hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.1.2.2.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.1.2.2.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.1.2.2.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.1.2.2.4.2 Test procedure | Same as the test procedure given in clause 6.7.1.1.2.4.2 with following exceptions:
- Table 6.7.1.1.2.5-1 is replaced by Table 19.6.1.2.2.5-1.
- Table 6.7.1.1.2.5-2 is replaced by Table 6.7.1.2.2.5-2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.1.2.2.4.3 Message contents | Same as the message contents given in clause 6.7.1.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.1.2.2.5 Test requirement | Same as the test requirements given in clause 6.7.1.2.2.5 with following exceptions:
- Table 6.7.1.2.2.5-1 is replaced by Table Table 19.6.1.2.2.5-1.
Table 19.6.1.2.2.5-1: NR Cell specific test parameters (same as Table 6.7.1.2.1.5-1 with following exceptions)
Parameter
Test configuration
Unit
Test 1
Test 2
Cell 1
Cell... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2 SS-RSRQ for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.0 Minimum conformance requirements | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.0.1 Intra-frequency SS-RSRQ measurement accuracy requirements | Same as in clause 4.7.2.0.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.0.2 Inter-frequency SS-RSRQ absolute measurement accuracy requirements | Same as in clause 4.7.2.0.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.0.3 Inter-frequency SS-RSRQ relative measurement accuracy requirements | Same as in clause 4.7.2.0.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1 NR SA FR1 SS-RSRQ absolute measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.1 Test purpose | The purpose of this test is to verify that the intra-frequency SS-RSRQ measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.2.0.1.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.2.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.2.1.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table 6.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.4.2 Test procedure | Same as the test procedure given in clause 6.7.2.1.4.2 with following exceptions:
- Table 6.7.2.1.5-1 is replaced by Table 19.6.2.1.5-1;
- Table 6.7.2.1.5-2 is replaced by Table 19.6.2.1.5-2; |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.4.3 Message contents | Same as the message contents given in clause 6.7.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.1.5 Test requirement | Same as the test requirements given in clause 6.7.2.1.5 with following exceptions:
- Table 6.7.2.1.5-1 is replaced by Table 19.6.2.1.5-1;
Table 19.6.2.1.5-1: NR Cell specific test parameters (Same as Table 6.7.2.1.5-1 with following exceptions)
Parameter
Test configuration
Unit
Test 1
Test 2
Test 3
Cell 1
Cell 2
Cell 1... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2 Inter-frequency SS-RSRQ measurements for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1 NR SA FR1-FR1 SS-RSRQ absolute measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.1 Test purpose | The purpose of this test is to verify that the inter-frequency SS-RSRQ absolute measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.1.0.3.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.2.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.2.2.1.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.4.2 Test procedure | Same as the test procedure given in clause 6.7.2.1.1.4.2 with following exceptions:
- Table 6.7.2.1.1.5-1 is replaced by Table 19.6.2.2.1.5-1.
- Table 6.7.2.1.1.5-2 is replaced by Table 6.7.2.2.1.5-2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.4.3 Message contents | Same as the message contents given in clause 6.7.2.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.1.5 Test requirement | Same as the test requirements given in clause 6.7.2.2.1.5 with following exceptions:
- Table 6.7.2.2.1.5-1 is replaced by Table 19.6.2.2.1.5-1.
Table 19.6.2.2.1.5-1: NR Cell specific test parameters (Same as Table 6.7.2.2.1.5-1 with following exceptions)
Parameter
Test configuration
Unit
Test 1
Test 2
Test 3
Cell 1
Cel... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2 NR SA FR1-FR1 SS-RSRQ relative measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.1 Test purpose | The purpose of this test is to verify that the inter-frequency SS-RSRP relative measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.1.0.4.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.1.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.2.2.2.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.4.2 Test procedure | Same as the test procedure given in clause 6.7.1.1.2.4.2 with following exceptions:
- Table 6.7.2.2.2.5-1 is replaced by Table 19.6.2.2.2.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.4.3 Message contents | Same as the message contents given in clause 6.7.2.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.2.2.2.5 Test requirement | Same as the test requirements given in clause 6.7.2.2.2.5 with following exceptions:
- Table 6.7.2.2.2.5-1 is replaced by Table 19.6.2.2.1.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3 SS-SINR for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.0 Minimum conformance requirements | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.0.1 Intra-frequency SS-SINR measurement accuracy requirements | Same as in clause 4.7.3.0.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.0.2 Inter-frequency SS-SINR absolute measurement accuracy requirements | Same as in clause 4.7.3.0.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.0.3 Inter-frequency SS-SINR relative measurement accuracy requirements | Same as in clause 4.7.3.0.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1 NR SA FR1 SS-SINR absolute measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.1 Test purpose | The purpose of this test is to verify that the intra-frequency SS-SINR measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards and supporting ss-SINR-Meas. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.3.0.1.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.3.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.3.1.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table 6.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.4.2 Test procedure | Same as the test procedure given in clause 6.7.3.1.4.2 with following exceptions:
- Table 6.7.3.1.5-1 is replaced by Table 19.6.3.1.5-1; |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.4.3 Message contents | Same as the message contents given in clause 6.7.3.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.1.5 Test requirement | Same as the test requirements given in clause 6.7.3.1.5 with following exceptions:
- Table 6.7.3.1.5-1 is replaced by Table 19.6.3.1.5-1;
Table 19.6.3.1.5-1: NR Cell specific test parameters (Same as Table 6.7.3.1.5-1 with following exceptions)
Parameter
Test configuration
Unit
Test 1
Test 2
Cell 1
Cell 2
Cell 1
Cell 2... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2 Inter-frequency SS-SINR measurements for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1 NR SA FR1-FR1 SS-SINR absolute measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.1 Test purpose | The purpose of this test is to verify that the inter-frequency SS-SINR absolute measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards and supporting ss-SINR-Meas. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.1.0.2.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.3.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.3.2.1.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.4.2 Test procedure | Same as the test procedure given in clause 6.7.3.1.4.2 with following exceptions:
- Table 6.7.3.1.5-1 is replaced by Table 19.6.3.2.1.5-1.
- Table 6.7.3.1.5-2 is replaced by Table 6.7.3.2.1.5-2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.4.3 Message contents | Same as the message contents given in clause 6.7.3.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.1.5 Test requirement | Same as the test requirements given in clause 6.7.3.2.1.5 with following exceptions:
- Table 6.7.3.2.1.5-1 is replaced by Table 19.6.3.2.1.5-1.
Table 19.6.3.2.1.5-1: NR Cell specific test parameters (Same as Table 6.7.3.2.1.5-1 with following exceptions)
Parameter
Test configuration
Unit
Test 1
Test 2
Test 3
Cell 1
Cel... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2 NR SA FR1-FR1 SS-SINR relative measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.1 Test purpose | The purpose of this test is to verify that the inter-frequency SS-SINR relative measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards and supporting ss-SINR-meas. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.1.0.3.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.1.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.4.1 Initial conditions | Same as the initial conditions given in clause 6.7.3.2.2.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.4.2 Test procedure | Same as the test procedure given in clause 6.7.3.2.2.4.2 with following exceptions:
- Table 6.7.3.2.2.5-1 is replaced by Table 19.6.2.2.1.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.4.3 Message contents | Same as the message contents given in clause 6.7.3.2.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.3.2.2.5 Test requirement | Same as the test requirements given in clause 6.7.3.2.2.5 with following exceptions:
- Table 6.7.3.2.2.5-1 is replaced by Table 19.6.2.2.1.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4 L1-RSRP measurement for beam reporting for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.0 Minimum conformance requirements | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.0.1 SSB based absolute L1-RSRP measurement accuracy requirements | Same as 4.7.4.0.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.0.2 SSB based relative L1-RSRP measurement accuracy requirements | Same as 4.7.4.0.2. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.0.3 CSI-RS based absolute L1-RSRP measurement accuracy requirements | Same as 4.7.4.0.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.0.4 CSI-RS based relative L1-RSRP measurement accuracy requirements | Same as 4.7.4.0.4. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1 SSB based L1-RSRP measurements for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1 NR SA FR1 SSB based L1-RSRP absolute measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.1 Test purpose | The purpose of this test is to verify that the SSB based L1-RSRP absolute measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.4.0.1.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.4.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.4.1 Initial conditions | Same as the Initial conditions given in clause 6.7.4.1.1.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
- Table ... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.4.2 Test procedure | Same as the test procedure given in clause 6.7.4.1.1.4.2 with the following exceptions:
- Table 6.7.4.1.1.5-1 is replaced by Table 19.6.4.1.1.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.4.3 Message contents | Same as the message contents given in clause 6.7.4.1.1.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.1.5 Test requirement | Same as the test requirements given in clause 6.7.4.1.1.5 with following exceptions:
- Table 6.7.4.1.1.5-1 is replaced by Table 19.6.4.1.1.5-1.
Table 19.6.4.1.1.5-1: NR Cell specific test parameters (Same as Table 6.7.4.1.1.5-1 with following exceptions)
Parameter
Test configuration
Unit
Test 1
Test 2
Propagation Condi... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2 NR SA FR1 SSB based L1-RSRP relative measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.1 Test purpose | The purpose of this test is to verify that the SSB based L1-RSRP relative measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.3 Minimum conformance requirements | The minimum conformance requirements are specified in clause 19.6.4.0.2.
The normative reference for this requirement is TS 38.133 [6] clause A.19.6.4.1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.4 Test description | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.4.1 Initial conditions | Same as the Initial conditions given in clause 6.7.4.1.2.4.1 with following exceptions:
- During the test, UE positioning and UE speed are set by AT command. UE speed is 0km/h, UE specific positioning is emulated by test system.
- During the test, the specific gNB reference location is emulated by test system.
Table 6.... |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.4.2 Test procedure | Same as the test procedure given in clause 6.7.4.1.2.4.2 with following exceptions:
- Table 6.7.4.1.2.5-1 is replaced by Table 19.6.4.1.1.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.4.3 Message contents | Same as the message contents given in clause 6.7.4.1.2.4.3. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.1.2.5 Test requirement | Same as the test requirements given in clause 6.7.4.1.2.5 with following exceptions:
- Table 6.7.4.1.2.5-1 is replaced by Table 19.6.4.1.1.5-1. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.2 CSI-RS based L1-RSRP measurements for ATG | |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.2.1 NR SA FR1 CSI-RS based L1-RSRP absolute measurement accuracy for ATG | Editor’s Note: This test case is incomplete in following aspect:
- TT analysis is still missing. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.2.1.1 Test purpose | The purpose of this test is to verify that the CSI-RS based L1-RSRP absolute measurement accuracy is within the specified limits for all bands. |
f6aa351f9dfcf54f60d7745530e70f1e | 38.533 | 19.6.4.2.1.2 Test applicability | This test applies to all types of NR ATG UE from Release 18 onwards. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.