output
stringlengths 1
8.55k
| input
stringlengths 189
11.8k
| options
null | task
stringclasses 1
value | setting
stringclasses 1
value | split
stringclasses 3
values | few_shot_example
null | instruction
stringclasses 5
values | __index_level_0__
int64 20
234k
|
|---|---|---|---|---|---|---|---|---|
On amazon below the product it gives you several options to choose from. I bought the pkg with several to have on hand a clean one all the time. I also turn the pad over half way thru the job to get double mileage from it. If it's a big job the extra pads make it easy to always have a cleaner pad if it's a real dirty job.
|
{"question": "what mop pads does the Enviro 313A use?", "document": ["Eureka 313A Enviro Hard-Surface Floor SteamerThe price is right for this mop and it actually works, Heats up very nicely and pads are reusable and washable. I put mine in the washing machine. I ordered extra pads to use. They work best. I tried using a towel but it doesn't work as well. Very simple to use and it is light weight. Best of all no chemicals just water and there is no sticky mess from chemicals. I use on ceramic, limestone and hard wood. Love it!", "My first floor steamer was a \"Steam Boy\" and it lasted about 3 years. It was okay, but I am rather glad it bit the dust. The Eureka Enviro 313A is a better product at a good price point.Easy to use right out of the box. I have not had any of the \"puddling\" issues others have mentioned. The head is broader than my last steamer and it swivels. The pads are a good quality (heavy weight, textured and absorbant).", "I've had a Shark steam mop, a Bissel Green steam mop, and now this Eureka Enviro 313A. Pros: It stands up by itself, which is terrific. The cleaning pads clip on so they don't fall off while your mopping. There is a long enough cord for me, it's not really longer than my Bissel. It doesn't need a separate filter. There is a foot switch that turns it on and off instead of sparks flying out of the outlet.", "The Eureka 313A Enviro Hard-Surface Floor Steamer uses only water to clean your floors. If that is important to you then you will like this product. I would of loved to have this product when my children were smaller and crawling on the floor. It dries quickly compared to using a mop and bucket. I was able to put a microfiber towel instead of the pads provided. I think it picked up small particles better than you can with the pads provided. It does not work miracles.", "I read lots and lots of reviews before I got this Eureka 313A Enviro Steamer! I don't really need a mop that sanitizes the floor (after you walk on it for the first time it isn't sanitized anymore). I just wanted a mop that cleaned really good and didn't made me buy stuff to use in it every time I moped. This uses only water. I pay every month for that anyway. No extra cost there! It cleans so much better than the Hoover Floor Mate I had before this!", "I researched steam mops extensively and they all seemed to have at least one drawback. I weighed my options and decided to go with the Eureka 313A Enviro Hard-Surface Floor Steamer. I was not disappointed. I really enjoy cleaning my floors with this tool and don't know how I lived so long without it. I wanted to get a steam mop because I have a toddler in the house and wasn't interested in using chemicals to clean my hardwood. I also wanted something that was quick and easy to use.", "Love it! Does the job it claims. Easy to handle,easy to fill and continuous flow of steam.Easy to clean and change cleaning pads.Handle adjusts for comfortable height. Only flaw.the cleaning head will not get close to baseboards or under dishwasher where there are frequent spills but neither do sponge mops or rag mops plus no chemicals are needed and my hands are gratefulEureka 313A Enviro Hard-Surface Floor Steamer.", "For 12 years I have had and used and have been very happy with a Eureka Enviro Deluxe steamer. Having worn this one out, I got this Eureka 313A after reading the reviews and having had such success with the last Eureka product.This new one is VERY SLOW TO HEAT THE WATER, The pads SHRINK to where they are to small to cover the bottom and anchor well. I am so disappointed with the quality of this new version. Wish I had never bought it.", "I bought the Eureka Enviro Hard-Surface Floor Steamer 313A in 2011. Our house at the time had a lot of tile, but the tile was textured. The steamer did well cleaning the top surface, and loosening the grime in on the lower surfaces, but I needed to carry a toothbrush with me to get stuff out of the pits/nooks/crannies of the tiles. The pads are not textured enough to get down into all of the crevices. Perhaps using a different type of pad would work better.", "First steamer I bought was the MonsterEuroflex Monster EZ2 1200w Disinfecting Floor Steam Cleaner With Carpet Glide and 3 Bonus Microfiber Pads (6 Total: 4 For hard-floors and 2 for carpet)and it died after about 10 uses, but since the one year warranty was up, they said \"too bad\" and tried to sell me another one. Reading reviews, I decided to buy the Eureka Enviro 313AEureka Enviro Hard-Surface Floor Steamer,313A."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,366
|
No, there is no warning beep at all.
|
{"question": "does this timer feature a 5-minute warning beep? (e.g., if I set it to go off at 30 minutes, will it give a warning beep when there is 5 min left?)", "document": ["As a tea lover, it's hard to find a good timer - some teas need 2 minutes, some need 30 seconds! I love how I don't need to fiddle with this by hitting a button 30 times if I want to set it to 30 seconds, then another 30 times to reset the seconds to 0. The option to either beep or vibrate is useful if you need to be concerned about disrupting others with the noise.", "I agree that the \"Two Alarm\" description is a little misleading.It refers to the fact that you can use it toa) count DOWN from a set amount of timeb) count UP (to see how long something takes)The best feature is that you can directly enter the exact amount of time.e.g.", "This is a great timer and has all the bells and whistles (excuse the intentional pun, please), The only reason I didn't give it 5 stars is because the magnet on the back is on a thin clip and it wobbles and falls when trying to turn it off. I have learned to just set it on the counter and work with this engineering defect.", "One for my 8yo to time how long he can read in bed before turning the light off. Vibrate mode works great for him. One for my kids to set a limit how long they use the bath room. Without it, they would stay in the shower 30 minutes easily. It works great. I highly recommend it.", "This timer is nice and loud, easy to hear if you're in another room, and it doesn't shut off until you turn if off, so there's no risk of things burning if you have to go out of hearing range for a few minutes and miss it going off.The large numbers make it easy to read from a distance.It's also very easy to directly enter the time you want to set it for, instead of having to scroll through all the numbers to get to the correct time.", "My primary goal in buying this was to find a timer that has a keypad that allows you key in numbers. Like other reviewers, it's ludicrous to think anyone wants to hit an UP arrow 30 times to get 30 minutes on a timer when you are baking. This accomplishes the goal, and I like it's looks. I only gave it 4 stars because of it's form factor. It really is designed to be mounted on a fridge, and other reviewers mentioned it doesn't stay there.", "Item arrived with very thin magnet attached to the back. When i placed the timer on the side of my refrigerator, it immediately fell off and the magnet broke into several pieces. i am now left to go to the hardware store and find a suitable stronger magnet that i can glue onto the back.", "I ordered this timer when I discovered that the Westbend I had previously ordered couldn't repetitive time similar events. I often need to time multiple one-minutes (or 45 seconds) in a row, and that was not easy on the Westbend. Then, after just one month, the Westbend lost its ability to make a sound: It could still count down, but it couldn't beep at the end, which made it pretty useless unless you wanted to sit and watch it count down.", "This is a great timer, but somehow I had the impression that it was also an alarm clock. (My bad.) I ended up for 10 days on vacation with this as my alarm... every night I had to do some arithmetic to set it. Guess my math was up to the task, because it worked just fine, with a max of 9 hours 59 minutes!", "I ordered this timer because of the direct entry capability - I hate scrolling to set a timer. I tried it out when it arrived, and it works fine, but it NEVER shuts off! I e-mailed the manufacturer about it, because I assumed it was a defect and would eat batteries like mad.The reply? \"Thank you for your email. This unit does not have an on/off switch and does not power down."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,374
|
Per the owner's manual, it can handle up to 40gb total. So if you have an 8gb player you can get a 32gb card and it is suppose to work. You can download the user's manual in pdf form at www.sandisk.com.
|
{"question": "Can it be successfully expanded to 32gb or more?", "document": ["I really like quality and features. You can expand space by 32gb with a micro card. It comes with an FM radio and other features.", "Often it is hard to see books with long titles you are trying to find because the lettering is too big and can't be adjusted.I have a big fix for the touchpad which I have implemented on my Fuze+ successfully.First off it amazes me how this model was allowed into production with such an aweful touch response navigation. Do Sansa have product quality control? Its pretty ridiculous. The only thing they have done is to update the firmware.", "this is a kick ass mp3 for the price. its looks nice and is tough. i drop mine all the time and she still keeps playing,", "You need to open the casing -- search on YouTube for video explanations on how to do this.Be extremely careful with the wire that connects the touchpad to the Sansa circuit board. I did disconnect the wire but it was not easy to put back...You need to pry the touchpad off the top plastic casing -- its stuck down with a thin film of adhesive.", "Worked just fine for about a week, until . . . DMR. Having Rhapsody and actually loading the music to the player legally this is a very stupid problem with the device and i dont see how they can even sell something with problems such as these. The sansa is probably the worst purchase ive made online. Of course the help websites are useless and the tech support is sub par. I thought this would make a decent player for the price. DONT BUY THIS! !", "Why? Because, quite simply, I love it. It's easy to use, it's fairly inexpensive, it's lasted me a long time, especially considering how often I've dropped it. The drag and drop with iTunes is simple. The controls are easy to use. I can lock and unlock it easily. My only point of minor annoyance with it is that I can't rewind and fast forward through a podcast to catch something I missed.", "We found the Sansa Fuze+ to be very difficult to operate because of inconsistency in sensing finger swipes. However, you're not going to find a better MP3 player for the money, and the audio fidelity is fine.So if you are willing to put up with occasionally having to swipe a couple of times and maybe go back in the menu to redo a command, this will serve you well.", "Was so excited to see this product available and couldn't wait to get it.It did arrive on time, no delays there. As usual, Amazon is great about that.I have returned this product though. When it arrived, I put a full charge on it, plugged it in the next day (I use this at work) and the battery life only lasted a couple of hours. I thought maybe because it wasn't fully dead when it arrived, that the charge didn't take as well.", "Unresponsive touch, Rockbox incompatible, finicky software and glitchy syncs, wonky album art, hard to control eq, painfully obscure video codecs, volume buttons and power never feel like they go down, cheap plastic. Need I say more?", "This is a piece of s***. The controls are unintelligible. My kids can't even figure it out and that should speak volumes."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,378
|
For double check, would you please let us know your original battery part number? Please feel free to contact us via support@ianker.com, we will always be here to assist you.
|
{"question": "Has anyone ordered this battery for HP G7 , just want to know if it fit correctly?", "document": ["Seems to fit my HP Pavilion DM4 1165 just fine. I made sure it was in there correctly, I shook the computer around, tapped on the battery, it didn't fall out. So far so good. The product arrived on time, the battery had a 62% when I turned it on. I'm following the instructions on how to calibrate the battery. I will post another review in a month or so after I use the battery and let you know how long it lasts.", "This was a replacement battery for a HP Pavillion G7 laptop computer. The seller packages their product very professionally and it arrived very promptly. The battery was a perfect fit and I had ordered the battery with more capacity than the original one. Once in the computer the battery had about a 66% charge and I topped off the charge. Once fully charged, my computer indicated that I now had much more useage time than the original one. The battery is holding its charge and functions perfectly.", "The battery worked well, but would not fit into place correctly. it no longer snaps into place and I have to physically hold it in if I want to move it. I wish I would have spent a little bit more money and got a higher quality battery, because this one is pretty useless. I am buying a new one now. - After writing this review, the company contacted me and was very good at replacing the faulty battery. They told me that about 1 in 100 batteries dont fit right.", "I have had this battery for several days now and I am very pleased with this product. I have a HP Pavilion G7 that came with a MU06 battery. The Anker replacement fit perfectly. I conditioned the battery according to the instructions, letting the battery fully discharge and then charging it to 100% with the laptop off. I did this three times and the battery is working great.", "After reading the reviews, I ordered this battery as a replacement for my HP laptop. It arrived very quickly, and fit perfectly in my laptop. It holds a charge much longer than the original did even when new. I would definitely recommend this battery, especially for the price on Amazon.", "Works great with my laptop, HP Pavilion dm4 2070us. Not tight or loose, it just fits *almost* perfectly: as another review had stated, the battery does not fit flush but is not noticeable unless you know and are feeling for the difference. I purchased the 5200 mAh version and have ~6 hours use running on energy-saving and dimmest screen brightness settings. Absolutely wonderful! Doesn't look or feel like a generic version at all. Go ahead and take the leap. Buy this battery.", "This is the second Anker battery I purchased for my laptop. The first was "Anker New Ultra High Capacity Laptop Battery [12-cell / 8800mAh] for HP G42 G72 G4 G6 G7 G62 G42t HP Pavilion DM4 DV5-2000 DV6-3000 DV3-4000 series" which didn't fit well. This battery fits and works well for less cash than the HP replacement.", "I ordered this to replace the cheap 6 cell factory battery for my HP G62. I was a little skeptical to order a 3rd party battery based on other's experiences (bad cells, doesn't fit right, etc). But the seller has a good reputation and seemed to work with their customers in case any issues so I took the chance. I can say I'm very pleased with this battery. The new battery snapped right in place... ok, so far so good.", "For the HP G62 laptop x64, you want the 4400 mAH.As an added bonus, the battery arrived in just one day (not the two promised by Prime shipping).Would definitely purchase this battery again.", "Have been using this for over 6 months. has great battery life.. works for 2-3 hours. Still!! For the price, I would never want to buy an original battery from HP. its such a rip off!! Oh ya.. it fits well too!! I have a hp pavilion dm4."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,396
|
It comes as a set of two and they are well worth it. They sound GREAT!!!
|
{"question": "how many speakers are included", "document": ["After I added these tweeters into my speakers the sound are more clear you can hear every little sound you haven't heard before even the song you hear many times, because my room is large and I have two Jbl subwoofers.", "These tweeters sound very good. After installed on my wall speakers system the sound quality improves tremendously. I'm very happy with this purchase.", "seem to be well made. had to modify cabinet a bit but I knew that going in to it. sound is good. got my old speakers sounding good again", "Awesome tweeters, well made, easy to wire up and sound is excellent. I used these to replace two blown tweeters in some old polk speakers i had and they make a huge improvement. and the price can't be beat !", "I got this tweeters to add a more clear and crisp sound to my system and I have to say it was well worth the investment. They are cool looking, affordable and shipping was fast. Crossover and high frequency filter included. Easy to install", "I had to modify these alittle to fit them in my 1986 monte carlo, but I managedCame with baseblockers :thumbsup:They are OKAY, not the greatest but OKAY, I used them as dash speakers, nice highs response from these for how small they areDon't get me wrong they are no selenium 250, but for dash speakers they are alright", "Ok I talked alot of trash to a friend I know for having these old style tweeters in his BMW but I looked around for some 3 1/2 inch speakers to go in my dash of my 1995 VW Golf and they were all WAYYYY to expensive for the ones with a decent rating. So I figured they don't cost that much I'll give them a try and WOW!!! I had to tell him \"Man you were right\".", "works great, good sound ...and cheap at 20 bucks ....and they got some weight to them don't know if that matter just wanted to say that :-)", "very flat response with a 2 mfd cap using peerless hds 5.25 woofers in a modified optimus rs cabinet. good build quality. might try on sony sb 1000 for more open/extended vocals. nice sound with a simple crossover.", "these tweeters are very well built they have a high output with a lot of tweet..one is all you need! !"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,400
|
Yes - can be set up to eight years out and count down
|
{"question": "Can this be used as a countdown for 5 years out?", "document": ["I bought this for the countdown feature, and it serves this purpose very well. It can also be used as a standard calendar/clock, as well as a stopwatch. It's simple to program on your own, but the device also came with instructions that are easy to follow.", "I gave the countdown clock a 4 star review instead of a 5 because of its size.I was expecting something a little bigger!This clock is about 5x3.Also, the instructions were written by someone with a less than competent graspof English : )Otherwise, it works as advertised!", "I love this product not because I'm only a gadget freak, but also because they have the following features:- Countdown Timer- Target Day Countdown Timer (up to 8 years ahead)- Clock (12/24 hour format? )- Count up (like a stopwatch)- All features except the clock has a timing resolution of day:hour:min:sec:1/100 secEverything has met my expectations and I was very satisfied with the product!", "I have used this timer to measure how long it takes me to complete a project I am working on. There are times when some projects need a give time to set up such as gluing items together I can use the count down timer to know when I can move on to the next step.", "There were no instructions, so i had to keep pressing buttons until i figured out how to set it up. Once i figured it out, the countdown is working great!", "The first one I received had a problem. Dealing with customer service was a pleasure. I use it as a countdown timer. It was easy to set up, and works just fine!", "Bought timer to count down to retirement. Does exactly what it's supposed to do... count down. Great price, etc..... So, if you have an important occasion coming up, or, you just like watching a countdown clock... this is the one.", "Easy to program as a countdown timer, works well as a simple clock, has an alarm that can be set for up to 8 days ahead without impacting the countdown. Plastic, but well built.", "I like the size it can be very visible if you want and unobtrusive it that is required. I wanted a device that did a negative countdown. I will see when my event date is passed. It is easy to program. I like the long range feature in that I will be able to program many more events far into the future...like mortgage payoff.", "This product is easy to set, reusable, and has a plastic window where you can add a label. Fun item."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,413
|
Yes - connect RCA plugs (male) into RCA connectors on stereo - any EXCEPT phono - and you're set to go. I leave plugged as described so I can quick connect to home stereo.
|
{"question": "Can you use this cable to hook up ipad to a stereo", "document": ["We have an older model stereo system and this works perfect to hook our I-Pad and smart phones to. Made with heavy duty plugs for long lasting.", "I've been using the cables since I got them. I use them to connect my I-phone to my old stereo system: great combination between new and old technology. Love it!Recommend highly.", "We needed a way to hook our iPhone 4 up to the stereo system for a party. We did a fair bit of research and decided a connection utilizing the headphone port would provide the best sound. The Mediabridge RCA adapter was inexpensive and did exactly what it was designed to do! The sound quality was excellent with no distortion, and everyone was able to jack in their phone to share their favorite music. It was the perfect solution to the problem! Thanks for providing a quality product!", "I wanted to play my ipod through my stereo, and I am not technically savvy at all, but after looking online for what kind of cord to use and where to plug it into my stereo, I bought this cord. Not only was it the least expensive, it did the job perfectly! And I was pleasantly surprised to get an email from the company the next day, letting me know they are there if I have any questions. You can't ask for better service than that!", "This is just what I needed to hook up my iphone to my dj controller. Quality cables. No crackling sounds when I move the cable or phone. The RCA end is very tight. I have yet to remove the plugs hopefuly it won't damage the female end.", "Since I teach yoga classes, I needed to be able to connect my iPad to a control panel at the studio that I teach.This cable is very well made and has not fallen apart like some of cables that my fellow teachers have purchased.I would recommend it for it's performance as well as it's durability.", "This cord appears to have the highest quality. I am quite satisfied with the materials and the workmanship and finish. But I'm not an audiophile and I am wondering if the use of the cable is appropriate for what I wanted to do with it.I bought this to connect my iPod to my Denon 4800 Amplifier. It works well enough, but the sound level that I get from the cranked up iPod is less than that which I get from a comparable CD.", "I ordered this cable to use for Skype on my TV to stay connected to a friend from my church's small group. Great way to hang on to a friend! The cable works great, the cost is minimal so we are all very happy with the outcome. When I order any adapters, cables, etc., I always go to Amazon first to get quality and best pricing! Plus the delivery is FAST!", "Product works great! I use to connect the RCA cables in my car to my Android smartphone. The RCA cable connection is by the cigarette lighter in the back of my Infiniti. My 7 year old goes across the back of the car when coming in and out which caused the old wires to fray.Installed the new ones from Mediabridge and even my 7 year old could they were of a higher quality than the Radio Shack style cable. Sounds great, looks like it is going to last.", "So easy to hook up my old cd carosel and old cassette tape deck to my soundbar. Just what I needed."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 139,422
|
if you unplugged it and plugged it back on, and nothing positive happens.....throw it out! panasonic makes garbage dvd players. it is not the panasonic of the past. i keep 5 dvd players in the house, cause i am a movie buff., and in the past i've had all panasonic players. those days are over. i have one panasonic player left and that hiccups every eight minutes on recordable discs. on your problem, maybe you can contact panasonic.com or call them and they can send you, or you can download their software update. it didnt work for me, but it might work for you. if mechanically inclined, and not under warranty....you can take off the cover, unscrew the carriage cover and remove the disc. also sometimes, if the disc is not in the slot correctly., it could jam up, and shut itself off. my dmp-bd871 played well for 4 months, and now it will not accept any disc. i will admit, that before it went kaput, it had the best picture of any other player i've had................irene
|
{"question": "Anyone have this player lock up, powered off, then it wont power back on ?, cannot get my Conjuring disc out.", "document": ["Wish i had not bought this. 1) It has poor ability to read smudged or SLIGHTLY scratched discs. When i switched to this player a number of my previously perfectly playable discs now generate a \"Disk unreadable\" message and this player wont play them. Put them back in the old player and they play fine. 2) It cannot play discs at a higher forward speed so you can move ahead to look for something.", "As many have already said, this player will lock up a lot. It does it for me when attempting to access Netflix. It will say that's it's not able to connect, then you simply can't get back to the player's menu. You have to unplug. I've had pretty decent luck with Panasonic, but they skimped on something to get the price down, and whatever that was, it's was vital for normal operation.", "Haven't found one yet that works actually.-Poor button design on the device:-Power button is next to the disc tray, yet the tray eject button is on the opposite side of the player.", "It freezes constantly and you have to unplug it and plug it back in. It wont shut off. It wont play half the time. This thing is junk...spend a little more and get a better one!", "If you keep hitting the Play button on the remote, it will get you to the Play Movie Page, but this is only an additional annoyance.And as one other reviewer mentioned, it will on occasion Lock-up to where you have to unplug the player to reboot it, and then it will respond.", "have had this approximately 90 hours. Initially, there were DVD menu freezes, streaming freezes, then a notice popped up for a firmware update. After updating, it freezes more often than before, and has gotten to the point where even the power button on top of the machine won't work. In order to get back to the menu, you have to physically unplug it, then turn it on, at which point it will freeze when trying to access the network.", "Freezes when playing the movie Brave. Exchanged the movie, but replacement freezes at same location.Latest firmware installed.Trouble is, when it freezes, you have to dig behind your cabinet to \"unplug\" the AC cord from the outlet. The cord does not remove from the back of the Panasonic player, so you have to get to the AC outlet. Pretty pathetic design.Also agree with another reviewer who said the \"Top Menu\" is not easily accessible.", "I bought this to stream Netflix. I have 2 routers and this dvr will not connect to either. It has an annoying lock screen that makes you enter a 4 digit password or you cannot install it. However entering the password didn't work either you keep getting the lock screen. It has a netflix button on the remote and I subscribe to netflix streaming but it will not connect to netflix no matter what you do. Makes me wonder if this Piece of S*** was ever tested and ever works anywhere.", "Only way to get it to respond is to unplug it and plug it back in. Also, when it does work it is very, very slow. Navigating the menu is horrendously slow. I've seen slow UIs on these things before, but this one takes the cake. Avoid this model at all costs!", "I just bought this DVD player. Turned it on with the remote. Went through the setup. Turned it off during a firmware update because it was taking too long. Now, the machine will NOT turn on, with remote or the switch on the machine. I have unplugged it for a minute, still won't work. I am taking it back right now."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,441
|
I called their customer service and asked about the particular product I ordered. In my case, they don't even make the unit with chrome shelves in the size that I bought.
|
{"question": "The model Number on the back of the dehydrator indicates I have chrome shelves. However, I ordered stainless steel shelves. Please help. Also, the instructions say there is a warranty card in package but I could not find one.", "document": ["Furthermore, given that most appliances these are sealed boxes that one does not dare to open I'm pleased to say that the TSM design is simple and functional. All of the electrics are easily visible through the fan vent at the rear and also inside the unit once the stainless food trays have been removed. Should the element ever burn out it looks like a standard item I could get at my local electrical wholesaler.", "The dehydrator arrived within a few days of ordering the product. I tried it the next day dehydrating carrots. I noticed the timer didn't work. I contacted customer service and they immediately sent me the back panel which included the timer. My husband exchanged the panel and I now have a working timer. Other than the timer issue all is great with the product. The stainless steel shelves were the reason I bought it to begin with and I wasn't disappointed. It's well made.", "A stainless steel food dehydrator with free shipping-could I ask for more? No! So I bought it. I wanted a dehydrator that was bpa free so I decided on this one. I was thrilled with I found this-exactly what I was looking for.", "I bought this model because:- it is all stainless steel (I didn't want to dehydrate my food on heated plastic);- it is beautiful to look at;- it received multiple positive reviews on this site;- it has large stainless steel shelves with a 1/4 inch grid (not on all TSM models);- it has a timer.I would not buy it again because:- it is very noisy! The unit gives off a loud rattle periodically.", "I almost didn't purchase this based on other reviews of the 'noise' and being so loud you could hear it rooms away. I think those people got a defective model. This one was purchased USED and it is SILENT - I mean really quiet - I can barely hear it 10 feet away, whisper quiet! I looked at the excalibur model because friends were thrilled with it - but I was very disappointed with the plastic trays and the plastic coating INSIDE the dehydrator.", "Though there is a guide on the machine showing which temperature to use for what you are trying to dehydrate, it's not very accurate and I had success my first time using it because I had a thermometer showing the interior temperature. I live in France and was able to find one online here, so I'm sure there are plenty of options in the States.I recommend getting a good Dehydrating book--I really like the Dehydrator Bible.I also recommend getting the sheets so that you can make fruit leather.", "It's my first one, and I'm very happy with it and expect to be using it for many years. Love the fact that it's stainless steel and not plastic. This would be a 5-star review if:(1) the controls were located on the *front* of the machine where they could be easily accessed and seen;(2) the side edges of the front cover were thicker or rounded off (thin metal poses a cutting risk)", "Seems like TSM has been taking note of customer reviews!I have never written a review and buy from Amazon like it was my neighborhood walmart. So I must say I am pretty impressed with this unit. Unlike the one shown in the pictures there is an updated model of this unit (#30104 D-5) which has addressed most of all the issues that people talk about in the reviews.", "This dehydrator is made with great quality. The stainless steal is greatly appreciated as is the spacious interior and moveable shelves. There is a lot of flexibility within what one can do with this machine. The only drawback would be its size. It is quite large. I put it in my basement on top of my dryer, where it quietly does its thing.", "When researching which dehydrator to purchase the TSM Stainless Steel dehydrator stood out for a number of reasons:- Front loading square design. Apparently there's a tendency for food to fall into the middle of the cylindrical style dehydrators.- Durable stainless steel construction. The Excalibur which everyone raves about is in the same price range and in made out of plastic."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,478
|
Yes, it is. I used it to access a Windows 7 drive in which the computer tower had burned in a house fire. I plugged the Win 7 drive into a Windows XP tower as a secondary drive. When I turned the Windows XP computer on, it started normally and showed the damaged drive with no problem whatsoever. I retrieved all data on the damaged drive with no loss of files or data at all.
|
{"question": "Is this compatable with Windows XP?", "document": ["Probably most desk top computers will have enough room behind and now your old Molex and 40 pin cable go directly into this adapter. I have used it to hook my new SATA 1.5 TeraByte Seagate disk to a 2005 K8M800-M2 mother board using XP. Beware of large drives (greens) using advanced format which complicates using windows XP. My 1.5 TB Seagate does not use avanced format and can be easily partioned into 15 alphabetic drives of 100GB using this adapter and Windows disk manager.", "Can't for the life of me figure out why someone can't make this interface recognizable faster...the boot time is degraded by 75%. At first I thought the thing was a dud.... As soon as I was about to press the reset button 2 minutes later (after turning on computer) i see the HDD LED start flickering. Then it booted to Windows fine. I threwit away...it wasn't at all benficial to me.", "I got a SATA hard drive by mistake, so I figured it might be easier to just order an adapter to make it work. I was trying to use the hard drive in a Compaq Presario SR5110NX. Well, I tried to install Windows 7, but failed after several attempts. Then tried to install Linux Mint 13...it too failed to install. The indicator light for the hard drive lights up, and the computer is able to identify partitions, but that's about as far as it goes.", "works. a bit bulky, could be made smaller, but it does work. would rather have seen them use the smaller power connector that normally goes to the floppy.", "works in original xbox, but slows down boot time. Form factor the best you could hope for. Taking away 1 star for boot time, taking away another for not knowing what the jumper does. Not info came with my purchase.", "tried in several applications and computers and could not get it to worki dont know if it is only for certain computers but it didnt work for me", "i used this for my old computer but now i have a newer computer so i really dont need it but when i used it it worked perfectly and recognized the device. no problem.", "i tried to connect to a sata motherboard but the hard drive could not be recognized so i could not use my old drive", "i ordered another one because the product was so good to use that i needed a second one. way to go", "i have several computer hard disks. i tried it with an enclosure, it only worked with one. i tried this one, it also worked with the one that worked on the other enclosure. so i guess that this thing works."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,484
|
Yes. It works on all sizes of cans. It is a great little device!
|
{"question": "Does it work on extra large cans", "document": ["I got tired of giving precious counter space to my electric can opener which can be annoying to work if you don't place the can's edge just right. This old school can opener with new features works great. It cuts just below the rim, then you lift the top off with the built-in plyers, the opener stays clean. The extra large turn key is smooth to turn.", "The day I finally threw it away, it left a large number of shards and bits of metal all over the top of the can, the opener, and the counter.This can opener is really pretty expensive, which means I'm extra cranky that it worked so poorly. I will grant that it is in fact quite comfortable to hold and the handle is easy to grip! But that's not worth much when it doesn't actually open cans.", "Does not work for me. I was looking for a can opener for large cans. I am a caterer and need a can opener for large cans. This truly does not work. Don't even try it.", "I bought the Zyliss can opener (awesome!) and saved some money.Be warned...this might work on large cans, but it didn't work on the small cans. The Zyliss can opener works great.", "These work very well. I got these with my wife in mind, the large knob looked like it would work well in a small hand, and it does.It opens the cans very cleanly, with out a hitch. The only down side is that some times you have to pop the lid off with your nails. This is because the opener cuts the lid on the outside edge so there's still some gripping edge. It's not a big deal though.", "I don't open cans too often, but when I do - this is the easiest, least messy, and maybe the quickest way to do so - However, all of this applies only if I remember how it works! Does take up some extra space on the counter.", "\"After a year: \"The can opener continues to impress, but I have noticed that some cans tend to require extra turning--2 to 3 times to open\"Now:The can opener is effectively worthless at this point. I had to use it today almost like I would a pair of tin snips to tear off the lid of the can.", "I have used it on large cans and smaller cans and it works great.I haven't tried it on the really small cans (tomato paste).", "this is very comfy and easy to use. no sharp edges to worry about, i now allow my toddler to help open cans. it works well with cans of all sizes very small to very large.", "I cannot open cans with this can opener!! Do not buy. The issue is that it makes a cut and it is not visible, sometimes you do not know where the place is to remove the can; also you have to make 13 manual turns for a small can and 26 for a large one. I'm throwing this away!! !"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,490
|
Could, but the arm extensions and bottom braces could get in the way if the self was narrow...but then for a wide shelf, prob 1.5 ft or more, good idea that I had not considered
|
{"question": "Could this unit be mounted upside down, to use in a wall cabinet as a pull-down shelf?", "document": ["The installation of this mixer lift was not as difficult as some of the reviews stated. It took about 3 hours, mostly measuring and pre-drilling. It seems to work great. There are 2 things to look out for.1. I mounted a 14x22 inch board to the supports but when I put the shelf down, the back of the shelf bumped into the back of the cabinet. In my case, this cracked the face of a wall outlet mounted on the back wall.", "Shelf lift works perfectly! We are using it to hold our Vita Mix blender, and easily pull it out and put it away each day leaving our counter clear. The installation took my very handy husband 45 minutes. He found the instructions clear and easy to follow. As we have wood cabinets with a frame, he inserted a spacer between one lift and the side of the cabinet to ensure it was braced solidly. This makes the side where the lift is mounted one inch thick (on one side).", "This shelf is SO WONDERFUL! I have the large 6 quart kitchen aid and I could never leave it on my counter because it was too large and now I just pull my releases and like magic it disappears into my cabinet and I have tons of counter space to work. Every woman needs one in their kitchen. It was very simple to build in. We made an outlet in the back of the cabinet so that the cord stays inside all the time. I should have had it 20 years ago!", "One could make the shelf not as long but the width is important. Spring tension allow adjustments for weights between 10 - 60 pounds. There is also room under the mixed when it is lowered into the cabinet for some storage, say aroung 5-6 inches in height. I am planning on a pull out drawer for underneath the mixer. Almost had a recepticle installed inside the cabinet but then relized it would be a nusiance to plug/unplug.In short this worked much better than expected and is solidly built.", "Per the other reviews, the shelf was easily installed by our cabinet builder. The unit easy raises and lowers but wobbles severely when my Kitchen Aid mixer is operated on high. It took my full body weight on the unit to ensure that the mixer would not fall off the shelf when in use. My cabinet maker and I have tried numerous installation adjustments without success. We contacted the company for assistance but have not received a call back (now over 48 hours later).", "This makes it so nice for my mixer to not have to be on the counter. It is very easy to use. Pull the shelf up with 1 or 2 hands and then push the buttons on the side to release.", "I mounted one of the side mechanisms to the workbench board and kept adjusting its location so the shelf would provide internal clearance as well as come out and be just a little above parallel with the countertop when extended. The top surface of my workbench simulated the top of my countertop slab. This took a little trial and error, but it certainly was easier than trying to do this inside the cabinet.", "Of course it was almost midnight when they started so being a bit exhausted may have contributed to their difficulties.The mechanism requires a bit of cabinetry space. We mounted the hardware onto a store bought cutting board (you must supply your own shelf-this kit is only the mechanism) and had to trim it to approx. 15\" for an 18\" door opening. So both sides need about 1.5\" of clearance for the hardware. This was installed in a base cabinet without a drawer.", "This shelf hides the huge stand mixer that I love, but do not love sitting on my countertop. With the pull of two levers, it lifts very, very easily and smoothly up to countertop height and locks with a audible clank so that you know it is secure. Pull the two levers again and it lowers into your cabinet in a very controlled fashion.It loses a star because the setup was very difficult for my husband and the carpenter working on our kitchen remodel.", "heavy duty and well designed - looks great once installed - Directions should be better worked out - I had a better time understanding them by watching a home made you tube video showing how to install them than deciphering the instructions on this one - on the video at least I could understand why to put the marks where you should. In the end, it looks and operates great - very happy with this unit."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,517
|
i use mine as a home recording studio, so you should be able to play this no problem. (SYSTEM REQUIREMENTSMINIMUM PC REQUIREMENTSMinimum CPU Type: 486DXMinimum CPU Speed: 33 MHzMinimum RAM Required: 8 MBMinimum Hard Disk Space: 6 MBMinimum OS Version: 5.0Graphics Type: SVGAColor Depth: 256 ColorsFree Conventional Required: 470 KB) heres the specs if you need them, hope this helps.
|
{"question": "Would I be able to play Steel Panthers on this computer? It's an old computer game!", "document": ["Product seemed old and outdated, couldnt get it to connect to my wifi network, I wasn't happy with it, returned it and there was no problems doing so. It's not that it was a bad product, I won't know if it was or not because I just returned it, and it wasn't an issue with the seller, it just wasn't what I was looking for. I wanted a modern up tp date style laptop for school, thought this would work but it's more of a basic business model.", "The old thinkpads, including the early ones made by Lenovo, have to be among the best designed laptops ever made. Easy to replace an optical drive. Easy to replace a hard drive. Such a contrast with my old Apple G4 iBook, which I dearly love, which has a disk permanently stuck in a broken optical drive. The cost of replacing the optical drive on that machine would be more than the laptop is worth. The T60 keyboard is every bit as good as the g4 iBook keyboard.", "I bought this computer for my 8 year old son. I home school him and his older brother (14), and so he really needed one of his own. It's not a super, top of the line computer... could use with a larger hard drive, but considering this baby came out in 2007 and came used, it's a steal. Within a couple of minutes I had it online, had firefox installed, and was watching a youtube video to test it out.", "this is a great computer ..I was looking for a laptop that was cheep and that I could carry this fit the bill but was much better than I through it would be. Fast start up .run really well screen is large and clear. So if your looking for a Great computer and don't want to spend a lot of money >> Here it is", "I would highly recommend this seller, as the delivered laptop was much better than the generic ad, and all we had to do was hook it up to the Ethernet cable, and boot it up. Really great value for the money, fast shipping and good packaging, and zero hassle.", "The 4:3 aspect ratio screen is the best screen I've seen since my old Compaq Presario 1215US from 2001. One catch to warn about is the volume control on Windows 7 Pro. The Windows volume control gives you only the percentage of whatever volume is set by the volume buttons. I suggest setting the Windows volume control at 100% and then using only the thinkpad volume control buttons to set your volume. I was almost fooled by this glitch into thinking my T60 had defective speakers. It was a Microsoft problem!", "i ordered this laptop on monday and got it on friday!!!! (i am actually doing the review of this laptop on it) It may not be the latest technology but it is good enough for me so i am really enjoying this laptop, I would recommend getting 1 of these if you just need a good laptop that won't give you alot of trouble", "When combined with the fact that the advertised power shortage was no power cord, this would have left a purchaser without a previous similar model without any source of power at all.The video card was so regressed Debian fainted and could not install Gnome.This seller has decided to sell laptops stripped of everything that can be resold and leave it up to the purchaser to find that out. I would not buy from them again.", "You get what you paid for, and I paid for something that would be functional and let me get my work done. It came with Avast Antivirus, which I decided to leave on, since I've had Avast before and so far haven't had any problems with it. I might switch to AVG at some point, but for now, it's fine.The battery life is fairly good - I've had this since December, and the battery still charges quick and has pretty good life off the charger.", "I used this computer for its display and case to make two working computers from three broken computers. A very good deal."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,531
|
Yes it has a very small magnet to hold caps in place. Not a lot of experience with other brands but this seems to be the best I have seen
|
{"question": "Does this capper have a magnet to hold the caps in place?", "document": ["This Italian company makes two different capper models.The one pictured (at the moment) in the main listing picture has black plastic pieces that secure the cap in place (towards bottom of capper). This is actually the "art 108" model, and is designed for caps that are 28.5mm (a little bit bigger).The one that they are sending has red plastic pieces that secure the cap in place.", "Best hand-held capper I have ever seen. DRASTICALLY better than cheap plastic cappers, heavy-duty. Also, this thing clicks into place when cap has been seated and crimped properly.", "Works wonderfully and is much sturdier than the standard plastic capper that came with my brew kit. Note that it leaves a circular indentation on the top of your bottle caps, but that doesn't bother me at all.", "Metal construction is very sturdy much more so than plastic body cappers, how ever it should be noted it is meant for 26.5 mm caps and is not adjustable. Definitely a worth while upgrade from the smaller plastic body capper.", "This capper worked great! I didn't shatter any bottles. This is not a bad thing but, the caps will have an indention in the top of the cap where they were pressed down, so the caps wont look like store bought. It just makes it easier to identify homebrew, I think.", "It's not crazy ugly.And yes, it would seem that it does tend to get stuck to the bottle after securing the cap in place, but a "very" small amount of force usually releases that. Perhaps the StarSan lubrication trick might work?", "So, it's basically a normal capping cone but with maybe 8 or so vertical slots in it. I guess it helps to remove the bottles. I don't know if it's potentially dangerous or not, but about 3 pleats of the cap wind up going in these cutouts and not getting properly crimped. So, the cap winds up being completely crimped except for about 3 creases or pleats. The seal is fine, but I don't know about whether or not that lowers the maximum pressure the cap can hold.", "Tried it out on a few bottles and the amount of pressure needed to remove one of these caps compared to a regular store baught beer felt the same.", "Works great. Even to recap bottles. Used it to make salt and pepper shakers out of my favorite beer bottles. Just drilled holes in caps then re-capped with this rig. Love it!! !", "The Pros: It caps bottles, so at the very least it is a fully functional item. It's all metal, except for some high impact plastic (really feels more like nylon) that keeps the metal from touching the glass parts on the bottles so it's really sturdy. All of the joints are riveted so if it ever fails it should be really easy to repair."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,588
|
Like most kit furniture it's particle board - I'm a 65 year old female & had no problem putting this together by myself. I use it as a workbench for making jewelry, it looks good, suits my purpose and I like it.
|
{"question": "What kind of wood is this made from? Is it engineered wood or particle board?", "document": ["This is a big, heavy bunch of pieces of particle board in a big, heavy, flimsy box with minimal padding. Mine arrived with one corner of the desktop crushed, one of the three trestles broken, and one of the shelves with a damaged corner. Given the packaging, I doubt that another one would survive the trip in any better shape.", "When attempting to assemble I came across problems on EVERY single piece. This product is made out of garbage! The holes do not line up with each other, the bolts that they used are SO DIFFICULT to line up, I spent hours trying to get this together and what came out was a VERY unsteady desk held together with ONE bolt (Because that was all I was able to fit together in the end) and just a few wooden dowels!", "I will preface this by saying: the box that the desk was in was not damaged at all. When I opened to start assembling this desk I found numerous chips and one really bad (and visible) crack on one of the leg stands, obviously made by the manufacturer. I took about 15 photos of different pieces and the damages on each piece of this desk. I bought this item NEW, and what it looks like is that this is a USED item.", "Our desk arrived seriously damaged. Not the stores fault but more so whoever shipped it. I emailed them pictures of the damage which made the desk not even usable since the top portion was cracked right in half. I even contacted the manufacturer who eventually said they were unable to send me replacement parts. This store sent me a new desk immediately. It arrive in one piece and just time for me to do my homework on it! We will absolutely shop here again because their customer service was AMAZING.", "This is a solid/sturd desk, and it was fairly easy to assemble. I would have preferred to have it in a solid/smooth finish instead of the wood grain look, but overall I really like it.", "I searched and read reviews for a good number of similar products before deciding on this one from OJCommerce. I found one I really liked at Target.com for a bit less, but when I calculated shipping it was more than this one on Amazon. It took about 45 minutes for my 24-year-old granddaughter and I to assemble it; we took our time and made sure all parts were included and nothing was damaged before we started. Instructions included were very clear and easy to follow.", "We bought this desk for our daughter who is 8, but it would be fine for an adult as well. Sometimes we sit at it with her to work on homework. Ours arrive well packaged, with all the pieces and hardware. It was easy to assemble and there were no major flaws in the wood or finish. For the price (around $85 at the time) it is a great desk.", "Great quality wood, apperance and well worth the cost. The lower support bar on the bottom was broken on arrival, but amazon sent me a replacement right away. Thanks Amazon, this is why I always search your website first when making on line purchases. Great customer service and return/exchange policy.", "This solid desk looks nice, meets our needs, and was inexpensive. Unlike the product photos suggest, the desk top and shelves have a wood grain while the legs have a matted finish. Our desk arrived with some cosmetic damage to the edge of the desk top due to poor packaging, however it is not worth my effort to return the item and was easy to hide.", "This desk is gorgeous, once you get it assembled. Nice and sturdy. There were a few aesthetic flaws - one of the corners is chipped. A few places are white instead of brown, due to lacking the paint/laminate. Also one part had a crack in the wood around a screw hole. Most of these things are not visible once assembled, though. Overall I would recommend!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,602
|
Yes it does and it has a nice sound
|
{"question": "Does this really have 4 channels (4 independent inputs driving 4 separate outputs)? Or is it a stereo amp which can drive two speakers per channel?", "document": ["Oh, it has 4 line input clearly marked channels 1-4 and 4 speaker outputs marked as such, but actually what it is is a 2 channel amp that splits its output to two sets of stereo speaker outputs (in parallel).So, if you hook this up to a head unit that has 4 outputs (i.e.", "First off, this is not a bad little amp, for the money. However, yet again Pyle lies about what the product actually is (shame on you Pyle, do you really not know that this is why you have such a bad reputation? ).As most of the other reviewers state, this amp is no where near spec (i.e. it's about 20 watts RMS per channel at the most).", "First of all, all the other reviewers are right. This is obviously not 100w RMS per channel. It has a 10amp fuse and 12ga power/ground leads, so really it cant be over 150w RMS total. I bought it knowing that so I wasn't disappointed. Really, its probably around 30w-40w RMS per channel. I have it in my jeep wrangler yj, I got this because the internal amp in my headunit burned up from water, and WOW!!", "not impresse3d with the amp. Mt head unit sounds just as loud. It is not 100w per channel. Will not buy pyle products again. Thankyou", "The description is a little confusing, since it says it has High-level inputs. I can tell you it does not, at least not in the traditional sense where a speaker output from a car radio get connected to the amp. I purchased this to use with my Harley, which does not have RCA outputs. Given that this amp does not have the high-level inputs I needed, I had to send it back.", "Amp was more under rated than expected couldn't hardley push two 50 watt speakers on my harley, small and compact , seemed easy to install just way under rated", "so this thing is junk. do not buy. not as described and a head unit will put more power to your speakers than this hunk of junk. paper weight... nothing more.been awhile since I posted the review on this and decided to give the little amp another try....... built a new cooler stereo and placed it in the new system...... and stillll........ JUNK.", "The output in my boat is actually louder with better bass response without the amplifier. I only have (4) 6.5" speakers in my boat and by the specs on this thing I should be running it at about 40-50% output power however as I said before the head unit actually is louder than the amp and I only paid $75 for the head unit. Bottom line is - Keep on shopping!", "I mean come on...So, be aware of this before you buy it. I have an email in to their product support, so I'll see what they have to say (if they respond!). If there is some hidden setting to actually turn this into 4 channels, I will update this review.1 star for lying. 1 extra star because it's so cheap and actually doesn't sound that bad, even though it's not loud, at all.", "I installed it in a friends RZR 4 and he was happy with it. I think I have another one sold to another friend that has a Ranger 4 XP. Use this AMP with a coupe Wake Board Marine speakers and it seems to perform decent."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,606
|
It's about 6" wide, 3" tall, and about 3/4" thick.
|
{"question": "what are the dimensions", "document": ["I too was surprised that this radio was as small as it is. I didn't check the dimensions in the ad. But, the size doesn't matter as it puts out BIG sound. It's pretty amazing that this much stereo sound comes from such a little radio. I was disappointed at first that it didn't have a digital tuner, but again, it's my fault for not reading the specs more closely. The tuner does have an FM stereo indicator light and that helps.", "having a line input is a BIG deal. plug in a shuffle or nano and listen to a book in your hammock....lovely!", "good product. I haven't tested it yet in a noisy environment. For 30cm-1m distance, it seems to do a good job.", "You won't be sorry buying this item! All the wonderful comments on this item is true! Was amazed that my mother could listen to her music on this radio so clearly when NO other radio would pick up reception in her room!!!!! Amazing!", "We wanted a small portable radio to move around between the workshop, the truck and the below-grade basement. As expected, this radio (and none of the other radios and antennas we've tried) cannot pick up AM stations here in the mountains.", "We needed a basic AM/FM radio for our dogs to listen to while we are at work. I know that sounds ridiculous, but it helps to have a radio on while we are out of the house. Its very small, which is a plus and it works - it's very basic. The image makes it seem bigger than it is, the only negative is that it seems to go through batteries pretty quickly.", "Wanted a small but dependable radio for the bathroom to listen as I get ready for work in the mornings. This one certainly does the trick.", "This speaker sounds awful. It's distorted even at low volume. The AM/FM stereo gets crappy reception as well. This is the first item I've ever returned on Amazon. I expected much better from a Sony product.", "This radio is ok for its size and price. However, the buttons are really tiny. Hard for seniors to change stations. It's nice to have the line in, but the speakers are not much better than the iPhones speakers.No AC adapter, only takes 2 AA batteries.", "This little unit is extremely durable, has great sound (for it's size and form factor...), and is easy to pack. Very nice that it serves as a speaker system for my MP3 player, but I use it mainly to listen to classical music in different locales when I travel - it tunes in NPR stations extremely well. Dropped from various heights, traveled thousands of miles, looks and feels brand new."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,607
|
I have it in drywall with a 42in tv. better to find a stud for at least one of the screws. But if you can't, I've switched these type of anchors http://www.homedepot.com/p/t/100391938?langId=-1&storeId;=10051&catalogId;=10053&N;=5yc1vZ1xhv&R;=100391938.
|
{"question": "Can it be installed on dry wall? or is it just for concrete?", "document": ["It is a tight back there and a little extra space goes a long way.Now I know this may sound petty, but I have two issues with it.1) The bracket comes in two pieces. After screwing it together its feels solid, but I would have preferred a single piece. It still sturdy on my wall holding my 30lbs LCD TV.2) The Dry wall anchors ARE PURE CRAP because they are concrete!!!!!!!!", "Lots of extra parts included. Hard to adjust the tilt once installed, but I think that is inherent to a wall mounted tv.", "Works great, easy install we just installed one for my mom it made #4 for us. Would recommend if you are not looking for bells & whistles & just want the TV on the wall.", "I bought this product heavily on the premise that it is #1 or one of the best selling TV wall mounts on Amazon. I would not buy this product again, and in fact I am looking for another wall mount soon.Ownership: 2-3 months now, been installed for over 2 months.", "I like it . It very easily to installed . The quality it good . It fit my tv , have no problem at all. The delivery is very fast. Thank you.", "Yeah they are BAD because they are the wrong ones!!!! Go to you local hardware store and pick up some Good nylon dry wall anchors and Pin or Oval Head screws for a couple of dollars. I am mad because I had to buy extra parts. Yes it was a couple of dollars, but still I had to go and buy extra stuff.All and all I am satisfied with this wall mount. Besides those two minor things, it is a good investment and would buy it again.", "Great wall mount, durable", "It works as it is attended to do. I am happy to see my tv on the wall. It creates more space.", "Very nice TV wall mount for the price. Can not beat it. Highly recommend it and it is within budget.", "I paid very little for this mount and it is just as good as those expensive wall mount at electronics stores."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,612
|
I believe someone is selling them on eBay right now for about $25.Alibaba also has a number of suppliers for what they claim is the same item, however they are a wholesale link to China and mostly require a purchase of large quantities. (10 was the smallest I noticed, and one guy said he could deliver up to 90 million [90,000,000] per year.) Good luck.
|
{"question": "Where to replace halogen lamp for Turbo FlavorWave Looking for a source and part number for the halogen heating element in the Turbo FlavorWave oven. Anyone know?", "document": ["The Flavor Wave Turbo does not offer the ability to replace a burned out Halogen bulb. The bulb in my unit lasted just over a year. I tried unsuccessfully to find a replacement bulb on line. The rest of the unit works fine. I'm told to buy a new oven. Here is a manufacturer that is filling our landfills with what should be an easy fix for the American consumer. This is the kind of irresponsible ecological manufacturing we should not support.Flavorwave Turbo Oven", "Before you pull the trigger and order this made for TV product, you might want to do a side by side comparison with the Supentown products. Like Flavorwave, Supentoown has a base model with mechanical controlsSunpentown SO-2000 Super Turbo Multi-Function Round-Shaped 12-Liter Convection Ovenand an \"upgrade\" model with digital controlsSunpentown SO-2002 Digital Convection Oven with Nano-Carbon and FIR Heating Element. Do you notice anything ? Twins separated at birth ? Two brands rolling off of the same production line ?", "We purchased our fourth turbo oven in May 2012 and it was a Flavor Wave Turbo. A little over 7 months it's dead. Except for the sound, nothing else works. It's not cooking. We suspect it's the halogen bulb. This is the second turbo oven that quit on us because of the halogen bulb. We are disappointed but hope that someone can tell us if we could replace it and where and how we can purchase a replacement halogen bulb.", "I purchased a turbo oven and used it often. One day, puff, it stopped working. I contacted the company, but since the warrantee was up, I paid for replacement lid with heating element. I used this new lid for about 6 months. This morning, I put something in to cook and it exploded! There was a white cloud of smoke and shards of glass. Thankfully the lid was on the glass bowl when it exploded and therefore contained. I don't want a replacement.", "I say, phooey on those reviewers. They are nitpicking. Ok, maybe one or two are lemons but that does not mean they all are as the many positive reviews it has received. Lemons are a fact of life, exchange it for a new one or buy something else... no big deal, move on.Overall, it has become one of the best things ever to be invented. It still gets heavy use from my family. Hopefully the heating element will last longer, I don't know.", "Since this is the 3rd oven I have ordered, I am so pleased when this Flavorwave turned out to be what we are looking for..First the bowl is glass and lightweight enough that I can lift it out and put in the dishwasher to clean without being afraid that the top part will tip over like what happened with the Secura model. I also find the instructions and cookbook are user friendly with easy knobs that allow me to dial and time food in a simple and familiar manner.", "Don't be fooled into beleaving that all these ovens contain infrared heating. None of the ovens except the Nuwave oven has infrared heating. I bought the flavorwave oven believing it had infrared heating, but it only has halogen heating. As a result all of your foods will cook on the outside while the inside of the food remains half cooked. I tried cooking a 5# frozen chicken for 45 minutes on each side as recommended.", "I purchased this Flavorwave Turbo oven to replace an earlier Flavorwave Deluxe model that finally gave up after many years of use. We got the first model so that my husband, who isn't particularly gifted in culinary arts :), could quickly and easily cook many frozen meats for our meals when I was recovering from hip surgery.", "It does best to cook your food crispy outside and juicy inside. Secura turbo oven is a newer model, but the core technologies are the same as Flavorwave oven. Had I do not know Secura turbo Oven, I would have given Flavorwave oven a 5 star.", "I purchased the Flavorwave Turbo Oven base model for Christmas. This is the third Flavorwave oven I have owned. The first two had the clear housing that surrounds the food made out of plastic, and over time these break. This Flavorwave has that part made from glass which, barring breakage, will long outlast the plastic version. These are good ovens especially since you can cook fully frozen meat in them that turns out moist, firm, and delicious, unlike when frozen food is cooked in a microwave."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,614
|
i had to return my Fagor. it leaked. this is working beautifully. Very solid construction, takes a minute to learn locking process, but once you have done it, it is a breeze. Extremely pleased.
|
{"question": "For you experienced pressure cooks, how would you rate these pans against the 8 qt Fagor Chef line please?", "document": ["That requires baby-sitting the cooker to maintain pressure by turning the heat up and down constantly. If I wanted to baby-sit a pressure cooker, I would stick with my grandmother's circa 1946 vessel, which still cooks better and more predictably than this one.3. The price is hefty. While I am willing to pay more for a heavy vessel, I find that Fissler is way overpriced as compared to its closest competition in quality, such as Fagor Chef line.", "Before even considering the Fissler Vitaquick line I was convinced I wanted a Kuhn Rikon. The shape of their tops looks really nice. So I bought a KR 6 qt, and immediately knew I'd prefer a set of a larger and smaller pressure cooker- returned it unused. So then I bought the KR Duo set but they were too small at 5 and 2 qt capacities, and the handle of the large pot was loose, so back to amazon they went and I decided to give this set a try.", "I was pleasantly surprised. Here is what I actually received:4 liter pan8 liter panglass topslotted steamer baskettrivet.Given the cost of individual Fissler pressure cookers, I consider getting the 8 litre pan and additional 4 litre pan for another $50 to be a very good value. The other plus is that the inserts for the Fissler and my 10 quart Fagor are interchangeable.", "This is a high quality product. The stainless steel is almost mirror-like, indicative of a high quality alloy. Only the smaller pan has the textured surface to facilitate browning, and it cleans up easily. The glass domed lid fits on both pans so that you can use them as you would use a non-pressured pot. Also, the pressure lid fits on both cookers. The pressure is easily maintained with a very low flame on my gas stove.", "I wanted a new pressure cooker to replace a 20+ year old, made in Canada, stainless, 8 quart, Presto pressure cooker that is perfectly good, just not compatible with my new GE induction CooktopGE PHP960DMBB Profile 36\" Black Electric Induction Cooktop.Pressure cooking is an old technique that is enjoying a resurgence. Because water under pressure boils at a higher temperature, food cooks faster (about half the time of traditional methods; so, less energy, too).", "The remarks about no steam escaping are incorrect, at least as far as the cookers I have experienced. This cooker just muffles them better than others. Any cooker will vent if you put in too much energy.There is no pressure gage! How am I suposed to modulate heat input without an accurate pressure gage? Well, the answer is temperature, of course, but that is only an instantaneous measurement. A pressure cooker with a real pressure gage tells me current pressure and pressure ramp rate.", "The 4L pressure pan is my favorite kitchen item ever. It's practically nonstick and just beautiful! The sizes of both pans are perfect for my family of 5 who love to eat. I love how the pot and pan stack for storage, too.", "Not as far apart as I had thought. Steam tables say ~245 at 14psi local gage pressure. Temps were measured on the main pan using IR thermometer at close range and a tape patch to match emissivity.Bottom line: keeping the clunky old cooker, returning the Fisslers.", "I use this all the time. Food just turns out better. Thick bottom, great heat conduction, the pressure part of the pot really makes meats tender. I would absolutely get another and if someone was getting married soon, that would be the present to give them!", "In 2 uses I have not experienced the malfunctions described by other users (steam and pressure leaks). I wonder if there is a bad batch out there? 4 digit lot numbers are stamped into the bottom of every pot. Two digit week and two digit year. Mine are 2613.Maybe malfunctions are related to user-error? The gasket of a pressure cooker is the key."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,620
|
The standard size cover is 18 inches by 25 inches. It fits standard size pillows perfectly. If you have a queen size pillow, you should order the queen size cover.
|
{"question": "tell me the size", "document": ["I haven't had them long enough to rate the durability, but they appear to be well made. Time will tell if they do the job I expect them to do.", "This pillow encasing was easy to put over my queen pillow and didn't affect the comfort of my pillow like other models have in the past. Also easy care and I can tell the difference in how I feel after a night's sleep.", "This is my second Luna pillowcase purchase for another pillow in the house. Ever since purchasing these pillowcases I have stopped sneezing when laying in bed. You can't even tell its on there either! Thank you Luna!", "To my experience this product is not down pillow friendly. This pillow protector does not allow air to flow through the protector which is one of the main things a down pillow needs. When my pillow is in this product, it feels like a hard rock when your supposed to sink in, you can definitely tell the air does not flow through this sufficiently.Also the terry part of the outside of this is very strong and able to be felt too much.", "With the size of my adjustable bed this cover fits fine and doesn't come loose on the corners like sheets do. This helps the sheets stay in place", "Needed a new cover for my ridiculously expensive new pillow. The queen size cover was a perfect fit. It washed beautifully as well.", "The Luna zippered pillow cover is exactly what I wanted, and at a good price. The Queen size fits a thick standard-size pillow very well.", "Nobody else had confirmed this, so felt the need to post. This fit my medium height, queen size, Tempurpedic pillow. The fabric has a great, terry cloth-like feel also.", "True to it's size. Great quality for the protectors, great customer service and care. I ordered from 2 different popular companies for the pillow protectors; After overall comparisons, I'll definitely come back here for my next order.", "I have a pillows one calls an investment of sorts since it was much more expensive than what I normally buy. It is Queen size, so I was trying to find that size after the zipper split on a cheaper King size cover I was using. This fits perfectly. Of course, it is also a bonus that it is Made in the USA."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,639
|
I have a box spring and about a 12 inch mattress. These end about 4 inches below the first shelf. My only suggestion is to take a black marker after assembly to the back 1/8 inch edges so it blends in. Overall, I love this headboard for the storage No end tables needed!
|
{"question": "Does a mattres AND boxspring fit under this headboard or is it matress only?", "document": ["This headboard is the perfect fit for our small master bedroom and we still have plenty of room to walk around it. It is exactly as pictured and is well made. Very happy with this item.", "It was a good solid headboard. I would have preferred a stronger base as it sat a little crooked because of the baseboard trim. I ended up selling it because my new place did not have a long enough flat wall. If your room has windows, measure before buying to make sure it will fit well.", "I have the black queen-size version of this headboard, with the black platform bed that matches it. It is an okay headboard on its own but it does not fit correctly next to the bed no matter how you position it, so that they bang against each other somewhat whenever you move. Also, it has a problem with collecting what looks like dust but isn't (just age/wear?)", "Fairly easy to put together and fit into king size headboard brackets perfectly. I appreciated that the pieces directly behind your head dont go all the way to the floor (a couple of inches shy) so that you can put cords under there for the alarm clark or what have you. Very important since there are no holes in the back of the unit to fish a cord through.", "This is basically an Ikea quality headboard, and you can probably find something similar to it at Ikea for less money. To be honest, I picked up this headboard because I have an Amazon Prime membership and I get free 2-day shipping. Also, I didn't think I could haul something like this in my Honda Fit from Ikea.", "This headboard looks really good. It worked great for me as I have a lot of books (was able to fit about 40 of them in the spaces provided). Assembling it was fairly straight forward and took roughly an hour. The only suggestion I'd make is to have the instructions in color. I got one piece backwards (the bottom shelf) and I was at the point of no return. I fixed it by just buying a small can of black paint and painting the exposed wooden side.", "Prepac BSH-6643 Sonoma Double / Queen Headboard BlackI bought this headboard, the platform for the bed, and a dresser from \"prepac\" for my 17 year old son. It is typical assemble at home furniture, but it is attractive AND it was shipped within two days.", "I purchased the whole set (platform storage bed and nightstands) and i really liked this headboard. honestly, this would have been the one thing i would purchase again -- not due to the others being good but because i love this headboard. i was nervous because my bed is under a window, but the top of this comes right to the sill on the window. the only complaint i would have is that with the boxspring on the storage platform the bed comes up EXACTLY to the cubbies.", "I do not know if it will fit another king bed, but I wouldn't risk it seeing as it doesn't fit its own counterpart.", "Fit our king size bed perfectly. Only downside is that there are no screw/bolts holes to attach the meatl frame we have so right now it it being kept in place by the bed."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 139,642
|
I don't believe it is I have checked it against the serial numbers
|
{"question": "Is this one of the Units being recalled because of a fire hazard?", "document": ["This humidifier was a replacement for a Kenmore that was recalled due to possible fire hazard. So far, so good. Easy to use, efficient, and quiet.", "Purchased this dehumidifier for our somewhat damp basement. It is very effective at removing moisture, but I'm glad I don't hang out by it because it's a bit noisy. One thing that concerns me is that it was made in China and they just recalled a bunch of Chinese made dehumidifiers from various brand because they would catch on fire and burn people's houses down. If were made in the US and I could be assured of its safety, I would give it five stars.", "I would recommend it (& Amazon) to anyone interested in purchasing one of these units on-line.", "(Same on both units.) Because of that and the one that rattles, I give this unit 4 stars instead of 5.", "Very fine dehumidifier. I have owned others previously and this one works at least as well the others. Only reason I didn't give it 5 stars is that it isn't quite as quiet as my other units.", "I have had the dehumidifier for only a few weeks, but it is working very well. There was no problem hooking up the power or the drain hose. Programming the initial settings was slightly confusing at first. There are no buttons: you press the label. This is one of the few units that has a 5-year warranty on the compressor.", "I purchased one of these units for use in my home and had great success. After reading the other reviews I was a bit concerned about ease of emptying, but found no problem with it at all. The unit is quiet compared to the one I was replacing and is serving my purpose very well. Item is easy to unpackage and set up.", "This is my 3rd Frigidaire units. Amazon delivered on time and the unit works just like my the other two 70pt units. The oldest one is 5 years old and still working woderfully. The other name brands only good for 3 years. If I need another one, It will be Frigidaire from Amazon again.", "This unit is very nice... It is sturdy, very easy to empty and is much quiter than the older units. My only regret? I wish I would have bought the larger one. I would highly recommend this unit.Update, 5/8/2014... This dehumidifier is still going strong. No issues, and working like a champ.", "I have had two other Frigidaire dehumidifiers for 12 years. One of them recently quit working(the motor locked up), the other is still working. Both units are used in my basement. This unit is designed for a larger area than the other units(approx. 2700sq ft). I am very pleased with how the controls work, the unit is much more quiet than the older units."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,644
|
I use this drive as my BootCamp (Win8.1) on a new Mac Pro. I keep it up in a wire trough under my desk. I have been through the wiring a few times, and have not noticed this drive to be warm. I think the moving drives generate more heat than the SSDs.
|
{"question": "Does this rugged Lacie external SSD drive run cooler than the regular Lacie HDD rugged external drives?", "document": ["This might be the closest thing to a perfect drive. Dual connection options (Thunderbolt and USB 3), rugged case, SSD speed. How could you hate it? My only complaint was the price, but let's face facts, SSD drives are still the exception and not the rule. The only downside (if there is one) is that the drive can definitely get warm! But that's not a major issue, just something to keep note of when you go to grab it after fairly heavy use.", "i got this to ad some storage for my 2013 macbook pro retina. its got 756gb of flash SSD built in so i thought this would be a good supplement for extra memory. Im a photographer and i figured i would backup and store all my photos onto this. So far its worked great. from my macs SSD to this SSD is insanely fast, somewhat comical compared to my old computer and old external drive.", "Got this to add a bootup SSD drive to my 2011 iMac. Amazing and fast. Maybe not as fast as having an SATA3 drive sitting on directly on the bus (as they get, reportedly, up to 600 MB/s read/writes, but according to Blackmagic Disk Speed Test, I'm getting 298 MB/s writes and 378 MB/s reads.Also, install TRIM. Prior to that I was getting half the write speed.LaCie made this EASY with this GREAT product.", "I have had multiple Thunderbolt drives in the past and I was never really very impressed with their speed, but this thing was very quick. Moved my 170GB library of pictures, documents and music in about 15 mins or so. Smaller than other rugged drives, and includes a Thunderbolt cable in the box. Best part is it is USB3 too, so can work with other devices.", "This external drive is fast and appropriate for photography. Nevertheless, I have confronted 2 issues. It seam to wind down after a while and applications like Lightroom and Photoshop will give errors or completly go unresponsive when this happens. On my windows computer I have to disconnect the drive for startup becauses it will hang in the initial bios screen if connected.", "I have a 2012 Imac 27", it started running somewhat slowly after just a few months use. After some research, I found that the bottleneck was the internal hard disk (dropbox+crashplan+spotlight = RIP).I bought two of these drives, one as boot drive and the other one for documents, and must say I will never go back to spinning hard drives!I did ditch the orange rubber though.", "I use this drive to transferring footage from set. It's writes quick and allows for us to quickly dump footage off of the camera media.It's the perfect drive to edit off of, other than the storage space is a bit tight. It works as advertised, can't wait for larger SSD capacity!", "I love this thing. It is so fast compared to my hard drive. It comes well protected with a orange flexible stretchy material to protect. It came with a cable, and was recognized by my iMac immediately. Looking for a 256 GB SSD, this is the one to get. It is fairly quiet, and did I mention Fast? It is fast. about 385 mb/s reading stats I got. not too bad. Highly recommended for everyone.", "Had a LaCie in the past but the firewire interface when bad. Still using the USB interface - not as fast as the firewire.Moral of the story also purchase device with at least more then one port.", "what a great product. cost a little more but it was well worth it. quiet and extremely fast. i transferred about 23GB of music to my Lacie HD in a few minutes. very happy with this product. well worth the price."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,653
|
Have not had to change it yet.
|
{"question": "How often do you change the motor filter and the AirClean filter?", "document": ["Miel vacuum cleaners and their replacement bags are not cheap, but they are worth the money. I always buy these original Miele bags because I don't trust the imitation ones. These have many layers of filtration, are very strong, and hold a lot of dust, dirt, and pet hair (I have cat who sheds year-round! ), so you don't have to change bags very often.", "These are good. I mean that it's the right item for the right vacuum cleaner.I have dust allergy - so this bag + hepa filter - no problems with vacuuming and changing the bags.", "If I had to change bags every two weeks, forget it, but since they last so long, I can justify the high price of these.", "These cost more but are worth it. I'm all about not buying OEM to save a few bucks, but in this case, you wont be sorry. the first time you change an overfilled bag you'll understand...", "The order for replacement AirClean FiltertBags for our Miele Canister Vacuum Cleaner came on the day promised. No problem at all.", "If Miele in and of itself wasn't enough, these amazing bags are perfect gilding for the lily. Allowing maximum airflow for peak suction and designed to reduce all airborne dust, dust mites and allergins these bags are highly recommended. Easy to change, very durable and well priced, nothing but the best for my White Pearl.", "I am using these bags with my Miele Capricorn S5981 and like them a lot. They are extremely well made and in fact so substantial-looking that the first time I looked at them I thought surely this was a permanent bag and the actual dust collection bag would be inside it separately. Not so - these are in fact the bags you change out. Very impressed with that.", "I tried the Filtrette bags and came back to Miele. They're just better.I know they're expensive, I know there are alternatives (including a broom and dustpan if you really want to go back to basics), but if you spend the money for the best vacuum, why not use the best bags?No dust escapes, even when you change the bags. And they last a long time, even when jammed with pet hair like mine.", "I have owned a Miele vacuum for several years and it has never lost it's original strong suction. Replacing the bags and filter is easier and far less messy than emptying and washing a plastic collection cup. I purchased the vacuum locally and was offered a lifetime discount on bags, but 10% off doesn't offset the cost of driving across town, dealing with the 2+ years of road construction in that area and fighting for a parking space.", "I love My Meile, it is quiet as I'm deaf in one ear I can hear music, someone talking to me, and the lightness as I'm not well. I also like the filter it is the best. I cannot think of anyrhing that could be added to make it a better machine! It cleans fast and feels so light I just love everything about it. I even came in 2 business days and that was during the 4th of July week!Thank you so much!Bubbe"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,663
|
Yes they do. It is more of a permanent piece of furniture that will grow with my granddaughter, and she loves it.
|
{"question": "I am thinking this could serve as a desk and vanity. Do side the mirrors fold in all of the way to cover the large mirror?", "document": ["We looked everywhere for a vanity for our 5 year old. We wanted something sturdy, cute, and big enough to last a few years. This vanity is everything we wanted for our daughter. She loves it. I love the side storage compartments and the three mirrors. I was a little concerned about the mirrors since they are not real glass but you can't even notice the difference! This is the perfect vanity for a young girl.", "This vanity looks great once you get it together. I gave it 3 stars because soem of the pices came cracked. It wound up being pieces you don't see when it's all together so I didn't bother trying to get them replaced seeing that it took awhile to put together. Also after putting the mirror on I realized it should be moved up some because if you continously open and close the mirror it's going to eventually wear the desk part becuase it slides against it. Felt is was a little overpriced for the quality.", "We purchased this for a present for out 3 year old daughter. Upon assembly some of the fastener did not tighten correctly and broke the particle board.The felt pads on the mirror have already come off and leave big black marks across the top surface of the table that are sticky and difficult to clean off.I wish I could get pictures of the mirror but it is very thin (maybe plastic??)", "My 6 year old absolutely loves this vanity mirror. She spends so much time sitting at it and has all of her brushes/make-up lol. The cubbies are perfect and has kept her room neat. She also loves doing homework on it. It is surprisingly durable. I did have someone else put it together as it looked complicated for myself. :)This product exceeded my expectations! !", "I recieved this item damaged laying against my garage door.We waited to open it because it was for christmas.We decided to open it and put it together so we could see if anything was damaged.Three pieces were damaged. We filed a claim and had the pieces within five days.We had it together three days before christmas.Thank You, OJ COMMERCE STAFF AND WAREHOUSEKidKraft Deluxe Vanity and Stool", "My daughter is very happy with the vanity. Overall, very good product. The instructions could be improved. The factor drilled holes on one of the horizontal support boards did not match the instruction image. Also, the instructions omitted the placement of 6 wooden dowels. In hindsight, I know where they should have gone, but it wasn’t depicted on the instructions. The quality of the product is good. The wood is pretty soft so be careful of over-tightening the screws.", "This was a birthday gift for my granddaughter and it ended up being her very favorite gift! The vanity arrived in a box that was falling apart but every piece arrived intact and there were no nicks or scratches. The quality of this vanity way surpassed all my expectations and my husbands too. He has done carpentry work and he commented how well made this vanity was. It was made with good solid wood, good instructions for assembly and a sturdy well made chair.", "I think it is durable, the shelves are an asset and my granddaughter loves it. But I cannot give it 5 stars as it came with a couple of flaws in the mirror and w", "This item was supposed to be a surprise birthday gift for my 6 year old, as a result we held off on assembling the unit the night before her birthday. To our surprise, there were no screws, a leg was missing, nicks and chips all over the desk and no instructions. I can not believe this company does not have procedures in process to ensure that all packages are packaged completely and undamaged.", "For the money paid for this product it is cute, however, it was drilled wrong and wobbles on one side. Seems you cannot get parts any longer either. Very disapointing!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,677
|
You "CURE" iron devices to prevent rust for years as long as the coating is not washed off, or recoated with some type of oil if it gets wet. It does not have to be something you use to cook (like a frying pan) but could be something like a press or iron napkin holder that is cured to prevent rust (and some sticking if used in cooking).
|
{"question": "I wanted to know what exactly is used to \"Pre-Cure\" the press. Just spoke w/ Imusa. It is COCONUT OIL, & can be washed off if you wish.", "document": ["I bought this press for my wife for Christmas because she wanted to start making our own tortillas. The third time we used it, the CAST IRON handle broke in the middle. I have tried contacting customerservice@umusausa.com, but have yet to receive a response. We would definitely have to think long and hard before purchasing another Imusa product.Edit: Imusa responded to this review and very quickly replaced the broken handle. Since then, the press has performed perfectly. I'm raising my review to three stars.", "I Purchased This Item July 3, 2010 I always wanted to write a review of Imusa Victoria Cast Iron Tortilla Press. After well over Two Years my Tortilla Press still working Great, I remember looking all over for this size and I knew I was going to find it here.", "I like the IMUSA VICTORIA-85008 Cast Iron Tortilla Press Pre-Cured 8-Inch, Black very much. It is very easy to use, way easier than rolling out the tortillas. It is heavy so you will want to plan where you are going to put easy to get to. I wish it was bigger. This requires very little muscle and did not strain my wrist or hands.", "I know, this is a tortilla press and I am sure that one day I will get around to making tortilla's. What did I make you ask? Pita's and it was fabulous. I wanted the over sized version for this very reason. The cast iron is durable, and doesn't crush the dough with all of it's cast iron goodness. It is a win.", "I bought this because I wanted to have fresh homemade tortillas without preservatives. As \"Imusa\" arrived I was very excited. But, even-though I was pressing it all the way down, the tortilla came out too thick. I asked my husband to do it and he as well had the same problem. We ended up rolling it thin with the dough roller. Now it is just standing there and taking away space.", "WOW! This thing is built for the ages no doubt about it. On the other hand it is impossible to get an even thickness for a flour tortilla. I think it would be fine if you are making corn, but I wanted this for making whole wheat tortillas. They are so thick in the middle and thin around the edges that they are more like a flatbread then a wrap type tortilla. If anyone has a better press for flour I'd love to know about it!", "I do like the press but I wish there was a 12 in. because I still have to roll out the dough more to make them bigger. but it does help with the process. It makes it go faster and thats exactly the help I need to feed my family of 8 that eats like there is no tomorrow.", "My only wish with this product was that they made a bigger press. 10" would have been great. But alas, this one works very well. And it's cast iron, so you know it's reliable", "This is a classic tortilla press, stone cold black cast iron of a quality build. Of the multiple tortilla presses I have seen and handled this one comes out on top. The build, feel, quality and weight of the aluminum presses do not warrant their consideration. This press is exactly as pictured and represented. Kudos to the manufacturer in constructing a great product. I wanted a tortilla press to use and enjoy and of a lasting quality to be able to pass on to my to one of my children.", "Also, a large cast iron skillet or griddle (I got a very good 2 burner one from Target manufactured by Lodge Logic for about $40) will be required. Except for obvious defects in worksmanship, I do not know how anyone could have complaints with this product. All the press can do is mash a ball of masa to uniform thinness, and this product does exactly that."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,695
|
Yes, mine came with a subwoofer wire connection.
|
{"question": "Does this come with a specific wire for the subwoofer? Looking at a closeup of the subwoofer connection, it looks like an \"RCA type\" hookup?", "document": ["Overall pretty good and good value. However, note that speaker wire does come with this - this is not listed in the description and I ordered extra speaker wire which I did not need. Also the recommended stands by Amazon did not fit this system, so one should check that before ordering", "Tell them it doesnt work) and ordered this Denon system.I could not be happier. The speakers are small enough to wall mount very easily (heavy duty speakers though). Now when I watch a movie it feels like im at the movie theater. Awesome bass, mid, and treble.I can only come up with 2 cons..1. Have to turn the volume up to 60-75 (out of 100) to really hear the speaking in a movie2. DONT LOSE THE REMOTE.", "The subwoofer is amazing, shaking my chair, the floor and walls during DVD action scenes. EDIT: regarding the subwoofer - the bottom corners of the cabinet are held off the floor by about an inch and they are sharp! You can cut your toes if you bump into the corners barefoot but the fix is easy, just sand down the corners a bit with medium grit sandpaper or a fine file.", "Really good for the money! sound was good but I wanted deeper tighter bass then the weak 50hz sub. Eventually subwoofer would not power on after a week or so and I returned it. Then spent 4x more money on Polk 6inch monitors, svs pb2000 sub, denon av2000, so glad I did. Woot!", "I had reservations about buying a refurbed system but I am glad I did. I installed it in a afternoon with 16ga wire and the thing is loaded with options ,,,,very professional system !", "I bought this Denon because it is exactly what I was looking for. I use it in our family room, and since I have little kids it does the job very good. Sound quality is better than I expected. I am satisfied with the product.", "I still have some wire to hide (the wife has given me the LOOK, so I know it's time) but other than that I can only again say WOW! I took my girls to the movies yesterday and when we left they both said our home theater set up sounded better!! I can't think of a higher compliment for the Denon receiver/speakers than that.Buy it and enjoy!! We sure are.", "The pathetic single wire FM antenna provided would not work at all for me in a fringe area but I had one of those 'T' configuration antennas from a previous Sony amp and it brought in a couple stations. I'm better off using the internet radio. I get no coloration or distortion with this setup and feel it was the most audio quality for the money I could find on Amazon.", "This product comes with a 3 year warranty and the speakers come with a 1 year warranty I believe. Both companies have great customer service and registering your products is very easy online. This is a "kit" home theater since the speakers are Boston Acoustics (great brand) paired with the Denon Receiver.", "Have had this about 3 weeks now using a Kindle Fire HD, bluray player and internet radio. One bummer is my basic cable won't allow my TV to provide a digital audio signal for patching network TV sound back into the amp. Not an issue if you have a digital TV signal. The speakers are fine with the wire provided if you are in a smaller room. I would not use their wire for the maximum runs of 20 to 40 feet it could provide."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,712
|
Yes, it can via slave...when your flash triggers it will too. It is an amazing flash by the way. I have 3 and love them.
|
{"question": "Can it be triggered off-camera even if a Nikon SG-3IR is attached to the camera?", "document": ["Looks very sturdy! I bought it after reading a lot of great reviews on it and so far I agree with all of them. Very easy and straight forward menu. Very Very easy to use (considering this is my first speedlight). I didnt even have to read the user manual to figure it out. Its definitely fun to use off camera (I use Nikon D5100) and the optical sensor works perfectly to fire it with the camera flash.", "I bought a couple of these to replace my Canon 580EX's since I never use TTL, even when shooting with the flash on-camera. These have fantastically solid build quality, and the built in screw for stand mounting is awesome too. I've used these on-camera for a wedding reception, and off-camera triggered with the optical slave as side lighting with my Elinchrom Quadras. No complaints, only praise.", "This is a great manual flash. It is build like a tank. The manufacturing quality is high. Even the box has funny writings on it. You will immediately see that every item got designers attention. I got few of these and I use them off camera with umbrellas and other light modifiers for family pictures to get a studio look.", "I am new to photography and wanted an affordable, off-the-camera (OTC) capable flash. The LumoPro LP180 is exactly what I was looking for.", "I have used all the Nikon and Canon flashes but I have to say this is the best value for the money. There are so many ways to trigger the thing its amazing. I really like the way it works and its real durable too.", "I shoot in manual mode, so I didn't want to spend a thousand dollars on two Nikon SB-900s. After doing quite a bit of research, I came upon the LumoPro LP-180 and decided, based on the positive reviews, that it would give it a go.This is absolutely the best manual flash unit I have ever touched.", "I felt that compared to its predecessor it was a bit less powerful (i'd say about 0.7EV) and tend to eat the battery pack faster (first time I had to change a pack on a shoot, though it might come from the battery model / age)Overall it is slightly longer the the previous model and they changed the plastic material for another one that feels even sturdier.", "Very impressed with the quality of this flash for the price! Battery life is amazing too! Will be purchasing a second on in the very near future!", "This unit has almost everything except ETTLii. It does everything it is advertised to do. The PC port makes. It the perfect partner for the PocketWizard Plusx and the ability to select the power of the flash is an additional asset when it is used as a slave. When used as a slave there are multiple options to trigger it. This is a win win purchase", "This thing is awesome. If your looking for a great manual flash, this is the way to go. It is by far the easiest flash I have used, and the most reliable."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,729
|
It works fine with my next 5t.
|
{"question": "Is this mic compatible with the nex 5t?", "document": ["I bought an Nex-5 when it first came out and I was forced to buy this mic to achieve better audio quality when shooting videos. It does improve the sound quality vs. the 5's condenser mic, but when I went to upgrade to a new Nex-7 (awesome camera, by the way!) I was disappointed to find that this mic won't work on it.", "I purchased this microphone with the intention that I would have more gain in direct volume while recording, unfortunately The volume seems the same, but I will say that clarity is still better. Although Static noise will still be there and you may have to edit that out with a program, such as Sony Vegas, etc.Price is a little high, but there really isn't much you can do since this is the only compatible mic out there.", "The audio quality isn't great. I'm not sure how much better than the factory mic this is, but oh well.", "I tasted and used in some videos. The device is great because it has a good range for recording voice. The prices pays a good mic.", "), then I can't have the microphone clipped in (because it's physically in the way).Aside from that, it's terrific. So if the flipped LCD isn't something that you need for what you do, this may be the perfect mic for you!", "Good mic for the price. I think it may be the only external audio option for the Sony NEX-5N. Wish a shotgun mic was available.", "Just a horrible idea of attaching a mic. They should have just made it plug in and out so you can quickly change the mic and pop on your flash. Anyway, if u have an NEX camera then this is your only option for better audio. And trust me the audio quality is great.", "just got this in today. I am really shocked at how much his this crappy mic creates. I'm so pissed right now. I don't know if its the the auto gain or if the components are really just that bad, but don't get this. get yourself a external recording solution and just sync it up using FCPX or pluraleyes.", "So I purchased this mic & returned it in about a week.Being owners of the Sony NEX we have a big problem with audio. The On camera stereo mics sound like crap. They aim upwards not forward to what you're shooting. They also pick up the camera's auto focus lens movement.", "I gotta say that its a great quality audio this mic gives you... can't complain on that, but what is bad is the fact that A) you can only use it with the NEX cameras and B) it's the weirdest form of attachment mechanism ive ever seen. Its basically an overcomplicated mic plug."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,736
|
Depends on what you're making, but side dishes (fries or veggies) to feed 4 or main dishes for 2 seems to be the average in my experience.
|
{"question": "food capacity", "document": ["I am excited to work my way through the recipe book that came with it and try out recipes I have since found online. The only thing that would make this review TEN stars is a larger cooking capacity which I pray will sometime be on the way! Can't wait for a reason for gift giving. This one is at the top of my list!! !", "We received this product as a Christmas gift and I was skeptical at first but after the first batch I'm hooked! We use it twice a week for fries, hash browns and sweet potato fries. Can't wait to try some of the recipies in the book. I only wish the unit had a little larger capacity - with a family of 4, there are never any leftovers!", "please go and buy it now!! and enjoy your food!! it is healthy and fast.. i like it much much", "We have used it a few times now and love it. The idea of using so little oil and making the food a little healther is great", "This is a great product. Very easy to use and provides good healthy food. Wish there were more recipes for this product.l", "This is a great product for those who don't want to cook with a lot of fat. You can make all kinds of food in it, not just fries (which are very good, by the way).", "My family approved the Actifry and now we eat fried potates more than we were used to. We are going to test with another kind of food.", "thought there would be more variety of food items that could be cooked in it. A little disappointed for the price I paid.", "This is good for making French fries and not much more. The cooking action macerated everything else. Food needs to have a firm consistency.", "It is easy to use, easy to clean and the food is tasty. Don't forget to take the food out when it is done otherwise the machine will still cook it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,737
|
You connect the device to a computer using an Ethernet cable and temporarily change the computer network settings so that it can interact with the device. Next you change the device settings to match those of your wireless network and then you can disconnect it from the computer and restore the computer network settings. The device retains its settings in its built in memory so it becomes part of your network from that point onwards. This is all documented in the user manual that comes with the device (also available on the iogear website http://www.iogear.com/support/manual/GWU627_Manual.pdf)
|
{"question": "how do enter the security code for the wireless connection", "document": ["I needed this with a wps key to hook my security cameras up to the internet so i can look at them where ever, The wps key allowed me to hook up with no problem. I didnt have a place to enter a password so having the wps key is great. very quick install.", "Installed a security camera system in a garage but needed to be able to login from the computer in the house to monitor the camera system. This unit allowed the hardwire cat5 connection to convert it to a WiFi connection so I did not have to run a long cat5 cable outside underground to the camera controller. Worked very nicely. Easy to configure.", "For example, those worried about security can set-up a password for the device. It's possible to configure this device to work as a gateway, bridged (default), or wireless ISP. You can change the default WAN (outward facing) and LAN (inward facing) options.", "I use WPA2 and I had my router set to WPA2-PSK only, which is the root of the problem. If you cant connect with the IOGEAR with WPA2, go to your Wireless tab, then Security and where it has the menu for the encryption type, change it from \"WPA2-PSK only\" to \"WPA2-PSK mixed\".", "Couldn't get WPS to handshake with my router. Plugged the IoGear up to PC, and setup was easy enough. But . . . instead of configuring the IoGear, somehow, it RECONFIGURED THE ROUTER instead. So, the good news was, my BluRay player is now online, but my two security cameras, laptop, and iPad aren't. The SSID was changed to some 20+ random chars, and the password changed. If you're only hooking up ONE wireless thing, or just plain have better luck . . .", "I bought this WiFi adapter in order to connect to my Samsung LCD TV. I was worried about configuring the WiFi adapter to my Access Point's security configuration and about its ability to connect to the TV's Ethernet connector and connect to the WiFi network.Everything worked smoothly. I initially connected the IOGEAR adapter to my home PC in order to configure its wireless network security. I didn't use WPS, but rather configured the WEP Key as described in the installation guide. In 2 minutes I had it up and running.", "I was using this for my 8 camera security system, so it was probably too much for this little adapter because I did not have smooth streaming of my cameras.", "Device provides a good reach and is simple to configure.I highly recommend to all interested in having a wireless connection to remote devices.", "This product came new, and was simple to connect to my HD DVR with Directv. Just one button connection to my wireless modem via WPS, and my Directv Receiver was ready for those downloads.", "Highly recommended. Good value and easy to setup with a laptop or right from your desktop. After setup, take it to the intended location and viola! You are "wired" through a wireless connection."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 139,750
|
Works great
|
{"question": "Does it work for gaming such as Ps3 & Ps4?", "document": ["Did not work with Sony PS4. Could not get audio to work.", "does nothing - does not work , it was useless in purchasing this item , will not believe anything from this carrier", "Works as expected. Used for ps4 on an older tv", "id clearly recommend this if you dont have a hdtv works with the ps4 have yet to try it with my laptop but i will try that when i get a chance", "Ordered this for my son he needed it to hook up a ps4 to an older tv the video worked but the audio would not.never know with mixed reviews.", "great product recommend it to ppl who do not have a HDTV. Works perfect :D hope you like it as well if you buy this product.", "excellent product, highly recommended.Works great with the PS4", "Worked perfectly for my Roku 3 and older TV set. Needed to convert an HDMI input to TV AVI output.", "Worked for about a week and quit. I ordered another and hope it lasts longer.", "This little box provides the connection from your HDMI output device to your PC using a USB 2861 device (ADESSO AV-200) for recording audio and video. The aspect ration will be 4:3 but I am able to stretch 16:9 video (that was squashed horizontally) back to 16:9 with my PowerDirector software. I have not seen any other HDMI to RCA connector hardware in the market place."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,756
|
I've used them multiple times with the Nikon D600, D700, & D7000 with both SB-800 and SB-910 and they have always worked fine.
|
{"question": "They work correctly in a Nikon d-600 ?", "document": ["While the units have worked great on my Nikon speedlites, a big surprise was the ability to get high speed sync on my studio strobes. The sync works all the way to 1/8000 giving me the ability to work with an F 1.4 and the resulting shallow depth of field. I couldn't be happier.", "The Pixel King seems to work much better with Canon products than Nikon. Canon's e-ttl system is simpler than Nikon's i-ttl system, yet ultimately it is more useful for radio wireless remote control of an off camera flash. Nikon's CLS is more versitile, but versility makes it more complex. Complex means expensive, especially when designing wireless control systems and especially when you are trying to adapt an optically based wireless system to use radio based signals. I think Pixel pulls it off very well with the King.", "I would give this 2 1/2 stars if possible. The reason for the less than stellar review was that one of the receivers in my order didn't work right. The good receiver would operate in full TTL mode, which was a major selling point for wanting this system. It's hard to find a good TTL set of triggers, let alone ones at the point.The problem was with the trigger that didn't recognize my flash correctly. The one trigger that did work as promised worked pretty well.", "Well they work how they say they do. I have only used them a few times to test out the features and they work great. I was going to go with the flex tt's from pocket wizard but for $200 I got the same features I wanted. I really wanted them for the high speed sync and it works great as well as the TTL There easy to set up with just a glance through the manual. I use them with an sb800 and sb600.", "This product works well inside and out. I use the Nikon digital single lens reflex system with three speedlights often for wedding and portrait photography.", "I rely heavily on my Nikon AF assist in the dark of the night during receptions - and the AF was very reliable. Now that my camera thinks I am using i-ttl flash, the AF assist within my Nikon bodies do not function when the Pixel King transmitter is on my bodies. This wouldn't be an issue of the PK lamp was useful, but it is WAY too weak.", "Using this on my Nikon D7000 with SB700, and 2 SB600's on the receivers. So far, so good. They are light weight and the set up was a breeze (I literally clicked \"on\" and they all worked). I'm glad I didn't splurge on the PocketWizards when this is exactly what I needed (and I can't afford them after my $2K lens I just bought!). Thanks Pixel!", "So I bought these because my friend with a cannon said they worked great. Ordered came fast and was easy to put together. Works great in ttl mode and there is plenty of adj using the exposure comp. in camera. What you cant do is use manuel for flash setting and control from the camera. Cannon has this feature but nikon does not. If you want to shoot manuel flash instead of ttl with these u will have to change you flash setting by hand on the flash.", "I've only noticed flash inconsistency when using light modifiers such as snoots on my SB-600 or 800.- the transmitter and receivers look too similar - they need to change something on the transmitter to make it stand out from the receivers.- the bracket on the receivers need to be metal, just like the transmitter (the receiver feet, where they would connect to a flash bracket or the like). I had a light stand fall about 10 feet, and although the receiver still functions, the foot cracked.", "We use this with out Nilon D500, SB 700 flash and some studio lighting. Triggering is reliable and fast. I think we have only had one no-fire so dar and that was in the field and perhaps subject to interferance. Retried and it worked fine."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,817
|
No. The doors, drawer front and sides, top, and exterior frame are solid wood. The side and back panels are veneer-covered particle board. The shelf, drawer bottom, and cabinet bottom are plywood. It is the coffee station at our office waiting room and has held up well after 9 months of use.
|
{"question": "Is this 100% solid wood and no composite used?", "document": ["some veneer on sides and back but good solid wood elsewhere. Drawer is very useful. Finish the top with mineral oil for protection. careful with the screws - you may mix them up when putting this together. Have a few extra short flat head screws around in case.", "I'm glad I bought this. it looks good and is a sturdy cart except for the handle at the side. just screwed in from the back with 2 wood screws. first time I grabbed it, it loosened up. I re-enforced it with long screws and a backer block. should be ok. all natural wood, no plastic or chip board.", "I am very pleased with this kitchen cart. For the price, it's made of sturdy, real wood and when assemble is quite handsome. The assembly was a little tricky, but I'm not the handiest person and I still managed to put it together, it just took far longer than I would have liked. But it has been great and was exactly what I needed to add extra counter and storage space to my kitchen.", "The wheels are great too since it makes it easy to clean under and move around as needed.One note about assembly; even following the instructions, I could not get the front of the drawer to stay on tightly- the bolts they give you don't lock well and every time I would pull the drawer open it would start to get loose. It was annoying, but I fixed it with some wood glue and it has been no trouble at all.", "The only screws that cried out were those used to assemble the spice rack, dipped them in butter and they went in quietly.Overall a pretty good product,it has little more veneer covered particle board than I expected but a pretty nice piece and it does what I wanted it to do, hold the little Via Venezia espresso machine & Breville smart grinder with just enough room to make a milk based drink.", "We only had one problem in assembly. One of the drawer guides was incomplete. One call to the company and we had the part in a couple of days. Looks really great, especially with a coating of mineral oil.", "Very nice but the pull out drawer doesn't line up perfect (I'm picky) and the shelves could be a little more sturdy.Have patience when putting this together..It was better then what i had for the microwave and worth the $159 I paid..", "This cart looks terrific, was easy to assemble, and is much more functional than the one we were replacing. Super!", "The finish on the door jamb is not smooth as expected. In fact, it looks like it was scraped on something. Otherwise, the cabinet, though smaller on the inside than expected, is fine.", "The cart was deliver undamaged, which is always a good start. Assembly instructions were very good with a couple of minor exceptions and the cart went together without a hitch. It seems like it always takes me a little longer than the times others experience but it was not a big thing. The cart is well finished, and the final product looks GREAT ! Well done Catskill ! !"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,830
|
It has a long range. I can get 200-250 ft from the phone before it disconnects
|
{"question": "How far can you walk away from your phone before it disconnects or looses a signal?", "document": ["OK item, this was my second as I lost the first one. Paid full price for the first one wish I ahd just bit the bullet and done that again! This one will not stay connected to my HTC EVO. Drops signal when more than 4 ft away from phone.otherwise when it works it works well.Streame audio great and battery life is super just have conection issues with it. Also Motospeak is AWSOME!", "I was looking for an new earbud and this one works well.Sound quality seems good on both sides (my end, folks I'm talking with). There are a few times where I have had some choppiness, this seems to related to the phone being too far away from the earbud.Although playing music through the earbud is not a high fidelity experience, it is a nice way to listen to podcast without other earphones.", "The Voyager just tells the battery condition. *You can have 2 different phones connected to this head set. So can the VoyagerThings I really dislike about the Command One:*Battery life is ok, 6 hours max with above average use. I can go all day with heavy use on the Voyager 12-14 hours. *Noise canceling compared to my old Voyager is not even close, the Voyager blows the Command One away, way far away!", "Works very well. The headset can be further away from phone than my previous Bluetooth. Comfortable in the ear. Great headset!", "Prior to ordering this Bluetooth I had one just like it for about 4-5 years. I can't talk on the phone without using my Bluetooth. It completely takes away the background noise from you and the other person. No wind, no loud noises nothing only the person that your are talking to. I absolutely love this device.", "Buy it brand new so you can get all the ear fittings that come with it, and pick which fit is right for you. It connects with my phone pretty quick, as long as I turn the phone on first. The sound is crystal clear, but compared to blueant it does have a lot of treble but you can get used to it. It does sometimes crackle & pop when you move away from the phone, but it's not a big deal for me.", "If you're looking to use it as a dedicated audio device or walk around your home holding a conversation while your phone is stationary, you might want to look elsewhere.", "Some of this may have been my location and signal strength, and at best is anecdotal, since I have not asked very many people their opinion of how I sounded. I bought it for use with a Sprint Galaxy Note II, since I did not want to be lugging a huge phone by my ear. The interaction with google voice had some issues and I had to turn off a feature in google voice in order to use the verbal \"answer\" command to answer the phone.", "I've gone through at least a half-dozen bluetooth headsets including the highly rated Jawbone and junked them all after a few weeks. This unit is perfect in every way. A nice assuring female voice tells you the headset is connected and then reads its battery level. And, my iPhone displays battery level. You voice command to answer the phone, no fuss or muss! At last people tell me they can hear me clearly. I've never had a dropped signal. Great headset, kudos to Motorola!", "when it was delivered the earhook was broken , that turns out to be the best thing about it so far . I connected it to a Galaxy 3 samsung . It worked a little , by that I mean if you are looking at the phone you can answer it , usually . If not you won't hear the call most of the time ."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 139,906
|
Yes it does when select saute
|
{"question": "Does it brown?", "document": ["Latest 3rd Generation Technology, Stainless Steel Cooking Pot and ExteriorThe highlight of this pot is that you do not have to pre-soak before making brown rice.Love that it is quiet when cooking.", "The highlight of this pot is that you do not have to pre-soak before making brown rice.Love that it is quiet when cooking.Cooks meat fast.Watch out that when you track cooking time, in addition to the time shown on the pot, you also need to add time it takes to bring the pot to pressure, and the time you let it cool down before you can open it.", "It's as beautiful as the picture displays. It comes up to pressure in about 15 minutes. It is a solid piece of equipment: The stainless steel insert is heavy duty, with a thick bottom that I'm sure would be fine to brown on the stovetop. The liner is a thick, sturdy black ceramic. The plastic parts are solid. The lid is not hinged, meaning that you can clean it in the sink rather than wiping it down.", "With the Instant Pot you will have to brown your food on the stove top in another pan and then move it to the cooker. I tried browning in the liner on the stove. This did not work at all well. This browning feature on the Elite also makes it so much easier to thicken foods at the end of the cooking cycle by simply pressing the start button. You will get a nice heat up to make a gravy or just thicken a soup or stew.", "Not only is it a programmable pressure cooker, but it has a stainless steel inner pot. SCORE!!!!!! My first cooking adventure involved making brown rice. It turned out perfectly and in less than half the time it normally takes me to cook brown rice. The only tip I learned was adding a little spray of olive oil to the water and brown rice mixture. I set it on the \"rice\" setting and off to the grocery store I went. It was so easy.", "I've been using it about a month. It does everything I ask of it. Quick pressure cooking -- and no burned beans like on the stovetop. Making rice requires a bit of learning the right amount of water for brown, long, sticky, etc -- once you get the proportions, the rice is great. Soups, stews with meat, lentils: does it all. Seems well built. Easy to clean. Controls are straightforward once you read the manual. And the food touches only stainless steel!", "This is one of the best stainless steel inner pot pressure cooker. Had miracle stainless steel rice cooker ippojbefore, most of the rice used to stick to the pot but with this cooker, not a single grain sticks to the pot. Read a comment above, saying that we can't brown or sauté anything in this cooker but u can. You have to use the manual mode. But the only problem is u need to close the lid n open up every now n then to stir in the contents.", "I like that the Elite stays attached until I wish to remove it, so I can open and close it repeatedly for multiple servings. Be careful of the escaping steam. The program buttons are comparable to the Elite. The Instant Pot has a slow cooker button. Both lack greatly in what they call a recipe book. So lacking in fact, that it leaves me searching online for recipes to try. Now, the biggest drawback in my opinion is that the Instant Pot lacks the ability to brown in the cooker.", "It would be very convenient if I could simply put the inner pot on the stove top to brown/saute onions or garlic, etc, first before adding the remaining ingredients to pressure cook. It looks like it may be possible, but since it is a rather expensive appliance, I am hesitant to try. Anyway, since I do not have time for two processes, I usually simply forgo the browning process and throw everything in at once and only pressure cook it all.", "It is good for stew, congee like food, but it would cook faster due to its pressure.BTW, I have a regular pressure cooker but I seldom use it as it is a little complex to use and it requires some attention. Now this cooker combine the ease of electronic cooker and function of pressure cooker, rice cooker, slow cooker together. I highly recommend it!Update on 2/28I tried brown rice. It handles brown rice very well."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 139,908
|
Petet,I don't think so, but it wouldn't matter if it would fit a Mason jar or not, it would still LEAK. The weak link of the entire system is the TOP.
|
{"question": "Will the top fit on a standard Mason jar?", "document": ["The lid does not fit the jar top. Also, I received no return slip so I am not returning it for the refund. Not worth the effort or the added exxpense of postage.", "Nice syrup dispenser that's large enough for the whole table to share. The top part is all metal and there's a soft rubber gasket to provide a tight fit with the glass container. Drips of syrup tend run down from the spout after use, but I'm not sure how you'd prevent that.", "So now I can bring the honey in one jar and the maple syrup in the other jar.The major trick to these is to hand tighten the lid down to a firm fit without over cranking. And the second trick to prevent dripping down the side of it, is to cut the pouring with the lever before you raise back up vertically. If you cut the pour with the lever it wont get on the side of the jar.", "works well. thin metal dispenser on top of glass bulb. easy to clean. I like the option of serving cold or hot syrups in this jar.", "This is a good quality syrup dispenser which I have found is surprisingly hard to find. It has metal top (those I've had from big box stores were plastic and broke quickly), rubber o-ring and large capacity glass jar. So far it has worked well except the rubber o-ring can be somewhat difficult to allign and the top hard to unscrew of you screw it down too tightly.", "I've spent lots of time looking for an inexpensive honey dispenser. This jar works great! No leaks and no problems with pouring.", "Syrup leaks between the jar and lid. Tried flipping the rubber seal both directions and still leaks. WIsh I could return it.", "These dispensers are just like granny used to have. Work well as long as they are not over tightened. Remember to release the lever before tilting jar back to upright position.", "I make my own pancake syrup and love that I can pour the hot syrup straight into the glass jar without worrying about melting it or releasing dangerous chemicals into my food!", "I was very pleased with my order experience. The jar arrived way before I expected it. We use it to dispense Cane Syrup and have enjoy using it. I would recommend it to anyone that enjoys eating syrup, honey or any such type liquid."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,910
|
Yes, I washed it in the machine on delicate cycle and air dried it.
|
{"question": "Is it machine washable?", "document": ["I bought this shower curtain 2 and a half years ago and it still looks as good as the day I got it. I know the lack of metal grommets has been a concern for some, but the buttonholes have held up just fine. The curtain does have some sharp creases coming out of the package. I was too lazy to stick it in the dryer, but the creases fell out on their own in due course, and I love that it's machine washable.", "this is beyond elegant looking! u need to get the see-through-clear liner if u have beautiful tile from shower you want to expose. very delicate, classy and quite different than any curtain i've seen! just gutted house and it is stunning in bathroom!", "this is a good looking shower curtain for a good price. i have a white curtain inside my shower and they both look good together", "loved this shower curtain--but had to returned because the color was not quite right for the bathroom. the ribbon strip is quite a rusty brown.", "love this shower curtain! colors are soft - since it is a sheer. cordinating colors are a soft green not pastel, golds brown and soft copper - many of which you can find at a super store right now.", "i love this shower curtain, i love the way it looks in my bathroom and i love the material and how it matches with all the other products i bought.", "i love the shower curtain, but keep in mind that it's see through. do not purchase the shower lining with designs because it won't look good. solid colors are the best. it looks great with the new bamboo mat i purchased from amazon. thanks", "has a slight shimmer, very lightweight, exactly how it looks, very pleased with this purchase, matched the hand-rubbed bronze fixtures in the bathroom", "a lot flimsier than i thought it would be. Doesn't hang evenly either - it's such light material that it appears to be crooked when you hang it up. redoing my bathroom this weekend so it's good enough for now but definitely won't make the cut in the new bathroom....", "[[ASIN:B002H9X6QW InterDesign Textile Shower Curtain, This product took longer to search for than it took to arrive, the choice these days being screens or curtains with bubbles or fish. The curtain is well made and the eyelet holes fitted over my plain shower curtain exactly, amazing really, considering they were manufactured years apart and from the opposite side of the planet, well maybe not, who knows these days."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 139,918
|
Not sure if you can use "any" braided cable, but if you use "easy heat cable" you must strip back the braid exposing the black inter sheath cut this off square and insert approx. 3/4 in into the 10802 connector close it down and tighten the screws. what this does is there is two sharp metal barbs inside this connector that puncture the black sheath and makes the electrical connection
|
{"question": "Will this work with any braided heat cable? How does the cable attach to this?", "document": ["wanted this to control a heat pad not heat cable. Switch did not seem to have a solid on/off action. Sent it back.", "Easily connects the heat cable to a power source. Dead simple to install. It works, and works well.", "This product was returned to Amazon because I was unable to use the Easy Heat Cable the product was intended to be used with. The Electronic water valves I was trying to protect from freezing could not be protected with Heat Cable, but had to be protected with the correct ambient temperature.", "The Easy Heat system seems to be well made. The 3' cord is too short for many applications (including mine.) Since it's 90 degrees in the shade now I can't say how well the Easy Heat system will work. One thing you should be aware of is that this item in NOT A THERMOSTAT. You will need to buy a separate thermostat (and also a spool of heat wire) to make a complete system.", "This is the adapter used with freeze free cable. Follow instructions for correct mounting. Works well. A red LED shows it is powered up.", "This is completely obnoxious. You need a different piece to make it work. It doesn't do what it's supposed to do on its own. Sure, if you know about home repair you might have figured this out on your own but for someone like me, it does not do what it says it's going to do. It should state clearly that it requires an additional purchase. A total waste and very frustrating.", "I thought the product was complete with heat tape and all. Since I did not use the product, I can't rate it's quality.", "This product works great. I would recommend it to anyone who is in need of making there own heat tapes. I did not find any flaws with this product.", "This connector kit is solid built, and built to last! It is so easy to install your heat tape to,any child could do it, it is fool proof! The cord is extra heavy duty almost over kill and the body of the unit is not some flimsy cheap fall apart piece of junk you normally find associated with some store bought already attached thermostat controlled heat tapes. You will like this Easy Heat system over anything else on the market, period!", "Very easy to use and this newer version has a light that tells you its fuse is OK. Its not a thermostat, Easy heat and others sells several in line thermostats that are preset to a given temperature (but I like the adjustable ones you can get else ware). I set up my heat tape with a power monitor that tells me how much current it is pulling. Its nice to know the thermostats turned on and all is working properly from inside the house when its near zero and windy outside."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 139,933
|
There is no warranty. mine stopped working after 2 months. Seller refused to replace. Lesson learned. Always buy with warranty.
|
{"question": "What is the warranty?", "document": ["8GB [2x4GB] Fully-Buffered FBDIMM Memory RAM Upgrade for the Dell PowerEdge...Generic no Warranty -HOWEVER THE ONES I GOT DO HAVE LIFE-TIME WARRANTY STICKER ON THEM-WORKING.", "Using in a Dell PowerEdge 2950, one can never have enough RAM! These worked perfectly and were super cheap at the time (older RAM usually gets more expensive but these were perfectly cheap at the time :).Still working great some months later.", "Use these to upgrade the server to 48GB (4x12). No problem so far. Server running Windows 2012 R2 Standard Edition.", "This pair is my second purchase from the same seller which has been installed on a Dell PE2950. My previous order had HP labels on all the DIMM modules but they fit Dell PE 2950 and 1950.", "This added a couple of years life to 3 old workstations by doubling the RAM. Note the it is buffered RAM for workstations and servers.", "Popped into my Dell 2950 server and now I have 16GB. A must have for servers looking to upgrade as Win server 2003 looses support. Breathed new life into an old work horse. :-)", "Plugged the DIMMs into the machine to upgrade to max supported for a VMware ESXi server. All worked without a hitch. Couple weeks later with active VMs running on the machine, and no issues. Would definitely recommend if you need more memory for a Dell 1900 series machine.", "Much lower price that any other source - so I took a shot with it and so far no problems - the server loves it.", "I have installed the ram on my PE2950 and the box detected them without any issues.It has been running nonstop without any issues.I will definitely buy some more soon to max the ram on my PE2950.", "I had to update my Ram in my Dell 2900 and this was new RAM and worked excellent. Will buy from again"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,954
|
Each basket stands about 12 inches tall.I hope that helps.
|
{"question": "Was wondering how tall these are when stacked, just want to know if they'll fit in my freezer.thanks", "document": ["This is the solution I've been looking for for years!...The back of our hallway always looked so messy with those big recycling bins provided by the town. These are small enough to fit into a cupboard, stacked just like in the photo. And not too heavy to carry to the dumpster. Thanks to the genius who invented these!", "Perfect fit for our freezer. We buy a 4-H steer at the fair each year. Which we share with our grown children living on their own.It was difficult finding what you wanted in the past, but this year is much easier since we divided it up in categories in the bins. Thanks amazon.", "In my case, I estimated the dimensions of recycling by type I had in a week as my judgement for these being good for me. The size and design seems perfect for carrying recycling to dumpsters or larger bins by hand. If you're in an area where you drive your recycling to a center, these might be smaller than what you'd want. The quality of the bins seems good, especially for the price. Depending on the handle position, the bins can either be nested or stacked.", "These bins fit in our new chest freezer and are the answer to neat, organized storage. I actually can see what I have in there!", "Bought a small chest freezer. These fit in perfectly. No rummaging for items. Stacks in to layers and handles make it easy to lift out.", "The delivery is very fast. The bins fit nicely in the 7 cubic feet GE freezer we bought recently. Would definitely recommend the product!", "I love these stackable recycling bins. Using them to organize my chest freezer. Three of them fit very nicely. Using the fourth one for recycling. Very quick delivery.", "These are perfect for chest freezer organization. Easy to handle because of the handle! Eight of these will fit nicely in one layer of my big freezer. These are stackable, also. I intend to order more! !", "I bought these not to use for recycling but instead to help organize a 7 cubic foot chest freezer. I can fit all four in the freezer where they stack nicely from top to bottom of the freezer space. The handles make retrieval of frozen foods a snap. Great product!", "I recently received a chest freezer as a gift. I love the freezer but it came with no baskets which meant I was constantly digging through the freezer looking for something. I purchased four of the bins to hold and keep the vegetable, already prepared meals, meats, etc. separate. And with the handles it is very easy to lift the bins in and out of the freezer. These bins fit the freezer almost as if made for it but they were not made for freezer storage."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,962
|
Less than 1.5 inches, slightly over 1.25 inches.
|
{"question": "What is the overall thickness of the unit?", "document": ["But it is not a issue for me becuase i simply taped it to the wall. Overall I am happy with the product.", "This is a great product because it is both a surge protector and 6 way swivel unit all in one.", "The unit is exactly as advertised. I don't know what else to say about a plugin! So that is my review,", "The unit works, but as another reviewer said, the top of it sticks out from the outlet by about a half inch or so because of its weight.", "This unit is being used for aTV, sound bar, Blueray player, and a light. Being it swivels maes it very each to plug everything in.", "This unit is well made and feels like a quality piece of equipment. Works fine. I am glad I bought it.", "Received the unit and while going to install it the plastic prong broke on the back...this should be improved upon. Outside of that, very pleased with the unit and will purchase again.", "I would recommed this unit to anyone looking for surge protection for their devices as for the same price you are getting the added flexibility of the swivel outlets.", "I like the swivel mount of the outlets so that the plugs don't stick far out from the wall outlet. Unit stays in outlet just fine. Seems like a winner to me.", "I had no problems whatsoever! **** Update 2 ****We lost power due to Hurricane Sandy and no issues with the unit or the equipment plugged into it! (see my comment below for details)"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 139,980
|
Yes you should have no problems. It will connect to anything that has a left and right audio input. And anything with a single output such as a head phone jack.
|
{"question": "Hi. Can I use this to connect my HDTV to an analog audio receiver?", "document": ["Use this on our receiver to plug in iPhones or what ever you might want. Works great and no issues.", "I've been using the cables since I got them. I use them to connect my I-phone to my old stereo system: great combination between new and old technology. Love it!Recommend highly.", "This cord appears to have the highest quality. I am quite satisfied with the materials and the workmanship and finish. But I'm not an audiophile and I am wondering if the use of the cable is appropriate for what I wanted to do with it.I bought this to connect my iPod to my Denon 4800 Amplifier. It works well enough, but the sound level that I get from the cranked up iPod is less than that which I get from a comparable CD.", "Product works great! I use to connect the RCA cables in my car to my Android smartphone. The RCA cable connection is by the cigarette lighter in the back of my Infiniti. My 7 year old goes across the back of the car when coming in and out which caused the old wires to fray.Installed the new ones from Mediabridge and even my 7 year old could they were of a higher quality than the Radio Shack style cable. Sounds great, looks like it is going to last.", "I have an H25 receiver in my garage running out to a projector in the back yard. Now I can control my receiver without having to go back in the garage every time. It makes it through thick insulated exterior walls without any trouble. This is a great addition if you already have the compatible remote. The remote is also available on Amazon for a reasonable price.", "Quit working almost immediately. Ends are way too small for terminals on receiver.", "I have been through two different types of connectors through different sellers; both of which did not work. this was easy to connect and works like it should as well as looks very professional.", "Since I teach yoga classes, I needed to be able to connect my iPad to a control panel at the studio that I teach.This cable is very well made and has not fallen apart like some of cables that my fellow teachers have purchased.I would recommend it for it's performance as well as it's durability.", "But in the end, I am able to use it and the sound is satisfactory. If somone can explain why the sound is less that that of a CD I would appreciate.", "I bought several cables so I would have one where I use my device an not need to carry one with me.these cables are good quality an deliver what I expect."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 139,996
|
It can hold about 12 cups of water but for mixing, only 6 cups.
|
{"question": "What size is the bowl?", "document": ["I needed the small size and weight, so it's uniquely useful to me.Pros--LOVE being able to rummage around in the batter and stir stuff, unlike with the Kitchenaids (that DON'T get everything mixed)--Steel bowl is nice shape for working--Love Breville's plugs with the hole for unplugging.--Small enough to work in my little RV. Light enough to move about from storage.", "Had plenty of power for mixing cookie dough, blades easily unsnapped for cleaning (licking), and smaller mixer size was a plus in my tiny kitchen.", "I have used this several times and I love that the bowl has its own motor. Mixes great. There is plenty of room in the bowl, but it is smaller than I thought it might be. I would buy this again, especially for the price.", "It has done everything we have tried very well. The controls are simple to use and understand. The beaters and bowl are easy to clean as well. Yes, you don't have all the attachments available like the expensive models, but look at your usage. Do you need all that?This is a good buy.", "Nice sturdy mixer combo. Everything has a quality appropriate to the price range. No glaring faults except perhaps the noisy bowl rotate motor. It is LOUD. The mixer it's self is quiet and powerful. The boost button cleans clogged beaters without fuss or slinging batter everywhere.", "Looks very nice and work great. Easy to use Easy to clean love that it detaches from the base to become a hand mixer. I also love the turning mixing bowl. The only beef I have with it is that I paid $16 more than what is being advertised now. Still worth it. If you need a reasonable mixer grab this.", "Mixer has excellent power and good mixing capability. Offset of blades in mixer bowl makes for less having to scrape sides.. Does good job of scrapping bottom. A little noisey on the metal bowl, so I gave it one star less. Hight recommend for everyday mixinng uses.", "What happens if the bowl turner dies? Sure, it can be used as a $25 hand mixer, but it's heavy in that capacity.--Too many tiny parts on the beaters. They are very difficult to get clean--Top buttons that run the beaters are not easy to operate. Takes two pushes to start the beaters. One is the on-off slider, and then you have to keep hitting the + or - button to increase or decrease speed.", "I do a fair amount of cooking using this and I LOVE that it separates to be a handheld mixer as well as stand mixer. The lock in bowl is wonderful too as other stand beaters I've had in the past did not offer this feature. It works great, only thing lacking is a mixing paddle, but a hand scraper and the beaters and dough hooks included all work perfectly. the choice of various speeds with the boost is a good feature as well. I definitely recommend this appliance.", "Works great, but it is noisy. Makes great breads, cookies, frosting and cakes. My daughter loves it. I would recommend."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,021
|
You are correct that it can be almost impossible to get the caps on. First of all, the caps are hard to get on just by their nature. BUT, if the cap is even slightly not perfectly positioned squarely over the bottle mouth, the cap will be VERY hard to get on. I have found that situating the cap slightly more toward the opposite side of the metal latch makes it perfectly seating when it is brought down allowing for a somewhat easy sealing of the bottle.
|
{"question": "I am having a hard time getting the bottles to close? Any tricks? Are they defective?", "document": ["There are great bottles. I got them in a timely manner, really easy to open and close. I will likely buy some more.", "I ordered a dozen and one came broken -- not the seller's fault as it was packed well...I think the shipper just tossed it around. 4 Stars for the one broken bottle and the bottles caps are bit tight/hard to use, but you get used to it. Good value for price.", "Nothing's perfect but these bottles seem well made and priced right (with shipping I paid just under $3 each.) The \"EZ Cap\" is a little hard to seal and unseal. The trick to unsealing is to place two hands on top of the bottle with both thumbs just under the mouth and index fingers behind the lower portion of the frame at the hinges and pull back with them.", "They are perfect. The only problem was a mistake I made in getting blue instead of amber. I need to see the contents and the blue makes it very difficult.", "I needed secure bottling for brewing my water kefir and these are just perfect. They are also fun to open and close. That is, after you connect the cap unit. That part isn't as much fun.", "These bottles and caps are really nice however it took half an hour to figure out how to attach the caps so they would close properly. Maybe a diagram or instructions would help!", "I purchased these swing-top bottles so I could bottle home brewed hard cider, beer, and mead. I didn't want to save beer bottles and buy a bottle-capper and caps. With these bottles, the stoppers are re-usable (and replaceable if the seal starts to go).All of the bottles arrived from Midwestern Supply intact. You have to install the swing-tops yourself.", "The bottles in the picture were not the ones I received. The ones I was shippped were plain. I contacted the company and they offered to give me a partial credit. When I asked how much and if these bottles were even available to purchase I got no response. I still am trying to get the credit and am getting no response back. I would not reccomend this company to do business with.", "Beer and cider always taste better out of glass to me - WOW, love this old fashion look and I absolutely love that POP sound when you pop the top of a fresh homemade brew. I will be ordering more soon, as I'm getting addicted to this home brewing thing. Been using plastic bottles, but now I want more glass, the taste is worth the investment!", "Good quality bottles. Tops are not hard to put together and it's quite easy once you get the first couple done. Seal is great as well."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,025
|
Yes, the clothes come out softer but I could use only once because the second time it didn't work at all. The heating that has in the bottom didn't work!
|
{"question": "Do clothes come out softer than just hang drying", "document": ["The clothes come out dry and free of wrinkles - remember to do as another reviewer mentioned and give the clothes a good hard shake before you hang them in this, and you won't have wrinkles.My husband's shirts were softer after being dried in this than when we hung just hung them up to dry or when we would use a fan.", "If you are just doing a small load it would be just better to hang dry your clothes. If you try to dry jeans, use a metal hanger. (plastic hanger will become deformed due to the weight and heat) Jeans and towels take forever to dry. Socks and t-shirts don't take that long, it all just depends on how thick the material is. The clothes come off stiff, kinda like they do when you hang dry.", "I love this machine. It works wonderfully with my washer, the Haier HLP23E. However, this washer has an excellent spin cycle and on the low setting the clothes come out nearly dry. I did not find it to markedly heat my apartment as others have mentioned. It also didn't appear to really unwrinkle my clothes.From a noise perspective, it is what you'd expect in the way of a machine that blows hot air. Not too loud, not too soft.", "As other reviewers have pointed out, you have to use this correctly. Don't overload (overfill) it and it will get your clothes dry in a shorter time than just letting them hang out to air dry. Take a little bit of time to hang items so that there's as much space between them as possible, to allow the heated air to circulate around and between the items.", "The center pole is in segments and easily goes together with the umbrella style upper pole to hang the clothes on. The dryer cover is heavy nylon with a heavy duty full length zipper. This makes for an easy setup as well as compact storage.This setup would work well for dorm rooms, small apts, as well as RVS.", "this dryer is quite unique. it looks like a punching bag! however it works good there is 6 arms to hang multiple hangers on.. zip it closed and turn it on,and it dries your clothes. now i have to run mine for about 3 to 3.5 hours to get the clothes fully dry but i am a large person with thick heavy 3xxx size clothes. but it is efficient and dries good.", "Not sure who fell asleep in quality control when they made my item, but the one I got should not have passed thread inspection.As some have stated, it works if you use it right. The clothes cannot be sopping wet. If you have a spin dryer then this may be a good addition. I can see how trying to hand wring a lot of the water out of it before you hang the items up may not be enough to have this dry items in a reasonable time.", "Sadly, the clothes are still damp after all that time (keep in mind I hang them to air dry at least two hours before putting them in the dryer and they are \"damp\" when I take them out of the washer that has a spin cycle) which makes no sense because when you open the zipped portion to check on the clothes it's pretty hot. I even tried closing off the venting holes and leaving one open still no change.", "The outer bag needs to be resting directly against the heated base to work and inflate correctly.Another issue I am still dealing with are the arms. It opens up inside like an umbrella. The only problem is if you do that, the bottom supports tend to get in the way of hangers and clothes don't always hang right. Not sure why it was designed that way, but the umbrella part would make sense if it were on top and you could have an unobstructed place to hang your garments.", "also i reccomend a retractable clothes line to hang dry things inside your home. and dont worry abut things being stiff!i have the haier portable washer!! no more skanky dirty kids screaming at laundry mats! yaaa! when you wash clothes at home and dry them on a line, use a DOWNY BALL WITH ULTRA DOWNY. give the clothes a good shake then hang them over the line. this eliminates that \"stiff\" feel of line dried clothes... i recommend this dryer and a retractable clothes line"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,029
|
According to the description: "Safe to use in refrigerator, freezer, microwave, and dishwasher." I do not microwave in mine, however. As far as staining, I use white vinegar, peroxide, or even bleach to get out stains if the containers need it.
|
{"question": "Do these containers stain from storing tomato-based foods? What about staining when microwaving?", "document": ["Got rid of about 50 old mis-matched containers and replaced with several sets of these Easy-Find containers!Other poster has a great idea... cooking spray before filling with tomato based foods! WORKS!Love these lids and containers!", "I purchased this for my daughter. She was very impressed with it stating that it worked for so many things and the Easy Find Lid wouldn't be warping with it being stored so secure. Storing containers and lids can take up much needed room in a cupboard. These not only nest well but always have their lids with them.", "The are considered "Food Storage Containers" BUT they are the perfect size (approximately 16-1/2 by 11-1/2 by 3-1/2 inches) for storing small items on a rack by the over cab bed in our camper. The lid helps keep items from getting dusty, organized and have never had one fall off the low sided rack. We use them for small clothing items, wash cloths, etc.", "I really like this entire series of storage containers. The concept of using one lid for a number of bottoms and having lids click into a stack that will clip to the bottom of the containers makes storage much easier. They also are excellent freezer containers so long as they are not dropped on a concrete floor while taking tham from the freezer 😞. This particular size is fairly large but is excellent for storing large batches of cookies Good lroduct line and well worth the money.", "Exactly as described and is high quality material from Rubbermaid. Works great for all kinds of foods that need to be stored.", "The easy find lid is a convenience. The container is sturdy, doesn't seem to stain easily, and rocks my world.", "If you have a large family, it would also work nicely for storing leftovers.", "The lid stays on air tight, good for storing fishing line and other things. It is easy to see through, water tight seal.", "This container works out great for storing the peppermint bark I make at Christmas. I have no doubt that I will use it all year long!", "This works great for storing cookies, muffins, etc but it is large. If you plan on using this in your refrigerator, make sure it will fit on your shelves. Use it for lots of things."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,035
|
If you make your cd corrrctly
|
{"question": "Does this radio/cd reads and plays homemade CD?", "document": ["I bought an inexpensive DUAL radio for my SUV. After the radio was installed for 6 months, the tuner quit working, but the CD continued to operate. The radio was replaced under warranty and then the tuner quit again after a year. Now my non-functioning Dual radio is just an expensive LED clock.Edit: Each time the faceplate stops functioning, I disconnect the power to reset the radio and it works again. This happens mostly during cold weather.", "this radio is great. good sound quality, nice amount of bass, i normally don't like front panel aux ports, but this one is ok. the only bad thing is when the display moves down, the radio tilts so you can't get to the cd player, but i'm sure this is a mounting issue for my car only (2009 subaru legacy), which can easly be fixed with some duct tape on the mounting hardware.", "I like the motorized face plate which not only is cool but makes for a neat appearance- and the remote-especially considering this went into a van where the reach to the console is a bit larger. switching between cd,radio and an ipod/mp3 plugged into the front jack is a tap of a button. This unit could stand along side the more recognized name brand unit with non-stock speakers that is in my other vehicle.", "My 17 year old son bought this for his car, along with some other corresponding products. He was able to replace his 6 CD changer with this in no time and is very happy with the sound quality.", "I had one glitch with the random play on CD, but one push of the reset button, all of my problems went away. I cansee that complaints from other reviews could be fixed with the reset button. Great Audio!", "now ive had the cd player for a little less then a month and it completly stopped working, it wont close, power on or anything. I rewired it changed the fuse and nothing... dont by this product its JUNK", "i got this cd player to replace my old one and for power the one really rocks i have four 10s in my truck and running 4000 watts and this cd player was the best for the price thanks", "Would not recommend this CD player to anyone ever! its horrible! stopped working about a month after I bought it. I had to send it back and the seller did refund my money before he received this one back from me, so I could purchase another one from him, and I did. I love the new Kenwood CD player I bought from him!", "We definitely recommend this unit to anyone wanting a low cost, high quality cd player. Oh, also, the remote is a nice touch (with a lot of buttons to control everything), and the 2-step motion of the moving face is fabulous! !", "This product turn on and off by itself. my aux work sometimes or when ever it want to work. I'll change the channel and it will change to the cd player or change to aux. It sucks in the winter since it is digital. I would go with a different brand next time."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,040
|
Yes, it will power them fine, and the speakers put out great, clear sound so they should work very good as front speakers
|
{"question": "I have a Onkyo TX-NR609 connected to my TV in a small room. Would this be enough to power these speakers? Will they work well for front speakers?", "document": ["Speakers were well made except the magnets holding the front grill were not strong enough.The range and sound from the speakers was good, however, they were advertised as 4-8 ohm speakers when in reality they are only 4 ohms. They do not work with an 8 ohm receiver at all. Receiver sees this as a short and goes into Protect mode and shuts down. (Sony)", "These speakers are awesome for the price. I would say they're the best cheap speakers you can buy. Crisp highs and surprisingly good bass considering it only has a 3.5" woofer. They do lack a bit of midrange, but they make up on the low end. They are not very efficient though, so make sure you pair them up with a good amplifier. With enough power they will get loud and full.", "In my opinion; they are probably one of the best really cheap / small speakers you will find. Most speakers of this price range have a very cheap or tinny sound, some even painful; these are really quite warm and pleasant sounding.I am wrapping up my testing of these and I think I will either use them with a TV in a guest room, or possibly give them to a family member to use as surround speakers.", "The speakers did not perform as well as expected. I ordered a repair kit for my 20 plus year old JBL Pro III speakers, did it myself, and they work like new and are superior to the Micca Club 3 speakers.", "$60 is a hell of a deal!I haven't had a problem with the covers. Another reviewer said they didn't work because the magnets weren't strong enough. Must have been a quality control issue. I think its a nice touch.", "my Bass egg verb works better...but are great supplement speakers for the mid range sounds .... also I have 15" woofers that make anything sound less...these are very well built speakers and I would recommended them.....", "The Micca Club 3 bookshelf speakers are extremely pleasing to listen to. High end clarity is like crystal and they have enough tight bass to give them a full rich sound. I'm driving them with the ever popular Lapai LP2020A+ amplifier and that setup just simply sounds great. I have to suppose that hooked to a really decent receiver they would sound even better. Micca says the Club 3's will handle 75 watts each! Hard to imagine a three and one half inch speaker capable of that. Lots of potential there.", "It's not that it sounds bad, it doesn't; but it hurts the efficiency. These are very power hungry and the handy dandy Lapai amp which many will buy to drive these is not going to produce any great volume from them.As mentioned in my 3rd remark, the Lapai amp at my office just couldn't get a lot of volume out of these due to the low efficiency. It was enough for normal office volumes, but I couldn't crank them without the amp distorting.", "They're selling their Clubs short. These speakers are rated at 75w per. I'm breaking them in as fronts using a Harmon Kardon 1510 receiver, which pushes 75w per., and has adjustable db ranges. Although, I don't listen to my music loud, I can tell you these things can handle a lot more power than many headphone amps can put out, and do so without while remaining amazingly clear.Inside, the speaker uses a 3.3uf 100v capacitor connected to the pos.", "The bass is solid and tight, though not as full as those just mentioned, but you can still hear the kick of the kick drum. Yes, the Clubs will fill a small to medium size room with deep, tight bass and clear mids and highs."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,047
|
China
|
{"question": "Where was this pan made?", "document": ["This pan is real cast iron. It's not nonstick; although, from the picture it appears to have a Teflon coating. I recommend that you \"season\" the pan before use or else your batter will stick and burn. It's very heavy for its small size and does weight close to 5 lbs. The more you use it the easier it will become to cook with. Other than takoyaki, I've made mini ebelskiver (pancakes) and they came out perfectly!", "I ordered this based on the description of cast iron. DO NOT be deceived this is not cast iron, straight out of the box black paint was chipping revealing a white/silver surface. This is nothing more than some toxic s--t duping itself for cast iron. Move forward with an American made product or a brand you trust !", "I'm going to buy a different pan and try that out.", "Am looking for different uses for this cool pan - that includes using it for crafts! Am waiting for feedback for family who are all teachers.", "After seasoning my new takoyaki pan a few times, I was able to cook my takoyaki and aebleskiver without sticking. The size is perfect.", "Best bargin around. Plan on using it soon after I get all my ingredients together. I've looked at other places for a cast iron takoyaki pan. All over my price range. This is a good deal.", "I bought two of these a few days ago. And I used one of them to make takoyaki. After the very first use, and leaving it for the very next day to wash, a large amount of rust appeared on both top and bottom. In translation, this pan is now no longer safe to be used again. And I can't return them, because I threw the boxes away.", "the pan have coating not disclose on Amazon. it may have disclosure/warning in Japanese/Chinese on the box in red. tried to wash it would not come off. after clean with soap and hot water, my first batch of cooking stuck to the pan. tried to clean the pan and attempted to season it but i don't think it working, my batch still sticking to the pan.", "Very annoying to deal with.In addition, the cooking surface of this pan is \"painted\", yes, with paint that may or may not be safe.When making takoyaki using a takoyaki pick, this paint scrapes off and ends up in the takoyaki.Nobody I know likes to have takoyaki with paint chips in them.I rated it 2 stars, but it could be more if the product wasn't painted and matched the \"sales\" photo.", "I loved cast iron so I ordered this instead of the aluminum pan. I used it three times over my gas stove. Even though I preheated the pan over medium heat for a good 7-10 minutes, each time the center compartments get very hot and burns the batter while the outer edges barely cooks the batter. It's also very hard to flip due to constant sticking even though I put a generous amount of oil on the pan and in each compartment."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,060
|
The main point of a conical is for the yeast to settle in a manner that when you rack your precious beer yeast and trub don´t come along. That´s why there is a valve on it´s side. If it were only to harvest yeast, there would be only one valve in the bottom. Depending on how much yeast and trub forms, you can rack to a secondary, keg or bottle it directly from the side valve. And then repitch that yeast without having to clean and all...There is always a DIY installing a bottom valve!
|
{"question": "Isn't the main point of a conical fermenter to be able to pull the trub and yeast out of the bottom at the end? The valve pictured is on the side.", "document": ["Pros: Easy to clean, Conical, weight (it’s plastic), priceCons: it will hold less than 3G of worth (since you need to leave some head space)the 3 legs disassemble very easy, so creating a mess is really easyThere is only one spigot hole (side) but should have 2, one on the side, and one on the bottom to purge yeast", "great fermentor, i really enjoy having a small batch conical, great for all brewing types. LME, DME and all grain, i love it.", "It would save everyone a ton of trouble if this was included. Kind of a dubious business decision not to include this essential part. If Amazon is going to offer this fermenter for Prime customers they should also offer the stopper.", "Don't buy this junk....I'm gonna keep it short and sweet by saying that before i got ANY type of resistance while tightening the spigot onto the fermenter, it snapped right in two rendering it useless. The hardware isn't anywhere near the quality that you would find on a typical bottling bucket. That's Pretty Sad If you Ask me.....", "Perfect size for test batches. This allows you to brew a case(12 oz. bottles) of beer at a time instead of brewing 5 or more gallons.A lot better than any of the other 2-3 gallon fermenters on the market. This fermenter seals well to keep your brew \"safe\" from infection. No gasket in the middle of the fermenter to leak and cause a mess.", "I like the size of this conical, I have another professional grade 12 gallon from an internet beer seller. This one doesn't have all the bells and whistles, but it is really nice for quick batches. Go buy a 5 gallon kit, and cut everything in half for a test batch. I will say, don't trust the spigot! I put some star-San in my conical and let it sit for a day.", "This should work good for any 2.5 gallon batch. 3 gallons leaves no head room. Has accurate volume measurements on the back which was a nice surprise. Hand tightened the valve, and tested it. There were no leaks.The only thing that I don't like is that it doesn't come with a plug that you can stick an airlock or a blowoff tube in. You will need a 5/8 inch plug with a hole drilled in it.", "This is the best product for small batches of beer. If you are experimenting or just drink small batches(2.5 Gal)Then this is the product for you. Works great, very economical for experimentations. Product designed well and performs as expected.", "This is a great product, but the fermenting vessel does not ship with gasket for the plastic lid or with a drilled stopper for an airlock.", "Spigot in my hand and sanitizing solution all over! I rotary tooled out the hole and used a brew bucket spigot. So far, so good."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,089
|
No, the included mic will become the primary mic over the in line mic.
|
{"question": "Can this device use the inline mic included on some headphones - bypassing the included mic?", "document": ["Have your favorite headphones but want Bluetooth? Want something simple and easy to use?This little BlueSense CLP is JUST AWESOME.I have paired this with my tablet, cell, CAR RADIO (just to try it, I didn't drive with my earbuds in). ANYTHING with Bluetooth and this little module works a treat. Sound quality is great and mic is crystal clear when making calls (yes, you can make and take cell calls too).", "The module is about the size of a pack of gum and a bit awkward to clip somewhere where your voice will be picked up. I would have preferred an inline mic that would be less bulky and allow the module to reside somewhere out of the way. Even that isn't why I deducted the star.The reason for only 4 stars is the volume of the indicator tones that tell you when it's powering up, going into pairing mode or shutting off.", "It charges quickly via the USB cable or the wall charger that it comes with and the battery lasts for several hours. Plus it has a mic on the side so you can use it for Bluetooth calling if you want.", "perfect to use with phone & any bluetooth enabled device & options to use any headphones with it, it is easy to use & so far, i am very content with this item", "It will not blast your ears, but it is definitely loud enough to drown out background noise.My only real CON is that the construction doesn't feel incredibly sturdy. I haven't had any issues with the device, but it doesn't feel like it will hold up to the same abuse as my iPhone. Also, the headphones that come with the device are horrible. They should save a few cents and not even include them.Controls are easy to use and the clip holds well. I would definitely buy it again.", "The result is, I generally use the LED indicators on the front of the module to see when the device powered on and only put the headphones in my ears when it is. I take them out before turning it off, too. As someone who makes my living off my ability to hear and see very well, I can't afford to have loud beeps being directed into my ears on a regular basis.So, if I find a way to make the beeps softer, I'd go with a 5 star rating.", "Forget bluetooth headphones and headsets - this lets you use your own headphones and connect to your device (in my case an iPhone 5) vis bluetooth. Granted, it does come with a nice pair of earbuds with changeable earpieces, but I got it to use with my Sennheiser over-ear headphones at work. I haven't tested the distance, but I'm probably not going to put that to the test. I got this so that I can get up from my desk without disconnecting from my music.", "I purchased this bluetooth receiver to use with my Sleepphones that I use at night. It is definitely much better than plugging them directly into my phone. The sound quality seems great. I don't notice any difference in quality between the GOgroove and when my headphones are plugged in directly to the phone.The battery charge lasts about seven hours which is actually pretty good for a device in this price range. That is usually long enough on weeknights but it would be nice if it lasted another hour or two on weekend mornings.", "I just want to be able to stick this in my pocket, pull it out when I want to change the song or answer a call, and talk through a regular headset that has a mic on it.", "The headphones are good but the bluetooth never synced with any device i had. I tried 3 cell phones, my tablet and even laptop"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,103
|
I think as long as you have a Type A bag, you are OK with the upright Hoovers. Best Wishes!
|
{"question": "I have a Hoover type A bag part #43655-010, I would like to know those bags fit on my vaccum cleaner?", "document": ["I ordered the 10 \"replacement\" bags at the same time that I ordered the Hoover WindTunnel (U5140-900 Tempo Widepath Bagged Upright) Vacuum Cleaner. Instead of the type Y bags required by the vacuum, they shipped type A, which are too large to fit the machine. I will try using them by folding the ends, but would have preferred to get the proper bags!", "I'm amazed at some of the reviews that complain that this Type \"A\" bag is not a Type \"Y\" bag. :-\\Looks like somebody sent the wrong bags with a vacuum cleaner they ordered - not a problem with the bags.This is a good generic bag, that fits vacuum cleaners that need a Type A bag. No bells and whistles, but really good and for a good price.", "I ordered a Hoover Tempo Widepath Vacuum Cleaner and also ordered the replacement bags that were offered with the vacuum cleaner. However, the bags that were sent were type A instead of type Y that the bags require. I read the reviews of the Vacuum Cleaner but not the bags so I didn't realize that Amazon was sending out the wrong bags until after they came. Amazon was great about returning them but you would think that they would catch their mistake.John", "I bought a package of 10 Hoover Type A Upright Vacuum Cleaner Replacement Bags. That's whatBut actually I received 3 packages of 3 and one bag out of the package!How can some one sell something with a package? The bag doesn't contain all the instruction the the package has.Very disappointed.", "I ordered a Hoover Tempo Widepath Vacuum Cleaner and also ordered the replacement bags that were offered with the vacuum cleaner. However, the bags that were sent were type A instead of type Y that the bags require.", "No complaints with this item! These are genuine Hoover Type A bags (they fit my 10-year-old Hoover Elite hard-case vacuum). Target charges $5.99 plus tax for 3 bags--this package of 10 is a great deal.", "I bought these bags because the other reviews claim they were as good as originals. I found they are a perfect fit to my vacuum cleanerHoover Tempo WidePath Bagged Upright Vacuum, U5140900and work and look just like the originals. They work as designed and have not leaked or broken as expected of quality bags. I would buy them again easily. I rate them 5 stars because they work just like original bags and are cheaper per piece.", "These bags, at a great price, work as well as the original Hoover bags that came with the machine. They are durable and fit like a glove!", "Unplug the vacuum cleaner first!#2 Of course you don't cut the top of the bag--all the dust would fly out. Just push hard, stick the opening on the collar, shove the bag back down, and and slide the clip to close it up.I've written this in case anyone else is a vacuum-cleaner-bag-challenged as I am. There's a video. It looks simple. I'm going to go try it now.", "Yes I also ordered replacement bags at the time of purchase of the Hoover US140-900 Tempo Widepath Bagged Upright Vacuum and received the A bag not the Y bag required for this machine."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,110
|
I don't think you can
|
{"question": "How to disable the guidance lines on the screen?", "document": ["Wireless is unreliable from my experiences so ordered this one mainly for the price. Well worth the order. Simple install. Wired it to a switch on my dash and glued display to dash. Resolution is great. Only down side I've found is the "distance gauge" lines on the screen. Can't find a way to adjust them or disable. So if you can live with these lines, then buy it.", "the camera works fine but the scale lines are off to one side of the screen. I mounted the camera on the bumper right above my hitch and had to move the camera about 1 inch off center to get the hitch centered in the picture. Wish there was a way to adjust the scale lines. Other than that its fine", "But only just long enough for my application. You mileage will vary.- The wide angle doesn't look to be 170 degrees but without measuring it, I cannot be sure. It is wide enough for me to see my full rear and the backup lines are done well.- Great picture during the day, not so much at night when it is pitch dark.. With street lights it is fine enough.", "Installation was easy, though you need some soldering experience. The screen looks great and it's a perfect fit right below center dash (below 4x4 switch in empty space of 2010 Nissan Frontier). The camera works great during the day but suffers a bit at night, also it it rains you must constantly clean the lens. For the price, you can't beat this combo...i do recommend a better camera for low light conditions.", "I bought this system because I wanted a higher resolution camera and display with 2 video inputs. Giving it 4 stars because of the wire gauge, viewing angle, and poor almost no light view on the camera. Monitor and mount is plastic and camera is metal. I like the size of the screen and suction seems to keep it on the windshield just fine. Would have been 5 if these things were improved but for the price I cannot complain that much.", "When it works it works well but for some reason after about a month I have to turn the monitor on and off a few times to get the monitor to stay on regardless of which video input is used. Other than that it's good. I have to keep the video on because I need to be able to see when people want to pass because it's used on single lane dirt roads and I can't see out the back window.", "Useless with Minnesota license plates. Putting the camera across the top of the plate covers the state name on the plate, which is technically illegal. Putting the camera across the bottom of the plate covers the tabs. For this to work I would need to cut down the ends of the camera mount to preventing covering the tabs.I'm also not seeing this as a particularly good model for use with a minivan with a liftgate in the back.", "Turning on the monitor.Here is a link on how the relay works with a good explanation and diagram. Copy and paste it into your browser.[... ]So the final result. When the switch is OFF the power feeding the monitor comes from the reverse light power. The camera is also powered by the reverse light.", "This will be the normal power provided with the switch OFF. Power will come from the reverse lights and the camera and monitor will only come on when the vehicle is in reverse.6. Plugged in connector 30 to the monitor positive red wire. Ran this under the dash, around the left post to the head liner and over to the monitor.7. purchased a second long RCA video cable for the camper backup camera.", "This was for our son, and he has not had time to install it as yet. I would like to rate this at a later date."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,126
|
I think China but I had read reviews that people had done lead testing on them and they were negative. I have had one for a few years and sent pics of some minor chipping and they sent me a replacement out after seeing the wear and tear. I have lecruest lodge and descoware and so far lodge are my favorite.
|
{"question": "Where is it made USA or China", "document": ["Very happy & pleased w/ this product. When I first received I was extremely hesitant to use as I saw a huge label \"MADE IN CHINA\"! Very disappointed as I was under the assumption Lodge products were USA made only. Before use, I emailed Lodge stating my concerns in using this product. I was assured the product was FDA approved before it was placed on the market. I have now used many times & am very happy with the product. Heats evenly and the clean up is a BREEZE!", "Make sure you don't clean it with an abrasive; I made that mistake with my Le Crueset dutch oven, and it scratched the bottom badly. Use a sponge and a mild abrasive, such as Bon Ami. You won't regret this purchase!", "Made my second excellent pot roast for Easter in this baby (the first one was while holed up during Hurricane Sandy) .. heats evenly.. cleans easily.. attractive enough to serve in.. what more can I ask for... oh, that's right... the price is right!", "This is a quality casserole! Although I have used it only once (I don't cook every day), I am quite pleased with it. It is well made and heavy; the lid fits well; the pan heats beautifully; the spaghetti sauce I made in it tasted terrific. I gave it a 4-star rating because of the color. I like brown, but this pan isn't very pretty---kind of looks like mud.", "WONDERFUL!!!! I truly love this braiser; it is in constant use in my kitchen. It's a bit heavy, but well worth it. It is a fraction of the cost of other braisers I've looked at. No matter if your frying meat, or making rice dishes...everything turns out spectacular! It cleans very easily with soap and water and a plastic scrub-brush. I highly recommend this item.", "This works great and like all Lodge products is the quality you expect. I would not hesitate to recommend this item if it is the correct size for your needs. The price was right also. I did purchase this from Amazon.", "This pan heats so evenly and well that I'm able to cook at a much lower setting than with other pans. Clean-up is easy if you've used oil or cooking spray--just a little dish soap gets everything with no scrubbing necessary. The pan's capacity is just right for making a casserole or stew for six but it's not as deep as a traditional dutch oven. I handle with care around my ceramic cooktop because of the weight and because sliding the pan could cause scratches.", "This pan IS heavy but that will not come as a surprise to anyone who's cooked with cast iron. It's a great pan for either stovetop or oven. Highly recommended.", "This Lodge pan is useful for cooking on the stove-top as well as in the oven. However, it's not non-stick, so be sure to use butter, oil, or a non-stick spray. Detailed instructions on use and care are included and the pan comes in several gorgeous colors. We finally decided on cafe' brown and are very pleased with the appearance. (If you have an induction cooktop, Lodge pans are definitely the best choice!)", "OK, first it's HEAVY. That's the idea with these. Right? The enamel is a good color and well applied. This particular model is not very deep. It's not going to do gumbo for 10. You can do a long slow cook in the oven, whip it out (covered) onto a trivet and it will hold the heat while you bake up some rolls. You can start your dish on the stovetop for some high temp browning then put it in slow oven and forget it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,168
|
The Traffic Flow Signal Rejection (TFSR) helps eliminate alerts from radar based traffic flow sensors.
|
{"question": "What is the TFSR on/off setting?", "document": ["This product goes off all the time. I have it set to the lowest setting and it still goes off for no reason. When it does go off it has multiple alarms. With so many alarms, you can't trust if it is true or not.", "Here are the settings I use: Filter 1 mode (it's actually the 2nd filter setting, somewhat confusing), X- off, K- on, Ka-RSID, POP-off, Laser-LSID (laser signature I.D.", "Ka band is not affected by the TFSR feature. [more on this in a future article]I have come to really appreciate Whistler's CITY mode. Unlike other detectors, which wean effective reception performance to X-band (and perhaps K-band) when selected, Whistler provides three city modes.The first mode, doesn't affect apparent sensitivity at all, it merely alters the nature of the detector's alerts.", "The problem is that proximate conventional radar detectors not only repeatedly false to K-band, but they false in a manner that mimics genuine instant-on radar--something that is very disheartening to the unsuspecting motorist.In my recent travels, I found when Whistler's TFSR filter was enabled, the Pro-78SE effectively eliminated falsing in all but a couple of instances--when I was located in proximity to two sensors that fired in close succession.", "When TFSR and FILTER 1 are enabled together, all falses from these sources appeared to be eliminated.As with any increase in filtering \"delay,\" one has to consider this double edged sword for the bands affected by such a feature as it can increase the likelihood of ignoring a quick trigger. Such is the case for the TFSR mode in that there is a minimum length of time the X or K band signal needs to be available for qualification in order to ignore the pulsed traffic flow sensors mentioned above.", "I live way out in the country so false alarms aren't that common. With this one, it would false in the middle of a farm field. I thought I might have a setting wrong so I turned off POP and X and tried it. Well, the next couple of falses blew the speaker. Didn't ever even pick up legit radar. Okay, must be a bad unit, let's get another one shipped in.", "08/27/13 - Update: Speaker is blown. I saw this problem in other reviews and I now know why!. I sent back to Whistler for warranty. It claims a 3 yr warranty so we'll see what they do. I downgraded from 4 star to 3 star.Original review - This unit works pretty well. It does not work so well in large cities as it picks up every thing and never stops going off regardless to the setting.", "yeah good answer, cripple my high end detector so you do not have to fix it.well i tested this whistler side by side with my bel. the whistler has LESS false alarms and better range.bye bye bell you just lost a customer of 15 years.UPDATE: 08/20/12: The speaker went bad but it was replaced under warranty.", "works great, does not detect the newer radars that illinois is now using from bridges, and some mobiles. other bands does a good job.", "most of the time it never alerts to the cop even though i know they are running radar. i've never had a laser warning even though I drive 80 highway miles a day to and from work. maybe the unit i purchased was defective or in all likelyhood it's just not good enough to handle the instant on radar and laser guns. i've mounted the unit high and low on the windshield so that's not the problem."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,170
|
Yes , only sucky part is you have to assemble EVERYTHING
|
{"question": "Does the order include the chairs AND table? Only asking because I ordered a different set for someone else before and it came with a table only", "document": ["I just moved into my first appartment and this table is the perfect size for the dining area. It is big enough for us to sit and eat confortably without feeling smashed together. It is sturdy as well. There was a little rust but I think that is because I ordered it during blizzard season. That cleaned right off. I love this tableset and my family are asking me where they can get one!", "The table came damaged on one corner so I got a replacement ..............the table was easy to put together, the chairs a bit tricky ...you will need a power drill better....I didn't have one so i used a regular screwdriver so my hands were sore after I finish everything....you actually have to drill the screws into the wood...it does not have any holes.", "Super fast shipping. Item was as described, however a few gripes.The 2 table bases are welded off center, I had to bend it to make it fit flush. The chairs have the same problem. The "wood" feels like cheap foam board with wood colored tape. Stains easy and streaks easy.Overall it's a table, which is what we needed.", "This Kenefick five piece dining set is great for my little apartment!! Easy to put together. You will have to put together both tables and chairs but they are sturdy and look great in person!! !", "This dining set is exactly what I hoped it would be, as it was priced right, and looksgood in the space I wanted to fill.", "Great table for an apartment. It is small and simple. The chairs are not too comfortable, but if you throw some seat cushions on them they are perfect :)", "love it fits my apartment perfectly took me bout 2 hours to put it together because of course i did it myself but over all it was worth it cute little set for the price just bought some chair coushins and matching table cloth for it", "When I moved and had to sell everything I owned, I cried over my old dining set, then I looked at this one and thought...maybe. Well I don't miss it anymore! My new dining set is perfect! It has a good size for a small apartment like mine.", "This product arrived in terrible conditions. I putting together and the wood was not even and it looked terrible. The chairs were a pain to put together and I just did one and the wood didn't have the holes to screw it in together. I def. want my money back.", "After hunting on other website for a while like craig's list, we settled on this set. Assembly is easy, it comfortably holds 4 people, and doesn't take up a lot of room. The cons would be that it looks like it won't hold up for more than a decade or so. The structure is there, the wood is just very thin. It's a great first dining table set for an apartment or new home."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,179
|
Frequencies may be set manually by number.....setting 98.5 is done just like setting 99.0 or 91.4......push buttons.......
|
{"question": "I am looking for a radio that is compatible with korean frequencies specifically 98.5mhz will this radio fit that", "document": ["I was looking for a pocket-sized radio for emergency preparedness and this one seems to fit my needs. It not only has good AM/FM reception in the LA area, but it also receives selected SW frequencies as well. Light-weight and good reception. Meets my needs for my bug-out bag.", "My favorite FM stations are often at the bottom of the dial, in frequencies where many higher-priced radios falter. This radio nails them all, in two markets where I have used it in the past three weeks, so I never miss a broadcast I'm looking for. I have had three small Grundigs (two older) and two small Sonys, all of which have some challenges with some of those stations, This one is smaller.", "Alright, if you are in a pinch and want a radio, this is it. Although it lacks Single Side Band, and a noticeable amount of frequencies not available(8.00MHZ to 9.20 MHZ), It still has the capability to do what it was designed for. It's great. The only problem I really have is that my tuning bar is crooked. But it doesn't affect the performance of the radio. Worth 25 USD.", "To be fair, it was an older bookshelf radio that was getting less and less useful, but this little KA321 is amazing. I bought it initially to dx on shortwave, but then I realized that it is REALLY hard to tune in analog to known frequencies.Anyway, I use it mostly for listening to FM radio while working outside. I will either set it down and crank up the volume, or I can stick it in my pocket and listen that way.", "This was just what I was looking for. the radio picks up the FM signals I want to listen to. I didn't need the shortwave section. I bought this because of it's size and portability. I use it at work and I plug in my stereo amplified speakers. It has decent sound for what it is. I would recommend this product.", "Never have I gotten so much for $20. The fit and finish if excellent and feels well made. But just turn it on, especially with a good set of buds! I never realized how many FM stations I have! I was picking up short wave by the dozens at 4:00 PM and can hardly wait until later. I was very disappointed with the digital radio of about the same size I bought a few years back as the LCD display became useless.", "Shortwave is unpredictable by nature and with only the included whip antenna, you can't expect it to be very stable, so you may need to clamp a long wire to it which I haven't tried yet. The sound with headphones is a very pleasing stereo, not mono, which was something I was looking for in the radio before I ordered it. Sound is great either way, so no worries in this regard. On headphones, a slight amount of static may be heard in the background.", "I suspect this radio will shatter or be unrepairable if accidentally dropped on concrete or a hard surface. So keep these things in mind when considering how you’re going to use or handle the KA321.If you’re looking for a small multiband portable to get your feet wet in shortwave, or to give as a gift to someone who is clumsy. Or want a radio you won’t be upset to lose or break while camping, walking, etc.", "The Kaito KA321 radio is just what I was looking for, It is smaller than my cell phone. The sound coming from the small speaker is amazing for a radio of this size, I received it this morning and I have had it on all day. It picks up FM and AM stations really well, The shortwave stations come in somewhat clear after dark. Still it is a very good radio for it's size and price, I have it on my desk and it hardly takes up any space.", "I was looking forward to this radio after reading all of the glowing reviews, but as happens sometimes, the reality didn't match the hype. I could only ever get the primary FM band to pull a good signal, everything else was mostly buzz and static. Worse, the single FM band that performed for me at home and outside, didn't work at all at my desk at work. I live and work in the metro DC area, so its not like there is a dearth of signals here."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,211
|
It typically beeps about every second until you push the stop button. If you just ignore it, it will beep about 20 times and then stop on its own, showing the time you set on the alarm. I find this timer works very well; it survives being knocked down from the stove -- it is durable -- well worth the price.
|
{"question": "does it KEEP alarming, or just beep and shut up?", "document": ["Use this for my exercise-my home machines have a timer-but this has a beep for me to pace myself and or make changes to my workouts.", "Advertised as "Loud Alarm/Beep", not true. That was the reason I bought this timer, could have picked up something comparable anywhere and saved the shipping.", "I bought this so that I wouldn't have to use my deafening, incessantly beeping microwave timer. Now I have two deafening, incessantly beeping timers.Deafening is an exaggeration - this timer is loud when it goes off and is equally loud whenever you press any of its buttons. So if you want to set it to 15 minutes, you have to press MIN(utes) 15 times, and hear it beep loudly each time.", "We recently replaced our kitchen appliances. Unlike my old ones, the timers on the stove and microwave beeped at a very low volume. I called the manufacturer and asked how the volume could be increased and was told that was impossible. After over-cooking many dishes because I didn't hear the "bing" I decided to find a loud timer, and discovered this. It's loud. Better still, it keeps beeping until you shut it off.", "was smaller than I thought but that's ok - it stands up, has a magnet, very easy to use, I like it.", "used in an industrial setting and easy to use. alarm tone is loud but not overbearing. I just take it with me if im not in the kitchen!", "the whole thing is not 2" square.If your hearing is 100%, it might sound loud, but I kinda doubt it, as my 23 year old daughter with perfect hearing said it wasn't loud to her either.Thank goodness for Amazon's return policy. It was back in the bag waiting for pickup 5 minutes after it arrived.BTW: the loudest alarm I have found yet is the Thermoworks "Extra Big and Loud" alarm.", "ordered 2 of these, one stopped working right away, not sure if I want to deal with the hassle of a return for a $10 item. magnet is tiny, and the alarm is not loud at all. very dissapointed", "i know this unit looks pretty and i know mom like it too, but she said it is not that laugh like the cube", "Works exactly like it's supposed to. Nicely set up to stand up or use the magnet to attach it to the fridge."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,241
|
It works fine for me and I'm using Windows 7 professional
|
{"question": "Will this work with Windows 7 fax and scan?", "document": ["It took a few tries to get this to work. For some reason Windows 7 Ultimate Fax and Scan doesn't like it. I bought a cheap piece of software called Essential Fax that does the trick. I have Broadband and only use it for faxes.", "Product was plug and play with my Windows 7 PC, sent my first fax using it with Windows 7's built-in Fax and Scan software with no problems. A software driver disk was included but wasn't needed. Excellent price. Product ordered Jul 22 delivered Aug 2nd--well ahead of Aug 15-31 est. delivery date--but shipment was apparently coming all the way from China, so beware if you're in a hurry for delivery!", "They do not work. I ordered 3 of these. Win 7 pro recognized and installed drivers. That's where it ended. When I tried to send a fax, it showed fax. But, when I tried to select a "Fax" printer, none was available. It would only print to the installed default printer.I tried deleting the windows installation and installing the driver from the mini disk that came with the modem.", "I purchased four of these USB modems with plans to replace outdated standard modems on a Windows server. They are used as a fax server. Since they were advertised as working with Windows 7, I assuned they would work with a 2008 server. The drivers on the disk are for two different internal chips. Apparently the company sells the modem with different insides. None of the drivers worked, and there is no brand name, or company site to support you.", "it does not have the proper signature to work with windows 7 (64bit) and can notfind any driver even on line that it works with.", "i have a windows 7 64 bit lap top I have tried every thing to try and get this to work and can not get it to do nothing at all will not install the drivers no matter what you do don't get it you will get some thing that just don't work at all ( -;", "I may have to build a standalone Windows 7 environment as a dedicated fax server.", "This beats having to go to the local library and paying 50 cents a sheet to fax something. It was plug and play for windows 7. Just use the stock fax program on my computer. Well worth the 15 bucks.", "Title says it all - this does not work. It might as well be a tinker toy - it may be. I have a relatively new computer, Windows 7 and this would not install. In this day and age, it is UTTERLY RIDICULOUS for any computer component to not be PLUG & PLAY - this most definitely is not. It comes with a disk with several 'set-up' programs on it and no instructions telling you which set-up program to run. None run automatically.", "My windows 7 computer recognized this modem, but had no driver for it. Windows searched the web for a driver, but came up empty. The setup on the furnished CD came up empty too. Trying "update driver" did not work; no driver available. The seller "Standbyon" was very courteous and offered exchange, or refund without return. I opted for refund which they promptly gave."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,258
|
http://www.youtube.com/watch?v=YjlsP9KDjcsamazing what a little internet search can learn you!
|
{"question": "How do I fold it back?", "document": ["As a new photographer I am thrilled to have this. It took me a while to figure out how to fold it back up and put it in its bag. It is big which is nice to have!", "Great quality, lightweighted and really easy to fold back and store in its bag.Everything I was looking for in a reflector!", "Love this reflector because of its diversity and ease of use. The only issue I have is not knowing how to fold it back into its bag. Im about 5'8 and it covers over half of my body when fully opened! Very useful on shoots!", "I received a nice size reflector with flexibility and decent quality. If you can not figure out how to fold the reflector back up, like me, then I recommend checking out Youtube. Overall, I am happy with the purchase.", "I came within a few days of my purchase, and it just the right size for what I need it for. I love having the options to change out the disc if I need to and that I can just fold it right back up for easy storage or travel.", "What can I say! This reflector has been awesome! I have used it on several shoots and have produced some great shots with it. Price is great results are greater. It is a little tricky at first to fold back up but once you get used to twisting it, it becomes second nature.", "This thing does exactly what its supposed to do and its gigantic. took me a bit to figure out how to fold it back up but once you do its not hard. Not exactly rugged but hey its fabric. I've seen the same thing (only snooty name brand) go for triple what I paid here. Great Bargin, Great Product", "I love the 5 different uses for this one product and it is very good quality for the price. I do admit, I had to watch a YouTube video to figure out how to re-fold it to get it back in the case, but once you learn "the trick" it only takes two seconds to fold it up!", "A great value in photography - something that is hard to come by these days with increasing prices.Quality product. Easy to fold back into case. Lightweight yet strong. I carry it on every photo shoot. At this price (~13) I'm going to pick up a few more.", "Works for what is needed. The only thing I don't like is that it is a pain in the butt to get it back into the little pouch. There is nothing to show how to fold it back up. It took a minute for me to get it but I finally did. It wasn't as nice as it what when I took it out of the pouch. Now when I fold it into the pouch it's a bit lumpy! Lol"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,272
|
This will fit any 10.1 however the cutouts may not be the same. This has two hole cutouts at the center top.
|
{"question": "Will it fit a Samsung Note 10.1?", "document": ["I've ordered Amor suit protectors numerous times for phones and this is the first one for a tablet definitely worth it .A little hard to apply but after numerous attempts finally got it on my Samsung galaxy note 10.1. Will outer again if needed from this seller", "I had to trust the instructions a bit. It said the small bubbles and imperfections would disappear over a few days. They were right on. I like the wet installation. Very similar to vehicle wraps I've done in the past. Even on the 10.1 Samsung Note, which I'm using the pen on to write this review, after a few days, there is a perfect finish and no tackiness to the display that I've experienced with other screen protectors.", "This product arrived fast and was exactly as described. It is a great fit for my samsung galaxy 2 10.1! would buy this again.", "Bought this for my Samsung Galaxy Tab 2 10.1 and has the right cutout to fit the screen. Goes on easy and protects as it stated. Has good clarity and resistance.", "The protective shield doesn't fit the Samsung Galaxy tab 2 10.1 exactly. The shield is slightly bigger than the tablet. Because of this the shield doesn't sits flush on the tablet etches. It is just a question of time until the shield will come off the tablet.", "My husband had a doubt at first when i ordered this product on line; when the product arrived he then installed it on the tablet following the instruction from the page the supplier had provided and then like a magic its just beautiful. No bubbles, perfect fit for my samsung tab 10.1 and no visible scratch til now ( 3 weeks already). My husband told me its a good choice.. : )", "The shield was accurately described and was an ideal fit for my Samsung Galaxy Tab 2 10.1. After going over the information material provided with the screen protector and online, installation was quite easy. Being my first one, had a minor re-do on one end of the tablet while placing the protector. Like many, I wondered about the result immediately after installation.", "The ArmorSuit MilitaryShield - Samsung Galaxy Tab 2 - 10.1 Screen Protector Shield, is a perfect fit for my tablet. I ordered the ArmorSuit MilitaryShield Screen Protector Shield, from YesAvenue and they shipped the correct product for my Samsung Galaxy Tab 2. I placed my order on June 4, 2012, and the idem arrived very precised June 6, 2012. I will DEFINITELY purchase from YesAvenue again if the need something they provide.", "The entire problem with this product, other than the installation method of spraying a liquid all over your tablet, is that it's a rubbery feeling material. For most tablets where you only use your fingers, this would probably be fine. However, the Galaxy Note 10.1 comes with the S Pen, the sharp point of which leaves little dimples and tracks all over the rubbery screen.", "Do go thinking this thing is indestructible its not! But its good for a screen protector! Fit my Tab 10.1 with no problem!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,319
|
It has .9 HP. I believe it is a little less than 700 Watts. Please see this review:http://www.popularmechanics.com/technology/gadgets/tests/4332328
|
{"question": "What is the watts of power?", "document": ["We really enjoy our new blender, it has all the settings we ever need. Power is outstanding, easy to use and clean.", "After 3 months of DAILY smoothies, we love this blender! Easy to use, strong, durable and lots of power. Makes SNOW out of ice!", "The power is ideal. Yet, so quiet. Love the easy cleaning on the machine. Just a few drops of dish wash liquid and run the machine, then rinse. All done. The "hide the extra cord" design feature is very thoughtful. Our last blender was glass. So heavy. Took up too much space in the dishwasher daily. This big boy is so light. The blades are elegantly designed.", "The kitchenaid has a very powerful motor that can power through just about any ice concoction. Unfortunately, like most appliances it is only as good as it's weakest piece. The weak link here is the little hard rubber gear on the top of the blender that connects to the pitcher. In the last 12 month I have gone through 3 of these machines. You are much better off with either the Ninja or just step up to a Vitamix or Blendtec. The Ninja is incredible, but be careful of it's razor sharp blades", "I mainly use it to make very thick frozen fruit smoothies and I am very happy with the ultra-smooth texture I can achieve now (I still have to stop the blender and stir a few times though). The one complaint I have is that it is rather easy to turn on the blender by accident if you forget to press the power button twice (once to stop blending, twice to turn off the machine) and then lean on or brush up against the flat button panel, so be careful.", "i have seen it work it i was truly surprised,i have had others brands but never like this thanks keep up the good work", "dont take your hands off this blender. It is so light it will fly off the counter if unattended for even a second.Look for one with a glass pitcher.My old kitchenaid blender lasted for 20 years and I hoped this would replace it.", "You're nuts to buy a Vitamix when you can own this machine for 1/4th cost. It liquefies anything thing you throw in it including orange peel and seeds, apples core and all. The real test was flax seed which it ground it up so fine it was not detectable. It does an equally remarkable job on leafy vegetables. I confess that I ordered mine through Bed Bath and Beyond for $120 which includes shipping but not tax.", "YES! We bought the KitchenAid Diamond KSB1575 in summer 2013. Per other reviews, it's terrific bang for the buck at crushing ice, chopping ingredients for food prep and processing fibrous fruits and vegetables into impeccable smoothies. It's easy to clean inside and out, without a bunch of over-designed crevices that force you to use a toothpick. The pitcher is definitely plastic -- not glass.NO! Six months later, the pitcher began leaking at the bottom.", "Wow this blender can handle anything. Quite too. Highly recommend it"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,328
|
Yes
|
{"question": "Is it 120V (normal house current) for the USA?", "document": ["This light is an amazing buy! The modeling light is nice, but a little annoying that it shuts off during flash (which is normal), but it does not come back up until recharged. The cycle time is plenty fast and proves to be no problem for my shooting style. The variable settings work well and I usually have it set on the low end about 1/4 or so.", "I have zero experience with studio flashes so I bought this cheap light to see what it could do. It can totally light up any room in my house. It recycles about once a second at full power. The modeling light helps compose shots. I can't really compare it to anything except my cheap Neewer tt560 speedlight and it's a lot brighter than that. The one issue I've had is that the power of the flash doesn't seem to be perfectly controllable. It doesn't seem like I can turn it down.", "which doesn't affect a shoot at all.infact it gives you a chance to review a shot quickly and glance at the histogram to make sure all is in order. 'i find the size of my studio to be a little small now for these guys.they are amazing. that simple.a great step into monolightsany questions please reply and ill get back to you", "they work perfectly together and i use it as a slave, so i bought triggers as well, this here, this strobe just sits in my studio pretty much. so take my advice as one thats tried every kind of light and go ahead with the big softboxes and a simple slave that you can control!", "these lights work really great. and they are half the price of the cowboy studio lights. i've been using them for about 5(?) months so far and havent had any problems at all.", "the recycle time suits my needs (fledgling) shutterbug ,I also purchased the neewer soft light box (36 x 24 ) and the box was a perfect fit", "the beep when it has cycled, cant shut it off..have considered getting inside and putting a switch in myself but i can live...the sum up.if you are looking to get past using flash units and go with bigger equipment but dont have alot of money to plunk down.this is more then enough to get you... i have 4 of these and its heaven. i think 3 would be more then enough.the recharge time at low power is fast.", "love this item i would order more very easy to use no need to use wireless remote i have my speed light canon and it triger the flash at the same time", "i bought this items and it's work one time only after that it didn't work i decide to returned back and that said ok we will refund all you money after i shipped to them they said they didn't get any items and i send them the bill with the shipping address that assure i sent the items for them but still they said "we didn't get any items" know i lose my money and the items and they get both.", "for the price the item works good I have had no problems. i will recomend this item for people on budget just starting"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,339
|
I would say approx. 7+ feet long. It was long enough to install on an upper rafter tail outside, string through and down the inside of a window. I drilled a hole under the sill and through the sill where I strung the wire in order to be able to plug inside. The outlet was under the window. I had extra cord left over that I bunched with a twist tie. Hope this helps.
|
{"question": "how long is the power cord for the cameras?", "document": ["works great and easy to setup. could use longer or extra power cord for outdoor use. haven't tried to setup IPhone yet.", "Had to mush trouble getting the camera connect . Coustom service put you on hold for about 30 minutes. The cameras keeping getting crossing each other camera.", "I live in a over 55 park.I bought it to keep my yard nice and clean! We have a lot of people that walk there dogs and don't like to clean up there dogs mess.I bought the extra 2 cameras also for the back yard because we are on the edge of the woods and have deers and turkeys that wonder through. It was very easy to set up,and the picture on the monitor is very clear!", "This system provides you with a picture of decent resolution and the abilitiy to record events 3 different ways: motion detection, scheduled events & manual programming. The only problm I have is the placement of the 4 cameras I have to avoid continuous recording while in motion detection mode. Cameras are very sensitive to nearby motion. Great overall results so far.", "will not pair, talked with uniden and still will not pair. I just gave up for now. Feel like driveing over it with my car.", "great product! i would recommend this to any one. pairs quick and easy! i will be getting another very soon!", "does what it says it does. dont care for the fact that the camera is on 24/7 and the only way to shut off is to unplug it..inconvenient depending on where it is.", "camera is very nice and the cost is not that bad.highly recommend to anyone that is looking for a security camera.", "better this time last time no good Uniden UDSC15 Outdoor Camerado not think I will buy from again at this time", "This camera was easy to match to my monitor. It was easy to install and delivers a clear consistent image."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,350
|
The Lounge is 57" long, 25" wide, and 31" on the higher side.
|
{"question": "The dimensions of this chair? What is the length,width and height?", "document": ["I spend a lot of time sitting in this chair. It's comfortable (with a few throw pillows) and easily sits me, my husband and daughter when we're reading a story together. The fabric is beautiful (a linen look beige) and not scratchy. We scotch guarded it to ensure stains don't stick because it is fairly light. For the price, you really can't beat this item.", "the chaise is easy to assemble, sturdy, and functional, BUT the color in the picture ad appears to be a light cream and i would describe this as a darker beige in the light brown family. wrong color for me is my only negative on the review.", "This is a nice lower price lounge. You would not see it on display in a local furniture store but it suits my needs so far. It is darker than the picture. I like the slightly darker color. looks nice in my bedroom. 1 concern the cushion does provide comfort and sinks in when you sit on it. Not like sitting on a board. Will this become a sink hole after years of use? I would recommend to a friend.", "The product looks like it does in the picture although not quite as white. That pleases me. It's not the best piece of furniture I have by any means, but it serves the purpose I ordered it for. There was a little smudge on front from the packing, But it wasn't worth sending it back. I can cover it with a throw! I would recommend it.", "So, this was a hot mess from the start! Quality is sub par. It looks great from far away, but close up it should have been a $99 piece at most! The material has absolutly terrible seam work. The so called "pre drilled" holes were off and messy with frayed material around the edges. You better plan on the long side piece being against a wall. It is not attractive at all from the back.", "Not having predrilled holes for the feet were a bad idea. This is probably the worst piece I have ever purchased from Amazon!", "LOOKS WONDERFUL, LOVE THE FABRIC, EXCEEDED MY EXPECTATIONS FOR THE PRICE I PAID. IT IS RELATIVELY SMALL BUT JUST WHAT I WANTED FOR IN FRONT OF MY FIREPLACE AND THE STORAGE SPACE IS HUGE. I LOVE IT! !", "I like this product for the price. It scared me that the truck with the legs and instructions arrived 4 hours after the truck with the rest of it, but everything was in great shape. PLEASE NOTE: The instructions don't say this, but the fabric on the back (\"slanted part\") of the chaise is attached to the frame with that \"hook-and-loop\" fabric. If you don't \"rip it up,\" you'll never see the holes where the bolts are supposed to go!", "Had this up in no time. Very easy to assemble and looks great in our living room. Can comfortably fit 2 adults. Storage comes in handy for a blanket or a throw. Overall for the price compared to other Chaises very satisfied!", "Great product, and so easy to assemble - looks good too! It matches the decor of my family room. The chaise arrived secure in two well packaged boxes."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,401
|
All of their polycarbonates are BPA free, restaurant grade.
|
{"question": "Is this coffee maker BPA free?", "document": ["I'd give it an A- for fit and function, which is pretty darn good for something improvised. Not to mention it only costs $12 vs. $30 for the Waring factory replacement price (if you can find one in stock).Review from a year ago (12/23/10):I just received this coffeemaker, the Free Super Saver shipping only took 3 days, so it is nice to get it so fast before X-mas.", "looks great.. disappointed that the clock only lights up when coffee maker is on. beeping sound when coffee is done is very loud.", "This has been a very good little coffee maker. It's easy to use and I haven't had any trouble out of it. I make one pot every morning and it's consistent.", "I love, love, love my Waring coffee maker. It looks great and the coffee is smooth and delicious - the price was also great.", "The coffee maker itself seems to be of better quality than the lid and pot. It's a thin glass pot and I don't have a lot of confidence that it will last. We shall see.", "This is the best automatic coffee maker I have ever owned. It does everything that consumer reports said it would and its very attractive. Will buy another when this one dies.", "Purchased this coffee maker for my office. Simple to operate, looks sleek, and coffee is hot. Very happy thus far. Great coffee maker for the price.", "Makes a super, hot and delicious cup of coffee. In fact it makes the hottest cup of coffee of any coffee maker I have owned. Looks good too", "I have been using this coffee maker for about 4 months or more. Good quality, and makes excellent coffee. I can actually pour out of this carafe without drips.", "The coffee maker is easy to use, makes good, hot coffee and is easy to clean. I can't think of another thing I would want in a coffee maker."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,408
|
Sits on rim. It is plastic though. The black parts of this teapot are very lightweight plastic and the teapot is rather small.
|
{"question": "What kind of loose tea infuser does this come with? (i.e. a ball that floats around in the pot, or the kind that sits on the rim under the lid?)", "document": ["The infuser appears to be made of stainless steel wire and it goes sufficiently deep into the pot to guarantee that loose tea would give you a brew even if you don't fill it to the rim.Both the black plastic that surrounds half of the glass bowl and the glass look and probably are 'cheap'. This is not the kind of object you would display with 'the crystals' or your antique Chinese porcelain collection.", "Years ago I was bought some fancy loose tea leaves as a gift and as I had no way of infusing them I bought one of these teapots. It has a heat resistant glass pot, plastic handle and lid and a stainless steel mesh central infuser. You pour your leaves into the infuser, pour in your hot water and hey presto, one delicious cup of tea.", "This is exactly what I was looking for. It is perfect for small loose teas since the strainer is very fine. Also, it truly holds around 5 cups. This teapot is sturdy and the lid does not fall off when pouring. I am very pleased with it!", "The pot leaks in that there is no real spout as one would expect in a tea pot. Instead, the water dribbles out of the tiny and very short spout as well as the area around the lid, which is not a strong seal. As a result, I have puddles on my table when I try to pour out a fresh cup of brewed tea. It is an attractive pot, but the utility is unsatisfactory.", "I have read the reviews listed here and I will try to address some of the concerns.1) The tea infuser as the directions DO indicate is used for loose tea. The directions on how to use the flowering tea are actually right on the box itself and I am unsure how someone could miss it. One must actually read the loose directions that come in the box to uderstand how to use the tea infuser for LOOSE tea which is in fact what a tea infuser is used for.", "Just remember that traditional tea cups are only 6 oz!Usage: I followed the instructions but it definitely didn't \"bloom\" well. In fact the ball floated straight to the top of the pot and bloomed down. Perhaps it was a faulty tea ball?I haven't used the loose tea filter yet but it looks pretty well designed. I usually use a french press for tea but I may start using this instead because it is a little easier to clean.", "I was taken by the minimalist design of the pot and liked the clear view of the tea and tea flower. The pot looks small but holds a surprising amount of liquid. The black material is plastic, the only thing I don't care for is the plastic sound when you close the lid but I like that the material doesn't burn my hands. If the infuser discolors as other reviews have said I will happily replace that one part.Overall I highly enjoy this teapot.", "This tea pot Gives you flexabled of making tea different methods. make with tea bags so-so tea or flowering tea that you can see or Make full 40 ounce of great loose tea. It works. They include the infuser for making great loose tea. you do not have to find one that works this one fits perfectly they where made for each others.", "I actually like using this infuser to drain the pot for the last cup without getting all of the loose tea bits mixed in.2) 40oz is 40oz. It makes about 5 cups of tea. I am talking about actual tea cups not going out and buying a 32oz Big Guld and calling it a tea cup.3) There is a plastic shell that does partially encase the pot...go ahead and take a look at the picture. I have mixed feelings on this.", "This is a cool idea for a product!It's a sturdy container, but the only thing was that the metal that the loose tea infuser was made of was a bit sharp and could have been made better.I think the idea is that you put the flower bud in, and each time you add more water, (Ive done it twice today) it blooms more."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,490
|
no, only American male/female voices/accents. however, you can purchase other languages. not sure how but it can be done.
|
{"question": "Does this product have che chinese voice function?", "document": ["This is the first GPS I have bought. I was skeptical, especially after talking with co-workers, but I am VERY pleased with this product. The voice on this unit is very clear. We tested the Tom Tom to see how accurate it was. We had one issue, a side street that we never use is a one-way. Tom Tom told us to go the wrong way, but we knew better.", "My family and I have always purchased Garmin's in the past and this was my first Tom Tom product. Having had extensive experience with the Garmin I simply assumed this was going to be similar or perhaps even a bit inferior. I was completely wrong. From the sleek styling to an extremely intuitive interface the Tom Tom was superior to anything I have owned from Garmin. The voice and data capabilities were easier to use and the maps were spot on as opposed to the errors I have found on occasion from Garmin.", "Before updating your unit, first make a backup using the provide function of the application before you allow it to install updates.The reason for this is that if something goes wrong during the update process you could end up with a brick...and calling customer service for help.", "it is easy to control and the touch screen is sensitive. I like it.But it is a little late that the GPS inform me to make a turn...PS: I do't know where can I confirm if my GPS is with lifetime maps....There is no instructions and tags shows that function....", "No company should market a GPS device with Life Time maps that can't support the feature.The consumer should not need to research methods to insure that standard features function properly. In any case, with such limited memory, there is no guarantee that the map download feature will continue working over time with future map update files.", "This XL340M was for my daughter, I am a owner of the tom tom GO 720 also. they function very similar and have the nearly the same functions. The tom Tom xl340M has lane guidance that my GO 720 does mot. but the Go series also can play music. The window mount is different and seems to be an improvement over the go series. the new mount suction cup has a ring that spins and locks the cup to the glass rather than just a press on grip like the old models.", "the spoken directions are nice but they need more voice selections.very pleased with this purchase", "Some of the high end Garmin units feature reasonable voice recognition, but they are expensive and the feature is still, to some extent, a work in progress.9) This unit does not offer blue tooth connectivity to your cell phone, nor FM transmission through your radio system.", "There just isn't enough room to store more than one voice and the pre-loaded maps take up most of the available space out-of-the-box.Finally, and probably the worst thing about this GPS is its touch screen. You have to press really, really, really hard to get it to recognize your presses. This modern GPS feels and responds to your presses as if it is using pre-iPhone technology.", "Having a GPS to give you good directions to places in areas you are not familiar with is a great help. There's nothing worse than getting lost or writing down direction only to find out you wrote them down wrong.With this Tom Tom unit getting lost shouldn't be a problem.It has voice directions to you don't need to constantly be looking at the unit. You can enter GPS coordiantes, addresses or intersections to get directions."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,499
|
I don't have any more Pentax flashes but they have a standardized shoe like Nikon, I'm sure it would work. Sony, maybe not, but Pentax should be fine
|
{"question": "Any problem using this with a Pentax flash???", "document": ["This tool really works. I have a Pentax Af360FGZ flash that fits on it fine. After I screw the tightening mechanism enough to secure my flash shoe (not too tight), then I use the securement latch on my flash to secure it also (as I do on my camera). This device can be mounted on my tripod and my flash stands using the adjustable mounting piece on the bottom.", "I've used this mount bracket for a few months now and it has worked out very well. With a Yongnuo flash and CowboyStudio umbrella in it, it holds whatever position I tighten the screws down on for hours at a time. The only problem that I've had is that the groove mount that the flash sits in is fairly wobbly. I'm not sure why CowboyStudio couldn't have made it all more solid, but it hasn't failed me yet. It's just a little scary every time I let go of the flash.", "And, I did it in a way different from what you might expect. The bracket comes with a round plastic and metal adjustment nut that sits between the hotshoe and bracket. If you screw it onto the bracket all the way and the screw the hotshoe down everything is pretty much tight and lines up pretty well. The problem is the umbrella screw and the hotshoe screw are both on the same side.", "flimsy, seems to need some TLC to hold the flash in place on the light stand.", "Practice with your equipment and ensure that the 500 dollar flash unit is going to be supported with that umbrella and the 20 dollar adapter before you let it alone.", "Ordered product for portrait photography. Product is sturdy and just what I was looking for in an off the camera mount for my external flash unit and umbrella. Great price!", "I have used this a few times and have found no fault in the bracket. It holds the umbrella and flash well, doesn't slip, and seems very well built. Great price too.", "This is a great bracket for umbrella and/or flash I will use it for my off camera flash and like the umbrellas I must wait to get more of these. Probably three or four.", "This is a perfect attachment for an old tripod a friend gave me. I was able to securely attach it to the tripod and then mount my flash on it. All supplied hardware is included for an easy setup and usage. I then purchased an umbrella for some added softness.", "What can I say about this product? It does what it's supposed to! It seems pretty sturdy so far, the threads haven't been stripped, however the hotshoe clamp has fallen off and I can't find it anywhere... it's ok, though I can just use the mounting foot that the flash came with!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,509
|
It is my understanding that it covers everything except loss.
|
{"question": "Does this cover Drops, spills etc?", "document": ["I thought I was buying accidental protection as it says, but when I went back and read the details it seemed clear that this was not what I bought. I contacted the company, and sure enough, it does not cover accidental drops.", "Admittedly, it does say there "Unless Accidental Coverage Benefit is purchased, we don't cover items that are accidentally damaged..." But I have nothing in writing that reassures me that what I paid for is what I will get if my camera is damaged.", "I went ahead and called Assurant 360 for pre-sales questions on a coverage for a camera. The gentlemen knew the majority of the questions I asked so he seemed knowledgeable. My key concerns were for lens errors since this would be a gift and the camera would be used on the beach a lot and grains of sand tend to make its way into the lens gears and cause lens errors. According to this plan it would cover lens errors and of course accidental damage.", "too early to evaluated, this is a service that i expected to not use , rather to have the camera wor properly", "i had it before and lost the camara but I used the insurance plan twice, and the service was fast and I had a new camara within a week", "excellent choice for warranty, I got it electronically and then it came by mail phsicly couldn't be more happy with it", "a security for my camera, really cheap and reliable!just a security, go and get it, nothing more, I think.", "Well, I added this for extra coverage and for "accidents"; however, nothing has happened to my camera yet, but at least I can rest easy knowing it's covered! =)", "We've used this product once and will be returning it. It is a very low quality camera and it takes an innumerable amount of batteries just to keep the camera powered and recording for 1hr! I was very disappointed in this product", "We have not had to use it so far, it is a great value for the money, let's hope that when we do need to use it all goes smooth."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,517
|
Yes. It can play any mini DV tapes (cassettes).
|
{"question": "Will this camera play old mini dv tapes taken with JVC model GR-D72U?", "document": ["My old JVC GR-DVF31 purchased in July 1999 was still generally working well in terms of recording and playing, but the button controlling the play versus record, full auto versus manual, broke off. The power switch also seemed to be deteriorating. It became increasingly difficult to turn the camcorder on and off, to switch between play and record, and repairing the machine was exorbitantly expensive.I decided to invest in this camcorder because I wanted a basic device that uses mini-DV cassettes.", "Good camera for the price. It's much better than the Sharp camcorder I purchased over 6 years ago. At the time that was over $500. So it was an upgrade yet I spent less than $150 on it. One thing to note is quality is very poor in dark setting. Works great for daylight and well-lit settings. I prefer mini-dv tape since I edit in imovie on a Mac. Plus I like having a the tapes as a backup.", "I've only had this product for a few days but so far I love it!! My wonderful wife bought it for me as an early Christmas gift and I'm so pleased! The tilt screen in the back is so cool and really helps create a small profile for this camera. Having the ability to shoot in 16:9 is a fun perk. I definitely recommend the JVC GR-DA30US to anyone who's looking for a small video camera with a ton of great features!", "I bought this refurbished camcorder only to play back older miniDV tapes of our children, so I cannot comment on the recording video quality. The playback is fine on this machine and I hope to copy all the miniDV tapes to our computer soon with it. I bought it solely because one cannot buy just a miniDV player at this price point.", "Camcorder has a very nice picture quality, nevertheless, it doesn't have viewfinder, no microphone. The night shot on JVC in general are suck because it is on slow motion, and it's only good if you record with lights on or daylight. I wasn't very satisfied with this product. I suggest you google the model# since sellers don't show full specs/details. Pointing down thumb on this", "It is very small (MUCH smaller than my old JVC) and takes excellent videos. Some people do not like the joystick control, but I personally find it easy and fun to use. The battery life is good. The display is smaller than my old JVC, but still perfectly satisfactory. Overall I have no complaints and am highly satisfied. Just bear in mind, though, that this is a basic piece of equipment. I was attracted to the price of $200 -- extremely reasonable.", "A great camera for the money. It does what you might expect from a more expensive model. Strongly recommend!", "We had lost our old MiniDV, and this replaced it. Worked great. Easy-to-use camera. Nice size. I recommend it if you are interested in this style.", "I love this camera. I use it for birthdays and holidays. Although, I have had some trouble finding the tapes.", "To whom it may concern:I bought this camera for my husband's birthday. He wanted the camera with the small tapes, so this was a perfect match for him. The camera was in awsome shape, and he loves it.Thank you"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,524
|
Close to 6 foot
|
{"question": "How tall is it?", "document": ["It has got plenty of hooks. It's tall enough for all his coveralls or coats. He couldn't be happier! It's sturdier than you would think.", "the rack works well. is a little too tall for my 7 year old to reach but she will be up there in no time. would recommend glueing the little balls on the ends of the arms. They tend to come off when you take your stuff off. Pretty stable, just have to load it balanced.", "This was really easy to put together and looks great! Very sleek and modern with a tough finish. The base is a little wobbly but a little bending took care of that. The base and upright pole really need 3-4 screws in them to make it more stable but does fine with just the one. We've got 4 winter coats and a few hats on it now and it is standing tall and straight.", "This is a good rack, with lots of pins, good design and can handle lots of heavy clothing.Only issue is that it is very tall, and some of its top most pins are way too high for me to hang a coat onto easily. I am 5 feet 6 inches, and even then i have get on my toes to get to the topmost pins, which becomes irritating early in the morning during winter times, when you want to feel all cozy!", "This product was exactly what I needed - a sturdy coat tree that wouldn't snap like my wooden one did. I bought it for my kids, and while it is far too tall for them, it was easy to leave out the middle section to make it perfectly kid-sized (it would be easy to add that section back in if we needed to use it for grownups). The instructions were easy to follow and assembly was quick and painless. The black finish would match any decor.", "Nothing special. I bought it as a coat rack and it's doing well for that. I wish the pegs had less vertical distance, but I guess that's because it's designed for hats not coats. Assembly was simple. The tall pole uses a rotational keying system, the pegs go through the pole and are attached by the included allen bolts. There is a simple system to prevent the pegs from rotating, but it doesn't do a great job. Make sure that you tighten those down strongly.", "I am absolutely blown away by this product's performance. I have 4 heavy winter coats on it right now and it's standing tall and sturdy. I also have a dog jacket, a woman's hat, and 2 canes, standing on high pile carpet. I can't say enough about how this product impressed me. It took me maybe 5 minutes to put together and I don't excel in this particular area. This is a winner in my opinion.", "yep, for $25.00 bucks, you can't find anything in Target or Walmart. Minimalist instructions on putting it together, but pretty easy to figure out. Not the most stable of coat racks, but for 25 bucks, I shouldn't bitch so much. The coats hang, coat rack is performing it's assinged task.", "very poor materials! do not buy it! It was difficult to collect because of the different sizes and poorly made parts", "this was very cheap, very easy to put together and does exactly what it needs to. if your looking for a simple home or office hanger this is your man!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,530
|
Mine is mounted on a 40 foot mast, and I just grounded my mast not the antenna.
|
{"question": "The connection plate at the bottom of the antenna is suppose to be earth grounded correct?", "document": ["This is my second Imax, first destroy when winch broke on mast, I would have rated this one a five star but antenna connection was not centered at bottom of antenna. It tuned to 10 meters very well, can't seem to get the swr's down on it on eleven meters, but I will buy another one. I know they are good antenna's.", "I believe that there is only a simple wire in the middle section and perhaps the connection (solder job) is not quite perfect...... there may be a problem in the future for me.Worth the bucks?", "I also put one down at the shack.The RF noise choke consists of the RG-8 coax feedline. The normal feedline you use to get the signal into the shack. I left a 6 inch pig tail for the antenna connection and then wrapped 12 turns around a 2 inch piece of PVC pipe about 8 inches long - making a coil around a PVC form secured with black zip ties through holes punched in the PVC pipe. It looks like a big wire wound resistor, but it works!", "Perhaps earth ground, which lowers the SWR, is reducing the antenna efficiency to 60% when I lower it to get a good SWR. I am using EZNEC at this time to explore that.> Contacts. As a new Amateur operator on the HF bands, looking for an inexpensive way to experience a few contests, make some good contacts, learn the protocol, and not offend my neighbors with a big antenna....this antenna is working for me.", "This mount is not grounded by a ground wire. It is mounted to the tripod with a 8 ft. piece of pipe and I ordered and installed the Solarcon radial kit. No other radial or ground counterpoise was installed. The roof has normal composition shingles. The antenna is about 18 ft. above ground level.I am using a very old 100' run of RG8 coax dating back to the early 1980's with silver plated Amphenol connectors. It is old but in good condition.", "I assembled the antenna in about ten miuntes,and have it installed on a 10 foot mast.", "If your into skip like im not then this antenna will do the job. seems to work pretty good barefoot.", "I am enjoying this antenna on 10 meters and it seems to be working well. It has met my needs.", "A friend had this antenna and recomended it & he was right, plus it's made it's very sturday for the high wind at my place.", "Just not sure how long this "Flimsy" Antenna will last. Working on the second one ! Guy wired & all"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,553
|
no, it leaves all of the ports accessible. As far as protecting your mac if you dropped it? Don't know about that, and not looking to find out...but I would guess it offers more protection then no case at all! When I travel, I also put it in a neoprene sleeve for extra protection.
|
{"question": "Does this case cover and of the ports or microphone slot? Plus, say I dropped my mac from a few feet, would this offer any protection??", "document": ["This cover covers the second microphone on the left-hand side of the computer. I bought it because there was a video review that showed the bottom half having a hole for the second microphone, but there is not.On the plus side, the teal color is very nice (not as bright as it looks in the picture), and it does provide some protection for the computer.", "It does fit well, and I like the feet, but I'm certainly not blown away by this case in any way.....The fingerprints drive me crazy because it looks like crap, and makes me think that maybe a simple neoprene sleeve would be a better option, though at least this case does offer some protection while you're using it....", "And had to pay return shipping everytime it cracked to get a new one. Not cool! Needless to say, we shall see how this holds up, but already it feels stronger, whereas said brand case usually had a crack within an hour of use and I take VERY good care of my case.Did I mention the Tiffany blue color is really cute? The apple shows through in a nice glow. I really like it so far and the little feet on the bottom are a plus.", "I bought this product instead of the more expensive Speck case because of the cheaper price and decent Amazon reviews. However, after 6 months, I'm sorely disappointed in this product and just ordered a Speck. This case has cracked in at least 4 places (top right, near the USB slot, bottom right and near the power slot. Plus, a lot of dirt/dust manages to get trapped inside the cover anyway, and it is incredibly difficult to remove in order to clean the computer.", "The fit isn't perfect but well enough that it doesn't fall off. The Bottom riser nubs are all ready coming unglued and the nice black rubberized paint has scratched off. It does offer scratch protection throughout the laptop but sadly I don't think the case would keep up with an active user.", "It doesn't ever get dropped or handled roughly or carried haphazardly as I'm very careful with my equipment. Not sure how that happened. It's just a matter of time until a small plastic shard dislodges itself and embeds itself into my rug for me to step on. Looks like a piece has already come off. I will say the Speck cases I've had held up forever. This plastic isn't the best, but for the price, I would still buy again.", "The pictures are a little deceiving- one pic clearly shows there is no apple cut out... but the other pic shows a glowing white apple on the top cover. The reality is that there is no apple cut out. The glowing apple will glow through in a light blue-- it is glowing through the blue case. Overall, I think it will offer decent protection from scratches and scuffs.", "I read a lot of reviews saying that this case was difficult to put on the computer--I'm not sure why anyone would have a problem. It is quite obvious which piece goes on the bottom and which goes on the top, and the pieces just snap into place! This case fits tightly enough to prevent particles from slipping between the case and the computer. It's also nice to have protection from scratches to the computer and minor drops. Plus, the mint green color is very nice!", "I received this hard case cover fr Amazon Ina short time and in good condition. It was packed real well. The cover was in two pieces. One for the front and one piece for the back. Each item went on with little effort and with a good snug fit. You donor have to worry. About it. coming off when using your lap top. They can be taken off with effort and go back on really good. They offer god protection. The color (black) looks good.", "I bought this along with the Kuzy - ULTRA Thin CLEAR Keyboard Cover Soft TPU Skin, and couldn't be more pleased. The fit of this case is perfect for my MacBook. It provides protection from scratches, which is what I was searching for, the texture prevents slipping around on tabletops, and it's so lightweight you don't notice it's there. Plus, the color is a great sky blue, and I like that I can still see the Apple logo through the case."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,577
|
I believe this would be the price for one glass.
|
{"question": "is this for one glass or a pair?", "document": ["Some guy told me mixing grape KoolAid and LouisXIII was delicious. What a liar! This glass is fantastic, expect when you drop it! It doesn't tumble it shatters! I had to layoff off one of my groundskeepers for one week just to pay for it. But when you put your hands on this thing you can't let go. Good thing I found one used, or I would have to drink my whiskey from the Holy Grail!", "My father had bought a set of these tumblers in France, then saw them disappear one by one. So for each Xmas and birthday for several years, I ordered him one of these, hoping to provide a full new set. Soon after he died, the missing tumblers were found in a cupboard where he'd stashed and then forgotten about them. Hence, tumblers enough for a good-size and very classy cocktail party.", "Purchased as gift. Arrived quickly and without damage. Baccarat red presentation box protects and displays tumbler perfectly!! Makes wonderful gift.", "I won't say much about these glasses, since I'd rather be drinking out of them than writing about them. But there's something magical about these glasses, as strange as that is to say. They have an amazing feel in your hand: great construction an this very nice .... balance? weight? I'm not sure how to say it, but the way that it feels when you drink out of it is like moving a pendulum.", "As excrpted. Shipped and packed nicely. Would buy again. X x x x x x x x x x x x"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,584
|
It comes with a standard size bracket for mounting in a desktop case.
|
{"question": "Does it come with brackets.", "document": ["Excellent video card however it is advertise as low profile and it does not come with the brackets to install it. You have to buy low separate profile brackets thats the reason for my 3 stars.", "Installed in to my HTPC and used the low-profile bracket from the previous card on it. (it doesn't come with one)It's a modern Nvidia product. Supports all of the latest features in the NVIDIA driver and is plenty fast for HTPC needs. I use Steam In-Home Streaming to it and am playing all the AAA games at decent speeds streamed from my gaming rig. It can play most AAA games smoothly at near XBOX/PS3 settings.", "package arrived on the scheduled day and thanks to reliable distributors and a little pc know how it was installed and i was gaming within the hour of opening said package", "With the GT630 GPU it is all silky smooth, with the GPU never above 50% utilization. I recommend this card for use in mediacenter PCs. I am quite happy with it!", "This graphics card delivers excellent performance for the price. It is not targeted at gaming, look elsewhere if that is your need. Plenty of GPU power for photo and video applications that can utilize the GPU. Low power fanless design makes for a quiet system. The 2GB of onboard video memory is plenty for running Windows guests in virtual machines, which can use considerable graphics memory. The card has a gen 2 PCIe x8 interface, half of what is the norm for a graphics card.", "This card, which I bought for $64, is replacing an Nvidia 8400 1GB series, which I'd been using for 4 years or so.", "The variable fan power supply and this new fanless graphics card cooled by a large lowspeed case fan makes for a quiet system. I could imagine running this with a stock power supply, however I have a 300+watt. No driver problems with windows. For the price this is one of my favorite graphics card purchases in years.", "The price difference after rebate was only about $20. Benchmarking with FurMark v1.13 (1366x768, 2x Anti-Aliasing) the integrated Intel graphics scored 24 points with a 0 FPS average, the XFX HD 6450 scored 100 points with a 1 FPS average, and the Asus GT 630 scored 412 points with a 6 FPS average. I am now able to play Gone Home at maximum settings with no stuttering or lag, and even 2D games are noticeably snappier.", "The mesage "3D_Enable.exe stopped working" came out twice. There was no apparent negative consequences but the messages persisted. ASUS support provided a link to the correct Version of GPUTweak for Vista ( 2.3.8 ) as the installation process had loaded the version for Windows 7 and XP.", "The GT630 is half as fast as the R7. The fastest of the 10 "budget cards" is the Radeon HD 7770.Otherwise, this card comes with nice GPU Tweak software and otherwise runs fine on my dual monitor setup with high resolution.Bottom line: do your homework, for any gaming you need to spend at least 100 dollars, any serious gaming a lot more."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,600
|
No
|
{"question": "Does it have a quick release plate? Thanks.", "document": ["Feels solid, doesn't feels cheap, works great. Pieces are anodized, which is great. You should look for the one with the quick release options though.", "All of the screws hold tight.Rails are solid.Attached to my tripod with QR Plate to swap to my Steadicam rig as well.Good stuff and very cheap.", "Solid build. Works great. Having two bolt points for the plate really helps keep your camera from turning like most others I have tried.", "Excellent machining and construction. The plate looks sized primarily for DSLRs, but this is stable with larger cameras as well, I use it with my Canon XF-300, and will order extensions so I can get a bit farther in front of the lens on that camera. Amazing for the money!", "I ordered this looking for a Red Rock alternative and was pleasantly surprised with the build quality. Fit and finish are good and the knobs are aluminum and not cheap plastic.I would recommend ordering this with the quick releases. All-in-all, for the price of Red Rock and others like this, you could buy 3 or 4 of these.", "nitpicking):-There was some metal powder (from finishing I'm guessing) in an unused threaded hole-Some of the logos aren't put on perfectly-There's a slight dent in one of the knobs (only cosmetic and hardly noticeable)-Chromed parts seem cheap (bolts connected to the knobs, camera thread bolt)I really had to search for things to complain about with this, and that's why I'm giving it five stars, because it exceeded my expectations.", "This rail system works great, feels solid, got the job done for far less than most alternatives. I recommend it.", "This rail system came packaged securely and appropriately.Item appears solid and durable. If you are looking for a rail system this is one to consider. Great price. Good quality. I will attempt to update review as I begin to use this item.", "This product also works well for video camera form factors even though the title only mentions DSLRs. Makes using cine lenses a dream with a follow focus.", "This one is a little lower profile that works better with my DSLR rig , its metal and well built a good buy"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,629
|
No, I don't think it supports TPM (I don't see the Header)Image of Sabertooth 990FX R2.0http://www.overclockers.ru/images/lab/2012/11/03/1/14_1_big.jpgSee next to TB_Header. (next to USBs 2.0 headers and green led)Image of Sabertooth Z77http://www.overclockers.ru/images/lab/2012/05/23/1/10_big.jpgNo headers
|
{"question": "Are there TPM headers on the ASUS Sabertooth Z77?", "document": ["The TPM module allows you to encrypt your hard drive using Windows 8 Bitlocker. Only the latest ASUS motherboards have a TPM connector such as the ASUS Sabertooth 990FX R2.0. Amazon is one of the few places that carry it and it is at a reasonable price.", "It's a TPM for an ASUS motherboard. It works on my M5A99FX perfectly. It is compatible with Windows 7 and Bitlocker. It does exactly what it is supposed to.5 stars because it works.", "Pros: Installation of H/W a snap.Cons: Installation of S/W very confusing. I'm still not sure if it's installed correctly. Seller support terrible. They just sent me the URL to ASUS, which provides no help. There is detailed instructions, but is very complicated and assumes in depth knowledge of TPM theory and operation (buzz words throughout).", "I ordered this module for my Asus Sabertooth 990FX R2.0 Gaming Board and hope it will protect my private Data. The C: Drive is being BitLocked and this will take a while.", "Works great on my ASUS X79-Deluxe motherboard.", "Works hand in hand with Windows BitLocker and other encryption applications. Suitable for high-security systems.. I've bought one for each ASUS MB which supports it.", "It was very easy to install and set up with Windows 8.1 on ASUS P8Z77-M motherboard. I encrypted hard drives with BitLocker without problem. I'm very satisfied on this product.", "I bought it on a lark as I got a new ASUS Maximus V Formula board with a slot for one. I installed it, set it up in the BIOS and it works. Shows up in Windows 8 Pro, worked to set up Bitlocker. So far so good.", "If you have Windows 7 Ultimate with \"Bit locker\" then this product fits the bill with its own version of setup software on a CD! I Successfully used it on two different Motherboards: the ASUS original 5 Year Warranty SABERTOOTH and the Gigabyte GA-990FXA-UD3, both worked fine with the original setup software from the included CD.", "Product works as expected on an ASUS P8Z77-V mobo once enabled within BIOS. In conjunction with Windows 8.1 I had zero issues with the setup and implementation of security. I have dropped one star because the included software was dreadful. I found it overly confusing and would not install it if I were to purchase this product again."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,636
|
That is not a good idea to plugged in 24/7.
|
{"question": "Is it ok to leave the converter/transformer plugged in 24/7", "document": ["Bought this converter and believed it would work fine, plugged it in and sparked my Plug out with smoke.I did not even plug any items into yet. Gave a refund straight away. But very disaponted.", "The converter worked pretty well in India. I plugged in aBelkin 6 Outlet Home/Office Surge Protectorto the converter and charged multiple electronics like laptop, phone charger, camera battery charger, portable dvd player etc. Recommended!", "I bought two and brought them to Australia. Had to buy a converter to use Australian outlets. Then one never even had the red light come on ... The other? The light is ALL that works - 110-volt appliances plugged into it do not work. I have to wonder about the positive comments - Employees or owners of the company?", "I carried this heavy stuff with me on a business trip to China because I have a breast pump machine needs it.Turned it out it never worked! it triggered as long as i plugged it in and put me in a very awkward situation. I have to go to buy a manual pump in China.I did not bring this converter back to U.S since it is just a piece of crap and as heavy as a rock. I contacted them once I came back from China.", "Anyway, I keep the transformer for the first two items, and just purchased some new US plugged hairs straighteners.", "I plugged it into the wall, then it popped immediately followed by smoke coming out of the unit. This transformer never worked for a second!Amazon should remove this product and maker from its site completely.", "This Transformer couldn't power a watch. We plugged it into the wall and it blew the fuse. We changes the extra fuse it came with and then a tone of smoke came out of it. Total junk.Make Your Day Great!! !Scientific Asset Management", "with this transformer converter my Ipad charges fastly, it is the same disciribtion i had read in the advertisment, so thanks amazon for your honest.", "I tried this AC Voltage Transformer Converter with a ac an a little drill but every time it would blow a fuzz.", "I have this for almost 3 years now, it never failed me and it is working great. I use it occasionally to use small electronics I brought with me to the US from over seas. This is a 100 watt converter, so do not expect it to work with electronics which operate on more than that. The reason I'm writing the review now because I need another transformer and I'm thinking of buying the same brand."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,638
|
You can order a little Bluetooth adapter here on Amazon for about $16.
|
{"question": "Some reviewers say that this product supports bluetooth. But the Bose website says it does not. Can someone clarify this?", "document": ["It has a clean sound and particularly a distinct non-muddy base. However my some has a Logitech unit which costs about half. While the bose is certainly cleaner sounding with distinct midrange I can say it's worth more than twice the price of the Logitech. Especially because the Logitech can be purchased with a Bluetooth option for about $10 more than the plug in version.", "The service manual says this thing consumes 36 Watts Maximum. So at full distorting volume it only is taking 36W from your wall socket. Add the iPod charging, other components (DSP board gets pretty toasty), the fact that the IC isn't 100% efficient, and you get less than 18W per channel at full. I'm guessing 8-10W per channel. I don't have an oscilloscope to check the wattage (service manual doesn't say), so we at least know it is well under 18WPC.", "Great product it's Bose and its the best love it ! Don't forget to get the Bluetooth jack to make it even better", "After testing several different brands and models at a local Best Buy, I purchased a \"renewed\" SoundDock Series III (Lightning connection) from a Bose outlet store. Saved $50, and the product carries a full warranty from Bose. Small footprint allows it to fit just about anywhere. Unlike what other reviewers have said, the dock itself is built into the unit, and is very sturdy (although I think the other reviews were talking about the SoundDock Series II, the 30-pin model).", "It has a small footprint but delivers. Rated 4 stars 'cause nothing is perfect. This is my first Bose product...I can only say WOW!! !", "great product , great sound and for all the people who say its over priced , i guess your not willing to pay for the quality of of the sound , no regrets , i know in the future i will be with bose again", "What else could I say but anything Bose is just going to be the best!Works wonderfully thus far... Amazing product.. Makes life soo much easier and musical... :)", "I have found this to be disapointing. the Bose sounds much better in the Bose showroom but sounds very ordinary at home. It works ok but I cant say I would recommend it and it certainly does not sound like a top of the line product. I am not getting that rich, fill the room sound they rave about. The construction is light and poor quality. The bottom part wiggles and is not securely attached.", "I really like this product and paid $212 at the factory outlet. I'm definately not an expert, however the sound on this unit is great for the size. The reason I say I really like this unit is because prior to owning this I very recently bought the sony s airplay. That is a good sounding unit that is very versatile however, I begged my sister to buy the bose for my birthday after hearing it in the factory outlet store. The sony unit does not get loud enough.", "It is awesome, small and compact, but great sound. The battery life is great. The bluetooth has quite a good range. I would definitely buy this product again!"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,644
|
They are engraved with the measurements in standard and the metric equivalent.
|
{"question": "Are the measurements on these spoons engraved on them or spray painted?", "document": ["These are just the measuring spoons that I wanted. they tell me all the different measurements plus a dash, and a pinch", "Good quality, range on measurements from Tbsp to smidge and space saving functional set of measuring spoons. Nice addition to a kitchen.", "This measuring spoon set for exceeds my expectations. These spoons have measurements such as pinch, smidgen, dash. The quality is very nice. well worth the money spent.", "It has been helpful to have measuring spoons that measure those smaller measurements recipes sometimes call for. I would recommend this item to anyone who loves to cook. Thank you.", "I ordered these top have an extra set. Nice variety of measurements. Met my expectations. If you use old recipes it is nice to have the non standard spoons", "These measuring spoons are fantastic quality-very heavy duty. I use them almost daily. Having to cook gluten free, some of the baking calls for teeny tiny measurements and these are perfect for the job.", "Heavy and handy spoons include the smaller measurements down to pinch and dash. I needed the 1/8 tsp and was glad not to have to pay an arm and a leg for such a nice sturdy stainless set.", "These are the best looking and functioning measurins spoons i've every owned. I will be purchasing the larger size as well. The unique cup or scoop shape makes leveling off measurements a breeze. They are sturdy also, not flimsy soda can metal. These are great and the quality is great. I would recommend these.", "As soon as you pick these measuring spoons up, you sense the quality of workmanship. They are shaped to access nearly any shape/sized container and that is critical to me as a baker. The range of sizes is great and I appreciate the way they are held together. The size of the spoon is embossed into the handle in both metric/imperial measurements also. Good value.", "These spoons are great, accurate, sturdy, and non-reactive, which is important. I love having \"dash,\" \"pinch,\" and \"smidgen\" measures, as even in the culinary school world, recipes ask for these measurements. Now all I need is a \"to taste\" measure, haha.I would recommend these spoons to anyone, and Norpro is a high quality manufacturer."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,679
|
I don't believe it is an actual chrome plated finish. I think it is stainless steel polished to a shinny bright silver finish. Which makes it VERY durable. While giving it the appearance of chrome. Chrome was used in the 50s and 60s as a plating to protect the metal underneath. Chrome is hard and resists rust better than steel. But chrome can/will rust. Stainless steel has Chromium in it, but is much more resistant to rust.
|
{"question": "Is the Chrome Finish?", "document": ["This towel warmer works perfectly and I think it's a great product. Towels are nice and warm. The aesthetic is simple and modern. We ordered the Pearl 10 bar \"bright stainless\" which is a chrome finish. Our bathroom is about 5' x 8' with a standard 8' ceiling. It actually warms the whole bathroom if the door is kept closed. Be careful - those horizontal bars become very hot to the touch!", "We liked our 8-bar Myson Pearl towel warmer, although it got \"Warm\" enough to damage towels after a few months of hanging in the same place. Unfortunately, it promptly stopped heating when the two-year warranty period expired.", "We had it on a timer, so we very rarely ever used the switch over the past year - doesn't seem like a switch should go out so soon especially when it didn't even get much use. Now I can't flip the switch to the 'on' position, so not even the timer can control it for us now.Contacted Wayfair, the seller, through Amazon and they responded immediately that they would ship a new one. It indeed arrived about a week later. Excellent, excellent customer service.", "We are wondering how we ever lived without a towel warmer.We are energy conscious, so we put it on a timer. It comes on 2 hours before we get up during the week, and goes off 1 hour after we would normally be done showering on weekends. Our towels are always nice and warm.Once I finally got power to an outlet where I wanted the rack, actual installation of the rack is a 5 minute project.", "Very disappointed...Didn't work. Should've known the way it arrived...box crushed. Had a note inside from a previous buyer who also returned it, saying this product was a piece of junk! Returned it for refund :(", "Used an double old-work box one side for the timer and other side for the outlet connected to the timer then I just plugged the warmer into the outlet. Looks sweet and works great, would recommend to anyone interested in a little extra heat in a cold bathroom or doing less laundry due to smells on the towels", "This is the third towel warmer we've owned and although we love the looks of this one, the fact that it is so hot is definitely a minus. This is the only reason why I gave it 4 stars. We had to go out and spend $15 on a timer that would accommodate the plug. This is the way to control the time the heat is on so as not to scorch the towels!", "The only way to make a towel HOT \"through and through\" is with (penetrating) steam. So the heating elements make the towel warm and dry it out in an hour or two, beyond that you are \"wasting\" energy. The heating rungs get pretty warm uncovered in free air - but not hot enough to burn my hands so long as I don't squeeze and hold on. *HOWEVER* towel(s) hung over the rungs trap a LOT of heat IN!", "The four mounting stand-offs are also polished steel tubing and are the same diameter as the side rails. Thus the mounts match the unit perfectly.. It feels very solid and \"heavy\" as I hold it in my hands. Also has a nice, heavy duty, flexible white rubber, spiral/springy power cord. Even as a \"non-heated\" rack it is very stylish and attractive. Compliments my bathroom décor PERFECTLY.", "The Myson 10 rail Pearl unit is 180 watts - that's THREE times the power! Being an EE; helped me recognize this and adjust my use accordingly. I recommend you do the same. You'll save energy, extend the life of your unit, and be kinder to your towels. Thus as a point of reference, I wouldn't leave it on for more than four hours at a time."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,696
|
Honestly it seems like every time you use it the filter gathers dust and you just wipe it off with your hand *Think lint brush here*.As soon as it's clean you're done. in terms of replacing it. Hmmm who knows...seems like it should hold up for quite a long time. If not you can replace it for like $5 on their website or make your own.
|
{"question": "for how long or how many times should it be used without changing the filter and how to change it ?", "document": ["I had always used compressed air cans to clean out my computers. They didn't last all that long, weren't all that powerful and couldn't be continuously used without losing what little pressure they had. I then tried an actual vacuum (produced by the same company actually, Datavac) but it wasn't very efficient at getting in all the places I wanted it to. It was also a pain in the neck to have to constantly change the attachments to get different spots cleaned.", "Not a vac, but a pint-sized (or maybe a little larger) blower. Perfect for blowing out computer cases. I've already said it too many times to my friends - but it is one of the best purchases I've made in a long time. No complaints at all! I even have used it to blow out the filters on my air purifier. No more cans of air - no more hassles. Great stuff!", "Although it has uses, canned air just doesn't last very long.I've helped some friends out with computer issues, and many times I think the initial cause was just dirt covering everything in the case! Components overheat and/or short out in a dirty environment. This blower is small, very portable, and very powerful. I wish I had it sooner. And yes, if you don't want a bigger mess, blow the case out outside...", "Not to be used in a quiet room, except with a extention hose kit.But very very powerful.Fast delivery, Thanks many times.", "This blower completely blows them away. (lol) It really is like a mini leaf blower, can move a serious amount of air in a large or concentrated area depending on what your need is. Had for a little over a month and used it multiple times. Foam filter at bottom is great for catching dust. One thing not noted in manual tho... the filter you just kinda squeeze and pull out to clean and put back in but it does not explain this.", "This has been a very useful device! I dust our ~10 computers every few months, and that used to take a lot of Dust-It™ cans (all that propellant, all those empty cans into landfill, or even to recycling). By now (after couple of years of use) this unit has paid itself back many times over.", "Very powerful (loud) but so many usesObviously cleaned my PC with ease but i've also used it for:-Cleaning my Dyson style Shark Vacuum and filters-Blowing out debris from behind/under areas like refrigerator that i didn't feel like moving-Strong enough to blow the leaves off my front porch when i didn't want to get out the big blowerLong cord lets you wander a bit and great assortment of attachments for different jobsNever buying canned air (dust off) againLoud but can still use indoors without issue", "This thing is great. I do many iPhone/iPad repairs and used to buy the cans of compressed air to ensure that "No Dust" was on the screen before sealing the unit up. This DataVac has a filter to ensure the air used to clean is free of debris. The cost of the compressed air cans used in a few months is much higher than the price for this datavac. Very glad I bought this item.", "This device is a bit loud, but it is quite powerful and can be used to clean the inside of computers very well. As someone who does regular cleaning of PCs (several times per month) I was tired of constantly buying canned air to do the job. The power cord on this duster is long enough to give one plenty of room to work with and the force of air expelled is great for dusting components.", "There are different attachments that come with it and are precise for the jobs you need to do. The casing is heavy duty, not cheap, thin metal.There's a 5 year warranty on the motor. ( Imagine that! ) The filter is easily accessible to change out.It has a nice heft to it but it's not heavy or clumsy to use. And i got it super fast. And no i don't work for the company."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,728
|
Well this is a full spectrum camera so you would need to block all visible light with a ir filter unless ur in a location that is pitch black, but this camera has a fixed focal length and no optical zoom just digital, so I would not recommend this cam for anything that may be at a distance, maybe the Bell and Howell DNV16HDZ-BKFull 1080p HD 16MP Infrared Night might be better..... it has 10x optical zoom but is a ir cam not full spectrum. Both would need ir filter tho if u want to capture pure ir image only with no visible light. The bell uses 37mm filter this one is a 34mm.
|
{"question": "I want to film UFOs in daytime sun filled light. Can I do this with your camera? Do I need to install an infrared filter like 700-1000 nm? suggest?", "document": ["The battery life is only about an hour long. It costs about $60 for an additional battery. The infrared/full spectrum will need additional light as it is not that strong to light a room up. Also wished the camera could be plugged into outlet versus using the battery to avoid having to stop recording to switch out battery. Overall good little handheld and I like I can use for everyday use.", "Even on the most expensive model cameras, night vision is missing or is so bad you dont want to use it. The camera itself is already a great one for regular use however the infrared is ABSOLUTELY AWESOME!! The only 2 issues I have is the on-screen menu is a little tough to navigate but once you have your setting right, you wont need to use it that much.", "Now if you are looking to buy a ghost hunting camcorder this one works like a dream i cannot belive what i was seeing this will light up a dark room but you do need additional lighting to light up a larger room the service was great and answered all my questions the camera was packed very well and got it 3 days after i ordered it .", "It is versatile, it is loaded with features all paranormal groups want and need, the quality seems above average so far, and the price is right. The camcorder worked flawlessly and produced top quality video and stills in IR and Full Spectrum. The 80 foot IR Flood Light worked great and illuminated large rooms with no problem what so ever. At this time I have to highly recommend this unit for any paranormal group looking to upgrade or expand their equipment roster.", "Easy to switch from record to camera mode and I like that you can take 3 photos while in record mode per record. Screws easily to a tripod. Camera came with battery and battery charger(Camcorder does not have external port for charging). Suggest you buy an addition batery(s) and memory cards.", "I love the IR and full spectrum, and when you turn it off it goes to regular settings. You don't have to just use it for Ghost hunting, which makes it even more of a value.Small and compact, but I would suggest buying 2 extra battries as you will need them.", "But just like the old Sony Night Shots you can manually remove the IR filter for IR video recording, and you can go one step farther and remove the Full Spectrum filter for total Full Spectrum video recording. It is done via the menu as opposed to having a physical switch like the old Sony models. It also features a built in IR light which is good enough to illuminate a small room such as a powder room or similar 10 X 10 or smaller room.", "The camera is amazing you need to buy an external light though but other wise a perfect camera a great buy", "This is a great ghost hunting camera. It records small rooms perfectly. You do need another light for further distances , as with most cameras.", "The camcorder is a little smaller in real life that what it looks like in the photo. It is light and compact. Its easy to carry around even with the accessory bracket and IR Flood Light attached. We used the Full Spectrum mode, and did a few video sessions, and snapped off a few photos while recording video then switched to camera only mode and fired off a few dozen still photos. Using the camera feature was super easy and I liked this feature a lot."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,736
|
The DC17 is an older model which Dyson no longer sells direct but is still available online and in some stores. The DC28 replaced it and is the newest non-ball animal model. The biggest difference between them is weight and suction: the DC17 weighs 33 pounds versus 20.61 pounds for the DC28, and 24 pounds for the ball DC25. The DC28 has more suction: 245 air watts versus 220 air watts for both the DC17 and the DC25. I don't have either model: I have the older DC14 Dyson Animal which, after 6 years, still has amazing suction (it has the 5/8 gallon bin). In comparing the DC25 Animal ball to the DC28 Animal, the big difference (beyond the ball technology which gives the DC25 more maneuverability) is the size of the gallon bin: DC25 has 1/3 gallon bin versus the DC28's larger 5/8 gallon bin, so you will be emptying the DC25 more frequently, which could be a pain if you have long haired cats or dogs which shed frequently; so that's the trade-off, also there is a price difference although Amazon has good discounts on both models. My DC14 does clog but it can be easily cleaned by taking the canister off completely (it comes off with the push of a button), and wiping it down with a damp paper towel or sponge. If you can't get all the small holes unclogged doing that, you can use the end of a paper clip or tiny screwdriver to stick in the holes and push out any remaining debris. It is a bit annoying to have to do only because Dyson advertises that you never need to do this. I also rinse out the bin from time to time (they provide instructions for doing this). Hope this helps in making a decision which model to buy.
|
{"question": "Buy the DC17 or DC25 I'm interested in buying a Dyson Animal, but I can't decide between these two. I see the DC17 has a lot of complaints about broken belts and clogs. But the DC25 only has 9 reviews. Can anyone help me out?", "document": ["What a great vacuum! After reading all of the reviews and trying to decide which Dyson vacuum to buy, the DC17, DC23 or DC25 we went with the DC25 Animal. ( We have 2 cats, so the animal promised a better job with the attachment for furniture and pet beds. It has a rotating brush in the attachment head.) We were very hesitant to purchase the DC25 because it had some negative reviews about suction and the size of the dirt holding tank.", "I've used the DC25 Animal for a couple of weeks now. Before purchasing, I read the reviews here, the negative ones especially carefully.Regarding the broken belt reports, those just have to be false. There are no belts in this design; the beater bar is direct-drive and conveniently switchable.The integrated handle and extension wand do seem odd at first, but they really become very easy to use after doing it a time or two.", "I haven't provided many product reviews, but thought that I should with the Dyson DC25 Animal. My wife and I have a Newfoundland dog, those who know the breed know that dog hair and dog slobber are fashion accessories in our house. The DC25 can't help with the slobber, but it does a terrific job in cleaning up the hair.", "First of all, the Dyson reviews as anyone can see are stellar. Next, reading about Hoover Wind Tunnels as well, it seems my experience with them matched others; great the first year, then down hill from there on with lots of repairs. Still, $550 for a Vac, that's crazy. Or is it? Well with a 5 warranty, great reviews and some long saved Amazon points from my credit card use, I decided to go with the DC25 Animal.", "Newf owners will concur that these dogs have a talent for holding down the floor.Other reviews have mentioned that the cord is too short and the canister too small, we see these two as minor inconveniences. For the main floor of our house (2,000 sq ft) we need to use three outlets to reach everywhere with the DC25. When we need to move the plug to cover the next area, the cansiter is also dumped, so these complaints are not a big concern for us.", "I don't generally write reviews but I found that some of the reviews misled me in one way or another. Hopefully, this will help those considering buying this type of vacuum.Empty Canister as Suggested:As most have stated, this vacuum has a lot of suction (more than any other vacuum that I've ever used) and the suction doesn't drop off as the vacuum fills.", "I had a really nice Kirby sweeper but needed a bagless sweeper because of the addition of 2 inside dogs. The Kirby was awesome but replacing the bags was getting way out of hand. Much too expensive to keep the Kirby. I read a lot of reviews on the Dyson on different websites and came across the Animal Dyson on Amazon.com which was a $140.00 cheaper than buying it locally. Most of the reviews were excellent and a few really worried me.", "There are vacuum repairs shops everywhere some quaintly called vacuum hospitals. So there are 2 very expensive Hoovers in my garage with broken belts or some simple thing Hoover insists on making it impossible to easily remedy and the other 2 given away. I am too cheap to give away the very expensive Hoovers and too stubborn to take them to a repair shop. Between buying the Hoovers, I researched and purchased 2 Dirt Devils each more expensive than the other.", "I've now had my Dyson DC25 Animal for 4 years. Two things have broken on it in those 4 years (plastic clippy/hose things). I am only 100lbs and not a heavy handed person, so I feel that it's a bit much that 2 things have broken in that time.", "I've had my dyson 25 animal ball for about two weeks now and wow....this is the best sweeper I have ever owned. I know I've read reviews before that have said this...but if you're sitting there wondering if you should spend all that money...do it!! I was just like you...buying sweepers that were about half this much, bags, bagless, hoping to find a good one but always being disappointed. This sweeper delivers."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,756
|
i use it in the skincare room in a beauty salon, we load the towels wet in warm water and they are usually ready and steaming hot in about 20 mins, depending on how many towels you put in there. i have had this towel warmer for almost a year, some rust stains on the rack but still works great. i would recommend to purchase it .
|
{"question": "How long does it take to heat towels?", "document": ["Consider adding instructions for how to handle towels. Do you wet them? How wet should they be? How long does it take to warm them? How many towels can you put in the warmer. I followed up on youtube", "Item arrived quickly and just as pictured. Depending on towel size it can hold about 8-10. Does not take long to warm towels. Great price for the product and fast free shipping.", "Towel warmer is in great shape! its a great size and keeps the towels a perfect hot temperature. It does take a little while to heat up, maybe 30 minutes, so just plan accordingly. It holds 8 towels very comfortably for me, doesn't take up to much room, and I Love that is has the UV light for sanitation as well!", "There is no gasket seal around the door, you can see the UV light when the door is closed. Takes hours to heat 4 small hand towels. I did like the option of having either heat, UV or both. Too bad the design is faulted.", "Totally what I expected. I really like that it's the 2 in 1, and that the UV light is only on when the door is closed (when you switch on the UV option). The heating element works perfectly to heat my towels to the right temperature. I would recommend this to other customers.", "This cabi is perfect for a part-time massage therapist or nail tech that will be servicing about 4-5 clients a day. Cabi can hold up to 10 hand towels, but most importantly, can hold heat really well, in such little timing. I would highly recommend this towel warmer,especially because of the price.", "This is a great product in full functional condition. The warming process does not take much time and the effect is great. What a worthy purchase from Amazon!", "great; used it all the time for head massages and conditioners or anything that needs a little heat to process as well. AH", "Very excited to have received unit so quickly, seems to heat up quickly. Very disappointed that UV light does not work. As I look over other reviews this is mentioned several times.", "Delivery was perfect. Takes a looooooong time to heat up! And the the color was not as stated so it stands out like sore thumb in the clinic....everything else is sterile WHITE & this came in a strange cream color. No customer service reply when I called."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,759
|
18 1/2" x 11 1/2" Including handles on each end
|
{"question": "What is the total size of the griddle after assembling the handles? Thanks.", "document": ["I bought this griddle for our family (six people). I love it because it's a great size. I can cook a whole pack of bacon at once or it or I can fry 12 eggs on it at once. The handles are easy to remove for cleaning and storage. I did notice there are a few hot spots on it but I think I just need to use it more and get used to it. I'm very happy with my purchase.", "I had a Toastmaster griddle for more than ten years and it was time to replace it. I wish I had gotten that brand again, but I tried this Presto instead. My old one had handles on each end that I really miss. I am pleased with how this one warms up and how it cooks pancakes. The non-stick is good, too.", "this item was shipped with a set of farberware 17 piece tool and gadget set, the griddle arrived in perfect condition but the Farberware Classic 17-Piece Tool and Gadget Set had broken pieces, it looks like the box the set was in came open and pieces were all inside the box. and three of the measuring spoons had their handles broken off, one of the measuring cups had it's handle broken off, and one of the large spoons was cracked.", "I started with the 350 and it is just right. If it gets a bit too hot even at 350 I can turn the dial down just a tiny bit and it adjusts really fast. I've used it about 4 or 5 times so far and have no complaints except to be careful about spilling batter between the griddle and the handles. It is hard to clean in that little space and this is not the model with removable handles. Let it completely cool off before washing with a soft sponge and mild detergent.", "Just replaced an old Presto griddle that provided many a pancake breakfast over the past twenty years. The teflon surface had deteriorated but it still worked well. Moving to a new home, my wife wanted a newer looking griddle to use in our kitchen. I was debating which Pesto model to order, this one or the less expensive one. I ordered this model and could not be happier. The handles detach for easy storage in a tight space, it's lightweight and easy to clean.", "Once I found the perfect recipe to make beautiful golden, light, high-rise pancakes, I knew I needed an electric griddle that would accommodate large 5\"-6\" pancakes. This Presto handles the golden part just fine, but it's not big enough to handle more than two IHOP-sized pancakes at a time. So I've opted to order a second one, which will add to my griddle real estate, and produce the golden tan pancakes that I've come to love.", "Definitely a great product! Thanks for it, I can enjoy the korean BBQ with friends and family at home whenever we are ready.", "This grill is GREAT! I am all about a \"Quick clean up\".....Which means: I can cook everything on this grill......and not have to worry about. cleaning up extra pots & pans. (It also Cooks food evenly)Thanks Amazon! :+)", "the griddle is just the right size for a 1-2 people. It is compact enough that i can place it under the oven to store it.it is great.", "This griddle is about the right size for two people. It is sturdy, heats evenly is easy clean. Wife loves it."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,798
|
It's 3/8" and comes with a 1/4" adapter insert if you wanted to mount it on top of another tripod or similar.
|
{"question": "Can someone clarify if the BOTTOM thread of this head is 1/4\" or 3/8\"? (I'm NOT concerned about the thread on the quick release plate!). Thank you!", "document": ["I bought this for use on my Monfrotto Video monopod with the idea that I can unscrew the video head and use this head for my 70-200 lens when shooting stills. Since I am using the Video monopod it has built in panning left and right at the base of the monopod. While this head isnt super smooth it is very simple and lightweight. It was quick to screw on and fits both 1/4" and 3/8" threads with the included reducer brushing.", "Works as advertised. I thought I would need a 1/4 to 3/8 male/female adapter but did not. Feels like it is well built and holds my D700 with a 70-200mm lens with no issues.", "Great monopod head! One quick release plate to rule them all.....from landscape view to profile view in zero seconds flat, well maybe 1 second, but still, it's got a nice beefy feel to it.", "I just got aGiottos MM9180 5-Section Aluminum Monopodand this head fits perfectly inside the monopod's carrying case.Now I'm looking for another head for myBenro A2970F Versatile Tripod with Aluminum Flip Lock Legswhich uses the same Quick-Release Plates as the 234RC.Can anyone recommend a pan/tilt head for a Sony DCR-SR100 Camcorder which weighs about 1.5 lbs? It seems like a manfrotto 701hdv might be overkill for such a light camcorder.", "Manfrotto has just way too many heads available for their monopods and tripods. It took me forever to figure out what to buy. I'm really happy with this simple, small, rock solid, flexible head.For me, this head screws onto the Manfrotto 682B Self Standing Monopod (Black). Attachment couldn't have been easier, thread on the bottom of the head to the top screw of the monopod. Bam, job done.What I really like about this head, the quick release mechanism.", "I wanted a simple \"head\" for my monopod....nothing expensive, difficult to use, compatible with my existing tripod. I like this head as it is very straightforward with minimal adjustment, and it comes with a quick-release plate. I'm am extremely pleased...Manfrotto has a customer for life!", "thank you for the delivery...i got it on time,though i was a bit worry i couldnt get the item in 3 days due to the distance for delivery to australia.I would recommend u to all my friends who is looking for something", "Monopod head is sturdy, well-made, quick-release with lock works well. The up and down panning is sufficiently not smooth as to render this movement not useable. I'm not sure if a touch of oil will fix this or not. I would probably look for a different ball head in a future purchase.", "It has no problem handling the weight of my camera, although I'm careful with it just in case. For most folks taking photos of kids at various outdoor sports, this is the perfect solution. I can't imagine using a monopod without it. The head swivels 90 degrees for vertically composed shots. The locking quick release allows for fast removal of the camera for hand held shots.", "I purchased this to mount a D300 with 70-200 f2.8 VR zoom on a Bogen 679 monopod. The camera and lens are of substantial weight and I was worried that the head might not be able to handle the weight of the camera. It's rated for a 5.5lb capacity. My camera with the lens and MB-D10 weighs a beefy 6lbs 10oz, so I'm overtaxing it. If I was a working pro, I'd want something more substantial."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,822
|
NopeThey are connected.Table is one pieceChairs are individually one piece
|
{"question": "Do the table and chairs have connecting parts (e.g. do the legs come off or are they attached)? I had this similiar set years ago for my 9 year old and the legs came off the table and chairs.", "document": ["My brother and I had a little tikes table and chairs when we were kids, and now my daughter and son have a set. Classic, functional and definitely affordable, this will be of use for years to come.", "This is an ABSOLETE table and chairs....I have ordered this set and it came to me with uneven table legs....sent the set back and got another with uneven table legs....called Little Tikes HQ and was told this set has been discontinued....sent it back got refund and looking to order a different set.", "I bought a yellow set with blue chairs for my older daughter 10 years ago when she was a toddler. That one is still being used for my new little one at grandma's house and this new blue table with green chairs set is used at my house. So this set is sturdy, lasts for years and just the right size for a toddler. Perfect product.", "Any little tikes product is worth the purchase. This set was the perfect size for my 2 year old grandson. age recommendation I think is about 2-3 years old...maybe a smaller sized 4 year old...beyond that, this set is small in size", "I bought this for my 18-month old grandaughter who just loves it. She brings her dishes on the table and climbs on the chairs and sits and awaits a tea party with grandma. The set is durable and constructed well so there is no tipping or moving and is great for them to play even when I'm ten feet away. I only wish I could order two more chairs as it only came with two and sometimes I need more.", "This table and chairs are very cheap and light. The chairs are so light my 2 year old has a hard time sitting in them (because they move when touched). Cheap set... I wouldn't buy this set again if I had a do-over.", "This table and chairs is great for my 2 year old. He loves to sit at his little table. I believe for the price, it is a good deal. No assembly required, it comes right out of the box ready to set up.", "This is the perfect table and chair set. It is perfect for a 2, 3, or 4 year old. It is perfect for inside or outside. And it can just be hosed off if it gets dirty. Very durable. I bought a wooden table and chairs for my granson last year and this year decided to buy this little tykes for my granddaughter. This is a much better choice. And half the price.", "This is an awesome table and chair set it came already together and my 18 month old daughter absolutely loves it! Great buy!", "I was so happy that the table and chairs came on time. The material is very good and colors are great. My 22 months old boy loved it, but I noticed a manufacture defect on the top of the table. It is not really flat at all. It has a little bump that makes a little hard to place the plate. I couldn’t give it a five start because of this defect. So disappointed.."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,828
|
Unfortunately not
|
{"question": "Is this adapter the same as the ASUS original? Are there any differences? Is charge correctly shown by laptop & red light turning green if charged?", "document": ["It's extremely difficult to match which charger goes with your ASUS laptop. I ordered this one to find that it didn't work (the plug to the laptop was too small). I emailed the vendor and they asked for the laptop model and for me to specify what didn't fit. I did so, and they sent a replacement that works! It is different than the original as the LED on the charger doesn't change color when the charging is done, but it'd not a big deal. Excellent customer service. Thanks!", "This power adapter was reasonably priced, when comparing it to other vendors, and the Flash Drive was an added bonus.Shipping was OK, especially considering that it shipped free from Amazon.For those who order this OEM adapter, please make sure, that it is the one for your notebook. ASUS has several notebooks, that all use different adapters, even though they look the same, there are differences both in output rating and the physical connector.", "Like other replacements for this power cord it's not quite exactly the same as the original I got with my Zenbook UX21E. Instead of there being a green light that turns orange when charging, it stays blue all the time. But the plug to the wall socket feels sturdier and more secure than the original one, which felt loose in the plug, and the plug in to the computer also feels sturdier and like a better fit.", "The adapter charge my asus ux21e very well. Work perfectly without any overheat. I will recommend this store to everybody", "I received the adapter and it did not fit my particular model of laptop; I contacted the company and they sprung into action to get me the proper model adapter. They even reimbursed me for the shipping of the return in a timely manner. Sure these are all things we expect, but it is rare that companies seem to make it priority... especially for a relatively inexpensive item. Kudos to them. As for the product-- it works well so far.", "The looking is different from the original one, but it fits my UX12E very well, good seller! And thanks to the USB, my old one just broke", "This works for the UX21e and UX31e. Fit and worked perfect! Would recommend as replacement or backup for factory charger.very happy with it", "The shipping was fast and the items works well. The only problem is the plug might be a little loose because it drops by itself a couple of times without outside forces. Overall, I am very satisfied with this purchase.", "The charger cord did not have a model number with it, so I went solely by the picture. It LOOKED like the same cord as the one my bunny chewed, but it was not. Not enough info provided by company. I will say it was an extremely easy return and when I checked on an exchange with the company they were able to tell me "No, we do not have the cord you are looking for."", "It died with no warning and I got this one as a replacement and am very happy with it. It doesn't get too hot. Also, it shipped to me in Hawaii in only 3 days - that's got to be some kind of a record."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,831
|
Yes, the 47513 is a bit more flexible, but not as flexible as, for example, a filet knife. I actually prefer the curved boning knife, 47517, because the working angle is more comfortable for me. In general, however, I have been very pleased with the Victoriox knives.
|
{"question": "What is the difference between the 47513 and the 47515? I'm guessing it's a matter of stiffness. Yes?", "document": ["Make no mistake -- this is a boning knife. Its stiffness means it is not very suitable for filleting. If you desire a knife to perform double duty, you should probably look at something else (i.e. a flexible or semi-flexible blade).ProsPrice (dirt cheap)Good edge with decent edge retention (Yes, it is a stamped blade and the steel does not compare to the SG2 of my chef's knife or paring knife, however, it is more resilient than I had expected.", "I use this to bone out prosciuttos which is no easy task. The stiffness and sharpness of the blade makes short work of it, separating flesh from bone even after years of aging. Can't beat the price, either!", "I'm planning of getting a full set of Victorinox knives for next summer's BBQ season.", "Probably better to say that this knife is a boning knife, if it actually was. I find that when I'm boning pork butts(shoulder) that I leave more meat on the bone, when the knife is brand new. After about eight to ten months of sharpening, the tip is small enough to hit the curves.", "I'm very happy with this knife. It's super sharp and does an excellent job. The other knives in my kitchen are mostly J.A. Henckels, I'd always been kind of a snob about them -- If not Henckels, then why bother? This knife proved me wrong.The only thing that took a bit of getting used to was its weight. It's a very light knife.", "I've had this knife in my block for a while now, and I'm still impressed.For a cheap knife, the stamped blade performs very well. The edge is razor sharp from the factory, and stays that way with minimal effort. Treat this knife well and you will be very happy.That said, before you buy, give some thought to whether you want a straight or curved blade.", "I was a meat cutter for 15 years until 1993. I only cut an occassional item around the house now, but I found myself in need of a new boning knife and took a chance on this one. I had always used Case knives when I worked at the store, but this is a great knock-off at a third the price. The blade is just the right stiffness and the handle is made from the same material Case used all those years.", "Would I like to have a $100 Shun boning knife? Sure who wouldn't, but at 1/5 the price this does the same job just as well. Seems to have held it's edge after a few uses and I'm sure will over time with regular steeling and occasional professional sharpening. Like all the Fibrox knives the handle is nicely textured and gives you a secure grip even when your hands get wet.", "I'm slowly replacing all the knives in my kitchen. This time I'm buying great ones instead of cheap ones. This is one of many I 'll buy in the future. This , along with future purchases will be professionally sharpened when that time eventually comes. Has a nice sharp edge and cuts well. I expect it will hold it's edge a long time as I don't abuse my utensils.", "I bought this knife mostly to trim fat off meat. Im a backyard bbq guy and I'm always trimming different types of meats such as Pork, Beef, Chicken & sometimes fish. This little guy does an amazing job & the semi stiff is perfect only because i dont use it to filet anything. The handle also has the perfect grip and is very comfortable. Care for this knife is also easy, all i do is wash it, dry it and put it back in my knife case."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,834
|
I went to pick mine up after satisfying myself that they were indeed made in Japan. My experience with my old Canon A-20 Powershot convinced me there's a difference. I'd just purchased it (2002 ?) and the next week they introduced the A-40 which offered video as well. Since I was still inside my 30 day return window I picked up the A-40 and compared the two in detail for a couple of weeks. The A-20 was made in Japan and the A-40 was made in Malaysia, or Singapore, or Myanmar. I can't remember exactly. Big difference! Fit and finish was superb on the Japanese version. Poor on the other. In one of the zoom steps I came to see an out-of-focus area where the Japanese version was consistently sharp. I returned the A-40 and kept the A-20. Still works great. Now the 780. I went to Best-Buy to pick it up and at the last second I decided I'd better verify that it was Japanese too. Nope, it was Chinese. I explained my concerns to the checker and requested to examine their inventory for the Japanese version I wanted. Fortunately, I was in luck. There was only one amongst several Chinese examples. I snapped it up and it's been just wonderful. To be completely fair and honest I must confess that my earlier experience with the A-20 may not have any validity today. I didn't do an in-depth comparison between the Chinese/Japanese versions. For all I Know the Chinese version is the superior of the two. I was simply relying on my limited, singular experience. The reviews here at Amazon are pretty accurate. My only issue is the audible noise in video mode. If it's a quiet setting you WILL hear it. Not a problem for me. I use it mostly for dirtbiking, snowmobiling, and boating.
|
{"question": "where is canon sd780is made? i just received mine and it said it was made in China. i read else where it is made in Japan. can someone tell me if they made any of sd780 in japan?", "document": ["Perhaps there is a difference in manufacturing as I understand that theCanon PowerShot SD780IS12.1 MP Digital Camera with 3x Optical Image Stabilized Zoom and 2.5-inch LCD (Black)used to be made in Japan and now, like mine, is made in China. I discovered a couple video samples with the humm, one I believe was in a review here on Amazon. I tried recording video in several different situations and the audio humm made the video unacceptable in every instance.", "I don't know how much a factor this is because a lot of people seem to have SD780s that were made in Japan, but be aware that at least some are made in China.", "With the countdown to my vacation I had purchased it to take on at 2.5 weeks, I sent it back to Canon. I received it back today, literally 1 day before we leave.. . and to my distaste, it continues to do the same thing. Again on hold with Canon, they continue to tell me they will \"repair\" only, and that I should send it back to them, even though they have replaced the ENTIRE INSIDE OF THE CAMERA!", "I had to have the camera lense cleaned up 2 times in 2 years. Poor construction may have something to do with it. I have used many Canon's but this is my first \"Made in China\" Canon...-Optical zoom is almost unusable because picture becomes very blurry and unacceptable. This is more prominent with video.-There are only 2 settings for image quality: Fine and Normal. They removed Superfine in this one.", "I've used lots of digicams. My initial impression of the SD780IS is that it does a great job for its size, and my Made-in-Japan version seems sturdy and well-built.There are plenty of good reviews here about the PQ of the still shots, so I won't comment there, and I'm not much of a photographer anyway.But for the video, I'm very impressed. I've tried 3 or 4 different still cams that do HD video, and so far the Canon rules them all.", "As someone who factors in a product's design and aesthetics almost as much as its functioning, this was a clear-cut and easy decision, but the SD780is isn't just about looks -- it delivers astonishing pictures as well! I'm not a person who likes to fuss around with settings and menus (like on DSLR cameras,) but I still want nice pictures!", "Love this camera. And the price!!!! Cheaper than anywhere else-- with free shipping too! I saw this camera in a store and am very happy that I checked Amazon before I made the purchase.", "I was going to buy the Flip HD Ultra for [...] at costco but sawa comment on this site about getting this camera instead. Greatpictures that you can't get with the Flip, about the 1/3 of the size,and best of all is sweet HD video!Someone said the play back was choppy or missing frames but it's yourcomputer not the video. I have a 4 year Dell laptop dual core at1.87 mhz with 4 gigs and plays smoothly.", "The \"Smart AUTO\" feature really is just \"Point and Shoot\" too! Where there were certain settings to mess around with on my SD1100isThis camera makes perfect sense, really. It's easy to carry with you, very easy to use, so the chances of capturing that \"picture perfect moment\" have increased considerably over other cameras. The only thing that I am disappointed with seeing is \"Made in China\" on the bottom of the camera's casing.", "I bought this camera and received it (two days later) the day we were leaving for a 3 week drive from Texas to the West Coast. No time to read the instructions, but turns out it is very intuitive and easily figured out. It worked like a champ, staying charged forever, taking beautiful clear pictures in any light. Not super fast, but much better than my old fuji (that I really liked)."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question using the supporting document.
| 140,854
|
the Sony model CFD-S05 does not have any remote or external inputs only the ac power cable and the headphone jack
|
{"question": "Does this CD-R/RW come with remot control ? Does this unit has USB connection? Please give othe Sony model with theswe features.", "document": ["My Sony CD/Radio was on my steps in two days, great service. This is the percect item for what I wanted. The radio has wonderful sound and is almost always on! The CD Player has great base and I can crank it during the day when no one is around. This is a basic model which is perfect for my experience, I did not want a ton of features that I would not use. The price was exactly what my budget allowed for. Great purchase for a reasonable price.", "The Portable Sony CD CD-R/RW digital Radio AM/FM tuner Cassette Recorder met all of my expectations and performs perfectly. Since the majority of the buttons and the read-out screen are in the front of the radio instead of on the top, it is difficult to read the settings if the radio is sitting in a low position. Therefore, a higher position makes it easier to operate.", "I've always liked Sony products and have bought them over the years without reservation; but this Radio, CD, Cassette player is poorly engineered. The cassette will only play if the lid is open. The lid will not close if a cassette is in position. :( Jeanene Malan", "Unfortunately I have quite a collection of cassette tapes, so that was a priority when I was searching for a replacement sound system priced more reasonably than a Bose. I was pleasantly surprised at the quality of the sound. I'm no expert, but to me, the sound on the Sony is outstanding. There are a lot of features I still haven't explored-- but I especially like the Preset radio stations feature and the remote.", "The unit is great. Everything works well and the sound it also great. This unit gives us great FM reception even in the mountains. We are very pleased with it.", "Although I purchased this unit thinking it did in fact write CD's ( which it does not ),( but does in fact record cassette only) I ended up keeping this portable stereo because it has great sound.", "So far a very good CD player.", "Not at all like a garish \"boom box.\" The Xtech CD lens Cleaner was a nice extra but I haven't used it yet. For the money, I don't think you can go wrong with this item.", "I got the radio and the dvd lens leaning disk and the movie but i didn't get the cord or fhe cloth. please send these 2 Items to the same mailing adress. Thank you.", "Very good sony product, tho will not play from my iPad feed. I'll blame Apple for that."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,856
|
I bought the USB dongle for my Tab 3 and I've used it for USB jump-drives, my camera, my phone to share the data, and just cause you asked and I wanted to know. Why yes it does work with a USB keyboard. You might want to consider getting a small bluetooth keyboard just for ease. That's what I normally use with my tablet, but the USB keyboard works just as well with the dongle.
|
{"question": "Will this connect a tablet case that has a keyboard?", "document": ["I purchase this cable for my office samsung galaxy tab 3 8 inches. I use this cable to connect to the tablet mainly for packages scanning. It works as described.", "we bought this to use with the Samsung galaxy note 10.1 2014 edition tablet. works great, nice and compact, easy to store", "There are several ways to transfer data from a PC to Tablet etc. This adapter gives you quick & simple way to transfer large amounts of data and is handy if your don't have access to the other methods.", "This adapter is good because it can connect regular portable hard drives. The other off-brand USB adapter doesn't work as good. I tested this on USB memory stick, memory card reader and portable hard drive. They all work. Great buy.", "Works great with the Samsung Galaxy Tab Pro. My only complaint is that you have to use this expensive proprietary adapter rather than a cheaper generic MHL adapter. The whole reason I use Androids is so I don't get stuck with proprietary equipment requirements.", "Works great for everything, bought it for my Samsung Galaxy Note 10.1 2014 edition, use it for instant connection to printers, flash drives, my voice recorder, my cell phone, EVERYTHING. Has been plug and play for every single thing I've tried. Verify the number of pins your samsung device has on its micro-usb port before purchasing or you may need another model or an adaptor", "Works as described. Great Service from Nu Image (U.S.P.S. ), travelled across the pond faster than something ordered from half way across my own country. Wouldn't hesitate to order from them again.The only advice I would give to Nu Image is if possible post inside padded bag as card was badly ripped either by customs or wear and tear. Item would have been easily stolen or dropped out of package.", "USB data transfer adapter works great. I use it to watch movies from my flash drive or external drive. Also, UPS lost my order, but Nu-Image resend another one right away.", "This was exactly what I was looking for to use with my Samsung Tab 3 10.1, and found out that I can also use it on my Samsung Galaxy S3.", "This was a gift"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Extract information from the supporting document to answer the given question.
| 140,896
|
A1: in my experience (almost 2 years now) yes, this works GREAT with carpet.A2: I have used both the pet upgrade and the original brushes for these past 2 years. I can't say there is a noticeable difference in performance. The biggest difference is that the pet brush needs to be cleaned semi-regularly because human hairs get wrapped around it, whereas the original brush requires virtually no maintenance. Perhaps the pet brush is better on carpet- I'm not sure. On our hardwood floors it makes no difference, and I have 2 cats and a dog.
|
{"question": "Does this vacuum do well with carpet? If you prefer brissells did you purchase the pet/allergy upgrade brushes?", "document": ["It's unfortunate that I paid $50 for the upgraded pet/allergy brush but I guess that's the price I pay for not believing the other reviews advising how well these Neato's work within the first few weeks/months... And then sharply drop off in reliability. It's sad. This product is incredible, if only it reliably worked for longer than a week.", "Understand that I am a Neato fan - and will remain one. This is my third Neato, but this model is very quirky compared to others and the suction not as good. Will try the newest version or revert to my older Pet and Allergy model.", "The brush too is not properly designed for my all tile floors, and unless I spend $50 on the pet-upgrade kit, will continue to miss things.Unlike other robot vacuums that tend to work in a linear back and forth type pathway, the XV-14 wonders around in a sort of drunken-sailor gait. It tends to drive in a straight line for a bit, then in the middle of a room, turn randomly at an angle and drive off somewhere else.", "However the new firmware Neato bumped into the chair once, then rotated around making a new map and carried on its way successfully (including docking later). It also apparently deals better with rug fringes, but we don't have those to worry about.We also purchased the pet/allergy brush and filter. The pet brush picks up more cat hair on rugs, and it is also much quieter on hard floors - the original brush sounds like a motorboat on hard floors.", "So the dock failures don't upset me. Battery life is ok. I have half-shag carpet throught my main rooms and tile in the kitchen/dining room. It will run for 30-35 minutes before returning to the dock. 2.5 cleaning cycles does my whole house. Someone with smoother carpet or hard surfaces would certainly get more runtime. If Neato ever put out a Li-ION battery/charger upgrade kit, I would buy it right away.", "The Roomba's strength here is that it runs for up to 3 hours vs. Neato's 30-45 minutes, but their seemingly random movement means it takes about that long to cover an entire space. The Neato did a great job picking up pet hair of my hardwood floors. I also purchased the \"pet upgrade\" that effectively turned one of my Neato's into a XV-21 series. I have to say that I saw no appreciable difference in it's ability to pick up pet hair.", "It worked well in our open floor plan condo. However the Roomba itself needed a lot of TLC. For example the brushes and ends needed daily cleaning to remove fluff and hair that would wrap around, and if not removed the Roomba would stop and bleep error messages that it's brush was stuck. After a few months, the plastic gears would strip and the brush head module would need to be replaced.", "Update after 3 months of use:Bertha really keeps the house clean. In the basement you can see the difference very well because there's a light colored carpet, and as stated she can't clean closer than about an inch to the wall, so now I have a beautiful white carpet with a 1-inch black border around it...The magnetic strips and tapes I bought off ebay (intended for refrigerators, crafts, whiteboards etc.)", "I purchased one of these for my 700 sqr ft apt, have a dog and a cat, and I can proudly say the Neato does its job well. I really run this thing hard, too. 7 days a week, 2 times a day. It picks up a full bin of pet hair and dust every day.", "I purchased the Neato XV-14 as well the upgraded pet brush/filter. I received the product and set it up (and charged) as per Manufacture's instructions. The product worked great for 1 sweep of the house, and then it went back to it's charging station. Ever since, I've had sporadic results.The robot went back to it's charging station, and then never continued on with the cleaning of the house."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,904
|
prob China, but I like it .......... anyway.
|
{"question": "where is it made? china? USA", "document": ["Excellent in the summer! Keeps butter soft and fresh. We live in WI and the winters are cold and we found the butter got too hard so we stopped using it for the season. I am concerned about it being made in China though. They are not as careful with the environmental issues. May spend more and get one of the products made in France or preferably the USA. Wanted to see how they worked and the price was right.", "The item shipped fast.I wish I would have known it was made in China. :[Perfect for everyday use!", "Butter kept in this container For a week developed a very nasty chemical reek, like burning plastic. This product needs to be taken off the shelves and tested for toxicity. Another poisonous piece of junk made in China.", "I purchased this because I liked the simplistic look of it, and I'm sure it will serve it's purpose. However if I had known it was Made in China I would have gone to an artisan here in the US and asked them to make me one like it thereby supporting my local economy.", "There is no traditional layer of glaze over fired clay because it is made from New Bone China. The clay itself is sealed so there is no need for a layer of glaze that will eventually crack like the Norpro.New Bone China is a relatively new invention by the Chinese and it is it is a unique claybody type. Essentially it is a porcelaneous stoneware that is fluxed with calcium.", "I purchased this recently in an effort to move away from fake butter products. Butter really is the healthiest spread, but when it tears your bread up, well, you know the rest. But I am alarmed that this is made in China. All the recent issues that China has had with toxins in their products has made me let this product sit out, unused.Thoughts?", "my butter keeper arrived. I ran it through the dishwasher, top rack, then filled it as directed and enjoyed it until it was empty. Then I put it in the dishwasher again, top rack, and took it out this am and it has a crack in it. Not a surface hairline thing but a crack I can feel, which let water in to the china, leaving a stain. This was in the top part, which I've thrown away.", "Very well made and looks smart.", "This is a quality product, great idea, really well made, just what I wanted, butter stays really fresh, looks good too!", "This keeps your butter soft and spreadable. Very well made durable product! I recommend to everyone who is tired of trying to spread cold butter."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Given a question and the related document, and generate the answer to the question based on the information provided in the document.
| 140,911
|
Very quiet. I don't hear any sound coming from it at all and it stays nice and cool, so the fan must be working!
|
{"question": "Is it quiet?", "document": ["The display is nice and it's a fairly lightweight laptop. It doesn't get hot and the fan is fairly quiet.I upgraded the RAM with another stick to 8GB in dual channel for a little performance boost, it's relatively inexpensive and easy to do so it's worth a little extra money to get more memory.", "I didn't buy this from Amazon, but thought I'd post a review here anyway.I finally broke down and bought a laptop for myself. I use laptops at work and I've bought some for my kids, but I haven't had one for myself in years. With this laptop, it was worth the wait.I've been using this laptop for a couple of weeks and have been very happy. It runs quiet and it doesn't overheat.", "I chose this rating because i recently bought this laptop with 1 day shipping. The performance was decent for the price. It was also very quiet if the only thing you do is browse the web and watch HD youtube videos.However, my laptop was defective, and the touchpad was a nightmare. Whenever i plugged my ethernet cable in, the touchpad would suddenly go crazy all over the place.", "wonderfull, excellent product, the most advanced notebook, low cost, high quality of design and materials manufactured. i am very happy", "windows 8 is definitely much more difficult and completely different from any other windowsit is a big headacheand it's driving me absolutely crazy and you can't get the app to shut down they continually run in the background", "very fast booting, suitable for business. User interface is good, but there were too many asus' software in the home screen.", "used for work and recreation. The small compromises i made for price were more then satisfied by function and reliability.", "the worst laptop I ever tried. the touchpad is very sensitive for every touch, the keyboard is very bed as well. the HDMI doesn't work fine with Sony TV . I had several problem with the USB 3 and I sent the laptop 3 times for fix this issue.VERY BAD PRODUCT! !", "select the \"driver\" tabf. select \"uninstall\" and follow the on-screen instructions4. Install the new synaptics drivers5. You now have better mouse handling, and you can right-click the trackpad icon in the desktop tray, go to the \"Device Settings\" tab, and disable the trackpad.6.", "it simply wont boot. this unit is running 16gb of 1600 ram flawlessly. and before this unit retires, with the latest BIOS and chipset drivers, i will try 32gb.overall, great unit at a great price, as long as you can find no sales tax and free shipping. easy to find"]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Answer the given question by extracting information from the supporting document.
| 140,913
|
The Netflix app is available (free). I just streamed two movies over the weekend without any issues or buffering. The screen on this tablet is amazing.
|
{"question": "Netflix Can't get Netflix on my 10.1 Will it be available soon for this tablet?", "document": ["I now am not so enamored with the Galaxy. I almost never use it anymore. What is also really disappointing is that Samsung had stated that Android 4.x Ice Cream Sandwich would be made available soon after release. Well, I'm still waiting. Meanwhile I can get ICS via the same N2A card on my Nook. I actually got the Samsung tablet because they stated that ICS would be there soon. The fact that I can get it on my Nook before Samsung releases ICS.", "Out of the box, you can easily personalize an Android 3.1 tablet any way you want, and if you can't, there is free software out there to let you do it -- there is no hacking/jailbreaking required. The Tab 10.1's interface is also a lot cleaner than the iPad 2's which can get downright cluttered the more apps you have installed.", "I'm sure some of you are waiting for Tegra 3, but I can't imagine needing this device to run faster than it already does. 10.1 is the perfect size for a tablet. If you're considering a 7-inch tablet, stop it. Might as well get a 4.3-inch phone.3) PortsIn my opinion, this issue has gotten blown out of proportion.", "STILL NO HULU! (8/2011)I bought a tablet so I could leave my laptop at home. With the Samsung Galaxy Tab 10.1, I can't do that. Very nice and light, but if it misses basic functions, what's the point. It has Flash, but what's the use when it doesn't work well. You can't get Hulu, and it almost seems that when you can it will be by subscription to Hulu+.", "And Cloud storage means I don't have to store music, videos or files on the device itself. It's great for watching Netflix with no hitching on video or sound. I use a JBL bluetooth rechargeable headset for audio. The sound is fantastic.The apps available are numerous and getting better all the time. The battery life is really good. I get more than 10hrs usually and there are settings that can improve it. The screen quality is better than anything else I have seen. The colors are vibrant and clean.", "Also, Netflix still needs to provide a video streaming client. Both these omissions are common among Android devices and will hopefully be resolved soon.Bottom line: This device is certainly worth your consideration if you are looking for the best performance in a tablet that will do just about everything you want.", "I've had the Samsung 10.1 for almost a month now, and I can't imagine living without it now. It perfectly hits that spot between phone and laptop for me, and the amount of customization and freedom that I get with Android is even better. Amazon shipped it to me fast, on-time, and with zero hassle. Very happy with my purchase!", "The Samsung tablet 10.1 is one of the best electronic device that I bought and I enjoy every time I use it. Is simple and friendly to use, even my wife start using to see how it works and believe me she don't use computer at all, but as soon she used it she fall in love and I have to buy one for her now she is learning spent a lot of time on it.", "This is without doubt the best tablet on the market for the price, I tested several other products including the Ipad and the Samsung Galaxy Tab 10.1 was clearly the best. I was thinking about waiting for the next generation Galaxy Tab 10.1 which will be relased soon but I think the old Galaxy is better equipped (except for Android ICS) and is of higher quality.", "After looking at a bunch of tablets, I chose the Galaxy Tab 10.1 to make it my first Android tablet. It was good and fun to use. However, soon thereafter, I found that I could not use my multi USB A/C adapter. That means that it still discharged the battery while plugged in but I was using it. You need a high current A/C adapter if you want to use it while charging. My car adapter didn't work either, it continually discharged."]}
| null |
Answer_Generation
|
IND_Diverse_Instruction
|
train
| null |
Generate an answer to the question by utilizing the information contained in the document.
| 140,939
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.