output
stringlengths 1
8.55k
| input
stringlengths 189
11.8k
| options
null | task
stringclasses 1
value | setting
stringclasses 1
value | split
stringclasses 3
values | few_shot_example
null | instruction
stringclasses 5
values | __index_level_0__
int64 20
234k
|
|---|---|---|---|---|---|---|---|---|
It is Windows 8. As far as I know 8.1 is only available currently as a Beta. Also, I have read that if you install the Beta and have problems, there is no way to uninstall it without wiping the hard drive clean and reloading the entire Gateway load set and also any user software you added. I don't plan to try 8.1 until it is released. Also, go to Microsoft's site and take a look at the improvements in 8.1 Microsoft has mentioned, many of them have to do with Touch and other features that I am not much interested in for a desktop. So I am not holding my breath on 8.1, but I will try it when official, if I don't switch to Windows 7 first.
|
{"question": "what windows operating system is on this 8.1 or 8 RT?", "document": ["Computer is exactly what I was looking to buy as a replacement to a failing unit. I was not aware windows 8 is so different than windows 7. This new operating system is absolutely awful and not user friendly. I partitioned the hard drive to install windows 7 as a dual boot system. No luck in getting the install done. Beware windows 7 programs do not work very well with windows 8. Microsoft money 2007 will not work and is no longer supported by Microsoft. This computer should be excellent if windows 7 will install.", "HD quality but small fonts) with HDMI a senior person will have to sit within about 7 feet of the 52 inch TV to be able to read and navigate well.However, I have to ding the DX-4860 from 5.0 to 4.0 Stars due to the operating system. Windows 8 is a mess. I can't imagine why Microsoft or Gateway or anyone else would recommend Windows 8 for a desktop PC. If I had it to do over again, I would spend more time trying to find a Windows 7 PC.", "If you are running Windows 8 you need to do two things in the bios before installing the card:1. Disable UEFI secured boot2. Launch CSM - set this to Always (under boot options)Once you have done this you can install the card (make sure you connect power to the video card before powering the system on).Enjoy!", "Also, I was able to make Win8.1 usable by installing \"Classic Shell\", disabling all hot corners and setting things up to boot straight to the desktop, essentially ignoring and totally bypassing the Start Screen. Win8 and Win8.1 are really a detriment in my experience (and is why the PC market is stagnating for the past year), but with a lot of work I have been able to bypass them and have a functional Debian system dual-booting with Windows.", "Replaced a dual core system and am happy with this system. Windows 8 takes a bit to get used to but system works great and have had no issues in 2 weeks so far. Out of all the systems I have had this is my 3rd Gateway and like with my 3 E-Machines I have never had any issues with and have used all until they became to outdated, but the 3 Gateway's are still in use.Did not care for the bare bone keyboard and stuck it into a cabinet for when someone hits me up for one.", "(No speakers in my monitor. )-> Also, you can create your own system restore media by using a USB 2.0 thumb drive with at least 16 GB storage on it.In reflection on this, I was almost in despair trying to get past the opening interface of Windows 8 - but now it's okay - at least, usable. I was reluctant to get it, but everything keeps changing, so I figured I'd have to face it some day - and for the faster computer hardware that can use it now, I guess that's just the price one needs to be willing to pay, in frustration rather than dollars.I'm very glad to have this computer, and have learned to accept Windows 8 - after some hair-pulling and passing moments of despair.", "I do like the alt-f4 command that lets you close those darn Windows 8.1 open screens.Gateway did a nice job on providing many USB ports and some are actually conveniently located on the top and front. In addition they top of the tower has a \"tray\" where you can plug in USB devices for charging. A totally useless but none the less cool lighted logo rounds out a very solid, reasonably priced desktop.", "Love this machine.I Bought a new one about two months ago......replaced an old dual core Gateway desktop running XP. The learning curve from XP to Windows 8.0 took some time....actually still working on that......after 2-3 weeks MicroSoft put out an upgrade from Win 8.0 to Win 8.1 and that has some significant changes as well......but you know engineers and programmers....always screwing with stuff.I was somewhat concerned that the power supply that comes with this machine was only 300 watts......but that shouldn't be an issue for most users.", "I just picked up this computer (for free!!!) as a result of a class action settlement. It replaces my seven-year old Dell running Windows XP and Linux. This is a nice-looking computer with top-notch specs for a general purpose desktop (Intel i5 \"Ivy Bridge\" processor, 8 Gb memory, 1 terabyte 7200 rpm hard drive, 10 usb ports, memory card readers, etc.). I really like the up-front placement of 4 usb ports, 2 memory card readers, and a doo-dad to keep wires organized.BUT - after spending a few hours playing around Windows 8, this is the biggest drawback in my opinion and the reason why I give this computer only 3 stars.", "I even downloaded the Windows 8.1 preview and spent a couple of hours trying to configure everything, but at the end of the day I find it too damn annoying, with too many in-your-face apps and other tiles (icons) that distract and detract from usability.In order to actually do productive work on this box I will install linux (debian sid, with xfce) and maybe Windows 7. one good thing is that you can disable secure boot, which enables you to install something besides Windows 8. took a little digging to find out how: press [delete] as soon as the computer fires up to enter the bios setup, and there you are.in sum: this is a really nice general purpose desktop which unfortunately is crippled by Windows 8.UPDATE: I was able to disable Secure Boot as indicated in my initial review."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,556
|
My understanding is that it does NOT allow flow through charging.
|
{"question": "Can one be using one's mini iPad while charging it on the Satechi?", "document": ["I purchased the 10000 MaH Satechi pack for an upcoming international backpacking trip. My wife and I have 2 iPhone 5s and an iPad Mini that we have between the two of us. Since power outlets can be scarce when hopping from city to city, we needed something we could bring along to save us in a power pinch. I have successfully charged my iPhone 5 (from 0-100%) multiple times over while simultaneously charging my iPad Mini on a fully charged pack.I suppose that one downside is that only one of the two USB ports supports 2 amps, so power hungry devices (i.e.", "This is a pretty neat external battery pack. Easy to charge, using the mini USB tip on one side and a standard USB tip on the other.CABLE, TIPS, CHARGER, BAGIt comes with a charger, a cable, and some assorted tips that fit different devices. The soft-cloth drawstring bag holds the battery nicely, and it has a little side pocket to hold the small box containing the interchangeable charging tips. The bag's not big enough to pop the charger in with the other bits and pieces though.", "I'm very pleased with the product, like that the charging port is now a micro USB port instead of the old mini USB port allow me to carry only one cable, I've been able to charge two Galaxy Nexus at the same time with no issue, portable enough that it fits in my front or back pocket of my jeans, the weight of the product does not bother me when taking a 20-30 minute walk to local store. The only downside is that it does not perform well when using the mobile device while charging, I found that its best to not use the mobile device while charging and just let it charge for 20-30 minutes without use.", "We got the Satechi Portable Energy Station, Anker Astro3- both 10,000, and a MonoPrice External Battery Pack 5,000. iLounge rated the Satechi poorly "D+", and MonoPrice "B+". But I read some good review of the Satechi and decided to do my own tests.We just tried them out on a couple trips last week. We like the 8.4oz Satechi - we can use the iPad Apple 10w charger or iPhone charger using a regular USB to mini USB cable and it seems to work fine on iPhone5 and iPad3.", "I have replaced it with a 24 gauge cable. Also, when trying to charge my iPad 2, I was actually able to draw 50% more current via the 1 amp port using shorted data wires (USB fast/dumb charge mode) than I could using the 2 amp port. Actually, the 2 amp port in shorted mode caused the iPad and Satechi device to stop charging and go into standby mode. In any case, the iPad is able to draw significantly more current from a Verizon universal charger, so when I can only get .88 amps out of the 2 amp port using the highest quality cable, something is seriously wrong.", "After looking at a couple of the competing portable external battery products (Tekkeon, Mophie) and comparing and contrasting the price and capacity, decide to go with the Satechi.I took the Satechi on a business trip with my iPhone and iPad and put it through the paces. I charged both simultaneously after using them in meetings during the day and the Satechi performed as advertised, bringing them to full charge (with capacity to spare). One of the concerns I had about portable batteries after reading about some of the competition online was heat dissipation.", "I received the Satechi Portable Energy Station yesterday and plugged it in overnight to charge. On a single charge, it charged my iPad 2 from 59% to 100%, my iPhone from 43% to 100% and my wife's iPhone from 80% to 100%, one after the other. It still has 3 LED's lit up indicating that it has 40-60% of its charge left. I used the 2 amp port for the iPad and the 1 amp port for the iPhones and they charged as quickly as they do when using their own power adapters.It is a small, sleek-looking device that will be easy to include in our travel bag.", "I bought this battery and loved it while it worked. Unfortunately, after 3 months it stopped charging. No warning. One day it accepted a charge with zero problems, the next, nothing. I tried different mini usb chargers and outlets, all to no avail. When it worked, it nearly doubled the battery life. Too bad it didn't last.", "Excellent charger. I get 5-6 full charges on my iPhone before the Satechi needs to be recharged.Excellent device for commuters or others with hit/miss power access. Also one of the few chargersthat puts out 2A for iPad charging. Great price too!", "I have the 5200 charger for my iPhone, but needed one that could do my iPad as well so I went with this model as the 5200 has been perfect. The 10000 works great, is compact, and performs wonderfully. The only reason I gave it 4 stars instead of 5 was because I can't have the charger charging while my iPhone and iPad charging from the unit. I was able to do this with the 5200 model so assumed the 10000 could do it too; never saw anywhere that it couldn't. However, I still very highly recommend this and any Satechi product, it is quality and you won't be disappointed."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,580
|
filled full the grinder pre-grind holds 40-42 grams of beans.Ground it has a line for one and two cups. the 2 cup line of fresh ground beans makes a stout pot of coffee in the Mr Coffee 12 cup maker. in my Aero press oh la la. hope this helps.
|
{"question": "How many grams of ground coffee fit in the receptacle? I hear 50 grams is needed per cup for a 34 oz french press, so I was just wondering.", "document": ["Coffee is as complicated as you want it to be, but for me this is just fine. I brew about 12 oz of coffee per day and fill the Mini Mill to about 1.5. I do about "10 clicks" and the grind is uniform enough for me on a French Press. Some say it doesn't do a coarse grind evenly enough but I don't think it's that big of a deal. I think the finer side of coarse is better for flavor anyway.I might purchase the skerton or a Porlex if this one ever fails, just because the plastic is a little dinky.", "I don't need to make coffee for 50 people, I just have a small French Press. This grinder is perfect for that, about 15 grams of coffee at the coarsest setting into the French Press. Press down, minimal dust, and so much easier cleanup. This beats any blade grinder into the ground, and is about as expensive. So glad I picked this grinder up.", "Many reviews talked about how difficult the grind was but I found the grind to be pretty easy. I did use the grinder mostly on coarse setting for my french press so this made it easier but not once did I have any issues with the grinder malfunctining. If you want to grind more than a 22 oz french press then this might not be the best grinder (unless taking on backpacking trip) to get since I could only imagine how long you might be grinding on fine/med setting for a 12 cup coffee maker!", "I got this to take on car camping trips to make fresh ground coffee and not sacrifice taste. The \"mini mill\" has a nice consistent grind for my GSI french press and takes less than 1/2 time the water takes to boil to grind enough for two 12 oz cups. I think I'll put my blade grinder away and start using the Hario for home too.", "Great for single serving or small amounts of coffee. You can get about 30 grams or so of unground beans in the upper portion. The lower portion will not hold all 30 grams of that when ground. You can set it from fine to coarse although I have not tried a french press grind. Lack of instructions in english is amusing. Basically, use the little \"Y\" shaped, triangle shaped doo-dad on the bottom of the grinder (upper portion) to go from fine (turn clockwise) to coarse (turn counterclockwise).", "This thing is fantastic. It is light, easy to clean, grinds coffee better (more precisely) than any of the cheapo electric grinders I've had in the past, and fits well on my coffee "gear" shelf.I have only two quibbles with it. First, it is prone to static cling, so when I'm emptying the ground coffee into my french press, some of it sticks to the little reservoir and I end up snowing coffee onto the counter. Not a lot, just enough to be irritating.", "Once I bought a Freiling french press, I became a coffee snob. My coffee is ground fresh each morning and my morning mugfull is made immediately. However, I live in hurricane country. I needed a manual coffee grinder for use during blackouts and while traveling. I ordered another grinder from Amazon and had to return it (thank you Amazon for making that easy.) Size was important. I don't have much room in my suitcase or cupboard in which to store another coffee implement. This grinder is small but grinds my coffee just perfectly.", "I thought I'd throw in my two cents. I've been using this pretty much daily for about 4 months now, initially for french press and recently for the V60, and love it. The positives have been elaborated upon at length, so no need to repeat in detail the positives: easy to adjust coarseness/fineness, decently consistent grind though better on the finer end, easy to completely take apart and clean, and the size is perfect if you're only making a daily cup of coffee for one.Here is where I might add something new: I used the Mini Mill on a dark roast without any problem through my first 24 oz of beans.", "The reviews are right. This grinder is great for grinding coffee. I use it for my French Press and Bee House Coffee Dripper. It is great for those who want to grind coffee for the freshest cup possible. There are limitations though. I typically use this for myself. Two cups max or roughly 38 grams of coffee (which is the max the hopper will hold). I wouldn't think to use this if I'm entertaining or brewing more than two cups of coffee simply due to the time and effort involved.For two cups of coffee, the beans take about a minute to grind (100-200 turns) and is ready in about the time it takes to boil some water on the stove.", "This is a great little grinder, provided your needs are as follows:- You are the only regular coffee drinker in your household- You grind for one cup at a time- You want something quiet- You want something portable- You don't mind some effort to grind your coffeeI generally brew using the Aeropress and Clever Coffee Dripper, and this mill produces a nice drip grind suitable for either brew method. It produces a much more consistent grind than my old electric flat burr mill that I bought at a similar price several years ago.I grind about 16 grams of coffee per cup and I find that it takes about 2 minutes to grind enough beans."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,587
|
Probably, but you're probably better off with some 20# double sided tape. You don't want it all to come down.
|
{"question": "Do you think that they can be hung using extra strength velcro rather than screws? The screws would go through the top of the cabinet", "document": ["We have ordered 4 of these glass holders. They work well, but 2 out of the 4 were missing the screws needed for installation. Fortunately I keep extra hardware like this around, but if this was to go in a place where I wouldn't typically have the extra screws on hand that would be inconvenient.", "I built a bar cabinet and I use them to hang my glasses...easily put it up and it holds my glasses up well ...I love it..I would buy this again and again if I needed to..it's a good buy, Go for it.", "No splintering or other problems. The screws also were perfect and I had no problems on the install. I was able to solve an issue in 30 minutes that has bugged me for 10 years. I'm very happy. I may purchase more to use in another lower cabinet for the "every day" wine glasses. Also, delivery was super fast and everything was packaged great. Would definitely use this seller again.", "They work if you have the patience for fitting them. I think the metal ones already sized work better but if you have some odd sized glasses or just want the wood look this would work for you.", "The wooden wine glass racks were, for the most part, well made and finished. Some finish sanding and a final coat of urethane varnish completed the project. Mounting screws were included. My only complaint is that the maker would not ship by USPS to US territories where I live.", "this worked for me with some alterations - I did like that I could trim to fit my needs. I do think it would be helpfulto have some instructions for installation - how many inches between etc. This is 4 separate pieces that youmount. It's good to have options, but some tips would have been helpful. Note - I did order another.", "Came packaged well and in good shape. Mounted to the underside of my cabinet with ease.Very pleased with them. I think after seeing them my son is going to order some. Thankyou", "they were a little bit of a hassle to put up but once i got them up they looked really nice. I have them under my cabinets but beware if you have cheap cabinets then the end of the screw might come up inside of them. my cabinet bottoms are thinner then i thought and i had to get smaller screws for it.", "These are great and I recommend them. We mounted them on the underside of our cabinets and ended up painting them black so they go with our dark wood cabinets. The only thing that makes it a 4 star rather than a 5 star product in my opinion is that they needed some additional sanding on the interior "track" that the glasses slide in and out on in order to make them slide smoothly. The package includes four pieces that make two short glass holders, and are supposed to hold a total of six glasses (three glasses on each).", "Good price on this well made wooden rack. Inside bevel for bottoms of glasses is an extra quality point. Wood is clear grade"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,588
|
Yes, it has holes for a 100mm VESA mount.
|
{"question": "Does this monitor have VESA holes on back for wall mounting?", "document": ["I mean bad, real bad. They sound like airplane headphone speakers set to loud. The speakers blow big time. Other than that, this is a great monitor for a great price. I use the monitor for school work and some gaming so I do not need the super low refresh rate and super high contrast, so this monitor suits my needs. The stand is okay. It only tilts but the monitor does have VESA mounts to give you some mounting options.", "Easy plug and play. Accepts thunderbolt to displayport connection can easily be setup to use the Intel HD Gpu included on the Haswell Cpu. The whites are stunning! to get maximum resolution make sure to use either a DVI or displayport connection.After seeing movies and playing games in 2560x1440 yo can never go back to 1920x1200 or 1920x1440.We are now on 2nd generation 4k monitors, prices have fallen however all the ghosts are not out of the machine, take a look at the pages and pages of reviews for 4k monitors sounds like they are debating unified string theory!.", "This being said, if the mid range refresh rate or gargantuan size don't bother you that it is a fantastic monitor for an unbeatable price.", "Wow. This monitor is a great deal for $330 ($350-$20 coupon). Immediately played BF4 on it and it looks amazing. Did a quick dead pixel test and all was good. I do have some minor light bleed on the right side of the screen, but it doesn't bother me. I ended up turning the brightness down a bit as it was pretty bright, so I don't even notice it anymore. This monitor is an amazing deal. I do warn you, the speakers are horrible.", "It's definitely still matte, but it also reflects a bit more glare than my previous monitor. I can live with it, but be careful about how much direct sunlight hits the screen (you may want to reconfigure things).I'm not a big fan of the glossy plastic casing. It's not horrendous, but it makes the monitor look somewhat unprofessional. I guess Acer had to cut a few corners, and I guess that I can live with anything that doesn't compromise display quality.My one major complaint about this monitor is the cheap-o stand.", "This monitor is a great investment, and a good way to increase the amount of real estate on your desktop at 60Hz. While getting a good taste of higher definition and not dropping a couple of thousand bucks.I believe 2015 to be the right time to jump into consumer grade 4k.It has a displayport in and a displayport out for those of you interested in daisy chaining Thunderbolt devices. It's mountable, and packing was done smartly to protect the screen.The picture is great! breaktaking and stunning. This is a great price point to jump into a higher resolution monitor and save some money.", "Wow. Great deep and rich colors and picture. Tons of screen real estate. Totally worth the price and the price was awesome.The only downside is that I run it in dual monitor with an old Acer AL2223W, and side by side the old Acer doesn't look too good. I might have to buy a second K272HUL.One tip, when I first installed it the text was garbled. Reading on a forum I learned that older DVI cables will not work correctly. So I switched out my old DVI cable for the one included, and now it's working perfectly.", "This monitor is outstanding in terms of picture. Details are sharp and color and contrast are stunning. This makes for a great display for photo editing and movie viewing. However, if you're considering this monitor for gaming there are some small drawbacks. The build in speakers are abysmal at best and the refresh rate maxes out at 60hz. While this is ok for most casual gamers some of the more hardcore enthusiasts will want a little more speed, though there could be some over clocking potential. The sheer size is also another thing to consider, 27 inches is a lot of real estate to keep track of and if you're really trying to concentrate on a game it can be a little too overwhelming, this is just my opinion though.", "Every other IPS-type display I've seen has a stand that offers height adjustment (and probably rotation, although I don't care much about that one). The stand on this is fixed in place, and puts the monitor several inches lower than it needs to be. On a cheap display, who cares, but on a nice panel, you want it to be in the right position. Sure, you can prop it up on a couple reams of paper or a box, but I'm sure it wouldn't cost that much for Acer to give this a real stand.I ended up buying this desk mount (http://www.amazon.com/gp/product/B00AIWFNUW/ref=oh_details_o00_s00_i00?ie=UTF8&psc;=1) off of Amazon, and now everything is great.", "The display itself is pretty amazing for the price. I'm a developer and this certainly will help my productivity (seeing more applications at once). Literally the only thing I don't like is the base. It's a little wobbly but it was easy enough to fix by inserting padding between the base plate.Acer is a winner here."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 187,591
|
Yes, it will make a difference. Jumping from f4 to f2.8 will help you mainly in one of two ways depending on the nature of your shoot. Either you will be able to drop your ISO to reduce the noise that comes with low-light/high-ISO photography, or you will be able to use a faster shutter to reduce motion blur. That being said, this lens will HELP these problems, but not necessarily eliminate them. It's up to you to decide if the difference is great enough to merit the price. I would suggest renting it or borrowing it to see for yourself. Good luck!
|
{"question": "Will this lens be a great difference than the 17-40 f/4 for city night and indoor photography? Im using a 6D.", "document": ["I am not a professional photographer, but I like to take high quality pictures of my family etc. I have a Canon 40D camera, and to date I have been mostly using the Canon EF 28-135mm f/3.5-5.6 IS USM. Having just started to use these lens (EF 16-35), I am amazed by what I have been missing. Photography is all about capturing light, and these lens make a huge difference in terms of being able to take great indoor photos without a flash, you have to see it to believe it.", "I had been contemplating which wide angle zoom to buy for some time now, I photograph weddings occasionally and need it for indoor shots as well as for street photography. I had had the kit wide angle zoom once in weddings and the pictures were substandard. The 17-40 4.0 is cheaper for sure but I decided this lens will be in heavy use for years, probably decades, so why not go for the big Kahuna. It was worth every dollar. Picture quality is as good as one can wish for, even in extreme wide end and all the way opened to 2.8!", "The Canon EF 16-35mm f/2.8 L II USM Lens is perfect for the wide work outdoor landscape photography, indoor events such as stage work, parties, wedding and for other photojournalism needs.I spent months researching this lens. I debate between the cheaper 17-40L and the 16-35mm 2.8 II lenses. There is a big difference in price between the lenses. In the end, I felt that having the extra stop of light and wider angle was more important than saving a few dollars.", "Images quite grainy at low light (compared to my 24-105 L at the same ISO)4. Expensive, twice as much as 17-40 but does not offer much benefit.5. Having problem lock on the focus with outer focus points at low contrast area, with my Canon 6D full frame camera.Final words: if you want to get the benefits of 28mm, 35mm, 40mm and 50mm f2.8 benefit, the lens to get is the 24-70 f 2.8, not this ultrawide lens.", "The Canon E-82mm front snap-on lens cap will fit on this filter. Canon's instruction manual recommends the installation of a filter to complete the weather resistance of the lens. So, the Heliopan has not added any ghosting (yet) to night time images.At f/2.8, images in the viewfinder are bright, the autofocus is quick, and like the 17-40/4 the lens is mostly flare resistant. At 100% zoom in Canon's DPP, the images are class leading sharp at all focal lengths.", "When compared to it's little brother, the 17-40mm f/4L, this thing is a beast! Even on a 1.6x sensor (7D) camera you get an astounding perspective. I can pretty much stand at the corner of a room and more than 80% of it in view. Great for indoor shots because you don't have to stand back to get the shot. And the wide 2.8 aperture is definitely more forgiving than the 4 provided by the 17-40mm, especially in low light conditions.", "I am a wedding photographer with a extensive resume of weddings. I own a good bit of L glass that Canon makes and use them on a pair of Canon 5D's & a C100 Cinema camera.16-35 is a great sharp lens with a nice low light f/stop. I find myself never using my 17-40 LENS now. If you want that dramatic wide shot this is it. If you need to get a wider shot for your CROP sensor Cinema Camera, this is the solution.I rate this lens with 5 stars and is work every penny.", "I'm a big fan of landscape photography and creating sunstars3) obviously, a stop faster, allowing for shots at night or indoors that otherwise would be impossible handheld4) 1mm on the wide spectrum is far more useful than 5mm on the long end.That said, it's highly arguable if it's worth paying twice as much for a very similar lens. For my needs, there was no question which lens belonged in my kit, but sometimes regret paying so much for it. The 17-40 is a much better value for the $, unless you absolutely need the widest, fastest, zoom lens in canon's lineup (as of march 2011).As much praise as I have for this lens, there are two things that fall short for me:1) Chromatic Aberation.", "indoor cathedral, candle light @ 16mm, hand held, 1/4sec).I don't have any experience using the mkI, but I have traded my 16-35 II with a co-workers 17-40 for a few weeks and made the the following observations (on full frame):1) wide open, noticeably better performance in the corners on the 16-35 (all focal lengths), just a hair sharper in the center.2) sunstars are far more pleasant on the 16-35, and not as clearly defined on the 17-40 (even at f16).", "I was debating between the cheaper 17-40L and the 16-35mm 2.8 II lenses. There is a significant difference in price between the lenses. In the end, I felt that having the extra stop of light was more important than saving a few dollars. After receiving the lense, I have been nothing be astounded by the quality of photos taken with this lens. Lens build and Image Quality are top notch. While I've seen the 17-40 produce high quality pictures, I wasn't about to sacrificy the F2.8 over the F4.For those not needing the extra stop of light and plan to do outdoor landscape photography, the 17-40 will work just as well."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 187,615
|
Yes it will block more than one outlet... It's a big plug-in power supply.
|
{"question": "Is the power supply a power brick or a wall wart? Does it only block the outlet in use when plugged in or does it block other power strip outlets?", "document": ["For example, to max out the unit, I connected 7 external hard drives to it (2WD Elements 2 TB USB 2.0 Desktop External Hard Drive, 4 Western Digital Passport Drives and 1TOSHIBA 1TB Backup Portable Hard Drive USB 3.0&2.0) and a camera, plus my Nexus 7 (for charging). Read/write speed is just as I would expect, if I plugged each respective device directly into my computer.What's in the box:-One (1) 3.0 USB to USB connection Cable (3 ft. lenth)-One (1) 5V/5AMP power Adaptor (over 5 ft. length cable)-One (1) double sticky adhesive strip for use in securing to the side of a desk, a wall or even your computer-The 10 port hubThe Satechi 10-Port USB 3.0 Hub is a fantastic product.", "What's amazing about this USB 3.0 hub is that I have plugged into it three 1TB portable hard drives, plus my iPad, plus my iPhone and it powers and charges all of them - no problem. Bet hub ever. Most simply don't provide the juice necessary to run multiple devices at the same time. In fact, we are now putting these at each desk in our office and tossing the old ones. This is a powered hub - meaning you should plug it's power brick into an outlet.", "That's because when you don't lose any, there's not a lot to say. But power comes at a price. You don't get a tiny power supply that will fit on a power strip without taking up much space. But this one is so efficient that it doesn't get hot to the touch. Neither does the hub itself. It's well built with an attractive case, has lights to indicate which ports are active, the ports themselves are illuminated, and each bank of three ports has its own power switch. The hub itself is efficient enough that I can't see turning off a bank to save power at the hub, but it does give more control over devices plugged into it.If I had to make one change, it would be to have a power cord and plug for the power supply.", "Big pluses are the control that the switches give you, the LED lighting and in-use indicators (there's an indicator for each of the 9 data ports), and the beefy power supply.It also includes a 3M adhesive strip if you wanted to adhere the hub to a desk or something, but I didn't want to permanently attach it to anything.Finally, it has a 1 year warranty.If you want something smaller and with fewer ports, then I recommend this hub which I use with my notebook:HooToo HT-UH002 USB 3.0 4 Port HUBShould I encounter a problem with the hub or anything else change then I'll update this review, but as of now this is my favorite USB 3.0 hub with more than 4 ports, so 5 stars.", "It is space-saving and compact, with a shiny piano black finish reminiscent of Playstation 2 accessories. I like that it is shaped like a surge protector. It makes all the ports easy to access, unlike my DomeHub which has the ports in the rear. The included 3M double-sided sticky tape lets you secure the hub to a desk or wall. It would've been great to have nail holes in the back too like my power strip does, for mounting on the wall via nails or screws.There are only 2 small considerations: the 4th switch for the side iPad port, is a tiny little nib that you slide.", "I know that for some users, the extra clutter would make matters worse, and if you have a squid type power outlet device, then the last thing you'd need is one more wire. So I won't take away a star for something that's a minor inconvenience for some but an advantage for others. If you do need to worry about outlets, I'd suggest changing power strips rather than compromising on your USB hub, because getting the wrong hub could turn out to be a bigger problem.Disclaimer: Satechi sent this to me as a sample, but I had no obligation to review it.", "Other items plugged into the hub--my USB music keyboards and audio interfaces--work very well, and the speeds have seemed good and the power supply is robust. The ability to turn on and off banks of three ports at a time is also convenient.", "This seemed like a very good (and less expensive) alternative to the Thunderbolt hubs that are here or forthcoming. After installing it under my desk with the included adhesive strip, I plugged in the unit and attached several things: my keyboard, a monitor-based card reader, a network connection (with adapter) and a single external hard drive. Everything else worked fine except that the hard drive won't mount. If the drive is plugged in directly, it mounts. If I use the Belkin hub, it mounts.", "These are unique features, not readily available on most competing products.The Satechi 10-Port hub has a power supply rated at 5 amps (5000mA), which is the highest power output I have found among the many hubs currently on the market. This product is a necessity for charging your devices, and syncing them with your computer at the same time. While testing the unit, I was able to use all nine USB 3.0 ports at the same time, recognized by my computer; and the 10th charging port for use with a tablet with no slow down in speed or capacity to power.", "This is an impressive USB 3.0 hub. It looks \"slick\" and is well designed.It has 3 sets of 3 fast USB 3.0 ports, and each set of 3 ports can be independently controlled by a switch on the hub. When the ports are switched on, they're lit up blue. It's a pretty useful idea when you don't want to have everything active at one time. It's a lot easier (and less wear and tear) to use the switches than to unplug and replug the USB devices.It comes with a beefy power supply, so I have little doubt this device can handle more than a few power-hungry USB devices."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,668
|
If it has the slot for an external flash it should fit just fine.
|
{"question": "Will this difuser work with the Pentax K-x digital camera? Thanks!", "document": ["So far the bracket is holding up just fine and it fits into my hot shoe without any issues. I have also seen it work on the Pentax K-X, but can't really speak for other camera makes / models.", "This isn't a product that is going to work miracles by any means, but what it will do is make that pop up flash much more usable. I attached it to my Pentax K-7 without issue and the results were immediate and pleasing. It will make skin tones warmer, soften shadows, and reduce the chance of blowing out highlights. In many cases I find that I need a higher (bracketed) flash for shooting events, and it won't replace that, but for casual shooting I've found it to be great.", "Given the limited effectiveness of the original I wish I had tried the Opteka knock-off first at less than half the price for more options.Opteka Soft Pop-Up SLR Flash Diffuser for Canon EOS, Nikon, Olympus, & Pentax On-Camera Flashes with White, Blue (Cooling), & Orange (Warming) Screens", "When I first saw the Puffer I knew I wanted to have it. However, my old digital camera (Panasonic Lumix DMC-FZ28) did not have a hot shoe mount to use the Puffer with. Once I got my Canon T3i, this was the first accessory I bought. While saving up for a good professional hot-shoe flash, I'm using the pop-up flash and the Puffer makes my photos look amazing.", "I just got this for use on a new Pentax K200d. It fits fine and softens harsh flash effects at close range. It doesn't seem flimsy to me, but as a previous reviewer stated it's only plastic. Mine fits tight in the hotshoe, but seems to be loosening up a little with use. I simply insert it in the 'shoe until it's snug and not necessarily all the way in.My only criticism so far is since it's fairly rigid it's a little inconvenient to carry in a small bag. It does fit in a shirt pocket while not on camera.Highly recommended for improving the camera's popup flash effect.", "This diffuser fits right on to my camera (PENTAX K-5 II) easily, creates beautiful soft light shots. I don't understand why people have said the plastic is cheap on it? The entire product is strong, sturdy and easy to take apart and store. You will have to get a little closer in portrait shots for the right amount of diffused light. Practicing with how close you need to be and which lenses you are using will help solve any issues you have with the diffuser.", "Bc it IS useful to soften flash in your average snapshot. It's great for when you need a fill flash but you know it will be too close and harsh. Use it selectively, and you may find you really like it, as I do. And DON'T use it as an excuse to shoot with flash \"on\" all the time; I don't imagine you'll be happy with the results of that. There ARE generic version out there; I wasn't aware of them when I bought this. There are also other types of cheap/inexpensive/portable diffusers (like this:Opteka Universal Soft Screen Flash Diffuser for Canon, Nikon, Pentax, Olympus, & Kodak On-Camera Pop-Up Flashes) that you can try.", "When I need flash I use the Puffer but at the same time I really wish I had a faster lens instead.If you're looking for a pop up flash diffuser you might want to check out the one sold on ebay too. Search for \"Soft Box For On board Flash\". Also called the \"Shoestring Studio OnBoard Flash Diffuser\". It works a bit differently but I think it might have better results. The trade off is a less convenient attachment method. I might give it a try next.EDIT: It looks like the diffuser I was talking about is now available on Amazon too.Flash Softbox Diffuser for Digital or Film Camera Photography Fits on Board Flash", "so glad I bought this!!! My external flash gets overheated a lot and I have to use the pop up and this is just wonderful thanks!", "It doesn't work on my Canon EOS 1100D camera, because the build-in flash don't work if something attached in the hot shoe."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 187,673
|
Yes, it is compatible. I've got it plugged in continuously.
|
{"question": "Is this mini charger/adapter compatible with the Ambient Weather WR-090 Emergency Pocket AM/FM/WB Weather Alert Radio?", "document": ["Works well...however, warm to touch after a short while, Works well with the Ambient Weather WR-111B Emergency Solar Hand Crank AM/FM/NOAA Digital Radio, Flashlight, Cell Phone Charger with NOAA Certified Weather Alert & Cables", "This charger does the job in minimal time. I highly recommend it for a quick charge to the Ambient Weather WR-333 Emergency Solar Hand Crank Weather Alert Radio, Flashlight, Smart Phone Charger.", "Portable emergency radios are a good thing for those times when they're needed in a crisis, but why do they have to be reserved for just emergencies?Bought thisAmbient Weather WR-AC1 Mini-USB to AC Adapter for Small Electronic Deviceswhen I decided that my emergency radio was worthy of keeping on the desktop for simple FM background music. It's true that myAmbient Weather WR-111B Emergency Digital Radiocame with the USB adapter, and that does fine when plugged into my PC or into one of the USB to AC adapters that so many of us have to power various devices.", "But there are times that those are in use, so instead of unplugging and re-plugging, this AC adapter is a good solution.This AC adapter will power a number of different Ambient Weather devices as listed on the product page. It's also the same one that comes standard with the highly-ratedAmbient Weather WR-334-U Emergency Weather Radio, which frankly influenced my decision to get it here.TheAmbient Weather WR-AC1 Mini-USB to AC Adapteris a good one. It's highly recommended as it offers full-time power plus recharging.4/28/2013", "Ambient Weather WR-AC1 Mini-USB to AC Adaptor for Small Electronic Devices serves its purpose well would buy again if needed", "The mini charger makes it easy to use the emergency radio as an every day radio. No need to crank the radio or use the solar option.", "Personally I feel as though this item should have been included with the Ambient Weather radio but since it was not, I felt that it was important enough to have it. It is an adapter - it does the job and I think if you purchase the emergency radio, this is a must have.", "Item was quality and arrived in perfect condition. No problem with shipping or packaging. Radio and charger works great. Just tested with a Pacific winter storm. NWS weather alert alarm used several times. Happy with my order.", "A must have for your ambient radio. for around the house to keep it charged for emergency purpose. I have 2 radios and 1 adapter.", "the product that it was made for: Ambient Weather WR-111B weather radio. . . . . . . . ."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 187,693
|
full size, no dual controls
|
{"question": "What is the size of this blanket and does it have dual controls ?", "document": ["I paid Amazon $31.94 for this 3 years ago. Whoever is charging $299 now is RIPPING PEOPLE OFF!! Absolutely outrageous. At the Sunbeam web site, the most expensive electric blanket they sell is a King size one for $179. Twins are at very, very most $119 and as low as $69. So even direct from dealer (more expensive than Amazon plus shipping and tax) you pay $230 less than this joker is asking.Anyway ... Works as advertised. I've been using 3 years during cooler months in coastal Central CA - October-March more or less.", "This is wonderful for the price. Only needed a twin, so my dogs wouldn't lie on a larger size. Don't care about the fabric quality, if you want that pay a higher price, this does the job in keeping me warm.", "I bought it for my wife and it works wonderfully to keep her warm either on a sofa or to warm up our bed before we go to sleep. It's sufficiently big for a full size bed and comfortably allows to people to snuggle up in it. It is ideal for cold places or when you want to save a bit on energy, while not sacrificing the comfort of warmth.", "This blanket is not Soft at all it is very uncomfortable to sleep under. What happened to the soft thick heated blankets? M", "Not a bad blanket, but it is cheaply made...not like the heated blankets in the past! Does not get very warm, however.", "the fabric of the blanket was very cheap... it would actually fall off onto my clothes and sheets... it warmed well though =) and i had to return it because i found it at walmart for half the price.", "Got this product a month ago, this is one of the best purchases I've made this winter. The heated blanket works great and has helped us lower the electricity bill.", "I brought this blanket for my daughter. So likes that fact that the blanket warms up quickly and stays warm once you turn it off as long as you don't move the blanket around. She uses it in her room in the basement to sit on while doing her homework or reading and in the morning getting up out of bed.", "Sunbeam Channeled Microplush Heated Electric Blanket Twin Dusty BlueVery nice,pretty,good color's..A good buy at the price..Would be nice if it came in Full/Queen and King..I would tell people to buy this if they wanta Twin...", "I purchased this electric blanket for my elderly mother who was cold all of the time. It worked nicely for about 6 weeks but appears to have a shortage in the thermostat control. I have read the manual and it's just not working right. Its been over 30 days, so I can't send it back and now I'm stuck with a bad product!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,697
|
There is weight to it, however, there is nothing as far as grip goes on the bottom to keep it from sliding.
|
{"question": "i am aware it is plastic... does it have weight to it, or will a simple flick of the finger send it flying?", "document": ["This is cheap plastic. DO NOT BUY THIS! Some of the reviews say that it looks like porcelain. Are those people being paid by the manufacturer? It's a piece of plastic that is light weight and hardly stays in place. I feel duped, and on principle I am taking the time and effort to send it back.", "You won’t need another soap dish after you get this one! It’s plastic, simple to use and “install”. And you’ll never have to waste another bar of soap because it’s turned into gloopy gunk. It drains the water off well and holds the soap bar well in place. Can’t complain at all.", "Always wanted a waterfall soap saver so water won't waste my soap, this does its job. Plain and simple. It's made of plastic but it doesn't look that cheap. (Well, it will be way cooler if it has a more modern design.) Your guests won't be able to tell it's made of plastic until they lift it up on purpose. You still have to clean the gunk once a while but it's not as bad as water swamped soap.", "Bigger than expected better than expected. Sturdy construction. I use expensive soap and dont want it wasted so this really fills the bill. Someone said they got something different. Mine is all one piece of plastic and you put at the edge of the sink... in my case I have molded seating areas in the shower and I put it there... water drips off rapidly, preserves the soap.Simple but efficient.", "If this were from porcelain it would be a awesome soap dish. The design/shape is spot on. Unfortunately it is white plastic and so light weight that it is easily tipped over.", "Such a simple product that works well. Keeps soap from becoming a disgusting, slimy mess. I use the plain, large Ivory soap bars. I bought these 6 months ago when I had old, not so nice looking sinks and recently had bathrooms remodeled with white cultured marble sink tops--the soap savers fit right in. These soap holders look nicer than they really should, being plastic and all. They are heavy duty. Clean easily right at the sink under running warm water--no need to put them in the dishwasher.", "It's funny because personally I would have never thought of making something so simple yet work exactly as described. First of all the build quality is nice, smooth and clean plastic build with no sharp edges that fits almost any sink size. My sink top is a bit smaller than most but the dish fits good, the base hangs a bit off the edge but with the design of the waterfall slide you can't see it because the slide blocks the view of the base. Second, you can use this with soap bars, sponges, pot scrubbers, whatever can fit on the dish.", "It looks ceramic, doesn't it? It's not. It's medium weight plastic. So, that's not impressive. The base is round (and plastic) and fairly big. So big, in fact, that it would not fit on the edge of my sink (which is only 2.5\" wide). This base is about 3.5\" so be sure to measure. So, it's basically useless to me. It's a clever idea if a little creepy looking, I think. In ceramic (for more money, of course) it would be heaver and slide around a lot less.", "The picture makes this item look like a ceramic. Instead, it is an extremely light-weight plastic. That wouldn't be a problem except for the fact that since I put it next to my bath tub, it is always sliding and making loud noises when I am trying to use the soap.The good part is that this does keep the soap very dry, and it fits very large bars of soap too which is the size that I use. Also, since the soap is resting at an angle, this may or may not be odd ... depending on how you access your soap.", "That's BS ,,, what does she want an anvil? In fact it is made of sturdy plastic ,,, and adequately heavy in weight. Has a large base, footprint. Will not tip over or fall into basin.It moves along the edge effortlessly (when repositioning) with no threat of falling over.The design is EXCELLENT. He should have received an award. A must buy at this price.Soap in your eyes(?) It is easy to locate with its two nipples sticking up. And it easily slides along the basin edge when repositioning is required ,,, guiding itself ,,, not falling into the basin ,,, using its \"lip\" which hangs over the edge."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 187,749
|
Hi, the one I have measures at 67 inches long. Hope that helps.
|
{"question": "What is the length of the cord on this warmer? I purchased a warmer locally & returned it due to the cord only being 18 inches long.", "document": ["I like it. The cord is plenty long enough so that I don't have to use an extension cord or sit within 18 inches of an outlet. (cord really truly is 5 feet long) I did put mine on a outlet timer to ensure that the thing isn't left on at night however due to accidently finding it on a few mornings. The light is not bright when it is on. This thing gets hot enough to sizzle water drops that land on it after it's been on a while. My adventurous male cat learned very quickly not to ever walk on this thing again.", "I'll start with some specs since Amazon isn't always good at providing them. The cord length is about 68 inches. The flat surface for the mug is 3 5/16\". The switch and indicator are on the base (not the cord). The watt rating listed on the warmer is 17 watts, although my Kill-a-watt meter shows it drawing 12-14 watts, depending on the line voltage. There are less expensive units for sale here, but I chose the Mr. Coffee unit because of the longer cord length and the switch and indicator on the warmer rather than the cord like some models.", "The heating surface of the Mr. Coffee is 3 3/8\". Overall dimensions: 5 3/8 inches front to back, 5 inches width. Cord length is 5 feet 6 inches. It has a simple, sliding on-off switch and an orange on-indicator light.Heat transfer from the heating surface to the fluid depends on how much contact between heater and container there is and a flat-bottomed glass or cup is best. For this review I used a Bormioli Rocco Bodega Tempered Glass Tumbler (ASIN B000PGB9PE) which has a flat bottom and holds 12 oz of fluid filled to 1/2 inch from the top rim.", "I have yet to read a review for one of these types of coffee cup warmers that stated it keeps hot beverages hot.I bought this unit due to it's cord length and the fact it plugs into the wall, rather than a USB port. Most of the reviews on other units said the cord was either too short or the USB power was insufficient to keep the beverage warm.With that said, this unit will not keep a full cup of coffee hot. It will keep it warm. Half empty it will be better and a quarter full it gets nice and hot.I even bought a few 2-inch, steel washers to put on the plate.", "I purchased the Mr. Coffee mug warmer because it was economical and I believed Mr. Coffee to be a reputable brand.Don't waste your money on this mug warmer, even if it's economical. There are good points -- nice length to the cord; convenient on/off switch. But the reason for purchasing a mug warmer is to keep the contents warm, even somewhat heated. This warmer does not do that. It barely keeps the coffee lukewarm. I previously had a warmer by Continental Electric which kept the coffee at a very nice temperature and it was never cooled to the \"tepid\" point.This model is not worth the money or effort.", "I have looked around locally for a mug warmer but could not find one until I went online to Amazon. This is a very nice outfit for the money. Has long enough cord; and it is wide enough for the big mugs. It keeps the coffee, tea, cider hot until it is all gone. My wife is very pleased with it.", "For those who like measurements. Mr. Coffee mug warmer purchased in Jan. 2014 has a 5.5 ft cord length, 3.25 inch maximum diameter heating surface. This allows for a regular mug (3 inch) but not the larger soup mugs (3.5 inch+), although the box says it is for heating soups. The unit is rated at 17 watts heating capacity.For the surface temperature heat up rate of the mug warmer, I used a laser/IR thermometer. The following readings are minute/degree F temp.", "Mr. Coffee mug warmer: As I use it, I will update this review. Cord is long (3.5 feet), the actual heating surface is 3 and 3/8 inches diameter, and it's well made and inexpensive. It turns on with a red light on the unit (unlike another brand that has the on/off switch on the AC electric cable). A superb substitute for schlepping my soups in with a thermos every day (hard to clean, extra work at home, etc. )My goal: warm soup at my desk.", "After years of bouncing up and down to the microwave to rewarm my coffee I am so excited about this little warmer. It works great and keeps my coffee warm all the way to the bottom of the cup no matter how long it takes me to drink it. I dont know how I lived without it for so many years. One thing is for sure, if this one ever gives out I will certainly buy another. The cord is the perfect length also.", "Amazon was the seller. I got one for myself for work, and another one for a gift for someone else. The cord is plenty long. The on/off switch is on the unit (right where it should be), and the little red light is handy to confirm that is \"on\".The diameter of the heating pad itself is 3-3/8 inches from inside edge to inside edge. Other people have measured 3.6 inches, but that is from the outer edge to outer edge (i.e., the edge is beveled)."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 187,761
|
Hi, I've tried and compare the 67mm adaptor from canon. But the filter will be cheaper if u get 58mm compare with the same filter with 67mm. The adaptor is a kind if like twist and lock to the lens mounting just like mount a hood. It does not affect the lens retraction. The 58mm and 67mm are actually referring to front side of the adaptor where u CDMA fit in the filter. The other end where u twist and lock to the lens mounting, both type are the same size.
|
{"question": "Is the 58 mm filter adapter better than 67 mm adapter for the Canon PowerShot SX series camera? How can the different ring shaped filter, 58 and 67 mm be screwed onto the same lens? Which adapter may affect the lens retraction?", "document": ["Excellent fit and finish for the Cannon SX30IS.I had purchased some 58 mm filters and an adapter elsewhere that were supposed to fit the Canon PowerShot SX line, but found that there is a slight change in the threading on the SX30IS from the earlier models. This adapter fits like a glove whereas the other fit more like the infamous OJ glove (almost, but too tight to really go on). The 58mm lenses easily mate up which makes this item essential for anyone who wants to get the most out of there SX30IS without paying 4X as much for the OEM adapter.", "Item arrived earlier than expected and performed as described on my SX50. A little snug to get on (after getting the slots lined up correctly), but that's better than loose. Camera lens closes normally and old lens caps fits fine with it on, so I'll leave it on permanently. I used a 58 to 52 step down ring to try a old Olympus C-180 teleconverter (1.7X and very light weight) on the camera, but the resulting images, while blown-up appropriately, contained no additional detail, so I'll only be using this adapter with normal filters.", "I do sometimes use UV and polarizing filters with my digital cameras. In order to use the filters with the Canon SX40, it is necessary to have an adapter ring so I purchased the 58mm lens conversion adapter ring from Digital Goja. The adapter ring is metal, not plastic and very easily twists onto the camera. It fits snugly and does not wobble and the filters thread onto the adapter ring very snugly. I am quite pleased with the quality of this adapter ring and would recommend it to others.", "I already had 58mm filters from other cameras, so thought the product was worth a try given the price. Worked perfectly with the Canon SX40--screws on and off very easily. Well threaded to receive and remove the filters. Feels surprisingly sturdy. A warning, however: I've since bought the SX50, and it's a significantly tighter fit on that camera. Much harder to get on and off. You have to zoom the lens out and hold onto its barrel while you're putting on the adapter to make sure you don't put torque on the lens itself when you twist the adapter ring.", "Works great with my new Canon Powershot 40SX. I use it to place a filter on my camera lens to keep the lens from getting damaged. :)", "This lens conversion adapter ring fit perfectly onto our SX30is. We can now use the 58mm polarizer with this camera. Item is as described and shipping was super fast.", "Good quality and price. Slips onto the SX50 to provide 58mm threads so I may use my Digital Rebel lenses and accessories on this camera.", "Despite what other reviews may say, it is not hard to fit on the lens and takes filters well. I bought 2 in order to keep them on my grad nd and circ. polar. filters all the time. It is minor that it does take some effort to remove a variable ring filter from the ring adapter.", "fit my SX40 camera like a dream, was able to attach a UV filter on adapter with no problem. Takes a little effort to remove and install but this is fine since it will stay locked in place when installing lens cap and when you are removing camera from bag. 58mm size keep it close to same size as lens housing and makes it much better to handle.", "Ordered this adapter after a different seller sent one that didn't fit. This one fits. It appears to be well made. It could stand to be a little more snug, but it does the trick and holds filters in front of the lens. Be careful to hold the adapter ring while unscrewing filters so that the ring doesnt come off the camera. Repeated installation and removal could eventually cause wear on the lens and make it fit more loosely."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,801
|
The stereo channels are combined. Hope this helps.
|
{"question": "does it stereo combined or do you only get one channel?", "document": ["Until I screwed up and bought this garbage one earpiece \"thing\", I never knew they existed. Yea, it's my fault for not reading the details but I assumed all earbuds were 2 piece stereo. A single earbud is a stupid idea as far as I'm concerned. I'll be more careful next time I order. There are some really idiotic products out there and this is one of them. Won't be buying from Jlabs again.", "I usually wear one earphone during work so I can still hear what's going on around me. The problem with stereo is that you loose a lot of the music when only one earphone is in place. This eliminates that problem completely. The sound quality is good, but my stereo pair is a Klipsch, which sounds phenomenal. The cord is thick and sturdy, overall good quality. I have yet to utilize the microphone.", "This is a fantastic product! I am deaf in one ear and have been trying all kinds of single ear buds to listen to audio books and music while waling and bicycling (yes, I am one of those people). Most of the experiments have failed with a couple of mediocre exceptions. However, the J4MS rocks! I have to turn down the volume, and quite a bit at that, on my Android phone it is so stereo sound efficient. Also, the J4MS comes with a wide assortment of ear bud fittings.", "Great one ear headphones. Nice to have the microphone on there in case you get a call while listening to music. I would purchase them again.", "i have always had regular ear phones and always have to have one out of my ear while driving or whatever i was doing, just to hear what was happening around me. i saw this and tried it, and i must tell guys its been perfect for me. works really well. get this if you are someone who like to talk, listen to music and still hear and know what is around you. RECOMMENDED ! !", "Bought these as I needed a headset I could throw into my laptop bag and use while at work for teleconferences. They do a great job with sound quality, they are built solidly and do not get tangled even when they end up buried in my bag. The only reason I did not give the 5 stars is because they do not come with a clip so the microphone stays in one place, otherwise I highly recommend them.", "!.#3 I listen to my music while I play tournament poker - again I can still hear what's going on around me. Music sounds great. I would not have expected it out of a single ear bud, but it does sound like stereo.Really enjoying my music with these and appreciate the safety factor.", "I'm a cyclist.I wanted a single bud headphone so I don't miss road sounds, etc and these definitely fit the bill.GOOD POINTSSingle ear budGood stereo soundEasy pause and skip functionLong cordHeavy duty cordNon tangle cordBAD POINTSDon't even want to put anything on here because I love the bud but....If you plan to use this ear bud with your phone, the microphone isn't heard well by the person on the other end of the line.LOVE THIS PRODUCT>Highly Recommend", "I love this in-ear single earphone. The sound quality is WAY better than any bluetooth devise. And because it is not a double earphone, the wires hardly get tangled.", "I have to admit it, I'm really hard on ear buds; I have killed so many in the last few years I couldn't even begin to count. I started buyingSamsung Galaxy Tab Hands Free 3.5mm Stereo Headset - Black (EHS60ANNBEGST1)5 at a time, which sound good enough and are inexpensive but I was just burning through them.So I went looking for rugged ear buds and figured this was just the thing. Unfortunately it died just a little over 4 weeks from the original purchase, which is the end of the Amazon warranty period."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 187,826
|
Yes all ford's from 2000 to 2009 have the same radio hookups.
|
{"question": "Will this work for a 2002 Ford Mustang w/ Mach 1000?", "document": ["amazon says that it dont fit in a 2002 mustang gt but it does just depands on what stereo u had in it. there is 2clip wires and a 3clips wires mine has 3 clips so it works real easy to hook up i just bought my 2002 ford mustang gtand it had a 2 clip radio in it wich comes out of a non mach car i was tring to figure out where the third clip goes but then i realized it was the wrong stereo so i got these clips and hooked up my pioneer stereo in 10 mins awsome buy great product dont wait just buy them there awsome", "I could not find this anywhere. All of the wiring guides don't mention the 2000 Ford Explorer w/ premium sound. This worked perfectly. The wiring diagram that was supposed to be printed on the package was missing, but each color just matches up. No surprises.", "Worked absolutely perfectly in my 2003 Ford Explorer Limited! This wire harness enabled me to KEEP the awesome Mach1 system in tact, while enabling my 1000 watt amp to power my added 12" Subwoofers. Sounds fantastic! !", "At the end of the installation everything didn't seem to work but it did get my DVD player to work sort of", "I bought this for a 04 mustang with mach460 premium sound and it is not the right one. I ended up having to wait for the correct one", "got this to hook up pioneer 4300dvd to 2002 lincoln navigator comes with all hookups for all plugs and worked perfect for my factory sub hookup i just disconnected the cd changer since its not needed. if u want to hookup fast and get the the factory sub working these are the cables.", "Worked perfectly easy installation of my stereo in my 2001 Expedition with the factory Mach system. Just match color for color on the back of the radio and your good to go.", "I wasn't exactly sure what I was buying when I got this. I was installing a new car stereo and admittedly have no idea what I was doing. The end of the wires this picture doesn't show you is actually just an end of a wire you'll be expected so strip and connect to wiring in your car. It does work well though, went to Ace Hardware and got some wire nuts and had the thing wired and working in less than an hour.", "Made install a snap, literally. Worked flawlessly with no problems in my Ford Explorer, would buy again if I needed to.", "Despite amazon's fitting tool, this product does not fit into the wiring harness for the 2004 Ford Explorer Eddie Bauer. I have the Audiophile 6-CD changer stereo unit. Rating a 3 due to Amazon's misleading product guide - I'm sure the product is otherwise fine when used on the right machine.For someone about to buy, remove your factory radio first; check out the connectors and THEN decide what product to order."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,849
|
In my view, these speakers are overkill for gaming. They sound really impressive for such small (but of course not inexpensive) PC speakers. I am equally impressed with them for rock, jazz, and classical music. If my main purpose was gaming, I wouldn't choose these speakers. Am sure there are other less expensive alternatives that would do just fine.
|
{"question": "Hi everyone. How is this speaker system strictly for PC gaming? Worth it, or is there better value to be had elsewhere?", "document": ["The key word is - pleasure.I saw some Youtube reviews saying that one can clearly hear the difference between MP3 and FLAC. Shockingly again, this is true - even with higher bit rates (256 at least) - I did not do a thorough test.As to comparison with the AE's, audio quality is a subjective thing. In our house though, nobody understands how the AE's could be compared at all withe MM1's.MM1 is simply in a different class. Those are not PC speakers. The MM1 is a Hi-Fi speaker set, convenient, compact, and pleasant which is connected to a computer source.Bottom line, for my practical day to day listening those speakers are more useful and as pleasurable as my living room system with Totem speakers and a Classe amplifier.", "Let me start out by saying I love b&w home speakers but for 500 dollars I was severly underwhelmed by these didnt get me excited at all, the usb connection is nice bypasses your soundcard and has its own on board, the sound is nice crisp clear but the base is bloaty sounds too compressed, I hooked my lowly swan d1010IV worth about 150.00 up and was more impressed, even if size is your major issue there are bette options, the emotiva studio monitor at 349.00 blows these away, the psb computer speakers offer more real world hi fi in a smaller bookshelf design the higher end swans for 300 and up crush these for much less money, Im afraid B&w has gone the bose route only to extreme levels they are certainly milking the price here they should go for around 250-300 max, most of the audio engine and focal book speakers offer better performance dollar for daollr", "All controlled via the included remote control which also controls speaker volume. EZ set-up. You do need to change a setting in your Mac (System Preferences) or PC (Configuration Panel) after you plug it into your USB port and turn it in. Takes about 1 second. The included manual explains it very well.Yes, it's a major expenditure. But, like many of you my computer has for all intents and purposes replaced my traditional stereo equipment. I listen to most of my music there. And it really deserves the best possible speakers to maximize enjoyment.", "I hesitantly dropped five hundred bucks on these speakers from a local store, thinking I would most likely return them within 30 days because that was a ridiculous amount of money to spend on computer speakers. Six months later, I'm still using them. In fact, I re-bought most of my old music in a higher fidelity format because it sounds so much better now. I suggest using the USB input instead of the 3.5mm jack.Pros:-Best PC speakers I've ever owned (replaced Klipsch Promedia 4.1 that cost almost as much)-Aesthetic form factor with high build quality-Included remote control is more handy than I expectedCons:-Right speaker (with the amp) gets very warm during use, or if left on (so far this has not caused problems)", "These are small speakers designed for desktop listening and work best when I am positioned within 3-4 feet of them. You will probably not find them adequate for large parties or if you need that body shaking bass that only a large sub woofer can produce. Assess your own situation and proceed accordingly.Some have commented the price for these speakers is on the high side. Value is a relative term, but in my opinion these are well worth the price I paid. If you are on the fence, buy them.", "They don't have a very full sound at all compared to the B&W; MM-1's. They also distort significantly with the Bass on high and still even distort with the bass on low with any songs with decent bass. I was so disappointed in these speakers, I returned them. They are worth $99 or less with easy. They sounded decent at low to mid volumes, but anything moderately over mid to high, the audio suffered from a lot of distortion.2. Bowers & Wilkins MM-1 Hi-Fi SpeakersPRODUCT: Very nice packaging and great size.", "Nothing came close to the sound of the B&Ws. ;Here's what I found:The AudioEngine A5's are powerful. They deliver hard hitting bass and seem to be very clear - until you hear something better. Their application is more for a party if you ask me. Zero tolerance for low volumes and very boomy sounding compared to the rest... but I'd keep them if I had a different application- like maybe a pool party. The Focal's - a $600 speaker system on the Apple site (much less on amazon) were also powerful and had a really really clean amazing sound... until you play the MM-1s and it sounds like someone is holding their hand up to the mouth of the artist as they try to push their voice through the other sounds.", "I must admit that the highs and mids were not quite as detailed as the MM-1s, but honestly the difference may not be noticeable for many people. In addition, some people may actually prefer the kind of sound that the Promedias produced, although I'm a musician and have very sensitive ears, and I do personally prefer the clarity and distinctiveness of the MM-1s. I would say that the low range of the Promedias was VERY accurate. I didn't like the bass setting turned up, in fact I had it almost all the way down, but it was at least as accurate, if not moreso than the MM-1s.In conclusion, I am not poor, but I'm not luxuriously wealthy either, and appreciate choosing a nice system with a good value.", "I got this as well while using the MM-1s. The white noise sound is not a huge issue, as you can power the speakers off when not being used, and that stops the hiss sound. But whenever the speakers are powered on, I could hear it.When comparing the MM-1s to my older JBL Media 3 PC speakers, the JBLs sounded better, as there was more separation and definition of the instruments and voices. While the MM-1s were more \"muddy\" when there was a lot of different instruments playing at once, most notably in the mid-frequencies.", "Real Hi-Fi for a computer speaker !Frequency response is well balanced throughout wide volume range (except above 80~90 % of total power).Excellent built quality.Would be more powerful for the price."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 187,863
|
Technically, yes, you can use this device without a modem. This device will not, however, provide access to the internet. If you have several devices that you want to all talk to _each other_ then this would do that. I suspect you mean, "Can I use this device to connect to the internet without a modem" then then answer is no..It's a subtle and somewhat technical difference, but it might help someone in the future...
|
{"question": "Can I use this alone without a modem?", "document": ["I took it out of the box, plugged it in to the power/modem/PC, and it worked/is still working without a problem. The wifi signal is strong enough for all the wireless devices to get great reception in my house. Nothing really bad to say about this wifi router other than it felt pretty flimsy and cheap, but it's only 20$ so that's to be expected. It's basic and straight forward so if that's what you're looking for then this is what you need.Pros: Low price, simple, effective.Cons: Nothing", "I was weary at first buying such a cheap router, but this wonder has won me over. Our cable modem/router had terrible speeds over wi-fi, and it's range was laughable. The TP-LINK router delivers the same speeds as wired, with only a negligible decrease, and it's range is outrageously good. Sitting in our dining room, the signal still gives 4 out of 5 bars ~75 feet away in our exterior garage. Sometimes my phone even connects from a block away. It took a bit of tweaking to get it running with our modem, but now it works without a hitch, delivering better performance than any router I've had.", "Time warner was charging us $10 in wifi fees and modem rental fee every month( wifi fee?? ?..they are nuts) they were providing a cable modem with built in wifi but range was so short, i had to invest in couple of repeaters just to get wifi on second level.I purchased ARRIS / Motorola SB6121 for cable modem, and bought this router for wifi. For the price i was not expecting anything solid but so many positive reviews made me go ahead with this purchase.I am glad i bought this router as not even without the repeater i have strong signal not only in second floor but also the attic in the third floor gets strong wifi bars.This is a solid wifi router.", "Wonderful device works great with Motorala cable Modem in TWC network. Coulld connect multiple devices phones, Roku, Laptop without a glitch.", "Excellent product, good size, signal broadcasting facilities allows a wide margin, all electronic equipment work without sign problems, I recommend it for use in home", "I got this for around $20. Reaches every corner of my 1800 sq ft townhouse. I've had Netflix 1080p streaming to two TVs at once without a hiccup. Speed test reaches 50mbps on my iPhone (I have Comcast Xfinity, maximum speed only 50mbps, so who knows how high this could have gone). Easy to setup... it's not Apple Airport, but if you are even a little tech-savvy, you'll have an easy time with this. It's proven reliable. We bought a second one for church, and use it on a private network to stream 1080p video from a Macbook Air to an AppleTV 3rd Generation.", "This is a pretty good router. Better that the one from my cable modem. I use them together and set up 2 wifi networks. Works just fine!", "Using the included disc, installing the router was pretty easy (though I had to call Comcast Tech support to use it with their modem, which was not fun).Overall I am very pleased. 5 stars.", "I have a Modem/Router combo from my DSL provider. Before purchasing the TP-LINK router, the DSL provider's modem/router combo provided a slow WiFi experience with drop issues. I still have the DSL modem as it's required by the DSL provider, but I turned off it's router/wifi capabilities and now use this TP-Link router for WiFi... Like I said - HUGE IMPROVEMENT!", "My Comcast modem/router is behaving badly -- dropping connections and giving so-so signal strength. I bought this item but had my doubt -- I do not plan to use it as a router, more like a repeater. Not sure if it is going to work. I plugged in an ethernet cable to its WAN port (NOT directly from Comcast router's WAN port, an ethernet router is behind that), then connected my laptop to one of its 4 LAN ports. The mini-CD was in place and autorun started."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 187,869
|
It is an espresso coffeemaker which is concentrated coffee. You can dilute it but it is usually drunk in a small demitasse cup or mixed with milk (latte).
|
{"question": "Can I make \"coffee\" with this? I like robust coffee. TIA!", "document": ["Makes great coffee, and easy to clean. Perfect if you're the only one in your household who drinks coffee, like me, but still large enough to make espresso for a few guests after dinner (makes about 3 double espressos per pot). I also like that it's stainless and not aluminum (which has been linked to causing Alzheimer's when heated).", "I like the smooth design of this 6-cup Espresso maker. 6-cup is the right size when you have friends over for coffee and cakes. It is easy to clean.", "It is the perfect size for two espresso, but it has to be broken in. It doesn't brew as quickly and well as my previous one from Italia. The lid is a little bit flimsy. But I really like that the coffee basket inside is stainless steel; that is what sold me on it.", "Not a 6 cup, 8oz. each coffee maker. It make just one 8 once cup serving. I bought this as a replacement for my Mr. coffee expresso maker. Works as discribe, I use this every morning. One good thing, when there is a power outage that last till the morning, I still can have my coffee due to the fact it doesn't require electrical power.", "I am so happy I bought this coffee maker. I love espresso, cappuccino. I had a smaller one, but I would have to make more. This 6-pot is just enough. No more having to let it cool off or run it under cold water. If I have company, we can sit and drink together rather than make one cup at a time. Also, received this earlier than the expected delivery.", "I had always used the electric plug-in cappucino-espresso makers and they died after 2 years of not very great or hot coffee. The milk frothers don't work well on those either. Admittedly, I usually got the fairly low-end ones, and my experience might have been different if I had spent a couple of hundred dollars.I have been using this espresso maker for the past 8 months and I love it. Beautifully designed and well-made. Yes, Italian! It makes fabulous espresso and is ridiculously simple for someone like me who is a newby at manual espresso makers.", "I use a couple of scoops of fair-trade (a little plug in there :-)) coffee that I grind or regrind so that it is very finely ground. I tamp it gently with the back of the scooper. I love the feature that allows you to open the lid to check progress. The bakelite handle is the way to go on these, it doesn't get hot as long as you make sure that the handle isn't directly over the burner. I put the espresso maker at the edge of my burner.", "This was my second attempt at an upgrade to stainless steel, and I've been using it for about six months. Look no further - this is a terrific espresso maker at a very fair price. Nicely designed (none of them have great handles but this one is fine if you keep it out of the flame), easy to clean, doesn't get dingy like the aluminum ones. Makes scrumptious coffee too - just the right amount for one addict-sized latte in the morning. Love this pot.", "It brews about 8 0z of espresso which is suitable for two people. If you are one person, you will probably end up throwing a little extra away. You may want the 4-cup model for just one person. If you are preparing espresso for a dinner party then you may want larger than a 6-cup model. Also you can make a regular American cup of coffee by adding hot water to your espresso, at approx. 1:1 ratio depending on your taste. The straight espresso is great as a topping for ice cream, try it.", "I recommend a frothing unit. They make a beautiful marriage."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,877
|
Yes, it has 2 legs in the middle
|
{"question": "Does it has middle leg for support?", "document": ["The futon was as expected and described except for a misaligned middle leg. When attempting to straighten it, I heard a crack sound and now it needs to be manually moved into place whenever the futon is moved.", "The sofa is nice. Packaging was ok. Only issue the package was missing a plastic cap to put on a leg. Overall I like it and I think it is practical.", "No cons, if you like firm mattresses, in fact a solid mattress is better than a loose one, I get backpain or a stiff neck from a loose matress. Me and my wife love it! Only a defect in the leg, the hole was not punched out for the screw, just going to let the company, the product is still solid!", "Wow what customer service all the way around. As with many of you reading this, I really do not have the time to waste writing, but I spent the time so that hopefully you will not use these people or order this item. I also would encourage each of you to take the time to write regarding experiences with bad customer support so that we all may know who to not order from.", "Everyone that sees it in the room I put it in is super impressed, because they had a college-based idea of what a futon could look like , but this is an a futon that does not look like it belongs in a dorm room. I have slept on it to see how it sleeps. Its comfy if you don't sleep on the seam in the middle where the futon actually is split. To fix this, I just bought a twin sized down pillow top mattress pad for that, slept on it again, and I cannot feel the seam anymore.", "Status: 1 star is slashed off because of it.4) Sleeper - On converting it into a sleeper, the mid partition slightly come in the way, so you cannot sleep on your back in the middle. Also, since the seats are not very soft, it is not a sleeper material. I bought a simple foam mattress topper from walmart and put it over it, it completely turned the situation around! I could sleep really well on it!Status: Problem solved! I so much love to sleep on it.", "The item came with no legs. Upon checking with customer support, they stated to look in the pouch underneath. This of course, I had already done. They then simply punted to the manufacturer and stated that I would need to handle the problem with them? This seller gives me the number and states that I will need my order number to have it taken care of with the manufacturer. Upon calling the manufacturer to resolve, they stated that my order number meant nothing to them, so I would need some information off of the item itself.", "A strictly two person job it is.8) Strength - Don't jump on it. Be careful with it. Sorry, it cannot handle what a sturdy wood bed can.9) Height: I have no idea why would anyone complain, unless of course, you have knee issues. Isn't this the regular height of the seat? The mattress of it is thick, so while sitting, it adds to the leg height we see. I always found Malm bed from ikea to be much much lower, sitting on MALM bed felt like squatting esp., if you put box spring onto it.", "CONS- The futon is 10\" high from the ground - so sitting on it is extremely low for those with back pain!- The sitting area is far from the back, therefore, if your back needs some extra support, you're out of luck. In addition, the upright back cannot be pulled in close for comfort - it's farther away. And oh! If your legs are too short ... don't even think about it.- returning the item is hard and expansive - it's 1/4 of the price you paid + your seller may charge you restocking fees and shipping fees for when they have initially shipped it to you ... so do not make a hash decision.PROS- would do OK in kids room age under 14 or depending on your comfort level or if you do not use it often.- The Futon looks great when looking at it.- If your decor is along the same line, it will shine.Finally: I would not recommend it to my friends.", "yes its cheap but it doesn't feel as good as it looks. It only been a month and there is already a crate in it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,883
|
A piece of plastic rug mat.
|
{"question": "The bed does move around on my hardwood floors. What can I affix to the bottom of these to make them less slippery and that won't hurt my floors.", "document": ["I bought 2 sets and love them. They move with the bed when I am rearranging furniture (hard wood floors).", "Just have to figure how to drill holes in the bottom.", "These risers make the bed look like a designer bed. They are stable and allow for adult use of the bed. I love them!", "I had these sent from Amazon to my niece in college because her roommate had some. They make more room under her bed for storage space. They were all sold out at the local stores. I had them to her in two days.", "My bed frame did not have any type of cover on the metal 'foot' and I was not sure if with use the pressure of this on the plastic top would take a toll. I have these in every bedroom of my house - make for a great space to store flat totes with extra bedding in.", "These do exactly what they say. I am able to store totes plus my Coleman tailgating grill under the bed. To me they seem very solid (not sure why the main negative review says the opposite). However if your bed frame is on wheels then I would not *ahem* rock the bed vigorously back and forth. Also, note that the bed will be more difficult to move. For example we wanted to put a piece of furniture next to the bed which would have required moving the it several inches.", "Little did I know that no only was I getting more storage, I would have a more comfortable bed to make!I have a bulging disc and arthritis, so making my very low bed was painful. Now because the bed sits higher, it is much easier to make and change sheets because I don't have to bend over as far!Thank you for a great and reasonably priced product!", "Needed these because my kids new bunk bed was too close to the ground. I was wondering if they would make the bed unstable. They do not make it unstable at all.Pros:1) Affordable2) Very stable3) Large leg/ foot adaptability4) BlackCons:1) Wider than expectedThese are great if you need them. If you have a ladder you will need to extend the length of the rails because the ladder will not be long enough to be at a safe angle. Very good and solid product.", "I bought these to raise my sons bed so that we could get storage totes under his bed for his stuff. The only problem I have is that the set should include 5 not 4. The bed my son has in brand new queen size bed. When we raised the box springs with the risers it kinda of sagged in the middle. My husband got a brick and put under it in the middle to fix it because you can't buy just one. Aside from needing one more the product is just what I needed to make extra storage.", "I have casters on my bed which I thought were removable but apparently they aren't, plus I had changed my mind about needing this much height anyway (I probably only need maybe an inch or two so that I can use the lids on my underbed storage boxes), but had already pulled off the plastic. I went ahead and raised my bed just to see how they worked. I think they possibly might be stable enough if my bed were against a wall so the feet wouldn't shift, but don't know. I might not mind a jolt from having the bed shift, but I wouldn't want to risk it now that I have a new dog who has recently discovered the fun of lurking under the bed.Strangely enough, I think these would make PERFECT little planters for my front porch, even the coloring."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,896
|
2 3/4 in deep,8 7/8 wide...the broiler pan is 1 5/8 deep
|
{"question": "How deep are the containers?", "document": ["great hot pot, perfect for 2 to 4 people. i like that it is deep so you can pour a good amount of broth.", "the pan attached with this product is very thin, so it gets very rough on the surface after several times uses of stir-fries.but if you only use it only for shabu shabu, it won't be a problem at all..good for hot pot or shabu shabu..", "it is useful.. can do many things...i use it in my dorm... its very suitable for cook noodle or hot pot", "We've only had this cooker long enough to use it for hot pot cooking & haven't taken advantage of the grilling or steaming features yet--but it is a great little hot pot! We had family over to show them this fun way of cooking that we learned in Beijing, and the pot held plenty of food for everyone--it heated up very quickly, both initially and when we had to add more liquid. The removable cooking surface also makes for very easy cleanup. I am totally pleased with it and think it's a great value, as all of the others we considered were more expensive.", "We will mark it with nail polish. The other drawback is that this thing comes with virtually NO directions. I had to ask a question here to find out how to use it.Would I recommend this hot pot? Absolutely, but with the caveats above.", "We loved having this out and thought it would be fun to do at home. This cooker is perfect. Made the mistake of leaving the grilling accessory so the broth did not heat up properly the first time. Once we realized that was the problem, no issues. Fun dinners as a family!! !", "We love this thing - have used it quite often. Mostly for home-made shabu-shabu. It is perfect for what we need - not much more to add :)", "We love this cooker! Because others had complained about the broth not getting hot enough, we cranked it up full blast. Within a couple minutes, the broth was bubbling furiously! So, we turned it down, and used it at setting number 1 (of 3). Our thinly sliced meat cooked in less than a minute. We dipped it in Ponzu sauce after cooking it. Delicious! You put aromatics, such as ginger and garlic, into the strainer in the center, and the meat and veggies are cooked in the moat.", "We just did a Shabu Shabu night and this pot worked great. It heated up nicely, cooled down nicely and the meat cooked fast!", "We have now purchased three of these...two that we use for hot pot parties, and one as a gift. They work great and are very versatile. Hot pot is a blast. We enjoy it, and this is the perfect pot to use."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 187,926
|
That's what I did. I use one for two rear speakers, the other is for the other two rear speakers. No wire pulling under the floor over the floor! It works like a champ. Only negative is when I have a power flick, I have to turn the two remote boxes back on individually. I assume your sound system already has 7.1 capability, you just were using 5 speakers.
|
{"question": "I have a 5.1 wired setup already. Is there any reason this couldn't be used to power the other two speakers for 7.1?", "document": ["The Rocketfish satellite receiver is nice looking and easily concealable, as is the sender, and the product does what it says it will.Unfortunately if you're running 7.1, you will need two of the device, as it only accommodates 1 set of speakers per unit.The only other product like the Rocketfish I could find was a Bose Wireless Rear Speaker Kit, and it costs $250. I haven't used the Bose kit, but for over double the price, I'm willing to just stick with my Rocketfish.One thing to note, due to the lack of power the satellite receiver provides (only 20 watts per channel), it does not have enough power to run Dolby True HD or DTS HD Master Audio, so if you can afford to sacrifice the uncompressed audio formats, then this product will suit you just fine.Pick this one up if running wires is not a viable option for you.", "It also has a compartment underneath for storing any extra length of power cable. The included wiring seemed pretty cheap, so I used 14-gauge copper wire, but it was a tight squeeze in the terminals on the units.Once everything was wired and plugged in, I didn't even have to press the \"connect\" buttons - the units synced immediately and I was good to go... but there were two annoyances. First, distracting white noise/static from the speakers. Using the receiving unit's physical volume knob I could eliminate the static, but then the sound was too quiet.", "I am very pleased with this unit after using it for two weeks. It worked exactly as advertised and seems to be working flawlessly. I'm using it with my rear surround speakers in my 5.1 surround setup. My living room is on the small side and I would estimate that my TV and front speakers are about 15 feet from my rear speakers. I have no Wi-Fi or portable phone interference whatsoever but the nearest Wi-Fi router is about 40 feet away and these units are only separated by about 15 feet.I had no problem balancing the surround sound on my Yamaha high-powered receiver after setting the volume control on this device's amplifier to full.", "I got this with the intention to pipe the surround sound to my rear speakers without running speaker wire across my living room. For the price, this is a fairly decent setup, with little interference. I also have a 802.11g home network, plus perhaps several other 802.11 networks from neighbouring apartments. For the most part, the sound is pretty good and clear.The only reason I am not giving this 5 stars is because I sometimes get popping noises from the rear speakers. Although this is occurs only once in a while, it is mildly annoying, and I get the sound even when the source is switched off.", "The product is a quality item. I bought it two years ago as an open box item at BB. 500 sqft family room. Wi-fi in the house connected to wii 360, ps3, Samsung LCD and pc, cordless phones, works great and is easy to set up and u just plug it into your speaker output of your amp.Specific con to my set up and amp: I have my receiving box hidden behind my couch and connected to my Onkyo amp with \"2 -zone\" capability as \"rear speakers\" in a 5.1 set up.", "I purchased this kit with the intent to use it not in a surround sound system but to pipe music to two speakers in another room, so that I can play music in multiple rooms. I set it up so that the Rocketfish sender is connected to my Audio-Video receiver unit's output for front stereo speakers (while the front stereo speakers are also connected to the same output). The Rocketfish receiver was setup in the other room and I hooked it up to two other speakers. And it works great! I can play music through my audio-video receiver and listen to it while I'm in either room.My audio-video receiver can also be used to play surround sound but like I said I'm not using the Rocketfish kit for playing surround sound in the same room, but to play stereo sound in different rooms.", "I bought this because my wife did not want wires running across the living room to the rear surround speakers. They work as advertised. However, I had two unanticipated problems:1) The power is very low. Even when they are set on maximum, we can barely hear them. There seems to be a real limit to the power they can put out.2) When the \"transmitter\", no longer receives a signal, the rear speakers put out a very loud hum. Thus, when my wife turns power off our Pioneer A/V Receiver so that the Rocketfish no longer gets a signal, then it generates a loud hum.", "I have used this for years because wires are not options. I don't hear any background noise or pops. It never broke down as other reviewers claim. Very very seldom, the connection is lost during intensive audio moments of movies. Like loud crashes but that is almost never and you just hit the reset button. By the time you sit down they are already active again. That has happened to me like 3 times in about 3 years. Love it! Wired would probably be better but this is a easy and low cost alternative.", "It's a simple product to allow those of us who don't want to run wires to rear speakers to enjoy 5.1 sound. The installation and setup were trivially easy. The system works just as it's supposed to with no weird hiccups, sound artifacts, buzzing, noise, etc.", "This unit seems to technically operate fine right out of the box, and though it only has wire terminals, you can hack your own RCA plugs if necessary. But there are two major downsides:1) It adds a noticeable fuzz (like white noise) for high frequency sounds, meaning attached speakers must have their treble turned up individually from the full system, then the output volume turned down on the Rocketfish. This offset disrupts the overall audio balance in a way that's difficult to fine-tune.2) In addition, the unit adds a perceptible audio delay of 15-20ms, meaning with a gain-balanced setup there's a fair amount of echo introduced."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 187,934
|
Yes, any type.
|
{"question": "Can you use rechargeable batteries on this camera? If so, any particular type? Thanks!", "document": ["My brother has always used Pentax camera equipment. He was very particular in what he used. I like this camera very much. I must agree with other reviewers about the door to the batteries and Memory Card. I wish the door was easier to open and close. Seems kind of flimsy, but overall, real nice camera. Thanks.", "I have a Sony h55 point and shoot that has many of the settings and manual abilities of the x5 but I wanted better without going full blown dslr. While purchasing a Nikon p&s; with and for my wife at Target the x5 caught my eye. After reading tons of reviews, both pro and amateur, I decided to give it a try. Due to an error on their website and Targets willingness to price match their website I got it for $190 after my Red Card discount.I've had it for about a week, have taken about 400 throw away type photos and about half an hour of video using Duracell Nimh rechargeable batteries and a Transcend Wi-Fi 32gb class 10 card.I've tried out just about every scenario I can think of and changed a bunch of things around just to see what it's capable of.Battery life.Using the rechargeable batteries and Wi-Fi card and wirelessly sending everything to other devices has used about half of the battery life which I have found amazingly better than the Sony.Ease of use and ergonomics.I have big clunky hands and am used to a much smaller camera so it took several dozen shots to get the hang of not holding it like the Sony to get the best and fastest usage of the buttons.", "I use rechargeable AA batteries and they last a long time. The only potential downer for this camera might be that the camera is not a pocket camera - has a decent lens on it - sort of mid-way in size between a DSLR and a pocket camera.", "For me, this is all I will need for a long time. Oddly, I enjoy the fact that it uses AA batteries...I've had troubles in the past with chargers for proprietary lithium batteries getting lost, and then you're out of luck. I just use rechargeable AA batteries, and then switch them out as needed. Bottom line...I don't think you're going to find a better camera for this price. Two thumbs up!", "I was looking for a small point and shoot with a viewfinder. I am a Nikon person but thought this might work for a throw-in-the-bag for quick stuff. But I was not impressed. I did not like having to use separate batteries as opposed to the rechargeable battery packs. It doesn't say anything bad about the camera, my mistake for not researching further, just not what I was looking for.But customer service was quick as far as my return...no questions asked.", "Even better than I expected. Especially like the macro settings, great for extreme close ups. The editing software is more versatile than Kodak. Definitely go for rechargeable batteries because it takes 4 AA's, the good news is the camera is kind on the power so those batteries will keep you running for days. Overall very pleased, it's not rugged, I'm pretty sure a couple good bounces off the ground and it would be toast, but I use it to photograph jewelry, clothing and assorted stuff for eBay. It's nice to switch to the viewfinder to take pics outside without shooting blind because the large screen looses its charm in the bright sunlight, nice to have the option.", "The macro mode is very sufficient and produces sharp, up-close images. The interface was very easy to figure out after I played around with it for a while. The viewfinder is great for sunny days but if your taking shots that are really close to you, I suggest you use the 3 inch LCD (Which is very impressive might I say). One flaw was the use of FOUR AA batteries. The Lithium Ion battery used in most Point-and-Shoot cameras is much easier than using rechargeable batteries.", "Battery doors seem to be the first thing to break.No printed legend to identify how to install the 4 batteries.Four $$$ batteries. A rechargeable pack would be sweet!Buttons, Buttons, Buttons - There are tooo many buttons on this camera. It even has a Green Button!Pullout tilting LCD screen... Could have lived without that. Looks like another thing to breakManual Flash popup button. I liked having it popup when needed.Well that is about it for now. Will update some more later.Blessings,John 20:29", "The battery compartment latch is very, very, very flimsy. I have had another camera with a similar latch, and it broke. This camera requires four batteries. Other equally good cameras require only two batteries with the same ability to hold the charge and take numerous pictures over time. Be prepared to purchase several quads of rechargeable batteries to feed the camera. It is slow to obtain an initial image (missed that picture! ); the zoom is very jerky (slight touch zooms rapidly in or out). And most frustrating, the focus on face feature randomly seizes on objects not wanted to be in focus.", "We bought a Pentax camera about 15 years ago and loved it. Since then the pixels on digital cameras have increased so we wanted to upgrade. Took this one on vacation. Easy to use; great for quick capture movies and can take nearly any type of picture. So excited about this camera, thinking about taking a photograpghy class."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 187,949
|
Yes the Rokit KrK's fit perfectly. I have a small child and it's safe around him as well. The price also went down on the stand it use to be close to $200 for the set.
|
{"question": "Will my Tannoy 402 or Krk Rokit 5 Gen 3 fit good on these? Would I need padding under the speakers?", "document": ["The top plates are a little too small for krk rokit 5s. They still fit but I never felt 100% safe about putting my brand new monitors 3 feet above the ground in that little plate. Also, I would recommend getting better screws for the top plates cause honestly the ones that come with the stands suck.", "Hello there. I usually do not write reviews at all but I thought I would cover some views on this since studio stands are pretty important to producers.1. These stands will hold 6" and below studio monitors. If you have KRK VST series or Yamaha HS80's DO NOT PURCHASE THESE! They will not fit at all. These are designed for small speakers. Optimally for 5" for the perfect fit.2. Be careful when ordering from here. When I received my package.", "I received the monitor stands in good order, assembly was easy (no instructions, but really not needed. I'm using these for a pair of M-Audio AV40 monitor speakers, and they fit on stands perfectly. (you might want to get some kind of foam pad for the speakers to sit on). Mine sit on hardwood floors, but I still had to put on the carpet spikes, since the wingnut that secures the telescoping stand onto the base extends about a half inch from the bottom.I wouldn't want to put a lot more than 10-12lbs worth of speaker on these, but beyond that, these are good quality stands for the money.", "The screws were warped and I personally had to go out to LOWES to purchase new screws in order for me to secure the plate to the stand.3. Base can be unstable. Make sure you secure all bolts on the bottom tightly and evenly or else you will have a very unbalanced shaky stand. (Carpet works best I also tested on tile)4. If you are to spend a little more I would highly suggest the SMS6000 stands. They are much more stable but will cost you 40$ more. Worth the investment.Cheers", "These stands aren't very sturdy at all. I have a small set of Behringer powered speakers and I was worried that the stands would fall over. I'll probably make some reinforcements for the stands or something so I can keep using them.", "Great product. Arrived ontime. No instructions but easy to figure out. Don't be afraid to screw the top plate down real good - should not wiggle. The black washer goes to the butterfly screw. Assemble washer to butterfly screw before you screw into base. Only enough rubber sticky pads for one top plate. Emailed the seller to send more and never heard back. Found round rubber sticky pads at truvalue for $3.00 so not a big deal. Sticky pads I had to buy come only in beige, not black but who cares because you can't see them anyways.", "Too light for the KRK monitors I got - maybe good enough for tiny home-theater speakers. DO NOT buy these for anything over 10 lbs. They wobble and sway. YIKES.", "These stands are pretty sturdy. Really easy to put together even though they came with no instructions.They are easily adjustable and easily turn for getting that sweet spot locked on right where you want itI recommend that you put the carpet spikes on using a wrench because they catch the holes easier.The plates for the monitors are a little small, and if you have speakers that are bigger than 6" you will have some issues. I have KRK rokit 6's and they are right on the threshold of what these speaker stands can handle.Also make sure you add some weight to the base of the stands.", "The top plate seating the monitor is secured well enough but it's too small and there's no way to secure the monitor to the plate. My Yamaha HS-80M speakers measure approximately 10\" x 12\" (25x30 cm) and the plates measure 6\" x 6-1/2\" (15x16.5 cm), which is approximately 1/2 the area of my speaker base. I used thick rubber pads with sticky tape on both sides of the rubber between the speaker and the plate, primarily for isolation, but they effectively help hold the speakers in place on the plate.", "she did not demand I immediately remove them from the living room. They are accepted. The Mission M71 speakers are heavy(ish) bookshelf speakers and they are perfectly safe on the stands. The much better speaker positioning I now have has improved the sound of the stereo. I might order another pair for my home studio to raise my KRK V4s to head level from the desktop. A good deal."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,964
|
Great sound for the price. i think you will be pleased.
|
{"question": "How good is the Bass With these. I watch Movies and Game. Would this Also be able to Swap to TV in Front Room? Think of independance day Bass.", "document": ["Listening to music or movies on the computer is more and more common, so I wanted better speakers. Never heard of the brand, but they looked good and had good reviews. Wow. Amazing. Blown away, literally by these speakers. Excellent volume, incredible bass. Maxed out, you can hear AND feel music in every room and OUTSIDE. Great power. Volume knob has input for any kind of phone/MP3 player - you just need a 1/8 inch male to male (think headphone size in and out) cable.", "I own a pair of top of the line $2k Polk speakers from the late 80's so I know what top notch room filling speakers sound like. These Cyber Acoustics can't touch my Polk's and I certainly wasn't expecting that they would. I am simply making the comparison so that when I say these speakers sound very good, you know where I coming from. I would say for the price they sound excellent. I cranked it at the loudest level I could tolerate and heard no distortion. I could have gone louder so I am not implying it was at its loudest, but at the volume I tested, I doubt if anyone would play them louder for every day use.", "Granted, I don't have the front/rear separation of a 5.1 system, but these smaller speakers put sound all through the room. I couldn't find a dead spot. Just crystal clear sound on a system that literally explodes during action scenes. And compared to the speakers on my TV? Those are a joke. They are like the old tin-can and string system compared to this Cyber Acoustics.Before purchasing these speakers, I recently posted a question in the Q&A; if anybody had used these for home theater.", "The sound quality is great and carries well throughout the house. No matter what kind of music you are listening to (bass heavy or not), the sound comes across with no vibration or distortion. This speaker system is easy to setup with only two wires connecting the subwoofer. The system is compact and doesn't take up too much space. Come to think of it, this system would even be perfect for a dorm room or apartment. The volume control, on/off switch, headphone jack are located on a circular dial.", "The cord from the back of the sub to a power outlet is 5 foot and the cord from the pod to the speaker and also to the PC is about 6 foot each. The sub is about 9 in X 9 in X 9 in with a good heavy quality feel.I used my son's skull candy headphones to test out the headphone plug on the pod and it sounded fine. Of course, your not going to get the bass out of the headphones like you do out of the sub. It sounded just like when I have it plugged into the headphone jack on the front of my PC.", "These speakers are perfect for movies they are crisp and still give you good bass. I highly recommend these speakers to anyone looking to add some great sound to their room or home.", "The music sounds like it's coming from a much larger, more expensive set of speakers.The subwoofer is a real 6.5\" ported speaker. It's not like others which lure you with a large speaker on the front but in reality, the sub speaker is some silverdollar-sized, down-firing speaker you can't see. And this makes a difference if you're watching digital movies. A larger sub can handle the sudden increase in volume (like an explosion) without crackling or breaking up. On Blu-Ray, the sound is nearly impressive as it was on my room-engulfing 5.1 system.", "I currently have a 6 year old creative labs 2.1 system and it beats this one hands down.For the pro's and con's:PRO's:- Good build, sturdy, simple design.- Easy to use wired remote (like the round knob action), and light up so its easy to see in the dark.CON's:- Sound is good at lower volumes but gets easily distorted at higher volumes and creates a vibration with the plastic pieces of the speakers.- Not truly Flat Panel, maybe the front screen, but the speakers are thick.- Bulky without the performance for both the speakers and sub.- Sub is large but doesn't produce the deep bass it should for its size.- Speakers are also large and obstrusive for the sound that they output.There are better products out there for around the same price as this one.", "Left speaker came busted, so I had to return it, but the right speaker worked fine. The sound isn't terrible, but the sound is equivalent to the speakers on a decent TV. The higher the volume go, the more obvious the flaws and distortion. Not sure if I just got bum speakers or not, but they sound clear at lower levels and loads of distortion at room-filling volumes. The bass isn't very good either, but it's acceptable. I compared these to my friends cheapo computer speakers, my Sennheiser HD565 headphones, my Paradigm speakers, and my tv speakers to make sure it wasn't just the mp3s or my system.These are better than some super cheap computer speakers I've heard, but definitely not a good buy, not for the 70 bucks I spent on it.", "This is a great system for the price I paid for it. Fills up the room with bass and vibrates stuff off my shelves when turned all the way up! I would totally recommend this system to your average music listener looking for loud sound and good bass. My one complaint is the bass sometimes gets a little distorted at max volume. (Max on iPod and speakers) But I almost never listen to it on full volume because it's too loud! It's absolutely worth $75."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,966
|
Yes
|
{"question": "Does the glass lid have a metal edge? I want to be able to reheat in the microwave, so no metal is important to me.", "document": ["I needed a large crockpot for our kitchen at work so I ordered this one. It does heat up fast, gets very hot, and its really big. However the lid has no rubber gasket around it, its just a thin glass lid with a thin metal edge, it slides around when carrying the crockpot but my biggest complaint is that it allows way too much evaporation. Rather than having the steam come out one hole in the lid like the smaller hamilton beach cooker I have it has steam seeping out the entire perimeter of the lid, i found I had to add water about twice as often for some things, my vegetable soup evaporated a good 2 inches while cooking.", "I guess all of those items (except the indicator lamp) must be bought separately.6: I saw several listed \"8 Qt Pots\" where people were very disappointed that they were not 8 Qt at, all but barely made a 7 Qt at best. This unit IS an 8 Qt up to the top lid edge......and if you needed a large one, you will love it's size! Real life use? (NOTES: You never want fill any pot to the very top edge, it will obviously boil over and make a MESS!", "This thing is huge, but that's what I wanted and it works well. I have a small slow cooker which is fine for cooking only one meal at a time for my family, but I want to be able to cook an extra amount (ex. chili and soups) that I can put in the freezer for a quick meal on those hectic days when I just don't feel like cooking supper. I like how the cord wraps up neatly around the lid/stand that attaches to the back of the pot.", "A tiny warning label on the top right says it is a hot surface but like everything else about this device this vastly understates the matter. It is clear your purchase price goes towards a rather nice cooking pot, a glass lid, a very powerful heating element and almost nothing else. Not even an inner wall to separate the heating element from the outside surface so you will want to give it a wide berth when it is on. It is so lightweight that removing the dish while leaving the lid on the handy holder built into the side makes the unit fall over.It does cook, and it cooks well given only two possible settings of \"low\" and \"high,\" with a \"warm\" setting that seems to be a slightly undersold \"simmer\" function.", "We're a family of 6 and I use my slow cooker a couple times a week or more. This larger size is wonderful for cooking extra large batches of sauce, beans, etc. to freeze. A smaller cooker doesn't allow for leftovers with my crew! I didn't want the electronic control panel, as this is what went wrong with my last cooker. The straight forward dials are great by me. My only critique of this particular model is that the metal on the outside is rather flimsy and I predict it will end up dented easily.", "This is what I found:1 - 6 quart level - Six quarts raised the water level to a point approx. 3/4 in. below the inside lid support ledge (where the bottom edge of the lid would rest during cooking). Pretty safe operation levels.Seven quarts - The seventh quart of cold water, raised the water level to a point that was just below being even with the inner lid support edge (most of the edge radius can still be seen above the waterline). The water itself does not touch the lid when it's placed in its cooking position on the insert.", "Even had this been a heavier all glass lid I think it would have worked better. This lid is paper thin and poorly fitting, no seal whatsoever. If you dont cook a lot of liquid based dishes and rapid evaporation isn't a concern for you then this should work pretty well.", "Buyer be wear!! After having this for about 2 months the lid shattered, WHILE COOKING, leaving glass all over the counter, the floor and in the chicken stew.. So out went the food. Thank goodness I was home... After calling the company all they would do was send me "another" glass lid. I won't buy Hamilton Beach products anymore.", "The glass top shattered for no apparent reason while I had $40 worth of very fine ingredients cooking away! The pot had been on low for about 9 hours, overnight. I wake in the morning and walk in the kitchen to see the lid shattered, broken glass all in my stew. What a mess. Poorly made is the only answer. I guess you get what you pay for sometimes.", "In fact, there's approximately 1/4 of an inch of vertical distance between the water level and where the bottom aluminum edge of the lid would rest when in cooking position.Eight quarts - The eighth quart raises the water level to the very top edge of the insert. Attempting to place the lid in its cooking position causes the water level to overflow and displace approximately 1 to 2 ounces of water.So technically, the insert will just hold 8 quarts of cold water uncovered. However, given that the devices primary reason for being is cooking, it is not 8 quarts of cooking capacity since the unit has to be covered (with the lid) to do its job."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 187,968
|
Yes, it is a satin finish. I use it in a commercial setting in 3 stores and has held up well. I would recommend it.
|
{"question": "Is this item really satin finish and not chrome? I see a chrome on listed for $30 less. But photos look the same though.", "document": ["), and will \"fix\" the listing. Well the listing is till showing this non-existent coat rack.I had to repackage BOTH coat racks and sent them back. After they received both coat racks (I can see the confirmations from Fedex), they didn't refund until I called to follow up. The entire episode took more then 6 weeks to resolve.What a frustrating and disappointing experience with Amazon.If anyone actually received the correct coat rack pictured here I'd love to hear from you. *I gave it one star because you cannot give no star...", "our guest room is usually not used so towel storage is just not a big problem but when its used, with the pool and the grand kids, this handy little item lo fits in with the other executrices and it sure can hold its own in towel storage", "easy to assemble, sturdy and architectural. love it. Received it right away and took no time to put together. I would buy this again.", "A little pricey but well made and holds a lot. I bought one for my daughter 2 years ago, in perfect condition and so I did not hesitate when I felt price was reasonable.", "I am more than pleased with this coat rack. It arrived timely, and is of very good quality. It was easy to assemble and is very strong and sturdy, as well as being very attractive. I plan to use it in a guest area where there will be several children showering and using towels. It is so much more satisfactory than a single towel rack. I REALLY like this rack.", "This product does NOT exist. I ordered it, and a SIMILAR (BUT NOT THE SAME) coat rack arrived (6 hooks only in a different configuration). I told Amazon about the mistake and they \"PROMISE\" they'll send the correct one. I then received the replacement, which turned out to be exactly the same as the first one! Now I have TWO identical coat racks, neither one is the one I am supposed to get!I called and talked with someone, who after some investigation said they actually don't carry the one pictured here(!", "Great quality. Super easy to assemble. It looks good and has a nice heavy base so it feels very sturdy."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 187,982
|
Mine came with two, but based on other responses it looks like they may have accidentally given me an extra. It also comes with a carry bag that isn't pictured on Amazon.
|
{"question": "Does this come with one or two QS39 quick-release plates?", "document": ["First impression is that the tripod and the sbh-100 ballhead are solid. Yes, the legs are a bit challenging to swing and the sections kind of hard to pull out, but that's actually a good thing. Remember that sections that slide easily can also collapse easily. The O-ring on the column is also a cool feature to absorb any accidental release shock to your equipment. A key set is also provided to tighten the legs and the ball head link.There is some play on the tripod/ballhead, but you just need to tighten the column and the quick release plate on the head and it's tight again.", "I actually like that double security feature on the plate. The tripod/ballhead were actually bigger than I expected, with thick padded legs and a strong core. And it comes with two plates! Keep in mind that the ballhead is a full-range ballhead so you may have to work on leveling your camera.You may have to play with loosening the buttons on the legs to get the multiple leg angles and the rotating/collapsible column is definitely a plus. Overall, it's a beautiful tripod that weighs just right for my equipment.", "This is a very stable tripod, it does get a little iffy when you extend the center pillar out to the sides but still very good if you use a remote release. The only issue that I have is I wish the ball head had a better lay out so that it was easier to flip from landscape to portrait.", "The bag is well made and holds the tripod with the head attached. The flips locks are well made and adjustable. The leg release buttons take a minor amount of time to get used to, but again are better than the pull-type that the benro and induro models use.The ball head....it does what it should. The ball head is not quite as smooth as I was expecting, but the panning action is pure silk. I would rate the ball head by itself at 4-4.5 stars.", "Granted I've only had the tripod for about a week. The other option I had in mind was a more expensive Manfrotto for twice the price of this one.", "This Vanguard tripod is versatile and can adopt many position. Strong enough to support my Canon 7D in any angles. It is a very good product. But, I order it with the Rocket Air Blaster Giottos AA1900. It was suppose to be a good deal! Today for the same product, those two items are at 175.95$ and i paid 203.40$ a month earlier. Without Rock bag and the free Vanguard camera bag mail-in-rebate...Did i miss the DEAL!", "The arrival of this tripod was very quick. I have used it once s far and I really like it. It is much better than the tripod I was using. I am still getting use to not having a lever to move my camera around with, but I am sure I will get used to it in time. It seems light enough to carry around for a while and the carrying case is a nice feature.", "First I bought a Vanguard Alta Pro 263AGH Aluminum Tripod with GH-100 Pistol Grip Ball Head. The head was so tightly attached, I could not remove it, even with tools. I sent it back. Next I bought the combo above. This time the azimuth numbers are painted on counter-clowckwise. I'm returning it soon. Two defects on two tries. VANGUARD, please do something about your quality control.", "though, i cannot still 100% approve or reject this one since i don't use it often. http://www.amazon.com/gp/product/B0073F8TS0/ref=oh_details_o01_s00_i00", "I compared about a dozen tripods, many with the articulating center column, and even bought the two I thought best fit my needs. I needed something compact but still tall enough for my 6'1" size. I really wanted the height offered by the Benro a2970f, but the folded length was just to long. Needed light weight and small size for backpacking. I've been playing with this setup for a while now and I love it. I sent the 263AT back to amazon (kinda ordered it by mistake anway.)"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,003
|
English
|
{"question": "Is this camera in english or Japan?", "document": ["I read about this camera before purchasing & liked the features. When it came, the camera was ONLY in Japanese, no other language including English. I looked back at the page I purchased it from, and virtually all were shipped from Japan. The manual was in Japanese only & downloaded the English version which was of no help, but it did say if it was shipped from Japan, it may only be in Japanese, as it is. Now the haggling starts. In short, if you buy it, make sure it is NOT shipped from Japan (as most of them are).", "I highly recommend this camera and am totally baffled by negative reviews.", "As long as it doesn't break I can deal with that.The camera is hard to grip with one hand...always use the lanyard! If you do you will be fine.", "My next high speed video camera purchase will definitely require an adjustable shutter speed feature. Lesson learned.", "This camera is great for science experiments, dog agility, or just having fun. In addition to the high frame rate, the camera also records in full HD.", "This the second Exilim that I bought. The first was in 2007. Liked the small footprint, and features, just to name a few, but this one left the other in the dust. \"Great camera\" does not do it justice.", "I have also used it for general picture taking with good results. I have found the panorama feature both amusing and useful. In all a great little camera.", "The camera works exactly how I expected. I have two friends who have this camera also and they love theirs. I was so glad that Amazon had a few in stock for me. You definitely made my life easier.", "Its best feature is separate buttons for video and photos, no need to change modes just push the shutter release on the top of the camera or the video start on the back. Love this thing.", "This was bought as a gift for my athlete daughter who needed a high speed camera to record her sport and play it back in slo mo to see where she could improve. So far, I've heard only good things about it from her."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,094
|
Yes I took one out for a larger bottle but they take up quite a bit of space U may want a larger cooler if u have more than a few larger bottles . Hope this helps
|
{"question": "Can you take shelves out to allow for larger bottles?", "document": ["Very nice. Cools very good. Will not accept larger bottles without removing shelf.", "Fits anywhere and the two zone feature is great. Larger wine bottles don't fit as comfortably though, so need to move bottles around to fit them in.", "Nice unit. Could use more spacing between the shelves. anything larger than a standard bottle is difficult to store without taking a shelf out to accommodate the larger size. It's a good looking unit and keeps the wine chilled at the proper temp.If I had it to do over I would purchase the next larger size unit. I think it's a 24 bottle size.Cheers! !", "I'm going to echo the general sentiment that other reviewers have shared. This is a nice little wine cooler. I decided on this model for the size, the dual zone feature, and the wooden shelves.The cooler is the perfect size for the amateur wine collector, or for the person that just likes to store wine in the appropriate temperature. I have been a been storing wine bottles from my many wine tours throughout California for some time, and just now decided to get a cooler since I moved and have the room for it.", "This is right in my living room and I barely hear it. Now, there is a little bit of sound, but it's more like the sound a typical fridge makes. Now loud or annoying sounds.Cons: The two major cons are pretty simply explained. 1. The unit is too small for some bottles as mentioned in other posts. I could not store two of my nice bottles of wine because they were too long and I couldn't close the door. However, most of my bottles fit. Only one type did not.Second, the shelves are a little small for the unit, and can easily slip out of the guides.", "most of my standard sized wine bottles don't even fit. champagne bottles? forget it. This item is too cramped and you can't get bottles into it.", "This is obviously not good if you have nice wines in the cooler and the shelf falls. The shelves should be a better fit, but I turn it to the side a bit when pulling it out, and no issues. It's up to you how much this would bother you. Again, this is a cheaper model. You have to expect some imperfections for the lower than normal price.", "Pros: way classier than other dual coolers. Hubbys loves his craft beers in bottom, I live wine in the top. Also has a little lock which is nice since we have little kids., love the wood pull out shelves. Recevied lots of compliments. not very noisy.Cons: Awww...now I have to drink more wine ;)", "we got this cooler about 1 month ago and its worked perfect so far. its quiet and it looks nice. only issue we had, is that it had a little dent in it from shipping.", "Wine from the store is warm. Put the wine in the cooler and it is chilled. What could be easier? Of course there are \"better\" wine coolers that have dual doors and really cool lights. This one works just great."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,095
|
yes it has it. It is awesome you will never regret to get it. I use it in Mexico, even in Mexico it can auto complete the address
|
{"question": "Does it have auto-complete when typing or speaking an address? For example if I start typing a street name will it pull up a list of potential ones?", "document": ["That order was great since the auto-suggested street names were limited to that town/city. Thus, I would just enter a partial street name and the device would display a small list of matching streets almost immediately. No longer. You now must enter the street address first and the device assumes that the street is nearby and starts searching immediately...searching locally before expanding its (lengthy) search. I now find that if I enter an address manually (rather than using Voice Command), I need to interrupt its long-running search to specify the town/city/state regardless.While Voice Command is great, a number of supported commands from prior Nuvi models have been dropped...for no apparent reason...and many others should be considered.", "The system would reset to English for a period of time and then after a few hours -RESET TO SPANISH AGAIN!!! (Image what this was like for two 65-year olds driving down the highway at 70 miles an hour to have their Garmin suddenly start talking in Spanish and displaying Spanish words - not pretty).I usually have pretty good luck with Amazon - but there are just enough negative reviews with this product that I seriously think one of two things is going on: (a) the Garmin name no longer means quality and they have complete idiots doing their programming and absolutely no quality control going on OR (b) Amazon is just reshelving the same crappy returned Garmins and then re-shipping the flawed ones back out again to unsuspecting customers.", "For example if you looked up a restaurant you could pick the number in the list (if there are multiple results) or say the name of the one you want if the result only showed up once in the list. You can start navigation by saying \"yes\" or \"navigate\".If you have a bluetooth-enabled phone you can pair your GPS with the phone and dial numbers or look up people from your phone's directory. The speaker volume is lower than I would prefer but not terrible.For the most part, the places I've asked to get navigation to have been available by default.", "Forget about \"La Cienaga\" - I don't know what she was saying but it wasn't anywhere close! So, if you weren't familiar with the town and it was night time, that could be a bit of a problem. Not a big one - as the street name is also prominently displayed in the window. It is quite strange though, because the spoken commands are understood and responded too very smoothly. Better than my built in navigation system in my BMW. It is a very handy function and I use it often - for example, while driving to work, if I see that I am going to be early, I can ask it for a list of coffee shops, which it finds (ordered by distance to present location) and then, once I have picked one, it will route me to it.", "I bought this along with the South Africa map (micro SIM) to be used in Cape Town.Pros:It's big and looks quite nice.Cons:It's convoluted when navigating the menu.When I used the micro SIM for South Africa and search for street name, it's not possible to search only in South Africa. It's quite annoying. You will get lots of irrelevant results from the US map.When searching for any address, you have to keep typing country and the area. It's a GPS and it should know which country you are in.", "I had to learn to ask, "Where am I", then type in the address I wanted to go to. I do like not having to type in the complete address. I also had to learn that when it asked for the address it only wants the address number and not the street name and then after hitting next, type in the street name. The traffic does not work because it does not come with the needed antenna. If Garmin is going to advertise a function you should be able to use it with out buying an accessory.Although I do like the device very much.", "I like how the screen splits when you come to a freeway divide, to give you a close-up of exactly which lane you need to be in.I had a slight problem with the unit freezing up and not shutting down until the battery ran out; also it wouldn't show my vehicle-pointer on the 3D display, but just stayed in 2D. Usually updating the firmware takes care of that.Otherwise, the lifetime map-traffic feature is priceless, since normally it can be up to $50 to update maps just once, and traffic-reception can cost you a monthly surcharge.I also don't like that you must put in an address by number and street-name, and can't simply list a cross-road intersection.", "Type in street number and name and it quickly searches the entire country for city and state - then gives a list, starting with closest geographically.When using voice command simply state then entire address including city and state. My experience was that Nuvi's results were accurate.This unit shows which lanes to be in in multiple lane situations. This is a great improvement when it works right, but see \"The Ugly\" below.It finds satellites much more quickly than the older unit.New entry after thirty days: It appears to be learning.", "Enter the state and it gives you a lame list of irrelevant cities. So enter a city in the wrong state and you will then be stuck typing the city AND state. Abbreviate the state name to 2 letters or you may have to type most of that in too.WATCH OUT for the SIMULATED GPS! If it is set it may not allow you to unset it and you will have to search Google to find the SECRET DEMO MODE hidden somewhere in a developer mode...I set it all up in my car and left it off.", "Disconnect nuvi from USB- From nuvi tap APP - TRIP PLANNER and you will see your file name thereOnce selected and GO, nuvi will ask which SP do you want to go to and shows the list of all SP based on the order that it was created from MAP QUEST- 5\" screen is very good. Although I am already used to the size from 1450 but 2595 is better as it can be set for Landscape or Portrait display (no. . . no . . it does not have the auto adjust like smartphone."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,101
|
If you really want two of them in that space you could put a board on your shelf and put the one that is going to hang over the shelf on the board. You would want your board to be as long as your organizer, so both feet are sitting on it, for stability. If you are crafty and/ or handy you could paint the board, or cover it with contact paper, if you don't care you would just want to sand it down to be sure it was smooth and there were no splinters. Either of the big DIY places will cut wood down to the size you want it, for a small fee. Your organizers won't be even, if that bothers you, you can put another board under the organizer on the shelf. I know this is months after you asked, but when I saw your question this popped in my head and I thought it might help if you haven't come up with a solution yet.
|
{"question": "Could I put two of these side by side n my pantry shelf which is 33 inches wide? There is space for it to hang off the side but would it be stable?", "document": ["This item wolud have been great if the shelves were all the same width. I could have used it with only two shelves but I paid for three and expected to be able to use three. I forced the third shelf into the side brackets but that snapped the spacers out of shelves.I returned it and got a prompt refund.I would love to have two of these for my cabinets but at this price I cannot afford to hire a welder to modify the shelves to fit.", "This is a super heavy duty rack which is larger than I expected. The photo shows it holding 3 cans wide, but there is room leftover. I would guess you could put 3 28 oz cans side by side. It also holds 4 deep of regular 15oz cans and 3 deep of 28oz cans. There are 6 guidebars which can be attached anywhere to keep your cans rolling straight.I have this sitting on wire shelving and something to note is that it must have a solid surface to sit on. Fortunately, the box it comes in is nearly the right size and with slight trimming, it fits perfectly under it.", "This is a great item for storing cans, jars, etc. Easy to assemble and holds more items than I expected. Two of them fit perfecty sideby-side on the 36" wide Whitmore stainless shelves I bought. Very versatile and functional with plastic dividers for each row if desired. Holds all types of cans, including tuna fish cans which I placed at the end of the row. Sturdy enough to double stack cans on top shelf. Very pleased. Great for standard size bottled sauces (pasta sause, pizza sause, and like.)", "I just put 7 of these together (all by myself) and had NO problems. The frame even has arrows on it that say "this side up and put these arrows on the inside of the frame. It sometimes took a little patience and fiddling to get all 4 shelf hooks to go on at the same time (make one wish they had another hand) but after the first one all the rest were easy.The shelves hold a variety of can sizes. They will even hold a large spaghetti sauce can and 2 regular sized cans on the same shelf (across the shelf) I do wish that they included a couple extra of the plastic can separators for use with the littler cans like the ones for tomato sauce or green chilisThese racks have really added space and organization to my pantry!", "We recently remodeled and now I have a large pantry, I ordered only one originally just to see how it would work. These are GREAT for organizing my pantry! I ended up ordering one more and I'm contemplating yet another one. Very easy to see what cans you have and stores many in a smaller space than just placing them on the shelf. The only issue I had with them is they are a little taxing to put together, especially once you are trying to place the last shelf, fits VERY tight and hard to maneuver the pieces into place.", "I purchased this thinking (and hoping) that it might help in my pantry to give me a little more space and help organize my canned foods. Unfortunately, it did neither.Each shelf will only hold 36 cans. 4 cans in each of the 3 sections and 3 shelves. In the amount of space it consumes I can fit probably twice that many. Stacked of course. And with all of that wasted space, I now had to find room for the items that can no longer fit on the rack due to the space limitations.It doesn't really help with keeping the newer item in front either since you would need access to the back to put the newer items in the back.", "I had measured my shelf space exactly (13.4 inches height). On the product description, is states the dimensions as 13.25 inches tall. They are NOT!! They are 13.5 inches tall. And, that's not even including the extra height the cans are going to create. Wish I had never purchased them!", "You can only put 4 standard size cans per row. If you have shallow cabinets this might be perfect, but for those with deeper cabinets you will have a lot of space behind this organizer. It would be great if they made another size that was deeper and could hold more than 4 cans per row.Check the dimensions before ordering to make sure it will be a good fit for your space.", "The wings come folded on one side but due to the way the shelf was designed you have to flip the wings over to the other side.I'll post a picture of how the shelf should be assembled.=== 12/7/13 ===Had trouble assembling this product and customer service responded right away. Will try new instructions.=== 12/7/13 ===(see my uploaded image - note that in the image uploaded by SimHead82, the guides also did not reach the front of the shelves)I ordered 2 of these racks, hoping that I could stack one on top of the other.", "We have a large pull out pantry where we keep many items including canned foods. My Wife has a method of adding groceries akin to simply finding a space and cramming the can or box in. It was a mess. We ended up being out of foods we needed (like canned chicken stock), and having way more cans of stuff we only use occasionally (like garbanzo beans). The Can Rack Organizers saved our sanity and budget! We purchased two of them and they just fit on the shelf. After about one hour of reorganizing, we can now easily see what we have, what we need that should be on the grocery list, and we actually have way more room in the pantry."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,126
|
Yes the nex5 lenses will fit the camera but the image quality will be lower. I have the E PZ 16-50mm F3.5-5.6 Zoom Lens and it works good with the A7, but the IQ is not the same. The Sony a7 is a full frame camera, and the nex lenses are not full frame. To get better pictures it´s better to get full frame lenses.
|
{"question": "Will my e-mount lenses for my nex5 and alpha 6000 fit this camera? And is there a cropped image?", "document": ["And the main front and back dials can be swapped between aperture and shutter speed. The rear click wheel is customizable, but I think the default of ISO is the best.LENSES – NON-SONY: The wonderful thing about the mirrorless camera is that the film plane is much closer to the lens mount than the SLRs. This means that you can fit an adapter in there and run old SLR lenses exactly how they were meant to be (i.e. the distance to the sensor is the same as the lens makers designed the lens for).", "I returned that lens and got the Tamron 18-200 diIII lens. The in-lens stabilization is NOT disabled here. Image quality is NOT perfect nor tack sharp at 100% magnification. It is good at normal magnification. It is not very good indoors as it has slower glass. It does a good; although not perfect; job outdoors. I would recommend this solution while we wait for a full frame e-mount solution from Sony. The Tamron lens is about the same size as the FE24-70 kit lens that came with the camera; so it is very good from a portable standard.", "I think they were a little lazy in the design. Looks like an alpha lens stuck on a nex (there is no nex vs alpha, but this is obviously a nex mount). There is almost a 1\" shim space between the mount and rear element. Lecia has short/ compact lenses on their camera, this a milc too. There are lens distortion with this kit lens, so I turn on the lens correction in Lightroom.+ Like Nikon, I can use aps-c lens on a full frame.", "I did buy this camera for the lightness and compactness, after all, and slapping an all-metal DSLR lens on the front kind of negates that benefit.A lot of people are currently testing the gamut of legacy lenses on this camera with more rigor than I have; you can find links to those tests on the Sony Alpha rumors website or do Google and Flickr searches if you're curious about how a particular lens plays with this camera. For my part, I'm both excited and financially terrified at the prospect of getting more M-mount lenses to use with the A7.", "It's easy to carry with me, I get pro results, it's rock solid, ultra configurable to the way I want to shoot, etc. We're having fun now.UPDATE: I was so impressed with the leap in IQ from the Alpha A-mount lenses that I purchased the LA-EA4 adaptor. This is the adaptor you want ... fast AF and actually much smaller looking and feeling than what the pictures of it on the camera would seem to indicate. If fact, I am so impressed by the auto focusing response and lightness of the unit that I decided to simply make the A-mounts my lens collection.", "It can take virtually any lens. ANY LENS! It can AF (and auto aperture) with any Sony, Minolta, and many Canon autofocus lenses. That's A mount, E mount, FE mount, and EF mount. Wowzers! As with most mirrorless bodies, you can forgo autofocus and aperture and mount many more lenses, so that opens up the rest of the lenses out there. The fact that full frame lenses keep their relative focal lengths is a huge plus, and lenses designed for cropped sensors still benefit from a 10MP cropped mode (which you can override--another plus).", "Focus is also accurate and quick.Conclusion: If you need perfect quality get a Zeiss prime lens. If you need portability and are willing to sacrifice a little quality the Tamron 18-200 diIII lens is a good choice while we wait for another Sony alternative. I do NOT know why Sony has disabled OSS in most of their e-mount in-lens stabilizated lenses when mounted on an A7, but Sony has. Sony has confirmed this with an e-mail to me.", "By the time I got focus, the deer would be gone into the trees.3. Use Sony E-mount lenses. Here I have to deal with the crop factor (images are 3936x2624 pixels; plenty for my purposes). I decided to sacrifice a little quality for travel convenience. First I tried the Sony 18-200 LE lens. Sony has disabled the in-lens stabilization in this lens and have done this for almost all for their e-mount lens when used on an A7! This is not good for shooting hand held at 200mm.", "I didn't find this a problem for the most part as it does shoot well in low light situations but chances are you will need to get one sooner or later. The Sony HVLF20M external flash comes in at around the $150 mark.Sony is investing heavily in its e-mount adapter and as such all the new cameras Sony has recently announced take e-mount lenses including the A7 series. There are two types of E-mount lenses, the older NEX style which are APS-C and the newer FE full frame E-mount lenses.", "It is too large to appeal to pocketcam fans, way too expensive to match the super-zoom bridge cameras on price, about 3X as expensive as popular enthusiast DSLR's with kit lenses and all-around lacks almost everything a pro photographer looks for, particularly ruggedness and easy access to a wide variety of industry-standard lens mounts and other accessories. Yet it is being cited time and again as one of the most exciting cameras of the era and for good reason. My assessment (backed by Sony) is that the A7 is directed at someone who is serious about image quality and willing to give up things like fast burst shooting, ultra-fast auto focusing, i.e."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,145
|
Hi Sarah,Yes, the back leg swings out to prop up the book stand and folds back to close up. The ledge which your book would be propped on does not collaspes; it is stationary. This is a really beautiful cookbook stand and I'm glad I purchased it. Hope this helps!
|
{"question": "Does this stand fold up at all?", "document": ["Received this recently as a gift and I love it. It is cuter that some of the plain wood ones I'd looked at and looks nice left on the counter. The back of the stand does fold up which makes it a little smaller if you want to store it.", "This item is a nice way to give your kitchen a different look. I love to cook and have been using a clothspin to hold up my recipes on a a door handle, or just laying the cookbook on a wet sink. I have actually wanted something like this for a long time, and I really like the sturdiness and design of it. The color I would imagine would fit into most styles of kitchens: mine is more traditional. You can fold it up if you like, but I leave mine on display all the time with a cookbook on it.", "What you see is what you get! Awesome stand and just the right size, too! I have received many complements on this stand.", "Love this stand to put my books in.Got the page you want all the time and its easier to read in the stand.", "A nice stand to hold open your cookbook. I like it and recommend it. Very useful for me when cooking.", "I purchased the cookbook stand for my mom and she loved it! The price was much cheaper than QVC and other large retailers.", "I love this cook book stand! It keeps your book in place and will not fall over. Looks really pretty too!", "I like this stand. It holds the cookbook open and keeps it off the counter if there are spills. It is sturdy. It only tips over when there is no book on it.", "thi s was Christmas gift for my boyfriend and he loves it..He does a lot of cooking and baking.the stand is very strong to hold a cook book..", "Nice cookbook stand. Might tip over if the book is too large, but it's very attractive and nice in my kitchen. I am very happy with the purchase."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,164
|
Once I dump the water that collects in the sink, I usually either pat it dry with a towel, or hang it on a hook to dry. It dries quickly.
|
{"question": "How do you dry the mat once your dishes are dry? Thanks!", "document": ["I suppose there's not much to write about a large silicon drying matt, but OXO does it again with a high quality item. It looks nice and does exactly what you need it to do. Hard to argue with something that works as intended. Wine glasses dry quickly and spot free thanks to the design of the ribbing.", "Wonderful item!! I had seen a similar item in Target but it was too expensive. So I was searching online and spotted this drying mat and said to myself " order this mat" The price was great and the delivery service.Thanks", "Overall, another wonderful product by OXO and I am so impressed. Thanks, OXO!", "This is an awesome mat to use instead of cloths for letting dishes air dry. It drys faster and your items will not smell like a wet cloth after. Very nice, highly recommend.", "this thing looks so much better than a towel or microfiber drying mat. It doesn't hold smell because it's made of silicone. I can wash a decent number of dishes and dry them on here. Glasses stand upright fine on the mat. No issues! Highly recommended.", "With limited counter space I was using dish towels toplace washed dishes on - cups would not dry - smelled.Ordered the silicone drying mat - really like it !! Wish itwas a bit larger but it works great. Glad we purchasedthis.", "Works great for drying miscellaneous items. We have a dishwasher but there are some items I need daily and have to hand wash. This mat allows us to not have a bulky drying rack but still dry the dishes we need to use more often. It's also dishwasher safe so it's easy to clean.", "This mat stays put on the counter because of the silicone it's made from. The grooves are nice and deep so it can catch lots and lots of water run-off without filling up. It is easy to dump it into the sink after putting away dry dishes, and can be draped upside-down over our empty dish drain to dry out completely between uses.", "Wish the mat was bigger, but it does help with drying out my cups and dishes a lot better than the fabric ones. I do notice the dry water marks but it's not a big deal to me. I like that nothing slides off it and it doesn't slide on the counter top either. I kept the little hook that was attached to it and use it to hang it when not in use.", "I like this mat as they save space physically and visually. Yet compare to the microfiber drying mat, the dishes don't dry as fast, but the microfiber one tends to get dirty faster.I have both of them now. I leave this one out most of the time and use the microfiber when I have a lot of stuff to dry.Overall a decent product."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,223
|
My remote did not work, but it was no big deal to me because I used this receiver for an ice chest radio. If you're looking for something for your boat, I would recommend the Boss MR 1620. This receiver comes with a wired remote. This is the model I bought off of Amazon for my boat in which I never have to use the buttons on the receiver itself; only use the remote. I have had this receiver for about 3 years now with no problems.
|
{"question": "It mentions a remote. How well does that work and does this unit allow the installation of a hardwired remote that could put on the back of my boat?", "document": ["bought this to put in the boat because of the low price. good little unit so far. sound is good. haven't had it long enough to know whether it will last but so far so good.", "Boss Audio MR1315WUA Marine MP3-Compatible Digital Media ReceiverHad to replace another receiver in my boat that the saltwater destroyed. This one is holding up well and seems to have a lot of power.", "The sound from this receiver is fine but the light on the screen to illuminate the tuner,volume, etc, does not work. Considering in brought this to the Bahamas to use on my boat I guess I will live with this great example of Chinese quality.", "Can't see the screen at all. Got the radio mounted up in the T-Top radio box on the boat and have to stand on my tip toes to see anything. Screen is black. Don't see anything in the instructions about adjusting screen brightness. Well I basically use it with my iPod since I hate commercial radio. and I've got several thousand songs on the thing.", "Great features and good sound for the price. I like the idea of a mechless stereo on a boat considering the beating it can take on a choppy lake. The stereo had no problems reading songs off a SD card and a USB stick. Amazingly, I put 220 songs on a 1 Gb SD card so that will provide many hours of music on my boat. At higher volumes, the sound remains clear and crisp coming out of my Boss 5.25 inch speakers. I don't get thunderous bass out of this receiver/speaker combination but it is more than adequate for me.", "Wasted one whole day.... Only to find out they won't take the radio back....", "Has all the features I wanted...SD capability, USB port and I-Touch hook ups. Good FM reception and nice remote. Has plenty of power with 250 watts.", "Replaced the crappy Pyle indash that the previous owner installed in my pontoon. Now the sound cuts out at higher volume. Not the stereo's fault, I'm sure it's just crappy speaker wire as the speakers are 100 watts. This stereo just has too much power! But I'm not complaining, I'll just run higher gauge speaker wires which should fix the problem. Very nice unit for the money!", "So far this has been a pretty decent radio. I can't say much for the power because I have it going through an amp. I like that fact that it is all rubberized and water resistant. I've tested it with USB and iPod and they both work fine. I mainly bought it for the SD card which is real nice because it fits in flush and you can close the cover over it keeping water out.. You can hear a bit of noise or static when switching tracks or between songs. But not that noticeable when you are out on the lake.", "Nice looking radio, all the bells and whistles. It took me two months to get up enough nerve to tear into my dashboard to replace the old radio, then 3 1/2 hours to actually get to the old radio. Another 2 hours to remove the old radio and install the new radio. Only to find it had no sound. Then an hour and a half to re-install the old one after spending an hour fixing the old radios plug. Then two more hours putting the dash back together. WOW, I have the same radio I started with and you can't even tell I had the dash all apart."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,253
|
I wouldn't use it for that purpose. I would be more inclined to buy Avery small crockpot for that purpose. This griddle is just for cooking.
|
{"question": "Would this item be suitable as a warming tray? For instance, to set an oven-safe dish of bean dip on for a buffet?", "document": ["Upon receipt I decided to test the item for functionality.I set the thermostat at 250 degrees and monitored the surface temperature using an infrared thermometer.The temperature rapidly shot up to over 400 degrees before the thermostat kicked in and started lowering the temperature.It came down to about 350 degrees when the thermostat came on and started to increase the heat again.At that point I didn't even try to cook anything with it, and just packed it up for return shipping.", "This griddle is just right for two people. It is light, accurate as to temperature, easy to clean. I would reccommend this item to anyone. Much more accurate than fry pan.", "Bought this item to use when we go camping. Thought it would be just the right size for the two of us. I was very pleased with the overall look and performance. This will work just fine for us!", "I purchased this for the sole purpose of making grilled cheese sandwiches, which I have never been able to make right in a skillet. It works great for that, so great that I have found several other uses for it. My only complaint is the lack of clear markings on the thermostat. One has to kind of guess as to exactly where it is set. I would recommend for anyone who lives alone and has no need of a bigger appliance.", "Received this as Christmas gift, and I love it. It is perfect for making pancakes. Makes about four small ones at a time.The best feature is that it can be placed in the dish washer. I would recommend this griddle for anyone that is lookingfor a small griddle, that is great for both pancakes or grilled sandwiches.", "I have been using the Liddle Griddle for years, in fact, I have purchased my second one recently. I decided that it would make a good wedding gift, so purchased one for the bride and groom.I use mine at least once a week - and sometimes more often. It is a great product for cooking for two. Just enough griddle space for pancaks for two, or other breakfast item. A FIVE star product!", "I have owned this griddle for over 3 years now and it works as well now as it did when I bought it! It's even $5 less now than it was when I bought it. I would buy another one of these if it ever broke.Great size for making pancakes. Grilled cheese sandwiches come out perfect every time, as do pancakes. Before I bought this griddle I used to use a pan on the stove, the first pancake or grilled cheese sandwich never turned out good in a pan. This griddle allows you to set the temperature and everything I have cooked on it has turned out really nice.", "I use this little grill for wax painting. I looked at "official" wax warmers, saw larger regular grills in wax painting start up kits and decided to try this one. It is perfect. Large enough to set lots of tins on, small enough to fit in my limited space. Easy to wipe off wax from surface. I am sure it would be good as a cooking grill too, though I haven't used it for such. The only thing I would change is I would like a longer cord, but most small appliances have short cords, so that is just a little wish.", "....perfect for my quick little single meals! Easy clean up and very durable coating. True to temp controller. Dishwasher safe...", "This is a good size for my husband and I. Only thing wrong is the cord location makes it so I have to use it in a different position. But it is a good product. Live the ease of dishwasher safe."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,258
|
It's more silver and gray. They're very neutral, you won't notice it. They're not super shiny or anything, and the sides are a medium gray i think. I use them for my little tv, my laptop, and anything else you can plug headphones into; they're great! Jim
|
{"question": "Is the color of the speakers silver only or black and silver?", "document": ["Was told these only work with computers, but I always check things out for myself and RCA plugs are pretty hard to miss. This is the second set of speakers I bought to make sound clearer in a den that has a nice, older TV with side-mounted \"surround sound\" (ya right) speakers. First set was just a pure embarrassment that went right back to the store the next day.These look civilized, not like a black and silver plastic toy factory blew up. Nice and heavy so they stay where you put them.", "My HP G71 Notebook is great except that it lacks good internal speakers. To compensate for this, I went with these Bose Companion 2 Series 2 speakers based upon the Bose name. My desktop is crammed with accessories and I did not want to have to make room for a big subwoofer unit. These speakers are small, nice looking, and happily, they match the silver-and-black styling of my HP Notebook computer. They look great on my desktop.Fortunately, these speakers produce wonderful sounding bass (as well as treble and midrange) with no subwoofer.", "We had old Bose speakers, and used them all the time. After awhile they started to get beat up, so we purchased these. They are high quality at a reasonable price, and they look a little sleeker than the black ones we had before.", "Sounds very good. Small footprint and looks good too. Has on-off and volume switch. Recommend this over the older version (black) that is being sold in Costco. Seriously consider it for the price.", "The volume dial feels very nice and solid and has a very fluid motion to it. The silver grills also look great.Sound:When watching YouTube videos, I really was not impressed. This is probably because online music and videos have all types of compression and that's just the nature of it and you can't do much about it. When I started listening to my mp3's, that's when these speakers came to life. The sound is clear and I don't know how they designed them, but they produce bass. Obviously, not thunderous bass but they do sound much bigger than they really are.", "If you want something better go with the Bose Computer MusicMonitor's if you want to stick with Bose's, although you'll be paying an arm and a leg ($299!! ), but they sound awesome. If you like listening to music don't bother with these speakers as you will spent time configuring the bass and treble to nominal values which results in no bass and bad treble noise. If you can spare $200 go with Audioengine 2 - PC multimedia speakers, which are rated the best in the market today. Happy shopping.Audioengine 2 - PC multimedia speakers - 30 Watt (total) - 2-way - satin black", "When I opened the box, everything was packaged as if it had NEVER been opened before, and the speakers didn't show any signs of being used. No scuffs, no worn-out knobs, nada.I lived in a college dorm and these speakers were PERFECT for the situation. They weren't large, they had no huge bumbling subwoofer that took up extra space, they're low profile - it's easy to move it around when you need it to. The color scheme matched my MacBook Pro, which was aesthetically pleasing and improved the zen in my shared room.", "I'm not an audiophile, and rarely play CDs, and MP3s using my computer. But, I do listen to a lot of programs over the internet, and these speakers are great for that. Spoken words are very clear, back ground noises are discernible, but not distracting, and subtle modulations in tone give new color to speech. What music I have listened to sounds good, but I generally use my stereo system for that. I don't have much room for computer speakers either, and these are a perfect fit.", "This is my first ever Bose speakers and now I understand why Bose is so highly recommended. I mainly use it for my iPhone or iPad to play pandora or watch movies in the master bedroom. The quality of the sound is exceptionally good, even when turned up to the max, the speakers doesn't sound like its going to explode like the lower quality brands or models. It remains clear and sound just as good like when playing at lower volume. Size of the speakers seems larger than advertised on photo but the well made sturdy casing follow by a beautiful silver-like finish, and an elegant modern design, making these pair of speakers not only able to produce high quality sounds but looks great doing it.The only improvement I'd like is stronger base, but then that means I should be looking at another class model.", "Bose is probably the most recognizable name in the sound industry.The company has been labeled by some to be \"overrated\" and others too expensive.But the majority(not always right) agrees that Bose is the best audio provider.Like i stated before,Bose is most of time expensive but I ask you to please consider what Bose speakers are usually made for-People that are willingly to pay to fill their good tastes in sound.Bose even says it on their mission statement:\"This isnt for the novice (people who want booming speakers and high sound)but for the experienced listener who appreciates the finer points in music.And thats what these speakers accomplish in my opinion.DESIGN:These speakers are made for your Pc,Laptop,tablet or even your phone.You attach them in the headphones jack on all of your devices.They are very easy to setup:connect left speaker to right speaker with one cord and connect the red and white jacks to the speaker and then to the headphones jack on your device.They are sleek and have a beautiful grey color them.The speaker itself has a headphone jack which goes well with Bose headphones which you also can find on Amazon ranging from $150 to $350.Anyway,they are very portable and look very nice.Overall on Design:4/4.SOUND:The most important thing when talking about speakers,give me a speaker that looks like Hillary Clinton but if it has great sound I will take it.Like other Bose devices they never have high sound its a deep bass driven speaker that can allow you to pin point each instrument in the song:bass,percussion,back vocal singers,drums etc.whatever music you listen to these speakers will give you a great experience and maybe a new experience if this is the first time youve used Bose.But the one con I found in the sound was that if you arent listening to anything but leave them on,you might catch radio signals:Police,Fm or Am bands,or whatever other communications are in your area.Or you might get a sharp haze that might annoy you.Overall on Sound;3 and a half/4.PRICE:This is too arbitrary to actually be discussed because people all have different budgets and opinions on what a price should be for any item.But speaking for myself these speakers are affordable and well worth the money.Price:4/4Pros on Everything:Price,mobility,the versatility of the speaker to connect to any device with a headphone jack,sleek non-space consuming design,easy to setup,and of course,the rich deep sound not high but just high enough to be great.Cons:Might catch radio signals around your area when not listening to anything on them but you've left them on and will play some outside communications on them.Or a high whine or a consistent repetition of \"beeping\" sounds may come out of the left speaker when you leave it on.Overall;A great speaker for a good price.Would I buy it again?Yes.Thanks for reading."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,262
|
Yes, I that is exactly how l use them, I still angle them some from the upper corner to the lower corner but I use them to pull in on the bottom fitted sheet which is too deep for my matters
|
{"question": "Can I use these to go across the width of the bed as our matress pad and sheets are too loose in that direction?", "document": ["This product has finally solved a difficult problem - keeping the sheets & mattress pad in place on my adjustable bed. I have a double-sided "pillow top" mattress that is quite thick. Fitted sheets and the fitted mattress pad barely reach to the under side of the mattress. Those straps that go across the corners are fine UNTIL I raise the head of my bed. Then the corner straps slip right off. This criss-cross design, however, works perfectly! The plastic molded clamps are robust and hold the sheet and mattress pad very firmly.", "I ordered these suspenders because my fitted sheets were always pulled up by the morning. They did the job! They are very well made and never come undone on their own.They go corner-to-corner, but I wish they made them to go across the sheets too.", "One of those spontaneous purchases I have made sight unseen. And once in a while in doing so, you land on pure brilliance! And these sheet suspenders are exactly that. A simple, yet very ingenious idea that does exactly what it claims. I LOVE these things. Shipping was right on time. Simple packaging, simple to use...yet wish these had been around years ago. No more slipping sheets. Use these right, and I guarantee you will never have to worry about a sheet or sheet style bed protector ever coming loose again!", "You get two suspenders to a pack, which is perfect. We use one for the flat sheet, and one for the blanket. They are adjustable, so we just put both suspenders straight across underneath the bed. The mouth of the clips have not snagged or damaged even our most delicate sheets or duvets. The mouth of the clip is large enough to grasp a bit of the duvet and a bit of the comforter inside, yet, it still grips the thin sheet as well. The clips are have a slim profile so you don't really see them when the bed is made.", "kind of a pain to put on when making bed but totally worth it for me, I use 2 sets of these one for my fitted sheet, and one for my mattress pad, they have never stayed down better, if you have problems keeping your bed made because you move around too much in your sleep.. this is the solution", "I decided to go with this style for a couple reasons. 1st, great reviews. 2nd, they go from one end to the other of the mattress. So in my opinion there are 2 types of problems with sheets coming off or bunching up. 1st way the corners come off. 2nd way, the center of each side and center of the top and bottom kind of pull up. In this case the corners do stay on but cause the sheets to bunch up under you which is annoying. Ok, so I bought 1 pair knowing I wasn't going to use them the way they demonstrate in the picture.", "For these, I do use the clasps - clamp them down and they hold tenaciously. The fact that they go all the way under the mattress means they hold better than any other fix I've tried.. no well-dressed mattress should be without its suspenders.", "These suspenders have been on our bed for about a week now. and are working perfectly. We have a temperpedic adjustable bed . Between the up and down motion and our weight on the sheets, the bottom sheet was constantly coming off at the corners. They wouldn't stay on no matter what we tried. I came across these here on Amazon and we are 100% satisfied. So far so good.", "Before these sheet suspenders I didn't know what to do. I would try to go to sleep and the sheets would attack me. Once they managed to break free from their corner cages, they swallowed my legs and slowly tried to consume my face. Instead of looking under my bed to check for monsters, I was checking under the flat sheet to make sure the fitted sheet was properly restrained. Now, with this awesome invention, I can rest assured the monsters will not escape. The fitted sheet has been tamed. Install took minutes.", "There is only one thing my wife and I really fight over, the sheets! I've tried so many of the units that just grab the corners individually buy they never hold. This solved my problem. My tiny wife can flop around the bed like a fish out of water and she still can get the sheets to come loose. Domestic bliss is back."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,268
|
No. Just the ribbon. Your best bet would be to improvise with a hot glue gun or something to that effect
|
{"question": "Does the keyboard ribbon also have the latch with it? I broke my ribbon latch and my keyboard won't work.", "document": ["Laptop compatibility:I was worried the keyboard wouldn't fit my specific model of 1545 (e.g. PP41L), I spoke with a computer repair technician at a local place and he said "most" of the time a 1545 model keyboard should work for all models of 1545 Inspiron laptops. So I tried it and it worked great, all the tabs aligned, the ribbon fit, and there was a snug fit between it and the baseRepair Notes:I did the repair myself and it didn't take long at all.", "However I was a little confused by the ribbon clip. I had read a lot to be careful with it so I was simply trying to place the ribbon on top and snap it in, however you have to insert the ribbon a little bit into the fitting in order for it to work correctly and stay put (hard to describe).Reasoning for 4 out 5 stars: I only liked it, there was nothing great about the product that made me "love it" . It did what I needed it to do, replace a broken keyboard, and that's it.", "It looks like the original, but this is not as black as the original. The keys work fine and spring feels like the original, although space bar feels little sloppy compared to the original. The connector ribbon in the original is folded sharply so that it is out of the way of the space bar. The replacement's ribbon must be pulled away from the space bar as the keyboard bottom tabs are inserted into their slots. Dell and others (Newegg, Tigerdirect, etc) don't have replacement keyboard for Inspiron 1545. I was happy enough to find it in Amazon and paid extra for expedited shipping.11/21/12 edit: The space bar is fine.", "It's not hard, some force is needed, just be careful. Also, know that the ribbon cable is held in place by a small top cover which will hinge up to release the cable itself. Firmly seat the (new) cable till it bottoms out in the connector then secure it in place by closing the connector's hinge. Then reverse the order and you will be typing your own review in no time at all. Start to finish was less than 10 min.This is a solid product at and unbelievable price.", "So, pay attention to which pair goes where upon removal, to make their replacement a snap. Use a magnetized small Phillip's screwdriver, if at all possible, to hold on to the screws. Be very very careful not to drop the interior screws down in to the open computer or they will surely be lost.The Keyboard Ribbon Attachment Clip: Or Keyboard Cable Connector Latch. Or Motherboard Connector. One of the videos I watched said to be very careful not to break this clip, as it is not repairable. The clip sits atop the motherboard and holds the cable ribbon from the back of the keyboard in place.", "I broke a couple of keys by spilling water on my laptop, and bought this to fix it. It worked great and you can't tell it is a replacement keyboard at all", "I love my computer so when my new keyboard was installed I was tickled to be able to use it again, only problem is a few of the keys broke in the first week of using it again.", "I bought this for a Dell 1520. It is so much easier to replace the key board than the two keys that broke off on the old keyboard. It's so easy I let my 12 yr old son install it. I had a replacement keyboard before this one and the letters and numbers wore off of the keys so I'll have to let you know if this one holds up.", "This feels exactly like the original Dell keyboard. I haven't got 1 thing negative to say about it. Also it arrived extremely quick!", "The replacement keyboard worked like a charm. Reconnecting the ribbon to the motherboard proved a bit tricky but once I got that done; no problems."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,339
|
It takes an 8GB card shown on Amazon. I bought it separate---called Transcend. It fits into the camera beside the battery. When you want prints, you take the small card out and take it to any store (I took mine to a Meijer store to the camera section where it can be used to print your photos---Rite-Aide, Wal-Mart, etc. all have a place to make prints) Also, the cord that comes with it attaches to a computer and you can download the photos to your computer to save. I hope that answers your question. I really like the camera---took it to Italy with me.
|
{"question": "How can you print or save pix from this camera?", "document": ["The price was unbeatable for the performance this camera offers. Takes wonderful pictures. The color I probably wouldn't have chosen but I did save over $20.00 and that was worth it.", "I got some really great photos out of this from my trip, but I can't help but wish that, while more cumbersome, I would have just taken my Nikon D-SLR.You might ask why I didn't, if I had one available to me. The issue was to save space. I was traveling with one suitcase and one carry-on. I couldn't squeeze in a large camera with alternating lenses. If I had really had the time to figure out how best to use this camera, I feel I would be happier with it.", "Sorry, I found this to be the worst digital camera I've ever owned. At the store I could scroll through menus but not take pix, so I didn't know what I was getting. It's a nice size and weight, and the controls are easy to navigate and do a good job of explaining what's what. Unfortunately the preset settings are almost always off. iAuto never works correctly and the shots are often washed out or too dark. Trying to choose a scene mode is frustrating; it's a point and shoot trial and error guessing game.", "All in all, this is a wonderful camera.", "Very nice camera recommend highly", "Only a point and shoot camera for the student or kids or grand parents that are not in to photography.", "It is a very nice camera and it was in a reasonable price. The video is ok but the pictures are very good.", "This camera has performed very well, but as with most digital cameras, the menu system leaves a lot to be desired.", "I am happy with the pictures. It takes awhile to learn every thing, but all in all a great camera.", "i just received this camera today. it is a very user freandly camera. i am very experienced in Film photography. this camera is the best!!!!!!!!!! !"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,348
|
Yes , it has three different setting 16:9 being one... Great buy.
|
{"question": "Can I buy a portable 16:9 aspect ratio projector screen for this or do I have to buy a 16:10 screen?", "document": ["I have played the Blu ray that is mighty amazing. Normal DVD is also not bad. You-tube videos also produce good quality result (more than what I initially thought). Connected to computer using VGA and the video result was again more than I expected. Again it's a 170 inch screen and I'm not talking about a 100 inch screen (which itself is quite big) but no comparison when it goes beyond 150.4) 16:10 aspect ratio - Although I don't understand why this projector comes in this aspect ratio as most of the images are in 16:9 or even smaller, however, this didn't give any problems.", "As the centerpiece of a small windowless room home theater, this projector is a fine choice. It is connected via HDMI cable (not provided) to a Panasonic Blu-Ray 3D Player, Sharp Sound Bar, Polk Audio 10 in. subwoofer and an Elite 80 in.16:9 pull down screen. The total cost for this entire home theater was just under $1,000, all purchased on Amazon. The projector is set up only 10 feet from the screen, which results in a very sharp 70 in display utilizing the projector's native16:9 widescreen aspect ratio at 720p resolution.", "I have played blu ray with excellent results.6) Difference with Viewsonic PJD5134: I purchased 5134 earlier and used it for 2 days, but decided to go for 5533W for the following reasons:a) 800x1200 vs 1280x800 resolution - This is a massive difference and easily identifiable i.e. far more than a 1080P vs 720P. Technically speaking, with PJD5134, you are using 360,000 vs 870,000 pixels (2.41667 times more). The calculation assumes that a 16:9 aspect ration movie is played so with PJD 5134 (4:3 aspect ratio), you have massive black lines on top and bottom hence loosing 120,000 view-able pixels.b) 4:3 vs 16:10 aspect ratio: Massive difference as some of it I have already explained in \"a\" above.", "Secondly, to create a 100 inch viewable image of 16:9 aspect ration, you have to project about a 140inch screen approximately. This is a massive drawback.c) Screen to projector distance - To create a same size image, you have to put 5134 way back than the 5533W, so if you have a comparitively smaller room, you would loose significant amount of screen size (considering both aspect ratio and throw distance) I can provide more details however this would go on and on. The bottom line is go for 5533W (in comparison with 5134) without any second thought.", "I searched forums and reviews for weeks prior to making the purchase of the VeiwSonic PJD5533W WXGA portable projector. I have several LCD's inside the home some 780 and others 1080.This projector is every bit as clears as my other LCD's. As all projectors it must be dark outside before you can use it but don't want to watch movies outside during the day nonetheless no TV looks great with the sun directly on it.I am projecting on a 16:9 ratio 5' x 9' screen from Carl's screens \"the best\" for quality and price.", "Overall this projector met my expectations. The projector is meant for data, but in my setup I use it for Movies and TV and it performs great! Picture is fairly good for only being a native 720P. The 3D is great! I would recommend this projector to a friend.Pros-Great price.3D Blu Rays look great! Detects 3D signal automatically.Very bright picture.Fairly small and light makes it easy to mount on ceiling or carry.Good colors.Cons-Lens shift is missing. Makes for difficult set up when ceiling mounting do to the fact that it has to be straight in front of the screen.Zoom is mediocre.It would be nice if the screen ratio was a native 16:9 instead of 16:10.Built quality is not the best.If you are looking for a first projector or upgrading an old projector consider this projector.", "I could not adjust the sharpness or color even thou the options are there, but they are grayed out. Very irritating to say the least. Once adjusted I was able to save the settings and they would stay, but the aspect ratio always changes. I had set it to 16 by 9 to mimic the TV, but it always changes back to Auto. I have not found a way to keep it set the same, also the picture that I set changes with each signal source. So my PS3 will be fine, but my Direct TV will not have the same settings, even if I saved it to User 1.", "I haven't tried the 3d option but intend to in the near future.Brightness: Obviously projectors look best in a dark room, but this projector does really well even with substantial ambient light.Price: Inexpensive compared to other brands even at the same resolution.Cons:Format: The 16:10 native ratio vs. 16:9 is strange to me, but having blackout borders eliminates any issues with format.Bulb replacement: They say that you can get 6000 hours out of the lamp, but that's only with the "Eco" setting.", "In the evening, we put it on movie mode... fantastic! Had the fellas over to watch Monday Night Football and they could not believe the difference in quality over earlier model projectors we've seen. This has forever changed the usability of the game room.Suggested items to consider: the Elite Screens pull down screen at 16:10 ratio worked perfectly with this projector. I also had to get a 3-to-1 HDMI selector unit in order to feed three electronic feeds into this one HDMI slot. No noticeable degradation though... works great.", "This was probably one of the most researched purchases that I've made in quite some time, mainly because I knew so little about this type of product to begin with. Ultimately, I chose this particular brand and model because it was one of the least expensive DLP projectors with a native resolution of 16:9. (Well, actually, 16:10) Quite simply, it is an awesome product that performs exactly as advertised. I use it primarily in front projection mode on a 132 inch diagonal screen outdoors. Color is excellent, pictures are sharp and crisp."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,351
|
I measured the pan to get the inside dimensions and the outside dimensions (including handles), in centimeters and inches.Inside: 36 cm x 24.5 cm, 14-1/4" x 9-5/8"Outside: 43 cm x 25.5 cm, 17" x 10"Hope this helps!
|
{"question": "What is the width of this pan", "document": ["Not sure we will, as we have a special pan for lasagna that works nicely.", "I ended up buying a plain ole stainless steel lasagna pan instead. At least it can't chip!", "This is just a beautiful example of enameled cast iron cookware. It cleans up as described and performs like the cast iron pan I envisioned.", "This pan is heavy and a great size- very impressed with the quality. Looks like it will last a life time! The red is vibrant and true to what you see on your screen.", "Just watch out for the enamel chipping, as another reviewer pointed out hers came chipped from shipping. I think this pan needs treating as if it were made of glass!", "I like this pan because I can use it on the top of the stove too. I was able to make the au jus for the standing rib roast in the same pan. Great purchase!", "This pan is just the right size and depth. It is very well made and it cooks lasagna perfectly. Straight sides and nice handles for lifting out of the oven. Easy to clean up. Well worth the money!", "I love the Cuisinart Enameled Cast Iron Roasting/Lasagna Pan. It's just the right size. It cooks evenly and quickly and clean's up better than any aluminum or stainless steel pan.", "This pan is only 2.5 inches deep. Its interior dimensions measure 14.5\" x 9.5\".That said, it seems to be of fine heft and quality, and it's certainly a beautiful pan.", "Nice quality; however, the pan is nowhere near as deep as advertised. It is only 2 and 3/4 inches deep (total outside depth). Inside is only 2 1/2 inches deep."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,354
|
Yes
|
{"question": "Does it work with a Canon t3i?", "document": ["This works exactly as was described. It holds my Pentax K mount lenses on my Canon T3i tight and secure.", "This adapter is high quality and allows my PK lenses to fit perfectly with no shake onto my Canon T3i (600D).", "If you've never manually focused using live-view, you're in for a treat. Metering works without an issue, but aperture data is obviously not sent to the camera, so be sure your lens has external aperture control.Note: if you use a full-frame Canon camera body, Pentax lenses could damage the mirror. This review only applies to crop-cameras such as the T3i/600D.", "Had several Pentax lenses and wanted to use them on new Canon T3i. Yes, it is possible with this adapter. The mechanism for opening the lens stop for viewing does not match up so view finder may be dim. (The adapter only mounts the lens on the camera body.) But hey, if you are too cheap to buy a new lens, you must put up with some inconvenience.Biggest problem was that the adapter was difficult to screw into camera body far enough to latch. Not much to grip the adapter with.", "The adapter will work but not to good and when you mount the lens the position on the camera its not the same as in a pentax camera, I have the fotodiox adapter for Nikon Lenses on Canon Mount and I will buy the same brand for the pentax lenses..", "I am so glad that I can now use my quality prime lenses, breathing new life into them!For those of you wanting to use your old PK lenses on full frame cameras, I have used and would recommend this adapter:Fotodiox Lens Mount Adapter with Dandelion AF Focus Confirmation Chip, Pentax K/PK to Canon EOS Camera adapter, fits Canon EOS 7D, 20D, 30D, 40D, 50D, 60D, Digital Rebel xt, xti, xs, xsi, t1i, t2i,t3, t3i,300D, 350D, 400D, 450D, 500D, 550D, 600D, 1100D,...", "While this is a very well constructed adapter, it does not work with the Canon T1i. Even using the manual adjustment, I have found out that when you use this adapter you will over expose every shot. I don't know why but it does. I am going to try the adapter with the AF confirmation chip to see if this fixes the problem.", "It fit my Canon like a glove, so it must have been made to high standards! I have not witnessed any problems with the release lever, it works as it should. I have not experienced any of the \"wiggle\" that others have with other adapters, and that's even using the giant 300mm prime lens that I have!RESULTSI was sad to find that this adapter did not work on my full frame camera, as the fotodiox AF confirm chip did. It kept giving me an error, and doing funny things with my mirror locking up.", "After a couple of tries I gave up, not wanting to damage my camera. For crop DLSRs (specifically the Rebel t2i) I am pretty pleased with the results from this adapter. There is no light leakage, nor loss of quality. Infinity focus is solid, and after using this adapter with several lenses, I have not been disappointed. I have added a customer image (image of a duck) to show you the quality that this adapter will help you attain. Lenses are perfectly placed, and retain all the quality you would expect from the well made Pentax/For Pentax line!WHY 5 STARS?- Well made, no quality issues (+)- Not a bad price for the ability to use lenses that would cost upwards of $500 in the Canon line (+)- Does not work with full frame, and not because of lens problems (-)OVERALLI would highly recommend this adapter for those with crop sensor DSLRs.", "This adaptor fits perfectly onto my t3i body and pentax lenses. The only thing I could recommend would be to purchase a separate adaptor ring for each lens you plan to use; as switching the adaptor between lenses is a bit tedious when in the field.Needless to say I'll be buying a few more :P"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,371
|
yes but I don't think the AF works.
|
{"question": "Is this Nikon 50mm f/1.8D AF Nikkor Lens - Grey Market compatible with Nikon D5100?", "document": ["Because this is the last generation lens (the predecessor to the Nikon 50mm f/1.8G AF Nikkor Lens), it comes with a much lighter price tag. I have personally used the 1.8G and the 1.8D. Both lenses take great pictures; there's not a whole lot of difference in the optics (favoring the 1.8G slightly). The 1.8D is a little noisier when it focuses, and it still has an aperture ring. The 1.8G does not have an aperature ring, and is slightly bulkier.The Nikon 50mm f/1.8D AF Nikkor Lens is a superb value for the entry level photographer.", "I'm using it with my Nikon D5100, for that price this is a very nice Lenses. I'm quite happy with my Nikon 50mm.The manual aperture doesn't work with my Nikon model and should stay locked, anyway everything is controlled by the Camera software. Now, I wanna try the Nikon 50mm f/1.8 G to see the difference.", "I presently have a Nikon D5100 camera. I read dozens of reviews regarding this lens, most were good, a few not so good relating to the D5100. I have to say I just received it a couple of hours ago and it is incredible. Outdoor shots at f4 and f22 crisp, clear and bright...inside at f 1.8 equally amazing without flash. I kicked up some internal settings in the D5100 such as \"picture control\"...I set to Vivid, saturation with 3 right clicks, and set ISO at 100 speed - incredible pictures.", "Great depth and awesome color clarity.Looking forward to learning more about what this lens can do, but it works great on a Nikon D5100 digital. You have to focus manually, but I prefer that anyway. You set the aperture lock at f22 and adjust in \"P\" or \"M\" mode.Going to be traveling this year and this 50mm will be our primary lens. Lightweight and sturdy. With a Nikon 55-200 I will only need 2 lens, both lightweight instead of the more bulky 300 telephoto and the standard lens that came with the D5100.All the good things I read about this lens are totally true, and a bargain at that!", "Along with so many others, I think this is a great lens. Terrific value and in perfect new shape. No problem with it being grey market.", "This compact and fast, f/1.8 lens is versatile and perfect for travel and portrait pictures as well as general photography.", "This lens only works in auto focus mode with built in focusing motor cameras. Since I have a nikon D5100 I can't use the auto focus mode, but let me tell you something, once you get used to focus it manually you'll get super sharp pictures and a an unbelievable bokeh if you can play with field depth. I highly recommend it, just a great piece of optics.", "The depth of field is amazing and colors vivid. Manually focusing was not at all a problem, the D5100 provides a small green dot in the viewfinder to indicate proper focus....I relied on that most of the time, but not always.This has become my favorite lens hands down and a true bargain for the price.UPDATE: It has been 5 months since we got this lens and it is performing perfectly. I get caried away talking about this lens because it is that good! My wife is going to take up photography and took my D5100, I now upgraded to a Nikon D7000 and will have to purchase another one of these soon for her.", "I LOVE this lens! I really have no complaints except that my camera body (a Nikon D5000) is too \"basic\" - and will not drive this lens in auto-focus. I can manually focus it no problem, and on higher Nikon models (D7000 and higher) there is an additional pin that will make this lens truly AF if you want it. Now I just have an excuse to upgrade my camera body:) Great lens though, takes amazing photos. Fast shutter speeds, because it has such a large max aperture.", "the images are slightly soft at f1.8- f2.0 but sharpness increases tremendously at f4 and is probably one of the sharpest lenses made by Nikon. so ignore any reviewer that says this lens is bad. they probably got a bad sample or the ups workers damaged the package (which happens very often) great lens for if you're on a budget or an amuerature photographer or even a professional in need of a portrait lens. Don't forget though this lens is made for fullframes so the 1.5X factor is in on smaller sensor sizes so this lens is actually a 75mm on many cameras."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,397
|
no....just lens cap.
|
{"question": "Does this come with a lens hood?", "document": ["its exactly what i needed for my action sports needs for close up shots. Its a tad on the heavy side, but overall a good lens.", "It would probably would have been 5 stars if I had a shorter lens. I tried it on my short zoom lens and my telephoto lens. I assume for video camera it would be fine but not for my DSLR, maybe if I owned a macro lens it might have worked.", "I bought this lens to tide me over until I buy the Titanium Series. Having owned many .3x lenses, Opteka, Century Optics, and Raynox, I can say this lens does what it needs to do for the cost. The build is great, the glass is clean, and size is right. There is no vignetting (black corners) on my Canon XF-100. Comes with plastic lens front cap that fits snuggly. Over all I dig this lens.Remember to turn your image stabilizer off or you'll likely see black corners bouncing around your picture!", "A cool product with a wonderful effect. This lens produces what definantly seems like a clearer picture, I suppose that is the HD2 playing into effect. Excellent 180 degree capability and no tunnel effect at all. I even put like 5 spacers over my existing lens of my GL2 and still no tunnel effect. For the price, this lens puts out more than enough.The only con is it is not a zoom lens.p.s. only buy this product if you are using a camcorder. Not sure how it would effect say a Canon t2i in video mode though."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,448
|
As long as your steam mop has a triangle foot print, these pads are universal and the adjustable draw string makes them compatible with all triangle head steam mops.
|
{"question": "Will these fit a crofton steam mop?", "document": ["They fit my steam mop and were just what I needed. They do a great job cleaning, and then you just throw them in the wash!", "We have the older H2O steam mop and couldn't find our cleaning pads. These fit and worked just like the originals.", "Horrible. Replacement, compatible steam mop pads don't fit correctly, the ties break and won't stay on them mop. I do NOT recommend. Go with the original pads.", "These replacement pads fit the H20 mop perfectly. They are a little thinner than the original pads that came with the steam mop. But, that is okay and I think they will last quite awhile.Yes, I'd recommend these pads.", "These are just fine and fit my steam mop as well as the original. The price was terrific and with 6 of them, I always have clean ones ready to use. They arrived quickly and I am very happy. Thank you Amazon for offering what I need at good prices!", "I've had my steam mot for quite a few years and started out with a few original pads. Not that the old ones are wearing thin I got these. They have no body to them. They don't even fit over the mop head. Thin and cheap and don't fit. Don't waste your money. I now use them for drying dishes. Made in China. Thought so.", "These pads fit the mop head better than the ones that came with it. They stay on better and work better. They are thinner than the original, but not too thin to use. I followed the advice of reviewers who said to let the pad get wet before using on the floor. That's the trick for them to work well. Switch the steamer on for a few minutes until it starts to steam and the pad is wet. Then it will just glide over the floor and pick up all the dirt.I used the same pad in the bathroom and kitchen.", "They are difficult to get onto the steam machine. They are cut too tightly to fit the base of the machine.", "I love my H20 mop and these fit it well. I through them in the wash with the laundry and reuse them over and over.", "These replacement covers are better designed than the ones in the original kit. They fit better and are able to be secured aroung the head of the mop. I really like them."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,478
|
As far as the amount of water to put in, you simply fill the reservoir and the machine takes care of it. You do, however, have to push the button to stop the brewing process. There are a couple of ways to figure out how long to let it go. One is to simply time it. I would suggest starting with 15 seconds, turning it off and trying it. The light on the machine blinks about once a second while it is brewing so you can simply count the blinks. Depending on your taste and the capsule you use, with a little experimenting you'll figure out the amount of brewing time you like. The second method is to get a shot glass with measurements on it. My local supermarket had it. Then stop the brewing when it reaches a certain level. Start with a 1.5 ounce shot and experiment from there based on your preference. By the way, besides the price, I got the manual machine so I could chose the length of shot I wanted to pull rather than having the machine do it for me.
|
{"question": "Since this machine is manual how will I know how much water to put in and when to stop it in order to make the espresso correctly? I would hate to was", "document": ["Let's assume you know about nespresso, so I won't talk about the coffee, ease of use...I really like this machine for the following reasons:- pretty big water tank (compared to the newer models: city...)- manual controls. Well: one on/off button, and one \"start/stop the water\". I like that so much better than the models with preset cups sizes. With this one, I can make my coffee stronger or more diluted as I want/feel.Nice point: the led for the water on/off button blinks once per second when dispensing.", "I bought this because I wanted nespresso, but didn't want to pay for the more expensive models that they carry at Bed Bath & Beyond and other retailers. As far as I can tell, the only difference is that with this model is the manual start/stop brewing. Since it takes all of 10 seconds to fill an espresso cup, it isn't a big deal for me to stand there and wait for my espresso. If I could go back and buy a nicer model, I would buy this one again and use the extra $ on the pods.", "I went through all of the sample pods, and have already ordered my preferred refills. I happen to think starbucks is pretty decent, hate Keurig, and love Urth Cafe and intelligentsia here in L.A.; those are pretty much my espresso points of reference.The espresso comes out nice and hot if you operate the machine according to the manual (once turned on, you wait until the light stops blinking. If it's the first time of use or you haven't used it in a few days, run a cup of water through first).", "I love lattes! Sometimes I put a square of Nespresso dark chocolate in the cup, or dip biscotti. So good and indulgent. Be good to yourself and make your own little relaxing ritual for enjoying a great espresso or latte. I know I deserve it. So do you.", "I wasn't sure I would like the "manual" Nespresso and wasn't even sure what this meant but I didn't want to spend more than $100 on a machine as we already have a Keurig that my husband uses. I have found it to work perfectly and the only difference is that you have to press the button at the end of the brew as opposed to it justing brewing the right amount. At first I was brewing it too weak for my taste, so I began using a small espresso cup to know when to get the right amount.", "I received this Nespresso yesterday. I put the plug in the electricity and then it exploded. I recognized later that the item needs 120 V and we in GCC we have only 220 V. So I don't know what to do! I am so upset since the info are not mentioned within the catalog, just a small sticker on the box.", "I love this machine and would like to comment on Nepresso's customer service; the BEST, no exceptions. I had an Aerochino that wasn't working right and they just sent another, no questions. As to your orders of the pods Never request next day delivery because it isn't necessary. Order on a Thursday morning and you'll get it on Friday, if not then Saturday for certain.You will consistently make excellent coffee/espresso and surprise your guests. My only wish is a repeat of others; that the spout was about half an inch shorter to accommodate larger cups.", "This is tough, when we use a variety of cup sizes and shapes, to keep the taste consistent. In fact of our very first cup we guessed wrong and filled the cup too much before stopping, and it was a lot weaker. The second time we undershot, then 3rd time a charm - but we've just proved to you that you are not going to get a consistent cup of coffee taste having to try to guess when to STOP brewing. I then tested to see if it would stop at a large cup if you don't stop it - no - this is a completely manual brewer only - will not stop until you press the brew button a second time.More for your decision making: Me and the wife bought this for strong cups, expresso, latte, etc.", "I drink espresso. My wife goes te extra distance to froth milk for a latte.I make espresso at home with a manual machine, going through the quest for great bean, proper grinding, measuring, tamping, etc...all component parts of the elusive consistently good espresso shot. I have gotten the drill down to a matter of minutes....and I can draw a decent shot more often than not. I believe that one ought to know what goes into making something of quality...and this really rings true for me when it comes to coffee.", "I would NOT recommend this machine. It seems like a prototype that they just decided to sell.Dislikes:-Manual cup size - meaning you have to stand there and turn the flow off when you **think** you have the right amount-Compared to the more expensive Nespresso machines, this machine produces burnt tasting espresso (the U is actually a really nice little machine)-Flow continues to leak after you turn it off-Can only use tiny espresso cups because drip catcher isn't removable like other machines-Customer service is rude and not helpful (I bought this directly from Nespresso as a present, there is a 14 day return policy and since this was a present, it wasn't opened until after 14 days so we couldn't return it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,480
|
Yes, they dry much quicker that cotton. I bought them as camping/sports towels for that very reason. I'm an avid outdoorsman and was familiar with how polyester tee shirts dry so much faster than cotton.
|
{"question": "Does the towel itself dry fast?", "document": ["The best towel I've ever had. I always hated those bulky towels that were heavy (even before it got wet). The last towels I bought were Dri-soft from Bed Bath and Beyond--worst towels-leaving bits and pieces and not really drying. These towels pretty much dry with one swipe. If you want to get dry fast with less effort and you don't care about having the softest towels, this is the towel for you.", "This towel is not soft at all and the little texture bumps are honestly a little weird at first, but WOW does this towel dry! You don't rub yourself with this towel, you blot the water away and it works very well on both skin and hair. After you have dried your entire body, just put it on the rack and it air dries lighting fast!I bought this for a loved one that does not have laundry in his apartment so I knew towels would be an issue. I have since visited, used this one towel all week and was amazed at how well it performed!", "This towel is thick, large, comfortable and washes up very well. I love that it isn't bulky. It dries very quickly and does not harbor an odor when hung up, since it dries so fast there is less time for build up/mold to occur. I would but this towel again in a heart beat and would even consider giving it as a gift!", "If you are looking for a soft plush towel, this is NOT it.If you are looking to get completely dry, this IS what you want.", "I purchased these towels in order to dry my hair without it frizzing. I just use the towel to squeeze the water out. Works great!", "I didn't know what to expect with a microfiber towel but when this product came in I absolutely loved it! You don't have to rub all over like traditional cotten towels, you can pat yourself dry and the towel is quick to dry as well. Definitely considering more for my household.", "If you want fluffy 100% cotton towels that do not dry you completely and produce tons of lint in your dryer please don't buy this microfiber towel. Since I am not a lint collector I immediately replaced all my cotton towels with a half dozen of these great drying waffle weave microfiber towels. I also use them as hand towels. Yeah they are expensive but they are worth it.", "Love these towels for camping. I would give these 5 stars, except the Sage color looks much more vibrant in the photo than the actual product. Other than that, I have no complaints. They are super absorbent and dry quickly, which is very important when camping. You can actually use the same towel for several days and they don't get that musty smell. Plus, they take up so much less space. I was able to get 8 towels (4 in the larger size and 4 in the smaller size) into my trailer cupboard, whereas before I could barely get 2 bath towels and 2 hand towels in the cupboard.", "They wash and dry nicely - look exactly the same. Will probably replace my towels at home with these in the future - hope they come out with more colors.", "These towels are light weight and dry very quickly. Perfect for the gym, swimming, or camping. Nice to pack when weight and space are at a premium."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,491
|
They arrive in a retail package, this is my second time ordering them. They are great and have may other uses!.
|
{"question": "do these bands arrive in a [retail] package? or just loose un-marked?", "document": ["I use them for another purpose besides banding food together, and they work great. I'm glad there are so many in the package.", "Architec Stretch Cooking Band, 2-Inch, Package of 20, Assorted Colors. Excellent value for dollar. I would highly recommend this product", "I love these silicon bands. I first discovered them in an unlikely place, an Ace Hardware Store, in St. Croix, Virgin Islands. We have a sailboat and usually keep it in the Caribbean, where it is tropical and the heat is very hard on all things elastic. Traditional rubber bands go bad and loose their elasticity in this climate, particularly when we leave them aboard our boat when we are back home and it gets very hot down inside. I have used these for several years now and they never lose their capacity to stretch and hold.", "Got these at BB&B; for my mom when she was cooking. Liked them so much I put bands on my tools, power cords and other places. These are the sturdiest rubber bands you will find in the home. They are great for work outside the kitchen. Now I dont have to worry about camping gear coming loose or separating pieces of survival kits or first aid. Yes you could use cord for that stuff, but the most advanced nylon line in the world won't stretch as much as these rubber bands, and they are easier to reuse or rewrap if your bundle changes in size.They've lasted through Mojave summers, Minnesota winters, months of direct sunlight, cooking, freezing, and rough abuse.", "My wife and I use these for more than just cooking. They are sturdy and last longer than standard rubber bands.", "little one can say about elastic bands, they simply do what they are supposed to do.wish i could get them in the UK.", "I use the rotisserie in my toaster oven for cooking whole chickens and these bands are perfect in holding it together.", "These little bands are perfect for any and all trussing you need to do They slip right on with no effort, ten times easier than cooking twine", "Since ordering these bands I have found many uses for them. They are simpler to use than twine and hold up under oven temperatures.", "Thank you for having this product. I have a Cuisinart Vertical Rotisserie That I use and needed these bands to put around the legs of the chicken. Thank you again! !"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,511
|
If you have preamp out you dont need this...
|
{"question": "Can I connect preamp levels to the LC2i and then to my amp? What would be the benefits doing so?", "document": ["If you are looking for a good preamp/ line out converter, then this is what you are looking for! I have been using this for about a week now in my G8, and it works perfectly for how I set my system up, which if you would like to know it is configured as follows: 1x10W7AE-3, 1x Audio Enhancers slot ported sub box model 10W7S, 1x JX1000 amp, 1x LC2i converter, and 1x PC3.5B 3.5 Farad Planet Audio capacitor. I would recommend this Line out converter for anyone who wants and or needs to control the input to the amplifier due to low output head units, and even ones that do output a good signal.", "Fairly straight forward install.Do not mix up speaker inputs at the LC2i or your output will be sketchy or non-existent.I set it up with the recommended dedicated battery connection and common ground at the amp. Audio control recommended this when I had some issues, although I believe the problem in the end was the speaker inputs being incorrect(+ switched with -). Some connect it at the amp + and -, but I changed it from this setup after initial troubleshooting.I can't say as to the sound quality improvement over a high-low converter for $10.99, which I have used in a previous vehicle, but the 2 outputs make it a dream for installing another amp for my now overpowered highs.", "The GTO feature is one of my favorites, as it makes probing for an amp turn-on or power antenna (do car manufactureres still make those?) wire in the factory wiring a non-issue since the LC2i senses audio signal and creates it's own turn-on signal that you can then run to your amplifier(s) with your RCAs, all from the same location under your dash, kick panels, etc.As stated before, RTFM to get your levels matched, then enjoy.", "And this one does not disappoint. One of the best features is the GTO remote. I use this feature to turn on the amp the LC2i is feeding. This saved me from having to tie the remote in of both devices (LC2i and the amp)to the accessory power which can cause popping when the amp turns on. Oh and while I didn't need to use the AccuBass feature it does seem really cool and would be a must for factory systems with low end rolloff.Oh and for complete disclosure....", "I must say the bass is very clean, but I feel that this is a combination of elements, not just the LOC. The adjustments are also nice, however I would turn down the bass boost at the LC2i and rely on your amp/head unit for that, unless you like +50db of bass boost.Setup: (2) 10" Kicker Comp RT(600W rms), Hifonics GLX1400.1, Fiberglass boxes(0.5 cu ft each, 6 layers of mat/cloth), 2 gauge wire, LC2i.", "I utilized this unit for my 2013 Ford Mustang Convertible connected to the rear speaker leads and then to a Rockford Fosgate R300X2. My initial thoughts were that the unit didn't work as it never turned off with a constant 12v power. What I later discovered is that my installer had run a signal wire from the car ignition and accidentally connected that to the left speaker input. Once I fixed the problem and had the proper speaker leads, the unit worked great and as expected. I am very pleased with the product and its performance and would recommend this to anyone seeking a high quality way to connect to a factory speaker/HU input.", "I recently added a subwoofer and amp to the factory stereo in my gmc terrain. I tried the line level inputs on the amp and also two different line out converters. Every time the sub sounded terrible. Loud booming bass at low levels and from half volume up to full the bass trimmed down to zero output. I added the LC2I and can say it solved 95% of my complaints. It took a while to tune it all in, but in the end I am more than pleased with the performance of the LC2I.", "It also is a \"line driver\" that sends a high voltage (up to 9.5V) preamp signal up to my JL Audio 4-channel amp which powers a pair of Polk 6.5\" components and a 8\" JL Audio sub.The unit is quite heavy for it's size and appears very well made (made in US). It outputs a very clean signal to the amp. It also outputs a \"remote\" signal to switch on the amp. The AccuBass feature really boosts the bass.", "I tried the high level first (obviously, free option) and had very little response from the sub which i attributed to info i received from my friend about the <1v he measured from the signal source. So already knowing i would probably need a LOC, i had done my research and ordered an LC2i. Install was simple and straight fwd and since i read on a lot of forums that the GTO function (signal sensing circuit) wasn't always reliable, i went ahead and installed the unit using 12v keyed on power to the remote line.", "I primarily bought this to clean up the signal, which it did well, however I could not get it to auto sense signal to turn it on (so you don't need a remote lead). This is the GTO (great turn on) feature described. I ended up having to run a remote lead from the fuse panel for it to work. I was looking forward to not having to run it. The remote out feature (to provide remote turn on to other devices) worked fine.I would recommend setting the "output" level to minimum and adjusting any gain you desire on your amp as the signal distorted for me."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,513
|
I don't believe you're supposed to flip it upside down, but you can reverse the head and foot. I've used these mattresses for years and when they get an indentation , reversing it helps.
|
{"question": "I want to replace the gel foam mattress my husband has been using and want to know if this one is reversible?", "document": ["I got one of these through insurance a little over a year ago. The warranty is only 6 months and I am half the weight. Less than 5 months after acquisition the center gel foam cells collapsed. Less than five months later the same thing happened to a replacement and a third replacement died in the same manner. The dealer said that customers had mixed experiences. I will be looking for a memory foam topper with a much better warranty. Too bad- the gel foam tops were very comfortable while they worked.", "My wife has been using her Invacare bed for a few months. Lately she had started complaining about the comfort. She weighs about 90 pounds so I was surprised. Besides being uncomfortable, something about the original mattress wasn't letting her turn over. I searched for a highly rated solution and found this overlay. She loves it! After I had installed it she wanted to check it out and instantly fell asleep. After a couple of nights she is still thrilled. I have no problem recommending this product.", "My husband needs to use a hospital bed now and this turned a very uncomfortable spring mattress into a comfortable bed for him", "This mattress overlay is very comfortable with no pressure points. I had been sleeping on a waterbed for the last 35 years and had no regrets when I switched for reasons of having a bed that is easy to move.", "This is a great alternative to a \"Gel Bed\". The list price on it is $545.00! For anyone that is partially bedridden it is ideal.", "I bought this as a gift to my daughter. She spends most of her time in a hospital bed, not known for comfort! She called me the following day and said it was the best nights sleep she had in months! That was all I needed to hear! !", "Bought this for my father-in-law who uses a hospital bed. He is not bed -ridden; however, at his age, he spends a lot of time in bed and was uncomfortable. He is quite pleased with this mattress overlay.", "color choice very unusual, but concept is very good, and it improves the comfort of the bed quite a bit.", "This has made a great improvement in my wife's comfort level. We are very pleased with it and give it an excellent rating."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,532
|
screws are supplied, but since I wouldn't be putting heavy things on it, I just used the Command strips to attach it to the wall. When I get ready to move, just pull the tab and the wall is good as new. I just hang metal measuring cups and measuring spoons on it. I love the rack and I love using the Command strips.
|
{"question": "install", "document": ["I highly recommend the rack - inexpensive cost, attractive organizer and easy to install.", "Very easy to install and seems to be well made. The stainless steel finish is very nice considering the price.", "This is the second one of these I've gotten. Easy to install and adjustable hooks makes it a perfect fit.", "Looks nice, very inexpensive and very easy to install. You cannot go wrong with this purchase (useful in any kitchen).", "I am about to purchase a second one.It is nice looking, works well and was easy to install. No complaints here.", "Great addition to my kitchen, easy to install, and the hooks are large enough to hold more than one utensil if you prefer.", "This rack has a sleek look, ia practical, easy to install, adjustable, and economical. Oxo strikes again with a great product.", "It is fairly easy to install and looks good. I now have three of them in my kitchen and would not hesitate to buy more if I need them.", "I bought two of these. They were super easy to install and they are so functional. I wish i had more wall space so i could buy more of them!", "For the price the item works great and looks good, very simply function and install. would recommend for any outdoor kitchen."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,558
|
Any Would Work But Their Chocolate Is Really Awesome And Comes In Resealable Bags. This Is My Second Fountain And Many Different Chocolates
|
{"question": "Do I only have to use Sephora chocolate or will any brand do ?", "document": ["It was worth paying $20 more to get the Sephra name brand. I read reviews of other $40-50 chocolate fountains, and they all said how noisy they were. I paid $70 & got free shipping through Amazon. This unit is very quiet, and some people couldn't even tell there was a noise. It worked perfectly! !", "I'm so glad I chose this fountain over all the others that are available. It worked beautifully, and was a huge hit at our party. I would advise buying the Sephra brand chocolate wafers that are recommended, too, because you don't have to add oil and they melt quickly. Also, the milk chocolate was delicious! The cascading chocolate formed a perfect curtain of chocolate, just like the picture on the ad and on the box! We also tried the Wilton Chocolate Pro Melting chocolate wafers, and they also worked perfectly.", "We bought this for our daughter's graduation party. Had never used a chocolate fountain, but had no problems setting it up. We used Sephra brand chocolate and had no need to burp it. Everything worked perfectly and was much less expensive than renting one for our party of ~50.", "I was amazed how easy this was to use. I would recommend this fountain along with the Sephra chocolate.", "It looks professional (not cheap) and it holds quite a bit of chocolate. I will officially use it for the first time in couple days for a baby shower of up to 50 ppl. I'm sure it will be a great treat for the guest!", "I brought this to use at parties. Everyone loves it. It runs very quiet and keeps a good flow of chocolate going. It definitely needs to be level. If not is does not work very well. It has adjustable "feet" that you can adjust to level it. It works great when level!", "It looks nice however, I could not get the chocolate warm enough to flow. Perhaps I should have purchased the recommended chocolate. I will keep it and call for help rather than send it back because I really would like to use it again in the future.", "Great product, excelent performance, quiet motor, you don't waste too many product as in any another bigger chocolate fountains, I use it also with chamoy and works just great, you can have it turned on by 2-3 hours consecutives with no problem at all, easy to clean and assembly, the only inconvinient is that you can not remove the basin to clean it, so have to be very careful when washing it but no big deal.", "I bought this fountain, which is the smallest of Sephra's line of chocolate fountains, for my daughter's Sweet 16 Party. It was a huge hit!It is a VERY NICE looking fountain and VERY QUIET! I found it very helpful to watch the YouTube videos by Sephra. This size serves 20-30 people. I thought about getting a bigger one but opted for the smaller one to use for more intimate occasions. This size uses 4 pounds of chocolate.I used the Sephra Milk Chocolate because you don't have to add anything to the chocolate to get the right consistency.", "So quiet, so beautiful, so easy to operate! Definitely worth paying extra for this. I bought 2 bags of Sephra milk chocolate and didn't even use everything. After melting about 1.5 bags of chocolate (3 lbs) in the machine, we turned it on, and it worked like a charm. The chocolate was delicious too, also definitely worth buying.We had about 15 people and we did not finish 1.5 bags (or 3 lbs) of chocolate. Next time, I would reduce it to 1 bag of chocolate (2 lb) for 15 people, especially if I am also serving other food."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,566
|
5 5/8 inches tip to tip.
|
{"question": "How long are these forks? My little girl really likes tiny forks?", "document": ["Love these little forks. Nice weight, good quality. Now I need the matching spoons! Eating with a little fork or spoon really makes the meal last longer!", "Love these! They are good heavy weight 18/10 Stainless with a beautiful finish - similar to a pewter look. They have a good substantial feel; definitely much better than most lightweight appetizer forks. I had ordered a different set from Amazon and sent them back... too light and with tiny tines on them. Will be adding to this Silver Tear collection. One note, however, the forks measure about 5.75\" long, not the 8.5\" which appears on the description (I think that must be the shipping dimensions.)", "I love these little forks, this design is so whimsical and unique. I have everything from this collection and love them all!", "We purchased knives, forks, and spoons in this pattern for use with appetizers and were happy with the quality and weight. When my husband saw them, he suggested we keep them in the kitchenette in our home office so we have utensils, if needed, for snacks. Their size is just a little larger than one would expect for appetizers and smaller than usual for dining, so they can go either way. (Earlier this week, when our daughter stopped by unexpectedly, I picked up enough KFC for a light lunch for all of us and we ate in the home office using these utensils.", "The weight, the size, the design...all are great. I have other "appetizer forks" and I kept looking around because I hadn't found "the one". Either they would feel flimsy, or the actual fork would feel too tiny, or the handle would be feel too small. These have none of those problems! They fit in my three tier tiffin, so I don't necessarily have to pack only finger foods for my kids and I for lunch when we go to the zoo.", "Purchased these and 4 spreaders. Very, very nice. And sturdy. Where are the little spoons available to fill out the collection?", "I love the beautiful, twisted handles. They're very easy to hold and feel good in my hands. They're also great for little hands and for small bites in addition to using them as intended. I expect them to give me many years of good service.", "These forks are perfect for lobster and crab meals. They are strong, yet shiny and fashionable on the dinner table.", "These are very nice forks and look much more expensive than they were. They are polished and the workemanship is excellent. I am tempted to order more.", "Even thou these are cocktail forks, I use them for feeding my baby. Just the right size for her mouth."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,608
|
no its to low for a trundle. I like it because my grandaughter stays with us sometimes and likes to tumble out of bed at night and she doesn`t have far to fall. Its nice though.
|
{"question": "How high is it? Can a trundle bed be placed underneath it?", "document": ["I've always wanted a daybed, since i don't have a big room. I can snooze in it at night and have company plop on it during the day without feeling weird since it looks like a sofa. It's pretty high up. A simple design that goes with everything. Fancy looking things creep me out. And it's extremely easy to put together. I did it in about 25 minutes. Couldn't ask for more. It's beautiful and not huge.", "Amazing ! Totally a must buy if your looking for a good quality bed for less!! No complants at all", "It sit a little higher with the two mattresses, but that's okay with me, too. The bed is well made and assembly was easy. Did all by myself with no problem. Looks great in my room.", "We have had this bed for about 5 months now and it is perfect. We got it for our daughter who is 3. She didn't like her toddler bed once we took her out of a crib, this bed is low to the ground so I don't have a fear of her falling out of the bed. It's just right for her!", "Price was very good and like the looks of it.Slept in it one night to see how it felt.Had a good nights sleep. The only thing I didnot like was that it was too low to the floor.Had to purchase 6 inch rises to raise bed up.Not too crazy about how the rises look.It might be a good idea if they had a line ofrises to choose from or even better, make thebed 6 inches higher.", "In closer inspection, I saw that the weld was VERY poorly done and did not attach well to the heavier gauge support (i.e. a cold weld). I 'fixed' this by adding a support bracket. I also had issue with one of the blind nuts on the left side panel and needed to drill it out and use a through bolt. This was a lot of effort to assembly a bed frame, and I would have just thrown it our if I didn't need it by the weekend.", "This daybed is pretty nice. The frame is sturdy, it was easy to put together. I wanted something durable for my 2 year old's bed and this fit the bill really well. The wood slats are not very strong, so if you want something for an adult, I would suggest something that uses metal springs. Also, this sits pretty low to the ground - so low that it is uncomfortable for an average adult to sit on with their feet on the ground for any long period of time.Overall, it works great as a kid's bed and I would recommend it.", "I have waited a couple of months before doing this review because I wanted to see how this daybed would hold up. Well, I can tell you that I am very pleased with it. I herniated a disc and had been sleeping on the floor. I am better but the bed I had slept in before the injury was really uncomfortable. I purchased an eight inch memory foam mattress and this daybed. I know they don't recommend memory foam mattress with the use of these, but it works really well for me. I put a standard coil spring under it, and I sleep like a baby.", "Au contraire. Three slats and all the hardware were missing. So we once again are to box this up and send it back as you cannot simply ask for the rest of the parts. Given that chance, I went withKings Brand Matt Black Metal Twin Size Day Bed (Daybed) Frame With Metal Slatsinstead. Hopefully, we'll have great luck as my little girl would like to sleep on her birthday bed.One aside, the bed was much much lower than expected. I think it would have been fun for my daughter, but an adult my not appreciate such a low hoist to sleepdom.", "It appeared that the box was opened and resealed and after laying out all the parts, I realized that the hardware package was missing. I now have to call the company in Montreal Canada for a replacement. Too bad I did not open the box right away as I need this bed in four days. I purchased hardware at over $11.00 at the local Tractor Supply store, as there was no way the replacement hardware package would arrive in time. Update: I reduced my rating down to one star as when I started to assemble this bed, I noticed that the weld on the headboard to main support was broken."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,613
|
I use the remote on my D800 and have no problem with access to the controls. It makes for a bit of a tight fit related to the flash button and is close to the lens release and left dial that controls some of the settings like quality and bracketing etc. All are still accessible though. As well given I am taking remote pictures I will have the time to ensure proper settings are selected beforehand. This remote is excellent and cost-effective. Used it on safari with mirror up to minimize shake and vibration with long zooms.David
|
{"question": "I see this is mounted in front of the camera rather on the hot shoe. Does this pose a problem shooting or covering some of the functions?", "document": ["The knurled ferule knob is a slightly oversized to make tightening process easier for those of us who don't happen to have delicate little fingers.The receiver antenna is made of a soft flexible rubber to prevent damage, and when the receiver is mounted to the camera, the antenna sits just slightly below the hump of the D800 integrated flash. NICE! In fact this receiver mounts so unobtrusively, I left it mounted to my camera during a recent all night shooting excursion through Chicago and had no problem with it. I love the fact that this thing has no dangly cable nor does it require you give up your hot shoe.The receiver which draws its power from the camera (no batteries needed for the receiver) also has a two LED lights, one that glows red to confirm the receiver has power and one that shows blue to confim a shutter activation in progress.The transmitter is a sturdy built unit that takes a single AAA battery (not supplied).", "I can see the antenna snapping easily against the neck strap if you sling the camera around with a heavy lens attached. That said I'd much rather the antenna snap than be sturdy enough to torque the whole receiver enough to damage the camera body port and SMDV seems to realize this too.My only other note is that on a D800/800E the top of the receiver body sits right next to the flash release button. I can't really imagine under what conditions this would be a problem except if you're shooting hand-held eye-to-viewfinder and suddenly need to pop the flash, and at that point why do you even have this thing attached?", "Sometimes I want that spontaneity after shooting a delayed shot, so an extra option of the handheld remote would be great. But with my current remote going on the hot shoe (and then there's the GPS that ALSO needs to go on the hot shoe) - it's a difficult call.Regardless, it's a great device and a definite item to keep in your camera bag (or always on the camera). 5 stars!", "Like this product so far. Great design because: (1) receiver attaches to camera body (Nikon D3), not the camera's hot-shoe, so you can use it with your flash attached to camera!! !, (2) receiver uses camera's power, so no battery to buy!! !, and (3) transmitter uses only one AAA battery [not some hard-to-find battery]!!! I use this mostly for shooting with camera on a tripod & slow shutter speeds with camera's mirror locked up.", "This is about the forth remote I have purchased over the years for my Nikon cameras. The RFN-4s has set a new standard for remotes. The unit mounts directly onto the connector and not the hot shoe allowing use of the built-in flash or a mounted flash. All other remotes have failed on me. So far this one is a survivor. Great product.", "Pros- not as cheaply made as expected- auto focus when 1/2 pressing the shutter release- high hit rate for firing- good range- fits in the 10 pin connector and doesn't interfere with the hot shoeCons- you pay for the pros aboveI am not a professional photographer, but rather a serious hobbyist, and this wireless remote fits my needs very well.My favorite features, in addition to the range and performance, is that you don't have to have a direct line of site to the receiver from the remote, and that the receiver fits into the 10pin connector instead of the hot shoe.I am now able to get into family pictures on vacations.", "I have my own remote for the Nikon D300/D800 that I have been using for years (via EBay). The biggest problem is that most of these remotes attach to the hot shoe (or you rig them to wrap around your strap). So hearing about this one, I bought it as a gift for someone's Nikon D2x (and that way I got to try it out as well! ).It's excellent!Keeping the hot shoe free and having it attach as 'part of the camera' is a smart idea!", "I have used several different triggers on my "Take Your Own Photo Booth" that I set up at weddings and parties. This is absolutely the best, with one caution... If you need to use the PC Cord outlet, you cannot use this item because it screws into the 10 pin connector and the antenna obscures the outlet. I don't have the problem because I use a hot shoe PC outlet or a Pocket Wizard. This unit is flawless and survives dozens of drop kicks by little kids and clumsy adults.", "The deal breaker is this: the receiver that is attached to the camera is rather thick. After its completely plugged in snugly it stands away from the camera's body 3/4 of an inch. That's fine if you do not have a big lens mounted. I have a Tamron 24-70mm F2.8 lens I bought just for portraiture and it was this lens I wanted to use this remote with. When that lens is mounted you cannot put the receiver on without removing the lens first. And even then as you turn the lens into position the lens hub then pushes into the receiver and pushes down on it, as the lens clicks into place.", "I literally popped the battery into the remote and connected the receiver to the D800E and that was that. Done. It worked. Beautifully. Auto focus, release, bulb mode, everything just worked.That said I noticed another reviewer commented that they managed to break the antenna on their receiving unit although it didn't impact functionality. I can see how this would be possible as the receiver antenna plastic feels somewhat fragile. The actual mounting screw for the port is steel and is very sturdy but given the perceived frailty of the receiver antenna you should only leave this unit attached to your camera body when it's mounted to a tripod or otherwise not slung over your shoulder."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,631
|
The length is 8.75 in / 22.2 mm
|
{"question": "what is the length", "document": ["Bowls are too small. Length is great.", "It does what it's meant for. Length is exactly as advertised, and good quality overall - no complains so far.", "I ordered these for my wife and she is delighted with the length. I really like the heavy sturdy construction.", "Great spoons, shiny and just the right length for the purpose. Have washed in the dishwasher numerous times and they still look new.", "Just the right length for a time when you need it: ice tea, getting to the bottom of a jar, or eating ice cream right out of the container.", "These are the perfect length and great quality. The spoon part was a little smaller than I expected but after using them I can now say they are the perfect size.", "Very good quality spoons. I use them all the time for stirring when cooking. Improvements would be to include the spoon length in the description of the ad and to have the spoon part a tad bigger.", "Glad I bought them since we drink a ton of iced tea. And the length will help to get to the bottom of deep jars! MIGHT send back the second set due to the small damage...", "These are perfect for making chocolate milk. There is plenty of handle length to hold on to in a pint size glass and can be stirred faster with less chance of spilling over the side. Great quality, I expect to have these for many decades.", "Good looking spoons, longer than the ones I already have. One problem is that the bowl is small, about 3/4 the size of a teaspoon. They made the long handles very sturdy and I think they could have reduced the length a little to bake the bowl larger."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,646
|
Sata 6gb cable
|
{"question": "I'm looking for the right power cable to go with the Sata III WD 1T hard drive. Can you tell me the correct one to purchase.?", "document": ["Couldn't get the first hard drive to power on. Sent this one back for a replacement and the second one did the same thing! WD had problems with these drives either not working or they are excessively loud, so I caution you buyers out there before deciding to purchase this hard drive. I will be looking at the Seagate equivalent instead.", "There's no locking tab (correct terminology? this is what I meant by, "I'm not a pro"...) piece on the hard drive where the SATA cable and power connect to the HDD! I quickly noticed this, as I used a nice premium, well built round cable SATA 3.0 cable, which featured locking tabs that most SATA Cables do, and it just slipped RIGHT back off! Now, this isn't a crap cable, it's nicely built. BUT, it's meant to be locked in plakce by the locking tab on the cable.", "The Western Digital 2 TB SATA III 7200 RPM 64 MB Cache Bulk/OEM Desktop Hard Drive \"Black\" is a massive storage device, and is Western Digital's top of the line hard disk drive. The is a \"bare bones\" drive, so no other hardware or packaging is included. If you're not replacing an existing hard drive, you're going to need a SATA III Cable, 4 mounting screws, an empty bay in your case, and an available power connection.Out of the box, it only took me a few minutes to install the drive in my Dell XPS 8700.", "Upgraded my 1TB WD Black drive to the new 2TB WD Black drive... No back order problems, packing was great, came right away. Love the drive so far. Never had any problems with my 1TB WD Black drive, I was just looking for more space, so I'm looking forward to being able to use this drive for a long time.", "1) Sliced the top of the anti-static bag and removed the drive2) Powered down my rig and flipped the power switch on my power supply to off,cutting all the power to system components3) Connected the drive via sata power connector and attached a new Sata data cable to the drive and motherboard port4) Powered on the System, the drive was listed during bios post (AHCI mode was already enabled in my bios)5) After being at the desktop (Windows 7 64bit) I went to Start/All Programs/Administrative Tools/Computer Management.", "Before you buy it, check to see if you have a spare SATA cable and power for the drive, because you'll need those. This isn't a ding on the drive, but a note to prospective buyers as to what is meant by Bulk/OEM. Also, if you have an earlier SATA, it will still work, just at the speed of SATAIII.The packaging around the drive was protective for shipping, but not a pain to get through. Just the right amount of protection. Others have commented on the noise, but it didn't seem excessive for me.", "I graduated from Florida Institute of Technology with a sheet of paper that indicates I know a few things about computers, so I think I am qualified -- and smart enough -- to know how to unplug a power and SATA cable from a disk drive. It didn't even make a \"snap\" noise. I'm done with Western Digital.", "I have always been a huge WD fan since I've had an amazing track record with their black drives. The first 3TB drive I received was DOA. Bois would read it at 2TB, 1TB, or not at all at random.Amazon was very fast to ship me a new one, no questions asked. The new 3TB drive fired right up and works great.I give this 4/5 since I've only had it running for about a day. Time will tell", "I bought this hard drive to replace the old one in my desktop, which I mostly use for gaming (with occasional work). I haven't noticed a difference in sound vs. my old hard drive, which I was a little concerned about after reading other reviews.Performance is phenomenal, though and I'm pleased with my decision so far. I'd definitely recommend it to anyone looking to upgrade their hard drive.", "This is a review of theWestern Digital 2 TB SATA III 7200 RPM 64 MB Cache Bulk/OEM Desktop Hard Drive, Black, WD2003FZEX.This is part of the \"Black\" desktop series. WD Black drives feature a dual core processor that offers twice the processing power to maximize drive performance. According to the manufacturer specs, this 7200 rpm drive has a 64MB cache, advanced format 4K sectors, 6GB/s interface. WD Black drives come with a 5-year limited warranty (vs the Blue drives, which come with only two years)."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,706
|
The timer on the 100 is what I consider essential. It turns itself off during the night, so I don't have to worry about it.
|
{"question": "whats the difference betweeen the YM 80 and YM100?", "document": ["Euro Cuisine Automatic Yogurt Maker - YM100.I wrote a negative review for the above, because I did not understand the electronic timer workings. Thought it did not work, when it was me who did not realize, how it works. Whas I surpriced, when a very nice fellow from Euro-Cuisine called me and explained it to me. A real treat in this day and age! After trying his suggestions, the YM-100 works flawlessly and I love it. I tried to delete my earlier review - but could not find it.", "I bought this unit after I visited China several times and found their yogurt to be much creamier and tarter than any I could find here at home in the U.S. I was told by a friend that she uses the YM-80 model and eccuisine starter packets to make her own and it is just like wha tyu can find overseas. I have owned the machine long enough to have make four different batches of yogurt now and it is truly wonderful. The set up is simple, the preparation does not take long, and once you load the misture into the jars,load them into the unit, and set your timer - there is no effort at all.", "The EURO CUISINE YM 100 was the only yogurt maker with automatic shut off when I bought it a couple of years ago. All other machines, including the $50 Sonoma one, didn't stop automatically. This means that if you forget to unplug it the next day before you go to work, it will stay on burning electricity until you return and remember to turn it off!How much electricity does the Euro Cuisine spend? Neither the box nor the small manual will give you this information! However, if you look under the machine itself, you will see that it only consumes 15 W which means that a whole batch of 7 homemade yogurts will cost you between 150 and 225 watts in power, that's less than a quarter kilowatt!Since I had two SEB yogurt makers that I bought when I was living in Paris (the first one in 1973 for the birth of my elder son and the second one in 1983 after I left the previous one to my ex-wife) which already had an automatic shut off, I really don't understand why couldn't they do in 2009 in the US what French technicians did already almost forty years ago, but that's the way it is!This YM100 has two advantages that my SEB yogurt makers didn't have back in 1973.FIRST, not only it turns off automatically, but it also has a timer, which the French ones didn't have.", "Works great but I really don't think the extra cost for having a timer is worth the money. If I hadn't purchased it already I would go with the less expensive model. Setting a timer isn't really that hard and the yogurt maker stays fairly warm even when it shuts off so I really don't think it would make much of a difference in the flavor.", "I used to make my yogurt using almost the same methods used by this machine. The only difference is that this yogurt maker will keep the temperature steady for hours to let the bacteria do their thing. That is crucial. The yogurt I make with this machine comes out nice and thick using 2% milk and keeping it heated for 8-9 hours. Well worth the purchase.", "The first batch I did like this I cooked for about seven hours. I am trying ten right now. I want to see if I can get it the thickness of Greek yogurt. I have boiled the milk and it makes a little difference but not much. It's not worth it. Really, it can become such an easy part of your week and the yogurt is so much better and cheaper than what you buy in a store.", "This is an Indian dish that I learned to cook in Paris, where Indian restaurants flourished once that British subjects were allowed to migrate throughout the EEC.I made my first batch the way I made it every week between 1973 and 2003, when I moved to Miami Beach and had to abandon my second SEB in France, after 20 years of faithful service because of the difference in voltage (you may run a 120 Volts/500 Watts machine in Europe with a tiny transformer that fits in your hand, reducing 220 volts to 120 but you need a huge transformer to do the opposite!", "I did a lot of research before I bought the Euro Cuisine Automatic Yogurt maker from Amazon.com. One thing that was very important was to have glass jars instead of plastic. I found the Euro Cusiine with glass jars....perfect for my requirements. The booklet that came with complete directions has made the yogurt making so simple. There are recipes for adding fruit to make a tasty fruity yogurt. There are also recipes for different flavors of yogurt, preserved fruit, jam or jelly, and others. There are explanations of the different kinds of milk that make tasty yogurt and the difference in the consistency of the yogurt.", "I have been using the Euro-Cuisine YM100 with different store bought yogurts. They turned out delicious, a bit more like drinking yoghurt, which works well for our morning cereal.", "There is a new model available for the YM100 yogurt Maker . The EuroCuisine YMX650 Digital Yogurt Maker also sold by Amazon . Digital, timer , dated lids, better looking machine, and overall better Yogurt Machine."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,712
|
You need to run composite cable(3), wires red,white (audio)& yellow(video)from dvr to dvd recorder. audio stays the same.with extra single yellow (video) cord (usually sent with grey digital stabilizer)you will run from output of video stabilizer to input of dvd recorder.then run the video (yellow) plug of the composite cord from dvr output to input of grey digital stabilizier.hook up complete.remember video is the only connection being affected,run yellow output of dvr to input of grey digital stabilizier,then run extra(supplied yellow cable) output of grey digital stabilizer to input of dvd recorder,no need to run extra wires to dvr input,as that may mess things up! tom GET 2 HDMI CABLES,1 FOR SAT DVR.THE OTHER FOR DVD RECORDER,WIRE SAT DVR TO HDMI 1 & DVD RECORDER TO HDMI 2.THEN RE-RECORD MOVIE,WHEN RECORDING WATCH THRU DVD RECORDER OR HDMI 2.If You Wired it AS Previously discussed You shouldn't have anymore problems! PS,YOU ARE PUTTING MOVIE ON DVD DISC,RIGHT?
|
{"question": "I need instructions on how to hook it up to DVR and DVD recorder. All I get is blue screen. Can anyone help? I'm desperate!!!!", "document": ["This is a legit copy guard remover. It works exactly as described. It arrived well BEFORE the expected delivery date. I have copied a few VHS movies to DVD and a few movies off my DVR. It has no effect on the picture whatsoever. The instructions are not in English however it is a very simple set up. I highly recommend this product to anyone and I'm very satisfied with the purchase myself.", "I'm moving and must downsize my VHS tape collection from a medical course plus other educational interests but want to review and use the material in the future. The GREX stabilizer worked easily with my combo VHS/DVD deck once I figured out the hookup. I'm copying how to videos on photography, music and other educational material which were expensive at that time and more expensive to replace. With 50+ tapes to copy this was an economical way to keep the original material. Instructions were online and you need to connect the GREX to the deck correctly.", "I wanted to clear my DVR but had a few events which are NOT available for purchase. It was simple to transfer everything to my Panasonic DVD Recorder (without GREX, I received the copyright warning, and the recording stopped). 4 stars instead of 5 because it does not support HDMI (for high definition recording). But I freed up 60% of my DVR (I recently upped to high def).I recommend this product. Just go to the website for instructions, as all the pkg contains is what you see and the electrical cord.", "When I read the reviews on this product I was VERY optimistic, however, upon receiving the stabilizer....I found that A) no instructions were sent along with it, and B) the website does NOT have instructions you can download - only a simple diagram which does NOT explain exactly how to set it up. Unless and until I figure this out on my own, and I have what I'm sure most buyers have, a receiver, a TV and a DVD recorder......I will NOT be recommending this unit.", "I was looking for a way to put all our old VHS tapes on DVD before they disintegrate. This is the perfect product to bypass the copy guard put on VHS tapes to prevent reproduction. It was simple to hook up from the VCR to the DVD recorder. Took me about 15minutes to figure out the best recording set-up for my system. Be aware that written instructions DO NOT come with it, nor do cables. The instructions are easy to download from the company website and easy to understand. The cables are the standard video cables we all have laying around.", "I'm using this unit to convert Macrovision encrypted VHS tapes to dvd. Using a newer VCR with Macrovision detection as the source did not work as well as I would have liked. There was still a slight pulse in the finished product. I switched to an older VCR which had no Macrovision detection and it helped greatly, eliminating 99% of all of the pulsing. This unit does descramble the Macrovision encoding but in my experience, it may still need a little help at the source of the program material. I have yet to try it in any other situation.", "The recorder will stop. I love everything about this device just connect it with a video in/out cable and you've got yourself a great product! It works in all combinations: VHS to DVD, DVD to VHS, VHS to VHS, DVD to VHS, and VHS, DVD to other formats.I have no complaints about this device. Very simple! Images copy exactly as is seen on output devices. No form of degradation whatsoever.I'd recommend this product to anyone who wants to copy videos (Please don't do so for illegal purposes!", "I was able to copy 2 videos with my VCR to DVD combo and I started having problems afterward, I suspect is my recorder, It would copy the content from my VCR, but when I recorded to disc, I was able to preview the recorded material, after I finalized the disc, it would not play on aything, not even on the recorded I used to finalized the disc. I decided to use it on my computer instead, I hook it up between the output of my VCR and my computer and I have not had any problems, the recordings are very clear witha a few minor distortion lines here and there, but I am still using it between my VCR and my computer.", "In all cases, there is a little added noise from the GREX unit. It is a narrow pale horizontal bar of yellow shifted pixels about 1/6th of the way up the screen - I doubt most people would even notice, but if you play it back on a HD system, it is somewhat apparent, depending on how 'busy' and what color the background is. For duping shows off the DISH receiver, there is a little extra noise introduced by the repeated digital conversion (first DISH is digital, then output as analog through the GREX and re-digitized by my external DVR).", "Easy to setup (with common sense or else get instructions from website.) Works great for converting old VHS tapes to DVD. Cannot give it 5 stars mainly because of the slight flickering of the recorded picture on the tv. It is not due to the VCR. Tied to record from multiple VCR's and the flickering occurred from all of them. All in all it works as advertised."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,733
|
Yes
|
{"question": "WIll this one fit? Sodastream Fountain Jet Soda Maker Starter Kit", "document": ["This is a great looking tray that makes the Soda Stream unit look good (I have it on my bar), It keeps things organized and the drying stands for the bottles are really helpful! It is a little pricey, but if you are looking for something to organize and make your SodaStream station look good, I definitely recommend! I am using the Fountain Jet and it fits perfectly!", "we have the sodastream jet,and this storage tray fits everything perfectly without looking cluttered.i like my kitchen counters neat without clutter so this tray really makes me happy,no aggravation at all and my husband has all his sodadtream stuff in one area.we dont even have to remove the jet to make pop and carbonated waters and cocktails.its perfect for us!", "I love this organizer, it manages to help me keep all my soda stream stuff in one place. I have a Soda Stream Source, and it fits in the spot for the machine nicely. It was a bit touch and go there for a few minutes, because the added height of the organizer almost didn't allow it to go underneath my upper cabinets in the kitchen, but it did just barely fit. I like the spots for the bottles, syrup and caps, but I wish there was a space for an extra carbonator bottle.", "Having the extra overflow space for the soda maker itself is great, any extra that bubbles over doesn't spill over the counter.I do wish it were a little more compact, either smaller edges, or reorienting the placement of the soda maker and syrup holders. It takes up more counter space than I thought it would, and it adds height to the soda maker, so make sure to measure if you keep yours under cabinets. It has great rubber grips on the bottom, which keeps it from sliding around.Overall a good product, could use with a little tweaking.", "I have had my SodaStream for a couple of years now, and I absolutely love it! I do have to admit that I am quite the neat-freak, though. Consequently, it has driven me nuts that I have not had a better solution to organize my SodaStream accessories. The Mind Reader All-in-One Storage Tray is the perfect solution. I can now keep bottles, lids, and soda mixes all together and neatly organized! Disorganization is a huge pet peeve for me, and now I no longer have to search for the items I need to make that perfect bottle of soda.", "In my home, we drink a lot of soda. Probably too much, to be honest. To cut down costs, we switched to the SodaStream a couple of years ago. I love the eco-friendly nature, as well as the fact that with SodaStream, you're not limited to classic soda flavors. I often buy the tea and Crystal Light varieties rather than cola, etc.We have 2 different SodaStream units: The FountainJet and the Source. These units and bottles have different shapes and features. I was thrilled to see that the Mind Reader All-in-One SodaStream Storage Tray can accommodate both models and their respective accessories effortlessly.", "Just got this today and it has to go back because my Pure model carbonator will not fit even kitty corner in this. I really like the drying rack part but only units with smaller bases will fit so it is useless for me. I give one star for any product that fails such a basic requirement as fitting the item it is designed for.", "The top rim of the bottle sits down on the rubber mat, trapping air and water inside. I'm afraid that will prevent the bottle from drying quickly. Both the small and large syrup bottles fit in their holes just fine. All in all, the only problems I have with this tray is with the one liter bottles. It's not a deal breaker for me, but I knocked off one star because of it. If I only used the half-liter bottles, I would have given five stars.", "I read from another reviewer that their model of soda stream didn't fit. I didn't think I would have that issue because the picture on this listing AND on the box shows what appears to be the exact same model I own...so I thought it will definitely fit. Nope. So I implore the next person who's thinking of purchasing this item to ask the seller what units actually fit in this tray. You'll save yourself a bit of headache. Gotta say though, it would be a great little organizer if you can actually use it.", "Well, this says that it fits all the Sodastream models. It did not fit mine, so be wary. They should list th models it does not fit."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 188,766
|
Mine are. (purchased late 2012/early 2013)
|
{"question": "Are these 100% stainless steel? I ask because reading some replies stated that they were not. Thank you.", "document": ["I cannot verify their accuracy, but Sur la Table has a 100% satisfaction guarantee. They're rather expensive. Including shipping, they'll set you back $65. However, the 1.5 and 2 cup probably use as much steel as the smallest 4 cups combined. That makes it almost like two sets, and the price is just a little more then 2x the cost of the MIU stainless set, so it's really not that extreme a price.Happy Baking!", "This measuring cups is way over price. I just got mine today and the stainless steel cups is thin and light, not 18/10 as stated. The knife went through the heart when I saw that it was made in China!!!!!!!!! (that was how dissapointed I felt). I rated it a 2 stars because I like the 3/4 cup option, otherwise a 1 star for me.", "Cups don't flip over or melt in the dishwasher. Stack neatly in cabinet and don't take up a lot of space when stacked. I am 100% satisfied.", "I love these measuring cups! This is the only set I found that has more than 5 measurements. Thank you for the fast delivery too . I really appreciate it! Sincerely , kiana", "What more can I say? Got rid of all my plastic garbage and replaced with glass or stainless steel. These are wonderful!", "I love having a stainless steel set that has every random measurement! We use them all the time and they're holding up nicely.", "This is just what I have been looking for.... for a long time. All I asked for was stainless steel and more cups than most sets which seems to be 'four'.........Hard to find. These are really nice. I definitely reccommend them to anyone.", "These measuring cups are made of thick stainless steel and have long handles. I have no problem setting them on counter, they do not fall over. I like the fact that it's a set of 7 variable measures.", "This is the best measuring cup set I have found. Very heavy stainless steel for strength. I love that the size of each is stamped deep into the handle of each cup. I am happy that this set has a full seven pieces.", "These stainless steel measuring cups are heavy duty and look high quality. I anticipate having them in my kitchen for years and years to come. So nice to upgrade to the MIU France 7-Piece Measuring Cups."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,780
|
Per the owner's manual, it can handle up to 40gb total. So if you have an 8gb player you can get a 32gb card and it is suppose to work. You can download the user's manual in pdf form at www.sandisk.com.
|
{"question": "Can it be successfully expanded to 32gb or more?", "document": ["You have to tap over to songs to make sure it will shuffle all the songs instead of a select 10 songs and do it every time you switch from the radio you will have to do so.I had purchased a 32gb microSD to use with this player but it didn't recognize the sd card (said it wasn't formated correctly). It also was unable to format the SD card making it a useless purchase. I took the 16gb microSD from my old Fuze and put it into the Fuze+ and the Fuze+ still didn't like it (same result).", "I won't recommend the SanDisk Sansa Fuze+ to my worst enemy!! !SanDisk should have never gone to the Touchpad on it's players. It is a pain to use. Sometimes you press it and it goes where you want, other times, you have to keep pressing and pressing until it decides to go where you want it. The dial wheel was much easier to use.Also, I had problems with the 32gb SanDisk microSDHC card I purchase to go with this player. The player keep saying that the card needed to formated into \"FAT32\" even though it was.", "The card was already formatted to fat32 and when I tried to format it through the device itself the Fuze+ would say that there is no card in the expansion slot. I used 4 different microSD cards(32gb, 16gb, 8gb & 512mb) and the Fuze+ would not recognize any of them. All four of the cards work and are recognized on Windows 7, Windows Vista, and Ubuntu Linux. I proceeded to download the newest firmware(02.38.06) for the Fuze+ hoping that this would fix my problem but this did not work.", "My old Fuze saw the 32gb just fine.I had managed to record a radio program I wanted to listen to but when it was finished I had a devil of a time finding it. Again the touch pad was inprecise enough for it to be a struggle to choose the right menu. Also as I mentioned the Fuze+ is slow, maybe it's a issue with the firmware (as I've read online) or maybe it's just not suited for the Fuze+ feature performance.My advice is to skip this player. If you have a Fuze or other player that can be upgraded with a flash card then keep using that until Sansa gets it right again.", "This is my first Sandisk player. I took note of all the bad reviews and took a chance anyway. The main reason being it's one of the few players rated compatible with Rhapsody. I'm happy with my 5 year old Creative Zen 8gb, but my music collection has grown considerably and I needed more memory. The Fuze + integrates well with Rhapsody and unlike my Zen, licensed wma tracks also play from the microSD card up to 32gb and that's a major plus. Zen's external memory was practically useless.I purchased this from Amazon with 2 day shipping and it arrived the next day, I bought the Sansa accessories kit recommended as \"frequently bought together\" with the player, but it was the wrong one, it was for the Fuze not he Fuze +.The Fuze + does not come with it's own music management soft so if your not using Rhapsody you can use Windows Media Player to transfer music and create playlists.", "I decided to purchase this product mainly because of its great support for many audio formats, including FLAC and OGG. I also liked the fact that the storage can be expanded by adding SD cards, which can also be easily swapped for almost infinite storage capacity. The audio quality of this unit is also decent.Unfortunately, all of these good characteristics are ultimately destroyed by a very low level but highly visible problem: HORRIBLE USER INTERFACE!This media player is almost unusable in it's current form. Sandisk took the concept of a capacitive touchscreen and tried to transfer it to a small area _under_ the display, to allow for \"swiping\" navigation.", "was working great untill a week ago when it started skipping songs and turning off on it's own. This is happing with no water damage or being dropped", "very good everything but, the touch pad and interface in general.i have a medical condition that makes my hands tremble a little, but even my friend who has steady hands said the touch pad is to sensitive. plus there are to many commands. combine the sensitive touch pad + complex controls + my unsteady hands = unusable (for me at least)otherwise its great, sound, battery life... all are great just the touch pad is sensitive and the interface is complex.", "touch pad doesn't work unless you hammer it. Instruction booklet is useless. This is a piece junk not wroth your time or money don't buy!! !", "this is a very basic MP3 player for music. havent tried the video yet so i cant comment on that but when i downloaded my music from WMP it did not down load the playlists i created so no i have tons of music but no idividual playlists; those have to be created manually. the back, fwd, up & down buttons are almost useless. i have to press hard and even then somes it works sometims it doesnt. just overall it feels cheaply made and in my opinion a very cheap product...I'm extremely dissapointed."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,797
|
The volts are fine. The 3.6 and 3.7 are only the average voltage discharges. A fully charged battery of this type will start at 4.1 or 4.2 volts. The mAh number is only telling you how many hours the battery can provide one milliamp of current before it needs to be recharged. So, the 3.7 volt battery will outlast your 3.6 volt. You may experience shorter overall battery life by charging the 3.7 volt battery with a 3.6 volt charger, however. How much shorter? I don't know... but it's probably negligible.
|
{"question": "My original battery was DMW BCK7PP (3.6 v, 680 mAh) for Panasonic Lumix model DMC TS25. The listed battery is rated 3.7 v , 940 mAh. Compatible?", "document": ["This is the real thing; a bona fide Panasonic brand camera battery. It is more expensive than the off-brand replacement batteries, but it should work seamlessly with all Panasonic cameras that use this model battery. I previously purchased a much cheaper off-brand battery,Maximal Power DB PAN DMW-BCF10 Secured Digital Camera Replacement Battery for Panasonic DMW-BCF10 (Black), but myPanasonic Lumix DMC-TS2 14.1 MP Waterproof Digital Camera with 4.6x Optical Image Stabilized Zoom with 2.7-Inch LCD (Yellow)displayed \"THIS BATTERY CANNOT BE USED\" message after 4 seconds or being turned \"ON\".", "Battery INCLUDED with DMC-FH20 box:MODEL NUMBER: CGA-S/106BVOLTAGE/CURRENT/POWER:3.6V / 740mAh / 2.7WhTYPE: Li-ionREVIEWED battery described in this listing:MODEL NUMBER: DMW-BCF10PPVOLTAGE/CURRENT/POWER:3.6V / 940mAh / 3.4WhTYPE: Li-ionBoth batteries are recognized by the Lumix DMC-FH20. I just got the spare battery. My guess, based on the current-hours and power ratings, is it will stay powered longer than the original, included-in-box battery.", "These Pansonic Lumix DMW-BCF10 Batteries exhibited problems from the start and failed in 6 months of light use. Original Lumix batteries lasted over 2 years. Expected better buying factory replacement batteries. No support from Panasonic, warranty only 90 days.", "Amazon recommended via email to me the Panasonic DMW BCF 10PP battery for the Panasonic Lumix DMC-ZS5 camera I purchased from them about two weeks ago, but from the reviews it is very unlikely that the DMW BCF 10PP battery can be used for the Lumix ZS5. I need the DMW BCG 10 PP battery, but it does not appear that Amazon sells it or that their partners sell it. Regardless whether it is Amazon or an Amazon partner selling the product I think Amazon should read their reviews and make sure Amazon email recommendations to us are correct, especially when the recommendation is to be used with a product they sold to us.Panasonic Lumix DMC-ZS5 12.1 MP Digital Camera with 12x Optical Image Stabilized Zoom with 2.7-Inch LCD (Silver)", "Ordered this battery for my Panasonic DMC-TS3. It does not work. Turns out to be a 1000mAh, rather than the 740 advertised. Also rated at 3.7V. The camera requires 3.4V. This is not the equivalent of the Panasonic BP-BCF10PP. Don't spend the money.", "I was worried that the -PP designation would be an issue given Panasonic's new firmware, but this battery is labeled \"DMW-BCF10\". The replacement is virtually identical to the original that ships with the Lumix DMC-TS3. I'm new to the camera, but all the reviews I've read suggest at least a battery per day you expect to leave it on, especially with all features running. I'm glad to have an authentic extra on hand.", "Outstanding additional battery for my Panasonic Lumix ZS-7. Same battery as the original one supplied when purchased. Lasts for 275-325 pictures (even with GPS on).", "This battery does NOT fit the Lumix model ZS7.The battery for the ZS7 is DMW-BCG10PP. Notice the \"G\" instead of \"F\" being the difference between the product numbers.I had a lot of difficulty finding the correct battery for the ZS7, so I'm hoping this helps other customers to avoid some confusion, delays, or returns.", "Quality battery. It is necessary to use the genuine Panasonic battery with the Lumix DMC-TS25. Knock off batteries are not recognized by the camera, so you are wasting your money to buy them. I have not had this battery long enough to evaluate its longevity, but other Panasonic batteries I have used have performed well.", "This battery is a factory Panasonic Lumix battery. I used it in my Panasonic DMC-TS2 and charged in the factory charger and worked in my camera just like the original. I bought a new camera shortly after, a Panasonic DMC-TS3 and works in that camera as well.No problems here."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,799
|
Any switch you cut off will disable that sections (3 ports,) the total ports data as well as power.
|
{"question": "Do the switches cut just the 5V power to/from the ports or also the data wires? Because some peripherals draw power from the data wires only... :o", "document": ["Big pluses are the control that the switches give you, the LED lighting and in-use indicators (there's an indicator for each of the 9 data ports), and the beefy power supply.It also includes a 3M adhesive strip if you wanted to adhere the hub to a desk or something, but I didn't want to permanently attach it to anything.Finally, it has a 1 year warranty.If you want something smaller and with fewer ports, then I recommend this hub which I use with my notebook:HooToo HT-UH002 USB 3.0 4 Port HUBShould I encounter a problem with the hub or anything else change then I'll update this review, but as of now this is my favorite USB 3.0 hub with more than 4 ports, so 5 stars.", "The hub comes with three banks of three USB ports each. Each bank of ports can be independently turned on or off. The little bit of environmentalist in me likes to think I'm limiting phantom power usage by switching off unused chargers and peripherals (although I'm not totally sure turning off the ports stops power from flowing to the strip). Organizing the USB ports into banks has lead me towards organizing my peripherals by task. I will normally keep my mouse and keyboard on one bank, my data (usb sticks or drives if I'm using one) on the second bank, and several gadget chargers on the last one (and on the charger only port).", "The three power switches for the nine data ports are a nice touch, although I do not have a use case that would necessitate a set of ports being powered off.Currently, I have six ports occupied: Two external USB 3.0 hard drives, a printer, an Apple Cinema Display (to power its own three USB 2.0 ports), and a mechanical keyboard, which requires two ports, one of which is for the keyboard's two USB 2.0 ports.I was initially concerned I might run into issues with the USB 3.0 drives connected via the hub, as reviews for other hubs indicated issues with disconnections and sleep.", "Since it is a powered hub it fully powers each port (where the USB ports on my laptop have to split power between them when I am trying to charge more than one device). I also like that the last port (on the end of the unit) is not a data port. This port is designed for charging only and will not connect to your computer. Some reviewers don't seem to like this, but I've always been annoyed that connecting apple devices opens iTunes when all I was trying to do was charge.", "It's also \"fuse-protected\" and includes \"overvoltage protection\".It's backward compatible with USB 2.0 and USB 1.1.To make 10 ports, it includes a \"charge only\" port at the end of the unit on the opposite side of where the USB-in and power-in connectors are. It can be used to change a USB device like an iPad. There's even a separate switch for this charge port. Just don't forget that this is not a data port.This is my favorite hub with more than 4 USB 3.0 ports.", "I did not do the extensive testing some have already made but I'm very pleased with the Satechi 10 port hub. I had hoped the high power port would also be a data port but it was clear in the description that it wasn't before I ordered. I have one high power USB device that I was hoping to move from the computer to the hub, but moving most everything else to the hub gives me free ports on the computer.I have 2 disk drives (one USB3 and one USB2), 2 USB video tuners, an assortment of slow USB1 stuff that allowed me to get rid of one small hub, all plugged in.", "The Satechi 10-port USB 3.0 hub arrived a few months ago. We have put it through the paces, it's been reliable in permitting us to use the 3 banks of USB ports, as needed. We appreciate having a true iPod port (on the far right end) with enough power for those demanding Apple devices. There are 3 switches on the front left of the hub to control each of the 3 banks of USB ports. The tenth port (iPod port on right end on the side) also has a small switch.", "Wonderful for managing my backup drives, card readers, dvd burners and other peripherals. Love the ability to selectively turn off ports from the hub, allowing me easier access to powering down drives. Also love the thoughtful detail of the quick-charge iDevice port on the end. Plus it's attractive on the desk and easy to find where the ports are in a dim environment.", "The product works great. I can connect 2 printers, an iPad, an iPod Touch, my Android phone, a joystick, USB Flash drives, and any other devices no problem. I don't use it for external drives, so I can't speak to that. There are only two issues I have which is why I gave it 4 stars instead of 5:1) It would be nice if the iPad port would also function as a data port for computer communication/syncing with iTunes. Instead I have to switch ports when I need to do this.", "Terrible design; the USB cable constantly falls out.Also what is up with all the goofy switches? I have no need or desire to disable USB ports on a hub. They need to stop with all the goofy \"features\" and just built a clean, simple hub that has a permanently attached cable.== Update 23 Nov 13 ==Satechi has replaced my hub with a really nice aluminum one so hats off to them for excellent customer service.They even paid return shipping!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,814
|
No. But it's close. The nex6 uses an AP-C size sensor where the 10 only uses the 1 inch sensor. Bigger sensor will always out shine a smaller sensor in image quality. But again, not by much in this case. Now, the RX10 has many more things going for it though. If you don't care about it being bigger I would recommend rx10 in a heartbeat!
|
{"question": "How does the image quality from this camera compare to the image quality of photos taken with the NEX6? I'm concerned over the R10's smaller sensor.", "document": ["This is still really good! But you can't compare an f/2.8 lens on the RX10 to an f/2.8 lens on an ILC, they mean different things.So in the end, the camera does not work for my needs. I need to take photos of gymnastics competitions where I'm inside a poorly lit building 100-200 feet away from the kids I'm taking pictures of. However, if the kind of photography that you want to do doesn't need that kind of zoom, this is an awesome camera with a great lens and sensor.", "I am looking to lose the system camera way of doing things.and The Sony RX-10 has been making me very happy..I admit to also having a Canon Super-zoom i take moon shots with, but with the smaller sensors I just can't be thrilled with the over-all image quality. My next camera will be a Fujifilm X100s with an APSC sized sensor and a fixed Fujinon 2.0 35 mm equivalent lens. A runabout easy to carry high quality image, fun, oldschool-like range-finder-like camera for getting extra detail, and looking a bit stylish while I do it.", "I needed a relatively compact camera with good reach and video capabilities and was surprised at how well this camera fit the bill. I previously shed my pro-level dslr for smaller mirrorless solutions (Fuji x series) but still needed something for my kids sports and events. This camera not only has a great focal range and speed, but amazing image quality. The Zeiss lens is perfectly matched to the sensor. The camera also feels great in the hand and is a pleasure to use. I was a little reluctant to buy at first as I do not like the quality of images and video from most bridge/zoom cameras; but the much larger sensor and quality glass on this makes it a cut above and worth the price.", "I just got this camera and got to use it over the Thanksgiving holiday. I LOVE IT! Once I learned about this camera, I immediately sold my Sony NEX6 and my Panasonic FZ200 and I don't regret it one bit. The RX10 pictures easily match the quality of my NEX6. I am very impressed. I took it to work this week to compare it with my co-worker's newly purchased Panasonic G5 (Micro-4/3)... We took pictures of the same objects at the same angles with the same zoom.", "This camera isn't cheap, but does the job of more expensive cameras with several very expensive lenses, etc! This was an upgrade for my great old Sony HX200 which I loved. You won't go wrong with this RX-10! A fun, easy to use, very high quality camera that takes TERRIFIC photos!Here's a link to some of my first photos taken with it:[...]", "Documentation is poorly done. Canon and Nikon's detailed User Manuals are downloadable, or contained on a CD that is packaged with some of their higher-end products, and contain very good Illustrations, Photos, and detailed Operational Instructions. Repeating - this new Sony DSC-RX10 Camera Product \"is\" an excellent camera, very advanced for a Point & Shoot, is well made, and captures images superbly, thus a 5-star rating. This unit is more like a smaller A77 Alpha Series DSLT product but with a fixed Lens, and 1\" Sensor vs. the A77's slightly larger APS-C Sensor.", "Now we're getting to see if it holds up to trials.Note that i'm reviewing this camera mostly for its video abilities, it does do great photos, but i won't be focusing on that. I've uploaded some video frame grabs into amazon's gallery that i'll reference here.The sensor.No, it's not full frame, no it's not aps-c, no it's not m43, and no i seriously don't care. It's no secret i'm at odds with big sensor fanboys. Since aquiring the C100 (aps-c) my 5d mark 2 (full frame) gets very little use.", "My dream of an everyday, all purpose, solid, great performing camera has become reality. Sure, there are cameras that take better pictures and there are lenses that outperform this camera's lens and there are smaller cameras with longer lenses. But, this is the first one I've found that does everything very well.The lens is extraordinary. The camera performs well. The menus work well. And, best of all, the image quality is better than I require. Expensive? Yep... but when compared to an SLR with an equivalent lenses... not so bad.", "The lens on the RX10 is exactly that, it's a seemingly parfocal, fast, constant aperture power zoom lens which goes from reasonably wide, to reasonably telephoto, you also have an up to 2x digital crop called Clear Image Zoom, which is somewhat loss-less. It compares to the GH camera's ETC mode, which just means it's taking a smaller portion of the sensor to create the 1080 end image, and this should result in no resolution loss since these cameras are in fact photo cameras with many more pixels than is needed to make a 1080 video.", "I have owned several point and shoot cameras and entry level DSLRs, but none of them come close to the RX10. Quality construction, easy to use menus, and unbelievable image quality. It's not cheap, but once you start using it you'll realize that it's worth every penny. The constant f/2.8 aperture and 200mm zoom range of the amazing Zeiss lens coupled with the 1\" BSI sensor makes this camera the most versatile fixed-lens shooter ever created. 10 stars.If you've got the cash to spare, buy this."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,819
|
It came with windows 7 home premium installed.
|
{"question": "Does the computer come with the software already on it?", "document": ["I needed a small computer to take on long trips that was light weight with a real keyboard. This is my second small Acer....I spilled something on the first one's keyboard...so this is my second one..This one is even better, more memory and preloaded with software.Great price, light weight, and the keyboard is perfect.", "It's very slim and Compact netbook for those who travel often. I purchased for my Little Sister. It's great to work.Somehow the Unit I received has WebCam Issue. I tried with all Drivers/WebCam Software But nothing works.Rest all Good. Recommended for Girls who use PC for Surfing and Mail Check.", "Shipped very very fast, This computer is great and very nice, it does not look like it was refurbished. I will do business with them again. Thanks", "Also you can't use a flash drive to make a recovery disk since it has not cd/dvd drive. This computer is brand new but I am having second thoughts even though it got great reviews and it has windows 7 premium on it since I am not fond of windows 8. Any suggestions or feed back on what I can do please let me know. I thank you for your time and for reading this.", "So that makes me a little nervous about this netbook not being able to find parts for it.Does anyone know where I can find a battery for this online? Acer does not carry them which is very strange and they don't even show this computer after I bought it 3 days ago. That makes me nervous. If I can't find any of the parts I will need to send it back.Does anyone know how to make the battery last longer on the one I have and if you do could you please explain it to me.", "if only it had usb 3, it would be perfect. It's a plain vanilla largish-screened netbook, but very well thought out with perfect plain-vanilla performance", "i bought two of these for my grandaughters. very satisfied, with one exception. audio volume. can barely hear even with volume adjusted to highest level. if there is any other noise in the room, forget it. definately need head phones with this netbook.", "came with the battery damaged", "This is an upgrade for me from my previous Dell Mini Inspiron which I thought I was happy with until now.If you have a couple hundred to spend on what will be a nearly obsolete piece of equipment by this time next year then by all means make yourself happy by getting one of these affordable refurb Asus Aspire 11.6\" inch netbooks! I have to admit - I think I'm in love, LOL! :)", "Thin, beautiful, price is good for what you get. I bought this and now I have an extra 600 dollars I would normally spend extra on a mac air. Get this- I can play Halo on it and the screen is clear (HD). Thanks Acer-I hope this will last at least awhile before Macs decide t0 get cheaper while maintaining the quality-not gonna happen but I am happy with this-perfect for all day at college for papers (over 5 hours of battery (tiny battery) -I want to get an extra, or a bigger one then it would be 5 stars but lees than 300 is cheap."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,827
|
Ours started leaking through a hairline crack in the shaft of the blade assembly. I've replaced two in the 9 years we've owned our Cuisinart blender. Both times for the same reason. This new one seems substantively sturdier (fingers crossed).
|
{"question": "Why does my Cuisinart blender leak? I replaced the gasket and it did not help.", "document": ["I am very satisfied with the Cuisinart Blender Blade & Gasket I purchased.Shipping was very fast and purchase transaction went very smooth. Glad to have my blender/food processor back in working order.", "I'm so excited to share that the Cuisinart blendar my husband got for me when we got engaged in 2006 is now working again. We replaced the blade and it's blending everything perfectly now.", "This was a replacement for an original cutter blade that cracked after years of use. This part fit perfectly and restored like-new blending and chopping to my Cuisinart blender. It even came with the rubber gasket.I'd recommend hand-washing the blender base and cutter blade, since the original one probably cracked due to the drying heat of my dishwasher. Just be careful, though, since this thing is really sharp!Great replacement part to keep your blender working like new. *** Update after 4 months of use ***The cutter blade is having similar problems as my original Cuisinart blade - it's starting to get really tight in the shaft (huh, huh!)", "Since I was able to get this part, I was able to save my Cuisinart SmartPower Blender (BFP-703 Series).The part arrived fast and was very easy to replace. It even came with the washer that others are selling separately. While I'm still looking at eventually upgrading to a really high end Vitamix or similar blender, this was able to help me prolong the life of my once $100 blender. I used it tonight flawlessly. Very pleased.", "Replaced my locked up blade and blender is as good as new. Would buy again if I needed another blade.", "I believe all replacement part for this expensive blender are now of the worst quality ever! This is the second blade I have replaced in less that a year.Not sure if it is because they are "made in China" but certainly this particuar part lacked quality control. The blades wer dented and the bottom part broke aftter very few uses.", "No better than the one I replaced. It still binds up after using it for a while. It works, but it is hard on the motor. I wish they would redesign it.", "Great shipping and a great product.Received the rubber gasket as well, which was unexpected,so thanks for the bonus.I will probably be ordering another one within a year because that's about how long this blender blade will last before it seizes up.", "I purchased this blade after I had a mishap with the existing blade I had. It fit perfectly and didn't leak. It was definitely better than having to purchase a whole new blender.", "I can't remember how many of these I have purchased. I wash them in the dishwasher and they eventually crack along the shaft. The rest of the blender is fine so I figure it is worth it to just replace this part when it breaks. My blender gets daily use making protein shakes. Came with a gasket, but they never seem to go bad."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,852
|
This unit can only be piared/connected to one source at a time.
|
{"question": "How many devices can it pair with Simultaneously?", "document": ["Connect the RCA cables to an audio input in the receiver and plug in the power and you are ready to go. To pair a device press the button on the front of the adapter and turn on blue-tooth on your device. Then just tap on the name of the adapter and you're ready. We've been able to stream music from TuneIn, Rhapsody and files from throughout the house (1100 sq ft) including upstairs. There is some skipping but we've noticed a difference depending upon the device used. Our iOS devices never skip and our android often skip quite a bit.", "Everyone knows that the biggest problem with Bluetooth speaker systems is that the range is often too short. Go to another room with your device and often you find you lose your connection and are forced to re-pair your device. The Amped Wireless Speaker Adaptor looks to solve that dilemma by proving you with an antenna that will amplify the Bluetooth signal to double your range. It’s quite simple to use; just plug in the adaptor to your stereo system or speaker with the included cable and pair up your device.", "This device worked well with my Android tablet- decent range and sounded fine, but did suffer some drop-off issues every 15 minutes or so where there was a few seconds of audio on and off. In comparison to being plugged in, it seemed like some mid to low end frequencies were missing when streaming over bluetooth.I spent quite a bit of time trying to get it to work with my Windows 7 computer. I was able to pair it, but not stream audio. The instructions included in the package and referenced on the support site are only for Windows 8.", "Set this up, paired my Motorola Droid Razr Maxx, played music. Till I went to change the volume on my phone the audio cut out. Pause the song and hit play again, audio would only come through very faint regardless of volume level set on the phone. Only way I could get it to play again was to un-pair and re-pair. GS4 worked flawlessly, so did an iPhone5. iPhone4S couldn't find the device to pair. Called tech support, was told to return the device and get a new one.", "Great BT audio receiver! Connects instantly with paired devices within range. I use it most often to transmit from my iPod, tablet or laptop to my home audio system. Excellent product!", "If you want it to work with another device, it may or may not work. It definitely does not like working with my HP and Apple computers. I have to presume that contrary to statements on the website to the contrary, this unit is not fully compatible with all Bluetooth standards.For what it is worth, my laptops connect and work just fine with several other Bluetooth devices including Sennheiser and Bose.", "I have tried other units from Logitech, Belkin, etc. They all sucked. This one works!I have this unit sitting in my media closet on the first floor of my house. It is connected to a Russound media controller for whole house audio. I can stream from my laptop, tablets, phones, etc with ZERO dropout from any room in the house including the 2nd floor and the basement!The BT setup was a snap and automatically reconnects when entering the house.The device shows up in the list of BT devices as "Amped BTSA1 F09." While you cannot rename the device, I have confirmed with Amped that the devices have different name suffixes.", "The Amped Wireless Adapter did ok for about 40' away which was okay but not as good as the Miccus. One additional note (which was the deal breaker for me...FOR WHICH I COULD NOT GET A GOOD EXPLANATION FOR...even after calling Amped Customer Service). The Miccus worked great with all devices...The Amped worked fine with my wifes phone (Blu Life View & my Samsung Tab3 7.0 but I could not control the volume with my Motorola RAZR Maxx..(It would either go from mute or low volume..when you raised the volume rocker with the phone it made no difference....even though the range was already better with the Miccus this bugged me & I wanted to find an explanation...NEVER FOUND IT....The Miccus works superb...easy choice for me!", "The unit includes both 3.5mm audio and RCA outputs which is very convenient. I had it up and running and playing music in just a couple of minutes. It really is that easy!I had no problem taking my phone into another room, down in the basement, and even out on the back patio without dropping my connection. Granted all of those ranges have been within 40 – 50 feet but it’s still nice as I have had many Bluetooth speakers that will drop when in the same room.", "UPDATE: 21 April 2014I contacted Amped Technical Support via e-mail and they had me return the unit to them. Of course, it was at my own expense and they recommend that I have tracking since they are not responsible for any returned items that do not show up. It took me a couple of times to get an RMA from them, but I finally got one and I returned the unit ($12). They sent out a new unit to replace the one I sent in and this one appears to work."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 188,858
|
This card is very small and I'm not familiar with the mp3 but I would assume that it would work. However the card stopped working after a month and e-mails to the manufacturer regarding the problem went unanswered. You might not want to purchase one, given the cost, if the card only lasts a month it's not worth it.
|
{"question": "Are these songs on a standard micro sd that will work in any mp3 or something they have made to fit special units?", "document": ["We thought we were buying an sd card to play music from any device that takes an sd card. It is a mini but doesn't work when put into an adapter. Only way to play it is to buy a slot radio player which apparently they don't make anymore. We couldn't return it because it had been opened. BUMMER! !", "This is a great value for 1000 songs. And it really is a plug and play pre-loaded card. Simply do requisite battle with packaging, plug the micro sd in (Sansa Clip+ in my case), allow the player a couple minutes to 'refresh media' and it's all there.So far, as I am new to both the Clip+ and the card, I am listening in random shuffle mode, skipping forward when I don't like a song. In this mode, I would prefer the card were not pre-sorted by 7 categories and did a shuffle of all content.", "Way too expensive for the old songs it contains. It's designed to fit my sandisk but it costs as much as the sandisk itself.", "this product is wonderful,, the songs are great and sound very clear,, great for walking or any kind of exercise.. brings back good memories , keep in beat with the sounds as you work out ..", "I really love the slotRadio cards. I have two[rock and Motown] for my Sandisk and use them constantly at work. I don't like the hassle of finding music online and downloading and the price is well worth for how many songs are on it.", "Does not work like advertised as there is no music so must return it! I must return it ASAP for another.", "I needed a way to listen to my favorite artists and you provided that. I do enjoy my music as I work in the yard or if I want to relax in the sunshine. Thanks again", "The slot Card must have every rock music song since 1980. There are some classics still playing on air and some very obscure works from even more obscure artists. It's a refreshing experience to not know the next song in order and have to press buttons to identify the artist. The only down side, which is why 4 stars, is the heavy metal section. It is really bad. There are about 3 featured groups, none that easily stand out, and every song they made must be on this disc. They all sound the same; different words but same tempo, base thump, vocal style.", "It's OK but it should not contain what I think are class B songs. Class B songs are the songs that never were on the top 10.", "Only down side is you have to listen to the songs in the order they were downloaded. Can not go back and listen to a song you may have liked. Other wise works great for my need."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,884
|
It is just excess sugar. I've found that some types sugar/floss does this more than others. You can snap the sugar ring into small pieces and put it back in the machine and it will make more cotton candy... It doesn't need to go to waste.
|
{"question": "How come thise machine throws so much sugar onto the sides? Am I doing something wrong?", "document": ["it works great, though there are couple problems. one -when it spins it vibrates and the metal drawer comes out constantly so i ended up taping it. two- after the sugar spins and makes the cotten there is so much left over sugars on the sides... wasting (i think at least half the sugar) either than thiese it works great.", "I purchased this machine for my office and it has been a huge hit! We have enjoyed the Great Northern Popcorn machine and felt the need for something sweet to serve as a special treat for employees. We ordered the cotton candy machine- along with the very necessary dome (sold separately) Much to my delight it arrived promptly! After finding a youtube video demonstration on how to make cotton candy, we got to work. The machine works beautifully, and makes delicious, fluffy, cotton candy just like the fair- without all the crowds!", "But I'm pretty sure this is normal for a cotton candy machine? I feel like when you watch youtube videos of people making cotton candy, all the machines have hard sugar around the sides & the sugar washes off super easy.-- This machine will totally work for a big birthday party or small fundraiser. It takes maybe a minute to make a cone, if even that.-- I'm sure you already know, but just in case you don't... If you buy the pre-mixed cardboard cartons of cotton candy sugar online or at smart & final, they are convenient, but a little pricey for what you get.", "I seriously love this purchase. I will try to remember to review it again a year from now, though...because that's the kicker, isn't it? For $250, we'd like this thing to last at least a couple of years...but no one ever tells you how long their machine lasted, or whether it worked well for the duration. And really, that's something we'd all like to know...so I'll try to do that.A few tips and FYI...-- One scoop (1.5 TBS of sugar) makes a decent size cotton candy cone.", "I use this machine for the first time last week since I got it, the candy are fine the only thing is that it waste a lot of sugar and it vibrates a lot on the table and make to much noise wish their was a way that I can fix it from making so much noise.", "Mine didn't come with the metal measuring tool that it was supposed to, but I ended up just filling up the center to full, spreading it around and topping off. It produces between 6 & 7 candy cones when fully filled. Also, a quick tip. You can make your own cotton candy cones with plain white 8x11 copy paper. Much, much cheaper. However, sometimes it can slide around on the cone if you don't pinch it at the bottom of the cotton candy to provide a base. But again, much more economical if your kids are just going to eat the candy and throw the cone away.", "We used to rent a machine every year for our big summer party (60+ people). I decided it would just be easier and cheaper to buy our own. It has held up very well, and can handle large amounts of people. It is messy, and I will probably buy the shield at some point, but until then I just wear washable clothes and end up looking kind of shimmery from all of the sugar. The machine itself cleans up very easily, much more easily than I anticipated.", "I purchased this after searching for quite some time to find one that would fit my needs as I originally purchased the small household one with much disappointment in the performance. My intentions are to use this for personal use. It was used for the first time today and I can't tell you how excited I am from the results. Read the instructions on how to use the machine and you will not fail. After letting the machine warm up for the recommended amount of time, I poured the scoop full of sugar in and the floss resulted almost immediately.", "This model throws a lot of sugar to the side of the bowl instead of allowing it to become cotton candy. The first model we bought we had to return as it threw most of the sugar to the side instead of allowing it to become cotton candy. Amazon was SUPER good about the return and the second unit does work better. Although it arrived with one of the feet of the machine bent (I assume in the shipping process). It will have to be unbent to make the machine stable. You will be able to use this machine to produce cotton candy as a novelty at your kids parties and other gatherings like that; however, dont expect you will be able to use this machine as a way to fund raise.", "Like a lot of the other reviews ours was dented on one corner, but the bow was fine. Wierd. We have really had a lot of fun with it. My only complaint is that it wastes so much sugar. I think about half of the sugar I put in gets flung in a ring around the edge and is wasted."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 188,889
|
I'd say use a variable with it as the noise level at 12 volt is high
|
{"question": "I'm running this mic for a car audio setup, and I already have a 12v supply as well as a 5v supply as options. What voltage should I supply to it? Thx", "document": ["I have this microphone set up outside and connected to the 'audio in' on a 7" LCD TV. The sensitivity is good, it can pick up a conversation clearly out to about 40ft. I've left it out in the elements, rain and lots of sunshine and it continues to work well. Remember you'll need a power source and cable for it to work. A 12v DC power supply sold in the 'security cameras' section of Amazon will work as will any of the RCA video/power cables sold in that section.", "For this reason, I only give it three stars. If you are a mind reader, or have used this product before, then you know it requires a 12v DC power supply. If you are a first time user, then you have to stumble upon this with lot's of research. No where in the description here on Amazon does it state this. I'm sure the seller gives the descriptions to Amazon so I can't really fault Amazon for this.For this reason, I only give it one star... but, the price gives back two so it nets a three star review.", "Lost... How do you run with camera that already has mic? And how do you plug it in? Please help", "Just as stated this is a sensitive audio pickup. I have it on the front porch and that makes the audio 'bassy', but I can hear a car coming anywhere on the block. I've run it through a CAT5e pair and there is some noise (to be expected on a 50' unbalanced cable run) but overall it is quite acceptable.", "I got this mic to use for a baby monitor, and it has been working well! We can hear the baby really well, even when using a white noise machine. great product, especially for the price!", "I attached this mic to my ACTi camera that I use as a baby monitor and it works better than I could have ever imagined. It works so well that I can hear my son breathing from across the room and can hear the clock ticking. Highly recommend this mic.", "For the price, I'm happy with this.This came with large (hand sized) red security monitoring warning stickers (nicer than shown in the picture).For a dollar more, the same company makes a version with 2 DC power connections (male and female), that allows you to share the 12V connection with the camera if you wish; I also purchased one of these versions.I'd recommend this for security system audio recording.", "VideoSecu High Sensitive Audio Pickup Device External Amplified Tiny SpyGot it to use with a Swann system for the one audio channel it has. It works very well so far.", "Surprisingly strong and clear audio when I mounted this in a antique metal outdoor incandescent light fixture reflector dome 125 feet from the Pyle PF200 60 watt amplifier. Mic power is from a 9 VDC wall wart. Cable is a combo of 100' of XLR cable and 25' of Belden 8723 2 pair twisted and shielded 22 ga signal cable with RCA connectors at each end of the run. The two pairs are combined to make 2 conductors. In building the cable I maintained the twists, soldered the splices, taped each conductor separately, covered each splice with heavy duty aluminum foil to maintain 100% coverage and finished with Scotch 33 Electrical tape.", "It did not work at all. I am very disappointed because I expected it to enhance my surveillance capabilities on my cameras. Although I have not returned it I would advise you consider all options when it comes to this device. The price should have told me it was a fluke."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,945
|
You can set range from base station. My mother can wander free in garden and fenced in yard without problems. We don't rely on the unit alone and make sure she is accompanied by some one or in fenced/gated area.
|
{"question": "Can I set up an invisible perimeter outside with this unit so my mother can still work in the garden but not wander off?", "document": ["I pressed the panic button, only to receive an SOS text message with the last place the device had been able to pick up a signal - my house, 30 minutes away from my current location. Trying to track via the web portal using my phone was frustrating since the website isn't very mobile friendly. Since I was testing and wearing the watch myself, this was no big deal. If I had received this text and my mother had been wearing the watch, it would have been very confusing and distressing.After a taking a day off from work - when I planned to visit my mom and get the device set up for her - returning the item, collecting and testing it, calling customer service several times, driving again to set the item up, and having the product on only two days (before my sister pried it off with a fork), I paid the early termination fee and gave up.The only thing more stressful than being a caregiver is trying to rely on products that don't work.", "I was looking for something for my husband who has Lewy Body Dementia. He has not wandered, but I have read that 60% of people with dementia do wander. I love the fact that the watch can be locked onto his wrist so that he can't remove it. There is a special tool that you need to use that comes with the watch. I like the fact that if the alarm goes off showing that he has gone beyond the boundaries set, an email will be sent to you, alerting you. You then go to the website and enter your user name and password and will be able to see where your loved one is located.", "First of all I have to say that I purchased the unit that I have for my mother from the Lok8u company. The cost was $150 from them and took 2 weeks to ship. Usually Amazon is much faster and I see the cost is cheaper. There are some glitches I think with the way the unit operates..It is not perfect and you do need to familiarize yourself throughly with how the unit operates. I found that printinging out the operating manual was helpful and doing some testing of the unit was also helpful.", "When I say glitches.. I mean that it does false alarm from time to time, but if you have someone who wanders someone should be in the same building with them at all times anyways. You should not rely solely on this device to keep track of someone. Also I have noticed that sometimes when the base unit alarms it may take up to 10 minutes for the text alert to come through to the phone. We've had the device since Sept 2013 and there have been only two times my mother wandered and I was able to track her sucessfully..", "If this is you, the product might work. I would caution you to allow time to set the device up; after a few calls to customer service (who are extremely helpful), I had to return the product to have the handset replaced.If you are a caregiver who does not live with your loved one, then your situation is similar to mine, and you might be out of luck with this product. I bought this product for my mom, who lives several hours away. My mom is in her 80s and likes to take walks.", "I will make an update to this post once I get the device working. ***Update****I wish I could give this watch zero stars for poor craftsmanship! After getting a replacement base in the mail (two prongs were depressed to a point where it would not charge my watch), the watch itself still did not work even after the base now said it was charged. Nothing appeared on the display. After sending in my watch for diagnosis, I am now told I have to pay more money to have it replaced on top of my original purchase price (see email below).", "Since she has some memory loss issues, we were looking for a simple device that would alert us to when she left the house and let us know where she was. This seemed like the perfect solution. The problem? It didn't work.Despite the T-mobile map showing that coverage was good to excellent, the product had a difficult time finding a signal (it took over an hour). Even when the device found a signal, any kind of actual location tracking that I tried to do by using the portal was inaccurate (I stood outside for a while, inside, by windows - I tried everything).", "Takes 2 hours to charge. I do not have a smart phone and thought about getting one but when I tried someone elses Iphone and tried to logged on to the website it did not work.. I have a lot of disatisfaction about the Lock8u website. Last weekend I tried to logged on and change the desiginated person to alert because I was not going to be home but another member of the family was. The site did not recognize my sign in password and I was unable to sign on at all. There is no one to answer a technical problem outside of their Monday -Friday buisness hours 8-5 pm eastern time.", "It took 15 min or so to locate her. Previous to having the device she wandered and was gone for 12 hours untill the local sheriff finally located her. So for this reason even if the unit is not flawless, it does work. One nice thing is you can text the watch for a location, this works very well. The battery needs to be charged once a week if you don't have a bunch of wandering icidents..more often if you do. Every time they are out of range this will drain the battery.", "I bought this FREEDOM watch in January 2014 for my 91yr old Dad who has Dementia. He is starting to ‘wander’ and this watch has saved him a few times. Case in point- Yesterday he got away from my 83yr Mom and started walking down the street. She got in her car to follow him and parked a few cars in front of him to wait for him to walk by. He never did. There was a bus stop that my Dad past. Just by chance, a bus was there and he got on it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,946
|
The unit came with 2 types of warranty service from Dell. A local support and return material support. When you log a support issue for hardware, the tech. will make the call on how issues is handled. How do I know this. The laptop we purchased for my son started to fail within the first month. We used the Dell on-line tech support to resolve the issue and they sent someone to met him to get the issue resolved within 2 days. In short, the support seems to be good and the issue was resolved sooner than I expected.
|
{"question": "does this model have a complete care service from Dell or what type or guarantee?", "document": ["I never write reviews but thought I should worn people about this model. There is a flaw with the design, the WiFi does not work unless you are very close to your router. Near the router I would get 20mbps in the next room I would get .2mbps. My old laptop would get 15mbps in that's same spot!!! I had Dell come to the house and replace my screen (antenna is in the screen) and 2 wireless cards. Also I had Amazon send me a new one but same problems.", "Hope they can fix it soon. And after win8.1 one of the driver became missing on the device management's list, although the driver itself is working fine... far as I know.6. Customer service, every time you call with an 'real' issue they will charge you to help... a lot...Well I guess all the above are not essential to most, I'm just being picky here because I've got a great expectation of this laptop and that's why I can't help to write a review about it.", "(What am I, and idiot? Of course I am. But that's not going to help the fact the screen doesn't like to actually work or that the thing wasn't actually ever programmed to shut down) and the one woman who actually took the computer and somehow managed to disable the entire operating system requiring a complete re-install. That was a fun loss of files.Just...save yourself the heartache. Get an Apple. Or a Lenovo. Or and HP. Hell, get yourself one of those massive 1980's laptops that had a corded keyboard.", "I just love Dell XPS15. Magnificent, awesome performance, indisputable, redesigned multimedia, more powerful and more lightweight.Solid build quality.Stunning display. Amazingly well built laptop.", "And after already being disappointed by Dell's attempt to enter the mobile device world with the Dell Streak 5, my confidence level suffered again after buying their supposedly top-of-the-line laptop, the Dell XPS 15.", "Google xps 15 wifi problems and yoy will see what i am talking about. Dell asked me to send them the computer for repair but I feel if I buy a new computer I should not have a referbished one. I am sending the 2nd one back and ordered a Levovo Y510p. I hope this helped people.However if you are going to use ethernet only and not the wireless card you would be OK..", "No indication lights. Well I guess because of this computer is really fast and powerful they don't need to show when the hard drive is busy or not or if the dvd rom is running. I'd like to see some signals. only the one in the front that tells me if it's asleep/charging/powered on/off...5. Dell driver issues. The intel graphics driver is not working well on this laptop, have to use dell's (HD4000), even with that still have blurry text problems.", "After 10 years of being an Amazonia, this is my first review.Overall this laptop is good. I know you can probably think of the performance just by looking at the specs(It's really good uh), I will not go deeper into that, and I will just talk about a few things which I don't like about this laptop and related.1. The track pad. It's large good to use but the positioning is not so well. I don't understand why dell doesn't want to place it in the middle/center of the keyboard/space bar.", "Well, it took awhile for it to get to the five stars that it is right now. When I first got it, it already had problems. The back-light of the screen only turned on in certain places. Dell came to my house to fix it, and that problem was solved, but then something else went wrong and they were going to have to replace the sound board, the hard drive, and the motherboard, so I said "to heck with it" and said I would like to have my entire computer replaced, which they did for free.But now, on my second XPS 15, I couldn't have asked for better.", "I know it's bad for the computer, but I just leave the thing on now. It's either that or force a shut down that's equally bad for the computer.3. I get at least one 'program not responding' per day now. And I'm not taking about WoW, which I play. I'm talking about Word. Google Chrome. Thunderbird. And when you can't shut down your computer because it can't remember how, that's more trouble than it's worth.And Dell Tech Support is just as bad. The only responses I've ever gotten are \"are you deleting your temp files on a regular basis?\""]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 188,971
|
Rivets on inside of larger pots (24+) apparently the rivets are only holding the PLATE that the handles are welded onto, so the actual handles are NOT riveted to the pot, only plate is riveted, and handles are welded onto plate.
|
{"question": "Does this pot have any exposed rivets or screw heads (where two handles are attached) on the INSIDE of the pot?", "document": ["This stock pot is very will constructed, and is the kind of product you can expect to last a lifetime. Unlike some reviewers, I found the handles to be very well attached. I have the 32qt version, and the handles are fastened using a SS reinforcement plate, 4 rivets, and 10 spot welds. They are not coming off.Finish is perfect and the lid fits on snugly. The walls and bottom are very thick and it has more weight than you would expect when you pick it up empty. If I were to drop it, I would be more worried about breaking a tile than denting it, it's that thick.", "Pros:There's a 1/2\" lip around the top edge of the pot, making it very rigid.The pot & lid weigh in at over 14.5#The lid is convex/domed for strength & rigidity.Handles are sturdily attached with spot welds AND stainless rivets.The thick stainless clad aluminum disc bottom is hefty.Cons:The brushed finish is rather coarse both inside and out, making cleaning a little more work.Made in Communist China where there are over 1100 documented forced labor camps in which are made products for sale in foreign markets, such as the U.S.", "I agree that they're spot welded rather than riveted, but IMHO, it's just fine. There are actually two big advantages to this method. First, it leaves the inside surface of the pot completely smooth, with no protruding rivets where the handles attach. It makes clean-up that much easier as food and debris can't get trapped around the rivets. The second is that the handles are cool to the touch, even when the pot is hot. This was true of both the lid and the pot, and I found that I could lift the pot from the stove to the counter without mitts.", "There is no exposed aluminum and provides even heat distribution. * stainless steel lid - handle on lid is welded, not riveted, but there is no need for rivets unless you are planning to use the lid as a shield as my children wished to do. * riveted handles - they were both spot welded and riveted, four rivets for each handleThe product shipped double-boxed and upon opening, there were no dents or rust spots. The pot was covered in a grey dust (stainless steel from finishing??).", "The handles are securely attached and have nice big loops that are easy to grab even with mitts. This is a great pot for a great price. You will not find anything that comes close to this quality for this price. If you're considering it...buy it, and you'll be glad that you did.", "This is a very sturdy pot. Thick walls and a nice solid extra-thick bottom. The handles these were very solid - with rivets and a supporting brace as well. Works great for canning and brewing.", "We bought this pot to brew beer since we didn't want to use an aluminum pot + this one was big enough to give us the extra room needed to allow the brew to remain at a low boil. It is heavy (as you would expect). But it is sturdy and heats well and evenly. The handles seem quite strong and are attached with screws through the pot - not just welds. All in all it was just what we needed. I'll probably use it for canning too.", "I've purchased both the 60 (first) and 20 quart pots from Amazon and am quite happy with them. I've uploaded pictures of the handles and welds as at the time I ordered this information was not available. You can see that the handles are not bonded to the pot directly but are fastened with a plate that with is then welded to the pot. The 60 quart plate also features rivets. In either case the handles have no play and feel very secure.The 60 quart pot ships in it's own retail box.", "This 24 quart pot is better quality than I expected. Mine came virtually flawless and had no roughness. I can confirm the 24 quart version has both four rivets in addition to spot welds on each side handle, while the lid handle has four spot welds. The handles seem very sturdy and of good quality. I'm not concerned about them breaking on me. The bottom is extremely thick and the sides are relatively thick, thicker towards the bottom and tapering off towards the top. The lid is of good quality stainless and convex shaped and fits well.", "I use this kettle for brewing beer. It is excellent quality, heavy walled with an insulated bottom so you don't burn the grains. I have used it several times so far with great results. The only minor complaint is that the handles are riveted in. This allows for small contaminants to build up behind the rivets if it is not sanitized very thoroughly. I would highly recommend this kettle otherwise."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 188,984
|
1/2 inch. Very nice board. Like that it catches the juices in the tray.
|
{"question": "How thick is this board", "document": ["This cutting board is wonderful! Very nice and thick, and easy to clean! I toss this in my dishwasher after a good week of use. Right as rain.", "This board is pretty nice quality, basically as advertised. The only tiny complaint I could make is that it's pretty thick and heavy for no apparent reason, except maybe it'll slide around a bit less that way.", "I bought one for the house. it's a good size and fits in the dish washer easy. Not too thick as well. SW", "Great Price. Nice size. Not too large so it fits in cabinet, not to small where you have pleny of room to chop. Thick and not flimsy. Feels like good quality.", "These boards are thick and heavy. I use them for big jobs, but they aren't as light as others I've used, and don't fit into the dishwasher as easily as thinner ones. But their quality is very good.", "They are flat, which is somehow difficult for other manufacturers to replicate. They are thick and heavy enough so that they don't bend and feel sturdy. They're cheap, too, so I have several of each size and replace them when they get stained or gouged.", "The features I needed -Perfect size. Also fits in dishwasher easilyJuice grooveTwo sidedSolid and thick single piece construction.dishwasher safeOnly issue is that it can slide a little on the counter. I use a dish towel under it so no problem.", "Decent board protects counters", "This board is not so big so that it's a pain to store, and it goes into my dishwasher for sanitizing.", "This is just what it is advertised to be, a great cutting board which will save your counter tops. Highly recommend."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 189,066
|
A standard Cherry MX switch does not have o-rings, theses are an additional part that can dampen the noise from the switch hitting the bottom of the casing. The color of the o-ring has nothing to do with the color of the switch: All o-ring colors will work on all switch colors.
|
{"question": "I already have a Cherry MX red mechanical keyboard. Do these add on in addition to the red switches? or are they replacements?", "document": ["This is a good addition to my CM Limited Edition Storm with MX Cherry Greens. However, I think if the seller drops the price down to around $10 they would sell a lot more of these. After trying out the Red 40A-L's I'm kind of wishing I would have got the black ones... but none the less, I'm pretty happy with the purchase and I would purchase again. Again, it's a great addition to add to a MX Cherry keyboard to quiet down the keys when they bottom out.They are easy to put on... it doesn't take long at all with a key puller like the one that comes with the Coolmaster Keyboards.", "I just bought my first mechanical keyboard, a Das Keyboard for Mac, which is only available with the Cherry MX Blue switches. I knew the blues were pretty loud, and planned to add some o-rings. These 0.2mm ones seemed like a good first step. So far, I like them and don't feel any need to try the 0.4mm ones. They stop the loud bottoming out sound, while not affecting the action back up too much. I'm not a gamer though; I just wanted a nice, fast keyboard for text.I can also report that after watching a YouTube video on removing the larger keys, I took the risk of damage and went for it.", "The reduced "clacking" is nice, but if you buy a mechanical keyboard you probably don't care about the sound. The cushion/springiness feels really nice as well, but I'm not sure about how much it actually helps to make the keyboard better.If you own a Corsair K70 or a mechanical keyboard that has Cherry-MX Red switches I would definitely recommend picking these up.", "I bought a Storm Trigger with Cherry MX-Red switches, and wanted to dampen the sound because, you know, having a wife.The shipping was quick, the installation was simple, they give you plenty of dampeners to have spares on top of all the keys on your board.And now, this keyboard is only slightly louder than your standard rubber-dome board, and being as it's mechanical, that is truly saying something.Highly recommend this product to anyone that wants a little more control over the action and sound of their board.", "I have a CoolerMaster Quickfire with Cherry MX Blue switches (the really loud ones). My keyboard used to drive my coworkers insane so I used it only at home. Then my typing drove my girlfriend crazy... I love using mechanical keyboards and the noises that come with it. I started looking for a new keyboard with MX Red switches because they were not as loud, but I stumbled across these dampeners. The $60-$80 difference in getting a new keyboard vs picking up a pack of dampeners led me to try them out and they really have made all the difference.", "I purchased these for my Corsair K70 Mechanical Keyboard. The K70 comes with Cherry-MX Red Switches. If you do a search for Cherry-MX Red switches and follow the TomsHardware link you'll find specific information regarding these switches, including a small part about how these particular switches have a high rate of typographical errors.This is a gaming keyboard, but you will find yourself typing on it a lot. I can concur that I had a high error rate when typing on this keyboard. The keys have a 45g operating force and a 2mm travel distance before the switch is triggered, which basically means you don't have to press the key all the way down to activate the switch.", "I used these with a keyboard that used Cherry MX Red switches that I mostly game on. They are easy to install and provide significant noise reduction, considering how often you will bottom out while gaming. The shortened key travel is helpful as well.I have used them for ~3mos now and have not noticed any deterioration.", "I haven't had the pleasure of trying the other sizes of o-rings, but I think I'll stick with these. I have these affixed to my Cherry MX Red switches on the Corsair K60 keyboard. I do notice a slight bit more cushion when bottoming out on the keys, but other than that these really don't change the keyboard feel too much. The keys still feel firm and pleasurable to type on. The bands also feel pretty durable, and they've lasted pretty well for the month I've owned them. I hope they will continue to do so for the life of this keyboard.", "I have used the Red O-Rings before on my WASD keyboard with Brown switches and decided to try the blue ones on my new Ergodox with Clear cherry switches. The reds do their job well if you are using a heavy switch/light typer.If you are a very light touch typer or have a heavy switch (like the clear/black cherry switches) then you will probably be just fine with the Red O-rings. If you type at very high speeds/heavy typer or have a light switch (like the browns or blues) then you might want to consider using the Blue Rings.There are plenty inside of these packages to cover a full keyboard and have some left over as spares.", "Bought for a Corsair K70 with Cherry Reds. These already don't have the "click" part typical of mechanical keyboard noise, but they definitely have the "clack" of the keys bottoming out. I bought these O-rings to reduce the clack - I'd say it was marginally successful. It almost seems like the outer diameter (OD) is too small. When looking at the size of the O-rings vs the size of the "hole" that the actual mechanism moves up and down in it almost appears as if the O-ring will just get "gobbled up" in there and provide almost no barrier or reduction to travel at all."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 189,069
|
It comes with a 4 inch diameter hose that connects to the back on the unit and out the window. The hose has an adapter that you place in the bottom of of the window sill. You close the window down to the adapter. Your window is only open approx 4 to 5 inches. This exhausts the warm air and humidity to the outside. It is very simple to install and requires no tools. I had my unit up and running in less than ten minutes. I am very satisfied. Also unless you are really looking for it it is not noticeable from the outside.
|
{"question": "How does this hook up? does it need window hoses?", "document": ["200sq. ft bedroom nicely. I like the fact that it has a self evaporator in it so I don't have to empty water, but I live in a dry climate so not sure how it would do elsewhere. You must open the vent manually, my previous one opened automatically when turned on, but this is no big deal, I just leave it open. It comes with a kit to vent out the window, however my previous unit was vented out the wall using a dryer vent. It was easy to hook this up to it as well.", "Just the fact that there is no need to lift this air conditioner into a window has made this a great purchase. It's making the current high-80s days bearable. Good solid purchase.", "I bought this for a master bedroom and bath. It cools the area very nicely. It installed very easily. You will need foam tape to provide a seal around the window insert (not supplied).", "This was a heaven sent. We don't have the biggest bedroom but it cools it down nicely. It was super easy to set up, however, even though it has all the parts you need to connect it to the window there was no instructions as to how to do it. Luckily my husband made a plan and had it up and running in a short few minutes.", "Unit set up easily.cools small living and dining room.With two small bedrroom window units can cool entire first floor.This combinatiion is less expensive than Central Air if you only need it for July and August.", "I like the remote, the fact that it does not need to be drained, it has movable louvers, and does the job well. Only con is that it's a bit noisy. I have it in my very small office at work, which has a west-facing window and 5 computers, so can get toasty. It's only about 2 feet away, so I usually grab the remote and turn it off when I'm on the phone. But I think if it were in a larger room, it would be ok.", "I may need to get a small window unit for my kitchen once the summer heat is in full force but so far this unit seems to be working fine for my space. The volume is about that of a standard stand up/rotating fan and seems quieter than my upstairs unit. The built in dehumidifier has also made a very noticable difference in the air quality/comfort within my home. I would highly recommend this unit to family and friends.", "I'm going to love this thing this summer! The hose is only about 5' long so I did have to buy another flexible hose to run it to the stairs going to the attic (I also bought that A/C foil tape and just taped the hoses together...the hose gets really hot and I hope to insulate the hose soon so that heat isn't coming back into the garage).", "Even with the slight gaps there isn't any leakage of cool air that takes away from the cooling power.So, if you need a unit you can feel good about putting your money into this one. You can exchange it very easily with Amazon if you get a dud, and it comes with a 5-year limited warranty if something happens after the Amazon window. The casters make it easy to roll, but I had to sit it on top of a box to make the hose reach the window. With a little adjusting you can make it work great.", "I order this unit from Amazon using the Prime shipping option. I am always amazed when you order something this large that they are able to get it to you that fast. It arrived on time and was very easy to unpack, set up and get running. Unpacking directions are on the outside of the box so it is hard to miss. I took about 10 minutes to get it out of the box and have it running. One thing I forgot to order was some phone tape. You will need it to cover the gaps when you install the venting system in the window."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 189,082
|
No
|
{"question": "Do I have to have video software to use this camera? I don't need to edit or anything, I just want to be able to watch on my computer.", "document": ["The Vixia HF10 is a great camcorder for those interested in HD quality and in a computer friendly format. Image quality is superb for such a compact model.Cons, I would like to be able to adjust the white balance from a control outside the camcorder rather than with the touch screen. Additionally, the software that comes with the camcorder is poor from an editing standpoint. If you want to edit your film into better projects you will need to spend an extra [..] to get what you need.", "and the size of your favourite beverage is well acceptable even for ladies or kids hands.The HF11 does not come with any major usability hitches but for video editing features you might want to look into additional software editing and codec converter solutions like Divx, Xvid etc. to be able to share the joy with your friends on DVD etc. The package contains all possible cables but NOT the ultra compact HDMI cable connection.The major salespoints of this video camera are- Imaging quality (resolution and smoothness of video)- Canons colours- Usability- Usability and- UsabilityMy subjective opinion is that the Imaging quality is unlike anything I have seen before and easily justifies the product alone.HF11, HF10 or HF100, which one should I get ?If you cant compromise video quality for anything get the HF11 with its 24mbps recording mode and be rest assured you have the extra stretch when you need it f.e.", "Video editing sofware: since this camera shoots in AVCHD, pay attention on the software you'll have to buy in order to edit your films. The one that comes with the camera is just ok. For Mac users it's a no brainer, but for PC user, like me, be aware that Adobe Premier does not edit AVCHD files. You'll have to chose either Sony Vegas Platinum or Pinnacle to do so. An upgrade in your computer may be also needed, especially for Pinnacle.Bottom line? Buy it! But also order an extra battery and SD card to guarantee you don't miss anything!", "You need a fast processor and lots of RAM to efficiently edit HD video. Especially AVCHD. I've done it on my dual core, 4gb ram, no-dedicated-video-card laptop (HP Pavilion dv5-2135dx), but it is SLOW. Once you get more than a few clips on there, especially layered, it's basically not even worth trying.Overall, I'm very happy with my purchase. If you only want to spend $300 or $400 bucks, I don't know of anything that would be a better deal.", "Every Mac user ought to get Roxio Toast anyways, since it is extremely useful for all kinds of video and data management.Anyhow, I think it is worth knowing (I didn't know, but soon found out) that when you buy an AVCHD camcorder that the size and convenience of the camcorder come at the cost of compressed video files that will need to be uncompressed before they can be edited. I think it's a small price to pay and love this camcorder, but if you bought this and didn't have an Intel Mac and weren't willing or able to get the right software you'd have some very limited options for doing anything with your video.", "This is a complete amateur review - I bought this camera used, but in pretty much brand new condition. It is an incredible camera! It takes amazing video. The sound on it is good/very good, not amazing, but maybe you would need to looking to the mic to boot on for that. It's as small as a coke can, has amazing capabilities, but my problem is that I didn't realize that my computer is not strong enough to handle this thing. I have an average laptop. So, for those of you that want an amazing HD camera, this is it for your, but make sure that you're comp is equip, or be ready to fork up the money to upgrade your comp to be able handle this machine (I'm guessing that I didn't look at the minimum comp requirements).", "If you watch the video linked at the bottom of this review, there is another on my account entitled \"Strange Morning\" - the lines are very evident here. I am not an expert on video rendering, and I have no idea what causes this, but my guess would be the AVCHD format. When I convert the files and edit in Premiere, the end result looks great.Also, to transfer files from the Camera's internal HD to a computer, the camera must be plugged in to an outlet (charging).", "If you want to get into HD video in a big way for a reasonable cost the HF-10 is the way to go. I love it. Being able to pop out the SCHD card and get video right into the computer is great. It is small light weight but really delivers a great full screen HD picture. I got the WIDE ANGLED lens (sold separately) and the bigger battery (sold separately) to complete my package, but for kid vid and amateur shooting, you really don't need to buy the extras.", "This camera is reasonably easy to operate and makes great video but do not buy this camera unless you are really computer and software savvy. The \"pixela\" software that comes with the camera is horrible! It is far from intuitive to figure out how to use it and the directions suck. I haven't been able to figure out any other product that works for getting the video clips onto my computer. I'm so frustrated with this thing that it is now mostly a very expensive paperweight.", "I wanted a General Porous HD Camcorder to shoot Vacations, Exhibits, Family Video and for my own video production team that doesn't break my budget.In My Review, I'll explain the Pros, Cons and how to over come the cons + other Camcorder tips (AVCHD Vs. HDV, Sony Vs. Canon).== Intro ==- Basically It's a High Definition camera using AVCHD codec which it consists of: Video encoded with MP4/AVC H.264 and Audio encoded with Dolby digital.- It uses on board Flash (16GB) to store footage.- It has lots of options and manual through it's menu which is accessed with the joystick located on the left of the screen.- It uses CMOS sensor to capture video.== Pros ==- Capable of Full HD 1080x1920 recording.- Capable of Recording with different Frame rates : 60i , 30p , 24p- Image is clear and crisp (Best In Class).- Very good low light performance.- Very good image stabilizer (Optic).- Importing Video footage From Camcorder Into PC is very easy and fast (Because it's tapeless) Via USB.- Can Use SDHC to increase recording time.- Light weighted and small sized : easy to hold up for long periods (considering other HD camcorders)- Has a verity of ports, can use professional accessories (including lenses, microphones, tripods, video light, etc..) with it (directly or indirectly with converters).-Sound encoded with Dolby Digital Codec.==Cons==-Compression artifacts sometimes are visible when you pause the video footage (due to highly compressed video).-AVCHD codec is very heavy on the computer especially If you are planning to edit the footage.-No Slow Mo capturing.-Battery life could be better (80-90 Minutes)-Although the camcorder does capture at 30p and 24p, but it is encoded within the time frame of 60i (which is good for viewing directly on TV, a living hell if try to edit with out converting to true 30p/24p) don't get me wrong, the camera does record actual 30p/24p but to edit it you need to convert the video files first , especially with 24p (requires converter capable of inverse telecine).-Audio is only 2-channel (stereo).-Microphone is medicore .-Manual controls could be better (but I suppose that's why there is the HF S10 model)==Special Notes==- Best AVCHD consumer camcorder is HF S10, Period.- The HF11 is a better option than HF10, why ?"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 189,093
|
This vacuum does not have vibration mechanism for the so-called deep cleaning. It is primarily designed for the hard floors, such as ceramic tile, wood hardwood floor, or linoleum. (It will not damage the surfaces, even wood floor) The suction is so strong, it sucks up all the dog hairs on the carpet (my regular vacuums does not do a good job on sucking up hairs.) Although it is designed for the hard floors, I also use it for the carpet - it does a fantastic job. I also use it for cleaning the window curtains - it works unbelievably effective (you need a brush attachment came with the unit or purchase from Amazon). It cleans carpet better than my Royal or Kirby machine. The sucking heads is designed in such a way, it can access to every corner of the house. It is very light, weighs only about 7 pounds. After I bought this unit, my house dust level suddenly drops to near zero! I consider this vacuum is one of the most worthwhile purchase in my 70 years of life. You will not regret if you own one! Oh, by the way it has a telescopic extender for the tall persons and changing the dust bag is extremely easy. Believe me this appliance will change your life, may even extends your life expectancy! Good luck.
|
{"question": "how does it vaccum carpets?", "document": ["Just wish I had purchased one that had a more powerful rug cleaner. Have ordered a powered rug cleaner for an additional $100 so hope that will make me happy. Had more expensive Miele Vaccum and loved it for over 5 years. I know this one will do all I need with the powered tool for carpets!", "What a great vaccum. Only thing I find difficult is storing it because hte hose doesnt attach anywhere", "This is the only Vaccum you'll ever need. Light weight and moves easily from hardwoods to carpet to throw rugs and even drapes. This Vaccum is a dream!", "Great vaccum, I love the limited sound (I can still hear my kids ) and the suction is finally up the snuff (hoover before and it sucked)", "This vaccum is treamendous. Works wonderfully. Does a great job on hardwood and is light, manueverable and easy to manage. Oh, yes, it also really "sucks"! ... in a great way.", "Great vaccum. Wow does this thing pickup the dirt. Our house is all hardwood and tile and we have 3 indoor cats, brooms just push the dirt around. This vaccum is wonderful, I never sweep now just pull out the vaccum and clean up.", "Our house has quite a few stairs and this vaccum is really light and agile. It does a great job on the hardwood floors and is easy to navigate on stairs and under furniture. Only draw back is that I have to use an extension cord as the cable is very short.However, overall I prefer it over the Dyson, which was far more expensive and is difficult to handle - the Miele suction is as good.", "For about fifty bucks, it came with a carrying bag, floor wand and brush, and other typical attachments. It's great because I can vacuum several rooms at once with the cannister staying in the kitchen. Also, I can easily vaccum stairs...just drag the hose around instead of the whole vacuum. I found this baby at an online store that specializes in central vacuum cleaners. It's made me much happier about my Miele purchase.", "Vaccum is great.. standard Miele quality, but GoVacuum told me my old red star power head would fit , but doesn't .. then wouldn't respond to questions..Hose connects but electric is different plug.would have bought Delphi had I known old hose electrical connection is now different.. Older Miele REDSTAR hose electric connection WILL NOT fit newer Olympus Model plug. thanks.", "This is a great cannister vacuum. It is quiet, adjustable, lightweight and easy to maneuver. It has great suction that is also adjustable. The only thing I didn't like was the hardwood floor tool. It made a scratching noise when used and stuck to the floor. I would say that if you are going to use on hardwood floors, you need to find a tool that has a natural bristle brush for this vacuum. Other than that, it is the best cannister vaccum I have ever owned. The price was not that bad for the quality you receive."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 189,094
|
Insulation is primarily done by the outermost container. You can mix hot and cold in the smaller containers, but they are not well insulated from each-other.
|
{"question": "I put hot food in 1st & 2nd container and cold salad in top container My son said salad was a little warm? Is this only for all hot or all cold?", "document": ["I purchased the Zojirushi Classic Bento Vacuum Lunch Jar so that I could pack a hot lunch for my son that just started 5th grade. He's not too fond of the school lunches and the paper bag lunches are always room temperature by the time he has lunch in school. He LOVES the Bento. I pack a hot soup in the soup bowl, a hot meal in the hot container with the insulated lid and usually cold cut up fruits or yogurt in the top cold container. He said that the hot food stays HOT and the cold remains cold by the time he has lunch 5 hours later.", "(it is not designed to) A salad or veggie sticks in the top container will not stay cold, it'll be lukewarm. (no big deal)If you pre-heat the vacuum jar with hot tap water and heat your food until it is too hot to eat - it will still be steaming hot after three to four hours when kept in the insulating bag.I gave it four out five stars because I feel the sealed soup container should be larger. (enough to hold an entire can of soup)Otherwise, it is great and even though the price of admission is a little steep, it has saved me a lot of money and I'm eating better too!", "I'm so happy to have warm lunch meal without using Microwave during busy lunch time.It comes with three layers, soup bowl (bottom, sauce of pasta), main bowl (middle, pasta), side bowl (top, salad).All three containers are able to use microwave to warm up and soup bowl & main bowl are able to keep warm, and we can still put salad in side bowl (top). Amazing! But I feel side bowl (top container) gets warm up slightly by the heat of main bowl, so I'd prefer not to mixed up warm & cold meal in one lunch box.I normally heat up soup on kitchen stove and put only liquid in soup bowl and stuff in main bowl, because if you put whole soup in main bowl which is the biggest container among three, it will leak.", "I am disappointed with this product for 2 main reason, which are the main reason for purchasing it... first, it doesn't keep the food hot/warm enough. It won't make you food go cold but it doesn't maintain your food near it original temperature when you prepared it. And 2nd, the middle container is only designed to hold dry foods like like. I tried to put in some soup or food with sauce, and it leaked and spilled all over. The only container that you can put in soup or any food that has sauce is the bottom one which is very small.", "When my husbands gets home he always tell me that how his friends were interested in his lunch and wanted to taste some. This item is good to keep food warm about 5hours and after 5hours you might have to use microwave. ( but food is not cold just needs to be heated little) containers are easy to wash and dry fast with towel. I like the bag came with it. There is small room on the top so you can put your snack on it. I put apple or little bag of nuts.", "You can put soup in the center container, but it leaks a bit, although it still kept said soup very hot for several hours. Keeps cold things cold as well, although I have not tried to keep a hot container together with a cold one all morning.Still quite a bit to wash, but very handy and well designed.Recommended.", "My 5 year old son recently started going to a child care facility that does not provide lunches and also does not heat up food. We struggled with looking for a thermos in our nearby stores, and thankfully we were able to find the Zojirushi Classic Bento on Amazon. It works perfectly in keeping his food warm.We heat up his food (pizza hut personal pan, rice, chicken, soup) in the morning before school, and it's definately still warm during lunch. Some days, not all 3 containers are packed with food, so then my wife will put hot water in the bottom container.", "I purchased the Zojirushi SL-XB20HG Classic Stainless-Steel Lunch Jar along with the Zojirushi Classic Bento Vacuum Lunch Jar and I am satisfied with both. As with other Zojirushi products expect top level Japanese quality. The parts are very well made and appear to be made to last a while. The jar keeps food warm from early morning until lunch very well, especially if you heat the inside of the jar with hot water before you put the containers in. It is good to note the top container is to be used for room temp foods as it is not insulated.", "My son just started using this Classic Bento this past month, but we've already tested it with a hot meal (Stir Fry with an eggroll) and a cold meal (sushi with pickled cucumbers). He's looking forward to using it in the fall for his senior year of high school when he'll be able to take leftovers rather than purchase marginal food at the cafeteria or rely on a multitude of pb&j and ham sandwiches which can become boring week to week. He loves that the bag is easy to carry and allows an apple or other portable fruit to be carried in the top and the fact that it comes with those fabulous chopsticks, I love that it is totally reusable (less sandwich bags) and that it is saving our family money and providing my son with healthy vegetarian food at lunch.", "That's really my only complaint.Not having to use the microwave to have warm food is a great convenience for those that are on the go or maybe work in construction. Also, you can have a large variety of meals instead of always having a form of soup from a thermos. For example, rice in the soup container, roasted veggies topped with some grilled chicken in the middle container, a salad in the top container. That's a balanced meal."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 189,096
|
We did not find the antenna to be satisfactory. It was mounted on the roof of the house and didn't seem to do much of anything. Since we weren't sure if it was working properly, my husband called to seek help. Never got a response.
|
{"question": "Will this antenna work in an attic?", "document": ["i got this antenna because i could not pick up channel 10 with the one that i had.i can now pick it up,however the remote control does not work!", "antenna work great better then i thought it would , the only draw back is the remote control rotater does work most of the time. however it a lesson learn i going buy another antenna but it will be unidirectional.", "With all things you always wonder will it be good will it work. This antenna works great for me. It is easy to put together mount and setup. I live way out in the country and it really picks up channels very well.", "If you get something wrong, you should not pay for return back. This antenna does not work "only local channels", do not believe all the stars, advertising, .. , I hope my time and lost money helps someone .Good luck", "It works ok but you have to rotate it for every channel you want and it hard to get it back in the right place and with my tv it scans for channels and if its not on that list it will not work so it did not work for me sent it back Amazon refunded my money with no problems recommend Amazon great place to buy but this Antenna is a no! !", "Performed best with amp on, did not try with 2 TVs. Actually the Mohu leaf antenna was able to receive one more station than this antenna did. Since the Leaf is less obnoxious, smaller, and did not require electrical connection, I stuck with the Leaf. I assume power is needed for the amp to work since instructions received did not explain.", "I bought this antenna against the advice of a local "expert" to put up at our cabin in the mountains. He told me it wouldn't work. He was wrong, it works great! We get an excellent picture from stations that are roughly 50 miles away. That allows us to get news, weather and even football at deer camp!! I would buy this again. The only downside is that the coax cables supplied with the unit are pretty poor, one actually had a break in it.", "The rotation motor or control box does not work,new out of box. The instructions actually say to check this function prior to install. This tells me that they know there are good odds of defective units. How about you address this instead of instructing to check it before install.", "I bought this antenna for an attic installation. My research over the past month had led me to believe that I needed an antenna that would cover double the range using an amplifier. The towers surrounding our house range from 12-45 miles away at 160-280 degrees (magnetic). According to sites like TVfool.com, we were expected to get 12 channels with reasonable certainty. I was only concerned with picking up the local PBS, ABC, NBC, and FOX channels out of Montgomery. I figured I couldn't go wrong for an antenna, amplifier, and 75 ft of coax for $32.", "its nice antenna just not very satisfied was missing a part to tied to the pole from the bottom of the antenna! !"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,097
|
Jason, long hair does get stuck, believe you me, I have long hair and I have to clean this sucker every week after it vacuums twice, if I don't it will really be hard to clean out the hair because it gets on every moving part all balled up,but as long as you clean it often you will be okay, I know it is nasty and no fun, but that is what you have to do in order for your job to be more easy
|
{"question": "Does long hair get stuck on these like with the 5 pronged brush?", "document": ["First let's get this out of the way. I LOVE my Roomba 540 like there's no tomorrow. That little robot is so cute and does a great job. But the previous poster was right - the side brush doesn't last long, especially if you've got a lot of clutter that the Roomba has to maneuver around, or rugs with fringes that sometimes get caught (I have both). However, why on earth would you pay $[...] on something that is available on the Roomba website for $[...]?", "I bought this pack to replace the original brushes I had worn out on my Roomba 560. This brush series seemed to fold over on itself very often while cleaning to the point where it was jamming and causing errors. I found with the 5-pronged brush this did not happen (or at least didn't happen to me). I ended up going back to my worn 5-pronged brush while looking for an alternate.", "Anyone remembers Orwell's Animal Farm? :)))Like all good things in life, the helicopter Roomba brushes only last for so long. A time comes when they need to be replaced. In our case, there was in fact a transition period where our 5-arm helicopter became a 4-arm, then a 3-arm so we got the replacements. They were 3-arm brushes :). In all fairness, I can't say if they perform better or worse than the original, I'm just happy that our Roombas (got 2) are complete again in the way their maker wishes them to be.From a prospective buyer's point of view, it's probably important to testify that the replacements do work.", "Packed in padded envelope, arrived as predicted. No frills - no official Roomba-certification and does not come with screws. (Save your original!) Installed easily on a Roomba 650.These brush arms seem longer than the original ones and may be brushing up against part of the wheel when in use. But hair/tangles will likely get to them first, so glad these brush arms are replaceable, come in 3-packs and are relatively cheap.", "I think the new three brush system is working for my system better than the 5-brush system. It appears to be more durable. I have not had it very long but time will tell to see how long it lasts, or holds up. It appears that the manufacturer did their homework and redisigned the brushes just a little, hopefully to make them easier to install and to last longer.", "Great deal on these.Also works on a 400 series Roomba so long as you keep the original screw. Better than the original 2 brush version.Great service. 10 days to get to New Zealand.Would definitely use these guys again.", "These work fine and they have held up well. They are a little longer than the stock Roomba brushes, but they do not seem to get stuck under the machine at all.", "I bought this 3 pack for my roomba because the brushes get stuck on stuff from time to time and rip off. These are a simple swap (one screw) and quickly replace the broken/worn brushes.", "the side brushes get quite tangled with hair and pet fur, so having spares is a big help and keeps the unit working effectively.", "This 3-spoke brush replaced the factory 5-spoke brush on our 500 series Roomba. It took just a couple minutes to replace and works like new with a replacement filters. Everything else just needs to be cleaned ever couple of months."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 189,114
|
I had to measure them. Most of the single pockets are about 4.5 x 2.5 inches. The bottom 2 rows are 2 pockets twice as long as the others. Hope this helps.
|
{"question": "How big are the different pockets?", "document": ["I would highly recommend this item for the person who owns lots of jewelry. Its sturdy and offers pockets of different sizes. Its a big improvement over digging in a jewelry box untangling earrings and necklaces. Makes a great gift too!", "I love my jewelry holder, I just might buy another one! I like how it has different sized pockets on it.", "Exactly what I expected. Don't know why I waited so long to order this item. Different size pockets would be my only suggestion.", "well made with good sized pockets. it holds a lot of different items and makes a really neat display for my products for sale.", "It has plenty of pockets for all of my jewelry. It could look better or have different colors but it is a good bargain and economical. Overall I was very pleased with my purchase.", "I expected something different. I did not expect the pockets to bee this size. They are too small. The larger pockets are not well designed and there is a danger of whatever is in there to fall out.", "Very nice organizer. Fits all of my jewerly in there, has different sized pockets for all sizes of your jewerly! Oh yeah , there are two sides, so you can hang it on your door and flip it over to put more jewerly on the other side too!", "This two sided pocket organizer is great. Holds jewelry great. Well made and hangs right on the closet door. Different sized pockets are good for storing larger items.", "This item has ended my jewelry clutter. It makes items visible and ready. I don't end up rummaging through jewelry. I wear different sets instead of the same ones. The pockets are a little small for some items, but it's workable", "If you have a lot of costume jewelry like i do you will love this.... such a space saver and easy to access! I bought 2 and it holds many different size jewelry and put it this way I still have pockets left!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 189,123
|
The opening is 3 3/4 in wide snd will hold a ceramic cup.Great idea,I just put in the cardboard ones.I Love my unit and looks professional next to my Keurig coffee maker ENJOY ...luckyguyswife
|
{"question": "would anyone happen to know if standard size ceramic cups/mugs would fit in place of the plastic/paper? or be willing to measure the exact openings?", "document": ["I do love this, and like the way that it is made, but my plastic lids get caught in it and don't pull up smoothly. I am using Dixie Perfect Touch cups and lids, which seem to be a pretty standard size. The napkin holder will hold your standard "cheap" napkins, so you don't have to by expensive beverage napkins, which is very nice. I would buy again, but I do wish the lids came out easier...I'm not sure how this could be fixed.", "I had very high hopes for this in my home next to my coffee pot and, while it's OK and I'm keeping it, I have a few issues with it. The 16 oz. Chinet Comfort cups I love barely fit and the lids only fit sideways. But I like it so much I'm willing to try comparable cups once these run out. I wish it held more sweetener packets or had a place for a sugar canister. I don't really need the utensil and napkin part but I'm using it for the coffee scoop and hot chocolate packets.", "In a word: Wow. The coffee bar was a disaster before this contraption came along. Finally all the cups, stirrers, napkins, creamers and sugars have a designated place. Since this caddy has such a small footprint, it opens up counter space that was once wasted by sprawling supplies. It is made of good quality, tough plastic and is easy to keep clean.", "We like this product but we stock it differently than shown. The compartments are just a bit too small if you do it like the picture. But you can customize it easily to your needs by storing elements wherever you want. Our stirs on the back side compartment; napkins in front side; real coffee mugs in-place of where disposable cups/lids shown; & sugar is in the drawers.Not really a good place for creamer and the top area [where straws and sugar packets shown] is not being used.", "Very good for coffee station but would like drawers bigger for tea bags. Plastic looks sturdy.", "I purchased this for my work kitchen because I hated how we were using plastic bins to place all the sugar packs and cream. It blends in very nicely with the coffee machine and it has a decent storage capacity. Everyone at work is very impressed. Great price too.", "Finally something worthy of being on my counter next to my Keurig. I've tried so many different organizers, most are wire, or cheap plastic. This one is solid, made very well, matches my machine beautifully, and has a place for everything.I love it, highly recommend it, and rate it 5 stars.", "Love everything about this product but need to purchase smaller coffee cup (12 oz or smaller). 16 oz cups fits very snug and lids do not fit at all unless you turn side ways. However, I love it and do not have any complaints.", "This fit perfect on top of a microwave next to out Keurig coffee machine. Only problem is when the cups get low it's hard to reach over the stirrers so we just keep adding cups. The pull out drawers are small so they don't hold much. It does give a very clean and organized look to the coffee area.", "It is exactly what I needed to organize my coffee area in my kitchen. Very satisfied. I would definitely recomend this product to people. I like that I have a place to put my extra keurig coffee and packages of sugar."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,133
|
yes. ps FYI i had some problems with this record player, some records would skip and when i contacted the company they told me to TAPE A DIME to the arm of the player. i would maybe look into finding a player with a weight already attached
|
{"question": "Does a power cord come with the unit?", "document": ["I bought this for my boyfriend who is a older music junky. I love the suitcase design. The sound is GREAT. I honestly recommend this item to everyone. My one and only complaint is that there is no place to store the power cord. If it wasn't for that, it would have received five stars. Again, I highly recommend this product to anyone who wants a good up-to-date record player with great sound.", "I have found that the player produces a very nice sound on old and new vinyl. It also seems to be very durable and well built. I haven't had any problems with it. It is also very cute and goes with my room. Perhaps the thing I love most about it is that I can put in a 33 and still close the lid. The only thing that might be of slight annoyance is that there is no place to store the power cord if you were planning on traveling with it.", "Well I bought this just to see if I would even want to get into records... The answer is yes, yes I would. It's simple small sounding but it looks cool and easy to set up, power cord broke after a week of having it , have to Jerry rigg it to work that sucks. Umm other than that I liked untill it didn't work right. Gonna save up for a proper record player. If your looking for a novelty thing here it is, if your looking to play records none stop get a record player", "I've had my turntable for just about a month. So far I'm very pleased with the purchase.I love the look of the case and the fact that you can close the lid with a record on the turntable.If there was a stowage space for the power cord, making it completely portable, it would have a full 5 stars.Addition on 7/8/13: I'm quoting this from Jetrocket's review, because I think it is important:\"The tone arm is flimsy and is not designed to play new vinyls which tend to have wide grooves - tracking on to the vinyl is hard and it all becomes a skip-fest.", "I would say that this unit did nothing to contradict that impression. Nonetheless while my main system is away being repaired this has come in handy. I just wish good ol' american build quality was back in fashion...", "I'm very pleased with my purchase of this record player. I had originally bought another turntable that wasn't as good. With the Electrohome, the sound is as clear as it can be playing records, and the volume ranges from the sound coming only off the record itself to outrageously loud. A needle cover is included for protection between uses and there are removable stickers telling how to use it. The only drawback I see is that there is no place on the unit to store the cord. However, that is the least of my worries.", "I love this. I bought a Crosley before this and that thing didn't come to me in a very good shape. This one on the other hand was perfect.", "I love that I can close it up and store it away - it's a very portable item which makes it easier to use more frequently. The sound is surprisingly good and loud for such a small speaker. The one complaint I have is the cord length is very short.", "We inherited so many vinyls and wanted something portable to go in and out. This player sounds wonderful. Actually surprising the rich sound it puts out. It was so much fun listening to the Beatles, Elvis, etc. We will enjoy this for yrs to come, highly recommend.", "This item came really quickly. I really like how easy it is to set up, how it looks and how it's portable. You can also plug in your mp3 player of sorts and use the speaker power on this item to play your music. It has a good range of soft to really loud. It's very user friendly and super cute!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,135
|
I haven't tried it out on a long pull anywhere yet, but the handle does have a shorter position that feels like it will "lock" in place. My measurements are: 37 inches from floor to bottom of t-handle when fully extended and 27 inches from floor to bottom of t-handle in shorter locked position. I hope that helps your decision making.
|
{"question": "Does any the retractible handle have several height positions? I see below that fully extended is 20.5inches. What would the shortest extension be?", "document": ["I did see previous reviews that said that they didn't like the noise they made on the tile/wooden floors, or the handle was weak, but I didn't experience any of these problems whatsoever! I would definitely recommend this backpack to everyone, and I have indeed,", "It's a tight fit to get the velcro fasteners to engage when you stow the straps, so although it does work I think an inch more height and width would have made the flap easier to manage - and would probably reduce wear and tear in the long run.I would definitely recommend this product.", "I have a physical limitation and cannot carry heavy bags. I've gone through several computer bags before trying this backpack. I can't believe how lightweight it is. I can carry it up and down stairs with one arm without fear of falling. It easily rolls in between tight spaces such as airplane isles and the extending handle feels sturdy making it very easy to maneuver.", "I bought this because my old computer bag was falling apart. As a college student, I have to haul my computer and several heavy books all around. I liked the idea of being able to wheel it all around, so I finally picked this bag.On the positive side, the wheels and the handle work. I have no complaints. I've run it on pavement, unpaved paths, and through debris-littered sidewalks. It handles them all well. Occasionally a rock or something will jam, but that has only happened once or twice.", "Of course, I have a larger laptop which makes it more difficult. This is also a problem because the weight is actually on the front side of the bag. I think this makes it easier to roll and very nicely balanced (see below) but when you unzip the main compartment, it wants to fall open - dumping your laptop and papers out! (I actually had my laptop fall from table top to floor because of this! )The bag is also functional as a backpack but not very comfortable. It's not something I would want to carry around a lot.", "Like many large places, the place I work now in Chicago, has three workout rooms, and several small locker room areas for those who like to keepfit on the job, this is a perfect venue for bringing both your work, and your workout stuff everyday on the job.If you use it as a backpack there is another surprise, there is a drop down and velcro attach cover for the wheels so you don't dirty your shirt back or pants. Not to mention, a touch of a button and the pull-a-long handle retracts quickly for backpack conversion or access to the contents.", "The main compartment has plenty of room for a change of clothing with a tablet or small laptop with plenty of room to spare in the front compartment for toiletries and/or accessories. I definitely see myself taking this as a overnight bag if needed.I really like the outside pockets and the ability to stow away the arm straps.All it needs now is some type of portable power source built in and it would be perfect!The price is right also, for a rolling backpack from a name brand that is well made.", "This backpack is advertised and sold as a laptop bag, and as a laptop bag it is fantastic. Plenty of padding, plenty of room for cables, plugs, etc and plenty of room for other extras like pens or pencils. There is also two compartments/sleeves that would easily fit a tablet device or even a MacBook Air 11\" model with plenty of room to spare. There are small compartments, large compartments, you can definitely \"lose\" something in all the compartments (but that is not a bad thing).It is well made and the rolling capabilities definitely help when the bag is weighted down.With that said, I could see this as an overnight bag as well.", "It also stands by itself very nicely. The handle is sturdy and a good height for me (and I'm 6'4\" tall!) and it raises and lowers very nicely. This helps when switching from rolling to carrying on the fly too. The only thing I don't like about the rolling aspect of this bag is that the wheels are very hard so they are VERY noisy when used on a hard surface (like airport floors, sidewalks and indoor walkways). People certainly know you're coming! !Overall, not a bad bag for the price.", "I received the backpack on April 1, and I guess April Fools may be appropriate.Poor inner pocketing. The Main section is one big space and everything just falls to the bottom of the pile. The irritating fact is that in exactly 30 days the extendable handle locked up and can only be lowered by manually pressing the snapping "plugs" at the connection points on the bar to release. The button does not work. It can only be pulled out again by wriggling and pressing for quite some time, not useful in an airport.I see this investment as a dead loss and am looking for an alternative."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 189,139
|
You cannot fit your hand in the carafe. You need a wine bottle brush to clean it.
|
{"question": "Can I fit my hand in the carafe for cleaning?", "document": ["This should be ZERO stars but thats not an optionAfter much apprehension because of the mixed reviews I ordered the Technivorm Moccamaster---HUGE MISTAKEThe machine was dirtier than you can imagine upon arrival and after cleaning it by hand I attempted to use it and within 30 seconds all of the water leaked out of the reservoir all over my kitchen counter and floor. It then was clear to me that the item was so dirty since it was probably used and returned by another consumer unhappy that it was defective and the vendor just sent it back out and i was the unfortunate recipient.", "I've been religiously making coffee with cone filter/drip as instructed by blue bottle, ritual roasters, stumptown, and other mavens. Apparently, what I've been doing does not hold a candle to what the Technivorm can deliver. Technivorm's temperature control, from water dispensing to steeping to release into thermal carafe are far superior and easier than what I've tried to do by hand. The taste is apparent--the coffee is less sour and more sweet than my normal methods. As other people have probably mentioned, I would only say, when you put the carafe against the machine, make sure it releases that lever to let brew flow from the cone to the carafe.", "On the positive side, I love the ease of cleaning, the good looks and quality, and (in the case of the 8-cup older model), the coffee it makes. However, for the price of these machines, it should be 5 stars in all categories.", "So like many of you, I've had almost every coffee making devise on the plant. Traditional coffee makers, french press, Chemex, etc. I was also appalled at spending $300 on a coffee maker. This one does not grind the beans, have a timer or a clock on it, no lights or anything fancy. What it does do is make really, really good coffee. The beauty of this product is its' simplicity in design. All the major parts are removable for cleaning, it brews coffee in 6 min or less AND it looks cool on the counter-top.", "Although the instructions in the box indicate the coffee filter holder has a switch for the strength setting on the new model, mine does not. Technivorm must use one instruction sheet for a variety of models, and not all models have the same features, so beware! I like the brew stop feature, but not at the expense of setting the coffee strength. The other issue I have with all the Technivorms is minor, but still irritating. When the thermojug lid is screwed on, you have to set the thermojug somewhere other than on the plastic holder underneath the coffeemaker...it's too tall when the lid is on to fit.", "We just got this and I made the first pot. I honestly didn't think it would fit on our shelf or that I would like it. But A. Test Kitchen said it was the best and my husband wanted to try it. So I made the first pot. It's really quite simple, but you need to follow instructions. I would prefer a glass pot, and may regret that part of it. But......the first pot of coffee was very good. And I don't need another clock in my kitchen...there are clocks on the stove, wall, oven, micro....etc.Update: Have had this now for several months and we love it.", "Operates wonderfully but a bit overpriced and the carafe, even when preheated, doesn't seem to hold the temperature. The coffee is clean and tasty. I would buy again.", "It really is not necessary as the carafe will sit perfectly in the machine on the counter under the brew basket. I'm guessing the base would be fine for folks who don't need to move the machine back and forth under a counter.I love it and am glad to have made the purchase. Amazon made the purchase process flawless, of course.", "Be mindful on how fine you grind your beans as too fine a grind can cause a blockage and therefore a possible overflow from the brew basket. It is also not recommended to use gold filters. I purchased this particular model because I liked the idea of being able to remove the carafe without touching the brew basket, but honestly it brews fast enough that I have not used this feature.", "But they insisted on a receipt. I explained that I thought Williams Sonoma kept receipts in their computer system, but discovered that they delete records after 6 months. That didn't matter.Even though the design of my defective carafe was less than 5 years old and therefore couldn't be more than 5 years old, it didn't matter.Moccamaster is a good coffee maker but the critics who are talking about the plastic parts might have a point."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,153
|
Oh, it is quite long enough to toast bread. This toaster is far and away the most versatile and user-friendly toaster I have ever encountered.
|
{"question": "Is it long eough to toast bread.", "document": ["The toaster itself is really big for having only 2 slots. It is technically extra wide, but it is still needlessly big and takes up too much space in the kitchen. It also toasts really slow. Takes about twice as long to toast a piece of a bread compared to my old toaster. Pretty disappointing. Would highly recommend looking into a more compact and faster toaster.", "I am amazed at how long it takes to make a piece of toast on here. I am glad I have a very small family, or we would never get to eat toast. I also notice that bread toasts hotter on bottom than on top, not consistent at all.The little tongs are a great touch, wonderful idea.I am not going to pay to send it back, but would not purchase again.", "I cannot give a complete review of this toaster yet because we've only used it three times after it arrived three days ago. So far it's a winner! Our old toaster died after a long illness (half-toasted bread, having to set the bread in the slot "just so" to get it to drop, burnt toast when the control was set on "medium," etc.). This little red toaster is fast becoming my best morning buddy.", "* Bagel mode works as expected. * You can raise the bread quite high to get it out without burning yourself, and barring that it's got tongs! * The bread guides do not open wider than the lip of the slot, so the bread cannot get stuck under the lip of the slot when raising it. * The wire at the bottom is designed so that thin bread can't fall through.The one bad thing it has in common with the Waring is the slots aren't long enough for extra-long pieces of toast, but that seems to be the norm these days so I'll let it slide.", "Of all the choices of toasters we chose this one based on previous reviews and are very pleased with it's performance. However, it is just a toaster and we didn't expect a bunch of bells and whistles, just a reliable piece of toasted bread each time, which it does, and one that didn't take up gobs of counter space, which it does not. The next test is how long the toaster lasts or doesn't.", "We don't worry as much now with little hands reaching on the counter and getting burnt from the toaster since this one is cooler to the touch. The slots are wider than our old toaster and holds our bagels much better than our old one. It didn't talk long to figure out where to set the time on toasting bread. Defrost is nice on the unit too since we purchase bread in bulk and freeze some.", "I haven't had this toaster too long, but I have been happy with it.I have used it for bagels and toast and it works just great.", "Looks great, cool to the touch, but it takes a ridiculous time to toast an English muffin. Never had a toaster take that long, may return", "I haven't had this toaster for too long but I do like it a lot. I like the wide slots and the tongs so it is easy to take out the toast. I seems to be made well also.", "Toast done to a consistent browness. The tongs are real handy for picking up smaller items, such as English muffins, that don't stick up very high, and keeping your fingers from getting singed. The real test will see how long it holds up. It replaces a cheap Black & Decker that lasted for years but just finally gave up the ghost."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 189,163
|
Gandhi Appliance in US is the authorized service center for Preethi mixers. Following is their contact info: Location: 8125 Austin Avenue, Morton Grove, IL Phone: (847) 779 3079http://gandhiappliances.com/product-category/indian-kitchenware/indian-appliances/parts-accessories/
|
{"question": "My mixer stopper working with flying sparks within 3 months of ordering with just a few runs. Where is the warrant service available in US?", "document": ["Sparks came flying out the first time we plugged this grinder in the electrical socket and tripped the MCB. I would not recommend this product.", "This is a very good and consistent product , overloads but there is a reset button which makes it easy. The juicer is also great for making mango juice. The Preethi mixer/blender consistently has produced excellent results during two months of use. Its motor is powerful, and the availability of three mixing jars increases its versatility. I believe it is a high-quality product that will provide years of good service.Thanks The 4 jars come very handy. Love it ;)", "Good mixer but in six months this mixer has broke twice. Its too fragile. the first time the handle of the jar broke off. Then the motor broke. Considering that this mixer is so expensive I would expect at least 1 year of use. It is hardly worth getting it.", "The performance of the mixier is awesome...I am using all the 4 Jars...it is working fine from the day i purchased...", "Absolutely great indian grinder. Works perfectly.Grinds very quickly. Better than all US grinders. Very easy to use. Will not disappoint you. !", "i am not satisfied with the mixer. I received used mixer , it has food particles and scratches on the jars.", "I love the product. It works better than I expect, and specialy the little chutney mixer works great. Thank you Preethi....", "bought this product from great electric... This product excellent good, thanks Preethi nitro Mixer...There is super extractor included this , Mom liked it very much for juice extraction...This is very good product, worth for buying it.", "First off the quality out of box looks very mediocre.When switched on for the first time, there was a weird awful smell from the mixer.Tried after another day or so, this time it smell like something is burning inside.I immediately returned it.Amazon should do more quality check on these kinda products and vendors.I used to buy # of products from Amazon, never wrote any such bad reviews.But this one was utter dissapointment. Don't want anyone else to get into trouble with this filthy thing.Beware !!", "We were searching the good mixer grinder for make indian foods like idly and dosa. I ordered Preethi nitro Mixer Grinder with little fear about package, product and performance ( 3P ).I got the new product along with all jars and user guide DVD before the mentioned delivery date.We tried to grind rice. The result would be awesome. My wife is happy with the product when make the Co-Conut chutni.Only thing, we should know ...Which jar we have to use for which purpose.Kindly watch the DVD before start use the product.I am very happy about the 3P and Delivery."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,175
|
It's plastic. A lot of people buy the stainless steel straws separately (as did I) but I think the original straw is just fine.
|
{"question": "What is the straw made of? (plastic or stainless steel?)", "document": ["Very nice, good looking as well.Just knowing its stainless steel makes me feel better about how clean I can keep it.My plastic cup got to the point I could not get the bad taste out even using bleach.I have not had it very long yet, but I am sure I will have no complaints.", "Nice, insulated cold drink cup. Nice and big. I haven't used it for Hot, and probably wouldn't, because of the plastic straw and plastic lining on the lid. I don't like plastic, but for a cold drink, the little plastic in the lid makes minimal, if any contact with your drink. We will probably get some stainless straws, as well!The cups are nice looking, and we were thinking of getting a car decal or something to put on them so we can tell them apart and to decorate them...", "I replaced the plastic straw with a stainless one from another Amazon Seller. I use this every day, all day for nearly 6 weeks and I've had SO SO SO SO many compliments on this! It's a great size, insulates well, stands up to hot, cold, acidic lemon, smoothies-whatever and fits well in my cup holder in my car (the small one and the big one). I've added stuff like Mio water enhancer and was concerned that it may stain and it's been perfect. I've been careful not to submerge it into water (per enclosed instructions-neither the cup not the lid)My only two unsavoury feelings are these: The inner part of the lid is plastic-though it's quite sturdy, and I've had no cause for concern, I'm hesitant as plastic things break eventually.", "This is the best stainless steel tumbler I've ever had. If i put ice in it in the morning, it's still ice when I go to bed! It's incredible!", "Love the cup! Has a very sleek and great look to it! I like the straw that comes with it, however I'm buying separate stainless straws. If you are planning to use the straw that comes with it, make sure you get a brush to clean it. Please note that although it says its 18 oz, it really only holds 16 oz because of the insulated lining. Will update if anything goes wrong..but hopefully I won't have to. :)", "I'm scared it might break one day and I won't have a replacement-but like I said, I worry about everything all the time, so if you're normal, you'll be fine with it and won't give it another thought. The second unsavoury feeling is that when you screw the lid on all the way, there's a bit of wiggle room, like the lid wiggles back and forth just a little bit. It's not a big deal, like no leaks or anything (well except the straw hole) but when it wiggles, I worry the plastic will break, so I'm careful when I screw the lid on-don't reef on it to close it, take care of it...Other point to mention is the inside of the cup is matt, not glossy.", "There's nothing wrong with that, just worth a mention. My added stainless straw has mildly scratched the inside bottom of the cup, like maybe two or three lines, not a big deal. considering how much I've used it and abused it, it's standing up remarkably well. I'm almost considering buying another-JUST IN CASE something happens. Like I said, I've had so many compliments and so many people want this now, I should buy them as gifts for Christmas!", "This is the best cup on the market! It keeps my ice water cold for hours even in the hot car! It is very well made...I can't wait to more!", "These cups are just awesome. I use one for work and one for home. I put Ice in it at the start of my work day to keep my drink cold and by the end of my work day there is ice still in there. The thermal insulation is that good. Also great for keeping my drinks hot - but a little difficult drinking hot drinks through the straw.", "This cup is far better than the plastic ones. Drinks stay colder because the ice doesn't melt near as fast. I love it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 189,183
|
Looks like the CD-P1260 only plays 1 cd at a time where as the PD-D2610 is a 5 CD disc changer.
|
{"question": "What is the difference between TEAC CD-P1260 and PD-D2610?", "document": ["TEAC PD-D2610 5-CD Carousel Changer with MP3 Playback", ")TEAC PD-D2610 5-CD Carousel Changer with MP3 CD Playback", "We purchased the TEAC PD-D2610 5-CD Carousel to replace our failing carousel that was part of our 19-year-old Sony system. Out of the box, unplugged the old unit, plugged in the new, and we were up and running with no problems. We have had it about six weeks, used it heavily during holiday season. I was forewarned about not being able to power on and off and the lack of disc shuffle. Because of the location, the need to push the power button isn't really an issue for us, nor is the disc shuffle.", "The TEAC CD-Player PD-D2610 quit working after 2 years of light use. The component worked satisfactorily until the day it died without warning. The digital read out continues to light-up (as though working) but it no longer advances the discs or plays music. The unit was connected to all new equipment and seemed to function properly until the day it quit. This is a shame because it started out so well but it failed so quickly in the end. My experience is that this model belongs in the trash \"where it currently resides.\"", "I purchased this for my parents 50th Wedding Anniversay Party. which was 3 weeks after it arrived I keep it in the box until that night. open the box, sat it up on a nice table... well, here comes the boom .... I put on the 1st Music CD..getting the mood set...sound good... It played well..I can remember saying to myself, Girl, you did good.. time for the 2nd CD ti play... this TEAC PD-D2610 5 CD Carousel Changer...changed up alright..lol..no, not funny at all.. okay, I'm playing my parents (and their 40 guests) their favorite back inn the day Brand New CD's.. by the 4th song on the 2nd CD ...it started skipping?", "The TEAC PD D2610 5 cd Carousel Changer is a very good deal for the price i paid for it. It was very easy to setup. The remote works with many features.", "I am not a techie, so I need something like the TEAC PD-D2610. I play a lot of multi-disc opera. My only complaint is that it is difficult to find the first cd slot without using the remote control to key in on it to begin with. Thank God the remote control is a work-around.The sound from this changer is superb and well worth the reasonable cost.", "Bought First one didn't work rite would not shuffle the CD'S.No one here to talk to or call about this item.TeaC PD-D2610 5 CD changer.", "MY TEAC PD 5 DISC CD PLAYER IS GREAT. I ONLY DISLIKE THE REMOTE HAS NO POWER BUTTON ON IT. YOU HAVE TO TURN THE PLAYER ON WITH YOU HAND. THE REMOTE WORKS ACCORDING WITH THE PLAYER.YOU HAVE TO OPEN AND CLOSE THE PLAYER WITH YOUR HAND.NO PROBLEM WITH TURN TABLE. I'M REALLY ENJOYING IT.", "This was not possible since it was sent exactly as I received it.. They would not issue the credit. But to AMAZON'S credit, they will issue the credit and charge the seller. I could not rate the Teac PD 2610 5 CD changer since I was not able to use it.High praises to Amazon and only contempt for Limited GoodsI have since received a single CD player from Amazon and am very happy with its quality."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,190
|
3 feet high. Top is 14 inches in width
|
{"question": "what are the dimensions length, width, height?", "document": ["Love this. Worked out great in my small bedroom to put my TV on. Looks good too. Easy instructions for putting it together. I couldn't find the height of this cabinet and the width in any stores near me. I looked on line and finally found this one.", "I wanted black and this is the closest I could find. In some lighting it looks dark brown, but at first glance you'd think it was black. I really like the drawer and the fact that it's a bit higher than the sink. We got the entire set and they look nice all together. If you are interested in the entire set, the single door cabinet is significantly smaller than the two door even though the dimensions are listed the same. It's a good thing though. Putting them together was easy.", "I ordered 2 of these cabinets. At first I was a little concerned about ordering furniture online - but when they arrived I was very happy with how solid the pieces were. The knobs are not little plastic pieces they are solid, heavy, nice knobs. The color online doesn't seem accurate - at least not on my computer. It's a dark espresso - just what I wanted. The best part about his cabinet is the dimensions - this is the tallest one that I could find and it's just perfect. I put one in my livingroom and the other in my bathroom.They were very easy to assemble.", "just remolded bathroom but still need storage, this was perfect answer, matched the black and white them great, arrive promptly you do have to put together yourself, no problems", "easy to assemble. good but not the best quality of material but for the price, be satisfied. All parts fit clean and snug", "came scratched, 1 piece cracked, and missing a screw. still was able to build it and seems sturdy. though the scratch on front drawer is ugly, and the missing screw makes the item slightly less stable. I think would be more hassle to return the item. All in all, its ok.", "We were lacking space in our downstairs powder room and the cabinet looked to be a perfect fit. We really like the cabinet. However, when the first one arrived one of the glass inserts was cracked. We notified Amazon and we returned the original item for a replacement. The replacement was in great condition upon arrival. Please note the color of the cabinet is darker than what is on the website.", "We ordered two of these cabinets for storing wine glasses and extra entertaining supplies in our dining room. They appear darker than pictured, but are quite beautiful. They definitely require some time to assemble so allow about an hour for the first cabinet (the second went more quickly). Overall would definitely recommend, especially with the free shipping.", "We have a narrow space at the top of the stairs. This cabinet fits and looks good. It also gives us a little more storage space for our small apartment.", "Very well built and pretty. Amazing amount of bedside storage. Holds lots of books, a tissue box and my Kindle Fire with no problem."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 189,192
|
Yes. I have also the D80 and it works...
|
{"question": "Will this lens work with a Nikon D80?", "document": ["I bought this lens after a detailed comparison with the Nikon 105mm. Tested both with similar conditions, same images, one after the other and found comparable results. The only difference I saw between them was the focus speed of Nikon is slightly better than the Sigma. My considerations were more around sharpness and image quality as a whole: sigma's results were the same as Nikon. So I went ahead and purchased this lens.Definitely happy with the quality of the images, performance and overall built of the lens. Good work by Sigma in creating this wonderful lens.", "This has become my favorite prime lens. It's fast and very sharp, and is a superb macro lens. I highly recommend it. It's a perfect match with the Nikon D800E, the combination of great optics with the quality of the Nikon body.", "Extremely sharp across the lens at f/2.8-f/11. Happily surprised with the included carrying case (much more useful than the ones that come with Nikon lenses in this price range). Feels solid.", "I read all the reviews on macro lenses. I wanted one that would allow me to take great pictures of bugs, etc. This lens didn't disappoint! It is rather heavy, but feels well made. I don't want to pay good money for a lens that feels like plastic. I use this lens on my Nikon D5100 and it auto focuses quickly and quietly. I just have to get used to not having to stand so close to get my pic as this lens allows me to stand back much farther from my subject and get a great close-up.", "I'm really really impressed with the overall performance of this lens.It's got solid construction and a nice finish and aesthetics.Pros:- Awesome image quality- Good build- Value for money- Good design, aesthetics and materialCons:- The AF speed tends to be a bit slower (compared to the equivalent Nikon lens). However, when you take in to consideration the price difference, you really can't complain. This is the only slightly negative aspect of the lens I could think of, after using it for nearly a year.Definitely would recommend for anyone looking for a good macro lens, but looking to save a few hundred bucks.", "This lens could never be considered to be poorly built. It is built like a tank! It's a very heavy piece of glass and gives excellent sharp photos with nice boke.I would highly recommend this lens to anyone looking for a 1 to 1 macro / portrait lens.Pros: Heavy well built, Sharp, Nice Boke, useable on both DX & FX cameras.Cons: Autofocus HUNTS viciously in lower light, Heavy! a pain to carry around, Lens cap doesn't fit real well.Overall I do have to say I love the lens and it's quickly become one of my most favorite despite it's cons.I am using this lens with a Nikon D5100 body.", "Don't hesitate to get this lens!", "This is one of my best lens that I have. This lens has a very good quality of construction .", "I Got this lens about a month ago, the quality of the results meets my expectations, it is a little bit heavy, I would recommend it to my friends.", "I ordered this lens for the Canon EOS System. I received the lens with the wrong mount twice (hence the 1 star). I then ordered from a competitor. It is a great lens (5 stars)."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Extract information from the supporting document to answer the given question.
| 189,203
|
@Gustavo: Yes. Any amplified speakers, such as these, are made specifically to be used with non-amplified sources (i.e., virtually non-amplified). That would include any personal computer, iPods and other MP3 players, and frankly, anything with a headphone jack. They are still called "headphone" jacks since that's what their original use was intended for, and then the speaker companies had an existing and standard sound-out jack to take advantage of. DAMAGE CONTROL: Always be safe the first time you use any new speakers by beginning with the volume controls (on both the source and the speakers) set to low, and gradually increase them.
|
{"question": "use with ipod? does anybody know if I can hook up an ipod directly to these speakers? If so, does it hook through the headphone jack? Thanks.", "document": ["It is an inrcredibly loud precise system and I am scared to and will probably never use its full power unless I put it in a space at least that of a 3car garage.I currently live in the dorms at my college and the system, or sub, can be heard from multiple rooms away. When I'm not listening to music I hook it up to the headphone jack onmy TV and use it for that as well. It is great for that use as well because of how crisp the speakers are. The only thing I wish I could change about the system is making it a 5.1 system instead of a 2.1.", "The Logitech Z-2300 speakers are attractively two-toned in black and silver, which is a theme I've continued with all my computer hardware. They come with a wired control remote that grants convenient access to power, volume, and a headphone jack. Because my motherboard was poorly designed, I can't use the headphone jack on my computer case. As such, the port on this remote proved a nice feature for the speakers to offer. In case you didn't know, the \"2.1\" in the name means two speakers (left and right) and a subwoofer that puts out pretty decent bass.", "Let me tell you, I was right on the money!I will say that I was a little surprised at the sheer size of the things when they came in the mail. The fed ex shipment said that the box was about 36 lbs. So don't be surprised when you see how big the sub woofer is. I see that other people had mentioned this in their review as well.The system is extremely easy to set up. Take everything out of the box, save the packaging (in my own opinion), plug the satellite speakers into the back of the woofer, plug the woofer in, and make sure your placement is to your fancy and hook the audio jack into your computer, ipod, game system, dvd player, or what have you...and voilaa!", "I have never even turned these things up more than half way because they carry so much sound and base. They make watching movies amazing. I always get comments on how good the speakers sound. I also love how they are fairly small and easy to move. Very mobile. The other nice thing is that since they are PC speakers they can be plugged into any device (iPod, mp3 player,, etc) or really any device with a headphone jack. Great speakers. I have held out and scored these for $100 bucks each time.", "This got better when I added 6' RCA cable extenders to the satellite speaker wires which allowed me to separate the satellites a bit. But still not great. The volume knob thing is nice, and it's nice to have both volume and bass adjustment handy. I guess you could have easily put the controls on one of the satellites like everyone else though. The headphone jack on the volume control seems pointless to me, but maybe you'll like it. What I wish was that you could have an aux input on the volume thing to plug in your ipod or something else.Office - JBL Creature II 3-Piece Powered Speaker SystemThese 2.1 speakers don't have the total power of the Logitech Z-2300, but they have much clearer and better imaging.", "The system has a very clean sound. It doesn't overwhelm you with harsh noise when the volume is up, only clean sound. I'm satisfied with the system for my purposes; it's used as a pc speaker as well as a DVD player speakers. The remote has a cool blue light when on and has a headphone jack (turns off the speakers when a jack is used, very nice).If I have to gripe about it it's that the speakers are not wall mountable (but they were turned it upside down to hook up the base's edges to the wall hooks).LN", "I just received my speakers today. They arrived ealier than expected. The box was bigger than i thought. When i first took them out of the box the first word out of my mouth were wow! They're black and silver. The picture shows the front of the speakers not covered but they are. They are super simple easy to hook up. If you have a Notebook, like i do, then you put the green cable into the headphone jack not the microphone jack. Took me a few minutes to figure that one out...duhSound quality: Awesome!", "They wouldn;t have the power to fill a living room, or even an office. By the time you're 6'-8' away from them, the imaging settles out a bit. But for your desk or as satellite speakers for a TV that didn't come with great ones already, they are perfect. They are a little bigger than many desktop speakers overall, but since many desktop speakers are oddly shaped with leaning towers and wide stands, they actually don;t take up as much more footprint comparatively. The volume and headphone jack and aux in are all on one of the speakers, very handy for access and for plugging in your iPod at your desk.", "The cord you hook up to your ipod or any other device is fairly long, I have my speakers set up around my tv in my dorm and the cord can just reach my desk so I can play my music on my laptop also and there's a cord you can buy for that if you need it longer, it's the one amazon recommends buying but that one looks a little cheap.Also if the sound is bad it's probably not the speakers, it's most likely a poor quality download since I know a lot of people download from limewire and other sites out there.If your looking for a great pair of speakers for a decent price these are it, and you can hook these up to your game system or tv but for the tv you need to buy a male to male rca audio cord which I plan on doing and the cords are cheap also so it's definitely worth it.Just get them already!", "Received these speakers as a gift for xmas this year. So far they have been superb. Installation was extremely easy and hassle free, everything connects to the subwoofer so there is relatively little hassle with cables and such. The sound so far as I can tell is great, very crisp and the bass from the woofer is great and really adds the the overall music experience. The volume controller is real easy as well and has a separate control for the bass so you can adjust from zero to full on bass sound. The connector is great as well and is easy and doesn't require any specific MP3 player type it's just a simple headphone jack and the cable is plenty long meaning you can hook it up to the back of a tower and still have the volume controller sitting right on your desktop."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 189,217
|
HD tv doesn't require much work if any on the part of the graphics card so this one will be easily capable of handling wow at max settings.
|
{"question": "I want play WoW at max settings on 1 monitor and stream HD TV on my other monitor. Would this card be good or should I do a 780?", "document": ["The graphics card is the most important part of the desktop. I pretty much BUILT my desktop to be able to play Tomb Raider on max settings at 50-60 fps. With this graphics card, I'm able to do just that. The temperatures and noise level are good. I considered the 780, but that costs $200 more and I'm already hitting 60 fps at max setting at 1080p, so that upgrade would be pointless for me. The Gigabyte Windforce has slightly higher factory clock speeds than EVGA as well. And it looks better :)This card just has the best performance for it's price!", "Update: 5/10/1014this has easily been my most favorite graphics card ever!! im currently running 3 monitors and have added a fourth (dont recommend the fourth if you are wanting to play games on max to decent settings its a little bit to much for the card but it handles three very well by itself) still playing most games on max settings minus only using X2 AA but things look amazing and play well i get anywhere from 20 to 30 fps its very playable and that's the fps at the most graphic intensive moments still a quiet card and a champ im using it with my nvidia shield and its still over kill for 1080p scenarios console mode and such and i am utilizing the 4GBs if you run 3 monitors its a must have i think on Black Flag im using 2.6GB up to 3 i cant wait to try it on watchdogs nvidia and Gigabyte did a great job with this card worth every penny and i bough it before the prices dropped_________________________________________________________________Owned for almost 5 monthsPros:stays very coolruns 3 monitors near max settings and on most 2013 games it can do max settingspretty quiet2dvi, 1hdmi, and 1 display portthe price is amazing for what your gettingwhat more would you want^^Cons:the price dropped even lower after i bought it... lol seriously thats the only thing i can find wrong with it i bought it for about $430 and im still please with it.FYI when i said it can play most games at max that is with 3 displays its pushing by itself and i have yet to find anything that has required me to lower it off of max or near max also i run at 2X or 4X rendering anything over and i cant tell a difference.. if you just have one card then it will be overkill for almost anything in the future except 4k displays i cant comment on those because i dont have one nor do i ever plan on getting one.", "I built a fast computer back in 2006, Gigabyte GA-N680SLI-DQ6 with fastest Intel Quad Core Extreme processor QX6700 (overclocked to 3GHZ) SLI GTX 880, 4GB Corsair DDR2 Dominator ram Western Digital HD Raptor, 800W PSU etc...30 in Dell monitor. But I was never really able to get good FPS at 2560x1600 so I sold the GTX 880's and got two GTX 280's. Still had issues at 2560x1600. Just removed SLI setup and installed this card. All is good. Now I don't have to build a new computer for a while although the legacy hardware is the bottleneck for me but at least I can play TF2 in a 30 man server with all settings on high and other setting maxed out with amazing mouse/video response.", "I have been a EVGA fan boy for years, but I never got a high end card. The last few cards I have had was EVGA's GTX 570 HD, 560 TI and a 470, they all are very nice but under load the fans would fire up and it would sound like a banshee crying out in front of a turbo prop airplane and the cards temps would get up to 85c (even with tweaking the fan settings)The 570 had been playing most current games with no issues, except when trying to play the new Tomb Rader game in 3D mode, also I could not do a tri monitor set up with the 570.This bad boy... Tomb Rader in 3D has to be one of the best 3D games I have seen yet!It also does awesome in a Tri monitor set up, I used a 27 inch and 2 23 inch on either side, (I have heard to really do it right to have exact matching monitors) and it works ok for the most part :-)MSFS X is awesome, EURO Truck Sim 2 scaled very well and I was impressed on how real that worked, but some games the main menu gets really warped.But the best was running the win amp visualization in \"full screen\" with all the settings turned up.And my last comment from an X EVGA \"fan\" boy, is boy I have not heard a peep out of this thing, and under full load the temps have not gotten over 70C.I did manually bump up the fans to 100% and they are loud like EVGA, but am I sold on windforce and as far as I can tell it works great!", "Awesome card. It runs any game at 48-60FPS atleast and in most cases a flat 60. I'm not going to exaggerate like the people who obviously aren't enabling Vsync(I did get 200 FPS in D3 but there's no reason to not be using Vysnc for a flat 60 FPS/120 ect. ).I still run with good old fashion 1080P and 60Hz(it still looks pretty damn good imo).Rig:CPU:8350(modestly overclocked to 4.3 on stock cooling)Memory: 16GB Corsair @ 1600mhzVideo Card: Gigabyte Windforce 3X 770 OC 4GB(My previous card was a 650ti 1GB)Monitor/TV 42\" Panasonic Viera Full HD 3D TV (BABY?", "So the card can handle Skyrim, Crysis, etc. like cutting through butter (as quoted another reviewer). I consistently get 60 fps when playing Skyrim and its mods. However the reason I upgraded my CPU (to a core i7-3770k, overclocked) and bought this card was that I hope I would be able to play FSX at max or near-max settings. And the results are good. Following a tweak guide on youtube (FSX TWEAK GUIDE 2013 by Matt Davies), I was able to get 60 fps flying over water and mountains (Sitka Approach mission), and around 20-35 fps flying over Seattle (San Juan Island Run mission).Setting up Surround Configuration is very easy too.", "A 780 at the time of purchase was a touch over $600, and with good deals running at the time I purchased this card for just over $400. You are not \"future-proofing\" per se by choosing a card with 4GB of VRAM; I would not want to mislead you into believing this card will withstand the test of time (such is not the nature of rapidly advancing technology.) However, if you intend to run multiple games simultaneously, or are interested in heavily modifying games to dramatically change the visual experience (GTA IV, Skyrim as some examples) then a 4GB GPU may not be a bad option for you.", "I love this GC, it plays all of the games i want it to play very well and can power 3 monitors pretty well, it is about as good as a standard 780 for like half the price, completely recommend getting it.", "For the enthusiasts out there...Sure you can get a few more FPS with a 780, BUT if you are content with gaming on 1080p, you can use a 770 and play any game on the highest settings. Personally, I have two in SLI and game on 1440p. I'll be upgrading to the 780 Ti soon, but these have been fantastic cards to game on. I've played in 1080p on 1 card and maxed everything out, and I've used it on 1440p and nearly maxed it out. 2 cards are a bit overkill to get just a few more FPS, but that's what we do in the PC masterrace.", "One monitor being a 27 inch monitor and the other being my plasma TV and the card is able to handle the setup easily.As for the negatives. Well in a single card setup the card has a lot of trouble handling Crysis 3 on very high settings in 1080p easily going up and down from 55 to 27 fps. It's kind of a cruel joke to seeing as how the card can easily get 60 fps on max settings with 4xAA during the opening scene before New York, but once you get to New York the card has a lot of trouble on very high settings."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 189,236
|
Oops, what I happened. It said I answered this question yes... But actually my answer is No. Plastic cups will melt. I always use a porcelain pudding cup, which can withstand a lot heat. They are oven bake safe.
|
{"question": "Have any of you tried using this for creme brulee made in clear custard dishes (Anchor Hocking)? Will they break? Don't have brulee ramekins :(", "document": ["So, if you purchase this item, you should try using it before filling it up.I made 2 creme brulee in 5\" diameter dishes and used about 1/3 of the fuel. It hold enough to make 6 or more so you don't have to keep filling up. There is a small knob on the side at the top of this torch which I didn't know until I was done using it (read instructions!!!). It is to hold the frame so you don't have to keep holding the turn on button.", "I've tried these both. This one's not nearly as nice in look and feel as the other one made by the company, which I ultimately decided to buy instead:BonJour Creme Brulee Chef's Professional Culinary Torch with Fuel Gauge. It's literally just a few dollars more but a huge step up in quality and appearance for such a small added investment. It also performs flawlessly, and fuel was easy to obtain at my local Walgreens for $5.", "I purchased this torch to use for Creme Brulee. Mine did not come full of fuel as other reviewers mentioned, so I was glad to have purchased a fuel refill. After filling it, it worked fine on the first ramekin, but continued to go out when I tried to use it on the second ramekin. I repeatedly tried and it just kept going out. I followed the directions and made sure the flame indicator was in the mid-range and even tried adjusting the air valve, but every time I use it, it just sputters out.", "I got this because my boyfriend loves creme brulee. I had never made it before (I was lucky and it turned out great) and using the torch was easy (it came filled with butane which was a bonus). I don't know enough to compare this to other torches, but as a naive customer trying to get the job done, I am very pleased.", "Came perfectly new in a box of its own with a instruction manual that was made very clear with no chance of confusion. Works great as well. Didn't buy it for baking or cooking but for vaping(oxidizing SS mesh and heating my 28ga wires.) The locking mechanism on the light button is a nice addition as well.", "Got this to make creme brulee. It was inexpensive, but easy to use. Honestly, I couldn't be bothered to figure out how to put the butane in, but my sweet husband made it work. All I had to do, was point and burn! The creme brulee was tastey and the torch worked! Would recommend.", "My son and daughter-in-law really like creme brulee and frequently get it when they go out to eat. I decided to surprise them with thie BonJour brushed aluminum chef's torch with fuel gauge. It is very well made and just the correct size to burn the sugar on a ramekin of creme brulee. They were delighted with my gift.", "I have been using it for all sorts of things(toasting marsh mellows on hot cocoa, creme brulee, but mostly melting cheese on um...everything) and haven't burned down the house yet. I highly recommend this torch.", "This culinary torch looks great, and works beautifully. I like the visible levelof fuel, which makes the torch ready for work . It can be used for many dishes, notonly creme brulee : I have caramelized onions on appetizers, apples on tarts, evencheese on soups, it's fun to use, works every time, makes you feel like a chef atthe table ! I don't miss my old one a bit. A great tool for the price !", "Needed to stop using my workshop torch on my creme brulee, so found small chef's torch my son recommended on-line. Bought one and it works well enough. It would be nice to have a little bigger gas tank, but for no more often than I need it, I would recommend it to anyone for home use."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 189,244
|
The knives are plain (straight) blades. They are not grooved (serrated). The blades are shorter than you would expect however. After buying this set, I would suggest getting one of the more expensive Chicago sets.
|
{"question": "does these knives have grooves or just plain ones ?", "document": ["I have used Chicago knives for many years (since they were given to me as a gift over 20 years ago). It is nice to see they still have the quality as the first ones had. I have replaced a few since the gift I received and have always gotten Chicago knives. The knife holder was also just perfect, small, but very nicely made.", "The knives are what you might expect for the price. They looked like some other Chicago Cutlery knives that I have that are much better so I expected more. They cut more like a saw than a knife and being serrated are not easily sharpened. They also have thinner handles than my original ones. I wish I had shopped a little more carefully and found the better quality ones.", "I was looking for a few decent paring knives to replace some older ones that I'd had since I first moved out. I worked my way through college as a cook and chef, but continuing as a chef wasn't an option, financially, in my area. The degree gave me much better options, but I love to cook, and I do most of the cooking in our house. My wife bought me a nice set of Henckels knives over a decade ago. Fast-forward to today, and they are still in excellent condition, but several of my old, cheap paring knives were getting worn out...These popped up on sale as a daily or lightning deal.", "Solid, sturdy, and very sharp knives. Good quality.", "Chicago Cutlery has excellent products, and these knives fit that pattern!", "These knives are my favorite all purpose knives and are used daily for all my slicing and chopping when cooking.", "Like most of Chicago Cutlery's knives, they are well-made and durable for inexpensive knives)!", "These are excellent steak knives for the money. I have a block set and wanted these to fill out collection.", "These knives are a little shorter than you'd expect, but still pretty good, considering the price. The quality is satisfactory.", "I love these knives and they come with a nice sleeve to keep them sharp in your drawer. I own several."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question using the supporting document.
| 189,260
|
small, I measured and its a bit less than 4 inches with shrinkage, so like 3.5 to 3.75 inches I would say. Four inches maximum, but definitely not 5 inches as it is confined by the size of the indentation spot where you place the masa.
|
{"question": "size of arepas ?", "document": ["It is a great Arepa Maker...We are so happy that we have found it in here....Now we can make our Venezuelan Arepas!! !", "You can notice the low quality as soon as you unbox it. Moreover, it does not cook the arepas properly.", "It takes for ever to cook the arepas. They end up soft and not toasted like they are supposed to.", "I have not use it, but it seems that would be good to cook a good quantity of arepas fo a party.", "Doesn't cook all arepas evenly other than that it great! I am looking for one to cook 8 arepas. Thanks", "Is good for making arepas and quick cooking maybe 10min . I recommend, I don't like the color but no is problem..", "great product. even cooking and quick cooking.arepas do not stick to pan. come out evenly cooked.easy to clean", "Good buy perfect it is the correct description and I had no issues with it. Highly recommended. Get to make my arepas away from Venezuela. :-)", "This arepera working very well, the arepas are crispy and good but the shipping price is so expensive near the price of arepera, why? But is an appliance useful all the days for a colombian family.", "The arepa maker works well, It has worked for 2 years and it is still good. This arepa maker makes the arepas not thick. It works nice and fast."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
val
| null |
Answer the given question by extracting information from the supporting document.
| 189,290
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.