hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.4 SCL_034 - Link Service Gate additional registry entry | Test ID SCL_034 Test objectives To retrieve the additional registry entry of the Link Service Gate. Checking the minimal value of the SSP_MTU Configuration reference CSCL_004 Initial conditions Test sequence Step Description Requirements 1 Link application gate sends ANY_GET_PARAMETER command with the register identifi... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.5 SCL_035 - Credit based data flow control on administration gate | Test ID SCL_035 Test objectives The administration gate shall not generate EVT_ADM_RECEIVED or EVT_ADM_CREDIT with pipe identifier related to static pipes. Configuration reference CSCL_001 Initial conditions The procedure PSCL_021 is successfully executed. Test sequence Step Description Requirements 1 Identity applicat... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.6 End of ASN.1 structure | The annex shall be appended at the end of the SCL test descriptions. -- ASN1START END -- ASN1STOP |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.7 Requirements not testable, implicitly verified or verified elsewhere | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.7.1 Requirements implicitly tested | The following requirements identified in clause 5.4.4 are generated from descriptive text. An explicit verification is not possible but with correct execution of the related function the requirements can be handled as implicitly verified: RQ0804_019 |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.7.2 Requirements verified elsewhere | The following requirements identified in clause 5.4.3 are not tested in accordance with the present document, as they are referencing requirements from a different standardization body: RQ0804_001, RQ0804_002, RQ0804_003, RQ0804_007, RQ0804_008, RQ0804_009, RQ0804_021, RQ0804_024, RQ0804_025. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.4.3.7.3 Requirements tested in a different clause | The following requirements are tested in a different clause of the present document: RQ0804_015, RQ0804_016, RQ0804_017, RQ0804_022 ETSI ETSI TS 103 999-1 V15.2.0 (2023-01) 249 Release 15 |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.5 SCL procedures | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.5.1 Requirements verified elsewhere | The following requirements identified in clause 5.4.5 are not tested in accordance with the present document, as they are referencing requirements from a different standardization body: RQ0805_001, RQ0805_002, RQ0805_005, RQ0805_006, RQ0805_007 |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 8.5.2 Requirements not tested | The following requirements identified in clause 5.4.2 are either generated from descriptive text or not testable in the defined test environment. A verification of the listed requirements is not possible: RQ0805_003, RQ0805_004 |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9 Test Descriptions: Secure SCL | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.1 Protocol stack | There are no test descriptions related to clause 9.1 of ETSI TS 103 666-1 [1]. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.2 Secure datagram | 9.2.1 Requirements verified elsewhere The following requirements identified in clause 5.5.2 are tested in SSL_034: RQ0902_001, RQ0902_002, RQ0902_003, RQ0902_004, RQ0902_005, RQ0902_006, RQ0902_007, RQ0902_008, RQ0902_009, RQ0902_010, RQ0902_0. 9.2.2 Requirements not tested The following requirements identified in clau... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3 Security protocol | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.1 Configurations | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.1.1 Referred configurations | The test descriptions refer to the following configurations: • CAAS_001-Accessor and Identity services. ETSI ETSI TS 103 999-1 V15.2.0 (2023-01) 250 Release 15 |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.1.2 ASN.1 definitions | The following definitions are used for the procedures and the test descriptions. -- ASN1START SSPSSLconfigurations { itu-t (0) identified-organization (4) etsi (0) smart-secure- platform (3666) part1 (1) test (2) secure_scl (5)} DEFINITIONS AUTOMATIC TAGS EXTENSIBILITY IMPLIED ::= BEGIN EXPORTS ALL; /* Imports */ IMPOR... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.1.3 Implicit requirements | There are no implicit requirements. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.1.4 Software tools | Software tools associated with these test descriptions are available in the ETSI forge repository as defined in [i.1]. These tools are provided as examples of how to generate the required data for tests. The tools enable a tester to generate: • The AAS certification path (authentic) leading to a correct certification p... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.2 Procedures | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.2.1 Referred procedures | The test descriptions refer to the following procedures in clause 6.13.2: • PAAS_021: Open a pipe session with the Identity gate • PAAS_022: Open a pipe session with the ROOT Accessor Authentication service • PAAS_023: Open a pipe session with the Anonymous Accessor Authentication service of the Anonymous Accessor • PA... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.3 Test descriptions- Security protocol | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.3.1 SSL_031 - Shared secret initialization | Test ID SSL_031 Test objectives The root accessor shall be able to be authenticated with the Accessor Authentication service by using: • The aAAS-OP-GET-CHALLENGE-Service-Command command. • The aAAS-OP-AUTHENTICATE-ACCESSOR-Service-Command command. This authentication is based on authentication tokens. Configuration re... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.3.2 SSL_032 - Access to the Authentication Service from the ROOT accessor | Test ID SSL_032 Test objectives The root accessor shall be able to be authenticated with the Accessor Authentication service by using: • The aAAS-OP-ACCESS-SERVICE-Service-Command command. The authentication mean is based on the authentication tokens. Configuration reference CAAS_001 Initial conditions The test SSL_031... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.3.3 SSL_033 - Shared secret initialization (failure) | Test ID SSL_033 Test objectives The root accessor shall be able to be authenticated with the Accessor Authentication service by using: • The aAAS-OP-GET-CHALLENGE-Service-Command command. • The aAAS-OP-AUTHENTICATE-ACCESSOR-Service-Command command. The authentication mean is based on the authentication tokens. The test... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.3.4 SSL_034 - Capability of an accessor (secure SCL usage) | Test ID SSL_034 Test objectives The Accessor Authentication application shall send an aAAS-OP-GET-CAPABILITIES-Service- Command by using the secure SCL. The purpose of this test is to initiate a transmission using the secure SCL. AAS and AAS gate shall verify the following requirements related to the secure SCL: • The ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.4 Annexes - Accessor Authentication ASN.1 description | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.4.1 Annex - Certificates and Tokens | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.4.1.0 Certificates and Tokens | The Authentication token and certificates. -- ASN1START eAS-ATK-01 AuthenticationToken::={ tbsToken { version v1, subjectPublicKeyInfo { algorithm { algorithm { 0 0 } ETSI ETSI TS 103 999-1 V15.2.0 (2023-01) 256 Release 15 }, subjectPublicKey '0'B }, aATK-Content { aChallenge '00000000000000000000000000000000'H, aKey-S... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.4.1.1 Annex - Certificates with valid certification path | The certificates and the private keys are published for test only and shall not be used for an operational authentication. Only the private keys are published. The public keys are deduced from the private keys and the certificate can be generated by using the tooling available on the ETSI repository. ETSI-SSP-CI-privat... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.3.4.2 Annex - End of ASN.1 structure | The annex shall be appended at the end of the accessor authentication test descriptions. -- ASN1START END -- ASN1STOP 9.3.5 Requirements implicitly tested The following requirements identified in clause 5.5.3 are either generated from descriptive text. An explicit verification is not possible but with correct execution... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.4 Accessor authentication service procedure | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 9.4.1 Requirements implicitly verified | The following requirements identified in clause 5.5.4 are generated from descriptive text. An explicit verification is not possible but with correct execution of the related function the requirements can be handled as implicitly verified: RQ0904_001, RQ0904_002, RQ0904_003, RQ0904_004. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10 Test Descriptions: Communication layers above SCL | 10.1 Overview There are no requirements for test descriptions related to clause 10.1 of ETSI TS 103 666-1 [1]. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2 APDU protocol | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.1 Introduction | There are no requirements for test descriptions related to clause 10.2.1 of ETSI TS 103 666-1 [1]. 10.2.2 Command-response pairs 10.2.2.1 General definition There are no test descriptions related to clause 10.2.2.1 of ETSI TS 103 666-1 [1]. Requirement RQ1002_001 is unspecific and will be tested implicitly with SSP com... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.2.2 CLA byte | There are no test descriptions related to clause 10.2.2.2 of ETSI TS 103 666-1 [1]. Requirement RQ1002_002 is unspecific. Class byte handling will be tested implicitly with SSP command related tests if the UICC File System Service is supported. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.2.3 INS byte | There are no test descriptions related to clause 10.2.2.3 of ETSI TS 103 666-1 [1]. Requirement RQ1002_003 is implicitly tested with SSP command related tests if the UICC File System Service is supported. Requirement RQ1002_004 is unspecific. As no specific error handling is defined in ETSI TS 102 221 [7], the requirem... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.2.4 Status Word SW1 SW2 | There are no test descriptions related to clause 10.2.2.4 of ETSI TS 103 666-1 [1]. The requirements RQ1002_005 and RQ1002_006 are implicitly tested with SSP commands if the UICC File System Service is supported. ETSI ETSI TS 103 999-1 V15.2.0 (2023-01) 262 Release 15 10.2.3 SSP commands |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.3.0 Applicability of SSP commands | The tester shall successfully execute test descriptions as defined in ETSI TS 102 230-2 [6] related to the defined SSP commands if the UICC File System Service is supported. NOTE: Tests from ETSI TS 102 230-2 [6] identified as applicable for this clause are referenced as SSP_REF. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.3.1 Overview | There are no requirements for test descriptions related to clause 10.2.3.1 of ETSI TS 103 666-1 [1]. 10.2.3.2 EXCHANGE CAPABILITIES |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.3.2.0 Applicability of the EXCHANGE CAPABILITIES command | As the handling of the EXCHANGE CAPABILITIES command defined in clause 10.2.3.2 of ETSI TS 103 666-1 [1] has no equivalent in ETSI TS 102 230-1 [2] or ETSI TS 102 230-2 [6]. EXCHANGE CAPABILITIES command related tests are FFS. RQ1002_007, RQ1002_008 , RQ1002_009, RQ1002_010 and RQ1002_011 cannot be tested currently. 10... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.3.3.0 Applicability of the SELECT command | The provisions of ETSI TS 102 221 [7] shall apply. As there currently are no specific test descriptions for a SELECT command with P1 = ''04' as defined in clause 10.2.3.3 of ETSI TS 103 666-1 [1] and its sub-clauses, the "select by DF name" command related test in accordance with ETSI TS 102 230-2 [6], clause 6.6.6.1.1... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.4.0 Applicability of logical channel related commands | The provisions of ETSI TS 102 221 [7], clause 11.1.17 shall apply. The tester shall successfully execute test descriptions as defined in ETSI TS 102 230-2 [6] related to logical channels if the UICC File System Service is supported. NOTE: Tests from ETSI TS 102 230-2 [6] identified as applicable for this clause are ref... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.4.2 MANAGE CHANNEL | The provisions of ETSI TS 102 221 [7], clause 11.1.17 shall apply. Logical channel tests using the MANAGE CHANNEL command as defined in ETSI TS 102 230-2 [6], clause 6.6.8 have to be used. RQ1002_016 and RQ1002_17 are implicitly tested with the logical channel tests defined in ETSI TS 102 230-2 [6], clause 6.6.8. ETSI ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.5.0 Applicability of UICC file system commands | The provisions of ETSI TS 102 221 [7], clause 8.4 shall apply. The tester shall successfully execute test descriptions as defined in ETSI TS 102 230-2 [6] related to UICC file system commands if the UICC File System Service is supported. NOTE: Test from ETSI TS 102 230-2 [6] identified as applicable for this clause are... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.5.1 Overview | There are no test descriptions explicitly related to clause 10.2.5.1 of ETSI TS 103 666-1 [1]. 10.2.5.2 Methods for selecting a file The provisions of ETSI TS 102 221 [7], clause 8.4 shall apply. Methods for selecting a file tests as defined in ETSI TS 102 230-2 [6], clause 6.6.5 have to be used. Requirement RQ1002_018... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.6.0 Applicability of Card Application Toolkit services | The provisions of ETSI TS 102 221 [7], clause 7.4.2 shall apply if the SSP indicates the support of Card Application Toolkit according to ETSI TS 102 223 [9], The tester shall successfully execute test descriptions as defined in ETSI TS 102 230-2 [6] related to UICC file system commands if the UICC File System Service ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.7.0 Applicability of SSP suspension | If suspension is supported, the additional commands defined in Table 10.6 of ETSI TS 103 666-1 [1] shall be supported by the SSP. As the SSP suspension as defined in clause 10.2.7 of ETSI TS 103 666-1 [1] has no equivalent in ETSI TS 102 230-2 [6] SSP suspension related tests are FFS. RQ1002_033 can currently not be te... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.8.0 Applicability of APDU transfer over SCL | The provisions of ETSI TS 102 622 [5] shall apply if the SSP indicates the support of APDU transfer over SCL. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.8.1 Overview | There are no test descriptions explicitly related to clause 10.2.8.1 of ETSI TS 103 666-1 [1]. ETSI ETSI TS 103 999-1 V15.2.0 (2023-01) 265 Release 15 10.2.8.2 UICC APDU gate |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.8.2.0 Test Descriptions for the UICC APDU gate | There are no test descriptions explicitly related to clause 10.2.8.2 of ETSI TS 103 666-1 [1]. 10.2.8.2.1 UICC APDU overview The APDU transport over SCL shall use the HCP message structure as defined in ETSI TS 102 622 [5]. APDU gate related tests to verify RQ1002_034 and RQ1002_035 are FFS. Requirements RQ1002_036 (pa... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.2.8.2.4 State diagram for the UICC APDU gate | As the state diagram for the UICC APDU gate as defined in clause 10.2.8.2.4 of ETSI TS 103 666-1 [1] has no equivalent in ETSI TS 102 622 [5] the related tests are FFS. Tests to verify RQ1002_044 are FFS. ETSI ETSI TS 103 999-1 V15.2.0 (2023-01) 266 Release 15 |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.3 File system protocol | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.3.1 Tests referred to elsewhere | The test descriptions related to clause 10.3 of ETSI TS 103 666-1 [1] can be found in clause 6.6. 10.4 Transmission Control Protocol support |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.1 Configurations | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.1.1 CTCP_001-Generic TCP control service | Configuration ID CTCP_001 Configuration description Other host domain (Tester) otherhost domain (SUT) other host AA control application TCP control application gate host A AA control service TCP control service gate Administation administration gate Administration Administration gate AA data application TCP data applic... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.1.2 CTCP_002-Identity service | Configuration ID CTCP_002 Configuration description Other host domain (Tester) Other host domain (SUT) other host host A Administation administration gate Administration Administration gate Identity application Identity application gate Identity service Identity service gate |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.1.3 ASN.1 definitions | The following definitions are used for the procedures and the test descriptions. -- ASN1START TCPconfigurations { itu-t (0) identified-organization (4) etsi (0) smart-secure-platform (3666) part1 (1) test (2) tcp (6)} DEFINITIONS AUTOMATIC TAGS EXTENSIBILITY IMPLIED ::= BEGIN EXPORTS ALL; /* Imports */ IMPORTS UUID, Ve... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.2 Procedures | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.2.1 PTCP_021 - Open a pipe session with the Identity gate | Procedure ID PTCP_021 Procedure objectives The host A shall be able to open a pipe session to the identity service gate of the other host in the SUT. From the GATE_LIST registry, the UUID of the TCP control service shall be listed. The SUT may be one of the following hosts: • REE host • TEE host • MBM host If the test ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3 Test descriptions | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1 TCP Passive Connection opening | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.1 TCP_311 - Request to OPEN TCP Connection | Test ID TCP_311 Test objectives TCP control service gate shall open TCP connection and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between the TCP control... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.2 TCP_312 - Request to OPEN TCP Connection without network parameters | Test ID TCP_312 Test objectives TCP control service gate shall be able to open a TCP connection without network parameters (optional) and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.3 TCP_313 - Request to OPEN TCP Connection for WAN | Test ID TCP_313 Test objectives TCP control service gate shall be able to open a TCP connection for WAN access. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between the TCP control ap... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.4 TCP_314 - Request to OPEN TCP Connection for LAN | Test ID TCP_314 Test objectives TCP control service gate shall be open a TCP connection with on a LAN. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between the TCP control application... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.8 TCP_318 - Request to OPEN TCP Connection with FQDN | Test ID TCP_318 Test objectives If supported then TCP control service gate shall open TCP connection and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open betwe... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.9 TCP_319 - Request to OPEN TCP Connection with IPV4Adr address type | Test ID TCP_319 Test objectives TCP control service gate shall open TCP connection and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between the TCP control... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.1.10 TCP_3110 - Request to OPEN TCP Connection with IPV6 address type | Test ID TCP_3110 Test objectives TCP control service gate shall open TCP connection with IPV6 address and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open betw... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.2 TCP Active Connection opening | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.2.1 TCP_321 - Request to OPEN TCP Connection | Test ID TCP_321 Test objectives TCP control service gate shall open TCP connection in active mode and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.2.2 TCP_322 - Request to OPEN TCP Connection without network parameters | Test ID TCP_322 Test objectives TCP control service gate shall open TCP connection without network parameters (optional) and return response successful. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.2.3 TCP_323 - Request to OPEN TCP Connection for WAN | Test ID TCP_323 Test objectives TCP control service gate shall open TCP connection with a WAN access in active mode. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between the TCP contr... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.2.4 TCP_324 - Request to OPEN TCP Connection for LAN | Test ID TCP_324 Test objectives TCP control service gate shall open TCP connection with only with LAN access in active mode. Configuration reference CTCP_001 Initial conditions The PTCP_021 shall be successfully executed. One of following tests shall be executed: • PTCP_022. The pipe session shall be open between the T... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.3 TCP Connection closing | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.3.1 TCP_331 - TCP control application requests to close the connection | Test ID TCP_331 Test objectives The TCP control service shall be able to close connections, which are successfully created on the request of TCP control application. The test is valid whatever the host domain. Configuration reference CTCP_001 Initial conditions The following test shall be executed: • TCP_311. The pipe ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.4 TCP Status connection | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.4.1 TCP_341 - TCP control application requests the status of a connection | Test ID TCP_341 Test objectives The TCP control service able to request the status of a connection, which has been, successfully opened on the request of TCP control application. Configuration reference CTCP_001 Initial conditions One of the following test shall be executed: • TCP_311. The pipe session shall be open be... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.4.2 TCP_342 - TCP control application requests the status of a connection | Test ID TCP_342 Test objectives The TCP control service able to response the status of a connection, which has been, successfully opened on the request of TCP control application. If the connection drops the status shall indicate this new status. Configuration reference CTCP_001 Initial conditions One of the following ... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.5 TCP data exchange | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.5.1 TCP_351 - data stream exchange | Test ID TCP_351 Test objectives To data transfer by TCP control application, TCP control application shall notify to other host TCP control service gate by an event. Configuration reference CTCP_001 Initial conditions The following test shall be executed at least twice: • TCP_311. The pipe session shall be open between... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.6 TCP connection accept connection | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.6.1 TCP_361 - TCP control application accepts incoming connection | Test ID TCP_361 Test objectives The TCP control service (active mode) shall be able to accept an incoming connection. The test is valid whatever the host domain. Configuration reference CTCP_001 Initial conditions The following test shall be executed: • TCP_311. The pipe session shall be open between the TCP control ap... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7 TCP connection event | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.1 TCP_371 - TCP control application events - eREDIRECTION | Test ID TCP_371 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is a redirection. The test is valid whatever the host domain. Configuration reference CTCP_001 Initial conditions The following test... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.2 TCP_372 - TCP control application events - eUNREACHABLE | Test ID TCP_372 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the remote TCP endpoint is not reachable. The test is valid whatever the host domain. Configuration reference CTCP_001 Initial co... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.3 TCP_373 - TCP control application events - eIP-HEADER-WRONG | Test ID TCP_373 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the TCP adapter has detected a wrong IP header. The test is valid whatever the host domain. Configuration reference CTCP_001 Init... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.4 TCP_374 - TCP control application events - eTIMEOUT | Test ID TCP_374 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the port of the remote TCP endpoint is not accessible. The test is valid whatever the host domain. Configuration reference CTCP_0... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.5 TCP_375 - TCP control application events - eLINK-DROPPED | Test ID TCP_375 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the port of the remote TCP communication has dropped. The test is valid whatever the host domain. Configuration reference CTCP_00... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.6 TCP_376 - TCP control application events - eACCESS-TECHNOLOGY-ERROR | Test ID TCP_376 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the port of the remote TCP communication has dropped. The test is valid whatever the host domain. Configuration reference CTCP_00... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.7 TCP_377 - TCP control application events - eTERMINAL-BUSY | Test ID TCP_377 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the port of the remote TCP communication has dropped. The test is valid whatever the host domain. Configuration reference CTCP_00... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.8 TCP_378 - TCP control application events - eNETWORK-BUSY | Test ID TCP_378 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the port of the remote TCP communication has dropped. The test is valid whatever the host domain. Configuration reference CTCP_00... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.7.10 TCP_3710 - TCP control application events - eDNS-RESOLUTION-ERROR | Test ID TCP_3710 Test objectives The TCP control service shall notify the TCP control application gate when the TCP adapter has detected that an error occurred. The event occurs when there is the port of the remote TCP communication has dropped. The test is valid whatever the host domain. Configuration reference CTCP_0... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.8 ASN.1 stop | -- ASN1START END -- ASN1STOP |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.9 Requirements not testable, implicitly verified or verified elsewhere | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.9.1 Requirements not tested | The following requirements identified in clause 5.6.4 are either generated from descriptive text or not testable in the defined test environment. A verification of the listed requirements is not possible: RQ1004_008, RQ1004_043. |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.4.3.9.2 Implicit requirements | The following requirements identified in clause 5.6.4 are generated from descriptive text. An explicit verification is not possible but with correct execution of the related function the requirements can be handled as implicitly verified: RQ1004_001, RQ1004_002, RQ1004_003, RQ1004_004, RQ1004_005, RQ1004_006, RQ1004_00... |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.5.1 Configurations | |
3a2c501030e41dae8fd6f9bbdf81d510 | 103 999-1 | 10.5.1.1 CUDP_001 - UDP and Identity services | Configuration ID CUDP_001 Configuration description Other host domain (Tester) Other host domain (SUT) Other host AA application UDP application gate Other host A AA service UDP service gate Administation administration gate Administration Administration gate Identity application Identity application gate Identity serv... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.