hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.2.4.10 LCS Mobile terminated location request/ UE-Based or UE-Assisted GPS/ Configuration Incomplete | This test case is provided in 3GPP TS 37.571-2 [49], sub-clause 6.1.3.10. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.2.5 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.2.6 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.2.7 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3 Mobility between 3GPP WLAN Interworking and 3GPP Systems | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.1 Discovery of the Home Agent via DNS | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.1.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems, and discovery of the Home Agent via DNS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.1.2 Conformance requirement | From TS 24.327 clause 5.1.2.2
The first procedure the UE needs to perform for DSMIPv6 initial attach is the discovery of the node acting as the HA.
The UE discovers the IPv6 address and optionally the IPv4 address of the HA in one of the three following ways:
- via DNS as defined in 3GPP TS 24.303 [3];
- during the PDP... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.1.3 Test purpose | The purpose of this test case is to verify that when the UE is configured to discover the IP address of the Home Agent via DNS, it transmits a DNS Query with QNAME set to the FQDN of the Home Agent. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.1.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE is configured to discover the Home Agent address via DNS.
- The UE is configured with a DNS server address.
- The UE is configured with the HA-APN Network Identifier.
- The UE h... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.1.5 Test requirements | 1. At Step 1, UE shall send a DNS Query message with QNAME set to the FQDN of the Home Agent (derived from HA-APN Network Identifier and PLMN information). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.2 Discovery of the Home Agent address and Home Network Prefix during PDP context activation procedure | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.2.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.2.2 Conformance requirement | from TS 24.327, subclause 5.1.2.2
The first procedure the UE needs to perform for DSMIPv6 initial attach is the discovery of the node acting as the HA.
The UE discovers the IPv6 address and optionally the IPv4 address of the HA in one of the three following ways:
- via DNS as defined in 3GPP TS 24.303 [3];
- during the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.2.3 Test purpose | 1) To verify that when the UE has sets up PDP context, it requests for Home Agent IPv6 address and optionally for Home Agent IPv4 address and Home Network Prefix |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.2.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in GMM-state "GMM-REGISTERED, normal service".
Related ICS/IXIT Statements
Support of mobility between 3GPP WLAN Interworking and 3GPP Systems
Test procedure
a) UE sets request for a Home Agent address and Home Netw... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.2.5 Test requirements | 1) In step 1, the UE shall request for HA IPv6 address and optionally HA IPv4 address and Home Network Prefix to the GGSN within the Protocol Configuration Options IE. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.3 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.4 Security association establishment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.4.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.4.2 Conformance requirement | From TS 24.327 clause 5.1.2.3
The UE shall perform the security association establishment with the HA as specified in 3GPP TS 24.303 [3]. For this procedure the UE shall support IKEv2 protocol and EAP over IKEv2 as described in IETF RFC 4306 [9]. The detailed procedure and supported extensions for this step are specifi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.4.3 Test purpose | 1. To verify that when the UE has acquired the IP address of the Home Agent, it transmits an IKE_SA_INIT message addressed to the Home Agent to initiate security association establishment.
2. To verify that when the UE receives an IKA_SA_INIT response message, it transmits an IKE_AUTH Request message containing the con... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.4.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IP address.
- The UE has discovered the IP address of the Home Agent (either via DNS, IKEv2 signalling or during PDP context activation procedure).
Related ICS/I... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.4.5 Test requirements | 1. At Step 1, UE shall send an IKE_SA_INIT message addressed to the Home Agent to initiate security association establishment.
2. At Step 3, UE shall send an IKE_AUTH Request message containing the configuration payload MIP6_HOME_PREFIX.
3. At Step 5, UE shall send an IKE_AUTH Request message containing the correct EAP... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.5 Registration of a new IPv6 CoA (Binding Update/Acknowledgment procedure in IPv6 network) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.5.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.5.2 Conformance requirement | From TS 24.327 clause 5.1.2.5
After establishing the security association and obtaining the IPv6 home network prefix and after performing the home link detection, if not on the home link, the UE shall send a Binding Update message as specified in 3GPP TS 24.303 [3] to register its IPv6 home address with its care-of add... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.5.3 Test purpose | To verify that when the UE has established a security association with the Home Agent and received the IPv6 Home Address, upon detecting that it is not on the Home Link, it transmits a Binding Update message in order to register it Home Address and Care-of-Address at the Home Agent. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.5.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE’s Prefix List has been cleared.
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IP address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.5.5 Test requirements | 1. At Step 2, UE shall send a Binding Update with its IPv6 CoA in the IP Source Address field of the IP Header and the IPv6 Home Agent address in the IP destination Address field of the IP header. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.6 Registration of a new IPv4 CoA (Binding Update/Acknowledgment procedure in IPv4 network) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.6.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.6.2 Conformance requirement | From TS 24.327 clause 5.1.2.5
After establishing the security association and obtaining the IPv6 home network prefix and after performing the home link detection, if not on the home link, the UE shall send a Binding Update message as specified in 3GPP TS 24.303 [3] to register its IPv6 home address with its care-of add... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.6.3 Test purpose | To verify that when the UE has established a security association with the Home Agent and received the IPv6 Home Address, upon detecting that it is not on the Home Link, it transmits a Binding Update message in order to register it Home Address and Care-of-Address at the Home Agent. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.6.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE’s Prefix List has been cleared.
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IPv4 address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.6.5 Test requirements | 1. At Step 1, UE shall send a Binding Update with its IPv4 CoA in the IP Source Address field of the IP Header and the IPv4 Home Agent address in the IP destination Address field of the IP header. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.7 Re-registration of IPv6 CoA | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.7.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.7.2 Conformance requirement | From TS 24.303 clause 5.3.2
As specified in IETF RFC 3775 [6], if the UE wants to extend the validity of an existing binding at the HA, the UE shall send a new Binding Update to the HA before the expiration of the lifetime indicated in the received Binding Acknowledgement, even if it is not changing its primary Care-of... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.7.3 Test purpose | To verify that when the registration of the UE’s Care-of-Address is about to expire, the UE initiates the re-registration procedure to extend the lifetime of the registration of its Care-of-Address. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.7.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE’s Prefix List has been cleared.
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IP address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.7.5 Test requirements | 1. Within 10 min of Step 3, UE shall send a Binding Update with its IPv6 CoA in the IP Source Address field of the IP Header and the IPv6 Home Agent address in the IP Destination Address field of the IP header. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.8 Re-registration of Ipv4 CoA | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.8.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.8.2 Conformance requirement | From TS 24.303 clause 5.3.2
As specified in IETF RFC 3775 [6], if the UE wants to extend the validity of an existing binding at the HA, the UE shall send a new Binding Update to the HA before the expiration of the lifetime indicated in the received Binding Acknowledgement, even if it is not changing its primary Care-of... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.8.3 Test purpose | To verify that when the registration of the UE’s Care-of-Address is about to expire, the UE initiates the re-registration procedure to extend the lifetime of the registration of its Care-of-Address. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.8.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE’s Prefix List has been cleared.
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IPv4 address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.8.5 Test requirements | 1. Within 10 min of Step 2, UE shall send a Binding Update with its IPv4 CoA in the IP Source Address field of the outer IP Header and the IPv4 Home Agent address in the IP Destination Address field of the outer IP header. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.9 Return to home link | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.9.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.9.2 Conformance requirement | From TS 24.327 clause 5.2.2.1
When the UE is connected to the GPRS systems and wants to move to 3GPP I-WLAN, the UE shall initiate the tunnel establishment procedure towards the PDG as described in 3GPP TS 24.234 [5] and shall then perform the home link detection as described in subclause 5.1.2.4:
…
- If the UE is on t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.9.3 Test purpose | To verify that when the UE detects it is attached to the home link, it transmits a Binding Update message with the lifetime field set to “0”. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.9.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IP address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by executing the steps in test case 17.3.4 wi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.9.5 Test requirements | 1. At Step 2, UE shall send a Binding Update message with the lifetime field set to “0”. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.10 Security association establishment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.10.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.10.2 Conformance requirement | Reference(s)
3GPP TS 24.327 clause 5.4.1
UE and HA may create a child security association using the IKEv2 session established as described in subclause 5.1.2.3. This child security association is used to cipher or integrity protect, or both, all data traffic exchanged within the DSMIPv6 tunnel. The profiles for tunnel... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.10.3 Test purpose | To verify that when the HA sets up a Child SA by sending a CREATE_CHILD_SA Request the UE replies with a CREATE_CHILD_SA Response. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.10.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IP address.
- The UE has discovered the IP address of the Home Agent (either via DNS, IKEv2 signalling or during PDP context activation procedure).
- The UE has ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.10.5 Test requirements | 1. At Step 2, UE shall send a CREATE_CHILD_SA response addressed to the Home Agent to initiate data traffic tunnelling. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.11 Termination of protection of DSMIPv6 tunnel traffic by Home Agent | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.11.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.11.2 Conformance requirement | From TS 24.327 clause 5.4.1
UE and HA may create a child security association using the IKEv2 session established as described in subclause 5.1.2.3. This child security association is used to cipher or integrity protect, or both, all data traffic exchanged within the DSMIPv6 tunnel. The profiles for tunnel mode IPsec E... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.11.3 Test purpose | To verify that when the Home Agent terminates the previously set up Child SA by sending an INFORMATIONAL Request, the UE replies with an INFORMATIONAL Response. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.11.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IP address.
- The UE has discovered the IP address of the Home Agent (either via DNS, IKEv2 signalling or during PDP context activation procedure).
- The UE has ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.11.5 Test requirements | 1. At Step 2, the UE shall send an INFORMATIONAL response addressed to the Home Agent to stop data traffic encryption. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.12 Dual-Stack Mobile IPv6 detach in IPv6 network | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.12.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.12.2 Conformance requirement | From TS 24.327 clause 5.3.2.1
The network-initiated detach is based on the usage of the Binding Revocation Indication (BRI) message. When the UE receives a BRI, it shall proceed as described in 3GPP TS 24.303 [3].
From TS 24.303 clause 5.4.2.1
Upon receiving a Binding Revocation Indication (BRI) message according to dr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.12.3 Test purpose | To verify that when the UE receives a Binding Revocation Indication message from the HA, it transmits a Binding Revocation Acknowledgement message with the status field set to ‘Success’, and removes the IPsec security associations associated with the DSMIPv6 registration. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.12.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IPv6 address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by executing the steps in test case 17.3.4 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.12.5 Test requirements | 1. At Step 2, UE shall send a Binding Revocation Acknowledgement message with the status field set to ‘Success’.
2. At Step 3, UE shall send an IKEv2 INFORMATIONAL message containing a DELETE payload. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.13 Dual-Stack Mobile IPv6 detach in IPv4 network | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.13.1 Definition and applicability | This test case is applicable for all UEs which support mobility between 3GPP WLAN Interworking and 3GPP Systems. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.13.2 Conformance requirement | From TS 24.327 clause 5.3.2.1
The network-initiated detach is based on the usage of the Binding Revocation Indication (BRI) message. When the UE receives a BRI, it shall proceed as described in 3GPP TS 24.303 [3].
From TS 24.303 clause 5.4.2.1
Upon receiving a Binding Revocation Indication (BRI) message according to dr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.13.3 Test purpose | To verify that when the UE receives a Binding Revocation Indication message from the HA, it transmits a Binding Revocation Acknowledgement message with the status field set to ‘Success’, and removes the IPsec security associations associated with the DSMIPv6 registration. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.13.4 Method of test | Initial Conditions
- System simulator:
- 1 cell, default parameters.
- User Equipment:
- The UE shall be in MM-state "Idle, updated".
- The UE has acquired an IPv4 address.
- The UE has established a security association with the Home Agent and obtained an IPv6 Home Address, by executing the steps in test case 17.3.4.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 17.3.13.5 Test requirements | 1. At Step 2, UE shall send a Binding Revocation Acknowledgement message with the status field set to ‘Success’.
2. At Step 3, UE shall send an IKEv2 INFORMATIONAL message containing a DELETE payload.
18 Multi-Layer Functional tests
The present clause specifies the multi-layer functional test cases that are not covere... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1 Radio Bearer Tests for 1.28 Mcps TDD option | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1 General information for radio bearer tests (1.28 Mcps TDD) | The purpose of these radio bearer test cases is to test properly the Reference Radio Bearer configurations included in TS34.108 [9], clause 6.11 for 1.28 Mcps TDD option.
The applicability of radio bearer tests is dependent on the UE uplink and downlink radio access capabilities and UE support tele- and bearer-services... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.1 Generic radio bearer test procedure for Single RB configuration | See 14.1.1for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.2 Generic test procedure for testing multi-RB configuration and simultaneous signalling | See 14.1. 2 for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.3 Generic test procedure radio bearers on MTCH | See 14.1.5 for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.4 General information interoperability radio bearer tests for E-DCH and HS-DSCH combinations | See 14.1.4 for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.5 Generic test procedure for radio bearers on MBSFN MTCH | See 18.2.1.6 for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.6 Generic test procedure for HS-DSCH radio bearer combinations with non-enhanced Layer 2 | See 14.1.3.5 for test procedure
18.1.1.6a General information interoperability radio bearer tests for HS-DSCH
18.1.1.6a.1 HS-DSCH radio bearer test parameters
In the radio bearer tests on radio bearers mapped on HS-DSCH, the following UE specific parameters should be used.
Table 18.1.1.6a.1.1: 1.28 Mcps TDD HS-DSCH phy... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.7 Generic test procedure for HS-DSCH radio bearer combinations with enhanced Layer 2 | See 14.1.3.5a for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.8 Generic test procedure for HS-DSCH and E-DCH radio bearer combinations with downlink and uplink enhanced Layer 2 | See 14.1.4.1b for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.1.9 Generic test procedure for HS-DSCH and E-DCH radio bearer combinations for enhanced uplink in CELL_FACH | See 14.1.4.3 for test procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2 Combinations on DPCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.1 Stand-alone UL:1.7 DL:1.7 kbps SRBs for DCCH | Test to verify establishment and signalling of stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.1.
The test case is performed by running test case 9.4.1 (Location updating / accepted) using the stand-alone signalling reference radio bearer configuration as specifi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.2 Stand-alone UL:3.4 DL:3.4 kbps SRBs for DCCH | Test to verify establishment and signalling of stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.2.
The test case is performed by running test case 9.4.1 (Location updating / accepted) using the stand-alone signalling reference radio bearer configuration as specifi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.3 Stand-alone UL:13.6 DL:13.6 kbps SRBs for DCCH | Implicitly tested.
NOTE: The stand-alone UL:13.6 DL:13.6 kbps SRBs for DCCH in TS 34.108, clause 6.11.5.4.1.3 is the default signalling radio bearer used in the generic setup procedure as specified in TS 34.108 clause 7. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.4.1 Conformance requirement | The UE shall be able to establish the UTRAN requested radio bearers within the UE’s signalled radio access capabilities.
The UE shall correctly transfer user data from peer to peer RLC entities according to the requested radio bearer configuration.
Reference(s)
3GPP TS 25.331, clause 8.2.1
3GPP TS 25.2xx series (Physic... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.4.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.4. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.4.3 Method of test | Uplink TFS:
TFI
RB5
(RAB subflow #1)
RB6
(RAB subflow #2)
RB7
(RAB subflow #3)
DCCH
TFS
TF0, bits
0x81(alt. 1x0)
0x103
0x60
0x148
TF1, bits
1x39
1x103
1x60
1x148
TF2, bits
1x81
N/A
N/A
N/A
Uplink TFCS:
TFCI
(RB5, RB6, RB7, DCCH)
UL_TFC0
(TF0, TF0, TF0, TF0)
UL_TFC1
(TF1, TF0, TF0, TF0)
UL_TFC2
(TF2, TF1, TF1, TF0)
UL_T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.5 Conversational / speech / UL:10.2 DL:10.2 kbps / CS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.5.1 Conformance requirement | See clause 18.1.2.4.1. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 18.1.2.5.2 Test purpose | To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.5. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.