop.
Loop over an Array.
13 ANIMATING IN CODE.
Using the EnterFrame Event.
Animate MovieClips That Scale and Fade.
Change the Speed of Animation.
Using the Timer Class.
Create Tweens in Script.
Ease Tweened Animation.
Allow Users to Drag and Drop Objects.
Animate in 3D.
14 ADDING KEYBOARD CONTROLS.
React to a Key Press.
Using Keyboard Constants.
15 WORKING WITH SOUND.
Understanding Sound in Flash.
Add a Sound to the Library and Play It.
Load and Play an External Sound.
Avoid Errors Due to Loading Delays.
Pause and Resume Sounds.
Control Sound Volume.
Display Information about Sound Files.
16 WORKING WITH VIDEO.
Convert Video to Flash Video.
Using the FLVPlayback Component Visually.
Using the FLVPlayback Component in Code.
Go Full Screen.
Add Closed Captioning.
Style Closed Captions.
17 WORKING WITH DATA.
Understanding XML and E4X.
Embed XML in ActionScript.
Load XML at Runtime.
18 EXCHANGING DATA WITH A SERVER.
Download the Apache Web Server.
Install the Apache Server.
Download Adobe ColdFusion.
Send Data to the Server.
Create XML with ColdFusion.
Create XML with PHP.
Read Data from the Server.
19 DRAWING VECTORS IN CODE.
Draw Lines in Code.
Draw Curves in Code.
Draw Shapes in Code.
Transform Visual Objects.
Add Filters through Code.
Cache Vectors As Bitmaps.
Draw a Bitmap.
Add an Image to the Library and Create a Bitmap from It.
20 WORKING WITH AIR.
Create a New AIR Application.
Digitally Sign Your Application.
Detect User Inactivity.
Allow Users to Save Data.
APPENDIX A: ACTIONSCRIPT CLASS REFERENCE.
APPENDIX B: ACTIONSCRIPT OPERATORS REFERENCE.
APPENDIX C: SUPPORTED HTML TAGS.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-09/segments/1518891814300.52/warc/CC-MAIN-20180222235935-20180223015935-00530.warc.gz
|
CC-MAIN-2018-09
| 5,586
| 148
|
https://academicexperts.org/conf/site/2012/papers/35575/
|
code
|
Instructional Technology Modeling by Mathematics Professors in Teaching Secondary Mathematics Pre-service Teachers: A Case Study
Thursday, March 8 4:30 PM-5:00 PM Location: Capitol F
Presider: Henry Gillow-Wiles, Southern Oregon University, United States
Abstract: The purpose of this case study was to examine the modeling of technology by mathematics professors in two universities in teaching required courses for secondary level pre-service mathematics teachers. Six professors participated in this case study. Their responses were documented in pre- and post-interviews and data were gathered from observations in the classes and course syllabi. To discover the modeling of technology in the professors’ own practices, two research questions were studied. The findings suggest that mathematics’ teaching philosophy did impact technology use, and how it’s modeled in teaching required mathematics courses for secondary level pre-service mathematics teachers. Four of the mathematics professors modeled the use of technology in accomplishing tedious calculation and demonstrating mathematics concepts. Two other participants modeled technology tools use beyond the use of doing calculation and demonstrating mathematics concepts.
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-24/segments/1590347396163.18/warc/CC-MAIN-20200527204212-20200527234212-00122.warc.gz
|
CC-MAIN-2020-24
| 1,238
| 4
|
https://workplace.stackexchange.com/questions/34449/should-i-apply-to-other-companies-to-raise-my-salary-college-student-internshi/34455
|
code
|
I'm a college student in an engineering field. Last year I applied for and received a co-op at a small but well-known company in my city. It is organized through my university, and we have an informal agreement (no written contract) for me to work three terms at this company. A term is either a semester or a summer break.
I've since worked one term, a semester during which I took no classes and worked 40 hours/week for the company. I really like the company a lot. My coworkers are very nice and helpful, and I'm contributing to real-world projects.
The pay is good, but I regularly hear of other students in the same field earning 15 - 20% more. In fact, working for my university on small projects and research, I'm earning ~30% more, although the work is 8-10 hours/week as opposed to 40 hours/week.
My hourly pay for the first term was agreed upon in the initial job offer. But I've heard from other students at the same company that the pay does not increase in the following terms.
My question is, given the company's history of maintaining the same hourly rate, what is an appropriate way for me to ask the company for a raise? I am consistently working in the field and improving my skills even while taking a full course load, and I believe because of my proven track record with the company and other working experience I deserve to earn as much as other students working in the same field.
One thing I've heard of other students doing is pursuing offers from other companies and then using those offers as leverage to raise their pay with their current company. I have a couple places where I could apply and have a good chance to earn more. But I don't want to "lead on" other employers, and I really would like to stay with this company. It's exactly the type of work I want to be doing, I don't have to relocate, and the people there are awesome.
Any advice out there from students or employers who deal with college students on internships/co-ops?
Edit: summary: If I want a raise from my current company and want to stay at the company, is it better to a) pursue an offer from another company and present the current company the offer for the current company to counter or b) simply ask for a raise, giving my contributions and experience as grounds for a raise.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817729.87/warc/CC-MAIN-20240421071342-20240421101342-00019.warc.gz
|
CC-MAIN-2024-18
| 2,282
| 8
|
http://programming-assignment-he61603.affiliatblogger.com/8456589/the-smart-trick-of-programming-homework-help-that-no-one-is-discussing
|
code
|
The term Laptop language is sometimes employed interchangeably with programming language. Having said that, the utilization of each terms differs amongst authors, such as the exact scope of each and every. One use describes programming languages as being a subset of Computer system languages.
You have got just been appointed as being the financial advisor for Lisavia. Focus on 3 financial procedures you might suggest the President to pursue in order for his state to achieve this greater standard of residing.
Undecided regarding the slide images or texts or equal amounts of both equally - south african project or overseas.....hmmmmm selections selections
Syntax highlighting is often used to assist programmers in recognizing factors of resource code. The language over is Python.
We have tailored tutors who know their topics inside of out. They are really distinct with their fundamentals as well as their methods to The best of issues will amaze you. Be it situation reports, practical challenges or theoretical issues, we at Assignment Help Tutors have all your solutions.
..well if you live in SA...or else use the title of your own personal region...finest to find a project in the area you reside Real truth be instructed...Moreover the MS Office assignments....this a person was one among the better ones to try and do in comparison to all another earlier types....
AHT assignment Industry experts can offer you probably the most delightfully introduced operations management homework assignment Answer so you can get very best quality evaluations inside your supplied homework assignment and stay in front of your rivals.
A single important craze in language design for programming substantial-scale systems over the eighties was an elevated deal with the use of modules or click here now substantial-scale organizational models of code.
Proprietary programming languages are generally domain distinct languages or inner scripting languages for one item; some proprietary languages are made use of only internally inside a vendor, while others can be found to external people.
A person centralized technique that normally takes in every one of the requests and grievances and processes them once in a while is the necessity with the hour.
You feel restless and pondering continuously how Is that this probable for somebody university student to accomplish very well in all the subjects, while you're having difficulties tough in completing the assignment of just one issue.
In Japan and in other places, huge sums have been put in investigating so-termed "fifth technology" languages that integrated logic programming constructs.[forty one] The purposeful languages Group moved to standardize ML and Lisp. Rather then inventing new paradigms, every one of these actions elaborated upon the Concepts invented inside the former a long time.
In order to bypass this downside, numerous languages have kind loopholes, ordinarily unchecked casts That could be used by the programmer to explicitly make it possible for a Ordinarily disallowed operation amongst different types. In the majority of typed languages, the type technique is applied only to kind Check out courses, but several languages, commonly functional types, infer forms, relieving the programmer from the necessity to generate type annotations. The official design and style and research of type techniques is referred to as sort theory.
We know that everybody demands a helping hand once in a while, and requesting help after you will need it is necessary and demanding for long run achievement.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-43/segments/1539583510893.26/warc/CC-MAIN-20181016221847-20181017003347-00201.warc.gz
|
CC-MAIN-2018-43
| 3,573
| 14
|
http://stackoverflow.com/questions/3112516/is-ado-net-entity-framework-with-asp-net-mvc-v2-a-viable-option-when-writing-c/3113071
|
code
|
I've just finished going through the MvcMusicStore tutorial found here. It's an excellent tutorial with working source code. One of my favorite MVC v2 tutorials so far.
That tutorial is my first introduction to using ADO.NET Entity Framework and I must admit that most of it was really quick and straight-forward. However, I am worried about maintainability. How customizable is this framework when the customer requests additional features to their site that require new fields, tables and relationships?
I am very concerned about not being able to efficiently execute customer's change orders because the Entity models are basically drag-and-drop, computer generated code. My experience with code generators is not good. What if something goes haywire in the guts of the model and I'm unable to put humpty-dumpty back together?
In the long run, I wonder if using hand typed models which human-beings can read and edit is a more efficient course than using Entity Framework.
Has anyone worked enough with entity framework to say that they are comfortable using it in a very fluid development environment?
|
s3://commoncrawl/crawl-data/CC-MAIN-2016-07/segments/1454701169261.41/warc/CC-MAIN-20160205193929-00008-ip-10-236-182-209.ec2.internal.warc.gz
|
CC-MAIN-2016-07
| 1,105
| 5
|
https://www.odesk.com/o/jobs/browse/c/web-development/sc/website-qa/st/2/
|
code
|
Less than 1 month –
Less than 10 hrs/week –
Thanks for looking at this description and considering to help me out.
Since my wine importing hobby is growing into a business I am looking for structural improvements on my site.
I have had initial support for setting up the site two years ago, due to personal matters this is ended. Therefor I am looking for long term support for Magento Web development/Maintenance.
For starters the following topics needs to be addressed.
Hopefully you are interested and the first ...
|
s3://commoncrawl/crawl-data/CC-MAIN-2014-10/segments/1394023864559/warc/CC-MAIN-20140305125104-00025-ip-10-183-142-35.ec2.internal.warc.gz
|
CC-MAIN-2014-10
| 522
| 7
|
https://linen.growthbook.io/t/34172/hey-guys-for-the-mixpanel-data-source-would-it-be-possible-t
|
code
|
Hey guys, for the Mixpanel data source, would it be possible to also apply the User Dimensions to user profile properties, not only event properties? Right now to use the user dimensions it has to be a property of an event the user triggers, but some stuff like e.g. their current subscription status we don’t include on every event, but rather as a user profile property.
04/12/2022, 6:04 PM
I believe that's theoretically possible for us to support. Mixpanel lets you join events to user profiles when querying their API.
04/12/2022, 6:17 PM
How realistic would this be to set up? Otherwise I’ll start looking into the super properties or something
04/12/2022, 6:19 PM
I think realistically, probably a week or two to implement on our side
04/13/2022, 5:52 PM
Could you let me know soon whether its something you will add to the backlog or not, just so I know if we should expect it or to look at other options?
04/14/2022, 6:36 PM
We have a few other high priority projects queued up right now so can't give a super accurate estimate on when we'd be able to start working on this. I'm thinking at least a couple weeks until we could start.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-40/segments/1695233510412.43/warc/CC-MAIN-20230928130936-20230928160936-00354.warc.gz
|
CC-MAIN-2023-40
| 1,146
| 11
|
https://community.spiceworks.com/topic/1507068-hp-surestore-x1400-system-disk-almost-full
|
code
|
We have a HP NAS running built-in Windows Storage Server 2008.
The System disk is almost full, near it's capacity of 40GB.
1. OS not updated
2. All temporary files deleted
Two Data partitions working normal, with 170GB free each.
Don't know why this happened and what to do, rather then remove pagefile.
This is just a file server for sharing temporary CAD files, to store network scanners folders, etc...
Not sure if the OS upgrade is free, once it is an OEM Storage server license.
EDIT: Didn't read your post correctly. I don't wan't to upgrade de OS HDD. Till a few days ago there was enough free space to keep it running ok.
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-39/segments/1631780057913.34/warc/CC-MAIN-20210926175051-20210926205051-00685.warc.gz
|
CC-MAIN-2021-39
| 629
| 9
|
https://es.coursera.org/learn/python-data-analysis/reviews?page=225
|
code
|
9 de may. de 2020
The course had helped in understanding the concepts of NumPy and pandas. The assignments were so helpful to apply these concepts which provide an in-depth understanding of the Numpy as well as pandans
28 de sep. de 2021
This is the practical course.There is some concepts and assignments like: pandas, data-frame, merge and time. The asg 3 and asg4 are difficult but I think that it's very useful and improve my ability.
por John M H•
16 de jun. de 2019
Might as well just list the assignments, and skip the videos. I don't really feel the videos provide any useful introduction or helpful information about how to solve the assignments, it's basically up to me googling and reading documentation. Very disappointed.
por Mark M•
10 de ene. de 2022
The lack of explicit and clear instructions for the assignments make this course far more difficult than it really has to be. It's like taking an exam with trick questions that are vague and ambiguous. Stay away from this course, it's a joke!
por Kongpyung M•
5 de nov. de 2018
there was a technical problem on submitting the assignment, which I can not proceed on further week's lectures without completing the submission. I sent message and report the problem but nothing has solved even after 10 days.
por Roland H•
25 de may. de 2020
Wort course ever. Videos give only sneak previews and don't provide required information for the assignments. If I have to search for the all relevant information in the internet, then I don't need a video course at all.
por Aditya A•
19 de may. de 2020
The course is not very helpful nor does it cover any of the pandas functionalities in depth. Furthermore, it also uses an older version of pandas leading to what little that was being taught to be even more redundant.
15 de jul. de 2020
The material in the videos is very light. The course does not teach pandas but gives you a small introduction and leave you with the assignment. If I have to search for every thing what is the purpose of the course?
por Adam S•
14 de ago. de 2020
The level of lectures is unacceptable. Everything is strictly read from paper to the camera. All of the skills I've got were thanks to my own online research, as the explanaition of the lecturer was horrible.
por Nikhil T•
16 de may. de 2020
Worst course I strongly recommend not going through course. Here the code is executed and he tells briefly and the assignments are the things which come in ahead topics. Not to mention the grader has issues.
por SANYAM J•
14 de may. de 2020
Why didn't you taught the stuff you meant to give in the assessments, if one had to learn independently you could've provided with assignments only. Also too much rush during the programming tutorial.
por Sharad B•
22 de jul. de 2019
I am spending more time to deal with auto grader issues than learn something. This is so frustrating despite having good course contents. Frustrating and waste of my time and effort and money.
por Jhair A•
20 de abr. de 2021
This the worst course that I have ever seen. The instructors do not teach anything. I have experience with Python programming and I dropped the course at the first week. Its a waste of time.
por BO F•
1 de feb. de 2021
Very awful experience!
Compared with python 3 programming specialization, this first course's assignment is too difficult for student to handle, and less practices to handle these knowledges.
por Hossam A•
1 de may. de 2022
This is the worst experience ever
The instructor is speaking too fast in a monotunic, and the code he's writing is in too fast pace without caring to give the learner the time to follow up
por Dulain T G•
30 de may. de 2020
The instructor is the embodiment of monotony - adding to that, his lecutres are lacklustre, uninformative, and the student has to live and breathe on stack overflow for every assignment.
por Vasil D•
7 de dic. de 2016
Lessons were ok but the assignments were really frustrating, not because of the questions itself but because the questions were organised badly or were really vague and confusing.
por SHARLIN S•
3 de mar. de 2022
Horrible experience with the course. The instructor just reads out from a script and the speed is horrible. The assignments are so hard, and its not even taught in the course.
por Suvansh B•
31 de may. de 2019
Not much practice work, one will easily forget the concepts. The mentor speaks and types too fast, most of the time you will lag behind. Its like someone is reading a book.
por Shahriar R D•
6 de may. de 2020
The course contents are great but the instructors are not. I struggled a lot and had to watch a lot of tutorials from other places and finally I learned the contents.
por Henrique R•
7 de sep. de 2020
Explanations are superficial, and it relies too heavily on self-learning. For that I can simply check Python's documentation without paying the course's monthly fee.
por Miryam E•
22 de jul. de 2020
There is no helpful guide to the tasks, you don't know the results in advance so you don't know if you are doing well or not.
Tedious and you don't learn anything.
por Caleb J•
16 de feb. de 2022
way too fast. A 30 minute session takes over an hour to understand as the lecturer just flies through it and the assignmentss and quizess are way too difficult.
17 de ago. de 2021
Course material was presented pretty simply without examples that related to the programming assignments. Didn't provide me with the tools I wanted it to.
por Will W•
24 de abr. de 2021
This course has many errors and bugs in its materials. I don't know why the administrators refuse to fix it but it comes off as shoddy and poorly managed.
por Victoria S•
3 de may. de 2020
the lectures are not helpful at all, assignments were organised poorly - there impossible to see mistakes, in other words- go break your head over it
por ILLIA S•
25 de mar. de 2021
Corrupted or outdated data in week 3 and week 4. Hidden tests that fail and you can't get the reason...
Besides of that - the material given is good
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-27/segments/1656103271864.14/warc/CC-MAIN-20220626192142-20220626222142-00226.warc.gz
|
CC-MAIN-2022-27
| 6,028
| 81
|
https://gamerspawn.tv/
|
code
|
Our new website is coming soon.
BIBI - Eve (Stellar Blade Music Video)
Music video by BIBI performing Eve.
Promoting video games and the people who bring them to life.
GamerSpawn was founded in 2008 with the objective to share marketing and original content of video games.
In the years that followed, we also had the opportunity to create videos together with great people and organizations. Right now, we are focused on enhancing videos, covering new and old games.
We like to help people reach new audiences and provide content in higher quality.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817780.88/warc/CC-MAIN-20240421132819-20240421162819-00106.warc.gz
|
CC-MAIN-2024-18
| 549
| 7
|
https://meta.stackoverflow.com/users/289135/chris-thornton
|
code
|
Creator of ClipMate, the original clipboard extender for Windows. Shareware Industry Hall of Fame.
Member for 11 years, 3 months
3 profile views
Last seen Aug 12 '19 at 23:55
Top network posts
- 66 How do I create a new branch?
- 48 Is there an encrypted version control system?
- 33 Create time out scenario in SOAPUI
- 26 How to search SVN repository for a file when I'm not sure where I put it?
- 18 How do I backup and restore the system clipboard in C#?
- 17 Why is writing to the clipboard in JS considered a security hole?
- 12 How to deal with files that are relevant to version control, but that frequently change in irrelevant ways?
- View more network posts →
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-25/segments/1623488559139.95/warc/CC-MAIN-20210624202437-20210624232437-00527.warc.gz
|
CC-MAIN-2021-25
| 672
| 13
|
https://us.pycon.org/2013/schedule/presentation/179/
|
code
|
In this poster we present a system for unobtrusive software analysis using IntoVirt. IntroVirt is an introspective hypervisor architecture that supports advanced analysis techniques to include complete guest monitoring and interaction, as well as manipulation and blocking of system calls. The IntroVirt stack is written in C++, but has recently been extended to include Python bindings.
The objective of IntroVirt is to provide an introspective hypervisor architecture and infrastructure to support advanced analysis techniques and introspective capability development. The Xen hypervisor provides virtualization of hardware resources to run multiple distinct guest computer systems. By residing architecturally below the target system, an introspective hypervisor can monitor or control a guest virtual machine without direct modification, cooperation, or detection. To date over 17 proof-of-concept tools have been developed that range from analysis of Windows system calls, registry access, network activity, ioctl communications, and open file handles. The IntroVirt framework can be used to overcome challenges in the applications areas of dynamic forensics, reverse engineering, malware analysis, and guest protection.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-47/segments/1542039745281.79/warc/CC-MAIN-20181119043725-20181119065725-00360.warc.gz
|
CC-MAIN-2018-47
| 1,225
| 2
|
https://www.my.freelancer.com/job-search/website-design-developer/
|
code
|
halo, saya mengundang Anda untuk berpartner dengan kami di UNIXON untuk : 1. Mobile App Developer 2. Website Designer 3. Wordpress Developer 4. 2D designer 5. 3D designer 6. Packaging 7. Video Animasi Flat Design add dan chat portofolio terbaik Anda ke LINE @unixon pakai "@" kami akan mencarikan client untuk Anda. terima kasih.
Kami memerlukan developer untuk mengerjakan backend website dengan .net Design dan HTML/CSS sudah siap untuk di implementasikan. Deadline project adalah end of this month (Nov 2014) Jenis wesbite adalah company profile, backend/CMS yang di perlukan hanya untuk update content website berupa gambar dan text.
Kami butuh segera web developer untuk membuat website company profile dengan design parallax, responsive design, HTML5 (untuk video) dengan beberapa animasi [login to view URL] sudah ada, yang dibutuhkan adalah membuat design tersebut menjadi website. Referensi untuk website: [login to view URL] Jadi ketika klik suatu link, muncul page berikutn...
Don't bid you are not a real chinese developer and you have not any experiences of Wechat Mini app development. I will remove them and report to Freelancer team. Also, I will ignore auto bidding too. I want to start this project on today. Please consider job description. We would like to invite you to submit a proposal to develop a WeChat mini program
I need a new website. I need you to design and build a website for my small business. developer must have larawal coding knowledge... go through my sample prototype [login to view URL] you will be provided with Whiteboard application for video audio calling and writing with recording extension of online teaching
UI design and integration for a real estate website. These enhancements are on forms, fonts and usage of some icons on the site. Developer/Designed need to start this job asap and need to be completed within 3 working days.
Need a front end and back end developer for a website. Design is made and will be provided. Only developing is required
...to make our website more attractive and powerful, we want someone to build our website from scratch you can use complete coding or WordPress our company is comfortable with both, We will give the project who will quote us as low amount as possible, (As per our company policy). Our current website is : [login to view URL] Reference website is : wtca
...existing Wordpress website to be 100% responsive. 3rd developer on here and still experiencing issues. - Designed with the OceanWP theme - Editor used is Elementor - Needs to be 100% responsive, not only on smartphones and tablets, but there are issues with the site automatically resizing on different screen resolutions. - Design issues should be fixed
The companies website "[login to view URL]" should be completely redesigned and re-build in wordpress. The new website should become a professional look. Further, the content of [login to view URL] should be migrated completely to the new website. As we are no experts in website design we are interested in a long-term partnership
...a brand-new product that is designed to take the business to the next level What is expected from you within this project: 1. Everything you would expect a well-designed website: UX work, user flows, UI work, wireframing, prototyping, good branding/icons, and anything else we can formally agree on before the project starts. This is for all pages on
one of our client looking for a website made with bootstrap v4 latest version Things needed 100% responsive down to every mobile device Spam protection for the Contact us page this is a sample design , client openning a Bridal shop for local community so its not going to be online shop, so it is more about advertising the business and get online
Hello. My current website is on Wordpress & i require a WordPress developer for a unique & creative design. Please Contact only if you are an experienced developer With A Creative Mind.
We need a website for our Pharmacy, we need someone web designer to work with us to design very nice web layout design and developer it to make live. We need very attractive website which includes shopping cart within it. Please show some of your past projects have been done related to shopping cart.
Looking for an experienced full stack developer that fully understands Django/Python, PostgreSQL, and Reactjs. You will be responsible for both frontend development (reactjs) and backend (django). The site is similar to airbnb in functionality with our own custom design, which has it's own design and control panels. We want all aspects of the site to
I am a website development and services provider. I have semi-retired and am looking for someone to take the place of my lead developer, of 10 years, who has stayed on with my partner. I am going to continue supporting a handful of existing customers. There will be occasional new sites and a little maintenance here and there, both to my sites and my
Looking for a developer for website + App We are looking for a website and app developer to help us build an app for money transfer such as western union or other transfer plateform. [login to view URL] It is really important to get someone or company with experience and track records
...for a website and app developer to help us build what we call the “Treasure Vault”. The Treasure Vault is an online platform (website + smartphone app) which aims to help our creators share and find curated content. It is kind of the crosspoint between a blog, pinterest, and wikipedia. FREELANCER REQUIREMENTS : - Be able to develop a website and
Looking for help customizing my "Product Page Template" for my store. See attached image for details
Please create a mobile app PSD file / Sketch file to provide to my developer. The app will have a very clean and crisp minimalist look with a calm but lively color scheme. Attached is the wire frame. There will be two more screens to add. And there will be 3-5 splash screens leveraging images that we will provide. + The app should have a feel like
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-34/segments/1534221211933.43/warc/CC-MAIN-20180817065045-20180817085045-00345.warc.gz
|
CC-MAIN-2018-34
| 6,030
| 20
|
https://github.com/kidoman/ruby-haml.tmbundle
|
code
|
This bundle originated as a port of the official Ruby Haml.tmbundle.
Since a co-worker and I noticed that the plugin was mostly stagnant, we decided to try and update it to become slightly more
useful. I hope that you find this helpful in your day to day Haml workflow. Please let me know how you like it and contribute
if you can!
Also, once you pull the bundle down from Github… I have added an ‘Update Bundle’ menu selection. No need to go back to the
command line for updates.
- cd ~/Library/Application\ Support/TextMate/Bundles/
- git clone git://github.com/mattpolito/ruby-haml.tmbundle.git Ruby-Haml.tmbundle
|
s3://commoncrawl/crawl-data/CC-MAIN-2017-47/segments/1510934804019.50/warc/CC-MAIN-20171117223659-20171118003659-00581.warc.gz
|
CC-MAIN-2017-47
| 622
| 8
|
https://support.bitkub.com/hc/en-us/articles/360029342412-Who-controls-the-Bitcoin-network-
|
code
|
All the users in the world control Bitcoin. Developers are unable to force a change in the Bitcoin protocol; however, they can improve the software. Various versions of softwares are free for customers to use, which gives incentive to developers to create new and improved software that can attract users. All software based users follow the same transaction guidelines allowing the system to work in harmony, and ensuring that it runs as effectively as possible. Hence, these guidelines are upheld by every single users and developers in an effort to ensure system stability.
Interested to buy Bitcoin? Check the Market Now https://www.bitkub.com/market/BTC
For questions and inquiries, please feel free to contact us.
Telephone +66 2-032-9555
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-49/segments/1669446710662.60/warc/CC-MAIN-20221128203656-20221128233656-00182.warc.gz
|
CC-MAIN-2022-49
| 744
| 4
|
http://creepypasta.wikia.com/wiki/File:Jvk1166z.esp_(Creepypasta)_(TheNoLeafGamer)
|
code
|
This weeks Creepypasta is "Jvk1166z.esp" by RetardoTheMagnificent.
If you like our Creepypasta readings, remember to tune in next Sunday for another Creepypasta reading. If you want to suggest a Creepypasta for us to read on our show, you can do so via the comments section, or via our Facebook or Twitter.
I hope you enjoy my reading, it's best enjoyed with headphones.
Links for mobile users:
Subscribe: http://www.youtube.com/subscription_center?add_user=projectmygame Facebook: http://www.facebook.com/ProjectMyGame (Managed by Caibra) Twitter: http://www.twitter.com/ProjectMyGame (Managed by TheNoLeafGamer) Previous video: https://www.youtube.com/watch?v=ne1Iur1YZsc (Let's Play Crash Bandicoot (Part 3) (TheNoLeafGamer)) Next video: https://www.youtube.com/watch?v=5P9_Ktukm6U&feature=youtu.be (Let's Play Power Rangers The Movie Co-op Stage 4/6 (Semi-blind run) (TheNoLeafGamer) (Caibra)) Creepypasta playlist: http://www.youtube.com/playlist?list=PLJRQx_qnpa2HSVlO8KHImQHvWOekxepgw
Information that concerns the relevant licenses and the usage of other material (covered by exception of statute) is accessible via our Google Docs page via:
Additionally licensed material used in this video:
Jvk1166z.esp, RetardoTheMagnificent (http://creepypasta.wikia.com/wiki/Jvk1166z.esp) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ http://creepypasta.wikia.com/wiki/Creepypasta_Wiki:Licensing
Morrowind.Jpg, RetardoTheMagnificent (http://creepypasta.wikia.com/wiki/File:Morrowind.jpg) Due to omitted license information, the work is presumed to have no known use restrictions.
The Test Card, grahamwell (http://www.flickr.com/photos/grahamwell/133745572/sizes/o/) Licensed under Creative Commons: By Attribution 2.0 http://creativecommons.org/licenses/by/2.0/
Censor Beep 10, SoundJay.com (http://www.soundjay.com/censor-beep-sound-effect.html) Licensed under the terms of service set out via: http://www.soundjay.com/tos.html
Spacial Harvest, Kevin Macleod (http://incompetech.com/music/royalty-free/?keywords=Spacial Harvest) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
All other content contained within this video was created by and is intellectual property of 'TheNoLeafGamer'. No license is offered of this content without approved request. This does not in any form restrict any works used under 'Creative Commons'.
Content used in this video that is covered by The Digital Millenium Copyright Act of 1998, Copyright Designs and Patents Act 1988 and EU Directive 2001/29/EC:
|
s3://commoncrawl/crawl-data/CC-MAIN-2017-34/segments/1502886124563.93/warc/CC-MAIN-20170823210143-20170823230143-00148.warc.gz
|
CC-MAIN-2017-34
| 2,583
| 14
|
https://www.resumonk.com/blog/setup-ssl-certificate-heroku/
|
code
|
We recently setup SSL on Resumonk.com which is a Rails 3 application running on Heroku. Here is a quick summary of the entire process and hope it saves you some time when you are looking to enable SSL for your Rails application on Heroku.
What is SSL and why do you need it?
SSL or Secure Sockets Layer is protocol for establishing a secure (encrypted) link between server and the browser. If your app or website is using a database for storing and retrieving user generated information, you need to get SSL to ensure that the data is transmitted securely and to ensure that it is less vulnerable to tampering or forgery.
Also, displaying SSL Seal helps improve trust and it tells your customers that their data is protected.
Adding SSL certificate to your Heroku application
To use SSL for an app hosted on Heroku, you’ll need to enable SSL add-on that Heroku provides. This add-on costs $20/month. Please keep in mind that this is a recurring expense and it does not include the cost of the SSL certificate itself. You’ll need to buy that separately.
Note: If you don’t plan to use a custom domain then you can use the free SSL that Heroku provides – (https://myapp.herokuapp.com).
Here are the steps that you need to follow to add an SSL certificate to you app –
- Purchase SSL certificate
- Generate private key and CSR
- Provision the Heroku SSL add-on
- Upload the key and certificate to Heroku
- Update your DNS settings
- Update your app code to redirect https instead of http
STEP 1: Purchase SSL certificate
We bought a RapidSSL certificate from Namecheap.
Note: RapidSSL certificate ($10/year) is only valid for the root domain. If you need to secure all your subdomains (blog.domain.com or labs.domain.com), you’ll need to buy a wildcard SSL certificate.
STEP 2: Generate Private key and CSR
Before you can activate your SSL certificate, you’ll need to provide a CSR (Certificate Signing Request) to the SSL provider.
The first step to generating a CSR is to create a private key. You can use openssl for generating a private key.
On a Mac (install Homebrew first if you don’t have it installed), open up Terminal.app and use the following command.
brew install openssl
On Ubuntu, you can do –
sudo apt-get install openssl
Once you’ve installed openssl, use this command to generate a private key –
openssl genrsa -des3 -out server.pass.key 2048
You’ll be asked to enter a password.
Enter pass phrase for server.pass.key: Verifying - Enter pass phrase for server.pass.key:
Then run this command –
openssl rsa -in server.pass.key -out server.key
The above command will create a file called server.key in your working directory. We’ll need this key to generate the CSR.
openssl req -nodes -new -key server.key -out server.csr
This is the command that will generate a CSR for you. You’ll be prompted to enter the following details –
- Country Name: 2 Digit code. This link has a list of all accepted country codes – http://www.ssl.com/csrs/country_codes
- State and Locality (e.g.: California, New Delhi etc)
- Organization name (Legal/Registered Name of your company e.g.: Abhayam Software Solutions Pvt. Ltd)
- Organizational Unit is whichever branch of your company is ordering the certificate (e.g. Marketing Department, Product Development, Software Lab)
- Common Name – This is the most important part so be extra careful. Common Name is the domain name that you want the CSR (and the SSL certificate) for. Please note that you need to specify which URL you want – www or non-www. You cannot set the common name to example.com and expect it to secure www.example.com.
For Resumonk, our main URL has www in it and the root url (non-www) redirects to the www url, So the common name we specified was www.resumonk.com
The previous command would have generated a file name server.csr. Open up that file in a text editor and copy everything inside the BEGIN/END block.
NOTE: The following step is only applicable for Namecheap and may vary for other SSL providers.
Login to your Namecheap account (or any other SSL provider) and navigate to your SSL dashboard – Your Account -> Manage SSL Certificates and click the “Activate” link next to your SSL certificate.
Paste the CSR code that you copied into the text box and fill in the rest of your details. For server name, choose Apache 2.
Important Note: You will have to choose an approver email from the list that is shown. You’ll have options like [email protected], [email protected], [email protected] etc. If you don’t have any of these email addresses created, you’ll need to do that before proceeding since Namecheap will send our a verification email to the approver email address.
Once you save all the details, you’ll receive a verification email from Namecheap (to the approver email that you specified earlier) asking you to verify that you want to active the SSL certificate.
After you verify, Namecheap will send you an email with 2 certificates – WEB SERVER CERTIFICATE and INTERMEDIATE CA. Copy both these certificates one after the other into a separate file and save it as server.crt.
Important Note: INCLUDE the BEGIN CERTIFICATE/END CERTIFICATE lines and ensure that there are 5 dashes to either side of BEGIN CERTIFICATE and END CERTIFICATE. Do not add any extra whitespaces or line breaks.
The final file should look something like this –
STEP 3: Provision the Heroku add-on
Now you need to provision Heroku’s add-on. Open up your terminal and cd to your project directory. Then give this command –
heroku addons:add ssl:endpoint
STEP 4: Upload the key and certificate to Heroku
Now add the certificate and private key to Heroku
heroku certs:add server.crt server.key
Here the server.crt file is the certificate we created in the last step and server.key is the private key we generated in Step 1.
If everything worked as it should, you’ll see a screen like
Adding SSL Endpoint to example... done example now served by fuscia-1212.herokussl.com.
This is the new endpoint URL at which your domain should point.
STEP 5: Update your DNS settings
Login to your domain management panel.
If you already have a CNAME record pointing to myapp.heroku.com, change it to the new URL endpoint (fuscia-1212.herokussl.com).
If you don’t have a CNAME record, you’ll need to add your custom domain to Heroku first. To do that, follow this guide.
Now once the DNS change has propagated (this can take a while), you’ll have SSL activated on your website. Navigate to https://mydomain.com and you’ll see that the address bar turns green and shows a lock symbol.
Additional Step for Rails apps –
STEP 6: Tell Rails to use the https URL.
You’ll notice that right now, although you have got your SSL certificate to work, you can still access your app without SSL (http://mydomain.com). You need to tell Rails to use the SSL version by default.
Doing this is really easy, open up production.rb file and add this line –
config.force_ssl = true
That’s it. Now if you try access your website without ssl (http://mydomain.com), Rails will do a 301 (permanent redirect) to the https version.
One final thing to keep in mind is that if you are using social sign-in (omniauth), you might need to change the callback URL (especially for Google+).
Also check your code for places where you have referenced the absolute URL and change it to https (This usually happens in transactional emails (welcome, password-reset etc) that you send out).
That’s all there is to adding a SSL certificate to your Heroku-hosted app. Let me know if you have any questions.
PS: Resumonk can help you create a beautiful and professional resume in minutes. Try it out and do let me know how we can improve it further.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-40/segments/1695233506528.3/warc/CC-MAIN-20230923194908-20230923224908-00856.warc.gz
|
CC-MAIN-2023-40
| 7,726
| 73
|
https://www.shecodes.io/react-add-on
|
code
|
Highly recommended by 130,000+ women
Employees from these organizations highly recommend SheCodes.
To this day, SheCodes workshops have taught over 130,000 women how to code. We provide a mix of live support, pre-recorded lessons, and homework to offer the highest quality online workshop possible. See what’s included in this SheCodes workshop by watching the video below!
Matt Delac is a software engineer with 10+ years of experience who has worked with companies such as
Originally from 🇫🇷 France, he started a company in 🇺🇸 Silicon Valley with funding from Y Combinator (#1 startup accelerator worldwide), has a Masters degree in computer engineering from 🇨🇦 Canada, worked as a full-stack engineer in 🇦🇺 Australia and has taught 130,000+ students how to code (online and offline) through SheCodes. His workshop rating average is 🌟 4.9/5.
He’s also the founder and engineer behind UpLabs, a successful design marketplace with over 2 million monthly visitors, mostly automated with code he wrote.
Erika Chan, SheCodes Alumni
“Matt is a great instructor - he explains concepts really clearly and simply for an absolute beginner like me! I really recommend this workshop to anyone who would like to get a headstart into programming.”
parisa kheyrollahi, SheCodes Alumni
“Matt is truly the best teacher I've ever had! never in a million years would I have thought that I could learn this much about coding by only attending the 3 weeks basic workshop!!! he explains everything so throughly and smoothly, that it's basically impossible for others to not understand it! I'am so happy and excited for the upcoming workshops, and I can't wait to have more fun with codes.”
Clarissa Ren, SheCodes Alumni
“Love this class! The way Matt explains it is so easy to understand and follow. I enjoyed actively practicing my new skills after each video, and very much enjoyed putting together my final project.”
Including access to lessons, challenges, documentation, and the exclusive course live chat support where you can ask for help and chat with other learners.
You will watch lesson videos and read through detailed documentation at your own convenience.
You will be able to ask questions on Slack as you complete each portion of the workshop.
Duration: 2-3 hours
2. Coding challenges
Each lesson has coding challenges you'll need to complete. While working on them, you will have access to technical support and once completed, you will have access to a suggested solution.
Unlike other courses, our workshops are much more focused on doing rather than just listening.
Duration: 3 hours
You will submit homework each week. There will be deadlines for homework to be submitted in order for you to move on to the next part of the workshop.
You can ask questions and get help from the instructors and other students on Slack.
Duration: 2 hours
Learning react with SheCodes - a new world of discoveries and possibilities.It was quite interesting journey in react world. And yes, React Add-on is full of useful information!
This project was the most fascinating one. Thanks so much for the enjoyable journey
This was a fun project to build. Learn useful tips on calling API and authentication.
Chat with instructors and other students. Ask questions and get help during the workshop. You can also use this Slack chat as a resource after completing the workshop.
Easily access all workshop materials and complete homework assignments in one place.
You will receive all of the necessary tools to set you up for success. We’ll provide you with all of the materials you need to prepare for your new coding workshop.
We update lesson videos whenever it's needed to be sure that our students can always access the most recent information.
Each lesson comes with detailed documentation and recommended resources.
Complete challenges throughout the workshop to reinforce your new coding knowledge.
Develop advanced final projects that can be added to a development portfolio. This will help you showcase your new coding skills to potential employers!
Join other students from the workshop in a project showcase - where you can share ideas, get feedback, and check out what other students in your class have built. This will be good practice for when you present your projects to future potential employers.
Get feedback for each homework assignment you complete so you can more easily track your progress throughout the workshop.
Receive feedback from an expert to make improvements to your final project.
If you have any other questions, reach out to us at [email protected]
Yes! This add-on builds on the knowledge of everything you learned in the React workshop: you will get more hands-on practice in React, as well as other professional tools familiar to developers like an API to build the project, GitHub to host your code and Bootstrap to create layouts.
Adding another hands-on project to your portfolio is never too much! This is a great way to showcase your coding skills to potential employers and show the knowledge you’ve built on from SheCodes React, using more advanced knowledge of React and other popular coding tools.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-06/segments/1674764494986.94/warc/CC-MAIN-20230127132641-20230127162641-00737.warc.gz
|
CC-MAIN-2023-06
| 5,166
| 39
|
https://www.infragistics.com/community/forums/f/ignite-ui-for-jquery/123697/igdatasource-filtering-customfunc-not-working
|
code
|
I am trying to filter my igGrid data based on a combination of nested AND and OR conditions. According to these old topics that is not supported by igGridFiltering:https://www.infragistics.com/community/forums/f/ignite-ui-for-jquery/86638/filtering-multiple-columnshttps://www.infragistics.com/community/forums/f/ignite-ui-for-jquery/76333/multiple-filters-on-single-column-and-boolean-logic
One of the proposed workarounds looks to be ideal, the customFunc setting on the datasource. Here it is in the latest documentation:
However, this function does not seem to work. Adding a console.log shows that it is not being called at all.
Any other suggestions on how to apply a complex filtering are also appreciated.Thanks
After investigating this further, I determined that your requirement could be achieved by using the customFunc of the datasource as suggested in one of the listed forum threads.
I have created a small sample implementing this approach. Multiple conditions for one column are set with the logical operator “OR” and conditions for multiple columns are set with “AND”.
Below I am attaching a sample demonstrating the described behavior. Please test it on your side and let me know if you need any further information regarding this matter.
Regards, Monika Kirkova, Infragistics
Your example wasn't exactly what I needed but it did point me in the right direction.I only needed the customFunc to work without any advanced filters. I hide the filter UI from my users to provide custom filter inputs.From your example I found out that the customFunc is only called when any filter is selected. Without a filter selected the grid displays directly what is in the original dataSource. I was able to force the customFunc to be executed every time by adding a dummy filter expression.jsfiddle.net/.../Thanks for the help!
I am glad that you were able to achieve your requirement.
Thank you for using Infragistics components.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296817382.50/warc/CC-MAIN-20240419074959-20240419104959-00865.warc.gz
|
CC-MAIN-2024-18
| 1,942
| 11
|
https://community.renesas.com/mcu-mpu/embedded-system-platform/f/forum/30211/problem-with-filex-with-usb-mass-storage
|
code
|
I tried to use FileX with USB mass storage, but when I try to initialize the Host USB Controller (with the USB key inserted) I get an error because the USB host controller did not find the USB device.
The flash drive is powered. Is there something wrong with the configuration?
The problem is in these lines of code:
/* Check the class container if it is for a USBX Host Mass Storage class. */
== _ux_utility_memory_compare (_ux_system_host_class_storage_name, host_class,
status = ux_system_host_storage_change_function (event, instance);
The ux_system_host_storage_change_function function is never called!
Hello Paolo!Thank you for your message and reaching through our Renesas Community. First, would like to confirm the hardware module/ part number that you are currently using. Would like also to know if you have ran through and check this document below:https://www.renesas.com/us/en/document/apn/usbx-host-class-mass-storage-module-guideHope this helps.
If this response, or one provided by another user, answers your question, please verify the answer. Thank you!
Renesas Engineering Community Moderatorhttps://community.renesas.com/https://academy.renesas.com/https://en-support.renesas.com/knowledgeBase/
I use S7G2 with SSP 2.4.0
I just read that document but I didn't find any errors.
Is it the code example or have you integrated this code into your own program?
If it's your own program, please try the sample code provided by Renesas and check if it works out of the box . https://www.renesas.com/us/en/document/scd/usbx-host-class-mass-storage-module-guide-rev105-sample-code?r=1054631
Also if it's your program, did you change any setting in the FileX/USBX stacks in the visual configurator? If yes, please provide the screenshots of the properties so I could try to reproduce your issue here.
By the way, is it a custom board or some development board like SK-S7G2 or DK-S7G2?
Your VBUSEN signal is not used. Normally this controls 5V supply to a attached usb device. What's your connection like?
I use a custom board. I didn't have a code example, I had integrated in to own program.
Now I use a signal analyzer.
I will keep you updated.
I do not use VBUSEN because the 5 V is always on.
I found that it is not a hardware problem if I remove all threads except the one that uses the USB mass controller detection works.
I have to remove these threads, if I disable them it still doesn't work and I don't understand why.
Do you have any ideas?
The type of your error and the result of your tests make me think that the problem is with the memory usage. Probably some of your threads use too much of RAM so the USBX and thread stacks overlap. Please check if you set enough stack and heap sizes, and if their overall size doesn't exceed the RAM volume.
The RAM is 99% because I use all free ram for heap (I changed the script file).
I tried increasing the main stack but it doesn't work.
How can I tell if there is an overlap between USBX and thread stack?
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-23/segments/1685224644571.22/warc/CC-MAIN-20230528214404-20230529004404-00185.warc.gz
|
CC-MAIN-2023-23
| 2,975
| 28
|
https://subscription.packtpub.com/book/web-development/9781787280038/6
|
code
|
Does your application work as intended? Are there any scenarios where your application behaves unexpectedly? To confidently answer these questions, we need to test our application. Now, we can manually test all our features and functionalities and try to unearth any bugs in our application, or we can write test cases in our application. Which approach is better?
In this chapter, we will focus on testing, and how writing test cases provides us with a better application than solely relying on manual testing. In this chapter, we will be covering the following topics:
- We will start by looking at what it means to be writing test cases in comparison to manual testing
- Then we will also talk about test-driven development, and how to go about implementing that in software development
- After these, we will start implementing our test cases in the Sample Trello...
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-50/segments/1700679100651.34/warc/CC-MAIN-20231207090036-20231207120036-00059.warc.gz
|
CC-MAIN-2023-50
| 870
| 5
|
https://blog.seattlepi.com/microsoft/2010/01/29/bing-gets-all-up-in-finance-mars/
|
code
|
Last week, it was recipes. This week, it’s finance. And Mars.
Microsoft Bing now has finance data integrated with its search results. Type a ticker symbol (i.e. MSFT) into the basic Bing search bar, and the search engine’s instant-answer feature will spit back some finance info.
Click on the heading or “Investor Data” on the left, however, and you’re taken to an in-depth page for that public company. The basics are there – current stock prices, daily data, analyst estimates, recent earnings – but honestly, I want an interactive stock chart like Yahoo has.
Meanwhile, the Bing team has partnered with the Pacific Science Center in Seattle to teach kids about Mars. And, it seems, teach kids to use Bing at the same time.
Microsoft’s “Captain Mike’s Mars Adventure” site was launched in conjunction with the “Facing Mars” exhibit opening Saturday at the Science Center. On the Web site, kids have to answer questions about Mars by searching on Bing. The goal is to tell Captain Mike enough about Mars so he can go on his space mission.
According to the site, Microsoft also hopes teachers will use the site as a class activity. I dunno, though … Captain Mike-rosoft is clearly trying to instill Bing brand loyalty, starting at a very early age. Responsible to do?
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-17/segments/1618038077336.28/warc/CC-MAIN-20210414064832-20210414094832-00590.warc.gz
|
CC-MAIN-2021-17
| 1,295
| 6
|
https://dinnerplatesets.name/set-of-91-rare-noritake-gainford-hand-painted-fine-china-japan-huge-lot.php
|
code
|
The casserole dish seems to have a decent size chip in it however it is hardly noticeable. I have take a picture of the chip. This casserole dish comes complete with the lid. All other pieces shown in the pictures are without blemish or damage.
There are 91 pieces in total. Please see picture that has sets made out by style and number of pieces.
Any and all questions are welcome.
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-18/segments/1712296816024.45/warc/CC-MAIN-20240412132154-20240412162154-00162.warc.gz
|
CC-MAIN-2024-18
| 382
| 3
|
https://schedule.sxsw.com/2017/events/OE06791
|
code
|
Official Hackathon Afterparty powered by Square
Square is hosting the official SXSW Hackathon afterparty. Come talk to members of our developer team, check out our APIs, and play some sweet 80s arcade games with complimentary snacks and drinks.
More info here: squareshackathonafterparty.splashthat.com/
Programming descriptions are generated by participants and do not necessarily reflect the opinions of SXSW.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-40/segments/1695233510319.87/warc/CC-MAIN-20230927171156-20230927201156-00832.warc.gz
|
CC-MAIN-2023-40
| 411
| 4
|
https://rdrr.io/github/mar-esther23/rgriffin/man/addGqueryTransition.html
|
code
|
Add a transition between two states to a Griffin query. The function takes a dataframe with the steady states where wach row corresponds to a steady state and each column corresponds to a node of the network The valid values are: 1: active 0: inactive *: non-determined
dataframe with valid states in order
query java query to run Griffin
1 2 3
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-49/segments/1669446711042.33/warc/CC-MAIN-20221205164659-20221205194659-00004.warc.gz
|
CC-MAIN-2022-49
| 461
| 6
|
http://goproblems.com/12533?psetid=16693367
|
code
|
No variations at all, yeah. I couldn't figure out what more to add or say though. Request if you'd like.
(;AW[dp]AW[cp]AW[gq]AB[iq]AB[op]AB[mp]AB[nq]AW[oq]AW[pq]AW[qp]AW[qn]LB[io:A]LB[kq:B]C[A or B?]AB[cn]AB[ck]AP[goproblems]
(;B[io]C[Yes! Good shape, not overconcentrated, and makes the group more influential.RIGHT])
(;B[kq]C[Too close together. The stones are too crowded to do all they can; they aren't efficient.]))
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-05/segments/1642320301737.47/warc/CC-MAIN-20220120100127-20220120130127-00015.warc.gz
|
CC-MAIN-2022-05
| 420
| 4
|
https://zh.digi.com/support/forum/59563/why-range-no-better-with-antenna-than-with-wire
|
code
|
I recently bought the kit with 3 * Xbee Pro S3Bs ( 00mhz). This kit also included the 2.1db antennaes.
Intially I had then set up using only the presoldered wires and got a 100 or so meters in LOS.
Subsequently I have solderded on some RPSMA connecters and attached the antennaes but the range has gone down instead or up.
I have verified the soldering and everything is clean with good joints..
I have no background in antennaes and must admit that my knowledge is quite basic, I have read many of the beginners articles in the web but nothing seems to be pointing me in the right direction as to why my range has gone down instead of up.
I have my XBees in API mode, they can connet without any problem, I can send and recieve data but just can't increase the range.
The 1st Xbee is placed at my garage door, and the others are connected to a portable PC.. ( All are connected to Arduinos, either Nano's or Megas.. ( no problem with the arduinos or the code). The antennaes are connected directly to the Xbees.
All are set to HighPower (4) and have the usual networking params.
Where and how should I begin looking, debugging in order to determine why the antennaes are not producing better range...
Thanks in advance for any advice that you can offer..
|
s3://commoncrawl/crawl-data/CC-MAIN-2022-49/segments/1669446710764.12/warc/CC-MAIN-20221130124353-20221130154353-00711.warc.gz
|
CC-MAIN-2022-49
| 1,255
| 10
|
https://www.fr.freelancer.com/projects/php-website-design/order-form-with-calculation-function/
|
code
|
I need a 2-pages order form with a calculation function. Please see below for more details. I hope some of you understand my description :-)
- On this page the client will make different choices (see below).
- The numbers, 1-5, represents the different choices that are availible for the client.
- [XXXXX] = text field or box with different choices.
- When clicking on the "Next button" the script will check domain availibility and also calculate price. What the price will be depends on what choices the client has made (which hosting plan, how long payment period etc.). The price will be presented on Page 2.
1/ Domain Name: [write domain]
- .com, .net, .org, .nu, .com, .cc, .ws, .se, .biz, .info, .cn, .tv, .bz
2/ Domain option: [Choose here]
- Register 1 year (different price depending on which domain that has been choosen above)
- Register 2 year (different price depending on which domain that has been choosen above)
- Transfer (only valid for .com, .net, .org, .info, .biz and always same price)
- Redirect (free for all domains)
- Will do myself (free for all domains)
3/ Hosting plan: [Choose here]
- Budget (specific price)
- Standard (specific price)
- Premium (specific price)
- Starter (specific price)
- Expert (specific price)
- Master (specific price)
- ONLY DOMAIN (no price)
4/ Payment period: [Choose here]
- 3 months (different prize depending on which hosting plan that has been choosen above)
- 6 months (different prize depending on which hosting plan that has been choosen above)
- 12 months (different prize depending on which hosting plan that has been choosen above) (the only option if choosen "ONLY DOMAIN" above)
5/ Invoice method: [Choose here]
- E-mail (specific price if choosen payment period 3 or 6 months, FREE if chosen 12 months)
- Snail mail (specific price)
---->> Next button [Check domain availibilty and calculate the total price. The price will be presented on next page]
On this page the price will be presented to the client. The client will also fill in contact details and invoice details. When clicking on the "Order button" a confirmation will be sent to the client and order details will be sent to us.
VAT (XX %): XXXX
Total Price (inc. VAT): XXX
Agree to TOS
etc etc etc.
-----> Order button [ Send order confirmation to client and order details to us]
24 freelance font une offre moyenne de $287 pour ce travail
We wish to introduce iNavigators as an Information Technology arm of Rungta Enterprises, a multimillion-dollar conglomerate that was conceived with a singular charter to provide quality software solutions and to cater Plus
Dear [login to view URL] got your idea. We can provide you EXACTLY WHAT YOU NEED!!! We have all the required skills to complete your project in the best way, so you can be abolutely sure, that you'll receive a top-quality resul Plus
Dear Sir! We are a team of high qualified and expirienced programmers and designers. We have reviewed Your project requirements and we are ready to start on Your project right now. Feel free to contact us 24x7. Kind Re Plus
Your explanation is quite clear and so will be my script ;-) Have done many similar things = no problem ..
We specialize in portal development, web services, 3D, Compositions , Application of tools See & Hear, Corporate videos , and Media Solutions. open a pmb for questions or suggestions Please check our portfolio at ht Plus
Hello There , We are capable of doing this project for you. We have done the various projects in asp and asp.net besides vb and PHP. We are sure of doing this within given time limit. For your kind consideration Plus
Hi - I would like to help you on your project. I have created these forms which do calculation both on the site and behind the scenes (on submit). Please let me know if you are interested. Thanks, Joe [login to view URL] Plus
Hello, I can do it without problem, including check domain availability because I have experience with hosting companies, so I very well know what you want.
The Web Artists as the name suggests is One of the leading Internet Presence Provider and Web Development company operating from IL, USA & India. We can undertake your given requirement with 100% satisfaction in the s Plus
WebChroma is one stop solution for e-Commerce, Intranet Application, Desktop Applications, Client/Server Applications, B2B , B2C, P2P, web application, web design, graphics & logo design for small to enterprise busines Plus
eights Systems([login to view URL]), based in Mumbai, India has been in the software development arena for over a decade now. We pride ourselves in our experience which we have gained by working across global organisat Plus
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-47/segments/1542039742937.37/warc/CC-MAIN-20181115203132-20181115225132-00083.warc.gz
|
CC-MAIN-2018-47
| 4,650
| 47
|
https://www.partsnotincluded.com/tag/programming/page/2/
|
code
|
Recently I’ve been playing around with building various alternative controller projects for games, typically using an Arduino-compatible microcontroller acting as an HID input device of some sort. The Arduino ecosystem makes it easy to set up these projects to act as either a Keyboard, a Mouse, a DirectInput Joystick, or a composite device that’s a combination of the above. Unfortunately back in 2005 DirectInput was supplanted by XInput with the release of the Xbox 360 controllers, and modern games have been weaning off of it ever since.
These days, many mainstream games barely support DirectInput at all. Games like Rocket League and Overwatch won’t even recognize a DirectInput joystick – you have to use XInput controller emulation software that can be tricky to set up and doesn’t work with every game.
Wouldn’t it be great if there was a simple, turnkey way to make your Arduino emulate an Xbox controller and work out of the box with these newer games?
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-39/segments/1631780053657.29/warc/CC-MAIN-20210916145123-20210916175123-00396.warc.gz
|
CC-MAIN-2021-39
| 977
| 3
|
https://fr.electrical-installation.org/frwiki/Utilisateur:Romain.R
|
code
|
My name is Romain RICARDO
My current residence is in Lyon, France
I have been working at Schneider Electric since 2012.
My background is :
- Technical publications writer / Technical Publications Leader for Variable Speed Drive product.
- Marketing operational (digital) for electrical distribution & Building
- Management and deployment of the Wiki Installation Electrique (French version)
- Launch Leader in South East Europe for the Masterpact MTZ circuit breaker product
My current position is Offer Manager for Universal Enclosures in France.
For more details about Me : linkedin page
Nota: do you know that Schneider Electric experts of this wiki are also sharing their expertise in Schneider Electric Power Management blog ?
|
s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474808.39/warc/CC-MAIN-20240229103115-20240229133115-00464.warc.gz
|
CC-MAIN-2024-10
| 731
| 11
|
https://github.com/brettbuddin/prize/blob/9e546e9fd82a6a261e752a66ecafde82502c2d0d/README.md
|
code
|
Uses Twitter's streaming API to listen for specific keywords for a contest. It also tracks retweets of a specified user's tweets that contain those same search terms. This allows users to enter the contest by tweeting with, say, a hashtag and or by retweeting the originating organization's tweets containing said hashtag.
User IDs are accumulated in Redis by date. The key used for each Redis Set looks like:
$ prize --config=~/path/to/file.config [debug]: Tracking keywords ['superawesomecontest'] [debug]: Following user ['271196899']
|
s3://commoncrawl/crawl-data/CC-MAIN-2015-48/segments/1448398445142.9/warc/CC-MAIN-20151124205405-00203-ip-10-71-132-137.ec2.internal.warc.gz
|
CC-MAIN-2015-48
| 537
| 3
|
https://neilparkhurst.com/2018/05/16/mb2-717-certification-microsoft-dynamics-for-sales-transactional-entities-line-items/
|
code
|
As I prepare for my Dynamics 365 certification in sales (MB2-717), I am creating blog posts based on my revision. I hope that collectively these posts may prove useful to anyone also preparing for the MB2-717 exam. This time I will cover the concepts around the lines item we find on transactional entities.
Sales order processing within Microsoft Dynamics 365 is designed to allow companies to create and track sales in a consistent and measurable manner. This is done by making use of opportunities and related transactional entities such as quote, order and invoice. In earlier posts I have already described the process of capturing leads and converting them into opportunities, plus I’ve covered the management of the product catalog. (Including price lists.) I am now going to build on that information by looking at how the sales related transactional records operate in more detail. Starting with how to add and amend products.
Addition of “items” to opportunities
Opportunities can contain a mixture of exiting products and write-in products. I haven’t mentioned write-in products previously; these are essentially free-typed items. Useful for one off / ad-hoc deals. I will cover write-in products in more detail later in this post.
Before adding any existing or write-in products to an opportunity we need to select a price list and then decide if the revenue should be User Defined or System Calculated.
When the revenue calculation is set to user provided the estimated revenue total shown on the opportunity will be manually entered. However if the revenue is system calculated the total “Opportunity Line Amount” will be shown in the estimated revenue field. (And the estimated revenue field would be read-only.)
Estimated revenue on an opportunity is often an important value as commonly this is the value reported in the sales pipeline.
As already mentioned write-in products are ones that are manually entered and don’t have to be added to the product catalog. Say you normally sell caravans, you’d have a price list for caravans and all the related camping equipment you routinely supply. But say a “left of field” opportunity arises when you can off load some old office furniture! You are unlikely to create a price list for this situation and therefore write-in products would come into play. Write-in products may also be routinely used by companies who don’t really have a defined set of products, maybe all of the deals are for custom / bespoke items. An antiques shop for example might mainly use write-in products as each item they have in stock is unique.
Whilst write-in products do not use a price list, you will still need to have selected a price list on the opportunity to be able to add them.
As products are added to the opportunity you can select their type, write-in or existing. If write-in is selected the first thing that will happen is you will be prompted to enter a description of the item. And then a unit price, quantity and discount. You should be aware that write-in products do not need a unit of measure, have no properties and cannot have related product suggestions.
You can see below that I have added the sale of two desks onto my opportunity. Notice that the icon on the left hand side is different for the write-in product. Also notice that the product name and pricing fields don’t have the lock symbol as they can be changed.
Write in products might also be useful for including negative values. For example, if you wanted to give an itemized discount value or credit to the order as a whole.
You have seen above that we could use a negative value on a write in product as an itemized discount. Plus we can enter a discount value per line item. You should however be aware that it is also possible o discount the total value by a value or percentage.
See below that I have applied a 10% discount to the total opportunity value.
Also notice that we can add a freight amount to the total that is not subject to the discount percentage.
Whist covering these total values I should possibly mention the total tax value. The total tax value on the opportunity is read-only. It is actually a sum of the tax amount entered for each product line. Out of the box we do not see the tax value in the sub grid on the opportunity form!
However double clicking on a product line will show the opportunity line form. If you need to reflect the tax amount it can be entered on this form.
Note: Out of the box, the tax amount is not a calculated field. Meaning you will have to manually calculate and enter the tax value for each line item. (This same logic applies to write-in and existing products.)
Having entered a tax amount on my line item you can see that it is now shown in the total tax field on the opportunity.
Currencies and Exchange Rates
In earlier posts I have already mentioned currencies and how they affect price lists and price list items. Currencies are associated with opportunities, quotes, orders, invoices and price lists. Each one can only be associated with one currency. So, for example, if you trade in dollars and pounds sterling you will need two price lists. One for each currency.
Exchange rates change frequently! And as already discussed are changed manually as required. But when do these changes impact the calculated currency values???
Currency exchange rate applies when;
- The record is created.
- Whenever a money field is changed. (As the current exchange rate will be applied.)
- The state of the record changes. (For example when an open opportunity is marked as won.)
One final point ….. I have given most of the details in this post in terms of the opportunity entity. However you will need to be aware that the same approach to adding / amending line items exists on the transactional entities of quotation, order and invoice.
I hope this post has helped with your revision for the MB2-717 exam.
|
s3://commoncrawl/crawl-data/CC-MAIN-2023-14/segments/1679296949598.87/warc/CC-MAIN-20230331082653-20230331112653-00012.warc.gz
|
CC-MAIN-2023-14
| 5,906
| 28
|
https://tr.ifixit.com/User/Graph/1086689/ayoshka
|
code
|
My iphone 5 turned black and white. Went in to settings -accessibility- vision and undid the invert colours. So now it is even more black, like a neg. Have read all your answers, but nothing works. When you say home button, do you mean the main button down on front? Thats where I click 3 times right? So have accessed _accessibility-from there to. Still doesnt work....So in anyway, also did restart it of course. Update: so I had to reset it. so now I have colours!!!
|
s3://commoncrawl/crawl-data/CC-MAIN-2019-51/segments/1575540530857.12/warc/CC-MAIN-20191211103140-20191211131140-00509.warc.gz
|
CC-MAIN-2019-51
| 469
| 1
|
https://www.thestudentroom.co.uk/showthread.php?t=7045214
|
code
|
- Study Helper
Are you a current school student struggling with some (all?) of the syllabus?
Or are you a home-schooled student asking how to arrange sitting the exam as an external candidate?
Or are you a mature student looking to get back into studying or needing a higher grade than you have?
Please provide more information so that someone can help you
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-31/segments/1627046154163.9/warc/CC-MAIN-20210801061513-20210801091513-00045.warc.gz
|
CC-MAIN-2021-31
| 356
| 5
|
https://forum.bestpractical.com/t/rest-2-0-404/30722
|
code
|
I’m trying to use the REST API for:
- Move tickets from an older system into RT
- Pull out statistics for Dashing
- Post notifications to Slack
- Create projects in Toggl for technicians to enter time against
Is anyone using it?
I can’t tell from the documentation here:
https://github.com/bestpractical/rt-extension-rest2 if it’s production
ready or not.
If it’s not, does anyone have suggestions for importing ~20,000
tickets into the system along with ~250,000 ‘comments’?
-AOn Mon, May 18, 2015 at 12:00 PM, Aaron C. de Bruyn email@example.com wrote:
I downloaded the REST 2.0 API from github and installed it as well as
adding it to RT_SiteConfig.pl.
When I attempt to access the interface at
https://example.com/REST/2.0/ticket/33, I initially get a message
saying ‘Authorization Required’.
If I use HTTP Basic Auth to authenticate using an RT account that has
full admin privileges, it starts returning 404 not found.
It does this for any address
I have tried accessing them via POST and GET.
The REST 1.0 API works fine.
|
s3://commoncrawl/crawl-data/CC-MAIN-2020-45/segments/1603107889173.38/warc/CC-MAIN-20201025125131-20201025155131-00037.warc.gz
|
CC-MAIN-2020-45
| 1,044
| 22
|
https://dcinglis.wordpress.com/2014/09/
|
code
|
For my Roll Call project I built a while ago I mentioned that I was able to run my local node server off a BeagleBone Black, with a startup script to run the app to make setting up and restarting easier. Here’s how I did it.
First, plug your BeagleBone into your computer, then go to the getting started page on the BeagleBone website and follow all the instructions there. You may need to install some drivers. Once the BeagleBone is working, follow the “Click here to launch” link on that page (I can’t link it here since it’s specific to your IP address). At the top of the page, there should be a green header with a checkmark that verifies your BB is configured correctly. Scroll halfway down the page and launch the Cloud9 IDE on the BB.
Now, copy and save your project onto the BB. I saved mine in the default cloud9 directory inside a folder called LocalHue. Once this is done, navigate to the root directory, then cd /lib/systemd/system. This is where the startup scripts for the OS are stored. In this directory, create a new .service file (I named mine hue-boot.service). Here’s my code for the service file:
The working directory line is where your project is stored. The ExecStart line is the command to run inside that directory (“node app.js” in my case). Change those lines to fit your project as necessary. Next, save the file and you’re done! If you restart your BB the app should run automatically.
|
s3://commoncrawl/crawl-data/CC-MAIN-2018-30/segments/1531676591140.45/warc/CC-MAIN-20180719144851-20180719164851-00134.warc.gz
|
CC-MAIN-2018-30
| 1,435
| 4
|
http://www.silverstripe.org/silverstripe-developer-network/?BrowseByService=Brand+Design&start=20
|
code
|
Key Web has over 16 years of web development experience. We are passionate about creative design and user function, that's why we use SilverStripe. We create a unique look for each project and use other technologies such as flash and ajax and combine these into the Silverstripe CMS. We can also offer SEO and full branding and print services to give a total marketing solution.
We are a small, professional and friendly web studio based in Highgate, North London. Our SilverStripe development experience is vast, from simple CMS sites to complex web applications. We pride ourselves on providing the very highest level of service to our clients as well as building world class websites using the SilverStripe platform.
wunderweiss creates web-applications with SilverStripe (and Python-frameworks).
With experience in more than 5 countries, at Dospuntocero Ltd we provide quality SilverStripe services such as custom module development, psd to SilverStripe, themes and templating for designers.
|
s3://commoncrawl/crawl-data/CC-MAIN-2013-48/segments/1386164018354/warc/CC-MAIN-20131204133338-00017-ip-10-33-133-15.ec2.internal.warc.gz
|
CC-MAIN-2013-48
| 995
| 4
|
https://docs.microsoft.com/en-US/office365/troubleshoot/updates/run-office-365-proplus-2013
|
code
|
How do I keep on running Microsoft 365 Apps for enterprise 2013?
Office 365 ProPlus is being renamed to Microsoft 365 Apps for enterprise. For more information about this change, read this blog post.
Support for this family of products will end in early 2017. For more information, see Support for the 2013 version of Microsoft 365 Apps for enterprise ends February 28, 2017.
To prevent Microsoft Microsoft 365 Apps for enterprise from being automatically updated to Office 2016 over the Internet, use one of the methods in the "Resolution" section.
Apply one of these methods only on installations of Microsoft 365 Apps for enterprise that are configured to automatically receive monthly updates over the Internet. If you've configured Microsoft 365 Apps for enterprise to receive updates from a location on your internal network, or if you've turned off automatic updates, you don't have to use these methods, because you control when the update to Office 2016 occurs.
We've enhanced the upgrade and installation experience, and for Office 365 subscribers we've made changes to how Office 2016 apps will be updated from this point forward. We're also delivering new tools and resources to help you prepare, deploy, and manage Office.
There are two ways to prevent Microsoft 365 Apps for enterprise from updating to Office 2016. Use the method that works best for your organization.
- These methods also work for Office 365 Business, which is the version of Office that comes with the Office 365 Business and Office 365 Business Premium plans.
- Prior to implementing either Method 1 or 2 below, ensure that you have the latest Office 2013 updates installed.
Method 1: Use Group Policy templates
Use the Enable Automatic Upgrade Group Policy setting that's included in the Office 2013 Group Policy Administrative Template files (ADMX/ADML), which you can download from here. This policy setting is located under Computer Configuration\Administrative Templates\Microsoft Office 2013 (Machine)\Updates. Select Disabled.
Group Policy can be used only on computers that are joined to a domain.
Method 2: Set a registry key
Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.
To have us fix this problem for you, go to the "Here's an easy fix" section. If you prefer to fix this problem manually, go to the "Let me fix it myself" section.
Here's an easy fix
To fix this problem automatically, download this easy fix, run MicrosoftEasyFix20156.mini.diagcab, and then follow the steps in the easy fix wizard.
- This wizard may be in English only. However, the automatic fix also works for other language versions of Windows.
- If you're not on the computer that has the problem, save the easy fix solution to a flash drive or a CD, and then run it on the computer that has the problem.
Let me fix it myself
Easy fix 20156
Go to the following location in the registry on each affected computer:
Then, add the following value under the office update subkey:
Support for Office 2013 versions of the Office 365 client applications ended on February 28, 2016. Therefore, we recommend that you update to the Office 2016 version of Microsoft 365 Apps for enterprise as soon as possible. For more information, see Support for the 2013 version of Microsoft 365 Apps for enterprise ends February 28, 2017.
|
s3://commoncrawl/crawl-data/CC-MAIN-2021-43/segments/1634323585737.45/warc/CC-MAIN-20211023162040-20211023192040-00395.warc.gz
|
CC-MAIN-2021-43
| 3,433
| 24
|