input stringclasses 1
value | instruction stringlengths 223 3.4k | output stringlengths 206 380 | category stringclasses 1
value | index stringclasses 1
value | fileName null |
|---|---|---|---|---|---|
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "支給品",
"WorkItems": [
"2. 本体部ﾄﾞｯｷﾝｸﾞ工程へ支給する",
"1. BOX のｼｰﾙを剥がす"
],
"WorkPoints": [
"全体に傷や割れが無いか確認する(2個)"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Word... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "600㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑ組立横",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT NUT CABLE-SUPPORT を取付",
"2. 1.完成品にBRACKET をBOLT ･WASHER で取付"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "600㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑ組立縦",
"WorkItems": [
"1. FRAME にSUPPORT NUT を取付",
"2. 1.完成品にBRACKET をBOLT WASHER で取付"
],
"WorkPoints": [
"上面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words":... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "600㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑ組立",
"WorkItems": [
"1. ①に②をBOLT WASHER で取付",
"2. ㉘にBOLT WASHER (各8個)を入れマスキングテープで止め同梱"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"この作業... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "HEPA組立①",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"2. BLOWER の取付ﾌﾞﾗｹｯﾄを1.完成品と交換し取り外したﾎﾞﾙﾄとWASHER で固定",
"1.完成品",
"4ヶ所",
"交換したﾌﾞﾗ... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "HEPA組立②",
"WorkItems": [
"2. BOLT ・WASHER ・WASHER を㉖に入れマスキングテープで止め同梱",
"1. ①にGASKET ･GASKET ･GASKET を取付"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑ上面ｶﾊﾞｰ準備①",
"WorkItems": [
"1. GROMMET に切り込みを入れる",
"2. COVER に1.完成品･GROMMET を取付"
],
"WorkPoints": [
"切り込み"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"1... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑ上面ｶﾊﾞｰ準備②",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"1. COVER にGROMMET を取付"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "共通ﾌﾚｰﾑｷｯﾄUPPER1組立",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N007:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "共通ﾌﾚｰﾑｷｯﾄUPPER1組立",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N007:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す"
... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立①",
"WorkItems": [
"2. 1.完成品にSUPPORT NUT NUT を取付け",
"1. FRAME にCAP を両端面に取付け"
],
"WorkPoints": [
"上面",
"右面",
"外面",
"左面",
"外面",
"内面",
"右面",
"外面",
"左面",
"上... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立②",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"左面",
"上面",
"外面",
"内面",
"外面",
"内面",
"下面",
"外面",
"左面",
"上面",
"下面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立③",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"左面",
"上面",
"外面",
"外面",
"①とBRACKET の端面を合わせる",
"内面",
"下面",
"外面",
"左面",
"上面"
],... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立④",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT CABLE-SUPPORT を取付け"
],
"WorkPoints": [
"左面",
"上面",
"外面",
"外面",
"下面",
"内面",
"内面",
"下面",
"外面",
"左面",
"上面",
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑤",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"左面",
"外面",
"外面",
"①とBRACKET の端面を合わせる",
"内面",
"下面",
"外面",
"左面",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑥",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"左面",
"外面",
"外面",
"下面",
"内面",
"内面",
"下面",
"外面",
"左面",
"上面",
"風船色ﾅｯﾄｻｲｽﾞ"
],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑦",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"左面",
"外面",
"外面",
"①とBRACKET の端面を合わせる",
"内面",
"下面",
"外面",
"左面",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑧",
"WorkItems": [
"1. FRAME にSUPPORT NUT を取付け"
],
"WorkPoints": [
"左面",
"上面",
"外面",
"内面",
"内面",
"下面",
"外面",
"左面",
"上面",
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑨",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"左面",
"外面",
"外面",
"①とBRACKET の端面を合わせる",
"内面",
"下面",
"外面",
"左面",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑩",
"WorkItems": [
"1. ①に②③④⑤をWASHER BOLT で取付"
],
"WorkPoints": [
"外面",
"①と②の端面を合わせる",
"全て内面側を㉗側にして合わせる",
"①と②③④⑤の端面を合わせる"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ正面側組立⑩",
"WorkItems": [
"1. ①に②③④⑤をWASHER BOLT で取付"
],
"WorkPoints": [
"外面",
"①と②の端面を合わせる",
"全て内面側を㉗側にして合わせる",
"①と②③④⑤の端面を合わせる"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"Inspect... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立①",
"WorkItems": [
"2. 1.完成品にSUPPORT NUT NUT を取付け",
"1. FRAME にCAP を両端面に取付け"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立②",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"右面",
"上面",
"外面",
"内面",
"外面",
"内面",
"下面",
"外面",
"右面",
"上面",
"下面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立③",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"右面",
"上面",
"外面",
"外面",
"内面",
"下面",
"外面",
"右面",
"上面",
"①とBRACKET の端面を合わせる"
],... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立④",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"右面",
"上面",
"外面",
"外面",
"下面",
"内面",
"内面",
"下面",
"外面",
"右面",
"上面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑤",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"右面",
"外面",
"外面",
"①とBRACKET の端面を合わせる",
"内面",
"下面",
"外面",
"右面",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑥",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"右面",
"外面",
"外面",
"下面",
"内面",
"下面",
"外面",
"右面",
"上面",
"上面",
"風船色ﾅｯﾄｻｲｽﾞ"
],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑦",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"右面",
"外面",
"外面",
"①とBRACKET の端面を合わせる",
"内面",
"下面",
"外面",
"右面",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑧",
"WorkItems": [
"1. FRAME にSUPPORT NUT を取付け"
],
"WorkPoints": [
"右面",
"上面",
"外面",
"内面",
"内面",
"下面",
"外面",
"右面",
"上面",
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑨",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"外面",
"外面",
"内面",
"下面",
"外面",
"右面",
"上面",
"①とBRACKET の端面を合わせる",
"右面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑩",
"WorkItems": [
"1. ①②③④⑤をWASHER BOLT で取付"
],
"WorkPoints": [
"外面",
"①と②の端面を合わせる",
"全て内面側を㉗側にして合わせる",
"①と②③④⑤の端面を合わせる"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo":... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ後面側組立⑩",
"WorkItems": [
"1. ①②③④⑤をWASHER BOLT で取付"
],
"WorkPoints": [
"外面",
"①と②の端面を合わせる",
"全て内面側を㉗側にして合わせる",
"①と②③④⑤の端面を合わせる"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"Inspecti... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立①",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"正面方向",
"右面",
"底面",
"左面",
"底面",
"内面",
"右面",
"底面",
"左面",
"正面方向",
"内面",
"正面方向"... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立②",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"①とBRACKET の端面を合わせる",
"左面",
"底面",
"内面",
"右面",
"底面",
"左面",
"正面方向",
"正面方向",
"正面方向"... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立③",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"正面方向",
"右面",
"底面",
"左面",
"底面",
"内面",
"右面",
"底面",
"左面",
"正面方向",
"内面",
"正面方向"... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立④",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"左側",
"後面",
"底面",
"正面",
"底面",
"内面",
"左側",
"左側",
"内面",
"正面",
"底面",
"後面",
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑤",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑥",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"左面",
"後面",
"底面",
"正面",
"底面",
"内面",
"左面",
"左面",
"内面",
"正面",
"底面",
"後面",
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑦",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"左面",
"底面",
"底面",
"左面",
"左面",
"内面",
"正面",
"底面",
"後面",
"①とBRACKET の端面を合わせる",
... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑧",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"左面",
"後面",
"底面",
"正面",
"底面",
"内面",
"左面",
"左面",
"内面",
"正面",
"底面",
"後面",
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑨",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑩",
"WorkItems": [
"1. ①②③④⑤WASHER を⑦BOLT で取付"
],
"WorkPoints": [
"底面",
"②と③の端面を合わせる",
"全て底面側を㉗定盤にて合わせる",
"②と⑤の端面を合わせる",
"正面側",
"ﾅｯﾄの配置注意"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ底面側組立⑩",
"WorkItems": [
"1. ①②③④⑤WASHER を⑦BOLT で取付"
],
"WorkPoints": [
"底面",
"②と③の端面を合わせる",
"全て底面側を㉗定盤にて合わせる",
"②と⑤の端面を合わせる",
"正面側",
"ﾅｯﾄの配置注意"
],
"Tolks": [
"締付ﾄﾙｸ ... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ上面側組立①",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"左面",
"上面",
"前面",
"上面",
"下面",
"後面",
"後面",
"下面",
"前面",
"左面",
"上面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ上面側組立②",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"左面",
"上面",
"①とBRACKET の端面を合わせる",
"上面",
"後面",
"下面",
"前面",
"左面",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ左面側組立①",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"後側",
"上面",
"左面",
"左面",
"下面",
"右面",
"右面",
"下面",
"左面",
"後側",
"上面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ左面側組立②",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"後側",
"左面",
"①とBRACKET の端面を合わせる",
"左面",
"右面",
"下面",
"左面",
"後側",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ左面側組立③",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"後側",
"上面",
"左面",
"左面",
"下面",
"右面",
"後側",
"右面",
"上面",
"左面",
"下面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ左面側組立④",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"後側",
"左面",
"①とBRACKET の端面を合わせる",
"左面",
"後側",
"右面",
"上面",
"左面",
"下面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ左面側組立⑤",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"後側",
"上面",
"左面",
"左面",
"下面",
"右面",
"右面",
"下面",
"左面",
"後側",
"上面",
"風船色ﾅｯﾄｻｲｽ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ左面側組立⑥",
"WorkItems": [
"1. ①にBRACKET をWASHER BOLT で取付"
],
"WorkPoints": [
"後側",
"左面",
"①とBRACKET の端面を合わせる",
"左面",
"右面",
"下面",
"左面",
"後側",
"上面"
],
"Tolks":... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立①",
"WorkItems": [
"1. ①と②をWASHER BOLT BOLT で取付"
],
"WorkPoints": [
"①の底面を下にして②を①の内面側に取付ける",
"拡大図",
"正面側",
"A矢視図"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"I... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立①",
"WorkItems": [
"1. ①と②をWASHER BOLT BOLT で取付"
],
"WorkPoints": [
"①の底面を下にして②を①の内面側に取付ける",
"拡大図",
"正面側",
"A矢視図"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": ""... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立②",
"WorkItems": [
"1. ①と②をWASHER BOLT BOLT で取付"
],
"WorkPoints": [
"後側",
"①の底面を下にして②を①の内面側に取付ける",
"正面側",
"拡大図",
"A矢視図"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo"... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立②",
"WorkItems": [
"1. ①と②をWASHER BOLT BOLT で取付"
],
"WorkPoints": [
"後側",
"①の底面を下にして②を①の内面側に取付ける",
"正面側",
"拡大図",
"A矢視図"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"Inspec... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立③",
"WorkItems": [
"1. ①に②③④をWASHER BOLT で取付"
],
"WorkPoints": [
"左面(内面からの図)",
"左面側に各材料の端面合わせ",
"正面側",
"後面側"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"Inspe... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立③",
"WorkItems": [
"1. ①に②③④をWASHER BOLT で取付"
],
"WorkPoints": [
"左面(内面からの図)",
"左面側に各材料の端面合わせ",
"正面側",
"後面側"
],
"Tolks": [
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立④",
"WorkItems": [
"1. ①に②をWASHER BOLT で取付",
"2. 1.完成品とWASHER SUPPORT NUT BOLT を後工程に払い出し"
],
"WorkPoints": [
"上面からの図",
"上面側に端面合わせ",
"左側",
"正面側",
"後側"
],
"Tolks": [
"締付... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "中間ｶﾊﾞｰﾌﾚｰﾑｷｯﾄ全体組立④",
"WorkItems": [
"1. ①に②をWASHER BOLT で取付",
"2. 1.完成品とWASHER SUPPORT NUT BOLT を後工程に払い出し"
],
"WorkPoints": [
"上面からの図",
"上面側に端面合わせ",
"左側",
"正面側",
"後側"
],
"Tolks": [
... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立①",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"中央ﾌﾚｰﾑ固定用の穴が扉下側になるよう組付け"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": ... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "300㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立②",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT ･CAP を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"ﾀｯﾌﾟ穴が扉左側になるよう組付け"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkType... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立③",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT を取付"
],
"WorkPoints": [
"ﾌﾗｯﾄ面",
"風船色ﾅｯﾄｻｲｽﾞ",
"中央ﾌﾚｰﾑ固定用の穴が扉下側になるよう組付け"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立④",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT を取付",
"2. 1.完成品にCAP を取付"
],
"WorkPoints": [
"ﾌﾗｯﾄ面",
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑤",
"WorkItems": [
"1. CLAMP を指定の長さにｶｯﾄ",
"2. 1.完成品･②･③･④･⑤･FRAME ･PANEL ･PANEL をBOLT で組付け"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑥",
"WorkItems": [
"1. ①にHINGE をSCREW で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"白ﾌﾟﾗｽﾁｯｸが下になる様に取付"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑦",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "WWYJ-5300-031",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"WWYJ-5300-031"
]
} | {
"QualityItem": "型式確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式が一致する事",
"Method": "目視",
"RecordMethod": "WWYJ-5300-031",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑦",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"WWYJ-5300-031"
]
} | {
"QualityItem": "製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "製造番号転記",
"Method": "目視",
"RecordMethod": "WWYJ-5300-031",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "ﾍｷｻﾛT20",
"ToolOther": "1.0N･m",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑦",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.0N･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑧",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"1. ①に②をBOLT WASHER で取付",
"この作業では同じものを2個製作",
"×2"... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑨",
"WorkItems": [
"1. ①にCATCH をBOLT で取付"
],
"WorkPoints": [
"取っ手取付用穴"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"この作業では同... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑩",
"WorkItems": [
"1. ①にBRACKET PLATE をBOLT WASHER BOLT で取付"
],
"WorkPoints": [
"ﾌﾚｰﾑ下面に直角平行に取付",
"取っ手取付用穴",
"ﾌﾚｰﾑに対して直角平行に取付"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-LEFT)組立⑪",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立①",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"中央ﾌﾚｰﾑ固定用の穴が扉下側になるよう組付け",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo": "",
"Inspe... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "300㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立②",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT ･CAP を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"ﾀｯﾌﾟ穴が扉左側になるよう組付け",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo": "",
"I... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立③",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT を取付"
],
"WorkPoints": [
"ﾌﾗｯﾄ面",
"風船色ﾅｯﾄｻｲｽﾞ",
"中央ﾌﾚｰﾑ固定用の穴が扉下側になるよう組付け",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo":... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立④",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT を取付",
"2. 1.完成品にCAP を取付"
],
"WorkPoints": [
"ﾌﾗｯﾄ面",
"風船色ﾅｯﾄｻｲｽﾞ",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo": "... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑤",
"WorkItems": [
"1. CLAMP を指定の長さにｶｯﾄ",
"1. 1.完成品･②･③･④･⑤･FRAME ･PANEL ･PANEL をBOLT で組付け"
],
"WorkPoints": [
"1.完成品の取付方向に注意",
"ｶｯﾄした両端を､更に図のようにｶｯﾄ",
"部拡大図"
],
"Tolks": [],
... | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑥",
"WorkItems": [
"1. ①にHINGE をSCREW で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"白ﾌﾟﾗｽﾁｯｸが下になる様に取付",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑦",
"WorkItems": [
"2. BRACKET にSWITCH をNUT-PLATE ･BOLT ･WASHER ･WASHER で取付",
"■1. SWITCH の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [
"締付ﾄﾙｸ 1.0N･m"
... | {
"QualityItem": "型式確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式が一致する事",
"Method": "目視",
"RecordMethod": "WWYJ-5300-034",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑦",
"WorkItems": [
"2. BRACKET にSWITCH をNUT-PLATE ･BOLT ･WASHER ･WASHER で取付",
"■1. SWITCH の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [
"締付ﾄﾙｸ 1.0N･m"
... | {
"QualityItem": "製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "製造番号転記",
"Method": "目視",
"RecordMethod": "WWYJ-5300-034",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "ﾍｷｻﾛT20",
"ToolOther": "1.0N･m",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑦",
"WorkItems": [
"2. BRACKET にSWITCH をNUT-PLATE ･BOLT ･WASHER ･WASHER で取付",
"■1. SWITCH の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": ... | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.0N･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑧",
"WorkItems": [
"1. ①に②をBOLT ･WASHER で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑨",
"WorkItems": [
"1. ①にCATCH をBOLT で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑩",
"WorkItems": [
"1. ①にBRACKET ･PLATE をBOLT ･WASHER ･BOLT で取付"
],
"WorkPoints": [
"ﾌﾚｰﾑ下面に直角平行に取付",
"取っ手取付用穴",
"ﾌﾚｰﾑに対して直角平行に取付",
"下記ｷｯﾄは､扉前右が共通の為､同様に作成の事"
],
"Tolks": [],
"Inspec... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉FRONT-RIGHT)組立⑪",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "架台上面中継JOINT取付",
"WorkItems": [
"1. 架台へ②~⑨をBOLT WASHER で取付ける"
],
"WorkPoints": [
"各a~iを下図に従い取付方向に注意し取付ける",
"前 面 側"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｲｵﾅｲｻﾞｰ・ｶﾊﾞｰﾛｯｸ用ﾊﾞﾙﾌﾞ組付け",
"WorkItems": [
"1. 本体に①②を付属のﾎﾞﾙﾄで取付"
],
"WorkPoints": [
"ｲｵﾅｲｻﾞｰやｶﾊﾞｰﾛｯｸの配管は上面穴より架台下へ通す事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "IC供給ｶﾊﾞｰﾛｯｸ用ﾊﾞﾙﾌﾞ組付け_IC供給有り",
"WorkItems": [
"1. 本体に①を付属のﾎﾞﾙﾄで取付"
],
"WorkPoints": [
"IC供給有りの場合実施する",
"ｼﾞｮｲﾝﾄにあるﾌﾟﾗｸﾞを取り外し接続します(廃棄)",
"ｲｵﾅｲｻﾞｰやｶﾊﾞｰﾛｯｸの配管は上面穴より架台下へ通す事"
],
"Tolks": [],
"InspectionNo": "",
"I... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ取付①(JOINT.ﾌｨﾙﾀｰ組付け)",
"WorkItems": [
"1. 本体に①②をBOLT WASHER (付属)のﾎﾞﾙﾄで取付",
"2. 本体に③をBOLT WASHER (付属)のﾎﾞﾙﾄで取付"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"W... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ取付②(正圧2ﾚｷﾞｭﾚｰﾀ組付け)",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"1. 本体に②をWASHER BOLT で取付",
"後側",
"2. 本体に③をBOLT WASHER で取付"
]... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ取付③(ｾﾝｻｰ組付け)",
"WorkItems": [
"1. 本体に②をBOLT WASHER で取付"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"後側"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ取付④(ｴｱｰｺｯｸ組付け)",
"WorkItems": [
"1. 本体①に②をBOLT WASHER で取付"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"後側"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ配管接続①",
"WorkItems": [
"1. ﾌｨﾙﾀｰ部配管接続",
"2. V01,V02配管接続"
],
"WorkPoints": [
"o12 ｵﾚﾝｼﾞ",
"o12 白",
"o12 白"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Word... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ配管接続②",
"WorkItems": [
"1. P01,P02配管接続",
"2. ｴｱｰｺｯｸ1配管接続"
],
"WorkPoints": [
"o12 黒",
"o12 黒",
"o12 黒",
"o12 黒"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ配管接続③",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"P03",
"接続",
"1. ｴｱｰｺｯｸ2配管接続",
"内側より",
"正圧2",
"接続",
"接続"... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ配管接続④",
"WorkItems": [
"1. ﾚｷﾞｭﾚｰﾀ配管接続"
],
"WorkPoints": [
"o12 白",
"o12 白"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側より",
"真空1",
"内側よ... | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ配管接続⑤",
"WorkItems": [
"1. 正圧ｾﾝｻｰ配管接続"
],
"WorkPoints": [
"o 6 黒",
"o 6 黒"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側より",
"内側より",
"接続"... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾒｲﾝﾊﾞﾙﾌﾞ配管接続⑥",
"WorkItems": [
"1. 負圧ｾﾝｻｰ配管接続"
],
"WorkPoints": [
"o 6 白",
"o 6 白"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側より",
"内側より",
"接続"... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "本体配管①(上流連結)",
"WorkItems": [
"1. 上流設備の配管を接続"
],
"WorkPoints": [
"配管は穴を通して表側に通す",
"ﾒｲﾝﾚｷﾞｭﾚﾀｰの裏を立ちあげる"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"E203",
... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "本体配管②(f部接続)",
"WorkItems": [
"1. f部の配管を接続"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"Pf1",
"Ef1",
"Vf1",
"Pf2",
"P203 φ10 黒",
... | {
"QualityItem": "配管接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.