hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.7.2.2 Searching mode request | The access rights procedure triggered by the user on the PT causes it to actively search for an FT broadcasting 'Access rights requests supported' capability bit (Higher layer capabilities bit a44 = 1, see ETSI EN 300 175-5 [5], clause F.1 and ETSI EN 300 444 [9], annex A. The searching mode shall be limited by the tim... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.7.2.3 Base station limited registration mode | The FP shall have a physical or a logical button to trigger the access rights procedure. When the button is pressed on the FT, the FT shall set its broadcasting 'Access rights requests supported' capability bit to enable the on-air subscription (see clauses 7.6.17.2 and 7.8.2). When the access rights procedure is succe... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.7.2.4 Registration user feedback | In order to improve the security, the FT and the PT shall give a feedback to the user of the registration process through a user interface (for example a display, an LED or a buzzer). The feedback given on the user interface of the PT and the FT shall be as a minimum the following status of the registration process wit... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.7.3 Head tracking | |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.7.3.1 General | The head tracking feature adds an uplink data channel to provide the user's head orientation and movement to the FT application. Support of the head tracking channel shall be indicated by the PT in the terminal capabilities (see clause 7.6.15) using the <<IWU-to-IWU>> IE (see clause A.2.1). If the FT supports the head ... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8 Management procedures | |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.1 General | This clause specifies the additional management procedures required for advanced audio services which are not described in ETSI EN 300 444 [9] (GAP), clause 13, or which incorporate modifications to the GAP specification. The advanced audio profile PT shall be capable of reading and interpreting at least the following ... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.2 Broadcast attributes management | |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.2.1 Procedure | NOTE: This procedure description replaces clause 13.6 of ETSI EN 300 444 [9] (GAP). RFPs belonging to the same location area shall broadcast the same values of higher layer attributes (see ETSI EN 300 175-5 [5], annex F) at any given time. The advanced audio profile PT shall be capable of reading and interpreting at le... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.2.2 Higher layer capabilities | Table 64 shows the higher layer capabilities that shall be understood by the PT. ETSI ETSI TS 103 706 V1.1.1 (2022-01) 100 Table 64: Broadcast attributes interpretation by the PT: Higher layer capabilities Bit Number Attribute Value Note a36 DECT Standard authentication (DSAA) required 0,1 a37 DECT Standard Cipher (DSC... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.2.3 Extended higher layer capabilities | Table 65 shows the extended higher layer capabilities that shall be understood by the PT. Table 65: Broadcast attributes interpretation by the PT: Extended higher layer capabilities Bit Number Attribute Value Note a41 Asymmetric bearers supported 1 |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.2.4 Extended higher layer capabilities (part 2) | Table 66 shows the extended higher layer capabilities (part 2) that shall be understood by the PT. Table 66: Broadcast attributes interpretation by the PT: Extended higher layer capabilities (part 2) Bit Number Attribute Value Note a42 Support of "Re-keying" and "early encryption" 0,1 See ETSI EN 300 444 [9], clauses 8... |
a0fad7efdd1a46de4db9258537ad4810 | 103 706 | 7.8.2.5 Extended higher layer capabilities (part 3) | Table 67 shows the extended higher layer capabilities (part 3) that shall be understood by the PT. ETSI ETSI TS 103 706 V1.1.1 (2022-01) 101 Table 67: Broadcast attributes interpretation by the PT: Extended Higher layer capabilities (part 3) Bit Number Attribute Value Note a36 Support of advanced audio profile micropho... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 1 Scope | The present document defines a PP-Module for Consumer Mobile Device (CMD) which adds additional security requirements on preloaded applications and the functional capabilities (objectives and security functional requirements) that are required to mitigate threats from poor programming of those applications. The present... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 2 References | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 2.1 Normative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which a... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 2.2 Informative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks i... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 3 Definition of terms, symbols and abbreviations | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 3.1 Terms | For the purposes of the present document, the following terms apply: consumer mobile device: user customizable device utilizing an operating system, supporting installation and maintenance of applications, with wireless internet connectivity, high computation power and rich user interface, used for various purposes by ... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 3.2 Symbols | Void. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 3.3 Abbreviations | For the purposes of the present document, the following abbreviations apply: ADP Application Distribution Platform API Application Program Interface CC Common Criteria CEM Common Evaluation Methodology CMD Consumer Mobile Device ECD Extended Component Definition OS Operating System PP Protection Profile SAR Security As... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4 TOE Definition | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.1 TOE Overview | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.1.1 Introduction | This PP-Module introduces additional requirements on applications available on the CMD after the initial CMD setup is complete. The applications covered by these requirements are divided into preloaded and preinstalled applications. The requirements for preloaded applications are focused on defining security requiremen... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.1.2 Preloaded Application Requirements | This PP-Module introduces additional security requirements to the TOE as defined in ETSI TS 103 732-1 [6] specifically related to preloaded applications in the CMD. These additional requirements provide checks to the design of the preloaded applications to protect user and TSF data stored in the TOE. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.1.3 Preinstalled Application Requirements | This PP-Module introduces additional security assurance requirements to the TOE as defined in ETSI TS 103 732-1 [6] specifically related to some preinstalled applications in the CMD. The requirements for preinstalled applications are focused on the permissions assigned to such applications. Assigning system permissions... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.2 Usage and Major Security Features | This is a Protection Profile Module (PP-Module) used to extend a Base-PP for a consumer mobile device to provide additional security requirements on preloaded applications. As these applications are not explicitly chosen by the user, the manufacturer can provide additional assurance to the trustworthiness of the CMD by... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.3 PP-Module Identification | PP-Module Title ETSI TS 103 732-4: "Consumer Mobile Device; Part 4: Preloaded Applications Protection Profile Module". PP-Module Version 1.1.1 PP-Module Date June 11, 2024 |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.4 Base-PP Identification | • This PP-Module relies on the following Base-PP: Base-PP Short Name [CMD PP] Base-PP Title ETSI TS 103 732-1: "Consumer Mobile Device; Part 1: Base Protection Profile". Base-PP Version 2.1.2 Base-PP Date November 16, 2023 |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 4.5 Conformance Claim | The present document: • claims conformance to CC V3.1 Release 5 [1], [2], [3] and the CC and CEM addenda [5]; • is CC Part 2 [2] extended; • assurance requirements are inherited from the Base-PP augmented with APA_LST.1; • does not claim conformance to any other PP. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 5 Security Problem Definition | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 5.1 Assets and interfaces of the TOE | The TOE of this PP-Module is the set of preloaded applications and preinstalled applications with system permission on the CMD. The preinstalled applications with system permission are documented, but excluded from the scope of application testing. This PP-Module introduces new security requirements to the CMD to manag... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 5.2 Threat agents and threats | The following threat agent in addition to those in the Base-PP is identified as below: • TA.FLAWPREAPP: a poorly programmed application that is installed by the TOE manufacturer as part of the system software and therefore has access to the application interface, and possibly to the local wireless interface and/or the ... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 5.3 Organizational Security Policies | There are no organizational security policies defined for the TOE. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 5.4 Assumptions | There are no assumptions defined for the TOE. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 6 Security Objectives | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 6.1 Security Objectives for the TOE | O.LIMITED_PERMISSIONS - The TOE shall provide system permissions only to the preinstalled applications under TOE manufacturer control. O.OLD_APP_WARNING - The TOE shall provide the user with notifications when uninstalling updates from a preloaded application contained in the system software when an older version of th... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 6.2 Security Objectives for the Operational Environment | There are no security objectives for the operational environment. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 6.3 Security Objectives Rationale | Threat Rationale T.APP_REVERSION This threat is countered by O.OLD_APP_WARNING by ensuring the user is aware a preloaded application will be replaced by an older version if the preloaded application is part of the system software. T.PERMISSIONS This threat is countered by O.LIMITED_PERMISSIONS by ensuring that preinsta... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7 Extended Components | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7.1 Definitions | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7.1.1 Definition of the Class FAP: Applications | This class of requirements is focused on the risks associated with improperly designed applications. Applications are separate from the main operating system, though they may be included as part of the functionality provided on a consumer mobile device. Applications can provide unique attack vectors based on how they a... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7.1.2 Definition of the family Application Lifecycle (FAP_LFC) | Family Behaviour Applications need to be maintained to ensure flaws are corrected. This family defines requirements around how applications are updated and the actions that are taken when those updates are uninstalled (by the user). Component Levelling FAP_LFC.1 Preloaded applications are required to be updated to ensu... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7.1.3 Definition of the family Application Permissions (FAP_PRM) | Family Behaviour While all applications will have some set of permissions assigned (to access TOE services), some permissions are considered more dangerous than others in terms of protecting both the TOE and user data. This family defines how those permissions named system permission should be restricted. Component Lev... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7.1.4 Definition of the family Application Risk (FAP_RSK) | Family Behaviour Applications are subject to specific risks related to common coding practices. Following best practices for application development ensures that core capabilities of the applications are correct. FAP_PRM: Application Permissions 1 ETSI ETSI TS 103 732-4 V1.1.1 (2024-06) 16 Component Levelling FAP_RSK.1... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 7.1.5 Definition of the Identification of applications on device (APA_LST) | Enumerating the preloaded and preinstalled applications with system permission is necessary to ensure how the operating system is separated from applications that are bundled as part of the system software. This family requires the developer to specify the applications from the TOE manufacturer that are available on th... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8 Security requirements | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.1 Conventions | The following conventions are used for the completion of operations defined in the SFRs: • Unaltered SFRs are stated in the form used in Part 2 [2] or their Extended Component Definition (ECD). • Refinement made in the PP: the refinement text is indicated with bold text and strikethroughs. ETSI ETSI TS 103 732-4 V1.1.1... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.2 ETSI TS 103 732-1 Security functional requirements | There are no modifications to the SFRs from the Base-PP. |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.3 TOE Security functional requirements | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.3.1 Applications (FAP) | FAP_LFC.1 Preloaded application updates FAP_LFC.1.1 The TSF shall ensure that preloaded applications are updated by [selection: using an ADP and system software updates (to the version maintained in firmware), only by system software updates]. FAP_LFC.2 Preloaded application uninstall FAP_LFC.2.1 The TSF shall warn the... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.3.2 Application Risk (FAP_RSK) | The Application Risk requirements defined here are targeted specifically at preloaded (not preinstalled) applications on the CMD. While the requirements are for generic applications, here they are specifically used for preloaded applications, and so all references to applications here are for preloaded applications. FA... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.4 Security assurance requirements | In addition to the security assurance requirements defined in the Base-PP, the following assurance requirement is defined here (APA_LST.1). APA_LST.1 Application listing This component requires the TOE developer to provide information on the applications which are available on the CMD after the initial CMD setup is com... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.5 Security requirements rationale | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.5.1 Rationale for choosing the SARs | This PP-Module defines an additional security assurance requirements family in addition to what is defined in the Base- PP. This class specifically adds activities around the preloaded and some preinstalled applications included in the TOE boundary for the TOE developer to complete. In combination with the SARs from th... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.5.2 The SFRs meet all the security objectives for the TOE | Security Objective Rationale O.OLD_APP_WARNING This objective is achieved by FAP_LFC.2 which specifies how users are warned when preloaded applications contained in the system software have their updates removed. O.LIMITED_PERMISSIONS This objective is achieved by FAP_PRM.1 by specifying system permissions and then exc... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.5.3 Dependency analysis | SFR Dependency Rationale FAP_LFC.1 - FAP_LFC.2 - FAP_LFC.3 - FAP_PRM.1 - FAP_RSK.1 - FAP_RSK.2 - FAP_RSK.3 FAP_RSK.2 Included in the PP-Module FAP_RSK.4 - FAP_RSK.5 FAP_RSK.4 Included in the PP-Module FAP_RSK.6 - FAP_RSK.7 - FAP_RSK.8 - FAP_RSK.9 - FAP_RSK.10 - ETSI ETSI TS 103 732-4 V1.1.1 (2024-06) 24 |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.6 Consistency rationale | |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.6.1 TOE type consistency | When this PP-Module is used to extend the ETSI TS 103 732-1 [6] Base-PP, the TOE type for the overall TOE is still a consumer mobile device. This PP-Module adds requirements on the preloaded and some preinstalled applications included in the consumer mobile device. The TSF boundary is not extended, but provides more de... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.6.2 Consistency of Security Problem Definition | The threats and assumptions defined by the PP-Module are consistent with those defined in the ETSI TS 103 732-1 [6] Base-PP as follows: PP-Module Threats Consistency Rationale T.APP_REVERSION The threat of downgrading system software applications is a subset of the T.NEW_ATTACKS threat in the Base-PP. T.PERMISSIONS Thi... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.6.3 Consistency of Objectives | The objectives for the preloaded applications are consistent with the ETSI TS 103 732-1 [6] Base-PP based on the following rationale: PP-Module TOE Objectives Consistency Rationale O.LIMITED_PERMISSIONS This TOE Objective is related to the O.SELF_PROTECTION objective in the Base-PP. O.OLD_APP_WARNING This TOE Objective... |
102de47c3ca1662f5b8e7c03993c2ccd | 103 732-4 | 8.6.4 Consistency of Requirements | The TOE of this PP-Module is comprised of all the preloaded and TOE manufacturer preinstalled applications described in clause 4.1. The preloaded and TOE manufacturer preinstalled applications comprise both core functionality of the mobile device as well as additional functionality added by the TOE manufacturer. This P... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 1 Scope | The present document specifies a conformance assessment methodology for consumer IoT devices, their relation to associated services and corresponding relevant processes against ETSI TS 103 645 [1]/ETSI EN 303 645 [2], addressing the mandatory and recommended provisions as well as conditions and complements of ETSI TS 1... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 2 References | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 2.1 Normative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which a... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 2.2 Informative references | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks i... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 3 Definition of terms, symbols and abbreviations | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 3.1 Terms | For the purposes of the present document, the terms given in ETSI TS 103 645 [1], ETSI EN 303 645 [2] and the following apply: assess: generate a result by analysis using evaluator expertise NOTE: The statement that uses this verb identifies what is analysed and the properties for which it is analysed. The combination ... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 3.2 Symbols | Void. ETSI ETSI TS 103 701 V2.1.1 (2025-05) 13 |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 3.3 Abbreviations | For the purposes of the present document, the following abbreviations apply: AES Advanced Encryption Standard API Application Programming Interface ARM Advanced RISC Machines ARP Address Resolution Protocol BL Boot Loader BLE Bluetooth® Low Energy BSI Federal Office for Information Security (Germany) CC Common Criteria... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4 Conformance assessment methodology | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.1 Overview and document structure | Clause 4.2 describes the relevant roles and objects for the conformance assessment procedure. Clause 4.3 describes the assessment procedure. Clause 4.4 describes how to declare the conformity of the consumer IoT device to the provisions of ETSI TS 103 645 [1]/ETSI EN 303 645 [2] using the associated Implementation Conf... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.2 Roles and objects | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.2.1 Device Under Test (DUT) | The Device Under Test (DUT) is a specific consumer IoT device (as defined in ETSI TS 103 645 [1]/ETSI EN 303 645 [2]), which is subject to assessment against the provisions of ETSI TS 103 645 [1]/ETSI EN 303 645 [2]. TSOs address the DUT functionality, its relation to associated services and development/management proc... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.2.2 Supplier Organization (SO) | The Supplier Organization (SO) requests a specific DUT to be tested against the provisions of ETSI TS 103 645 [1]/ETSI EN 303 645 [2]. The SO can be the developer, manufacturer, vendor or distributor of the DUT. The SO usually serves as single point of contact to the TL, and is expected to coordinate with parties acros... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.2.3 Test Laboratory (TL) | The Test Laboratory (TL) is (a defined part of) an entity that carries out the conformance assessment of a DUT. The relation to associated services and development/management processes of the DUT are partially also considered in the assessment (see ETSI TS 103 645 [1]/ETSI EN 303 645 [2]). TL 1st Party ●Part of the Sup... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.3 Assessment procedure | Figure 4: Phases of the assessment procedure (informative example) The present clause provides an abstract procedure for performing the conformance assessment against the provisions of ETSI TS 103 645 [1]/ETSI EN 303 645 [2]. The assessment procedure is performed by applying the following phases, which are illustrated ... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.4 Implementation Conformance Statement (ICS) | The Implementation Conformance Statement (ICS) is made by the SO, of the capabilities implemented in or supported by the DUT on the base of the provisions from ETSI TS 103 645 [1]/ETSI EN 303 645 [2]. In the ICS the SO shall claim all provisions which are the object of the assessment. This is done by a written "Yes" in... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.5 Implementation eXtra Information for Testing (IXIT) | The Implementation eXtra Information for Testing (IXIT) contains additional necessary information to perform the assessment. It is the basis for grey-box testing methodology which is used for the assessment and provides some design details for the TL. The IXIT pro forma is provided in clause A.3. This pro forma describ... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.6 Assignment of verdicts | In general, there are three kinds of verdicts: an overall verdict, test group verdicts and test case verdicts. The overall verdict is i.a. composed of the results of the applied test groups (the test group verdicts). The test group verdicts are in turn i.a. composed of the results of the contained test cases (the test ... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.7 Usage of external evidences | Existing security certifications or third-party evaluations of parts of the DUT may be used partially as evidence for the conformance to reduce the effort of the assessment. In this case the SO shall announce in the "Detail" column of the addressed provision in the ICS that conformance is already assessed combined with... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 4.8 Assessment scheme amendments | An assessment scheme typically provides a frame for the performance of an assessment. ETSI TS 103 645 [1]/ETSI EN 303 645 [2] and the present document can be used by an assessment scheme, such as a manufacturer scheme, a self- assessment scheme or a certification scheme. Figure 5 illustrates the role of an assessment s... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5 Test scenarios for consumer IoT | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.0 TSO 5.0: Reporting implementation | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.0.1 Test group 5.0-1 | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.0.1.0 Test group objective | The test group addresses the provision 5.0-1. Manufacturer Scheme (e.g. Internal Procedure) Self Assessment Scheme (e.g. IoT Label) Certification Scheme (e.g. IoT Certificate) Assessment Scheme* Provisions (normative) ICS ETSI EN 303 645 ETSI TS 103 645 / Test Groups (normative) IXIT ETSI TS 103 701 Tester Expertise Cr... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.0.1.1 Test case 5.0-1-1 (conceptual) | Test purpose The purpose of this test case is the conceptual assessment of the justifications for recommendations that are considered to be not applicable for or not fulfilled by the DUT. Test units a) The TL shall check whether a justification is given in the ICS for each recommendation that is considered to be not ap... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1 TSO 5.1: No universal default passwords | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.1 Test group 5.1-1 | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.1.0 Test group objective | The test group addresses the provision 5.1-1. This test group addresses all states of the DUT with the exception of factory default. |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.1.1 Test case 5.1-1-1 (conceptual) | Test purpose The purpose of this test case is the conceptual assessment of the password-based authentication mechanisms used to authenticate users against the DUT or for machine-to-machine authentication. Test units a) The TL shall assess for all password-based authentication mechanisms in IXIT 1-AuthMech, that are use... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.1.2 Test case 5.1-1-2 (functional) | Test purpose The purpose of this test case is the functional assessment of the password-based authentication mechanisms used to authenticate users against the DUT or for machine-to-machine authentication concerning the completeness of the IXIT documentation a), the passwords defined by the user b) and the generation me... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.2 Test group 5.1-2 | Test group objective The test group addresses the provision 5.1-2. Test case 5.1-2-1 (conceptual) Test purpose The purpose of this test case is the conceptual assessment of the generation mechanisms of pre-installed passwords. Test units a) The TL shall assess for each authentication mechanism in IXIT 1-AuthMech, that ... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.2A Test group 5.1-2A | 5.1.2A.0 Test group objective The test group addresses the provision 5.1-2A. 5.1.2A.1 Test case 5.1-2A-1 (conceptual) Test purpose The purpose of this test case is the conceptual assessment whether passwords are used for machine-to-machine authentication. Test units a) The TL shall assess for each authentication mechan... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.3 Test group 5.1-3 | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.3.0 Test group objective | The test group addresses the provision 5.1-3. According to ETSI TS 103 645 [1]/ETSI EN 303 645 [2] best practice cryptography is defined as cryptography that is suitable for the corresponding use case and has no indication of a feasible attack with current readily available techniques. In the present test group, the te... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.3.1 Test case 5.1-3-1 (conceptual) | Test purpose The purpose of this test case is the conceptual assessment of the cryptography used for the authentication mechanisms used to authenticate users against the DUT or for machine-to-machine authentication concerning the use of best practice cryptography (a-c) and the vulnerability to a feasible attack d). Tes... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.3.2 Test case 5.1-3-2 (functional) | Test purpose The purpose of this test case is the functional assessment of the cryptography used for authentication mechanisms used to authenticate users against the DUT or for machine-to-machine authentication. Test units a) For each authentication mechanism in IXIT 1-AuthMech, that is used to authenticate users again... |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.4 Test group 5.1-4 | |
c3dea0100f00b9b204a008ec459da259 | 103 701 | 5.1.4.0 Test group objective | The test group addresses the provision 5.1-4. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.