input stringclasses 1 value | instruction stringlengths 228 3.39k | output stringlengths 287 3.32k | category stringclasses 1 value | index stringclasses 1 value | fileName null |
|---|---|---|---|---|---|
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "CPU-BOX前段取り",
"Words": [
"BFG",
"UNI01*-BKT",
"番号を記入",
"①と⑥の下面を合わせる"
],
"WorkItems": [
"■1. ①の製造番号を検査表に記入する",
"2. ①にBRACKET をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionItems": [
"検査表①:6.その他(1)型式･検査書ﾁｪｯｸ-1"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "4㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"Other": "3.2N･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "CPU-BOX前段取り",
"QualityItem": "製造番号記録",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "製造番号転記",
"Method": "目視",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "CPU-BOX前段取り",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "CN中継基板(搬送)前段取り",
"Words": [
"CNB5",
"K323",
"K324",
"ｼﾝｸﾞﾙｺﾝﾍﾞﾔｰ仕様",
"K323",
"K324",
"ﾃﾞｭｱﾙｺﾝﾍﾞﾔｰ仕様",
"製造番号",
"型式"
],
"WorkItems": [
"■1. PCB-COM の型式を確認し､製造番号を記入する",
"3. 基板をｴｱｰﾏｯﾄで梱包し､K323及びK324を表記する",
"2. ｺﾝﾍﾞﾔｰ仕様を確認し､ﾃﾞｭｱﾙｺﾝﾍﾞﾔｰ仕様のみK323へCABLE をCNB5へ接続する"
],
"WorkPoints": [
"【ﾃﾞｭｱﾙｺﾝﾍﾞﾔｰ仕様】K323⇒CABLE ｼｮｰﾄｺﾈｸﾀあり:1枚/K324⇒CABLE ｼｮｰﾄｺﾈｸﾀなし:1枚【ｼﾝｸﾞﾙｺﾝﾍﾞﾔｰ仕様】K323､K324⇒CABLE ｼｮｰﾄｺﾈｸﾀなし:2枚"
],
"Tolks": [],
"InspectionItems": [
"検査表①:3.基板関係(1)型式･検査書ﾁｪｯｸ-3､4"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業"
],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "CN中継基板(搬送)前段取り",
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式確認､製造番号転記",
"Method": "目視",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "CN中継基板(I/O)前段取り",
"Words": [
"型式",
"製造番号"
],
"WorkItems": [
"■1. PCB-COM の型式を確認し､製造番号を記入する",
"2. 基板をｴｱｰﾏｯﾄで梱包し､K321及びK322を表記する"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [
"検査表①:3.基板関係(1)型式･検査書ﾁｪｯｸ-1､2"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "CN中継基板(I/O)前段取り",
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式確認､製造番号転記",
"Method": "目視",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "FAN前段取り",
"Words": [
"型式",
"製造番号",
"型式",
"製造番号",
"G111R",
"G112R",
"ﾀｸﾞの端面と保護ﾁｭｰﾌﾞの\u000b端面を合わせて固定"
],
"WorkItems": [
"■1. FAN FAN の型式を確認し､製造番号を記入する",
"2. FAN FAN へ③④を取付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [
"検査表①:6.その他(1)型式･検査書ﾁｪｯｸ-3､4"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "FAN前段取り",
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式確認､製造番号転記",
"Method": "目視",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "FAN組立(架台下用)",
"Words": [],
"WorkItems": [
"1. ①へFAN-GUARD をBOLT WASHER WASHER NUT で取付ける"
],
"WorkPoints": [
"FAN-GUARD の取付け方向に注意"
],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"Other": "3.2N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "FAN組立(架台下用)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "FAN組立(真空ﾎﾟﾝﾌﾟ冷却用)",
"Words": [
"配線取出口",
"矢視",
"矢視図",
"AIR FLOW",
"AIR FLOW",
"表裏注意",
"･文字面\u000b(SANYO)\u000b･矢印\u000b(上下)",
"配線取出口"
],
"WorkItems": [
"1. ①へFAN-GUARD をBOLT WASHER WASHER WASHER NUT で取付ける",
"2. 1の完成品へBRACKET FAN-FILTER をBOLT WASHER WASHER NUT WASHER で取付ける"
],
"WorkPoints": [
"配線が出ている面にFAN-GUARD を取付ける事"
],
"Tolks": [
"締付ﾄﾙｸ 78cN･m",
"締付ﾄﾙｸ 78cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"Other": "78cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28",
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "FAN組立(真空ﾎﾟﾝﾌﾟ冷却用)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "78cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "真空ﾎﾟﾝﾌﾟ前段取り",
"Words": [
"型式",
"製造番号",
"30㎜"
],
"WorkItems": [
"■1. PUMP の型式をﾁｪｯｸし､製造番号を検査表に記入する",
"2. PUMP に⑥を取付ける"
],
"WorkPoints": [
"外箱に検査表有り"
],
"Tolks": [],
"InspectionItems": [
"検査表①:6.その他(1)型式･検査書ﾁｪｯｸ-5"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "真空ﾎﾟﾝﾌﾟ前段取り",
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式確認､製造番号転記",
"Method": "目視",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "真空ﾎﾟﾝﾌﾟ前段取り",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "真空ﾌｨﾙﾀｰ組立①",
"Words": [
"28~29㎜※緩める方向に調整禁止",
"取付け方向に注意!",
"ｴｱｰ流れ方向"
],
"WorkItems": [
"1. NIPPLE へ㉖を巻く",
"2. ②へ1の完成品を取付ける"
],
"WorkPoints": [
"ｼｰﾙﾃｰﾌﾟを2回転半巻く",
"巻き付け方向注意"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｼｰﾙﾃｰﾌﾟ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾓﾝｷｰﾚﾝﾁ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26",
"使用治工具No.27,28,29"
]
} | [
{
"WorkName": "真空ﾌｨﾙﾀｰ組立①",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "真空ﾌｨﾙﾀｰ組立②",
"Words": [
"4.5~5.5㎜※緩める方向に調整禁止",
"22~23㎜※緩める方向に調整禁止"
],
"WorkItems": [
"1. ①へJOINT JOINT を取付ける",
"2. 1の完成品へJOINT JOINT を取付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾓﾝｷｰﾚﾝﾁ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽﾊﾟﾅ",
"Size": "22㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28,29,30"
]
} | [
{
"WorkName": "真空ﾌｨﾙﾀｰ組立②",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "真空ﾌｨﾙﾀｰ組立③",
"Words": [
"54mm",
"128mm"
],
"WorkItems": [
"1. COVER へLABEL を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "真空ﾌｨﾙﾀｰ組立③",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "真空ﾌｨﾙﾀｰ組立④",
"Words": [
"付属ﾅｯﾄ"
],
"WorkItems": [
"1. ①へPLATE を取付ける",
"2. ③へ1の完成品をBOLT WASHER で取付ける",
"3. TUBE を指定の長さに切断､番号を記入し､2の完成品へ接続する"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(白) ⇒ 青ﾏｯｷｰ使用"
],
"Tolks": [
"締付ﾄﾙｸ 15.0N･m",
"締付ﾄﾙｸ 194cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "22㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "24㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "24㎜",
"Other": "15.0N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"Other": "194cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ｽｹｰﾙ",
"Size": "600㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.32",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28",
"使用治工具No.29,30",
"使用治工具No.31,32"
]
} | [
{
"WorkName": "真空ﾌｨﾙﾀｰ組立④",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "15.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "真空ﾌｨﾙﾀｰ組立④",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "194cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "真空ﾌｨﾙﾀｰ組立④",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｹﾞｰｼﾞ組立①",
"Words": [
"①清掃ﾌﾞﾛｰ圧設定値:0.13~0.14MPa",
"②台車ｴｱ圧 設定値:0.4MPa"
],
"WorkItems": [
"1. GAUGE GAUGE の小ねじを外し､ｶﾊﾞｰﾘﾝｸﾞ及びｶﾊﾞｰを取り外す",
"2. GAUGE GAUGE のﾘﾐｯﾄｲﾝｼﾞｹｰﾀ(緑)を設定する",
"3. 2の完成品へｶﾊﾞｰを取付け､ｶﾊﾞｰﾘﾝｸﾞを付属の小ねじで固定する"
],
"WorkPoints": [
"ｹﾞｰｼﾞの設定目盛りの外側に調整",
"指針折り曲げ､目盛版に傷を付けないよう注意する事",
"上部凹みとｶﾊﾞｰ合わせﾏｰｸが合った事を確認する事"
],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "+ﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "精密ﾄﾞﾗｲﾊﾞｰ",
"Size": "-",
"Other": "ﾏｲﾅｽ"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26",
"使用治工具No.27",
"使用治工具No.26,28"
]
} | [
{
"WorkName": "ｹﾞｰｼﾞ組立①",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｹﾞｰｼﾞ組立②",
"Words": [],
"WorkItems": [
"1. ①②GAUGE へ㉖を巻く",
"2. 1の完成品へJOINT を取付ける"
],
"WorkPoints": [
"ｼｰﾙﾃｰﾌﾟを2周半巻く",
"巻き付け方向注意"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｼｰﾙﾃｰﾌﾟ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "12㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽﾊﾟﾅ",
"Size": "14㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26",
"使用治工具No.27,28,29"
]
} | [
{
"WorkName": "ｹﾞｰｼﾞ組立②",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "圧力ｾﾝｻ組立",
"Words": [
"付属品(黒枠)※ﾓﾆﾀｰ面から挿入",
"③型式:DP-002Z",
"①型式:DP-001Z"
],
"WorkItems": [
"1. SENSOR へJOINT をSENSOR へJOINT を取付ける",
"2. 1の完成品へSENSOR SENSOR の付属品(黒枠)を取付ける"
],
"WorkPoints": [
"割れに注意してﾂﾒ4箇所挿入"
],
"Tolks": [
"締付ﾄﾙｸ 90cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "90cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "圧力ｾﾝｻ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "90cN･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｹﾞｰｼﾞ取付",
"Words": [
"負圧ｹﾞｰｼﾞ 範囲:-100~0KPa",
"正圧ｹﾞｰｼﾞ 範囲:0~0.2MPa",
"正圧ｹﾞｰｼﾞ 範囲:0~1MPa"
],
"WorkItems": [
"1. BRACKET へ②⇒④⇒③の順に取付ける"
],
"WorkPoints": [
"BRACKET の凹部(位置決め)と②③④の凸部を合わせる事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｹﾞｰｼﾞ取付ｼﾞｸﾞ",
"Size": "-",
"Other": "FM-2879"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "ｹﾞｰｼﾞ取付",
"QualityItem": "取付確認",
"ToolManageNo": "FM-2879",
"ToolName": "ｹﾞｰｼﾞ取付ｼﾞｸﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "圧力ｾﾝｻ取付",
"Words": [
"付属品(白枠)",
"型式:DP-001Z",
"型式:DP-002Z",
"OK",
"NG:挿入不完全",
"型式:DP-002Z"
],
"WorkItems": [
"2. TUBE を指定の長さに切断､番号を記入し､1の完成品へ接続する",
"1. ①へ②③を②③の付属品(白枠)で取付ける"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "圧力ｾﾝｻ取付",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｹﾞｰｼﾞﾕﾆｯﾄﾌﾞﾗｹｯﾄ組立",
"Words": [
"5mm",
"端面合わせ"
],
"WorkItems": [
"1. ①へBRACKET をNUT BOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 194cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"Other": "194cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "ｹﾞｰｼﾞﾕﾆｯﾄﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "194cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ｹﾞｰｼﾞﾕﾆｯﾄﾌﾞﾗｹｯﾄ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立①",
"Words": [],
"WorkItems": [
"1. BRACKET にREGULATOR REGULATOR を取付ける"
],
"WorkPoints": [
"BRACKET の凹部(位置決め)とREGULATOR REGULATOR の凸部を合わせる事"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚｷﾞｭﾚｰﾀAR20締付治具",
"Size": "-",
"Other": "FM-2217"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"Other": "3.6N･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立①",
"QualityItem": "取付確認",
"ToolManageNo": "FM-2217",
"ToolName": "ﾚｷﾞｭﾚｰﾀAR20締付治具",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立①",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.6N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立②",
"Words": [
"付属ﾜｯｼｬｰ※ｴｯｼﾞ下向き",
"付属ﾅｯﾄ",
"33㎜",
"付属ﾅｯﾄ",
"A矢視図",
"A矢視",
"平行に取付け"
],
"WorkItems": [
"2. 1の完成品のｴｱｰ圧(出代)を調整し､ﾛｯｸする",
"1. ①にREGULATOR を取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 11N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "11N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽﾊﾟﾅ",
"Size": "10㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立②",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立③",
"Words": [
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定",
"ﾏｰｷﾝｸﾞ箇所を合わせ束ねる"
],
"WorkItems": [
"2. 1の完成品を③へ接続し､配管を束ねる",
"1. TUBE TUBE を指定の長さに切断し､番号の記入及び束ねる位置にﾏｰｸする"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用",
"ﾏｰｷﾝｸﾞ測定側を接続する事",
"各継手の方向を下図に合わせる事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "100㎜",
"Other": "黒"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "ﾚｷﾞｭﾚｰﾀ部組立③",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｶｯﾀｰﾊﾞﾙﾌﾞ組立",
"Words": [
"この作業では同じものを2個製作"
],
"WorkItems": [
"1. BRACKET へMANIFOLD をBOLT で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 194cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"Other": "194cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "ｶｯﾀｰﾊﾞﾙﾌﾞ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "194cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "交換台車用ﾌﾞﾗｹｯﾄ組立",
"Words": [
"この作業では同じものを4個製作",
"10mm",
"A矢視",
"A矢視図",
"ﾌﾛﾝﾄ用",
"214L",
"213L",
"ﾘｱ用",
"216L",
"215L"
],
"WorkItems": [
"2. TUBE を指定の長さに切断､番号を記入し､1の完成品へ接続する",
"1. BRACKET へJOINT を取付ける"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用",
"FL､FR､RL､RRで識別する事"
],
"Tolks": [
"締付ﾄﾙｸ 11N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "BOXﾚﾝﾁ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "11N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28,29",
"使用治工具No.30,31"
]
} | [
{
"WorkName": "交換台車用ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "各11N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "交換台車用ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "台車駆動ﾊﾞﾙﾌﾞ配管準備",
"Words": [
"212L",
"221L",
"212R",
"221R",
"K068-1",
"K068-2",
"この作業では同じものを2個製作",
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定",
"ｲﾝｼｭﾛｯｸ頭の向きに注意"
],
"WorkItems": [
"1. TUBE を指定の長さに切断､番号を記入する",
"3. 1の完成品を2の完成品に接続する",
"2. JOINT へCABLE-SUPPORT を㉘で取付ける"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用",
"FT11の向きに注意し接続する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽｹｰﾙ",
"Size": "300㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "100㎜",
"Other": "黒"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "台車駆動ﾊﾞﾙﾌﾞ配管準備",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車+右側;ITF17連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"212R",
"212L"
],
"WorkItems": [
"1. BRACKET へVALVE VALVE を㉓BOLT で取付ける",
"2. 1の完成品へ②を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車+右側;ITF17連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車切替仕様+右側;ITF17連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"212R",
"212L"
],
"WorkItems": [
"1. BRACKET へVALVE VALVE を㉓BOLT で取付ける",
"2. 1の完成品へ②を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車切替仕様+右側;ITF17連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ﾄﾚｲﾌｨｰﾀﾞｰ+右側;ITF17連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"212R",
"212L"
],
"WorkItems": [
"1. BRACKET へVALVE をBOLT WASHER で取付ける",
"2. 1の完成品へ②JOINT を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ﾄﾚｲﾌｨｰﾀﾞｰ+右側;ITF17連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(ITF30連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"212R",
"212L"
],
"WorkItems": [
"1. BRACKET へVALVE をBOLT WASHER で取付け､JOINT を接続する",
"2. 1の完成品へ②JOINT を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾌﾛﾝﾄ台車駆動ﾊﾞﾙﾌﾞ組立(ITF30連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車+右側;ITF17連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"221R",
"221L"
],
"WorkItems": [
"1. BRACKET へVALVE VALVE を㉓BOLT で取付ける",
"2. 1の完成品へ②を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車+右側;ITF17連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車切替仕様+右側;ITF17連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"221R",
"221L"
],
"WorkItems": [
"1. BRACKET へVALVE VALVE を㉓BOLT で取付ける",
"2. 1の完成品へ②を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ITF17連台車切替仕様+右側;ITF17連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ﾄﾚｲﾌｨｰﾀﾞｰ+右側;ITF17連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"221R",
"221L"
],
"WorkItems": [
"1. BRACKET へVALVE をBOLT WASHER で取付ける",
"2. 1の完成品へ②JOINT を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(左側;ﾄﾚｲﾌｨｰﾀﾞｰ+右側;ITF17連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(ITF30連台車)",
"Words": [
"4番ﾎﾟｰﾄ",
"221R",
"221L"
],
"WorkItems": [
"1. BRACKET へVALVE をBOLT WASHER で取付け､JOINT を接続する",
"2. 1の完成品へ②JOINT を接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "OP;ﾘｱ台車駆動ﾊﾞﾙﾌﾞ組立(ITF30連台車)",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "【ﾌﾛﾝﾄ側ﾄﾚｲ仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"Words": [
"②の付属ﾅｯﾄ",
"ｺﾈｸﾀの向きに注意"
],
"WorkItems": [
"1. BRACKET へJOINT を取付ける",
"2. 1の完成品へCONNECTOR CONNECTOR をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "【ﾌﾛﾝﾄ側ﾄﾚｲ仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "【ﾌﾛﾝﾄ側ﾄﾚｲ切替仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"Words": [
"②の付属ﾅｯﾄ",
"ｺﾈｸﾀの向きに注意"
],
"WorkItems": [
"1. BRACKET へJOINT を取付ける",
"2. 1の完成品へCONNECTOR CONNECTOR をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "【ﾌﾛﾝﾄ側ﾄﾚｲ切替仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "【ﾘｱ側ﾄﾚｲ仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"Words": [
"②の付属ﾅｯﾄ",
"ｺﾈｸﾀの向きに注意"
],
"WorkItems": [
"1. BRACKET へJOINT を取付ける",
"2. 1の完成品へCONNECTOR CONNECTOR をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "【ﾘｱ側ﾄﾚｲ仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "【ﾘｱ側ﾄﾚｲ切替仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"Words": [
"②の付属ﾅｯﾄ",
"ｺﾈｸﾀの向きに注意"
],
"WorkItems": [
"1. BRACKET へJOINT を取付ける",
"2. 1の完成品へCONNECTOR CONNECTOR をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 60cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "60cN･m"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29"
]
} | [
{
"WorkName": "【ﾘｱ側ﾄﾚｲ切替仕様】ｺﾈｸﾀﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側ﾏﾆﾎｰﾙﾄﾞ組立",
"Words": [
"取付け方向に注意!この部品には方向性があります｡",
"33㎜",
"本体取付け穴",
"付属品(ｼｰﾙ付六角穴付ﾌﾟﾗｸﾞ)不要"
],
"WorkItems": [
"1. MANIFOLD へJOINT を取付ける",
"2. 1の完成品へJOINT JOINT JOINT JOINT を取付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "左側ﾏﾆﾎｰﾙﾄﾞ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "JOINT組立(XY軸ﾍﾞｱ配管)",
"Words": [
"この作業では同じものを2個製作",
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定"
],
"WorkItems": [
"1. JOINT JOINT CABLE-SUPPORT を㉖で束ねる"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "150㎜",
"Other": "白"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "JOINT組立(XY軸ﾍﾞｱ配管)",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管準備",
"Words": [],
"WorkItems": [
"1. TUBE TUBE TUBE TUBE TUBE TUBE を指定の長さに切断､番号を記入する"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "5m",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "左側束配管準備",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1.0㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管制作1",
"Words": [],
"WorkItems": [
"1. ㉖へ①を取付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管制作1",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作2",
"Words": [
"702RG(φ8白)",
"701RG(φ8白)",
"701RS(φ8白)",
"702RS(φ8白)"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作2",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作3",
"Words": [
"702LS(φ8白)",
"701LS(φ8白)",
"702LG(φ8白)",
"701LG(φ8白)"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作3",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作4",
"Words": [
"301S(φ6黄)",
"301G(φ6黄)",
"302S(φ6黄)",
"302G(φ6黄)",
"201RS(φ6黒)",
"201RG(φ6黒)"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作4",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作5",
"Words": [
"215RG(φ6黒)",
"215RS(φ6黒)",
"216RG(φ6黒)",
"216RS(φ6黒)"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作5",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作6",
"Words": [
"303FG(φ6黄)",
"303FS(φ6黄)",
"802G(φ12黒)",
"802S(φ12黒)",
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作6",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作7",
"Words": [
"202LG(φ6黒)",
"202LS(φ6黒)",
"203RG(φ6黒)",
"203RS(φ6黒)",
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作7",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作8",
"Words": [
"501G(φ8黒)",
"501S(φ8黒)",
"502G(φ8黒)",
"502S(φ8黒)",
"503G(φ8黒)",
"503S(φ8黒)",
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作8",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作9",
"Words": [
"504LG(φ8黒)",
"504LS(φ8黒)",
"505LG(φ8黒)",
"505LS(φ8黒)",
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作9",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作10",
"Words": [
"201LS(φ6黒)",
"201LG(φ6黒)",
"203LG(φ6黒)",
"203LS(φ6黒)",
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L",
"205FG(φ6黒)",
"205FS(φ6黒)"
],
"WorkItems": [
"1. ①②③を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作10",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作11",
"Words": [
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L",
"211G(φ6黒)",
"211S(φ6黒)"
],
"WorkItems": [
"1. ①を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作11",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作12",
"Words": [
"401G(φ6白)",
"401S(φ6白)",
"303RG(φ6黄)",
"303RS(φ6黄)"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作12",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作13",
"Words": [
"213RG(φ6黒)",
"213RS(φ6黒)",
"214RG(φ6黒)",
"214RS(φ6黒)"
],
"WorkItems": [
"1. ①②を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作13",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作14",
"Words": [
"801G(φ12黒)",
"801S(φ12黒)",
"203R",
"202L",
"205F",
"203L",
"201L",
"505L",
"504L"
],
"WorkItems": [
"1. ①を引き回す"
],
"WorkPoints": [
"S(始点)を基準にG(終点)まで引き回す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作14",
"QualityItem": "引き回確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示された経路で配管されている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作15",
"Words": [],
"WorkItems": [
"1. 配管を整え､結束する"
],
"WorkPoints": [
"結束及びCABLE-SUPPORT の取付位置はﾊｰﾈｽ板を参照"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "150㎜",
"Other": "白"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "200㎜",
"Other": "白"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28,29"
]
} | [
{
"WorkName": "左側束配管製作15",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作16",
"Words": [],
"WorkItems": [
"1. 配管を整え､結束する"
],
"WorkPoints": [
"結束及びCABLE-SUPPORT の取付位置はﾊｰﾈｽ板を参照"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "150㎜",
"Other": "白"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾆｯﾊﾟｰ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "左側束配管製作16",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "左側束配管製作17",
"Words": [
"701L",
"702L",
"201L",
"701R",
"702R",
"201R"
],
"WorkItems": [
"1. ①へ配管を接続する"
],
"WorkPoints": [
"接続位置はﾊｰﾈｽ板を参照"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"Size": "-",
"Other": "FM-6371"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "左側束配管製作17",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6371",
"ToolName": "ｴｱ配管ﾎﾞｰﾄﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "右側ﾏﾆﾎｰﾙﾄﾞ組立",
"Words": [
"34.5㎜",
"取付け方向に注意!この部品には方向性があります｡",
"44.5㎜",
"本体取付け穴",
"付属品(ｼｰﾙ付六角穴付ﾌﾟﾗｸﾞ)不要"
],
"WorkItems": [
"1. MANIFOLD へJOINT JOINT を取付ける",
"2. 1の完成品へJOINT を取付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "17㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "右側ﾏﾆﾎｰﾙﾄﾞ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "右側配管準備",
"Words": [],
"WorkItems": [
"1. TUBE TUBE を下記表の長さに切断する"
],
"WorkPoints": [
"両端より約50㎜に配管番号を記入する事 ･配管(白/黄) ⇒ 青ﾏｯｷｰ使用 ･配管(黒) ⇒ 黄色ﾏｰｶｰ使用"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "5m",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "右側配管準備",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1.0㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "右側配管製作",
"Words": [
"204R",
"202R",
"205R",
"204L",
"505R",
"504R"
],
"WorkItems": [
"1. ①へ②を接続する"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "右側配管製作",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)①",
"Words": [
"この作業では同じものを2個製作",
"基準:41.5mm",
"止まり:41.0mm",
"通り:42.0mm",
"41.5mmに調整し､通り42.0mm止まり41.0mmで確認する",
"3.3~4.3mm",
"切り欠き",
"穴3個が下に向く",
"面取り",
"面取り"
],
"WorkItems": [
"1. PLATE へNUT SCREW を取付ける",
"2. 1の完成品へNUT WASHER STOPPER を取付ける"
],
"WorkPoints": [
"SCREW の挿入面に注意",
"NUT をﾛｯｸする事",
"NUT の面取り向き注意",
"NUT の面取り向き注意"
],
"Tolks": [
"締付ﾄﾙｸ 39.0N･m",
"締付ﾄﾙｸ 39.0N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "6㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "39.0N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰ用ｾｯﾄﾋﾞｽ出代調整ｼﾞｸﾞ",
"Size": "-",
"Other": "FM-6633"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾉｷﾞｽ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰ\nｾｯﾄﾋﾞｽ締結用置台",
"Size": "-",
"Other": "FM-6667"
}
],
"Jigus": [
"使用治工具No.26,27,28,29,31",
"使用治工具No.27,28,30,31"
]
} | [
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)①",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "39.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)①",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6633",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰ用ｾｯﾄﾋﾞｽ出代調整ｼﾞｸﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)①",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6667",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰｾｯﾄﾋﾞｽ締結用置台",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)①",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ﾉｷﾞｽ",
"ToolCycle": "1回/年",
"ToolRecord": "校正成績書",
"StdVal": "3.3~4.3㎜",
"Method": "ﾉｷﾞｽ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)②",
"Words": [
"この作業では同じものを2個製作"
],
"WorkItems": [
"1. ①へCLIP をBOLT で取付ける"
],
"WorkPoints": [
"ｽﾄｯﾊﾟｰと反対の面にCLIP を取付ける事"
],
"Tolks": [
"締付ﾄﾙｸ 110cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "110cN･m"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(左前、右後)②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "110cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)①",
"Words": [
"この作業では同じものを2個製作",
"切り欠き",
"穴3個が下に向く",
"基準:41.5mm",
"止まり:41.0mm",
"通り:42.0mm",
"41.5mmに調整し､通り42.0mm止まり41.0mmで確認する",
"面取り",
"3.3~4.3mm",
"面取り"
],
"WorkItems": [
"1. PLATE へNUT SCREW を取付ける",
"2. 1の完成品へNUT WASHER STOPPER を取付ける"
],
"WorkPoints": [
"SCREW の挿入面に注意",
"NUT をﾛｯｸする事",
"NUT の面取り向き注意",
"NUT の面取り向き注意"
],
"Tolks": [
"締付ﾄﾙｸ 39.0N･m",
"締付ﾄﾙｸ 39.0N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "6㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "19㎜",
"Other": "39.0N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰ用ｾｯﾄﾋﾞｽ出代調整ｼﾞｸﾞ",
"Size": "-",
"Other": "FM-6633"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾉｷﾞｽ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰ\nｾｯﾄﾋﾞｽ締結用置台",
"Size": "-",
"Other": "FM-6667"
}
],
"Jigus": [
"使用治工具No.26,27,28,29,31",
"使用治工具No.27,28,30,31"
]
} | [
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)①",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "39.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)①",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6633",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰ用ｾｯﾄﾋﾞｽ出代調整ｼﾞｸﾞ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)①",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6667",
"ToolName": "Y軸ﾒｶｽﾄｯﾊﾟｰｾｯﾄﾋﾞｽ締結用置台",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)①",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ﾉｷﾞｽ",
"ToolCycle": "1回/年",
"ToolRecord": "校正成績書",
"StdVal": "3.3~4.3㎜",
"Method": "ﾉｷﾞｽ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)②",
"Words": [
"この作業では同じものを2個製作",
"押し付け",
"取付穴の位置に注意",
"長穴のｾﾝﾀｰで取付け"
],
"WorkItems": [
"1. ①へBLOCK をBOLT WASHER で取付ける",
"2. 1の完成品へCLIP SPACER をBOLT BOLT で取付ける"
],
"WorkPoints": [
"ｽﾄｯﾊﾟｰ面にBLOCK を取付ける事",
"ｽﾄｯﾊﾟｰと反対の面にBLOCK を取付ける事"
],
"Tolks": [
"締付ﾄﾙｸ 110cN･m",
"締付ﾄﾙｸ 3.2N･m",
"締付ﾄﾙｸ 9.8N･m",
"締付ﾄﾙｸ 110cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"Other": "9.8N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "110cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"Other": "3.2N･m"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29,30,31"
]
} | [
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "9.8N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "110cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ｽﾄｯﾊﾟｰ組立(右前、左後)②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｹｰﾌﾞﾙｻﾎﾟｰﾄ組立",
"Words": [],
"WorkItems": [
"1. PLATE にCABLE-SUPPORT を取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 4.0N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "32㎜",
"Other": "4.0N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾊﾞｲｽ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "BOXﾚﾝﾁ",
"Size": "32㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "ｹｰﾌﾞﾙｻﾎﾟｰﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "4.0N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "部品落下防止ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立",
"Words": [
"この作業では同じものを8個製作"
],
"WorkItems": [
"1. BRACKET へSPACER をBOLT WASHER で取付ける"
],
"WorkPoints": [
"㉘にクランプさせて作業実施"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "4㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"Other": "3.6N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾊﾞｲｽ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "部品落下防止ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.6N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｸﾞﾛﾒｯﾄ前準備",
"Words": [
"この作業では同じものを3個製作",
"縦横切り込み長さ;35㎜~40㎜"
],
"WorkItems": [
"1. GROMMET へ切り込みを入れる"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾊｻﾐ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "ｸﾞﾛﾒｯﾄ前準備",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "35~40㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "CPU固定ﾌﾞﾗｹｯﾄ組立",
"Words": [
"ﾌﾞﾗｹｯﾄ端面に合わせ貼付ける事",
"ﾌﾞﾗｹｯﾄ端面に合わせ貼付ける事"
],
"WorkItems": [
"1. BRACKET へCOVER を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "CPU固定ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "CPU固定ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "配線固定ﾌﾞﾗｹｯﾄ組立",
"Words": [
"この作業では同じものを2個製作",
"8mm"
],
"WorkItems": [
"1. BRACKET へCOVER を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "配線固定ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "前面下ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立",
"Words": [
"この作業では同じものを4個製作",
"1.5㎜",
"2.5㎜",
"切断",
"端面合わせ"
],
"WorkItems": [
"1. SHEET へTAPE を貼付け､SHEET と同じ長さでTAPE を切断する",
"2. 1の完成品をBRACKET へ貼付ける",
"3. 2の完成品にSPACER をBOLT NUT で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾊｻﾐ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"Other": "3.2N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.27,28",
"使用治工具No.29,30,31"
]
} | [
{
"WorkName": "前面下ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "前面下ｶﾊﾞｰﾌﾞﾗｹｯﾄ組立",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "中継ﾌﾞﾗｹｯﾄ組立①",
"Words": [
"ﾌﾞﾗｹｯﾄのR部にかからない様貼付ける事",
"この作業では同じものを2個製作"
],
"WorkItems": [
"1. BRACKET へBUSH を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26"
]
} | [
{
"WorkName": "中継ﾌﾞﾗｹｯﾄ組立①",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "中継ﾌﾞﾗｹｯﾄ組立①",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "中継ﾌﾞﾗｹｯﾄ組立②",
"Words": [
"ﾗﾍﾞﾙ貼付面",
"3mm",
"11mm",
"ﾌﾛﾝﾄ側",
"ﾘｱ側",
"4mm",
"3mm",
"11mm",
"4mm"
],
"WorkItems": [
"1. BRACKET へLABEL を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "中継ﾌﾞﾗｹｯﾄ組立②",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "銘板・警告ﾗﾍﾞﾙ貼付",
"Words": [
"112mm",
"117mm",
"5mm",
"54mm"
],
"WorkItems": [
"1. COVER へLABEL LABEL LABEL を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "銘板・警告ﾗﾍﾞﾙ貼付",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備(本体ﾕﾆｯﾄ)①",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [
"員数を確認する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(本体ﾕﾆｯﾄ)①",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備(本体ﾕﾆｯﾄ)②",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [
"員数を確認する事",
"仕様を確認し､払い出す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(本体ﾕﾆｯﾄ)②",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備(XYﾕﾆｯﾄ)",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(XYﾕﾆｯﾄ)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備(銘板・警告ﾗﾍﾞﾙ)",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [
"員数を確認する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(銘板・警告ﾗﾍﾞﾙ)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備(ﾄﾚｲ仕様)",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [
"ﾄﾚｲ仕様時に払い出す"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(ﾄﾚｲ仕様)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備;17連(前左、後左)、30連(前、後)、17連切替(前、後)仕様",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [
"仕様を確認し､払い出す事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備;17連(前左、後左)、30連(前、後)、17連切替(前、後)仕様",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B1工程前準備（001-",
"WorkName": "ｽﾙｰ部品準備(ﾃﾞｭｱﾙｺﾝﾍﾞﾔｰ仕様)",
"Words": [],
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [
"ﾃﾞｭｱﾙｺﾝﾍﾞﾔｰ仕様時に払い出す"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(ﾃﾞｭｱﾙｺﾝﾍﾞﾔｰ仕様)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ﾌﾞﾗｹｯﾄ組立",
"Words": [
"ｴｯｼﾞｶﾊﾞｰの角と角を合わせる",
"Rにかからない様に貼付け",
"取付け方向に注意!この部品には方向性があります",
"取付け方向に注意!この部品には方向性があります",
"ｴｯｼﾞｶﾊﾞｰの角と角を合わせる",
"ｴｯｼﾞｶﾊﾞｰの角と角を合わせる",
"ｴｯｼﾞｶﾊﾞｰの角と角を合わせる",
"この作業では同じものを2個製作",
"切り欠き"
],
"WorkItems": [
"1. COVER COVER BUSH を指定の長さに切断する",
"3. 1の完成品をBRACKET へ貼付ける",
"4. 2の完成品へ3の完成品をBOLT で取付ける",
"2. 1の完成品をBRACKET へ貼付ける"
],
"WorkPoints": [
"COVER ⇒32㎜;8本",
"COVER ⇒21㎜;4本",
"BUSH ⇒16㎜;2本"
],
"Tolks": [
"締付ﾄﾙｸ 95cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾚﾝﾁ",
"Size": "2㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"Other": "95cN･m"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.27,28",
"使用治工具No.28",
"使用治工具No.29,30"
]
} | [
{
"WorkName": "ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾌﾞﾗｹｯﾄ組立",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "95cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｶﾞｲﾄﾞ組立",
"Words": [
"①がR部にかからない様に貼付け",
"この作業では同じものを2個製作",
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定"
],
"WorkItems": [
"2. 1の完成品をGUIDE へ貼付け、㉘をセットする",
"1. COVER を指定の長さに切断する"
],
"WorkPoints": [
"105㎜;2本"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "200㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28"
]
} | [
{
"WorkName": "ｶﾞｲﾄﾞ組立",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｶﾒﾗﾘﾝｸｹｰﾌﾞﾙ中継ﾕﾆｯﾄ組立",
"Words": [
"この作業では同じものを2個製作",
"②を下図の様に変形する",
"3ｺﾏ",
"2ｺﾏ",
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定"
],
"WorkItems": [
"2. 1の完成品へBRACKET をBOLT WASHER NUT で取付ける",
"3. 2の完成品に㉛を３本通す",
"◆1. PLATE へBUSH を貼付ける"
],
"WorkPoints": [
"R部は入念に押し付け貼付ける事",
"取付けは端面方向へ押し付ける事",
"約半分通し､縛ら無い事"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [
"◆作業者安全作業",
"◆作業者安全作業"
],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾋﾟﾝｾｯﾄ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "保護ﾒｶﾞﾈ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽﾊﾟﾅ",
"Size": "5.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "150cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ｲﾝｼｭﾛｯｸ",
"Size": "100㎜",
"Other": "黒"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.28,29,30",
"使用治工具No.31"
]
} | [
{
"WorkName": "ｶﾒﾗﾘﾝｸｹｰﾌﾞﾙ中継ﾕﾆｯﾄ組立",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "保護ﾒｶﾞﾈ",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ｶﾒﾗﾘﾝｸｹｰﾌﾞﾙ中継ﾕﾆｯﾄ組立",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "Y軸ﾍﾞｱﾀﾞｸﾄ組立",
"Words": [
"②を㉗へ押し付け",
"②を㉗へ押し付け",
"②を㉗へ押し付け",
"開口部端面合わせ",
"㉗押し付け",
"Dｶｯﾄ",
"②を㉗へ押し付け",
"②を㉗へ押し付け",
"②を㉗へ押し付け",
"㉗取付け方向",
"開口部端面合わせ",
"①の穴と⑯の穴を合わせる",
"この作業では同じものを2個製作",
"接着剤塗布 ｺﾞﾏ粒:各1",
"治具移動",
"治具移動"
],
"WorkItems": [
"1. DUCT へSHEET を貼付ける",
"2. 1の完成品へSHEET を貼付ける",
"▲◆3. 2の完成品へWASHER を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [
"▲特殊作業",
"◆作業者安全作業",
"◆作業者安全作業",
"▲特殊作業"
],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "Y軸ﾍﾞｱ受けｼｰﾄ\n位置決めｼﾞｸﾞ",
"Size": "-",
"Other": "FM-6631"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾛｯｸﾀｲﾄ",
"Size": "-",
"Other": "415"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "保護ﾒｶﾞﾈ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾋﾟﾝｾｯﾄ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.26,27",
"使用治工具No.28,29,30"
]
} | [
{
"WorkName": "Y軸ﾍﾞｱﾀﾞｸﾄ組立",
"QualityItem": "取付確認",
"ToolManageNo": "FM-6631",
"ToolName": "治具",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ﾍﾞｱﾀﾞｸﾄ組立",
"QualityItem": "接着量",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "ｺﾞﾏ粒;各1",
"Method": "目視",
"RecordMethod": "-",
"Others": "ﾛｯｸﾀｲﾄ415",
"ProcessNames": [
"-"
]
},
{
"WorkName": "Y軸ﾍﾞｱﾀﾞｸﾄ組立",
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "保護ﾒｶﾞﾈ",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "LED照明制御ﾎﾞｰﾄﾞ準備",
"Words": [
"CN15",
"Dip-SW 8",
"CN19",
"or"
],
"WorkItems": [
"★2. Dip-SW8番をONにする",
"★1. LED LIGHTING CONTROL BOARD orLED LIGHTING CONTROL BOARD へCABLE を接続する"
],
"WorkPoints": [
"CN15､CN19に接続する",
"仕様員数通り(標準ﾍｯﾄﾞｶﾒﾗ､文字認識ﾍｯﾄﾞｶﾒﾗ)に制作する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [
"★静電対策作業",
"★静電対策作業"
],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "LED照明制御ﾎﾞｰﾄﾞ準備",
"QualityItem": "接続確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "XY軸F側配線ｺﾈｸﾀ接続",
"Words": [
"V(A)K502",
"U(A)K502",
"UK501",
"VK501",
"幅;20mm",
"銘板",
"WK501",
"X軸 ﾄﾞﾗｲﾊﾞ付属品",
"Y軸 ﾄﾞﾗｲﾊﾞ付属品",
"Y軸 ﾄﾞﾗｲﾊﾞ付属品",
"幅;25mm",
"幅;25mm",
"W(A)K502",
"V(B)K502",
"U(B)K502",
"W(B)K502",
"端子凸凹面",
"銘板",
"端子凸凹面",
"⑥はB1工程前準備より受け取る",
"⑦はB1工程前準備より受け取る",
"･端子凸凹面をｺﾈｸﾀの銘板側に向け､奥まで挿入する事･挿入後､ｹｰﾌﾞﾙを引っ張り抜け無い事",
"･端子凸凹面をｺﾈｸﾀの銘板側に向け､奥まで挿入する事･挿入後､ｹｰﾌﾞﾙを引っ張り抜け無い事"
],
"WorkItems": [
"■1. XY-AXIS FRONT SIDE WIRING:NPM-GW へ⑥を接続する",
"■2. 1の完成品へ⑦を接続する"
],
"WorkPoints": [
"⑥のｻｲｽﾞに注意する事(ｺﾈｸﾀ幅;20㎜)",
"差込み治具は使用後､取り外す事",
"⑦のｻｲｽﾞに注意する事(ｺﾈｸﾀ幅;25㎜)",
"差込み治具は使用後､取り外す事"
],
"Tolks": [],
"InspectionItems": [
"検査表①:2.ﾄﾞﾗｲﾊﾞ設定(3)ｺﾈｸﾀ端子接続",
"検査表①:2.ﾄﾞﾗｲﾊﾞ設定(3)ｺﾈｸﾀ端子接続"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "XY軸F側配線ｺﾈｸﾀ接続",
"QualityItem": "接続確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "XY軸R側配線ｺﾈｸﾀ接続",
"Words": [
"V(A)K504",
"U(A)K504",
"UK503",
"VK503",
"幅;20mm",
"WK503",
"X軸 ﾄﾞﾗｲﾊﾞ付属品",
"Y軸 ﾄﾞﾗｲﾊﾞ付属品",
"Y軸 ﾄﾞﾗｲﾊﾞ付属品",
"幅;25mm",
"幅;25mm",
"W(A)K504",
"V(B)K504",
"U(B)K504",
"W(B)K504",
"端子の凹凸面にする",
"銘板",
"端子凸凹面",
"端子の凹凸面にする",
"銘板",
"端子凸凹面",
"⑥はB1工程前準備より受け取る",
"⑦はB1工程前準備より受け取る",
"･端子凸凹面をｺﾈｸﾀの銘板側に向け､奥まで挿入する事･挿入後､ｹｰﾌﾞﾙを引っ張り抜け無い事",
"･端子凸凹面をｺﾈｸﾀの銘板側に向け､奥まで挿入する事･挿入後､ｹｰﾌﾞﾙを引っ張り抜け無い事"
],
"WorkItems": [
"■1. XY-AXIS REAR SIDE WIRING:NPM-GW へ⑥を接続する",
"■2. 1の完成品へ⑦を接続する"
],
"WorkPoints": [
"⑥のｻｲｽﾞに注意する事(ｺﾈｸﾀ幅;20㎜)",
"差込み治具は使用後､取り外す事",
"差込み治具は使用後､取り外す事",
"⑦のｻｲｽﾞに注意する事(ｺﾈｸﾀ幅;25㎜)"
],
"Tolks": [],
"InspectionItems": [
"検査表①:2.ﾄﾞﾗｲﾊﾞ設定(3)ｺﾈｸﾀ端子接続",
"検査表①:2.ﾄﾞﾗｲﾊﾞ設定(3)ｺﾈｸﾀ端子接続"
],
"InspectionNos": [
"WETE-G002-D04"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "XY軸R側配線ｺﾈｸﾀ接続",
"QualityItem": "接続確認",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "WETE-G002-D04",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "銘板・警告ﾗﾍﾞﾙ貼付(ﾏｸﾞﾈｯﾄｶﾊﾞｰ)",
"Words": [
"貼付け面",
"下面合わせ",
"200mm",
"貼付け面",
"200mm",
"下面合わせ",
"この作業では同じものを2個製作",
"この作業では同じものを2個製作"
],
"WorkItems": [
"2. COVER へLABEL を貼付ける(左前､右奥)",
"1. COVER へLABEL を貼付ける(右前､左奥)"
],
"WorkPoints": [
"貼付け面に注意!この部品には方向性があります"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "600㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.26,27"
]
} | [
{
"WorkName": "銘板・警告ﾗﾍﾞﾙ貼付(ﾏｸﾞﾈｯﾄｶﾊﾞｰ)",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "銘板・警告ﾗﾍﾞﾙ貼付(ﾍｯﾄﾞ部ｶﾊﾞｰ)",
"Words": [
"17mm",
"4mm",
"1mm",
"17mm",
"4mm"
],
"WorkItems": [
"1. COVER へLABEL LABEL を貼付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "銘板・警告ﾗﾍﾞﾙ貼付(ﾍｯﾄﾞ部ｶﾊﾞｰ)",
"QualityItem": "貼付確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｽﾙｰ部品準備(本体ﾕﾆｯﾄ)",
"Words": [],
"WorkItems": [
"1. 次工程に払い出す"
],
"WorkPoints": [
"員数を確認する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(本体ﾕﾆｯﾄ)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｽﾙｰ部品準備(XYﾕﾆｯﾄ)①",
"Words": [],
"WorkItems": [
"1. 次工程に払い出す"
],
"WorkPoints": [
"員数を確認する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(XYﾕﾆｯﾄ)①",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｽﾙｰ部品準備(XYﾕﾆｯﾄ)②",
"Words": [],
"WorkItems": [
"1. 次工程に払い出す"
],
"WorkPoints": [
"員数を確認する事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(XYﾕﾆｯﾄ)②",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｽﾙｰ部品準備(標準ﾍｯﾄﾞｶﾒﾗ)",
"Words": [],
"WorkItems": [
"1. 次工程に払い出す"
],
"WorkPoints": [
"仕様の員数通りに払い出しする事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(標準ﾍｯﾄﾞｶﾒﾗ)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：B2工程前準備（201-",
"WorkName": "ｽﾙｰ部品準備(文字認識対応ﾍｯﾄﾞｶﾒﾗ)",
"Words": [],
"WorkItems": [
"1. 次工程に払い出す"
],
"WorkPoints": [
"OP;高さｾﾝｻ仕様がある場合はCLIP BOLT 払出不要",
"仕様の員数通りに払い出しする事"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [],
"Jigus": []
} | [
{
"WorkName": "ｽﾙｰ部品準備(文字認識対応ﾍｯﾄﾞｶﾒﾗ)",
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "ｸﾞﾛﾒｯﾄ前準備",
"Words": [
"縦横 約30㎜",
"この作業では同じものを6個製作"
],
"WorkItems": [
"1. GROMMET GROMMET に切り込みを入れる",
"2. 次工程(H1工程)へ払い出す"
],
"WorkPoints": [
"ｸﾞﾛﾒｯﾄ6個共に切れ込みを入れる"
],
"Tolks": [],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "はさみ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27"
]
} | [
{
"WorkName": "ｸﾞﾛﾒｯﾄ前準備",
"QualityItem": "作業確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示通りの寸法で出来ていること指示寸法±1㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "部品廃棄BOX前段取り①",
"Words": [
"この作業では同じものを4個製作",
"長い",
"短い",
"取付け方向に注意!この部品には方向性があります｡"
],
"WorkItems": [
"1. ROD にSCREW を取付ける",
"2. ROD に防錆油㉘を塗布する"
],
"WorkPoints": [
"SCREW がROD の底付きするところまで締める",
"ｶｯﾄ部の位置に注意"
],
"Tolks": [
"締付ﾄﾙｸ 5.3N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽﾊﾟﾅ",
"Size": "11㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾚﾝﾁ",
"Size": "3㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"Other": "5.3N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "防錆油･ｺﾞﾑ手袋",
"Size": "-",
"Other": "ｴﾊﾞｰｽ"
}
],
"Jigus": [
"使用治工具No.26,27,28",
"使用治工具No.29"
]
} | [
{
"WorkName": "部品廃棄BOX前段取り①",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "5.3N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "部品廃棄BOX前段取り②",
"Words": [
"この作業では同じものを2個製作"
],
"WorkItems": [
"1. ①に②と⑯を取付ける",
"2. 1完成品に③を取付ける"
],
"WorkPoints": [
"上方向に押し当てる",
"③C2面取り4箇所確認のこと",
"NUTの方向に注意"
],
"Tolks": [
"締付ﾄﾙｸ 40cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "5.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "5.5㎜",
"Other": "40cN･m"
}
],
"Jigus": [
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "部品廃棄BOX前段取り②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "40cN･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "部品廃棄BOX前段取り③",
"Words": [
"F用(ﾌﾛﾝﾄ)",
"R用(ﾘｱ)",
"30mm",
"39mm"
],
"WorkItems": [
"4. 3完成品に⑤を⑲⑳で取付",
"3. 2完成品に③を④㉑で取付（2か所）",
"2. 1完成品に②を⑯⑰⑱で取付",
"1. ①に⑥を貼付"
],
"WorkPoints": [
"③の向きに注意",
"ｾﾝｻのｺﾈｸﾀ挿入口(白色)がﾌﾞﾗｹｯﾄの折り曲げ方向",
"①の貼付ける箇所をｱﾙｺｰﾙにて清掃",
"ｺﾈｸﾀ差込み口"
],
"Tolks": [
"締付ﾄﾙｸ 40cN･m",
"締付ﾄﾙｸ 110cN･m",
"締付ﾄﾙｸ 95cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "40cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "110cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "95cN･m"
}
],
"Jigus": [
"使用治工具No.26,28",
"使用治工具No.26,31",
"使用治工具No.26,27",
"使用治工具No.29,30"
]
} | [
{
"WorkName": "部品廃棄BOX前段取り③",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "40cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "部品廃棄BOX前段取り③",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "110cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "部品廃棄BOX前段取り③",
"QualityItem": "貼付確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けてある事指示寸法±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り①",
"Words": [
"短い方",
"長い方",
"この作業では同じものを2個製作",
"この作業では同じものを6個製作",
"36㎜",
"1㎜"
],
"WorkItems": [
"2. BRACKET にLABEL を貼付ける",
"1. POST にSCREW を取付ける"
],
"WorkPoints": [
"BRACKET の貼付ける箇所をｱﾙｺｰﾙにて清掃",
"SCREW がPOST の底付きするところまで締める",
"POST の部品の方向に注意",
"切り欠きから端面まで短い方にSCREW を取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 5.3N･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "4㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "10㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"Other": "5.3N･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.29,30",
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り①",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "5.3N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り①",
"QualityItem": "貼付確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けてある事指示寸法±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り②",
"Words": [
"この作業では同じものを2個製作"
],
"WorkItems": [
"1. ①にBRACKET をBOLT WASHER で取付ける",
"2. VALVE にJOINT SILENCER JOINT を取付ける"
],
"WorkPoints": [
"この作業では同じものを各2個製作"
],
"Tolks": [
"締付ﾄﾙｸ 120cN･m",
"締付ﾄﾙｸ 120cN･m",
"締付ﾄﾙｸ 95cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "95cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ﾗｼﾞｵﾍﾟﾝﾁ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "7㎜",
"Other": "120cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ｽﾊﾟﾅ",
"Size": "10㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,28",
"使用治工具No.27,29,30,31"
]
} | [
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り②",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示通りの寸法で出来ていること指示寸法±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り②",
"QualityItem": "締結ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "95cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り②",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "各120cN･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り③",
"Words": [
"この作業では同じものを2個製作"
],
"WorkItems": [
"4. 2完成品に3完成品を接続する",
"1. ①に②をBOLT WASHER WASHER NUT で取付ける",
"2. 1完成品にJOINT をBOLT WASHER WASHER で取付ける",
"3. TUBE を指定の長さに切る"
],
"WorkPoints": [
"TUBE は下側に接続",
"②の部品の方向に注意",
"JOINT の部品の方向に注意",
"Φ6黒:115mm×2ｹ",
"TUBE 接続"
],
"Tolks": [
"締付ﾄﾙｸ 45cN･m",
"締付ﾄﾙｸ 50cN･m"
],
"InspectionItems": [],
"InspectionNos": [],
"WorkTypes": [],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "45cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "50cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.30",
"ToolName": "ﾁｭｰﾌﾞｶｯﾀｰ",
"Size": "-",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.31",
"ToolName": "ｽﾊﾟﾅ",
"Size": "5.5㎜",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,27",
"使用治工具No.29,30",
"使用治工具No.26,28,31"
]
} | [
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り③",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "45cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り③",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "50cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "ﾍｯﾄﾞｵﾌﾟｼｮﾝ駆動部前段取り③",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示通りの寸法で出来ていること指示寸法±1㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
}
] | information_extraction | 0 | null | |
{
"UnitName": "NPM-GW ：H1工程前準備（301-",
"WorkName": "開口部ｾﾝｻｰ組立1",
"Words": [
"7㎜",
"7㎜",
"この作業では同じものを各2個製作"
],
"WorkItems": [
"3. 2完成品にSENSOR をBOLT WASHER で取付",
"2. BRACKET にLABEL LABEL を貼付",
"■1. SENSOR の型式を確認し､ﾛｯﾄNoを検査書に記入"
],
"WorkPoints": [
"投光側･受光側の取付に注意",
"3芯",
"4芯",
"型式",
"ﾛｯﾄ№(製造番号)",
"投光側B1046TB1047T",
"受光側B1046B1047",
"ﾌﾞﾗｹｯﾄより7㎜位置で取付",
"ｾﾝｻ取付け前に検査表記入の事"
],
"Tolks": [
"締付ﾄﾙｸ 45cN･m"
],
"InspectionItems": [
"検査表①:型式･検査書ﾁｪｯｸ"
],
"InspectionNos": [
"WETE-G002-D06"
],
"WorkTypes": [
"■安全作業"
],
"ToolPartsModels": [
{
"JiguNo": "使用治工具Ｎｏ.26",
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.27",
"ToolName": "ﾚﾝﾁ",
"Size": "2.5㎜",
"Other": "-"
},
{
"JiguNo": "使用治工具Ｎｏ.28",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"Other": "45cN･m"
},
{
"JiguNo": "使用治工具Ｎｏ.29",
"ToolName": "ｱﾙｺｰﾙ･ｳｴｽ･ｺﾞﾑ手袋",
"Size": "-",
"Other": "-"
}
],
"Jigus": [
"使用治工具No.26,29",
"使用治工具No.26,27,28"
]
} | [
{
"WorkName": "開口部ｾﾝｻｰ組立1",
"QualityItem": "貼付確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けてある事指示寸法±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "開口部ｾﾝｻｰ組立1",
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolName": "ｽｹｰﾙ",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "ﾌﾞﾗｹｯﾄより7㎜±0.5㎜位置で取付",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "開口部ｾﾝｻｰ組立1",
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "45cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Others": "-",
"ProcessNames": [
"-"
]
},
{
"WorkName": "開口部ｾﾝｻｰ組立1",
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolName": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式･検査書確認､及びｼﾘｱﾙNo.転記",
"Method": "目視",
"RecordMethod": "WETE-G002-D06",
"Others": "-",
"ProcessNames": [
"安全工程"
]
}
] | information_extraction | 0 | null |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.