Adding_a_static_route_in_Rubrik_cluster.md

# Adding a static route in Rubrik cluster

Source: https://docs.rubrik.com/en-us/latest/offrec/offrec/adding_routing_table_cluster_or.html

---

# Adding a static route in Rubrik cluster

Add a static route for a network destination in Rubrik cluster with other network details such as netmask, gateway, and interface for efficient network routing and better performance.

## About this task

You can view, delete, and add an IPv4 or IPv6 static route for a Rubrik cluster in the routing table for network efficiency, reliability, and performance.

## Procedure

  1. Log in to Rubrik cluster.
  2. Do one of the following:
     * Click Manage Cluster Settings.
     * Click and then click Cluster Settings.

Rubrik cluster displays the cluster information page.

  3. Select Network.

The Network tab provides details about the networks associated with the Rubrik cluster.

  4. Click Routing Table.
  5. Click Add Static Route.

The Add Static Route wizard appears.

  6. In Network Destination, enter the IP address for the destination network or host.
  7. In Netmask, enter the subnet mask of the destination network.
  8. In Interface, select a network interface for the static route from the dropdown list.
  9. In Gateway, enter a gateway for the static route.

Rubrik cluster fills the gateway if you select a VLAN interface that has an associated gateway. You can edit the gateway.

  10. Click Add.

## Results

Rubrik cluster adds the static route to the routing table with the static route details you specified.