Datasets:
ayuzawa
/
ManageProcess19

Dataset card Data Studio Files
xet
Community
1
input
stringclasses
1 value
instruction
stringlengths
222
1.92k
output
stringlengths
193
312
category
stringclasses
1 value
index
stringclasses
1 value
fileName
null
{ "ToolName": "NPM-GHｴｱ配管ﾎﾞｰﾄﾞ", "Size": "", "ToolOther": "FM-5855", "WorkName": "配管ﾊｰﾈｽ制作⑬", "WorkItems": [ "1. を引き回す" ], "WorkPoints": [ "S(始点)を基準にG(終点)まで引き回す事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "203S(φ6黒)", "203G(φ6黒)", "205S(φ6黒)", "205G(φ6黒)" ] }
{ "QualityItem": "引き回確認", "ToolManageNo": "FM-5855", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り引き回出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "NPM-GHｴｱ配管ﾎﾞｰﾄﾞ", "Size": "", "ToolOther": "FM-5855", "WorkName": "配管ﾊｰﾈｽ制作⑭", "WorkItems": [ "1. を引き回す" ], "WorkPoints": [ "S(始点)を基準にG(終点)まで引き回す事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "208S(φ6黒)", "208G(φ6黒)", "204S(φ6黒)", "204G(φ6黒)" ] }
{ "QualityItem": "引き回確認", "ToolManageNo": "FM-5855", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り引き回出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "NPM-GHｴｱ配管ﾎﾞｰﾄﾞ", "Size": "", "ToolOther": "FM-5855", "WorkName": "配管ﾊｰﾈｽ制作⑮", "WorkItems": [ "1. を引き回す" ], "WorkPoints": [ "S(始点)を基準にG(終点)まで引き回す事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "501G(φ8黒)503G(φ8黒)502G(φ8黒)", "502S(φ8黒)", "503S(φ8黒)", "501S(φ8黒)" ] }
{ "QualityItem": "引き回確認", "ToolManageNo": "FM-5855", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り引き回出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "NPM-GHｴｱ配管ﾎﾞｰﾄﾞ", "Size": "", "ToolOther": "FM-5855", "WorkName": "配管ﾊｰﾈｽ制作⑯", "WorkItems": [ "1. 配管を整え､結束する" ], "WorkPoints": [ "矢印の順に結束する事", "結束及びCABLE-SUPPORT 取付位置はﾊｰﾈｽ板を参照" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ｲﾝｼｭﾛｯｸ指示", "･ｹｰﾌﾞﾙ同士を固定", "･ﾀｲﾏｳﾝﾄに固定 又は板金に固定" ] }
{ "QualityItem": "結束確認", "ToolManageNo": "FM-5855", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り結束出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "NPM-GHｴｱ配管ﾎﾞｰﾄﾞ", "Size": "", "ToolOther": "FM-5855", "WorkName": "配管ﾊｰﾈｽ制作⑰", "WorkItems": [ "1. 配管を整え､結束する" ], "WorkPoints": [ "結束及びCABLE-SUPPORT 取付位置はﾊｰﾈｽ板を参照", "矢印の順に結束する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ｲﾝｼｭﾛｯｸ指示", "･ｹｰﾌﾞﾙ同士を固定", "･ﾀｲﾏｳﾝﾄに固定 又は板金に固定" ] }
{ "QualityItem": "結束確認", "ToolManageNo": "FM-5855", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り結束出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "NPM-GHｴｱ配管ﾎﾞｰﾄﾞ", "Size": "", "ToolOther": "FM-5855", "WorkName": "配管ﾊｰﾈｽ制作⑱", "WorkItems": [ "1. 配管を整え､ﾏﾆﾎｰﾙﾄﾞに接続する", "2. 配管を整え､ﾏﾆﾎｰﾙﾄﾞに接続する", "3. 配管を整え､ﾏﾆﾎｰﾙﾄﾞに接続する" ], "WorkPoints": [ "接続はﾊｰﾈｽ板を参照", "接続順番;207⇒502⇒503⇒501⇒504", "接続はﾊｰﾈｽ板を参照", "接続順番;204⇒202⇒206⇒209", "接続はﾊｰﾈｽ板を参照", "接続順番;203⇒201⇒205⇒208" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "接続確認", "ToolManageNo": "FM-5855", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り接続出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "JOINT組立(XY軸ﾍﾞｱ配管)", "WorkItems": [ "1. JOINT JOINT CABLE-SUPPORT を㉖で束ねる" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作", "ｲﾝｼｭﾛｯｸ指示", "･ｹｰﾌﾞﾙ同士を固定", "･ﾀｲﾏｳﾝﾄに固定 又は板金に固定" ] }
{ "QualityItem": "接続確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り接続出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "真空ﾌｨﾙﾀｰ組立①", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "継手を外す", "28~29㎜※緩める方向に調整禁止" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "28~29㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "真空ﾌｨﾙﾀｰ組立②", "WorkItems": [ "1. へJOINT JOINT を取付ける", "2. 1の完成品へJOINT JOINT を取付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "4.5~5.5㎜※緩める方向に調整禁止", "22~23㎜※緩める方向に調整禁止" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "4.5~5.5㎜22~23㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｹﾞｰｼﾞ組立①", "WorkItems": [ "3. 2の完成品へｶﾊﾞｰを取付け､ｶﾊﾞｰﾘﾝｸﾞを付属の小ねじで固定する", "2. GAUGE GAUGE のﾘﾐｯﾄｲﾝｼﾞｹｰﾀ(緑)を設定する", "1. GAUGE GAUGE の小ねじを外し､ｶﾊﾞｰﾘﾝｸﾞ及びｶﾊﾞｰを取り外す" ], "WorkPoints": [ "ｹﾞｰｼﾞの設定目盛りの外側に調整", "上部凹みとｶﾊﾞｰ合わせﾏｰｸが合った事を確認する事", "指針折り曲げ､目盛版に傷を付けないよう注意する事" ], "Tolks": [ "締付ﾄﾙｸ 60cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "GAUGE 清掃ﾌﾞﾛｰ圧設定値:0.13~0.14MPa", "GAUGE 台車ｴｱ圧 設定値:0.4MPa" ] }
{ "QualityItem": "設定作業", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "No.2", "ToolOther": "60cN･m", "WorkName": "ｹﾞｰｼﾞ組立①", "WorkItems": [], "WorkPoints": [ "ｹﾞｰｼﾞの設定目盛りの外側に調整", "上部凹みとｶﾊﾞｰ合わせﾏｰｸが合った事を確認する事" ], "Tolks": [ "締付ﾄﾙｸ 60cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "GAUGE 清掃ﾌﾞﾛｰ圧設定値:0.13~0.14MPa", "GAUGE 台車ｴｱ圧 設定値:0.4MPa" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "60cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ｹﾞｰｼﾞ組立②", "WorkItems": [ "2. 1の完成品へJOINT を取付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "24~25㎜25~26㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸｽﾊﾟﾅ", "Size": "7㎜", "ToolOther": "90cN･m", "WorkName": "圧力ｾﾝｻ組立", "WorkItems": [ "1. SENSOR へJOINT をSENSOR へJOINT を取付ける", "2. 1の完成品へSENSOR SENSOR の付属品を取付ける" ], "WorkPoints": [ "割れに注意してﾂﾒ4箇所挿入" ], "Tolks": [ "締付ﾄﾙｸ 90cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "SENSOR 型式:DP-001Z", "付属品(黒枠)※ﾓﾆﾀｰ面から挿入", "SENSOR 型式:DP-002Z" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "90cN･m±10%", "Method": "ﾄﾙｸｽﾊﾟﾅ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸｽﾊﾟﾅ", "Size": "24㎜", "ToolOther": "15.0N･m", "WorkName": "真空ﾌｨﾙﾀｰ取付", "WorkItems": [ "1. BRACKET へ を取付ける", "2. 1の完成品へJOINT を取付ける" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 15.0N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ﾌﾞﾗｹｯﾄ端面とﾌｨﾙﾀｰｺｰﾅｰを合わせる事", "付属ﾅｯﾄ", "継手は下に向ける" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "15.0N･m±10%", "Method": "ﾄﾙｸｽﾊﾟﾅ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｹﾞｰｼﾞ取付ｼﾞｸﾞ", "Size": "", "ToolOther": "FM-2879", "WorkName": "ｹﾞｰｼﾞ取付", "WorkItems": [ "1. へ ⇒ ⇒ の順に取付ける" ], "WorkPoints": [ " の凹部(位置決め)と の凸部を合わせる事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "負圧ｹﾞｰｼﾞ 範囲:-100~0KPa", "正圧ｹﾞｰｼﾞ 範囲:0~0.2MPa", "正圧ｹﾞｰｼﾞ 範囲:0~1MPa" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "FM-2879", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り取付け出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "194cN･m", "WorkName": "圧力ｾﾝｻ取付", "WorkItems": [ "1. へ を (付属品)で取付ける", "2. 1の完成品へBRACKET をNUT BOLT WASHER で取付ける" ], "WorkPoints": [ "NG:挿入不完全", "OK" ], "Tolks": [ "締付ﾄﾙｸ 194cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "型式:DP-001Z", "型式:DP-002Z", "付属品(白枠)", "4mm", "5mm" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "194cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "圧力ｾﾝｻ取付", "WorkItems": [ "1. へ を (付属品)で取付ける", "2. 1の完成品へBRACKET をNUT BOLT WASHER で取付ける" ], "WorkPoints": [ "NG:挿入不完全", "OK" ], "Tolks": [ "締付ﾄﾙｸ 194cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "型式:DP-001Z", "型式:DP-002Z", "付属品(白枠)", "4mm", "5mm" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "600㎜", "ToolOther": "", "WorkName": "配管接続", "WorkItems": [ "1. TUBE TUBE を下記表の長さに切断する", "2. へTUBE TUBE を接続する" ], "WorkPoints": [ "両端より約50㎜に配管番号を記入する事 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1.0㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "配管接続", "WorkItems": [ "1. TUBE TUBE を下記表の長さに切断する", "2. へTUBE TUBE を接続する" ], "WorkPoints": [ "両端より約50㎜に配管番号を記入する事 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "接続確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り接続出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾚｷﾞｭﾚｰﾀAR20締付治具", "Size": "", "ToolOther": "FM-2217", "WorkName": "ﾚｷﾞｭﾚｰﾀ部組立①", "WorkItems": [ "1. BRACKET にREGULATOR REGULATOR を取付ける" ], "WorkPoints": [ "BRACKET の凹部(位置決め)とREGULATOR REGULATOR の凸部を合わせる事" ], "Tolks": [ "締付ﾄﾙｸ 3.6N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "取付確認", "ToolManageNo": "FM-2217", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り取付け出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾚﾝﾁ", "Size": "5㎜", "ToolOther": "3.6N･m", "WorkName": "ﾚｷﾞｭﾚｰﾀ部組立①", "WorkItems": [ "1. BRACKET にREGULATOR REGULATOR を取付ける" ], "WorkPoints": [ "BRACKET の凹部(位置決め)とREGULATOR REGULATOR の凸部を合わせる事" ], "Tolks": [ "締付ﾄﾙｸ 3.6N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "3.6N･m±10%", "Method": "ﾄﾙｸﾚﾝﾁ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸｽﾊﾟﾅ", "Size": "17㎜", "ToolOther": "11N･m", "WorkName": "ﾚｷﾞｭﾚｰﾀ部組立②", "WorkItems": [ "1. にREGULATOR を取付ける" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 11N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "A矢視図" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "11N･m±10%", "Method": "ﾄﾙｸｽﾊﾟﾅ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ﾚｷﾞｭﾚｰﾀ部組立②", "WorkItems": [ "2. 1の完成品のｴｱｰ圧(出代)を調整し､ﾛｯｸする" ], "WorkPoints": [ "平行に取付" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "A矢視", "付属ﾜｯｼｬｰ※ｴｯｼﾞ下向き", "付属ﾅｯﾄ", "33㎜", "付属ﾅｯﾄ" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "1000㎜", "ToolOther": "", "WorkName": "ﾚｷﾞｭﾚｰﾀ部組立③", "WorkItems": [ "1. TUBE TUBE を下記表の長さに切断､ﾏｰｷﾝｸﾞする", "2. 1の完成品を へ接続し､配管を束ねる" ], "WorkPoints": [ "両端より約50㎜に配管番号を記入する事 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用", "ﾏｰｷﾝｸﾞ測定側を接続する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ﾏｰｷﾝｸﾞ箇所を合わせる" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1.0㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ﾚｷﾞｭﾚｰﾀ部組立③", "WorkItems": [ "1. TUBE TUBE を下記表の長さに切断､ﾏｰｷﾝｸﾞする", "2. 1の完成品を へ接続し､配管を束ねる" ], "WorkPoints": [ "両端より約50㎜に配管番号を記入する事 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用", "ﾏｰｷﾝｸﾞ測定側を接続する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ｲﾝｼｭﾛｯｸ指示", "･ｹｰﾌﾞﾙ同士を固定", "･ﾀｲﾏｳﾝﾄに固定 又は板金に固定", "ﾏｰｷﾝｸﾞ箇所を合わせる", "150㎜" ] }
{ "QualityItem": "接続確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り接続出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸｽﾊﾟﾅ", "Size": "17㎜", "ToolOther": "11N･m", "WorkName": "交換台車用ﾌﾞﾗｹｯﾄ組立", "WorkItems": [ "2. 1の完成品へTUBE を下記表の長さに切断し､接続する", "1. BRACKET へJOINT を取付ける" ], "WorkPoints": [ "ﾌﾛﾝﾄ用､ﾘｱ用を識別する事", "両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用" ], "Tolks": [ "締付ﾄﾙｸ 11N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作", "A矢視" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "11N･m±10%", "Method": "ﾄﾙｸｽﾊﾟﾅ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "交換台車用ﾌﾞﾗｹｯﾄ組立", "WorkItems": [ "2. 1の完成品へTUBE を下記表の長さに切断し､接続する", "1. BRACKET へJOINT を取付ける" ], "WorkPoints": [ "ﾌﾛﾝﾄ用､ﾘｱ用を識別する事", "両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用" ], "Tolks": [ "締付ﾄﾙｸ 11N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作", "A矢視" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "交換台車用ﾌﾞﾗｹｯﾄ組立", "WorkItems": [ "2. 1の完成品へTUBE を下記表の長さに切断し､接続する", "1. BRACKET へJOINT を取付ける" ], "WorkPoints": [ "ﾌﾛﾝﾄ用､ﾘｱ用を識別する事", "両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用" ], "Tolks": [ "締付ﾄﾙｸ 11N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作", "10mm", "A矢視", "A矢視図", "ﾌﾛﾝﾄ用", "ﾘｱ用" ] }
{ "QualityItem": "接続確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り接続出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "前面下ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立", "WorkItems": [ "1. SHEET へTAPE を貼付け､SHEET と同じ長さでTAPE を切断する", "2. 1の完成品をBRACKET へ貼付ける", "3. 2の完成品にSPACER をBOLT NUT で取付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを4個製作", "2.5㎜" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾚﾝﾁ", "Size": "3㎜", "ToolOther": "3.2N･m", "WorkName": "前面下ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立", "WorkItems": [], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 3.2N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "1.5㎜", "切断", "端面合わせ" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "3.2N･m±10%", "Method": "ﾄﾙｸﾚﾝﾁ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "300㎜", "ToolOther": "", "WorkName": "JOINT組立(X軸)", "WorkItems": [ "1. JOINT へTUBE TUBE を接続する", "2. JOINT へTUBE TUBE を接続する" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通りの寸法で取付け出来ている事", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ｶﾞｲﾄﾞ組立", "WorkItems": [ "1. BUSH BUSH BUSH を指定の長さに切断する", "2. 1の完成品をGUIDE へ貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1.0㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｶﾞｲﾄﾞ組立", "WorkItems": [ "1. BUSH BUSH BUSH を指定の長さに切断する", "2. 1の完成品をGUIDE へ貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "端面合わせ", "この作業では同じものを2個製作", "端面合わせ", "端面合わせ" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り取付出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ﾌﾞﾗｹｯﾄ組立", "WorkItems": [ "1. COVER COVER BUSH を指定の長さに切断する", "2. 1の完成品をBRACKET へ貼付ける", "1. COVER COVER BUSH を指定の長さに切断する", "2. 1の完成品をBRACKET へ貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作", "2.5mm", "この作業では同じものを2個製作", "2.5mm" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ﾌﾞﾗｹｯﾄ組立", "WorkItems": [ "1. COVER COVER BUSH を指定の長さに切断する", "2. 1の完成品をBRACKET へ貼付ける", "3. 1の完成品をBRACKET へ貼付ける", "4. 2の完成品へ3の完成品をBOLT で取付ける" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "この作業では同じものを2個製作", "2.5mm", "3mm", "ｴｯｼﾞｶﾊﾞｰの角と角を合わせる", "切り欠き", "5mm", "ﾌﾞﾗｹｯﾄC面の角に合わせる", "切り欠き", "取付け方向に注意!この部品には方向性があります｡", "取付け方向に注意!この部品には方向性があります｡", "取付け方向に注意!この部品には方向性があります｡" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り取付出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2㎜", "ToolOther": "95cN･m", "WorkName": "ﾌﾞﾗｹｯﾄ組立", "WorkItems": [], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "切り欠き", "切り欠き" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "95cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "Y軸ﾍﾞｱﾀﾞｸﾄ組立", "WorkItems": [ "▲◆2. 1の完成品にWASHER を貼付ける", "1. DUCT へSHEET を貼付ける" ], "WorkPoints": [ "ﾀﾞｸﾄ端面に合わせ貼付ける事", "丸穴端面に合わせ貼付ける事", "溶接ﾅｯﾄ穴ｾﾝﾀｰに合わせ貼付ける事", "溶接ﾅｯﾄ穴に接着剤が入ら無い事", "ﾀﾞｸﾄ端面に合わせる", "丸穴端面に合わせる", "丸穴端面に合わせる", "丸穴端面に合わせる" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "溶接ﾅｯﾄ穴のｾﾝﾀｰに合わせる", "この作業では同じものを2個製作", "接着剤塗布 ｺﾞﾏ粒:各1" ] }
{ "QualityItem": "接着量", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "ｺﾞﾏ粒:各1", "Method": "目視", "RecordMethod": "-", "Other": "ﾛｯｸﾀｲﾄ415", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "Y軸ﾍﾞｱﾀﾞｸﾄ組立", "WorkItems": [ "▲◆2. 1の完成品にWASHER を貼付ける", "1. DUCT へSHEET を貼付ける" ], "WorkPoints": [ "ﾀﾞｸﾄ端面に合わせ貼付ける事", "丸穴端面に合わせ貼付ける事", "溶接ﾅｯﾄ穴ｾﾝﾀｰに合わせ貼付ける事", "溶接ﾅｯﾄ穴に接着剤が入ら無い事", "ﾀﾞｸﾄ端面に合わせる", "丸穴端面に合わせる", "丸穴端面に合わせる", "丸穴端面に合わせる" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "溶接ﾅｯﾄ穴のｾﾝﾀｰに合わせる", "この作業では同じものを2個製作", "接着剤塗布 ｺﾞﾏ粒:各1" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り取付け出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "ﾋﾟﾝｾｯﾄ保護ﾒｶﾞﾈ", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2.5㎜", "ToolOther": "95cN･m", "WorkName": "ﾘﾆｱｽｹｰﾙﾍｯﾄﾞ組立①", "WorkItems": [ "3. S/Nを梱包袋に記入し､完成品を収納する", "1. BRACKET へLINEAR-SCALE (S/N ********-01)及びLINEAR-SCALE (S/N $$$$$$$$-01)をBOLT WASHER で取付ける", "2. BRACKET へLINEAR-SCALE (S/N ********-02)及びLINEAR-SCALE (S/N $$$$$$$$-02)をBOLT WASHER で取付ける", "3. S/Nを梱包袋に記入し､完成品を収納する", "1. BRACKET へLINEAR-SCALE (S/N ********-01)及びLINEAR-SCALE (S/N $$$$$$$$-01)をBOLT WASHER で取付ける", "2. BRACKET へLINEAR-SCALE (S/N ********-02)及びLINEAR-SCALE (S/N $$$$$$$$-02)をBOLT WASHER で取付ける" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 95cN･m", "締付ﾄﾙｸ 95cN･m", "締付ﾄﾙｸ 95cN･m", "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "狭い", "読み取り面", "狭い", "狭い", "狭い", "読み取り面", "狭い", "読み取り面", "狭い", "狭い", "狭い", "読み取り面" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "100cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ﾘﾆｱｽｹｰﾙﾍｯﾄﾞ組立②", "WorkItems": [ "1. へﾏｰｷﾝｸﾞする" ], "WorkPoints": [ "黄色ﾏｰｶｰ使用", "寸法の追い方詳細" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "100㎜", "********ｰ01", "********ｰ02", "$$$$$$$$ｰ01", "$$$$$$$$ｰ02", "100㎜", "100㎜", "100㎜", "ﾏｰｷﾝｸﾞ位置" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｶﾒﾗﾘﾝｸｹｰﾌﾞﾙ中継ﾕﾆｯﾄ組立", "WorkItems": [ "2. 1の完成品へBRACKET をBOLT WASHER NUT で取付ける", "3. 2の完成品に㉛を３本通す", "◆1. PLATE へBUSH を貼付ける" ], "WorkPoints": [ "BUSH を下図の様に変形する", "R部は入念に押し付け貼付ける事", "取付けは端面方向へ押し付ける事", "約半分通し､縛ら無い事" ], "Tolks": [ "締付ﾄﾙｸ 150cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "3ｺﾏ", "2ｺﾏ", "この作業では同じものを2個製作", "ｲﾝｼｭﾛｯｸ指示", "･ｹｰﾌﾞﾙ同士を固定", "･ﾀｲﾏｳﾝﾄに固定 又は板金に固定" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り取付け出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "ﾋﾟﾝｾｯﾄ保護ﾒｶﾞﾈ", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2.5㎜", "ToolOther": "150cN･m", "WorkName": "ｶﾒﾗﾘﾝｸｹｰﾌﾞﾙ中継ﾕﾆｯﾄ組立", "WorkItems": [ "2. 1の完成品へBRACKET をBOLT WASHER NUT で取付ける", "3. 2の完成品に㉛を３本通す" ], "WorkPoints": [ "取付けは端面方向へ押し付ける事", "約半分通し､縛ら無い事" ], "Tolks": [ "締付ﾄﾙｸ 150cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "◆作業者安全作業" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "150cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "LED照明制御ﾎﾞｰﾄﾞ組立", "WorkItems": [ "★2. Dip-SW8番をONにする", "★1. LED LIGHTING CONTROL BOARD orLED LIGHTING CONTROL BOARD へCABLE を接続する" ], "WorkPoints": [ "CN15､CN19に接続する", "仕様員数通り(標準ﾍｯﾄﾞｶﾒﾗ､文字認識ﾍｯﾄﾞｶﾒﾗ)に制作する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "仕様(標準ﾍｯﾄﾞｶﾒﾗ､文字認識ﾍｯﾄﾞｶﾒﾗ)を確認する事", "CN15", "Dip-SW 8", "CN19", "or" ] }
{ "QualityItem": "接続確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り接続出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "LED照明制御ﾎﾞｰﾄﾞ組立", "WorkItems": [ "★2. Dip-SW8番をONにする", "★1. LED LIGHTING CONTROL BOARD orLED LIGHTING CONTROL BOARD へCABLE を接続する" ], "WorkPoints": [ "CN15､CN19に接続する", "仕様員数通り(標準ﾍｯﾄﾞｶﾒﾗ､文字認識ﾍｯﾄﾞｶﾒﾗ)に制作する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "仕様(標準ﾍｯﾄﾞｶﾒﾗ､文字認識ﾍｯﾄﾞｶﾒﾗ)を確認する事", "CN15", "Dip-SW 8", "CN19", "or" ] }
{ "QualityItem": "設定確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り設定出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板・警告ﾗﾍﾞﾙ貼付(真空ﾎﾟﾝﾌﾟ部)", "WorkItems": [ "1. COVER へLABEL (OP;LABEL )を貼付ける" ], "WorkPoints": [ "LABEL はLCR CHECKER仕様のみ貼付" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "54mm", "120mm", "35mm" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板・警告ﾗﾍﾞﾙ貼付①", "WorkItems": [ "1. COVER へLABEL LABEL LABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "40mm", "3mm", "5mm", "5mm" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板・警告ﾗﾍﾞﾙ貼付②", "WorkItems": [ "1. COVER へLABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "17㎜", "5㎜" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板・警告ﾗﾍﾞﾙ貼付③", "WorkItems": [ "1. COVER へLABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "70㎜", "50㎜" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板・警告ﾗﾍﾞﾙ貼付④", "WorkItems": [ "1. COVER へLABEL LABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "16mm", "下面合わせ", "10mm", "2mm", "下面合わせ", "2mm" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板・警告ﾗﾍﾞﾙ貼付⑤", "WorkItems": [ "1. COVER へLABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "17㎜", "5㎜" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品準備(本体部)", "WorkItems": [ "1. 次工程に払い出す" ], "WorkPoints": [ "員数を確認する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り払い出しされている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品準備(X軸部)①", "WorkItems": [ "1. 次工程に払い出す" ], "WorkPoints": [ "員数を確認する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り払い出しされている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品準備(X軸部)②", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り払い出しされている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品準備(標準ﾍｯﾄﾞｶﾒﾗ)", "WorkItems": [ "1. 次工程に払い出す" ], "WorkPoints": [ "員数を確認する事", "仕様を確認する事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り払い出しされている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品準備(文字認識対応ﾍｯﾄﾞｶﾒﾗ)", "WorkItems": [ "1. 次工程に払い出す" ], "WorkPoints": [ "員数を確認する事", "仕様を確認する事", "高さｾﾝｻ仕様がある場合はCLIP BOLT 払出不要" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り払い出しされている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品準備(ﾘｱ側供給部仕様別対応)", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示通り払い出しされている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板貼付け①", "WorkItems": [ "2. LABEL を貼付ける", "1. 貼付け面を清掃する" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "後 面" ] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "", "ToolOther": "", "WorkName": "銘板貼付け②", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "600㎜", "ToolOther": "", "WorkName": "銘板貼付け③", "WorkItems": [ "1. 貼付け面を清掃する", "2. LABEL ･LABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "前 面" ] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "300㎜", "ToolOther": "", "WorkName": "銘板貼付け④", "WorkItems": [ "1. 貼付け面を清掃する", "2. LABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "1000㎜", "ToolOther": "", "WorkName": "銘板貼付け⑤", "WorkItems": [ "1. 貼付け面を清掃する", "2. LABEL を貼付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±1㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "銘板貼付け⑥", "WorkItems": [ "1. PLATE にLABEL を貼付ける", "1. PLATE にLABEL を貼付ける" ], "WorkPoints": [ "貼付け面を清掃する", "貼付け面を清掃する" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "寸法の位置に貼付けている事", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "150cN･m", "WorkName": "ｽﾄｯﾊﾟｰ組立", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "150cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "300㎜", "ToolOther": "", "WorkName": "ｽﾄｯﾊﾟｰ接触位置脱脂作業(ｼﾝｸﾞﾙ2st)", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "200cN･m", "WorkName": "第1実装ｽﾄｯﾊﾟｰ取付", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "200cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "200cN･m", "WorkName": "第2実装ｽﾄｯﾊﾟｰ取付", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "200cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "300㎜", "ToolOther": "", "WorkName": "ｽﾄｯﾊﾟｰ接触位置脱脂作業(ﾃﾞｭｱﾙ4st)", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "200cN･m", "WorkName": "ｽﾄｯﾊﾟｰ取付", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "200cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "前面ｶﾊﾞｰ組立30連/60連", "WorkItems": [ "1. COVER にLABEL を貼付ける" ], "WorkPoints": [ "気泡無い事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "129㎜", "10㎜" ] }
{ "QualityItem": "貼付確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "寸法の位置に貼付けている事指示寸法±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "194cN･m", "WorkName": "ｶﾞｲﾄﾞ組立30連/60連(後側&左側)1", "WorkItems": [ "1. BRACKET にGUIDE をSPACER BOLT WASHER WASHER で取付ける" ], "WorkPoints": [ "平行に取付の事" ], "Tolks": [ "締付ﾄﾙｸ 194cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "194cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "194cN･m", "WorkName": "ｶﾞｲﾄﾞ組立30連/60連(後側&左側)2", "WorkItems": [], "WorkPoints": [ "面位置に取付の事", "平行に取付の事" ], "Tolks": [ "締付ﾄﾙｸ 194cN･m", "締付ﾄﾙｸ 194cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "32㎜" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "各194cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ｶﾞｲﾄﾞ組立30連/60連(後側&左側)2", "WorkItems": [], "WorkPoints": [ "面位置に取付の事", "平行に取付の事" ], "Tolks": [ "締付ﾄﾙｸ 194cN･m", "締付ﾄﾙｸ 194cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "32㎜" ] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法32.0㎜±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ｽﾙｰ部品30連/60連(後側&左側)", "WorkItems": [ "1. H1工程へ払い出す" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "部品準備", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "指示した部品を払い出す事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ﾓｰﾀ組立", "WorkItems": [ "2. MOTOR へCOUPLING PULLEY をBOLT で取付ける", "■1. 型式確認､ｼﾘｱﾙ№記入" ], "WorkPoints": [ "両側のｽﾘｯﾄを均等に締結する事", "COUPLING とPULLEY のｽﾘｯﾄを合わせる事" ], "Tolks": [ "締付ﾄﾙｸ 6.0N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "1.8mm", "ﾓｰﾀとﾌﾟｰﾘの隙間;1.8mm", "検査表MOTOR :ﾓｰﾀの型式確認とｼﾘｱﾙNo.記入", "隙間無い事", "ﾃｰﾊﾟ面", "ﾃｰﾊﾟ面", "WETE-G002-C33" ] }
{ "QualityItem": "型式確認･製造番号記録", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "型式･検査書確認､及びｼﾘｱﾙNo.転記", "Method": "目視", "RecordMethod": "WETE-G002-C33", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾚﾝﾁ", "Size": "4㎜", "ToolOther": "6.0N･m", "WorkName": "ﾓｰﾀ組立", "WorkItems": [ "2. MOTOR へCOUPLING PULLEY をBOLT で取付ける", "■1. 型式確認､ｼﾘｱﾙ№記入" ], "WorkPoints": [ "両側のｽﾘｯﾄを均等に締結する事", "COUPLING とPULLEY のｽﾘｯﾄを合わせる事" ], "Tolks": [ "締付ﾄﾙｸ 6.0N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "1.8mm", "ﾓｰﾀとﾌﾟｰﾘの隙間;1.8mm", "検査表MOTOR :ﾓｰﾀの型式確認とｼﾘｱﾙNo.記入", "隙間無い事", "ﾃｰﾊﾟ面", "ﾃｰﾊﾟ面", "■安全作業" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "6.0N･m±10%", "Method": "ﾄﾙｸﾚﾝﾁ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾌﾞﾛｯｸｹﾞｰｼﾞ", "Size": "1.8㎜", "ToolOther": "", "WorkName": "ﾓｰﾀ組立", "WorkItems": [ "2. MOTOR へCOUPLING PULLEY をBOLT で取付ける", "■1. 型式確認､ｼﾘｱﾙ№記入" ], "WorkPoints": [ "両側のｽﾘｯﾄを均等に締結する事", "COUPLING とPULLEY のｽﾘｯﾄを合わせる事" ], "Tolks": [ "締付ﾄﾙｸ 6.0N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "1.8mm", "ﾓｰﾀとﾌﾟｰﾘの隙間;1.8mm", "検査表MOTOR :ﾓｰﾀの型式確認とｼﾘｱﾙNo.記入", "隙間無い事", "ﾃｰﾊﾟ面", "ﾃｰﾊﾟ面", "■安全作業" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "1回/3年", "ToolRecord": "校正成績書", "StdVal": "1.8㎜を挟み取付ける事", "Method": "ﾌﾞﾛｯｸｹﾞｰｼﾞ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾚﾝﾁ", "Size": "6㎜", "ToolOther": "20.5N･m", "WorkName": "ﾍﾞﾙﾄﾃﾝｼｮﾝ組立", "WorkItems": [ "1. BLOCK へSPACER BEARING (ORBEARING )をBOLT で取付ける" ], "WorkPoints": [ "BLOCK をﾊﾞｲｽで固定し締結する" ], "Tolks": [ "締付ﾄﾙｸ 20.5N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "幅が狭い", "OR", "OR" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "20.5N･m±10%", "Method": "ﾄﾙｸﾚﾝﾁ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2.5㎜", "ToolOther": "40cN･m", "WorkName": "TL軸ｾﾝｻｰ組立", "WorkItems": [ "1. PLATE へSENSOR をBOLT WASHER WASHER で取付ける" ], "WorkPoints": [ "SENSOR は上に押し付ける事" ], "Tolks": [ "締付ﾄﾙｸ 40cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "押し付け", "平行に取付ける事" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "40cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2.5㎜", "ToolOther": "150cN･m", "WorkName": "給油部組立①", "WorkItems": [ "1. BLOCK へSCREW を挿入する" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 150cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "各150cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "150cN･m", "WorkName": "給油部組立②", "WorkItems": [ "1. へJOINT を挿入する" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 150cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "150cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "194cN･m", "WorkName": "給油部組立②", "WorkItems": [ "2. 1の完成品へBRACKET をBOLT WASHER で取付ける" ], "WorkPoints": [ "BRACKET は上に押し付ける事" ], "Tolks": [ "締付ﾄﾙｸ 194cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "押し付け" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "194cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "前面ﾌﾟﾚｰﾄ組立", "WorkItems": [], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "割り方向", "割り方向", "出代:5mm±0.5㎜", "押し付け/丸穴ｾﾝﾀｰ" ] }
{ "QualityItem": "出代確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "出代:5.0㎜±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2.5㎜", "ToolOther": "95cN･m", "WorkName": "前面ﾌﾟﾚｰﾄ組立", "WorkItems": [], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "割り方向", "割り方向", "出代:5mm±0.5㎜", "押し付け/丸穴ｾﾝﾀｰ" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "95cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾚｲﾌｨｰﾀﾞ吸着部LMｶﾞｲﾄﾞ平行だしｼﾞｸﾞ", "Size": "", "ToolOther": "FM-5063", "WorkName": "前面ﾌﾟﾚｰﾄ組立", "WorkItems": [ "2. 1の完成品へDOG DOG をBOLT WASHER で取付ける", "1. PLATE へSPRING-PIN を圧入する" ], "WorkPoints": [ "挿入面に注意" ], "Tolks": [ "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "割り方向", "割り方向", "出代:5mm±0.5㎜", "押し付け", "押し付け/丸穴ｾﾝﾀｰ", "押し付け/丸穴ｾﾝﾀｰ" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "FM-5063", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り取付け出来ている事", "Method": "てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾌﾞﾛｯｸｹﾞｰｼﾞ", "Size": "10.5㎜", "ToolOther": "", "WorkName": "前面ﾌﾟﾚｰﾄ組立", "WorkItems": [], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 95cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "割り方向", "割り方向", "出代:5mm±0.5㎜", "押し付け/丸穴ｾﾝﾀｰ" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "1回/3年", "ToolRecord": "校正成績書", "StdVal": "指示通り取付け出来ている事", "Method": "ﾌﾞﾛｯｸｹﾞｰｼﾞ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ﾎﾞｰﾙﾈｼﾞ組立①", "WorkItems": [], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法:±1㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "ﾎﾞｰﾙﾈｼﾞ組立①", "WorkItems": [ "1. TUBE を指定長さにｶｯﾄする", "2. JOINT へTUBE を挿入する", "3. BALL-SCREW へ2の完成品を取付ける" ], "WorkPoints": [ "型式確認､ｼﾘｱﾙNo.記録", "2の完成品は上に向けて取付ける事", "125mm" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "検査表JOINT :ﾎﾞｰﾙｽｸﾘｭｰの型式確認とｼﾘｱﾙNo.記録", "WETE-G002-C33" ] }
{ "QualityItem": "型式確認･製造番号記録", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "型式･検査書確認､及びｼﾘｱﾙNo.転記", "Method": "目視", "RecordMethod": "WETE-G002-C33", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "2.5㎜", "ToolOther": "110cN･m", "WorkName": "ﾎﾞｰﾙﾈｼﾞ組立②", "WorkItems": [ "1. BLOCK へCLIP をBOLT で取付ける" ], "WorkPoints": [ "CLIP は図の方向に向けて取付ける事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "110cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "150cN･m", "WorkName": "上部ﾌﾞﾛｯｸ組立", "WorkItems": [ "1. BLOCK へSPACER STOPPER をBOLT で取付ける" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 150cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "座ｸﾞﾘ側に挿入する事" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "150cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "下部ﾌﾞﾛｯｸ組立①", "WorkItems": [ "2. 1の完成品をBLOCK へ挿入しPLATE をBOLT WASHER で仮取付けする", "◆1. BEARING へ㉖を塗布する" ], "WorkPoints": [ "BEARING のﾏｰｸ面側から塗布する事", "ﾏｰｸ", "SD-A052134-020にて本締め", "ﾏｰｸ面を合わせる事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ｸﾞﾘｰｽ塗布:空間容積の30%~40%", "ﾏｰｸ面を合わせる", "検査表BEARING :ｱﾝｷﾞｭﾗﾍﾞｱﾘﾝｸﾞの組込" ] }
{ "QualityItem": "塗布量", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "空間容積の30%~40%", "Method": "目視", "RecordMethod": "-", "Other": "ｸﾞﾘｰｽLCG100", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "-", "Size": "", "ToolOther": "", "WorkName": "下部ﾌﾞﾛｯｸ組立①", "WorkItems": [ "2. 1の完成品をBLOCK へ挿入しPLATE をBOLT WASHER で仮取付けする", "◆1. BEARING へ㉖を塗布する" ], "WorkPoints": [ "BEARING のﾏｰｸ面側から塗布する事", "ﾏｰｸ", "SD-A052134-020にて本締め", "ﾏｰｸ面を合わせる事" ], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "ｸﾞﾘｰｽ塗布:空間容積の30%~40%", "ﾏｰｸ面を合わせる", "検査表BEARING :ｱﾝｷﾞｭﾗﾍﾞｱﾘﾝｸﾞの組込", "WETE-G002-C33" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "-", "ToolCycle": "-", "ToolRecord": "-", "StdVal": "ﾏｰｸ面を合わせる事", "Method": "目視", "RecordMethod": "WETE-G002-C33", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "Size": "3㎜", "ToolOther": "150cN･m", "WorkName": "下部ﾌﾞﾛｯｸ組立②", "WorkItems": [ "1. へSPACER STOPPER WASHER SPACER をBOLT で取付ける" ], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 150cN･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "150cN･m±10%", "Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸｽﾊﾟﾅ", "Size": "7㎜", "ToolOther": "3.2N･m", "WorkName": "下部ﾌﾞﾛｯｸ組立③", "WorkItems": [], "WorkPoints": [], "Tolks": [ "締付ﾄﾙｸ 3.2N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "8mm" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "3.2N･m±10%", "Method": "ﾄﾙｸｽﾊﾟﾅ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "下部ﾌﾞﾛｯｸ組立③", "WorkItems": [ "1. SPACER へSCREW を挿入する", "2. へ1の完成品とCABLE-SUPPORT を取付ける" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [] }
{ "QualityItem": "寸法確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法:±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｽｹｰﾙ", "Size": "150㎜", "ToolOther": "", "WorkName": "ﾌﾚｰﾑ組立", "WorkItems": [ "1. FRAME へPIN PIN PIN を圧入する" ], "WorkPoints": [], "Tolks": [], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "出代:5mm±0.5mm", "出代:6mm±0.5mm", "出代:4mm±0.5mm" ] }
{ "QualityItem": "出代確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示寸法:各±0.5㎜", "Method": "ｽｹｰﾙ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾘﾌﾄ組立ｼﾞｸﾞ", "Size": "", "ToolOther": "FM-4835", "WorkName": "ﾒｲﾝﾌﾚｰﾑ組立①", "WorkItems": [ "1. FRAME をBOLT BOLT で取付ける" ], "WorkPoints": [ "ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事", "図の順番に締結する事" ], "Tolks": [ "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m", "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "検査表 :ﾌﾚｰﾑ組立", "締結FRAME ", "締結 ", "締結 ", "締結 ", "隙間無い事" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "FM-4835", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り作業出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾚﾝﾁ", "Size": "6㎜", "ToolOther": "20.5N･m", "WorkName": "ﾒｲﾝﾌﾚｰﾑ組立①", "WorkItems": [ "1. FRAME をBOLT BOLT で取付ける" ], "WorkPoints": [ "ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事", "図の順番に締結する事" ], "Tolks": [ "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m", "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "検査表 :ﾌﾚｰﾑ組立", "締結FRAME ", "締結 ", "締結 ", "締結 ", "隙間無い事" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "各20.5N･m±10%", "Method": "ﾄﾙｸﾚﾝﾁ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾄﾙｸﾚﾝﾁ", "Size": "5㎜", "ToolOther": "9.8N･m", "WorkName": "ﾒｲﾝﾌﾚｰﾑ組立①", "WorkItems": [ "1. FRAME をBOLT BOLT で取付ける" ], "WorkPoints": [ "ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事", "図の順番に締結する事" ], "Tolks": [ "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m", "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "検査表 :ﾌﾚｰﾑ組立", "締結FRAME ", "締結 ", "締結 ", "締結 ", "隙間無い事" ] }
{ "QualityItem": "締付ﾄﾙｸ", "ToolManageNo": "-", "ToolCycle": "日常点検(1回/日)", "ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳", "StdVal": "各9.8N･m±10%", "Method": "ﾄﾙｸﾚﾝﾁ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ", "Size": "0.15㎜", "ToolOther": "", "WorkName": "ﾒｲﾝﾌﾚｰﾑ組立①", "WorkItems": [ "1. FRAME をBOLT BOLT で取付ける" ], "WorkPoints": [ "ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事", "図の順番に締結する事" ], "Tolks": [ "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m", "締付ﾄﾙｸ 9.8N･m", "締付ﾄﾙｸ 20.5N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "検査表 :ﾌﾚｰﾑ組立", "締結FRAME ", "締結 ", "締結 ", "締結 ", "隙間無い事" ] }
{ "QualityItem": "隙間確認", "ToolManageNo": "-", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "0.15㎜ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事", "Method": "ｼｯｸﾈｽｹﾞｰｼﾞ", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null
{ "ToolName": "ﾘﾌﾄ組立ｼﾞｸﾞ", "Size": "", "ToolOther": "FM-4835", "WorkName": "ﾒｲﾝﾌﾚｰﾑ組立②", "WorkItems": [ "1. LINEAR-WAY の防錆油を拭き取る", "2. へ1の完成品をBOLT で取付ける" ], "WorkPoints": [ "型式確認､ｼﾘｱﾙNo.記録" ], "Tolks": [ "締付ﾄﾙｸ 3.2N･m" ], "InspectionNo": "", "InspectionItems": [], "WorkTypes": [], "Words": [ "検査表LINEAR-WAY :LMｶﾞｲﾄﾞの型式確認とｼﾘｱﾙNo.記録", "検査表LINEAR-WAY :ﾘﾌﾄ軸LMｶﾞｲﾄﾞ基準側取付け" ] }
{ "QualityItem": "取付確認", "ToolManageNo": "FM-4835", "ToolCycle": "校正対象外", "ToolRecord": "-", "StdVal": "指示通り作業出来ている事", "Method": "目視", "RecordMethod": "-", "Other": "-", "ProcessNames": [] }
information_extraction
0
null