input stringclasses 1
value | instruction stringlengths 237 1.8k | output stringlengths 234 336 | category stringclasses 1
value | index stringlengths 1 5 |
|---|---|---|---|---|
[ToolName]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/ToolName]
[Size]No.2[/Size]
[ToolOther]1.8N･m[/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞ部_配線①[/WorkName]
[WorkItem]2. 熱電対ｺﾈｸﾀを で固定する
■3. ｱｰｽ線を で固定する
■1. ﾍｯﾄﾞ側の配線配管を引き回し接続する[/WorkItem]
[WorkPoint]ｶｯﾄし2股ｼﾞｮｲﾝﾄの上側に接続[/WorkPoint]
[Tolk]1.8N･m[/Tolk]
[InspectionNo][/InspectionNo]
[Inspec... | [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]1.8N･m±10%[/StdVal]
[Method]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 400 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞ部_配線②[/WorkName]
[WorkItem]1. ﾍｯﾄﾞ先端部の吸着配管を接続する[/WorkItem]
[WorkPoint]ﾍｯﾄﾞ先端部(MHV軸)を手動でﾌﾙｽﾄﾛｰｸ回して配線配管の干渉が無いことを確認する[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/W... | [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 401 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞ部_配線③[/WorkName]
[WorkItem]■1. ｾﾝｻにCABLE を接続する
2. 1完成品の配線配管を引き回しする[/WorkItem]
[WorkPoint]仮引き回し:SD-A044667-065にて束線､接続[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-111[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 402 | |
[ToolName]ﾄﾙｸﾚﾝﾁ[/ToolName]
[Size]3㎜[/Size]
[ToolOther]3.2N･m[/ToolOther]
[WorkName]FRAME_Assy-8_ﾌﾛﾝﾄ側ﾌﾚｰﾑ取付/連結-2[/WorkName]
[WorkItem]1. へBRACKET をBOLT WASHER BOLT WASHER で取付[/WorkItem]
[WorkPoint]185.5mm
丸穴ｾﾝﾀｰ
丸穴ｾﾝﾀｰ[/WorkPoint]
[Tolk]3.6N･m
締付ﾄﾙｸ 3.6N･m
締付ﾄﾙｸ 3.2N･m
締付ﾄﾙｸ 3.2N･m[/Tolk]
[InspectionNo][/... | [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]3.2N･m±10%[/StdVal]
[Method]ﾄﾙｸﾚﾝﾁ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 403 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾊﾟﾈﾙ押さえ/ｲｵﾅｲｻﾞｰ_組込み[/WorkName]
[WorkItem]1. に を㉓BOLT で取付け、 をBOLT WASHER で取付ける[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 404 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾊﾟﾈﾙ押さえ/ｲｵﾅｲｻﾞｰ_配線[/WorkName]
[WorkItem]1. の1完成品の配線配管を引き回し接続する[/WorkItem]
[WorkPoint]矢視A
H-BOX
空圧部ﾌﾞﾗｹｯﾄの開口部を通して後部へ引き回し
仮引き回し:SD-A044467-064にて束線[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem]... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWXJ-5300-086[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 405 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_廃棄BOX部_配線[/WorkName]
[WorkItem]1. 廃棄BOK部の配線配管を引き回しする[/WorkItem]
[WorkPoint]空圧部の配管を廃棄BOKｼﾘﾝﾀﾞへ引き回し
仮引き回し:SD-A044467-065にて束線､接続
廃棄BOKｼﾘﾝﾀﾞ配線を上部へ引き回し[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem... | [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 406 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞﾍﾞｰｽ空圧部_配線[/WorkName]
[WorkItem]1. ﾍｯﾄﾞﾍﾞｰｽ空圧部の配線を引き回し接続する[/WorkItem]
[WorkPoint]矢視A
仮引き回し:SD-A044467-065にて束線､接続[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]ｲﾝｼｭ... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-111[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 407 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ｸﾘｰﾝｹｰﾌﾞﾙﾍｯﾄﾞﾍﾞｰｽ側_配線[/WorkName]
[WorkItem]1. ﾍｯﾄﾞﾍﾞｰｽ側の配線配管を引き回しする[/WorkItem]
[WorkPoint] ﾍｯﾄﾞ側ﾌﾞﾗｹｯﾄ裏図
矢視A
仮引き回し:SD-A044467-065にて束線､接続[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/Inspect... | [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 408 | |
[ToolName]ｺﾝﾍﾞｯｸｽ[/ToolName]
[Size]3㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞﾍﾞｰｽ部_配管[/WorkName]
[WorkItem]2. に1完成品を接続し引き回しする
3. 2完成品をｲﾝｼｭﾛｯｸで結束する
1. を下記の寸法にｶｯﾄする[/WorkItem]
[WorkPoint]A:1500㎜ 1本C: 360㎜ 1本E:1300㎜ 1本F: 230㎜ 1本G:1500㎜ 1本
D:1600㎜ 1本
B:1600㎜ 1本[/WorkPoint]
[Tolk][/To... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示寸法各±1㎜[/StdVal]
[Method]ｺﾝﾍﾞｯｸｽ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 409 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞﾍﾞｰｽ部_配管[/WorkName]
[WorkItem]2. に1完成品を接続し引き回しする
3. 2完成品をｲﾝｼｭﾛｯｸで結束する
1. を下記の寸法にｶｯﾄする[/WorkItem]
[WorkPoint]A:1500㎜ 1本C: 360㎜ 1本E:1300㎜ 1本F: 230㎜ 1本G:1500㎜ 1本
D:1600㎜ 1本
B:1600㎜ 1本[/WorkPoint]
[Tolk][/Tolk]
[In... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 410 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾘﾚｰｷｯﾄ_組込み[/WorkName]
[WorkItem]2. にRELAY RELAY-SOCKET をBOLT WASHER WASHER で取付ける
■1. RELAY RELAY-SOCKET の型式を確認し､ｼﾘｱﾙNoを検査表に記入する
■3. 2完成品リレーにCABLE CABLE CABLE CABLE を取付け、㉙で結束する[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]0.9... | [QualityItem]型式確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]型式が一致する事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-111[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 411 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾘﾚｰｷｯﾄ_組込み[/WorkName]
[WorkItem]2. にRELAY RELAY-SOCKET をBOLT WASHER WASHER で取付ける
■1. RELAY RELAY-SOCKET の型式を確認し､ｼﾘｱﾙNoを検査表に記入する
■3. 2完成品リレーにCABLE CABLE CABLE CABLE を取付け、㉙で結束する[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]0.9... | [QualityItem]製造番号記録[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]製造番号転記[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-111[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 412 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾘﾚｰｷｯﾄ_組込み[/WorkName]
[WorkItem]2. にRELAY RELAY-SOCKET をBOLT WASHER WASHER で取付ける
■1. RELAY RELAY-SOCKET の型式を確認し､ｼﾘｱﾙNoを検査表に記入する
■3. 2完成品リレーにCABLE CABLE CABLE CABLE を取付け、㉙で結束する[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]0.9... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-111[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 413 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]FRAME_Assy-8_ﾌﾛﾝﾄ側ﾌﾚｰﾑ取付/連結-2[/WorkName]
[WorkItem]1. へBRACKET をBOLT WASHER BOLT WASHER で取付[/WorkItem]
[WorkPoint]185.5mm
丸穴ｾﾝﾀｰ
丸穴ｾﾝﾀｰ[/WorkPoint]
[Tolk]3.6N･m
締付ﾄﾙｸ 3.6N･m
締付ﾄﾙｸ 3.2N･m
締付ﾄﾙｸ 3.2N･m[/Tolk]
[InspectionNo][/Inspec... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示寸法各±0.5㎜[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 414 | |
[ToolName]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/ToolName]
[Size]No.2[/Size]
[ToolOther]0.9N･m[/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾘﾚｰｷｯﾄ_組込み[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]0.9N･m[/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]■安全作業
検査表 :接続確認
検査表 :型式･ｼﾘｱﾙ･検査書ﾁｪｯｸ
ｲﾝ... | [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]0.9N･m±10%[/StdVal]
[Method]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 415 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞﾍﾞｰｽ部_配線[/WorkName]
[WorkItem]1. ｺﾈｸﾀﾌﾞﾗｹｯﾄにCABLE CABLE CABLE CABLE CABLE CABLE CABLE を取付け､引き回し結束する[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[W... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 416 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]仮圧着ﾍｯﾄﾞﾍﾞｰｽ:M_(逆流れ)_ﾍｯﾄﾞ部､ﾍｯﾄﾞﾍﾞｰｽ部_配線[/WorkName]
[WorkItem]2. ﾍｯﾄﾞ部､ﾍｯﾄﾞﾍﾞｰｽ部の配線配管を引き回し接続する
1. にCABLE を接続する
3. BOLT は2完成品に添付し次工程(本体ﾄﾞｯｷﾝｸﾞ)に引渡す[/WorkItem]
[WorkPoint]矢視A:MHV軸ﾓｰﾀｰ
矢視A:ｺﾈｸﾀﾌﾞﾗｹｯﾄ[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/... | [QualityItem]接続確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り接続出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-111[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 417 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ1[/WorkName]
[WorkItem]1. を で取付[/WorkItem]
[WorkPoint]寸法通り取付ける の合わせ面に隙間が無い事[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]271㎜
119㎜
119㎜[/Words]
| [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 418 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ2[/WorkName]
[WorkItem]1. に を で挟んで で取付[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 419 | |
[ToolName]てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ[/ToolName]
[Size][/Size]
[ToolOther]1/100[/ToolOther]
[WorkName]ﾌﾚｰﾑ3[/WorkName]
[WorkItem]1. を定盤上でN015ﾌﾚｰﾑ上面の高さを測定する[/WorkItem]
[WorkPoint]0.4㎜以内
P002の下面と定盤に隙間が無い事[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]検査表 :P(1軸)3 ｱﾙﾑﾌﾚｰﾑ高さ測定... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]1回/半年[/ToolCycle]
[ToolRecord]校正成績書[/ToolRecord]
[StdVal]寸法:0.4㎜以内[/StdVal]
[Method]てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ[/Method]
[RecordMethod]WWYJ-5300-46[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 420 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ4[/WorkName]
[WorkItem]1. に を で取付
2. に を で取付
3. 2.完成品に を取付
4. 3.完成品に を入れる
1. に を で取付
2. に を で取付
3. 2.完成品に を取付
4. 3.完成品に を入れる[/WorkItem]
[WorkPoint] は方向あり
の裏面に8個入れる
の表面に2個入れる位置は不問
は方向あり
の裏面に8個入れる
の表面に2個入れる... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 421 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]150㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]銘板貼付け1[/WorkName]
[WorkItem]1. にLABEL を貼付け[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]ﾒﾓﾘとの合わせ基準
ﾒﾓﾘとの合わせ基準[/Words]
| [QualityItem]貼付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 422 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]150㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]銘板貼付け2[/WorkName]
[WorkItem]1. にLABEL を貼付け[/WorkItem]
[WorkPoint]この範囲の貼付け寸法を明示右側も同じ[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]2㎜
5㎜
80㎜
5㎜
5㎜
230㎜
5㎜
5㎜
5㎜
2㎜
80㎜
230... | [QualityItem]貼付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 423 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]銘板貼付け3[/WorkName]
[WorkItem]1. にLABEL を貼付け
3. にLABEL お貼付け
4. に を取付ける
2. に を取付ける[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]23㎜
155㎜
32㎜
2㎜[/Words]... | [QualityItem]貼付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]寸法の位置に貼付けている事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 424 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]150㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]FRAME_Assy-9_ﾄﾘﾑ取付[/WorkName]
[WorkItem]1. にCOVER を取付ける[/WorkItem]
[WorkPoint]30㎜[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Words]
| [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示寸法±0.5㎜[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 425 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ﾊﾝﾄﾞﾊﾞﾙﾌﾞ1[/WorkName]
[WorkItem]1. を取付[/WorkItem]
[WorkPoint]8ｾｯﾄ制作[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 426 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ﾊﾝﾄﾞﾊﾞﾙﾌﾞ2[/WorkName]
[WorkItem]1. に を取付
2. に を で取付
1. に を取付[/WorkItem]
[WorkPoint] は方向あり
矢印方向に取付[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]10㎜[/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｺﾝﾍﾞｯｸｽ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 427 | |
[ToolName]治具[/ToolName]
[Size][/Size]
[ToolOther]FM-6046[/ToolOther]
[WorkName]搬送PAD組立①[/WorkName]
[WorkItem]1. に を仮取付(ﾅｯﾄは の付属品を使用)
2. 1.完成品を㉗搬送PAD高さ合わせジグに取付[/WorkItem]
[WorkPoint]16ｾｯﾄ製作[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]
WWYJ-5300-46[/Words]
... | [QualityItem]隙間確認[/QualityItem]
[ToolManageNo]FM-6046[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]29.8±0.1㎜[/StdVal]
[Method]治具[/Method]
[RecordMethod]WWYJ-5300-46[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 428 | |
[ToolName]ｼｯｸﾈｽｹﾞｰｼﾞ[/ToolName]
[Size]0.1㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]搬送PAD組立①[/WorkName]
[WorkItem]1. に を仮取付(ﾅｯﾄは の付属品を使用)
2. 1.完成品を㉗搬送PAD高さ合わせジグに取付[/WorkItem]
[WorkPoint]16ｾｯﾄ製作[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]
WWYJ-5300-46[/Wo... | [QualityItem]隙間確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]29.8±0.1㎜[/StdVal]
[Method]ｼｯｸﾈｽｹﾞｰｼﾞ[/Method]
[RecordMethod]WWYJ-5300-46[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 429 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]搬送PAD組立②[/WorkName]
[WorkItem]▲1. に の付属品をﾈｼﾞﾛｯｸ材で取付
▲2. 1.完成品に を取付け､ の上部に の付属品をﾈｼﾞﾛｯｸ材で取付 ｼﾞｮｲﾝﾄの向き注意[/WorkItem]
[WorkPoint]吸着穴に接着剤が混入し無い事
吸着穴に接着剤が混入し無い事
2ｾｯﾄ製作
4ｾｯﾄ製作
2ｾｯﾄ製作
下部ｼﾞｮｲﾝﾄと上部ｼﾞｮｲﾝﾄの向き違いがある3種類製作する[/WorkPoint]
[Tolk][/Tolk]
... | [QualityItem]接着量[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示箇所に塗布ｺﾞﾏ粒:2[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-46[/RecordMethod]
[Other]ﾛｯｸﾀｲﾄ243[/Other]
[ProcessName]特殊工程[/ProcessName] | information_extraction | 430 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]搬送PAD組立③[/WorkName]
[WorkItem]▲1. に の付属品をﾈｼﾞﾛｯｸ材で取付[/WorkItem]
[WorkPoint]吸着穴に接着剤が混入し無い事
8ｾｯﾄ製作[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]▲特殊作業
検査表 :AM2､ねじﾛｯｸ塗布
接着剤塗布 ｺﾞﾏ粒:2
の付属品(... | [QualityItem]接着量[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示箇所に塗布ｺﾞﾏ粒:2[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-46[/RecordMethod]
[Other]ﾛｯｸﾀｲﾄ243[/Other]
[ProcessName]特殊工程[/ProcessName] | information_extraction | 431 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]吸着ﾊﾝﾄﾞ組立1[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]210㎜
210㎜[/Words]
| [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]寸法:210.0㎜±0.5㎜[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 432 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]吸着ﾊﾝﾄﾞ組立2[/WorkName]
[WorkItem]1. を に で取付[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]85㎜[/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 433 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]吸着ﾊﾝﾄﾞ組立3[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]5㎜
110㎜
110㎜
40㎜
40㎜
194㎜[/Words]
| [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]寸法:85.0㎜±0.5㎜[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 434 | |
[ToolName]ｺﾝﾍﾞｯｸｽ[/ToolName]
[Size]3.5m[/Size]
[ToolOther][/ToolOther]
[WorkName]吸着ﾊﾝﾄﾞ組立4[/WorkName]
[WorkItem]2. に1.完成品と を取付
3. 各配管を㉘で固定
1. ㉖配管を所定の長さに切断[/WorkItem]
[WorkPoint]･150㎜･･･4本･460㎜･･･4本[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]φ4白 150㎜[/... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｺﾝﾍﾞｯｸｽ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 435 | |
[ToolName]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/ToolName]
[Size]3㎜[/Size]
[ToolOther]194cN･m[/ToolOther]
[WorkName]FRAME_Assy-10_ｺﾞﾐ箱取付[/WorkName]
[WorkItem]1. GUIDE へBOLT WASHER SPACER を通しWASHER NUT で取付
2. に作業1の完成品をBOLT WASHER で取付[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]194cN･m
締付ﾄﾙｸ 3.2N･m[/Tolk]
[InspectionNo][/InspectionNo]
[Ins... | [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]194cN･m±10%[/StdVal]
[Method]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 436 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]吸着ﾊﾝﾄﾞ組立5[/WorkName]
[WorkItem]▲1. に㉖を塗布し に取付[/WorkItem]
[WorkPoint] の中央部2本の爪は㉘で切断する[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]検査表 :2,接着剤塗布
▲特殊作業
接着剤塗布 小豆:2
WWYJ-5300-46[/Words]
| [QualityItem]接着量[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示箇所に塗布小豆:2[/StdVal]
[Method]目視[/Method]
[RecordMethod]WWYJ-5300-46[/RecordMethod]
[Other]ﾛｯｸﾀｲﾄ415[/Other]
[ProcessName]特殊工程[/ProcessName] | information_extraction | 437 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]次工程へ引き渡し[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1. を次工程へ｡[/Words]
| [QualityItem]引き渡し部材確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]正しい部材が引き渡される事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 438 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]300㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ組立縦①[/WorkName]
[WorkItem]1. FRAME にBRACKET をBOLT ･WASHER ･NUT ･SUPPORT で取付
2. FRAME にBRACKET をBOLT ･WASHER ･NUT ･SUPPORT で取付
1. FRAME にBRACKET をBOLT ･WASHER ･NUT ･SUPPORT で取付
2. FRAME にBRACKET をBOLT ･WASHER ･NUT ･SUPPORT で取付[/Work... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 439 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]600㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ組立縦②[/WorkName]
[WorkItem]2. にNUT ･SUPPORT ･NUT ･を取付
3. にSUPPORT ･NUT を取付
1. にSUPPORT ･NUT を取付
4. 2.完成品の内1個の裏面にCABLE-SUPPORT を取付
2. にNUT ･SUPPORT ･NUT ･を取付
3. にSUPPORT ･NUT を取付
1. にSUPPORT ･NUT を取付
4. 2.完成品の内1個の裏面にCABLE-S... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 440 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]150㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ組立縦③[/WorkName]
[WorkItem]1. FRAME にSUPPORT ･NUT 挿入しBRACKET をBOLT ･WASHER で取付[/WorkItem]
[WorkPoint]左面
正面
下面
上面
上面[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]この作業では同じものを2個... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 441 | |
[ToolName]ｽｹｰﾙ[/ToolName]
[Size]150㎜[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ組立横①[/WorkName]
[WorkItem]1. FRAME にBRACKET をBOLT ･WASHER ･NUT ･SUPPORT で取付
2. FRAME にBRACKET をBOLT ･WASHER ･NUT ･SUPPORT で取付[/WorkItem]
[WorkPoint]左面
上面
正面
下面
正面
下面
正面
下面
端面合わせで取付
端面合わせで取付[/WorkPoint]
[Tolk][/Tolk]
[Insp... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｽｹｰﾙ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 442 | |
[ToolName]ｺﾝﾍﾞｯｸｽ[/ToolName]
[Size]3m[/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ組立横②[/WorkName]
[WorkItem]1. にNUT SUPPORT ⑤NUT を取付
2. にNUT SUPPORT ⑤NUT を取付
3. にNUT SUPPORT ⑤を取付
1. にNUT SUPPORT ⑤NUT を取付
2. にNUT SUPPORT ⑤NUT を取付
3. にNUT SUPPORT ⑤を取付
1. にNUT SUPPORT ⑤NUT を取付
2. にNUT SUPPORT ⑤NUT を取付
... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｺﾝﾍﾞｯｸｽ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 443 | |
[ToolName]ｺﾝﾍﾞｯｸｽ[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ﾌﾚｰﾑ組立UPPER[/WorkName]
[WorkItem]1. ･ ･ ･ をBOLT ･ で取付
2. 1.完成品にWASHER を取付[/WorkItem]
[WorkPoint]左側
上面で組立する事
上面
裏面
左側
裏面に取付する事[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Wo... | [QualityItem]寸法確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]作業指示の寸法である事[/StdVal]
[Method]ｺﾝﾍﾞｯｸｽ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 444 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]HEPA大組立[/WorkName]
[WorkItem]2. BOLT ・WASHER を㉘に入れマスキングテープで止め同梱
1. BLOWER の取付ﾌﾞﾗｹｯﾄをBRACKET と交換する[/WorkItem]
[WorkPoint]4ヶ所
交換したﾌﾞﾗｹｯﾄは廃棄
交換前と反対で下面を合わせて固定する
BRACKET の曲げが下側
下面を合わせる[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
... | [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 445 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]HEPA小組立[/WorkName]
[WorkItem]2. BOLT ・WASHER を㉘に入れマスキングテープで止め同梱
1. BLOWER の取付ﾌﾞﾗｹｯﾄをBRACKET と交換する[/WorkItem]
[WorkPoint]4ヶ所
交換したﾌﾞﾗｹｯﾄは廃棄
交換前と反対で下面を合わせて固定する
BRACKET の曲げが下側
下面を合わせる[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
... | [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 446 | |
[ToolName]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/ToolName]
[Size]T20[/Size]
[ToolOther]200cN･m[/ToolOther]
[WorkName]安全ｽｲｯﾁ部組立③[/WorkName]
[WorkItem]1. BRACKET に をBOLT WASHER で取付ける[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]300cN･m[/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Words]
| [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]200cN･m±10%[/StdVal]
[Method]ﾄﾙｸﾄﾞﾗｲﾊﾞｰ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 447 | |
[ToolName]ﾄﾙｸﾚﾝﾁ[/ToolName]
[Size]3㎜[/Size]
[ToolOther]3.2N･m[/ToolOther]
[WorkName]FRAME_Assy-10_ｺﾞﾐ箱取付[/WorkName]
[WorkItem]1. GUIDE へBOLT WASHER SPACER を通しWASHER NUT で取付
2. に作業1の完成品をBOLT WASHER で取付[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]194cN･m
締付ﾄﾙｸ 3.2N･m[/Tolk]
[InspectionNo][/InspectionNo]
[Inspecti... | [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]3.2N･m±10%[/StdVal]
[Method]ﾄﾙｸﾚﾝﾁ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 448 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ｸﾞﾛﾒｯﾄ加工[/WorkName]
[WorkItem]1. GROMMET に切り込みを入れる[/WorkItem]
[WorkPoint]切り込み[/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]この作業では同じものを4個製作[/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 449 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾏｸﾞﾈｯﾄ取付け[/WorkName]
[WorkItem]1. ﾊｰﾈｽﾎﾞｰﾄﾞにﾏｸﾞﾈｯﾄを取付ける[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]⇒ﾏｸﾞﾈｯﾄ中
⇒ﾏｸﾞﾈｯﾄ大[/Words]
| [QualityItem]取付確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り取付出来ている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 450 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ﾊｰﾈｽ準備1[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1.下記ﾘｽﾄの順番でｹｰﾌﾞﾙを準備する[/Words]
| [QualityItem]ｹｰﾌﾞﾙの準備[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り準備する事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 451 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]ﾊｰﾈｽ準備2[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1.下記ﾘｽﾄの順番でｹｰﾌﾞﾙを準備する
Kit品番MTKA045136AE[/Words]
| [QualityItem]ｹｰﾌﾞﾙの準備[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り準備する事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 452 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]付属品準備[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1.下記ﾘｽﾄで付属品を準備する[/Words]
| [QualityItem]ｹｰﾌﾞﾙの準備[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り準備する事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 453 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回1[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1/3/5aF1508
1aV001
2aV001
3aV001
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 454 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回2[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1bV001
2bV001
3bV001
1/2/3aX1601
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 455 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回3[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1X002
16X0500
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 456 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回4[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]7X006
16X0501
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 457 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回5[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]72X1500/73X1500/74X1500/29X1500/40X1500/51X1500
11X1001/12X1001/13X1001/5... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 458 | |
[ToolName]ﾄﾙｸﾚﾝﾁ[/ToolName]
[Size]6㎜[/Size]
[ToolOther]20.5N･m[/ToolOther]
[WorkName]FRAME_Assy-11_連結部取付[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]20.5N･m[/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]◆作業者安全作業[/Words]
| [QualityItem]締付ﾄﾙｸ[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]日常点検(1回/日)[/ToolCycle]
[ToolRecord]ﾄﾙｸﾁｪｯｸ台帳[/ToolRecord]
[StdVal]20.5N･m±10%[/StdVal]
[Method]ﾄﾙｸﾚﾝﾁ[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]作業者安全工程[/ProcessName] | information_extraction | 459 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回6[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]7X009
E1K4106
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 460 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回7[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]6X009
E1K4105
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 461 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回8[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]5X009
E1K4109
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 462 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回9[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1X003
E1K4112
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 463 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回10[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]75X1500/76X1500/77X1500/26X1500/37X1500/48X1500
11X1002/12X1002/13X1002/... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 464 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回11[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]1X009
E1K4110
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 465 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回12[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]3X009
E1K4108
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 466 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回13[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]8X004
E1K4114
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 467 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回14[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]12/16/23X1500
ACINA101
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 468 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回15[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]35/46/22X1500
ACINA004
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 469 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]FRAME_Assy-11_連結部取付[/WorkName]
[WorkItem]2. 1完成品に をBOLT WASHER で取付ける
◆1. に 取付け面にｸﾞﾘｰｽを塗布する[/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk]20.5N･m[/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]ｸﾞﾘｰｽ塗布 小豆:各1
◆作業... | [QualityItem]型式確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]型式が一致している事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 470 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回16[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]16X006
2X002
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 471 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回17[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]9X002
16X004
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 472 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回18[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]11X002
16X009
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 473 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回19[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]6X002
4X010
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 474 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回20[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]60X1500/62X1500/64X1500/27X1500/49X1500
XAK4101/XAK4401
1. CABLE を引き回す[... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 475 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回21[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]4X009
E1K4107
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 476 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回22[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]2X009
E1K4111
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 477 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回23[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]15X002
16X003
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 478 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回24[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]61X1500/63X1500/65X1500/28X1500/50X1500
XAK4102
1. CABLE を引き回す[/Words]
... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 479 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回25[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]3X003
E1K4102
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 480 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther]LCG100[/ToolOther]
[WorkName]FRAME_Assy-11_連結部取付[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words][/Words]
| [QualityItem]塗布量[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示箇所に小豆粒:各1[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]ｸﾞﾘｰｽLCG100[/Other]
[ProcessName]作業者安全工程[/ProcessName] | information_extraction | 481 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回26[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]78X1500/79X1500/80X1500/30X1500/41X1500/52X1500
11X1003/12X1003/13X1003/... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 482 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回27[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]61X1001/62X1001/63X1001/21X1001/23X1001
XAK4114XAK4115XAK4113
XAK4117/X... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 483 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回28[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]81X1001/82X1001/83X1001/41X1001/43X1001
XAK4112
1. CABLE を引き回す[/Words]
... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 484 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回29[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]71X1001/72X1001/73X1001/31X1001/33X1001
XAK4130/XAK4131
1. CABLE を引き回す[... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 485 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回30[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]61X1003/62X1003/63X1003/22X1003/23X1003
XAK4128/XAK4129/XAK4127
XAK4123... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 486 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回31[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]81X1003/82X1003/83X1003/42X1003/43X1003
XAK4126
1. CABLE を引き回す[/Words]
... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 487 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回32[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]71X1003/72X1003/73X1003/32X1003/33X1003
XAK4122
1. CABLE を引き回す[/Words]
... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 488 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回33[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]61X1002/62X1002/63X1002/21X1002/22X1002
XAK4111XAK4110XAK4108
XAK4109XA... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 489 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回34[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]120X1600/112X1600/1bX1601/2bX1601/3bX1601
P1ACP
1. CABLE を引き回す[/Words]
... | [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 490 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回35[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]7X004
E1K4115
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 491 | |
[ToolName]-[/ToolName]
[Size][/Size]
[ToolOther][/ToolOther]
[WorkName]制御BOXﾌｪﾗｲﾄｺｱ取付[/WorkName]
[WorkItem]1. のｲﾝｼｭﾛｯｸをｶｯﾄする
3. 1完成品にNOISE-FILTER を取付け､配線を固定する
■2. NOISE-FILTER の型式を確認する[/WorkItem]
[WorkPoint]動力線以外の配線を右側のｽﾍﾟｰｻｰで固定する
CN3K402:TP軸動力線
CN3K401:TL軸動力線
この部分の型式を確認する[/WorkPoint]
[Tolk][/Tolk]
[Inspec... | [QualityItem]型式確認[/QualityItem]
[ToolManageNo]-[/ToolManageNo]
[ToolCycle]-[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]型式が一致している事[/StdVal]
[Method]目視[/Method]
[RecordMethod]WEMA-G002-D06[/RecordMethod]
[Other]-[/Other]
[ProcessName]安全工程[/ProcessName] | information_extraction | 492 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回36[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]9X004
E1K4113
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 493 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回37[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]5X003
E1K4128
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 494 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回38[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]6X003
E1K4129
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 495 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回39[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]4X003
E1K4127
1. を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 496 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回40[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]8X003
E1K4124
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 497 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回41[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]7X003
E1K4125
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 498 | |
[ToolName]ﾊｰﾈｽﾎﾞｰﾄﾞ[/ToolName]
[Size][/Size]
[ToolOther]FM-6479[/ToolOther]
[WorkName]ﾊｰﾈｽ引き回42[/WorkName]
[WorkItem][/WorkItem]
[WorkPoint][/WorkPoint]
[Tolk][/Tolk]
[InspectionNo][/InspectionNo]
[InspectionItem][/InspectionItem]
[Words]9X003
E1K4123
1. CABLE を引き回す[/Words]
| [QualityItem]配線確認[/QualityItem]
[ToolManageNo]FM-6479[/ToolManageNo]
[ToolCycle]校正対象外[/ToolCycle]
[ToolRecord]-[/ToolRecord]
[StdVal]指示通り配線されている事[/StdVal]
[Method]目視[/Method]
[RecordMethod]-[/RecordMethod]
[Other]-[/Other]
[ProcessName]-[/ProcessName] | information_extraction | 499 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.