hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.3.2.2 Physical channel parameters | 6.11.6.4.7.3.2.2.1 Physical channel parameters on HS-PDSCH.
See clause 6.11.6.4.6.1.2.2.2. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1 Uplink | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.1 Transport channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.1.1 Transport channel parameters for E-DCH | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.1.1.1 MAC-d flow parameters for Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] / PS RAB | See clause 6.11.6.4.7.1.1.1.1.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.1.2 Transport channel parameters for Conversational / speech / UL:12.2 kbps / CS RAB | See clause 6.11.6.4.1.4.1.1.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.1.3 Transport channel parameters for UL:3.4 kbps SRBs for DCCH | See clause 6.11.6.4.1.2.1.1.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.1.4 TFCS | See clause 6.11.6.4.1.4.1.1.3. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.2 Physical channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.2.1 Physical channel parameters on E-PUCH | See clause 6.11.6.4.7.1.1.2.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.1.2.2 Physical channel parameters on DCH | See clause 6.11.6.4.1.4.1.2. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.4.2 Downlink | See clause 6.11.6.4.6.3.2.
6.11.6.4.7.5 Streaming or interactive or background / UL:[max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] kbps / PS RAB + Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1 Uplink | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.1 Transport channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.1.1 Transport channel parameters for E-DCH | MAC-e multiplexing between all MAC-d flows in the same MAC-e PDU shall be configured. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.1.1.1 MAC-d flow #1 parameters for Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] / PS RAB | See clause 6.11.6.4.7.1.1.1.1.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.1.1.2 MAC-d flow #2 parameters for Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] / PS RAB | See clause 6.11.6.4.7.1.1.1.1.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.1.1.3 MAC-d flow #3 parameters for UL: [max bit rate depending on UE category and TTI] SRBs for E-DCH | See clause 6.11.6.4.7.2.1.1.1.2. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.2 Physical channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.1.2.1 Physical channel parameters on E-PUCH | See clause 6.11.6.4.7.1.1.2.1. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.6.4.7.5.2 Downlink | See clause 6.11.6.4.6.3.2. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7 Reference Radio Bearer configurations used in Radio Bearer testing for 3.84 Mcps TDD IMB | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.1 Combinations of RABs and Signalling RBs | In the present document, physical channel parameters for following combinations of RABs and signalling RBs on a CCTrCH are described.
Combinations on SCCPCH
1) 7.6 kbps signalling RB for MBSFN MCCH with 40ms TTI
Combinations on SCCPCH Type 2
1) 124.4kbps RB for MBSFN MTCH with 80 ms TTI
2) 320.4kbps RB for MBSFN MTCH w... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2 Typical radio parameter sets | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.1 Combination on SCCPCH | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.1.1 7.6 kbps signalling RB for MBSFN MCCH with 40ms TTI | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.1.1.1 Transport channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.1.1.1.1 Transport channel parameters for 7.6 kbps signalling RB for MCCH | Higher layer
RAB/signalling RB
SRB
User of Radio Bearer
MBMS
RLC
Logical channel type
MCCH
RLC mode
UM
Payload sizes, bit
152
Max data rate, bps
7600
UMD PDU header, bit
8
MAC
MAC header, bit
-
MAC multiplexing
N/A
Layer 1
TrCH type
FACH
TB sizes, bit
80
TFS
TF0, bits
0x160
TF1, bits
1x160
TF2, bits
2x160
TTI, ms
40
Co... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.1.1.1.2 TFCS | TFCS size
3
TFCS
MBMS SRB =TF0, TF1, TF2 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.1.1.2 Physical channel parameters | S-CCPCH
DTX position
Flexible
Spreading factor
256
Number of codes
1
Number of data bits/slot
16
Number of data bits/frame
240
Modulation
QPSK
Slot Format #
Format 1 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2 Combinations on SCCPCH Type 2 | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.1 124.4kbps RB for MBSFN MTCH with 80 ms TTI | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.1.1 Transport channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.1.1.1 Transport channel parameters for 124.4 kbps PS RAB | Higher layer
RAB/signalling RB
RAB
User of Radio Bearer
MBMS
RLC
Logical channel type
MTCH
RLC mode
UM
Payload sizes, bit
4976
Max data rate, bps
124400
UMD PDU header, bit
8
MAC
MAC header, bit
8
MAC multiplexing
N/A
Layer 1
TrCH type
FACH
TB sizes, bit
4992
TFS
TF0, bits
0x4992
TF1, bits
1x4992
TF2, bits
2x4992
TTI, ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.1.1.2 TFCS | TFCS size
3
TFCS
124 kbps RAB =TF0, TF1, TF2 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.1.2 Physical channel parameters | S-CCPCH Type 2
DTX position
Flexible
Spreading factor
16
Number of codes
4
Number of data bits/slot
1136
Number of data bits/frame
3408
Modulation
QPSK
Slot Format #
Format 2 and 3 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.2 320.4kbps RB for MBSFN MTCH with 80 ms TTI | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.2.1 Transport channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.2.1.1 Transport channel parameters for 320.4 kbps PS RAB | Higher layer
RAB/signalling RB
RAB
User of Radio Bearer
MBMS
RLC
Logical channel type
MTCH
RLC mode
UM
Payload sizes, bit
4272
Max data rate, bps
320400
UMD PDU header, bit
8
MAC
MAC header, bit
8
MAC multiplexing
N/A
Layer 1
TrCH type
FACH
TB sizes, bit
4288
TFS
TF0, bits
0x4288
TF1, bits
1x4288
TF2, bits
2x4288
TF3, ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.2.1.2 TFCS | TFCS size
7
TFCS
320 kbps RAB =TF0, TF1, TF2, TF3, TF4, TF5, TF6 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.2.2 Physical channel parameters | S-CCPCH Type 2
DTX position
Flexible
Spreading factor
16
Number of codes
4
Number of data bits/slot
2288
Number of data bits/frame
6864
Modulation
16QAM
Slot Format #
Format 4 and 5 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.3 497.6kbps RB for MBSFN MTCH with 80 ms TTI | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.3.1 Transport channel parameters | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.3.1.1 Transport channel parameters for 497.6 kbps PS RAB | Higher layer
RAB/signalling RB
RAB
User of Radio Bearer
MBMS
RLC
Logical channel type
MTCH
RLC mode
UM
Payload sizes, bit
4976
Max data rate, bps
497600
UMD PDU header, bit
8
MAC
MAC header, bit
8
MAC multiplexing
N/A
Layer 1
TrCH type
FACH
TB sizes, bit
4992
TFS
TF0, bits
0x4992
TF1, bits
1x4992
TF2, bits
2x4992
TF3, ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.3.1.2 TFCS | TFCS size
9
TFCS
496 kbps RAB =TF0, TF1, TF2, TF3, TF4, TF5, TF6, TF7, TF8 |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 6.11.7.2.2.3.2 Physical channel parameters | S-CCPCH Type 2
DTX position
Flexible
Spreading factor
16
Number of codes
5
Number of data bits/slot
2864
Number of data bits/frame
8592
Modulation
16QAM
Slot Format #
Format 4 and 5
7 Generic setup procedures |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1 Basic Generic Procedures | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.1 UE Test States for Basic Generic Procedures | This clause describes a set of procedures for use by test cases in 3GPP TS 34.123-1 [1]. Describing these procedures in a generic manner allows their use in many test cases. By using these procedures, test case descriptions need not detail signalling that is not relevant to its purpose or understanding.
The procedures ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2 Mobile terminated establishment of Radio Resource Connection | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.1 Initial conditions | System Simulator:
The system simulator will start from the default idle state. Parameters will the default parameters for a single cell, unless otherwise specified in the test case.
User Equipment:
Unless otherwise specified in the test case, the UE will be in the following state:
- Default test operating conditions.
-... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.3 Procedure | - The SS sends a PAGING TYPE 1 message to the UE on the appropriate paging block, and with the IE "Paging record" containing the TMSI or P-TMSI of the UUT.
- The SS receives an RRC CONNECTION REQUEST message from the UE.
- On receipt of the RRC CONNECTION REQUEST the SS shall transmit a RRC CONNECTION SETUP message to ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.4 Specific message contents | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.4.1 PAGING TYPE 1 | This message is sent from the SS to the UE, using the TM RLC SAP, on the PCCH logical channel.
Information Element
Value/Remark
Message Type
PAGING TYPE 1
UE Information elements
Paging record list
Paging record
CN originator
Paging cause
Terminating Speech Call (note)
CN domain identity
CS domain (note)
UE Identity
TM... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.4.3 RRC CONNECTION SETUP | This message is sent from the SS to the UE using the UM-RLC SAP. The message is sent on the CCCH Logical channel.
The default RRC CONNECTION SETUP message for the transition to connected mode CELL_DCH is used except for the IE fields specified below.
Information Element
Value/Remark
Message Type
RRC CONNECTION SETUP
UE... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.2.4.4 RRC CONNECTION SETUP COMPLETE | This message is sent by the UE to the SS using AM-RLC SAP. The message is sent on the DCCH Logical channel.
Information Element
Value/Remark
Message Type
RRC CONNECTION SETUP COMPLETE
UE Information Elements
Hyper frame number
Not checked
UE radio access capability
Conformance test compliance
R99
PDCP capability
Suppor... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3 Radio Bearer Setup Procedure | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3.1 Initial conditions | The procedure specified in clause 7.1.2 will be run. This procedure starts from the successful completion of clause 7.1.2. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3.3 Procedure | - The SS sends a RADIO BEARER SETUP message to the UE on the DCCH established by the RRC Connection Establishment procedure.
- The SS receives a RADIO BEARER SETUP COMPLETE message from the UE in RLC Acknowledged mode on the DCCH.
On receiption of the RADIO BEARER SETUP COMPLETE the procedure is complete.
Step
Directio... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3.4 Specific message contents | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3.4.1 RADIO BEARER SETUP | The RADIO BEARER SETUP message is sent from the System Simulator to the UE, using AM-RLC on the DCCH logical channel.
The default RRC CONNECTION SETUP message for the setup of a speech radio access bearer is used except for the IE fields specified below.
Information Element
Value/Remark
Message Type
RADIO BEARER SETUP
... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.1.3.4.2 RADIO BEARER SETUP COMPLETE | The RADIO BEARER SETUP COMPLETE message is sent from the UE to the System Simulator, using AM-RLC on the DCCH logical channel.
The default RADIO BEARER SETUP COMPLETE message is used.
Information Element
Value/Remark
Message Type
RADIO BEARER SETUP COMPLETE
Use default |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2 Generic setup procedures | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.1 UE Test States for Generic setup procedures | Figure 7.2.1.1: UE Test States for Generic setup procedures
In order that the UE can set up a call in UTRAN, there are a number of procedures to be undertaken in a hierarchical sequence to move between known states. The sequences are shown in figure 7.2.1.1 and the status of the relevant protocols in the UE in the diff... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2 Registration of UE | The default procedures required to achieve the changes of state between State 1, in clause 7.2.1, and States 2, 3 and 7 are illustrated in the following clauses.
The choice of which procedure to use given a UE supporting packet services is influenced by the Network Mode of Operation being simulated by the SS and by the... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.1 Registration on CS | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.1.1 Initial condition | System Simulator:
- 1 cell, default parameters.
User Equipment:
- The UE shall be operated under normal test conditions.
- The Test-USIM shall be inserted. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.1.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.1.3 Procedure | Registration of UE for SS shall be established under ideal radio conditions as defined in clause 5.
Step
Direction
Message
Comments
UE
SS
1
¬
SYSTEM INFORMATION (BCCH)
NW Broadcast
2
RRC CONNECTION REQUEST (CCCH)
RRC
3
¬
RRC CONNECTION SETUP (CCCH)
RRC
4
RRC CONNECTION SETUP COMPLETE (DCCH)
RRC
5
LOCATION UPDATIN... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.1.4 Specific message contents | All Specific message contents shall be referred to clause 9. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.2 Registration on PS | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.2.1 Initial condition | System Simulator:
- 1 cell, default parameters.
User Equipment:
- The UE shall be operated under normal test conditions.
- The Test-USIM shall be inserted.
-If RAN Assisted WLAN interworking test cases are being performed for ANDSF rules using RAN provided thresholds, ANDSF rules to match the RAN rules defined in TS 25... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.2.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.2.3 Procedure | Registration of UE for SS shall be established under ideal radio conditions as defined in clause 5.
Step
Direction
Message
Comments
UE
SS
1
SYSTEM INFORMATION (BCCH)
NW Broadcast
2
RRC CONNECTION REQUEST (CCCH)
RRC
3
RRC CONNECTION SETUP (CCCH)
RRC
4
RRC CONNECTION SETUP COMPLETE (DCCH)
RRC
5
ATTACH REQUEST
G... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.2.4 Specific message contents | All Specific message contents shall be referred to clause 9. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.3 Registration on CS / PS combined environment | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.3.1 Initial condition | System Simulator:
- 1 cell operating in network operation mode I, default parameters.
User Equipment:
- The UE shall be operated under normal test conditions.
- The Test-USIM shall be inserted.
- If RAN Assisted WLAN interworking test cases are being performed for ANDSF rules using RAN provided thresholds, ANDSF rules ... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.3.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.3.3 Procedure UE establish PS registration immediately after the UE has been switched on | Registration of UE for SS shall be established under ideal radio conditions as defined in clause 5.
Step
Direction
Message
Comments
UE
SS
1
¬
SYSTEM INFORMATION (BCCH)
NW Broadcast
2
®
RRC CONNECTION REQUEST (CCCH)
RRC
3
¬
RRC CONNECTION SETUP (CCCH)
RRC
4
®
RRC CONNECTION SETUP COMPLETE (DCCH)
RRC
5
®
ATTACH REQUEST
G... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.3.4 Specific message contents | All Specific message contents shall be referred to clause 9. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.4 Registration on CS / PS non-combined environment | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.4.1 Initial condition | System Simulator:
- 1 cell operating in network operation mode II, default parameters.
User Equipment:
- The UE set to Operation mode A
- The UE shall be operated under normal test conditions.
- The Test-USIM shall be inserted. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.4.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.4.3 Procedure | Registration of UE for SS shall be established under ideal radio conditions as defined in clause 5.
Registrations in the CS domain and in the PS domain shall execute independently. The separate registration procedures may occur sequentially or in parallel. If the procedures occur sequentially PS domain registration ca... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.2.4.4 Specific message contents | All Specific message contents shall be referred to clause 9. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3 Call setup | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.1 Generic call set up procedure for mobile terminating circuit switched calls | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.1.1 Initial conditions | System Simulator:
- 1 cell, default parameters.
User Equipment:
- The UE shall be operated under normal test conditions.
- The Test-USIM shall be inserted. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.1.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.1.3 Procedure | The Call Set-up procedure shall be performed under Ideal radio conditions as defined in clause 5.
Step
Direction
Message
Comments
UE
SS
1
SYSTEM INFORMATION (BCCH)
Broadcast
2
PAGING (PCCH)
Paging
3
RRC CONNECTION REQUEST (CCCH)
RRC
4
RRC CONNECTION SETUP (CCCH)
RRC
5
RRC CONNECTION SETUP COMPLETE (DCCH)
RRC
... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.1.4 Specific message contents | All Specific message contents shall be referred to clause 9. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.2 Generic call set-up procedure for mobile originating circuit switched calls | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.2.1 Initial conditions | System Simulator:
- 1 cell, default parameters.
User Equipment:
- The UE shall be operated under normal test conditions.
- The Test-USIM shall be inserted. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.2.2 Definition of system information messages | The default system information messages are used. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.2.3 Procedure | The Call Set-up procedure shall be performed under Ideal radio conditions as defined in clause 5.
Step
Direction
Message
Comments
UE
SS
1
SYSTEM INFORMATION (BCCH)
Broadcast
2
RRC CONNECTION REQUEST (CCCH)
RRC
3
RRC CONNECTION SETUP (CCCH)
RRC
4
RRC CONNECTION SETUP COMPLETE (DCCH)
RRC
5
CM SERVICE REQUEST
M... |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.2.4 Specific message contents | All Specific message contents shall be referred to clause 9. |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.3 Supplementary service procedures | |
3a85e454e39f475ca4cc8cf8d274b2b4 | 34.108 | 7.2.3.3.1 Generic procedures for Multiparty call set up |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.