code stringlengths 1 1.96M | language stringclasses 1
value |
|---|---|
#!/bin/bash
# notes: XXX qemu burnd one of my cpu`s, lucky me, i bet it was the accelerator :)
# so i use vmware.
wd="`pwd`"
. $wd/env
echo " start krdc 0:3 "
qemu -cdrom /b1/nemonico/nemonico.iso -hda $wd/tmp/nemonico_test.img -boot d -m 256 -vnc 0:3
#qemu -cdrom $wd/nemonico.iso -hda $wd/tmp/nemonico_test.img -boo... | Shell |
#!/bin/bash
PATH=/sbin:/usr/sbin:/bin:/usr/bin:.
export PATH
. /nemonico/BOOT
. /etc/scripts/env
. /etc/scripts/utils.fn
set +eE
if [ "`echo $BOOT_NET_INTERFACE|grep -i dhcp`" ]; then
isdhcp=Y
else
ip="`echo $BOOT_NET_INTERFACE | cut -f1 -d";"`"
netmask="`echo $BOOT_NET_INTERFACE | cut -f2 -d";"`"
gateway="`ec... | Shell |
#!/bin/bash
PATH=/sbin:/usr/sbin:/bin:/usr/bin:.
export PATH
. /nemonico/BOOT
. /etc/scripts/env
. /etc/scripts/utils.fn
set +eE
if [ "`echo $BOOT_NET_INTERFACE|grep -i dhcp`" ]; then
isdhcp=Y
else
ip="`echo $BOOT_NET_INTERFACE | cut -f1 -d";"`"
netmask="`echo $BOOT_NET_INTERFACE | cut -f2 -d";"`"
gateway="`ec... | Shell |
# $Id$
#
PATH=/sbin:/usr/sbin:/bin:/usr/bin:.
export PATH
TERM=linux
export TERM
. /etc/scripts/env
. /etc/scripts/utils.fn
if [ -s "$vp_pass" ]; then
echo " Password for the vault already enterd."
echo " Will disconnect unexpectedly."
else
/getpassword_remote.sh
exit
fi
# vim: ts=2 syn=sh
# profile: end
| Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_console.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do ... | Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_console.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do ... | Shell |
#!/bin/bash
# vim: ts=2 syn=sh
# 1. Load kernel mods
# 2. Load bootnet/sshd
# 3. Get passwd
# 4. Open devices(md,enclayer) , not mount them
# 5. make_key; mkswap
# 6. Mount root, cp /etc/nemonico to initram and do the descriptors
PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin ; export PATH
LD_LIBRARY_PATH=/lib... | Shell |
#!/bin/bash
# XXX
ifconfig -a > /dev/urandom
date > /dev/urandom
ls -R /nemonico > /dev/urandom
date > /dev/urandom
date "+%s" > /dev/urandom
cat /proc/diskstats > /dev/urandom
cat /proc/meminfo > /dev/urandom
cat /proc/slabinfo > /dev/urandom
cat /proc/interrupts > /dev/urandom
| Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_remote.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do... | Shell |
#!/bin/bash
# vim: ts=2 syn=sh
# 1. Load kernel mods
# 2. Load bootnet/sshd
# 3. Get passwd
# 4. Open devices(md,enclayer) , not mount them
# 5. make_key; mkswap
# 6. Mount root, cp /etc/nemonico to initram and do the descriptors
PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin ; export PATH
LD_LIBRARY_PATH=/lib... | Shell |
#!/bin/bash
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
broadcast $... | Shell |
#!/bin/bash
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
broadcast $... | Shell |
#!/bin/bash
# XXX
ifconfig -a > /dev/urandom
date > /dev/urandom
ls -R /nemonico > /dev/urandom
date > /dev/urandom
date "+%s" > /dev/urandom
cat /proc/diskstats > /dev/urandom
cat /proc/meminfo > /dev/urandom
cat /proc/slabinfo > /dev/urandom
cat /proc/interrupts > /dev/urandom
| Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_remote.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do... | Shell |
#!/bin/bash
# $Id$
kmoddir="/medium/kernel-modules/lib/modules/`uname -r`/"
if [ -d $kmoddir ]; then
mkdir -p /lib/modules
ln -bs "$kmoddir" /lib/modules/"`uname -r`" || exit 1
else
echo " ERROR: Did not found a kernel modules directory on media `cat /var/tmp/cdrom_device`, exiting ..."
exit 1
fi
| Shell |
#!/bin/bash
# $Id$
#
. /etc/scripts/env
. /etc/scripts/common.fn
. /etc/scripts/common.disks.fn
. /etc/scripts/vault.fn
. /etc/scripts/disk.fn
. /etc/scripts/lvm.fn
. /etc/scripts/mountpoint.fn
. /etc/scripts/md.fn
. /etc/scripts/enclayer.fn
. /etc/scripts/packages.fn
. /etc/scripts/network.fn
. /etc/scripts/time.fn
.... | Shell |
#!/bin/bash
# $Id$
kmoddir="/medium/kernel-modules/lib/modules/`uname -r`/"
if [ -d $kmoddir ]; then
mkdir -p /lib/modules
ln -bs "$kmoddir" /lib/modules/"`uname -r`" || exit 1
else
echo " ERROR: Did not found a kernel modules directory on media `cat /var/tmp/cdrom_device`, exiting ..."
exit 1
fi
| Shell |
#!/bin/bash
# $Id$
#
. /etc/scripts/env
. /etc/scripts/common.fn
. /etc/scripts/common.disks.fn
. /etc/scripts/vault.fn
. /etc/scripts/disk.fn
. /etc/scripts/lvm.fn
. /etc/scripts/mountpoint.fn
. /etc/scripts/md.fn
. /etc/scripts/enclayer.fn
. /etc/scripts/packages.fn
. /etc/scripts/network.fn
. /etc/scripts/time.fn
.... | Shell |
# $Id$
#
PATH="/sbin:/usr/sbin:/usr/bin:/bin:/usr/local/bin:/usr/local/sbin:."
TERM=linux
PS1="["`tty`"] [\h]:# "
PS2="> "
HOME=/root
export PATH DISPLAY TERM PS1 PS2 HOME
umask 022
. /etc/scripts/env
. /etc/scripts/common.fn
. /etc/scripts/common.disks.fn
. /etc/scripts/vault.fn
. /etc/scripts/disk.fn
. /etc/script... | Shell |
#!/bin/sh
# rc.ieee1394: search for IEEE1394 (firewire) devices needed for installation.
#
# Taken from slackware
# This is a function to unload the IEEE1394 (firewire) modules:
ieee1394_stop() {
modprobe -r sbp2 ohci1394
modprobe -r ieee1394
}
# This is a function to attempt to enable a IEEE1394 storage device.... | Shell |
#!/bin/sh
# rc.usb: search for USB devices needed for installation.
#
# Taken from slackware
# This is a function to unload the USB modules:
usb_stop() {
modprobe -r usb-storage keybdev mousedev usbmouse hid usbkbd \
input uhci usb-uhci usb-ohci uhci-hcd ohci-hcd ehci-hcd 2> /dev/null
umount usbfs 2> /dev/null... | Shell |
#!/bin/sh
# rc.ieee1394: search for IEEE1394 (firewire) devices needed for installation.
#
# Taken from slackware
# This is a function to unload the IEEE1394 (firewire) modules:
ieee1394_stop() {
modprobe -r sbp2 ohci1394
modprobe -r ieee1394
}
# This is a function to attempt to enable a IEEE1394 storage device.... | Shell |
#!/bin/sh
# rc.usb: search for USB devices needed for installation.
#
# Taken from slackware
# This is a function to unload the USB modules:
usb_stop() {
modprobe -r usb-storage keybdev mousedev usbmouse hid usbkbd \
input uhci usb-uhci usb-ohci uhci-hcd ohci-hcd ehci-hcd 2> /dev/null
umount usbfs 2> /dev/null... | Shell |
#!/bin/bash --login
PATH=/bin:/usr/bin:/sbin:/usr/sbin:.
export PATH
HOME=/root
export HOME
/bin/echo "doing /init ...."
/bin/hostname nemonico
setlogcons 12
# Mount
/bin/mount -v proc /proc -n -t proc
/bin/mount -v sysfs /sys -n -t sysfs
#/bin/mount -t tmpfs -o size=64M mdev /dev
mkdir -p /dev/pts
mount -t devpt... | Shell |
#!/bin/bash --login
PATH=/bin:/usr/bin:/sbin:/usr/sbin:.
export PATH
HOME=/root
export HOME
/bin/echo "doing /init ...."
/bin/hostname nemonico
setlogcons 12
# Mount
/bin/mount -v proc /proc -n -t proc
/bin/mount -v sysfs /sys -n -t sysfs
#/bin/mount -t tmpfs -o size=64M mdev /dev
mkdir -p /dev/pts
mount -t devpt... | Shell |
#!/bin/sh
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
. /etc/scripts/env
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
... | Shell |
#!/bin/sh
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
. /etc/scripts/env
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
... | Shell |
( cd etc/rc.d; cat rc.local.rng-tools.append >> rc.local )
( cd etc/rc.d; rm -f rc.local.rng-tools.append )
| Shell |
#!/bin/sh
export PATH="/usr/pkg/bin:/usr/X11/bin:${PATH}"
if [ `id -u` -eq "0" ]; then
export PATH="/usr/pkg/sbin:${PATH}"
fi
export MANPATH="/usr/pkg/man:${MANPATH}"
# gcc34
export PATH=/usr/pkg/gcc34/bin:$PATH
| Shell |
#!/bin/sh
export PATH="/usr/pkg/bin:/usr/X11/bin:${PATH}"
if [ `id -u` -eq "0" ]; then
export PATH="/usr/pkg/sbin:${PATH}"
fi
export MANPATH="/usr/pkg/man:${MANPATH}"
# gcc34
export PATH=/usr/pkg/gcc34/bin:$PATH
| Shell |
#!/bin/sh
NEMONICO_ROOT=${NEMONICO_ROOT:-/usr/nemonico}
export NEMONICO_ROOT
if [ "`id -u`" = "0" ]; then
PATH=$NEMONICO_ROOT/bin:$PATH ; export PATH
fi
| Shell |
#!/bin/sh
NEMONICO_ROOT=${NEMONICO_ROOT:-/usr/nemonico}
export NEMONICO_ROOT
if [ "`id -u`" = "0" ]; then
PATH=$NEMONICO_ROOT/bin:$PATH ; export PATH
fi
| Shell |
#!/bin/bash
# $Id$
tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
for device in /dev/hd[a-z]; do
mount -o ro -t iso9660 $device $tmpmnt 2> /dev/null
if [ $? = 0 ]; then
[ ! -L /dev/cdrom ] && ln -s $device /dev/cdrom
echo $device > /var/tmp/cdrom_device
umount $tmpmnt 2>/dev/null
break
else
umount -f $tmpmnt 2>/de... | Shell |
#!/bin/bash
# $Id$
# desc: output /var/tmp/sd[a-z][0-9] as text file, in it desc and size
# of the device, and to stdout
export syspath=/sys/block
# ex. usblist="sda1 sdb"
export usblist=""
export tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
find_dev_m1 ()
{
for l in a b c d e f g h i j k l m n o p q r s t u v w x y z... | Shell |
#!/bin/bash
# $Id$
# desc: output /var/tmp/sd[a-z][0-9] as text file, in it desc and size
# of the device, and to stdout
export syspath=/sys/block
# ex. usblist="sda1 sdb"
export usblist=""
export tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
find_dev_m1 ()
{
for l in a b c d e f g h i j k l m n o p q r s t u v w x y z... | Shell |
#!/bin/bash
# $Id$
tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
for device in /dev/hd[a-z]; do
mount -o ro -t iso9660 $device $tmpmnt 2> /dev/null
if [ $? = 0 ]; then
[ ! -L /dev/cdrom ] && ln -s $device /dev/cdrom
echo $device > /var/tmp/cdrom_device
umount $tmpmnt 2>/dev/null
break
else
umount -f $tmpmnt 2>/de... | Shell |
#!/bin/bash
set -eETa
set -o pipefail
. ./files/env
. ./files/buildscripts.fn
trap '_chk_err' ERR
export -f _chk_err
make_cd ()
{
./bin/mk-dir-struct.sh
./bin/fetch-src
non_slackware_build # if build host is not slackware
./bin/build-auxbuildroot
./bin/build-nemopkg
./bin/build-installcd
./bin/build-initr... | Shell |
#!/bin/bash
set -eETa
set -o pipefail
. ./files/env
. ./files/buildscripts.fn
trap '_chk_err' ERR
export -f _chk_err
make_cd ()
{
./bin/mk-dir-struct.sh
./bin/fetch-src
non_slackware_build # if build host is not slackware
./bin/build-auxbuildroot
./bin/build-nemopkg
./bin/build-installcd
./bin/build-initr... | Shell |
#!/bin/bash
wd="`pwd`"
. $wd/env
if [ "$UID" != "0" ]; then
echo "ERROR: must run as root"
exit 1
fi
echo ""
echo " For Slackware $slackware_version"
echo ""
echo " This script will copy all packages that appear listed in: "
echo " ./files/installcd-initrd/nemonico/files/packages/pkglist/default "
echo ""
echo... | Shell |
#!/bin/bash
# $Id$
# edit descriptors
# XXX validate descriptors
# optionaly add authorized_keys
# targz it
__get_desc_val ()
{
echo "$(< $1 )" | grep "^${2}=" | cut -f2 -d"=" | sed -e 's/"//g' 2>/dev/null
}
__strip_bdot ()
{
n="`echo $1|cut -f2 -d"."`"
echo $n
}
__strip_adot ()
{
n="`echo $1|cut -f1 -d"."`" ... | Shell |
#!/bin/sh -e
wd="`pwd`"
time="`date "+%s"`"
tmp_pkglist=$wd/tmp/pkglist-$time
. $wd/env
if [ ! "$cksum_file" ]; then
echo ""
echo -n " Enter path to the CHECKSUMS.md5 file: "
read cksum_file
fi
if [ -f "$cksum_file" ]; then
mkdir -p $tmp_pkglist
cp $cksum_file $tmp_pkglist/CHECKSUMS.md5
# strip with result: ... | Shell |
#!/bin/sh -xe
# This is for devel use.
# After changing stuff in files/installcd-initrd and files/host-initram
# and then creating the initrams for testing.
. files/env
./bin/build-auxbuildroot cpfiles
./bin/build-auxbuildroot setperms
chroot $auxbuildroot_dir BIN/build-installcd tree
chroot $auxbuildroot_dir BIN... | Shell |
#!/bin/bash
wd="`pwd`"
. $wd/env
set -ex
./bin/build-auxbuildroot cpfiles
./bin/build-auxbuildroot setperms
chroot $auxbuildroot_dir BIN/build-installcd tree
chroot $auxbuildroot_dir BIN/build-installcd setperms
./bin/build-installcd delstuff
cd $wd/$auxbuildroot_dir/$installcdinitrd_build_dir
tar --exclude=".svn" ... | Shell |
#!/bin/sh -e
wd="`pwd`"
time="`date "+%s"`"
tmp_pkglist=$wd/tmp/pkglist-$time
. $wd/env
if [ ! "$cksum_file" ]; then
echo ""
echo -n " Enter path to the CHECKSUMS.md5 file: "
read cksum_file
fi
if [ -f "$cksum_file" ]; then
mkdir -p $tmp_pkglist
cp $cksum_file $tmp_pkglist/CHECKSUMS.md5
# strip with result: ... | Shell |
#!/bin/bash
wd="`pwd`"
. $wd/env
if [ ! -f $wd/tmp/hda.img ]; then
qemu-img create -f qcow2 $wd/tmp/hda.img 2G
fi
if [ ! -f $wd/tmp/hdb.img ]; then
qemu-img create -f qcow2 $wd/tmp/hdb.img 2G
fi
if [ ! -f $wd/tmp/sda.img ]; then
qemu-img create -f qcow2 $wd/tmp/sda.img 2G
fi
if [ ! -f $wd/tmp/sdb.img ]; then
qem... | Shell |
#!/bin/bash
wd="`pwd`"
. $wd/env
if [ "$UID" != "0" ]; then
echo "ERROR: must run as root"
exit 1
fi
echo ""
echo " For Slackware $slackware_version"
echo ""
echo " This script will copy all packages that appear listed in: "
echo " ./files/installcd-initrd/nemonico/files/packages/pkglist/default "
echo ""
echo... | Shell |
#!/bin/bash
# $Id$
# edit descriptors
# XXX validate descriptors
# optionaly add authorized_keys
# targz it
__get_desc_val ()
{
echo "$(< $1 )" | grep "^${2}=" | cut -f2 -d"=" | sed -e 's/"//g' 2>/dev/null
}
__strip_bdot ()
{
n="`echo $1|cut -f2 -d"."`"
echo $n
}
__strip_adot ()
{
n="`echo $1|cut -f1 -d"."`" ... | Shell |
#!/bin/bash
wd="`pwd`"
. $wd/env
if [ ! -f $wd/tmp/hda.img ]; then
qemu-img create -f qcow2 $wd/tmp/hda.img 2G
fi
if [ ! -f $wd/tmp/hdb.img ]; then
qemu-img create -f qcow2 $wd/tmp/hdb.img 2G
fi
if [ ! -f $wd/tmp/sda.img ]; then
qemu-img create -f qcow2 $wd/tmp/sda.img 2G
fi
if [ ! -f $wd/tmp/sdb.img ]; then
qem... | Shell |
#!/bin/bash
wd="`pwd`"
. $wd/env
set -ex
./bin/build-auxbuildroot cpfiles
./bin/build-auxbuildroot setperms
chroot $auxbuildroot_dir BIN/build-installcd tree
chroot $auxbuildroot_dir BIN/build-installcd setperms
./bin/build-installcd delstuff
cd $wd/$auxbuildroot_dir/$installcdinitrd_build_dir
tar --exclude=".svn" ... | Shell |
#!/bin/sh -xe
# This is for devel use.
# After changing stuff in files/installcd-initrd and files/host-initram
# and then creating the initrams for testing.
. files/env
./bin/build-auxbuildroot cpfiles
./bin/build-auxbuildroot setperms
chroot $auxbuildroot_dir BIN/build-installcd tree
chroot $auxbuildroot_dir BIN... | Shell |
#!/bin/sh
# rc.modules 12.1 Wed Mar 5 23:51:09 CST 2008 pp (rb), pjv
#
# This file loads extra drivers into the Linux kernel.
#
# The modules will be looked for under /lib/modules/<kernel version number>
# On systems using KMOD and hotplug or udev this file should remain mostly
# commented out. Nearly all hardware ... | Shell |
#!/bin/bash
PATH=/sbin:/usr/sbin:/bin:/usr/bin:.
export PATH
. /nemonico/BOOT
. /etc/scripts/env
. /etc/scripts/utils.fn
set +eE
if [ "`echo $BOOT_NET_INTERFACE|grep -i dhcp`" ]; then
isdhcp=Y
else
ip="`echo $BOOT_NET_INTERFACE | cut -f1 -d";"`"
netmask="`echo $BOOT_NET_INTERFACE | cut -f2 -d";"`"
gateway="`ec... | Shell |
#!/bin/bash
PATH=/sbin:/usr/sbin:/bin:/usr/bin:.
export PATH
. /nemonico/BOOT
. /etc/scripts/env
. /etc/scripts/utils.fn
set +eE
if [ "`echo $BOOT_NET_INTERFACE|grep -i dhcp`" ]; then
isdhcp=Y
else
ip="`echo $BOOT_NET_INTERFACE | cut -f1 -d";"`"
netmask="`echo $BOOT_NET_INTERFACE | cut -f2 -d";"`"
gateway="`ec... | Shell |
# $Id$
#
PATH=/sbin:/usr/sbin:/bin:/usr/bin:.
export PATH
TERM=linux
export TERM
. /etc/scripts/env
. /etc/scripts/utils.fn
. /etc/scripts/boot.fn
if [ -s "$vp_pass" ]; then
echo " Password for the vault already enterd."
echo " Will disconnect unexpectedly."
else
/getpassword_remote.sh
exit
fi
# vim: ts=2 syn=... | Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_console.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do ... | Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_console.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do ... | Shell |
#!/bin/bash
# vim: ts=2 syn=sh
# 1. Load kernel mods
# 2. Load bootnet/sshd
# 3. Get passwd
# 4. Open devices(md,enclayer) , not mount them
# 5. make_key; mkswap
# 6. Mount root, cp /etc/nemonico to initram and do the descriptors
PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin ; export PATH
LD_LIBRARY_PATH=/lib... | Shell |
#!/bin/bash
# XXX
ifconfig -a > /dev/urandom
date > /dev/urandom
ls -R /nemonico > /dev/urandom
date > /dev/urandom
date "+%s" > /dev/urandom
cat /proc/diskstats > /dev/urandom
cat /proc/meminfo > /dev/urandom
cat /proc/slabinfo > /dev/urandom
cat /proc/interrupts > /dev/urandom
| Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_remote.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do... | Shell |
#!/bin/bash
# vim: ts=2 syn=sh
# 1. Load kernel mods
# 2. Load bootnet/sshd
# 3. Get passwd
# 4. Open devices(md,enclayer) , not mount them
# 5. make_key; mkswap
# 6. Mount root, cp /etc/nemonico to initram and do the descriptors
PATH=/sbin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin ; export PATH
LD_LIBRARY_PATH=/lib... | Shell |
#!/bin/bash
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
broadcast $... | Shell |
#!/bin/bash
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
broadcast $... | Shell |
#!/bin/bash
# XXX
ifconfig -a > /dev/urandom
date > /dev/urandom
ls -R /nemonico > /dev/urandom
date > /dev/urandom
date "+%s" > /dev/urandom
cat /proc/diskstats > /dev/urandom
cat /proc/meminfo > /dev/urandom
cat /proc/slabinfo > /dev/urandom
cat /proc/interrupts > /dev/urandom
| Shell |
#!/bin/bash
# $Id$
. /etc/scripts/env
. /etc/scripts/utils.fn
. /nemonico/BOOT
echo $$ > /tmp/getpassword_remote.sh.pid
count=0
pass1="0"
while [ "$pass1" != "$pass2" ]; do
if [ "$count" = "3" ]; then
echo "Reboot ..."
reboot
fi
if [ "$count" != "0" ]; then
echo "Passphrase do... | Shell |
#!/bin/bash -x
# desc: Add it to AUTOINSTALL:DO_CMD_ORDER for reseting
# metadevice disks
DISKS=""
for l in $DISKS ; do
mdadm --misc --zero-superblock $l || :
done
| Shell |
#!/bin/bash -x
# desc: Add it to AUTOINSTALL:DO_CMD_ORDER for reseting
# metadevice disks
DISKS=""
for l in $DISKS ; do
mdadm --misc --zero-superblock $l || :
done
| Shell |
#!/bin/bash
# $Id
. /etc/scripts/env
. /etc/scripts/common.fn
. /etc/scripts/vault.fn
date "+%s" > /var/tmp/aasp_timer
while true; do
if [ /var/tmp/aasp_timer ]; then
t1="$(</var/tmp/aasp_timer)"
t2="$(date "+%s")"
if [ "$(($t1 + 240))" -lt "$t2" -a "$(<$disk_commit_switch_running)" = "0" ]; then... | Shell |
#!/bin/bash
# $Id$
kmoddir="/medium/kernel-modules/lib/modules/`uname -r`/"
if [ -d $kmoddir ]; then
mkdir -p /lib/modules
rm -f /lib/modules/"`uname -r`"
ln -bs "$kmoddir" /lib/modules/"`uname -r`" || exit 1
else
echo " ERROR: Did not found a kernel modules directory on media `cat /var/tmp/cdrom_device`, exiti... | Shell |
#!/bin/bash
# $Id
# wget update_tar
# mktmpdir; unzip
# tar list; cp from list local files; save
# untar update
# prompt for new screen
. /etc/scripts/env
. /etc/scripts/common.fn
tmpdowndir="$(mktemp -d /tmp/tmp.XXXXXX)"
tmptestdir="$(mktemp -d /tmp/tmp.XXXXXX)"
source_addr="ftp://ftp.nemonico.org"
update_file="/n... | Shell |
#!/bin/bash
# $Id$
kmoddir="/medium/kernel-modules/lib/modules/`uname -r`/"
if [ -d $kmoddir ]; then
mkdir -p /lib/modules
rm -f /lib/modules/"`uname -r`"
ln -bs "$kmoddir" /lib/modules/"`uname -r`" || exit 1
else
echo " ERROR: Did not found a kernel modules directory on media `cat /var/tmp/cdrom_device`, exiti... | Shell |
#!/bin/bash
# $Id
. /etc/scripts/env
. /etc/scripts/common.fn
. /etc/scripts/vault.fn
date "+%s" > /var/tmp/aasp_timer
while true; do
if [ /var/tmp/aasp_timer ]; then
t1="$(</var/tmp/aasp_timer)"
t2="$(date "+%s")"
if [ "$(($t1 + 240))" -lt "$t2" -a "$(<$disk_commit_switch_running)" = "0" ]; then... | Shell |
#!/bin/bash
# $Id
# wget update_tar
# mktmpdir; unzip
# tar list; cp from list local files; save
# untar update
# prompt for new screen
. /etc/scripts/env
. /etc/scripts/common.fn
tmpdowndir="$(mktemp -d /tmp/tmp.XXXXXX)"
tmptestdir="$(mktemp -d /tmp/tmp.XXXXXX)"
source_addr="ftp://ftp.nemonico.org"
update_file="/n... | Shell |
# $Id$
#
PATH="/sbin:/usr/sbin:/usr/bin:/bin:/usr/local/bin:/usr/local/sbin:/etc/scripts:."
TERM=linux
PS1="["`tty`"] [\h]:# "
PS2="> "
HOME=/root
export PATH DISPLAY TERM PS1 PS2 HOME
umask 022
. /etc/scripts/env
. /etc/scripts/common.fn
. /etc/scripts/common.disks.fn
. /etc/scripts/vault.fn
. /etc/scripts/disk.fn
... | Shell |
#!/bin/sh
# rc.ieee1394: search for IEEE1394 (firewire) devices needed for installation.
#
# Taken from slackware 12, here for reference
# This is a function to unload the IEEE1394 (firewire) modules:
ieee1394_stop() {
modprobe -r sbp2 ohci1394
modprobe -r ieee1394
}
# This is a function to attempt to enable a ... | Shell |
#!/bin/sh
# This is a script to initialize udev, which populates the /dev
# directory with device nodes, scans for devices, loads the
# appropriate kernel modules, and configures the devices.
#
# Taken from slackware 12.2, with some mods :)
#
PATH="/sbin:/bin:/usr/sbin:/usr/bin:"
OPT=""
. /etc/udev/udev.conf
# remo... | Shell |
#!/bin/sh
# rc.usb: search for USB devices needed for installation.
#
# Taken from slackware 12, here for reference
# This is a function to unload the USB modules:
usb_stop() {
modprobe -r usb-storage keybdev mousedev usbmouse hid usbkbd \
input uhci usb-uhci usb-ohci uhci-hcd ohci-hcd ehci-hcd 2> /dev/null
um... | Shell |
#!/bin/sh
# rc.ieee1394: search for IEEE1394 (firewire) devices needed for installation.
#
# Taken from slackware 12, here for reference
# This is a function to unload the IEEE1394 (firewire) modules:
ieee1394_stop() {
modprobe -r sbp2 ohci1394
modprobe -r ieee1394
}
# This is a function to attempt to enable a ... | Shell |
#!/bin/sh
# This is a script to initialize udev, which populates the /dev
# directory with device nodes, scans for devices, loads the
# appropriate kernel modules, and configures the devices.
#
# Taken from slackware 12.2, with some mods :)
#
PATH="/sbin:/bin:/usr/sbin:/usr/bin:"
OPT=""
. /etc/udev/udev.conf
# remo... | Shell |
#!/bin/sh
# rc.usb: search for USB devices needed for installation.
#
# Taken from slackware 12, here for reference
# This is a function to unload the USB modules:
usb_stop() {
modprobe -r usb-storage keybdev mousedev usbmouse hid usbkbd \
input uhci usb-uhci usb-ohci uhci-hcd ohci-hcd ehci-hcd 2> /dev/null
um... | Shell |
#!/bin/bash
PATH=/bin:/usr/bin:/sbin:/usr/sbin:.
export PATH
HOME=/root
export HOME
/bin/echo "/init ...."
/bin/hostname nemonico
# Mount
/bin/mount -v proc /proc -n -t proc
/bin/mount -v sysfs /sys -n -t sysfs
#/bin/mount -t tmpfs -o size=64M mdev /dev
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts
ln -s /pro... | Shell |
#!/bin/bash
PATH=/bin:/usr/bin:/sbin:/usr/sbin:.
export PATH
HOME=/root
export HOME
/bin/echo "/init ...."
/bin/hostname nemonico
# Mount
/bin/mount -v proc /proc -n -t proc
/bin/mount -v sysfs /sys -n -t sysfs
#/bin/mount -t tmpfs -o size=64M mdev /dev
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts
ln -s /pro... | Shell |
#!/bin/sh
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
. /etc/scripts/env
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
... | Shell |
#!/bin/sh
# $Id$
#
## Taken from OpenWRT Whiterussian RC5
RESOLV_CONF=/etc/resolv.conf
. /etc/scripts/env
case "$1" in
deconfig)
ifconfig $interface 0.0.0.0
;;
renew|bound)
ifconfig $interface $ip \
netmask ${subnet:-255.255.255.0} \
... | Shell |
#!/bin/sh
# rc.modules 12.1 Wed Mar 5 23:51:09 CST 2008 pp (rb), pjv
#
# This file loads extra drivers into the Linux kernel.
#
# The modules will be looked for under /lib/modules/<kernel version number>
# On systems using KMOD and hotplug or udev this file should remain mostly
# commented out. Nearly all hardware ... | Shell |
#!/bin/sh
#
# Taken from: http://fasmz.org/~pterjan/qemu-ifup
#
# Sample /etc/qemu-ifup to have bridged networking between qemu instances and your real net
# You need "youruser ALL=(root) NOPASSWD: /etc/qemu-ifup" in /etc/sudoers
# You also need enough rights on /dev/tun
if [ $UID -ne 0 ]
then
sudo $0 $1
exit
fi
/sbi... | Shell |
#! /bin/sh -
RCSID='$Id: MAKEDEV 2.3 1997/09/29 19:03:13 johnsonm Exp $'
#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#
# Customisation:
# The devices fall into various classes. This section contains the mapping
# from a class name into a group name and permission.
# You will almos... | Shell |
( cd etc/rc.d; cat rc.local.rng-tools.append >> rc.local )
( cd etc/rc.d; rm -f rc.local.rng-tools.append )
| Shell |
#!/bin/sh
NEMO_ROOT=${NEMO_ROOT:-/lib/nemo}
export NEMO_ROOT
if [ "`id -u`" = "0" ]; then
PATH=$NEMO_ROOT/bin:$PATH ; export PATH
fi
| Shell |
#!/bin/sh
NEMO_ROOT=${NEMO_ROOT:-/lib/nemo}
export NEMO_ROOT
if [ "`id -u`" = "0" ]; then
PATH=$NEMO_ROOT/bin:$PATH ; export PATH
fi
| Shell |
#!/bin/sh
#
# Taken from: http://fasmz.org/~pterjan/qemu-ifup
#
# Sample /etc/qemu-ifup to have bridged networking between qemu instances and your real net
# You need "youruser ALL=(root) NOPASSWD: /etc/qemu-ifup" in /etc/sudoers
# You also need enough rights on /dev/tun
if [ $UID -ne 0 ]
then
sudo $0 $1
exit
fi
/sbi... | Shell |
#! /bin/sh -
RCSID='$Id: MAKEDEV 2.3 1997/09/29 19:03:13 johnsonm Exp $'
#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#---#
# Customisation:
# The devices fall into various classes. This section contains the mapping
# from a class name into a group name and permission.
# You will almos... | Shell |
#!/bin/bash
# $Id$
tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
if [ -L /dev/cdrom ]; then
mount -o ro -t iso9660 /dev/cdrom $tmpmnt 2> /dev/null
if [ $? = 0 ]; then
echo /dev/cdrom > /var/tmp/cdrom_device
umount -f $tmpmnt 2>/dev/null
exit 0
fi
fi
for device in /dev/hd[a-z]; do
mount -o ro -t iso9660 $device ... | Shell |
#!/bin/bash
# $Id$
# desc: output /var/tmp/sd[a-z][0-9] as text file, in it desc and size
# of the device, and to stdout
export syspath=/sys/block
# ex. usblist="sda1 sdb"
export usblist=""
export tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
find_dev_m1 ()
{
for l in a b c d e f g h i j k l m n o p q r s t u v w x y z... | Shell |
#!/bin/bash
# $Id$
# desc: output /var/tmp/sd[a-z][0-9] as text file, in it desc and size
# of the device, and to stdout
export syspath=/sys/block
# ex. usblist="sda1 sdb"
export usblist=""
export tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
find_dev_m1 ()
{
for l in a b c d e f g h i j k l m n o p q r s t u v w x y z... | Shell |
#!/bin/bash
# $Id$
tmpmnt="`mktemp -d /tmp/tmp.XXXXXX`"
if [ -L /dev/cdrom ]; then
mount -o ro -t iso9660 /dev/cdrom $tmpmnt 2> /dev/null
if [ $? = 0 ]; then
echo /dev/cdrom > /var/tmp/cdrom_device
umount -f $tmpmnt 2>/dev/null
exit 0
fi
fi
for device in /dev/hd[a-z]; do
mount -o ro -t iso9660 $device ... | Shell |
#!/bin/bash
# $Id: MAKECD 716 2010-08-03 06:24:13Z ant_code $
set -eETa
set -o pipefail
. ./files/env
. ./files/buildscripts.fn
trap '_chk_err' INT HUP TERM ERR # not very usefull, but
export -f _chk_err
export wd=`pwd`
make_auxbuildroot ()
{
./bin/mk-dir-struct.sh
./bin/fetch-src
non_slackware_build # if build h... | Shell |
#!/bin/bash
# $Id$
set -eETa
set -o pipefail
. ./files/env
. ./files/buildscripts.fn
trap '_chk_err' INT HUP TERM ERR # not very usefull, but
export -f _chk_err
export wd=`pwd`
make_auxbuildroot ()
{
./bin/mk-dir-struct.sh
./bin/fetch-src
non_slackware_build # if build host is not slackware
./bin/build-auxbuildr... | Shell |
#!/bin/bash
# $Id: cp-slackware-sets.sh 636 2010-01-17 17:19:29Z ant_code $
wd="`pwd`"
. $wd/env
if [ "$UID" != "0" ]; then
echo "ERROR: must run as root"
exit 1
fi
echo ""
echo " For Slackware $slackware_version"
echo ""
echo " This script will copy all packages that appear listed in: "
echo " ./files/install... | Shell |
#!/bin/bash
# $Id: prepare_autoinstall.sh 717 2010-08-20 14:24:59Z ant_code $
wd=`pwd`
if [ -d $wd/files ]; then
. $wd/files/env
. $wd/files/common-scripts/common.fn
. $wd/files/common-scripts/common.disks.fn
. $wd/files/common-scripts/boot.fn
misc_files_dir=$wd/files/installcd-initrd/$misc_files_dir
else
. $(d... | Shell |
#!/bin/sh -e
# $Id: mk-pkglist-from-cksum.sh 636 2010-01-17 17:19:29Z ant_code $
wd="`pwd`"
time="`date "+%s"`"
tmp_pkglist="$(mktemp -d -p $wd/tmp pkglist.XXXXXX)"
. $wd/env
if [ ! -f "$1" ]; then
echo ""
echo -n " Enter path to the CHECKSUMS.md5 file: "
read cksum_file
fi
cksum_file=${1:-$cksum_file}
if [ -f "... | Shell |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.