text
stringlengths 18
161k
| meta
dict |
|---|---|
The long and short of it: This 14 Series Shower Control is a fully functioning Shower Faucet without the showerhead. It includes the Handle to control the Shower (on/off) along with the Rough-in Valve which installs in the wall. This item can work with any showerhead or handheld shower when plumbed correctly in the wall. It mixes the water from your hot and cold water lines in the wall and sends out a stream of warm water to whatever shower spray you choose.
Buy this Delta Cassidy Collection Polished Nickel Monitor 14 Series Shower Valve Control Only INCLUDES Single Lever Handle and Rough-in Valve with Stops D1863V Now!
|
{
"timestamp": "2019-04-19T09:32:55",
"url": "https://faucetlist.com/collections/all-shower-faucets/products/delta-cassidy-collection-polished-nickel-monitor-14-series-shower-valve-control-only-includes-single-lever-handle-and-rough-in-valve-with-stops-d1863v",
"language": "en",
"source": "c4"
}
|
Mike Morin’s legendary history includes stints in Detroit, Toledo and Washington DC radio before coming to Boston where he hosted The Morning Zoo on 94.5 WZOU. Later, Mike landed the morning show at 93.7 WCGY-Boston, 106.3 WHOB-Nashua, and most recently was host of New Hampshire In The Morning at WZID-Manchester. Some of you may also remember Mike as co-host of Candlepin Stars and Strikes on Channel 50 TV. Mike is a regular contributor to New Hampshire Magazine, has written 2 books about his famed radio career, TV’s golden age of Candlepin Bowling, and is currently writing a 3rd book about the 100 year history of the Historic Red Arrow Diner.
|
{
"timestamp": "2019-04-20T22:12:11",
"url": "https://wfnq.nh1.com/mike-morin",
"language": "en",
"source": "c4"
}
|
A multi-party coalition of current and former parliamentarians has concluded that anti-Semitic incidents are on the increase across Canada and have been fostered by a climate that is receptive to attacks on Israel, particularly on university campuses. But critics say the work of the Canadian Parliamentary Coalition to Combat Anti-Semitism (CPCCA) was nothing more than a poorly disguised attempt to suppress legitimate criticism of the Jewish state.
OTTAWA— The final report of the coalition, which has been investigating the nature and extent of anti-Semitism in Canada since November, 2009, was issued on Thursday – more than a year later than promised.
The coalition was formed outside the official workings of Parliament after 11 MPs, at the request of Immigration Minister Jason Kenney and Liberal MP Irwin Cotler, attended an International Parliamentary Coalition conference in London on combatting anti-Semitism around the world.
The group’s work has drawn criticism because central to its inquiry was acceptance of a new definition of anti-Semitism from the London conference, that, in addition to expressions of hatred toward Jews and Jewish institutions, includes certain undefined forms of verbal and physical attack against the state of Israel.
Over 10 days of hearings between November, 2009, and February, 2010, the CPCCA’s 22 members heard from 74 witnesses, including federal and provincial cabinet ministers, diplomats, university administrators, academics, chiefs of police, journalists and other interested individuals.
But many groups that do not embrace the new definition of anti-Semitism – including Independent Jewish Voices Canada, Seriously Free Speech, and Canadians for Peace and Justice in the Middle East – were refused the opportunity to testify.
The Harper government has been a staunch and unapologetic supporter of Israel since it came to power in 2006. In May, Mr. Harper blocked the inclusion in a G8 statement of a call for Middle East peace talks based on a return to Israel’s 1967 borders, an idea pressed by U.S. President Barack Obama.
Among dozens of recommendations, which are not binding on the government, the coalition said that police forces across Canada should be better trained to deal with anti-Semitism; the Immigration Department should take into account rising international anti-Semitism when designating source countries for refugees; and the Foreign Affairs committee of the House of Commons should study the United Nations’ criticisms of human rights violations by Israel.
Conservative MP Scott Reid, chair of the coalition’s steering committee, said at the news conference that it is deplorable that the UN repeatedly attacked Israel but overlooked human rights abuses in other countries.
Sid Shnaid, the co-chair of Independent Jewish Voices said the report simply repeats all of the misconceptions with which the committee began its work two years ago.
One major concern of the CPCCA was an event known as Israeli Apartheid Week that has been held on Canadian university campuses. The report said the committee was told this is an aggressive campaign to make pariahs of the Jewish state and its supporters.
But Mr. Shnaid said many Jewish students who are members of his organization are also involved with Israeli Apartheid Week and there is nothing anti-Semitic about it.
“What [the coalition members] are talking about is people who are very unhappy with the high level of organization of Palestinian solidarity efforts on campuses and they are trying to dismiss and discredit them in any way that they can,” said Mr. Shnaid, whose group promotes a just resolution to the dispute between Israel and Palestine.
The coalition includes MPs from three of the four federal political parties that were elected to sit in the House of Commons in 2008. MPs from the Bloc Québécois who were initially part of the coalition dropped out last year, saying the CPCCA was “biased” in favour of Israel and against Palestinians.
Mr. Reid’s office provided the administrative support for the coalition’s work. It is rare for an independent body of Parliamentarians to appoint themselves to work on a project and to get government resources.
The coalition was not compelled to explain its sources of funding.
Mr. Reid, the Conservative MP who chairs the CPCCA’s steering committee, said the final cost, not including expenses covered by taxpayers, was about $100,000, which was raised through anonymous donations from individual Canadians.
This entry was posted in CPCCA, Media and tagged CPCCA Report. Bookmark the permalink.
|
{
"timestamp": "2019-04-25T12:47:42",
"url": "http://seriouslyfreespeech.ca/2011/07/globe-mail-coalition-warns-of-rising-anti-semitism-but-critics-say-group-shows-israeli-bias/",
"language": "en",
"source": "c4"
}
|
The Advertising Club of New York recently announced the winners of the 2012 International ANDY Awards, and SVA alumni took four of the top prizes for work produced in Frank Anselmo’s “Unconventional Advertising” class. Bryan Hyung Ahn (BFA 2012 Advertising) and Jae Sung Jung (BFA 2011 Advertising) received Gold awards for their print projects. Ahn’s ad for IKEA riffed on the company’s infamous pictogram assembly instructions while Jung’s ad for H&M created minimalist backdrops to emphasize the low cost of the clothing.
James Kuczynski (BFA 2011 Advertising) and Dana Tiel (BFA 2011 Advertising) received a Silver ANDY for the paper sacks they crafted for City Harvest. The bags featured cut-outs of the stomach and digestive track to reveal a bounty of fruits and vegetables inside. Bo Mi Jo (BFA 2011 Advertising), Dahee Song (BFA 2011 Advertising) and Manuel Aleman (BFA 2011 Advertising) also created a project for City Harvest. Their Bronze-award-winning project featured an animated banner ad requesting that people remember to donate food to the organization.
In addition, Dea Eun Kim (BFA 2010 Graphic Design) also received a Bronze ANDY for his print campaign for the Weather Channel, “We Told You So,” a project created under BFA Advertising and Graphic Design faculty member Jack Mariucci’s guidance.
Established in 1964, the ANDYs began in New York as a competition designed to recognize excellence in print advertising. The ANDYs have since expanded internationally, honoring outstanding achievement across the industry by highlighting superior innovation and craftsmanship. Judged by a panel of world renowned creative directors, ANDY awards are given to both single and campaign executions.
To learn more about the ANDY Awards and to see the entire list of 2012 winners, click here.
|
{
"timestamp": "2019-04-18T21:15:52",
"url": "https://blog.sva.edu/2012/05/sva-alumni-win-top-prizes-at-2012-andy-awards/",
"language": "en",
"source": "c4"
}
|
The use of simulation has increased exponentially, especially in anaesthesia, which has leant itself well to the interface of technology. In particular, the last decade has seen a major increase in the use of full scale simulators in anaesthesia. This resource is a comprehensive review of simulators in anaesthesia.
|
{
"timestamp": "2019-04-19T07:22:07",
"url": "http://www.anaesthesiauk.com/SectionContents.aspx?sectionid=232",
"language": "en",
"source": "c4"
}
|
Art Collector – It’s a Steal!
Finding out you’ve purchased a forged piece of art is one of the most embarrassing, angering and anxiety-laden experiences for any collector. When a pricey forgery comes to light it’s a chilling ordeal, especially if it involves high-profile collectors and reputable galleries — such as the infamous Knoedler & Company scandal, where it was revealed that for nearly two decades the once-venerable New York art gallery sold tens of millions of dollars worth of forgeries, including to Toronto impresario David Mirvish. So how do you avoid the pitfalls of buying a forged work?
“They have to be willing to pay a lot,” says Mark Winter, veteran art appraiser of Art Experts Inc. Bargain hunting for art sets you up for trouble. “If you are desperately trying to speculate and to buy for very little something that is worth enormously more, you are making yourself a victim,” he says. Real art costs money, so be ready to spend market value. Don’t be fooled by heart-wrenching excuses, either — sellers who need quick cash to pay for a family member’s hospital bill are a dead giveaway. “When you buy under these circumstances, you buy quick, you buy at a low price. Bingo. You are buying a little forgery,” says Winter.
Paul Denis, curator of the Greek and Roman collections at the Royal Ontario Museum as well as the lead curator of its travelling exhibition “Fakes and Forgeries,” explains that forgers today are becoming quite sophisticated. Launched in 2010, “Fakes and Forgeries” does side-by-side comparisons of forgeries and authentic pieces to show the lengths forgers go to fool. It features everything from Greek statues to Mayan sculptures, minerals to fossils, hockey jerseys to computer software. “If it hasn’t been faked then it doesn’t exist,” says Denis.
Thanks to online resources and picture books of artwork and antiques, forgers have more insight into how objects should look and feel than ever before. In the past, forgers would often create and sell, for example, counterfeit ancient Greek coins made of silver. They wouldn’t, however, realize that certain coins needed to be a specific weight. Today they are much more clever. “They practically strike the coins and they understand that certain coins have to weigh certain amounts,” he says. Many fake coins he sees are beautiful pieces and some collectors will pay tens of thousands of dollars for them. But at the end of the day they’re still fake, just pieces of silver.
It might just save you from buying a worthless piece of silver.
COURTESY OF THE ROYAL ONTARIO MUSEUM © ROM.
|
{
"timestamp": "2019-04-18T18:59:42",
"url": "https://dolcemag.com/general-interest/specialfeatures/art-collector/17110",
"language": "en",
"source": "c4"
}
|
This free printable eBook features 24 popular proverbs for children, each accompanied by a full color illustration. Young kids read the proverb aloud, then trace the words/letters, then write the proverb. Educators can print the whole booklet, or go one page at a time, or have the children work using a tablet or iPad. This is a great way to get young children learning and thinking about proverbs, conveniently while learning print manuscript handwriting. Proverbs are an important part of the Common Core State Standards for ELA (English Language Arts), typically addressed in-depth during fourth grade. Click here to print. Click here to print a version of this workbook using the cursive script writing font.
|
{
"timestamp": "2019-04-20T21:09:36",
"url": "https://www.studenthandouts.com/texts/proverbs/dumpy-proverbs-for-children-free-ebook.htm",
"language": "en",
"source": "c4"
}
|
“We used Ruth Allen Photography for our wedding on 4th July 2015. I had looked through Ruth’s wedding photography images online and thought they looked great.
We were quite specific as to what we wanted from the photos- We wanted a lot of natural photos of my guests and couple shots but not too many posed shots.
We met Ruth a couple of months before the wedding to explain about our wedding, the venue, guests and explained our brief. She was very professional in her approach and nothing was difficult, she also added in her own suggestions which worked really well and she got what we wanted straight away.
On the day Ruth brought Sally her assistant along with her. Both girls were great! Really relaxed, friendly and chatted to all the guests a lot. It was great having them there as they were lots of fun and very approachable but weren’t in your face and demanding of our time. They got the job done very efficiently with out being shouty and bossy which is what I have seen in previous weddings.
We got the photos back really quickly and were absolutely delighted with them! They are amazing and they completely reflected the mood and atmosphere of the day.
We also decided to get a video done. Sally shot this on the day as well as taking still photographs. We completely love the video! I cry and laugh every time I watch it. It is finished so perfectly and professionally and we are both so glad we decided to go for it!
When we have shown the photos and video to friends who weren’t able to make the wedding they have all said they feel like they are there and we feel the same every time we watch it.
|
{
"timestamp": "2019-04-23T14:32:15",
"url": "http://ruthallenphotography.co.uk/portfolio-item/jack-catherine/",
"language": "en",
"source": "c4"
}
|
We can’t deny the days are getting shorter, which means that soon fall will be here. This easy project, will help to let you relax whilst enjoying the last few days of sun.
The wreath is easy to make and uses items you will already have in your home. It takes no time to put together, plus it smells amazing. It will look great inside or out and will help to calm you after the longest of days.
|
{
"timestamp": "2019-04-23T10:44:22",
"url": "http://www.diyhomeworld.com/dried-lavender-wreath/",
"language": "en",
"source": "c4"
}
|
Insolvency law is an extremely broad field of law that concerns everything from restructuring measures and bankruptcy to protecting the rights of creditors. For companies facing an insolvency situation, there exists a system of insolvency law that enables restructuring, corporate restructuring or the winding up of the business in an orderly manner.
Ekenberg & Andersson provides assistance in such areas as corporate reconstructions, compositions, payment moratoriums and liquidations, etc. We also advise on issues relating to liability for shareholders and directors of the board of companies.
|
{
"timestamp": "2019-04-23T06:45:34",
"url": "https://www.ekenbergandersson.se/en/our-practice-areas/insolvency-law/",
"language": "en",
"source": "c4"
}
|
Centerton Arkansas Best Onsite Computer System, PC and Printer Repair, Networks, and Voice and Data Cabling Services.
The Most Complete Onsite Tech Providers Coverage You Can Find in Centerton and Throughout the Entire State of Arkansas.
Centerton Arkansas On Site PC and Printer Setup, Config & Repair Services.
Our Centerton Tech’s Travel Right to You for Unequalled Onsite Computer System PC & Printer Repair Support.
Centerton Arkansas Top Rated Network Installs, Repair, Voice and Data Cabling Contractors.
We Have Pro Voice and Data Network Services Throughout Centerton Arkansas.
Nationwide Onsite provides remarkable voice and data networking services throughout the whole city of Centerton, Arkansas. Our expert trained, industry certified network and low voltage voice and data cabling service technicians perform an extremely wide range of onsite networking services daily throughout the state of Arkansas. We are the onsite tech service market leaders, and we have all of your onsite network setup, configuration, troubleshooting, repair, and structured cabling services covered. Our specialists likewise carry out onsite wireless wifi heat mapping evaluations, installation, and troubleshooting, along with full Point of Sale network and cabling support services. Whether you need troubleshooting or installation and configuration of existing network router, switch and hardware firewall devices, or troubleshooting and repair of your current structured cabling, our onsite network service technicians have it covered 100 %. Our high quality low voltage inside wiring voice and data contracting services have you covered for one single drop to thousands of cabling drops in your new or older building location, completely certified, with cabling certifications offered for all Cat5e, Cat6 and Coax structured cabling. Our certified telecom voice network specialists are on demand to carry out complete PBX and VoIP installation, configuration and repair, as well as full telecom voice network structured cabling end to end. So, whether you require full cabling installation for a brand-new office, or merely require configuration and repair of your current network cabling or voice and data jacks, we have the perfect onsite service for you. Give us a call today and see why many Arkansas businesses rely on our superior onsite network and voice and data cabling services! – (859) 780-2190.
Centerton Network and Telecom Setup and Repair.
Centerton Arkansas PBX and VoIP Setup Provider.
Centerton Pro Onsite Low Voltage Cabling Providers.
B2B Voice and Data Cabling Services for SMB, Point of Sale, Retail POS in Centerton.
Centerton AR Voice and Data Network Structured Cabling and Hardware Diagnosis and Repair Contractors.
Network Voice and Data Configuration Services Throughout Centerton.
Centerton AR Telecommunications Voice Structured Cabling for PBX and VoIP Telephone Equipment.
Professional Voice and Data Inside Wiring Services in Centerton.
Top Choice Voice and Data Network White Label Smart Hands Solutions for Managed Service Providers With Clients in Centerton Arkansas.
The Trusted Leader in Onsite Tech Solutions Throughout Centerton Arkansas.
Arkansas Trusted Commercial & Residential, SMB and B2B Onsite Technology Installation, Setup & Break Fix Repair Solutions.
|
{
"timestamp": "2019-04-24T16:01:49",
"url": "http://www.nationwideonsite.com/centerton-arkansas-onsite-pc-printer-repair-networking-voice-data-cabling-technicians/",
"language": "en",
"source": "c4"
}
|
My practice is in a quiet discreet location with easy parking right outside. My practice room is on the ground floor and is warm and comfortable.
I am happy to meet with you for a free 30 minute chat so that you can see where I work, get a feel for how I might work and you can ask any questions you may have. I will try and answer any question you throw at me.
Counselling can feel daunting and I understand that for some people it can feel difficult to know where to start. I try to ease that discomfort and work with you to try to work out where any difficulties lie and explore ways of making things easier for you.
I work with individuals, couples, young adults and teenagers in a warm, comfortable ground floor room in a quiet discreet location. I am able to offer day and some evening appointments. I am happy to meet with you for an initial meeting if you want to so that you can ask any questions before deciding if counselling is really for you. Ring me on 07531 555 878 to arrange a convenient time.
|
{
"timestamp": "2019-04-20T01:03:36",
"url": "https://www.bacp.co.uk/profile/5c9a6dca-4d90-e711-80e8-3863bb349ac0",
"language": "en",
"source": "c4"
}
|
Each mix is a 240g packet.
A great introduction to their breads, allowing you to savour them all and pick your favourites for future.
For specific details of each of the five mixes included in this pack please see the individual product pages.
Just add water. No kneading. All you need is a mixing bowl, spatula and baking paper!
Bold Buckwheat -Potato starch*, rice flour, buckwheat flour*, tapioca flour, pumpkin seeds, chia seeds, sourdough starter (3%), salt, stabiliser: xanthan gum *Organic Ingenious Flatbread-Potato starch*, tapioca flour, rice flour, sorghum flour, millet flour*, oat flour, stabilser: xanthan gum, salt, sourdough starter (1%), coconut sugar, gluten free oats, garlic *Organic Nearly Rye-Potato starch*, rice flour, buckwheat flour*, teff flour, sorghum flour, tapioca flour, caraway seeds, salt, sourdough starter (3%), stabiliser: xanthan gum, fennel seeds, coconut sugar *Organic New Italian-Potato starch*, rice flour, tapioca flour, sorghum flour, gluten free oat flour, stabiliser: xanthan gum, sourdough starter (3%), salt, gluten free oats, coconut sugar *Organic Super Sourdough- Rice flour, potato starch*, tapioca flour (modified), sorghum flour, sourdough starter (9%), millet flour*, salt, stabiliser: xanthan gum.
|
{
"timestamp": "2019-04-25T04:30:05",
"url": "https://www.yumbles.com/ranas-artisan-bakery/taster-pack-gluten-free-artisan-bread-mixes.html",
"language": "en",
"source": "c4"
}
|
Conveniently located Five BR home across Veterans from the Marriot.
House for rent in Florence.
Florence is the Place to be! Come Home Today!
Apartment for rent in Florence. Close to dining and 4PWSJG shops, bright, gas stove, trash included.
Outdoor: Deck Enclosed yard Outdoor Storage Porch, Private parking spot: 2. Rent: $650. Deposit: 4PE71T $600. footage: 1, 095. ft. Close to dining and shops, bright, gas stove, trash included.
HomeRentListings.com is a free resource for 35631 Florence, AL Rental home listings.
It offers latest Rental homes, owner homes, houses for rent, town-homes/condos for rent, multi family homes for rent and commercial property for rental home listings in 35631 Florence, AL.
If you are a buyer,you can find your dream home in 35631 here OR if you are a seller you can advertise your home listing absolutely Free on HomeRentListings.com today and reach thousands of buyers around the city.
|
{
"timestamp": "2019-04-24T05:00:25",
"url": "https://www.homerentlistings.com/AL/35631",
"language": "en",
"source": "c4"
}
|
In a world with Captain America, Spiderman, and the Fantastic Four can six teenagers take down their supervillain parents?
Quick note: I am watching the TV version at the moment and with one episode left in the season I’m not going to say which I like better at this point, but I am going to point out some differences/similarities between the two. However I am going to review the comics separately from the show and hopefully not compare the two too much.
For most of their lives Alex, Nico, Karolina, Chase, Gert, and Molly have been forced to hang together during the one night a year their parents get together for their PRIDE meeting. Instead of playing twister they decide to snoop, but discover them killing a teenager.
After debating what to do they run away and come up with a plan to take their parents down while discovering unknown abilities/telepathic dinosaurs.
They have a few tense fights with their parents before hiding up in a cave, learning more about what they can do, and eventually becoming their own superhero group.
This may sound stupid but when I go from watching a show to reading the comic I’m always taken aback by how fast things progress. Obviously shows drag incidents out, but what takes an entire season takes one comic. Nothing I’m complaining about; they make sense for their form of media.
One major change is how much time is spent on the parents. In the comic we barely meet them until discovering them in their supervillain outfits. There’s some backstory revealing why they do what they do and how it’s all for their kids. In the show there’s much more time to meet the parents and watch them interact with their kids.
And again it’s a show, it gets more time.
I’m not sure if it’s a better thing or not. I like spending time with the kids in the comic and watching them become closer. It works in the show too, but the show also makes me conflicted on the parents. In the comic they don’t seem like nice people, even after giving their “it’s for our kids” speech. There are plenty of times they could kill the kids. In the show they seem more dedicated to keeping them safe from what’s going on.
I think it’s funny a world-ending event is taking place and calling the Avengers puts you on hold. They have aliens to take care of. The Runaways are dealing with an ancient religion that wants to destroy the world.
When it comes to Marvel shows you just don’t know where they stand in the cinematic universe unless stated. In the comic everything is tied together.
I like to mention the artwork when it comes to comics. It has a “new-school” vibe to it. Colorful, bigger, but still impressive. The detail is fun to look at.
Yeah that’s all I got for that. It looks great.
Like I said I won’t say if I like this over the show, but it feels similar. The characters are likable, despite being teenagers and going through teenage-issues. I wouldn’t say it’s just aimed towards teenagers though, since there’s a pretty gruesome death in the third volume.
If you watch the show then you may know what’s about to happen, but for the most part they’re different. From the threat, to their parents, and a “mole” in the group who betrays everyone in the end. There are parts that still took me by surprise.
To be honest this is my first Marvel comic series and I’m glad it’s Runaways. From the outside it’s a group of misfits thrown together but as their abilities progress so does their love for one another and that is what draws me into this story. Comic and TV versions alike.
I loved the comics. I never read all of them because I couldnt find the last few. I really like the show too but I wish it was a bit faster like the comics.
|
{
"timestamp": "2019-04-25T00:40:53",
"url": "https://quibblesandscribbles.com/2018/01/02/book-quibbles-marvels-runaways-vol-1-3/",
"language": "en",
"source": "c4"
}
|
Little play on words, there, changing up theorists with 'falconists', heh heh.
"Despite widespread photographic proof to the contrary, some people claim that the Black Falcon's banners were coloured green and white in this set, and were changed to blue and white with the release of 1986's 6074 Black Falcon's Fortress."
Now, aside from the fact that I had at one point purchased a NIB Knight's Castle, and have personally seen for myself that the falcons have the same outfits as they do in the Fortress, I can't verify that because I already opened the thing and didn't record myself opening it on video, which maybe I should have done, in retrospect. But I've never come across someone who truly was convinced Knight's Castle's banners were different than Black Falcon's fortress's banners. I mean sure, it confused me that Catapult and Knight's Castle both were owned by Falcon knights, who had green/white flags(back before blue flags existed), but I just assumed that, 'Hey, I guess they changed things with the times', because green flags all but vanished later on, aside from seeing one in Guarded Inn, for a good while.
Going beyond that, I was slightly disappointed that King's Mountain Fortress had changed from yellow/red flags to red/blue flags, which I always thought of as belonging to the Black Knights(Black Monarch).
But for the sake of the argument, who here might have(or still does) subscribe(d) to this idea?
Also curious.... Did Lego plan in advance to use those white transparent shields from space set #452 Mobile Tracking Station for the lineup of Castle in 1984 when round grey shields appeared? Does anyone know? I was always curious why the circular shields appeared in the classic space theme first.
Zurem wrote: "Despite widespread photographic proof to the contrary, some people claim that the Black Falcon's banners were coloured green and white in this set, and were changed to blue and white with the release of 1986's 6074 Black Falcon's Fortress."
What exactly is the claim? That LEGO re-packaged certain 6073 Knight's Castle sets with newly colored blue/white flags in 1986, in an effort to be consistent with the colors that were released in 6074 Black Falcon's Fortress?
I suppose it's possible, but I find it highly unlikely.
First off, LEGO didn't seem to care much about consistency back then.
- Black Falcon's Fortress didn't even use any white flags (they actually had yellow flags of all things), and 6067 Guarded Inn, which came out the same year, used a green banner for its lone Black Falcon knight.
- 1987 was the only year to feature consistently colored banners for Black Falcons, using Blue/White (a combination they hadn't yet even used) in both 6062 and 6035.
Similar inconsistencies can be found with things like torso and leg color. The figure in 1986's 6041 Armor Shop being one of the strangest examples-- he looks like he was thrown together with spare parts. But also with things like 1990's 6018 Battle Dragon, which still baffles me in terms of intended factions.
So, I'd find it hard to believe that they made a conscious effort to be consistent considering how little attention they paid to it.
If green flags were removed from LEGO's production lines, you might make an argument that they tried to save money by using all 100% blue flags-- but since green flags were used in both 1986 and 1988, as well as 1991 and 1992 (and later), it wouldn't really make much sense. Plus, we know that at the time, LEGO didn't care much about cost-savings (or they probably would've used a blue flag for 6067 instead of green, for instance). Not to mention that LEGO probably would've wanted to re-photograph any re-purposed 6073 boxes with the new blue-flag artwork-- which would be surprising considering that the product was being removed from their offerings in 1986 anyway.
1) Some Black Falcon torsos (not any shields that I know of) were printed with the falcon head pointing to the LEFT rather than the RIGHT. I have about 3 of these myself, which I never noticed until someone pointed it out.
Zurem wrote: Also curious.... Did Lego plan in advance to use those white transparent shields from space set #452 Mobile Tracking Station for the lineup of Castle in 1984 when round grey shields appeared? Does anyone know? I was always curious why the circular shields appeared in the classic space theme first.
Well, before 1985, there were no 2x2 radar dishes for the space theme to use, apart from the round shield-- so it makes sense that they'd use that element in smaller space sets as a radar dish. It's possible that that was its intended use in 1979, and not as a castle shield, but it's hard to say (certainly the little handle that mirrored the triangular shield handle makes it more likely to be intended as a hand-held object).
davee123 wrote: Well, before 1985, there were no 2x2 radar dishes for the space theme to use, apart from the round shield-- so it makes sense that they'd use that element in smaller space sets as a radar dish. It's possible that that was its intended use in 1979, and not as a castle shield, but it's hard to say (certainly the little handle that mirrored the triangular shield handle makes it more likely to be intended as a hand-held object).
I was told that most elements were designed to be used in multiple themes. The castle theme was fairly groundbreaking in that regard because the military headgear and weaponry were not used in the other themes. However there was quite a bit of overlap between town and space elements in the late 70's and 80's although often in different colors.
Where do you go to dig up factoids on Castle Lego Sets?
Brickipedia is my main source. I know some of it is unofficial, but as far as I know, it's still a decent source, judging from cross-referencing personal knowledge of my own with facts provided by the website, at least as far as Castle is concerned. One thing it does is that it is sure to mention sets that have one-of-a-kind pieces, such as the brown cape in Blacksmith Shop(The 80s one).
|
{
"timestamp": "2019-04-24T02:59:26",
"url": "http://classic-castle.com/forum/viewtopic.php?f=2&t=25731&p=281427",
"language": "en",
"source": "c4"
}
|
Our Floral Necklace expands on our love of all things floral. A simple and delicate square pendant necklace embossed with flowers on a fine chain necklace.
Gold plated on sterling silver, nickel free, the chain features adjustable loops.
|
{
"timestamp": "2019-04-23T18:50:31",
"url": "https://www.luxefashionboutique.com.au/collections/luxe-essentials/products/luxe-essentials-the-flower-necklace",
"language": "en",
"source": "c4"
}
|
Welcome to my new podcast Dan Dan The Art Man's Book Reviews! This is episode zero where I explain what the podcast will be like so you know what to expect. Have a listen and enjoy.
|
{
"timestamp": "2019-04-19T19:01:41",
"url": "http://www.dandantheartman.com/2014/08/dan-dan-art-mans-book-reviews-episode-0.html",
"language": "en",
"source": "c4"
}
|
Harry Redknapp : I Tried My Best!
Harry Redknapp insists that he wants to stay with QPR, despite imminent relegation.
The 66 year old played down suggestions he was uncertain about staying with the west Londoners, reiterating that any decision on his future lied with QPR’s owners.
“I’d rather us have the challenge of building another Premier League team here which I would have done and we wouldn’t be in trouble,” Redknapp said.
“If I had started at the start of the year and we’d have been where we are I’d have gone ‘Yeah, I put the team together lads and I’m sorry I’ve put a bad team together and that’s where we are’.
|
{
"timestamp": "2019-04-21T00:45:29",
"url": "http://www.fiestafootball.org/2013/04/harry-redknapp-i-tried-my-best.html",
"language": "en",
"source": "c4"
}
|
What Is A Black And Tan, And Why Shouldn't You Order One In Ireland?
This term has a violent history.
The Black and Tan is a beer cocktail that is popular in America and Europe, and it has quite a history behind it. But before you decide to order one at an Irish pub, there are a few things you should know.
What Is A Black And Tan?
A Black and Tan is a combination of Guinness and Bass ale that is layered in a glass. You start out by pouring a layer of ale into the bottom half of the glass to create a sturdy head, and then you follow that with a layer of Guinness over an inverted spoon to make sure that the beer doesn't plunge all at once.
There is actually a special Black and Tan spoon that you can use. It is bent in the middle and makes the Guinness easier to pour, since the spoon balances on the edge of the pint glass.
The layering of Guinness on top is possible because of the drink's lower specific gravity, which makes it the lighter beer despite its stoutness. This keeps the two beers from mixing.
You can use other pale ales or lagers in a Black and Tan, but Bass is the traditional option.
Ordering a Black and Tan in Ireland is a huge no-no because the term is considered offensive in that part of the world. The name was first used in the American magazine Puck in 1881 as a reference to the drink's color. But the term has a completely different meaning for Irish citizens.
During the Irish independence movement of 1920 and 1921, the British Parliament created a special force to suppress the Irish Republican Army (IRA)'s guerrilla war. The Irish called the force's members the Blacks and Tans because of their mismatched khaki military trousers and dark police uniform shirts.
The army was comprised mostly of former World War I servicemen, but it wasn't simply a counterforce to the IRA. The Black and Tans used horrifying tactics, like burning down entire towns and slaughtering civilians. One of their most infamous acts was killing 12 civilians at a soccer match in Dublin. They also torched 20 homes in Balbriggan, a town in the northern part of Ireland, and the soldiers looted pubs and burned down a factory, killing two men in the process.
Sadly, about 20 percent of the force was made up of Irish citizens.
Because of this mistreatment, the term 'Black and Tan' is an insult in Ireland, and it would be culturally insensitive to use it there.
So, how should you order a Black and Tan when you are in an Irish pub? Simply ask for a Half and Half.
|
{
"timestamp": "2019-04-18T18:22:28",
"url": "https://www.oola.com/life-in-flavor/2461968/black-and-tan/",
"language": "en",
"source": "c4"
}
|
Kung Fu Panda's Jack Black will soon be bringing his comic style to another animal-centric movie. The funny man has been confirmed for a role in the remake of Jumanji. He will be joining comedic actors Kevin Hart and Dwayne Johnson for the Jake Kasdan-directed reboot.
The Rock made the announcement via his Instagram account on 11 May alongside the caption: "IT'S OFFICIAL: An ol' friend is ready to play in the world of #JUMANJI... JACK BLACK."
The muscled actor, who is currently working on the Baywatch film, mentioned that he is a big fan of Black and said his fellow actor would do justice to the role. However, Johnson didn't reveal which role the School of Rock star would be taking on. "Been a big fan of his work over the years. A brilliant actor who I'm confident will turn in a performance of a lifetime for JUMANJI. (when we reveal his character you'll understand;)," he added in his photo comment. "In our re-imagining of the story of JUMANJI, Jack brings that rare balance of cool with funny and edge with childlike joy."
It looks like the new script for the film, which is based on Chris Van Allsburg's children's book, demands even more humour. Johnson confirmed that his Central Intelligence co-star Hart will also be joining the cast. "The "Jumanji Breakfast Club" is coming together... myself, Jack Black and Kevin Hart," he mentioned.
Johnson, who is also co-producing the film with Allsburg and the late Robin Williams (who acted in the original Jumanji movie), posted an emotional message online in which he promised to honour William's name and character Alan Parrish.
The original movie had three major roles but the reboot will have five. Right now Johnson, Black and Hart will take on three of the characters while the hunt is still on for another actor and actress to join the cast.
The Jumanji remake is slotted for release on 28 July 2017.
|
{
"timestamp": "2019-04-20T16:35:29",
"url": "https://www.ibtimes.co.uk/jumanji-remake-jack-black-kevin-hart-join-dwayne-johnson-board-game-movie-reboot-1559628",
"language": "en",
"source": "c4"
}
|
This entry was posted on March 2, 2018 by raberry65. It was filed under Doll Photography and Blogging Presentation and was tagged with doll blog, Doll Photography, Fashion doll photography, Inside the fashion doll studio, ITFDS, Rebecca Berry Photography, The Art of Fashion Doll Photography and Blogging.
It took me a while too 😉 Just keep trying…you will be so happy when you only have to take out a string in post processing rather than a stand. 🙂 Thank you for watching!!
Thank you Alena! I am glad you are enjoying the videos. Yes!! Macro lenses are amazing for doll photography. Don’t forget to share your work!
|
{
"timestamp": "2019-04-22T10:23:35",
"url": "https://insidethefashiondollstudio.com/2018/03/02/doll-photography-and-blogging-equipment/",
"language": "en",
"source": "c4"
}
|
This statement was originally published on rsf.org on 3 April 2019.
Reporters Without Borders (RSF) calls on the authorities in the Indian Ocean archipelago of Comoros to stop censoring and intimidating journalists amid a continuing political crisis in the wake of the country's presidential election on 24 March.
In an unprecedented press boycott, Comorian journalists have announced that they will not cover the government's activities for the next two weeks because of "the many attacks on journalists and media outlets" whereas President Azali Assoumani's reelection is being challenged by the opposition candidates, who have formed a National Transition Council (CNT).
Masiwa Komor editor Toufé Maecha was detained arbitrarily for several hours when he went to the gendarmerie's headquarters in the capital, Moroni, on 30 March to seek information. The gendarmes accused him of spying for the opposition and sullying the country's institution. Maecha told RSF that the gendarmes forced him to undress while they interrogated him, and that they threatened to arrest him again if published anything about the way he had been treated while held.
Besides, five issues of three different newspapers have been censored by the authorities in the past week. The 28 March issue of La Gazette des Comores, whose front page headline said "Opposition 12 proclaim National Transition Council," was prevented from reaching the newsstands. On the evening of 31 March, the security forces intervened again to prevent La Gazette des Comores and two other dailies, Masiwa Komor and Al Fadjr, from being distributed. They were all carrying reports about Maecha's mistreatment.
Several newspaper editors were summoned to a meeting with the interior minister on 1 April. "He told us that he would continue this policy for as long as the newspapers continued to jeopardize national security by publishing lies," one of the editors told RSF.
"What with censoring, arresting and intimidating, the behaviour of the authorities towards journalists is both unacceptable and irresponsible," said Arnaud Froger, the head of RSF's Africa desk. "Violating the freedom to inform in a crisis is the best way to amplify the crisis. Journalists are neither responsible for the crisis nor its protagonists. They are just there to do their job to cover events, which is more necessary than ever. Every democratic state has a duty to ensure that they can work freely, not to target them and turn them into public enemies."
RSF has repeatedly tried reaching the interior minister and the National Press and Broadcasting Council for an explanation, but without success.
Comoros is ranked 49th out of 180 countries in RSF's 2018 World Press Freedom Index.
|
{
"timestamp": "2019-04-26T14:10:34",
"url": "https://ifex.org/comoros/2019/04/05/crisis-clampdown-journalists/",
"language": "en",
"source": "c4"
}
|
Some of our most beloved birds — Purple Martins, Chimney Swifts, Tree and Barn Swallows, E. Whip-poor-wills, and C. Nighthawks — are in trouble and we know only some of the reasons why. All of these, as well as other swallows, some flycatchers, and even bats are known as “aerial insectivores,” species that feed on their insect prey in flight. In Canada, populations of several formerly-common aerial insectivore species have fallen by more than 70% within the last two decades, leading some to be listed as Threatened. Similar declines are occurring in some U.S. states and regions, including Wisconsin.
On 6-8 September 2018 nearly 140 bird enthusiasts gathered at the Ingleside Hotel near Waukesha to learn about these species, recent research results, and what we can do to help. The event provided outstanding networking opportunities, served as a launching point for future collaborations, and offered the rare opportunity to witness over 2300 Chimney Swifts entering a single roost! Individual presentations are linked within the conference agenda below. Questions and comments relative to the event should directed to Bill Mueller (wmueller@wglbbo.org), Karen Etter Hale (wbcibird@gmail.com), or Ryan Brady (ryan.brady@wisconsin.gov).
This Wisconsin Bird Conservation Initiative and Bird City Wisconsin conference was sponsored by the Wisconsin Department of Natural Resources, Natural Resources Foundation of Wisconsin, American Bird Conservancy, Madison Audubon Society, Western Great Lakes Birds & Bat Observatory, and Wisconsin Society for Ornithology, with additional funding provided by the Wisconsin Metro Audubon Society, 1000 Friends of Wisconsin, and Jaeger-Mellerop Family Charitable Trust.
|
{
"timestamp": "2019-04-25T03:53:57",
"url": "http://www.wisconsinbirds.org/annual-meetings/2018-wbci-annual-meeting/",
"language": "en",
"source": "c4"
}
|
Orders should be placed online using the shopping cart. If you encounter any difficulties, please contact us and we’ll be glad to assist. You don’t have to create an account to use our site, however we welcome you to register if you’d like to do so. This gives you access to past and current orders, your wish list & order tracking.
If you do not want to give credit card information online, please create your order in the shopping cart and choose ‘Telephone Order’ as your method of payment at time of check out, submit your order via the website and then call (575) 770-2806 to speak to a person.
Currently, we process online orders through PayPal Advanced, which allows you to pay using any major credit card, without having a PayPal account. If you have a PayPal account, you may pay using a credit card, balance transfer or bank account transfer within the PayPal system. Orders paid via PayPal e-checks will be held until PayPal advises your funds have been received. This can take 4-6 business days or longer, depending on your bank. We reserve the right to cancel orders shipped to unverified PayPal accounts or those shipped to a third party. On Credit Card transactions, if the Bill To and Ship To are not the same, or do not match the information reported by your bank, or if the IP address logged on our system for your order does not match your billing or shipping location, at our discretion, we will request a Credit Card Authorization Form be submitted to us, along with a copy of the Bill To party’s Credit Card and Drivers License for those orders. We do this to protect you and us from fraudulent transactions. If this information is not provided, your order will be canceled from our system and payments made will be refunded.
We strive to pack and ship orders as quickly as possible, usually two business days. Since our toothpaste is handmade, sometimes we run out and have to make new stock, so that will take a few more days. We will attempt to keep our online inventory up to date so that it is clear whether an order will take longer than two days to complete.
International Orders — We currently only ship to the US and Canada.
We generally ship using USPS Priority mail, which takes an average of two to three days to arrive after we tend your box to the Post Office.
Claims for shipments lost in the US Mail system will not be initiated until 21 days after date of shipment to give the post office time to make delivery on packages that may be delayed in transit. We cannot process a claim for a shipment that is scanned as “Delivered” by the post office. Contact your post office and speak to your postal carrier as soon as you determine you haven’t received your shipment.
Replacements, Returns and Refunds If we made an error in shipment, please let us know within 7 days of receipt of goods and we will immediately replace those items that you did not receive. Similarly, please let us know within 7 days if an item arrives and is damaged and we will make sure it is replaced.
We cannot accept returns of any opened items, as these are considered to be personal items and are no longer salable. Items that are not opened and are in salable condition may be returned within 14 days with prior authorization. A 10% restocking fee will be charged. Original and return shipping charges are not refundable.
If your order is unclaimed or undeliverable to you and is returned to us by the carrier, original and return shipping charges and a 10% restocking fee will be deducted from your refund.
Email us for a return authorization number. We will not be responsible for items returned without authorization and items returned without authorization will be refused. We will not be responsible for returned items lost in transit. Authorization numbers should be posted on the outside of the package, near the return address. Please request return authorization numbers within 7 days of delivery and return it to us within 14 days. After that time the product will no longer be accepted and sale is considered final.
You should always do a safety patch test of any new skin-care product that you use. Should you experience an adverse reaction to any product, discontinue use immediately and flush the skin. Should the reaction persist for more than five days thereafter, please contact a physician. Please contact us to let us know the nature of your reaction. We provide an extensive list of all of our ingredients, so please check the listing if you know you are sensitive or allergic to any common cosmetic ingredients. Please contact us if you have any questions or concerns.
We make every effort to produce products using safe manufacturing practices. Due to customer demand and concern about ingredients, we have changed most of our preservative systems to more natural eco-certified preservation. The shelf lives of these products will remain approximately a year, provided they are kept at room temperature or less. You can lengthen the shelf life by storing products in cool conditions, above freezing. Because of the more natural preservation systems, products will be more susceptible to contamination after opening. You can reduce this likelihood by ensuring that the product only be touched with freshly washed hands or a clean spatula. All non-soap items bear a manufacturing code.
Discontinue the use of any suspect products and contact us immediately regarding your concerns.
|
{
"timestamp": "2019-04-26T13:01:55",
"url": "https://blackmagictoothpaste.com/terms-conditions/",
"language": "en",
"source": "c4"
}
|
Drywall Master Tools Catalog ... Trust Drywall Master Tools to deliver drywall taping tools that exceed the performance and reliability you demand. Experience unmatched customer service and support. We take great pride in building exceptional tools and offering them at an outstanding value.
gypsum board manufacturing machine,dry mortar mixing plant 40t/h gypsum board production equipment in dubai is widely used for mixing of powder, granular, flake block, irregular and sticky materia l s in the industries of feed, cereal, food, chemicals, medicine, pesticide, etc. is the professional manufacture of Dry-mortar equipment with design, manufacture, sales and service in a line.
Millions of tons of gypsum are mined each year in North America, and gypsum board is the principal product in which it is used. Besides the newly mined material, up to 20% of the gypsum used to manufacture drywall can be recycled from waste generated at the manufacturing plant or at construction sites.
Canada and the United States. Drywall panels in the United States are manufactured in 48-inch (1.2 m), 54-inch (1.4 m) and 96-inch (2.4 m) wide panels in varying lengths to suit the application, though 48-inch is by far the most common width.
Our great prices and excellent customer service make Wall Tools your one stop shop for taping tools, sanding tools, drywall finishing, texturing, stilts and beyond. Our drywall superstore ships worldwide from our central warehouse, and partner warehouses throughout the United States and Canada.
WELCOME Wallboard Brand drywall tools continue to be the most preferred brand of drywall tools in the business. Year after year, drywall professionals rank us #1 - as the brand they use most, and the most innovative company in the category.
PS800 Drywall Steel Stud Machine. This Jobsite PS800 Drywall machine forms studs that use approximately 20% less material than the standard studs. PS800-light gauge type Steel Stud Roll forming Machine makes the profile per the sketch to the left. This machine roll forms 3 5/8″ and 6″ Studs in a nonstructural type profile.
Above: Summary statistics for the USA and its gypsum and gypsum wallboard industry. Gypsum wallboard, as it is known today, is an efficient, easy-to-use, sustainable and safe product that perfectly suits the US construction market.
Made in USA Drywall Directory - Offering Wholesale USA Drywall from USA Drywall Manufacturers, Suppliers and Distributors at TradeKey.com Already A ... You may also be interested in more Drywall Manufacturers & Suppliers Drywall Screws Suppliers. Drywall Materials Suppliers. Drywall Ceiling Suppliers. Drywall Joint Tape Suppliers.
Al's Taping Tools & Spray Equipment is a family owned business founded in 1985. Bruce Gust was a drywall taper for 12 years before founding Al's Taping Tools back in 1985. He started out going job-site to job-site selling drywall tools out of the back of his car.
Guardrail / Safety Barrier Manufacturing Equipment; Metal Building and Roofing Manufacturing Equipment. Panel Rollforming Lines; Purlin Rollforming Lines; Trim Shop Equipment; ... Our standard drywall line will produce sections from 0.018" to 0.035" material and typical web widths up to 6" with a single flange height.
drywall manufacturing equipment usa - bnsdav. Source Top Quality Drywall Manufacturers Supplier, Drywall drywall manufacturers in usa, /ceiling/plaster board manufacturing equipment. Gypsum recycling Wikipedia Gypsum recycling is the process of turning gypsum waste that the equipment processing the waste is capable of to recycle drywall in the USA.
Drywall Mud - Graco Inc.
USA Gypsum is dedicated to providing our customers with a quality service at a price they can afford. When you use our gypsum drywall recycling services, you'll save on landfill and waste removal costs. USA Gypsum handles gypsum drywall disposal for less, helping businesses, manufacturers, and other industries enjoy economical sustainability.
Kraft Tool Company is a manufacturer and distributor of quality, professional tools made in the USA. Our tools are created for everyday use by the professional cement finisher, brick mason, asphalt paver, tile setter, plasterer or drywall craftsman.
Find Drywall manufacturers from China. Import quality Drywall supplied by experienced manufacturers at Global Sources.
National Gypsum has six plants producing interior finishing products under the ProForm® BRAND. The primary product is joint compound which you may hear called "ready mix" or "drywall mud". Cement board, marketed under the PermaBase® BRAND, is the company's third business line.
The largest inventory of drywall tools, drywall taping tools, taping tool parts, texture tools- all with great pricing and outstanding All-Wall customer service. Purchase drywall taping tools, automatic drywall tools, drywall texturing tools, taping tool parts, and drywall stilts on our expansive online site.
MAGNUM PRODUCTS is the leading manufacturer of Professional Drywall Products. Regardless of the application or the equipment...Magnum makes the perfect product at the best price.
Grabber also distributes a wide range of proprietary tools, accessories, equipment, and building materials to the construction industry. Hamilton Drywall Products Hamilton Drywall Products specializes in quality drywall finishing products. We manufacture compounds, textures, setting compounds, and drywall primers.
|
{
"timestamp": "2019-04-26T03:47:50",
"url": "https://www.tantetrijns.nl/19/02/05/45473-drywall-manufacturing-equipment-usa.html",
"language": "en",
"source": "c4"
}
|
Dimapur, February 16: An army recruitment rally will be held at Bhagat Stadium, Rangapahar Military Station (Nagaland) from April 3 to 6 for enrolment of youths from Nagaland only.
The online application has already started and will remain open till March 18. For registration online, one can login to www.joinindianarmy.nic.in. Candidates who have registered in the previous rally can login directly and check eligibility and apply fresh.
The vacancies are for Soldier GD (10th or 12th std), Soldier Technical (12th Std with Physics, Chemistry, Maths & English), Soldier NA (12th std with Physics, Chemistry, Biology & English), Sol Clerk/Store Keeper Technical (12th std with English & Maths/Book Keeping/Accounts as compulsory subject in 12th), Soldier Tradesmen (8th &10th std simple pass).
The CEE will be conducted at Rangapahar on April 28. For any other query one can contact 03862-248845 & 8974958673 from 8:30 am to 2 pm on working days for the entire duration. Last date of registration is March 18.
|
{
"timestamp": "2019-04-25T19:58:42",
"url": "https://nagalandpage.com/army-recruitment-rally-at-rangapahar/",
"language": "en",
"source": "c4"
}
|
Kilkenny Recreation and Sports Partnership run a number of aqua aerobics and swimming lessons for older adults. Aqua aerobics or water aerobics is a great combination of fun and exercise. The exercise involves various body movements in a rhythmic style. This kind of exercise is appropriate for all age groups.
Pilates is a form of exercise, which emphasizes the balanced development of the body through core strength, flexibility and awareness in order to support efficient, graceful movement. One of the best things about the Pilates method is that it works so well for a wide range of people. Athletes and dancers love it, as do seniors, women after pregnancy, and people who at various stages of physical rehabilitation. All exercises are developed with modifications that can make a workout safe and challenging for a person at any level.
Just because you are not too steady on your feet, let alone happy to run or jump, doesn’t mean that you can’t exercise and it doesn’t mean that you shouldn’t exercise.
In addition, if that’s not enough, simply spend an half an hour or so socialising with Margaret, KRSP’s tutor and the other participants.
On the night people are invited to participate in any of the three sports based on our traditional games; Lobbers, an adaption of Boules, Flisk, similar to Horseshoe Pitching and Skittles. The three sports that can be played in Singles, Pairs and Teams with plenty of opportunities to get to know your team mate and the opposition! The emphasis of the games is on participation and fun but the fun really starts when the competitiveness creeps in!
Over the last two years, the choice of activities has built up, with the group now regularly taking part in Short Mat Bowling, Chair Based Exercise and even Walking Football!!
If you would like to take part, contact Seamus at 087 3567884.
As always, KRSP would like to encourage people to try new activities and increase their daily physical activity levels. KRSP regularly host Older Adults Festival which gives people the opportunities to try out various activities. KRSP try to provide as many free activities as we can on the day. If you find something you like, we can help you arrange some for your group!
To date some of the activities sampled include Fit Walk, Aqua Aerobics, Dance and Bowling.
Both these leagues cater for Older Adult Groups and Disability Organisations. The Go For Life Games have been developed to encourage social competition and works towards a national final day in June. The Boccia League takes place at different times during the year with competition days in the Watershed. Both games provide opportunities to host games and travel to other local communities.
The Go for Life Games involve three sports that can be played in Singles, Pairs and Teams. The emphasis of the games is on participation and fun with the games played in a non-competitive way and participants umpiring their own games. The 3 games are Lobbers (adaption of Boules), Flisk (adaption of Frisbee and Horseshoe Pitching) and Scidil (adaption of Ten-Pin Bowling and Skittles). All Over 50’s are welcome to come along on the participation day and join in the games.
Walking Football, as the name implies, is a slower version of the beautiful game. It’s a non-contact form of exercise, currently played indoors and supervised by trained staff to ensure that it is safe and enjoyable. All you will need is correct footwear (good grip trainers or football boots) and comfortable clothing and make sue to stay around afterwards for a post-match cuppa! Contact William Kinsella, 083 8785326 if you wish to join.
PALs Workshops are very useful to anyone involved in or interested in organising and leading physical activity for older adults. They are designed to be a fun, practical experience. There is 8 workshops spread out over 8 weeks. Each workshop lasts for 5 hours and a small lunch is provided. Each workshop is a mix of theory and practical physical activity. Participants must attend all of the Workshops offered and be prepared to lead members of their own groups or communities. At the end of the series of PALs Workshops, Go for Life provides a printed certificate of attendance to each participant. Contact the KRSP office at 056 7794991 if you are interested in this training.
All registrations for KRSP led programs should be directly with KRSP with the the exception of the Older Adults Aqua Aerobics in the Ormonde Hotel which should be registered directly with the Ormonde Hotel.
|
{
"timestamp": "2019-04-23T01:02:13",
"url": "http://www.krsp.ie/older-adults/",
"language": "en",
"source": "c4"
}
|
The name Geesin comes from the village of Gissing in Norfolk, England. This village name doesn't look very 'English' and probably came in by way of the early Viking invaders. In the 13th Century, it was written Gyssyngge and variants. Any person moving out of that village to settle somewhere else was 'de Gyssyngge'. Our branch moved west into Cambridgeshire and by the 15th Century, there were several families in the south of Leicestershire. By this time, the name had been modified to Geesinge, probably through dialect: even now in Leicestershire, Geesin is pronounced 'Geeezn'.
This was a time of 'ecclesiastical unrest' with Oliver Cromwell rampaging about, and it is known that many country folk simply did not register birth,marriage or death events. Those of the family name who did register events but who could not write or who spoke their name to a scribe often got Geeson written down: this surname is much more common in England. Our branch were yeoman farmers who had enough property to warrant their leaving wills, thereby providing some illuminating detail to the history. Round about 1750, William's great-grandson, also William, and Churchwarden of Muston in the Vale of Belvoir, Leicestershire, made up and signed the church accounts books. He dropped the 'g' off the end of his name and signed 'Geesin'. A hundred years later, our branch of the family was still in Muston, pronounced "Muzz'n". Yet another William, great(x3)-grandson of the first, married a Dorset innkeeper's daughter Tryphena Kennedy. They travelled North to Gateshead, situated on the south bank of the river Tyne, and set up a lodging house. Just before this, in 1851, William's two youngest brothers, Charles and Frederick, set off for America, carrying the good Geesin name with them. Charles joined the Ohio National Guard but soon died of a fever and Frederick went on to establish the American branch of Geesin.
My father Kenneth Frederick was born 3 generations later, interestingly back in Leicestershire, but that was because his engineer father never had the same address for any two consecutive events, in some ways a victim of the 20th Century's wars and industrial flux. My father was soon whisked away from England and grew up in Paisley, near Glasgow, Scotland – and that's how I came to be born in Scotland. He had become a constructional engineer and wanted me to follow the pattern, but I rebelled. At age 17½, I joined the Original Downtown Syncopators and whizzed back down to England, little knowing that I should most probably have been there in the first place. In fact, I started my professional career in Crawley carpark, Sussex, because that's where the band coach was parked.
So it was in Crawley that I met my wife: as it says on the original sleeve of 'A Raise Of Eyebrows' "married Frances Helene Reid on 27/8/66 and a good idea!" Well, it still is: we produced 3 boys, Joe, Dan and Fraser, who are all producing stuff in turn.
|
{
"timestamp": "2019-04-25T02:20:57",
"url": "https://rongeesin.com/all-the-life/9-family",
"language": "en",
"source": "c4"
}
|
Sincerely look for Wire Harness Sleeve , wire harness sleeve , Wire Harness Cable , all of our products have been strictly inspected before shipment.
"Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Wire Harness Sleeve , wire harness sleeve , Wire Harness Cable , please feel free to send us your enquiry. We sincerely hope to establish win-win business relationships with you.
|
{
"timestamp": "2019-04-25T14:51:25",
"url": "https://www.etopwireharness.com/dp-wire-harness-sleeve.html",
"language": "en",
"source": "c4"
}
|
To access our secure content, please login using your registered username and password.
If you do not have a username or password, please click below to register. Once we have confirmed your identity we will enable your account.
|
{
"timestamp": "2019-04-20T16:28:03",
"url": "https://www.sdbemat.org/account/login?redir=/",
"language": "en",
"source": "c4"
}
|
Chasie Haupt, a physician assistant specializing in dermatologic surgery and Mohs surgery closures, is now seeing patients in the Venice, North Port Commons and Sarasota offices of Riverchase Dermatology and Cosmetic Surgery. In her role, Chasie performs the reconstruction of Mohs defects and excises skin cancer. Chasie administers precise post-procedural sutures to ensure a beautiful and cosmetically pleasing result.
Chasie received her Bachelor’s of Science Degree in Physician Assistant Studies from Gannon University, in Erie, Pennsylvania. Prior to joining West Coast Dermatology, Chasie spent ten years as a surgical supervisor of the Sarasota region for United Surgical Assistants. Chasie holds certification with the National Commission on Certification of Physician Assistants with special recognition in surgery. She brings many years of surgical experience to our team. She is also an active member of the American Academy of Physician Assistants.
Chasie is from Pittsburgh, Pennsylvania and is an avid Pittsburgh sports fan. In her free time, she enjoys traveling, boating and spending time with her husband and twin baby girls.
|
{
"timestamp": "2019-04-21T12:31:23",
"url": "https://www.riverchasedermatology.com/providers/chasie-haupt-pa-c/",
"language": "en",
"source": "c4"
}
|
South Africa. The safari felt like something out of Jurassic Park.
Flint, a tarp and water (did I mention I teach Outdoor Ed.?).
|
{
"timestamp": "2019-04-21T02:35:14",
"url": "https://www.tcs.on.ca/node/12721",
"language": "en",
"source": "c4"
}
|
The RemotePoint Wireless Presentation Suite pairs SMK-Link's new Rechargeable Media Keyboard with RemotePoint Jade—a top-of-the-line, professional Presentation Remote Control with green laser pointer. With its 100-foot wireless range, the Presentation Suite is a great choice for computer, multimedia and presentation control in boardrooms, company meeting rooms, lecture halls, churches and public speaking venues. Both Media Keyboard and Presentation Remote share a common USB receiver dongle. This product replaces SMK-Link model VP6341.
|
{
"timestamp": "2019-04-20T14:25:39",
"url": "https://www.smklink.com/collections/keyboards-mice/products/remotepoint-wireless-presentation-suite",
"language": "en",
"source": "c4"
}
|
George Mason University Director of Athletics Brad Edwards announced today that men’s basketball coach Paul Hewitt will not return to coach the 2015-16 season.
Current issues and court cases involving the NCAA will be discussed during a symposium from noon to 1:45 p.m. on Oct. 15, in Halpin-Harrison Hall, Stimpson Auditorium on the campus of Shenandoah University.
George Mason head men’s basketball coach Paul Hewitt has announced the addition of Eric Skeeters as assistant coach. Skeeters joins the Patriots following four seasons at the University of South Florida.
|
{
"timestamp": "2019-04-21T02:14:30",
"url": "https://augustafreepress.com/tag/paul-hewitt/",
"language": "en",
"source": "c4"
}
|
It looks like Verizon is at it again. First, it was (and still is) the carrier’s treatment of the Samsung Galaxy Nexus and now, it appears that it’s going to be giving another Samsung device, the Galaxy S III, and its future owners the same kind of terrible treatment.
To bring those of you out of the loop up to speed, Verizon has completely dropped the ball with the Samsung Galaxy Nexus. Since December, when the phone launched, the carrier has released a grand total of zero updates for the phone. Zero. For a Nexus device. The phone is still on Android 4.0.3 Ice Cream Sandwich while other, lesser devices, are on Android 4.0.4.
Needless to say, Galaxy Nexus owners like myself are frustrated and angered by the situation. And many, like myself, feel let down by the phone and the carrier that it calls home.
Read: Verizon Dropped the Ball with the Galaxy Nexus.
It looks like Verizon is trying to outdo itself with the Samsung Galaxy S III though, a device that it has yet to even announce.
Earlier today, it became apparent that the carrier will be ending its double data 4G LTE plans on June 3rd. The carrier hasn’t confirmed it but multiple sources are saying that that will be the day that the carrier ends the promotion.
Interesting, because the Samsung Galaxy S III is arriving in the United States during the month of June. So if Verizon gets the Samsung Galaxy S III, which I believe it will, and if Verizon decides to end the promotion on June 3rd, which appears likely, then that means that the carrier has to launch the device on one of three days in order for future Galaxy S III owners to take advantage of the deal.
If it launches it after June 3rd, and my guess is that it will, it appears that Galaxy S III owners will be stuck with the carrier’s regular old tiered 4G LTE data plans.
In the Land of Sarcasm, that’s called a nice gesture.
I realize that it’s a promotion and that Verizon never said when it was going to end it, but guess what? It’s been going on since February. February. Three full months this promotion has been up and Big Red is deciding that it’s time to end it at the beginning of June?
Poor timing, poor decision, if true.
These data plans could be a huge sell for Verizon, especially if the other three major U.S. carriers in AT&T, Sprint and T-Mobile get the device as expected. After the Galaxy Nexus debacle, Verizon needs something to lure customers in, and double data plans seem like something that could do that.
However, Verizon seems determined to undermine as many launches as it can, (see Droid Incredible 4G LTE, Droid Bionic, Droid 2, Galaxy Nexus, HTC ThunderBolt for further information) so don’t be shocked to see the Galaxy S III launch without access to one of the best things that Verizon has to offer consumers.
Read: Why Did I Buy the Galaxy Nexus Again?
Would you buy a Samsung Galaxy S III on Verizon if it didn’t have a double data plan available?
I called up support and got promised that the firmware update will be out this month. I bet those who have had it longer than I were promised it every month this year.
I’m running CM9 on mine so I might have misunderstood, but I thought 4.0.4 started pushing out last week to the Verizon Galaxy Nexus?
An update made it out to a select few devices. HOWEVER, not even 24 hours later Google pulled the update from the server the OTA was using. Makes me thing the 4.0.4 (build: IMM76K) was a soak test.
I DID try it for a little while on my phone and it didn’t fix everything. Still had issues with 4G losing connectivity.
I thought I’d read somewhere that the LTE version of Galaxy S III was going to be ready in time for summer and that the Verizon (i.e. LTE version) wouldn’t be ready until 3Q or 4Q?
But this doesn’t concern grandfathered unlimited people correct? But that June 3rd date sounds exiting if the author’s assumption of Verizon’s evil ways holds true.
I agree. I’m one of the loyal(I laugh when I call myself that) customers that will get grandfathered in. I currently have a Droid X, and am more than ready for my update. I just don’t know what phone to get. Can any of you Android geniuses recommend a phone to me. BTW, I recently used my upgrade on an Iphone. I kept it for SIX days, ughhhh. Seriously, I don’t understand what the big commotion is about that phone. I just assumed, I could create icons(widgets)for speed dialing, which I thought was something basic on my Droid X. Guess I’m not an Iphone person. Any help would be greatly appreciated. I’m not sure if I should wait until the Galaxy 3, or just get a cheaper price on some of the older models like the Spectrum, Bionic or even that little LG Lucid phone.
|
{
"timestamp": "2019-04-20T22:30:07",
"url": "https://www.gottabemobile.com/has-verizon-already-screwed-galaxy-s-iii-owners/",
"language": "en",
"source": "c4"
}
|
This is the reference document for the REST API and resources provided by Medianova CDN. The Medianova Customer API is based on open standards, you can use any web development language to access the API.
In order to access api resources you must create your api User key and api secret by visiting your profile url: https://panel.medianova.com/user_profile and follow the below steps.
Please click to Generate Token button to get key and secret.
You may use below User key and User secret to access api resources.
You may obtain your user_key and user_secret details from https://panel.medianova.com.
|
{
"timestamp": "2019-04-18T20:58:03",
"url": "https://docs.medianova.com/api_getting-started/",
"language": "en",
"source": "c4"
}
|
Ghostwriting a book or article: You supply the ideas and raw material, and I create the piece for you, with your name on the finished product.
Blogs: Why spend hours a week on this when you can outsource your blogs and spend your time on other things?
Resumes: As a certified professional resume writer (and career coach), with twenty years of HR and recruiting, I can help you pull out the best of your skills and experience to showcase your value to your target employer.
Marketing Copy: Whether its a website, white paper, email, or business letter, outsourcing the copy ensures it is crisp, professional, and compelling.
Personal Milestones: You might not think of professional writers when it comes to wedding vows, dedications, obituaries or other important milestones, but why not consider it? I can help you express your feelings when it matters the most, and you can focus on making memories.
Corporate Communications: Company newsletters, memos, executive bios, handbooks, policies…these are often left in the hands of already overworked people who may not necessarily have a gift for wordsmithing. You’re not creating these so that no one reads them, so why not engage a professional to make them compelling, engaging and in the case of the policies and handbooks, legally compliant. This is one of the easiest things to outsource and once you do you won’t want to take it back!
Contact Carrie today to get started on your writing project!
|
{
"timestamp": "2019-04-24T08:11:49",
"url": "https://carriemaldonadowriter.com/professional-writing-services/",
"language": "en",
"source": "c4"
}
|
This afternoon finds me on my back deck with the temperatures in the low 80s. The children are occupied, the neighbor’s sprinkler and birds mask the barking dog, and the butterflies and dragonflies occasionally flit by to see what I’m up to. It’s easy to be thankful today for life as a stay-at-home mom.
Add a slice of lemon. What a simple and beautiful idea!
What a nice, simple idea. Thanks for sharing this book.
|
{
"timestamp": "2019-04-19T15:07:56",
"url": "https://teapartygirl.com/add-to-your-tea-party-library-this-summer/",
"language": "en",
"source": "c4"
}
|
Popularity - 602 views, 0.6 views per day, 1,018 days on eBay. Super high amount of views. 50 sold, 442 available.
602 views, 0.6 views per day, 1,018 days on eBay. Super high amount of views. 50 sold, 442 available.
Seller - 4,223+ items sold. 0% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.
4,223+ items sold. 0% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.
|
{
"timestamp": "2019-04-18T13:04:10",
"url": "https://picclick.com.au/Foe-5-8-Fold-Over-Elastic-By-The-Metre-282090203784.html",
"language": "en",
"source": "c4"
}
|
As mentioned in the Overview section, Transports are OptiPaaS file exchange work flow processes.
View this short video for a overview of Transports.
Organizations subscribe to Transports to be included in a process.
The End points that each Organization self-manages are the sources and targets that are orchestrated into each Transport.
|
{
"timestamp": "2019-04-20T04:23:21",
"url": "https://www.thruinc.com/user-guides/optipaas-users-guide/1/en/topic/transports",
"language": "en",
"source": "c4"
}
|
For use on 1964 - 1972 Chevrolet Chevelle / Malibu. New rear inner rocker panel drain plug rubber flap covers for your classic. Super easy to install, just push and snap into place.
Sold by the pair, does one car.
For use on 1964 - 1972 Chevrolet Chevelle / Malibu. New rear inner rocker panel drain plug rubber flap covers for your classic. Super easy to install, just push and snap into place. Sold by the pair, does one car.
|
{
"timestamp": "2019-04-21T18:56:44",
"url": "http://fbodywarehouse.com/store/1964-1972-chevelle-malibu-rear-inner-rocker-panel-drain-plugs-new-fbodywarehouse.html",
"language": "en",
"source": "c4"
}
|
Marriage and family are a key to a society’s structure. So, I asked myself this weekend “What does the Bible say about marriage?” As I combed through the concordance, there is many references to marriage, husbands and wives. I have selected a few to share with you.
Marriage is a covenant between a husband and a wife.
This particular verse has meaning to me in that I wanted to marry a man with the same faith values as me, because I knew there could be disagreements about such things as going to church, reading the Bible, prayer, etc.; especially when it came to raising our children.
Faithfulness to one another is key.
I understand this verse can be countercultural if you watch various films and television programs where partners live together before marriage, spouses cheat on one another, etc. However, I believe God is protecting the sanctity of marriages as it is a holy union between husband and wife.
As wives, we can either be a blessing or a curse to our husbands.
I look back on a time when a friend shamed my husband in front of me and the kids. I remember how awful he felt. Unfortunately, we had to end that unhealthy friendship, because we understand the importance of wholesome relationships.
It’s important to respect one another and our marital positions.
I know this verse is not very popular in our American culture today; especially with the feminist movement. However, God is a God of order and He is above all and places the husband as head of the household.
In addition to the huge responsibility of being head of his family, a husband is given the duty to love his wife sacraficially.
Frankly, I appreciate this covering from my husband. Now, is it always easy to submit, “No.” I grew up very independent, career driven and didn’t marry until 35 years of age. So, I am learning what that looks like. As a result, I believe God has blessed our marriage of 17 years.
These verses are just a few I discovered on marriage. There are many more in the Bible. I encourage you to seek for yourself.
What principles is your marriage built on? I would love to hear about them.
This week, Randy and I will celebrate 17 years of marriage and I’d like to share a story with you. I hope you enjoy it.
I nervously paced back and forth in the church auxiliary room while our family and friends awaited my grand entrance. I reflected on the day’s events. It began early with a delicious mocha and bagel as I drove sixty miles to my hairdressers. Two hours later, she handed me a mirror.
On my way to the church, I called my future mother-in-law, Dianna, to let her know I would be there soon. Upon my arrival, my future sister-in-laws whisked me into the preparation room to help me with my dress and final touch-ups.
They excused themselves and I was alone for the first time all day. I heard our guests arriving and groomsmen seating them. I gazed into the mirror one last time and thought to myself. After being the bridesmaid for the umpteenth time, I’m finally a bride at thirty-five-years-old.
I grinned while I reflected on our initial meeting two-and-a-half-years earlier. Dianna and my manicurist talked about us for one month and then exchanged our phone numbers. Randy and I met for coffee the following Friday and found we had a lot in common. After a lengthy discussion, we grew hungry and continued our conversation across the street at a Chinese restaurant. Three hours later, the owner leaned against the wall with folded his arms. “Sorry, folks we closed 30 minutes ago.” We chuckled as we excused ourselves.
My reflection was interrupted when my favorite song started playing on the church sound system. Our friend, Gervy, put together a video collection of our childhood and dating photographs. I was pleasantly surprised to hear it in stereo, because originally he was authorized to use his projector with tiny speakers. Sniffles and sighs of “Ahhhh” soon followed as folks reminisced. Goose bumps traveled up and down my spine as I anticipated my long-awaited walk.
I met my father in the hall leading up to the altar.
Our friend, Shannon, sang “This is the Day that The Lord has Made” while her husband, Blaine, accompanied her on guitar.
As we strolled down the aisle, everyone stood up and cameras flashed. I looked at my beaming groom. We both had waited a long time to find the person we would spend the rest of our lives with. Next to him stood his groomsmen; his brothers Mike, Ryan and my brother Greg.
When I reached him, our Pastor asked my dad the proverbial question.
“We do,” he proudly said. He gently transferred my right hand into my future husband’s hand.
I stepped forward, but struggled. I quickly looked behind me and noticed my father standing on the lace train of my dress. Stunned, he forgot to sit down after giving me away. Next to me stood my bridesmaids and my long time friends Joyce, Gillynn and Carina.
Our ceremony was traditional with scriptural readings, the lighting of unity candles, Holy Communion, and marital vows. Unbeknownst to us, during our wedding band exchange, Pastor Jim read love letters we wrote to each other. Tears now filled my eyes and Randy gently wiped them away with his thumb.
The crowd erupted in applause as we kissed and we passed by them.
Seventeen years later, we are still going strong and living in the majestic Santa Cruz Mountains with our fifteen-year-old son and thirteen-year-old daughter. As a tradition, on our anniversary, we watch our wedding video and are reminded of our commitment to each other.
Do you have a special story to share with us, please do?
When I was approached by Gary Chapman’s publicist about reviewing Loving Your Spouse When You Feel Like Walking Away, I was excited. I enjoyed reading his book The 5 Love Languages. Also, I had the honor to contribute a story in his book Love is a Verb.
Dr. Chapman is the Director of Marriage and Family Life Consultants and shares his advice based on his 35+ years of experience counseling couples.
One simple tool I took away from reading his new book is looking at how my own thoughts, feelings, and actions impact my husband.
I highly recommend reading Loving Your Spouse When You Feel Like Walking Away.
Gary Chapman-author, speaker and counselor-has a passion for helping people form lasting relationships. He travels the world presenting seminars, and his radio program airs on more than 400 stations.
Disclosure: No compensation was received for this book review. Just passing along a good read.
Have you found a goood book about enjoying a healthy marriage?
Fidelity – Faithfulness to a person, cause or belief, demonstrated by continuing loyalty and support.
My husband Randy and I met when we were 32 and married at 35. By that time, we both had experienced dating nuisances. It is so satisfying to be in a faithful relationship. I know I can trust him when he is attending a conference out of town, and he can stand confident when I am out running errands knowing that’s where I am.
Before I met Randy, I dated in the hopes of getting married and starting a family. During that time, I encountered disappointments and heartbreak from shenanigans such as games, infidelity, drug addictions, prejudism, stalking and even incarceration.
When I met Randy, it was refreshing to meet a guy that what you see is what you get. There is no pretense in our relationship and we share open/honest communication.
In June, we will celebrate 17 years of marriage, and we still share the same trust as we did since we said, “I do.” The insignia on the inside of my engagement ring which reads, “My Best Friend” is a daily reminder.
My hope is that my children will recognize the importance of commitment and will experience it for themselves some day with their spouse.
Here is one Bible verse that was read at our wedding ceremony I’d like to share with you.
What have been your experiences in dating and/or marriage?
Do you ever struggle balancing working with motherhood? I think a lot of moms find it difficult to balance career and parenting.
Fast forward a few years, my focus became my marriage and family life. Now, I enjoy watching my kids grow. My new challenge is balancing work, taking care of our household, and helping with homework.
One way that helps me balance my day is starting out with some quiet time with the Lord, praying and reading God’s word. Carving this time out of my busy schedule always helps me keep focused and makes my day go smooth.
Can you relate? If so, what tips have you found successful?
In a world where everything goes, it’s challenging to teach your children God’s design for marriage. This week, I am preparing for the “big talk” with my adolescent daughter. Fortunately, my husband and I found a great teaching tool called Passport to Purity created by Focus on the Family. They’ve created a helpful information to have a sober, yet, fun discussion with your children about the facts of life. It helped navigate my husband with our son a couple years back. I highly recommend it for frank discussions with your children.
What ways have you found successful to share sensitive material with your family?
Another big trial in the marriage relationship has to do with bread-winning. If you both have careers, the challenge will be the perception of whose job is more important. If just one of you has a job, the one who stays at home will need to find some other means of fulfillment. Jobs sometimes require relocation, which can put stress on the relationship and disrupt children’s lives. Every career decision must be approached with care and consideration, including taking into account the wants and needs of every family member.
I’ve found this true in our marriage, because early on we decided to have one parent stay home with our two children. Randy was a commercial plumber and I was a manager in Silicon Valley. We made the difficult decision he would be our stay-at-home dad. At the time, it was non-traditional. He stayed home with our son and daughter for thirteen years. Just last year, he returned to the work force. He is a landscaper for a Christian Conference Center and loves his new role. After I left the manufacturing industry a few years ago, I taught for a private preschool until free public transitional kindergarten was implemented. About five weeks ago, I started working in the Facilities Department of a Christian Conference Center and I too love my new role.
Although career choices can be a challenge in a marriage, I believe it can also be rewarding if you both agree with the changes. Fortunately, for us we are excited for each other’s new season in life. My hope and prayer is peace as you make a difficult decision regarding your career shift.
Are you changing your vocation? If so, please share with us.
As Spring time approaches, I am reminded of wedding season and wanted to share my engagement story with you.
My then boyfriend Randy’s mom threw us a dual birthday BBQ for our family and friends at our local historic Felton Covered Bridge Park. When we arrived, I found a comfy bench to enjoy my breakfast before preparing for our guests arrived.
“Hon, I really need your help moving these picnic tables,” Randy said.
“I’ll be there in a moment. I’m finishing my bagel and coffee,” I replied.
“Randy, I’m starving and will be with you in a moment.” Hmmm, that’s strange. He’s usually not so demanding.
Our festive picnic table and colorful balloons looked great. As we put the finishing touch on the volleyball net, our guests arrived one-by-one.
After two hours of fun and games, Randy grilled marinated skirt steaks which complimented everyone’s contribution. The smell of roasting meat on mesquite chips is etched in my memory. During our mouth-watering meal, our family and friends started roasting us saying things like.
“I remember the first time Becky pulled up to our house on her new Ninja motorcycle. I thought to myself, My daughter is an official biker, my dad chuckled.
We embraced and everyone cheered.
Later that day, I discovered only my parents knew of his proposal plans. No one else; not even Randy’s mom or my brother.
He replied, “Randy asked me for your hand in marriage recently. I told him. If she’ll have ya, you have my blessing.” He winked.
Fifteen years later, we are still going strong and living in the majestic Santa Cruz Mountains with our fourteen-year-old son and twelve-year-old daughter who keep us on our toes.
Do you have a special engagement story you’d like to share with us? Please do!
Recently, I was reading Change Agent by Os Hillman where he cites divorce statistics. Sadly, approximately 45-50% of first marriages, 60-67% of second marriages, and 70-73% third marriages fail. That’s a lot of heartbreak!
Then, I thought, What does the Bible say about marriage? I discovered a lot, but wanted to share two ideas I believe could help many marriages be healthier.
Wives, be subject to your own husbands, as to the Lord.
Wives submit to their husbands. In today’s culture, submit is a taboo word. Due most in part by people who have abused their God given authority. However, the definition of submit is simply to accept or yield to the authority or will of another person; namely your spouse. I’ll be the first to admit it’s not easy as I am a very strong and independent woman. However, I find when I do, there is less strife in our marriage.
2. Husbands love your wives. Again, it today’s culture, men are taught to be strong, self-sufficient and stuff your emotions. Yet, one definition of love is a person or thing that one loves; beloved, dearest. Perhaps marriages would be happier if husbands (and wives) loved their spouses unconditionally. To further define characteristics of love, here’s what the Bible lists.
Love is patient and kind; love does not envy or boast; it is not arrogant or rude.
Wow, imagine if all marriages were filled with this selfless love! Maybe, just maybe, the divorce rate would diminish significantly or be eliminated entirely.
Do you have any marriage insight you’d like to share with us? If so, I’d love to hear it!
This week, I researched the top issues facing marriage and family today. As I suspected, communication landed in both arenas. Then, I got to thinking, What does the Bible say about communication?
I discovered several basic truths about communication and I will share with you two.
When I read this long ago, I took it to heart and do my best to stick to it. In addition, when I do say “Yes” to a committment, I do my best to fulfill it. People may not like it when I say “No,” however, they will appreciate my follow through when I do agree.
I think back to a time when I worked in the semiconductor industry. I remember a director who reported into the same vice president I did. It was my first experience with a “Yes man.” Our VP would ask him can it be done and his proverbial answer was “Yes.” However, each week when we presented our metrics, the lofty goals were often not met. I used to get so frustrated and decided I would not follow suit. If I knew my team could complete the assignment, I would sign up for the task. If we could not, I simply would say we cannot do “X,” but we can do “Y.” As a result, my superiors respected my results and appreciated our contribution.
If you find yourself overcommitted, I urge you to take a look at what your to do list is and ask yourself do I really need to do all of this? If the answer is “No,” then reprioritize and communicate your intentions to others. Like me, you may experience less stress and increased satisfaction for a job well done.
Do not lie is found in the 10 Commandments that were handed down to the Israelites by their leader Moses. He met with God on the top of Mt. Sinai and was given laws to live by which were incorporated into Judaism and Christianity.
I strive to tell the truth; even though sometimes it hurts or is humbling. Admittedly, it is not always the easiest course of action. It is sometimes easier to tell a little white lie. However, it’s been my experience that if I lie, I often have to cover it up with more lies. It’s exhausting trying to remember what I told different people. So for this gal, honesty is the best policy, and I think people appreciate it.
If you find yourself caught in a web of lies, I would encourage you to untangle it by simply telling the truth. Like me, you may experience freedom in your communication and relations.
These are just two of the many biblical ways to communicate with your circle of influence. Best wishes with your marriage and family.
I’d love to hear what communication techniques you’ve found successful. Please feel free to share with us!
|
{
"timestamp": "2019-04-23T06:39:16",
"url": "https://rebeccakrusee.com/tag/marriage/",
"language": "en",
"source": "c4"
}
|
All church organizations are religious, political institutions that create factions and wage wars against each other. Church organizations are not of the kingdom of God, they serve themselves and they are in opposition to the kingdom of God. They fight among each other for membership. They each preach their own version of the truth from the same Bible but they do not preach the TRUTH of Jesus Christ because Jesus said:"Follow Me." He never said we should start a church organization.
We have to deny ourselves, pick up our cross and follow Jesus Christ. His flock is small. His flock is scattered all over the world His flock go after Him, they do not flock together. They are led by the Holy Spirit and they do the will of God. They do not seek the approval or the company or the fellowship of other people They seek the fellowship and the approval of God.
You cannot belong to a church and belong to Jesus Christ. If you belong to Jesus Christ you ARE the church, the body of Christ, wherever you are in this world and you are not divided against other followers of Jesus Christ. All disciples are ONE in Christ. There are no factions, no divisions among those who follow Jesus Christ because they are of the same Spirit.
Those who belong to churches are divided against each other against God, Those who belong to churches do not belong to Jesus Christ. They are in opposition to Christ. Get out of church. Deny yourself, pick up your cross start following Jesus Christ. If you don't know Him get to know Him and follow Him. Church will not take you to Jesus, church will take you to hell! Get on your knees and seek Jesus and He will give you His Holy Spirit who will guide you every step of the way. All you need is Jesus Christ. He alone is the WAY, the TRUTH and the LIFE.
Follow Jesus Christ. No church, no man, no political organization.You cannot belong to the world and to Jesus Christ.
|
{
"timestamp": "2019-04-22T21:06:31",
"url": "http://www.finalcall07.com/2015/04/churches-are-political-institutions.html",
"language": "en",
"source": "c4"
}
|
Ticketgateway event creation process is very simple. You can easily create your own event for free in short span of time. Just follow the simple steps and get your event live for everyone. Just login to your account Simply choose "Create an Event" to start setting up your events.
How To Create An Event ?
Ticketgateway is the best place for event organizers to sell tickets online. From classes to concerts, we help people all over the world create customized pages and utilize our software to sell tickets and promote their events.
How To Add Features in Events ?
Ticketgateway events features help you save time and sell out your tickets. It will boost your online sales and increase engagement with customers.
How to Create Widgets ?
Select event which you want to promote.
Go to widget located in right sidebar.
|
{
"timestamp": "2019-04-22T06:14:48",
"url": "https://www.ticketgateway.com/blog/all-you-need-to-know-about-create-events-on-ticketgateway",
"language": "en",
"source": "c4"
}
|
You can easily rely on Mini Air Conditioner Guys to provide the most impressive expert services for Mini Air Conditioners in Wendover, UT. Our workforce of qualified experts will supply the expert services you need with the most innovative technology in the industry. We make certain that you receive the highest quality solutions, the ultimate price, and the finest materials. Call us by dialing 888-269-5556 to begin.
You have a price range to adhere to, and you should get lower prices. But, lowering costs shouldn't indicate that you eliminate superior quality on Mini Air Conditioners in Wendover, UT. We offer the finest quality while still helping you save money. We utilize the very best materials and techniques to be certain that your venture is going to withstand the years, and save some costs in ways that don't change the high quality of any work. This is achievable given that we know how to save time and funds on supplies and labor. Choose Mini Air Conditioner Guys if you want the highest quality support at a minimal price. Call up 888-269-5556 to talk with our customer care staff, today.
When you're thinking of Mini Air Conditioners in Wendover, UT, you'll need to be knowledgeable to come up with the best choices. You should not enter into it without knowing it properly, and you will need to understand what to expect. We will take the surprises out from the picture by supplying reliable and detailed info. You can start by discussing your job with our client service associates when you call 888-269-5556. We are going to talk about your concerns once you contact us and help you get arranged with a scheduled visit. We always arrive at the appointed hour, ready to work closely with you.
When you're arranging a task regarding Mini Air Conditioners in Wendover, UT, you will find reasons to choose Mini Air Conditioner Guys. We offer the highest customer support ratings, the best equipment, and the most effective and successful cash saving techniques. We offer the expertise you will want to satisfy your ambitions. Contact 888-269-5556 if you need Mini Air Conditioners in Wendover, and we will work with you to successfully carry out your job.
|
{
"timestamp": "2019-04-21T01:00:57",
"url": "http://www.miniairconditionerguys.com/ut/mini-air-conditioner-in-wendover/",
"language": "en",
"source": "c4"
}
|
Former Barcelona president, Joan Laporta, has claimed Antoine Griezmann would no longer be welcomed at the club, because he "played games" on the transfer front.
"They will decide what they think is best, but I think that most of the fans don't want him.
"This is mostly because of the price being quoted, I think it's inflated, there are other players with great potential who can play Griezmann's position.
"People have to want to come to Barcelona, he's a great player but he had the opportunity last year and didn't take advantage of it, he played games with Barcelona," Laporta said at the World Soccer Congress.
|
{
"timestamp": "2019-04-21T06:59:47",
"url": "https://afribaze.com.ng/forum/Entertainment/Sports/68453-ex-barcelona-president-reveal-why-barcelona",
"language": "en",
"source": "c4"
}
|
The Martinet Footbridge plays an important role in the soft mobility infrastructure in Lausanne, Switzerland. Engineered by Emch+Berger SA Lausanne, it is the first footbridge in Switzerland that is made of ultra-high-performance fibre reinforced cement-based composite material (UHPFRC).
The UHPFRC material was chosen to discretely and effectively integrate the 15.3 m long bridge into the existing urban buildings and to create an original and eye-pleasing experience. It also showcases the design and construction of a slender UHPFRC structure.
The asymmetric U-shaped cross-section consists of 2 main girders, an “organic” one and one with a full web. Both girders form a half-frame with the bottom plate stiffened with ribs in the transverse direction. In the longitudinal direction, the structure consists of 9 precast segments connected by straight post-tensioned cables. The bridge rests on two reinforced-concrete abutment walls.
Two models were created in SCIA Engineer: a strut and tie model and a model with beam elements and plates for the organic girder. Numerous SCIA Engineer functionalities were successfully applied: import DXF, 2D and 3D frames, graphical sections and dynamic analysis. The analysis helped achieve the main project goals. Moreover, the results obtained from SCIA Engineer model corresponded with the frequencies measured on site.
The Martinet footbridge project was a nominee in the “Civil Structures” category of the SCIA User Contest 2017 “The Art of Structural Design”.
|
{
"timestamp": "2019-04-22T22:45:09",
"url": "https://www.scia.net/en/company/references/projects/martinet-footbridge-first-use-uhpfrc-switzerland?language=nl",
"language": "en",
"source": "c4"
}
|
Her Energetic, Contemporary Songwriting and Strong Vocals make her an awesome Cross-Over Artist, with Indie Roots but she is Major Label ready. Crystal’s songwriting is well-crafted and radio competitive, heavy on visual lyrics. Her performance is equally strong providing the immediate sense of connection to the music in a real heartfelt way. She sings with soul that comes from a place that seems lost to most of us but is natural and always shining from her voice.
Crystal has been singing since she was born. With a microphone over her mobile, singing came before talking. For those who see her or know her, she is always humming along to some melody in her heart.
Most of her time is spent writing musing over her music and collaborating with friends. Crystal is constantly writing and recording. She spends time in the recording studios of Pittsburgh as a Studio Vocalist. Crystal is actively involved in the Pittsburgh music scene, the Twitter Community and the RAW Artist Network.
I’m over the moon, I’m amazed to announce that I spent a week in sunny Los Angeles, CA. The good people at Wurrly gave me the chance of a lifetime, recording an original song at Geffen Records with their executive team. Whaaaat?!?! I must be using a lot of good karma right now and if you are kind enough to help me get through the last stretch of scratching together the funds then together we are fully able to make my dreams and long time goals become a reality. I’m taking what I learned in LA working with the best producers in the business and bringing it back home to record an EP of revised music that I’ve been working hard to tell the story of the last couple of years. It’s been a wild ride and the fun is just getting started.
I am grateful to both organizations & also want to thank Broadcast Music, Inc. and Cliff Goldmacher for highlighting this contest so that I could be aware of it.
Truly, I feel humbled and head spinning excited to have a grand opportunity like this. I promise to use it wisely.
*Wurrly is a Karaoke/Singing App. It’s so much fun and you can check out my original songs and covers by downloading it from the App Store and trying it out for yourself.
Copyright © 2019 — Crystal Morgan • All rights reserved.
|
{
"timestamp": "2019-04-25T00:09:34",
"url": "https://crystalmorganmusic.com/",
"language": "en",
"source": "c4"
}
|
Blepharoplasty, or eyelid surgery, is a procedure to improve the appearance or functioning of the eyelids by tightening or removing skin around the eyes. It can be done on both the upper and lower eyelids, and includes removing excess folds of skin, fatty deposits, and bags beneath the eyes or correcting sagging upper eyelids and drooping lower lids. Blepharoplasty is often done in conjunction with other surgical procedures such as forehead, eyebrow and face-lifts.
Post-surgery, you may find that your eye area is more sensitive to wind and bright light for a period of time. Initial healing post-surgery may include some numbness, irritation at the incision site, dry eyes, and swelling or bruising, all of which will resolve within one to two weeks. Discomfort can be minimized with medication, cold compresses, and lubricating ointment.
|
{
"timestamp": "2019-04-22T22:58:59",
"url": "https://drjoangreco.com/surgery/eye-lifts/",
"language": "en",
"source": "c4"
}
|
Zumbro Valley Health Center is seeking a School Linked Mental Health Therapist to provide direct and indirect clinical services to adults, children and/or families. The therapist will provide mental health services located in the Kingsland School District to increase access for students who would otherwise have to leave school to receive these services and for students who cannot access these services because their families do not have the ability, availability and/or unable to meet with service providers outside of school.
Conducts psychological testing if licensend as a psychologist.
Master's degree in Counseling, Psychology or Social Work.
Professional licensure in the State of Minnesota (LP, LPCC, LGSW, LICSW) as appropriate to the incumbent’s professional degree and experience. Clinical trainees will be considered.
|
{
"timestamp": "2019-04-22T20:44:54",
"url": "http://www.zvhc.org/employment/school-linked-mental-health-therapist.php",
"language": "en",
"source": "c4"
}
|
Mumford and Sons, Bruno Mars the Lumineers and loads more.
makes Supertones stand out from your average covers band.
of many instruments having studied music he provides crowd punching solos night after night.
Comfortable playing Lead or rhythm Guitar and even drums on occasions ,Robbie is the backbone of the band .
to make Supertones a formidable four piece cover band .
well as corporate events and weddings.
Supertones offer something for every age group and can cater for all types of occasions.
|
{
"timestamp": "2019-04-26T00:18:37",
"url": "http://pubentertainment.ie/?albums=demo-stone-cold-sober",
"language": "en",
"source": "c4"
}
|
How many times have we all opted out on going to party or dinner where we either knew few people, or were only on the good acquaintance level with most attendees, based on the “Small Talk Factor”?
When it comes to small talk, the effort is anything but small. In reality, the prospect of having to small talk all evening is exhausting.
This Ted Post on how to turn small talk into smart conversation, looks at Small Talk as an opportunity to have a truly interesting and out-of-the-box conversation.
A little absurd? Perhaps. But what is the harm, really?
When we think about it, we didn’t know any of our friends at some point or another. Perhaps someone of our nearest and dearest we met as children – and if you are still lucky enough to have friends you have know that long, all the power to you – but many of our friends we met later on.
“Clicking” is a thing. Definitely. However, there are other factors at work. Depending on the day, the events of that months, a person can be in a better or worse mood and either feel like taking charge of social cues to start a “real” conversation or not.
Is it possible we don’t give many people the chance to have a meaningful conversation with us?
What we do know is that when you ask more in-depth, interesting questions, you get more in-depth, interesting answers back. Worth a try, no?
What do you think? Comment in the section below telling us how much more often you think you would find yourself engaged in meaningful conversations if you try Ted’s version of “Small Talk”?
|
{
"timestamp": "2019-04-19T00:33:34",
"url": "https://www.y5creative.com/blog/small-talk-the-untapped-opportunity/",
"language": "en",
"source": "c4"
}
|
A month after a former Puyallup woman was reported missing in Utah, her husband began packing for a permanent move to Washington.
Joshua Powell, the husband of Susan Powell, returned to Utah from Puyallup to retrieve his belongings, say friends and a spokeswoman for Susan Powell’s parents. He and the couple’s two young sons, Charlie, 4, and Braden, 2, had been staying with Joshua Powell’s father in Puyallup since Christmas.
Friends of the Powells have said Joshua Powell was fired from his job as a computer programmer for a trucking and warehousing company and now plans to sell the family’s home.
Joshua Powell remains the only person of interest investigators have identified in his wife’s case. He gave police a DNA sample but has not spoken with investigators in detail about his wife’s disappearance since hiring an attorney to represent him.
|
{
"timestamp": "2019-04-26T16:41:41",
"url": "https://www.thenewstribune.com/news/special-reports/article25858672.html",
"language": "en",
"source": "c4"
}
|
3546.28 hours ago, Trader: Sell EURCAD now or later at Price 1.5010 to T.Profit 20 (+5) pips, S.Loss 10 (+5) pips.
3644.32 hours ago, Trader: !: Sell GBPJPY now or later at Price 145.23 to T.Profit 20 (+5) pips, S.Loss 10 (+5) pips.
4335.97 hours ago, Trader: Buy EURCAD now or later at Price 1.4891 to T.Profit 15 (+5) pips, S.Loss 10 (+5) pips.
4854.97 hours ago, Trader: Buy EURUSD now or later at Price 1.1467 to T.Profit 30 (+5) pips, S.Loss 15 (+5) pips.
4860.17 hours ago, Trader: Buy EURUSD now or later at Price 1.1517 to T.Profit 20 (+5) pips, S.Loss 15 (+5) pips.
18064.57 hours ago, Trader: Unsure Buy CADJPY later at Price 81.50 to T.Profit 500 (+60) pips, S.Loss 500 (+60) pips.
21667.65 hours ago, Trader: Unsure Sell EURCAD now or later at Price 1.4853 to T.Profit 1.4704 (-5 pips), S.Loss 1.4964 (+5 pips).
22290.1 hours ago, Trader: Unsure Sell CADCHF now or later at Price 0.7420 to T.Profit 90 (+5) pips, S.Loss 90 (+5) pips.
22464.5 hours ago, Trader: Unsure Sell CHFJPY now or later at Price 105.212 to T.Profit 70 (+5) pips, S.Loss 70 (+5) pips.
22669.13 hours ago, Trader: Unsure Buy EURUSD now or later at Price 1.1127 to T.Profit 60 (+5) pips, S.Loss 60 (+5) pips.
23661.35 hours ago, Trader: AUDCAD W1 Sell trend is currently weak. Keep in touch.
24011.55 hours ago, Trader: Unsure Buy AUDJPY now or later at.Price 78.63 to T.Profit at 79.36 (+10 pips) and S.Loss at 78.19 (-10 pips).
24056.83 hours ago, Trader: Unsure Buy AUDCHF later at.Price 0.7344 to T.Profit at 0.7377 (+5 pips) and S.Loss at 0.7314 (-5 pips).
24057.87 hours ago, Trader: USDJPY trend is analysed, but I could not release it.
24185.95 hours ago, Trader: Unsure Sell CADJPY now or later at.Price 81.89 to T.Profit at 81.07 (-10 pips) and S.Loss at 82.31 (+10 pips).
24212.42 hours ago, Trader: GBPJPY trend is analysed, but I could not release it.
24302.13 hours ago, Trader: Unsure Sell CHFJPY later at.Price 108.09 to T.Profit at 106.62 (-10 pips) and S.Loss at 109.20 (+10 pips).
24324.92 hours ago, Trader: Unsure Buy EURAUD later at.Price 1.4551 to T.Profit at 1.4607 (+5 pips) and S.Loss at 1.4517 (-5 pips).
24393.17 hours ago, Trader: GBPUSD trend is analysed. It is available on the home page.
24469.72 hours ago, Trader: Unsure Buy EURCAD later at.Price 1.4375 to T.Profit at 1.4455 (+5 pips) and S.Loss at 1.4274 (-5 pips).
24499.3 hours ago, Trader: CHFJPY trend is analysed. It is available on the home page.
24511.83 hours ago, Trader: Unsure Buy CADCHF later at.Price 0.7487 to T.Profit at 0.7567 (+5 pips) and S.Loss at 0.7433 (-5 pips).
|
{
"timestamp": "2019-04-24T03:50:29",
"url": "http://www.ranrahas.com/home/analysis-screenshot.php?view_screenshot=1615",
"language": "en",
"source": "c4"
}
|
Get a NEW GBC Part #1132896 (NONSTK-WASHER SPRING USE 9779934) shipped to you!
To order a 1132896 NONSTK-WASHER SPRING USE 9779934 by phone, call 1-866-455-9900. Thank you for choosing Skyline!
|
{
"timestamp": "2019-04-20T00:34:20",
"url": "https://www.onlineskyline.com/GBC-Part-Number-1132896-NONSTK-WASHER-SPRING-USE-9779934",
"language": "en",
"source": "c4"
}
|
During my lifetime, marriage has changed a lot.
At the time my father passed away on October 31, 2010, my parents had been married for over 58 years. On Memorial Day, Mom and I drove to the Georgia National Cemetery and said a prayer together, thanking God for the gift that Dad was to her and our family, and asking for strength and courage as we learn to live without him, one day at a time.
The eighth of nine children, my father enlisted in the Navy in January 1945, two weeks prior to his eighteenth birthday and unknowing that the war would end before he saw action. He was honorably discharged in July 1946, the same year that he met my mother; he was nineteen and she was fifteen. When they married six years later, there was no money for a reception or even a wedding dress. They said their vows in church before family and friends who sprinkled them with rice as they departed to begin their life together.
Ten years ago, my siblings and I hosted a golden anniversary party for them. It was the most fun evening of my life — and that includes my own wedding day and my silver anniversary party a few years ago. Young and old attended, including my parents’ college roommates, work colleagues, neighbors, friends from church and extended family who came from long distances. My parents finally got to cut their wedding cake, toasts were made, and all who could still walk danced the night away.
Growing up, I never doubted their love for each other and for their children. They were always affectionate, relying on each other for support as they faced many trials together. They were grateful for all the joy they experienced in one another and in their family. Forgiveness and a sense of humor were two very important ingredients in their life as husband and wife.
When mom and I arrived at the cemetery last Monday, she wanted to show me the short handwritten note she had written to Dad to leave with the bouquet of red, white and blue flowers she had brought. I felt surprised and honored that she wanted me to read it. Of the two of them, Dad was the writer, and he was even more sentimental than she is. But in her note, in just a few sentences, she expressed the essence of her lifelong love for him, her devotion and her pain at losing him. She even mentioned the shorthand symbol for “I love you” that she and Dad had used when they were young — the texting emoticon of an earlier time — and that they had had made into matching pendants.
I was overcome with emotion as we placed her note in the envelope and in the bouquet and as we stood together remembering Dad. Marriage is not always easy, but two people who share a lifetime of love and laughter can still find joy and happiness.
|
{
"timestamp": "2019-04-20T16:56:46",
"url": "https://juliamcdermottbooks.com/2012/06/04/till-death-do-us-part-le-mariage/",
"language": "en",
"source": "c4"
}
|
Have you encountered a problem with a SVO file? Don’t you know which program opens a file with this extension? You will find all the information you need about working with a SVO file here. In the further part of this page we have added a list of programs that should open your SVO file. It is enough you choose a proper application for your operating system, download and install it.
Absolutely most often appearing reason that prevents you from opening the SVO file is the lack of a proper application to support it in your operating system. It is notably the first thing you need to address. When one of the programs to support a SVO file from the list is already installed, you can try to rerun the file. The system should display a message asking you to choose a primary application to support SVO files. At this point we are looking for disk space where the application was installed in and we can link it with a SVO file. Since then, our operating system will use the selected program to support all SVO files.
|
{
"timestamp": "2019-04-19T20:36:16",
"url": "https://www.icdatamaster.com/extension/svo",
"language": "en",
"source": "c4"
}
|
For expert newsletter writing and editing in Minneapolis, call 612-781-3731.
Newsletters are a great way to establish and maintain regular communications with employees or customers. I tell new clients to start out slow. Publish quarterly, then, as you gain momentum, move to a bi-monthly or monthly schedule. And make sure the material you publish is of interest to your audience!
|
{
"timestamp": "2019-04-26T11:58:02",
"url": "http://homegrowncommunications.biz/newsletters",
"language": "en",
"source": "c4"
}
|
5. T shirts / shirts without a collar.
6. Shorts with a minimum length of two inches above the knee are permitted. However, shorts are not permitted at the post tournament function.
Green Fees: Rs.500 + S. T.
Driving Range Fee: Rs. 50/- + S.T.
Professionals (Yellow Apron) – Rs. 450/-.
Golf Kit – Rs. 200/- + S.T.
|
{
"timestamp": "2019-04-24T07:57:34",
"url": "http://jwgcmysore.com/jwgc/information_visitors",
"language": "en",
"source": "c4"
}
|
SB Friedman Development Advisors provides analytical, strategic and financial consulting services to help our clients conceive and implement high-impact development and redevelopment projects.
Founded in 1990, we serve a full range of clients in the public, private and nonprofit/institutional sectors.
Our mission is to guide and enable our clients to create high-quality places through the practice of real estate economics, development finance and urban planning.
|
{
"timestamp": "2019-04-26T16:06:35",
"url": "https://sbfriedman.com/",
"language": "en",
"source": "c4"
}
|
How often do we do nothing for Jesus?
How often do we do ‘nothing of eternal value’?
And what does that NOTHING mean? It means NOTHING! It means we can do absolutely nothing of eternal significance apart from Jesus. That is, all our ‘righteous acts’ are like filthy rags [Isaiah 64:6] to our Heavenly Father. By ‘righteous acts’ I mean ‘self righteous acts’ of our flesh that come out of our pride / our spiritual pride / our religious pride.
Now there are some words that could appeal to our flesh! “Ask whatever you wish, and it will be given you”. Hmmm, I’ll have a new car and a new house and a new stereo. SPEW! What am I saying! These are Spiritual Words for our spirits! It is a conditional promise based on us REMAINING IN Jesus and HIS WORD REMAINING IN us.
Are we going to choose life or are we going to choose death?
to Jesus’ words and prayer in John 17.
Today, if we are listening and hear His voice Jesus wants to separate us for the work of His eternal Kingdom [John 17:17 – “Sanctify them by the truth; your word is truth”], do we choose to be ONE with Jesus, in the same way that Jesus is ONE with the Father? Jesus prayed it for us! This is available to all those who are called by His name.
May Jesus, and His joy, and His love, be IN you.
|
{
"timestamp": "2019-04-25T01:44:42",
"url": "https://enlightenedhope.com/2009/09/05/doing-nothing/",
"language": "en",
"source": "c4"
}
|
Students demonstrate proper space awareness by moving safely away from others in the playing area.
May is National Physical Fitness and Sports Month. Get moving with lesson and activity ideas to encourage and motivate students today!
Running, jumping, walking, leaping! Display this image of characters performing dynamic movements, and encourage your learners to have active and healthy bodies!
|
{
"timestamp": "2019-04-18T10:52:49",
"url": "https://www.lessonplanet.com/teachers/on-the-move",
"language": "en",
"source": "c4"
}
|
Hero Tarun and Raviteja's Brother in drugs mafia?
Hero Tarun and Raviteja’s Brother in drugs mafia?
Madhapur police have arrested film producer K Vankateswar Rao on charges of drug. Police are investigating the case and the information scrolled on several TV channels is as, 1. A child turned hero is involved in this drug mafia. 2.Famous hero and his brother are involved in this drug mafia 3. An actor turned manager is also involved in this drug mafia.
Rumors are doing round that K Venkateswara Rao, who was arrested with drugs few days back has named Tarun and Ravi Teja’s brother Raghu as being his accomplices in the drug mafia. According to the Madhapur police, K Venkateswara Rao has revealed that these two are also involved in the drug racket. the police claim that some part of the drugs every month goes to Tarun’s pub by name ‘ON’.
Police claim that these two film heroes are absconding and could not be reached.
But police who initially suspected Bellamkonda Suresh in the drug mafia initially say that he might not have any involvement in this mafia. The police initially suspected Suresh as the Innova car which was caught along with the drugs was also used for the film ‘Shambo Siva Shambo’ for which Suresh was the producer. However Suresh revealed that it was supplied on rental basis for the film by a person called Prakash who incidentally is a small time producer.
|
{
"timestamp": "2019-04-18T11:18:46",
"url": "https://www.chitramala.in/hero-tarun-and-raviteja-s-brother-in-drugs-mafia-118745.html",
"language": "en",
"source": "c4"
}
|
Go launcher theme for Sony Xperia Acro S and other Android smartphones and Tablet PC.
Go launcher theme for Motorola Droid Razr HD and other Android phones and Tablet PC.
Android Go launcher theme for Samsung Galaxy Tab 2 and other smartphones and Tablet PC.
|
{
"timestamp": "2019-04-19T09:28:08",
"url": "http://onsmartphone.info/download-sol-115648",
"language": "en",
"source": "c4"
}
|
ss tool box authentic coil master kit new steam snap on.
ss tool box phoenix x steel body door with 3 drawers snap on stainless.
ss tool box boxes suppliers and manufacturers at craftsman flat black snap on toolbox garage shop chests auto pro series stainless.
ss tool box global market supreme key logo print silver size free new old stock items and unread craftsman stainless review.
ss tool box kit jaguar craftsman 53 stainless.
ss tool box boxes snap on for sale china rolling cabinet drawer steel locking storage toolbox claics wood top kobalt.
ss tool box toolbox manufacturer stainle steel supplier a exporter craftsman 53 stainless.
ss tool box husky chests storage the home depot in drawer mobile workbench with solid wood top black truck.
ss tool box roll out truck bed storage s rolling toolbox snap on stainless steel top.
ss tool box white boxes for utes snap on craftsman stainless steel review.
ss tool box portable stainless steel home storage tools packaging equipment transport motorcycle trunk truck.
ss tool box us general parts holder storage system tools snap on stainless steel top.
ss tool box buyers polished x toolbox husky.
ss tool box manufacturer service provider supplier craftsman stainless steel review.
ss tool box buy beta tools 1 made of plastic snap on stainless steel top.
ss tool box toolbox mounting brackets in x l shaped stainless steel are used for toolboxes the universal hole pattern allows quick and easy snap on chevy.
ss tool box boxes white image 1 snap on 9 drawer top chest black steel under body toolbox w door x cm craftsman viper.
ss tool box standard single lid side mount kobalt.
ss tool box for android mobile phone artifact stainle steel repair in power sets from tools on aliexprecom snap.
ss tool box custom painted best offer tools machinery in south ca napa.
ss tool box stainless steel chest snap on flat black.
ss tool box china wood top on global sources craftsman.
ss tool box inch drawers wholesale stainless steel buy viper boxes.
ss tool box steel truck boxes with stainless door buyers products snap on.
ss tool box boxes black steel under body toolbox w door x cm viper storage premium series inch 5 drawer rolling cabinet truck.
ss tool box multi bracelet tools portable with wheels code camping.
ss tool box snap on third generation f body message boards flat black.
ss tool box cl 2 toolbox latch hinges latches husky.
ss tool box sales how can i provide the right storage solutions for my one toolbox trend is to integrate outlets into instead of it being an afterthought or add on camping.
ss tool box 2 truck latch lock buy snap on.
ss tool box manufacturer from id kobalt.
ss tool box chest organizers drawer organizer s organi.
|
{
"timestamp": "2019-04-20T14:43:02",
"url": "http://willitrain.info/ss-tool-box/",
"language": "en",
"source": "c4"
}
|
DNSUnlocker is a widely distributed piece of adware that disguises itself as a service to let users stream their Netflix, Hulu, and other services from other areas of the world to unlock access to different shows. While this may sound great, the real use of the program is clouded by abundant advertisements that slow down your computer and invade your privacy. This is a piece of software designed solely to show you Ads, and is what’s known as ADWARE. The company behind this product makes several other pieces of adware, such as FirstFlix, NextFlix, ANYFlix, and others.
The scary thing about the DNSUnlocker adware is that it changes your DNS settings, which means it can alter the web traffic coming to and from your computer. In doing so, they are able to inject piece of code into your web browser that change the way each website looks. What adware companies like this do is change the structure of web pages to display additional advertisement in them that they control. They are then paid for each view of these advertisements. The result is that you might see pop-up ads and banner ads on sites that never had them before, like on Google’s homepage for instance.
Removing this type of adware is extremely difficult for people with no computer knowledge, and the developers of this software have gone through great lengths to make sure their software keeps coming back even after you remove it. The steps outlined below will help eradicate this annoying adware from your computer once and for all.
While professional malware removal tools like the one we recommend do the job perfectly, this step will work for more advanced users. Go to your Control Panel > Network and Sharing Center > Change Adapter Settings > Right click your active internet connection (usually Wi-Fi unless you are on a desktop plugged in to the internet) and click properties. From the networking tab, scroll down until you see Internet Protocol Version 4 (TCP/IPv4), highlight that and click properties. Both options in this window should be automatic. The first option must be set to “obtain an IP address automatically” and the second to “obtain DNS server automatically.” Click “OK” and close the window and go back to browsing like normal. You should no longer see ads from DNSUnlocker.
ads by DNSUnlocker is a piece of adware, or potentially unwanted program (PUP) that acts similarly to a virus. These are not inherently dangerous to your computer but are very annoying and can slow down your computer and make browing the internet a nightmare.
ads by DNSUnlocker will display various types of advertisements, including pop-up advertisements, text ads, banner ads, and different types of coupons and deals. It can display ads inside of all web browsers, but usually targets major browsers like Chrome, Firefox, and Internet Explorer because they have the biggest userbases. Usually the ads associated with this adware will be branded with the words: "Ad by ads by DNSUnlocker", "Ads by ads by DNSUnlocker", "Powered by ads by DNSUnlocker", or "Brought by ads by DNSUnlocker".
The advertisements brought to you by ads by DNSUnlocker are often malicious in nature and can include various types of technical support scams, or fake software updates. Usually you will see pop-ups if you click anywhere on a website. This is easily noticeable on websites such as Wikipedia which don't normally serve any ads whatsoever.
Adware like this can be very difficult to remove because at the time of installation several different files may have been installed. It is also likely that you are infected with more adware than just ads by DNSUnlocker. It is common practice for download providers and free download websites to bundle adware and other junk inside of their download and offer them to you at the time of installation.
It is also very important to follow safe browsing guidelines when you surf the internet. Do not download anything from random third-party websites, and if you must pay attention to what you agree to install during the installation process. A lot of times adware like the one causing ads by DNSUnlocker will be included in downloads like these and you may agree to install them without even knowing.
Performing the steps below completely should entirely remove the ads by DNSUnlocker infection from youe PC. Please follow the instructions in the correct order, and consider printing this guide or bookmarking this page (CTRL+D) for future reference.
The ads by DNSUnlocker adware is designed solely to make money by showing you advertisements, hence the name adware (aka advertising-supported software). It generates traffic, collects personal information, and displays advertisements within your web browsers.
Using an automated ads by DNSUnlocker removal method can be useful for users who are having difficulties manually removing the threat. Automated methods can also be time saving and you might catch additional threats you did not know your computer was infected with. It's important to compeltely scan your computer for malicious programs on a regular basis.
SpyHunter is designed to scan your computer for malicious threats and remove them for you, including ads by DNSUnlocker and other adware or malware. We recommend this solution if you are having difficulties in removing malware from your computer.
|
{
"timestamp": "2019-04-20T22:42:18",
"url": "https://www.malwarerescue.com/remove-dnsunlocker-solved/",
"language": "en",
"source": "c4"
}
|
Fantasy Bugs Pattern Tablecloth from 67273 tablecloths will be an excellent choice to add a unique design to your home decoration. Its true colored and 3D printed design will be an elegant and final touch into the service in your dining room. You can dress up your dining tables with 67273 table covers in any sizes from 52x70 to 60x90.
67273 themed and square table linens will create a style in every design. You will enhance your home decor with your favorite tablecloths that are available for sale on Ambesonne.com and it will cost only $34.90. Shop now in our online store with free shipping!
|
{
"timestamp": "2019-04-23T20:26:53",
"url": "https://www.ambesonne.com/tablecloths/fantasy-bugs-pattern-tablecloth",
"language": "en",
"source": "c4"
}
|
Windsurf Village Baia dei Delfini - Porto Pollo. Porto Pollo is by far more than one of Europe's best windsurfing spots! At the Windsurf Village everybody will get one's money worth. Sardinia's wild and romantic north coast captivates you with countless, most natural sandy beaches, surrounded by fantasticly ragged rocks. The turquoise waters are crystal clear and clean.
|
{
"timestamp": "2019-04-19T18:51:12",
"url": "http://www.sardegna-tourism.com/residences/baia-dei-delfini.html",
"language": "en",
"source": "c4"
}
|
POLYPHASER Outdoor 48V Surge Protector offiers an outdoor data line transient protection solution which supports Ethernet/Cat 5e applications.
Description: Outdoor 48V Surge Protector offiers an outdoor data line transient protection solution which supports Ethernet/Cat 5e applications.
Digital data line protectors for CAT 5 cable. Used for applications such as Ethernet, Power over Ethernet, RS-323, RS 422 and RS 484. It's multi-stage, solid state design makes it multi-strike capable. Surge rated to BELLCORE 1089, 10/1000 USEC @100a. UL497B listed. Handles wire sizes from 16 to 28 AWG (screw terminal connectors). Does not accommodate battery or ringing voltage. Flange mounts on or near equipment. RoHS compliant.
Single-Mode SFP 1310. Features. SFP Connection Type: SC. Description: Single-Mode SFP 1310. SFP Type: SFP. Fiber Mode: Single-Mode. Hardened: No. Mfg. Warranty: 1 Year.
Replacement gas tube with 90 static sparkover voltage. Andrew Gas Tube Replacement Kits for all "ARRESTOR PLUS" arrestors. Available for 90 thru 1000 Static Sparkover Voltage. Kit of 10. Comes with a 10-year warranty.. Specs.
|
{
"timestamp": "2019-04-21T10:15:22",
"url": "https://www.solidsignal.com/pview.asp?p=1101-1067",
"language": "en",
"source": "c4"
}
|
If you ever need any packing done, Edward is the man to call. What started out as a simple box has been elevated to the level of magnificent sculpture. He managed to use four different boxes and half a roll of tape to create this masterpiece!
|
{
"timestamp": "2019-04-23T06:25:48",
"url": "https://www.raphaeldesign.co.uk/expert-packaging/",
"language": "en",
"source": "c4"
}
|
Richard is a Partner within the Carter Jonas' Eastern Region Planning Team. His planning expertise covers residential, commercial and mixed-use projects, with involvement in the submission and delivery of major planning applications, Environmental Impact Assessment (EIA) preparation, site appraisals, planning appeals and site promotions through the Local Development Framework (LDF) process.
Carter Jonas’ Cambridge Planning team helped secure detailed planning permission for 20,677sqm GEA of B1 floorspace on Green Belt Land adjacent to the existing Peterhouse Technology Park. The new floorspace will support ARM Holdings’ growth plans, enabling it to maintain its global leader position in micro-processor Intellectual Property.
Advanced RISC Machines (ARM) were founded in 1990, and set up its business on Fulbourn Road, Cambridge four years later. The company originated as a spin out of an Acorn and Apple Computers collaboration. Acorn developed the world’s first commercial RISC processor for low-cost PCs and the collaboration sought to create a new microprocessor standard. In the same year, ARM attracted its first investor and licensee. In 1998 ARM was floated on the London Stock Exchange and NASDAQ and the year after became a FTSE 100 company. In 2002, ARM had shipped over one billion microprocessors; by 2014 this figure had increased to 13 billion.
In 2016 ARM was acquired by Softbank for £23.4bn. The planning application, submitted in April 2015, which received permission in December 2015, will provide ARM with the new accommodation it needs to help maintain its global market leader position.
The site lies within the Green Belt, and has been proposed in the draft local plan for Green Belt release. However, owing to the timetable for adoption of the Local Plan i.e. early 2018, the planning application was submitted on the basis of ARM’s Very Special Circumstances for development in the Green Belt, in order to ensure accommodation could be delivered within ARM’s growth timeframe requirements. The application was supported by a number of technical documents, including an Environmental Impact Assessment.
A series of pre-application meetings with the Local Planning Authority were carried out, in addition to a presentation to the Design and Conservation Panel, and two separate public consultation events.
Planning permission was unanimously granted at planning committee in September 2015, five months after submission.
Whether you are looking to acquire or lease an industrial property, or you are seeking an industrial property agent to source appropriate tenants, Carter Jonas’s specialists can help you.
|
{
"timestamp": "2019-04-26T12:02:55",
"url": "https://www.carterjonas.co.uk/case-studies/planning-and-development/arm-holdings-campus-expansion",
"language": "en",
"source": "c4"
}
|
Tucson, Ariz. – May 8, 2018 – Baird, an international, employee-owned wealth management, capital markets, private equity and asset management firm, announced today that it has added veteran Financial Advisors Irv Mindes, Managing Director, and Bill Fedor, Senior Vice President, in Tucson, Ariz. They are joined by Marcie Shatz, Branch Administrative Supervisor, and Christy Yetka, Senior Client Specialist. Baird’s Tucson wealth management office is located at 3567 E. Sunrise Drive, Suite 143.
Mindes joins Baird with more than 35 years of industry experience. He graduated from the University of Arizona with a bachelor’s degree in government and minor in economics. Mindes currently resides in Tucson with his wife, Terry.
Fedor brings nearly 25 years of industry experience to Baird. He graduated from Arizona State University with a bachelor’s degree in business, and also received his MBA in finance from the University of Arizona. Fedor and his wife Beth currently reside in Tucson.
|
{
"timestamp": "2019-04-22T23:03:54",
"url": "http://www.rwbaird.com/news/baird-adds-four-to-tucson-wealth-management-office",
"language": "en",
"source": "c4"
}
|
Amorem Cleansing Body Oil 200 ml.
Peonia Nobile Body Cream 150 ml.
Evening Rose Body Cream 150 ml.
Pomegranate Noir Exfoliating Shower Gel 200 ml.
Botanical Aqua Mysteri Shower Gel 200 ml.
Gold Sugar Scrub 200 ml.
Pure Xs Femme Body Lotion 293 ml.
Exfoliating For Body Tube 200 ml.
Eau Claire des Merveilles Scented Shower Gel 200 ml.
Grapefruit Body Crème 175 ml.
La Vie Est Belle Bath Oil 200 ml.
Velvet Rose & Oud Dry Body Oil 100 ml.
Dark Amber & Ginger Lily Body Crème 175 ml.
|
{
"timestamp": "2019-04-19T20:48:14",
"url": "https://production.shop.magasin.demandware.net/s/mdn/skoenhed/kropspleje",
"language": "en",
"source": "c4"
}
|
Maybe the 'king' part isn't quite true (or rather, not at all) but I'm back in the good old SLC. I survived the trip, which will probably become a multi-part epic starting sometime this week, an got back in town just in time to watch it start snowing.
The regularly irregular blog posts will begin shortly. Until then, here's a couple of pictures to keep you interested.
I had to pay about sixty cents for that last one. Totally worth it.
i want that baby goat!!!
|
{
"timestamp": "2019-04-19T08:20:15",
"url": "http://www.trevorhale.com/2010/05/return-of-king.html",
"language": "en",
"source": "c4"
}
|
Don’t Provoke Me. Wait: Do.
Mrs. Kirkistan and I have been chatting about those people in our lives who show up with questions rather than answers. These are folks who wonder “Why?” and “How?” about the most ordinary, obvious things. We typically have great conversations with them even as they challenge, occasionally infuriate and often delight us. And quite often their questions and the acts they take to resolve those questions have a way of working into my brain through the week. And I find myself asking questions as well.
I’ve been trying to understand a complicated philosopher whose writing was famously obscure. I recently came across two of his interpreters whose comments helped me flesh out the larger setting for this philosopher’s comments. Mr. Peter Dews and Ms. Diane Perpich helped me understand that there is more to Emmanuel Levinas than the Other and ethics as “first philosophy.” Ms. Perpich, in particular, has helped me begin to see that the stringent obligation Levinas puts on our encounter with the other may function less as an ethics manual and more as provocation. This makes terrific sense when I start to work out the details of my obligation to others (as Levinas might suggest). His comments become directional rather than prescriptive.
But even with the insights from Mr. Dews and Ms. Perpich, there is something about Mr. Levinas that moves beyond directional-only. His provokements have a way of landing at the most inopportune times: making me question the bosses’ speech in the conference room or the story of the revered leader. Making me wonder at my own treatment of others, from driving to the simplest conversation.
Such provocation seems a good thing—perhaps I’ll be shaken from my comfortable rut.
|
{
"timestamp": "2019-04-22T06:36:06",
"url": "https://livingstoncontent.com/2013/04/01/dont-provoke-me-wait-do/",
"language": "en",
"source": "c4"
}
|
In the center of Winscombe there are many varied shops and eateries,the chip shop does a mean fish and chips.Ameliah cottage is a very warm and cosy.Sam and Bev the owners were very welcoming to my dog Bella and my self. there were treats and toys for her and supplies of bread and milk,tea n coffee etc waiting for me.The kitchen is very well equiped.The garderen is very pretty,quite relaxing as was my week there.will visit again.next time only need to take myself,n clothes and of course Bella.really enjoyable,relaxing break!
It was clean,cosy and the facilities were good. The hosts were generous and friendly - nothing was too much trouble. Amber, our dog felt at home and this is important to us. There were even treats, food, bowls, a bed and toys for her!!. We hope to return in the Spring.
The cottage is small but has everything you need. A welcome pack on arrival including bread, milk, butter, tea etc. There were even new toothbrushes in case you forgot them! The cottage is situated in a lovely village and is close to lovely walks. It’s around 10 minuets drive to cheddar and 25 minuets to western super mare, both lovely places and very dog friendly. We loved it staying in the cottage and the garden was lovely with beautiful views. The only downside was that dogs were not allowed inside the village pub and it was a bit cold to sit outside. However, we found the Railway Inn about 25 mins walk away down the strawberry line and that was very dog friendly. All in all a lovely stay with lovely hosts who thought of absolutely everything to make our stay wonderful. Would definitely return.
From the moment we arrived, we knew we had made the right choice. The owners Beverley and Sam, made us feel very welcome and went above and beyond to make our stay comfortable. The cottage is very well equipped, comfortable, clean, and cosy. Our only problem being that we didn't stay longer. We intend to return to Amelyah Cottage as soon as we can.
Ideal base for exploring North Somerset. Quiet location so relaxing holiday if required. But close enough to the coast for a trip to the sea, Cheddar Gorge and other places of interest.
Good location for visits to Bath, Bristol, Western. Wells etc. Has been redecorated since photo's on site, now very dark in living space. Sadly very very strong smell of Dog in living area. Slight issue with fridge being behind kitchen door. We were lucky and with the weather able to eat outside at night, but in poor weather don't think dining area suitable, massive bathroom with corner bath but no shower curtain. so bathroom floods every time we showered. Very poor screening between garden and owners garden. they look directly into the bedroom !!
But the owner supplied everything else we needed.
Amelyah Cottage is a charming studio cottage located in the village of Winscombe in Somerset.
This compact cottage is perfect for a romantic holiday in a bustling part of England.
Next door to the owner's house, a walk up the driveway takes you into a delightful little studio cottage, full of charming artwork yet modern decor.
The kitchen is perfect for a couple's holiday, compact yet stylishly designed and well-furnished with all of the equipment necessary for a weekend in the South West.
Through the kitchen sits a cute seating area complete with a big comfortable sofa right in front of the TV making the ideal spot for a night time relax after a busy day in the never-boring village of Winscombe.
The inside of this studio cottage is complete with a welcoming double bed and large modern bathroom, finishing off a delightfully cosy, homely cottage.
At the foot of the bed lies probably the biggest asset of this property, the garden.
It contains two decked areas along with artificial grass with a beautifully hand-crafted seat with two big wooden wheels as the arm rests.
The garden is complete with more furniture, cedar wood sauna available exclusively to the guests and a BBQ, on a decking overlooking the beautiful corn fields and countryside beyond.
Amelyah Cottage is set in the heart of Winscombe, a very short walk from the exciting village bursting with character.
Winscombe offers a whole range of walking paths and countryside to explore along with a variety of shops and pubs to spend your days.
Away from Winscombe there are other places with even more things to do.
The well-known seaside resort of Weston-super-Mare is just over 8 miles away and offers so much in terms of beach activities and an amazing pier.
In the opposite direction sits the village of Cheddar, home to the famous Cheddar Gorge as well as the Mendip Hills.
A charming, compact cottage in a fantastic area of South West England.
Pub and shop 5 mins walk. Note: cedar wood sauna available exclusively for the guests.
|
{
"timestamp": "2019-04-24T10:59:35",
"url": "https://www.sykescottages.co.uk/cottage/DorsetSomerset-Sandford-Batch/Amelyah-Cottage-962794.html",
"language": "en",
"source": "c4"
}
|
Ashfield in Hebden, Nr Grassington sleeps 3 people. In the heart of Wharfedale, this comfortable and well presented cottage is set in an ideal picturesque village location. There is a lovely open fire in the cosy and tastefully furnished sitting room and a well equipped dining kitchen, perfect for holidays or short breaks at any time of the year. Enjoy leaving the car behind and walking directly from the doorstep through some of the most beautiful countryside in Yorkshire. This area of charm and character has changed very little over the years; the fields are bounded by the original limestone walls crisscrossing the farmland. Wander the myriad of footpaths by the river Wharfe or explore spectacular scenery of the local moors, the surrounding countryside is a haven for nature and wild life lovers alike. Hebden has a post office, a tea room and a country inn and the nearby larger village of Grassington arranged around a cobbled square has pubs, coffee shops and restaurants serving local specialities. This is a perfect cottage to stay in to enjoy the delights of the Yorkshire Dales.
Ground floor: entrance hall, sitting room with open fire, dining kitchen.
First floor: 2 bedrooms, 1 double bedroom with king size bed, window seat. 1 single bedroom with window seat. Shower room with shower cubicle, WC and wash hand basin.
Facilities: electric oven and hob, microwave, fridge/freezer, kettle, toaster. Dishwasher. Washing machine/dryer. Iron/ironing board. Flat screen colour TV, Sky Freeview, DVD player, Micro hi-fi system/CD player with docking for i-pod. Radio via TV. Hairdryer. Selection of books, games and local maps. Bed linen and towels provided. Electric central heating, starter pack of coal and logs for the fire included. Garden bench. Parking in front of the property on quiet lane. No smoking in the property please. Sorry no pets. Holidays at Ashfield run from Saturday to Saturday.
For a better idea of where Ashfield is, you can see Ashfield on the map below.
Ashfield is in North Yorkshire; should you be on the lookout for a special offer, you can find all the special offers in North Yorkshire. It's always worth checking to see what is on offer at the moment.
Do you want to holiday near Ashfield (4825), you can see other cottages within 25 miles of Ashfield; have a look to find your perfect holiday location.
|
{
"timestamp": "2019-04-20T11:01:41",
"url": "http://cottage-choice.co.uk/dales/cottages-Ashfield-4825.asp",
"language": "en",
"source": "c4"
}
|
Fixed in the latest version of python-iniparse please update.
The problem is I get this error message when I update.
i most cases it is a flash/adobe .repo file there is empty.
Just delete the empty file and everything will work again.
|
{
"timestamp": "2019-04-25T13:26:58",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=426326",
"language": "en",
"source": "c4"
}
|
You can follow the discussion on Using Twitter for Our Weather Delay Notifications without having to leave a comment. Cool, huh? Just enter your email address in the form here below and you’re all set.
|
{
"timestamp": "2019-04-24T22:10:21",
"url": "http://www.adammcfarland.com/comment-subscriptions/?srp=6579&srk=071cc9f9fe512e4451b154a3afdd61d3&sra=s&srsrc=f",
"language": "en",
"source": "c4"
}
|
Game Killer is quite a useful app, especially if you just like to mess around and not play competitively. Let’s move on and get it downloaded to your Android device. Game Killer apk is unfortunately not available to download from Google Play Store, just like Root Explorer, because it is an unlicensed App. But you can download it online and have access to some of the most powerful tools for your device. Once you have downloaded the app, it’s time to install it. There are many more features which you will discover once the App is installed and cater for the needs of basic users all the way to the most advanced. Now that you know a little more about the App, let’s take a look at installing it in this step-by-step guide.
How to install Game Killer apk?
This is the simplest part of Installation of the Game Killer Apk tool is extremely simple, but first you will need to allow your phone to install it.
When installing an application from a source other than Google Play, it is important to note that you MUST enable “Unknown Sources” installation in your settings.
Scroll down to “Security” and select it.
If it is not, simply click on it and you’re ready to go!
Now that you have primed your device for installation of unsigned Apps, let’s begin installing. The minimum Android system required to run Game Killer is Android v1.6 but you should be fine since most mobile devices are released with version 3.0 and higher. If not, you can always upgrade, provided that your device will support it.
When you first start out gambling online, look for sites that have large member bases and which are being mentioned favorably other places online. This could be in forums or on blogs, but there should be other sites at least referencing the sites you use. You can eventually learn about other sites that aren’t getting that much attention, but get your feet wet with the more popular sites that you can verify are legitimate.
It is best to stick with games that you are already familiar with when you first get started. This way you know if things are being played correctly and you will understand when you are winning and when you are losing fairly. If you aren’t familiar with the game it is more difficult to determine if you are losing because you are a beginner who doesn’t understand the game fully or if you are losing because of the odds or because something isn’t right.
Never invest money that you cannot stand to lose. It’s as simple as that. Use the same discretion here as you would with an offline gambling opportunity.
Many norsk casino gambling sites will state very favorable odds on their homepage, but you can’t assume this is going to prove accurate once you throw your money out there. Judge your odds at different sites through personal experience and what you read through other reputable websites related to the online gambling scene.
How much could you potentially win with a given website and with a given game? If the prizes seem too-good-to-be-true, then chances are you won’t have good odds at winning. Make sure the rewards are desirable but not so good you feel like you are trying to win the lottery for pennies.
|
{
"timestamp": "2019-04-19T05:09:50",
"url": "http://www.elzenberg.info/category/games/",
"language": "en",
"source": "c4"
}
|
Cargo traffic at several of the biggest U.S. West Coast ports has slowed to near gridlock, negotiators for shipping lines and terminal operators for 29 ports said on Monday as contract talks with the dockworkers' union remain strained.
Union officials however have denied staging slowdowns, saying some of decisions by managements such as cutting back on night shifts were responsible for the gridlock.
The Pacific Maritime Association (PMA) said that five of the region's largest ports, including the massive Los Angeles and Long Beach docks, have seen backups "approaching complete gridlock."
A shipping container is loaded onto a truck at the Port of Los Angeles in San Pedro, California.
Management has accused the International Longshore and Warehouse Union (ILWU) of orchestrating some slowdowns to bolster its leverage at the bargaining table in talks that have been under way for eight months.
"The ILWU slowdowns and the resulting operational environment are no longer sustainable," said PMA spokesman Steve Getzug in a statement.
"The PMA has a sense of urgency to resolve these contract talks and get our ports moving again," he added.
Union officials point instead to factors such as a shortage of tractor-trailer chassis used for hauling cargo from ports to warehouses and other management errors as causing the backups.
"Longshore workers are ready, willing and able to clear the backlog created by the industry's poor decisions," ILWU President Bob McEllrath said in a statement.
"The employer is making nonsensical moves like cutting back on shifts at a critical time, creating gridlock in a cynical attempt to turn public opinion against workers," he added.
A federal mediator is currently involved in the negotiations between the association and the union, which represents some 20,000 dockworkers. The workers' latest contract expired on June 30.
|
{
"timestamp": "2019-04-26T00:16:42",
"url": "https://www.cnbc.com/2015/01/13/us-shippers-say-west-coast-ports-near-gridlock-on-stalled-contract-talks.html",
"language": "en",
"source": "c4"
}
|
Government accuse wi-fi deceptions: A LEADING radiation expert has accused government scientists of “deliberately deceiving” the public about the safety of wireless internet networks.
A LEADING radiation expert has accused government scientists of “deliberately deceiving” the public about the safety of wireless internet networks.
Biologist Roger Coghill claims that a new Health Protection Agency (HPA) research programme into wireless local area networks will not address the real areas of concern.
The safety of wi-fi has been repeatedly questioned by a growing number of parents and experts after it has been linked to cancer and a condition called electro-sensitivity.
Independent scientists have also said that wi-fi should not be used in schools because of the risk of constant exposure to such radiation.
Carmarthenshire Council has expressed its concerns about the safety of wi-fi and has called for a code of practice to be drawn up.
And the Professional Association of Teachers (PAT) has demanded an inquiry into the health implications of the current programme to install wi-fi networks in thousands of schools.
Philip Parkin, the organisation’s general secretary, said the drive to set up classroom wireless networks should be halted until the dangers are known.
The HPA last week launched a systematic programme of research WLANs and their use, which will include measurements of exposures from the wi-fi network.
Professor Pat Troop, HPA chief executive, said, “There is no scientific evidence to date that wi-fi and wlans adversely affect the health of the general population.
“The signals are very low power, typically 0.1 watt (100 milliwatts) in both the computer and the router (access point) and the results so far show exposures are well within guidelines.
“Given this, there is no particular reason why schools and others should not continue to use wi-fi or other wireless networks.
But Mr Coghill, of Pontypool-based Coghill Research Laboratories, who has developed a powerful antioxidant to combat the damaging affects of wi-fi radiation, said, “We just don’t have enough research in place to know what the safe exposure level really is and that’s the result of the downright deception of the public by the HPA and power utilities.
“This is misdirected research using people with a negative opinion which will then be flogged out to the media with spin-doctored press releases.
wi-fi is becoming increasingly widely used in homes, schools, offices and throughout the general working and public environments - Wales has the highest number of wi-fi hotspots per million people in the UK, Germany, the USA or Japan, according to a report by Ofcom.
The concerns about the safety arise from the fact people absorb the radiation emitted by WiFi transmitters. A Panorama investigation found the readings of the signal strength at a distance of 50cm from a wi-fi enabled laptop were three times higher than the highest reading from a mobile phone mast.
Even higher readings than these would be found where children are seated close to the transmitters.
The research into wi-fI follows precautionary advice issued by England’s chief medical officer and the HPA discouraging the non-essential use of mobile phones by children.
Judith Davies, whose 16-year-old daughter is at school in Carmarthenshire, said, “The HPA has said it intends to compare the measurements it finds to international guideline recommendations.
“However, it needs to be realised that these guidelines only cover short-term heating effects and not the long-term effects from these low levels of microwave radiation which so many scientists are concerned about.
“These guidelines say they exclude potential long-term effects of exposure, such as an increased risk of cancer. Such a comparison has no relevance.
|
{
"timestamp": "2019-04-21T12:17:09",
"url": "http://www.avaate.org/spip.php?article947",
"language": "en",
"source": "c4"
}
|
Examination Torch Examination Torch -HLSI Examination Torch is used to check interior of the eye. This special torch shines a light through pupil allowing to see the detail structure of the pupil. Moreover, pupil reflexes are ...Examination Torch -HLSI Examination Torch is used to check interior of the eye. This special torch shines a light through pupil allowing to see the detail structure of the pupil. Moreover, pupil reflexes are also checked. These reflexes are checked for viewing the proper functioning of the pupil.
Industrial & Mining Torch Article No. JS 11009 | Model No. JS 220 Product Name : Spot Light Versus Flood Light Details : Type of light emission : Spotlight Batteries : 3xC Luminous intensity* : 437 cd Luminous flux : 30 lm B...Article No. JS 11009 | Model No. JS 220 Product Name : Spot Light Versus Flood Light Details : Type of light emission : Spotlight Batteries : 3xC Luminous intensity* : 437 cd Luminous flux : 30 lm Beam divergence angle** : 9° Battery-life*** : ca. 13h max. bright / ca. 50h max. oper.
|
{
"timestamp": "2019-04-26T04:52:58",
"url": "https://www.tradeindia.com/Seller/Electronics-Electrical-Supplies/Lighting-Display/Flashlights/",
"language": "en",
"source": "c4"
}
|
To receive a free copy of your credit report enter your promotion code.
A credit card is not required for your free credit report and score.
Your promotion code will be listed on the risk based pricing letter you received in the mail or from your lender.
If you don’t have a promotion code you can still receive a copy of your credit report just by clicking below on 'Get started anyway'.
Only one person can use a promotion code and only they are eligible for a free credit report.
Your name and promotion code must match our records to receive a free copy of your credit report and only one report is available per promotion code.
|
{
"timestamp": "2019-04-26T04:20:19",
"url": "https://hlp.guru/ForgotPassword.aspx",
"language": "en",
"source": "c4"
}
|
Blend flour, butter and salt in a food processor until mixture resembles fine breadcrumbs. Add egg yolk and water and blend until pastry forms a ball. Wrap and chill for 20 minutes. Roll out pastry to 5mm thickness and line 6 buttered individual quiche moulds or a 24cm flan tin with removable base. Prick pastry with a fork and blind bake* at 190°C for 10 minutes. Remove loading and allow to cool. Place vegetables over the base of the pastry. Whisk together eggs, cream and herbs and pour over vegetables. Arrange St Claire cheese slices on top. Place the quiche onto a baking tray and bake at 190°C for 30-40 minutes until quiche is golden and firm to the touch. Serve warm or cold with crisp garden salad.
*Blind Baking means to bake pastry without filling. Place baking paper in the centre of the raw pastry case and load with uncooked dried beans, pasta or rice. Bake until golden, remove loading and allow to cool.
Alternatives: try a filling of smoked salmon and capers; bacon and onion; ham and tomato; mushroom and herbs; or roasted vegetables.
|
{
"timestamp": "2019-04-21T04:43:35",
"url": "http://www.cheesematters.com.au/recipes/st-claire-savoury-quiche/",
"language": "en",
"source": "c4"
}
|
This article will step you through how to upload a video to Vimeo and then insert into your Coassemble course. To see how this can be achieved with Youtube, check out this article.
Go to Vimeo and follow the steps to create an account. (A free account allows you to upload 500mb per week with a Total storage limit of 5GB).
Note: If you have a paid account, you will be able to alter the Privacy of your video so that it is hidden from Vimeo users. It will not be searchable in Vimeo but will be able to be displayed within your course via the URL.
|
{
"timestamp": "2019-04-18T18:16:36",
"url": "https://help.coassemble.com/creating-content/lessons/uploading-videos-using-vimeo",
"language": "en",
"source": "c4"
}
|
End of preview. Expand
in Data Studio
No dataset card yet
- Downloads last month
- 9