output
stringlengths
1
8.55k
input
stringlengths
189
11.8k
options
null
task
stringclasses
1 value
setting
stringclasses
1 value
split
stringclasses
3 values
few_shot_example
null
instruction
stringclasses
5 values
__index_level_0__
int64
20
234k
I think it may be projector specific. This did work OK with my Super 8 projector, but my regular 8 mm projector would not focus at a close enough distance for the image to fit this screen.
{"question": "I have regular 8mm movie film, not super 8mm. Will this device still be effective?", "document": ["The unit dose work but rather difficult to align projector and camera/camcorder for proper transfers.The unit comes with instructions and an alignment sheet however moving the 8mm or slide projector and camera or camcorder to proper focal distances/angels is tricky. I shot some film using the unit then shot the same footage using a standard movie screen the resulting video quality looked the same no improvement using the unit.", "I purchased this product because I located some decades old super 8 and 8 mm film reels in my attic and wanted to get them into a format that could be more easily viewed than a projector with bulbs that blow so fast. I also intend to edit and add still photos taken through the years after putting the videos into chronological order and sharing with family. I researched having a company do it, but the cost of $8 per 50' of film and having over 3,000 feet made that too costly.", "Using the box it came in as an extra height stand, I put the mirrored screen on top the diagram for positioning. I moved my old 8mm movie projector until the image filled the screen, focused, rewound the movie I had been using to do set up. Then I set up my point and shoot digital camera to do video and set it to focus on the screen and started both it and the projector.", "Good idea for the device but the projector and camera are not in sync. The camera that I have cannot be adjusted to the low frame rate and it picks up the flickering of the film. The Film Transfer System device is well made but just didn't work for me.", "This allows for the best head on shot (to minimize the keystone - not quick square - output on your camera). It also reduces the flickering and bright spots to a more subdued viewable and recordable output.This item may work very well for still slides without that flicker. But I did not have good luck with it trying to record my reel film images for editing and sharing on the computer.", "The transfer system works well to help transfer my 8mm film to digital format. It's very easy to use and it's a great \"poor man's\" alternative to the expensive WorkPrinter systems.", "The product description lead me to believe that all I needed was a digital video camera and a tripod to work this product. But you also need your own Super 8 projector. I had to send it back unfortunately.", "My family has a lot of old super 8 movies laying around which we have never watched. I wanted to have them digitalized so that we can enjoy them. I did some researching before I found this \"box\", ordered it and it came within a few days. I brought it home for Christmas and it was amazingly simple.", "This arrived in very good conditon and it has worked just like it is supposed to. I have transferred my super 8 movies using my digital camera and they look great. It came with a template which I used and everything lined up perfect. It is nice that the whole process could be accomplished on a card table.", "It is easy to set it up and takes little effort or technical knowledge. Just adjust the camera so it captures the frame correctly and hit 'record'. That simple!I only converted super 8 movies but next time I go home I will try it with slides and old pictures."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,037
No. I have had for about 4 months and have not noted any backlight issues.
{"question": "Last question, my mother has a back light issue. Does this computer have a noted backlight problem were it won't show the screen on certain angles?", "document": ["This time partition was wrong but it worked even after spent 5 hours putting all my software back on. HP support wanted the computer back but I was able to use the 2nd Partition to store my programs.I love this computer. It is fast, light and when it works, works GREAT. However, I warm anyone who buys one, I think there is some kind of software problem with it and HP doesn't have a fix as per my experiences.", "However, this computer is black, the letters are red, you can only see the keyboard letters in daylight sometimes if you have the light on for back light. If they could find a way to make the keyboard easier to see like Apple did, then it is a simple fix.-Good battery life. Even though it has a strange issue where it goes from 50% power to 25% power in all of 2 seconds. The battery life after 1 year is still averaging 4-5 hours.", "I never used the password storage software thingy, so I do not know if the same problem happens there too.-The keyboard! First of all, the red print on the keys is very difficult to read when the backlight is off. One must keep it on to be able to use the computer even in decent daylight. Second, to be able to use the F buttons (e.g.", "My charger worked on another computer but it was not working to turn my laptop on. I leave my laptop charging on the original charger that came with the laptop and it still will not turn on. I talked with technical support and they said they would take care of the problem and that I would have my laptop back within 9 business days. I stressed to support that I could not go this long without my laptop.", "SO, I can only conclude that it is an HP software issue that needs to be fixed or addressed for those who buy this computer OR I just got two bad computers? If it fails again, then back to HP it goes.In any case, AMAZON.COM is the best! I'm keeping my computer after all of the above because if I sent it to HP for \"fixing\", I'll get it back with ????? installed and I won't risk it.", "Send back to HP because wouldn't write the OS recovery DVD and wouldn't charge when plugged in. They just fixed the charging issue. Send back to HP for service again to get the DVD writer fixed and HP said they would make the recovery media for me and fix the DVD writer. No recovery DVD included when the computer was retured from HP service and the software application that creates the recovery media isn't on the computer any more.", "I love this computer because it is a nice size, and is lightweight but powerful. I don't have to baby it since it is built to take some bumps without talking back or shutting down on me! The sound is awesome which I was hoping for and it hasn't let me down. I like the sleek look of the black case, and the red lighted keyboard is fantastic so you can use it in a darkened room or low light.", "I told her that was unacceptable as it would HAVE to be a defective screen, given how it went bad on its own without any wrong doing or accident on my part. At that point she said I can assure you it was not defective and if you want it fixed you will have to call back and spend $349 to fix it! This is a six month old computer folks and all I did was open it to use it and was confronted with the black blotch on the screen.", "I purchased this laptop directly from HP (so you will not see a Amazon Verified purchase tag for this review). This is a very nice laptop overall. The matte screen is quite bright and has a great resolution unlike most other laptops of this class in the market. The weight is also just right. Its not ultrabook light but its not very far off compared to all the extras you get.", "Not just to my eyes either. The light colors were washed out, blues were purple and white etc. This was the first time in all the computers I've owned and used that I've had to calibrate a screen. Interesting process and I sort of enjoyed doing it, but it shouldn't have been necessary. When I finished calibrating the screen, text especially small blue text was a mess. The Cleartype tools fixed this after 5 or 6 tries and now colors and text look great especially with the 1600 by 900 screen."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,060
2 5/16 inches. It is nice for fixing a roast, on top of the stove, and roomy enought to add potatoes and carrots. Have to be careful and use a pot holder when lifting the lid because the metal on the lid handle gets a little to hot. Overall it is a nice size skillet.
{"question": "How deep is this skillet?", "document": ["This pan is fairly deep for a 10 inch frying pan so will take good amount of food. The cover is handy to prevent splatter and can act as a steamer. Non stick surface is very slick, cleans easily.", "Really nice pan. Actual dimensions are 10.5" outside dia. at top and 2.25" deep. The sides are abrupt not gently sloped as is visible in the picture. Great quality pan as is the lid. Somebody entered the wrong dia. writing up the ad. Cooks great, glad I got it at that sale price to replace my old heat high centered T -Fal pan. Nearly vertical sides can make sneaky removal of delicate foods harder.", "I use this as my utility pan to brown meat and make skillet meals, and couldn't be happier.", "I'm so glad I bought this skillet, I don't know why I waited so long. It's beautiful, and the nonstick makes everything really easy.", "This is a nice size skillet. It is nonstick and a very nice looking pan. A lot of my pans are made by T-Fal and I have always been very satisfied with their products.", "My aunt loves her new skillet that I got her for Christmas! I had bought one for myself, and really liked it. So I sent one to my dear aunt, and she loves it.", "Have had the skillet for about three weeks, and it has been a great improvement over my older skillet! Food does not stick, and it seems to give even heat throughout the bottom of the pan. I would recommend it!", "I am very pleased with this skillet. It cooks evenly and simply wipes clean. It feels solid and performs like top rated skillets do, you won't regret getting the Professional category skillet", "Yes, I was thrilled to see T-Fal that would work on my induction cook top. It's non-stick and wonderful! I did not want a huge 12" skillet, this is 10" and very easy to handle.", "I go through skillets more than I do pots and pans. I really like the red dot in the middle that lets you know it is hot. I use a skillet most every day and this one is holding up well so far."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,079
The Kindle Paperwhite, in its cover, will rest fine in the holder; however, since it is quite thicker that the iPad (or iPhone), the lip that holds the iPad in place does not come around the cover. Rather, the Paperwhite rests on top of it. So, in other words, it works, but not perfectly.
{"question": "Do you know if it would fit a Kindle paperwhite, with the leather cover on?", "document": ["I am impressed with the quality of the stand. i use it with my Kndle Paperwhite while using the stationary bike. It works very well for this purpose. It is easy to adjust the angle and the removable insert in the stand allows it to fit the Kindle in its cover. Highly recommended.", "ready my kindle at the table a lot and got tired of setting it against things and having it slip down. this is awesome. wish it would have a little thicker tray so kindle fit better with case. BUT, over all, it's excellent. I just have to not fold my cover over and it's a fine fit.", "This little stand is amazing. It is solid and can be set in whatever angle you like. I use it for my Ipad with a cover, not a problem. My husband has the large Kindle DX with a leather cover and it even holds that without a problem. He was so impress I had to order another one for him.", "This is a great stand for my Kindle Paperwhite. I have the Amazon cover and while it doesn't sit down in the stand, it sits on the lip perfectly and hasn't fallen nor does this effect it in any way.Very happy with my purchase.", "My husband bought this for me to use with my Kindle Paperwhite. It does work, although it fits better when the cover is folded over to the side rather than behind the Kindle. The stand is small and not as stable as some others, so I'll probably keep it in my suitcase to use when travelling.", "It a great stand, I use it to hold my kindle while I eat lunch, both my kindle paperwhite and my kindle fire fit great in it.", "Exactly what I needed for securely propping up both my iPad and Kindle Paperwhite. Would definitely recommend it to anyone.", "This little stand is light and configurable. My iPad rests here while charging and waiting for me to use it again. I also have one for my Kindle paperwhite. Simple well made product. If Apple was selling this it would be $39.99.", "This little stand is just what I was looking for to make reading on my Kindle Paperwhite more comfortable. The stand is a bit heavier than I would like, but that does mean it is sturdy enough to support the Paperwhite safely, and if I remove the plastic pin, I can leave the reader in its case, which is a plus. Also a BIG plus is that the stand adjusts to any angle!", "The engineering and labor are excellent it is solid and will not tip over or slide like others in its class. My only suggestion is that it should be a bit wider where the stand holds the tablet etc. since I have to take the cover off of my kindle so that it may fit. It does have two settings."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,092
There will be a few reasons why your alarm may go off. Upon initial set up the system will test itself and check the battery, During this time you may hear the alarm. If everything checks out okay the alarm will stop and the battery will be on charging until needed. During regular operation you may hear the alarm because the system continues to do checks sporadically, about once a week. During a power outage the alarm will sound informing you that the system is on battery backup power. When the power returns the alarm will shut off. If the system finds any trouble such as the battery dying or the battery depleting itself during a power outage the alarm will go off more rapidly. If you receive a constant alarm that means that there is an issue with the battery, or you have overloaded the system with too many devices, which will not allow the unit to function on battery backup power. I hope you find this your question.
{"question": "Can anyone tell me more about the alarm? Why does it go off and will it turn off when power returns?", "document": ["Bought this backup battery surge protector to protect our directv receiver. Used it for 2 months. When power went out in the middle of the night a beeping sound goes off that you can not turn off. Like you cant tell the electricity is out you need the battery backup to beep continuously all night? Really? Then after only 6 weeks, the power didnt go out and one day it just starts beeping, wont stop, and the only thing lighting up is that the battery is not good????", "If the power goes out for a couple of minutes at night, it wakes me up to tell me about it. What a stupid design.On some of the better APC UPSs, you can connect a computer and turn off the beep, but the BE350G doesn't have a USB port and it seems wasteful to buy a huge UPS just to power a cable modem.", "I ordered this for my new computer, and we had a power flicker just a few hours after I set it up! It worked perfectly. There is software included that will let you check the status of the battery and tell the unit what to do if it loses power (such as turn off the computer). Very useful!Two things to note:1) Make sure you connect the battery!", "I bought one of these to keep my TiVo up when the power flickers. I cannot tell you how many times that the unit alarm starts going off at night. I check the unit, power it off, and then try to power it back on. The unit alarm keeps going off. The only way to get is started back up is to unplug everything, power the unit back on, and plug the TiVo back up.I thought that maybe it was the particular unit that I have.", "For the money I couldn't turn this down, and I was right not to. I have frequent power fluctuations at my residence and this has not only ended that frustration, but also lets me know when they occur. Turns out there are a lot of tiny ones as well that don't always knock out your electronics, but can damage them over time. I would recommend this is a working solution to anyone with my problem. It has three battery supported plugs and three regular plugs.", "For the rest of this, this product would be immensely more enjoyable if we could plug it in and forget about it as it quietly protects our electronics against power surges....or had a physical button to turn off the alarm.", "Standard UPS, not much to it. Well made and works the way it should. I wish I could turn the beeping alarm off; I dont always need to know that the power is out.", "This is the only UPS I've been able to find where you can completely turn off the alarm... No audible alert when the power is not supplied and no alert when it completely shuts down. Perfect to feed a bedroom DVR. But you have to make sure this setting is active using the PowerChute software.", "Not pleased with this product. The alarm will sometimes start sounding (a long, high, continuous beeeeeeep), perhaps caused by a power surge in the line, and there's no (practical) way to turn off the alarm except for shutting down your computer and turning off the UPC.I bought a UPC for uninterrupted workflow during power surges, and instead it causes more hassle than it prevents.", "If you need enough power to continue working, buy a generator! I have also seen some complaints about how hard it is to attach the battery - I didn't have any difficulty doing so (turn the unit over so the battery comes loose, slide the connector onto the empty terminal, then slide the battery back into the case). Other complaints are about how loud the alarm is, how hard it is to insert plugs, and that some systems don't stay powered."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,117
Most likely, I'm not sure about the fish tank, but it is a very sturdy cabinet, so I would think it would be fine with the tank on top.
{"question": "I wanted something to put baskets with DVDs in and a 10 gallon fish tank on top. Would this do? Thank you", "document": ["It's horrid to look at because we wanted white and now we have a light brown/tan/cream piece of furniture. So in spring it will be painted white.If I had the choose to buy this again, i probably would look harder else where, but I didn't dislike it so much that i would have returned it. Too much of hassle once it's put together.", "Top quality designer furniture this is not, but it is very good for my needs. Don't get me wrong. I gave it 5 Stars because the price/quality relationship was so good. I would not put it in a high quality kitchen setting, but it is a well made product that looks good. It would be nice if the maker had provided small covers for the bolt holes at the ends, but the overall effect is not bad.", "Especially because there will be bathroom items in there I dont people seeing. Would deffinitly recoomend this product for bathroom, kitchen, and bedroom storage. I wanted it white, but you can pretting much paint this any color.", "This was pretty easy to put together, and was exactly what I wanted. I couldn't beat the price! It came to my home quickly, and was packed well so there was no damage.", "It doesn't look cheap, and that was my biggest concern. It was easy to put together, I wish I would have brought 2.", "Nice and airy and these fit that feeling. We purchased this top unit and put it on two of the lower, enclosed door units purchased at the same time, to make a three section unit which is about 75 inches high. Perfect for needed extra storage. Inside the open end we hung small cloth curtains to make the contents of the lower units invisible and to keep out excess dust. Overall effect is pretty good.", "The open sides are a puzzle -- why?? But the unit fits the space. I do long for days when assembly was done at the factory but I guess that would be too expensive to ship from China. It took about 3 hrs for one person to put together. Everything was included - no extra pieces. Takes a Phillips head to put together. Would be easier for two people but once the first pieces are in place it was ok... I've put together worse pieces.", "And we may just do that, because it is a nice look in our dining area.But then I think about having to repaint it white, as it is not white or any shade of white. This says antique white. And it's more of a cream, tan or beige. If antique white means taking something white and setting it in the sun to yellow for years and years then they hit the nail on the head.", "It's cute, the instructions were a little vague (the pictures do not match the product) so there was a bit of guesswork involved. It's smaller than I thought it would be so some of my larger items don't fit but that's fine with me because I don't have a lot of room in my place so smaller is better. It looks great it does it's job of displaying my great-grandmother's tea set and it didn't cost me an arm and a leg.", "I would have expected more out of this, for the cost. The wood is soft and will NOT hold the wood screws in place. Everything jiggles, and it constantly breaks apart if you so much as try to move it. The wood itself feel sturdy, and it looks very nice, but looks can be deceiving. I have purchased pieces of furniture from walmart made of that cheap sawdust and glue combination that they call wood that held together better than this did. Will absolutely be returning for a refund."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,154
Due to high humidity your safety tank is full. Move the a/c to a safe area, pull plug in back and drain it. FT means full tank
{"question": "what is the flashing warning Ft?", "document": ["The window attachment was a bit flimsy, but works ok after some work. I set it on dehumidify, since it is only about 90 so far. It cooled my 300 sq ft bedroom down to 68! !Can't wait to see how it handles 113 Phoenix heat!", "Had it for two months. It cools down the entire first floor of my townhouse, a large combined livingroom/diningroom (about 800 sq ft). Set it up in five minutes. It's bigger than I thought and more beige than the image implies, but works so well that I'll buy another for the second floor next summer. The electric bills have been minimal.", "I'm using this to cool a much larger area than it should. I live in Palo Alto, so it doesn't get too hot here often, but we have days in the 90-100F range. I throw this on and it cools half my apartment during the day (with 12 ft high ceilings) and the entire place (1100 sq ft) at night when admittedly the temp drops.", "True to its advertising you can easily set the unit up and have it running in under 5 minutes. It is very well packaged and the instructions are simple yet adequate. The unit works well and has easy to understand controls. No complaints on that side.I have the unit in a 250-300 sq/ft bedroom with a 3 foot vault in the ceiling (which traps a fair bit of heat).", "This is a good a/c for a room where you don't want a window unit, for one reason or another. It is not quite as powerful or efficient as a window unit, but it's nice that it's portable and doesn't require the annoying installation of a window unit (though the vent pipe is annoying, as other reviewers have mentioned). It cools a large room (700 sq ft) very well. The remote control is also a nice touch.", "We use ONE unit to cool down an almost 900 sq.ft. area by about ten degrees below what the outside temp is. We have a 102+ year old home that has no air ducts. We also used a couple of box fans to circulate the air while the initial cooling took place. We have not had to empty the overflow humidifier pan once, even though we live in Michigan and it's really humid in summer.", "So far, this has been fantastic. Setup took about 5 minutes. Timer works perfectly. Remote is very convenient and comes with batteries. Cooling output is unbelievable; cooled our first floor within about 10 minutes.The only warning I would give is that in the box, the unit is very, very heavy. If you live alone, know that you're better off unboxing it on the porch by ripping down the side of the box.", "fast cooling, no water problems, quiet, easy to install, very reliable, energy efficient, going to get a second one soon", "You could opt for other installation options, and there are parts included where you could drill a hole in a wall for your vent...but then it's not exactly \"portable\" at that point.Do yourself a favor - if you're venting this out a window, try to install it such that you can keep (or put) a screen on the exhaust end of the hose.", "You can also pick whatever temperature you want. The portable air conditioner can be used in several types of windows including sliding, double hung, and casement (you can also install it semi-permanently).For many years we've used window air conditioners to cool us off in the summer but our windows are old (they really need to be replaced) and for the past few years we've not been able to properly install window air conditioners and have suffered through the hot summers."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,165
If the receiver has terminals to attach an external AM/FM antenna, it will work. You cannot attach this to an existing antenna.
{"question": "Will this antennae help with a radio that has a telescoping antennae already on the radio?", "document": ["The antennae was as described and works great. It arrived quickly and I was provided a very nice antennae for the price. I recommend this antennae and the seller also!", "The Axis dipole antennae works just fine, pulls in stations that i had trouble dialing in without it. Superesy to install, just make sure you elevate it enough,", "It seems like the more you spend on an antennae, the worse it works. I've tried various set top and/or self amplified antennas and, in general, they just don't seem to stack up to the tried and true. Granted, these are far less attractive, but if it doesn't work, I don't want it. You can always hide this with a poster or picture.", "Pretty simple or basic unit. Didn't really help with my rural FM reception over the single wire unit that came with the stereo.", "needed antenna for my reveiver i figured this would help me get better reception but not so much i got a little better but not near what i thought i was gonna get but that my be due to the metal siding and roof of my house im gonna get an outdoor antenna for it", "worked great even reordered for another radio", "I tried it, but it did not bring my radio stations in any more clearly - oh well, back to pandora", "This inexpensive devise greatly improve my FM radio reception of numerous stations, and is definitely recommended.", "Now we get great reception on all the local FM radio stations. Previously, we had trouble with stations fading out.", "I use that antenna for my Sangean radio and it work very good . Good reception of fm station ."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,167
You can not use anything above the 5# model due to the size of the opening i have this model and they don't make a tube small enought for this reason
{"question": "What would be the largest size sausage stuffer that still would work for snack sticks ?", "document": ["I purchased this product about 3 years ago in preparation for making some venison sausage. As luck would have it, I didn't shoot a deer that year, so this sat in the box until last year. Unfortunately it doesn't work at all for stuffing casings...there is major blow by between the plunger and tube. Upon further inspection, the tube is very out of round about halfway down.", "Sorry to say that this did not meet my expectations. The stuffer was a lot larger than I imagined , but that in its self would not be a show stopper. I tried to stuff 6.5 lbs of meat into hog casings, at the end I still had over a lb of meat left over. Partly due to meat leaking round the seal and partly because of the residue left in the base and tube of the stuffer. I am returning the machine in the morning.", "This stuffer is easy to use and would rate a five if that was all I was rating it for. I have used it twice and have made fifty pounds of summer sausage with it. It worked great for that.It falls down in my rating because of two areas. The first is lack of cleaning instructions. The booklet that comes with the stuffer only instructs you to wash all parts with warm soapy water.", "would work better if it came with some type of clamp for the table move all over the place.works good for larger sausages not so much for small casings.", "Stuffed a 15 lb. batch of Italian sausage in 15 minutes! Would have been nearly an hour with my old stuffing method.", "This is so much easier and faster than stuffing with the old horn style stuffers. I do have two complaints; one is meat will get wedged in between the \"O\" ring and the plunger when you retract the plunger and cause a blowout when using the smaller stuffing tube You have to clean the \"O\" ring almost every fill up. Two, it doesn't come with the 13mm stuffing tube. I was able to stuff 20lbs of snack sticks in about 15 minutes.", "don't mind the skeptics this stuffer works great may have about a half a pound of meat left when done stuffing that you can easily do by hand the stuffer is definitely metal because of constant worry for my counter tops only wish the stuffing horns would be metal.", "This sausage stuffer performs excellently. Ran a 10 lb batch of Potato Sausage with ease. I can highly recommend this product", "This stuffer worked much better than the way we used to make sausage, which was with an attachment on the meat grinder. There is way more control with this manual stuffer and the meat doesn't resemble nasty toothpaste when it goes into the casing.", "Hubby and I used this stuffer for our first attempt at making sausage. Worked well. Took two of us to do it but i'm guessing that was because it was our first time. Made sausage quickly. Love it."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,171
The back of the shelf is about 16" wide. It's sort of hard to answer your question because the thing is sort of triangular (if you look down at it from above), and the edges are curved in toward the flat part in back. But the flat edge that fits against the wall is about 16". The screened part that's part of the back (that has holes for cords) is 9" wide, centered in the 16'' flat part of the shelf-back.
{"question": "What is the width at the rear of the stand?", "document": ["A minor inconvenience but it would be better to have the entire rear of the stand wide open for full access to wire connections. I know I can't complain, just look at the picture, right? But the components I purchased (Emotiva amplifier and processor) are deeper than most and the back brace is much wider than I expected.", "The shelves are wider and deeper than most I found online which was good for the components I had purchased. Overall, it is sturdy and well built and I can honestly recommend this for anyone seeking an A/V stand or just an attractive stand for nick-nacs.Here's the "but" part. The one thing I didn't like is that the design of the stand makes it so that the rear brace runs down the middle of the back.", "This Stand is very attractive, well constructed, and fits into small spaces. I would recommend it without any reservation. Love it", "I love this stand. The only flaw it has is that it's a little did life cult to hide the cords if u have a bunch of components but other than that....it's great!! !", "The stand looks great, it was easy to put together - great value. With prime the unit was shipped and delivered quickly. No regrets.", "The stand works great for my corner area and brought the height needed for TV viewing. Good solid product. Easy to assemble.", "We bought this stand for audio equipment and we love it. Good quality and was easy to put together. Looks great in our room and would recommend to others.", "... it lacked a couple of holes for the provided screws so I could not put in all the given screws which is important for it to be stable. Result - not a 100% stable stand.", "You cannot go wrong with this component stand. Assembly was easy, took about 15 minutes. The quality of the wood and the tempered glass are better than expected. This is a heavy piece, so expect that.", "The stand arrived in great shape protected well by the packaging. The color matched my expectations extremely well. It was easily assembled by following the instructions and sketches. Good value."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,188
Yes, with Velcro, so you can't turn or rotate them. A year later mine are holding up well.
{"question": "Are the back cushions attached?", "document": ["If you have any questions about this sectional, reply and I will reply back to you. Have an awesome day and you will definitely enjoy this purchase!", "But loved the size, the ottoman was bigger then I expected even. The reason why I gave it 3 stars is the option of having the chaise on either the right side or the left. The holes for the screw on the arm rest did not fit for it to be on the left neither did the back piece.", "This sofa is comfortable and good-looking,the fabric is beautiful and cleans up easily. I have gotten some chocolate on there already, so I put a little Spot Shot on it and the spot disappeared before I could even wipe it. With the chaise, there are a few lounging options, the cushions are firm but not hard and the height and angle are great for me (5'1\") and my husband (6'1\").", "This sofa is incredible. It looks just like the photo shows and it is very comfortable. It is the perfect size for a 800 square foot apartment which is what I have. The delivery process was very easy. Took two week to arrive and comes in two boxes. You do have to assemble it but it's not that hard. Just attach the arms and the backs and screw them I'm place. All in all great couch for the price and free shipping is an added bonus.", "This sofa arrived last week. I am giving it two stars because it looks nice. Hoever, it is seriously uncomfortable and cheaply made. Perhaps, I would be more satisfied if I had only paid around 500 for it but at 860$ it just makes sense to spend and extra three hundred and buy something that won't make your neck ache.", "This sectional has exceeded my expectations! The fabric is very soft and it's the perfect size for a family of 4. Love the chaise and the ottoman..perfect for stretching out and getting comfortable. Purchased this sectional from AtHomeMart and everything went smoothly from purchasing to the delivery of the sectional. Our chase had a small defect in the fabric and AtHomeMart contacted Poundex on our behalf and arranged for a replacement cushion. Great customer service and a lovely piece of furniture.", "This couch came in three boxes and needed to be assembled. This actually saved us because we weren't sure if it would fit through a doorway in our 90 year-old home.As a couch for the playroom, it's awesome. In fact, I feel that it's more comfortable than our expensive living room couch.Having both a chaise and ottoman make this couch great for lounging. It also comes with two pillows.So far, so good!", "The quality is just right for the price. You won't be sitting on a cloud, and you won't be sitting on the floor either. It's firm but just right. I would rather have a couch that is firm first and be broken into. The corduroy pattern is awesome and the material is very smooth and feels great!The only issue I have is that at the bottom edges around the couch may give you splinters.", "The fabric is soft, and even though I have a dog that weighs about 40 pounds, it still holds up. It is a very dark brown, and I could not be happier!", "My husband and I love this couch. It's really comfortable (not too soft and not too firm) and a perfect size for our small(ish) apartment. It was pretty easy to put together and it looks nice."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,207
Found it has to be absolutely level.
{"question": "After a month, the microwave started to make loud buzzing noises while in use. It still heats the food, though. Is it normal?", "document": ["Just got this microwave about a month ago. Worked great out of the box. Still works great. I love the little dial at the bottom and how each spin adds or subtracts 30 seconds. Heats up food very quickly and evenly, and is fairly large. Absolutley no problems so far.", "It's small, perfect for my use--though I will not be cooking a turkey in it, I do lots of small prep work and of course the reheating aspect. Much faster to micro my water for tea. I like the dearth of buttons, and though am still figuring out settings, etc., I've been able to get started with basics intuitively. Very lightweight so you have to open the door either with two hands or with finger against frame, otherwise I pull the entire unit off the counter.", "We had a Half Pint microwave for a couple of years before it stopped working, and we wanted something a little more powerful but still small. We bought this microwave and love the rad look it has and all of the cooking features...even though they will, in all reality, never get used. The one thing I hate is the 24-hour time display. I can't figure out why this is the only way to display the clock since the majority of people don't use 24-hour displays.", "Perfect for our small kitchen space, looks nice on the counter, and doesn't take up to much room. We only use our microwave for reheating coffee, food, and thawing things and it does the job!", "After reading some of the negative reviews, I hesitated before buying this machine. I'm so glad I listened to the positive reviewers. As some of the other reviewers have noted, it is sturdy and very attractive, Though it is wonderfully compact, it is quite powerful. It heats evenly. And don't be deceived by the "retro" concept. This is a sophisticated machine, with a host of pre-set, computerized timings for cooking a variety of foods.", "Unpacked it. Loved it. Look great in my kitchen. Used one time, heard it make a "pop", but didn't think much about it. Got ready to use it again and nothing. It would NOT work. So had to submit for return. Pack it up and Take it to my local UPS Shop. What a waste of my time.", "Not terribly happy with the way this machine works. It looks good and true I did not realize the importance of a carosel ...this machine takes so much longer to heat up items and it heats unevenly. Will likely use sporadically unit I buy a better unit.", "Then turn the dial up/down to add/subtract seconds. Quick and simple! This is a better system than my full sized micro.Pros: Easy to use dial. 3 beeps at the end, and then the machine is silent. Candy apple metallic red is well done. Far fewer beeps to have to endure as you set the timer. Best of all, you can add/subtract time with the dial as food is cooking, in 10 second increments.", "There was a slight cooking plastic smell for about the first month. It was outside the microwave and did not transfer to the foods or liquids. It's now gone.", "Works great but very loud. It matches my decor and we live with noise. A high power microwave. Can't complain."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,223
1.5 liters, 6 cups, 50 ounces.
{"question": "what is the volume of the pitcher?", "document": ["I just had to swap out the blade/rubber gasket/end cap from the plastic pitcher to the glass one and everything was fine. Maybe you can get a cheap B&D; glass pitcher on "a famous auction site" and use it with this blender.", "This blender does a great job. The blade is sharper/faster than my old blender. I have used it to make smoothies and onion salad dressing, among other things. Chunky foods are well-blended and pureed. The pitcher is plastic, with a tight-fitting lid. The base is rather large, though, making the unit high - it barely fits under my cabinet, but does.", "the blender is great i use it everyday when i can smoothies and shakes i love to blend up all kind", "We use ours at least 3 times a day, 7 days a week and it has worked perfectly for almost a year now. I would have given it a 5 star rating, except finding a replacement part is turning out to be a nightmare. (the piece that attaches the blade to the container - melted at the bottom of the dishwasher last week) Replacement part cost: $15, when I could find it. Yikes! Better off buying a new one. Advice on replacement parts, anyone?", "This works well enough, not the smoothest blender, and not THAT strong. But for a smoothy or for blending other soft or a bit hard things, its not bad. The price is appropriate.", "This product for its very low price does allot more then I was hoping for, and when it eventually breaks down I will replace it with another.Works just right for me ;)", "This blender is good for quick (30sec or less) and light jobs, such as a mostly liquid mix with a bit of fruit or something added. I used it for a while blending protein shakes and it worked fine.What killed it was trying to blend some thicker stuff--a mixture of chia seeds, corn meal, some frozen fruit, and water (sounds delicious right?).", "Right on down the middle. A sigh of disappointment.I quickly google search 'bl2012bp parts' only to find that this piece is not a wear part and cannot be purchased by itself from Black & Decker or an appliance parts seller or wholesaler. So it's a quick dead end for my trusted hot sauce machine. I will be buying a nicer, more expensive blender instead. I'll likely go with the Cuisinart.I would still recommend this blender to blending novices because it's extremely light weight and easy to disassemble/clean.", "Impressed with the smoothie function on the blender, works quite well in blending up frozen berries & such. Seems to have just the power that is needed to blend frozen items.", "I've had this blender for about a year. It's been great! Very simple design but it has MANY blending modes for all kinds if stuff. I've made frozen alcoholic drinks, soups, smoothies, milkshakes. But mostly I use it to make hot sauce with vinegar, hot peppers, spices, etc. This guy cuts it all. While peppers, big chunks of fruit. TOTALLY AWESOME!Until yesterday."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,233
Its not noise cancelling the way you think, there is just layers of filters that will filter out background noise. Like the foam piece around most microphones except even better. The mic is the highest quality you can buy on a headset and you wont need to worry about that at all.
{"question": "Can you turn off the noise-canceling feature on the microphone?", "document": ["Specifically with Battlefield 4. I can hear small things like water drops and shell casings rolling on the floor. They provide surround sound so instead of stereo right or left, I can hear the helicopter fly from my front right to my back left as if I am the player and the helicopter is flying over me. Exactly how the game is designed. The microphone is just at advertised. The noise canceling is superb.", "Exactly what i had expected. Clear sound and the mic works well. When you turn up the volume, the sound just gets better instead of harsh. 10/10. would recommend", "As for the mic, it must be doing an amazing job because the first time I used it I had a 20 minute phone conversation with my boss while running from room to room to keep away from my toddler's screaming and barking dogs. When I finally gave up and apologized for my non-professional behavior and background noise, he responded, "What do you mean?", "The mic sound quality is great, my voice is crisp and clear, very important in games like Battlefield where there is a lot of action and background noise at the same time.3) Music - I wanted to mention that although not advertised, these are great for listening to music. Ive used them to listen to rock and hip-hop mainly and even without custom tuning my EQ, these sound great.", "I priced commercial "office" and call center style headsets and was underwhelmed at the audio specs and "noise cancellation" options out there. Having been a recording engineer for over 10 years in my previous life, I decided to shift my search to high quality headphone manufacturers that I've had experience with in the studio and Sennheiser tops that list for "open" ear designs, all day comfort and sound quality.", "Alright, so I was needing a microphone, and wanting a better headset, and this one exceeded my expectations. I had decent headphones before, Sony's xb500's have done me a solid, but these ones have an overall better sound and a microphone, and they are so very comfortable!", "This is a wonderful headset.I bought them for general computer use, Dragon Dictation, and selection and enjoyment of music online.They are very comfortable, and more durably built than previous computer headsets that I've owned. The microphone is excellent, and music reproduction is quite a step above most computer headsets.", "Obviously these are not practical for wearing out, with the microphone and all...unless you just don't care.4) Value - This company offers top of the line audio headphones that will run you 1.5K for a pair, they are serious about sound. For $249.99, you are getting great value with the G4ME One. Personally, I would have paid $400-$500 if thats what they cost for these.", "This is a good argument when buying expensive headphones, however in the case of the G4ME One, metal would add much more weight. The whole concept with these was comfort and sound and to make them comfortable they needed to be light. They are in no way cheap or not durable. Ive had them for almost a month now and they are still like new.5) The last point is a point I want to make by itself. The cord is split into two cables: microphone and headphones.", "The V2's cannot compete, it's not even close. I was comparing the specs for the G4ME ONE headset against other Sennheiser headphones (not headsets), and they are somewhere around the 558 level. The Frequency Response Level and Impedence is identical between the two, but the SPL is higher for the G4ME ONE. It would be interesting to be able to listen to the 558's and other Sennheiser headphones to see how they actually sound compared to the G4ME ONE drivers.4. The microphone is top notch."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,247
Not unless you have a high deff monitor like 1080+ the ram helps more with resolution then detail really I use this for battle field 4 max settting s and with a 1920X 1080 p monitor and it works fine 60 fps steady
{"question": "Is it worth spending another $50 just for another gig of vram? I do want to play games like Battlefield 4 on almost full settings if that helps.", "document": ["You'll be able to play all the ultra high end games at 1920x1080 no problem. Some games like Crysis 3 you may have a dial it back a little, but you'll still get high quality settings. Comparing this card to it's competition is like comparing gold to copper, it just doesn't compare. The AMD Radeon 260x, which is around the same price, doesn't even compete. It's like 15-20% slower.", "Been using this card for a few weeks now. Every game I own on my PC I play on the highest quality possible and I never get under 50-60 fps. Even on Battlefield 3, which happens to look stunning on Ultra.", "This GPU is amazing I can play Far Cry 3, borderlands 2, crysis 3 and others games with all graphics options at high level, without any loss of fluidity, and best of all is the low price. If you want to play any game, should consider buying this video card.", "Their is no dislike about this. This thing lets my puny dual core play fall of cybertron on mid settings :D. Brink and Deus Ex on Med ,etc. I thought i would never be able to play these games again till i got this card. The thing is huge and takes up half my Matx case But it runs quiets and cooler than my gt 610 (my last card).", "For the price you can't get a graphic card with this performance..It plays BF3 on 1080p ultra settings with 50 fps average, enough said..", "Got this for the realease of the Battlefield 4 Beta and man it delievers power...AND HEAT. Runs BF4 at 60fps Solid the whole time.", "This is amazing in my new RIG build. Amazing graphics! I was blown away. Screw gaming laptops. Desktops are the way to go. Worth the buy!", "And the 7790 and 260x are the same card just with a different name, and the 650Ti Boost outperforms both of them by a large margin, yet they cost the same. If you only wanted to spend around 90$, then the 7770 is the best, but the 7770 can't compete with the 650Ti Boost at all. So, I think I made my point, in this price bracket, you can't find anythin better than 650Ti Boost unless you pay at LEAST 40-50$ more.", "Needed a card for a 2nd system which was running ATI fit the bill and budget very well handles most everything I play on it getting excellent fps, EVGA software works very well ***before you install this card completely uninstall your previous display drivers use Display Driver Uninstaller utility (download.com) to make sure...", "My memory usage runs around 900MB when playing PlanetSide2 and Battlefield 3 on Ultra with temps never reaching more than 70-75C. Keep in mind that I'm using the HAF 922 case with 6 fans in it (2x 230mm) so that could attribute to lower temps. I have not done any overclocking with it yet as I haven't needed to. Why OC it when you don't need to? As I said earlier, my FPS run great already and I have the \"low end\" GTX 650 Ti Boost."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,287
Warranty is for one year. If it needs warranty service, Panasonic makes you send it to an authorized shop that can be some distance from where you live. There are nearby shops that are capable of fixing them, but not for warranty work. Kenmore bags and filters, available at Sears and Kmart, work in your cleaner. They are easier to find and somewhat cheaper than the Panasonic number.
{"question": "What is the warranty? How expensive are the hepa filter bags?", "document": ["This vacuum is excellent. It's much quieter than the our previous 10-year-old canister vacuum, and it has much more suction power. The pile on our carpet looks greater after vacuuming. Bear in mind, though, that the replacement bags and hepa filter are expensive.", "Suction is more than excellent and it is reasonably quiet. The only very minor criticsm might be that the door to the accessories is a little cheaply hinged and the lid to the hepa filter also a little cheap-feeling to open. But overall,everything else that counts is superior to any other cleaner I looked at even those that were more expensive.", "The Hepa Filter has to be replaced periodically.- Economical Dust BagsEachDust Bag (MC-V150M)can hold a lot. The bags on this model have been re-designed to hold more dirt than the bags on older Panasonic models. A 3-pack is very economically priced.Ergonomics----------- The Power Switch/Slider has 3 modes: Off, Floor, Carpet.", "Handy controls and accessories. Great supple hose that turns 360 degrees. The entire tube/vac head unit can attach upright to back of canister for storage. The pet piece clamps to the front and everything else on on board. Has GREAT hepa bags, and can take regular bags. It also has a second hepa filter which is reasonable in cost to replace. To go from carpet to floor--thumb is right near button.", "Own it for 6 month.pros: Good suction. On/off switch on the handle pretty convenient. HEPA filter.cons: Fiber bags C-19 are expensive ($6-8 per bag), but can use paper bags as well.Good value for the money", "I LOVE Panasonic canister vacuum. The handle of the vacuum is firm, sturdy, yet, contoured to fit a hand--any hand.Feel the power of the suction, as the debris flood through the vacuum hose, trapped cruelly by the palimpsestic layers of hepa filter, ultimately enveloped by the hepa vacuum bag.The design of the vacuum cleaner is cloaked with the smooth,clean line of modernity and simplicity.", "The cord is long enough to allow you to vacuum large areas of your home and with a push of a large button on the top of the vacuum (with your foot) the cord retracts back into the vacuum for easy storage. It also has a very nice Hepa filter for those with allergies. Its not one of the cheap ones either. This one works! The brush on the main vacuum is easily adjusted with a foot pedal that allows you to set the height of the brush to 3 settings.", "Purchased one month ago and seems to be a good vac thus far. Only used twice and I find it to be Quieter than expected. If used more, I can see how it could get more costly for bags and hepa filters when replacements need to be done. I will leave future comments as use of machine continues. Before purchasing this unit make sure you shop and compare. Prices will vary but amazon ranks higher than most others for fair pricing.", "This vacuum cleaner works nicely but the bags are small and very expensive. I would spend a little more money and get a LG bagless as it is better.", "I've been using the HEPA bags and they last a long time before they are full. Do note that the HEPA bags are expensive (at least in my opinion) so keep that cost in mind when purchasing this."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,312
Hello Vaishanvee,Stone grinders are generally used for crushing/grinding corn, nuts, and other large items. Stone grinders usually have large pores which trap fragile oils and juices; however, these large pores give the stone the rough surface needed to crush large items without getting smoothed over.Granite grinders are used for strong herbs and small spices. Granite has the special ability to be either rough or smooth depending on the finish. "Fresco Granite Mortar and Pestle, Black, Small" has a Rough End granite grinder, with a smooth end for comfort. The rough end is great for crushing mint, sage, and other herbs without absorbing most of the oils.Marble is almost the same as granite, but can be even less absorbent and smooth. This is ideal for maximizing the oils collected from plants and herbs. Beware most marble Pestle Mortars don't take well to large spices and nuts.I hope this helps, sorry I could not answer your question directly as it matters on "the intent of use" rule. I would suggest Granite Pestle Mortar for diverse use. I am in no way a professional, so please feel free to disregard what I say:)
{"question": "stone grinder in granite or marble is better?", "document": ["Bowl is solid, inner surface grabs seeds well. Variations in stone-- the pestle was dropped, and broke along a natural fault.", "It has a nice weight to it and it's very nice quality. It has just enough texture to help blend but not get everything stuck to it and in the cracks of the stone. Totally worth the money.", "I chose a darker color due to research. There are some beautiful pale marble mortar and pestles available out there, but uppon reading about them, you must avoid putting acidic or heavily pigmented foods in them. The marble is suceptible to any acidic foods, and readily takes on colors of other objects (ie-spices).", "Just received this today, beautiful granite, well made. I've already used it and it is perfect, just what I was looking for.", "This is great! I love the granite. It's easy to use and clean.I grow fresh herbs and spices and use this frequently.", "has a nice polish on the handle and outside of the mortar. But notice that the working parts of the mortar & pestle are not polished. as a consequence when you grind you get bits of granite in the mix.", "Nice heavy granite with a one cup capacity. Polished on the outside and left rough on the interior to facilitate grinding. I am very pleased with this product, it's exactly as I was hoping for.", "I love this mortar and pestle. It is heavy and solid and just the right size. I google how to "season" it before I used it and didn't have any issues with granite dust. Highly recommend!", "I was excited about getting a granite mortar and pestle. I was disappointed when it arrived and the edge was chipped in two places. It works fine, but it is such a nice looking mortar it is sad that the edge was chipped.", "I have used this multiple times now and love it! A very well made nice quality granite mortar and pestle. The heavy granite makes it easy to crush and grind spices, or dried chilies. It does need some sort of slider or vinyl tab thingy on the bottom though so it does not rough up your counter."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,333
Yes, I was able to add powder gradually to the scale and it displayed the gradual increase. I did not have to add and remove the powder cup.
{"question": "Can I trickle a powder charge and have the scale display the weight change in real time, or do you have to add, remove, reweigh?", "document": ["Accurate and easy to use. I found that after trickling in additional powder to come up to the desired charge, it may take a second or two to register on the scale. Accordingly, if I add some more powder, I wait a couple seconds before adding any more so I don't exceed my desired weight. I use the scale on a very firm table,away from heating vents in the room, and plugged in to the AC adapter.", "I followed the instructions for first time use. After that, I tested it with various units of known weight and it was perfect. So, what more could I ask for? I would recommend this scale to my friends.", "The large digital display is easy to read and it's simple to use. The instructions say to leave it turned on for 24 hours before using it for the first time and if not used for about a month or more. I thought that was a kind of a strange requirement. Other than that, it works fine.", "This sure beats using the standard scales. I used to measure my powder charges using two beam scales to verify the charge. I now trust the accuracy of the Lyman Micro Touch 1500 Electronic Scale 115V 7750700.", "Works very well and is very accurate with a couple of provisos. Leave it on all the time and dont use it where a heater or cooler draft will blow across the scale while in use. reading will fluctuate with the airflow over it. Also do not move the scale from the position you calibrated in once you start measuring. Otherwise compares dead on with a very expensive balance beam scale I used to use. Love the backlit big digit display. Highly recommend.", "Not a jewelers scale by any stretch.....especially in price. Does what it needs to and does it fairly well. Weighs the same charge to the same weight repeatedly.", "I like this scale for my purposes of checking charge weights from my RL-550B when loading handgun cartridges. As a best practice, I calibrate the powder measure and continually throw and weigh charges on the Lyman until I've got the correct charge for what I'm going to be shooting.", "Love this little guy. I was skeptical my last digital scale was all over the place and was accurate above 10grains or .5 grams anything below that sucked. Bought this little guy for pistol 10mm auto. I hand weigh every charge close to max levels and this scale is fantastic. My last scale would shutt off quickly and had to be recallibrated each time it was turned on. This little sucker stays callibrated and is ready to go till u turn it off.", "I bought this scale and was disappointed that I could not get the unit to calibrate after several attempts. I followed the instructions to the letter but this scale could not be calibrated to show a repeatable calibrated weight. I also had a problem with the on off button on this unit. I sent it back and although this was the first time I had to ever return anything through Amazon, I am very pleased with the way that they handled this return.", "Very nice scale. I replaced a malfunctioning AWS scale with this. The touch screen operates well, and the backlight it great in low light conditions. The scale measures quickly and very accurately. The included powder tray and calibrating weight makes this all you need to measure powder accurately.Only downside is the scale flip cover is too small to accomodate the powder tray, so you have to leave it sitting behind or next to it."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,353
It's approximately 29" to the bottom of the desk and 29 1/2" to the top of the desk. The approximate height of the entire unit is 75".
{"question": "What is the height of the desk?", "document": ["This was purchased to help the conversion of a pantry into an office. Very sturdy. Perfect height between shelves. Just bought a 23" TV to use as a monitor, and mounted it on the wall, so the entire area of the table-top is available. The black laminate is very 'thick' and rich-looking, and polishes up nicely.", "This desk was easy to assemble, and works just fine. It is black, which was not well described. Good price for a nice piece of furniture.", "I love my wood desk with shelves. Very easy to install. It looks good with the other shelves I purchased in the past.", "I love this desk!!! We have very limited space and this provides a nice area to do bills and computer work. Very sturdy and well made.", "Great lean desk half the price of others and easy to put to gether , love love love this leaning desk", "The leaning desk was easy to assemble, spacious enough yet did not take up much room. It was sturdy enough without attaching it to the wall.", "Easy to assemble. Modern look. Sturdy and space saving. Good with load bearing books. Reasonable price. I'm a grad student and work at this desk daily. I love it!", "I love the leaning desk. I am ordering a second one to put on the other end of the living room media center to balance it out. Assembly was kind of annoying because I am not very handy, but other than that, I love it", "got a set of this with book shelf, nice package and design.however, the built quality on this leaning wood desk is around avg. (not as good as ikea).overall value is ok if you consider to buy one", "This was a fantastic buy, and we received delivery the very next day. Saving almost 70 bucks! This seems to have a larger desk area then the Sloan model. We've put in our kitchen area and absolutely love then way it looks."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,354
Yes you can. You would wire the two 6" to the front channels and the sub would be wired to the two rear channels but in a bridged fashion. The polk manual should show you how the wires should be run the be bridged properly with that particular amp. As far as sub goes I have a polk DXI 12 in one of the polk ported boxes they come with powered the same way and it sounds great. It won't shake the neighbor hood but provides very good low fill.
{"question": "can i power 2 6\" speakers and a subwoofer? If so... What's a good subwoofer to go with? I think my 2 fosgate 6\" rear speakers are 80 watts each.", "document": ["I have 6 of these pa series amplifiers hooked up in a classic van. I am running no less than 4 ohms per channel. For the most part I've had nothing but good luck with these amps. I am using Cadence Flash series 6x9 , and 6.5 component speakers as well as Lanzar Pro Subs and lanzar Pro 6.5's. I think these amps are a great bang for the buck when properly Installed. If buying used. Make sure you test it right away......", "I thought, \"wow! Thats awesome!\" and bought a big amp that could put out 300 watts to each speaker. I instantly fried my speakers!lol. Later on I learned those speakers only put out about 50-60 watts RMS. Lesson...match amp and speaker RMS as close as possible, and set gains correctly. You live, you learn.lol. Hopefully this info will help someone not make the same mistakes so many of us have made in the past.", "I have a 2012 F150 extended cab. I installed a new head unit, front DXi6500 component speakers, a 10" Pioneer sub and the amp. Sounds great!! Plenty of power to crank it up. Crystal clear sound.", "Best 4 channel amp in the market today,good thing i sticked with this one rather than those offered in the market. Now next in my list is the subwoofer...", "this gives my speakers the perfect amount of power and makes everyone else's cars sound horrible! love this amp a lot!", "Ran it at 3/4 volume for about 30 mins and the amp did not go into protect mode. Going to give it a full test run soon as I get my gains dialed in a bit better. Overall, it seems to be a pretty nice amp so.", "Purchased this pa660 used for cheap. All i have to say is dont buy it used, i wish wish wish i had a full warrenty from Polk directly. the amp has a ton of clean power, very good looking. love it, but it has a hiss comming from the rca connectors. it has nothing to do with my car's set up and wiring (i tested and tested), but directly hissing from the amp rca's. that is my 1 and only complaint.", "I bought one of these from Best Buy for $129 new. It was on sale and it was an awesome amp. I needed another and the price went back up to over $200, and I found this good condition used one here for about $100. It came complete and works perfectly. I definitely recommend this product and this seller.", "Just hooked up my PA660 and its quite nice!Ive got absolutely no unwanted noise as with my old RCA amp.This amp has plenty of power for the casual car audio user.Have it runnin 75W X 4 @4ohms to a set of Polk DXI 650s up front and a set of Morel 6x9s in the rear...and amp pushes them nicely...such a crystal clear sound compared to my last RCA amp.The piano black finish is super nice!", "Great price.... great amp..... just hope it can keep up with the monster's in the back!!! Clean power ............."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,377
I believe so, it will handle thin to medium (thickness) liquids. Highly viscous liquids like honey would be difficult to stir with this whisk.
{"question": "IS this GOOD ENOUGH to reach CORNERS of the pan when making CUSTARDS with eggs? Because eggs scramble easily for me, especially the corners.", "document": ["I learned, already, that the handle IS heavier than the whisk, so it is best not to try to rest it against the edge of a shallow bowl or pan. I love the way it gets into all the areas of the pan or dish. It is great for making scrambled eggs and the silicone will not scratch your pan.", "Sits flat, flares out so that you can reach into corners of the pan. Non-stick heat resistant silicone is perfect for use in all non-stick pans. Whisk itself works well; no lumps. Great little gadget.", "There's something about the shape of the wires that create a great whipping action. I needed a whisk that I could use in non-stick pot. This whisk is actually fun to use. The flat bottom enables you to reach into the "corners" of the pan or pot. This whisk is worth every penny. With such an attractive design, it would make a very nice gift, too!", "This nifty item is just what I was looking for homemade sauces as my mac and cheese sauce requires a lot of mixing in order for it not to clump, and this does the job beautifully. It gets right to the side of the pan and in the corners without a problem.", "I was skeptical about really \"needing\" another whisk... but this purchase has been a great addition to my well equipped kitchen.Making gravy, white sauce, or anything else that needs to be evenly stirred is almost effortless. It gets all the way to the edges of the pot or pan, \"scrapes\" the bottom, and covers a lot of surface area in one turn.", "Bought this for my mom, it works great. It froths up eggs and mixes other loose batters. She hasn't tried it on thick batters so not sure it will work on them.", "Excellent for making Mexican hot chocolate and whisking ingredients for Coca Cola Frosting! !I LOVE IT!! Highly recommend!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !", "I like that the tiny bits of flour in the corners are swept up with the unique shape. I dislike that the unique shape makes it very difficult to store in a drawer. It is worth the inconvenience, though.", "This whisk is great for making sauces and gravies. I made cheese sauce last night in less than 10 minutes. The flat base really helps to incorporate all of the ingredients.", "Like the others say, it really gets into the corners. I don't see it as flimsy and it has tackled every job well so far. Unlike other whisks, I don't end up with any flour in the corners. This think really works and cleans up in seconds. Nothing sticks to it!I love the colors and think it brightens up my stash of mostly black or stainless steel kitchen tools. So if the size isn't too large for your needs, I highly recommend buying this whisk."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,389
Honestly they're totally fine. I've used it about a dozen times since I got it in May and even with the unfolding and refolding, we never notice it once the movie is playing. Its a really amazing product. The only bad thing is that my husband broke the zipper on the bag the first time we used it but it has two, so its not a big deal. I highly recommend buying it though!
{"question": "Does the folds come out rather easy? Seeing it is a large screen that has to be folded to fit in the carrying and storage bag.", "document": ["Great Product for a good price. Setup easy and storage bag large enough to put back in after done..", "We have used once but it was a huge hit. Relatively easy to set up and we were surprised at how great the picture was. Packed very neatly in its custom bag for storage. We look forward to using for many more events in the future.", "The screen was easy to set up and the fans were quite. It is big and tall but not overwhelming. It only took two people to set it up. The wrinkles in the screen are not seen once it is dark and the movie is playing. It's been used three times in the past two weeks with no problems. I would recommend you place a large tarp under the screen. The trap will protect the screen from the grass/dirt/damp/rocks. It's perfect for our backyard movie nights.", "Perfectly large enough for a backyard viewing party for up to 10 people. We use it for our community movie nights in a larger park setting and it works fine there too. Really easy to set up for 1 person, but with 2 people its a snap. The frame inflates in no time. Breakdown can be some by one person, but if you want to keep it tidy 2 people are better. One one each side of the screen to unclip & fold it up nicely.", "I'm looking at a great summer coming up!!PS. As a previous commenter stated; when putting the screen in the bag put the blowers in the bag first!! Much Easier that way!! !", "Compact to store. Reasonably easy to assemble and take down. Fans are fairly quiet and the screen is of good quality. Good product at any price, great product for the price I paid.", "We originally were watching movies outside on a white bed sheet hung on the back of the house and then I saw this big inflatable screen and ordered it. We just love it!!! Easy set-up and take down.My kids just love when it is movie night, their friends, our neighbors and family love it.Much easier set-up then duct taping a sheet to the back of the house.", "The movie screen was easy to assemble and operate. The screen size and quality were great for an outdoor screen. Our only complaint was the noise from the air blower was too much on the enclosed porch where we were using it, so we ended up tacking a sheet to the wall. The picture was much better on the screen, but at least we could hear the movie. I would recommend it for anyone using it in an open outdoor area.", "We ordered this screen so that we could have outdoor movie nights in our backyard, and it has delivered! Putting it up is super easy, I can even let my 8 and 13 year-olds set the whole thing up on their own. It has stood up well on breezy nights, though we haven't really battle tested it in windier conditions yet...I was concerned that the fans would be noisy, but once the sound from the movie gets going, we don't even notice the fans anymore.", "Low cost2. Quality construction.3. Huge WOW factor.4. Screen shows the movie very well.5. Easy set-up once you get the hang of it.Cons:1. Takes two people to setup and tear down.2. Gotta have a yard for the tie downs.3. Wind will blow thisthing into your neighbors yard or at least double it over.4. Needs lots of space for screen and tie-downs.I highly recommend this great family fun!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,390
People who had problems say EVGA was overnighting them updated units. Looks like they fixed compatibility issues about 6 months ago. You can return in to Amazon for free if you have problems, so no risk
{"question": "Does this power supply still have the same problems with the Gigabyte MOBO?", "document": ["Works fine so far. I was worried when it wouldn't power on at first because I have a Gigabyte MOBO that this power supply is known to have an issue with. I plugged my old power supply back in and it powered right up; it made my heart sink. I disconnected everything and plugged it all back in again; turns out it must have been a fluke, because it powered right up on the second try. I've had it for a week and no issues yet.", "I bought this power supply a month ago from another seller (which was $20 cheaper at the time) and was very pleased by the build quality of the PSU and included black and red sleeved cables.I was then disappointed when I found I had the same problem as many reviews have stated about the compatibility issue between these PSUs and MSI and Gigabyte Z87 boards.", "If you get one of the original units, it will only power on and off repeatedly with the new Haswell chipsets. I registered the unit with EVGA, called them to setup an RMA wihch they agreed to saying that its a known issue and did an advanced replacement RMA with next day air shipping, but am still waiting for them to actually ship the unit.Update:Two days later, my power supply still hasn't shipped from EVGA.", "I purchased mine \"Used/Like New\" direct from seller EVGA here on Amazon and it was in perfect condition (just open box) and I saved a bunch off of the retail price. The day I have any problems, I will be here to report back. Otherwise, everything is still going great.", "Serial numbers ending in over 2015 work fine on Gigabyte now and on my GA-Z77X-D3H. The Serial Number was in the 3 thousands, so no issues. My thoughts:Supply itself works great and is very quiet. Modular design is very nice and works well.", "Consider to buy one of this if your planning to change because of GPU consumption.It is a high-level power supply. 5 stars!!!!!! !", "This power supply is very good.above all it is totally modular and very easy to install.Adema to have a very good price as it is a 80PLUS GOLD. Very quiet, if you buy this power supply do not hesitate.", "If your looking for a power supply that will give you sufficient amount of energy for one high end graphic card, one with a handlebar, and modular, look no further. This is it baby!! !", "Calling EVGA they were more concerned with who said they would next day air it instead of if they were going to. In the end, they said they wouldn't, and it would be about another week for me to get the replacement power supply.", "pros: 80 plus gold, quiet, 10 year warranty - it's the longest warranty I found when I bought the power supply. Unfortunately, UltraPower doesn't provide lifetime anymorecons: none yet"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,408
Yes, the adapter works just great. It covers a wide range of Mazda models that all used the same wiring harness.
{"question": "Can i use this to install a after market single din kenwood head unit in my 2008 mazda 3 hatchback?", "document": ["What more can I say, it was simple and straight forward to install in my Mazda 3 with my Kenwood stereo.", "I had to buy this because the aftermarket head unit I bought (Kenwood KDC-352U) was supposed to fit, but apparently only fits the premium Bose system, and I couldn't find the right harness in stores. The wires were pre-cut for stripping so all I needed were some crimp connectors and some time. Works great!", "Made the install of my new head unit go smoothly and gives the option to disconnect and replace the stock unit if I decide to do that. No complaints.", "This radio wiring harness worked perfectly for replacing the head unit in my 2001 Mazda Miata. I recommend this product.", "Worked perfectly for an '02 Protege. Connect harness to factory mazda clip and connect the corresponding colored wires from your head unit. Its that simple.", "Used the Metra 7903 to install a Kenwood stereo in my wife's 2003 Mazda Miata. It makes the install very easy especially if you don't do it everyday. Worked like a charm.", "If you're replacing the factory stereo in a Mazda 3 (should work with 2004 to 2009 I think) this is the right item to buy. Pair it with a PAC SWI-PS to make the factory steering wheel buttons work, a Pioneer AVIC nav and aMazda 3 Install Kitor something similar and you've got a great setup. I pulled the unused power antenna control wires and used them to interface with the PAC SWI-PS.", "Worked for a Pioneer single din replacement for the factory player. Wiring labels were on the bag, but I made sure and matched everything up online as well. Everything seemed accurate and it worked the way it was supposed to.", "Perfect product unless:You are installing an after-market steering wheel control kit (Axxess ASWC-1 in my case) and want to keep any changes to the after-market side of the install. I had to tap into the car side because the 2 pins I needed were missing. Everything else was good except I ended up with a wire that was listed as 'illumation' on the Metra harness and as 'Dimmer' on the after-market stereo harness.", "This is just what i needed for my new Kenwood KDC-152 install. I went all out and soldered the wires together and used shrink tubing. Very happy with my purchase."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,418
Yes, it has a wavy cut blade. It works great, makes fancy slices.
{"question": "wavy cut blade", "document": ["I had a small version of salad shooter, it was great, used it for so many years, but now the blade was dull, and I kind have to push the veggy into the machine to be cut them. I decided the next salad shooter I buy should be slightly larger.", "After slicing/shredding there are large chunks of the vegetable left between the inner chamber and the slicing blade. There are also various grooves and cut-outs where food get stuck and that have to be cleaned out if you don't want to waste food. I'm really not as excited as I had been when I ordered it. It's also extremely noisy and I'm contemplating returning it.", "It says "professional". So, I decided to give it a shot. One of my key requirements is to cut & slice a lot of celery and cucumbers. The machine did a wonderful job of shredding carrots and cheese. However, it will do very poorly with celery. The outer skin of celery will be peeled off by the rotating blade and the skin gets stuck, instead of slicing it.", "I recently purchased this SaladShooter and I can't believe I've gone this long without it! In the past I've chopped all my vegetables by hand, which took loads of extra time. This weekend I used the crinkle cut blade to slice carrots and it worked beautifully. Clean up was a snap! A great time-saver addition to any kitchen.", "Amazing! This gadget worked SO GREAT! I cut the large beet into 3 long chunks and sliced up enough beet chips for a party in less than a minute. Can't wait to try it on other fruits/veggies to make healthy, homemade snacks.The slicer/grater blade holder turns and comes off so easily. I just rinsed mine under warm water with a drop of dish soap. Came clean without any scrubbing.", "If I hadn't already been using a full food processor to prepare salads, I might have liked this. It DOES make nice "wavy cut" cucumbers (as my grand kids call them). And it DOES a great job of grating raw cauliflower (the output looks just like white cheese gratings. )BUT, it also mangles salad onions, and takes way longer to do things than does the food processor.", "Fast shipment,works great!whish it had a diceing blade,altho shredding works *L*", "The shredder does a great job. Although it works well, it did not have blade that I needed. I had order it separately. I would recommend this to anyone planning to have more salads. It does a great job.", "This item is okay, but it really doesn't slice vegetables very well at all. It mashes most vegetables instead of slicing them. I went through the book twice and I am using the right blade cone, but I'm not very impressed with this item.", "Secondly, I tried to slice cucumbers. The sliced piece is not in round shape. But it is rather an oval shape since the cucumber has to be pushed down and the cucumber is inevitably stretched by fast rotating blade. This machine is not for me!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,425
from floor to tallest point (side bar) is 70.5"
{"question": "How tall is it?", "document": ["I bought a few of these since Europeans don't believe in closets. They're incredibly sturdy and are tall enough to keep my dresses from dragging.", "Its a little tall for my needs but other then that its strong and sturdy.It also shipped earlier then expected.0verall I give it very good product and service. Thank you.", "The garment rack was shipped as expected and arrived on time. The quality was as expected and described in the description. It was easy to assemble and came with the special tool required for the wheels. Its very tall, I'm 6 feet tall and its taller than me and none of my long dresses are touching the floor. Love; love this rack. Bestpurchase ever!", "this rack was exactly what we needed for all our clothes. it is very strong and very durable, it was also at an affordable price. great rack!", "this is a very good product is that good that i want another ZGarmet Rack Commercial Grade send me one more", "omg ,I love this rack ,it is so stable and you can fit in so much almost my full closet .I think it is worth more then I paid for ...", "it took me 20 minutes to put together very easy by just looking at the picture tools included. If I had known this product exist it would have made my life a little easier. you could put a few hundred pounds of clothing with no problem", "easy to assemble and very heavy duty..I purchased two and would highly recommend for any one who needs a heavy duty rack", "does the job well! Exactly what we expected, Easy to assemble, Fun to use. Would highly reccomend this garment rack.", "awsomely heavy duty a little larger than i expected but a great item at a great price!! will last a lifetime. easy assembly with included tools!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,449
You tune it to an unused radio frequency, and the music on your device plays through the car speakers.
{"question": "Would this work to play through the radio/car speakers? Or does it just charge it and allow you to play the music from the MP3 player's speakers?", "document": ["For what it is I'd say it's worth checking it out if you're not looking to spend a lot of cash in your older car for a new stereo but still want to play you MP3 player over the speakers. The hardest part is finding a dead channel to broadcast it on since radio is so saturated now.", "This is a great way to play music with a mp3 player or phone in you car if you don't have a radio that supports a mp3 player. Make sure you tune your radio to a no broadcast station to hear your music otherwise it wont work/ didn't work for me in my truck. This adapter worked with my old zune mp3 player from 2008 /2009 w/o a problem in case anyone is wondering if they need a app to use it.", "I think it fits the bill perfectly. It does exactly as it describes. It transfer music or recordings from your mps player, ipad, phone, etc. to your car speakers. Pick a channel that works and out comes the sound. Easy to use with little to no set up. Perfect for those of us that have a car in the collection that pre-dates MP3 audio insert on the dashboard.", "I wanted to listen to eBooks through my car stereo speakers. This allows me to do that. My phone does read the transmitter as a headset rather than headphone, so I needed to install an app to keep the phone from making random calls and skipping chapters, but once I figured that out, I could read happily with my ears in the car! It may not work as well for listening to music if you need super high quality, but it works well for my purposes.", "There isn't anything on the radio but commercials. With this I can listen to my music from Spotify. You have to make sure to link up the station to the digital read out in order for it to work. Play around with the stations to find a nonstatic frequency. Really enjoying it.", "I thought this was an ok product at first. It had a good range of stations to choose from, so no matter where you are, you could find a useable station. I did find that this product would occasionally cause an annoying buzzing or humming sound to emit through the car speakers while the music was playing and while no music was playing. I could usually unplug it and plug it back in to fix it, though.", "It must have arrived DoA or something, because it just straight up didn't work. I tried it with my phone, with my MP3 player and got nothing but a very quiet hum through the channel where there was supposed to be music.", "Pros:The signal is strong and reliable.I like the USB charger built in, allowing you to charge your device at the same time.Con:The signal shuts off if no music is being sent from the mp3 player for 30-60 seconds. This is quite annoying - you pause your music to take a call, then after 30-60 seconds the transmitter shuts off leaving you with loud static/interference blaring from the speakers.", "I have a 2003 Honda Accord & it does not have the luxury of having a auxiliary jack available in the stereo dash. So after purchasing different FM transmitters I finally ran across one that not only plugs into my iPod, it also plugs into my smartphone! Find a free radio station, plug into your MP3 player of choice, cruise and jam! Simple & plain. It also has a USB port to charge your device but you must supply your own cable.", "I have a friend who has a similar product and he showed it to me and I thought that was cool beings I have a older car that doesn't have that .Hooked it up and works GREAT and also you can get phone calls though your car speakers which is quite helpful with the Laws in my State you can't use a cell while driving and it solves that problem. I would recommend this product to anyone THANX AMAZON : ) !! Very Happy"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,475
the website CNET had a great comparison and critique. I can't remember what they said specifically but the comparison answered my question about the differences.
{"question": "wha is the difference between the s4200 to this camera. by compact is it much smaller than the other?", "document": ["Easy to use, nice features. I've been using it regularly for over 2 years now and have not had any issues thus far. My last camera compact camera was a canon, and the only difference is that it had a display that flipped open, and you could swivel it around, up and down, which is a great for selfies. But it cost around $200 more then this one. It still works too, but the MP's on this one are much higher.", "I have owned a number of different digital cameras, including some that cost over three times the cost of this one, and I haven't seen a better ELVF anywhere. The 30X lens is a great range. I wouldn't go bigger than 30X and smaller could be okay but 30X is just right, as Goldilocks said. The camera only has two aperture settings but that makes no difference at all. The camera adjusts the shutter speed to give correct exposure at whichever aperture setting is in use.", "More than satisfies the needs of the lab. Easy to use and learn. The computer cable is compatable with the smaller Fujifilm camera that we have", "Nearest shopping area is 60 miles away.Fujifilm S4500 Compact Digital Camera", "Fujifilm S4500 Compact Digital Camera, is very good item. Thank you. Be detailed and specific. What would you have wanted to know before you purchased the product?", "Perfect size, abundant features, easy to use. What more could you ask for in a compact camera.I reccomend this camera for anyone looking for a point and shoot with more capability and control than the pocket point and shoot category.", "This camera takes really good pictures in my opinion. I'm not a professional but my brother has shown me photos that he's taken with his $400 Nikon and I can't tell the difference. Not to mention I got mine for about $135 which is hard to beat. So if your looking for good quality pictures and a good price, look no further.", "One of my new passions is the photography and this is my first super compact camera. I'm very happy with my purchase, because this model has a lot of features and configurations that gives me the possibility of practice my techniques and concepts that I've learned in a recent course of photography.", "This Fujifilm S4500 Compact Digital camera is quite exceptional....especially for the price. It will take a while to learn to use all the cool features, but in the meantime, I can snap off high quality shots in "Auto" mode. I hope it lasts a long long time, cuz I love it!", "The Fujifilm Finepix S4500 is a great camera. Previously, I owned a Fujifilm Finepix s2000HD and it took a fall from which it didn't recover (although it did recover from many other falls).. I bought this one simply to replace the old model. Well, this has twice the zoom and 4MP more resolution! The zoom is incredible. The pictures are great.. stunning at times! There happens to be one difference with this model which I'm not happy with."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,515
for the surface two it is free forever .not so on the surface pro. is there is no annual subscription fee.
{"question": "Is MS Office (Outlook, Word, and Access) Permanently free? In other words, is there a yearly fee for MS office as with the IPAD or other tablets?", "document": ["I have had my 64GB Surface 2 with type cover for a few weeks and I LOVE IT! I used my laptop primarily for work using MS Office products, email, and web access as my main functions. This Surface 2 will do all that and give me much of the functionality of my Windows smart phone in one place. It is very lightweight, very easy to use, nice size for work and personal use.", "(One drawback is that there is no way to charge the keyboard separately while carrying the tablet around. The keyboard has to be attached to the tablet in order to charge. )Included with the tablet is a full version of Office 2013 including Word, Excel, PowerPoint, Outlook, and OneNote. This allows you to do "real work" if your work involves using any of these applications.", "That's 2 of the things most people want from a tablet right there.And there is something new to Windows RT 8.1, you now get Outlook, the full featured version not just the Mail app, included for \"free.\" This is a bonus as not all business based email systems wanted to work well with the Mail App.Something else that is included, so in theory a $220 value added to the Surface, is Office 2013 Home and Business.", "If I could give my tablet six stars, I would. This is my first tablet purchase, after weeks of researching this particular one. The limitations of the RT operating system is to be expected, so no complaints; the tablet does what I need it to do, and that's important to me. The free bundles of MS Office and unlimited Skype calls are a refreshing bonus. Won't get into the tech details, but it is a powerhouse by comparison.", "This is awesome. No other tablet has anything comparable. Fully functional versions of Excel, Word, Outlook, Powerpoint, and Onenote.3) A micro SD slot for expansion of primary storage. Up to 64gb additional storage. Ipads don't have this, and with androids some do and some don't. Very useful and welcome.4) A mini HD port, so you can output the display directly to a tv or monitor.", "You don’t need stupid Apps. The websites just work.-Both keyboards are a great addition-Battery life is very good-RT is compatible with Smart Card readers and DoD Common Access card PKI software.-Skydrive integration with 200 gig free for 2 yeas-MicroSD Card reader-Integration with Windows 8 PCsCons-Microsoft’s poor marketing and the biased reviews who try to tell people RT should run x86.", "It's incredibly nice to have your email open right next to Facebook, or your browser right next to MS Word. It just makes things so much faster and more fluid. That being said, not all apps seem to take kindly to this yet, and it takes a little while to get a feel for the maximum amount you can change the proportion between apps before one of the leaves the screen by accident.", "Forget about any other cloud drives, they are not supported at all and are difficult to use on Surface. I like Sky Drive and they give you 7 gb free forever. If you are considering this tablet, you NEED to love and use Skydiver. (The spell checker will not allow you put sky and drive together in one word. )The camera app does not support document scanning or making deposits with banking apps. The fixed lens focus is set too far away so documents are too blurry.", "Don't get me wrong, some apps just don't have a website equivalent, and thus you won't get to play with it. Period. But for the most part, the major things you want can be access through IE. On the flip side, you do have some things that other platforms don't have, such as Halo: Spartan Assault, the aforementioned Office suite, and some killer tools like great integration of Xbox 360 and Skydrive services.", "I was struggling between Surface 2 and Surface Pro 2 and finally pulled the trigger on Surface 2. My initial reason for choosing the Surface 2 was price. I knew I wanted a Windows device but paying north of $1,200 for Surface 2 Pro with 128GB and keyboard was too risky. What if didn't like it? What if it ended up collecting dust?For my needs, Surface 2 is perfect. This device comes preinstalled with a \"touch enabled\" Microsoft Office which includes Outlook."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,538
I Think That Is What Melted Mine...
{"question": "Will this charge other devices reliably while plugged in?", "document": ["Would not recommend at all.1) I got the product, turned it on and it appeared to function. I then immediately plugged it in, per the instructions, It never worked again. Would not turn on. Would not charge any devices. Nothing.2) The instructions are terrible. Clearly were written in another language and were attempted to be translated to English. Many things were lost in the translation.3) The website gives absolutely no information.", "Originally it had worked quite well, then it simply stopped charging. Even after three days plugged in to charge, it dies within ~10 seconds. Rather useless device now.", "I bought 2 of these for Christmas presents and they both work the same. They both hold a charge, both charged quickly and fully and both quickly charged the cell phones that were plugged into them. I chose these because of the high reviews. I am pleased.", "At times, pressing the charge indicator would have you believe the battery was dead (no L.E.D.s light up) but, as soon as I plugged the battery pack into any charger (wall block or USB port on computer), the charge indicator immediately indicates the battery is fully charged.", "I plugged the charger into the wall and my phone into it and it did not charge the phone while plugged into the wall. Possibly it warned against that in the manual but I'll be dammed if I read an owners manual for a battery. The standard USB port that you use to charge the phone is melted. This was likely caused from me plugging the battery to the wall and my phone to the charger at the same time.", "When I turned on the pack, it looked as though it still had roughly half its charge. I plugged the tablet back in and successfully brought the tablet up to 100% charge.The pack comes with a 1-amp output and a 2.1-amp output, the former for a phone and the latter for a tablet. The charging input for the battery pack is only 1-amp, though.", "This product worked fine for about 3 weeks of pretty light usage. Now something is apparently broken inside it, causing it to no longer charge when plugged in. With the battery depleted and no way to recharge it, the product is useless. I would like to note that unlike any of the positive reviewers, I was not provided this product for free by the manufacturer, but was conned by those hired spokespersons into purchasing a $30 paperweight.", "This was one of the cheapest (price-wise) small sized 2200maH chargers I could find so I figured, "Why not give it a shot?" After receiving the product, I believe it was dead on arrival. The battery lights up as if charging when plugged in but after a full charge, nothing happens I plug in my smartphone. Moreover, the LED light doesn't turn on either so I suspect it's defective.", "Bought this one cause sick and tired of my nexus 5 battery (maybe playing too much heh)Nexus battery is 2300mAh. This thing charges up to 70%. Well, I was ok with that.Yesterday I tried to charge my phone -- and nothing happened. I plugged the charger in USB, and it have been flashing 3rd light for like a day. Whatever I try to plug it out of USB and plug in phone, it do not work.So don't buy this crap.", "For the price ($12) you can't beat it. Indicator lights show you when the battery is off and at what level the battery is at. Small enough to place in your pocket and has the ability to charge multiple devices."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,552
23 1/2 inches
{"question": "What is the height?", "document": ["I really like these tables ..They are cheap but I like the size and the height is wonderful...They will serve my purpose for just eating in front of the TV.", "I've been looking for this type of TV tray for a while, but so many styles are heavy, or have a cross piece between the legs that restrict leg movement. As a senior citizen with back and knee problems, I find these trays to be very light and easy to move around. The top is very roomy and a good height for eating and working at my laptop, which are the main things I use them for.", "My husband and I are very satisfied with the set of two, honey-colored TV trays that I ordered recently. They both sit level, are a comfortable height, and the tray top has a nice finish and is ample in size; plus it has a slight lip around the edge that keeps things from rolling off. It is lightweight, so easy to move about; but we haven't had a problem with tipping. Perfect for anyone looking for a simple, economical TV tray.", "I want to be able to stretch my legs underneath the table so these tables allow you to stretch your legs. Its almost impossible to find these tables with out that cross piece at the bottom of the leg. I'm glad I found these. The table is nice in sturdy .They don't tell you the height of the table . The table is 24 inches from the floor to the top of the table. The table top is 21 inches wide by 15 inches depth.I would buy more of these tables.", "was very disappointed in the quality of this table. It is very cheaply made with low quality materials. The \"laminated\" top consists of extremely thin Masonite with wood grain printed on the top.", "tv trays were what we have looked for several years were a good price and received at our front door sooner than expected", "they work just as you would imagine- light weight, easy to fold and lift and set up. because they are light and top heavy, they could be easily knocked over (by one's dogs, for instance). I don't put a wine glass on them. but the easy lightness was their main appeal.", "there is not much you can say about a tv tray. These are just fine for our nightly tv watching. Shipment was quite fast, and I ordered more than I needed, but will put the extras away for later.", "tables are very flimsy, therefore you don't want to trust it to let the kids eat off of them. feels like any little thing could knock it over.", "loved this .may me think of the old dayseating meals in front of the TV watching a big game"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,562
No, you can have multiple units. Assuming that the main network source is in the main office, you would need to set the one at the main office up as an access point and the 3 remotes as a bridge. The remotes must have line-of-site access to the main office and the main office unit would need to be pointed in the direction of the remotes. If the main unit is not pointed in the direction of all remotes, then another unit may have to be installed as an access point at the main office and pointed to connect to those remotes not covered by the first one.
{"question": "Do these only work in pairs? For instance, to connect 3 buildings to the main office, I'd need 3 for the main office and 1 for each of the 3 remotes.", "document": ["The WiFi access points are directional but with a wide spread/view - almost 180 degrees horizontal with some limited signal distance on the backside of the units - about 50 feet in our case. The WiFi access point signal is useable after passing through several walls (3 drywall + 1 concrete block). In Bridge mode, the signal passes through a chain-link fence with no problem.", "After several frustrating months with a competing product (A. Wless' Access Point and Smart Repeater), I purchased two of these to bring Internet to a remote cabin about 3000 feet from a house with broadband Internet. The units cost less than the competition and have worked flawlessly for a week now. There have been no annoying drops or the need to reset the units. My application spans about 3000 feet that has a few overhanging branches, crossing a main road and a railroad line.", "I bought a pair of these and set them up to share internet from a friends house 1/2 mile away in line of sight. I can get 40 mbs of internet across there! Very easy to set up, actually aimed them in the dark and never adjusted them. Plugged them in, tweaked a few settings and have been working perfectly since. Not only that, but if you need tech support you can actually talk to someone who speaks English! Great company.", "They work great in pairs with line of sight. Not great at penetrating walls. Use one as AP and the other in bridge mode with DLink DAP-2553. Speed is excellent and has worked flawlessly for the past 2 months.", "Range is ok the way they said it will go about 1KM. but its work great from close range I do have 3 of them and works great.", "This device is supposed to connect offices or remote billboards over 1 km point-to-point connection, but it does several different things:Access Point connected to Router/NetClient Bridge remote (IP Based)WDS Access PointWDS Bridge Mode MAC Based NetworkThe device ships with a 1 page setup page that gives some documentation clues, but most of the documentation is on a mini-CD that requires an old-fashioned spindle drive.", "One unit is set up as an \"Access Point\". This is your \"base\" unit.3. The other unit is set up as a \"Client Bridge\". This is your \"remote\" unit. (We plugged this into an 8 port Switch at the remote location, into which we connected some Allworx VoIP phones, desktop PCs and several local wireless access points. The Allworx VoIP phones work well through this bridge. However, the Allworx control box setup was done by professional techs.", "Good Durable Product. Depending on you IT skill level, easy or not so to install.We have installed several pairs of the Engenius ENH202 units for use as wireless bridges and several units as WiFi access points. In the bridge mode, these inexpensive units are communicating well over a 1/2 mile distance, supporting several remote Allworx VoIP phones, a hardwired local network and several separate remote WiFi wireless access points. The units are outdoor, mounted on rooftop posts, utilizing the internal antennas.", "I have this for about 9 month or so, the reason for this was to boost RANGE from one end of the house to the other house directly next to each other with about 50 feet air space. The range is spotty from time to time. It claims range of up to 1 mile without obstacle. It won't work in the real world. It does a decent job when signal is strong. We're not sure why the signal drops from time to time.", "I've read a lower RSSI is better and anything under -65 is considered a strong signal. The LAN gets about 70mbps, so I expected these to get at least that much speed or very close to it. I have tried reading the forums and used every setting available but that was the best speed I could get.Bottom line: These are great and they are very stable. If you can deal with your wireless speeds being about 1/3rd the speed of your LAN, they work perfect."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,565
+1 on Ryan's post.I just recently bought this sx110is camera, and when I was shopping for my new digital camera my very first criteria was AA batteries.It goes without saying that having a universally available power suppy while traveling is indispensible. It's so easy to forget to charge proprietary batteries - and that's if you remembered to bring the charger.Even at home, I never want to have the day come that I want to capture a moment but can't, because I forgot to charge the battery pack.It's true that you'll get more shots per charge on a proprietary battery pack, but when you can get several hundred from a set of AA's, what else do you need?The one downfall of the 2xAA's in this canon is a long flash recharge time (during which you cannot take any pictures, flash or not) - around 5 seconds if you use the highest of 3 flash settings (flash recharge is pretty quick on the medium or low flash settings). If you're going to be at an engagement where you're going to want quicker turnaround (wedding/whatever) you can always buy Lithium AA's - expensive, but great performance.Also consider that a typical lithium battery pack will only last around 5 years. It's the nature of lithiums. Plus, if you care, niMH is better for the environment than lithium...
{"question": "batteries I am interested in this camera and the A590 but am a bit turned off with the idea of using AA batteries. Can anyone, who has used both AA batteries and the battery packs, tell me what are the advantages/disadvantages and which they recommend? Im going on a trip and want to get a new camera so Im trying to pick something convenient for travel. Also I will be travelling out of the country (already got a converter set). Any advice would be appreciated!", "document": ["Suggest you look at some of the other highly rated models. Do not pick this one if you can only get the version that uses AA batteries. We could not get through a single day of moderate use without going through 4 or even 6 new batteries. The camera works fine and the quality of the pictures is good. If you are just interested in something to shoot some pix with, there may be too many bells and whistles on this for you.", "This is a great purchase. You definitely need to purchase a photo card with more space. I also kept extra AA batteries with me in case, but used the camera for a 2 wk trip & never needed to replace them. The only other thing I would recommend is to find a screen protector, even in the case, mine is now a bit scratched. But I love the large screen, the video footage with sound, the zoom & everything else about this camera.", "I take my movies on Standard mode 640x480 30fps. By using that you'll get the clarity of almost HD movies. Oh, I use rechargeable Ni-MH AA batteries. I was in Denver, CO for three days last month and took 150 photos and three movies on one set of rechargeable AAs, and they still had juice in them when I got home. I also use a 16GB memory so I'll won't run out, but I do carry a 4GB SanDick ExtremeIII memory card as backup.", "Canon Powershot SX110IS 9MP Digital Camera with 10x Optical Image Stabilized Zoom (Black)I took this camera on a 5 week travel trip across the US and got the most amazing photographs; even a professional photographer was impressed with the clarity, especially when we practiced \"drive by\" photography while speeding down the highway at 70mph. The only drawback is there is no view finder, so after trying to look through the flash attachment a couple of times, I figured out that wasn't going to work.", "I really love this camera, i've had it for awhile now, 8 months. First my negatives are that the Flash is super slow, and trying to take sport shots is horrible. That might be user error though. I was scared to get a camera that uses double AA, but I got energizer batteries and i take millions of pictures and my camera never dies. On a recent week long trip to cali i took atleast 200 pics and never had to charge my batteries.", "This is the best camera I have ever owned! The pictures are crystal clear, and I never get a fuzzy picture. I have two small children and I can set the camera to the kids and pets setting and get great quick shots of them. We just took it to the snow and got great shots of the kids, and great video as well! I would recommend this camera to anyone and everyone!", "Macro shooting is amazing. You can practically touch the subject with the lens and get a clear, very detailed shot!If you want a quick convenient camera for casual shooting, don't really care about too much zoom, don't get this camera. Get something smaller and faster, and something that comes with a rechargeable lithium battery. I would stick to Nikons, Sonys and Canons. This one takes two AA's, and dealing with those has its pros and cons.", "Both a good and a bad thing, although mostly good since you can change batteries when in the field or find extras at a local shop.+Direct-Print to printer with a USB cable (I've never used this, but could be useful and convenient for some)Cons:-Okay battery life. Battery can be used quickly when using the flash a lot or using optical zoom often. Setting the LCD brightness down can help. I bought High-Capacity rechargeable AA batteries and these helped a lot.", "Runs for about 2 weeks (used almost every day) on 2 AA rechargeable NiMH batteries from Energizer. I use an 8gb SDHC card from SanDisk and love it. My only gripe is that when it came new in box there was a screw missing from the back of the camera. Nothing that would be a show stopper, I just can't believe Canon would miss something like that. (Which is why I use Nikon DSLR's. :) That was in jest for those of you Nikon haters.)", "ISO greater than 200 is pointless as photos will be overcome by noise. If all you plan to do is have people hold still while you take a picture from less than seven feet, then you'll be fine. If you are trying to get action shots indoors, forget about it.This camera will gobble batteries faster than a pig runs to slops. You'll be lucky to get fifty pictures out of a new set of alkaline batteries."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,567
Holly, After I bought one of these units, I searched all over the place, including talking to someone at 3M and the answer I got was that they made a remote for this unit, but it is no longer available. I have not been able to find one after an extensive search on Amazon, EBay, and several dozen tech equipment places, including several that are authorized 3M dealers. If you find 2, I'd love to get one! :) I have used it hooked up to a laptop (and that was an adventure as well!) and use a standard laptop remote I got from Office Depot.
{"question": "Hello - do you sell a remote with this projector?", "document": ["The projector met and exceeded every expectation I had in terms of power and portability. My sole disappointment is that a remote is no longer available. You must manually operate the projector. This causes shake and decreases effectiveness of "instructor mobility."", "The projector does exactly what I wanted, great picture quality which actually will project larger images than advertized. Sad 3M decided to stop making them. One negative, not about the projector but the fact the 3M makes it appear the remote is available and it is not.", "This would have been a great little projector for my business, but nobody is telling you that the proprietary accessories (remote and VGA connector) are unavailable, and I mean ANYWHERE!! !I was able to load my PowerPoint presentation, but advancing the slides by using the touch button on the top is not an option for me.", "i love the projector however it does not come with accessories and i was not able to find them in local stores. I had to order them online. once i got them everything was great but it was a pain trying to find the right ones. right now i need a remote and i would like to be able to get it at a store but....online I go.", "I suppose this is a nifty enough device, but without the necessary cables and remote controller, it has very limited utility. If you could buy the cables or remote somewhere, it would probably still be a pretty good bargain, but you cannot find them ANYWHERE ON THE PLANET.If you are seeking a little projector for showing a presentation from your laptop to a room full of people, this isn't what you want.", "It is advertised to be 2 GB, while what I see is 765 MB. In any case, if you want to present rich content locally, it is recommended to purchase a larger micro-SD card (up to 32GB is supposed to be supported).Also, if you intend to run local presentations, I would recommend purchasing the remote control. Without it, you need to touch the projector whenever you want to go to the next slide.A tripod is a must.", "Mostly I am very happy with this. Buying the remote is critical if doing a presentation.", "limited capabilities when running local presentations- limited video formats when running locallyAdditional considerations:- definitely purchase a tripod (or use one you have…)- a remote control is useful when running locally- additional cable is needed to run from other video sources (such as PC)", "I finally let the battery die down and when I recharged it and powered it back up, it was fine. I've only had it a few weeks and need time to address all the issues. There is no manual that comes with it, and again as far as I can tell, you need to call the company in order to get one. Same goes for a remote. You need a tripod stand and you can get that with no problem.", "and because the remote was sold separately, it was no longer available. a specific connector cable was also no longer available. nice little unit, and i really liked that you can preload your presentation on it and leave the laptop at the office...but without the remote you would have to use the control buttons on the unit, which makes for a crummy presentation.I ended up returning it and getting the MP410."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,578
Yes! In fact I plan to buy a second set for my home, as soon as i decide if I want a non-stick induction set or just go with the same as I put in the RV. I was truly imprEssex by the quality...
{"question": "Do you consider this set high enough quality for use solely in your home kitchen?", "document": ["I bought these for use on our sailboat. Loved the nesting capability so to save space. Was very impressed with the quality of these and I would even consider using them at home as well if I had space issues. I haven't had them very long but I don't see any problems with them lasting.", "This set of cookware is a great buy! Takes up little space and is of excellent quality stainless steel. Perfect for our motorhome. Would be a great addition to any home kitchen also.", "I bought this set for our *home* kitchen almost two years ago, and I have to say, they've wildly exceeded my expectations.My husband and I rarely eat out and I cook everything from scratch, so these pots get a lot of mileage. I'm not exactly gentle on them and probably do all kinds of things that aren't officially recommended: I use them on the stovetop, in our regular oven, under the broiler, in our countertop convection oven, and as food storage in the refrigerator.", "We bought this set of Magma cookware for use in our RV to replace a hodgepodge of residential type pots and pans which were simply too big for our little 3 burner propane stone. We absolutely love the sizes, nestability, and high quality contraction. We're now huge fans!", "This is a great compact stowable cookware set. All the high quality stainless pots you need in slightly more than 1 cubic foot of space. Perfect for our RV. Would be great for a boat, too.", "I can see why people buy them for their RVs, but I just use them in my kitchen.I am seriously considering buying a second set, because they are just that great.", "Received a set of dishes. Very pleased. The quality is excellent. assembled a small footprint, which is important for a small kitchen.", "This is a really nice pot and pan set. I use it in my rafting kitchen box. They are heavy and hold heat well. Easily cleaned. The two handles WILL fit under the top lid. It would be nice to have these in a drawstring bag but a friend is going to make one for me. I also ordered a diffuser plate which works well when the pots are used on the blaster type Partner Steel stove. This is great stuff....highly recommended.", "My daughter went to culinary school and I wanted to get her a gift after she lost all her stuff and had to start over. This looked like a good set that would be perfect for a small kitchen with limited storage. So far it is a big hit. Great quality and minimal space needed. She is very excited to have these", "When I got home, I found that all the liquid had boiled off and the pot had been cooking dry for who knows how long. There was a thick layer of char on the bottom. I was sure that it would be ruined. Well, I can hardly express my astonishment when, after a bit of soaking and scouring, it came out unscathed. A year later, that same pot is still active in my kitchen."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,583
The sheet is tight when they are washed, dried and put on the mattress but after sleeping on them, they stretch and fit loose. Otherwise they are well worth the price. I like them I just have to remove the sheets from the fitted corner space and remake the bed each morning in order to keep them tight for the next night.
{"question": "Will the fitted sheet stay tight on a 6 inch mattress?", "document": ["These were a disappointment, because if your looking for a cool crisp sheet to scroll into bed with, dont buy these, the bottom sheet wont even stay on my mattress..nothing more aggravating then to get up in the morning and the whole sheet has come off the bed.", "Previous reviews remarked on thinness of sheets so I was prepared for that & didn't mind that aspect. I get warm so I prefer cooler, lighter linens. However, I was not prepared for the sheets to have ground in stains. Washing did not remove them. Secondly, when putting on bottom fitted sheet, the elastic broke so it did not fit mattress snugly.I would not recommend these sheets. The adage "you get what you paid for" definitely applies.", "For the price, these sheets are worth the money. The fitted bottom sheet does not fit as snugly as I would like, while the top sheet is not quite wide enough. The material, however, feels nice.", "Finally, sheets that are smooth, soft and wrinkle free! The deep pockets fit beautifully over my mattress with featherbed. So much money wasted on coarse fabric sheet sets that ended up in the give away bag. Thank you AMAZON for the unbeatable price.", "I love them! Can't beat the price. Super soft. Washed nicely. I have a very thick mattress and they still fit..can't wait to sleep on them tonight ! Joyce Wilson lundberg", "I have a firm memory foam mattress and this sheets fit perfectly,they are pure soft cotton and caress your body all night long.I love them. I saw a realistic review and immediately ordered 3 sets.I wouldn't hesitate to re-order again.", "The sheet is very thin", "They went with the curtains i found for my room. The sheet set is wonderful.they are also really comforterble. Thank you.", "This sheet set was just what i was looking for. Soft and pretty. The corners are deep pockets and fit my bed perfectly. Will purchase again for sure.", "I was very disappointed when I rec'd this set. The queen set was very very light weight & so flimsy. They were described as deep pockets, but only 2 sides fit over my entire mattress side. Also, the color here on site is a more blue grey, but when they arrived they were a bright light blue, very light blue-not what is pictured. They look cheap, but were soft. I guess you get what you pay for...lesson learned!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,603
Both the zoom and focus can only be operated manually by the button on the bottom of the camera.
{"question": "Can the focus and zoom features be operated remotely or only manually by the buttons on the bottom of the camera?", "document": ["Nor is there any explanation for the various parameters that can be set. The camera seems to have the ability to detect motion but I have no idea how this would be communicated back to the DVR. Also not mentioned is the focus and zoom controls (which are on the bottom of the camera). They also provide a small allen wrench, but I have no idea what this would be used for (some internal fine adjustment I would guess. It's a shame that such a beautiful camera has such poor documentation.", "Very well built camera, but twice as long and double the diameter of the camera it replaced.I didn't get the single sheet of poor documentation that others here got, and couldn't find anything on the web to explain what the little joy-stick does. However, I connected it up, set the zoom lens (which is why I replaced the original camera), set the focus, and that was it.", "This camera is excellent. Well built, great image, terrific IR (at least 100'). Has a lot of features and very impressive for the money. However, because it is built like a battleship, it is large and heavy. If you have an application where you want the camera to be small and inconspicuous, buy some other camera. I took off one star because the documentation is poor beyond belief. There is one sheet and it assumes you know how to use an EFFIO-E camera.", "I purchased these cameras thinking they they would zoom from the description. I couldn't figure the zoom out, nor did the owner's manual describe the procedure. The picture is terrible, do not buy.", "IR Range and 12mm field of view are great. Solid case construction but larger than similar outdoor cameras. Bought two units, one would not switch properly to night vision and was returned for refund. Manual zoom and varifocal controls are not accurate. Zoom is very limited. Manual is terrible, does not explain anything about the manual controls or the OSD setup options. I had to search on the Effio-E CCD to get any help with the OSD settings.", "I bought this camera to replace one that burnt out. This camera came with no information and does not work in low light at all.", "Camera worked great for about a month. Now it wont power on at all. I tried diffrent cables that wont on my other cameras.", "I needed a camera to replace our webcam over looking Newport Harbor. It looks great both in daylight and at night. Look for yourself on our website: [...]", "I finally installed this camera after purchasing in April. It worked OK for about 20 minutes then went to black screen.No response after 2 emails. I'm going to try Amazon for help.", "i bought the camera seller said he had a problem with it i bought to see if it would work and it didnt but the seller was great i got my money back with no problems i bought another one same kind and it works great"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,629
The large speaker provides bass and the smaller speakers are more treble. I hooked them up to my home theatre. They made a huge difference. I highly recommend them. Best purchase I made in a long time.
{"question": "How does the Acoustimass 3 Series compare to the Bose Companion II (computer speakers)? Is it just that the Acoustimass has more bass?", "document": ["My Wife just purchased the Bose Acoustimass 3 Series IV for my birthday. I opened the box and hooked them up to an old (7 years) Sony reciever that had been sitting in the basement and threw in a old Santana CD. I can't believe my ears!! The clarity and range of sound is unbelievable for the size of the cubes! Yeah the Bass Module isn't going to shake the house down but it definitly adds to the listening experience.", "This may not be a popular review, but my wife and I were sorely disappointed. They sound like a cheap boombox. We are very happy with Bose computer speakers and we decided to get Acoustimass speakers to replace our home theater. We returned it the same day we got them. The wiring is very simple, I will give you that. The sub woofer barely does anything, even when playing The Chemical Brothers! We compare them with the Bose computer speakers and Acoustimass were clearly inferior. By far.", "The manual specifically states NOT to connect the speakers nor the bass module differently as it may damage the units.I am currently using the Bose Acousticmass 3 series IV as the rear channels in conjunction with a pair of Bose 201 for the Front channels for in the TV room--it sounds great! I have cranked up the sound for both movies and audio CDs and I am very pleased with both. Great price for the sound quality!", "Stands and wall mounts for the cubes are available from Bose as well as numerous aftermarket manufacturers.From past reading I'd become aware of a double-chamber reflex speaker design that is said to provide bass enhancement over a wider range of frequencies than can be obtained with standard ported (bass-reflex) speakers. (1) The look of the Acoustimass 3 module suggests a similar design pedigree, a factor that may explain its impressive performance-to-size ratio.", "Have to agree with previous reviewers--bass is there but lacking. The separate woofer is not a subwoofer by any means. I'm using the Acoustimass 3 system as the \"front speakers\" in a low-budget surround sound system. Also have to agree with a previous reviewer that the individual cubes sound good. Just running the system without a center or rear channel speakers connected, \"Fellowship of the Ring\" sounded quite tolerable.", "This allows for convenient bass adjustment by simply moving the Acoustimass module to that part of the listening area that offers the smoothest bass response. This means that compared to bookshelf and floor standing speakers, the Acoustimass 3 system gives users a better chance to obtain a satisfactory result without having to engage in objectionable furniture arrangements or acoustic modifications.If you regularly listen to broadcast sources, you may also find this speaker system to be a pleasant surprise.", "Since bass is generally mixed equally in both stereo channels of a recording, utilizing a typical bookshelf or floor standing speaker system where both speakers reproduce bass frequencies would be problematic for me. Add in an amplified subwoofer and things could get more complicated because at that point I'd have up to 3 bass producing elements that could be causing problems. The Acoustimass 3 system has an advantage in this case because it appears that the cubes don't reproduce any bass frequencies and therefore don't factor in to bass tuning.", "We just bought the Bose AM-3 Series speakers to replace 16 year old KEF speakers. We needed the space the old ones took up, and decided since we didn't listen to the stereo as much anymore, we could sacrifice some performance quality for size.What a wonderful surprise to find that after hooking them up we lost nothing in quality.", "This is my second set of bose speakers. Yes, they are more expensive but when it comes to speakers you get what you pay for. I bought my first set of bose 601's in 1990 and they still sound like fresh out of the box. I use the 3 series as my rear surround sound speakers but they fill the room with perfect sound when playing music. Just a TOP notch set. Bose proves when it comes to speakers size does not matter.", "I believe these factors rule out any possibility that the existence of vocal components in an Acoustimass 3 module causes either reliable module localization or compromised stereo separation.I noticed that when I placed my Acoustimass module on the left side of my entertainment center, I obtained a wide range of bass with no obvious booming in other portions of the listening area. On the other hand, when I placed the module on the right side of my entertainment center, there was a limit to the bass output at the main listening point."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,637
I did purchase this sensor pack and found that the documentation is non-existent. That being said most of the sensors are very simply and could be hooked up to Arduino by first identifying the sensor connection mode (digital input, digital output or analog input) Once the `mode' is identified, then any tutorial which uses the same `mode' would be applicable. If you have questions on a specific sensor, then let me know which one and I can take a look to see if I can figure out the specifics.
{"question": "Is there a tutorial for all of the sensors? I know how to use an Arduino, but just as a precautionary measure :)", "document": ["I guess they didn't have any microphone code so they just threw this is the folder. There are a few cool sensors but not $70 worth. You are must better off taking the time to buy several sensor seperately that you know you will use.", "All you will need is an arduino, and some time. Everything else you need is in the kit. Do not forget to download the files from the link provided on the amazon page. There are detailed pictures, descriptions and samples you can use to explore the fun world of sensors.This would be a 5 star rating if they included the name or type of sensor on the silk screening for each one.", "I received exactly what's described. No instructions came with it but there's a link to documentation in the description. 4 stars because whoever wrote the documentation definitely doesn't use English as their primary language. It's easier to search the web for the part number and find other documentation.The devices aren't labelled so you need to compare them to the picture on Amazon or in a .pdf you can download to identify.You'll want to buy a parts organizer but if you're fussing with an Arduino you should probably get one anyhow.", "All the sensors come packaged in a nice plastic container. I haven't had a chance yet to use/test them all but the sensors I have used have all worked as intended. Biggest downfall is the lack of documentation. It comes with a picture sheet so you can match sensor to picture/name. The documentation that you can download off line is lacking in organization and clarity.", "Look at all these shields!!! Laying them out on my desk for organization was great. I'm learning to use arduino and these are helping. You can do all sorts of little experiments with them, sometimes with multiple ones at a time. There's an initial period of matching all the shields to their picture and description but it was all there in the end, get yourself a parts-box or organizer though, so you don't have to play the matching game every time.", "The kit comes with 37 sensors which is more than I even knew existed for the Arduino. I have not yet reached the point where I am ready to try out the sensors but they look very interesting and I am looking forward to using and learning about each sensor.", "This kit has an excellent collection of sensors that are useful whether you have a specific agenda or just want to play around. I bought them with my first ever Arduino board and have had no problems with the parts. I deduct one star due to the difficulty of finding schematics for the parts. I would recommend this link:[...]", "I bought this item because it was a large set of sensors to add to my son's basic Arduino kit. The sensors came with just a small booklet that lists the sensors by name - nothing else. The sensors are not labeled nor is there ANY description of how the sensor operates. Hidden in the middle of the Amazon description (not with the package itself) is a link to a website where you can download a product manual of sorts.", "I am the sitting student chairman of my school's ACM chapter, and we use this every week at our open hacks. There is a lot of cool stuff here, and so far everything works.", "It's a nice kit of sensors easily interfaced to Arduino. At $2 per sensor, with a wide range of sensors....its a lot of fun to familiarize yourself with sensors, and Arduino interfacing.So for those who are contemplating purchasing this kit.....caveat emptor...no hookup instructions....but Arduino code is downloadable.It is easier if you have some background in electronics."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,647
Yup. I have one with my FR60.
{"question": "FR60 Is this device compatible with my Garmin FR60?", "document": ["Cant post in spanish. dont know why is this. This is a great complement for every runner who owns a garmin or ant device compatible.", "The footpod works beautifully with the Forerunner 405CX. It's an essential accessory to anyone who does treadmill training in addition to outdoor running.Syncing the footpod with the Garmin devices is simple and I've never experienced the connectivity issues that I did with the Nike+ system. My footpod is always recognized within seconds of beginning and I get great feedback on my various devices.I have also used this with the FR60, but not on a regular basis. I didn't have any problems connecting with that device either.", "I purchased this foot pod around a year ago and have put over 500 miles on it. I use it for recording my distance on the treadmill and also my cadence on all my runs. I have a garmin 405cx forerunner and the pairing / calibration was simple and easy. The nice thing is that this sensor works with any device that is compatible with ANT+ foot podsI believe most if not all of these foot pods are made by the same supplier and just branded garmin, polar, etc.", "It is the FR60 that is a little difficult to figure out. Garmin has been extremely helpful in getting it calibrated to the FR60.", "Nothing to say about it really. If you want to know your cadence you need this. It keeps your mileage more accurate. I don't think there is another product that is compatible with the Garmin (I don't know, I really have no clue), but I never had a problem using the foot pod.", "Another excellent quality product by Garmin. Compact, reliable, with ANT+ making it compatible with many devices. Just wish Garmin comes up with an option to know battery level of this little beauty e.g. LED, and also a way to fix it with shoes that do not have lace or under sole option, e.g. maybe on the heel.", "This foot pod works in sync with several Garmin products--for me, the FR60 watch and heart rate monitor. The foot pod provides additional information essential to training, particularly distance and steps. It took me a bit to get it sync-ed (when in doubt read the manual--really), but then was easily calibrated, using data from my GPS (would have been equally easy on a track or measured distance). I was particularly pleased to note its sturdy clip to my shoe.", "The Garmin Footpod is an ANT+ protocol fob that fits perfectly inside the Nike+ slot in most Nike running shoes. If you don't have a Nike+ compatible shoe, you can use the included clip to attach it to your shoe laces. It has an internal accelerometer and an ANT+ wireless chip allowing it to transmit your foot strike data to various ANT+ compatible devices. Personally I'm using it with the Digifit App on my iPhone 4S. It works great.", "Garmin Foot PodThe Garmin Foot Pod is the latest design, featuring the smallest housing that I've seen for this type of design. It is designed to fit in the compartments of MiCoach-compatible shoes as well as clip onto the shoelaces of any standard running shoe.I have a pair of Adidas Marthon 10M men's road running shoes that have a small pocket underneath the insole in which the Garmin footpod easily fit.", "Muy buena inversion para correr, mas preciso de lo que esperaba, es muy buena herramienta de entrenamiento en conjunto con el forerunner FR60"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,659
One also has to wonder why this unit is still being sold on Amazon at the full price of $285.19 if filters are not available. Be forewarned potential buyers!
{"question": "Where To Buy Filter Replacement? Does anyone know where we can buy a new filter for this unit at?", "document": ["filter solution:Step 1 buy the 83190 Sears/Kenmore HEPA Replacement Air FilterStep 2 tape off a top and right portions of the filter slot to make it slightly smaller than the 83190 filterstep 3 add tape \"flaps\" to filter's top and right sidesstep 4 insert filter while holding back tape flapsstep 5 release flaps so as to have them stick to the tape in step 2step 6 let me know if it works long term as i just did it an hour ago.", "I have been running this unit since August 4, 2011. I was very satisfied with it until today when the replace filter light came on. I then was very unhappy to find info on Amazon discussion forum that the replacement filters have been discontinued by Sanyo. That makes the unit worthless. This happened to me with aother brand of air purifier that I purchased several years ago. I had to just throw it out. I will be very reluctant to buy anything else from Sanyo.", "I would be very grateful if anyone has had this problem please let me know. Thank you guys.", "it doesn't matter how well it works, the company, Sanyo, has discontinued making the replacement filters- so don't waste your money! You can never change the filter if you buy it!", "Thanks to this product! * Around end of May 2011, my son developed allergy symptoms. And, in next few days the filter light flagged on. * Now searching for the best place to get the replacement filter (not easy to find one). I didn't get the life of the filter as stated in the product document (4 yrs). However, we have been running the product for at least 330 days x 8 hrs. Still a best buy.", "Nothing that would, or has, woken anyone up or freaked our our mental cat. I know, I know, a cat with allergies in the home but my son is not allergic to pet dander. However, animals do increase the dust mite population as they enjoy the taste of dander. Luckily this machine covers the whole spectrum of allergens and filters out dander.Maintenance is easy.", "I have owned mine about three years. Love it. Or should I say LOVED it. We had a falling out when I learned the replacement filters were discontinued.Now I see in the comments of the video review here that Panasonic is offering a replacement filter. Woot!!Buuuuut.... THE REPLACEMENT FILTER COSTS $130!!! That's more than what I spent on the whole unit!! !So don't be lulled.", "The replacement filters were expensive to begin with, so their cost was not all that off the original replacement filter cost. Purchased the replacement filter from Zendo Japan Shop, shipping was included in the price, their communication and delivery time was stellar. Highly recommended source for the replacement filter for this unit, works, and they are an excellent seller. The Sanyo Air Cleaner is happily chugging away as I type, doing its job, renewed, and refreshing the air.", "Firstly, the Sanyo Air Washer is an exceptional unit handling the worst case scenarios: even smokers.But getting original replacement filters is difficult and expensive. In UK & Europe particularly.Fortunately the Fellowes Large HEPA filter 9370101 fits into the Sanyo pre-filter carriage on two dimensions. All you need do is cut 15mm from the width, which is easy as this is NOT a rigid 4-stage filter like the Sanyo original.", "If you want to buy replacement filters, go to google shopping and search \"Sanyo ABC-VW24\".You will see that they sell 5 filters for about $200 (10 for $335 and so on).[..."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,663
10", will take a slice about 1 1/8 thick. As an aside,,,, I would buy this toaster again!
{"question": "I'd love to know the length of the single opening on this toaster...thanks! I'm amazed that dozens of people were nice enough to answer my question. Thanks so much - no need for anyone else to answer!", "document": ["Just received our Cuisinart CPT-2000 long slot toaster and it's great. It replaces an older model we had that finally broke. We thought the old one was nice but this one is much nicer. It's totally silent except when it beeps to let you know it's done - no more motor noise when it raises and lowers. It's also got count down lights that stops kids from asking, \"Is it done, yet?\". The bagel setting is wonderful; love the toasty cut side and chewy top side.", "As a reference, if you cut a loaf of bread from the store length-wise - you could probably fit the slice into the toaster.2. It's not cheap. I eat toast a lot so I don't care. I need something that can stay out on the counter - so I rationalize the price that way.Some other seem to have some quality issues. I have not encountered a single one and between my wife and I - the toaster gets used about 10-12 times a week.", "The exterior is WAY easy to keep clean and I love the long, single slot. I bake bread and love the ability to toast different size bread slices.I replaced a $20 Black and Decker \"Arize\" toaster with this one. Unfortunately the Arize was discontinued. This one does toast much more evenly... not sure that makes it worth $70 more, but overall I DO like the toaster. But just shoot me next time I consider spending $100 on a two slice toaster! :)", "Our previous toaster was also a two slice, long slot toaster, but a different brand. This one has more bells and whistles and seems to toast fine. My only complaint about it is that it is slightly shorter (length) than our last one. The bread I like for toast, either needs to have one slice put in top down or on it's side and it's still a tight squeeze. If it were 1/2 inch longer, I'd love it.", "Works well so far. I very much appreciate that it didn't smell too heavily of chemicals when I first used it (unlike other models I've tried). It looks classy, the LED countdown is a nice touch, and it's easy to use. The only con is the INCREDIBLY loud beep you get when the toast is done. Totally unnecessary beep volume that wakes my wife up on weekends when I'm trying to make a stealthy breakfast.", "I needed a toaster to fit a long narrow space. It's easy to operate and toasts nicely. This toaster works in my limited narrow space and I would recommend it to anyone with that need.", "A power cycle doesn't help. We will be retuning it and looking for something else. I'm inclined to go back to a straight mechanical toaster.", "I completely admire the comments of Lucy T -she's right that if they had not adopted that clumsy beveled length-ways profile, the extra length would have accepted full sized slices. Maybe she's a designer, Maybe they did not use anyone but an intern to design this toaster. I am a designer which is why the heat level buttons irritate me. They had a 50% chance of getting their location right and the intern blew it!", "Two of the front LED control lights went out within a year, but I generally like the toaster. But I'm sad the lights burned out. The lights let you know what darkness setting is active, and without them it's a guess how dark the bread toasts! This should not happen so soon or at all.", "I was disappointed with this model and returned it. No dimensions were listed except the length of the slot. I thought I was buying a small, narrow toaster similar to what I already have but is getting old and worn. When the toaster arrived I was surprised at the overall size which took up most of my counter space. I live in a vintage high-rise and don't have space like a new home or a loft. This model is definitely not for people with small kitchens."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,676
NO NO NO! this is a M42 (thread Screw) to EF adapter. You need the FD to EF adapter.Good luck!
{"question": "Will this mount a Canon FD 50mm to my Canon T1i?", "document": ["The adapter works perfectly to mount my 50 year old M42 Super Takumar 50mm/1.4 and 135mm/3.5 on my Canon T2i. No grinding, no binding; just smooth rotation into the confirmation \"click.\" People complain that the focus/aperture ring/distance meter is relocated 90 degrees from top dead center. Well, that's exactly where it should be. If it was at top center, the on-camera flash protrusion of the T2i will block my view of the numbers.", "I use this to mount a 55mm f1.8 Super Takumar to an EOS T1i. Focus confirmation chip works brilliantly, which is especially nice because modern cameras don't come with the prism viewfinder anymore. This mount will suffice for your M42 to EOS needs.", "This was a little piece of equipment that I didn't know existed until about two weeks ago. I ordered it and now I can use my Takumar lenses from 1966. They have been sitting for years in the camera case I used in Germany. Had given up on using these great lenses. I had a 28mm. 50mm, 105. 200mm, and a 500mm. This little device put new life into my old lenses. They all fit and work with my Canon 7D.", "I own two Canon digital cameras (an old XT and a Canon 5D), and a decent collection of Pentax lenses, so I've been using Fotodiox adapters for some time. Years ago I purchased two of their basic adapters without the chips. Those adapters allowed me to use all of my lenses on the Rebel (small sensor) but I could not focus on infinity with the 5D (full-frame sensor) with my 3 widest lenses (24mm, 35mm, 50mm).", "This adapter fit perfectly on my Pentax screw mount threaded 50 mm lens, and enabled me to use it on my Canon camera. For the price, it was worth the try to resurrect my old lens.", "I was looking for something to mount my Helios 44-2 onto my Canon T4i, and I decided to pick this unit because of the Dandelion AF confirm. I just received it today (after over a month wait, which is another story, but I'll keep this review focused on the product itself), and I'm very happy to report that the AF confirm works great with my T4i.", "New to this world of photography.Received a Canon Rebel AE-1 as a gift along with various lenses for which I thought I understood this Fotodiox Lens Mount Adapter would make the adjustment to my new Canon 60D. The Ad stated it would cover so many camera lenses - 60D being one and it does fit the 60D lens house but none of the lenses; they are all to small for the adapter.", "The adapter allows me to use my old Takumar (Pentax) lens collection on a Rebel T2i. The adapter's fit and finish is excellent and the focus confirmation chip is nice. If you are wondering how 40 year-old glass compares to modern lens I can tell you it's definitely worth $29 bucks for the adapter! The Takumar 50mm F1.4 rocks in low light and all the old lens have a superior focus ring. Fotodiox has outstanding customer service should you need it.", "This adapter works well with my M42 lenses. They line up the way they should when attached to the adapter and camera. (markings on lens point up) The only small issue I had was, when I first tried to attach the adapter to my camera the EOS mount caught at the point it should have clicked to lock. Cautious I turned the adapter back off and looked at the camera and lens, all looked good. So I tried again. It caught right before the click again.", "The adapter adapts an M42 mount to an EOS mount pretty well, though not rock solidly, and on my lens at least, the infinity marking on the lens is PAST infinity, suggesting the adapter isn't quite thick enough. To be clear the lens will focus at infinity, but that point of focus is just before the actual infinity stop on the lens which is frustrating.Furthermore the documentation available for programming the dandelion chip, the focus confirmation section in particular, is abysmal at best."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,690
No it is for the 14-42 PZ lens H-PS14042K
{"question": "Does the lens DMW-GMC1GU work with H-FS014042?", "document": ["Removed a star since it came without a lens bag. The lens seems unused and I don't think it was used and returned. Not sure why the open box status other than the missing bag? The macro lens does it's job and is better than the filters you can buy for micro photography. I use with a 14mm. It will also work with the X Power 14-42. Comes with two size adapters.", "because I order the conversion lens for lumix panasonic G3 and the lens doesnt fit to the lens of the camera, and I want to know if is possible to obtain an adapter for the camera", "It is very handy to switch from scenes to macro, easy twist on and off while walking around. I like the shots I'm getting. But the connectors are goofy. The adapter fits very snugly. It is stuck on my X VARIO PZ 14-42mm. Not tragic, because the lens cap does fit over it and I only have one lens like that but not ideal. The lens fits loosely on the adapter.", "This lens worked great on Macro shots, the biggest issue I had was that I need a lot of light not to have any noise in the picture. Not a complete loss as you usually need an extensive amount of light on a macro shot, but it is hard when you are using a Micro 4/3 camera like the GF2. It does not distort when I zoom so it is useful for getting shots with out moving the camera on a tripod."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,727
I doubt it. I am not able to make it work with very many drives. I have gotten it to work with 1 WD 320 drive, but almost all others I have tried it won't talk to or requires that I format them every time I try and use them.
{"question": "Will this work with a Western Digital WD3200B ATA drive and OSX 10.9?", "document": ["Super simple, I only need to write to the drive once in while, as they are used as backups. For the price they work great, in, out done. I ordered two had both done in under, 10 minutes. This is a great way to use old laptop hard drives.", "I got this for my (non technical) brother in law. he was able to install his old laptop harddrive into it and get it to work in 10 minutes.", "For $9 plus shipping, I figured this probably wouldn't work. The case wouldn't fit, the cable would be some weird non-standard size, or perhaps the whole thing would catch fire.Nope, this case works exactly as advertised. I just plugged in my old laptop harddrive, hooked the USB up to my computer, and the little \"found hardware\" icon lit up. I'm so happy!", "its as easy as plugging your hard drive with the ATA adapter and then slipping it into the aluminum case and then putting the screws in to secure it.the hard drive works instantly as you plug the USB cords into your computer. however, if you use a laptop, you may require using both USB connections (provided) to power your hard drive because some laptops do not put out enough power to run your hard drive.", "The enclosure is strong and sturdy and a great deal for being under $10.It works as it should as a back up external drive or as a data recovery tool.I would buy another.", "Some CLI utilities will not recognize this device as a hard drive, but in my experience the item is very reliable. It's easy to plug your device in, much faster than needed, and the case is nigh unbreakable.They even include a little screwdriver and USB cable with the kit. Now that I have bought 10 of these, I have quite the little collection.Thanks for the excellent price, too!", "This case works well with my old hard drive and helped me diagnose my computer's problem as RAM issue, not HDD. It is a little flimsy, but lets you connect a second HDD to your computer through a USB port. It installed instantly on my 10 yo Toshibal laptop running XP, and is a good value for the price. Took over 3 weeks to receive from Asia.", "I have quite a bit of experience with external drives and enclosures. Had my first one at least 10 years ago when USB drives came into fashion. Over the years prices have dropped significantly, but so have the qualities of the products. This one is no exception.When I first got it, the drive looks slim, which is pleasing to the eye. Other than that, not much else stoodout as great quality.", "It was easy to install my hard drive in this unit. It works! What more can you ask? I can hear the drive move just _ever_ so slightly inside if I shake the enclosure around, but only _just_ barely. So far, so good! Been a champ for trucking media around by sneakernet. For less than $10, and the cost of an old unused laptop drive, I now have an external drive to move around large files.", "I had 2 dead windows laptops (10 years old) with IDE drives (the ones with pins)."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,730
No - I just tried it - it's too small.
{"question": "Will this fit on canon 50mm 1.4?", "document": ["Excellent cap, I bought it for my 50mm 1.8 Canon lens. Is a shame it didn't came with the lens in the box, but at least is available.", "This fits on my 1980's era Canon AE-1 50mm lens perfectly. It might be tricky to find out which lens cap fits on your 25 year old camera but this is the one. Shipped quickly and it actually is a better center grip design than the lens caps that have the grip on the outside.", "I got this to put on my canon lens. I bought two of them for my 28mm f2.8 and 50mm f1.8 ( mark I) they fit well and made it look nice on the two lenses. I am glad I could get them at a good price for my canon lenses.", "Its an OEM lens cap for the 50mm 1.8f lens. What's not to like? I'm just very happy that I was able to find it on here so cheap.", "fit perfectly over my lens. now i have no worries about it getting scratched or dusted while carrying my lens around.", "The lens came as it should. It fit well and got the prduct as i wanted in the photo andwill need another one.", "this came in Canon packaging and is a perfect replacement for the cap that came with my camera lens and I am going to order more", "I got this for my my Canon SX10is camera which was supposed to come with a lens cap but did not. It fits well and is easy to put on and take off.", "Exactly what i was expected , very good quality , similar to original canon caps ,i lost mine and I had to buy a new one", "These latest Canon caps are excellent in build quality and function. I'm thinking about buying an additional in each of my lens thread sizes so I'll always have back-ups."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,739
I couldn't get it to connect to mine. It never worked no matter how many times I tried. I hope this helps.
{"question": "Will it work with a Galaxy Tab Pro 8.4", "document": ["I contacted Samsung about the keyboard not working. This is the response I received:Thank you for contacting Samsung. I understand that you are experiencing issue with connecting Bluetooth keyboard to the Galaxy tablet Pro 8.4.According to the information provided by you, it appears that you are only having issue with connecting the bluetooth keyboard to the tablet. As you are able to connect other bluetooth devices to the tablet and only experiencing issue with the keyboard, it is not an issue with the tablet.", "It does everything it's supposed to! I returned mine because I went after a case and keyboard combo for my retina mini. This keyboard was as proficient (if not better) then the Zagg or Logitech. I returned all those, and my mini, cuz the word app iPages is terrible IMO. But, THIS keyboard is great and may re-order to use with my Samsung 8.4 pro.", "Works great. Paired easily to my Galaxy Tab Pro.", "This keyboard is great for any Samsung Galaxy Tab Pro. I popped the batteries in, connected it almost instantly, and done! I defiantly recommend this keyboard for anyone who does not want to use their screen keyboard or someone who wants an easier way to type anything. It is very light and does not feel cheap. I love the slight slant it has!", "This product does not work for the Samsung galaxy tab 3. Whem ordered this product contacted the seller bc my shipment hadn't come in and they said it was amazon. Called amazon and said the seller never shipped the product, I felt like the seller was miss leading and to top it off I still had to pay for shipping it back!! Was not happy about the service from here... FYI for people with samsung galaxy tab3 do not get this, not compatible!", "This keyboard works great. Easy to hook up to my galaxy tab and I love the keys on it.i definitely recommend it.", "Arrived exactly as it looked in the picture and as described in the post. Works great with a Samsung Galaxy Tab 2. Easy to hookup.", "I just recently got the galaxy table pro 10.1 and it works great, I like the fact that it runs on 2 AAA batteries but I do carry an extra set just in case it does happen", "I bought this for my husband. He is not a techie at all, but owns a Galaxy Note 10.1. I was nervous about having difficulty pairing, but it was very easy to pair with the tablet. Just for kicks I paired it with my Tab 2, easy as can be. We will both enjoy this keyboard.", "I purchased two of these keyboards, one for me and one for my wife. One worked great and the second had issues. I sent an email to the customer service email address on the back of the user manual and they responeded in 24 hours. They shipped me a replacement and it arrived two days later. It works great and my wife and I both love them. For those who are interested we are using them with Samsung Galaxy Note 8.0 tablets."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,782
Yes and no. If you're just doing stuff like web browsing and social media, then it is great for that. However, it cannot do programs like Photoshop or any sort of Halo games. The good thing is that you won't need anti-virus for this device and this App Store is amazing, you can easily find something for everyone in it. If you're concerned about typing on a touchscreen, companies do make iPad Mini keyboard cases with Bluetooth in them. Plus, that Retina Display on the iPad Mini makes the experience a lot better than with the iPad Mini 1. Any other questions?
{"question": "Can i use the mini 2 like my lap top", "document": ["I upgraded from the iPad 2. The size of the iPad mini is perfect. Retina screen is so nice! Super fast performance. This thing is a blast to use. I use this Mini 10 times more than I ever used the iPad 2. The size is perfect for gaming, travel, productivity and videos. I recommend this model above the iPad 2. The retina screen and upgraded performance is worth the $$ over the first gen iPad mini.", "I like this mini so much that I wish that I had got the cellular version and not just wifi then it would be the only tablet I would ever use.", "I don't have anything to add that hasn't been said here or in past reviews of full size iPad. The mini is the same, only smaller. This is the perfect size for my needs. It's like Steve jobs said, iPads were not designed for being productive, they're for exploring, playing, reading, checking email, etc., i.e. if I'm doing a task, like writing a report, I use my laptop.", "This is my 4th Ipad - I always upgrade and give my parents or siblings the older ones. They somehow like to use my tried and tested products. It acts and looks as all the others have. When I was asked to give my one year old Ipad mini to my mother - I decided to upgrade to the retina display. I see no difference at all. Think its just marketing.", "Its fast, screen is good, but speakers mediocre. However, I was unable to find a browser that would properly re-fit text into the screen edges when enlarged. My android has a very good after market keyboard. Also, Opera classic and even Opera mini have very good text adjustments for size and width but not on the mini.Accordingly I use Nexus 8 as work horse, and Nexus 7 for fun since it is like something out of science fiction.", "My friend sold is old iPad 2 around the same time I bought this and he sold it for a little less than $200. I figured that if I ever wanted a new one, I could sell this and get a ton of money on the resale, whereas there are so many Android devices that they fade from memory and don't have high resale values.I've had it for a few months and use it for a wide variety of stuff. Its performance is amazing and I do not regret buying it.", "I tested a few minis in the store and liked the feel (it's perfect for thumb typing, even for people with small hands like me!) of the tablet, and I was thoroughly surprised by the screen quality. Details were very crisp and it didn't feel crammed together like I originally thought. This all might not sound like much since I was coming from an iPad 2, but I do have a retina Macbook Pro.", "im going back to my nexus - I cant use a network scanner - apple says no.I cant run any of my work tools, like a simple ip scanner, a wifi scanner to see channels - apple says no to these devices.", "Time to buy a new iPad since my girl keeps taking away the iPad 3. I am not interested to buy the 1st generation of iPad mini since its not a retina display and the chip is almost the same with iPad 2.the iPad mini with retina display is definitely worth to buy. The most impressive thing is just how crisp and vibrant the screen looks. The processor is so much faster compare to iPad 3.", "I just sold my iPad 2 and switched over to the mini with retina. The main problem I had with my old iPad (and full size iPads in general) was strangely the size. The screen space was great but came at the cost of portability. It added a significant amount of weight and bulk to whatever purse/bag I decided to put it in. That became a huge nuisance as a student constantly moving from one area of campus to another."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
31,826
No it doesnt work it will break if u put it on an ipad and its made out of plastic not rubber. The ipad is much more thick than the ipad 2
{"question": "Does this work with the first iPad?", "document": ["While this item marginally works there are some flaws in the design that make me wish I had paid a bit more for a different one. First, unlike in the picture of the back of the iPad, the item does not cover the entire speaker area so you still lose sound out the back. Second, while it doesn't CLAIM to work with a shell on the iPad, who doesn't protect there multi-hundred dollar investment?", "It defiantly does make the sound much better and louder I just wish it would work with my ipad cover.", "These work in that the more sound forward from the rear-facing iPad speakers. Just don't expect them to sound as good as any decent Bluetooth or wired speaker. Seem to deaden lower pitches and make the sound tinny. Very light, easy to take along on a trip.", "I like it, it works, I have no problem with it. Gives a decent sound, but it doesn't work miracles.", "Did not work! Kept falling off the device. Not worth purchasing. Cheap plastic and if anything muffled the sound more", "I thought this product will enhance the volume while listening to YouTube and webinars on my iPad and it did.", "This did not make my ipad lound at all. Very sad about this product. Save your money and buy a better speaker", "Purchased for my parents works as advertised but not as good as Audioamp180 iPad audio amplifier. Pops out an won't stay in place.", "Dont works i have a ipad 4 th generation and mini ipad i try to use but doesn't works with no one ;(", "This improves the s***ty sound from the rear facing speaker significantly. I find my Kindle fire has better sound than the iPad II."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,837
Pass-Through charging is not supported on mine. Connecting to the power immediately disconnected the full size USB charging ports.
{"question": "Is the Kmashi capable of pass-through charging so that the kmashi and your phone can charge at the same time when plugged into a 5V wall adapter?", "document": ["Here is the trick. There is a little button next to the 4 little blue lights on the side. Tap the button quickly once to turn on to charge device mode. Push and hold the button for 1-2 seconds to turn it off. Worked well once I figured it out. For charging the KMashi, it is automatic once microUSB is plugged in. I wanted to give 5 stars but because this critical info was missing I had to give 4.", "A four-LED bar graph shows the state of charge and indicates when the Kmashi itself is charging.I also bought the Vinsic "Tulip," (see separate review) charger, which has about one-third the capacity of this unit, but is smaller and lighter. Both are useful. For a camping trip or any time when you might need multiple charges from the charger without recharging its own battery, the Kmashi cannot be beat.I find myself using the Tulip more.", "Recieved uncharged so put it on charge overnight. Instructions said it would fully charge in less than 7 hours. First thing this morning it appeared to be fully charged - the lights had stopped flashing and all four were illuminated and steady. Unplugged the charging circuit and plugged a phone with a battery that needed to be charged, into the the output usb port, pushed the 'start' button, and...nothing. No lights, phone "battery charging" indicator did not illuminate.", "I bought this for my wife. She spends a lot of time on her cell phone (iphone 4) and often runs low on battery during conversations. I bought her this so she wouldn't have to stand near an outlet to finish her conversations. I also use it to charge my Kindle Fire. It charges faster than the plugs and can charge multiple times (wifes iphone can charge about 4 times before recharging kmashi).", "So far the KMASHI has performed as advertised. I have been able to recharge my i-Phone 5 about 4 times to full charge. I also hooked up both i-Phone and i-Pad simultaneously for recharge, although the time to recharge took a bit longer when both devices are charging - not something I would routinely do, but it works.", "[Recharge Time]During recharge, the MP816 draws up to 1.5A - as long as your USB power source can supply it. So it takes about 8 hours to fully recharge the internal 10Ah battery pack. But if your USB power source can only supply 0.5A, then it could take 20 hours! One drawback I discovered is that there is no pass-thru charging.", "I was not using it at the time, but WiFi, GPS, and Bluetooth were enabled in addition to 3G cellular radio.20 minutes brought it up to 55%, with 2 LEDs still lit on the battery pack.At 1 hour, the iPhone read 88%, and battery pack was finally down to 1 LED.I then plugged the Nexus 4 back in with it at 52%, and charged the phone while running errands on my commute home, approximately an hour of plugged in time.", "Very useful, and I like that it shuts off after a few seconds once you unplug your phone from it. Another thing that I like about it is the 2.1amp port.I have a nexus tablet that requires a 2.1amp port to power up if it has been completely discharged, otherwise it wont be able to power up. I plugged it into this thing, and it was able to start charging.", "I bought many battery charge units before and they never seem to live up to their promises. But this one by KMashi was a total surprise for such affordable price. First it looks so neat. Kind of a fashion in itself. Opening the box, it fully charged up 1 hr (came about half full). Then I plugged my 8" tablet and smartphone (both almost empty charge) and charged up to full in matter of 2 hours.", "My aging iPhone does not hold a charge very well, and it's welded to my hip all day and frequently in use. Charging it overnight does not provide enough "Juice" for a whole day of operation.The Kmashi charger is larger than the iPhone and heavier, too, but it's a real powerhouse of a charger."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,845
I had the CH520 hose which this Nutone CT700 does not fit unless you buy the CT170 Wand with it....which I had to buy for around $45.00 more.I don't know about the CT600 so call Broan at 1-888-336-3948 and ask them...They're real knowledgeable and will tell you what you need.or www.nutone.com
{"question": "Does this vacuum replace the CT 600 and will it fit the hose for the CT 600", "document": ["I have ordered two different hoses that Nutone says in the product information will fit this vacuum and neither have fit. I am returning this item but I wouldn't buy it. You cannot find a hose to fit it.", "Well it doesn't fit our hose as promised….l now am faced with returning it or buying a new hose.Tried calling Nutone….that is a waste of time.", "First, I had to replace my old old electric power brush, then the wand, then the hose, then the wall unit. These new units don't match the old parts of NU Tone central vacs. It all runs great now. I am going to wait to replace the central power unit", "I purchased this item (along with a new hose) to replace the 20+ year-old original, and found it to have a much better cleaning action, adjustability, and dual-edge cleaning that the original did not. This item also has bright LED lighting which is very nice. It is also the only reason I didn't give it five stars. There is too much intense stray light from both the white forward-facing LEDs, and the blue height-indicator LEDS, which shine straight up.", "Make sure you can lay your hands on your purchase invoice/s also if and when you might need them. Three power heads later and one on its way doesn't say much for the quality of this once very reputable product. Their customer service I would give very high marks since they answered many questions for me when I was on a search to replace my original power head trying to make sure I purchased the correct components since I had replaced my hose many years ago. Good luck if you decide to buy.", "I was stunned frankly, but I guess happy since I wasn't going to have to pay to ship this darn heavy thing for a warranty repair.I only wish there was a way to just go back to the beginning and NEVER ordered this thing in the first place. I could have bought another vacuum or found an older but still new power head to replace my older one. Oh the journeys we find ourselves on once we buy something.", "I have also owned a Nutone vacuum system for approx. 15 years and was in love. About 4 months ago we had to buy a new power head and was disappointed to find out we had to buy the new hose to go along with it. Well it arrived and at first seem like a good thing. Well the power head does maneuver better however it does Not pick up lint and hair as well.", "All other power heads you might find out there are older models.It took three tries to get one that actually WORKED! First one would not run! Second one, the height adjustment was broken! The third one worked!If you have even a few years older model of power hose you will need to buy the metal attachment wand and make sure you get the correct model to go with your hose.", "My husband loves it but then he doesn't vacuum all that much and guys tend to like things bigger don't they!", "Great pickup on both ends. The price was right and the power of the vacuum picks up all the crumbs."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
31,846
11lbs. Is max weight
{"question": "Two questions: (1) Up to how much will this scale weight (eg, 11 lbs max) and (2) What type of batteries does it use?", "document": ["It works well. When I bake I use it to measure my ingredients in grams. Mostly use it for the flours. It will not measure in half grams so measuring 1/2 ts will not work. When measuring in grams and you add, let say one gram too much use a spoon and scoop a little off and if it doesn't change weights, push on scale slightly to increase weight then let go and it should correct itself.", "I never had a kitchen scale before and always had to pass by recipes that called for a weight measurement in ingredients. Now I can make those recipes and even make sure I am baking accurately.It has made a difference in some of my baked goods that called for a volume (3/4 C, 1 1/2 C, etc.) measurement and/or weight. In other words, I had a few recipes that called for 3/4 C or 100 grams (example).", "Got this scale in Oct of 2012 for my wife's Feb birthday gift. She's a gourmet cook and sticks with the 'top drawer' cookery items. This scale is now relegated to the lowest drawer in our house.It was DOA on first use. A change of AAA batteries was needed. She uses it 2-3 times per month and it's dead 2 of the 3 attempts. The Amazon/Cuisinart return policy was passed by 2 months before she opened the box! Is there some sort of internal charge drainage?", "It works just as expected, the only problem I found so far is reading changes from 2 3/8 oz to read 2 oz (should be 3 oz) when adding more weight. In general quality is good, packing is acceptable. I like free shipping.", "Likes:The glass platform, is easy to remove and clean.The cover doubles as a bowl.It's well made. The body and cover are stainless as opposed to cheap flimsy plastic.It has a clean simple design.Dislikes:It shuts off much too quickly and can only be powered by batteries. This is a real problem when alternately cutting and weighing ingredients, as in making sauerkraut for example.", "It is the greatest. The scale can convert from grams to pounds or ounces with ease. The scale bowl cover (not shown, IT SHOLD BE)is a huge plus. The cover is marked with 1 to 6 hash marks designating cups. When not in use, the cover protects the scale", "I had replaced batteries a few times over the year and one day I went to make something and pulled the scale out only to find it wasn't working. Checked new batteries which did nothing and even had my husband double check to make sure that a loose connection had not occurred. Nothing we did helped the situation, so after 11 months I had to retire my expensive kitchen scale! I am now on the hunt for another brand in hopes of one that will work better!", "The Cuisinart Electronic Kitchen Scale is very easy to use, and I appreciate the large, easily readable display. When I use it without the bowl, I can zero out the scale with a dish on it, and weigh ingredients. With the bowl I can weigh rice, pasta, or anything else that might spill out without the bowl. I have even used to weigh mail to see how many stamps I need. I do alot of cooking and baking and this scale makes it much easier to get precise measurements.", "I bought one of these many years ago and after much use, it broke. I then bought at least another 3 or 4 different brands before purchasing yet another Cuisinart one. It has most definitely been the best so far.", "This is a good looking scale with the bowl used as a cover so it is neat on your countertop. Easy to use and zero to tare or just add more to the bowl till you get the weight you want for each ingredient. Bowl make it easy to pour from it to another bowl or container. Display is easy to read, the only thing that might bother some is that the light goes out after 60 seconds but you can still read the display and you don't loose the weight reading.Highly recommend."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,857
For my 4s it worked for me in 2011 Kia Sorento
{"question": "I just bought a 2013 Kia Forte EX and have a 4S iPhone. Will this cord work for me?", "document": ["this cord does not work in newer Kia cars. I bought it for my 2013 Kia Sportage and it does not connect. I then called Kia and they said with newer cars you must purchase these cords from them for $50+. Not happy about that!", "I didn't want to pay $40 from the dealer for this cord and was happy to see it on Amazon. I have a 2013 Kia Forte and it fit perfectly. While the cord seems short for others, it was the perfect length for my car as there is a tray right below the input jacks. It works great with the car radio and I love the fact what is playing on the iPod shows up on the screen. I've played both music and podcasts with equal satisfaction.", "very cheap and it works perfect. I used it in my kia cerato (forte) 2013. All the iphone music information can be controlled by the radio panel, and the steer controls. I'm very happy with it.", "KIA iPod iPhone iPad Cable USB 3.5mm Forte / Optima / Soul / Rio / Rondo / Sedona / Sorento / Sportage / Fuze Lead Adapter Wire CordI purchased this from E&S; Trading but the cord didn't actually work. Let me tell you that this company has my business for life. They go way beyond satisfying their customers. I truly am very satisfied with all they have done to make my purhases from their company a very pleasurable event. Good work and THANKS so very much for all your help.", "I was a little worried when I purchased this because alot of people said it didn't work in newer vehicles. I have a 2013 Kia soul and it works great. I wish the cord was a little longer but it allows me to use my controls on the steering wheel just fine. :)", "Had hesitation buying this as some reviews state it will not work on new model cars but thought I would give it a shot since you cant beat the price. IT WORKS GREAT!!! I have a 2013 Kia Sorento EX and not only can I manage my ipod from my steerling wheel, it will also charge my phone. It works just like its supposed to! So glad I went with this instead of going through the dealer!", "Easy to use. Works perfect with my iPod in my 2013 Kia Forte Koup. I would recommend this product to anyone. It was very affordable.", "Radio control does not work with iPhone 4S or 1st gen iPod Touch in our 2010 Kia Soul. It does charge and works as an AUX cable.", "I bought this for my 2009 Kia Optima. The description could be more accurate \"KIA iPod iPhone iPad Cable\" leads one to believe that it works with ALL of these products.If you want this adapter cable to work with an iPhone 5 in your Kia, you need to purchase an \"8-pin to 30-pin\" adapter, as the iPhone 5 has a different connection than the older phones and iPods.So, yes, the product works, which is why I gave it 4 stars.", "Does not work for my 2010 Kia Rio with my iPhone 4, though it says they are compatible. My car displayed that a device was connected, but it didn't charge the phone or play music. I would call Kia's customer service and make sure that this cord will work for your car and your device. They told me this cord would not work, I'm still trying to find the right cord to play/charge my phone!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,922
No optical drives.
{"question": "optical drive?", "document": ["I bought this computer for office use by our college interns. Using the information at the top of the Amazon page for this machine, the specs seemed adequate for what I wanted. BUT I missed the fact that this computer has no optical (DVD) drive, and that it does not have a conventional mouse and keyboard. The keyboard is suitable for texting, but not for real typing.I guess I can install Microsoft Office by download instead of by DVD, and I'll add a conventional USB keyboard and mouse.", "Native DVD/Blu Ray are also going to function if you add a USB drive - the integrated HD3000 GPU is going to manage these functions without issue (speculated, but generally internet seems to support this). If you have a student or need a decent HTPC, I would still recommend this device.", "There is no recovery media included, and Lenovo does not include a tool for creating recovery disks (which they did with Win-7 systems). There is a Microsoft utility for creating a system image (inexplicably called \"Windows 7 File Recovery\"), and another for creating a rescue disk, but the rescue disk does not allow you to recover an image to a blank hard drive.", "You can find a cheaper Android or Linux computer to use for XBMC but I wanted a full function Windows PC and this one fits my needs perfectly. One other thing to mention is the fan is VERY quite which is a must for any HTPC. I even tried the newest Counter Strike (Global Offensive) and Doom 3. This little machine plays them both perfectly with no lag whatsoever.", "What is not of any use to me is the remote hand-held keyboard that's about the size of your palm. I got a wireless mouse and regular size keyboard which I prefer and is much easier to use. A word of caution: Don't install dongles for both a the handheld and another keyboard. It made my screen go crazy moving up and down and all over the place after working perfectly for a few hours. It took me 20 minutes to figure out what the problem was.", "We use an online records system so we need a reliable computer with a lot of speed. This computer is perfect and hasn't let us down. The size is great and can be tucked away anywhere in the exam room. My next computer will be the newest version of this one.", "We have been using it as a HTPC for many months now and have had no problems. The included remote qwerty and mouse unit is pretty awesome and very easy to use, I'm quite glad to be free of the aluminum mac keyboard and trackpad I used to think they were tiny but now they are huge! You know, next to the lenovo unit.", "Very cool! !Amazon made the return simple, dropping it off in the mail tomorrow.", "This software is a fantastic supplement to Windows 8. In a couple of clicks I could make a bootable backup that I could use, plus it would do a snap shot of the system that wasn't triggered by a Windows Update (I realize the functionality is similar to Windows restore points, but a little different and more convenient for the layman). I was really grateful for this tool as it made returning this device much easier - I just made it restore to initial system state (OEM first start).", "This is no more than 2xthickness of my ipad Mini.Would recommend everyone who has a small living space - New York City.Works with my TV - saves additional spacecon: fewer apps than the ipadpros: lot more functional than ipad, + the apps look better on a larger screen. Also like the mini keyboard - kids love it.I would recommend any one who needs a computer that does all the basic things but heavy computing."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,936
I have not tried cooking quinoa yet in my cooker, but I believe that the same ratio of 2:1 / water:quinoa as used for rice, would work; and depending upon the wattage of your microwave 12-20 min. I have a 1200w microwave, and cook my brown rice about 12-14min.
{"question": "How do I cook quinoa in the rice cooker? Time/Measurements?", "document": ["I prefer the method on the back of the rice- 1 3/4 water to 1 c rice- cook 5 minutes at full power and then 10 minutes at 50% power. Rest a few minutes, then fluff. The rice was more tender than cooking the whole time at 70% power.I have also used it very successfully for quinoa- basically cooking the same as the rice.I think it is a great product.", "If you don't rinse the rice, too much of the rice starch will stick to the grains and make for a very mushy, slimy rice.2. For BROWN RICE....the instructions say 10 minutes. NO WAY! It takes a full 30 MINUTES then 10 minutes of rest time for brown rice to cook. The measurements in the instructions are accurate.Follow these instructions, don't expect rice in 7 minutes, and you will be thrilled with your purchase!", "Love it, love it, love it.I had this rice cooker for years (all white), and absolutely loved it. It was \"accidentally\" sold at a moving sale, so I went online to replace it when I settled into my new place. From the picture I wasn't sure if it was the same thing (different color), but thankfully it is! I love the convenience and the rice always comes out perfect. I also cook my quinoa in it and it comes out great.", "I love this cute little rice cooker! It works very well. Only problem is figuring out the measurements; you can't put too much in at a time or water will spill over. Big mess! But the rice came out just as soft and sticky as my electric cooker makes it. I've already recommended it to a few friends!", "We had a 4 cup microwave rice cooker that lasted more than 10 years, until the plastic got so old and brittle it cracked. Was afraid we'd never find a replacement that worked so well. Was glad to find this while searching Amazon. We mainly cook jasmine rice in it, but it will also work for cooking quinoa or bulgar. We usually make 2-3 cups, so have not tested to see if it actually does 6 cups.It's a little tricky to do small amounts like one cup.", "It 's easy to use, clean, and cooks consistently. I use it nonstop.Only suggestion I have is that I wish it included more directions/tables which show how to cook things other than rice (meaning quinoa, couscous, etc...).", "This works well and I even used it for quinoa. Easy to use and clean up. We have a large rice cooker but this is great for small amounts.", "This is the best rice cooker that I've tried. I didn't own an electric one and always used the stove to cook my rice. This makes perfect rice every time. I use basmati rice so I had to do some guess work since that rice is not included in the instruction booklet, but I was able to get it right the first time. It was so fluffy, in fact my daughter said it was the best rice she'd ever had!", "I gave this product 5 stars because it arrived as described, is of excellent quality, provides instructions, requires no set up, and when the directions are followed cooks up really delicious rice as good as if prepared over a burner on a stove top.What I like most is, considering my busy schedule, it takes less than 5 minutes of preparation before I'm placing the rice cooker into the microwave for the 15 - 20 minutes cook time, depending on how much rice you are cooking at that time.", "This my second microwave rice cooker. They are very quick and easy to use. I never cook rice in any other way now. I had my old one for over 10 years. This Progressive model is smaller and has one less lid component then my old one. The second time I used this new one I tried 2 cups of dried rice. I microwaved it for 22 minutes. The rice was still cooked just fine. Some of it boiled over, causing a bit of a clean up."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
31,941
Yes, it has a digital tuner.
{"question": "Does this TV have build in digital tuner? We don't have cable but would like to hook up antenna to catch the local channels...without convertor", "document": ["Very smooth motion, without the blurring you see on some LCD sets. Very impressive picture.The sound from the TV speakers is not great, but I guess that goes with the territory with flat screens these days. You will want to hook it up to a sound system (but don't forget that this set only has an optical digital audio out jack).I would recommend this TV, as long as you do not need to connect many components to it.", "Never exprienced that with my Panny. I could, however, feel the itch...Enter Amazon's ridiculously good deal on this 50 inch 1080p set, which was basically just $100 more than I paid for my 720p set over a year ago. Had to, had to, had to. Met the delivery guys on the porch, ready to get this baby hooked up as quickly as possible. At first, I was disappointed, because the digital cable channels looked about the same.", "I may be biased towards plasma TVs, but the P50U50 looks as good as any set I have ever seen. We have used it for movies, OTA HD, digital cable, and video games, and it has exceeded our expectations in all cases. I purchase for 599.00 w/ free delivery, and feel like it was a steal of a deal.", "I highly doubt you'll find a plasma with a better image for the price. Once calibrated, the color accuracy is quite good, and it's a very dependable, basic 2D TV. No weird compatibility issues, and it easily tunes all the local HDTV OTA stations.However, there are some caveats:1) the lack of HDMI plugs will be annoying if you have more than a few devices to hook up.", "This is a GREAT TV!BUT... Here is the problem:Panasonic has cut back on the number of jacks on the back of the set. There are only 2 HDMI terminals, 1 set of composite video / audio inputs, and one optical audio out. There is also a coax terminal for a cable or antenna input. But THAT'S IT !!! !Come on Panasonic !", "For all the raves, I received a TV that was unusable for watching most sports, particularly basketball- moving players had sparkling halos, picture brightness changing, just awful. Tried all recommended picture adjustments. Two service calls from the local cable provider to insure signal quality, multiple email and forever-phone-calls to Panasonic... finally, Panasonic agreed to send out a locally authorized service person.", "I have been using the TV for about a month. I am very pleased with the purchase thus far. Needed to upgrade my cable box receiver to get the full breadth of HD but definitely worth it. The antenna is strong enough to pull in signals from Boston ( I live in Southern NH) so that's a plus should I decide to ditch cable.It is set up in a room with pretty strong back light during the day.", "Once again though, I will be piping all the video and audio through my AV receiver to get digital surround sound.+ Great picture quality, especially at this price-point+ Easy setup+ USB and SD slots for additional media viewing; though the kinds of files supported is limited.+ The remote control is decent+ Just love the boxCons+ No HDMI cable included.", "This 50 inch set is big enough and the picture is so much better than my old set, I almost can't believe it. Set up was easy, since the delivery man unpacked it and made sure it was working. All I had to do was hook up the cable box. For the price, this set can't be beat, as far as I am concerned.", "I went to a local box store ( B.B.) to buy this t.v., I received such poor service I left the store without it. I was apprehensive to order a t.v. off the internet. Eventually I talked myself into ordering from AMAZON.Today I received my t.v."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,963
Don't buy it is cheap bs buy pioneer or kenwood I have this in my Ford Focus and I absolutely hate it and I'd hate to see it in a Z it's a nice car the deserves quality
{"question": "i wanna buy this for my boyfriend but i wanna know if it fits in his 2003 350z", "document": ["I had bought this for my cobalt and it fits right and works great but a lot of the features won't work and just got a backup cam and it won't work and don't know why... Good for first time in-dash DVD player but I will definitely be up upgrading soon", "The screan did not work as a touch screen it was nor a good indash at all had to buy a different brand.", "exelent m buy , i like quikcy and fast , i wish most discount in the future, but is good , every electronic is fine", "So pissed it was for my work truck, but still a few days is all lasted. Overall just go and spend the money and buy a Pioneer. Piece of S**T!", "The screen arrived broken in the right corner. It doesn't work. I'm form Ecuador and I don't know what to do in order to get the warranty, please help", "Overall I couldn't be happier with the unit, don't knock a product just because of a low price point. It has a niche`, and that's the affordable upgrade to video and bluetooth without a lot of bells and whistles. I'd buy it again!", "Only major thing you need to know is you can ground it to see video all the time! Ground the pink wire to something, not the brake.Only think I couldn't figure out was how to change the display to show the car logo like it said it would in the book", "Great radio but its just too big for my 2004 Impala. The only thing I disliked was the screen quality. Looked really cheap, but otherwise it does everything you need it to.. I would highly recommend this product but make sure it fits your ride before purchasing", "I live in NY, and when it got cold this device started to crap out. While it was warm it was decent. I had some issues in my installation but my main concern was poor menu construction, feature issues, and of course the fact that it broke in the cold. I would not buy another Boss system again. You would think that they would test this for temperatures.", "I was happy to receive this unit before I travel. I hooked it up connected all the wires and when it came time to turn it on, it did not turn on. At first I used the wiring harness and when it did not turn on I just cut the wires from the stock plug. I don't know if I need to do anything else to it. I checked all the fuzes and were all good. So im just guessing that I received a brand new piece of junk."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,982
The thermometer is VERY sensitive. It will give you a precise reading after three seconds. Even at a shallow depth. I highly recommend this product. Best thermometer on the market! You will love it after one use.
{"question": "At times I need to know the temperature of a hot liquid at as little as 1/2 inch depth. How sensitive is the tip of this product?", "document": ["I was pleased that the manual explained that the sensor is in the very tip of the probe and was detailed enough to elaborate and illustrate that 1/8\" is the minimum depth required to obtain an accurate reading.It's easy to dismiss speed but I'll say it's especially nice to get an accurate temp without yelping while losing the hair on my fingers while they linger over a hot grill or in my oven.", "Works as advertised. Super fast readings of 3 seconds or less (in my experience, 2 seconds most of the time when measuring hot liquids, and 3 seconds sometimes more when measuring very cold items of less than -15C). Temperature reading is within advertised margin of +/- .4C if you choose 1/10 resolution. Exact if you choose whole degrees of course. Mine has the backlight. The lcd display has a light sensor that turns on the backlight when it gets dark.", "Purchased as a gift for mom,she thought price was crazy then she used thinks it is best thing since sliced bread,I used in her kitchen wow how great quick and accurate I smoke alot of food I need this for barbeque and smoker and a little baking.If you cook or know somebody that does I strongly recomend this product", "It keeps adjusting to every little change it detects. Only the very tip will take a reading, so you can plunge it into the center of that roast and know you're getting an accurate reading where that tip is sitting.Did I say accurate? Oh yeah, judging by the improved quality of my cooking with it I'd say it's pretty accurate. One of the hardest parts of cooking is getting your food at exactly the correct cooking temperature. Problem solved with this baby. It is also incredibly fast.", "A digital instant read thermometer is a must have in every kitchen. After owning several cheaper models (OXO, Taylor, and braun wands)we were disappointed with how long it took to get a reading and that none seemed consistant. Often times they slowly creep up the tempurature scale with no warning as to when they are done.Immediately upon receiving this thermometer I was impressed with the design. The sensitive reading tip folds protectively into the handle.", "We can cook our steaks to the PERFECT temperature EVERYTIME. I cannot emphasize that enough. EVERY SINGLE time our meat turns out perfect.2. I like to bake cookies from time to time and this device allows me to remove the cookies (after taking the reading)at the optimal temperature for a soft baked cookie. I had to experiment a little because of the elevation that we live, but the cookies now come out PERFECT EVERY SINGLE TIME!Overall, I am extremely satisfied with this product.", "This is the most useful instant read thermometer I have ever had. For one thing, it's fast and second the tip is small so you don't leave a large hole in something delicate. I have purchased several thermometers during the years and they all ended up in garbage. I still have a large digital candy thermometer that I will place in my bottom drawer till I need it someday. This one replaces them all. But be warned that you will still need an oven mitt to take readings in hot ovens.", "Also the sensor is low enough on the shaft that you only need a shallow amount of liquid to pull a reading, however you do have to be careful not to let the tip touch the bottom of the pan which can give you an inaccurate temp. The one thing I DON'T like about it, and why it has earned one less star, is that the auto shut off is much too quick.", "After a few too many steaks & chicken just slightly under- or over-done, I invested in this thermometer. I say \"invested\" because it's fairly expensive. Turns out that it's worth it. It is very sturdy, and the design is smart (although perhaps a little difficult to use if you hold it left-handed). It has three advantages compared to many other thermometers.1. It's very thin - no more massive holes in the chicken breast.2.", "I have the prior model but the comments still apply.Very simply, there are two things to say about the Thermapen.1. A hundred bucks for a thermometer?!2. It's the best kitchen thermometer, with no competition.So, yes, $100 means that you need to be a serious cook to need this."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,983
Not at all. The role rests against the wall on the back side which stabilizes it. I am very happy with it.
{"question": "Do you find the toilet paper slips too easily off the bar?", "document": ["It was thin and did not hold its distance from the wall and holder kept plopping down towards the wall. This meant the toilet paper rubbed against the wall. returned it. As always amazon prime was amazing and I had no problems returning it.", "Quality is great, finish is flawless, and looks wonderful in the bathroom. We ordered two. One for the toilet paper and one for the hand towel. Could not be more pleased.One small issue - the instructions weren't great but after unwrapping all the pieces it was obvious how it went together.", "I bought 6 (plus a spare) of the Hansgrohe faucets and I wanted to finish off the bathrooms with matching towel racks etc. I could not find a 30 inch chrome towel rack - I could only find a 30 inch in brushed nickel finish. So I have been looking at several options. I had ordered this paper holder just to see how well I liked the matching parts before I found out I could not find my towel bars.", "I was so happy to find these beautiful bathroom accessories on Amazon. They are so sleek and expensive looking. We are thrilled. We have the Grohe faucet so we knew these had to be the same quality. They were delivered the following day by Amazon. Thank You for the great service you provide.", "This was for two reasons - the hex screws that hold the paper holder to the mount are then on the bottom and right side - and the opening is away from the doorway. I was afraid someone would snag themselves if the open side was very near the door.So - in thinking outside the box I have a very nice, very different towel holder.-Gerry", "I used my own screws and anchors. This did come with anchors but the screws had a long "no thread" area that would not allow any threads in the drywall area. I didn't take off a star for this - it seems like such a minor thing and it was easily taken care of. Plus it did not affect the final finish in any way.", "I had one white towel holder (ring) that needed replacing to match the new faucets. I kept looking at this as a paper holder but I had it sitting on the sink and looked over at the towel ring and voila! It would fit perfectly and it matched the faucet and looked really good. I got out my tools and in a few minuts I had a square shaped towel holder instead of a ring.", "this hansgrohe holder was pretty easy to install and looks great. The open side of the holder can be reveresed by simply installing it upside-down.the post has a plastic insert that helps add friction to the swinging arm holding the roll. this way it doesn't swing out and back when pulling off the roll (and doesn't bang against the wall).", "We had our bathroom renovated and some of the space got eaten up by what we had put in. This was a huge problem. This product is slim and hugs the wall. It works very well.", "This holder is functional and nice looking. Easy to install and unobtrusive enough to be part of the bathroom ensemble."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
31,987
I just got the item about a month ago. I haven't used it much yet, but some, and so far it has been a good product with no problems. I have recorded to DVR from various sources, and dubbed from VHS, and so far all good. As per your question, it has the following outputs:- analog audio- analog video- component video- s-video- coaxial digital audio- HDMIThe analog outputs are RCA jacks, the others as you would expect.The user manual quotes, "HDMI outputs the video / audio signals without converting to analog signals. No audio connection is required."Having HDMI output means you can connect to many digital devices, but depending on whether the graphics card on your PC supports video capture, you will probably need a separate video capture card.You can get the user manuals here:http://www.funaiamerica.com/support/download.phphttp://funaiport.com/download/download.php?id=3361&brand;=FUNAI
{"question": "Can unit transfer VHS directly to a PC, or does it need a separately purchased analog to digital converter? Is output through RCA audio/video jacks?", "document": ["The unit set up easily enough especially using the HDMI cable. I would have given it another star if it accepted composite or HDMI input from the cable box. Your two choices for input are RCA and S-Video. Modern High def cable boxes will normally at least use composite if not HDMI. Still, the directions to set up were clear and I was able to record directly from a pay-per-view to DVD without a problem.", "The video output is upscaled and looks sharp. It may seem silly but I also like that the buttons are clearly labeled on the front of the unit. Too many new electronics have opted for invisible capacitive buttons that you are more likely to activate by accident than find when you really want to do something. This DVD/VHS Recorder has lots of features and fairly simple to set up. Good value.", "Bought after looking for a simple way of converting some old VHS tapes to DVD and as a replacement player for an older Emerson VCR that I had. First good thing about this unit is that is has HDMI, Component as well as Composite RCA jacks. It comes with RCA chords for immediate setup. Both DVD and VCR players provide a decent picture. Tracking controls for VHS helps get the best picture. Dubbing from VHS to DVD or DVD to VHS is simple.", "My old video tapes have come back to life and are now digitized. I have both video and audio on them. For those of you that don't know you can use a VCR as a reel to reel recorder. Good S/N ratio and reproduction. You get that nice analog sound from your old LP's. The unit is quiet and easy to operate. I ties nicely to my Samsung 3D 60 inch HD TV. A super addition and a bargain. Fast shipping and service.", "I can then erase the DVD-RW and re-format in the Funai and record a new VHS tape. The converted file can be edited then be written to any DVD.The unit comes with remote, batteries, RCA cables (red, white, yellow) manual and quick guide. There is no HDMI cable included.", "The Funai (I had never heard of this brand before I purchased this) seems to work well as advertised. If recording from VCR to DVD make sure that you use the unit to format your disks. Recording from VHS to DVD is a slow process as you record at the same speed as playback so a 1.5 hr tape will take 1.5 hrs to record to DVD.", "I have transferred several vhs tapes to dvd, and it worked very well. The only problem is that the process is a little complicated, and the instructions are not as clear as they could be. It think that once I have done a couple more transfers, it will become pretty easy.Also tried it as a dvd player, and the quality of the audio and video was very good. This is no high end player, but it is fine for me", "I bought this to make dvds of my video cassettes that I taped from tv. It works perfectly. The only complaint I have it that it sometimes make a buzzing noise when I turn it on, but it usually stops after a few minutes. I only hope it can last until I record all of my tapes. The last one I had the vcr part stopped working after a few months. I really love this product. It is quiet and easy to operate. It does just what I need it to.", "i've got no complaints about this device at all. we were just looking for a backup VHS player, and also to get some VHS tapes to DVD -- works great for that, and it's fairly quick too. also, with an HDMI output, that just worked great for our setup.", "I bought this just because I needed a replacement DVD/VHS player. It has a lot more gadgets and functions than I'll probably ever use but it does what I need, which is play DVD's and VHS tapes, and does it well. Only complaint. This model is so obscure that my universal remote does not recognize it so, if I want to watch a DVD, i have to use the remote it came with."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
31,997
You build this out of a bundle of wood parts. Wood frame with one long board down the middle and a set of slats attached to the frame - together these form the top. Then there is a cover over the whole thing. I do carpentry - was not impressed with the pieces - sent it back for a refund. To their credit, they refunded it quickly and without argument. But I recommend a real box spring that you don't need to assemble. We found one online that was a bit more but well worth the difference.
{"question": "Does this box come with a flat piece of wood to cover the slats? If not, how does it support the mattress and not fall through the holes between?", "document": ["Gave this product 2 stars because one end of the center support was installed upside down. Rather than return it I cut the piece out and used screws (after drilling holes) to put it back together. Would not have been usable as received otherwise. Three stars if not for this problem. Sturdy after assembled and works for the intended purpose. Shipping was quick and price was reasonable. Dispite 2 stars I would purchase this product again.", "We have only had this a month or so. But, it appears to do the job. It came in one, long heavy box. Relatively easy to put together. I did, and would recommend as others have, to put wood screws in all the slats. Not just the ones they provide holes and screws for. It seems to make the box completely sturdy and rigid. Again, at this point it appears to be a decent buy for the money.", "I ordered the queen foundation for a Sleep Innovations memory foam mattress. I'll list all of the things most people might be interested in.Packaging - Decently packaged, nice tough double cardboard (This is from DynastyMattress through Amazon). Nothing was damaged.Wood piece quality - Seems very sturdy but lightweight. There was only one slat that had a small split but it didn't affect the structural integrity. Few to no splinters throughout.What's in the box - 6 wood section pieces.", "I thought that the reviews for this product were good enough to take a chance on purchasing it. After all, it was not that expensive and any flaws with the wood, which seemed to be the major complaint, could be hidden under the cover of the foundation. Well, you can't hide the fact that the holes drilled in the end frame do not allow for proper alignment of the side rails.", "This is absolutely a piece of junk. I don't know how on earth anyone can give it 3-5 stars. out of 6 bolts, only 4 fit into the holes, and most of them I had to jam it in. The drill holes do not align and the wood comes warped (not due to shippment, but it comes warped). For a person like me who is not handy, do not even attempt to buy this piece of junk. You will have a hard time returning it.", "The Dynasty Mattress 8" wood box foundation is a good base for an air mattress. However, the wood the foundation was made from was very low quality: it looked like the rejects from the lumber yard. Knots chipped off the rails and had to be glued back in; the cross-slats were warped and required extra screws to hold them down so that they didn't puncture the edges of the bed itself.", "I like this product and it was fairly easy to assemble. It came packaged well and not much to say about it because it's just a wooden structure box and the wooden slats are laid on it then you put on the fabric covering and so far it's pretty steady and it's doing its work supporting my memory foam mattress so I'm pretty happy about that. I'm thinking of buying a headboard from Ikea and just wondering if it will work with this wood box foundation though. I hope it does.", "That meant 33 screws. I used the 6 provided and another 26 to do this. IMPORTANT: I drilled holes through the slats before screwing so I wouldn't split the wood.It didn't take too long and I have a ridiculously sturdy foundation now. I would recommend taking this extra step to anyone capable.", "Ordered the queen size foundation, rec'd in three days. The assembly was very easy and everything fit perfectly. The materials and workmanship were very good. The wood has a nice smooth finish and was straight with no warped pieces. Based on other reviews I did add additional screws to all the slats on both sides and the middle, predrilling rhe holes made it simple. Anyone with simple mechanical ability can assemble this frame easily and quickly. The frame turned out square and fit my existing bed frame perfectly.", "Honestly you can probably build your own foundation using wood purchased from your local hardware store and save yourself about $100-$150.Really the only thing that saved this foundation for me was the cover that came with the frame. It covers the wood and makes it appear as if it where a traditional box spring. However, the cover is really not worth the $100-150 that I overpayed.It was easy to assemble. About 15 minutes with a power drill and wrachet(sp?"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,007
I'm not sure if the eyepiece on the T5i is the same as the T2i or not. so I don't know if it would fit or not. You might give Canon support a call and find out through them. I'm certain that there are those who have taken this extender apart and removed part of the lens in the extender thus eliminating the reduction in image size. I use mine coupled with two other eyepiece extensions that had rubber eyecups because I have a screen cover that pops up so by removing the original rubber eye cup and then installing the EP-EX15 extender and then attaching another eyepiece extension with the rubber I cup removed and then adding another eyepiece extension with the rubber eye cup to that one it gets the rubber cup back to the end of my cover when opened. The rubber cup also rotates so it works for right or left eye use. I use this combination all the time, day or night, without removing any lens from the extender and don't really notice the reduction in image size. Works great on the T2i. If you do not have the flip up screen cover you would not need the last two extensions. Each of these extensions are about 1 inch in length including the large rubber cup. I did remove the rubber cup for the middle extension which does shorten that one by about 3/8 of an inch. If the T5i has the sensors that turn the screen display off when you get your eye close to the eyepiece you might want to consider whether it affects the function of those sensors due to the rubber eyecup placement. The way I have mine setup it does not affect that.
{"question": "Does this extender fit the Canon Rebel T5i? I'm hoping it does; however, I'm concerned about the reduction in image size. Any info appreciated!", "document": ["The Canon EPEX15 II Eyepiece Extender works very well for me. I wear glasses, and when I first got my Canon EOS Rebel XSi DSLR I found that when trying to see the whole image in the viewfinder, my nose was scrunched against the LCD screen, smudging it continuously. Other reviews I've read said the Extender didn't work, or did nothing but decrease the size of the VF image by 30%. For me that is perfect.", "This is the Correct Eyepiece Extender for a Canon Rebel EOS XS. the EP-EX15 will not fit the XS.", "The extender IS a genuine Canon product as pictured, and packed in a genuine Canon box. After reading all the reviews, I HAD intended on removing the \"guts\" like reviewers recommended. However, when I put the extender on the camera - I decided it was not loosing any appreciable view, so have opted to leave it together for now.I do believe it's good at helping keep your nose and face away from the camera ~ hence I'm VERY pleased with my purchase.", "I wear glasses and I have oily skin. Without this extender, my nose would smudge against the LCD and leave oily streaks all the time. With this little jewel, my nose stays well clear of the glass. The image is slightly smaller than the original but also seem a bit brighter. The smaller size image doesn't bother me. For those it does, there is also an modification you can make so the glasses in the extender is removed.", "The eyepiece extender is easy to connect to my T2i. It virtually eliminates the effects of pressing my nose against the LCD screen. I did remove the inner optics by easily unscrewing two screws and then removing the optics and the thin metal retainer. Why did I remove the optics? I found them difficult to adapt to and they changed the viewfinder image from true to not quite true in size. Overall, this product is well worth the money and the shipping was speedy and well packaged.", "It works great! I have a Canon XSI and I wear glasses but I couldn't see the whole frame unless I took my glasses off. So I was either framing too high or low because I couldn't see the edges. With the eyepiece I'm able to see all four sides and the exposure meter at the bottom. Yes it reduces the overall size of the frame as seen through the eyepiece, but it's a small price to pay to be able to frame your shots correctly.", "the description for this part and some reviews state it fits canon full frame cameras.IT DOES NOT.it will fit and work well with a rebel series camera.you also need to remove the sandwiched lens to keep the same perspective.it is well packed and well made.it would be great if canon produced 1 for full frame cameras. this is not it.", "The only thing I didn't like about my new Canon t2i was the fact that I would often smudge my display screen with my nose while using the eye piece. Problem solved! It took me roughly 30 seconds to install this product and it looks great and works perfect. I couldn't be happier. Also, some have noted the needed to remove the extra eye piece lens, however I find that I like it since I now don't have to have my eye pressed to the eye piece to see what I'm shooting.", "The first time I took a picture with my Canon XS, I said \"I'm not liking the nose touching the LCD screen\". I knew I had to find a solution. After seeing an Amazon suggestion, I knew I found it. Unfortunately, I purchased the wrong one! So here's the warning for anyone with a Canon Rebel XS:Buy the EP-EX15 Ii for the EOS Rebel Series! THere is a version for non-EOS Rebel cameras. Anyone want to buy it for $10?", "If you wear glasses (I do) and use one of Canon's DSLR's this accessory will fit....run...don't walk....to your computer and order this outstanding eyepiece extender. It was a snap to install and gives me the freedom to keep my glasses on while shooting without smudging up the rear of the camera (a T2i in my case). I'm very happy with my purchase."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
32,023
They will slot together without the freezer blocks. All of the different items have the same snap patterns so they will fit together multiple ways, with or without the ice blocks.
{"question": "Does the whole thing slot together even if I don't want to use the freezer blocks? Or are they what holds it together? Thanks", "document": ["As stated with my comments with the "Lunch Blox" bag, this accessory works very well with the bag. Since I am on a low sodium diet I must carry my meals to campus and other places. The freezer blocks do a great job of keeping food cool even for the time between lunch and dinner in my campus office environment.", "What a great product as well as fun to use. I ordered three sets of different lunch kits and we are very happy with them. The are easy to clean and easy to store. My whole family uses these for lunch or even snacks for sports.", "The fruit is still cool even that late. The other smaller boxes hold an adequate amount of food items for a noon lunch (often soup carried separately). A sandwhich can still fit above the boxes in the bag. I am expecting that the freezer blocks will keep my food cooled adequately when I carry meals to my grandson's baseball games this spring and summer. I also have room above the containers for a salt substitute shaker and a Mrs. Dash seasoning shaker.", "This like the salad kit were a blessing when I was packing my meals that I prepped according to the 21 Day Fix guidelines. Great for correct portions! I would recommend this to anyone and everyone. No issues with the ice blocks either as others did. When I put them in the freezer, I just "locked" them together and froze them. GREAT STUFF! !", "The two ice blocks keeps your meal cool until lunch time if not placed in a refrigerator. It can only keep your food cool for a max of 5-7 hours. I place the ice blocks in the freezer over night and just snap it onto the container in the morning. All pieces snap together and fits together like a charm.I loved this set so much that i also purchased the sandwich container and the salad kit; which by the by all fit together with the lunch Blox kit.", "I got a couple of these entree kits, a couple of salad kits, a couple sandwich kits and a lot of the little one and two square containers. I had big ambitions of organizing my life one lunch at a time. And the system works very well when I use it. Everything interlocks, the freezer blox work great and, honestly, it's a very well designed system. The containers can go in the dishwasher (even the lids!)", "I've even had friends mention to me how ingenious these containers are. The divider in the bottom container is nice because I can take it out if I want to bring something big, or I can use it to separate different food items that I may not have been able to fit in the other, smaller containers. I would definitely recommend these to anyone who looking for any easy way to carry their lunch around.", "These are a great set. I love how they snap into one another so they stay together. I use them every day. The large container is perfect for holding a sandwich and a small side of something. I don't use the freezer pack but it is a cool concept.", "I got this to use for my lunch and I really liked the container size & blue ice portion of the kit. Everything works the way it is advertised except the blocks that mine came with don't lock together well at all. but it hasn't been a problem at all. At the time I purchased this kit the salad kit wasn't avalible on amazon yet. But I have found this works great for salads quite well.", "(It would be possible for liquids to leak over and get on top of your sandwich though, so I would put dry items in it only - unless you like a slightly soggy sandwich). You could also use it for a salad and just keep parts of the salad separate until you want to put them together. )There are 2 rectangle containers with lids. These would be perfect for things like fruit salad, wet fruits such as strawberries, watermelon, etc)."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,051
No case is included. Comes with one battery. It can be charged (1) using the included AC wall adapter, (2) through the computer USB connection -- cable included, or (3) using the included 12V car adapter. All three of these options charge the battery in the camera. For external charging I bought the Wasabi wall charger with two spare batteries. A great choice that ensures having spare battery charges up and ready to use.
{"question": "What comes with the camera? Case or bag? Battery? Charger?", "document": ["While it lasts for a long time on a charge, in the past our Panasonic cameras have come with a wall mount charger that we just dropped our battery in. This unit only comes with a fly wire and plug in adapter.Would I buy it again you ask?Yes! I'd like to buy several more for our various departments.Happy Picture taking!", "And it was always in its case, not stuffed in a dirty bag. I've owned many different kinds/brands of digital cameras, and this is the first one to do this. Can't recommend this one. BTW, if anyone knows a magic way to get the dust off, let me know! I've tried everything, including high pressure clean nitrogen from a movie camera darkroom. To no avail.", "This means I can't replace the dead battery with a second fully charged one and keep taking pics while I recharge the dead battery in a separate charger. Not a huge issue, but I do miss having the separate charger. Overall it's a great little camera.", "Battery and charging. The Canon requires constant and careful removal of the battery for recharging in a dedicated charger that's never there when needed. By contrast, the Panasonic runs away with honors: you charge the battery while it remains in the camera (a light on the camera illuminates until the battery is fully charged).", "I am very happy with the quality and clarity that this camera produces. At 16 megapixels I can't imagine needing anymore camera strength than this. It also has a 10x zoom that is smooth to operate as well. I love the fact that it came with a rechargable battery with it's own battery charger. I take nice clear, crisp pictures and even the low lighting places seem to take nice pictures as well.", "This camera is so much better than the Fuji I had it's not funny. The recycle time is great. The battery charge lasts. This a camera I use for work so battery life is important. I find if I drive from site to site with an adaptor in the car the recharge time is fairly quick, I still am going to buy an extra battery with a car charger and would recommend that to anyone else. Really have nothing bad to say.", "Battery recharge is via USB connector so many options for charging exist also.The camera comes with software for organizing photos, but that is not necessary to use the camera and download pictures as far as I can tell.I've seen plenty of nice cameras cheaper but this still looks like a really good deal to me.", "Its small enough(thinner and a bit longer then a pack of smokes) to carry in my pocket with all my other crap and not be an issue. Also has great battery life i get about a week or two depending on how many pics. If i am taking lots of pics, a concert or whatever, i get around 150 no problem. It also does a pretty good job with pics. the mp is really great. I ordered the cam with a case logic case, 16 gb memory card.", "this little camera does what it said it would. Get SD card and case and you are good to go1", "The actual camera was good. Had this model in the past and was very happy with it.Not 100% sure though it was new as mentioned in the description, as the charger in the box was not original."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,053
glass
{"question": "What is the glass made of?", "document": ["Excellent mug, made out of heavy glass and the etching is nice too. Purchase you will be happy with it.", "well, this glass is just great in style, well made, and easy to clean. Although it may get yellow when you drink loose tea, put some baking soda will make it like new again. RECOMMEND to tea lovers.", "It's made of great quality, holds 2 cups easily and very easy to clean. I store it with all my Teavana products and use it exclusively for my teas.", "i was using theTeavana Contour Tea Tumbler, 16oz, Purplewhich was a waste while sitting at a desk and too tall and overall not to my liking.so i upgraded to this mug coupled with theTeavana PerfecTea Tea Maker, 16ozand it's a match made in tea heaven (and cheaper too).i like the heft of the mug and the process always makes me smile...pure genius!", "this is a big solid mug, exactly what i was looking for. strong thick glass.", "These are heavy glass cups. Great for keeping the tea hot! Very elegant and beautiful. These are better than average cups found in the stores!", "I've had this for a couple of months now and the quality seems good and the glass is pretty thick. Larger than your average coffee mug I use this mostly for tea.", "This glass appear sturdy and was well-packed when I received it, but after the first time I used it with hot tea, a split was visible in the glass and it leaked tea.", "I wanted to get rid of that funny stuff that clings to some cups........so this is perfect. No problems. And you can pour boiling hot water in the glass without any breakage problems.", "Best mug ever! It looks so pretty with any tea inside. I was a little worried about the quality but when I received it, I was completely satisfied. The glass is actually very thick and sturdy!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,064
No glasses. it's a separate purchase unless there's a deal going on.
{"question": "How many, if any sets of glasses does this come with?", "document": ["Another big selling point for me was well known high reliability of Sony XBR sets. I'll post updates as time progresses.", "I purchased this TV from my local Sony dealer, they did the set up. The picture quality is perfect, I have not seen anything close to the quality. They also installed a Golden Ear sound bar on the top which sounds great. We watch a lot of Hockey, basketball, baseball & football, the picture is fast and clean... Friends are blown away when they come over, and want to order one.", "Until the next gen OLEDs come out, I think LED with local dimming is still the LCD champ in terms of technology. And I feel that LCD produces a more crisp picture that I have come to like over plasma.As a replacement for the Samsung 9000, this TV has proven to be more than adequate. Its better than the 4 year old Samsung in nearly every way. Black level and overall color and pop is much better.", "We upgraded from a wonderful KDL-52XBR4 LCD, as we had no choice but to go with this set as we could not downgrade to a lesser TV after being \"spoiled\" by our previous XBR! We were ready for a larger TV, and had seen other 65 and 70 inch sets locally, but not only did they not impress, their pictures were blurry, bleedy, dizzying, and unacceptable.", "I had also recommended Sony to my in-laws, and my own parents, and those sets are still alive and kicking. The first Samsung I bought 8 years ago, right before the 1080P televisions came out, malfunctioned on me after 1 month of use, and I haven't gone back to that ever since.", "Does anyone buying a 65\" TV really expect to listen to it without external speakers anyway?- The 3D works very well. It was irritating to have to purchase separate 3D glasses when you spend $5k for a TV, but it works like a champ.- I can see how viewing angle could be a problem for some people.", "After applying my Warm 2 settings, I found that blooming is almost eliminated. It's still there, but you really have to look for it.My next update will be about 3d. I am still waiting on the glasses.UPDATE #2I received my 3d glasses, the PlayStation branded glasses, the other day so i decided to give Prometheus a watch.", "I still can't get over the blacks and shadow detail! The lack of motion blurring (nearly non existent) makes watching sports a joy on this unit! 3D performance is outstanding. I opted for the Playstation glasses, they are great and kinda nerdy-cool. Amazon having them for $20 is a super score!", "BobGlasses almost forgot glasses, after researching we setteled on the \"PlayStation 3 3D Glasses\" and I also hightly recommend them, as made for gaming, more forgiving if laying down, and or moving your head. :)(they also fit nicely over my normal eyeglasses), usb rechargable (quick), and fairly long lasting battery life, have not went dead on me yet.", "Still, cannot give it a full five stars, again based on comparison with the previous. For one, it does not have the viewing angle. The remote is a good deal less robust and non backlit. Additionally the stand is not all that sturdy, but does rotate (helps offset the viewing angle limitation)However, why cannot Sony pre-configure the sets out of the box to have a quality picture?"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
32,068
The only time I have any problems with it slowing down was when I didn't put enough blue polish on the pad. I think at that point it was almost a sticky substance. A little polish with some water and not a problem since.
{"question": "How big is the motor on the inside and how fast does it spin? I've read that the JFJ isn't very powerful.", "document": ["For some reason they just aren't wearing down as fast. You will need to replace the sanding disks more often because when they wear, they will scratch the disc on the inside edge instead of buffing as they should. There are plenty of how to videos on youtube and it is easy to learn to use. I have friends who give me discs to save that the little motorized buffing machines can't help. JFJ was a worthwhile investment and is certainly worth the price.", "I've tried several of these CD Repair Machines through the years -- all the cheaper ones, of course. Hand crank models. Small electric models. All with lingering issues and, mostly, tedious to use and not with completely satisfactory results. This is the best unit I've ever used and it's because of the powerful motor and self-contained design.I will not go into all the esoteric accolades and complaints that everyone else has already posted.", "The JFJ Easy Pro is great. It's made well. I've repaired 100s of discs and it works great. Don't spend your money on the cheaper, harder to use repair options because it will be twice the work and you will get half the results.This is the best buy on the market by far. The supplies aren't as cheap as they could be but all you really need is a big bottle of the #2 White polish. You can buy the 800 and 1200 grit sandpaper at good hardware stores.", "Well, they got it half right.I've resurfaced roughly 20 discs with varying results. Bottom line, they all play. The problem I have is that a big part of the sales pitch is that disc will look brand new. This is a bold faced LIE. There will ALWAYS BE TONS OF MICRO SCRATCHES no matter what you do.", "I buy used audio-books from the library and sometimes I have to wonder what library patrons do to the CD's. I've used the Easy pro to clean up some pretty badly scratched CD's and it does work as I expected for a $125 dollar machine. The solutions get used up quickly and be prepared to use some wet paper towels to clean the inside of the machine after each use. So far it has cracked the hub on a few CD's.", "Only very rarely do you want to use either sanding pad.Also, kudos to JFJ on customer service. My first machine had a motor failure after a week. I sent it back, using their tracking slip and at their cost, and they shipped me a new machine as soon as I emailed them the tracking number.", "A great machine that works very well. I've only had one CD that failed to be repaired and when I looked at it closer the label side was damaged. No one can fix that and the black permanent marker trick I've read touted didn't work.", "The JFJ Easy Pro is without a doubt the best machine of it's kind for the money. It will take an unreadable disc and leave it in as new condition. The learning curve is extremely fast. Within minutes you will be buffing and reconditioning discs like a pro. And at under $150, you can't beat it. Although the buffing wheels and the abrasive liquid are somewhat expensive, you can use compatible products from Discmagic to save some money.", "i've only used this machine once and it worked great. i didn't even need to use additional steps to repair a moderately scratched unreadable disc, 2 minutes and my disc was like new and 2 minutes was probably overkill. had i bought this sooner i could've saved more of my collection. i did take the time to read the instructions first, so far, so good. i'll update as needed, if needed.", "Do not use paper of any kind -- not toilet paper or napkins. These are all too harsh and will scratch surfaces.This system is NOT complicated. Everything about it -- except the motor housing, itself -- is built around commonly-available supplies. The Buffing Pads are similar to 3M \"Perfect-It\" pads @ 4-5/8-in Diameter. The Sanding Disks are 3M discs. Even the two polishing solutions are available by other mfrs. So don't feel trapped by JFJ."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,075
It comes with a secure wifi connection.
{"question": "Does this unit com with a secure WIFI connection or does one need to be setup?", "document": ["Modem was easy to set up, compatible with my cable internet provider (just called to activate, very easy), and will save me $8 per month from their rental fees. works great, no glitches or need to reset the modem like with my old one.", "But if I was only buying one or the other I would have not bought this combo as there are better AC routers out there for around the same price.Pros:Once Device For everythingNo power brick!!! !MOCA is a plusAC is fast when it worksCons:Web interface is clunky for advanced settingsExpensive if you don't need both cable modem and router at the same time.", "Purchased this modem because I was tired of paying $7 a month to rent one from the cable company.Thus far my experience with it has been very good although there have been some minor hiccups (although that's not why I'm docking a star off the rating). This connected flawlessly to the Cox network and initial setup was a breeze. The hiccups were my fault and due to a learning experience on my end.", "If you have directv DVRs and have that error, here's how to fix it, at least with the SBG6782. You'll have to give the DVR a static IP and manually set the STB services port #s, then in the SBG6782 I had to 'port forward' the port numbers instead of using Upnp. With the DVR, it doesn't matter if Upnp is enabled or not, you have to setup the port forward manually. My PS3 and Xbox One both work fine without Upnp enabled as well.", "Its a nice little all in one package of a modem and a wifi router. It does its work and signal strength is pretty food in my 1000sqft apartment. It was a breeze to setup. Did not even require a call with the pathetic Comcast customer care.There was hardly any bump in performance though. That would probably speak of my 10Mbps backage from comcast.All in all a good product with quite a few capabilities built in, though most of which would never be put to use be an average Joe.", "I bought this modem from best buy to change out my SBG6580 that the spot where the power cord no longer stays tight. The rep pushed me to get this one since new equipment would need this modem in the future. It would not work with Charter. I spent over and hour and a half with motorola reps that state is should work and with Charter that said same thing. Charter then wants to send a technician out about a channel issue.", "Don't buy this product!... we've had nothing but problems with the unit... we now have to reboot our internet connection at least 10 times per day, and Motorola support has been no help ~ suggesting we keep changing the channel, which has provided zero benefit.", "I purchased this router/modem hoping to take advantage of blazing 802.11ac speeds. Fully aware that I would need to upgrade my network adapters, I purchased an ASUS Dual-Band Wireless-AC1900 PCI-E Adapter for my desktop and an Intel 7260.HMWG WiFi Wireless-AC 7260 adapter for my laptop. So, imagine my surprise when my computer continued to show an 802.11n connection with speeds well below the advertised 1750 Mbps. (Instead it was more like 200 Mbps.)", "Their are four Ethernet ports, and I have my old Ooma phone unit connected to it for free phone service. I put an old Tivo into one of the ports too and it's working fine.When connecting your wi-fi stuff, you will see two options to choose from due to the 2.4 GHz and 5.0 GHz dual-concurrent connections.", "So far, the performance and reliability of this product have been great. Of course, not long after I bought it, news of a newer specification comes to light, ha. But, I think I am going to skip this next one. I really like the combination unit, and I will wait until a new model for it becomes available rather than jumping to separate router and modems as I have always done before. I really like this unit."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,091
Hi, boohornFCC ID Q87-M10IC 3839A-M10
{"question": "can you tell me what the FCC number is on the sticker. I am looking for ver 1.0 router", "document": ["This is the 4th router I have had. It is the only one worth having. Set up was a snap. The router is located in one end of my long one story house. I get a full signal in the garage at the extreme other end of the house and down in the basement through a ceiling/floor filled with water pipes and heating ducts. I simply have no complaints.", "I upgraded from a Linksys G Router and am pleased with my choice.The unit has a small footprint and elegant appearance. The install took a little more time than I thought. Install instructions in the package would be helpful.All you do is plug in the thumb drive and install software and drivers. Open the instructions and follow the easy setup.I did have to reset my cable modem.", "I bought the Cisco Valet plus to replace an aging Netgear wireless router that was starting to balk at [...] and a few other useful sites. The Valet comes with PC and Mac software for installation which I did not use. Instead I used the browser based software which works but does not seem to allow configuration of some of the more advanced features of the product like \"guest access\". Other than that I like the router so far and it worked flawlessly for a month.", "I've been setting up home networks for years and I'm familiar with most of the ups and downs. When Cisco introduced an \"easy\" to configure router I thought it would be a wonderful boon for me and humanity... finally a \"plug and play\" network in which the network configuration can be done at one central location and then the setting effortlessly copied to the other computers. I didn't work out that way.It arrived - I actually spent time to read the instruction (they're brief).", "*NOT* what I had paid for.I finally solved the problems - first, the CISCO Router (formerly Linksys) assigns its IP addressed in a non-standard fashion. This sounds weird - but this works: Turn the Router OFF - restart the CABLE MODEM and quickly after the modem \"POWER\" light comes on *BUT BEFORE* the \"ONLINE\" light comes on - turn on the Cisco router. The Cable modem will then discover a 'new' device and accept it.", "Some modems have a small battery which means it may take several minutes to erase old settings.Compared to the manual setup procedures, the Valet is a piece of cake.After you establish connection, you can change your network name, password, and guest settings.Now the most important feature. Reception.The new router makes a big difference. My home is a 2 story 2200 sq ft home. The router is located in an upstairs corner of the home. I get a strong signal throughout the house.", "This router is extremely ease to set up and get running. The easy setup key USB plug in does all the work of setting up and that's great.", "If you can't install this, either there is a problem with your computer, or you're doing something terribly wrong. Great product for n00bs and experts who don't need a complicated setup or dual frequency router! This is the best choice too, as it gives you the gigabit speed (the regular Valet does not), without the extra price that the E3000 has on it.", "If you know the basics of home networking this is a GREAT ROUTER. If you are asking the Valet to configure you system look somewhere else.I've noticed the prices on these things dropping (and several bad reviews) - it's good hardware. This is basically a strong modern router (circa 2010) but the software, while beautiful, is worse than useless - it can/will destroy your home network.", "I hate having to add more and more software to my computers. It just seems to slow them down over time."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,096
if you have a cassette player, it will work...did great for me!
{"question": "anyone bought this and used it on a 94 chevy s10? wondering if it will work in my work truck. Thanks", "document": ["Broken. Didn't work. Got stuck in the tape deck. Thanks for nothing.", "Bought for my son's BDay of his first car (used) but cassette adapter did not work at all. the cord was thin and poor quality.", "This works great. Now that our vehicles don't have tape decks my wife has brought it to work in her shop. There it gets used all the time. It's been about 2 years since we bought it. Still going strong. Works great with her android phone.", "i use this on our super old family mini van that i take to work. i bought this because i was tired of hearing beiber songs on every station of the radio. had to open it up and flip something on the inside. After that it worked perfectly. wish they had mentioned the flipping step somewhere on the instructions. it only came in a little bag. other than all that, works great. we've used it aggressively the last few months.", "I recently bought a used pick up with a cassette deck. I don't want to pull out the old radio and install a new one in order to use an media player so I bought this item. It does work but the deck in the radio makes some noise so I just jack up the volume and I get good results. All in all a good cheap solution to a problem.", "and you'll be happy with this. I bought a used 4runner recently that has a CD Player and Tape deck but no MP3 hookup. I used this as a solution. It does the trick and is an inexpensive way to get your device to work with an older style stereo system. The tape does make clicking noises and it's very audible. The sound does not come thru very crsip or as loud as it would if you hooked your device up directly through a patch cord or USB.", "Definitely the best tape adaptor for more modern audio devises. I have gone through dozens of these throughout the years. The only one I've found better was the one I bought from an Apple Store, but I can no longer find them anymore.Update on 5/5/14:Three months ago it died after MONTHS of messing around with it for a minute or two to get it to work each time I used it. Lesson learned.", "This product was obviously used, got stuck in someone's tape deck and was pried out. When it arrived, it looked like it had been run over by a truck. Disappointed.", "I have a DROID 2 and a 2000 model Ford F-150 with factory equiped stereo and it works beautifully. Great music quality, the call quality is adequate and there is no background noise. We used the USB setup with the DROID 2. Very pleased I can listen to Pandora in my truck that only had radio and a cassette before this purchase.", "I bought this today and Im testing right now as we speak lol. Works and sounds great. I have the solution to the auto-reverse problem. If you have the auto-reverse problem, simply open the cassette up by unscrewing all the screws. Once inside the cassette, take out the gear in the middle. Close it back up, and the problem should be fixed. Now I can listen to cd's in my 95 Buick Century! Thanks god!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,097
To get the maximum juice for the energy used, fill the upper container (nearly 3 gallons), and adjust your stove to just keep the water in the lower reservoir boiling (it won't go above 212F anyway). With softer fruit (I do alot of blackberries) you can extract more by crushing the fruit with a potato masher after it is partially steamed and softened. Also after you turn off the heat, some juice will drip into the collector as the fruit cools. Do consider that crushing fruit will result in a few more seeds in the juice if they are small enough to get through the collector holes (but not all that many). Keep an eye on the drain hose (it is clear) and when you see the flow is just drips, turn off the heat and let it cool (usually about an hour depending on fruit). Then tip the cooled collector section toward the drain opening and the last juice will drain into your container (a gallon wine bottle works well).
{"question": "how to decrease steaming time", "document": ["After doing a considerable amount of research I chose to buy this product and do not regret doing so. It's perfect for steaming your fruits and looking stylish at the same time. No issues so far, have made a couple gallons of apple juice so far without a glitch. Would recommend to anyone.", "This steam juicer is very well made. You do have to watch out that the water doesn't run dry when you use it but I had no problem steaming grapes and pears to make wine. It is another fruit season and I am looking forward with doing more with my steam juicer.", "I have tried jelly and liked it a lot.Couldn't be happier with it and would like to try other fruits and even steaming meats or veggies and I'm told the resulting water that drips down could be used as a broth or stock for soups.", "I bought this last summer and have been using it for making grape juice and apple juice. It's also great for making soup stocks, steaming food in or even making essential oil hydro-sols with mint plants. Great steamer, good price, good product", "I added fruit as it processed (you can add sweetener on top if desired)- It was an all day process since I had so many apples. I will definitely try this with other fruits, even mixing some. None of my friends had heard of this processor either and they too are excited about how useful it can be for juice and also for steaming vegetables.", "First time I have steamed fruit to make jelly. This made it all so easy. It is not only beautiful to look at but easy to use.", "good quality, and works entirely as advertised. Although it has such a narrow use, I've been wanting one for a long time, and am thrilled to have it.", "I have never had a juicer before and so far I love this one. It was heavier than other reviews had led me to believe and as long as I take care of the juicer it should last me a long time.", ")Users are left to fend for themselves with this, and I guess for most people that's OK. I was looking for more specifics.ALSO...this steamer does not come with a glass lid, which seems to be essential for determining when processing time might be nearing completion.", "Great product. I have been saving for a long time to get a juicer and wanted to make sure it was the right one before I purchased it, so was a little nervous at first. Couldn't be happier with the results. I think I made the right choice for my needs."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,133
The input voltage from 100-240V.
{"question": "what's the voltage range for this product?", "document": ["A charge, can be used continuously for one hour. Suction of normal and max, because the motor power problems, suction is not large, but adequate. Dumping more practical function. I do not know whether the filter dust and supplies sold separately? Universal voltage 110-230V.", "will never buy again their product.", "Very good product -- easy to use! Battery somewhat short; but, I was aware of that that prior to purchase.", "It is a good product. However, i find it over priced. You can get three other brands for one third of the price.", "Excellent suction. I had a different brand before and it was worthless. This one does a great job, good product", "Dyson makes a great product!This vacuum is so handy and compactIt charges quickly and can access the smallest areas", "very convenient for small jobs. good battery life. such a good product that I bought one for my daughter. she loves it", "This is a great product. Yes, the battery doesn't last as long as you'd like, but when do they? I would recommend this handy vacuum to anyone.", "It is working well again and I was happy that Dyson came through and stood by their product. The woman I spoke with was very friendly and helpful.", "It's great for small jobs, the car, the door tracks, and upholstery. It is light and easy to carry around. Really a good product."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,136
Yes it does. It just has an adapter piece for non USB plug ins.
{"question": "Does this mouse plug into a USB port?", "document": ["Point and click, click and drag, it is easy for her now. I love it because it's plug and play, and the computer recognizes it within about 3 seconds. The mouse seems durable, and gets plugged and unplugged from the USB every day with no problems. Happy kid and happy parents!", "I bought this mouse for my two year-old. She'd used one like this at our local library, and it seemed more ideally suited to her small hands. I like the size and long cord. She uses it on our laptop, and it plugs right into the USB port, but it also comes with a different type of connection to a desktop (like older mouses).The one button feature is great, so she doesn't get confused.", "My son loves it! In the world of touch pads and things, I wanted to make sure he learned to use a computer, too, but couldn't manage the adult mouses with 2 buttons. He loves his mouse and uses it well. It was easy to install, came with USB to PS2 adaptor if needed, and works great.", "Easy to just plug in and use. Nice that there's only one button to click - easier for young children to understand. Nice size for little hands. One thing to remember is there is no right-mouse-button so parents need to find other ways into menus that they're used to getting to via right-mouse-button.", "We bought this mouse for our 2 year old to help her as she did an online preschool with her mom. It's really easy to plug in. We especially like that we can still use our main mouse while our toddler is using hers just in case she needs a little help with more controlled movements. It's easy to click and it didn't take her long to figure out how to drag things when necessary but sometimes it seems a little laggy or as if the click doesn't quite go through.", "She loves having her own special mouse!", "The mouse works well, and is quite durable.", "This mouse helps her be fully self-sufficient on her games.", "Bottom line, the mouse works well, she's just not ready for it. So for now, it's sitting in my drawer.", "In another year or so, he'll be pushing this mouse around with ease. This is a great purchase."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,192
No. They are not long, but very short. They are like light, thin ribbons. They are only good enough for thumb/flash drives. You can barely get them over your head to go around your neck. I do not recommend them for anything. For a camera, you would need a full-size strap designed for it.
{"question": "Are they sturdy enough for a full size camera", "document": ["They work well for my flash drives. Material seem sturdy enough for it's purpose too. It's a pretty basic neck strap, but it works and is defenitly long enogh.I ordered another set recently, they are shorter- but still acceptable", "I dropped my digital camera and broke it. I vowed never to use the strap for the wrist because it is not secure enough, since it can just come off. These long neck straps are the ideal solution for someone so clumsy like me. I prefer to pay $5 for 5 NECK straps than have to purchase another digital camera for $250!", "I needed to get a few lanyards for the several thumb drives being used by us at home and for work. Can be used for camera, mp3/4 or Identification. Having a lanyard makes it easy for me to find the drives especially since some are so small. The lanyards are durable and sturdy and I have taken a silver permanent marker and written on the lanyards to differentiate the drives. There is a detachable clip connecting the neck portion from the lower part for convenience and easy separation.", "Its a good lanyard for its price. Holds everything from badges to cell phones sturdy on your neck with the removable clip.", "For the money, it keeps those tiny drives visible, and away from the pockets and key chains.Not strong enough as a lanyard, i.e. knives, guns, or ID cards.", "I was pleased with the camera lanyard. My only complaint would be that I wish it were about 2 inches longer.", "It works, but it has a metal pice holding everything together that I fear will scratch my camera, so I'm not using them.", "THe quality is a little lacking for a camera strap that long.I was hoping that it would be sronger.It just needs to be constucted better. Thanks, RandyH.", "My family uses this to hold our camera while traveling to various places. It's hardy and has made camera use a lot simpler for those times when you could have missed a shot because the camera was in its bag.", "It is hard to find a lanyard for a flash drive in any store unless it comes packaged with a product. This lanyard is way too short to call it a \"long neck strap.\" It is not 36 inches full round length as described here, even though that is what I ordered. It is about 28 inches full round length. I can barely get it over my head and around my neck."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,193
I still like this desk. My MacPro laptop has been on the tray for a year or two now. My printer is on the top of the desk and everything is very convenient. I keep extra paper on the shelf underneath. It fits conveniently in a small space. I can close my laptop and slide the tray underneath, but it doesn't go in all the way. But all things considered, this is a great desk.
{"question": "Anyone use a laptop on the pull-out tray? Is there an issue with sturdiness or the tray sliding during use instead of being stable?Thanks!", "document": ["I bought this to use as a printer cart for a large, heavy professional graphics printer I have. And it does hold the printer (on top) just fine but it's taller than my desk so it looks weird to have it in my small home office area. Perhaps if it's used on its own, that would be a non-issue. My only other comment is that some of the pieces arrived with visible damage - and not due to shipping.", "This desk arrived promptly and I found it easy to assemble. A 2nd person helps. It's a nice piece of furniture for the money. The fact that it can roll around on sturdy wheels means I can use it in various places of the room. The finish is nice and I find it more appealing than a typical all-MDF or particleboard veneer product which this is not. There are a couple of minor flaws in the construction but nothing that sacrifices the sturdiness or functionality.", "Came with a damaged roller on the desk tray. Company is very reasonable to deal with and sent replacement parts out. Rolls very nice. Looks great. Hinges are stiff on keyboard tray so hard to close. Good solid construction and ease of assembly.", "Very nice product for the price. All wood materials that were relatively easy to assemble. Designed for a computer tower with adequate room for a printer and paper storage. It has a tray for pens, pencils, paper clips, etc. inside the keyboard tray. The top surface holds my 23 inch all-in-one comfortably.", "Had to fill out a couple forms and e-mail them in, then about 3 weeks later got the replacements, along with a fairly rude note about how I hadn't been verbose enough in my \"description of the problem\" field on the form. So the replacement keyboard pull out when I tried to put it in was a full half inch longer than the part that it was replacing!", "- the height of the top and keyboard are a bit above the norm, but shouldn't be an issue for average height users - i'm 6ft 3in tall, and for me, it's just about perfect - all in all, a good value.", "The GoodStylish, Sturdy, Casters make moving it around and hooking up the computer easy. The directions were clear but pay attention where the holes should be for the shelf. Packaging was good, couple of dings on the wood but they seemed to be in places that can't be seen.The BadThe keyboard tray needs help. The drawer rails are horribly weak and there is to much play which makes the drawer difficult to open and close. Also most keyboards won't fit because the tray surface isn't deep enough.", "This is a nice solid and attractive cart. My MacPro fits on the pull-out shelf and I put my printer on top. The pull-out shelf is just the right height for the keyboard. The little space on the side bottom is the perfect size for my purse, and I keep printer paper on the other side. Everything fits nicely, and best of all, my Roomba vacuum can roll underneath it! No dust bunnies!", "There's a couple of little cubbys on the pull-out shelf where I can keep track of pens and memory sticks. It just does everything! The ONLY thing I wish is that I could close the pull-out shelf with my Mac on it. I can push it in a lot, but not all the way. When I want to put everything away, I just set the Mac on the shelf. Wheels are a great bonus for a computer table. I am VERY happy with it.", "Wood is solid and attractive, but it arrived chipped in places. Size is a problem - it is 32 1/4 inches high, not 31.1. Because I'm just over 5', my feet barely touch the floor when I adjust my chair to use the keyboard comfortably. Even then, it's too high to use for any length of time. Fortunately, it's for my home office, not for full-time use."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,223
Yes you can, it is an auto action if your sound bar is Samsung, and your TV is also. But if not just hook up to your HDMI in on the TV and HDMI out on your sound bar. Or just as easy HDMI 1 or 2, to HDMI 1 or 2 on each device.
{"question": "How does the HDMI in/out work on this? Can you hook the source with HDMI into the soundbar (for audio), and then pass video through to the TV?", "document": ["Works great, but the optical audio output is dead. Since my TV only has 2 HDMI ports (both being used), I had to resort to using the stereo audio output. Still works fine enough for my needs, but a little disappointed. That's what I get for getting a refurb.", "This goes along with my recently purchased 50" TV. Still in the process of installing but seems to work fine.", "Makes a huge difference in the sound from my 75" Samsung LED TV, but it was kind of unclear the best way to hook it up and still have just one remote to operate the TV, sound bar, and DirecTV receiver. As it is, we still use the sound bar remote to adjust the volume..", "5,000.00 worth of sound for 170.00 I am still trying to pick pieces of ceiling out of my hair from having my head blown off. I gotta get a new TV to go with my Samsung soundbar.", "I purchased this soundbar to use as a replacement for the speakers on my Samsung TV. A fancy surround sound setup really doesn't appeal to me; we mostly watch TV shows (comedies and a few dramas) that don't require much sound immersion.", "I bought the Samsung subwoofer to ensure compatibility and easy set-up with my new Samsung LED 55" Smart TV. So far regretting both Samsung products! Samsung soundbar not recognized by Samsung TV automated set-up tools! So, have to manually set-up - a very painful process. Further, Samung subwoofer that came with the Samsung soundbar is not recognized by the Samsung soundbar!", "When turning on my PS3, the sound bar changes on its own from HDMI to Digital In. I have to cycle through and select HDMI again.", "Very easy to hook up, no scuffs or anything. Works as promised at this point. Our living room in our new place is set up a little different, and its a rental, so I didnt want to hassle with wires and putting all the speakers in. This is getting the job done.", "The problem with those is they only had red and white cables no hdmi or optical. The samsung soundbar lets u use it for all your devices.", "Samsung HW-FM45C/ZA 2.1 Channel 280-Watt Soundbar - Manufacturer...is't very good design and pepect soundnow .... my life happly"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,268
Hello Courtney, we bought chairs from another store. They are similar to the one I've seen on Amazon.
{"question": "Do you have a link to the EXACT chairs that match this table? There are a couple different colors but I don't see one with \"Dark Cappuccino\" Finish", "document": ["The table looks great! We are so pleased with how it looks. Our dining room finally looks like a dining room. The storage unit is a lot bigger than I thought it would be. We purchased different chairs than the picture but were made by the same company so match perfectly.", "The chairs are very sturdy...I'm a big guy so there was a little concern about that but no issues so far. We love the Cappuccino finish but be warned, it can scratch fairly easy. We went to a local fabric store and purchased a mat type fabric (black) which we cut into the shape of the table. It actually works real well without taking away from the look of the table.", "In early October, I ordered a table and received it in a timely manner. I love the size, shape, the dark cappuccino color (beautiful!) and the fact that it has an extension leaf. However, as I had a new kitchen floor installed yesterday, I did not open the box until this morning (just over 1 month later than my original order).", "First, let's talk about the table and chairs we ordered and then I will talk a little bit...maybe alot... about the order and shipping process. We were excited to see this table and chairs on Amazon. We have a little eating nook off the kitchen and this table is perfect for that spot. We had been looking for a similar table for weeks including venturing out to several local furniture stores.", "My wife wanted this table after about a month on the search through about 30 different tables. 1. Table does not han an understorage door as shown in picture. 2. I puth the table and chairs together in about 2 hours. 3. I ordered this table in september of 2013, and My table arrived separate from my chairs with no damages, but did have to call the company. 4. table and chairs are sturdy for the price you really wont find better. 5.", "1) How close are the two halves suppose to line up a) if assembled in the factory or warehouse b) after shipping? I have a table cloth so it does not matter to me but Coaster may want to stain a bit more so any misalignment does not result in a different color showing itself.2) I did not use all of the hardware provided because at some places, when one bolt is already installed, it gets in the way of installing another bolt.", "Great table at a great price. The negative reviews all seemed to be from a different supplier than the one Amazon is using currently. The table is high quality, it came with all of the appropriate pieces, was easy to put together and looks fantastic.", "Because I like this set I decided to keep it and look local to see who had another one. The box came danger and some hardware was missing. The instruction were wrong for putting it together. I didn't want to go through the hassle of returning it and getting an another. I just paid for the addition hardware that was missing and got the correct instructions of putting it together. This is the first time I was not please with the condition of the delivery and product.", "I orders this dining table and four matching chairs. They were all packed incredibly well, and nothing was damaged and no missing parts.My husband is experienced with these DIY assembly projects; he was able to assemble this 99% on his own-- I had to help with one small part of the process. It took him over an hour, but less than 2.It's very solid and looks much more expensive than it was.", "We liked the fact that the table also had an extension piece in the middle to give us more space when needed. However, we are happy with just the \"normal\" size without the extension. Putting together the table and chairs was no problem. Actually, the chairs were a bit more challenging than the table. All four chairs took me about three hours and the table about one hour. The hardest part was unpacking it all and finding somewhere to dump all the cardboard, bubble wrap, and styrofoam."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,289
The microphone is not the best quality, several of ours stopped working after just a few days. But the earpieces and the radios were still well worth the purchase.
{"question": "Does the ear piece come with a microphone to talk into?", "document": ["We have had these for over a month now and they work well. We bought them for keeping in touch on the property and at the ball fields etc. They are kid friendly. The battery life is a whole day at least of continuous use and 2 days with light use. They talk to you and tell you which channel it is on and when the power is low. You can use the ear pieces... or not.", "We ordered 10 walkie talkies for our staff. We operate a large testing lab, where we need to stay in touch. The ear piece is a little uncomfortable, but better than I expected. The sound quality is good and the units appear to be well made. I expect we will receive years of serviced from these walkie talkies.", "I've been using these radios for almost a month now in a ministry setting. I ordered 10 to start, just ordered 5 more. I love them! Great build quality and easy to use. I wanted something that was hard to mess up, dials for power and channels help achieve that simplicity. The ear sets that come with the radios aren't great, I ordered different ones, found one stopped working well the first time I used it. Over they are a fantastic radio and the price is great!", "We purchased the radios to keep in communication when setting up and orchestrating a fireworks show. The radios were great, we were able to speak with each other and hear each other regardless of the noise around us. While the MC was speaking I unplugged my headset and turned up the volume and everyone around me was able to hear the speaker through the radio. We had the speaker keep the mic open on the radio so the crew in the back could hear. The ear pieces work great.", "I purchased these a few weeks back for our church worship/media and ministry teams. I purchased 10 total and ordered the clear earpieces produced by the same company. The earpieces that come with them aren't worth it. That's why this is a 4 star review. But other than that, no problems, yet. I've been a bit skeptical about these but we'll just see. They work well. Started using them right out of the box. I think these are perfect for single building institutions/businesses.", "professional quality: loving it", "You cannot beat this deal. Purchased for supervisors in a bakery setting with concrete walls. A little skeptical at first but after we implemented them, the result was phenomenal. So much that we purchased another set of 5. Great product!", "We've had other walkie talkies in the past, all supposedly with great range, but this is the first one that delivers on that promise. I bought them for road trips. I have my in-laws visiting from Germany and they would not be able to call me using their cell phone when we are in two different cars driving somewhere. I don't want them to get lost and so the idea of buying walkie talkies with good range came to me. I tested the range recently and was really impressed.", "We use the radios 7 days a week and Will need more time to see its performance. A little to early to tell.", "These walkie talkies are perfect for our application. Very easy to use. Durability seems more than satisfactory. Would purchase again."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,334
You can can closer, but autofocus will not work. None of the lens-changing controls work when this "dumb" tube of metal is attached: no aperture change, no autofocus, no image stabilization engagement. To get these to work, you must buy a "smart" extension tube: the one's from Canon that cost twenty times more.
{"question": "Can I use this extension tube with 55-250mm lens to get closer to shoot a sporting action? 55-250 is not enough for me to get the closer look of sprt", "document": ["I recently got the 55-250mm Canon lens for Christmas, and I love it. However, I can't get close enough to things for macro photography, so I did some research, and came across these extension tubes. I was skeptical at first because of how cheap they were, but I figured I'd give them a try.I absolutely love them.", "I have tried the extension tubes on my 3 lenses. It worked amazingly well on the 18-55mm kit lens and also ok on the 55-250mm zoom. I have taken some of the best pictures of my life with these. I tried it on my fancier Sigma lens and couldn't get the macro effect without actually touching the front of the lens on the subject.", "I have read some comments given by some costumers how good this thing is but at my house it is worthless metal. I have tried to use with my 55 mm lens, some how it doesn't work. it makes my view completely blurry. I tried to call for support to see if I miss some thing, but I never get a hold of fotodiox customer service. so now this extension tube some some metal which have no use.", "I use them on my 55-250mm lense. I have to manual focus, but takes some really good close up shots.", "Two things you need to know before even THINKING about buying this:- You are forced to shoot wide open (ie f/1.8 on the nifty fifty)- You are forced to use manual focus (you shouldn't be using auto-focus on your macro shots anyways)Now, what you need to get the most out of this macro extension tube:- Lens with dreamy aperture: When you shoot with this macro extender, you'll be shooting wide open.", "I read few reviews about this product and then ordered it. I have used it with my canon with 18-55mm and 55-250mm lens. Considering the price it is an excellent bargain. You cannot use autofocus and aperture control. Aperture is manageable once you set its value, use DOF button and detach lens at the same time. It leaves the aperture there. I took pictures of icicles from window, in daylight, handheld across the window glass. It gave me marvelous results.", "This is a must have for anyone who wants to start doing macro shots! It's super easy to set up (it's not hard to take off the lens like other people said) and it takes AWESOME pictures. Works great on my T2i.Works best with my 55-250 telephoto, as i don't have to get as close to the subject to get the shot.If you're just using the kid lens (18-55) than you'll have to get really close.", "3) Take off the lens a look at the back of it. You should see the blades closed. 4) Mount the lens to the extension tubes and then the extension tubes to the camera. You can now shoot.The only downside I see is that the threads on the tubes seem to be a bit fragile and if one was to constantly take the stack apart, he or she might end up stripping the threads at some point.", "Got the shipment on time. Tried the tube set and it is very good. I have Canon T2i, and I tried it with 50mm 1.8, 18-55 and 55-250. Got best results with 55-250 as with 50mm its very hard to focus due to very very small DOF. Very happy with the set. Will upload few test shots. I just hope adding the electric contacts would have helped as setting the aperture is little painful with the DOF Preview trick.", "It took me a few minutes to figure out why on earth all I could see was white... I knew the thing must work based on all the great reviews. Um, get closer to the subject, dummy! :-) I wasn't close enough to actually see anything.This works nicely with my Fotodiox Lens Mount Adapter (Minolta MD, MC Rokkor)and since my old school minolta lenses have the aperture ring I have some flexibility."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,345
Yes in our office we use VOIP phones with multiple lines and the phone works great. I have also used it in one of our outstation locations with just two lines and it worked great.
{"question": "Will it work in an office with multiple phone lines?", "document": ["A small transmitter plugs into the wall, the phone line cord goes into the transmitter, then turn the ClearOne Max phone on snd ...BAM!!!. You've got a wireless conference phone connection ready for prime time!", "I have one in my office. Works like a charm. Holds a charge for days and provides wire free audio conferencing. This is a solution to a problem I've had for a while. If they were IP instead of analog, I'd be even happier.", "Pro - The Clear One Wireless Phone works as expected. This is the third Clear One I have bought in the past three years. Each one has meet my expectations.I received the product sooner than I expected.Con - None at this time.", "The ClearOne Max conference telephone has poor sound quality when compared to Polycom products. Voices are thin and hollow sounding. I purchased 2 of these units and one was full of static - defective.The only positive about these conference telephones is that they are half the price of the Polycom.", "I am a consultant with small to med-size corporations. This has come in so handy. Reasons why? 1) Portability - no need for it to take up space. 2) Less accidents - no wires to contend with while hosting your at a meeting/presentation. The only time it's connected is while is charging which can be overnight. This unit has lasted through at least 3 hours of conference call time, not to say it couldnt last longer."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,347
Hi, Jerry! The manual says to use speakers "with an impedance of 8 ohms or more." The speaker connections are not RCA, they're bare wire connectors with a screw-on type fitting. I hope this helps you out. Good luck. By the way and for what it's worth, we've enjoyed our amp and it hasn't disappointed us at all.
{"question": "I have bose 201 speakers that are rated 4-8 ohms. Are they compatable . Also are the connection RCA?", "document": ["I ended up configuring an external A/B selector switch that maintains 8 ohms even with both sets of speakers selected. Along with a stereo L-pad for the more efficient pair that I was using before, the balance is just fine.", "I'm really happy with this, i was looking for an inexpensive replacement for my Technics receiver that died very dead. I mainly listen to music with AirTunes, playing wirelessless from my laptop to my Airport Express which is connected by cable to the receiver. I have some 8 inch two way Bose bookshelf speakers.", "I'm no audiophile but this sounds really good to me and it's cheap. I paired it with some sony tower speakers I got on clearance at best buy and plug an xm receiver into it. The combo was cheaper than my bose radio and it sounds a million times better. Also it's got 2 zones so I wired some outdoor speakers to it as well.", "To be fair, with the exact-same EQ and 8-ohm home speakers, I also killed two Sony receivers, a JVC, a Pioneer and of course the original Onkyo. I had to go to a dedicated amp/pre-amp component system.If you're looking for a solid, useful receiver at a reasonable price and don't listen at the north end of the dial for 6 hours at a crack, you'll be satisfied with this unit.", "The Teac AG-790A is a great budget receiver. It being used in my office, attach to 4 ceiling speakers. The sound is decent for the office use. The loud button increase the bass response in low volume. The binding post allows for banana plugs, so it's easy to connect to the speakers. I also hooked another set of Polk Audio M30 speakers. There's a speaker A and B switch. So now I can also enjoy music in my private office too.", "I have had this receiver for about 6 years now, and it is tried and true with nearly daily use. I use this in my office hooked up with two old technic speakers. I only use it for one thing mostly, listening to records. This receiver is inexpensive and has a phono setting for Vinyl listening. I also have it connected via dual RCA connected to my computer, so I use it as computer speakers as well. For what it is, this has been an excellent receiver and very dependable.", "I just installed my TEAC AG-790 amp along with two sets of Polk Atrium 45 outdoor speakers and 16 ga / 4-wire speaker wire. At present, I'm only running the system off my XM satellite radio. The speakers are under the eves on my patio and the sound is really clear.", "I bought this unit to replace one that died recently - I chose the Teac because they have been around for a long time and have always set the standards in recording equipment - I use the receiver in a small room and power 4 large 3 way box speakers - I have over 1200 LPs (records or albums for you that grew up in the age of CDs) on vinyl and spend a lot of time listening to my music. Therefor I needed the phono input. The sound quality is very good.", "I am age 53 (in 2009)- a child of the component stereo age- and I like it that way. I did not give up my albums... I just added CDs. This TEAC AG-790A Stereo Receiver w/ built in AM/FM tuner does exactly what I want. 2 channels- both left and right of full 100 watts each- That's 4 speakers; CD & Cassette deck inputs; an auxilery input; AND (here's the biggie) A PHONO INPUT!!", "I split the receiver output and feed the outgoing signal to another small receiver (this is my volume control for my outside speakers) and also to my computer so basically anything that plays on the receiver plays to the computer and anything that plays on the computer is fed to the receiver - this is great for recording and playback."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,348
no this item its in the opposite way , but you can find a device from HDMI to RCA
{"question": "Can you connect a device like ChromeCast to an older TV with no hdmi inputs?", "document": ["I purchased this unit to hook my older systems up to my LED TV that only has one AV input.Pros: It works like it is intended. On one side there is the Yellow/Red/White RCA inputs and on the other side there is an HDMI output. Unit also requires power and it comes with its own AC adapter. Don't think the output is going to rival that of a Blu-Ray player or an 360, but it looks alot better than just plugging it in.Cons:None", "Works like a charm - used it in an RV between an older Jensen FM/DVD media player w/composite outputs (480) and an upgraded Vizio flat panel LED TV (720p); powered via the TV's USB port. TV recognizes 720p input - noticeably clearer picture from the DVD player (through this device/HDMI cable) than I previously had (although the TV has been replaced). Small and lightweight, just dropped it in behind the media player in the RV. Happy Camper...", "This device does not convert a/v to hdmi. I got this for the new xbox one to connect to my cable box and when I connected It i recieved no picture.", "Lots of people like myself have older devices such as VCRs and DVD player/recorders. The newer television sets may not support these devices so, this product bridges the gap very nicely allowing you to connect these devices via the HDMI ports on the television set. It works great and the picture quality is sujper clear evgen on older tapes.", "Bought this to use some of my older components like my VCR and game consoles with a new HDMI TV. It works fine for the VCR, but it wouldn't work my Wii or my Xbox. It seems those devices need their own "special" adapter.", "My kids have a Wii and old Xbox I just got them a new LED TV for their bedroom and it didn't have RCA inputs just like many of the newer TV's today. This allowed me to easily plug convert the RCA to HDMI. I also purchased a 3-way audio video AV RCA Switch Box Splitter that made it much easier for the kids to switch between systems. Quality is very good.", "If you still have old device such as, video/game player, video camera, TV digital converter and want to connect to HD TV that has HDMI. This is for adapter. It works good, easy to install.", "I needed a TV to input both component and composite video. They no longer have separate component and composite inputs. All the sets today use a shared component/composite input meaning that only one device can be connected at a time. I decided to use the shared input for my component video device, and then to convert the composite video to HDMI for the second input. I connected to the converter, and was very pleased with the results. If there was any loss in the conversion, it was very slight.", "I was looking for a device that I could plug my Blu-ray player into and then use the RCA cables to the back of my TV...yes, I have an older TV. This items goes in reverse of that. In other words, this is RCA "IN" and HDMI "OUT." You can't toggle for it to do the opposite. I still have another use for this item so it wasn't a total loss.", "This box delivers what I was looking for when connecting older consoles to my TV and upscaling the picture. I hate AV component in my TV as it generates a very loud noise when idle and this helped remove that problem entirely. I have not encountered any noticeable input lag when playing my games using this device and it is very easy to set up, contrary to what a few people have stated about the product. The main gripe I have with this product is the packaging."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,382
The volume button on the left side you push it in lightly. I had a issue with the screen not lighting up after i had mine off for a while. Unplug it, plug it back in give it a second and then lightly off that button in. worked for mine.
{"question": "How do you turn it on, once it is turned off? I cant seem to turn this radar on after disconnecting it for 2 months", "document": ["If we forget to turn it off, we have it set to go to sleep after 2 hours. But sometimes we will be on a long drive and it will just go into power save after 2 hours on the road and need to be turned back on. But, that's minor, and may be a problem with the outlets in our new car. This thing functions great and has saved our butts several times.", "I got this detector about 2 months ago. Since then it has saved me a couple of times from radars.I think it is not so good when the signal comes from the back of the car. Im some city areas it detects a lot of signals, false alarms but I preffer it instead of being catched speeding. It has helped me to be aware of the speed Im driving everytime I hear the radar alarm, real or not. It is not the best but is good for the price.", "I bought this 2 months ago, works great. Dependable range, strong alert, good options. Have recommended it to friends. A good unit in the middle price range. Thanks.", "I was always a beltronics fanboy until my last high end unit an rx65 pro. after a few months it started getting flakey, pop alerts and laser alerts when the unit was turned on in cold weather. when driving into the sun the laser alert would go off constantly.", "I don't mean a little bit, but a lot. I have everything turned down as far as it will go. As in, city 2, filter 2, etc. Which helps some, but this thing will drive you crazy if you don't dial it in right away. Pretty much just went off 85% of the time, sometimes other cars would set it off. Or large box type trucks going by would trigger an alert.", "I checked many internet sources before deciding.During XMAS 2010 I drove around 20 hours back and forth, including states such as GA, SC, NC, VA, DC.On the road, not many false alarms... figured filter 2 works nice to eliminate interference. A cop coming from a rest area triggered KA band with voice and frequency display, enough for me to slow down a bit. When crossed to VA, I turned it off and moved it to the trunk.", "I bought this radar detector in May and it worked fine for about 4 months and now for the last 4 months the speaker has decided to only work when it wants to, I travel a lot due to work and just have this to keep me reminded about the speed limit but it is no help since I have no idea when it is detecting a radar or not.", "I have the pro 78 and the new pro78se doesn't even come close to the performance of my old one. will not pick up road side radar signs. ka band has about a 2 block range. I might as well not even use it.", "I have been a fan of Whistler Radar Detectors for a long time. I have owned 5 going back several, several years. Police get better equipment, we get better equipment. Well, I can say starting with the Pro 68SE I had that things are going downhill for Whistler. The speaker in that blew after only a few months and they wouldn't fix it, so I picked this up because I didn't want to change my direct wiring.", "Unless you are driving a Ferrari or a Porshe and have $2,000.00 to spend on a state of the art radar detector I recommend this one as a best bang-for-your-buck deal out there! The only reason I didn't give it 5 starts is the short amount of time I have had to evaluate the product. Happy Motoring ;o)"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,397
The PLS-9 won't fit, the PLS-15 should work, but I have not tried that combination. Good luck, I really like the PLS-9 with my Mac Book Air.
{"question": "Will this case fit hp envy m6 notepook with 15.6\" display? Dimensions are 15\"x10\"x1\" (inches)", "document": ["This fit our new MSI Wind Netbook just perfectly. It has a 10.2\" screen and this case looks like it was made for our netbook.Super handy cable storage and it even has integrated carrying handles!", "I have an HP pavillion dv7, and this case is perfect for my laptop. The width is almost exact which gives it a semi-snug fit which I like. The inner material is soft and the front half pocket fits my huge adapter, as well as my wireless mouse perfectly.", "I made the mistake of calling Caselogic for sizing guidance on the right sleeve for my new laptop and was badly misled by its customer service department. It's extremely frustrating to make a point of doing research only to be given completely inaccurate information by the company. I provided Caselogic with my laptop make and model information and all dimensions, and the company proceeded to recommend an ill-fitting sleeve because it doesn't sell any sleeves that WILL fit my laptop but apparently didn't want that to stop it from making a sale.", "I have an HP Pavilion dv7, which has a 17\" monitor. This case is just the right size for this laptop. There is enough room in the secondary pocket for power cords, antenna, and memory stick. The build quality is good. I would recommend this case to anyone who has a similar size laptop.", "I have an HP dv7 17\" laptop, and this case is way too big. Its about 2\" too wide, and 3\" too deep, so the laptop slides around in the case, and it takes up a huge amount more space for storage. Very disappointing, but this is a work purchase so its too much work to exchange. Next time I'll just buy from the computer people.", "Overall, love the case. Stretches enough to accommodate extra parts (cords, mouse, etc.). Light yet durable. Will cushion the lap top from everything but a direct drop onto concrete. Do wish it had some type of handle... 17\" lap tops are heavy and this can be quite bulky to deal with, especially in the airport security setting. Wish it came in different colors too. Would buy again.", "The sleeve was too good. It fits my hp dv9700t(17-inch) perfect.The sleeve has some extra padding at the bottom which makes it robust n I hope it will last long.Also, it has a additional pouch in the front to hold some paper plus a USB drive but not good to hold ur battery. Over all, the product is good and i would recommend to anyone who is looking for a laptop sleeve for 17-inch notebooks...", "Appears well made. But bulky and over sized even for a 17\" screen laptop. Don't expect a snug fit.", "Great product as always with anything from Caselogic. Only one down fall though, it does not fit snug, and make the computer look ever bigger.", "Nice product, fits well over laptop (HP G71), pockets stretches to fit cord, mouse and pad. The one thing this needs is a handle."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,420
It's a hard drive specifically for Xbox 360, see shell casing.
{"question": "Isn't this just a standard hard drive? Can i use it with my wii u or PC?", "document": ["Just expect it not to be the full 120g due to formatting on the drive, no other complaints. 106g Of space to use. Been loading up map packs and games Ive bought via the market place as well as ripping games to the drive such as Dead Island, Sky Rim, DDR etc and have only used 15g all together. =3I recommend this drive fore anyone whom owns the Xbox 360 Slim 4gig =3", "I am very pleased with this hard drive, and that it cost much less than if one were bought at a store.", "ive may hard drive for a couple of weeks now and i have not any problams with it so yea this product is pretty good.", "Very satisfied with this product. Was kinda hesistant about buying an off brabd hard drive but it works perfect and runs great.", "I just ordered a new hard drive and shipped this one back (I had to pay return postage).", "Broke within 3 months, not an official Microsoft Hard Drive so will not work for a lot of games for your console.", "Works really well, you get about 115g it has to format to your xbox 360, plugs right in and then you got your self a hard drive!! !", "Bought this because my first hard drive failed on me. So this was a replacement for it and it worked great. It came earlier and with no problems. Would highly recommend", "Hard drive worked well , no problems so far ,Enough space for downloads and music .Item had no damages or problems , thank youI hope this review helps you .", "My 13 yr old son had no problem adding the hard drive and it's been working great! I would recommend this product to anyone looking for a Xbox 360 hard drive."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,421
You have to hold dispense button for it to pump the water.
{"question": "Does it pump water out automatically after you press the dispense button once or you need to keep on pressing the button to fill the mug?", "document": ["Love my hot water pot....hot water 24 hrs a day. Never have to wait to get the hot water. Just press a button and your cup is full. The meter on the front of the machine clealy shows the level of the water inside and lets you know when you need to fill it. I filter my water with a Britta filter...and two full pitchers of water is needed to fill up this hot pot.", "It is terrific for that morning cup of coffee. Set the timer so that when you wake up it has reached the desired temperature and you can warm your mug, cup, thermos before filling with your coffee/tea. Did I mention that when baking/cooking if your recipe requires hot water no more using the microwave to heat water, just press a button and the Zojirush has it ready.", "I've recently gotten really into drinking tea (partially for health reasons) and having this has just made that so much easier. Pour some water in, turn it on, select from a list of temperatures you want, and it does the rest. When you want your tea (or hot chocolate, or hot apples cider etc) you just hit "dispense" and get a mug of water for your favorite beverage at the *perfect* temperature.", "It takes 2 seconds to have an access to hot water... press the button and Go.Why not 5 stars.1. I wish there is \"on\" and \"off \" switch.2. Takes too long to boil the water", "this water boiler is the best thing ever. hot water at the press of a button. cant get any easier than that. Highly recommend this product, and I think every household should own one of these or alike.", "When cold water is added it begins to reboil it automatically, no need to push any buttons.It has a timer, that can be set to up to 10 hrs which we use during night time so we can save some energy.As a vivid tea drinker I love having hot water instantly all the time.", "Easy release / dispense button prevents \"accidental\" leakage / pouring especially if you have young children. 4 different digital temperature control selection allows you to adjust (and hold) your water temperature as needed. We use it for tea, but imagine it'd be pretty convenient for a person who needs to make baby formula, coffee, instant noodles etc.", "I have many Zojirushi items at home, and this water boiler was to be a gift for my relatives. After using it for over a month, I asked them how they like it, and they said it was great. Previously they have a Zojurushi (older model) where you had to manually push/pump the water out, and they really like the automatic button dispenser better.", "I was so looking forward to my Zojirushi water boiler and warmer! My present large flask sputters and splashes when I fill a mug or cup for tea or coffee.I read the instructions - but missed an important one - it was right at the end, but I feel it should have been nearer the beginning because it is so important. I had purchased a plug/adaptor for use in UK, as the Zojirushi appliance was fitted for USA.", "We had a previous Zojirushi model Cd-juc22fs. It never broke down but its age was showing. This model has a nice musical alert when the water reaches temp. It also has two flow options, fast (default) and slow which comes in useful for us. There is also a timer if you wish it to automatically shut off. The timer button is in the same position as the unlock button on our previous model which took a little getting use to. This model also has a swivel base."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,430
I bought the infuser and lid kit for Groschr Glasgow I think it cost $13.50.It fit it well and use it as both infuser and lid.
{"question": "Really like this kettle. How can I purchase a replacement lid for it?", "document": ["I looked to see if I could find a replacement if it did break but haven't been able to locate one.Over all I really like it.", "We were very happy to get this handsome kettle. I was looking for a healthier container in which to boil water. And I love to watch the water boil; it's really a beautiful process. However, the lid was not a solid fit, and eventually fell off the kettle when pouring and broke into a million pieces. It must be held on very solidly with the other hand when you pour (like old fashioned tea pots).", "It is a clear lid, making it just a tea kettle. The replacement cannot be used without an infuser. Also lame.Be glad you bought it here and not the magazine I originally saw it in for $45.00...", "Everyone who comes over compliments it.How could it get any better? Oh, it gets so much better.So, my roommate did accidentally drop the lid and it broke. (But notice how I am not blaming the kettle or the manufacturer because a piece of GLASS broke when it was DROPPED on a tile floor. )So, after visiting the Grosche website, I felt encouraged to write to them about a replacement part.", "I understand that no replacement lids are available. I would redesign this lid with a longer lip that enters the kettle, so that it won't fall off so easily. Well, I'm not sure what to do with the kettle now. I have only had it for 5 weeks. I suppose I could still use it, but the boiling time will take longer now that it has no lid. And I'm now concerned that the rest of the kettle could break.", "The fragile glass lid that perches on top loosely very easily slips off the top if you are not extra vigilant when pouring water from this kettle. I don't know why they have the picture on the box of the kettle colored indigo but it is very misleading as the only part that is indigo is the tiny knob on the lid. There is no way to get a replacement lid if yours breaks. If you get the infuser w/ lid you cannot use the lid w/out the infuser.", "I wanted a glass kettle for coffee making. I either use a french press, or a Melita drip filter. I really like the style of this kettle. Unlike other reviewers, I did not ever think that the entire kettle was cobalt in color; you can see by the picture that the liquid is colored. This was done in order to clearly see the shape of the vessel.", "...except the lid doesn't stay on. This pot is the second I purchased. With the first one, the lid fell off and broke straight away. With the second one I have put the lid aside now so it doesnt happen again and since it doesnt really need it.I replaced the first one because it developed a slow leak (small crack) but that was after over a year of heavy use.", "I bought this glass teapot ...which I adore.....and lo and behold when put down the lid on my granite countertop ...it chips. I contact the seller and after several attempts at phone tag and her searching out another lid with the blue ball....I am able to get a replacement top. I am so appreciative for the exceptional customer service. This is a tremendous product as glass is the safest medium for heating tea water.", "Not so, it's all clear glass apart from the blue knob on the lid. The product is marketed by Grosche International Inc in Canada but it's made in China. Despite the imposing company title, Grosche is a small enterprise formed in May 2010. Like Haagen Dazs, Grosche is likely an assumed name and there's no Mr Grosche. Etched on the base of the kettle are the words \"Grosche Kuchenware\". A number of Chinese manufacturers produce these borosilicate kettles in several variations."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
32,439
Sorry, I don't know those other vacuums. I like this one but unlike an earlier model, the hose connects in the center of the top and it makes it harder to drag it behind you. It over turns over .... darn.
{"question": "how does this vacuum compare with similar Bissel Zing, Dirt Devil Express or Panasonic MC-CG301?", "document": ["After my Kenmoore canister vacuum died I was left to search for a replacement. My Kenmoore worked great but it was heavy and expensive. I purchased a Dirt Devil which I ended up returning due to the fact that it was much too cumbersome to use and I really didn't like the bagless feature. After reading some reveiws I decided to try out this little canister. It just arrived today and first I couldn't believe how light weight it was. I figured that meant it wouldn't have much power. Boy was I wrong.", "Its motor finally died. Zing is better than 6800-1 because suction is adjustable. I have wooden floor so lowest setting is enough to do the job. When i turn it all the way up, the 11\" nozzle suck onto the floor very strongly. I recommend Zing Black.", "It, sir, was no Kenmore Magic Blue. The plastic parts were flimsy and light, and joints that held parts together had no connectors - they just slid into other plastic. Overall, it did not feel solid, which led me to wonder if it was strong enough to actually vacuum up dirt well. The cord is also short.", "It does a good job on carpets as well, even though there is no beater-brush type attachment. The bags are compact so you can change them frequently and keep the vacuum running in top shape (and get rid of the dirt easily). Overall, it seems like it will not disappoint. I would recommend this item because it perform like vacuums twice the price.", "This is a basic cannister vacuum that is inexpensive and works well. It is lightweight, so easy to maneuver. It has good suction, and does a good job on hard flooring. It comes with a standard set of attachments, that are adequate for my cleaning needs. The vacuum does not have a motorized head to really beat the dirt out of a carpet. However, if you have good oriental rugs or woven, natural fibers, you specifically shouldn't use the motorized head kind anyway.", "Cord would not rewind after very first use. I am returning it with cord stuck unwinded. Quality is very cheap and flimpsy, host thin, plastic tube cheap quality and not retractable, plastic wheels bent ( I can not believe Eureka let such bad workmanship to leave the factory). Instead, I bought the Bissell Zing (black color). This Zing is only [...] free shipping from Amazon. I got it today and love it for its quality and powerful suction.", "And whatever you do DO NOT just click add these items where it says in lower area to add extra bags. Those they sent do not fit, they sent me ones for a mighty mite.This vacuum is fantastic! It has great suction which BTW is variable from really light suction for knick-knacks and drapes to powerful to get even fine dirt out of a rug. The wand(s) are just the right length so is the hse. No bending to vacuum the floor.", "I use it primarily in my kitchen and it does the job. Sucks up crumbs, dirt, hair, fairly large pieces of food, etc. I don't belive it would suck up a pile of nails or a have enough suction to hold a bowling ball, but those are the not the items I normally try to vacuum up. I normally don't have to go over something twice. It gets it the first time. It does fine for day to day vacuuming and is a great price.", "The Eureka is just perfect for us. I like the retractable chord ( found on expensive canisters), and I especially love the color red. The bags seem quite small, but they hold a lot of dirt, and last through a few goes of the vacuum. You can buy a box of 3 bags at Best Buy for under $4.00. I recommend this vacuum if you have mostly flooring and are looking for a vacuum that does the job well without blowing your budget.", "WOW! Was shopping for a decent but inexpensive canister vacuum for my apartment. I have hardwood floors throughout my apartment and a few area rugs. I have a cat that SHEDS! I was sweeping every day, and still not getting everything up. This Eureka has such amazing suction power that I hear stones and pieces of dirt coming out of the cracks of the floor, things a broom could not get to. Unit is very quiet. Love the suction control dial.Looks great."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,444
can be plugged in and then play radio all day or can play mp3 files from a drive connected to USB port such as a flashdrive.
{"question": "Intend to use it in a office all day long to provide background music. Can it be plugged in and run all day off a SD disk? What is the max capacity.", "document": ["Much smaller than I thought from the picture - about 6 or 7 inches. Very easy to set up and I use it for white noise and meditation - I have not made it boom so I have no idea if it does that but I love it for what I use it for - it also came with a nifty USB LED light which I use in my laptop", "The only reason this got 4 stars is because of the radio reception. They need to add an antena to help with the radio. The concept is great and it works very well. The battery has a long life so far.", "of chargewell done customer serviceThanks FRLTHOMAS", "nothing comes with instructions! I'm trying to figure out how to program the radio, and it would be easier with some instructiosn.", "No this product didn't meet my expectations because they weren't really loud, as i was expected it to be. :(", "Great for boat", ""]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,477
I wear often with my fstopgear backpacks. I have no problems using my blackrapid strap. I typically where it under my backpack. On some occasions you may need to adjust, meaning a quick slide, not a big deal, to make sure the retention underarm buckle isn't uncomfortable while wearing it under a pack. My blackrapids and fstop bags are like AMEX, I don't leave home without them.
{"question": "I want to use this strap while also carrying a backpack. Does this work okay or does having both straps over your shoulder cause comfort problems?", "document": ["The much heavier backpack I was carrying didn't have the same effect. Speaking of which, because of the way its designed, it doesn't work well with backpacks. If you put the backpack on first, you can't take off the backpack without setting down your camera on the ground first, or if you put the strap on first, you can't take it off without removing your backpack first. I've never had this problem with traditional neck straps.Another annoyance was that the length adjustment didn't hold very well.", "Too skinny on the shoulder, makes the camera feel heavy. Got the regular full-sized RS as a replacement which makes the camera fit a lot better. Strap is also perhaps an inch too short for me (I'm 6'4" though so it might work for you if you are shorter).", "This strap is great. I use a canon 60D with the 18-200 lens. Its exactly what I expected and very comfortable to wear all day. I am really happy with this product. The pad is not too thick and the underarm strap can be removed easily. It is easy to adjust, and stays in place well. You can reverse it to the other shoulder, but it doesn't work as well. Definitely designed to hang on the left shoulder and have the camera at your right hip.", "I bought this strap to replace my 4 or 5 year old original R strap which I lost :-(This strap is definitely an upgrade. The curved pad fits much nicer, and the under arm additional strap really stabilizes the strap if you need it. You can also easily take that strap off and use it loose, like the RS-4. The new ConnectR-2 is also an upgrade from my original.Many people complain about the price of BlackRapid straps but to me they are worth it.", "I just got my Black Rapid today. How have I not found this thing before??? Pure genius!! I have walked all over numerous places in Europe, Alaska, and Central America with a standard neck strap tied around my wrist. And thinking I was doing well! LOL!And I put it on along with my mid-sized backpackers backpack as well and they will work just fine together, so I'm all set for the Inca Trail in a few weeks.", "It's the only thing on the front side of the strap so I can easily without looking or thinking about it locate the clasp, open it, slide it down and re-clasp to lock my camera down.- Can be worn under my backpack no problem. This was a must.- Durable nylon straps.- Heavy duty plastic buckles.- The piece that connects to the camera is heavy duty metal. This sucker isn't going break.- Screw connector for camera is heavy duty.", "I purchased a strap that can fit a man that allows a camera to hang at hip length....I'm 5'2...that's a lot of extra strap. There are clips to hold the bundled strap but weren't snug enough and they kept coming out and I had to stop and redo. This was bothersome. I don't want to cut the straps so I'll probably rig it with something to keep them in place.I am not going to say I came out of the hiking trip sore-free.", "I ordered this prior to a vacation to China. I obviously wanted my DSLR with me the whole time, but did not want it around my neck the whole time. I've tried putting the standard Canon neck strap across my chest but it was still difficult to quickly raise my camera and shoot. The RS Sport-2 is the perfect solution! It rests so comfortably on my shoulder at times I forgot it was even there. I can easily slide the camera from my hip to my face for quick shooting.", "If you're reading through reviews of this product you're either deciding if you want to upgrade your camera strap (stock)for a sling-type or you've already made that decision and are trying to figure out which BlackRapid to buy. If you're still thinking on buying a BlackRapid stop... just buy one and feel the difference. There are tons of reviews already that talk about the enormous difference compared to the regular straps.", "I needed a sling strap for my camera to use on hiking trips. I don't use the neck strap at all and prefer to use a small camera bag that fits just my camera that I can grab anytime I need to take a shot with a backpack or bag of gear in tow. For me this method is perfect for me."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,492
The basket is removable from the mug, but is attached to a screw-in ring that seals and holds it in place. The basket is on the small side, and wouldn't allow a bulky tea to fully infuse. I don't know if you could replace it easily, because it is attached to the ring-unit that holds it in place and screws in to the top of the mug. I've had the mug for about nine months, and after my husband has used it for that time on a daily basis, it has started leaking. He really found it convenient until it started having problems.
{"question": "Is the infuser basket removable? Is this basket a little small for bulky herbal teas? Could the basket theoretically be replaced with a longer one?", "document": ["I had purchased the same tea infusser travel mug from Teavana tea shop a few years ago and loved it. I could carry my tea or coffee to work in my purse and never spill a drop. The mug kept beverages hot for hours. I had it for years so it needed to be replaced and Teavana no longer carried this model. This one was by Thermos as well and looked exactly the same, but does not keep the beverages as hot or nearly as long.", "This mug's tea leaf strainer is given enough space for most loose teas, but it is not enough for some herbal infusions, particularly whole dried preparation of chamomile flower. This mug's advertised capacity is 11 ounces, but the line specifying the maximum fluid level is actually 275ml (10 ounces). I wonder if they could make it a bit taller for increased true drink capacity and enough space for chamomile to expand.", "Was going to get the travel mug with tea press from Bodum, but the design seems like it will leak, so got this instead. Awesome quality, great buy. Even though the volume is a little small, but with the infuser you could make good tea without being worried that the tea is going to be way to bitter. The content stays nice and hot too.", "If you're into tea enough to buy good, loose tea leaves, this portable tumbler is very handy. You can steep the tea with the tumbler up-side-down, and then turn it over to stop the process. It keeps the tea at a good temperature for drinking for a long time. The top with the infuser basket can be removed and replaced with a drinking lid.", "(The excellent vacuum insulation also means that this thermos is useless to warm up your hands on a cold day, as the outside only gets a tiny bit warm up by the lid, and stays cool everywhere else.) So if you want your tea to cool down quicker, find a less efficient system!2. Fine leaved teas: As mentioned in other reviews, the tea basket could be made of a finer mesh.", "I wish they made a slightly bigger one - 16oz or 20oz so it could be used for water once in awhile!It also keeps my brew nice and hot! I once made coffee in the tumbler itself, came back 4 hours later and it was still hot! Same with hot drinks in the fridge, if stealed tightly, it was still warm!Only negative is it's a little small to clean, but kind of knew that buying it. Would recommend.", "The infuser works like a charm. I like the shape in my hand. For me, it would be perfect if the thermos could hold a bit more liquid without making it bulky.", "I received this as a gift a year and a half ago and stumbled upon it on Amazon browsing other Thermos products, and I had to share my good word.I am an herbal tea drinker, drinking mostly loose leaf teas and some tea bags, or blending the two. I love that I can drop my leaves into the cup, screw on the infuser as a strainer, and pour in the hot water.", "I love this thermos because it is such a simple design. The insulation is great- keeps drinks hot for hours- especially if you pre-warm the thermos. The lid has two layers that each screw on tightly and securely. I've never had trouble with leaks. The tea basket is nice but the mesh is a little wide; when using certain narrow leaf teas such as Irish Breakfast, a few leaves will pass through the mesh of the basket. I have two of these.", "This tea tumbler is exactly what I was looking for! I wanted something that I could take with me, that wouldn't break, and that wasn't made of plastic! It keeps the tea warm for a long time (it helps to heat the container first with hot water). I use mine daily!The only suggestion that would make it the best would be for the screen to be finer. Some of the really small loose teas can escape through the screen. Otherwise, I love it!"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,515
Yes, it fits peerfect
{"question": "Does it fit the type keyboard?", "document": ["This is a perfect case for who ever has a surface RT, it fit in really nicely, my type keyboard fit nicely in, and it offered great perfection!", "Love it!Fit is perfect, feels like great quality.Fits great with or without the full type keyboard.Love the color options!", "I give this a 5 stars because it's a good cover for a tablet and touch keyboard but not with the type keyboard. By the way make sure you get the colour of the cover the same as your keyboard.Good price though and a PERFECT fit.Thanks!", "This case fit our Surface RT perfectly. It even had a place to put her stylus. It's easy to access, and protects the unit better than the keyboard attachment. We have the type keyboard and it still fits snug inside this case. I recommend this product.", "It fit ok, but would not fit well with the type cover. When you open the folio case, there is no way to secure the keyboard to the lid of it. After playing with it for about 45mins I was already annoyed. I decided to return this product and look for a different/better option.", "Really exceptional case. Made of a sturdy material, and color was exactly as seen. A lot of times, these cases will have a weird oil smell when they arrived...not the case with this case! Also, I noticed before purchasing that a lot of people were worried case would not fit the type keyboard, which is new to the Surface. My type keyboard folds up perfectly with the case, and it lies flat.", "I bought the light blue for my Surface RT tablet. It's okay. You can't use the tablet's kickstand with it, but the front does latch in the back to hold it up. It doesn't have a lot of range for holding the tablet up. I also wish the light blue matched the cyan keyboard better. It also adds a little bit more weight than I'd like. It has a elastic strap to hold it all together. It does fit with the type keyboard.", "This surface case fit my surface RT perfect. I am able to charge my tablet with the case on and it closes right even with the type cover on my tablet. Not the best quality but you get what you pay for and I am sure it will last a decent amount of time. Recommend this seller.", "The case fit as advertised, even with the type cover, but I didn't like not being able to use the Surface's kick stand. I knew I wouldn't be able to when I bought it, but I really does affect useability a lot more than I expected. If the stand isn't an issue for you, then I would definitely recommend it, but I type a lot sitting with it in my lap, and it just didn't work for me.", "This is a great case for the Surface. This is the third one I have tried. The first one was nothing but a plastic backing, that really didn't fit, the second, which I consider a decent case, and offers some protection, was a envelope type case, which you had to take out totally to use. The Folio case is perfect, I can take pictures without having to take it physically out, I can use it as a stand, and it seems sturdy enough to travel with."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,561
There is but I do not have the information in front of me right now but what I do have is the Ocosmo customer service number (855 662 6766). I had a problem with my remote I called them and they took care of it immediately, send me a brand new one no questions asked.
{"question": "Does this come with any warranty? If it does, it's very hard to find that information on here.", "document": ["When I try to watch this tv on a local channel I have to turn the sound up to a hundred per cent and it is still hard to hear, most other channels work at about 70%", "I was a bit surprised at the good color and picture quality. The DVD is good also..Pretty easy to set up. The Digtal stations come in automatically..no pushing a Ch. plus a dash...nice feature.geo v.", "I would have ordered a more popular TV - took forever to hook it up and get it going - more remotes are not compatible with this make - we got it figured out but, with the control it comes with - it only controls the TV - I needed a second remote to turn on the cable and finally got one to recognize both the tv and cable - you have to push bottoms everywhere to get it to one or the other to come on.", "This was a great buy for a 32" LED TV with a DVD player, the base was a little hard to assembly but all the material necessary where included with the shipment including the screw driver to assembly the unit. I would recommend this to anyone looking for a TV at a great price. Shipping was as promised except we were not home to receive it so it was delivered the next day via FedEx.", "this tv was not a 32inch it was a 27inch and it had a scarch on screen when delivered and know I cant return it", "the picture quality is amazing I love that it has the built in dvd player I bought 3 of these to replace my kids big old box TV's and for the cyber Monday price of $199 you just couldn't beat that", "ok so i was a bit worried on these, they where really priced low when i got them and i bought 3 for the kids room because of the built in dvds. gotta tell you they look great and work as described. i mounted them on the wall and havent had any problems with the tv or dvd player. use the sony codes when programming a cable or satellite controller. very pleased with this purchase", "oCosmso TV was bought for my 90 year old mother. She loves the "big" picture, but says the sound is a bit "tin-ny". She hooked it up to her Bose surround sound system and is now a happy camper!", "it is probably the best flat screen we have in our 6 tvs it has the best picture and I would buy another one if I needed another one would highly recommend to everyone", "convienent, easy for young children to use,takes up little space,looks good and overall,, especially price, a good buy,hope it lasts as long as the big name players"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question by extracting information from the supporting document.
32,563
It depends which type of housing you have for the GoPro. Amazon doesn't have this listed on the advertisement but this filter is strictly for the dive housing which isn't standard with the GoPro, if you purchased the specialized dive housing then yes it will fit. If you have the standard housing that comes with the GoPro, then no it will not fit. I learned the hard way and ended up returning this item.
{"question": "Will this filter fit the new GoPro Hero 4 Silver?", "document": ["I ordered this because it says it fits the GoPro Hero 3 White edition ("The Polar Pro Cube Red filter is designed for the GoPro Hero3 Black, Silver, and White Edition cameras."). Well, they mean the old GoPro Hero 3 white edition. This does NOT fit the new GoPro Hero 3 white edition.I emailed Polar Pro and said this.", "This filter works great on the older GoPro housing, but is too large and does not fit the new Hero 3+ housing.", "Well, my husband has a GoPro Hero 3+ with an older underwater housing and this works perfect on his (which was good because his old snap-on version scratched). For the price this works great. I actually purchased it for my new GoPro Hero 3 (white) with the new, sleeker housing. Because the square around the lens on the new housing is smaller, this filter does not fit on it.", "This is for GoPro Hero 3. It does not fit Hero 3+The filter adds (turn back) the colors for your shoots underwater. The videos and photos I take with it became astoning. I really like it.It worth be used until 20m (66 ft) or a little more, if you have natural ambient light. If its dark, it will have no advantage, and you will need to use artificial lights. Great for the purpose", "This does NOT fit all gopro 3. The new housing does not have the same case with the screws to replace the lens cover. It also means the lens cover is small. This will not fit over it.", "This filter does not fit the GOPRO Hero 3+ Black. I had to purchase a different housing for it to fit", "Only fits dive housing for Hero and Hero 2. Don't waste your time thinking it fits the new Hero 3", "Too large doesn't fit the new Go Pro3 camera I bought so it's a complete waste of money. Sad part is that it's advertised to fit my camera? ?", "It Did not fit the housing of the hero 3 black edition. Wish it did but it did not unfortunately.", "Didn't fit my hero 3 surf edition. Was for lord hero 3. Not happy but I should have paid more attention"]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Extract information from the supporting document to answer the given question.
32,570
I purchased some strong bulbs like these and they were so wide around that you could not use the umbrella holder slot, so I returned the bulbs.
{"question": "Would this work with 105 CFL lamps (bulbs)?", "document": ["I use this with Alzo 45W CFL 5500K bulbs and a white shoot through umbrella. Works well although its made of plastic. I use it as fill light for my natural light portraits in studio.", "The lights seem like they are reasonably good quality.I got them for shooting video, and I like the fact that they will fit on my light stands and use my photography accessories. They seem to work best with a shoot-thorough umbrella or umbrella box. If you use a reflecting umbrella, you get a fair amount of direct light from the bulbs, because they are no shaded. I made some shades to block the direct light, but it's not the best system.", "Works great. Will probably get a couple more. I use them to power 1000 lumen LED bulbs through a 3X3 scrim, lighting up a whole scene with soft full light. Would not recommend for high wattage use, but since LED lights these days never draw more than 75 Watts, things like this are perfect!", "It seems possible to screw in a CFL bulb too tightly, compressing the center spring contact more than necessary, and risking shorting contacts. Don't know if this is a problem with the socket or the bulb. Just don't overdo it, and it's fine. Otherwise, seems to be reasonably sturdy and allows mounting two bulbs with an umbrella for a choice of a different lighting ratio. Separate on-off switches are convenient.", "Fits well but tight sockets for the bulbs. I paired it with 2 of these splittersB001ATG0JUand it almost broke them trying to get them in. Finally did though and used CFL daylight 100W equivs and they put out a decent amount of light inside a softbox. I don't use that set up for photography, rather for teaching window light and exposing with a bright background. For that it works well.", "The stand arrived and appeared to be made of study material. There is an umbrella support in the center of the device with a screw lockdown nut, although I have found that large 5 foot or heavier umbrella are not well supported when angled upward at 45 degree from level. Electrically the device works well with up to 85watt CFL bulbs (I did not try higher watt bulbs). One can turn one light on/off as needed.", "One of the lights did not work at first. After doing some tinkering around with the connector on the inside I finally got it to work. I'm pretty happy with the results as my pictures has really come to life.", "A slightly alkward tighening mechanism requires on end bolt to the turned clockwise while the other counterclockwise. It does take a little getting used to when adjusting lamps.", "It is a really good product for the price. It is made out of plastic with a few pieces of metal. I use it for my photobooth application and with the right lamps you get enough lighting just with 1 umbrella.", "It works perfectly with the lights I ordered. I really love this product and would recommend it to anyone who's looking."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,582
I had the same problem but solution was to by a new 3d blue ray Player (Panasonic) with 2 hdmi OUT. assign 1 for TV out the other for audio out only (this connects to your 876) and you're ready to watch 3d with full audio advantage. no need to upgrade AV-receiver since the 876 sounds amazing. Tarzan
{"question": "Onkyo 876 vs 3007 The 876 is discontinued, but selectively available. Anyone have any insight if the extra $400-$500 is worth it for the 3007? Processing better? Sound equivalent? At my local electronics store, I listened to the 807 and 3007 at equivalent volume settings and the 807 was louder - but could that be due to amplifier approaches in the 3007? Wondered how the 876 fits in?", "document": ["What I mean is - I have to crank up the volume to approximately mark 65-70 to hear a good strong loud sound. Then again if I happen to watch a HD programming like Fringe or Survivor, the sound is good. Swap over to the local news which is broadcast in regular non HD and you have the sound processing and volume issue.So I have to constantly adjust the volume depending on what I am watching.I never had this problem with my old unit.", "If you don't have it go to shoponkyo dot com and buy one for around $20. It's well worth it. After that just tweak the decibal settings to your tastes... for example I love hearing more from my surround speakers so I adjust those up a good 3 decibals or so from the natural settings - it makes the home theater experience more fully immersed. I love how this Onkyo blows me away with the sound. Sometimes it's quite breathtaking.", "Let's just say that was a one-off test).You could rectify this `volume' issue by manually configuring the speaker calibration levels on the Onkyo TX-SR876. You can crank up the levels on all the speakers and you will NOT have the problem of having to turn the volume up high. BUT I have noticed when doing that it impacts the sound and clarity.", "onkyo has consistently produced exceptional quality receivers. they produce reference quality sound with loads of features at a low price. i bought this to upgrade an onkyo 601 that i have used for about 5 or 6 years now. i had always appreciated the sound it produced but it is now a bit outdated with only 6.1 surround and no hdmi in/outs. this new 876 fits the bill perfectly. amazing set up, gobs of features and loads of power.", "I put in about 3 days worth of newspapers to better pack it and taped the box up as best I could with about 1/2 a roll of heavy duty packing tape. The final kicker was that I had to pay for shipping - so now I'm out the cost of the receiver and the cost of shipping $75 - until Amazon refunds it all, hopefully very soon.Not sure I'll buy again from Warehouse deals, but I might give them one more chance.", "vs. hard to believe claims of audio superiority.The audyssey calibration also is fantastic. Just follow the guidelines you can find on the internet (look for the Onkyo 876 forum). I was surprised at the difference it makes vs. my trusty old set up using the Radio Shack SPL meter.I was also surprised at the improvement using the Reon processor vs. my pass through HDMI switch.", "This receiver is far more complex than my old Onkyo purchased 15 years ago. The features are first rate, the audio is superb (very clean)and while the manual isn't that detailed it is better than some I have seen. The learning curve to dig through the onscreen menus and find the settings is steep but they are all in there. Read the manual carefully.The difference in audio quality coming from high def DVDs out of my Toshiba A30 and Panasonic BD 35 is astounding.", "For movies, its an amazing performer, offering some audio codecs that are not even available yet. The loudest explosions, to the subtle sounds al come through more clearly, more dynamically than I could have ever imagined. To be honest the majorit of the use it has seen has be to reproduce soundtracks of video games from my ps3. Where it also performs flawlessly. It easly handles converting 5.1 into 7.1 sound and is just amazing.", "iPod interface is also available.I would highly recommend this receiver to anyone wishing a truly excellent audio AND video performer at a reasonable price. There are more expensive ones out there, but MY conclusion is that this has the best \"bang for the buck\" with no compromise. It is almost plug-and-play for anyone having some system experience.", "I spray painted them black to blend in, and I don't have to worry about the weight. I'm pretty sure it would have been ok without, but I feel better making the extra support. We're moving and this will be one of the first things I unpack and set up."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
32,596
The clips hang from the rope in the center. Each clip has room for 3 hats in it.
{"question": "Are the caps hanging on hooks or on hooks so they are securely in place?", "document": ["Bought this for my husband, whose caps were hanging on every door handle. I'm thrilled that they are now all in one place! Easy to assemble, holds a few caps per clip. Well worth it!", "I was a bit skeptical but this system does a great job of organizing my caps. It is easy to get the caps on/off and can mount just about anywhere. I have mine hanging from one of those non-surface damaging hooks in my closet.When I took this out of the box I expected the plastic that secures the caps to the rope would break but it has held up well and seems sturdier than it looks. A very simple product that gets the job done.", "This is one of the best things we ever bought. It holds all our caps and it so easy to hang over the door. The kids now have a designated place to put their hats after games and no more last minute hunts for lost baseball caps.", "Is okay. This cap rack is cheap quality so you have to handle it gently. My husband broke a couple of hooks off when loading it with his caps. Would not buy again.", "Looking at the pictures, I thought it would be a simple matter, but it was not. the wire on which the clips were to be hung looks ugly when it dangles free. Also the hooks were loose and did not hold the caps tight enough.", "it holds my collection of baseball caps securely and works like advertised. Not really sure what else to say about it. If you need economical cap storage, this works well.", "From the picture I thought the rack would be straight and aligned...this is not the case, as they're hanging on a rope, but it does hold your caps in a way you can view them.", "We bought two for my husband for Christmas. He hung them on the wall in his office and wants to buy more. He decided to only use two caps instead of the three per clamp for easier access and it looks less crowded. He was very excited about having the caps hanging up.", "I got this cap rack for my husband for Christmas at a great price. It does what it is intended to do. We have it hanging on the back of a door. It would work even better if we secured the bottom of the rack to the door or move it to the wall since it swings some when the door is opened & shut, and the caps turn to the side. Other than that it is great! So glad not to have a pile of hats in the bedroom!", "I wasn't quite sure what to expect when I got it, as I cannot see how the caps connect. More or less it's a piece of plastic that can hold up to 3 hats each. This piece of plastic then gets caught on the vertical hanging rope. Overall the system works as planned, however I was hoping for a little better quality. After all it's just rope and plastic. However at this point I can't complain much as it's working and been holding up my hats for the last couple of months."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,606
According to the SanDisk website, this will support SDHC card formats. You can get the full set of specifications from the SanDisk site at:http://www.sandisk.com/Products/Item(1151)-SDDR-99-A15-SanDisk_ImageMate_5In1_ReaderWriter.aspx
{"question": "Does this support large SD cards? What size SD card does this support? My current card is 2GB and I need something that can read it.", "document": ["We own a Cannon Powershot G3 and use the SD Ultra II compact flash memory card. I read all the reviews about using the SD cards and thought this product would work just fine for the price. It arrived and the SD Ultra II card did not fit so we can't use the reader. My husband now assumes the mention of SD stands for something else, not SANDISK.", "I purchased this item to read micro disks. It does great as long as you make sure you've got the adapter (the micro disk plugs into a regular size card).I've also used it to read the regular size Secure Digital cards from my camera. Just plug in and go - it's the best!", "On Windows XP SP2, it just worked. I have 2 other readers that do not work reliably, but with SD cards up to 4GB and xD up to 1GB, it works and transfers appear to be faster than when the card is in the camera. The one issue I have is the instructions for the software is confusing and I found that I don't need it.", "I bought a MAC and I am very happy with it, but there are no slots for my different cards to be read, so I bought this and it works great. It's read my regular SD cards and my SD Pro Duo card. It's great!", "The digital media port on my laptop would not function with the 2GB SD cards I needed to transfer photos to a digital photo frame. This was an inexpensive and workable solution. I do not use any of the enhanced features that are loaded with this product, but if your digital media port isn't performing, this may be a good substitute.", "For anyone that has a lot of electronic devices requiring different cards, this is a must. It makes life a lot easier, since you don't have to plug in 20 different devices to get everything you need done. We have 5 different cameras requiring xD and SD, and a PSP that needs Memory Sticks. Rather than search for each different cord to plug in, we just use this. Truly a five star product.", "Great price...easy to use...just plugged it in and loaded card..didn't see any need for loading the software for simple transfers. I use it to create custom cards for digital frames.", "Great product, after upgrading to Windows Vista, I could not read my SD Card from my Kyocera M410 Digital Camera. The Sandisk SDDR-99 works well with Vista.", "BCBefore child, I went to the store with the picture station and did my picture work on it -- to save my printer ink?!? We looked at buying this the same time we bought our Cannon s2 powershot, but decided that it wasn't necessary and why spend another $20 on something we didn' need?. Boy were we wrong.ACAfter child, I ordered this reader and voila! I have pictures to email to grandmas in seconds.", "I just purchased (but have not received) my second one of these. The first one I bought ~five years ago, when I bought my first digi cam that had an XD card. The original is on the fritz & I replaced it with a 99 cent one (different manufacturer) I bought on eBay...although advertised to read XD cards, the eBay one did not. So I decided to go with what I knew & got another one of these."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,625
You should burn it first. You can go the other way but you'll need to be certain that it is completely dry before you burn it. There is a possibility the graphics could smear if you don't. Not likely but a possibility.
{"question": "Do you burn the dvd or print on it first? Or it doesn't matter?", "document": ["This is the first Watershield Disc I have ever used.I was pleasantly suprised at the beautiful glossyfinish! They burn perfectly as I have come to expectfrom Taio Yuden!", "I'm converting all my family vcr tapes to dvd and bought these dvd's so I could print the labels on them. They were absolutely great, I've used 50 with no problems at all. I'm using the Epson R200 and the ink seems to dry quickly, doesn't run when it's wet and doesn't scratch. I would definitely recommend these.", "Most anyone can print on a cd.... but these make your discs look pro. The glossy finish is so much more impressive, when compared to the matte finish. My only dislike is that they are 16X speed. Some older dvd players don't recognize DVD media that is faster then 8X. Fortunately more and more people are upgrading their dvd players and the compatibility issue is becoming less of a concern.", "Taiyo Yuden has the reputation of being a premiere blank disc manufacturer, and it is well deserved. I've never had one of their discs fail to burn.But the exciting thing about this particular disc is the glossy Watershield surface. Simply put, if you start with a quality, high-resolution image and print with a high-resolution consumer printer [I use an Epson R260], you will be amazed at the image that you'll see on the disc. It looks in every way completely professional.", "Everyone perfect. I create very large slide shows with lots of transitions and slide styles. My shows always run perfectly and when I print the subject matter on that WaterShield surface they look very impressive too. I love these! They are better than anything else I've used, AND, I've NEVER burned a coaster using this product.", "Don't think I've ever had a coaster and the high gloss finnish makes the graphics pop on the dvd. Highly recommend", "an outstanding offering, but since you basically can't find a comparable dvd+r product (last i checked) why settle for anything less than taiyo yuden/jvc? i'm not saying it's flawless product, but it is more reliable than any other product that i have used; and that's saying something!", "My wife bought this product and was ripped off. Only the top half of the stack (the first 25 discs) was DVDs. The rest were all CDs. When she tried to complain, they said that they did not accept complaints beyond 90 days after purchase. This is dishonest, and I do not recommend this vendor.", "These are the premier waterproof DVD's. They have never failed a burn and always look like they were printed professionally.", "But when I want to impress someone or when I want to give them the very best that is available to me, I ALWAYS burn to Taiyo Yuden Watershield."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Generate an answer to the question by utilizing the information contained in the document.
32,631
I only charge mine with the USB cable on my computer and while it does indicate a full charge in a couple of hours, I found if I leave it connected overnight I get a longer time period between charges. I have my notify set to 30% and 20%.
{"question": "How long does it take to charge? via USB on a computer, car battery, or home current, does this change the charge time?", "document": ["I bought this to track a rarely driven vehicle. The reviews are great and accurate. It works plugged in. It comes with the USB cord for your computer to program it and charge it, but no AC plug or 12v auto plug. If you buy a $3 auto 12v plug, you can use the included usb to have this always plugged in and charging (and draining your battery).", "A handy device, but the Battery life is nothing like claimed! My experience has been that it lasts about 1/3 as long on a charge as the Garmin Manual claims. Often the software requires several location reloads before it gives you the current location.", "I have peace of mind. The battery life is okay but I think thats because I live in an area with poor cell reception. But I take my dog's collar off every night and charge it so its a non issue for me. I lost her once before and got her this when she found her way home. It seems to work well and I can track it from my phone.", "the both seem to take a long time to connect with the device. A device I might have just turned on, placed on the hood of my car, waited for 5 minutes the apps where still giving my last nights position. eventually after pushing refresh enough times it works but I wish I knew what was happening and why it seems to take so long to lock if it hasn't locked in a while.", "We get alerted everytime the nanny takes the baby out of the neighborhood. We have it installed in the car seat that goes into the car or into the stroller. This works like a charm. We charge it once a week and we have a geofence set up so that it sleeps as long as it is in the house or on our street. Battery lasts all week just fine.", "This product performs pretty much as advertised. It is a great product to keep track of kids and I love the fact that it easily integrates with your smart phone. Not a great choice for long term tracking, unless you want to hardwire into your car.There are two things that could improve battery life:1)More setting options. There should be more choices of how often the location updates so that you have more battery life options.2)Have an option to turn off charge LED.", "Then we get in the car and check their current location, drive to that area, check their location again to see where they moved, get closer to the new location and check again constantly getting closer and closer until we find them and get them back home. It is so much fun seeing the look on their faces when we locate them so far away from home. It's like, "How did they find us so fast, we were having so much fun".", "When it works, it works very well. Several times when I really needed it the website would be down for maintenance for a long period of time.7-5-13 Changing my reiew from 3 to 4 stars. Most of maintenance delays I found out are due to me needing to log back in to the web site rather than going back to my computer 20 minutes later and trying to \"locate\".", "Enter Garmin. I certainly had my doubts but gave it a try. I had my wife put it in her car to give it some dry runs and I tracked her from my computer. It worked just fine but my real reason for getting it was to be able to track from my phone. Make sure you buy the constant tracking option of one month at a time for 5 bucks. It gives location every 15 seconds or so. They give you 50 hours with it and you can renew whenever you want.", "I'm not sure if this was a glitch when I changed the settings or not. I contacted customer service on the second day and I got the standard \"it could take a long time\" and \"please delete your internet cookies\" and \"maybe your browser is not working try another\" type of response at the end of which they tried to up-sell me on the more detailed tracking plan."]}
null
Answer_Generation
IND_Diverse_Instruction
train
null
Answer the given question using the supporting document.
32,655