commit stringlengths 40 40 | old_file stringlengths 2 205 | new_file stringlengths 2 205 | old_contents stringlengths 0 32.9k | new_contents stringlengths 1 38.9k | subject stringlengths 3 9.4k | message stringlengths 6 9.84k | lang stringlengths 3 13 | license stringclasses 13
values | repos stringlengths 6 115k |
|---|---|---|---|---|---|---|---|---|---|
b2d7333706b56ae505737451d922df81e92340eb | examples/mqtt_arbitrary_data/mqtt_arbitrary_data.ino | examples/mqtt_arbitrary_data/mqtt_arbitrary_data.ino | /***************************************************
Adafruit MQTT Library Arbitrary Data Example
Must use ESP8266 Arduino from:
https://github.com/esp8266/Arduino
Works great with Adafruit's Huzzah ESP board & Feather
----> https://www.adafruit.com/product/2471
----> https://www.adafruit.com/products/2... | /***************************************************
Adafruit MQTT Library Arbitrary Data Example
Must use ESP8266 Arduino from:
https://github.com/esp8266/Arduino
Works great with Adafruit's Huzzah ESP board & Feather
----> https://www.adafruit.com/product/2471
----> https://www.adafruit.com/products/2... | Clean up | Clean up
| Arduino | mit | adafruit/Adafruit_MQTT_Library |
e9dd4478647821bfbea730881f1bfe39f9868fea | examples/BoardsAndShields/Arduino_WiFi/Arduino_WiFi.ino | examples/BoardsAndShields/Arduino_WiFi/Arduino_WiFi.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Update Arduino_WiFi.ino | Update Arduino_WiFi.ino | Arduino | mit | ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,ivankravets/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library |
05d1d4f13cb31fb9b1202ab45aa113f87ad09135 | binary_clock.ino | binary_clock.ino | #include <Wire.h>
#include "TM1637.h"
#include "LedControlMS.h"
// Кнопки настроек
#define SETTINGS_MODE A0 // Выбор режима
#define SETTINGS_UP A1 // Вверх
#define SETTINGS_DOWN A2 // Вниз
// Адрес модуля ds3231 на шине I2C
#define DS3231_I2C_ADDRESS 0x68
// Объект для работы со светодиодной матрицей
/*
* Подк... | #include <Wire.h>
#include "LedControlMS.h"
// Кнопки настроек
#define SETTINGS_MODE A0 // Выбор режима
#define SETTINGS_UP A1 // Вверх
#define SETTINGS_DOWN A2 // Вниз
// Адрес модуля ds3231 на шине I2C
#define DS3231_I2C_ADDRESS 0x68
// Объект для работы со светодиодной матрицей
/*
* Подключение
* DIN - 12
... | remove TM1637 lib include | remove TM1637 lib include
| Arduino | mit | AlexanderPopov/binary-clock |
0c804490097e1669c32a48976fa2f5fc882abdf4 | firmware/examples/ADXL362_SimpleRead/ADXL362_SimpleRead.ino | firmware/examples/ADXL362_SimpleRead/ADXL362_SimpleRead.ino | /*
ADXL362_SimpleRead.ino - Simple XYZ axis reading example
for Analog Devices ADXL362 - Micropower 3-axis accelerometer
go to http://www.analog.com/ADXL362 for datasheet
License: CC BY-SA 3.0: Creative Commons Share-alike 3.0. Feel free
to use and abuse this code however you'd like. If you find it useful
p... | /*
ADXL362_SimpleRead.ino - Simple XYZ axis reading example
for Analog Devices ADXL362 - Micropower 3-axis accelerometer
go to http://www.analog.com/ADXL362 for datasheet
License: CC BY-SA 3.0: Creative Commons Share-alike 3.0. Feel free
to use and abuse this code however you'd like. If you find it useful
p... | Update ADXL362_SimpleRead.ino | Update ADXL362_SimpleRead.ino | Arduino | cc0-1.0 | gregoryfenton/adxl362 |
850d83067d7d66baf0c22367808958d0881822c6 | examples/Boards_GSM/TinyGSM_MKR1400/TinyGSM_MKR1400.ino | examples/Boards_GSM/TinyGSM_MKR1400/TinyGSM_MKR1400.ino | /*************************************************************
Download latest Blynk library here:
https://github.com/blynkkk/blynk-library/releases/latest
Blynk is a platform with iOS and Android apps to control
Arduino, Raspberry Pi and the likes over the Internet.
You can easily build graphic interfaces... | /*************************************************************
Download latest Blynk library here:
https://github.com/blynkkk/blynk-library/releases/latest
Blynk is a platform with iOS and Android apps to control
Arduino, Raspberry Pi and the likes over the Internet.
You can easily build graphic interfaces... | Initialize MKR 1400 modem properly | Initialize MKR 1400 modem properly
| Arduino | mit | blynkkk/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library,blynkkk/blynk-library |
7deb25a47741e8fb66b74ae31ea584a59d6c4797 | Claw/Claw_controller/Claw_stagnation_recognition.ino | Claw/Claw_controller/Claw_stagnation_recognition.ino | bool ClawStagnation(int &teller, int buttonState, int &vorigeStatus)
{
bool grabdingStaatStil;
if (buttonState = vorigeStatus )
{
teller ++;
}
if (teller >= 30)
{
grabdingStaatStil = true;
}
vorigeStatus = buttonState;
return grabdingStaatStil;
}
| bool ClawStagnation(int &teller, int buttonState, int &vorigeStatus)
{
bool grabdingStaatStil;
if (buttonState == vorigeStatus )
{
teller ++;
}
if (teller >= 30)
{
grabdingStaatStil = true;
}
vorigeStatus = buttonState;
return grabdingStaatStil;
}
| Update Claw_stagnation_recognition.ino | Update Claw_stagnation_recognition.ino | Arduino | mit | IrisEdelsmid/arduinoFun |
0bcf464382b31b1918a299e4c1b4416262426afd | examples/03-Intermediate/WDRC_SingleBand/WDRC_SingleBand.ino | examples/03-Intermediate/WDRC_SingleBand/WDRC_SingleBand.ino | #include <Tympan_Library.h>
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
// GUItool: begin automatically generated code
AudioInputI2S_F32 i2sAudioIn1; //xy=136,112
AudioFilterIIR_F32 iir1; //xy=233,172
AudioEffectCompWDRC_F32 compWDRC1; ... | #include <Tympan_Library.h>
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>
// GUItool: begin automatically generated code
AudioInputI2S_F32 i2sAudioIn1; //xy=136,112
AudioFilterBiquad_F32 iir1; //xy=233,172
AudioEffectCompWDRC_F32 compWDRC1; ... | Update WDRC_SingleBand.ino | Update WDRC_SingleBand.ino
WDRC_SingleBand: changed AudioFilterIIR_F32 to AudioFilterBiquad_F32 | Arduino | mit | Tympan/Tympan_Library,Tympan/Tympan_Library,Tympan/Tympan_Library |
feac74804a4c59e9c76368deba16d363ceb4e71a | AP_routines.ino | AP_routines.ino | //part of aquacontrol
//captive portal
//ideas and code stolen from:
//https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortal/CaptivePortal.ino
//https://github.com/esp8266/Arduino/blob/master/libraries/ESP8266WebServer/examples/AdvancedWebServer/AdvancedWebServer.ino
//http://www.jo... | //part of aquacontrol
//captive portal
//ideas and code stolen from:
//https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortal/CaptivePortal.ino
//https://github.com/esp8266/Arduino/blob/master/libraries/ESP8266WebServer/examples/AdvancedWebServer/AdvancedWebServer.ino
//http://www.jo... | Change OLED messages when in access point mode. | Change OLED messages when in access point mode.
Show accespoint name and IP adress in OLED when in access point mode. | Arduino | mit | CelliesProjects/aquacontrol |
f7797ee33cf8f15b6b702260547c73a3c66e356b | examples/test/test.ino | examples/test/test.ino | /***************************************************
This is a example sketch demonstrating bitmap drawing
capabilities of the SSD1351 library for the 1.5"
16-bit Color OLED with SSD1351 driver chip
Pick one up today in the adafruit shop!
------> http://www.adafruit.com/products/1431
These displays use... | /***************************************************
This is a example sketch demonstrating graphic drawing
capabilities of the SSD1351 library for the 1.5"
and 1.27" 16-bit Color OLEDs with SSD1351 driver chip
Pick one up today in the adafruit shop!
------> http://www.adafruit.com/products/1431
------> ... | Fix comments | Fix comments
Header comment got loused up in the last commit | Arduino | bsd-3-clause | osmithy/Adafruit_SSD1351,osmithy/Adafruit_SSD1351,shiitakeo/Adafruit-SSD1351-library,shiitakeo/Adafruit-SSD1351-library |
4a85c58f881c27e9526b6a36262702b88b4726f0 | CalibrateATtiny85OSCCAL.ino | CalibrateATtiny85OSCCAL.ino | /*
CalibrateATtiny85OSCCAL: Tweak the OSCCAL register to calibrate the internal oscillator of the ATtiny85.
Copyright Jason Pepas (Pepas Labs, LLC)
Released under the terms of the MIT License.
see https://learn.sparkfun.com/tutorials/serial-communication
in particular: https://dlnmh9ip6v2uc.cloudfront.net/assets/1... | /*
CalibrateATtiny85OSCCAL: Tweak the OSCCAL register to calibrate the internal oscillator of the ATtiny85.
Copyright Jason Pepas (Pepas Labs, LLC)
Released under the terms of the MIT License.
see https://learn.sparkfun.com/tutorials/serial-communication
in particular: https://dlnmh9ip6v2uc.cloudfront.net/assets/1... | remove function which prints 1000 chars. add 50 'U' chars to every OSCCAL printout. | remove function which prints 1000 chars. add 50 'U' chars to every OSCCAL printout.
| Arduino | mit | pepaslabs/CalibrateATtiny85OSCCAL |
8a59b256c57e972235174b364e3410742aa38293 | CS26410.ino | CS26410.ino | #include <SharpIR.h>
#include <NewPing.h>
#include <Servo.h>
#define LDRLeft A0
#define LDRCenter A1
#define LDRRight A2
#define LDRTop A4
#define SharpIr A3
#define SerialRx 0
#define SerialTx 1
#define IrRx 2
#define IrTx 3
#define PB1 4
#define Dright 5
#define Dleft 6
#define LEDRed 7
#define Ping1 8
#define Ping... |
//included librarys
#include <SharpIR.h>
#include <NewPing.h>
#include <Servo.h>
//analog pin definitions
#define LDRLeft A0
#define LDRCenter A1
#define LDRRight A2
#define LDRTop A4
#define SharpIr A3
//digital pin definitions
#define SerialRx 0
#define SerialTx ... | add suppot for robot control app | add suppot for robot control app
| Arduino | mit | naturesyouth/CS26410 |
327930f3fbc79630f398a3be74a6e030772d2f1c | examples/Multiple/ArrayOfLedArrays/ArrayOfLedArrays.ino | examples/Multiple/ArrayOfLedArrays/ArrayOfLedArrays.ino | // ArrayOfLedArrays - see https://github.com/FastLED/FastLED/wiki/Multiple-Controller-Examples for more info on
// using multiple controllers. In this example, we're going to set up four NEOPIXEL strips on three
// different pins, each strip getting its own CRGB array to be played with, only this time they're going
//... | // ArrayOfLedArrays - see https://github.com/FastLED/FastLED/wiki/Multiple-Controller-Examples for more info on
// using multiple controllers. In this example, we're going to set up three NEOPIXEL strips on three
// different pins, each strip getting its own CRGB array to be played with, only this time they're going
/... | Update ArrayOfLedArrays.ino | Update ArrayOfLedArrays.ino
Typo in comment, said four strips on three pins | Arduino | mit | FastLED/FastLED,remspoor/FastLED,tullo-x86/FastLED,kcouck/FastLED,tullo-x86/FastLED,PaulStoffregen/FastLED,remspoor/FastLED,PaulStoffregen/FastLED,eshkrab/FastLED-esp32,PaulStoffregen/FastLED,FastLED/FastLED,FastLED/FastLED,eshkrab/FastLED-esp32,kcouck/FastLED,FastLED/FastLED |
efb7a68f183da47ef694ecd78c49b0b2536ef9b6 | interrupts/timer_interrupt_dual_comp_registers.ino | interrupts/timer_interrupt_dual_comp_registers.ino | #include <Arduino.h>
/*
Combining compare interrupts COMPA and COMPB on Timer1
James H. Bannock
Norges teknisk-naturvitenskapelige universitet (NTNU)
This example makes the LED blink with a frequency of 0.5 Hz
Notes:
- to use both COMPA and COMPB the CTC (Clear Timer on Compare match) mode
must not be used, e... | #include <Arduino.h>
/*
Combining compare interrupts COMPA and COMPB on Timer1
James H. Bannock
Norges teknisk-naturvitenskapelige universitet (NTNU)
This example makes the LED blink with a frequency of 0.5 Hz
Notes:
- to use both COMPA and COMPB the CTC (Clear Timer on Compare match) mode
must not be used, e... | Update timer_interrupt_dual_comp_registers.ino | Update timer_interrupt_dual_comp_registers.ino | Arduino | mit | jdmgroup/robotchemistry |
588475e1617ada11b5f183bbf3f8aae97c76077f | Pan_Tilt_laser/Pan_Tilt_laser.ino | Pan_Tilt_laser/Pan_Tilt_laser.ino | /**************************************************************************/
/*!
@file Pan_Tilt_laser.ino
@author Stuart Feichtinger
@license BSD (see license.txt)
Main program running an automatic laser-turret cat toy using a pan-tilt
rig (https://www.adafruit.com/products/1967) and laser d... | /**************************************************************************/
/*!
@file Pan_Tilt_laser.ino
@author Stuart Feichtinger
@license BSD (see license.txt)
Main program running an automatic laser-turret cat toy using a pan-tilt
rig (https://www.adafruit.com/products/1967) and laser d... | Revert "Clean up" | Revert "Clean up"
This reverts commit 1cc41362a7edf90dbaecc19a8334832e626d1877.
| Arduino | mit | stuthedew/Arduino-Laser-Cat-Turret |
a6ed3923e02ec63c70685a04cee4d7813f6e9219 | examples/bluemix/mqtt_bluemix_test/mqtt_bluemix_test.ino | examples/bluemix/mqtt_bluemix_test/mqtt_bluemix_test.ino | // #define DEBUG_MODE
// #define DEBUG_LEVEL_VERBOSE
#include <ESP8266WiFi.h>
#include <ArduinoJson.h>
#include <MqttWrapper.h>
#include <PubSubClient.h>
#include <WiFiHelper.h>
#include "mqtt_configuration.h"
const char* ssid = "CMMC.32";
const char* pass = "guestnetwork";
MqttWrapper *mqtt;
WiFiHelper *wi... | // #define DEBUG_MODE
// #define DEBUG_LEVEL_VERBOSE
#include <ESP8266WiFi.h>
#include <ArduinoJson.h>
#include <MqttWrapper.h>
#include <PubSubClient.h>
#include <WiFiHelper.h>
#include "mqtt_configuration.h"
const char* ssid = "CMMC.47";
const char* pass = "guestnetwork";
MqttWrapper *mqtt;
WiFiHelper *wi... | Add start text. | Add start text.
| Arduino | mit | cmmakerclub/MQTT-Connector,cmmakerclub/MQTT-Connector,cmmakerclub/CMMC_Connector,cmmakerclub/MQTT-Connector,cmmakerclub/CMMC_Connector,cmmakerclub/MQTT-Connector |
f1d8ff0dabda0366a1cdf825ba16a5f0fad4b1ff | PulseSensorAmped_Arduino_1dot4/Timer_Interrupt_Notes.ino | PulseSensorAmped_Arduino_1dot4/Timer_Interrupt_Notes.ino | /*
These notes put together by Joel Murphy for Pulse Sensor Amped, 2015
The code that this section is attached to uses a timer interrupt
to sample the Pulse Sensor with consistent and regular timing.
The code is setup to read Pulse Sensor signal at 500Hz (every 2mS).
The reasoning for this can be found here:... | /*
These notes put together by Joel Murphy for Pulse Sensor Amped, 2015
The code that this section is attached to uses a timer interrupt
to sample the Pulse Sensor with consistent and regular timing.
The code is setup to read Pulse Sensor signal at 500Hz (every 2mS).
The reasoning for this can be found here:... | Update Timer_Interrupt_Notes.ino | Update Timer_Interrupt_Notes.ino | Arduino | mit | WorldFamousElectronics/PulseSensor_Amped_Arduino |
9dc8212dead9193222de49aa12dfdf0ef8b78f9f | examples/IoT/ThingSpeak/CosaThingSpeakTalkBack/CosaThingSpeakTalkBack.ino | examples/IoT/ThingSpeak/CosaThingSpeakTalkBack/CosaThingSpeakTalkBack.ino | /**
* @file CosaThingSpeakTalkBack.ino
* @version 1.0
*
* @section License
* Copyright (C) 2014, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version ... | /**
* @file CosaThingSpeakTalkBack.ino
* @version 1.0
*
* @section License
* Copyright (C) 2014, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version ... | Fix ThingSpeak TalkBack sketch for Arduino Mega. | Fix ThingSpeak TalkBack sketch for Arduino Mega.
1. PING is a reserved symbol.
| Arduino | lgpl-2.1 | dansut/Cosa,dansut/Cosa,rrobinet/Cosa,kc9jud/Cosa,mikaelpatel/Cosa,kc9jud/Cosa,jeditekunum/Cosa,jeditekunum/Cosa,mikaelpatel/Cosa,rrobinet/Cosa,kc9jud/Cosa,kc9jud/Cosa,dansut/Cosa,rrobinet/Cosa,rrobinet/Cosa,jeditekunum/Cosa,mikaelpatel/Cosa,jeditekunum/Cosa,mikaelpatel/Cosa,dansut/Cosa |
65c3717d9a6f262a66ebbcb79c47ffd1ebebcb0a | examples/LLShitFullTest/LLShitFullTest.ino | examples/LLShitFullTest/LLShitFullTest.ino | #include "Arduino.h"
#include <SD.h>
#include <SPI.h>
#include <Ethernet.h>
#include <SpawwnCore.h>
#include <SpawwnStd.h>
#include <SpawwnNet.h>
#include <LLShitCore.h>
#include <LLShitFull.h>
namespace TESTMETRICS {
enum{
START_IDLE,
BASE_LOGGER_BEGIN,
BASE_LOGGER_INSTANCE_MADE,
FULL_LOGGER_BEGIN,
... | #include "Arduino.h"
#include <SD.h>
#include <SPI.h>
#include <Ethernet.h>
#include <SpawwnCore.h>
#include <SpawwnStd.h>
#include <SpawwnNet.h>
#include <LLShitCore.h>
#include <LLShitFull.h>
#define SDCARD_PIN 4
#define SDCARD_SUPPORT_PIN 10
namespace TESTMETRICS {
enum{
START_IDLE,
BASE_LOGGER_BEGIN,
... | Update Test | Update Test
| Arduino | mit | soundspawn/LLShit |
f21a2ba925650a2ce90352caa783bc0e95d5e3fe | examples/serial/serial.ino | examples/serial/serial.ino | // Copyright (c) Sandeep Mistry. All rights reserved.
// Licensed under the MIT license. See LICENSE file in the project root for full license information.
/*
* Serial Port over BLE
* Create UART service compatible with Nordic's *nRF Toolbox* and Adafruit's *Bluefruit LE* iOS/Android apps.
*
* BLESerial class impl... | // Copyright (c) Sandeep Mistry. All rights reserved.
// Licensed under the MIT license. See LICENSE file in the project root for full license information.
/*
* Serial Port over BLE
* Create UART service compatible with Nordic's *nRF Toolbox* and Adafruit's *Bluefruit LE* iOS/Android apps.
*
* BLESerial class impl... | Correct BLE serial example (#140) | Correct BLE serial example (#140)
| Arduino | mit | sandeepmistry/arduino-BLEPeripheral,sandeepmistry/arduino-BLEPeripheral,sandeepmistry/arduino-BLEPeripheral |
d5dcab068179b5e077a158e6fbb8532d9dce418f | examples/_2000_ESPert_workshop/_2000_ESPert_workshop.ino | examples/_2000_ESPert_workshop/_2000_ESPert_workshop.ino | // #include <Arduino.h>
#include <ESPert.h>
ESPert espert;
const char* mqtt_server = "mqtt.espert.io";
unsigned long loopTime = 0;
int currentSwitch = true;
String outTopic = "ESPert/" + String(espert.info.getChipId()) + "/Status";
String inTopic = "ESPert/" + String(espert.info.getChipId()) + "/Command";
int cur... | // #include <Arduino.h>
#include <ESPert.h>
ESPert espert;
const char* mqtt_server = "mqtt.espert.io";
unsigned long loopTime = 0;
int currentSwitch = true;
String outTopic = "ESPert/" + String(espert.info.getChipId()) + "/Status";
String inTopic = "ESPert/" + String(espert.info.getChipId()) + "/Command";
int cur... | Update _2000_ESPert_workshop.ino | Update _2000_ESPert_workshop.ino
Remove fixed board type in workshop example. | Arduino | mit | JimmySoftware/ESPert,JimmySoftware/ESPert,JimmySoftware/ESPert |
06ec5a799d4fbd972376f4aa0f17ddd36d1c7346 | examples/MMA8451demo/MMA8451demo.ino | examples/MMA8451demo/MMA8451demo.ino | /**************************************************************************/
/*!
@file Adafruit_MMA8451.h
@author K. Townsend (Adafruit Industries)
@license BSD (see license.txt)
This is an example for the Adafruit MMA8451 Accel breakout board
----> https://www.adafruit.com/products/2019
... | /**************************************************************************/
/*!
@file Adafruit_MMA8451.h
@author K. Townsend (Adafruit Industries)
@license BSD (see license.txt)
This is an example for the Adafruit MMA8451 Accel breakout board
----> https://www.adafruit.com/products/2019
... | remove unneeded register, change to 2g range default | remove unneeded register, change to 2g range default
| Arduino | bsd-3-clause | leethomason/Adafruit_MMA8451_Library |
5c3b8bf545a79cd54ea1f8dfaad5d1abfa8bf70a | examples/SimpleCycle/SimpleCycle.ino | examples/SimpleCycle/SimpleCycle.ino |
/*
* Example of using the ChainableRGB library for controlling a Grove RGB.
* This code puts a red dot (led) moving along a strip of blue dots.
*/
#include <ChainableLED.h>
#define NUM_LEDS 5
ChainableLED leds(7, 8, NUM_LEDS);
void setup()
{
}
byte pos = 0;
void loop()
{
for (byte i=0; i<NUM_LEDS; i++)
... |
/*
* Example of using the ChainableRGB library for controlling a Grove RGB.
* This code puts a red dot (led) moving along a strip of blue dots.
*/
#include <ChainableLED.h>
#define NUM_LEDS 5
ChainableLED leds(7, 8, NUM_LEDS);
void setup()
{
leds.init();
}
byte pos = 0;
void loop()
{
for (byte i=0; i<NU... | Create init function | Create init function | Arduino | mit | pjpmarques/ChainableLED |
aae1cb805596ef72d9206b4c24828b7ba70cec77 | microcontrollers/arduino-esp32/lora32-morse-beacon/lora32-morse-beacon.ino | microcontrollers/arduino-esp32/lora32-morse-beacon/lora32-morse-beacon.ino | #include <SPI.h>
#include <LoRa.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include "Fixed8x16.h"
#include "Adafruit_SSD1306.h"
//
// Board pins.
//
#if 0
#define LED 23 // IO23 -- LED for TTGO Lora32 board
#else
#define LED 25 // IO25 -- LED for Heltec Lora32 board
#endif
//
// LoRa pins.
//
#d... | /*
* Morse CW beacon for LoRa ESP32 board with OLED display.
*
* Copyright (c) 2018 Serge Vakulenko
*
* Permission to use, copy, modify, and/or distribute this
* software for any purpose with or without fee is hereby granted,
* provided that the above copyright notice and this permission
* notice appear in all ... | Add copyright. | Add copyright.
| Arduino | apache-2.0 | sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-opensource,sergev/vak-o... |
07d9790fb9c99c2075c5fd2d48bad18ab678c0fd | examples/FirebaseNeoPixel_ESP8266/FirebaseNeoPixel_ESP8266.ino | examples/FirebaseNeoPixel_ESP8266/FirebaseNeoPixel_ESP8266.ino | //
// Copyright 2016 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to ... | //
// Copyright 2016 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to ... | fix begin call and rebase | examples/FirebaseNeoPixel: fix begin call and rebase
| Arduino | apache-2.0 | aliafshar/firebase-arduino,gguuss/firebase-arduino,aliafshar/firebase-arduino,FirebaseExtended/firebase-arduino,gguuss/firebase-arduino,FirebaseExtended/firebase-arduino,aliafshar/firebase-arduino,gguuss/firebase-arduino,FirebaseExtended/firebase-arduino |
9a8de73d58bb6c369d69240c5a8a3e9188eaa116 | playground/Led4Digit7Segment/SingleShift/SingleShift.ino | playground/Led4Digit7Segment/SingleShift/SingleShift.ino | /*
SingleShift
Drive a 4-Digit 7-Segment display with a 74HC595 shift register and 4 NPN BJTs.
For info and circuit diagrams see https://github.com/tardate/LittleArduinoProjects/tree/master/playground/Led4Digit7Segment/SingleShift
*/
// use timer for scheduling the display update
#include <FlexiTimer2.h>
//... | /*
SingleShift
Drive a 4-Digit 7-Segment display with a 74HC595 shift register and 4 NPN BJTs.
For info and circuit diagrams see https://github.com/tardate/LittleArduinoProjects/tree/master/playground/Led4Digit7Segment/SingleShift
*/
// use timer for scheduling the display update
#include <FlexiTimer2.h>
//... | refactor code to take numeric processing out of the ISR | [4Digit7Segment/SingleShift] refactor code to take numeric processing out of the ISR | Arduino | mit | tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects,tardate/LittleArduinoProjects |
de5dbf199b9cf4cedd7fe227f64934a3b4f60d62 | home/moz4r/mouthcontrol_hardware.ino | home/moz4r/mouthcontrol_hardware.ino |
// HARDWARE MOUTHCONTROL
//
// dedicated arduino
// Read voltage value from speaker and move jaw
// First POC version, need to be calibrated and fixed :
// If you want test it please read Analog values when you have NO SOUND and enter MIN , min is the value when robot speak
// I use AREF 1 volt and sound come from una... |
// HARDWARE MOUTHCONTROL
//
// dedicated arduino
// Read voltage value from speaker and move jaw
// First POC version, need to be calibrated and fixed :
// If you want test it please read Analog values when you have NO SOUND and enter MIN , min is the value when robot speak
// I use AREF 1 volt and sound come from una... | Update mouthcontrol_hardware.ino (#40) | Update mouthcontrol_hardware.ino (#40) | Arduino | apache-2.0 | MyRobotLab/pyrobotlab,MyRobotLab/pyrobotlab,MyRobotLab/pyrobotlab,MyRobotLab/pyrobotlab,MyRobotLab/pyrobotlab |
7b2c3c10d0449c5dfaac9dc0e46fdf984b54e22a | examples/_Stepper/TestStepRampCom/TestStepRampCom.ino | examples/_Stepper/TestStepRampCom/TestStepRampCom.ino | // Testsketch für Stepper-Rampe mit automatischer Befehlsfolge
// Steuerung der Stepper-Methoden per serieller Schnittstelle und per Abfolgen im EEPROM
/* Steuerung der Methodenaufrufe per serieller Schnittstelle
* dst nnn -> doSteps( +/-nnnL )
* wra nnn -> write( +/-angleL )
* wrs nnn -> writeSteps ... | // Testsketch für Stepper-Rampe mit automatischer Befehlsfolge
// Steuerung der Stepper-Methoden per serieller Schnittstelle und per Abfolgen im EEPROM
/* Steuerung der Methodenaufrufe per serieller Schnittstelle
* dst nnn -> doSteps( +/-nnnL )
* wra nnn -> write( +/-angleL )
* wrs nnn -> writeSteps ... | Update TestStepRampCom.ino | Update TestStepRampCom.ino
| Arduino | lgpl-2.1 | MicroBahner/MobaTools,MicroBahner/MobaTools |
0762590721d720c4609dd3ea451f088987572282 | arduino-neopixel.ino | arduino-neopixel.ino | #include <Adafruit_NeoPixel.h>
// Arduino Nano v2.x, v3.x
#define TOTAL_PIXELS 99
// common settings :::::::::
#define MAX_VAL 64 // 0 to 255 for brightness 多くのLEDを制御した場合に、色が安定しない問題を解決するために設けた制限
#define DELAY_TIME 10
// Parameter 1 = number of pixels in strip
// Parameter 2 = pin number (most are valid)
// Paramete... | #include <Adafruit_NeoPixel.h>
// Arduino Nano v2.x, v3.x
#define TOTAL_PIXELS 99
// common settings :::::::::
#define MAX_VAL 64 // 0 to 255 for brightness 多くのLEDを制御した場合に、色が安定しない問題を解決するために設けた制限
#define DELAY_TIME 10
// Parameter 1 = number of pixels in strip
// Parameter 2 = pin number (most are valid)
// Paramete... | divide circle by instrument color and effect color | divide circle by instrument color and effect color
| Arduino | mit | karappo/ptw-wheel |
efa24088edd4ea9f71e64db413d5fd2d9b1e2cff | arduinoApp/gardenSketch/gardenSketch.ino | arduinoApp/gardenSketch/gardenSketch.ino | /*
Arduino based self regulating kitchen garden
*/
#include <DHT.h>
#include <Sensirion.h>
// soil related setup
#define dataPin 3
#define clockPin 4
Sensirion soilSensor = Sensirion(dataPin, clockPin);
float soilTemperature;
float soilMoisture;
float dewpoint;
// air temperature related setup
#define DHTPIN 2 ... | /*
Arduino based self regulating kitchen garden
*/
#include <DHT.h>
#include <Sensirion.h>
// soil related setup
#define dataPin 3
#define clockPin 4
Sensirion soilSensor = Sensirion(dataPin, clockPin);
float soilTemperature;
float soilMoisture;
float dewpoint;
// air temperature related setup
#define DHTPIN 2 ... | Add relay control for first relay | Add relay control for first relay
This is the one driving the fan
| Arduino | apache-2.0 | eikooc/KitchenGarden,eikooc/KitchenGarden,eikooc/KitchenGarden,eikooc/KitchenGarden |
77185f0152d132ddaf11e2d76a097dfb3226e147 | particle/evcharging.ino | particle/evcharging.ino | // ----------------------------------------------------------
// Firmware for Particle Electron connected to EV charger
// ----------------------------------------------------------
int button = D6;
char PIN[8] = {B3, B2, B1, B0, D3, D2, D1, D0};
int carRead[8];
double channelMaxCharge[8];
int channelSupplyCharge[8];
... | // ----------------------------------------------------------
// Firmware for Particle Electron connected to EV charger
// ----------------------------------------------------------
int button = D6;
char PIN[8] = {B3, B2, B1, B0, D3, D2, D1, D0};
int carRead[8];
double previousCharge[8] = {0, 0, 0, 0, 0, 0, 0, 0};
dou... | Update evcharging.ino | Update evcharging.ino | Arduino | mit | anamklone/ENGR1050,anamklone/ENGR1050,anamklone/ENGR1050 |
3bd1ea93f1b0f01a0174b6e642cc06387fb20d2b | PlantSensor/PlantSensor.ino | PlantSensor/PlantSensor.ino | // Copyright the project authors as listed in the AUTHORS file.
// All rights reserved. Use of this source code is governed by the
// license that can be found in the LICENSE file.
#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <WiFiClientSecure.h>
#include <PubSubClient.h>
#include <Wire.h>
#include <Sodaq_SH... | // Copyright the project authors as listed in the AUTHORS file.
// All rights reserved. Use of this source code is governed by the
// license that can be found in the LICENSE file.
#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <WiFiClientSecure.h>
#include <PubSubClient.h>
#include <Wire.h>
#include <Sodaq_SH... | add metrics end point | src: add metrics end point
| Arduino | mit | mhdawson/arduino-esp8266,mhdawson/arduino-esp8266 |
260a1cf250c1080f3f51e009e7c6b073e194fcb3 | led_pixels/led_pixels.ino | led_pixels/led_pixels.ino |
#include "SPI.h"
#include "Adafruit_WS2801.h"
#include "frames.h"
#include "LEDFader.h"
/**
Designed to work with the Adafruit RGB Pixels.
12mm Bullet shape ----> https://www.adafruit.com/products/322
12mm Flat shape ----> https://www.adafruit.com/products/738
36mm Square shape ----> https://www.adafruit.... |
#include "SPI.h"
#include "Adafruit_WS2801.h"
#include "frames.h"
#include "LEDFader.h"
/**
Designed to work with the Adafruit RGB Pixels.
12mm Bullet shape ----> https://www.adafruit.com/products/322
12mm Flat shape ----> https://www.adafruit.com/products/738
36mm Square shape ----> https://www.adafruit.... | Add different fade outs | Add different fade outs
| Arduino | unlicense | gperks/Valentine-Arduino,gperks/Valentine-Arduino |
5ac11042f68cad46fd84cff8c22c742f2d1f8d58 | m_led/m_led.ino | m_led/m_led.ino | #include "LedStripRS.h"
LedStripRS<A0> trs;
static BaseLedStripRS* strips[]=
{
&trs
};
static const int num_strips=sizeof(strips)/sizeof(strips[0]);
void send_color_all(uint32_t color)
{
for(int i=0;i<num_strips;i++)
{
strips[i]->send_color(color);
}
}
#define RAINBOW_SLOWNESS 25
PROGMEM static const uint3... | #include "LedStripRS.h"
LedStripRS<A0,15> trs;
static BaseLedStripRS* strips[]=
{
&trs
};
static const int num_strips=sizeof(strips)/sizeof(strips[0]);
void send_color_all(uint32_t color)
{
for(int i=0;i<num_strips;i++)
{
strips[i]->send_color(color);
}
}
#define RAINBOW_SLOWNESS 25
PROGMEM static const ui... | add 15 | add 15
| Arduino | mit | Steve132/rs_led |
2aa1b0dfd19dc9b28251f63af5ca9acfb1081875 | examples/FirebasePush_ESP8266/FirebasePush_ESP8266.ino | examples/FirebasePush_ESP8266/FirebasePush_ESP8266.ino | //
// Copyright 2015 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to ... | //
// Copyright 2015 Google Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to ... | add comment | add comment
| Arduino | apache-2.0 | FirebaseExtended/firebase-arduino,ed7coyne/firebase-arduino,aliafshar/firebase-arduino,proppy/firebase-arduino,FirebaseExtended/firebase-arduino,aliafshar/firebase-arduino,gguuss/firebase-arduino,gguuss/firebase-arduino,FirebaseExtended/firebase-arduino,aliafshar/firebase-arduino,gguuss/firebase-arduino |
eeec869ba930f6f722606a7f47635852b8dcab11 | examples/ArduinoUnoNano-basic/ArduinoUnoNano-basic.ino | examples/ArduinoUnoNano-basic/ArduinoUnoNano-basic.ino | /*
* Author: JP Meijers
* Date: 2016-02-07
* Previous filename: TTN-Mapper-TTNEnschede-V1
*
* This program is meant to be used with an Arduino UNO or NANO, conencted to an RNxx3 radio module.
* It will most likely also work on other compatible Arduino or Arduino compatible boards, like The Things Uno, but might ... | /*
* Author: JP Meijers
* Date: 2016-02-07
* Previous filename: TTN-Mapper-TTNEnschede-V1
*
* This program is meant to be used with an Arduino UNO or NANO, conencted to an RNxx3 radio module.
* It will most likely also work on other compatible Arduino or Arduino compatible boards, like The Things Uno, but might ... | Clear serial after module init and added comm test. | Clear serial after module init and added comm test.
| Arduino | apache-2.0 | jpmeijers/RN2483-Arduino-Library |
bbe03e13ff530db00503f2f121c5948bc1b60cf0 | examples/02-Utility/StereoAudioToSD_Fast/StereoAudioToSD_Fast.ino | examples/02-Utility/StereoAudioToSD_Fast/StereoAudioToSD_Fast.ino | /*
* StereoAudioToSD
*
* Digitizes two channels and records to SD card.
*
* >>> START recording by having potentiometer turned above half-way
* >>> STOP recording by having potentiometer turned below half-way
*
* Assumes use of Teensy 3.6 and Tympan Rev A or C
*
* Uses super-fast SD library that is ... | /*
* StereoAudioToSD
*
* Digitizes two channels and records to SD card.
*
* >>> START recording by having potentiometer turned above half-way
* >>> STOP recording by having potentiometer turned below half-way
*
* Assumes Tympan Rev C or D. Program in Arduino IDE as a Teensy 3.6.
*
* Uses super-fast... | update SD write with autoMic and RevC/D | Examples: update SD write with autoMic and RevC/D
| Arduino | mit | Tympan/Tympan_Library,Tympan/Tympan_Library,Tympan/Tympan_Library |
b3ba9c75462340e0ba3fcd59f4f06675827e1483 | build/shared/examples/07.Sensors/ADXL3xx/ADXL3xx.ino | build/shared/examples/07.Sensors/ADXL3xx/ADXL3xx.ino |
/*
ADXL3xx
Reads an Analog Devices ADXL3xx accelerometer and communicates the
acceleration to the computer. The pins used are designed to be easily
compatible with the breakout boards from Sparkfun, available from:
http://www.sparkfun.com/commerce/categories.php?c=80
http://www.arduino.cc/en/Tutoria... |
/*
ADXL3xx
Reads an Analog Devices ADXL3xx accelerometer and communicates the
acceleration to the computer. The pins used are designed to be easily
compatible with the breakout boards from Sparkfun, available from:
http://www.sparkfun.com/commerce/categories.php?c=80
http://www.arduino.cc/en/Tutoria... | Replace A2 with A0 ADXL3xx.ino to support all platforms | Replace A2 with A0 ADXL3xx.ino to support all platforms
| Arduino | lgpl-2.1 | battosai30/Energia,battosai30/Energia,croberts15/Energia,vigneshmanix/Energia,battosai30/Energia,vigneshmanix/Energia,vigneshmanix/Energia,battosai30/Energia,croberts15/Energia,croberts15/Energia,croberts15/Energia,croberts15/Energia,croberts15/Energia,vigneshmanix/Energia,vigneshmanix/Energia,vigneshmanix/Energia,batt... |
e180b7037dcf303fb3ff27dc60fadcee5d7f3a09 | build/shared/examples/04.Communication/SerialEvent/SerialEvent.ino | build/shared/examples/04.Communication/SerialEvent/SerialEvent.ino | /*
Serial Event example
When new serial data arrives, this sketch adds it to a String.
When a newline is received, the loop prints the string and
clears it.
A good test for this is to try it with a GPS receiver
that sends out NMEA 0183 sentences.
Created 9 May 2011
by Tom Igoe
This example code is in the ... | /*
Serial Event example
When new serial data arrives, this sketch adds it to a String.
When a newline is received, the loop prints the string and
clears it.
A good test for this is to try it with a GPS receiver
that sends out NMEA 0183 sentences.
NOTE: The serialEvent() feature is not available on the
Leona... | Add a note about ATmega32U4 incompatibility to SerialEvent example | Add a note about ATmega32U4 incompatibility to SerialEvent example
serialEvent() does not work on the ATmega32U4 boards.
Reference: https://github.com/arduino/Arduino/issues/1031 | Arduino | lgpl-2.1 | me-no-dev/Arduino-1,me-no-dev/Arduino-1,stickbreaker/Arduino,stickbreaker/Arduino,stickbreaker/Arduino,majenkotech/Arduino,me-no-dev/Arduino-1,majenkotech/Arduino,majenkotech/Arduino,stickbreaker/Arduino,stickbreaker/Arduino,me-no-dev/Arduino-1,me-no-dev/Arduino-1,majenkotech/Arduino,me-no-dev/Arduino-1,majenkotech/Ard... |
df418d07acce017352e9c64cbbb8d47bb8fb8b62 | sketches/foobar/foobar.ino | sketches/foobar/foobar.ino | int BAUD = 9600;
char MESSAGE[] = "{\"foo\":0,\"bar\":1}";
void setup() {
Serial.begin(BAUD);
}
void loop() {
if (Serial.available() > 0) {
Serial.read();
Serial.println(MESSAGE);
}
}
| int BAUD = 9600;
char MESSAGE[] = "{\"foo\":0,\"bar\":1}";
void setup() {
Serial.begin(BAUD);
pinMode(13, OUTPUT);
}
void loop() {
digitalWrite(13, HIGH);
if (Serial.available() > 0) {
Serial.read();
Serial.println(MESSAGE);
}
digitalWrite(13, LOW);
}
| write LED | write LED
| Arduino | mit | trevstanhope/arduino.rs |
5b4c3d6b274eebf4335cbf877f9d23fd64a31519 | Firmware/IMU.ino | Firmware/IMU.ino | MPU6050 mpu;
uint8_t mpuIntStatus;
uint16_t packetSize;
uint16_t fifoCount;
uint8_t fifoBuffer[64];
Quaternion q;
VectorFloat gravity;
float ypr[3];
void mpu_initialisation() {
Wire.begin();
TWBR = 24;
mpu.initialize();
mpu.dmpInitialize();
mpu.setXAccelOffset(-1343);
mpu.setYAccelOffset(-1155);
mpu.s... | MPU6050 mpu;
uint8_t mpuIntStatus;
uint16_t packetSize;
uint16_t fifoCount;
uint8_t fifoBuffer[64];
Quaternion q;
VectorFloat gravity;
float ypr[3];
void mpu_initialisation() {
Wire.begin();
TWBR = 24;
mpu.initialize();
mpu.dmpInitialize();
mpu.setXAccelOffset(-1343);
mpu.setYAccelOffset(-... | Update IMU.ino | Update IMU.ino | Arduino | mit | bybel/R2-Quadcopter |
34757967870b562492309e2714aa94a92ce033a9 | Seeed_QTouch/examples/getTouchNumber/getTouchNumber.ino | Seeed_QTouch/examples/getTouchNumber/getTouchNumber.ino | // demo of Qtouch - getTouchNumber
// this demo will use touchNum function
// this function can return the touched state of the device
// when there's no touched, return -1
// or return the touch number
#include <Wire.h>
#include "Seeed_QTouch.h"
void setup()
{
Serial.begin(9600);
}
void loop()
{
int tn = Q... | // demo of Qtouch - getTouchNumber
// this demo will use touchNum function
// this function can return the touched state of the device
// when there's no touched, return -1
// or return the touch number
#include <Wire.h>
#include "Seeed_QTouch.h"
void setup()
{
Wire.begin();
Serial.begin(9600);
}
void loop(... | Update getTouchNumber.ino | Update getTouchNumber.ino | Arduino | mit | kingsongchen/Xadow_Edison_Demos,Seeed-Studio/Xadow_Edison_Demos,Seeed-Studio/Xadow_Edison_Demos,kingsongchen/Xadow_Edison_Demos |
05e143b78893a50381b0a58d42d64cf5ef49a00d | examples/2.Digital/InterruptOnChange_430/InterruptOnChange_430.ino | examples/2.Digital/InterruptOnChange_430/InterruptOnChange_430.ino | //
// InterruptOnChange_430
//
// © Robert Wessels 2013
//
// The MSP430 GPIOs intterupt system can be configured to detect a FALLING or RISING edge.
// It however can not be configured to detect both of them at the same time, also called CHANGE in Arduino.
// This Sketch demonstrates how to "emulate" this by flip... | //
// InterruptOnChange_430
//
// © Robert Wessels 2013
//
// The MSP430 GPIOs intterupt system can be configured to detect a FALLING or RISING edge.
// It however can not be configured to detect both of them at the same time, also called CHANGE in Arduino.
// This Sketch demonstrates how to "emulate" this by flip... | Fix for #234 | Fix for #234
Fix for #234 | Arduino | lgpl-2.1 | dvdvideo1234/Energia,radiolok/Energia,sanyaade-iot/Energia,dvdvideo1234/Energia,radiolok/Energia,DavidUser/Energia,bobintornado/Energia,NoPinky/Energia,martianmartin/Energia,NoPinky/Energia,vigneshmanix/Energia,cevatbostancioglu/Energia,danielohh/Energia,bobintornado/Energia,bobintornado/Energia,battosai30/Energia,qton... |
1ea214d2c7a2398fcb2e6e678e9ba625afa70e20 | FastLED/Receive_test.ino | FastLED/Receive_test.ino | // This #include statement was automatically added by the Particle IDE.
#include <FastLED.h>
FASTLED_USING_NAMESPACE;
int receivedHue = 0;
int receivedSaturation = 0;
int receivedValue = 0;
String receivedID;
CHSV baseColor;
void setup() {
Particle.subscribe("Beacon Update", ColorUpdate, MY_DEVICES);
}
void loo... | // This #include statement was automatically added by the Particle IDE.
#include <FastLED.h>
FASTLED_USING_NAMESPACE;
int receivedHue = 0;
int receivedSaturation = 0;
int receivedValue = 0;
int baseLightsLit = 0; //This value is the number of light lit in the base
CHSV baseColor;
String selfName = "Bonnie"; //The n... | Update Receive_test.ino | Update Receive_test.ino | Arduino | apache-2.0 | Blaze420McYoloSwag/LiteHaus |
2d9928dd93346cf933286d715517ea7ff9e3d411 | dragino/dragino_lcd20x4.ino | dragino/dragino_lcd20x4.ino | #Este sketch adquiere datos de temperatura y humedad desde un sensor DHT22 o DHT11 por el pin A0 y datos de
#temperatura desde un sensor DS18B20 conectado al pin A1 de un Dragino V2 MS14-S con M32 IoT Module
#estos datos son publicados a un broker MQTT al topico test/temp
#el display LCD 20*4 Characters - White back ut... | #Este sketch adquiere datos de temperatura y humedad desde un sensor DHT22 o DHT11 por el pin A0 y datos de
#temperatura desde un sensor DS18B20 conectado al pin A1 de un Dragino V2 MS14-S con M32 IoT Module
#estos datos son publicados a un broker MQTT al topico test/temp
#el display LCD 20*4 Characters - White back ut... | Update dragino_lcd20x4.ino | Update dragino_lcd20x4.ino | Arduino | mit | pumanzor/iot-redlibre,pumanzor/iot-redlibre |
1902bc2b9771e09dd2c933ee8dbf548513390f57 | rc_steer_servo_controller/rc_steer_servo_controller.ino | rc_steer_servo_controller/rc_steer_servo_controller.ino | #include "rc_steer_servo_controller.h"
/* Subscriber and Publisher declarations*/
ros::Subscriber<std_msgs::Float64>
frontSteerServoCommandSubscriber("/front_steer_controller/command", frontSteerServoCommandCallback);
ros::Subscriber<std_msgs::Float64>
rearSteerServoCommandSubscriber("/rear_steer_controller/comma... | #include "rc_steer_servo_controller.h"
/* Subscriber and Publisher declarations*/
ros::Subscriber<std_msgs::Float64>
frontSteerServoCommandSubscriber("/front_steer_controller/command", frontSteerServoCommandCallback);
ros::Subscriber<std_msgs::Float64>
rearSteerServoCommandSubscriber("/rear_steer_controller/comma... | Delete trailing whitespaces | Delete trailing whitespaces
| Arduino | bsd-3-clause | gKouros/my_arduino_sketches,gKouros/my_arduino_sketches,gKouros/my_arduino_sketches |
05763bf42bc1c684e02bc48f02ab0c9a8c5c232e | blink_strip/blink_strip.ino | blink_strip/blink_strip.ino | static int LED_COUNT = 32;
void setup()
{
DDRB = 0xFF;
DDRD = 0xFF;
}
//// For teensy prototypes
//void send_single_byte(uint8_t c)
//{
// // D5 is clock, D4 is data
// for(uint8_t i = 0; i < 8; i++) {
// PORTD = (((c >> (7 - i)) & 0x01) << 4);
// PORTD = (((c >> (7 - i)) & 0x01) << 4) | 0x20;
// }
//}
... | static int LED_COUNT = 32;
void setup()
{
Serial.begin(115200);
DDRB = 0xFF;
DDRD = 0xFF;
}
//// For teensy prototypes
//void send_single_byte(uint8_t c)
//{
// // D5 is clock, D4 is data
// for(uint8_t i = 0; i < 8; i++) {
// PORTD = (((c >> (7 - i)) & 0x01) << 4);
// PORTD = (((c >> (7 - i)) & 0x01... | Add serial override mode to example sketch | Add serial override mode to example sketch
| Arduino | apache-2.0 | Blinkinlabs/BlinkyTape,Blinkinlabs/BlinkyTape,Blinkinlabs/BlinkyTape |
292465c1065e5ac9c47026519f653b77601bf850 | stairs/main.ino | stairs/main.ino | // Use the FastLED library.
#include <FastLED.h>
// Serial DEBUG mode on/off
#undef DEBUG_POTS
// Analog input pins.
//
// .-------.
// | O O |
// | O O O |
// '-------'
//
// The device has five potentiometer inputs. The top left is a switch with 10
// different values, while the other four have a variable input b... | // Use the FastLED library.
#include <FastLED.h>
// Serial DEBUG mode on/off
#undef DEBUG_POTS
// Analog input pins.
//
// .-------.
// | O O |
// | O O O |
// '-------'
//
// The device has five potentiometer inputs. The top left is a switch with 10
// different values, while the other four have a variable input b... | Implement rainbow train and reorder modes | Implement rainbow train and reorder modes
| Arduino | mit | ambientsound/wirelight,ambientsound/wirelight,ambientsound/wirelight,ambientsound/wirelight,ambientsound/wirelight |
3c856d876285a863c4830232c42b93c90fa9c982 | arduino/src/rs485_master/rs485_master.ino | arduino/src/rs485_master/rs485_master.ino | #include "RS485_protocol.h"
const byte ENABLE_PIN = 4;
const byte LED_PIN = 13;
int counter = 0;
// callback routines
void fWrite (const byte content)
{
Serial1.write (content);
}
int fAvailable ()
{
return Serial1.available ();
}
int fRead ()
{
return Serial1.read ();
}
... | #include "RS485_protocol.h"
const byte ENABLE_PIN = 4;
const byte LED_PIN = 13;
int counter = 0;
// callback routines
void fWrite (const byte content)
{
Serial1.write (content);
}
int fAvailable ()
{
return Serial1.available ();
}
int fRead ()
{
return Serial1.read ();
}
... | fix master | fix master
| Arduino | mit | benninge/wearable_suit,benninge/wearable_suit,benninge/wearable_suit |
2729d38cd95d2235e8caa8819439450056c57a62 | libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino | libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino | /*
Digital Pot Control
This example controls an Analog Devices AD5206 digital potentiometer.
The AD5206 has 6 potentiometer channels. Each channel's pins are labeled
A - connect this to voltage
W - this is the pot's wiper, which changes when you set it
B - connect this to ground.
The AD5206 is SPI-compat... | /*
Digital Pot Control
This example controls an Analog Devices AD5206 digital potentiometer.
The AD5206 has 6 potentiometer channels. Each channel's pins are labeled
A - connect this to voltage
W - this is the pot's wiper, which changes when you set it
B - connect this to ground.
The AD5206 is SPI-compat... | Add necessary delays to SPI DigitalPotControl example | Add necessary delays to SPI DigitalPotControl example
According to https://github.com/arduino/Arduino/issues/6395, these delays are required for the SPI communication with the digital potentiometer to work.
| Arduino | lgpl-2.1 | 01org/corelibs-arduino101,01org/corelibs-arduino101,01org/corelibs-arduino101 |
819a774d8d2256ad87decb618e27b23b35efd854 | client/client.ino | client/client.ino | #include <SoftwareSerial.h>
#include <IRremote.h>
#include "utils.h"
// Trying to elucidate the way communication works first
// current design enforces a simplest design on the receiver side
// no scheduling, purely acknowledge everything it has received with a random delay
#define IDLE 0
#define PENDING 1
#define CO... | #include <SoftwareSerial.h>
#include <IRremote.h>
#include "utils.h"
// Trying to elucidate the way communication works first
// current design enforces a simplest design on the receiver side
// no scheduling, purely acknowledge everything it has received with a random delay
#define IDLE 0
#define PENDING 1
#define CO... | read device id + implement led logis (status & signal) | read device id + implement led logis (status & signal)
| Arduino | bsd-2-clause | nebgnahz/HOBS,nebgnahz/HOBS,nebgnahz/HOBS |
575ccdf4937b49ececcb779b88599633a380c2a0 | NetworkItArduino/Firmware/networkit_template/networkit_template.ino | NetworkItArduino/Firmware/networkit_template/networkit_template.ino |
#include "libraries/ArduinoJson.h"
#include "libraries/Message.h"
int ledPin = 2;
int buttonPin = 4;
bool pressed = false;
int messageCount = 0;
void setup()
{
networkit_setup(); //please leave here
//Your code here
pinMode(ledPin, OUTPUT);
pinMode(buttonPin, INPUT_PULLUP);
}
void loop()
{
netw... |
#include "libraries/ArduinoJson.h"
#include "libraries/Message.h"
int ledPin = 2;
int buttonPin = 5;
bool pressed = false;
int messageCount = 0;
void setup()
{
networkit_setup(); //please leave here
//Your code here
pinMode(ledPin, OUTPUT);
pinMode(buttonPin, INPUT_PULLUP);
}
void loop()
{
netw... | Fix issue startup issue with button code | Fix issue startup issue with button code
| Arduino | mit | kevinta893/NetworkIt,kevinta893/NetworkIt,kevinta893/NetworkIt,kevinta893/NetworkIt,kevinta893/NetworkIt,kevinta893/NetworkIt,kevinta893/NetworkIt |
36fa5b5845761b035d37505b64056d117a2db4db | ArduinoSensorBoard/ArduinoSensorBoard.ino | ArduinoSensorBoard/ArduinoSensorBoard.ino | #include <SPI.h>
#include "nRF24L01.h"
#include "RF24.h"
#include "DHT.h"
#include "printf.h"
#define DHTPIN 2
#define DHTTYPE DHT11
RF24 radio(8,9);
DHT dht(DHTPIN, DHTTYPE);
byte incomingByte = 0;
const uint64_t pipes[2] = {
0xF0F0F0F001LL, 0xF0F0F0F002LL };
const byte shortAddr = 0x02;
int switchsPins[] = {
... | #include <SPI.h>
#include "nRF24L01.h"
#include "RF24.h"
#include "DHT.h"
#include <EEPROM.h>
//#include "printf.h"
#define DHTPIN 2
#define DHTTYPE DHT11
RF24 radio(8,9);
DHT dht(DHTPIN, DHTTYPE);
byte incomingByte = 0;
const uint64_t pipes[2] = {
0xF0F0F0F001LL, 0xF0F0F0F002LL };
const byte shortAddr = 0x02;... | Add buffering | Add buffering
Use EEPROM as buffer for data
| Arduino | apache-2.0 | Ertinfagor/RCHome,Ertinfagor/RCHome,Ertinfagor/RCHome |
4770de58db4900229d45b8b4e96a0fb966f58ef4 | software/firmware/hardware_test/hardware_test/hardware_test.ino | software/firmware/hardware_test/hardware_test/hardware_test.ino | #include <AccelStepper.h>
// Pin definitions
// Left motor driver
#define motorLPin1 2 // IN1 on the ULN2003 driver 1
#define motorLPin2 3 // IN2 on the ULN2003 driver 1
#define motorLPin3 4 // IN3 on the ULN2003 driver 1
#define motorLPin4 5 // IN4 on the ULN2003 driver 1
// Right motor driver
#... | #include <AccelStepper.h>
// Pin definitions
// Left motor driver
#define motorLPin1 2 // IN1 on the ULN2003 driver 1
#define motorLPin2 3 // IN2 on the ULN2003 driver 1
#define motorLPin3 4 // IN3 on the ULN2003 driver 1
#define motorLPin4 5 // IN4 on the ULN2003 driver 1
// Right motor driver
#... | Update firmware with peripheral support | Update firmware with peripheral support
| Arduino | mit | snhack/LogoBot,snhack/LogoBot,snhack/LogoBot,snhack/LogoBot,snhack/LogoBot |
925d225d0c968df981289f97603a8a23a8437c73 | sketch_smartlock/sketch_smartlock.ino | sketch_smartlock/sketch_smartlock.ino | #include <ArduinoJson.h>
#include <LGPRS.h>
#include <LGPRSClient.h>
#include <LGPS.h>
#include <MQTTClient.h>
#define JSON_BUF_SIZE 192
#define PIN_MOTOR 0
#define PIN_LOCK_STATUS 5
#define PIN_LOCK_STEP 6
#define PIN_BUZZER 7
typedef enum {
STATUS_INVALID,
STATUS_INIT_GPRS,
STATUS_INIT_YUNBA,
STATUS_IDLE,
... | #include <ArduinoJson.h>
#include <LGPRS.h>
#include <LGPRSClient.h>
#include <LGPS.h>
#include <MQTTClient.h>
#define JSON_BUF_SIZE 192
#define PIN_MOTOR 0
#define PIN_LOCK_STATUS 5
#define PIN_LOCK_STEP 6
#define PIN_BUZZER 7
typedef enum {
STATUS_INVALID,
STATUS_INIT_GPRS,
STATUS_INIT_YUNBA,
STATUS_IDLE,
... | fix unlock check | fix unlock check
| Arduino | mit | yunbademo/yunba-smartlock,yunbademo/yunba-smartlock |
e90d47ef4f21031e13a8a8d6248277af0665bab8 | examples/rwccert-otaa-halconfig-us915/rwccert-otaa-halconfig-us915.ino | examples/rwccert-otaa-halconfig-us915/rwccert-otaa-halconfig-us915.ino | /*******************************************************************************
* Copyright (c) 2019 Terry Moore, MCCI
*
* Permission is hereby granted, free of charge, to anyone
* obtaining a copy of this document and accompanying files,
* to do whatever they want with them without any restriction,
* including,... | /*
Module: rwccert-otaa-halconfig.ino
Function:
Test program for developing and checking LMIC compliance test support.
Copyright and License:
Please see accompanying LICENSE file.
Author:
Terry Moore, MCCI Corporation March 2019
*/
#include <Arduino.h>
#include <arduino_lmic.h>
#include <arduino_lm... | Simplify header includes, commentary | Simplify header includes, commentary
| Arduino | mit | mcci-catena/arduino-lmic,mcci-catena/arduino-lmic,mcci-catena/arduino-lmic |
bdb4948508ebe12f842a75f8b11d077e8130be33 | examples/SW01_Humidity_Measurement/SW01_Humidity_Measurement.ino | examples/SW01_Humidity_Measurement/SW01_Humidity_Measurement.ino | /*************************************************************
This is an examples for the SW01
Digital Temperature, Pressure and Humidity Sensor
You can buy one on our store!
-----> https://xinabox.cc/SW01/
This example request a humidity meausrement to be
made by the SW01 and display the data over the Seri... | /*************************************************************
This is an examples for the SW01
Digital Temperature, Pressure and Humidity Sensor
You can buy one on our store!
-----> https://xinabox.cc/SW01/
This example request a humidity meausrement to be
made by the SW01 and display the data over the Seri... | Update SW01_Humidity_Measurement.ino | Update SW01_Humidity_Measurement.ino | Arduino | mit | xinabox/xSW01 |
7d138efc1a4fcab9f1dc4b5dc1b357e40a419fff | examples/adafruitio_secure_esp8266/adafruitio_secure_esp8266.ino | examples/adafruitio_secure_esp8266/adafruitio_secure_esp8266.ino | /***************************************************
Adafruit MQTT Library ESP8266 Adafruit IO SSL/TLS example
Must use the latest version of ESP8266 Arduino from:
https://github.com/esp8266/Arduino
Works great with Adafruit's Huzzah ESP board & Feather
----> https://www.adafruit.com/product/2471
----> ... | /***************************************************
Adafruit MQTT Library ESP8266 Adafruit IO SSL/TLS example
Must use the latest version of ESP8266 Arduino from:
https://github.com/esp8266/Arduino
Works great with Adafruit's Huzzah ESP board & Feather
----> https://www.adafruit.com/product/2471
----> ... | add delay to secure example publish loop | add delay to secure example publish loop
| Arduino | mit | adafruit/Adafruit_MQTT_Library |
ed15e6619f7c2be68209238a4401ee9aa2d1dd3c | build/shared/examples/examples.ino | build/shared/examples/examples.ino | /*
OVERVIEW
Thank you for using the Papilio DesignLab IDE! This is the one place to go for all of your Papilio needs.
Use this system to Draw and Debug circuits for your FPGA without learning VHDL!
Use the included schematic library to draw circuits with basic building blocks such as logic gates, shifters, multiplexe... | /*
OVERVIEW
Thank you for using the Papilio DesignLab IDE! This is the one place to go for all of your Papilio needs.
Use this system to Draw and Debug circuits for your FPGA without learning VHDL!
Use the included schematic library to draw circuits with basic building blocks such as logic gates, shifters, multiplexe... | update TOC | update TOC
| Arduino | lgpl-2.1 | rcook/DesignLab,rcook/DesignLab,rcook/DesignLab,rcook/DesignLab,rcook/DesignLab,rcook/DesignLab,rcook/DesignLab |
3fc42153d3151d41bbf89dcaa197827a6f1dca33 | V1_0.ino | V1_0.ino | #include <avr/io.h>
#include <avr/interrupt.h>
#include <util/crc16.h>
#include <SPI.h>
#include <RFM22.h>
#include <TinyGPS.h>
#define ASCII 7 // ASCII 7 or 8
#define STOPBITS 2 // Either 1 or 2
#define TXDELAY 0 // Delay between sentence TX's
#define RTTY_BAUD 50 // Baud rate for use with R... | #include <avr/io.h>
#include <avr/interrupt.h>
#include <util/crc16.h>
#include <SPI.h>
#include <RFM22.h>
#include <TinyGPS.h>
#define ASCII 7 // ASCII 7 or 8
#define STOPBITS 2 // Either 1 or 2
#define TXDELAY 0 // Delay between sentence TX's
#define RTTY_BAUD 50 ... | Apply "indent -kr -i2 -nut" to format whitespace roughly to the arduino standard | Apply "indent -kr -i2 -nut" to format whitespace roughly to the arduino standard
| Arduino | bsd-2-clause | bertrik/picoballoon |
8bd92ac2f075618175a96119d4c463a5a0dd8d27 | examples/SW01_Temperature_Measurement/SW01_Temperature_Measurement.ino | examples/SW01_Temperature_Measurement/SW01_Temperature_Measurement.ino | /*************************************************************
This is an examples for the SW01
Digital Temperature, Pressure and Humidity Sensor
You can buy one on our store!
-----> https://xinabox.cc/SW01/
This example request a temperature meausrement to be
made by the SW01 and display the data over the S... | /*************************************************************
This is an examples for the SW01
Digital Temperature, Pressure and Humidity Sensor
You can buy one on our store!
-----> https://xinabox.cc/SW01/
This example request a temperature meausrement to be
made by the SW01 and display the data over the S... | Update SW01_Temperature_Measurement.ino | Update SW01_Temperature_Measurement.ino | Arduino | mit | xinabox/xSW01 |
b1695117a1f56c3ac8b3490aba2c81fb3a41bcd4 | battlestation/arduino/arduino.ino | battlestation/arduino/arduino.ino | /*
This file is part of the Siege Battlestation Indicator.
Siege Battlestation Indicator is free software: you can
redistribute it and/or modify it under the terms of the GNU
Lesser General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
... | /*
This file is part of the Siege Battlestation Indicator.
Siege Battlestation Indicator is free software: you can
redistribute it and/or modify it under the terms of the GNU
Lesser General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
... | Use strtok_r like a good human | Use strtok_r like a good human
| Arduino | bsd-2-clause | WalterCReel3/siege,WalterCReel3/siege,WalterCReel3/siege,WalterCReel3/siege |
7fb0e909225bb2d5842fd5f8e178d393f334c948 | app/firmware/entry/entry.ino | app/firmware/entry/entry.ino |
char remainData;
const int M_SIZE=20;
const int M_VALUE=614;
int iii=0;
int mdata[M_SIZE];
void setup(){
Serial.begin(9600);
Serial.flush();
initPorts();
}
void initPorts () {
for (int pinNumber = 0; pinNumber < 14; pinNumber++) {
pinMode(pinNumber, OUTPUT);
digitalWrite(pinNumber, LOW);
}
}
void ... |
char remainData;
const int M_SIZE=20;
const int M_VALUE=614;
int iii=0;
int mdata[M_SIZE];
void setup(){
Serial.begin(9600);
Serial.flush();
initPorts();
}
void initPorts () {
for (int pinNumber = 0; pinNumber < 14; pinNumber++) {
pinMode(pinNumber, OUTPUT);
digitalWrite(pinNumber, LOW);
}
}
void ... | delete isPortWriteable | delete isPortWriteable
| Arduino | mit | songhagwon/entry-hw,kjsii123/entry-hw,SungminSeung/entry-hw,entrylabs/entry-hw,entrylabs/entry-hw,songhagwon/entry-hw,entrylabs/entry-hw,songhagwon/entry-hw,entrylabs/entry-hw,SungminSeung/entry-hw,kjsii123/entry-hw,entrylabs/entry-hw,kjsii123/entry-hw,songhagwon/entry-hw,SungminSeung/entry-hw,entrylabs/entry-hw,Sungmi... |
6d0baeac86f6f18fda186630cb77285f75403be9 | examples/02-Utility/OutputToneWithSteppedAmplitude/OutputToneWithSteppedAmplitude.ino | examples/02-Utility/OutputToneWithSteppedAmplitude/OutputToneWithSteppedAmplitude.ino | /*
Output Tone With Stepped Amplitude
Chip Audette, OpenAudio 2018
Plays a single tone followed by silence. Repeats the tone+silence at increasing amplitude.
The last tone should definitely distort. The 2nd-to-last tone should be on the edge of distorting.
MIT License, Use at your own risk.
*/
#include ... | /*
Output Tone With Stepped Amplitude
Chip Audette, OpenAudio 2018
Plays a single tone followed by silence. Repeats the tone+silence at increasing amplitude.
The last tone should definitely distort. The 2nd-to-last tone should be on the edge of distorting.
WARNING: DO NOT LISTEN TO THIS WITH HEADPHONES ON... | Add warning message to OutputToneWithSteppedAmplitude example | Add warning message to OutputToneWithSteppedAmplitude example
| Arduino | mit | Tympan/Tympan_Library,Tympan/Tympan_Library,Tympan/Tympan_Library |
1a70f7e66c164b4b450ea510f2a8f24d2683c225 | teensy_octo.ino | teensy_octo.ino | /**
* Teensy Octo v1.0
*
* Custom-built USB peripheral with eight buttons, two PWM RGB LEDs and a Piezo buzzer.
* Based on the Teensy 2 microcontroller - http://www.pjrc.com/teensy
*
* Created as a birthday present to Waher (http://waher.net/about-waher-net)
*
* @author David <david@sqroot.eu> 2013
*
* Use... | /**
* Teensy Octo v1.0
*
* This is the C / Arduino firmware for the Teensy Octo,
* a custom-built USB peripheral with eight buttons, two
* PWM RGB LEDs and a Piezo buzzer.
*
* The microcontroller in use is Teensy 2.0 - http://www.pjrc.com/teensy
*
* Created as a birthday present to Waher (http://waher.net/ab... | Document code | Document code
| Arduino | mit | anroots/teensy-moonica |
f3096253b443c88e41cacdfc18c1434f173d9817 | client_arduino/arduino_client.ino | client_arduino/arduino_client.ino | #include <Arduino.h>
#include <ESP8266WiFi.h>
#include <SoftwareSerial.h>
#include <time.h>
#include <WiFiClientSecure.h>
#include PRIKMETER_CONFIG_INCLUDE
#include "telegram_reader.h"
#define SERIAL_RX_PIN D5
#define LED_PIN D4
#define P1_BUFFER_SIZE_BYTES 64
#define READ_TIMEOUT_MILLIS 5000
#ifndef SERVER_PORT
#d... | #include <Arduino.h>
#include <ESP8266WiFi.h>
#include <SoftwareSerial.h>
#include <time.h>
#include <WiFiClientSecure.h>
#include PRIKMETER_CONFIG_INCLUDE
#include "telegram_reader.h"
#define SERIAL_RX_PIN D5
#define LED_PIN D4
#define P1_BUFFER_SIZE_BYTES 64
#define READ_TIMEOUT_MILLIS 5000
#ifndef SERVER_PORT
#d... | Use actual Morse code for error blinking | Use actual Morse code for error blinking
| Arduino | bsd-3-clause | ttencate/prikmeter,ttencate/prikmeter,ttencate/prikmeter,ttencate/prikmeter,ttencate/prikmeter,ttencate/prikmeter |
cd219d40febcc0e851b9e56cb3af580bd21ab086 | arduino/libraries/TensorFlow/examples/DetectFaces/DetectFaces.ino | arduino/libraries/TensorFlow/examples/DetectFaces/DetectFaces.ino | /*
* Copyright 2022 Google LLC
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to i... | /*
* Copyright 2022 Google LLC
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to i... | make LED blink when face is detected | make LED blink when face is detected
Change-Id: I9611d82df1b856a72bf1133b401c54ac8dba0a7f
GitOrigin-RevId: a15551939514ed531d16eb3eb0f8a99a21e33c4b
| Arduino | apache-2.0 | google-coral/coralmicro,google-coral/coralmicro,google-coral/coralmicro,google-coral/coralmicro,google-coral/coralmicro |
229df2b7403d1a94f68757e417c9c02949ec2ce8 | bot_base.ino | bot_base.ino | /* bot_base.ino ~ Copyright 2015 ~ Paul Beaudet
* MIT licence ~ See licence for details
* Compiled with Arduino IDE 1.6.5
* The goal of this project is to provide remote control and some autonomous
* program modes for a 2 wheeled robot driven by the 2x12 Sabertooth motor controller
* !! no ramping assumes your mot... | /* bot_base.ino ~ Copyright 2015 ~ Paul Beaudet
* MIT licence ~ See licence for details
* Compiled with Arduino IDE 1.6.5
* The goal of this project is to provide remote control and some autonomous
* program modes for a 2 wheeled robot driven by the 2x12 Sabertooth motor controller
* NOTICE!! no ramping, assumes y... | fix consitancy issues with white space | fix consitancy issues with white space
| Arduino | mit | PaulBeaudet/bot_base,PaulBeaudet/bot_base |
0940e29491a6437d4ef490f7dce881102ed1af81 | firmware.ino | firmware.ino | #include <SwitecX25.h>
//-----------------------RGB Variables-----------------------------------//
int LED_RED = 11;
int LED_BLUE = 10;
int LED_GREEN = 9;
int rgbValue = 0;
int light;
//-----------------------Motor Variables--------------------------------//
// standard X25.168 range 315 degrees at 1/10 degree ste... | #include <SwitecX25.h>
//-----------------------RGB Variables-----------------------------------//
int LED_RED = 11;
int LED_BLUE = 10;
int LED_GREEN = 9;
int rgbValue = 0;
int light;
//-----------------------Motor Variables--------------------------------//
// standard X25.168 range 315 degrees at 1/10 degree ste... | Resolve some compiler warnings when using the Makefile. | Resolve some compiler warnings when using the Makefile.
| Arduino | bsd-3-clause | openxc-retro-gauge/retro-gauge-firmware,openxc-retro-gauge/retro-gauge-firmware |
9be407003327ff8f265945f7ad02641c8cfaae93 | Arduino/MAX31850/non_blocking_multiple.ino | Arduino/MAX31850/non_blocking_multiple.ino | //
// Sample of using Async reading of Dallas Temperature Sensors with two sensors
//
#include <OneWire.h>
#include <DallasTemperature.h>
// Data wire is plugged into port 2 on the Arduino
#define ONE_WIRE_BUS 2
#define TEMPERATURE_PRECISION 9
// Setup a oneWire instance to communicate with any OneWire devices (not ... | //
// Sample of using Async reading of Dallas Temperature Sensors with two sensors
//
#include <OneWire.h>
#include <DallasTemperature.h>
// Data wire is plugged into port 2 on the Arduino
#define ONE_WIRE_BUS 2
#define TEMPERATURE_PRECISION 9
// Setup a oneWire instance to communicate with any OneWire devices (not ... | Update non_blocking_multiple.ino | Update non_blocking_multiple.ino | Arduino | cc0-1.0 | Sensorica/Sensor-Network,Sensorica/Sensor-Network,Sensorica/Sensor-Network,Sensorica/Sensor-Network,Sensorica/Sensor-Network,Sensorica/Sensor-Network |
b1e9b2a8086fafe164ed6a78d7927fd2d5f3211c | computer_box/computer_box.ino | computer_box/computer_box.ino | #include <stdlib.h>
#include <OneWire.h>
#include <DHT.h>
#define DHTPIN 3 // DHT Temp & Humidity Pin
#define DHTTYPE DHT22 // DHT 22 (AM2302)
int ac_probe = 0;
int dc_probe = 1;
int led_pin = 13;
int led_value = LOW;
int fan_pin = 4;
int ds18_01_pin = 2;
const int num_ds18 = 3; // Number of DS18B20 Sensors
ui... | #include <stdlib.h>
#include <OneWire.h>
#include <DHT.h>
#define DHTTYPE DHT22 // DHT 22 (AM2302)
const int dht_pin = 3; // DHT Temp & Humidity Pin
const int ac_probe = 0;
const int dc_probe = 1;
const int fan_pin = 4;
const int ds18_01_pin = 2;
const int num_ds18 = 3; // Number of DS18B20 Sensors
int led_valu... | define to const; organize | define to const; organize
| Arduino | mit | panoptes/POCS,panoptes/POCS,AstroHuntsman/POCS,panoptes/POCS,AstroHuntsman/POCS,panoptes/POCS,AstroHuntsman/POCS,AstroHuntsman/POCS,panoptes/PACE |
b0163ac5fe6e61d593d868620d43f8517033106b | arduino/casa_inteligente/casa_inteligente.ino | arduino/casa_inteligente/casa_inteligente.ino | #define TEMPO_NOVA_TENTATIVA 5000
// Carrega biblioteca para economia de energia
#include <Narcoleptic.h>
// Configurações da shield ethernet
#include <SPI.h>
#include <Ethernet.h>
//IPAddress ip(10, 60, 20, 15);
//IPAddress server("m13.cloudmqtt.com");
char server[] = "m13.cloudmqtt.com";
EthernetClient ethClient;
... | #define TEMPO_NOVA_TENTATIVA 5000
// Carrega biblioteca para economia de energia
#include <Narcoleptic.h>
// Configurações da shield ethernet
#include <SPI.h>
#include <Ethernet.h>
//IPAddress ip(10, 60, 20, 15);
//IPAddress server("m13.cloudmqtt.com");
char server[] = "m13.cloudmqtt.com";
EthernetClient ethClient;
... | implementa método para tratar callback da mudança de status do ar | implementa método para tratar callback da mudança de status do ar
| Arduino | mit | brunosavyofs/casa_inteligente |
2b3081dca6f6df62e3baf622fed64a1769fa48c1 | bolt-arduino.ino | bolt-arduino.ino | #include "button.h"
#include "led.h"
#include "screen.h"
#include "game.h"
#include "clock.h"
#include "const.h"
#include "controller.h"
#include "flasher.h"
#include "logger.h"
void setup() {
Serial.begin(115200);
//Attach interrupt for 64 button shield
attachInterrupt(digitalPinToInterrupt(P_BUTTON_INTERRUPT... | #include "button.h"
#include "led.h"
#include "screen.h"
#include "game.h"
#include "clock.h"
#include "const.h"
#include "controller.h"
#include "flasher.h"
#include "logger.h"
void setup() {
Serial.begin(115200);
//Attach interrupt for 64 button shield
attachInterrupt(digitalPinToInterrupt(P_BUTTON_INTERRUPT... | Move procedure to setup | Move procedure to setup
| Arduino | mit | SUPERETDUPER/bolt-arduino |
80c30121a1c5a46185428833763aceb7a6e232e1 | Deploy/rootfolder/sketches/SimpleProtocol/SimpleProtocol.ino | Deploy/rootfolder/sketches/SimpleProtocol/SimpleProtocol.ino | /*
Copyright 2013 Luciano Zu project Ardulink http://www.ardulink.org/
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable ... | /*
Copyright 2013 Luciano Zu project Ardulink http://www.ardulink.org/
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable ... | use ascii 10 instead of 255 as separator | use ascii 10 instead of 255 as separator
| Arduino | apache-2.0 | Ardulink/Ardulink-2,Ardulink/Ardulink-2,Ardulink/Ardulink-2 |
021aaaac1c00e6774c5d507ae95766d4409ec57e | PulseSensorAmped_Arduino_1dot4/PulseSensorAmped_Arduino_1dot4.ino | PulseSensorAmped_Arduino_1dot4/PulseSensorAmped_Arduino_1dot4.ino |
/* Pulse Sensor Amped 1.4 by Joel Murphy and Yury Gitman http://www.pulsesensor.com
---------------------- Notes ---------------------- ----------------------
This code:
1) Blinks an LED to User's Live Heartbeat PIN 13
2) Fades an LED to User's Live HeartBeat
3) Determines BPM
4) Prints All of the Above to... |
/* Pulse Sensor Amped 1.4 by Joel Murphy and Yury Gitman http://www.pulsesensor.com
---------------------- Notes ---------------------- ----------------------
This code:
1) Blinks an LED to User's Live Heartbeat PIN 13
2) Fades an LED to User's Live HeartBeat
3) Determines BPM
4) Prints All of the Above to... | Update PulseSensorAmped_Arduino_1dot4.ino | Update PulseSensorAmped_Arduino_1dot4.ino | Arduino | mit | WorldFamousElectronics/PulseSensor_Amped_Arduino |
83822026335a38a0d4c359b9bc21f4267eb12f59 | remote-control-by-phone/RemoteControl.ino | remote-control-by-phone/RemoteControl.ino | /*
RemoteControl
Demonstrates remotely controlling the Arduino Yun by mobile phone. Uses the Nexmo and
Google Spreadsheet APIs via the Temboo Arduino Yun SDK.
This sketch phones a user when dramatic changes in light level are sensed. The user
can choose to turn on a LED or ignore the Yun's call. The valu... | /*
RemoteControl
Demonstrates remotely controlling the Arduino Yun by mobile phone. Uses the Nexmo and
Google Spreadsheet APIs via the Temboo Arduino Yun SDK.
This sketch phones a user when dramatic changes in light level are sensed. The user
can choose to turn on a LED or ignore the Yun's call. The valu... | Update RemoteControl.ino | Update RemoteControl.ino | Arduino | apache-2.0 | temboo/arduino-examples |
1ba026e66c9c7331dc131067043d4c9e3c4cdc41 | AnimatedGIFs.ino | AnimatedGIFs.ino | /*
* Animated GIFs Display Code for SmartMatrix and 32x32 RGB LED Panels
*
* Uses SmartMatrix Library for Teensy 3.1 written by Louis Beaudoin at pixelmatix.com
*
* Written by: Craig A. Lindley
*
* Copyright (c) 2014 Craig A. Lindley
* Refactoring by Louis Beaudoin (Pixelmatix)
*
* Permission is hereby grante... | /*
* Animated GIFs Display Code for SmartMatrix and 32x32 RGB LED Panels
*
* Uses SmartMatrix Library for Teensy 3.1 written by Louis Beaudoin at pixelmatix.com
*
* Written by: Craig A. Lindley
*
* Copyright (c) 2014 Craig A. Lindley
* Refactoring by Louis Beaudoin (Pixelmatix)
*
* Permission is hereby grante... | add "configuration" instructions at top to make it clearer | add "configuration" instructions at top to make it clearer
| Arduino | mit | pixelmatix/AnimatedGIFs,pixelmatix/AnimatedGIFs |
671c4d43a017637424b2709abae88b7ce2c79cb4 | Arduino/libraries/UA_Sensors/examples/BridgeSensorGSM/BridgeSensorGSM.ino | Arduino/libraries/UA_Sensors/examples/BridgeSensorGSM/BridgeSensorGSM.ino | /*
Bridge Sensor with GSM, SDCard, and RTC
Sketch used by UA Sensors platform.
Notes:
- Sketch handles specific case with current test sensor
where SD Card does not write
- Need to test if this version works on test sensor
Created 14 6 2014
Modified 30 6 2014
*/
#include <LowPower.h>
#include <mat... | /*
Bridge Sensor with GSM, SDCard, and RTC
Sketch used by UA Sensors platform.
Notes:
- Sketch handles specific case with current test sensor
where SD Card does not write
- Need to test if this version works on test sensor
Created 14 6 2014
Modified 30 6 2014
*/
#include <LowPower.h>
#include <mat... | Remove hack since it didn't work... | Remove hack since it didn't work...
| Arduino | unlicense | UAA-EQLNES/EQLNES-Sensors |
b5d42f8b50a6a2eb9a87dcd6ac95ccce4978f0b6 | tft_weatherstation/tft_weatherstation_v5/tft_weatherstation_v5.ino | tft_weatherstation/tft_weatherstation_v5/tft_weatherstation_v5.ino | #include <Adafruit_GFX.h> // Core graphics library
#include <Adafruit_TFTLCD.h> // Hardware-specific library
#include "TSL2561.h"
#include <SFE_BMP180.h>
#include <Wire.h>
#include "DHT.h"
#include <MCUFRIEND_kbv.h>
#define LCD_CS A3 // Chip Select goes to Analog 3
#define LCD_CD A2 // Command/Data goes to Analog 2... | #include <Adafruit_GFX.h> // Core graphics library
#include <Adafruit_TFTLCD.h> // Hardware-specific library
#include "TSL2561.h"
#include <SFE_BMP180.h>
#include <Wire.h>
#include "DHT.h"
#include <MCUFRIEND_kbv.h>
#define LCD_CS A3 // Chip Select goes to Analog 3
#define LCD_CD A2 // Command/Data goes to... | Update tft_weatherstation_v5.ino | Update tft_weatherstation_v5.ino | Arduino | unlicense | bRanger82/ArduinoTemperature,bRanger82/ArduinoTemperature |
82123055168cd2e79b8e02682b7da89c86a0519e | Code/OricKeyboardReader.ino | Code/OricKeyboardReader.ino | // Arduino Micro Oric Keyboard Reader.
#include <HID.h>
#include <Keyboard.h>
#define PIN_INPUT_COL1 2
#define PIN_INPUT_COL2 3
#define PIN_INPUT_COL3 4
#define PIN_INPUT_COL4 5
#define PIN_INPUT_COL5 6
#define PIN_OUTPUT_C6 7
#define PIN_OUTPUT_B7 8
#define PIN_OUTPUT_A8 9
#define PIN_IN... | // Arduino Micro Oric Keyboard Reader.
#include <HID.h>
#include <Keyboard.h>
#define PIN_INPUT_COL1 2
#define PIN_INPUT_COL2 3
#define PIN_INPUT_COL3 4
#define PIN_INPUT_COL4 5
#define PIN_INPUT_COL5 6
#define PIN_OUTPUT_C6 7
#define PIN_OUTPUT_B7 8
#define PIN_OUTPUT_A8 9
#define PIN_IN... | Tidy up code | Tidy up code
| Arduino | mit | LeifBloomquist/OricKeyboardReader |
cedb2092c3718cc9c2f009f86a4746510422ea9a | files/template_home/template_home_2014/template_home_2014.ino | files/template_home/template_home_2014/template_home_2014.ino | /*
SenseBox Citizen Sensingplatform
<<<<<<< HEAD:files/template.ino
Version: 1.2
Date: 2015-01-06
Homepage: http://sensebox.uni-muenster.de/bestellen/fuer-buerger/
Author: Jan Wirwahn
Note: Version with additional sensors for GIS-GK@ifgi
*/
=======
Version: 1.1
Date: 2015-01-14
Homepage: http://www.sensebox.de
Author: ... | /*
SenseBox Citizen Sensingplatform
Version: 1.1
Date: 2015-01-14
Homepage: http://www.sensebox.de
Author: Jan Wirwahn
Note: Sketch for SB-Home Edition 2014
*/
#include <Wire.h>
#include <SPI.h>
#include <EthernetV2_0.h>
#include <DHT.h>
#include <Barometer.h>
#include <avr/wdt.h>
//IDs are being generated by the OSM... | fix merge messages | fix merge messages
| Arduino | mit | chk1/OpenSenseMap-API,mpfeil/OpenSenseMap-API,sensebox/OpenSenseMap-API,mpfeil/OpenSenseMap-API,sensebox/OpenSenseMap-API |
b58805a8a0c5c51ffb0469a374b0eac59af45fa7 | src/Full_decoder/Full_decoder.ino | src/Full_decoder/Full_decoder.ino | #include <Servo.h>
/*
If serial output is desired uncommment the #undef line. For production, i.e.
without computer connected this line should be commented out.
*/
#define DEBUG_OUTPUT
#undef DEBUG_OUTPUT
#ifdef DEBUG_OUTPUT
#define USE_SERIAL
#define DEBUG(x) Serial.print(x)
#define DEBUGLN(x) Serial.println(x)
#el... | #include <Servo.h>
/*
If serial output is desired uncommment the #undef line. For production, i.e.
without computer connected this line should be commented out.
*/
#define DEBUG_OUTPUT
#undef DEBUG_OUTPUT
#ifdef DEBUG_OUTPUT
#define USE_SERIAL
#define DEBUG(x) Serial.print(x)
#define DEBUGLN(x) Serial.println(x)
#el... | Fix power pin options | Fix power pin options
| Arduino | mit | dirkjankrijnders/universal_decoder,dirkjankrijnders/universal_decoder |
314a602c9b72a834265886c0ca5bb0320418a857 | Arduino/LightPlayer/LightPlayer.ino | Arduino/LightPlayer/LightPlayer.ino | #include <SPI.h>
#include <SdFat.h>
#include <FAB_LED.h>
#define DEBUG
// ports used:
// digital 4 - SD card chip select
// digital 6 - strip of 200 APA106 LEDs
// digital 11 - SPI (SD card DI)
// digital 12 - SPI (SD card DO)
// digital 13 - SPI (SD card CLK)
// analog 0 - RF remote button D
// analog 1 - RF remote ... | #include <SPI.h>
#include <SdFat.h>
#include <FAB_LED.h>
#define DEBUG
// ports used:
// digital 4 - SD card chip select
// digital 6 - strip of 200 APA106 LEDs
// digital 11 - SPI (SD card DI)
// digital 12 - SPI (SD card DO)
// digital 13 - SPI (SD card CLK)
// analog 0 - RF remote button D
// analog 1 - RF remote ... | Remove global variable for SPI speed | Remove global variable for SPI speed
| Arduino | mit | godlygeek/LightRender,MaddAddaM/LightRender |
f90c096d22ca166b36bb0fbf1586cf9ab19ab42b | examples/AdafruitHuzzahESP8266Secure/AdafruitHuzzahESP8266Secure.ino | examples/AdafruitHuzzahESP8266Secure/AdafruitHuzzahESP8266Secure.ino | // This example uses an Adafruit Huzzah ESP8266
// to connect to shiftr.io.
//
// You can check on your device after a successful
// connection here: https://shiftr.io/try.
//
// by Joël Gähwiler
// https://github.com/256dpi/arduino-mqtt
#include <ESP8266WiFi.h>
#include <MQTT.h>
const char ssid[] = "ssid";
const cha... | // This example uses an Adafruit Huzzah ESP8266
// to connect to shiftr.io.
//
// You can check on your device after a successful
// connection here: https://shiftr.io/try.
//
// by Joël Gähwiler
// https://github.com/256dpi/arduino-mqtt
#include <ESP8266WiFi.h>
#include <MQTT.h>
const char ssid[] = "ssid";
const cha... | fix esp8266 example and added note about verification | fix esp8266 example and added note about verification
| Arduino | mit | 256dpi/arduino-mqtt,256dpi/arduino-mqtt |
702af665a5dde9ac9f97d532dface54696bb08cb | test/XBee_test/XBee_test.ino | test/XBee_test/XBee_test.ino | /*
XBee test on Mega
For old code that works with Aruidno Uno, see git log and pull it from the repo
Modified upon "Mega multple serial test"
Receives from the main serial port, sends to the others.
Receives from serial port 2 (XBee), sends to the main serial (Serial 0).
This example works only on t... | /*
XBee test on Mega
For old code that works with Aruidno Uno, see git log and pull it from the repo
Modified upon "Mega multple serial test"
Receives from the main serial port, sends to the others.
Receives from serial port 2 (XBee), sends to the main serial (Serial 0).
This example works only on t... | add led test | add led test
| Arduino | bsd-2-clause | nebgnahz/HOBS,nebgnahz/HOBS,nebgnahz/HOBS |
cbbf29b2af51eb23e86afc460d36a982c75966ea | MP3PlayerwithHC06/MP3PlayerwithHC06.ino | MP3PlayerwithHC06/MP3PlayerwithHC06.ino | /*
* MP3 Player with DFPlayer Mini, Bluetooth (HC-05) Module
* Made by Darkhost (darkhost225@gmail.com)
* Required Library : SoftwareSerial, DFRobotDFPlayerMini
* Last Update : 2018.06.22
* Bluetooth RX - 8 / TX - 9
* DFPlayer RX - 11 / TX - 12
* Serial Speed 115200 / DFPlayer Serial Speed 9600 / Bluetooth Seria... | /*
* MP3 Player with DFPlayer Mini, Bluetooth (HC-06) Module
* Made by Darkhost (darkhost225@gmail.com)
* Required Library : SoftwareSerial, DFRobotDFPlayerMini
* Last Update : 2018.06.22
* Bluetooth RX - 8 / TX - 9
* DFPlayer RX - 11 / TX - 12
* Serial Speed 115200 / DFPlayer Serial Speed 9600 / Bluetooth Seria... | Edit MP3PlayerwithHC06.ino | Edit MP3PlayerwithHC06.ino
| Arduino | mit | Darkhost/Arduino |
b03d2560de68b84d5d75e6e17dda624bccf86084 | projects/arduino/plant_emoji/src/plant_emoji/plant_emoji.ino | projects/arduino/plant_emoji/src/plant_emoji/plant_emoji.ino | //Put the following code into arduino
long soilhumid;
long humid;
int dataIn = 2;
int load = 3;
int clock = 4;
byte max7219_reg_noop = 0x00;
byte max7219_reg_digit0 = 0x01;
byte max7219_reg_digit1 = 0x02;
byte max7219_reg_digit2 = 0x03;
byte max7219_reg_digit3 = 0x04;
byte max7219_reg_digit4 = 0x05;
byte max7219_reg_... | //Put the following code into arduino
long soilhumid;
long humid;
int dataIn = 2;
int load = 3;
int clock = 4;
byte max7219_reg_noop = 0x00;
byte max7219_reg_digit0 = 0x01;
byte max7219_reg_digit1 = 0x02;
byte max7219_reg_digit2 = 0x03;
byte max7219_reg_digit3 = 0x04;
byte max7219_reg_digit4 = 0x05;
byte max7219_reg_... | Update plant_emoji.ino | Update plant_emoji.ino | Arduino | mit | borq79/cs.edu,borq79/cs.edu |
ee79105c73f07f51032c7fb4efcf8dc3bb2a232b | geiger_esp/geiger_esp.ino | geiger_esp/geiger_esp.ino | #include <stdint.h>
#include <ESP8266WiFi.h>
#include <WiFiManager.h>
#include <PubSubClient.h>
#define MQTT_HOST "mosquitto.space.revspace.nl"
#define MQTT_PORT 1883
#define TOPIC_GEIGER "revspace/sensors/geiger"
#define LOG_PERIOD 15000 //Logging period in milliseconds, recommended value 15000-60000... | #include <stdint.h>
#include <string.h>
#include <ESP8266WiFi.h>
#include <WiFiManager.h>
#include <PubSubClient.h>
#define MQTT_HOST "mosquitto.space.revspace.nl"
#define MQTT_PORT 1883
#define TOPIC_GEIGER "revspace/sensors/geiger"
#define LOG_PERIOD 10
static char esp_id[16];
static WiFiManager wifiMana... | Use a more advanced algorithm showing actual count over past minute | Use a more advanced algorithm showing actual count over past minute
| Arduino | bsd-2-clause | revspace/geiger,revspace/geiger |
c7f225f19a739c56e0e9953f9206ce8533bf5732 | Arduino/sendRF/sendRF.ino | Arduino/sendRF/sendRF.ino | #include <SPI.h>
#include <RF24.h>
#include "printf.h"
// ce, csn pins
RF24 radio(9, 10);
byte ID[4];
char rxBuff[14];
int state = 3;
void setup() {
Serial.begin(9600);
// put your setup code here, to run once:
radio.begin();
radio.setPALevel(RF24_PA_MAX);
radio.setChannel(0x76);
radio.openWritingPipe(0... | #include <SPI.h>
#include <RF24.h>
#include "printf.h"
// ce, csn pins
RF24 radio(9, 10);
char rxBuff[15];
int state = 3;
char ID[3], quant[3], temp[3], sound[3], vel[3];
int StrToHex(char str[])
{
return (int) strtol(str, 0, 16);
}
uint16_t hex2int(char *hex) {
uint16_t val = 0;
for(int i = 0 ; i < 3 ;... | Add conversion HexString to uint16_t | Add conversion HexString to uint16_t
| Arduino | mit | CarlosPena00/Mobbi,CarlosPena00/Mobbi |
32450dfc4d84715c02a736a81a7de4e4464e70aa | interduino/src/sketch.ino | interduino/src/sketch.ino | // Interduino is the physical manifestation of cigtee - an arduino sketch designed to take serial commands to make stuff happen IRL
void setup()
{
Serial.begin(9600);
pinMode(13, OUTPUT);
}
int pinState[6];
void loop()
{
if(Serial.available()){
int ledState = Serial.read();
if(ledState == 65){
digitalWri... | // Interduino is the physical manifestation of cigtee - an arduino sketch designed to take serial commands to make stuff happen IRL
void setup()
{
Serial.begin(9600);
pinMode(13, OUTPUT);
}
int pinState[6];
void loop()
{
if(Serial.available()){
int ledState = Serial.read();
if(ledState == 65){
digitalWri... | Change logic for serial commands | Change logic for serial commands
| Arduino | agpl-3.0 | NegativeK/telehack,NegativeK/telehack |
e6ea21e424adf49823a5ccb4d95c9d7fbf07a72a | Ecran/BotMenu/BotMenu.ino | Ecran/BotMenu/BotMenu.ino | /**
* \file BotMenu.cpp
* \brief Code d'affichage de l'écran
* \author Nicolas Sobczak
* \date octobre 2016
*/
#include "U8glib.h"
#include "M2tk.h"
#include "utility/m2ghu8g.h"
#include "utility/mas.h"
// setup u8g object
U8GLIB_ST7920_128X64_1X u8g(13, 51, 14); // SPI Com: SCK = en = 13, MOSI = rw ... | /**
* \file BotMenu.cpp
* \brief Code d'affichage de l'écran
* \author Nicolas Sobczak
* \date octobre 2016
*/
#include "U8glib.h"
#include "M2tk.h"
#include "utility/m2ghu8g.h"
#include "utility/mas.h"
// setup u8g object
U8GLIB_ST7920_128X64_1X u8g(13, 51, 14); // SPI Com: SCK = en = 13, MOSI = rw ... | update BotMenu.ino | update BotMenu.ino
| Arduino | mit | nsobczak/CoupeDeFrance,nsobczak/CoupeDeFrance,nsobczak/CoupeDeFrance,nsobczak/CoupeDeFrance,nsobczak/CoupeDeFrance |
7735b1a305470fa60ea82e4204cc487f88f523c2 | GyroSketch/GyroSketch.ino | GyroSketch/GyroSketch.ino | /*===================
*= TO DO =
*===================
*
*1. Find BaudRate of CAN system
*Determine id
*Determine what frame is (CAN library)
*
*/
//===============================================
// I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files
// for both classes must... | /*===================
*= TO DO =
*===================
*
*1. Find BaudRate of CAN system
*Determine id
*Determine what frame is (CAN library)
*
*/
//===============================================
// I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files
// for both classes must... | add debug option for serial output | add debug option for serial output
| Arduino | mit | BrendonEarl/UVicHybridGyro,BrendonEarl/UVicHybridGyro |
3ea260d8e05da39626b19248576bc475b9f0456f | _64-esp8266-atmega328p-i2c8x8-mma-8452-dash-button/a-01-esp-01/a-01-esp-01.ino | _64-esp8266-atmega328p-i2c8x8-mma-8452-dash-button/a-01-esp-01/a-01-esp-01.ino | // esp-01 1M / 64K SPIFFS
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#include <Wire.h>
#include "Adafruit_LEDBackpack.h"
#include "Adafruit_GFX.h"
#include "/usr/local/src/ap_setting.h"
extern "C" {
#include "user_interface.h"
}
ADC_MODE(ADC_VCC);
#define IPSET_STATIC { 192, 168, 10, 12 }
#define IPSET_GATE... | // esp-01 1M / 64K SPIFFS
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#include <Wire.h>
#include "Adafruit_LEDBackpack.h"
#include "Adafruit_GFX.h"
#include "/usr/local/src/ap_setting.h"
extern "C" {
#include "user_interface.h"
}
ADC_MODE(ADC_VCC);
#define IPSET_STATIC { 192, 168, 10, 16 }
#define IPSET_GATE... | change wifi_connect to wifi_event | change wifi_connect to wifi_event
with static ip, delay has problem
| Arduino | lgpl-2.1 | chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino |
a50a3c3651cb19d819639fd25f770e17681a7a0d | 03-PlantMonitor/Code/02-InternetHouseplantMonitor/InternetHouseplantMonitor.ino | 03-PlantMonitor/Code/02-InternetHouseplantMonitor/InternetHouseplantMonitor.ino | /* SparkFun Inventor's Kit for Photon
Experiment 3 - Part 2: Internet Houseplant Monitor
This sketch was written by SparkFun Electronics
Joel Bartlett <joel@sparkfun.com>
August 31, 2015
https://github.com/sparkfun/Inventors_Kit_For_Photon_Experiments
This application monitors the moisture le... | /* SparkFun Inventor's Kit for Photon
Experiment 3 - Part 2: Internet Houseplant Monitor
This sketch was written by SparkFun Electronics
Joel Bartlett <joel@sparkfun.com>
August 31, 2015
https://github.com/sparkfun/Inventors_Kit_For_Photon_Experiments
This application monitors the moisture le... | Update InternetHouseplantMonitor.ino | Update InternetHouseplantMonitor.ino
Line 25: Typo in comment
Line 30: New syntax for firmware version >= 0.47 | Arduino | mit | sparkfun/Inventors_Kit_For_Photon_Experiments,sparkfun/Inventors_Kit_For_Photon_Experiments |
2520845a89e4af7544d2e35dd5287c35d19c6559 | src/main.ino | src/main.ino | /**
* 370GT
* @author Kevin Tjiam <kevin@tjiam.com>
*/
#include <Arduino.h>
#include <stdint.h>
#include <string.h>
#include <debug_trace.h>
#include <app_error.h>
#include <sara_u2.h>
#include <max_m8.h>
#include "conf.h"
static sara_u2_modem_t g_modem;
static max_m8_gps_t g_gps;
void modem_event_handler(sara_u2... | /**
* 370GT
* @author Kevin Tjiam <kevin@tjiam.com>
*/
#include <Arduino.h>
#include <Wire.h> /* Do not remove: required by max_m8 (platformio) */
#include <stdint.h>
#include <string.h>
#include <debug_trace.h>
#include <app_error.h>
#include <sara_u2.h>
#include <max_m8.h>
#include "conf.h"
static sara_u2_modem_... | add Wire.h dependency to main to prevent platformio build from failing (what the fuck?) | add Wire.h dependency to main to prevent platformio build from failing (what the fuck?)
| Arduino | mit | hellstad/370gt-proto,hellstad/370gt-proto |
350d9ebb3010ff6053505cbb7828847cf77dfb9d | MQTT433gateway.ino | MQTT433gateway.ino | /*
MQTT433gateway - MQTT 433.92 MHz radio gateway utilizing ESPiLight
Project home: https://github.com/puuu/MQTT433gateway/
The MIT License (MIT)
Copyright (c) 2016 Puuu
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation files
(the... | /*
MQTT433gateway - MQTT 433.92 MHz radio gateway utilizing ESPiLight
Project home: https://github.com/puuu/MQTT433gateway/
The MIT License (MIT)
Copyright (c) 2016 Puuu
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation files
(the... | replace NULL | src/MQTT433gateway.cpp: replace NULL
Signed-off-by: Jan Losinski <577c4104c61edf9f052c616c0c23e67bef4a9955@wh2.tu-dresden.de>
| Arduino | mit | puuu/MQTT433gateway,puuu/MQTT433gateway,puuu/MQTT433gateway,puuu/MQTT433gateway,puuu/MQTT433gateway,puuu/MQTT433gateway |
14698a69aa02e17f5868d881d319e73a91cff88d | Lifter/Lifter.ino | Lifter/Lifter.ino | #include <AccelStepper.h>
#include <Servo.h>
// #defines are macros for faster pin access than built-in digitalWrite().
// *http://masteringarduino.blogspot.com/2013/10/fastest-and-smallest-digitalread-and.html
#define portOfPin(P)\
(((P)>=0&&(P)<8)?&PORTD:(((P)>7&&(P)<14)?&PORTB:&PORTC))
#define ddrOfPin(P)\
((... | #include <AccelStepper.h>
#include <Servo.h>
// #defines are macros for faster pin access than built-in digitalWrite().
// *http://masteringarduino.blogspot.com/2013/10/fastest-and-smallest-digitalread-and.html
#define portOfPin(P)\
(((P)>=0&&(P)<8)?&PORTD:(((P)>7&&(P)<14)?&PORTB:&PORTC))
#define ddrOfPin(P)\
((... | fix Serial.print error | fix Serial.print error
| Arduino | mit | JoeSuber/CardLifter |
d9a571414d69c86e4d0126c5ee05aede71834167 | ActiSense/AlertMe/feature/feature/src/main/resources/agent/AlertMe.ino | ActiSense/AlertMe/feature/feature/src/main/resources/agent/AlertMe.ino | /**
* Copyright (c) 2017, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
*
* WSO2 Inc. licenses this file to you under the Apache License,
* Version 2.0 (the "License"); you may not use this file except
* in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/... | /**
* Copyright (c) 2017, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
*
* WSO2 Inc. licenses this file to you under the Apache License,
* Version 2.0 (the "License"); you may not use this file except
* in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/... | Set to turn on buzzer and LED for testing | Set to turn on buzzer and LED for testing
| Arduino | apache-2.0 | charithag/iot-server-samples,charithag/iot-server-samples,charithag/iot-server-samples,charithag/iot-server-samples,charithag/iot-server-samples,charithag/iot-server-samples |
37889f9da6c5e37da99254cc98edd1f1b83d9d9c | examples/MAX1464_example.ino | examples/MAX1464_example.ino | /*
Example sketch for the MAX1464 library.
Copyright (C) 2016 Giacomo Mazzamuto <gmazzamuto@gmail.com>
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or ... | /*
Example sketch for the MAX1464 library.
Copyright (C) 2016 Giacomo Mazzamuto <gmazzamuto@gmail.com>
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or ... | add macros for pins | example: add macros for pins
| Arduino | lgpl-2.1 | gmazzamuto/MAX1464-Arduino-library,gmazzamuto/MAX1464-Arduino-library |
5cfff1769d6d8220a4601e5266b61035af0da818 | examples/esp8266_firmware/esp8266_firmware.ino | examples/esp8266_firmware/esp8266_firmware.ino | /* This sketch implements a user-friendly though slightly ridiculous serial-wifi bridge for an ESP8266 chip.
Upload this sketch to an ESP8266, connect the RX and TX pins to (software or hardware) pins of an arduino
and use the barf library on arduino for super-easy bidirectional sending of statuses and commands ove... | /* This sketch implements a user-friendly though slightly ridiculous serial-wifi bridge for an ESP8266 chip.
Upload this sketch to an ESP8266, connect the RX and TX pins to (software or hardware) pins of an arduino
and use the barf library on arduino for super-easy bidirectional sending of statuses and commands ove... | Send host header when requesting resources | Send host header when requesting resources
| Arduino | mit | kirberich/barf,kirberich/barf |
9810e896d1cde20d0a3bc35b2abc9151bceb686a | libraries/Esplora/examples/Beginners/EsploraJoystickMouse/EsploraJoystickMouse.ino | libraries/Esplora/examples/Beginners/EsploraJoystickMouse/EsploraJoystickMouse.ino | /*
Esplora Joystick Mouse
This sketch shows you how to read the joystick and use it to control the movement
of the cursor on your computer. You're making your Esplora into a mouse!
WARNING: this sketch will take over your mouse movement. If you lose control
of your mouse do the following:
1) unplug the Esp... | /*
Esplora Joystick Mouse
This sketch shows you how to read the joystick and use it to control the movement
of the cursor on your computer. You're making your Esplora into a mouse!
WARNING: this sketch will take over your mouse movement. If you lose control
of your mouse do the following:
1) unplug the Esplo... | Update to Esplora example | Update to Esplora example
Added Mouse.press to Esplora Joystick Mouse example
| Arduino | lgpl-2.1 | fungxu/Arduino,mangelajo/Arduino,championswimmer/Arduino,damellis/Arduino,gestrem/Arduino,Protoneer/Arduino,paulo-raca/ESP8266-Arduino,ccoenen/Arduino,smily77/Arduino,probonopd/Arduino,paulmand3l/Arduino,bsmr-arduino/Arduino,xxxajk/Arduino-1,superboonie/Arduino,leftbrainstrain/Arduino-ESP8266,HCastano/Arduino,paulmand3... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.