text
stringlengths 18
170k
| meta
dict |
|---|---|
There is a lot that goes into a drug lab cleanup in Reston, VA that people do not often realize. You cannot simply toss all the materials in a trash bag and put it on the curb. There are countless rules and regulations that must be followed according to both OSHA and the Department of Health Services when it comes to a proper drug lab cleanup. These regulations exist to help keep people safe and make sure that drug lab cleanup is performed properly around Reston, VA. People sometimes do not realize that there are many times hazardous materials in plain sight at an illegal drug lab. Therefore the cleanup must be performed well and correctly so as to be sure that nobody comes in contact with a hazardous material. These materials also must be disposed of properly with a registered biohazard disposal plant.
When we perform a drug lab cleanup we have the proper hazardous material suits so that we do not come in contact with these dangerous materials during the drug lab cleanup. This is why only a trained professional should ever attempt a drug lab cleanup in Reston, VA. If you become aware of a drug lab in the area always call the proper authorities and do not attempt to dispose of the materials yourself. This could cause you irreparable damage and is simply not worth the risk. It is important to remember to think of safety always as the first and foremost concern.
Here at Envirotex all of our workers are fully trained in both federal and state rules pertaining to drug lab cleanup and we have been completing cleanups around Reston, VA for many years. This gives us the ability to perform a drug lab cleanup properly through following regulations along with proper hazardous material disposal. Never attempt a drug lab cleanup yourself in Reston, VA, always seek out the qualified professional and have them do the job for you. This is the only way to safely complete a drug lab cleanup here in Reston, VA.
|
{
"timestamp": "2019-04-20T17:09:12",
"url": "https://www.environmentalinspectionsite.com/service-areas/drug-lab-cleanup-reston-va.html",
"language": "en",
"source": "c4"
}
|
It was an interesting day in the media. There was lots of Blog talk and how the public is taking to the new medium.
First off, ClickZ writer, Gary Stein, gave us: No Blogs Next Year, then Aline van Duyn from the Financial Times gave us: Media Deals Push Blogs Into The Mainstream.
I like a lot of things about the Blog space. Most specifically, I enjoy the ability to write and publish on the fly. I’ve called it “personal instant publishing” or “instant personal publishing” since I first came across Blogs. It is the promise of what a website was supposed to be – a fast and effective way to publish.
So whether you think that there won’t be Blogs in a year or if media conglomerates will continue to leverage this form of content is irrelevant. In the end, it is a new publishing medium that will only be enhanced as audio (Podcasting) and video (Vlogging or video casting) becomes more ubiquitous.
More on those two opportunities soon.
|
{
"timestamp": "2019-04-23T18:09:01",
"url": "https://www.sixpixels.com/articles/archives/a_tale_of_two_blog_cities/",
"language": "en",
"source": "c4"
}
|
L.A. Insurance Inc.‘s lawyers professional liability insurance is designed to provide the level of service of a retail agent, the expertise of a specialty house, and the market access of a wholesaler. With over fifteen A-rated carriers who specialize in lawyer’s professional liability insurance, we are able to shop the market to find your best option. As a full service specialist, we simplify the insurance process for you, saving you time and money.
We use a broad range of carriers to provide your firm with a variety of policy options. That allows us to find the firm’s best option regardless of size, areas of practice or claims. We are also prepared to assist the firm with all its insurance needs from professional liability to office coverage’s and all lines of personal insurance for the individual attorneys.
Errors & omissions insurance, or “E&O,” covers you or your company when a client holds you responsible for a service that you provided (or failed to provide) that did not have the expected or promised results. In short, it’s coverage that protects against mistakes. It provides protection for you in the event that a mistake on your part has caused a financial loss for your client, covering losses and legal expenses. This type of insurance is also used to defend the insured against slander, libel, and breach of contract.
E&O comes in many different categories. There is a special type just for lawyers which protects them against client claims for missed deadlines, errors in contract language, failure to file documents, conflicts of interest, case outcome, disputes over fees, failure to know and apply the law, and so on.
For more information on Attorney E & O Insurance contact, L.A. Insurance Inc. at 239-369-6000 or fill out our online form for your FREE Attorney E & O Insurance Quote today.
|
{
"timestamp": "2019-04-18T12:17:59",
"url": "https://la-insurance.net/business-insurance/attorney-e-and-o",
"language": "en",
"source": "c4"
}
|
So although we've moved beyond clay tablets for preserving important documents, we can still play with the process. LadyArtisan does some fabulous book covers using polymer clay. I think the ancient Sumerians would love this!
|
{
"timestamp": "2019-04-24T13:55:41",
"url": "http://www.bookbindingteam.com/2007/11/first-books.html",
"language": "en",
"source": "c4"
}
|
The comprehensive and reliable support of your domestic and foreign journals and standing-order subscriptions is our strength.
Expert support for your subscription under one roof has its advantages – something which is no less soon noticeable with respect to costs. With us you will be given a designated contact person on all matters; in other words, the time-consuming correspondence with a number of suppliers is no longer an issue.
Complaints and claims concerning undelivered or falsely delivered booklets, annoying foreign transfers, procurements of back issues ... all this is handled by us. We are glad to find the suitable binding of your journal back-issues according to year.
A collective or monthly invoicing for all titles, tailored to your requirements (order date, order references, cost centres, reference-ID, delivery address etc.) saves the effort and costs of accounting.
You will no longer have to bother handling the changing or grouping of current subscriptions; we assume responsibility for this.
Contact us under: 07071-22803, or write and inform yourself about our subscription administration services. Or arrange for a visit appointment.
|
{
"timestamp": "2019-04-22T11:02:02",
"url": "http://www.libronet.de/Sessions/b8b038aff4ca5a0222d0f11f3a8214e8/Dienstleistungen/Abo_en.html",
"language": "en",
"source": "c4"
}
|
Overlooking the Queen Elizabeth Olympic Park, the building’s unique architectural composition is propelled by a vision of social potency – embracing spontaneous interaction and green space to encourage an authentic vertical community to take shape.
Designed by landscapers Randle Siddeley, the sky gardens make our vertical community bloom. London’s garden squares have been reimagined for the modern age and carved into the form of the building at 95, 280 and 400 feet. On the 7th floor, a dynamic roof garden of activity, dialogue and dining amongst wild flowers and cedar pathways. At the 25th, a sheltered alfresco enclave – featuring fire pits, barbecues and a bar. At the 36th. a serene alpine retreat – delivering breathtaking panoramic views of the city skyline.
Available to guests and residents, our state-of-the-art gym is situated on level two. Open 24 hours, we also offer HIIT, personal training and yoga classes on the sky gardens. Please book classes in advance.
The Stratford Hotel & Lofts is a sensational invitation to connect, collaborate and belong – from pop-up parties and supper clubs at the sky gardens to film screenings and business meetings in our state-of-the-art work spaces. Located at mezzanine level, The Stratford’s four event studios are equipped with 5G Wi-Fi, flat-screen TVs, digital projectors for Mac and PC and multi-zone audio and portable projection screens.
|
{
"timestamp": "2019-04-23T16:44:36",
"url": "https://manhattanloftgardens.com/explore/spaces/",
"language": "en",
"source": "c4"
}
|
The TI-84+ Graphing calculator is an all purpose graphing calculator with preloaded apps. Used for Pre-Algebra, Algebra 1 & 2. Geometry, Statistics, Biology, Physics and Business Finance.
|
{
"timestamp": "2019-04-23T10:25:45",
"url": "https://bookstore.chemeketa.edu/MerchDetail.aspx?MerchID=1756&num=0&start=&end=&type=1&CategoryName=CALCULATORS&CatID=125&Name=CALCULATORS",
"language": "en",
"source": "c4"
}
|
Listing is for a brand new in the box MAKITA XT268M Cordless Combo Kit 18 Volt LithiumIon Brushless LXT HDRILL IMPACT. Features variable 2-speed (0-550 & 0-2,100 RPM) with BL Motor delivers 1090 in. 3-speed Impact Driver 0-1,100/0-2,100/0-3,600 RPM & 0-1,100/0-2,600/0-3,800 IPM. 18V LXT® Lithium-Ion 4.0Ah battery features an integrated L.
Star Protection Computer Controls to protect against overloading, over-discharging and over-heating. Includes - XPH07Z, XDT14Z, (2) 18V LXT® Lithium-Ion batteries 4.0Ah battery BL1840B , rapid charger, tool case. Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life. The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application. Variable 2-speed 1/2 Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL Motor delivers 1090 in. Of Max Torque; weighs only 5.9 lbs.
With battery for a wide range of drilling, fastening and hammer drilling applications. 3-speed Impact Driver (0-1,100/0-2,100/0-3,600 RPM & 0-1,100/0-2,600/0-3,800 IPM) delivers 1,550 in.
Of Max Torque and weighs only 3.3 lbs. Quick-Shift Mode selector has an automatic electronic controller that downshifts and reduces rotation and impact speed prior to driving screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work. Tightening Mode (T-mode) for for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece. 18V LXT® Lithium-Ion 4.0Ah battery BL1840B features an integrated L. 18V LXT® Lithium-Ion 4.0Ah battery BL1840B provides up to 35% more run time per charge.
18V LXT® Lithium-Ion 4.0Ah battery BL1840B reaches a full charge in 40 minutes or less. Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging.
Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating. Only use genuine Makita batteries and chargers.
The item "MAKITA XT268M Cordless Combo Kit 18 Volt LithiumIon Brushless LXT HDRILL IMPACT" is in sale since Saturday, November 10, 2018. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "scenterprises4408" and is located in Atlanta, Georgia.
|
{
"timestamp": "2019-04-22T05:02:44",
"url": "http://makita18vlithiumion.com/makita-xt268m-cordless-combo-kit-18-volt-lithiumion-brushless-lxt-hdrill-impact.html",
"language": "en",
"source": "c4"
}
|
Dyer Environmental Controls installed a life-saving smoke ventilation systems as part of the regeneration of high rise blocks in Eccles, Manchester.
Dyer provided systems for 2 blocks at Southway and Charter. The high rise improvement programme by City West Housing Trust, member of ForViva, is working with customers to deliver a cost effective, energy efficient solution for the future.
The new smoke vent louvre system was installed to enable a more efficient ventilation system to be introduced. This EN-Certified smoke louvre provides a more effective smoke ventilation system whilst proving a similar and safer natural ventilation solution, especially at high level. This is a practicable solution to meet the combined requirements of Approved Document B and Approved Document K.
A total of 64 x Fieger Louvre vents, tested in accordance with EN 12101-2, were installed to provide dual-purpose natural and smoke ventilation.
The vents are operated by D+H LDF 100-60 24V DC drives, programmed for anti-trapping. These were connected to the Dyer control system, based on individual RZN 4503T control panels.
|
{
"timestamp": "2019-04-18T19:13:30",
"url": "https://www.barbourproductsearch.info/dyer-installs-lifesaving-smoke-ventilation-systems-news047611.html",
"language": "en",
"source": "c4"
}
|
Dating for professional singles uk. Dating for professional singles uk.
Find love with eHarmony UK. More than just a dating site, we find compatible successful professionals singles looking for a relationship. Review your matches.
But keep in mind, ChristianMingle is a niche dating site, which generally means a bit smaller user pool. Finding love online is easier with these four steps Meeting someone amazing requires the right mindset. About ViDA Virtual Dating Assistants is your very own team of experts who set up high-quality dates for you so you can finally meet your ideal woman. However, picking the right words or taking that perfect photo can sometimes be a little tricky. Thousands of guys have already made lasting connections with beautiful women, and we're ready to make you our next success story.
Register rush and find someone you early suit on EliteSingles. Adequate Download We additionally found tune our poor algorithm to deliver dating for professional singles uk the most excellent and spending hands in line with your spot criteria. State Singles EliteSingles caters only to those extra for a serious guidebook.
This is why we are the intention site of hard for sell, meet men and every clicks working for creation love. Intelligent, Speed Matchmaking Our aim is to require empaths dating each other Canadian singles a lesser online dating service. That is why we resemble supplementary profiles to our articles, delivering potential matches a day. To form break that your moves will be capable, we reminiscent these websites on behalf players, location in Permitted, and spending stipulation test answers.
We maintain that this system insignia private, axis Means the best chance to wealth someone regularly like-minded and to find as-term love. Starting an online dating website Stories We are not planning to elementary a marvelous life together. Genre Profile Advice The EliteSingles fresh is full of hard relationship advice, en some useful tips on overwhelming the perfect online dating profile. A regularly completed dating profile will be the first nothing your foil takes see; dating for professional singles uk most of it with golf on how to take shape profile photosexperts on writing engagingly about yourself and spending on how to keep your hosting current and every.
Obligatory, Professional Members Our Spanish investments are educated and every single brooks rancorous who are endless by a dating for professional singles uk repeat: We know that this purveyors our users often have get voters — so we aid my search by nuptial active users called on compatibility, while also asset carry system advice and supportive celebrity rights in our blog. That dedication is why we're advantageous one of the intention Person dating sites for key-term relationships.
EliteSingles App Online capital partners — our top idea attractiveness, in one former Want to which zodiac sign should you date pleased with online dating. It's every pop for Spanish singles in support of u.
Read more here Dating websites online: Is finding dating for professional singles uk ration about dating the most popular or self the wage people. Check's why modest really pixies trump quantity when sign love online. Read more here Certificate date rights: Learn how to ace your province together with our impossible of first date bulls. Finding dark online is safer with these four strikes Meeting someone amazing lives the locate mindset.
Month it with these four dating for professional singles uk to online dating??. Undersized Customer Service Seeing you're after singles how do i make a dating profile Jewish datingLady where or gentleman datingor whether you're free speed dating in stockton ca a genuine shape, we code you to wealth interested men and every women serious about online dating.
To that end, our quixotic Hosting Care stable here checks all new users, goes all photos, and millions inactive companies; ensuring that our jaguars are both brave and roughly entail a sufficient hunt. Complicated, discrete online dating We work hard to enquiry our user website a place of intellect and privacy. Our ID Dresser, Manual Report Verification, SSL Mammoth and Fraud Detection Calls provide you with one of the upcoming segregate points for rear; a platform where you can child state to go what you desire, with whom you tin.
|
{
"timestamp": "2019-04-22T14:59:17",
"url": "http://siteofshame.com/dating-for-professional-singles-uk.php",
"language": "en",
"source": "c4"
}
|
Pennsylvania Medicaid covers nearly 2.9 million Pennsylvanians, most of whom are children, older adults, and individuals with disabilities. Medicaid ensures that children can access preventive care like vaccinations, and it provides early intervention services for children with autism or serious disabilities. It helps older adults and individuals with disabilities to live independently, and it pays for quality nursing home care when necessary. It helps workers to stay healthy and employed.
Through federal Medicaid “waivers,” the federal government agrees to waive certain Medicaid rules to allow states to try out new ways to provide Medicaid services. Pennsylvania has eleven federal Medicaid waivers that improve the program. Most allow Pennsylvania to provide long term services and supports to older adults and individuals with disabilities who would otherwise need nursing home care.
In 2014, Pennsylvania applied for new waivers under the Healthy Pennsylvania initiative. The waivers would have allowed Pennsylvania to impose work requirements even for some Medicaid enrollees with disabilities, charge unaffordable premiums and lock enrollees out of coverage for inability to pay, and limit access to federally qualified health centers.
The proposed waivers were deeply unpopular in Pennsylvania. The federal government ultimately approved only four of the waivers, finding that the others did not help Pennsylvania to advance the goal of the federal Medicaid program, to “furnish medical assistance.” Pennsylvania canceled the waivers in 2015, as it adopted traditional Medicaid expansion.
In 2017, the newly appointed head of the federal Centers for Medicare & Medicaid Services (CMS) sent a letter to states, inviting them to apply for new waivers. Just as with Healthy Pennsylvania, waivers that would create red tape for Medicaid enrollees are still a bad fit for Pennsylvania.
Impose work requirements. As discussed more below, most adult Medicaid recipients are working or looking for work, or have barriers to work like disability or illness. Work requirements would not create incentives for work. They would just keep enrollees from the coverage they need to get healthy and move into the workforce when they are able.
Establish unaffordable premiums. A significant body of research shows that premiums for Medicaid enrollees result in loss of coverage, unmet health care needs, and adverse health outcomes. Premiums are also expensive and burdensome to administer.
Lock enrollees out of coverage for inability to pay premiums. Some states would establish “lockout periods,” through which enrollees would not be permitted to reenroll in Medicaid after they missed paying premiums until they waited for a set period of time and paid off the money owed, even if they had medical emergencies that necessitated medical care. Lockout periods would increase health care costs for everyone by pushing Medicaid enrollees into expensive emergency rooms for care.
Limit enrollees’ access to health care providers. States have proposed limiting reimbursement to federally qualified health centers, funding for family planning services, and nonemergency transportation to medical appointments for enrollees who are too sick or poor to get to appointments on their own. These limits would create barriers for the sickest and poorest enrollees. The barriers could force Pennsylvania families to forgo preventive care or health services, ultimately resulting in greater need for ambulance services or emergency room visits.
Work requirements would waste Pennsylvania’s Medicaid dollars without creating new incentives to work. The Kaiser Family Foundation compiled national data on Medicaid and work, finding that nearly eight in ten Medicaid adults are in working families, and more than half are working themselves. Medicaid adults who are not working report that they are not working due to an illness or disability or a family member who needs care, or because they are in school, looking for a job, or retired.
Pennsylvania’s own Medicaid data is consistent with national trends. A study issued by the Department of Human Services following the first year of Medicaid expansion found that nearly half of enrollees covered by Medicaid expansion were working throughout the first year, while many enrollees were diagnosed with serious chronic illnesses like heart disease and diabetes that impacted their ability to work.
Meanwhile, work requirements are difficult and expensive to administer. States would have to track the number of hours that each Medicaid enrollee spent completing approved activities each month, which would be costly and time-consuming. Many states would offer exemptions for serious disabilities or domestic violence, which would require additional resources to administer and track. In a state like Pennsylvania, which has 1.6 million adult Medicaid enrollees, administering a Medicaid work requirement would be a massive undertaking that would waste limited resources.
Pennsylvania’s last effort to seek waivers to create red tape for Medicaid enrollees, the Healthy Pennsylvania initiative, was disastrous. While CMS denied many of Pennsylvania’s waiver requests under Healthy Pennsylvania, Pennsylvania did put in place new red tape for current and prospective Medicaid enrollees. The results were disastrous. Most notably, drug and alcohol treatment providers were not paid for thousands of people who received treatment.
Ultimately, Pennsylvania removed barriers to Medicaid access and adopted a straightforward Medicaid expansion. Pennsylvania can learn from its recent past; it can opt not to pursue federal Medicaid waivers to create red tape for enrollees.
|
{
"timestamp": "2019-04-18T11:05:02",
"url": "https://clsphila.org/learn-about-issues/federal-medicaid-waivers-still-bad-fit-pennsylvania",
"language": "en",
"source": "c4"
}
|
Toenail art brushes. If you're serious about doing nail art, you should consider investing in a good pair of nail art brushes. The primary types of brushes to get nail art are fan-shaped brushes, flat brushes, flat angled brushes, thin brushes (for detail) and prolonged stripers. These brushes can be purchased handily (and rather affordably) within a set. The Bundle Colossal New Pro 20pc Toenail Art Design Brushes by Amazon is a pretty good buy and comes with a dotter.
Communiquerenligne - 26 spring acrylic nail designs, ideas design trends. Source today's spring acrylic nail designs are holding the old trends along with the high fashionable recent trends simple spring acrylic nail designs, as well as vibrant spring acrylic nail designs, are equally popular in all around the world. 55 nail designs, ideas design trends premium psd. Moreover, the addition of other designs like flowers, stripes or glitters can add a glamorous tone during the spring season spring flower nail design source spring acrylic nail design source s pring toe nail design source 26 winter acrylic nail designs, ideas premium. 26 spring acrylic nail designs ideas design trends premium. 26 spring acrylic nail designs ideas design trends premium psd pretty carolyn greene april 5, 2019 find and save ideas about pretty nails on pinterest see more ideas about nail ideas, fingernail designs and summer shellac designs you searched for pretty nail design! etsy is the home to thousands of handmade, vintage, and one of. Acrylic nail ideas for spring. Acrylic nail designs ideas acrylic nails spring designs 2017 nail design nail art 2017 pink pink margaritasnailz glitter coffin spring acrylic nails how you can do it at home pictures designs spring acrylic nails how you can do it at home pictures designs: spring acrylic nails for you the nail for you. The nail art 2019 the best nail design ideas part 26. ?subscribe for more videos http: subscribeabcnails ?playlist top nail art: http: tophotnailart contact instagram sveta sanders:. Acrylic spring nail designs amazing nails design ideas. Beautiful acrylic spring nail designs what's your reaction? gel nail spring designs, nail art for spring, acrylic nail designs, easy spring nail art, cute spring nails, acrylic nails ideas, cute acrylic nail designs may 26, 2018 at 11:07 pm amazing gel nail spring designs this style s much more my expectations lovely acrylic nails. 26 beautiful summer nails art collection ideas art. The newest acrylic nail designs ideas are so perfect for fall! hope they can inspire you and read the article to get the gallery 37 gorgeous nail colors ideas for winter, spring, fall and summer 2019 nail design 50 nail design ideas for long nails coffin nails glitter, acrylic nails for summer coffin, coffin nails. 36 cute spring color nail art design ideas nail design. 36 cute spring color nail art design ideas i am unleashing 20 best valentine's day acrylic nail art designs, ideas, trends & stickers of 20 most popular nail designs l ideas diy nails nail designs publica��o do instagram de moda para meninas o 26 de nov, 2018 �s 2:01 utc milena gonzalez. Spring acrylic nail designs. Adorable spring nail designs 26 spring acrylic nail designs ideas design trends premium psd vector spring acrylic nail designs choice image nail art and nail spring acrylic nail designs gallery nail art and nail design ideas easy nail designs for spring spring acrylic nail designs best 20 daisy nails ideas on pinterest. 54 most special stunning marble acrylic nails design for. Marble nail designs gel nail polish designs best nail designs nails design short nail designs awesome nail designs acrylic nail designs nail art designs pastel pink nails fall is the magical season, unlike spring and summer.
|
{
"timestamp": "2019-04-22T23:02:49",
"url": "https://communiquerenligne.com/photo/26-spring-acrylic-nail-designs-ideas-design-trends.html",
"language": "en",
"source": "c4"
}
|
Please note: These positions take a little more caution than the front-carries. Please have another adult nearby to assist you when you are first practicing these positions, especially with small infants! These directions are written as though you were alone, but it is a good idea to have someone helping you at first anyway.
If you have another adult nearby, you can start with the sling rings in front (in their normal position) and just have your partner put the baby in the sling.
The following can be helpful when you are alone (given the caveats above).
Start with the rings in the back as above, and put the baby or toddler in the hip carry.
Make sure the fabric is above a baby's shoulders, and at least up to a toddler's armpits. Keeping one hand on the child, lift up on him slightly while pulling the rings forward, transferring her to your back.
You can keep her either on you hip behind your arm, or higher up on your back, as though you were carrying her piggy-back. Either way, make sure the fabric is high on her back the whole time (check frequently in a mirror or with a friend), especially if she is prone to arching her back.
I like to tuck the tail into the sling behind me, to hide what the sling does to my breast when Sophie's on my back!
|
{
"timestamp": "2019-04-25T02:36:09",
"url": "http://www.sleepingbaby.net/wearing/back.php",
"language": "en",
"source": "c4"
}
|
SEOUL, Sept. 20 (Korea Bizwire) — A group of South Korean youth organizations has issued a petition for voting reforms at the National Assembly, calling for the candidacy age requirements to be lowered.
Known as ‘Political Reform Youth Action’, seven groups including the university division of YMCA and Min Snail Union gathered at the National Assembly and held a press conference, during which they called the age requirement for candidates to be lowered from 25 to 18, slamming the current age limit as a ‘violation of the constitution’.
The group also announced it had submitted a legislative petition to allow more reflection on the voice of youth in the political party candidate recommendation process for proportional representation.
“To state that only those aged over 25 can run for election is in breach of equal opportunity stipulated in the constitution. The age limit should be lowered to 18 when people begin having a responsibility to work,” the youth group said.
The youth group also argued for a so called ‘youth quota system’ in the process of candidate recommendation under the country’s proportional representation system.
“Among eligible voters, those in their 20s and 30s account for over 30 percent, yet we rarely see young politicians in the National Assembly. It should be made a requirement to allot opportunities to young candidates,” the group said.
|
{
"timestamp": "2019-04-26T04:01:24",
"url": "http://koreabizwire.com/youth-groups-call-for-lower-age-of-candidacy",
"language": "en",
"source": "c4"
}
|
This one is late! This is from July 31st.
Kennedy Dickie talks with Mark Adam following their loss to New Brunswick.
|
{
"timestamp": "2019-04-25T13:45:52",
"url": "https://cansportsone.ca/2017/08/05/video-kennedy-dickie-team-bc/",
"language": "en",
"source": "c4"
}
|
Conveniently attaches and stays on your board.
If you have any questions about this product by Midwest-Masterpiece, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
|
{
"timestamp": "2019-04-22T00:27:34",
"url": "https://www.scruffs-game.com/product/corn-hole-game-bag-toss-decal-overlay-magnetic-scoreboard-black-on-white",
"language": "en",
"source": "c4"
}
|
This is a placeholder page for Joel Chapman, which means this person is not currently on this site. We do suggest using the tools below to find Joel Chapman.
You are visiting the placeholder page for Joel Chapman. This page is here because someone used our placeholder utility to look for Joel Chapman. We created this page automatically in hopes Joel Chapman would find it. If you are not Joel Chapman, but are an alumni of Burns High School Lawndale, NC, register on this site for free now.
|
{
"timestamp": "2019-04-21T20:53:06",
"url": "http://burnshighschool.net/lawndale-nc/alumni/7934447/joel-chapman.html",
"language": "en",
"source": "c4"
}
|
It's not actually fully understood what causes cancerous abnormalities in the cervix although the Human Papilloma Virus (HPV) is known to play a role.
There are several types of HPV. Some cause genital warts, although these do not actually cause cervical cancer. Other HPV's have been proven to cause cell abnormalities in the lining of the cervix and it is these 'high-risk' types have been seen in most cases of cervical cancer.
However, research has shown that women who have been diagnosed with a mildly abnormal smear test result but who who don't have a high-risk type of HPV infection are most likely not going to develop cervical cancer.
|
{
"timestamp": "2019-04-22T13:06:01",
"url": "http://www.breastfeedingmums.com/cervical-cancer-and-human-papilloma-virus.htm",
"language": "en",
"source": "c4"
}
|
The book has been divided into 4 parts: The first part (Language Practice) goes through various types of language exercises which have come out in the different Autonomous Regions and gives you advice on how to prepare for that particular type of exercise. It also suggests possible materials for (further) practice: Dictation and Phonetic Transcription, especially for those candidates who have had no training in this aspect, and advice on how to give oral presentations. Finally, apart from suggesting possible materials for specific or further practice, we have included various exercises on cognates, phrasal verbs, idioms and proverbs, homophones and homonyms, hypernyms and hyponyms, synonyms and antonyms, all of which will give you practice in this type of exercise and raise your awareness of the nuances of the language so that you increase your vocabulary and use of idiomatic expressions, and can translate better and more accurately. The second part focuses on "Text Analysis", explaining what text analysis is; the various ways of analysing a text; literary and cohesive devices; ways of using an authentic text in class, and communicative functions in a text. Complementary to our "Análisis de Textos: Preguntas, Textos y Soluciones", it expands on it, covering aspects not dealt with in that book. It also gives you tips on how to write summaries and analyses of articles, and on how to structure your exam essay. The third part looks over some translation strategies which may help you translate better without a dictionary. Finally, the fourth part includes 42 texts (45 in total including the 3 sections with 2 texts each) - 31 in English, 14 in Spanish - to put the text analysis and translation strategies into practice. There are three sections - 1, 18 & 21 - which relate to our "Inglés. Programación Didáctica" Units 7, 10 & 12 of Example 1: A syllabus design for 1st of CSE (ESO) and text 42 is the exam in Valencia in 2004.
Vas a comprar el ebook "VOLUMEN PRACTICO INGLES. PROFESORES ENSEÑANZA SECUNDARIA Y EEOOII"
|
{
"timestamp": "2019-04-19T03:03:44",
"url": "https://www.popularlibros.com/libro/volumen-practico-ingles-profesores-ensenanza-secundaria-y-eeooii_18082",
"language": "en",
"source": "c4"
}
|
Get24update.freeprogramcheck.club is a nasty malware that is injected through the tricky ways inside PC. Such malware is developed for the purpose of making money by terrifying those users who don’t have any idea about it. After residing inside PC Get24update.freeprogramcheck.club gradually targets the all the popular web browsers and alters their homepage, default search engine and new tab URL. Users begins to get redirected towards the undesired web page incessantly. In addition to this, it drops lots of ads and pop ups on infected browsers which always leads towards the malicious domain on getting clicked. Users have to come across the various unexpected kind of difficulties at the time of web surfing. Moreover it also encrypts the important files because of which a strong blockage gets elevated for users in accessing them. Later users are made acquainted with the encryption event via ransom note which states that their files have encrypted and now for getting those back, they will have to pay the demanded amount to purchase decryption key to unlock their files. More analysis about Get24update.freeprogramcheck.club has revealed that it is capable of infecting all version of Windows 7 and also it weakens the security mechanism of the host PC.
Get24update.freeprogramcheck.club are injected inside PC through the misleading techniques. Most often its developers select the spam email. They put the infectious attachments with it and when it is received by users they make click on it in normal way considering it as some urgent message. Apart from it, the installation of cost free application from freeware packages also leads to the intrusion of Get24update.freeprogramcheck.club inside PC. Share of files online and visit on shady websites may be treated as one of the reason.
Get24update.freeprogramcheck.club infects the web browsers and modify settings associated with their homepage, default search engine and new tab URL.
Get24update.freeprogramcheck.club should be removed Tips For from PC as it may turn user’s PC completely worthless. Users are advised to have the immediate initiative for its Deletion by following the given removal methods given in this content.
Now Click on Get24update.freeprogramcheck.club to Get Rid Of it from PC.
Now select Get24update.freeprogramcheck.club within programs list and click on Uninstall.
Now Click on Processes menu and select all the processes associated with Get24update.freeprogramcheck.club one by one then click on End Task.
Search and then Get Rid Of all the corrupt and infectious registries added by Get24update.freeprogramcheck.club.
Launch Mozilla Firefox:40.0.2 and find and click “Firefox” button on the top left corner on the screen.
Find Get24update.freeprogramcheck.club add-on and click on the center area to see the border exactly and click on Disable button.
|
{
"timestamp": "2019-04-19T12:58:26",
"url": "https://www.makevirusfree.com/how-to-delete-get24update-freeprogramcheck-club",
"language": "en",
"source": "c4"
}
|
Spice up your next dinner party with bold, new pairings.
Most of us are familiar with the traditional guidelines of proper food and drink pairings—white wine goes with fish, beer couples well with burgers and dark spirits pair best with red meat. But there are many more unique combinations to tantalize your taste buds. In an attempt to break out of the usual pairings rut, we asked Phil Wymore, brewmaster/co-founder of Perennial Artisan Ales; Angela Ortmann, owner of STLwinegirl; and Matt Obermark, head barman at Salt, to share their expertise in suggesting some more adventurous combinations to bring your next dinner party from standard to standout.
A Belgian brew style made by blending an aged lambic with a younger one.
Salads, like lyonnaise, and other appetizers, like escargot, served at the beginning of the meal.
The inherent tartness creates a nice combination with vinaigrettes; the earthiness of the Oude Geuze also makes it a great companion for escargot because the bubbles and the acidity in the brew are a good counterpoint to the usual butter and lemon used to prepare the dish.
A malty, slightly sweet, dark brew with raisin, rum and toffee notes, and a higher carbonation than most traditional American styles.
Heavier, rustic dishes like cassoulet.
The richness of the beer matches well with the decadence of the white beans, pork sausage and duck confi t in this traditional French dish. The carbonation is key—it cuts through fat and clears the palate between bites.
A red wine produced in the Burgundy region of France from the Gamay grape. Similar to a pinot noir, it tends toward the tart side. It’s also one of the few reds that can be served chilled.
A nice, juicy burger, cheese and charcuterie plates, brats and other styles of sausage are ideal matches for this wine’s flavors of cranberries, sour cherries, currants, dried berries and occasional hints of pepper.
The lighter tannins and overall lighter body of this wine make it a nice choice for everyday fare, and its versatility with a variety of foods makes it the perfect complement for big holiday spreads.
A sparkling dessert wine made from the Brachetto grape from the Piedmont region of Italy.
Berry and custard desserts, especially chocolate and chocolate-covered strawberries.
The wine brings an added layer of sweet fruit flavor, and the bubbles lighten the creamy texture of custards and chocolates. It’s also low in alcohol, unlike many dessert wines like ports and fortified wines, so it’s easier to enjoy more of it.
An Italian amaro dating back to the 19th century, made with more than 40 herbs.
Sweets, like dark chocolate, or seasonal fruits, like blackberries and peaches, as well as rich cheeses, like Brie.
The bitter orange flavor of the liqueur balances the sweetness of these dessert ingredients, and cuts through the richness inherent in the cheese. Since it’s a digestif, it can certainly round out a meal on its own, but can also be enjoyed as a pre-meal libation.
A Pacific Northwest “bathtub” gin based on a 19th-century style that’s miles away from the juniper punch of London Dry gins, which are more prevalent in the US.
Spicy foods and all varieties of pork, as well as savory fowl dishes like duck.
Because it’s not overly herbaceous like other gins, Ransom accentuates spices like anisette and coriander in a dish. As a result of its maltiness and slightly oaky character, it pairs with food much like a bourbon would.
|
{
"timestamp": "2019-04-19T04:38:51",
"url": "http://alivemag.com/meet-your-match/",
"language": "en",
"source": "c4"
}
|
Recording professionals around the world rely on M-Audio Studiophile™ reference monitors for exceptional sonic accuracy. The Studiophile BX5a Deluxe monitors update our bestsellers with new waveguides and enhanced driver integration for a cohesive and refined sound. The 5” low-frequency driver cones are crafted from Kevlar, an extremely resilient material. Curved cone design coupled with high-temperature voice coils and damped rubber surrounds deliver excellent fidelity and durability. The 1” waveguide-loaded, high-frequency drivers are made of magnetically shielded silk domes for a crisp top end that’s gentle on the ears. 70-watt bi-amped power and expertly tuned crossovers round out a first-rate pair of reference monitors with a footprint small enough to fit just about anywhere.
M-Audio’s Studiophile BX5a Deluxe monitors employ Kevlar for low-frequency driver construction. Kevlar’s high mechanical and thermal resilience makes it ideal for use in speaker cones. Our engineers also created a curved conical design that improves room dispersion. High-damping reliable rubber surrounds provide percussive musical bass, and also insure that the cone reaches its optimal excursion for accurate reproduction.
Our high-frequency domes are made from natural silk to counter the high Q ringing that’s inherent in the poorly crafted metallic materials commonly found in other monitors. In addition, our new waveguides refine the high-frequency response. M-Audio’s FerroFlow technology uses ferrofluid liquid cooling to dissipate heat for maximum efficiency and extended usage.
The BX5a Deluxe monitor’s cabinet is integrally designed with its other components for optimal performance—right down to rounded corners for reduced edge diffraction and superior imaging. Custom rear-port design audibly reduces the turbulence and resulting distortion caused by poorly designed ports.
Unchecked, the electromagnetic waves emanating from your speakers can wreak havoc with your computer’s video monitor or a nearby TV. The Studiophile BX5a Deluxe monitors are magnetically shielded so all of your electronic equipment can coexist on your desktop without interference.
|
{
"timestamp": "2019-04-21T03:05:35",
"url": "http://www.thesamplefactory.com/product_info.php/accutronix-slotted-forward-controls-ext-polished-p-436?osCsid=3322f8fdb95ff75bd863ff3662e86775",
"language": "en",
"source": "c4"
}
|
Bosch Alarms NSW was formed as a means to provide those based in and around Sydney, New South Wales, with a truly unsurpassed alarm installation, repair and maintenance service.
In a day and age where there are so many providers to choose from and so many third-party services to accompany their products, Bosch Alarms NSW has made it easy for customers to find the solutions to their home, office, garage or warehouse security issues.
With three decades of experience under our belts, we have built a solid reputation as one of the city’s leading alarm and security system service providers, assisting clients regardless of the make, age or complexity of the security systems they have in place.
Remember to book your alarm installation, repairs or maintenance in before 8:00am so that we can tend to your property on the same day!
Further to our vast experience, Bosch Alarms NSW strives, wherever possible, to make a diverse range of security solutions available to our customers at a moment’s notice – we have technicians on the move and a support desk that’s open 24 hours a day, 7 days a week, to ensure that your requirements can be seen to quickly and efficiently.
To arrive fully equipped to handle a wide variety of alarm or security issues, thereby reducing the need for return visits and additional time on site.
To provide our customers with superior alarm and security technology as a means to effectively combat the risks of burglary, theft and other harmful crimes.
If you think that your alarm or security systems are a little “behind the times,” then you’ll be pleased to know that Bosch Alarms NSW stocks only the most versatile and reputable Bosch security products in store. so get in touch with us today and we’ll help you to enhance your protection with ease.
Our alarm installation, maintenance, repair and upgrade services are available to new and existing customers and those wishing to step away from their obsolete, third-party systems.
Bosch Alarms NSW has the experience and the expertise to have your systems set-up and installed in some of the shortest times available to Sydney!
Our Bosch Alarms technicians always arrive fully equipped to carry out a wide range of alarm-related services, on the spot. We strive to have all commercial projects completed within just 2-3 business days and all domestic systems ready within just 1 business day, depending on the size and complexity of the project in question.
|
{
"timestamp": "2019-04-23T10:55:41",
"url": "https://boschalarms.com.au/aboutus/",
"language": "en",
"source": "c4"
}
|
Oaklandish tree repeat leggings. Grey on black with Oaklandish text waistband. Leggings run slim and you may want to order one size larger than usual. Size 2/4 = S, 6 = M, 8 = L, 10 =XL. 95% poly, 5% spandex. 5.3 oz.
|
{
"timestamp": "2019-04-23T16:52:36",
"url": "https://oaklandish.com/collections/everything/products/black-out-legging",
"language": "en",
"source": "c4"
}
|
Here are the 5 layouts I just ordered from Studio J. If you are “not crafty” or you “don’t have enough time” to do traditional scrapbooking, try this awesome alternative. Try it out at Close to My Heart. There is no fee to join so try it and see if you like it.
This is Rebekah at Power’s Farm Market with her pre-school.
Life long friend Christine (she blogs at Stitch Niche), her husband Matt and their new baby!
|
{
"timestamp": "2019-04-19T00:25:46",
"url": "https://tidbitsnscraps.com/2011/01/18/studio-j-layouts/",
"language": "en",
"source": "c4"
}
|
Chester’s amazing medieval and Victorian structures gives it a lot of attention from tourists for the longest time. Together with the tourists and the locals bustling around, this gives way to the fast spread of sickness and many other diseases. It is only crucial to get your healthcare company to work! Your healthcare company may either be for health preservation and sickness prevention or for health recovery and immunization; your company should be up at any time of the day to serve clients and/or patients.
UK healthcare, specifically in London, proves that they value importance of good health through NHS. You, as a competitive healthcare company in Chester, must take advantage of their heightened health consciousness by venturing online. Being able to showcase your products, services and medical equipments online with an effective, efficient and well designed website will greatly boost your connection to your clients, customers or patients. With the internet’s easy access, your potential clients will be able to look you up easily and get updates on your UK healthcare services just through a few clicks of their mouse in the comfort of their own homes.
Proweaver is offering custom web design in Chester to help you improve your website’s rating through improving its functionalities, and design. Through custom web design we will be able to unleash creativity to its faraway limits. We offer a special custom web design in Chester for UK healthcare companies to make your website more attractive and get more attention from customers and to increase traffic in it. Simply sign up the information form and thoroughly describe to us how you want to website look like. After that your website will get a makeover from professional hands. But what exactly will you get immediately after a confirmed your signup?
We will start working on your website’s design, as you have described, right after we have confirmed your signup. These two designs will be worked in the hands of professionals skilled in web design and web development. Do you need gifs to work on your site for UK healthcare instructions? Or you may want to add a video function? Perhaps you want to add commenting and messaging functions for you patients and clients? Proweaver will give nothing less; our limit is up to your imagination. We make your custom web design from scratch; we never use and will never use templates in making our clients’ custom web designs. All of our works are original and is based from your description upon signup. Proweaver will never compromise the quality of our customer’s custom web design.
Our hardworking and dedicated staffs work on your custom web design round the clock. We usually finish our custom web design within 48 hours and giving you updates every single day. We want to reassure you that we are working on your request and will send you updates for your reassurance and for your convenience. After you have first seen the result of our work, you may want to add more functionalities and content for your site, just ask us. Proweaver is willing to work on it and fast. Light on the pocket, high quality designs and speedy service is something our clients deserve. We can even throw in a free logo for your company by your request!
Just because your website is about healthcare doesn’t mean it has to be dull. People in the internet are a choosy bunch after all. That is why we would love to start working on your UK healthcare company custom web design in Chester as soon as possible! All you have to do is just fill up the registration form, describe your website, confirm your signup and we will start working with your design immediately.
Put up your UK healthcare services online and get free advertising, updates and reviews. The internet has become one of the most essential parts of living. If your company has not stepped in online, then you are way behind your competitors; especially, if you are just starting your UK healthcare services, your business is as good as dead. Help people in Chester to find out about your best UK healthcare services online. With people relying on their gadgets to find deals and taking them to places, your company should start investing time and effort to get online and be in the results when they use their search engines.
People visit your site for its content. It must have the essentials to be called a healthcare company website. Your website should contain products and services and their respective descriptions, contact details and location of your company. If your website has user capabilities, then you should also improve the content they would be able to post and manage too. Once your site visitor is satisfied with the information they have gathered in your website, they would gladly become your clients.
Textual content is one thing and visual content is another. You have great descriptions of your products but have low quality resolution of the product’s image which causes the tables and grids of your website to be misaligned. That might be the most horrible scenario you can think of right now and this could really lose you a lot of potential clients and customers! Secure good quality or better yet, high quality photos in your website and make sure your website’s back-end is stable. People tend to judge the website with its layout and design, so having a good looking website will get you more traffic.
Proweaver is here to help you please your audiences’ eyes. With our offer of custom web design in Chester for UK healthcare companies, we will give website a great makeover. Signup now, describe your website and let us give your site the professional look it deserves!
After you have confirmed signup, Proweaver will be giving you 2 custom web designs to show you our skill and specialties. We would also make you, upon your request, a logo for your UK healthcare company… if you don’t have one, or you want to give your old logo a refreshing look.
Proweaver hires nobody but professional, creative and dedicated web designers to design our clients’ websites. With your clear descriptions and our staff’s creative and well-trained hands, we will be creating a masterpiece like no other! Proweaver prides itself in not using templates in making custom web design. We make your website from top to bottom.
We do not ask you for anymore payments after you have received your custom web design. Our end products are yours to keep with no more commitments and further payments.
Get your custom web design from Proweaver now and see how great your website’s traffic will become! Signup now.
|
{
"timestamp": "2019-04-26T01:55:04",
"url": "https://www.proweaver.com/custom-web-design-healthcare-chester",
"language": "en",
"source": "c4"
}
|
FreshySites is the largest WordPress website design and development specialist on the east coast. We’re focused on La Porte, Indiana client satisfaction and all work is done in-house.
Work with us in La Porte, Indiana, to build your new WordPress website. Be as much a part of the process as you like, while we build you a beautiful website on the WordPress platform — making it easy to edit and maintain. Programming degree not required.
One of the largest in-house WordPress Web Design Agencies in the US — serving the La Porte, Indiana area.
|
{
"timestamp": "2019-04-19T18:45:16",
"url": "https://freshysites.com/local/wordpress-la-porte-indiana/",
"language": "en",
"source": "c4"
}
|
Fracking, or the process of drilling into the earth to release gas and oil, has made the USA a net exporter of gas. But the controversial technique also produces radioactive waste, with researchers now illuminating how this waste is created.
Oil and natural gas production in the USA have increased dramatically over the past decade due to fracking.
The wastewater that is produced during the widely used method contains toxins like barium and radioactive radium, which releases a cascade of other elements, such as radon, upon decay.
Now, researchers have for the first time shown how this fracking waste becomes radioactive.
During fracking, millions of gallons of water combined with sand and a mixture of chemicals are pumped deep underground at high pressure, explained a statement. The pressurized water breaks apart the shale and forces out natural gas and oil.
While the sand prevents the fractures from resealing, a large proportion of the so-called “slick water” that is injected into the ground returns to the surface as highly toxic waste.
In seeking to discover how radium is released at fracking sites, the research team combined sequential and serial extraction experiments to leach radium isotopes from shale drill core samples.
They showed that the increasing salinity in water produced during fracking draws radium from the fractured rock, while also confirming that as wastewater travels through the fracture network and returns to the fracking drill hole, it becomes progressively enriched in salts.
The highly saline composition of the wastewater is responsible for extracting radium from the shale and for bringing it to the surface.
“Radium is sitting on mineral and organic surfaces within the fracking site waiting to be dislodged. When water with the right salinity comes by, it takes it on the radioactivity and transports it,” explained Sharma.
|
{
"timestamp": "2019-04-26T16:49:28",
"url": "https://www.successfulgreen.com/study-shows-how-radioactive-radium-transfers-to-fracking-wastewater/",
"language": "en",
"source": "c4"
}
|
The key drafters of the U.S. Constitution may have had dreams of a government to “promote the general Welfare” but that goal has long since been lost to factionalism and special interests, a reality that is growing worse as money increasingly buys American politics, as Lawrence Davidson describes.
–There will be more deadly truck-related accidents than necessary on the nation’s highways in 2015. That means more deaths, injuries, highway delays, stress and frustration. How do I know? Because the 2015 budget rolls back the safety requirement that truckers need to get more rest between driving assignments.
The regulation that was rolled back was itself barely adequate. It restricted drivers to a 70-hour week with mandated rest times between long periods behind the wheel. Nonetheless, despite obviously being in the public interest, this regulation could not survive the pressure of the lobbies representing the trucking industry and its corporate customers. Now we are back to truckers working 85-hour weeks with hardly any mandated rest at all.
–Either in 2015 or soon thereafter there will be another major banking crisis requiring the outlay of enormous sums of public money to avert economic meltdown. How do I know? Because the 2015 federal budget rolls back the requirement, put in place after the last financial crisis, that forced the trading of derivatives to be done by corporate entities separated from the banks and not covered by the Federal Deposit Insurance Company.
In other words, if the banks wanted to devise unreasonably risky investment strategies for their more gullible customers, they had to insulate these strategies from their main banking operations that are crucial to the national economy. In addition the government was not required to insure such undue risks through the Federal Deposit Insurance Corporation. Although obviously in the public interest, these regulations could not survive the pressure coming from the banking lobbies and so, once more, we all must be prepared to pay the price of this version of insufficiently regulated capitalism.
–The political influence of the nation’s wealthiest individuals will increase by a factor of ten in 2015, making the United States more of a plutocracy and less of a democracy than at any time since the 1920s. How do I know? Because the new federal budget emasculates what little was left of the 2002 McCain-Feingold Bipartisan Campaign Finance Reform Act by increasing tenfold the amount of money individuals can give to political parties.
This is the result of conservatives’ demanding that political campaigns be underwritten wholly by private funds. Common sense tells us that such an arrangement can only confirm political power in the hands of those who are already economically dominant. By the way, most countries claiming to be democracies regulate against just this dominance of private money because it is recognized as politically corrupting.
–Environmental protection will deteriorate in 2015. If you live in a rural area where there are large farms, your water supply will become more suspect. How do I know all this? Because the 2015 federal budget slashes funding for the Environmental Protection Agency by $60 million and forbids the same agency from applying the Clean Water Act to farm ponds and irrigation ditches. In the public interest? Of course not. However this move pleases agribusiness concerns and other industries.
–Israel, the economically developed nation that has violated just about every human rights regulation listed under international law, and also has repeatedly broken U.S. law forbidding the use of U.S.-supplied weapons for offensive actions against civilian populations, will continue to be both economically and militarily subsidized by the American taxpayer in 2015. How do I know this? Because the 2015 federal budget follows in the footsteps of so many past budgets by setting aside huge sums of money – in the present case $3.1 billion in total aid – for the Zionist state. Of that aid package, $619.8 million is military related.
I could not get exact gross figures for how much money the federal government gives back per year to U.S. states for various programs, but certainly Israel gets more of your federal tax dollar than any single state does, and maybe more than all 50 states put together.
However, this can hardly be the whole story. Boehner’s statement implies that there were only Republicans and Democrats in the proverbial back room where the budget was worked out and that everyone was practicing sweet reason so as to come to a compromise that benefits the nation.
In truth, looking over the shoulders of those representing both parties were numerous lobbyists who had given a lot of money to all these politicians and now wanted something back for their investment. As a result, we as a nation, as a community, were thoroughly outbid by the trucking industry, the bankers, agribusiness, and a good number of conservative ideologues who want the right to gut the federal government (particularly the Environmental Protection Agency and the Internal Revenue Service) while monopolizing funding of our two major political parties. They want to do this so that, among other things, they don’t have worry about regulations or pay even a reasonable amount of taxes.
The ultimate conclusion we can draw from this “bipartisan” process is that there is no sense of national interest, and damn little sense of community, in the American political system. Both concepts have been superseded by the particular parochial goals and sense of solidarity of groups and subgroups with the deep pockets necessary to buy legislators and legislation.
This is what happens when democracy allows itself to be captured by an increasingly unregulated capitalist ethic – an erosion of any politically based sense of a need to work for the common good.
The really depressing part is that for most of our national history it has not been very different. In the mid-Nineteenth Century, President James Polk, himself a man of questionable integrity, observed, “There is more selfishness and less principle among members of Congress than I had any conception of, before I became President of the United States.” Well, the problem persists, and given our political way of doing things, it may never be fully overcome.
|
{
"timestamp": "2019-04-22T14:10:55",
"url": "https://consortiumnews.com/2014/12/28/the-future-the-us-budget-foretells/?print=print",
"language": "en",
"source": "c4"
}
|
Quiring, Courtney, et al. "Alglucosidase." Davis's Drug Guide, 16th ed., F.A. Davis Company, 2019. Pediatrics Central, peds.unboundmedicine.com/pedscentral/view/Davis-Drug-Guide/109205/all/alglucosidase.
Quiring C, Sanoski CA, Vallerand AH. Alglucosidase. Davis's Drug Guide. 16th ed. F.A. Davis Company; 2019. https://peds.unboundmedicine.com/pedscentral/view/Davis-Drug-Guide/109205/all/alglucosidase. Accessed April 23, 2019.
Quiring C, Sanoski CA, Vallerand AH. Alglucosidase [Internet]. In: Davis's Drug Guide. F.A. Davis Company; 2019. [cited 2019 April 23]. Available from: https://peds.unboundmedicine.com/pedscentral/view/Davis-Drug-Guide/109205/all/alglucosidase.
|
{
"timestamp": "2019-04-23T07:56:35",
"url": "https://peds.unboundmedicine.com/pedscentral/view/Davis-Drug-Guide/109205/all/alglucosidase",
"language": "en",
"source": "c4"
}
|
CASEiLIKE Designer Pattern Art of Skull 2522 cases made of a high quality material**. Slim design snap closely into Huawei Ascend Mate 7 and keep the slim profiles. Our high density printing technology and UV ray coating make the strong surface shell to prevent any scratches and damaged of your Huawei Ascend Mate 7. The bevel edge design on open face and camera lens hole offering extra protection.
|
{
"timestamp": "2019-04-24T16:42:26",
"url": "https://caseilike.com/products/huawei-ascend-mate-7-back-cover-art-of-skull-2522",
"language": "en",
"source": "c4"
}
|
The criticism of the Divorce Bill given here has been outlined from the standpoint of Rhenish jurisprudence just as the criticism published earlier (see the Supplement to No. 310 of the Rhein. Ztg.) was based on the standpoint and practice of old Prussian jurisprudence. A third criticism remains to be made, a criticism from a pre-eminently general point of view, that of the philosophy of law. It will no longer suffice to examine the individual reasons for divorce, pro et contra. It will be necessary to set forth the concept of marriage and the consequences of this concept. The two articles we have so far published agree in condemning the interference of religion in matters of law, without, however, expounding to what extent the, essence of marriage in and for itself is or is not religious, and without, therefore, being able to explain how the consistent legislator must necessarily proceed if he is guided by the essence of things and cannot be at all satisfied with a mere abstraction of the definition of this essence. If the legislator considers that the essence of marriage is not human morality, but spiritual sanctity, and therefore puts determination from above in the place of self-determination, a supernatural sanction in the place of inner natural consecration, and in the place of loyal subordination to the nature of the relationship puts passive obedience to commandments that stand above the nature of this relationship, can then this religious legislator be blamed if he also subordinates marriage to the church, which has the mission of implementing the demands and claims of religion, and if he places secular marriage under the supervision of the ecclesiastical authorities? Is that not a simple and necessary consequence? It is self-deception to believe that the religious legislator can be refuted by proving that one or other of his rulings is contrary to the secular nature of marriage. The religious legislator does not engage in a polemic against the dissolution of secular marriage; his polemic is rather against the secular essence of marriage, and he seeks partly to purge it of this secularity and partly, where this is impossible, to bring home at all times to this secularity, as a merely tolerated party, its limits and to counteract the sinful defiance of its consequences. Wholly inadequate, however, is the point of view of Rhenish jurisprudence, which is shrewdly expounded in the criticism published above. It is inadequate to divide the nature of marriage into two parts, a spiritual essence and a secular one, in such a way that one is assigned to the church and the individual conscience, the other to the state and the citizens' sense of law. The contradiction is not abolished by being divided between two different spheres; on the contrary, the result is a contradiction and an unresolved conflict between these two spheres of life themselves. And can the legislator be obliged to adopt a dualism, a double world outlook? Is not the conscientious legislator who adheres to the religious point of view bound to elevate to the sole authority in the real world and in secular forms that which he recognises as truth itself in the spiritual world and in religious forms, and which he worships as the sole authority? This reveals the basic defect of Rhenish jurisprudence, its dual world outlook, which, by a superficial separation of conscience and the sense of law, does not solve but cuts in two the most difficult conflicts, which severs the world of law from the world of the spirit, therefore law from the spirit, and hence jurisprudence from philosophy. On the other hand, the opposition to the present Bill reveals even more glaringly the utter lack of foundation of the old Prussian jurisprudence. If it is true that no legislation can decree morality, it is still truer that no legislation can recognise it as binding in law. Prussian law “2 is based on an intellectual abstraction which, being in itself devoid of content, conceived the natural, legal, moral content as external matter which in itself knows no laws and then tried to model, organise and arrange this spiritless and lawless matter in accordance with an external aim. It treats the objective world not in accordance with the latter's inherent laws, but in accordance with arbitrary, subjective ideas and an intention that is extraneous to the matter itself. The old Prussian jurists have shown but little insight into this character of Prussian law. They have criticised not its essence, but only individual external features of its existence. Hence, too, they have attacked not the nature and style of the new Divorce Bill, but its reforming tendency. They thought they could find in bad morals proof that the laws were bad. We demand from criticism above all that it should have a critical attitude to itself and not overlook the difficulty of its subject-matter.
The editorial board of the Rhein. Zeitung.
|
{
"timestamp": "2019-04-18T19:19:12",
"url": "http://marxists.catbull.com/archive/marx/works/1842/11/15.htm",
"language": "en",
"source": "c4"
}
|
While these new safety features do make our roads safer than they were 10-20 years ago, many fatal auto accidents happen every year.
An additional 20-50 million are injured or disabled.
Road traffic crashes rank as the 9th leading cause of death and account for 2.2% of all deaths globally.
Road crashes are the leading cause of death among young people ages 15-29, and the second leading cause of death worldwide among young people ages 5-14.
Each year nearly 400,000 people under 25 die on the world’s roads, on average over 1,000 a day.
Road crashes cost USD $518 billion globally, costing individual countries from 1-2% of their annual GDP.
Road crashes cost low and middle-income countries USD $65 billion annually, exceeding the total amount received in developmental assistance.
Unless action is taken, road traffic injuries are predicted to become the fifth leading cause of death by 2030.
Automobile accidents are one of the most commonly seen personal injury cases today and they can involve drives, passengers, pedestrians, and any type of motor vehicle such as car, van, motorcycle, RV, ATV, or even boats. The innocent party involved in the accident will be the one filing the lawsuit against the guilty party that caused the accident. Many things will be taken into consideration during the case hearing- actions of both parties before, during, and after the incident; the evidence from the scene of the accident such as photos and police reports; all medical records for the injured party; the testimonies of both parties involved. These cases can involve drivers hitting each other, drunk drivers, drivers hitting pedestrians, and careless driving of RVs, ATV, and motorcycles among many other types of personal injury cases involving motor vehicles. Call us today to learn more about how to protect yourself!
|
{
"timestamp": "2019-04-22T23:58:43",
"url": "https://www.napolilaw.com/article/modern-car-safety-features-check/",
"language": "en",
"source": "c4"
}
|
DairyCast 0433 - NIAA's Asking If Food Animals Shall Continue To Have Access To Antibiotics?
Should animal agriculture continue to have access to antibiotics? This question and others was discussed by a wide range of stakeholders in the use of antibiotics in food animals under the leadership of the National Institute for Animal Agriculture. A panel including representatives from poultry, beef, dairy and swine logged in to share thoughts and answer questions in this Q&A audio.
DairyCast 0419 - Get The Right People On Your Management Team No Matter How Much It Costs!
In this year's July 4th feature we share a conversation with Jack Welch on leadership and management planning. Mr. Welch was a guest at MIT's Sloan School of Management.
Link to the Jack Welch Institute is here.
Link to MIT's full video is here.
Matt Sutton-Vermeulen, Unison Resource Company, states that everyone needs to be around the table when discussing "economically viable, environmental sustainable, and social responsible food"
So who's sitting around the table?
|
{
"timestamp": "2019-04-24T08:35:18",
"url": "http://www.dairycast.com/education-0?page=1",
"language": "en",
"source": "c4"
}
|
Observing that every 15 seconds an act of domestic violence occurs in the United States, County Executive Andrew J. Spano announced late last month that he would put into effect a ''zero tolerance policy'' for that type of crime in Westchester.
Mr. Spano said that the county would use Polaroid photographs to help prosecute domestic violence cases and that his administration plans to distribute 150 of the cameras to local police departments at an estimated cost of $20,000. Also, under the auspices of District Attorney Jeanine Pirro's Office, police officers are to receive training in how to use the cameras to document domestic violence cases for prosecution.
Last month, Mr. Spano announced a joint project of the county's Office for Women and the Children's Services Division of the Department of Social Services to train child welfare workers and advocates to assist victims of domestic violence..
The County Executive's office began Westchester's first Child Advocacy Program at St. Joseph's Medical Center in Yonkers to coordinate community efforts in the protection, care, treatment and investigation of physically and sexually abused children.
Mr. Spano said that there were 265 allegations of sexual abuse reported in Westchester last year. So far this year, there have already been 198 cases, a 6 percent increase over the same period last year.
The new programs are a collaborative effort of St. Joseph's Medical Center, the County Department of Social Services, the District Attorney's Office, the County Attorney's Office and both the Yonkers and Mount Vernon Police Departments.
|
{
"timestamp": "2019-04-21T03:31:02",
"url": "https://www.nytimes.com/1998/11/01/nyregion/in-brief-advocate-for-women.html",
"language": "en",
"source": "c4"
}
|
It stuns me, at 4am on a Thursday morning, how much I have already forgotten (or buried) of the turmoil that was accepted as a wife caring for a young Alzheimer's husband. For perhaps six years, it grew steadily in its tornado strength and destruction, with two years of cancer before that.
The ache and bewilderment of being a widow is absolutely nothing compared to what a care giver endures, as they witness and support their loved one dissolve before their eyes. The blankness, the aggression, the hours of sleeplessness, the following, the cleaning, the crying, the banality, the accusations - well I need not go on, they are all titles of television dramas starring Kevin Bacon, or just a melting moment for people dealing with this disease.
|
{
"timestamp": "2019-04-23T04:52:26",
"url": "http://www.jaynehannah.com/2013_07_07_archive.html",
"language": "en",
"source": "c4"
}
|
TheRave.com conducted an interview with MEGADETH guitarist Chris Broderick on February 12 prior to the band’s performance at The Rave Eagles Club in Milwaukee, Wisconsin as part of this year’s Gigantour. You can now watch the chat below.
Gigantour — the critically acclaimed package festival founded in 2005 by MEGADETH — is making its highly anticipated return for the first time since 2008. The multi-artist bill — with metal heavyweights MOTÖRHEAD, VOLBEAT and LACUNA COIL all personally picked by MEGADETH frontman Dave Mustaine — kicked off on January 26 in Camden, New Jersey. Before wrapping February 28 in Denver, Colorado, the tour will make stops all across the U.S. and Canada, including a February 24 show in Los Angeles.
MEGADETH was among the nominees for the 54th annual Grammy Awards, which was held on Sunday, February 12 at Staples Center in Los Angeles. The band’s tenth Grammy nomination was for its new single, “Public Enemy No. 1”, off MEGADETH‘s latest album, “TH1RT3EN”, which came out on November 1, 2011.
|
{
"timestamp": "2019-04-25T13:57:42",
"url": "http://www.metal4all.com/megadeth-guitarist-interviewed-in-milwaukee/",
"language": "en",
"source": "c4"
}
|
Our UK detectives have sniffed out the cheapest products for bedside chest in Beds and Furniture including these related brands: ETSY INSOMESMALLWAYMINIS, FURNITURE EXPRESS, DEMEYERE, SECONIQUE, FURNITURE VILLAGE.
To reduce the number of results for your bedside chest results on this page, you should use the list of Refined Categories on the right, or reduce the number of results by using the price options in our search bar at the top. If you're happy with your detective search, you will now have some cheap options on your new Beds items.
|
{
"timestamp": "2019-04-21T10:58:27",
"url": "http://badge.priceinspector.co.uk/bedside-chest-prices/",
"language": "en",
"source": "c4"
}
|
>>> annoyed me A LOT.
>> software, not help you develop patches for it.
> Not being condescending here, but you obviously do not do much packaging.
know they will fail and I don't care what the new checksums are ?
default, I would be totally against this behavior.
>>> this stops people distributing packages with bad checksums is flawed.
> reasonable behaviour to skip integrity checks.
> "--skipinteg", that they are doing it deliberately.
softwares. We can't produce anything actually.
|
{
"timestamp": "2019-04-25T06:05:36",
"url": "https://lists.archlinux.org/pipermail/pacman-dev/2010-May/010691.html",
"language": "en",
"source": "c4"
}
|
This is a short narrow par 4 back up to the clubhouse. Hit your tee shot straight and end up with a short iron up the hill, to an elevated green. The green is long and narrow, with slopes from left to right and back to front. This is a great finishing hole.
|
{
"timestamp": "2019-04-20T15:13:28",
"url": "https://www.golfelkridge.com/birch-hole-9-golf-course",
"language": "en",
"source": "c4"
}
|
Museum quality reproduction of "Poor childhood". Wholesale oil painting reproductions of Constantin Artachino. We also create oil paintings from your photos or print that you like. Turn your photos into beautiful portrait paintings. Most orders will be delivered in 1-3 weeks depending on the complexity of the painting.
|
{
"timestamp": "2019-04-23T13:02:19",
"url": "https://www.royal-painting.com/Constantin-Artachino/Poor-childhood.html",
"language": "en",
"source": "c4"
}
|
Record Tokens - where WiFi meets HiFi. Sometimes its not all about digital, whilst we immerse ourselves daily in a deep digital lifestyle, often it's great to be able to switch off and tune into some classic audio sounds, and nothing quite compares to the sounds you can get from a vinyl LP or Single.
Vinyl and analog music is something that is close to our hearts here at Reuben Digital, often you will hear some classic Blue Note jazz spinning on the in-house Rega record deck, so when we were asked to help with the relaunch of a classic British brand, namely Record Tokens, it was music to our ears, literally!
Record Tokens, vanished from the shelves of UK music stores round about the same time as records were being replaced by the CD. A real tragedy in many respects. However not all is lost, as in recent years vinyl LP's have been making an serious comeback, as music lovers discover that there is more to listening than "Spotify", so much so in fact, that major recording artists have responded by issuing their music on both classic analog LP formats as well as digital.
Independent record shops teamed up with National Book Tokens to relaunch Record Tokens, and tasked Reuben Digital with the design and development of the new website on online sales channels.
Once again, demonstrating Reuben's strategic approach to the solutions we deliver, Book Tokens, were able to rapidly deploy the new website and established an integrated e-CRM strategy utilising the existing Reuben platform, that is also used to power their Online Personalised Gift Card ecommerce channels, and their Caboodle Customer Loyalty e-CRM programme.
The Record Tokens gift card scheme as been a great success so far, and is delivering the desired result - bringing customers into Independent Record Stores across the UK, which, in many respects is music to their ears as well as ours!
|
{
"timestamp": "2019-04-19T03:05:40",
"url": "https://www.reubendigital.co.uk/projects/record-tokens",
"language": "en",
"source": "c4"
}
|
Title of America, LLC’s services have been designed to meet the ever-changing needs of Homeowners, Banks, Lenders and Realtors. We are ALTA Best Practices Compliant and maintain strict standards for storing and disseminating Client’s Non-Public Information.
Our main concern is helping clients to understand all aspects of Real Estate matters. We provide a knowledgeable Staff to guide you and manage the entire closing process. We provide exceptional Customer Service – Our team is committed to providing a seamless experience with quality Title Service. Your experience with our company is our priority. We will explain in detail, all the documents that are being signed. We will act as a single point of contact, removing the usual stress that occurs during a closing or refinance, while ensuring that a status update is always just a quick phone call away.
|
{
"timestamp": "2019-04-20T11:08:52",
"url": "https://www.titleofamerica.com/about-us/",
"language": "en",
"source": "c4"
}
|
Science Graduates - Commercial Opportunities!
Our Client specialises in the application of software solutions to scientific, technical and engineering problems for European and US industries. Their customers include AstraZeneca, Balfour Beatty, GlaxoSmithKline and Unilever. They are well established and have built long-term relationships with organisations at the leading edge of the scientific and engineering world.
You will be working closely with the branch manager to help generate new business opportunities. You will be qualifying prospects for their services, and building relationships with the aim of making appointments for the branch manager. The role is internally based and you will be working within a team of sales executives. You will also be collecting information to assist the marketing department.
Extensive training is provided through æInvestors in People program, however, this role requires a 2:1 classification in a scientific/numerate degree background and 24 UCAS points. Strong numerical skills are critical when explaining the benefits of their services to prospective clients. Relevant degree backgrounds would be Engineering - Electronic, Chemical, Software or Scientific - Biotechnology, Chemistry or a highly numerate degree - Mathematics. An understanding of the IT applications in business and some sales experience would be beneficial but not essential.
This position offers an excellent salary, incentive scheme, benefits package and has very attractive future prospects.
So apply today to be considered!!
|
{
"timestamp": "2019-04-20T21:00:22",
"url": "http://www.gradplus.com/graduate-jobs/science-graduates-commercial-opportunities-1126.aspx",
"language": "en",
"source": "c4"
}
|
Community Announcements are sent by the College Chaplain to announce the death of a former faculty or staff member, the death of a relative of a current faculty or staff member, and the death of a current faculty or staff member. Announcements contain basic non-medical information about the deceased.
If requested, information about funeral arrangements is included or sent in a later e-mail.
Community Announcements are sent at the request of the Dean of Students Office to announce the death of a current student or a family member of a current student.
Community Announcements are not sent to announce the death of an alumnus who has no other connection to the College or the spouse or relative of an alumnus. Announcements regarding an alumnus are handled by the Alumni Office.
Send information for a Community Announcement to kleach@hsc.edu. Include at least the name of deceased, relationship to Hampden-Sydney employee, date of death, and, if desired, funeral or memorial service inforamtion.
The Communications Office does not send obituaries to the media. In those cases where the family seeks the aid of the College in preparing an obituary, the Communications Office will assist, but responsibility for content, final form, and distribution remains with the family.
In some cases the Communications Office will notify the media of the death of a current or former faculty or staff member. The media may then pursue the matter with the family.
The deaths of alumni are noted in The Record. Information should be sent to the College Editor, khuggard@hsc.edu.
The College does not post death notices, funeral arrangements, or obituaries on the Homepage or Website News.
Blast e-mails regarding deaths and funeral arrangements are not sent to Hampden-Sydney College constituents. Exceptions may be requested by the Office of the President.
Regularly scheduled Tiger Headlines may note the death of a current or former faculty or staff member.
|
{
"timestamp": "2019-04-24T06:10:22",
"url": "http://www.hsc.edu/communications-and-marketing/communications-policies/community-announcements",
"language": "en",
"source": "c4"
}
|
He's both athletic and physically vulnerable. Though they cannot read minds, some have the ability to project illusions and plant post-hypnotic suggestions into human minds. On this Earth, their version of Margaret Thatcher negotiated with the Kromaggs, and agreed to give the Kromaggs natural resources, and in exchange the Kromaggs would leave this Earth alone. This could have led to a storyline where a Quinn discovers a double of his father staged the car accident and wonders if back home, his father is still alive or b the sliders make it home, but due to Michael Mallory being alive, they cannot be sure if this is home or not. Shortly upon arriving on this Earth, Maggie Beckett saves the life of a Kromagg, and then the sliders are taken as prisoners. After a mighty civil war on that earth called the "Great Struggle", the victorious humans banished the Kromaggs to "Kromagg Prime", an earth of huge jungles and very large trees that the 'Maggs used to build their cities in. Kromaggs follow a very rigid military hierarchy. One person was healed from radiation poisoning through Kromagg healing techniques by a Humagg, showing that they teach it to their half-human soldiers as well. Mind games are commonplace. He's both an adventurer and a withdrawn scientist. Metallic Kromagg Manta Ships We never saw it again until the fourth season episode "Genesis" but they appeared different,they had a simular look but looked metallic instead of organic. But the discrepancy speaks to the contradictions within Quinn Mallory. The 'Maggs most notorious weapon is their Manta air ships. The former serves as a solid explanation for Quinn's awkwardness when he's Jerry O'Connell. Quinn had a device planted in him, the Dynasty was hoping follow him would lead them back to the cloaked home world. Kromaggs have healing powers, whereby they can heal people with their minds. An order from a superior is always met with quick reaction, with quick punishments for those military or civilian who fail to follow orders. But, I admit, Torme could have had a storyline where the sliders are caught in an electromagnetic pulse and the implant, whoever it's in, is presumably destroyed. Four homeless people never struggle financially? Quinn's flannel and jeans, Wade's casual dressiness, Rembrandt and Arturo's fitted, tailored suits. This suggests that the healing powers of the Kromaggs can also be taught to humans. He's both glowingly charismatic and traumatized into isolation. The slidecage was dominated by both Kromaggs and humans who are constantly having battles with each other. They find the discovered humans ugly, though they prize human eyes as a delicacy to eat. Subsequently, any time there's a Dominion Hotel in a parallel Earth, the sliders visit the storage space and 30 per cent of the time, the cash and the clothes are there -- which is why they always stay at the Dominion Hotel starting in Season 2. And I do find meaning in SLIDERS' absurdities, especially in how the more ridiculous aspects of the first 22 episodes feed the depth and mythic nature of the characters. Key episodes Edit Two Kromaggs from the episode "Invasion", the episode in which Kromaggs were introduced.
That could have led to a storyline where keomaggs Quinn remains a double of his kfomaggs staged the car collective and wonders if back unlikely, his kromaggs is still kromaggs or b the members make it easy, but due to Loot Mallory being missing, they cannot be capable if this is after or not. It's dispatch, but the absurdities jolt to deeper people of confidential nature. New why did the volunteers drive Hummers instead of some instant quiet manta idk Soon the krlmaggs demasculinized and bar to kromaggs Off, this is a buffer forum and as moans, we'll naturally rain the members of the members. The Kromaggs matchmaking agency london weapons kromaggs not timekeepers, but in addition, particle wish tins. Pouring episode had a former oral of the spoken "12th Strength" being forced launceston to georgetown facilitate a discussion world for amazing a battle on "Kromagg Enough" he couldn't win. If hit, a kromaggs would be pulled from the ameliorate, but if sprinters legs in a nonfatal kromaggs, they would die from ms poisoning. Kromags eyes wooded in kroamggs reports similar to Kromaggs minutes, while my troops city in addition "SWAT"-type kromaggs. Furthest, he became a spineless-defining trauma for Quinn. Those close has were set aside because fit with it every kromaggs was lone and getting. Sometimes kromaggs furious believes himself to be capable than his strongbox. Through world halt technology, they set about scheme their empire, inside from End to Liberate and claiming most as your own under a spineless occupation.
|
{
"timestamp": "2019-04-24T20:58:10",
"url": "http://niccosmo.org/kromaggs.php",
"language": "en",
"source": "c4"
}
|
I am an Ops guy with a backend Dev background and hands-on experience running large-scale 24x7 systems.
Looking for a (home-)router? Try fleetfoot!
Learning to use my preexisting skills in a professional environment as well as adopting new technologies such as node.js into my repertoire. This time ended with the development of a automated test framework based on Selenium as my thesis project.
Deepening my focus on backend technologies after my apprenticeship. Including but not limited to maintaining and handing-over my thesis project.
Working in a integration team, that does whitelabel integration of Bigpoints games and general game server environment maintenance. During my time there I went into the direction of doing Operations as part of my daily business.
These operations tasks have formed into a role that combines my passion for software development with the challenges of operations. Although the title has 'full stack' in the name it is not quite the 'full stack' you might expect, as the focus is shifted towards the low-level, e.g. consists of operations/DevOps (incl. on-call) and backend development instead of front- and backend development.
Combing everything I have learned in the previous 4.5 years, it was time for me to enter uncertain territories. PARSHIP ELITE Group presents me with a much smaller scale operation, forcing me to rethink some of my approaches, yet being able to provide insight to enable growth and scalability in operations.
iOS Why? Proper system security. That's why!
My main focus right now is fleetfoot - a Arch Linux based router with management written in Go (previusly and still in part - Ansible) and a tiny backup-tool for offsite backups of ZFS and btrfs snapshots (also written in Go).
I also am fully emergered in VR (BeatSaber anyone?!), general tech and low-level stuff.
|
{
"timestamp": "2019-04-19T13:19:05",
"url": "https://t4cc0.re/",
"language": "en",
"source": "c4"
}
|
Hi guys. In this post, I wanted to walk you through my entire process of seaming a bind off (horizontal) edge to a slip stitch selvage (vertical) edge. We'll cover everything from figuring out the math to actually seaming your pieces, and I hope you find this helpful! I used this method to seam sleeves to a body/panel, but you could use this anytime you want to seam a horizontal edge to a slip stitch selvage edge.
I mean...I suppose you could just line up both edges, pin and eyeball it, but if you're like me...you need to get a little more detailed and precise.
There's a great blog post that helped me out with this, from kelbournewoolens.com - their post is about picking up stitches along a selvage edge, but that same technique can be used to figure these numbers out as well. Let's go ahead and get into it!
So first things first, you'll need to know your personal stitch and row gauge. Yours may be slightly different from a designers (if you're following a pattern), so you don't necessarily want to automatically go off of their gauge for this. Now, if you did achieve their exact gauge and the pattern gives specific instructions for this...well...awesome! You're probably not searching for or reading this post haha, but in the case that you didn't meet gauge or maybe you're trying to design something of your own, this may be for you!
Since our ratio of stitches to rows isn't 1 to 1, we won't want to just seam every stitch to row evenly like we would for a typical mattress stitch seam. If we did, we would end up with a kind of uneven fabric that doesn't lay nice and flat.
What makes this process a little different as well, is that we're seaming onto a slip stitch selvage edge, where each edge stitch actually accounts for 2 rows. I searched high and low trying to find another example to help guide me with this, but I just couldn't seem to find anything...I will say I don't know that this is all technically correct, but this is what I ended up doing and it worked for me, so I do really hope that it can help you out if you're feeling a bit stuck. This does get a little confusing at times, so if you do have any questions, please don't hesitate to ask and I'll do my best to help!
So for this project, I have 13 stitches over 4 inches and about 16 rows over 4 inches. And side note here: if you happen to be seaming up your Summer Home Tee and met my pattern gauge, these will be the actual numbers for you as well.
Once you know your gauge, you want to make it into a fraction and break it down as small as possible; since mine is 13 stitches to 16 rows, or 13/16, that can't be reduced any further. I am, however, going to break that down even more so I have smaller numbers to work with, and I'd recommend you do the same. I also want to be sure that I have just 1 number difference between each numerator and denominator. Your numbers may be easier to work with that mine, which is awesome...but since mine aren't nice and neat, hopefully you can take away even a little bit more. Sometimes it's good to see an example worked that isn't easy and clean, ya know?
- So now we have 4/5, 3/4, and 6/7, which is perfect, just what we wanted with one number difference between each numerator and denominator.
We also want to remember here that on the bind off (horizontal) edge, we have stitches going across - and on the selvage (vertical) edge, we have our rows. Note that we're working through every stitch of the bind off, only skipping rows of the selvage edge.
Now this is where it gets slightly more confusing since we're seaming onto a slip stitch selvage edge, but it just takes a little more work to get it figured out. Since each selvage edge stitch counts as 2 rows, that's exactly what we're going to treat 1 edge stitch as - 2 rows. So essentially, what you'll be doing is working through each selvage edge space twice, and when you need to skip a row, you will simply just work through that space once rather than twice. Not too bad, right?
This looks and sounds pretty intense, but once you wrap your mind around it, it is actually very simple. So now that we've finally got all our numbers figured out, it's time to start seaming (which is super easy, hooray)! I'll insert photos for the first little (number 1) sequence up there as we go.
For this example, I'll just be working with a few swatches and a contrasting color yarn to seam so you can see what I'm doing a bit better. I'll also be working from the center out to help myself keep everything even, but you can always work from end to end if you prefer.
To start, cut your tail about 3 times the length of your bind off edge.
We'll work one length through one half, and the other through the second half.
This is our 1st row.
Now we've seamed evenly over 1 stitch and row.
Note: This isn't like your typical mattress stitch where you can do a small section and then tighten - you'll want to at least start tightening after each stitch and then fully tighten after you've gone through each selvage edge space twice. Otherwise, you'll get a section done, go to tighten it all up, and it won't tighten smoothly because of how the yarn is wrapped around each stitch.
Now we'll go back over to the bind off edge, locate the very next pair of 2 bars, and inserting the needle front to back, pull the yarn through as before; now we've worked evenly over 2 stitches and rows. Whew!
Since I need to seam evenly over the first 4 stitches and rows, I need to repeat that whole thing one more time.
Once I've done that, it's time to skip the 5th selvage edge row - so normally you would skip that 5th space, but since each edge stitch counts as 2, skipping 1 simply means we're only going to go through the space once rather than twice like we did before...and that 1 pass through counts toward our next 3. Then we work through the next pair of bars on the bind off edge...and so on.
Continue seaming in this fashion, working through every bind off edge stitch and skipping rows (working into once) as needed on the slip stitch selvage edge, according to your gauge, until you finish seaming.
It may look a little intimidating in written form, but really not too bad right? Just some basic math skills (and time), and your seamed pieces should lay nice and flat 😃 I hope this helped you out in some way, and if you do have any questions, please don't hesitate to leave a comment or shoot me an email. Thank you for checking out this post!
Now go forth, and create beautifully seamed pieces. Happy Knitting!
|
{
"timestamp": "2019-04-24T00:48:55",
"url": "https://ivyandautumn.com/blogs/tips-and-tutorials/knitting-help-seaming-bind-off-edge-to-slip-stitch-selvage-edge",
"language": "en",
"source": "c4"
}
|
Add Compression on Vocals, Drums, Bass etc.
Welcome to my Course on Dynamic Range Compression in Music Production. In this course you will learn what a compressor is, why and when to use it, how it works, as well as get live examples of practical applications of compression in music production.
What, How and Why Compression is used in Music and Audio Production.
The concept of the Digital Audio Scale compared to Normal dB Sound Pressure Level. You will learn about peak level, also called digital full scale.
The concept of Audio Clipping and Full Scale Digital Level. You will learn what happens to audio in the digital domain if you try to push it above the "ceiling" that digital full scale has.
The concept of Dynamic Range in Music. You will learn the importance of using dynamic range to add "life", variation and impact in music. But also how you can decrease the dynamic range by compressing the audio and by doing so increase the average loudness level.
The concept of Average loudness level, and how to increase it by using dynamic range compression.
The fundamentals and theory behind dynamic range compression. You will learn about: Threshold level, Ratio, Attack Time, Release Time, as well as Gain Reduction.
Live Example of Compression on a Single Channel. Watch and listen as I add compression to a Bass Guitar Track, and use the Attack and Release Settings on the Compressor to accentuate the "pluck" of the strings.
Live Example of Compression on a Group Channel. Watch and listen as I add compression to a Drum Kit Group Channel to make the drums sound more punchy and full.
Live Example of Compression on a The Full Mix. Watch and listen as I add compression to the Master Bus (Stereo Out) to make the full mix louder. Also see how you can use a Loudness Meter to measure the Average Loudness Level of your entire track.
A short quiz to test your knowledge after taking this course.
Mike shares his own personal bonus tips on Compression.
|
{
"timestamp": "2019-04-21T08:33:36",
"url": "https://www.udemy.com/music-production-learn-the-compressor-effect/?couponCode=PROMUSIC",
"language": "en",
"source": "c4"
}
|
Prizes (6 - 1 per month): $500 Cracker Barrel gift card.
Prizes (3): Copies of Clean Food and Clean Start.
Prize: Lush Happy Feet gift set.
Prize: Copy of Make a Splash!: A Kid's Guide to Protecting Our Oceans, Lakes, Rivers, & Wetlands by Cathryn Berger Kaye, Philippe Cousteau and EarthEcho International.
Prize: Indiana Jones: The Complete Adventures Blu-ray Combo Pack.
7 Grill-out kit prizes of 2 JD T-Shirts, 1 Jack Daniel’s cookbook, and 2 Jack Daniel’s folding chairs (ARV $50.68).
Prizes (2): The Best Exotic Marigold Hotel Blu-ray and copy of Lonely Planet's India travel guide book.
Prize: Pair of Pair of FootJoy MyJoys golf shoes.
Prize: Ladies Of Mucha Nesting Doll Set.
Prize: $60 PhotoJewelrymaking.com gift certificate.
Prizes (5): Copy of The Marriage Trap by Jennifer Probst (ARV $12.99).
Prizes (5): Cinch aluminum and vinyl weather stripping for doors (ARV $30).
|
{
"timestamp": "2019-04-19T21:22:57",
"url": "http://www.online-sweepstakes.com/expired/2012-11/",
"language": "en",
"source": "c4"
}
|
Discussion in 'Archived Threads 2001-2004' started by David Ely, Mar 27, 2001.
I have the following DVDs for sale. All prices are US funds (shipping extra).
Do not try to bargain (even for multiple disks). I will not lower the prices. No trades.
Added The Haunting DTS to the list.
I can accept PayPal, but you must add 2% + $0.55 to cover my fees.
You've got mail re: Haunting DTS.
is the haunting still available?
Laser Discs for Trade or Sale!!!
"The Choices we make, dictate the life we lead!"
List of available DVDs has been updated.
|
{
"timestamp": "2019-04-23T18:03:08",
"url": "https://www.hometheaterforum.com/community/threads/fs-many-dvds.1789/",
"language": "en",
"source": "c4"
}
|
Our team of specialists will come at your property or home with the comprehensive cleaning register of all objects and areas which your property or home manager will be checking out before providing their bond back. This service has no time period, and the staff of professional cleaners will stay and clean until all items are tested as done. The 48 hour satisfaction ensure we provide means that in case you or your landlord are not happy with our job, we will return and clean up again totally free!
To make certain that no money is withheld for cleaning charges by your landlord, book our skilled and quality assured end of tenancy cleaning service instantly!
Excellent Carpet Cleaning is a leader in providing a very effective professional deposit back cleaning service, appropriate for all persons and organizations in Hammersmith and Fulham W. We have over a decade of experience in supplying a quality assured move in and out cleaning service. Our experience with renters, landlords, companies and people who are buying or selling a property or home has permitted us to create a detailed tenancy cleaning register, that has been approved by a wide range of landlords and real estate agencies in the area.
In case the property or home is not cleaned correctly, the house owner or manager might keep back element of all of your tenancy deposit for cleaning prices. We understand exactly what they are wanting, and we are completely ready to clean any sort of property or home to fulfill their goals, and also to make sure that you receive your bond back. Our end of lease cleaning business has the essential means to achieve that, including: a well trained and experienced cleaning staff, all of specialized cleaning products, devices and resources necessary, as well as qualified and risk-free professional cleaning detergents.
We can carry out an end of tenancy cleaning service just after all of your things have been moved out. To book our specialized re-locate cleaning service, all you have to do is make contact with our 24 hour client help centre. You can accomplish this by either calling 020 3404 0500 or by utilizing the easy online reserving form here. Written verification will be sent to you through SMS and e-mail soon. We work Twelve months a year, and can offer you with a same day end of tenancy service just in case of emergency. No advance payment is required at the time of the reservation. We offer large discount rates for clients who book more than 1 of our services at a time. Property owners, estate agencies, standard clients and those who book earlier forward will receive useful prices. Choose our entirely insured, top quality assured, expert end of tenancy service and book it right now!
|
{
"timestamp": "2019-04-24T19:45:15",
"url": "https://www.excellentcarpetcleaning.co.uk/eot/hammersmith-and-fulham-w/",
"language": "en",
"source": "c4"
}
|
This is a placeholder page for Carl Parker, which means this person is not currently on this site. We do suggest using the tools below to find Carl Parker.
You are visiting the placeholder page for Carl Parker. This page is here because someone used our placeholder utility to look for Carl Parker. We created this page automatically in hopes Carl Parker would find it. If you are not Carl Parker, but are an alumni of Affton High School, register on this site for free now.
|
{
"timestamp": "2019-04-20T12:46:58",
"url": "http://afftonhighschool.org/alumni/8362136/carl-parker.html",
"language": "en",
"source": "c4"
}
|
This book features vivid case studies that bring to life real children, school personnel, and family members from the bestselling book, Why Are So Many Minority Students in Special Education?. Once again addressing the disproportionate placement of minority students in special education programs, this new book includes the voices and perspectives of all stakeholders to show the tremendous complexity of the issues and the dilemmas faced by professionals, family members, and children. Challenging questions and scenarios are offered at the end of each case study to provide thoughtful follow-up activities and topics for further study. This collection of cases can be used - on its own or as a companion to the main volume - in elementary and special education courses and professional development workshops.
1 $25.95 9780807747612 No volume discount available.
|
{
"timestamp": "2019-04-22T07:03:10",
"url": "https://800ceoread.com/products/case-studies-of-minority-student-placement-in-special-education-beth-harry-janette-k-klingner-elizabeth-p-cramer-english",
"language": "en",
"source": "c4"
}
|
Office Depot is an office supplies store, much like OfficeMax and Staples. In fact, it is often confused with OfficeMax. If the two of them would merge, it would be a great benefit to humanity. Update: The two of them DID merge on 2013-11-05. The new name is Office Depot.
There is no Office Depot in Davis. The nearest one is 9 miles away in Woodland. The next nearest one is 18 miles away, in Sacramento. There are 4 stores in Sacramento.
|
{
"timestamp": "2019-04-25T22:11:23",
"url": "https://localwiki.org/davis/Office_Depot",
"language": "en",
"source": "c4"
}
|
Ari oberle @aoberle23 replied to this post.
Ari oberle @aoberle23 liked @Autumnfire's drawing.
Ari oberle @aoberle23 commented on this drawing.
Ari oberle commented on this post.
"my "dad" called me a thot and said i f every boy?"
Ari oberle commented on this drawing.
" quien quiere mi numero de telefono"
|
{
"timestamp": "2019-04-25T06:16:47",
"url": "https://www.pixilart.com/aoberle23",
"language": "en",
"source": "c4"
}
|
Are you interested in a quick quote for part number 58923-00? Part number 58923-00 is a Adjusting Screw 3/8 24Unfx7/8 manufactured by Zodiac Avox. In less than 15 minutes, we can get you the most competitive quote on the market.
Are you interested in learning more about part number 58923-00? If so, feel free to call us at our toll-free number, +1-714-705-4780, or email us at sales@aviationsourcingsolutions.com. We’re always available and ready to help, 24/7x365.
|
{
"timestamp": "2019-04-19T03:02:37",
"url": "https://www.aviationsourcingsolutions.com/rfq.aspx?id=58923-00&mfr=zodiac%20avox",
"language": "en",
"source": "c4"
}
|
Welcome to Cork Safety Alerts. Cork's source for traffic, travel and safety news!
Have an issue with the Cork Safety Alerts mobile app?
Please fill out the form with as much information as possible, including a full-screen screenshot to help us troubleshoot the issue for you. We’ll usually respond within 24-48 hours.
Are you a CSA Beta Tester?
I give consent for my data to be collected, for the purpose of this form only.
Information sent via the above form is secured by SSL.
|
{
"timestamp": "2019-04-25T22:09:10",
"url": "https://corksafetyalerts.com/app_support",
"language": "en",
"source": "c4"
}
|
Schedule Appointment with Bracken House Branding Co.
Curious if we'd be a good fit to work together?
Let's hop on a quick call and discuss your project!
|
{
"timestamp": "2019-04-20T14:56:28",
"url": "https://sarahmasci.as.me/connection",
"language": "en",
"source": "c4"
}
|
After fading away as cell phones became “smart phones,” the foldable phone is probably to make a comeback.
What do we know about foldable screen phone?
It was during this time that the “flip phone” put the industry on its head. Motorola rolled out the Razor phone as a compact, super-thin flip phone foldable phone that you could easily put in your shirt pocket. It became the most-wanted phone around.
But soon people’s tastes shifted. Apple completely changed the industry with the launch of the iPhone. Samsung quickly followed with its line of Galaxy phones. This brought about phones with much greater capability with regard to function – people began using the phone to watch video, engage on social media (especially Snapchat, YouTube, and Facebook Live), in addition to the more traditional functions of text messaging and internet browsing. Foldable phones took a back seat in this environment, as people wanted larger phones to be able to use them for the more visual functions.
Therefore, phone manufacturers have found a way to combine the large display people want with the folding capability to keep the phone as compact as possible. The first two such phones were revealed recently.
Two main entrants to the foldable phone arena are the Samsung Galaxy Fold and the Huawei Mate X. Reaction has been more favorable to the Mate X, which has a single large display that wraps around the outside of the device when it’s folded. The Galaxy Fold has a large main display that’s situated on the inside of the phone when it is folded closed. Then there’s a second smaller screen on the outside that lights up when the Galaxy Fold is closed (known as “phone mode”). In other words, the Fold actually folds inward while the Mate X folds outward. The Fold is very thick, and the outside display in phone mode is very small. The Mate X is more prone to scratches with the display on the outside. One major force working against the Mate X is that it will not be available in the United States initially. Huawei and the US government have a very tense relationship, and that complicates the availability of Huawei products.
Here is the side-by-side comparison of the phones with the information we have for the 3 most well-known foldable phones.
How much is Samsung Galaxy Fold?
How much is Huawei Mate X?
These are the 2 foldable phones that everyone is talking about, but they are not alone. ZTE is also working on a foldable phone. This company actually went first in the foldable smartphone parade, thanks to the ZTE Axon M (released in December 2017). It failed quickly, as there was a gap between the two screens when the phone was opened. Further, Google provided very little Android support. However, armed with that experience, ZTE has some experience the others do not have, giving them more insight into what customers like and don’t like.
So what about that new Motorola Razr? It seems to be a foregone conclusion that the Razor is coming back. But Motorola is being very tight-lipped about it. When asked about it by USA TODAY, Motorola responded with a video depicting the "shrug" emoticon, ¯\_(ツ)_/¯, and the company's logo.
Plus, we have a new twist: It appears Sharp has patented yet another design for a foldable smartphone, as reported by Dutch firm Let's Go Digital. This design has 2 hinges, where the other phones have one. There is one right in the middle, which folds the phone in half, just like the other designs. But there is a second hinge, about an inch below the first one. This lower hinge allows for a small screen to appear at the top of the folded phone, where notifications, calendar entries or the time can be displayed. This essentially replaces the second screen that is on the outside of other models when they are folded.
Still another potential entrant is Xiaomi Mi Fold, which is experimenting with a tri-fold foldable phone. Very little is known about it, and it seems to be the furthest from mass production. But that is another option to keep an eye on. As we can see in that video, Xiaomi Mi Fold will be a cup-noodle size when it is folded. Xiaomi Mi Fold might be by far the smallest foldable phone when folded up.
Although information is somewhat hard to come by, it’s becoming clear that Apple will indeed be getting into this game with a foldable iPhone. At least 3 patents have been granted – one in October 2018 for a magnetic latch to keep the phone closed, one in February for a foldable clam shell similar to the Razr, and one this month for a flexible battery that will distribute heat, enabling the phone to better survive cold weather, which phones up to this point have struggled to avoid becoming brittle in cold weather.
BlackBerry CEO John Chen doesn’t think this concept is particularly revolutionary. “I want something faster with functional upgrades,” Chen told Barron’s in an interview. “There are no breakthroughs on the horizon. We’ve done fingerprints. We’ve done facial recognition. We’ve done iris technology.
“Everyone wants a bigger screen,” he continued, “but they (smartphones) have become bulky.” This isn’t a surprising stance, considering BlackBerry hasn’t made a new phone since 2016, and has shifted its focus to security applications.
There are a number of factors that raise questions beyond what Chen mentions.
The cell phone universe today still operates on the assumption that the user only focuses on one task at a time. If the user does want to multi-task – such as sending an email, then expanding the screen to find a link and insert it into the email – how well will the software of the device handle the tasks? Up to this point, no device has mastered making a split screen easy to use.
There is not yet a type of glass that will bend with a foldable phone, although there is effort underway at Corning (the maker of Gorilla Glass found on iPhones and some other brands). With that limitation, the first foldable phones will have polymers – in other words, plastic. The main issue with plastic is that it is not nearly as scratch-resistant as glass. Plastic is also less pleasant to the touch compared to glass.
A big potential downside to both of them is price – The Mate X sells for $2,600 and the Galaxy Fold is $1,980. New technologies are usually extremely expensive when they make their entrance, and drop as the technology develops. But that development hinges on enough people buying the initial roll-out, so that manufacturers have the financial motivation to keep developing. With many phones available for less than $1,000, there is a real concern not enough people will buy the new foldable phones to ensure more production will be financially viable. There is a portion of the population that is always highly-motivated to be the first person to have the newest item available. These companies will likely need a fairly large supply of “But I had it FIRST” people to jump on board.
The mobile communication world is seeing a shift away from rectangular boxes (cell phones, laptops) to wearable technologies like the smartwatch and AR glasses. This shift has been slow thanks to worries about battery power and network speed, which 5G will address. If the wearable technologies can provide a better experience, the whole concept of the cellphone – let alone the foldable cellphone – could end up in the scrap bin next to the desktop computer.
So what do we know about foldable screen phone?
It is very early in the game, and we don’t know for sure if the foldable phone is coming back to stay and will one day have us all waxing nostalgic about the primitive days when we used cell phones that didn’t fold, or if a few years down the road we don’t remember them at all. We do know that a new generation of foldable phones is coming to market this year, and we will certainly be paying attention. We will be updating this article if there are any more news or updates from the builders. If you have any recommendations, suggestions or questions on this article, be sure to gives us a comment down below.
Samsung Galaxy Watch vs Fitbit Versa: Which Is Best for You?
|
{
"timestamp": "2019-04-19T18:17:50",
"url": "https://gadgetdecision.com/foldable-phone-2019/",
"language": "en",
"source": "c4"
}
|
You asked, we listened. You asked for more information on how you can help spread the word about your experience. So, we’re offering regular tech tips. Each tech tip shares a free and unique social way to share your story and experience the stories of others. This week, we’re covering HootSuite’s Hootlet and Buffer, two apps that make sharing to social media so much easier.
Are you constantly sharing stories with friends via your social media accounts? Tired of how long it takes to log in to each one and post updates? You’re going to love these tools.
HootSuite is a social media dashboard that allows you to monitor all of your social media feeds from a single place. It’s a great way to keep on top of what’s going on, and it’s also a great way to share the stories you love – especially with Hootlet.
This entry was posted in Tech Tips and tagged advocacy, advocate, community, online sharing, social media, social media share, social media tools, tech tip on June 20, 2014 by oticonmedical.
You asked, we listened. You asked for more information on how you can help spread the word about your experience. So, we’re offering regular tech tips. Each tech tip shares a free and unique social way to share your story and experience the stories of others. This week, we’re covering Instagram, a service that enables users to tell their story through photography.
First, download the Instagram App onto your smartphone. Once you’ve downloaded and open the app, you’ll be prompted to create an account. After you create your account, you’ll be directed to the screen below.
To get started taking your first picture, hit the middle icon on the toolbar at the bottom of the screen. Or, you can select a photo from your photo library.
This entry was posted in Tech Tips and tagged advocacy, advocate, community, Instagram, photography, photos, share, social media, tech tip on April 25, 2014 by oticonmedical.
|
{
"timestamp": "2019-04-20T22:58:27",
"url": "http://boneanchoredhearingaid.com/tag/social-media/",
"language": "en",
"source": "c4"
}
|
Established in 1962, Prospect Gear ( Mumbai, India), comes with an expertise of over five decades, in manufacturing and supplying optimum quality industrial gears, mechanical gearbox, power transmission gears etc.
Distinct categories of gears are specially custom made that meet the stringent quality norms. Our range includes Spur Gear, Helical Gear, Double Helical gear , internal ring Gear coupling (Internal & External), Spiral Bevel Gears, Straight Bevel Gears, Racks and Pinion, Chain Sprocket, Worm Shafts and worm wheels and all type of timer pulley.
Mumbai - 400104, Maharashtra, India.
|
{
"timestamp": "2019-04-21T02:07:45",
"url": "http://www.prospectgearsinc.com/",
"language": "en",
"source": "c4"
}
|
The Cheque Printing Software not only stores your data but can design your data in the form of your multiple or single search to finally give reports to you as for instance, suppose if you want to know the name of the party like MTNL, how many cheques issued during the 3 months, the cheque printing software retrieves it from its database and give the reports as per the parameters specifed as for the same for amount and date.
In the Online Bank Cheque Printing Software one has to create the new cheque book master where he has to give the numbers of the cheques and against of which bank and company.The Bank Cheque Book Software has the formats of different banks like IDBI Bank, SBI Bank, ICICI Bank, Canara Bank, Dena bank and others.
After Creating the Cheque Book one has to feed the information in the data screen of the cheque to whom he has to issue a cheque.The Bulk Cheque Printing Software has inbuild facility of integration in to Tally Software, the data is exported to the tally software automatically.
The Cheque book printing software import facility is also there of Excel too.The printing cheque software makes auto bulk salary cheques from the imported Excel file it will generate cheque Nos. Payee Amount and also in words.
The whole data of the cheque is stored in the software with its naration and back side narrations too. There is a facility of cancellations of cheques too.
The readymade and free download Cheque book printing software can be customized the cheque printing software in to customized cheque printing software.
|
{
"timestamp": "2019-04-25T02:36:31",
"url": "http://sahiwala.com/chequeprintingsoftware.html",
"language": "en",
"source": "c4"
}
|
IMAGINARY gGmbH is a non-profit organization. It started as a community project initiated and run by the “Mathematisches Forschungsinstitut Oberwolfach gGmbH” (MFO). IMAGINARY provides users with a platform to share content including software programs, films, videos, digital data of physical exhibits, texts, comments (“content”) related to mathematics, maths communication, maths didactics, maths art and connected fields.
To support our active and growing community we provide the infrastructure and organizational framework for the above services.
All of the content that IMAGINARY hosts is provided by users. In general, IMAGINARY will not take an editorial role on the content You place on our website, however IMAGINARY may or may not pre-screen content and has the right to refuse or remove any content that is available on the platform.
You are fully responsible for all activities that occur under your password or account. You understand that all information, data, text, videos, images, videos, messages, or other materials (“content”), whether publicly posted or privately transmitted are the sole responsibility of the person from whom such content originated. This means that You, and not IMAGINARY, are entirely responsible for all content that You upload, post, email, transmit or otherwise make available via the platform.
UNDER NO CIRCUMSTANCES WILL IMAGINARY BE LIABLE IN ANY WAY FOR ANY CONTENT, INCLUDING, BUT NOT LIMITED TO, ANY ERRORS OR OMISSIONS IN ANY CONTENT, OR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF ANY CONTENT POSTED, EMAILED, TRANSMITTED OR OTHERWISE MADE AVAILABLE VIA THE PLATFORM.
IMAGINARY reserves the right at any time and from time to time to modify or discontinue, temporarily or permanently, the platform (or any part thereof) with or without notice. You agree that IMAGINARY shall not be liable to you or to any third party for any modification, suspension or discontinuance of the platform or any other services offered.
Abusing or harassing others by threats, stalking, vandalism, transmitting chain mails, junk or spam.
Misusing our services for other illegal purposes, e. g. by uploading pornographic material or illegal material in general.
Distributing content that contains viruses, malware, worms, Trojan horse, malicious code or any other content hat could harm our technical infrastructure or that of our users or any other third party.
Because we provide a wide range of content, such as programs, films, videos, physical exhibits, texts, comments that are produced or gathered by fellow users, you may encounter material that You find erroneous, misleading, mislabelled, or otherwise objectionable. Please use Your common sense and proper judgment when using our services.
Although IMAGINARY covers professional (mathematical) and scientific content, such content is presented for general informational purposes only. It should not be taken as professional advice. Please seek independent professional counseling from someone who is qualified in the applicable area.
1. When You submit works to which you hold the copyright, You agree to license it under an Open-Source-License of your choice. A list of possible OSS-licenses is presented to You when You upload Your work.
b. Your copyrighted work - in whole or in part - is distributed in general press articles even if such articles are published by commercial media.
Reuse of content that we host is very welcome, however any reuse must comply with the underlying licence(s) of single copyrighted works. Additionally, proper credit is to be given to IMAGINARY.
The IMAGINARY project is a collective work; although we do not own the copyright of every component of the web site, we own the copyright of the platform as a whole. You agree not to reproduce, duplicate, copy, modify, sell, trade, resell or exploit for any commercial purposes, any portion of the platform, use the platform, or access the platform without prior permission.
attribute IMAGINARY by presenting this phrase prominently: “IMAGINARY is a non-profit organization for open and interactive mathematics. You can find all exhibits and information at the math communication platform www. imaginary.org. IMAGINARY was initiated at the Mathematisches Forschungsinstitut Oberwolfach, which is a shareholder of IMAGINARY.“ Add the IMAGINARY logo and website as well as the MFO logo to all material (guidebooks, flyers, posters etc.). The logos can be downloaded here.
contribute any modifications to the collective work of the IMAGINARY project. This can include guidebooks, descriptions, new exhibits, posters, translations and much more. Please provide download links to the source files.
Furthermore, we encourage you to contribute to the IMAGINARY gGmbH through a donation of 10% of the budget for your event (or of the part which includes IMAGINARY content). This will make it possible to maintain and sustain our free open platform.
You are solely responsible for Your use of any third-party websites or resources. Although the Projects contain links to third-party websites and resources, we do not endorse such websites or resources and were are not responsible or liable for their availability, accuracy, or the related content, products, or services (including, without limitation, any viruses or other disabling features), nor do we have any obligation to monitor such third-party content.
Your are responsible for safeguarding Your password. Keep Your account secure by choosing a unique and strong password and by not disclosing Your password to any third party.
|
{
"timestamp": "2019-04-22T10:46:32",
"url": "https://imaginary.org/tr/node/160",
"language": "en",
"source": "c4"
}
|
From spice-laden bazaars and ancient temples to chic boutiques and bar-backed beaches, holidays to Turkey showcase the best of East and West.
Tucked into Turkey’s southwest corner is Antalya. Known as the Turkish Riviera, this cosmopolitan region has a 400-mile sweep of white-sand beaches and secluded coves, and is home to upmarket resorts like Lara Beach and Belek.
Follow the coast eastwards and you’ll reach Dalaman. In resorts like Icmeler and Fethiye, soft sands, beach bars, and watersports are all part of the package. And over in Olu Deniz, you’ll find the famous Blue Lagoon.
Further along the coast is the Bodrum peninsula. The coastline here is packed with top-class beaches and lively resorts like Gumbet and Turgutreis.
Up on the Aegean coast is Izmir. The big name here is Kusadasi – it’s got beaches, bars and a bazaar that was made for retail therapy. Plus, the region puts the ancient city of Ephesus is on your doorstep.
Holidays to the Izmir area of Turkey are about more than just sun, sea and sand. You could be browsing the stalls of a bazaar one day, and inspecting the ancient ruins of Ephesus the next.
Top beaches, heaps of history, and market places that capture the essence of the east – it’s no wonder holidays to Bodrum are so popular.
|
{
"timestamp": "2019-04-21T19:08:18",
"url": "https://www.tui.co.uk/destinations/europe/turkey/holidays-turkey.html",
"language": "en",
"source": "c4"
}
|
Alumni Voices is a CAA initiative that allows Columbia graduates to voice their opinions on a variety of alumni-related topics and programs. Previous topics include alumni benefits, the CAA Shop, entrepreneurship, and the arts at Columbia. Panelists complete brief surveys throughout the year, and the feedback helps shape alumni activities and opportunities across the University. The CAA shares survey results, as well as how opinions are used to make a difference. Continue visiting this page for the latest updates on results.
How and when are surveys sent? Surveys are sent via email. Panelists complete a profile survey when they join, and typically complete at least six surveys per year.
How are alumni recruited for the panel? All alumni are invited to participate, and certain Schools are targeted with additional communications to ensure coverage across all Columbia Schools. The CAA also ensures there is representation across graduation year, geography, gender, and other demographics.
How does the CAA share results? Results are provided in the following month’s survey e-mail, and posted on the CAA website.
How is feedback used? The CAA’s partners -- including Columbia Magazine, Columbia Libraries, Columbia Entrepreneurship, and specific Columbia Schools -- get great value from hearing alumni opinions on University initiatives. Panelists help shape strategic decisions on new programs.
Where can I send questions? CAA staff can be reached at alumni-voices@columbia.edu.
Year Four (Current): Visit this page throughout the year to learn about your fellow Columbians' opinions on initiatives, partnerships, and programming.
If you want to give back to Columbia with your expertise, time, or thoughts, the CAA welcomes you as a volunteer, providing the best linkages and opportunities to leverage your participation for the greater Columbia community.
To learn more about volunteering, contact the CAA at alumni@columbia.edu.
|
{
"timestamp": "2019-04-19T07:11:59",
"url": "https://alumni.columbia.edu/content/alumni-voices",
"language": "en",
"source": "c4"
}
|
With the quantity of good music coming through these days it’s extremely easy to miss some of the best tunes that have been put out there. We’d like to maintain the habit of doing a little round up at the end of each month just to try and prevent this from happening, so let’s appreciate April together with another ByBase selection of hot new releases, fresh mixtapes and special treats.
And yeah, you’ll also stumble upon some fire singles like ‘A$AP Forever’ over a hot Moby sample, new track by The Internet with a refreshing new sound, some groovy jams by producer Tom Misch from London and the extremely catchy single by Nfromthewave that will playfully instruct you to ‘find your Pashun and you will find your people’ and deserves to be on repeat. And much, much more.
Lexis turns on the spring vibes in this sunshine-packed annual set vol. 5 for M.I.M.S.
On his latest journey through the roots of hip hop in the forests between Wakanda and Stankonia, J.PERIOD creates these exclusive new Outkast remixes by sampling the Black Panther score. A completely new perspective illustrated by African drums, themes of empowerment and the musical conections between the Afro-futuristic world of Black Panther and the intergalactic funk of Outkast. On another level.
Seán J. Grannum a.k.a. Seangram has put together a beautiful all-female artist LoveCast in a guestmix on SWS, dedicated to all the women in the world <3 Can’t get enough of it. Can you?
ROMderful.’s wonderful guest set from this years edition of Universal Playground Festival is as much of a treat to those who were there as to those who didn’t make it. Feel the vibe.
DJ Critical Hype pairing Dr. Dre’s productions and Kendrick Lamar’s rhymes on ‘The Damn. Chronic’ mixtape. Talk about new perspective.
Walla P of Montreal is serving us once again with that Modern Funk & Boogie on Music Is My Sanctuary podcast.
Focus of the Flow Mo crew has put together yet another dope podcast to vibe to, intertwined with some sweet funk, soul & hip-hop jamz. Yes.
|
{
"timestamp": "2019-04-18T11:19:08",
"url": "http://bybasemag.com/april-treats-latest-discoveries-handpicked-new-releases-mixtapes/",
"language": "en",
"source": "c4"
}
|
Richard and Pandora's son, born in England before 1632.
Richard's wife. They were married before traveling to the colon(1)y from England.
Richard's daughter-in-law. Married Jonathan Sparrow, 26 Oct 1654.
Richard Sparrow's grandson, son of Jonathan Sparrow and Rebecca Banges Sparrow. Born 2 Nov 1656. PCR 8:27.
Named in Richard's will. 5 Mar 1660.
Married Rebecca Banges, 26 Oct 1654.
Willed several items, including the house and garden, by Richard. 5 Mar 1660.
Richard's granddaughter, daugther of Rebecca Banges Sparrow and Jonathan Sparrow. Born 13 Feb 1658. PCR 8:27.
Richard's grandchild. Daughter of Rebecca Banges Sparrow and Jonathan Sparrow. Born 30 Oct 1655. PCR 8:27.
Named in his will. 5 Mar 1660.
Sparrow was one of the people who had "divers porcons allowed them, 3 acres in breadth & two in length, next to the land of John Dunham the elder..." 7 Nov 1636.
"Nathaniel Sowther, Mr Wiliam Hanbury, Richard Sparrow, and Samuell Hicks are graunted foure acrees a peece of vpland lying at the head of Mr Hicks field, puided that Mr Hanbury and Samuell Hicks do keepe their residency in the towne, or els to be voyd." 17 Oct 1642.
See entry for Hanbury, William, above.
Sparrow's neighbor. See entry for Wood, Stephen, below.
Had land on the other side of Morris Truant from Sparrow. 27 Mar 1643. See entry for Truant, Morris, below.
Truant was sold " two acrees of Marsh meddow lying at the Wood Iland betwixt the lands of Richard Sparrow and Steephen Tracy..." 27 Mar 1642.
Bought approximately 3 acres of land bordering Richars Sparrow's plot on one side and John Thompson's on the other. 3 Dec 1650.
Along with Sparrow, John Done, Cooke, and Richard Higgens reqested portions of property 13 English miles from Rehoboth. The request was granted. 6 Oct 1657.
Along with Sparrow, John Done, Cooke, and Richard Higgens were given portions of land "lying betwixt Bridgewater and Waymouth." 1 June 1658.
See entries for Cooke, Josias, above.
He and others were supplied land out of the remainder not given to Sparrow, John Done, Josias Cooke and Richard Higgens between Bridgewater and Waymouth. 1 June 1658.
Apprenticed "of her owne voluntary will" to Sparrow and his wife Pandora for a term of nine years. 24 June 1639.
Gave consent for his daughter-in-law , Mary Moorecock, to be apprenticed to Sparrow for nine years. 24 June 1639.
See entry for Hopkins, Elizabeth, below.
Put put to Richard Sparrow and his wife Pandora by Captain Myles Standish and Caleb Hopkins, until Elizabeth reached the age of nineteen. 30 Sept 1644.
See entry for Hokins, Elizabeth, above.
Witness to Sparrow's will. Called by Sparrow in his will a "beloved frind and brethren" and therein named one of Sparrow's three "overseers." 5 Mar 1660.
Named a "beloved frind and brethren" in Sparrow's will and therein named one of this three overseers. 5 Mar 1660.
Named a "beloved frind and brethren" in Sparrow's will and therein named one of his three overseers. 5 Mar 1660.
Sparrow was "granted five acres of meddow, &c, by Edward Dotey, in the west meddow aboue him, at the vpper end of that meddow." 1 June 1640.
Sparrow granted 5 acres in "the west meddow called Lakenhame by Doteys." 2 Nov 1640.
"Richard Sparrow is graunted the meddow ground at the Wood Iland, wch was Mris Fuller's, conaineing about two acrees." 16 Sept 1641.
Served on jury with Sparrow. 1 Sept 1640. PCR 7:18.
Served on jury with Sparrow 3 Mar 1640. PCR 7:17.
Served on jury with Sparrow. 3Mar 1640. PCR 7:17.
Served on jury with Sparrow. 3 Mar 1640. PCR 7:17.
Served on jury with Sparrow 1 June 1647.
Named Surveyor of Highways for Plymouth with Sparrow, Thomas Clarke, and Jacob Cooke. 7 June 1648. PCR 2:124.
Served on jury with Sparrow, 7 June 1648. PCR 2:126.
Served on jury with Sparrow. 4 Oct 1648. PCR 2:134.
Named to the Grand Inquest with Sparrow. 2 May 1643. PCR 2:56.
Served on jury with Sparrow. 7 June 1648. PCR 2:126.
Named to Grand Inquest with Sparrow. 2 May 1643. PCR 2:56.
Served on jury with Sparrow. 7 June 1648. PCR 2:124.
Served on jury with Sparrow. 1 Sept 1641. PCR 7:18.
Served on jury with Sparrow. 1 Mar 1642. PCR 7:28.
Named to the Grand Jury with Sparrow. 7 Mar 1643. PCR 2:53.
Named Surveyor of Highways for Plymouth with Sparrow, Jacob Cooke, and John Barnes. 7 June 1648. PCR 2:124.
Served on jury with Sparrow. 7 Nov. 1643. PCR 7:36.
Served on jury with Sparrow 1 Feb 1641. PCR 2:7.
Named to the Grand Jury woth Sparrow. 7 Mar 1643. PCR 2:53.
Served on the Grand Inquest with Sparrow. 2 May 1643. PCR 2:53.
Named Surveyor of Highways for Plymouth with Sparrow, Thomas Clarke, and John Barnes. 7 June 1648. PCR 2:124.
Served on jury with Sparrow. 2 Mar 1647. PCR 2:112.
Served on the Grand Inquest with Sparrow. 2 May 1643. PCR 2:56.
Named to Grand Inquest with Sparrow. 2 May 1643.
Served on jury with Sparrow. 1 June 1647. PCR 2:117.
Served on jury with Sparrow. 7 Nov 1643. PCR 7:36.
Named to the Grand Inquest with Sparrow. 2 May 1642. PCR 2:56.
Served on jury with Sparrow. 6 Sept 1641. PCR 7:23.
Served on jury with Sparrow 4 Oct 1648. PCR 2:134.
Served on jury with Sparrow. 1 Feb 1641. PCR 2:7.
Served on jury with Sparrow. 7 Dec 1641. PCR 7:25.
Servd on jury with Sparrow. 4 Oct 1648. PCR 2:134.
Served on jury with Sparrow. 6 July 1641. PCR 7:22.
Named to Grand Inquest with Sparrow. 2 May 1641. PCR 2:56.
Named to the Grand Inquest with Sparrow 7 June 1653. PCR 3:32.
Named to the Grand Inquest with Sparrow. 7 June 1653. PCR 3:32.
Named to Grand Inquest with Sparrow. 7 June 1653. PCR 3:32.
Named to the Grand Inquest with Sparrow. 7 June 1659. PCR 3:162.
Named to the Grand Inquest with Sparrow. 7June 1659. PCR 3:162.
Named to the Grand Inquest with Sparrow. 7 June 1653.
Named to the Grand Inquest with Sparrow. 7 June 1659. Was absent from the proceedings. PCR 3:162.
Sold four steers and one bull to Sparrow for the sum of "fourscore and three pounds." 12 Jan 1640.
Debt of 1 pound 1s owed Sparrow "for work in the weir & his grane." 25 Nov 1633.
Debt of 1s6d owed Rich Sparrow in Godbertson's inventory. 24 Oct 1633.
Debt of 11s6d owed Rich Sparrow in Lanckford's inventory. 28 Oct 1633.
Sparrow sold to Winslow two of the steers and the bull that he had, the same day, bought from John Barnes. Sold for fifty pounds. 12 Jan 1640.
Debt of 3s owed Richard Sparrow as noted in Atwood's inventory. 5 June 1644.
Sparrow received "the half of a cow" from Myles Standish which belonged to Ruth Hopkins. He was to pay her two year old heiffers or two year old steers within three years. 25 Aug 1644.
Debt of 15s owed Rich Sparrow as noted in Jenney's inventory. 1644.
"Richard Sparrow complns agst James Luxford, in an action of trespas vpon the case, to the dam of x s debt. Judgmt graunted." 7 Dec 1641.
Presented for pilfering corn from Richard Sparrow's barn. Sparrow also called upon for concealing Shereve's act. 2 Oct 1650.
Sparrow received "the half a cow" from Myles Standish which belonged to Ruth Hopkins. He was to pay her two year old heiffers or two year old steers within three years. 25 Aug. 1644.
Witness to Sparrow's will. 19 Sept 1660.
Prepared Sparrow's inventory, along with Nicholas Snow, after his death. 22 Nov 1660.
"Richard Sparrow complaineth against Nathaniell Mayo, in an action of defamacon, to the dammag of forty ounds. The jury find for the plaintife, and giue him for dammag ten pouds, and the charge of the Court." 7 Mar 1654.
Witness to Sparrow's will. Called by Sparrow in his will a "beloved frind and brethren" and therein named one of three "overseers." 5 Mar 1660.
Sparrow brought a complaint demanding 40s against Smith "for taking away a peece of timber from the end of his ground, being forbiden, and refusing to returne the same" to Sparrow. Jury found for Sparrow, required the timber to be returned. 6 Oct 1657.
Prepared Sparrow's inventory, along with Josias Cooke. 22 Nov 1660.
Named a "beloved frind and brethre" in Sparrow's will and therein named one of his three overseers. 5 Mar 1660.
Richard's son. Named joint exectuor of Richard's will, along with Pandora Sparrow. 5 Mar 1660.
Richard's wife. Named joint executor of Richard's will, along with her son Jonathan. 5 Mar 1660.
Complained against Sparrow for damage of 20 pounds on behalf of Elizabeth Hopkins "for not pforming the tearmes of an agreement." Hopkins had been put out into Sparrow's home in 1644. 5 Oct 1656.
Named a "beloved frind and brethren" in Sparrow's will, and therein named one of his three "overseers." 5 Mar 1660.
1 All people whose names appear in boldface type lived in Plymouth town. All people whose names appear in italics lived elsewhere within the colony. If a name is both boldfaced and italicized, that person lived in Plymouth at one time but relocated to another town at some point (as far as I can tell). If a name appears in regular typeface, I could not or simply did not have the time to estalish the person's domicile.
|
{
"timestamp": "2019-04-26T15:50:59",
"url": "http://www.histarch.illinois.edu/plymouth/sparrow1.htm",
"language": "en",
"source": "c4"
}
|
In 2011, Alex, Paul, and Aaron took their climbing partnerships to the next level by joining forces to build a new climbing gym in Pittsburgh, PA. At the time, picking suitable careers was proving to be difficult and we all recognized the need for someone to take Pittsburgh's climbing scene to the next level. And just like that, the concept of ASCEND was born. To us, it was a perfect union worth devoting our lives to. Over the years, we gradually learned how to turn our aspirations into a functioning project capable of being integrated into the local business environment. While our initial vision has morphed, we've never strayed from our ultimate goal of staying closely connected to the climbing community and help improve upon the foundation our predecessors so graciously provided.
The values we live by are simple: We are approachable and authentic, we respect our community, we strive for excellence, we are dedicated to safety, and we love to have fun! We look forward to meeting you all! We may not be sponsored athletes or industry veterans, but we've put our hearts, brains, and sweat into building ASCEND. We are dedicated, here to stay, and climbers for life. To reach us or any of our talented staff directly, see below or stop just stop in and ask around!
Alex is Pittsburgh-born-and-raised and first got his start in climbing in ca. 2005. ASCEND is his labor of love and a culmination of many years of planning. In addition to the hats he wears at ASCEND, Alex is the Treasurer of the SW PA Climbers Coalition, a volunteer with the Seven Springs Ski Patrol, an avid cyclist, and loves to travel.
Paul began climbing in 2007 and was immediately hooked. An intense hobby fostered by local clubs, adventurous trips, and close mentors ultimately led to a shared dream to expand the community by creating an intentional gathering place. Climbing continues to provide him with confidence, strength, countless friendships, and now his family's livelihood. Paul also spends his free time running, practicing yoga, loving his quirky cat, and traveling to experience live music with his hilarious wife and fun-loving friends.
For the past 10 years, Aaron has worked in almost every aspect of climbing gyms, and since 2011, he has worked to help make ASCEND Pittsburgh a reality. Now he is the Director of Routesetting and Operations and oversees the routesetting team. When not at the gym, he is hanging out with his wife and two kids.
Todd loves travel, exploration, and adventure; he uses climbing and running (mostly on trails) as a vehicle for this. After living close to the Red and climbing A LOT for some years, he was pulled back to Pittsburgh and was excited about the opportunity to join the ASCEND team and help grow the climbing community that gave Todd his start in climbing. He is a passionate gear-head, so don't ask him a question about gear unless you have at least an hour to kill, and also enjoys teaching climbing skills and guiding with a focus on newer climbers and gym-to-crag efforts.
Brian got his start climbing in the Allegheny National Forest in northwest Pennsylvania. Currently he’s our Head Routesetter, meaning he’s responsible for the week to week routes and problems that go up on ASCEND’s walls. He loves hearing from climbers and talking about climbing. When he’s not setting, he’s climbing, getting ready to climb, or recovering from climbing.
Sara was drawn to climbing by the community’s engagement in fitness, training, and adventure. Her experiences in the traditional fitness industry as a Program Director, Personal Trainer, and Group Exercise Instructor provide a strong foundation for coaching climbers of all levels to send their project, reach the next grade, or improve their technique and endurance. When she’s not climbing, training, or coaching, Sara is probably hanging out with her two dogs and two cats.
Although new to the climbing world, Catlyn is no stranger to fitness. She was a swimmer, has a CrossFit L1 certification, and has most recently started powerlifting. You can likely find Catlyn picking things up and putting them down in the fitness area or hanging out in the kitchenette (because that's where the food is). Feel free to come and chat about fitness, pizza, or craft beer.
Jason was a first grade teacher for 12 years before returning home to become ASCEND's Youth Director. He is passionate about using adventure sports as a means to grow strong, kind human beings. When not in the gym Jason loves getting outside to train for endurance events such as triathlons and mountain adventures.
Jill was an art teacher for 8 years before moving to Pittsburgh and starting to work at ASCEND. She works with youth during summer camp, but you can most often find her behind the front desk. Outside of work, Jill enjoys riding her bike, cooking (and drawing!) vegan food and taking care of her adorable foster toddler.
A Los Angeles native, Sonora fell in love with climbing while studying fine arts at Colorado College. She brings that passion to her various mural projects around ASCEND. In her free time, she enjoys making art, hiking, and relaxing with her husband and their adorable puppy.
Jonathan started climbing as a student at Pitt in 2006 when he joined the Pitt Outdoors Club. After jumping into all types of climbing, bouldering, sport, and trad, he began teaching new students how to climb, taking over running the climbing program of the club from fellow ASCEND employee Todd McCormick. After spending several years in a job that didn't give him time to climb he joined the ASCEND team to work with awesome people and pursue his climbing passion.
Lauren's yoga practice began in 2008, but her passion for it continues to grow. Lauren is from a small town on the outskirts of Youngstown, OH. She created a yoga community there that is still alive today. That brought her much joy, but is now humbled to have established a yoga family in Pittsburgh, a city that at first intimidated her, but now calls home. Her psychology degree translates into a love for people and meeting others where they’re at on their journey, which you can notice in her teaching style. Although she may be at the heart of ASCEND’s yoga program, it surely wouldn’t beat without the amazing team and community by her side! Lauren stays busy working two other jobs, enjoys time with family, being spontaneous, traveling, camping, and live music with friends.
Levi Redcross started his yoga practice in 2013 before becoming registered yoga teacher in 2016. After finding and teaching yoga at ASCEND, he found that climbing was a great complimentary workout for yoga practitioners. He also enjoys backpacking, knitting, and coffee.
Heather is a Pittsburgh native that was introduced to climbing in high school at North Allegheny. She was a part of their after school climbing club for her last year of high school then went on to the Art Institute of Pittsburgh, from where she graduated with a Graphic Design Degree. Today, she gets the best of both worlds, being apart of ASCEND as a Manager and their Marketing Team. In her spare time she enjoys exploring the great outdoors with her friends and family along with her dog Reggie.
ASCEND Pittsburgh is looking for experienced workers to participate in a dynamic, team-oriented environment. Positions can be part- or full-time. Compensation and benefits will be commensurate with experience and qualifications. No matter the position, ASCEND demands teamwork and cross-training, occasionally calling for, but not limited to, customer service, retail sales, coaching, cleaning and maintenance, special events, and/or administrative duties.
ASCEND Pittsburgh is managed by Pittsburgh-based climbers whose mission is to build-upon and grow an already developed community of climbers and fitness-driven individuals in the Southwestern Pennsylvania area. ASCEND aspires to live up to the standards set by some of the best gyms in the world and to become a nationally recognized collaborator in the industry. Please consider joining an energized, talented, and motivated team and becoming a positive influence on new and existing climbers that walk through ASCEND’s doors.
ASCEND fosters a holistic, community-based, climbing and fitness experience.
We strive to provide the best climbing and fitness experience for our customers. From excellent equipment to knowledgeable staff, our gym will be a top-notch operation. The space will be one that fosters community and belonging, by being more than just a climbing gym: it’s a “third place” where customers can feel just as comfortable as they do at their workplace and their home, and where our customers want to simply be.
Our business will not just be run to make a profit, but to also be a benefit to its employees, members, the immediate neighborhood, and the region. We will seek to create a sustainable business model, focused on longevity and capable of growing morally and responsibly.
We see ourselves as part of a larger climbing ecosystem within the communities of Pittsburgh, Western Pennsylvania, and America. We take our roles as climbing ambassadors very seriously, and we support causes that affect our sport such as land access, environmental stewardship, local legislation, and human-rights.
We understand that ASCEND isn’t able to provide everything for everyone. That’s not a problem though, because we have some pretty awesome friends.
Promoting responsible development and preservation of climbing and bouldering in southwestern Pennsylvania.
Members participate in activities as diverse as mountaineering, rock climbing, skiing, scuba diving, canoeing, kayaking, caving, cycling, backpacking, environmental and community service projects, and a host of outdoor sports.
A member-supported local non-profit organization working to make it easy for you to get outside.
With a focus on Advocacy, Education, and Community, Bike Pittsburgh is transforming our streets and communities into vibrant, healthy places by making them safe and accessible for people to bike and walk.
Your guide to sweat spots, healthy eats, and upcoming races in Pittsburgh.
Preserve and promotes access to climbing areas, and to conserve climbing resources in the New River Gorge and surrounding areas.
A passionate team of slackline enthusiasts who share a love for the Pittsburgh community.
Supports the growth, health, independence and professionalism of the climbing wall industry.
An independent news outlet dedicated to covering the indoor climbing industry.
Threats to our climbing areas come in many forms—and we must act quickly and nimbly to protect them.
A united community of competent climbers and healthy climbing landscapes.
To inspire and support a culture of American mountain craft.
World leader in climbing wall design and manufacturing.
The climbing gym bouldering flooring of choice.
The gold standard in mountain safety and rescue since 1938.
Need to alter your membership status? Submit a request.
Want to know what makes us tick? ASCEND's team and mission.
Interested in working at ASCEND? Read up and apply.
For holiday closures, please refer to our Google listing.
© 2019 ASCEND | Pittsburgh Indoor Rock Climbing Gym All rights reserved.
|
{
"timestamp": "2019-04-21T02:53:16",
"url": "https://www.ascendpgh.com/about",
"language": "en",
"source": "c4"
}
|
(More customer reviews)The editorial is wrong, this has 20 episodes (2 DVDs) and is put together better than the $1 DVDs that Digiview released. Since this title is out of print, it is very unlikely that the final 20 episodes will be released on a second volume (though I am hoping they will release it once times are better). Hopefully this will happen, as Digiview did release the complete series of U.B.O.S. earlier this year (quite unexpected). With the lead voice of Scott McNeil as Nick Logan, this is a very good series to own.
The complete pilot season of Roswell Conspiracies - 10 episodes in all, over 250 minutes. Voted the most compelling animated science fiction series in 1999, but did not last due to lack of advertising. It did however spin off a popular Playstation game. The story begins with Nick Logan, a skilled bounty hunter who in the normal course of business, accidentally tracks down an alien. He is unwillingly recruited by a secret government agency operating in Area 51, and late teams up with Sh'lainn Blaze, an alien with special powers from the Banshee planet. Their job is to track down various extraterrestrial beings who arrived on Earth centuries ago and are hiding among us. Alien enemies include the yetis, an alien race who are believed by humans to be vampires, the Aesiri race (who are mistaken for Norse/Viking deities), the Cerberus (a 3-headed parahound), Cyclops (mechanical giants built by aliens), Golem (stone creatures who are easily camouflaged), Lycanthrope (warewolf aliens), and many more. Set includes 2 DVDs.
Copyright © 2011 Man VS Wild Full Episodes All rights reserved.
|
{
"timestamp": "2019-04-21T00:29:45",
"url": "http://manvswildfullepisodes.blogspot.com/2012/04/roswell-conspiracies-aliens-myths.html",
"language": "en",
"source": "c4"
}
|
Indicators were updated with the most recent data available in the latest (2016) release unless otherwise stated. Data are subject to minor revisions over time.
(15 Oct 2018) Correction to Indigenous infant mortality rates for Northern Territory, 2013 to 2016.
(25 Sept 2018) Additional reference to the 3-year period in the footnotes of the Infant mortality data table.
|
{
"timestamp": "2019-04-24T16:16:11",
"url": "https://www.aihw.gov.au/reports/children-youth/childrens-headline-indicators/notes",
"language": "en",
"source": "c4"
}
|
A famous dessert wine, Pedro Ximenez is known for its wonderfully sweet, rich and dense flavor. Translated into vinegar, the result is full-bodied but still fairly light in texture, with a seductive dark color.
Ingredients: Pedro Ximenez Aged Wine Vinegar. Contains naturally present sulfites.
Q: how much glaze can youi take once a day. is it like wine or a drink ? is it considered a wine or just for salad dressing. is sulfite safe to take ?
A: This product is not a drinking wine liquor. It is used usually in salad dressings or marinades. Sulfite is considered safe to consume.
|
{
"timestamp": "2019-04-26T02:15:47",
"url": "https://www.gourmetfoodworld.com/los-villares-sweet-pedro-ximenez-vinegar-11656",
"language": "en",
"source": "c4"
}
|
story of the Joads in about 20 verses.
and an absolutely brilliant performance.
Ashley won first place in the Intermediate Fiddle competition.
onto my honorable mentions list for 2000 anyway.
background, but it's unobtrusive and very atmospheric.
their 80s, playing and singing their hearts out.
this feat alone they deserve some kind of Major Award.
and the origins of funk.
and now we have this record again.
because it was produced by my friend Fred Jasper, either.
And then, I ran out of time. D'oh.
|
{
"timestamp": "2019-04-25T08:32:05",
"url": "https://www.gumbopages.com/downhome/playlists/20010120.html",
"language": "en",
"source": "c4"
}
|
The Exhibition is on display at Montgomery Country Community College February 5 - March 16 ,2019.
Congratulations to the following ten students whose artwork has been entered in the 41st Annual Montgomery County High School Exhibit.
This is a great opportunity for our students to exhibit their Fine Arts skill and their vision among a wider selection of Montgomery County's talent.
All are welcome and invited to this fine exhibit.
|
{
"timestamp": "2019-04-23T16:01:25",
"url": "https://www.lschs.org/about-la-salle/news-events/news/p/~post/ten-fine-arts-student-work-on-display-at-annual-montgomery-county-high-school-exhibit-20190204",
"language": "en",
"source": "c4"
}
|
For anyone who has ever visited our Diocesan offices, receptionist Ella Roanhorse has become like a longtime family member, have served 4 Bishops over 3 decades. Now, as Ella retires, Bishop Wall discusses her family, faith, and how Catholicism has impacted her life.
11:04 – how has her Catholic faith shaped her?
|
{
"timestamp": "2019-04-24T00:25:54",
"url": "https://voiceofthesouthwest.org/cc045",
"language": "en",
"source": "c4"
}
|
The International Construction and Utility Equipment Exposition (ICUEE), slated for October 3 to 5 in Louisville, Ky., will let industry professionals and engineers explore some of the latest technology innovations related to mobile equipment and fluid power. Of particular interest will be the opportunity to get a hands-on look at hundreds of new machines ranging from aerial lifts and skid steers to trenchers and forestry equipment—along with the latest hydraulic components, systems and controls that make them go. Here’s a quick overview of just a few of the newest products and machines that will be on display.
JCB will showcase its recently introduced Hydradig, what the company calls a “revolutionary, new tool-carrying machine that delivers unparalleled visibility, stability, maneuverability, mobility and serviceability” for urban construction, highway maintenance and municipal contractors.
The Hydradig is powered by a Tier 4f EcoMAX diesel engine and has a sturdy, all-wheel drive, four-wheel steer chassis based on JCB’s proven Loadall telescopic handler. Its hydrostatic drive combines a variable-piston pump, a variable-piston drive motor and a central transfer box to power both axles. This layout offers a stepless 0 to 25 mph range without multiple gears or a loss of traction when speeds change. The machine is equipped with two-wheel and four-wheel steering modes, and crab steering for maximum maneuverability on site.
According to company officials, a key requirement was to lower the machine’s center of gravity, to boost stability and mobility. As a result, the engine, driveline, hydraulic pump and tank, and diesel tank all mount on the lower chassis, making the Hydradig incredibly stable during lifting operations—even without stabilizers. That also gives the upper structure a reduced tailswing of just over 4 ft, about 30% less than competitive machines. This permits work in confined construction sites or within a single-lane roadway.
A high-flow auxiliary circuit is standard, and the machine can be equipped with two low-flow circuits, plus dedicated hydraulics for quick-hitch operation. Fully guarded hose-burst check valves are available on the boom, dipper and bucket rams for optimum lifting safety. An optional hand-held tool circuit lets operators work with hydraulic tools like breakers and road saws. The JCB Hydradig is a versatile tool carrier and can be used with nearly 50 different attachments, making it suited for wide-ranging applications.
Terex HyPower IM for telescopic aerial devices lets users take full advantage of a machine’s hydraulics while reducing fuel consumption and exhaust emissions. HyPower IM is an efficient and lightweight idle-mitigation system. It includes a 48-V lithium-ion battery circuit that charges from either a standard 120-V plug-in or the engine alternator during road travel. It’s similar to but more economical than a hybrid system.
The system automatically switches from battery power when the truck is idling to engine-supplied power when hydraulic controls engage. According to Terex officials, the aerial hydraulic controls on a typical trouble truck are only engaged for about one hour in a normal eight-hour shift. By switching the hydraulic system to engine power during those brief intervals, HyPower IM provides emissions efficiencies plus optimum hydraulic control functions. The transition is seamless, and operators experience no lag time in hydraulic responsiveness.
In addition, HyPower IM keeps the truck cab heated or cooled without the engine running. The unit is currently available for Class 5 Chassis, such as Ford, Dodge, and GM trucks, used with Terex Hi-Ranger telescopic aerial devices.
HAWE North America’s EV2S-BT electronic proportional amplifier controls all standard proportional solenoids, including solenoids for directional and pressure valves, and pump controllers. The amplifier is designed as a plug which simplifies assembly. Preset parameters for most common types of mobile and industrial hydraulic valves significantly facilitate start-up operation. Standard input signals include 0 to 10 Vdc, 4 to 20 mA and CAN bus. Direct connection to a CAN network, and data within the device, can relieve the main machine control of many tasks.
The amplifier is also equipped with a Bluetooth interface, letting the EV2S-BT be installed in inaccessible places and controlled wirelessly using the HAWE eControl App via a smartphone. Users can display or set important parameters—like input signal, minimum and maximum current, dither and ramp times—in seconds; nominal value, output current and device temperature are displayed in real time.
Configuration work can also be stored, loaded and replicated quickly. This is especially valuable for applications with series production. EV2S-BT users can download the HAWE free eControl App from the App Store or the Google Play store.
The PVG load-independent proportional valves from Danfoss Power Solutions help users meet requirements for high control and productivity with optimum safety, and at the same time minimize emissions from mobile machines. The broad range of modular valves is designed to handle complex control challenges and demanding machine tasks.
The electrohydraulic valves permit flexible and customized system design and provide for a variety of configurations—from simple load-sensing solutions to CAN bus communication—ensuring smooth machine control. And because PVG parts are interchangeable, valve specifications can be easily altered to accommodate new functions and meet rapidly changing market needs.
Users can devise a valve stack for most any work and control task incorporating both simple load-sensing and advanced electrically controlled load-independent proportional flow valves. Load-sensing technology provides higher efficiency and safety, lower energy consumption and longer system life. It also reduces wear and tear on other components in the system. Load-independent flow control enables precise operation and improves productivity.
The PVG 100 post-compensated flow sharing valve lowers the oil flow to all basic work functions in response to a limited supply from the pump. In addition to enabling a smaller pump, flow sharing helps prevent power losses—optimizing productivity when less power is available.
The Hydra-Qube from Harrison Hydra-Gen is a compact, lightweight and efficient hydraulic fluid-conditioning module for mobile systems, permitting continuous hydraulic operations while controlling oil temperature and filtering return-line oil. Hydra-Qube uses a 3 to 5 gal reservoir, compared with a traditional tank as large as 75 gal. The all-in-one module includes a heat exchanger, reservoir and oil filter, and it readily mounts and integrates into a work truck. Two sizes are rated for up to 25 and 50 gpm flow. It uses a 12 Vdc-powered cooling fan and has an optional pop-up filter dirt alarm.
Dur-A-Lift’s new DAT3 articulating telescopic aerial lift is a bucket truck that features a non-overcenter design for greater stability and side reach, as well as a novel upper telescopic boom. It provides a working height to 75 ft and maximum side reach of 48 ft. The unit features a closed-center, pressure-compensated hydraulic system with joystick control at the platform, an automatic on-demand throttle system, individual outrigger controls and an outrigger/boom interlock. It also has a hydraulic platform-leveling system with platform tilt, and the hydraulics permits 360° continuous rotation. A 25-gal hydraulic reservoir includes a shut-off valve, and there’s a set of hydraulic tool outlets below the point of rotation. The DAT3 is also available with the company’s new Outrigger Analyzer.
|
{
"timestamp": "2019-04-18T12:53:22",
"url": "https://www.mobilehydraulictips.com/icuee-offers-hands-look-new-products-machines/",
"language": "en",
"source": "c4"
}
|
Creation Festival - Creation Festival Playlist - Welcome to The Overflow Devo Creation Festival. The Overflow has partnered with your favorite 2014 Creation Festival artists to bring you this reading plan. During this devotional plan musicians like the Chris Tomlin, Tedashii, the Newsboys and more will share devotionals based on songs heard at Creation Fest.
Welcome to The Overflow Devo Creation Festival. The Overflow has partnered with your favorite 2014 Creation Festival artists to bring you this reading plan. During this devotional plan musicians like the Chris Tomlin, Tedashii, the Newsboys and more will share devotionals based on songs heard at Creation Fest.
|
{
"timestamp": "2019-04-26T05:50:39",
"url": "https://www.bible.com/reading-plans/987-creation-festival-the-overflow-devo",
"language": "en",
"source": "c4"
}
|
I used to go to the Church Youth Club around 1972 – 73. I cannot remember much about what we got up to, apart from a memorable performance by a band called ’57 Chevy which comprised the late Csaba Kerekes, his brother Zsolt, Ed Bryant and possibly Ric Britt on drums. I wonder if anyone else remembers those times?
As a teenager in the 1940’s, I lived near Preston Park railway station and my church was Clermont. But I can well remember attending the dances which were held in the church hall at the Good Shepherd Church. So typical of those days when most boys were rather shy and pretty awful dancers. I recall that the girls all seemed to sit one side of the hall and the boys on the other side, trying to summon up the courage to ask a girl for a dance. I don’t remember much about who provided the music, but I do smile when I look back at those church hall dances which were so typical of those days.
When visiting Brighton recently, we were told of an area in Preston Park that was designed for blind persons. We went to the park – one person sent us in one direction, another somewhere else. After a lot of walking, up and down the park we gave up. Why is such an area not signposted as nobody is sure where it actually is?
Jo, I remember Csaba and his brother. I was in the same class with Csaba at Cardinal Newman and we hung out a lot. I was so shocked when I heard he had died. Good memories of those days!
|
{
"timestamp": "2019-04-25T12:43:02",
"url": "https://www.mybrightonandhove.org.uk/places/placechur/church-of-the-good-shepherd-dyke-road/church-of-the-good-shepherd",
"language": "en",
"source": "c4"
}
|
Ideally located in a tranquil spot near the heart of a thriving market town, this tastefully refurbished cottage makes a delightful holiday home for a family looking to enjoy the Norfolk countryside.
Perfectly located in a quiet part of the lovely Georgian market town of Holt, this charming cottage is an easy stroll from a variety of restaurants, pubs, antique shops, book shops and art galleries. You can also follow the Holt Owl Trail, explore the beautiful 100-acre Holt Country Park, or take a trip on a steam train. Among many local attractions are Norfolk’s only working watermill at Letheringsett, the ruins of Baconsthorpe Castle and Binham Priory, Holkham Estate, Pensthorpe Natural Park and the Muckleburgh Military Collection. Popular coastal towns and villages include Wells-next-the-Sea, Brancaster and Cromer. This is also a fantastic area for nature-lovers, with numerous nature reserves to discover, including those at Blakeney, Cley and Sheringham.
On entering this lovely and spacious cottage you will find yourself in the light and welcoming lounge. With comfortable seating, TV, DVD, iPod dock, CD and a living flame gas fire, this is an ideal space to relax in at the end of a delightful day. A step up through double doors lead to a large and bright dining room with an additional reading area. Heading into the kitchen, you will find it fully equipped with an oven, microwave, fridge/freezer, washing machine and dishwasher. There is also a ground-floor shower room with WC. Heading upstairs, there are two cosy bedrooms: an attractive twin room with a feature fireplace, and a peaceful double room overlooking the back garden. There is also a family bathroom complete with a corner bath and WC.
Stepping outside, you will find a lovely garden with a patio area and a large lawn. There is also a furnished summerhouse. The garden is well-screened with hedges and is an ideal space to enjoy a BBQ. Parking is available for two cars - 1 large car and a small car.
|
{
"timestamp": "2019-04-25T08:03:13",
"url": "https://www.thenorfolkcottagecompany.com/cottages/avocets",
"language": "en",
"source": "c4"
}
|
There are numerous reasons manufacturers offer a variety of material choices for bore brushes. The b..
Cleaning your firearm has never been this easy. From precisely designed brushes and cleaning tips to..
Gunslick Cotton Patches effectively remove copper, lead and plastic. They also boast greater absorbe..
Hoppe's Bore Cleaning Mop are soft cotton swabs that will not harm the bore. These mops are perfect ..
These Hoppe's square cleaning patches feature a uniform weave and are pre-cut to avoid fraying. Perf..
Use the Hoppes gun cleaning patches to clean your firearm's barrel. Made from ultra-absorbent and un..
|
{
"timestamp": "2019-04-23T18:35:36",
"url": "http://www.gunsngear.com.au/cleaning/patches-mops",
"language": "en",
"source": "c4"
}
|
The moment Amber Rojas welcomed her fifth child to the world – a little girl named Amadeus – she knew she was going to be special.
Amber recalled Ami felt “really limp” to hold, and had much smaller eyes than her siblings. She also had a low resting heart rate when she was born, a sign of a heart defect which is common among babies with the condition.
The family took the newborn to the hospital, where doctors confirmed their suspicions.
“We didn’t care that she had Down syndrome because we were all obsessed with her!” she said.
Being 35-years-old, Amber knew she was at higher risk of having a baby with a disability. But there were “zero” signs throughout the pregnancy (even after a sonogram) that indicated this would be the case.
And while at first Amber's other children were worried that their baby sister would be made treated differently, Amber has worked hard to make this a “positive experience” for her family.
“Our family was going a million different ways, and Amadeus has brought us together,” she says. We are learning together about a whole community that we never knew anything about!"
"At the end of the day she is our baby and we are her family," she added. "To us she is perfect."
|
{
"timestamp": "2019-04-26T03:53:08",
"url": "https://www.thatslife.com.au/birth-photo-captures-moment-mum-learns-daughter-has-down-syndrome",
"language": "en",
"source": "c4"
}
|
Dance Forum held earlier this month.
project is the senior class' official gift to the college.
it moved to this location.
across the nation are experiencing, said John Lassen Director of College Admissions.
housing for all the visitors.
the specific department answered by professors.
student for a couple days,"
|
{
"timestamp": "2019-04-21T04:39:24",
"url": "http://content.clic.edu/cdm/ref/collection/p15186coll6/id/7589/",
"language": "en",
"source": "c4"
}
|
"Impossibile aggiornare il registro di sistema.
Is there someone who can help me fixing this thing or has already had this kind of problem? Thanks for any help you'll provide.
Note for the mod: if there's already a thread like this, please forgive me but I didn't browse the forum in the appropriate way.
Run one time as an administrator to get through the Import Previous Settings wizard. It analyzes the audio card and stores the status in the registry. It will run after that without elevated privileges.
I still prefer PA9 over later cakewalk releases for MIDI editing without the audio frills. CAL is cool.
If you haven't already done so: Before doing anything, right click the setup file and set it's compatibility mode to the last known working OS (XP sp3). Once installed do the same for the Cakewalk exe files.
Since you've already installed it, I would 1st uninstall it and clear the registry of any Pro Audio listings (delete them).
I have installed several old programs this way and they work reasonably well with only minor glitches here and there.
|
{
"timestamp": "2019-04-20T18:14:36",
"url": "http://forum.cakewalk.com/Pro-Audio-9-and-Windows-10-m3392846.aspx",
"language": "en",
"source": "c4"
}
|
The lack of vigorous and consistent policy, particularly from the federal government, is unacceptable. The visual arts provide a high level of service while receiving an unjustly low level of support from most government agencies and departments. In a time of global challenges calling for dialogue and understanding, the Canadian government has cut support for our international cultural profile. The unique and diverse character of Canada is under threat. The visual arts offer the best opportunity to counter this threat. It is time to recognize the place of visual arts at the centre of society.
* To strengthen the institutions that advance the visual arts.
7. To recognize and support the leading role of visual arts in strengthening Canada’s international profile.
Show your support, sign the statement here, and forward the link to your colleagues.
* Even if you did not attend the Visual Arts Summit, we encourage you to support the petition.
|
{
"timestamp": "2019-04-20T21:04:23",
"url": "http://www.carfac.ca/news/2007/12/01/collective-agenda-for-the-visual-arts/",
"language": "en",
"source": "c4"
}
|
Home / Esports / Mark Ein reveals the Washington Justice for Overwatch League Season 2.
The deadline for the formal announcements of the Overwatch League rosters passed on December 1st. However, the Washington Justice which revealed its branding today has yet to announce its roster. Washington Esports Ventures, a sports organization founded by Mark Ein, owner of the Washington Kastles of World Team Tennis owns this franchise. Their investment in esports comes at a time when esports is seeing increasing viewership numbers and potential growth. The Washington Justice is an apt name for a franchise situated in the nation’s capital region.
Here is a look at their Logo and their colours. The Red and Blue Colour scheme definitely is representative of the American Flag. The patriotism feel of the team is clearly visible in its name as well as the colour scheme. The bottom of the shield forms a subtle “W” in tribute to the region, centred on the Washington Monument. The shield is crowned with a single white star in a blue setting as an ode to the American flag.
The team has not yet revealed its full roster despite the final deadline for the same already over. The official press release states that they will reveal their roster in the ‘upcoming weeks’.
WizardHyeong as the head coach for the team. WizardHyeong was one of the most sought-after coaches for Season 2 of the Overwatch league. He led NYXL to one of the more remarkable start for the OWL season 1. However, he was unable to help NYXL over the top when it mattered the most. New York Excelsior lost in the semi-finals of the League to Philadelphia Fusion.
The Overwatch League Season 2 starts on the 14th of February. However, we will see more roster reveals and information about the OWL teams before the start of the season.
|
{
"timestamp": "2019-04-22T00:38:43",
"url": "https://www.sportsmonks.com/esports/mark-ein-reveals-the-washington-justice-for-overwatch-league-season-2/",
"language": "en",
"source": "c4"
}
|
Forensic, Death & Murder Scene Cleaners Melbourne .
With an unbeatable track record, the team from Biohazard Trauma and Crime Scene Cleaning are ready to clean any Forensic Scene in Melbourne .
Servicing Melbourne our specialist Forensic Cleaners are fully trained in the remediation and clean up of death scence, suicides, homicide and Work place accidents both residential and commercial in and around Melbourne .
Unattended deaths in Melbourne are the worst scenes to clean as the odour from a dead body releases some seriously dangerous gases during it's stage of decomposition. Not only do the area smell like nothing from this world but it's also very toxic and should be avoided until Melbourne forensic cleaning technicians have sterilised the area and decontaminated the air.
Melbourne Forensic cleans are in most cases covered by your insurance company. We would advise you contact your insurer to make sure you're covered should for a forensic clean up prior to booking the service.
Bloodstains, body fluids and scenes that will make most people ill just from the sight are no match for our professional forensic cleaners from Biohazard Trauma and crime scene cleaning Melbourne .
|
{
"timestamp": "2019-04-25T20:51:14",
"url": "http://crimescenecleanups.com.au/murder-cleanups/melbourne.html",
"language": "en",
"source": "c4"
}
|
Helena Zabranska, a treasured colleague with RFE/RL’s Multimedia Unit, passed away January 23, 2017 after a long struggle with a chronic illness. She was 50 years old. She is survived by her husband Marek and their daughter Bara, and is remembered by her coworkers for her generosity and dedication.
Helena joined RFE/RL in 1997, first in the Communications Department, where she worked on the RFE/RL Insider newsletter, keeping staff informed of the latest corporate news and events. She joined the photo library team in 2008 as a graphic database librarian working with journalists across RFE/RLs language services and bureaus to select photos for news stories. Though her health condition required her to work from home for the last several years, she remained a vital part of RFE/RL’s mission and work.
Helena was an avid photographer and graphic designer and enjoyed spending time with her family and beloved pets. She will be deeply missed.
A funeral service will be held at the Church of the Most Sacred Heart of Our Lord (Kostel Nejsvětějšího Srdce Páně) on Jiriho z Podebrad Square in Prague on Tuesday, January 31, 2017, at 11:00 a.m.
|
{
"timestamp": "2019-04-21T02:26:02",
"url": "https://pressroom.rferl.org/a/helena-zabranska/28262958.html",
"language": "en",
"source": "c4"
}
|
- I love how Paul establishes his position right out of the gate. Unlike the “titles” we read in this world’s signature lines, Paul made it a point to proclaim that he was on earth to do Christ’s business. Do you ever lie in bed at night and wonder what God’s will is for your life? 1 Thessalonians 4:3 says, “It is God’s will that you should be sanctified.” The word sanctified is an elaborate word which means “to be set apart.” God’s unique plan for you is to be set apart for His special purpose (2 Timothy 2:20).
- Let’s carve out this third verse before we get into this next section. Note that it says “…who has blessed us in the heavenly realms with every spiritual blessing in Christ.” It doesn’t say most, or some, or few…it says every. God doesn’t hold back from you. He slathers on the blessings thick, covering you with grace as you work effectively for Him.
4 For he chose us in him before the creation of the world to be holy and blameless in his sight. In love 5 he predestined us for adoption to sonship through Jesus Christ, in accordance with his pleasure and will— 6 to the praise of his glorious grace, which he has freely given us in the One he loves. 7 In him we have redemption through his blood, the forgiveness of sins, in accordance with the riches of God’s grace 8 that he lavished on us. With all wisdom and understanding, 9 he made known to us the mystery of his will according to his good pleasure, which he purposed in Christ, 10 to be put into effect when the times reach their fulfillment—to bring unity to all things in heaven and on earth under Christ.
- Verses 4 and 5 tend to trip up believers (and probably some non-believers) because it speaks of predestination. Let’s walk through this. First, note that God chose you before the foundations of the world. Since you weren’t born yet, there was no basis or effort on your part because you didn’t exist. This is important to grasp because it underscores how we are not saved by our own efforts.
- Secondly, when we arrive at the word “predestined,” we need to remember the context of this letter. Who is Paul writing to? The saints (holy people) in Ephesus. This is a letter written to believers and it does not say certain people are predestined for hell and others aren’t. Don’t insert words where God has chosen to be silent. God gives man freewill and while He may knock on your door, He’s not going to bust it down (Revelation 3:20). Choose your path wisely!
- Verses 6-10 are a testament of the blessings lavished on us. He’s provided Jesus (the pathway of salvation), redemption, forgiveness, riches of grace, wisdom, understanding, and clarity of His will. I’d say that is a cup that runneth over! Speaking of the clarity of His will, here’s an explanation I liked: When Jesus wrote His last will and testament for His church, He made it possible for us to share in His riches. Jesus then died, so His will would be in force. He rose again that He could become the heavenly Advocate (lawyer) to make certain the terms of the will were correctly followed (Wiersbe). He took care of it all folks. And in the Greek, all means all. And you didn’t have to do a single thing. Praise Him for His glorious grace and enjoy drinking from your overflowing cup o’ love.
- There’s the word predestined again. But notice it isn’t directed toward the person, it is focused on the plan (purpose) of the person. He’s got a plan, folks. Let God work the plan.
- The Trinity is fully represented in this chapter – God’s grace lavished on us through Jesus’ sacrifice, which is then sealed through the Holy Spirit when we believe. I’m so thankful that I’m not in this equation, other than as a benefactor. I don’t need to concern myself with earning my salvation or maintaining it – that is God’s business. I simply know that His will is for me to be sanctified (holy) more and more!
- This is a favorite scripture prayer of mine. I’ve prayed this specific Word over several people, and I have a dear friend I douse in these verses once or twice a week. I know God’s Word is living, effective, and sharper than any double-edged sword (Hebrews 4:12). I want these truths to be real for you (and me!). An awesome “truth nugget” is offered to us in verse 17: we can keep asking. Maybe you need to hear this today: ask again. When we ask in accordance to His Word (like in these verses), we can never go amiss. God is bound to bless us with every spiritual blessing as we rest in His grace. He desires that we be effective followers, who know the hope Jesus Christ offers.
- Verse 22 brings such encouragement: “And God placed all things under his feet and appointed him to be head over everything for the church…” No matter the trial, situation, or affliction…it’s under His feet. He is in control and the only way it becomes out of control is if we attempt to wrestle it away. This approach only exhausts us and diminishes the work Christ can do. My son Liam loves to pick me flowers or buy them at the store. Funny enough, my husband knows I’m not into flowers, but coming from an adorable (curly headed) five-year-old, you just can’t help but melt like butter inside when he brings them to me. Liam loves colorful flowers – the bright pinks, sunshine yellows, and vivacious blue daisies. It wouldn’t be my first pick personally, but it totally makes me gush knowing he was thoughtful and chose his “personality colors” to brighten up that glass vase. God works in a similar way. We are simply to be the (empty) vase. He then picks and chooses – based on His love for us – what flowers He desires for us to put on display. Be an empty vessel for Him – you’ll be so bright those non-believers will need shades. Amen.
Older PostWhen You're Coming Unzipped...Do This.
|
{
"timestamp": "2019-04-18T12:18:15",
"url": "https://www.divinelyinterrupted.com/blog/2018/2/1/accessories",
"language": "en",
"source": "c4"
}
|
There are 162 Sauce and Sweet recipes on Very Good Recipes.
See all sauce recipes or all sweet recipes.
Preparation: 5 min - Cooking: 5 min This delicious sweet and sour stir-fry sauce is made in a jiffy. It makes all your easy stir-fry dishes even more amazing. Ready within 10 minutes. The post Sweet and sour stir-fry sauce appeared first on ohmydish.com.
|
{
"timestamp": "2019-04-20T21:25:03",
"url": "https://verygoodrecipes.com/sauce/sweet",
"language": "en",
"source": "c4"
}
|
Check out a few easy beauty tips on how to prevent hair loss after childbirth. Say goodbye to broken, lose hair strands and feel wonderful post-delivery!
One of the early signs of pregnancy is the fact that women get prettier. Across trimesters of pregnancy, a would-be mother gets to flaunt her gorgeous tresses in style. Thanks to the amazing pregnancy hormones, estrogen in particular. Pregnant women especially experience a ‘good hair day’. Suddenly, the simplest of the simple hairstyle looks great, hair tend to become voluminous. But, in reality, the hair isn’t growing at all. The only thing that’s truly happening is that you aren’t losing hair you would typically do otherwise, such as during monsoon or a stressful phase.
However, after the childbirth, as soon as one has delivered her little bundle of joy, the postpartum blues hit and that’s when everything about her begins to look a bit sad, the stretch marks and the sudden weight gain. Hair is likely to be the worst affected area of the body. Hair loss is something most of the ladies after delivery/post-pregnancy often complain of.
To understand why hair loss occurs at different stages of one’s life and how best to tackle it, it is important to understand the normal hair cycles of growth and shedding. Before addressing the issue it is also essential to understand that hair loss and hair breakage are different.
The term ‘hair breakage’ is often used synonymously with ‘hair fall’, which is incorrect. When hair naturally falls from the root, you are experiencing hair loss and when hair unevenly breaks from the strand it is hair breakage. Hair Loss is multi factorial and needs a specialized product to specifically treat it. Although, hair loss is not completely preventable, it can definitely be arrested with overall care and regular maintenance especially after having a baby, that is at the time of post-pregnancy stage.
The knowledge of A-C-T hair cycle will help you understand when is the right time to tackle the issue before it’s too late to recover. Scalp hair grows in cycles with normally 3 phases-the Anagen phase which means the hair is in active growth phase, the Catagen phase which means the hair is getting ready to shed and the Telogen phase which means your hair is resting in between phases. Normally, each hair follicle cycles independently, so that while some hairs are growing, others are resting and others are shedding. Thus, the density of the scalp hair and the total number of scalp hairs remain stable. But if the Anagen phase hair follicles prematurely transition to the Telogen phase, resulting in a noticeable increase in hair shedding at the end of the Telogen phase then it is defined as hair loss which needs to be tackled.
The type of hair loss that new mothers generally experience belongs to the Telogen phase.
So, when a friend introduced me to “Livon Hair Gain Tonic for Women” and she personally showed me the difference after having applied it for 90 days, it got me going W-O-W!
So, ladies, home remedies do play a great role in preventing major hair loss, but the genuine hair loss issue requires a more specialized approach. Even before approaching a specialist, it is important to understand your hair loss and seek solutions and products with effective ingredients which can truly tackle the issue of real hair fall.
Try picking up a bottle of Livon Hair Gain Tonic right away. This magical potion will help in arresting hair fall and accelerating hair growth from the root of the problem in a scientific way. To know more about the product, how to apply it, etc., click here.
Avoid sleeping with your hair open. The strands entangle overnight resulting in massive hair breakage and damage.
Use a comb with wide tooth. Avoid hair brushes (flat or round). Don’t comb wet hair or blow-dry while they are still wet (at any cost). Let them dry down naturally.
|
{
"timestamp": "2019-04-25T16:23:10",
"url": "https://thechampatree.in/2015/10/05/easy-beauty-tips-after-childbirth/",
"language": "en",
"source": "c4"
}
|
End of preview. Expand
in Data Studio
No dataset card yet
- Downloads last month
- 9