commit stringlengths 40 40 | old_file stringlengths 2 205 | new_file stringlengths 2 205 | old_contents stringlengths 0 32.9k | new_contents stringlengths 1 38.9k | subject stringlengths 3 9.4k | message stringlengths 6 9.84k | lang stringlengths 3 13 | license stringclasses 13
values | repos stringlengths 6 115k |
|---|---|---|---|---|---|---|---|---|---|
0054ef2a0259d2e7993545d2fab6af6ecaa05bdb | inverted-pendulum.ino | inverted-pendulum.ino | // Inverted pendulum - for Teensy 3.2
#include "Encoder.h"
#include "Pendulum.h"
#include "PIDControl.h"
#include "SimpleShell.h"
#define LEFT HIGH
#define RIGHT LOW
#define TRACK_ENCODER_PIN_A 0
#define TRACK_ENCODER_PIN_B 1
#define PENDULUM_ENCODER_PIN_A 2
#define PENDULUM_ENCODER_PIN_B 3
#define LEFT_BUMP_PIN 4
#d... | // Inverted pendulum - for Teensy 3.2
#include "Encoder.h"
#include "Pendulum.h"
#include "PIDControl.h"
#include "SimpleShell.h"
#define LEFT HIGH
#define RIGHT LOW
#define TRACK_ENCODER_PIN_A 0
#define TRACK_ENCODER_PIN_B 1
#define PENDULUM_ENCODER_PIN_A 2
#define PENDULUM_ENCODER_PIN_B 3
#define LEFT_BUMP_PIN 4
#d... | Use Pendulum::update | Use Pendulum::update
| Arduino | mit | andrewadare/inverted-pendulum |
d4c7a3a0278c6ab3793abef96e515e35f2f67a32 | resilient_network/resilient_network.ino | resilient_network/resilient_network.ino | // resilient network
#include <SoftwareSerial.h>
#include "Arduino.h"
#include "timers.h"
#define leds1pin 11
#define leds2pin 3
#define button1pin 2
#define button2pin 4
#define SERIAL_DEBUG true
#define DROPPING_CONNECTOR 254
#define ALERT 255
#define NUM_CONN 3
SoftwareSerial* bus[NUM_CONN];
int RX[NUM_CONN] =... | // resilient network
#include <SoftwareSerial.h>
#include "Arduino.h"
#include "timers.h"
#define leds1pin 11
#define leds2pin 3
#define button1pin 2
#define button2pin 4
#define SERIAL_DEBUG true
#define DROPPING_CONNECTOR 254
#define ALERT 255
#define NUM_CONN 3
SoftwareSerial* bus[NUM_CONN];
int RX[NUM_CONN] =... | Initialize based on isSource | Initialize based on isSource
| Arduino | mit | knopjesmuseum/resilient-network,knopjesmuseum/resilient-network |
7f51831d740b228405293913a031562b01d578af | Edzna/device/main.ino | Edzna/device/main.ino | /*
MQTT Light for Home-Assistant - NodeMCU (ESP8266)
https://home-assistant.io/components/light.mqtt/
Libraries :
- ESP8266 core for Arduino : https://github.com/esp8266/Arduino
- PubSubClient : https://github.com/knolleary/pubsubclient
Sources :
- File > Examples > ES8266WiFi > WiFiClient
... | /*
MQTT Light for Home-Assistant - NodeMCU (ESP8266)
https://home-assistant.io/components/light.mqtt/
Libraries :
- ESP8266 core for Arduino : https://github.com/esp8266/Arduino
- PubSubClient : https://github.com/knolleary/pubsubclient
Sources :
- File > Examples > ES8266WiFi > WiFiClient
... | Update main.ino | Update main.ino | Arduino | apache-2.0 | TheIoTLearningInitiative/CodeLabs,TheIoTLearningInitiative/CodeLabs,TheIoTLearningInitiative/CodeLabs,TheIoTLearningInitiative/CodeLabs,TheIoTLearningInitiative/CodeLabs,TheIoTLearningInitiative/CodeLabs |
a58cd727e47c58ea0d88f3bebcd9e0d06bdf4edd | EmotionalClothing.ino | EmotionalClothing.ino | #include <WaveHC.h>
#include <WaveUtil.h>
String fileNames[4] = {"BUGS2.WAV", "DAFFY1.WAV", "BUGS1.WAV", "DAFFY2.WAV"};
SdReader card; // This object holds the information for the card
FatVolume vol; // This holds the information for the partition on the card
FatReader root; // This holds the information for ... | #include <WaveHC.h>
#include <WaveUtil.h>
#include <Wire.h>
#include "Adafruit_TCS34725.h"
String fileNames[4] = {"BUGS2.WAV", "DAFFY1.WAV", "BUGS1.WAV", "DAFFY2.WAV"};
SdReader card; // This object holds the information for the card
FatVolume vol; // This holds the information for the partition on the card
Fat... | Implement setup for RGB Color Sensor | Implement setup for RGB Color Sensor
| Arduino | mit | IgorGee/Emotional-Clothing |
b453e09c78a09b8f2528012cf48721793828deae | src/audio_sampler/src/audio_sampler/audio_sampler.ino | src/audio_sampler/src/audio_sampler/audio_sampler.ino | /*
* Silence Thresholder
* For Chatty Coasters
*/
/* DECLARATIONS */
/* Discretize audio input to one sample every SAMPLE_WINDOW mS:
* e.g. 50mS = 20Hz sample rate. */
const int sampleWindow = 50;
/* After TIME_THRESH sampleWindows below VOL_THRESH, trigger event
* 20Hz * 5S wait time = 100 */
int timeThresh =... | /*
* Silence Thresholder
* For Chatty Coasters
*/
/* DECLARATIONS */
/* Discretize audio input to one sample every SAMPLE_WINDOW mS:
* e.g. 50mS = 20Hz sample rate. */
const int sampleWindow = 50;
/* After TIME_THRESH sampleWindows below VOL_THRESH, trigger event
* 20Hz * 5S wait time = 100 */
int timeThresh =... | fix normalizing issues | fix normalizing issues
| Arduino | mit | jhaazpr/live-object |
bd4330ed996e0b36a631f6a407defab385f1dcd9 | arduino/magsensor/magsensor.ino | arduino/magsensor/magsensor.ino | #include <EEPROM.h>
#include <RCSwitch.h>
#include <LowPower.h>
#include "limits.h"
#include "protocol.h"
#include "sensor_types.h"
#include "voltmeter.h"
#include "diagnostic.h"
RCSwitch rfDevice = RCSwitch();
int SERIAL_COMMUNICATION_SPEED = 9600;
// How long do we sleep. The longer, the better for the battery but ... | #include <EEPROM.h>
#include <RCSwitch.h>
#include <LowPower.h>
#include "limits.h"
#include "protocol.h"
#include "sensor_types.h"
#include "voltmeter.h"
#include "diagnostic.h"
RCSwitch rfDevice = RCSwitch();
int SERIAL_COMMUNICATION_SPEED = 9600;
// How long do we sleep. The longer, the better for the battery but ... | Use only one codeword now. | Use only one codeword now.
| Arduino | apache-2.0 | jdmichaud/domos,jdmichaud/domos,jdmichaud/domos,jdmichaud/domos,jdmichaud/domos,jdmichaud/domos |
acc63e8b7cfb6609a960e87de6279d23ea9d9586 | examples/all1V8Sensors/all1V8Sensors.ino | examples/all1V8Sensors/all1V8Sensors.ino | /*
* All 1.8 V sensors example
*
* This sketch shows you how to use all 1.8 V ROHM sensors simultaneously.
*
* Before powering up your Arduino, make sure to select 1.8V on jumper J15 on the shield!
*/
// define all the sensors we will use
#define INCLUDE_ALL_1V8_SENSORS
// include the library
#inc... | /*
* All 1.8 V sensors example
*
* This sketch shows you how to use all 1.8 V ROHM sensors simultaneously.
*
* Before powering up your Arduino, make sure to select 1.8V on jumper J15 on the shield!
*/
// define all the sensors we will use
#define INCLUDE_ALL_1V8_SENSORS
// include the library
#inc... | Update all1V8Sensors.ino | Update all1V8Sensors.ino | Arduino | mit | jgromes/RohmMultiSensor |
e27a87bf3cc83a5adc5733bad754df7d37dd9630 | RGB_lamps/RGB_lamps.ino | RGB_lamps/RGB_lamps.ino | #include <ComplementaryColors.h>
#include <RGBLamp.h>
/*
RGBLamp.h - Library for controlling RGB diodes.
Created by Claus Lensbøl, May 19, 2013.
For license, see LICENSE file.
*/
RGBLamp lamps[4];
int colors[216][3];
int dayCols[20][3];
int cycleFade[4] = {0,0,0,0};
void setup() {
Serial.begin(9600);
ra... | #include <ComplementaryColors.h>
#include <RGBLamp.h>
/*
RGBLamp.h - Library for controlling RGB diodes.
Created by Claus Lensbøl, May 19, 2013.
For license, see LICENSE file.
*/
RGBLamp lamps[4];
int colors[216][3];
int dayCols[20][3];
float cycleFade[4] = {0,0,0,0};
void setup() {
Serial.begin(9600);
... | Fix fades | Fix fades
| Arduino | mit | cmol/arduino-rgb,cmol/arduino-rgb |
9a82032664419f118ff5bc62033174d441e5101d | loggertask.ino | loggertask.ino | void IRAM_ATTR loggerTask ( void * pvParameters )
{
const TickType_t loggerTaskdelayTime = ( 1000 * 120 ) / portTICK_PERIOD_MS;
while (1)
{
const char * appendError = "Failed to write to log file.";
char content[60];
uint8_t charCount = 0;
static bool systemHasBooted = tr... | void IRAM_ATTR loggerTask ( void * pvParameters )
{
const TickType_t loggerTaskdelayTime = ( 1000 * 120 ) / portTICK_PERIOD_MS;
while (1)
{
const char * appendError = "Failed to write to log file.";
char content[60];
uint8_t charCount = 0;
static bool systemHasBooted = tr... | Reset strings are now locals. | Reset strings are now locals.
| Arduino | mit | CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32,CelliesProjects/aquacontrol32 |
846e8703a73c2a695bd9e009d95e7de00532d746 | examples/02.IO/Brightness/Brightness.ino | examples/02.IO/Brightness/Brightness.ino | #include <ParkingShield.h>
ParkingShield shield;
void setup()
{
Serial.begin(9600);
}
void loop()
{
Serial.print(F("Light intensity is : " ));
Serial.print(shield.getBrightness() / 1024. * 100);
Serial.print(" %% \n");
delay(1000);
}
| #include <ParkingShield.h>
ParkingShield shield;
void setup()
{
Serial.begin(9600);
}
void loop()
{
Serial.print(F("Light intensity is : " ));
Serial.print(shield.getBrightness() / 1024. * 100);
Serial.print(" % \n");
delay(1000);
}
| Fix typo | Fix typo
| Arduino | mit | iotl/IoT-Shield-Firmware |
935ecd462a38fc789a09917528f0be850b9a379b | examples/withoutLib_SS/withoutLib_SS.ino | examples/withoutLib_SS/withoutLib_SS.ino | /*
1 - THIS EXAMPLE DOES NOT USES CS5490 LIBRARY, use only if you want to understand
only if you are having some trouble or needs to understante how it works
2 - THIS EXAMPLES USES SoftwareSerial library, it means that will be useful
only for ARDUINO UNO, ESP8622 and others
*/
#include <SoftwareSerial.h>
#define... | /*
1 - THIS EXAMPLE DOES NOT USES CS5490 LIBRARY, use only if you want to understand
only if you are having some trouble or needs to understante how it works
2 - THIS EXAMPLES USES SoftwareSerial library, it means that will be useful
only for ARDUINO UNO, ESP8622 and others
*/
#include <SoftwareSerial.h>
#define... | Fix UNO Bug withoutLib_SS | Fix UNO Bug withoutLib_SS
| Arduino | mit | tiagolobao/CS5490 |
5a8deca244682109b1a2f9131fab3d8418211397 | IHM595/exemples/HelloWorld/HelloWorld.ino | IHM595/exemples/HelloWorld/HelloWorld.ino | /*
* Marcelo H Moraes
* marceloh220@hotmail.com
*
* Hello World!
* All the fancy is only for demonstration
*/
#include <IHM595.h>
uint8_t s,m,h;
uint64_t mil;
IHM595 board(2,3,4);
void setup() {
board.background(HIGH);
board.set(2,0);
String a = "Hello World!";
board.print(a);
}
void loop() {
boa... | /*
* Marcelo H Moraes
* marceloh220@hotmail.com
*
* Hello World!
* All the fancy is only for demonstration
*/
#include <IHM595.h>
uint8_t s,m,h;
uint64_t mil;
//(Data pin, Clock pin, Enable pin)
IHM595 board(2,3,4);
void setup() {
board.background(HIGH);
board.set(2,0);
String a = "Hello World!";
boar... | Update HelloWorld.ino | Update HelloWorld.ino | Arduino | mit | marceloh220/Arduino,marceloh220/Arduino |
7808924273ffc9b71b6872004ea8b5b1c401e060 | NeoPixelNightLight/NeoPixelNightLight.ino | NeoPixelNightLight/NeoPixelNightLight.ino | #include <EEPROM.h>
// RTC
// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
#include <Wire.h>
#include "RTClib.h"
#if defined(ARDUINO_ARCH_SAMD)
// for Zero, output on USB Serial console, remove line below if using programming port to program the Zero!
#define Serial SerialUSB
#endif
RTC_... | #include <EEPROM.h>
// RTC
// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
#include <Wire.h>
#include "RTClib.h"
#if defined(ARDUINO_ARCH_SAMD)
// for Zero, output on USB Serial console, remove line below if using programming port to program the Zero!
#define Serial SerialUSB
#endif
RTC_... | add dst to nightlight | add dst to nightlight
| Arduino | mit | Seekatar/GpioPlayground,Seekatar/GpioPlayground,Seekatar/GpioPlayground,Seekatar/GpioPlayground,Seekatar/GpioPlayground |
7964b68546837c858916bbe10edc1fc488915426 | examples/FSM/CosaPingPong/CosaPingPong.ino | examples/FSM/CosaPingPong/CosaPingPong.ino | /**
* @file CosaPingPong.ino
* @version 1.0
*
* @section License
* Copyright (C) 2012, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the... | /**
* @file CosaPingPong.ino
* @version 1.0
*
* @section License
* Copyright (C) 2012, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the... | Fix return value from state transition functions. | Fix return value from state transition functions.
| Arduino | lgpl-2.1 | jeditekunum/Cosa,dansut/Cosa,dansut/Cosa,jeditekunum/Cosa,mikaelpatel/Cosa,kc9jud/Cosa,mikaelpatel/Cosa,rrobinet/Cosa,rrobinet/Cosa,mikaelpatel/Cosa,SinishaDjukic/Meshwork,rrobinet/Cosa,SinishaDjukic/Meshwork,mikaelpatel/Cosa,jeditekunum/Cosa,kc9jud/Cosa,kc9jud/Cosa,jeditekunum/Cosa,kc9jud/Cosa,dansut/Cosa,SinishaDjuki... |
929edb6b0e74d05d5776392da644e4854bf5e036 | examples/accel/accel.ino | examples/accel/accel.ino | #include <Helper2.h>
#include <Wire.h>
void setup() {
initialize();
led1.off();
led2.color(0);
led2.off();
led2.color(0.5);
}
void loop() {
if (accel.freefall()) {
led1.on();
} else {
led1.off();
}
if (accel.active()) {
led2.on();
} else {
led2.off();
}
wait(20);
};
| #include <Helper2.h>
#include <Wire.h>
void setup() {
initialize();
led1.off();
led1.color(0.5);
led2.off();
led2.color(0.5);
}
void loop() {
if (accel.freefall()) {
led1.on();
} else {
led1.off();
}
if (accel.active()) {
led2.on();
} else {
led2.off();
}
wait(20);
}
| update accel.ino | update accel.ino | Arduino | mit | UEC-VBSeminar/Helper2.h |
11e1812dc4140d05334592f9f490842c95e8691b | examples/Wireless/CosaWirelessDS18B20/CosaWirelessDS18B20.ino | examples/Wireless/CosaWirelessDS18B20/CosaWirelessDS18B20.ino | /**
* @file CosaWirelessDS18B20.ino
* @version 1.0
*
* @section License
* Copyright (C) 2013-2014, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* versio... | /**
* @file CosaWirelessDS18B20.ino
* @version 1.0
*
* @section License
* Copyright (C) 2013-2014, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* versio... | Correct wireless power-down in example sketch; CosaWirelessDS18B20. | Correct wireless power-down in example sketch; CosaWirelessDS18B20.
| Arduino | lgpl-2.1 | mikaelpatel/Cosa,rrobinet/Cosa,jeditekunum/Cosa,kc9jud/Cosa,kc9jud/Cosa,kc9jud/Cosa,dansut/Cosa,jeditekunum/Cosa,dansut/Cosa,mikaelpatel/Cosa,jeditekunum/Cosa,jeditekunum/Cosa,rrobinet/Cosa,kc9jud/Cosa,mikaelpatel/Cosa,mikaelpatel/Cosa,rrobinet/Cosa,dansut/Cosa,rrobinet/Cosa,dansut/Cosa |
c6163d05d2a515426f723a0de7eb466611289565 | code/LadybugAttiny85/LadybugAttiny85.ino | code/LadybugAttiny85/LadybugAttiny85.ino | #include <LadybugActions.h>
#include <Bounce2.h>
#include <Adafruit_NeoPixel.h>
#include <avr/sleep.h>
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
enum color_mode {
MODE_RAINBOW,
MODE_BREATHE,
MODE_RANDOM
};
#defin... | #include <LadybugActions.h>
#include <Bounce2.h>
#include <Adafruit_NeoPixel.h>
#include <avr/sleep.h>
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
enum color_mode {
MODE_RAINBOW,
MODE_BREATHE,
MODE_RANDOM
};
#defin... | Clean up some whitespace. | Clean up some whitespace.
| Arduino | mit | z2amiller/ladybug |
92b70045a2ca3107561e92d0ac4d2ea1e3fc60af | MagnusCore/MagnusCore.ino | MagnusCore/MagnusCore.ino | #include <Adafruit_NeoPixel.h>
#include <stdlib.h>
#include <string.h>
#include "animation.hpp"
#include "circbuff.hpp"
// first communication pin for neo pixel string
#define BASE_PIN 2
#define NUM_STRINGS 1 // one for each resonator
//#define NUM_STRINGS 8 // one for each resonator
const uint16_t LEDS_PE... | #include <Adafruit_NeoPixel.h>
#include <stdlib.h>
#include <string.h>
#include "animation.hpp"
#include "circbuff.hpp"
// first communication pin for neo pixel string
#define BASE_PIN 2
#define NUM_STRINGS 1 // one for each resonator
//#define NUM_STRINGS 8 // one for each resonator
const uint16_t LEDS_... | Fix whitespace woes | Fix whitespace woes
| Arduino | mit | TeamNorCal/arduino-portal-core |
5ca25ea6490047fc1df68b88bb867ea60e372acb | RssDisp/RssDisp.ino | RssDisp/RssDisp.ino | #include "conf.h"
#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESP8266HTTPClient.h>
#include <time.h>
#if USE_OTA
#include <ArduinoOTA.h>
#include "ota_util.h"
#endif
#include <Adafruit_GFX.h>
#include <Fontx.h>
#include <fontx/ILGH16XB.h>
#include <fontx/ILGZ16XB.h>
#inc... | #include "conf.h"
#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESP8266HTTPClient.h>
#include <time.h>
#if USE_OTA
#include <ArduinoOTA.h>
#include "ota_util.h"
#endif
#include <Adafruit_GFX.h>
#include <Fontx.h>
#include <fontx/ILGH16XB.h>
#include <fontx/ILGZ16XB.h>
#inc... | fix bug:screen display was sisturbed | fix bug:screen display was sisturbed
| Arduino | mit | h-nari/HSES_NODE_OLED_Sample_programs,h-nari/HSES_NODE_OLED_Sample_programs,h-nari/HSES_NODE_OLED_Sample_programs |
d2a77460b6c2eea91823082ac1dd6c6b65b2420a | WirelessTrigger.ino | WirelessTrigger.ino | #define ROLE_GROUND 0
#define ROLE_SKY 1
// SET THE TARGET ROLE HERE -------------------------------
#define ROLE ROLE_SKY
// Standard libraries
#include <Arduino.h>
#include <printf.h>
// Radio comms
#include <RF24_config.h>
#include <nRF24L01.h>
#include <RF24.h>
#if ROLE == ROLE_GROUND
// Smart... | #define ROLE_GROUND 0
#define ROLE_SKY 1
// SET THE TARGET ROLE HERE -------------------------------
#define ROLE ROLE_SKY
// Standard libraries
#include <Arduino.h>
#include <printf.h>
// Radio comms
#include <RF24_config.h>
#include <nRF24L01.h>
#include <RF24.h>
#if ROLE == ROLE_GROUND
// Smart... | Add logic to attempt to fix zero issue | Add logic to attempt to fix zero issue
| Arduino | mit | WasabiFan/aerial-release-system,WasabiFan/aerial-release-system |
8cb77cb604b09312ea0806f07020e09fa587d82f | docs/arduino-nano-netshield/ant_switch_arduino_netshield.ino | docs/arduino-nano-netshield/ant_switch_arduino_netshield.ino | #include <UIPEthernet.h>
/*
*
* Arduino nano + ENC29J60 ethernet shield antenna switch
*
* 8 selecteable antennas in digital outputus d2,d3,d4,d5,d6,d7,d8,d9
*
* curl http://172.16.50.19/?cmd=1 set antenna 1 (only)
* curl http://172.16.50.19/?cmd=+1 add antenna 1
* curl http://172.16.50.19/?cmd=-1 remove an... | #include <UIPEthernet.h>
/*
*
* Arduino nano + ENC29J60 ethernet shield antenna switch
*
* 8 selecteable antennas in digital outputs d2,d3,d4,d5,d6,d7,d8,d9
*
* curl http://172.16.50.19/?cmd=1 set antenna 1 (only)
* curl http://172.16.50.19/?cmd=+1 add antenna 1
* curl http://172.16.50.19/?cmd=-1 remove ant... | Update ant_switch_arduino_netshield.ino | Update ant_switch_arduino_netshield.ino | Arduino | mit | OH1KK/KiwiSDR-antenna-switch-extension,OH1KK/KiwiSDR-antenna-switch-extension,OH1KK/KiwiSDR-antenna-switch-extension |
6ff9afacd42399d1464caff32cb8b181bb0744f2 | arduino/rflink/rflink.ino | arduino/rflink/rflink.ino | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "rfm69.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "radio.h"
// Arduino needs these in the .ino file ...
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
// number of time divisio... | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "rfm69.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "radio.h"
// Arduino needs these in the .ino file ...
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
// number of time divisio... | Set baudrate using a Long type | Set baudrate using a Long type
| Arduino | mit | bertrik/rflink,bertrik/rflink |
8440a0f76061abd895c7e092e82439b9fd6fba34 | camera_box/camera_box.ino | camera_box/camera_box.ino | #include <Wire.h>
#include <stdlib.h>
#include <Adafruit_MMA8451.h>
#include <Adafruit_Sensor.h>
#include <DHT.h>
#define DHTPIN 4 // DHT Temp & Humidity Pin
#define DHTTYPE DHT22 // DHT 22 (AM2302)
int CAM_01_PIN = 5;
int CAM_02_PIN = 6;
int led_pin = 13;
int led_value = LOW;
Adafruit_MMA8451 mma = Adafruit_MMA... | #include <Wire.h>
#include <stdlib.h>
#include <Adafruit_MMA8451.h>
#include <Adafruit_Sensor.h>
#include <DHT.h>
#define DHTPIN 4 // DHT Temp & Humidity Pin
#define DHTTYPE DHT22 // DHT 22 (AM2302)
int CAM_01_PIN = 5;
int CAM_02_PIN = 6;
int led_pin = 13;
int led_value = LOW;
Adafruit_MMA8451 mma = Adafruit_MMA... | Support reading serial in so we can toggle cameras (and led); cleaning up debug statements | Support reading serial in so we can toggle cameras (and led); cleaning up debug statements
| Arduino | mit | AstroHuntsman/POCS,AstroHuntsman/POCS,panoptes/POCS,AstroHuntsman/POCS,panoptes/POCS,AstroHuntsman/POCS,panoptes/POCS,panoptes/POCS,panoptes/PACE |
57f9dba516a10a756fdba51cf9a01e9a0af009e8 | K_Nearest_Neighbors_Template/K_Nearest_Neighbors_Template.ino | K_Nearest_Neighbors_Template/K_Nearest_Neighbors_Template.ino | #include <Arduino.h>
#include <math.h>
// FIXME: Add the libraries needed for each pin
#include "Object.h"
// FIXME: Can change pin number
#define IR_SENSOR_PIN_1 6
// Define Pins for each sensor
// Distance Sensor (Height)
int test = 0;
bool wait = false;
// Define anything else needed for sensors
... | #include <Arduino.h>
#include <math.h>
// FIXME: Add the libraries needed for each pin
#include "Object.h"
// FIXME: Can change pin number
#define IR_SENSOR_PIN_1 6
// Define Pins for each sensor
// Distance Sensor (Height)
int test = 0;
bool wait = false;
// Define anything else needed for sensors
... | Update K_Nearest_Neighbors_Template.ino | Update K_Nearest_Neighbors_Template.ino | Arduino | mit | baileyherms/Pattern-Recognition,baileyherms/Pattern-Recognition |
7be52c441c63b632514f1903a84f41a0b89b52da | onboard_controller/onboard_controller.ino | onboard_controller/onboard_controller.ino | #include <math.h>
#include <Adafruit_GPS.h>
#include <SoftwareSerial.h>
/*--debug macros--*/
//#define readDebug //print Serial1 reads to console
//#define writeDebug //print Serial1 writes to console
#define fakeGPS //fake the presence of a gps
//#define rawGPSDebug //print raw gps data to console
//make sure these ... | #include <math.h>
#include <Adafruit_GPS.h>
#include <SoftwareSerial.h>
/*--debug macros--*/
//#define readDebug //print Serial1 reads to console
//#define writeDebug //print Serial1 writes to console
#define fakeGPS //fake the presence of a gps
//#define rawGPSDebug //print raw gps data to console
//make sure these ... | switch flags to use struct for clarity test directive triggers flag | switch flags to use struct for clarity
test directive triggers flag
| Arduino | mit | CURocketry/LaunchVehicleController2015,CURocketry/LaunchVehicleController |
2483f719446e1a0b65ba3305ad7d07acb8aaeb4a | interduino/src/sketch.ino | interduino/src/sketch.ino | // Interduino is the physical manifestation of cigtee - an arduino sketch designed to take serial commands to make stuff happen IRL
void setup()
{
Serial.begin(9600);
pinMode(13, OUTPUT);
}
int pinState[6];
void loop()
{
if(Serial.available()){
int ledState = Serial.read();
if(ledState == 65){
digitalWri... | // Interduino is the physical manifestation of cigtee - an arduino sketch designed to take serial commands to make stuff happen IRL
void setup()
{
Serial.begin(9600);
pinMode(13, OUTPUT);
}
int pinState[6];
void loop()
{
if(Serial.available()){
int ledState = Serial.read();
if(ledState == 65){
digitalWri... | increase delay | increase delay
| Arduino | agpl-3.0 | NegativeK/telehack,NegativeK/telehack |
1e457462e1643b543bb31b7bb0e8acf4a182df6a | Photon/IoTlib/examples/starter/starter.ino | Photon/IoTlib/examples/starter/starter.ino | /******************************************************************
Example starting point sketch for Patriot library
This example uses the built-in blue LED.
You can use the Patriot iOS app or Alexa or the Alexa app to turn
the LED on or off.
It is provided as a quick start for your own sketches.
Refer also to the e... | /******************************************************************
Example starting point sketch for Patriot library
This example uses the built-in blue LED.
You can use the Patriot iOS app or Alexa or the Alexa app to turn
the LED on or off.
It is provided as a quick start for your own sketches.
Refer also to the e... | Add non-pwm argument | Add non-pwm argument
| Arduino | mit | rlisle/ParticleIoT,rlisle/Patriot,rlisle/Patriot,rlisle/ParticleIoT,rlisle/Patriot,rlisle/Patriot,rlisle/ParticleIoT |
a50f624275ca3d8c918cc78a18f5dd25c9966e4a | arduinoTest/USB_FocusST_PCB/USB_FocusST_PCB.ino | arduinoTest/USB_FocusST_PCB/USB_FocusST_PCB.ino | /*
-------------------------------------------------
| Zachary Nelson
| znelson1@ford.com
|
| **To be used with Shift Knob PCBs**
|
| Test communication over USB with Android host
| to read in and display current gear.
|
| Using a 74hc595 shift register and a
| 7-sement display to display the numbers 0 - 9. It
| is u... | /*
-------------------------------------------------
| Zachary Nelson
| znelson1@ford.com
|
| **To be used with Shift Knob PCBs**
|
| Test communication over USB with Android host
| to read in and display current gear.
|
| Using a 74hc595 shift register and a
| 7-sement display to display the numbers 0 - 9. It
| is u... | add motor pulse functionality. | add motor pulse functionality.
| Arduino | bsd-3-clause | openxc/shiftknob-android |
4d0548170b6db631f7a2e53349b2832ff891babd | countdown/countdown.ino | countdown/countdown.ino | #include "FastSPI_LED2.h"
#define ROWS 10
#define COLS 10
#define NUM_LEDS (ROWS*COLS)
CRGB leds[NUM_LEDS];
CRGB walker_leds[NUM_LEDS]; //separate array that holds the leds that 'walk/move out' of the table
CRGB counter_leds[NUM_LEDS]; //separate array that holds the counter (digits)
// Return 0-based led index for ... | #include "FastSPI_LED2.h"
#include "Streaming.h"
#define ROWS 10
#define COLS 10
#define NUM_LEDS (ROWS*COLS)
CRGB leds[NUM_LEDS];
CRGB walker_leds[NUM_LEDS]; //separate array that holds the leds that 'walk/move out' of the table
CRGB counter_leds[NUM_LEDS]; //separate array that holds the counter (digits)
// Return... | Sort of working: need smoother walking, and pause in-between leds | Sort of working: need smoother walking, and pause in-between leds
| Arduino | mit | padvinder95/ledtafel |
5156ff9909e7cc14c50462f6f40c575162b8002f | MainStation/MainStation.ino | MainStation/MainStation.ino | //
// Display Temp
//
// Use Library from :
// Adafruit BMP085 https://github.com/adafruit/Adafruit_BMP085_Unified
// Adafruit Sensor https://github.com/adafruit/Adafruit_Sensor
// LCD : https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
// Touch Sensor : https://github.com/arduino-libraries/CapacitiveSenso... | //
// Display Temp
//
// Use Library from :
// Adafruit BMP085 https://github.com/adafruit/Adafruit_BMP085_Unified
// Adafruit Sensor https://github.com/adafruit/Adafruit_Sensor
// LCD : https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
// Touch Sensor : https://github.com/arduino-libraries/CapacitiveSenso... | Add TX Node TeleInfo | Add TX Node TeleInfo
| Arduino | mit | totothekiller/weather-station,totothekiller/weather-station |
7e7fb2321f70b2deed0cf1d0850404cf68507663 | examples/test/test.ino | examples/test/test.ino | /*
* #### ####
* #### ####
* #### #### ##
* #### #### ####
* #### ############ ############ #### ########## #### ... | /*
* #### ####
* #### ####
* #### #### ##
* #### #### ####
* #### ############ ############ #### ########## #### ... | Add gate I/O state to test function. | Add gate I/O state to test function.
| Arduino | bsd-3-clause | logickworkshop/du-ino,logickworkshop/du-ino |
08ea6aee0a3656dc613f0ff3b10ca35198059e20 | examples/ReadAndWrite/ReadAndWrite.ino | examples/ReadAndWrite/ReadAndWrite.ino | /*
* MFRC522 - Library to use ARDUINO RFID MODULE KIT 13.56 MHZ WITH TAGS SPI W AND R BY COOQROBOT.
* The library file MFRC522.h has a wealth of useful info. Please read it.
* The functions are documented in MFRC522.cpp.
*
* Based on code Dr.Leong ( WWW.B2CQSHOP.COM )
* Created by Miguel Balboa (circuitito.com)... | /*
* MFRC522 - Library to use ARDUINO RFID MODULE KIT 13.56 MHZ WITH TAGS SPI W AND R BY COOQROBOT.
* The library file MFRC522.h has a wealth of useful info. Please read it.
* The functions are documented in MFRC522.cpp.
*
* Based on code Dr.Leong ( WWW.B2CQSHOP.COM )
* Created by Miguel Balboa (circuitito.com)... | Update ReadAndWrite.ino | Update ReadAndWrite.ino
Comments need to be corrected to match Arduino Mega pinout | Arduino | unlicense | Rotzbua/rfid,yaalsn/rfid,sophiekovalevsky/rfid,1upon0/rfid,r44947/rfid,smallkid/rfid,webdevbrian/rfid,mirko314/rfid,lpr0lpd/rfid,CapeSepias/rfid,mangine/mraa_MFRC522,miguelbalboa/rfid,irhastofa/rfid,prikevs/rfid,juantejedavz/rfid,Rotzbua/rfid,tamchau2809/rfid,LaloHao/rfid,hramrach/rfid,northDacoder/rfid |
b378453e64c45cc2404fb75eda6c2e7120377bbe | teensy_hat_firmware/teensy_hat_firmware.ino | teensy_hat_firmware/teensy_hat_firmware.ino | #include "Defines.h"
#include "PinPulseIn.h"
#include "FlySkyIBus.h"
#include "PCA9685Emulator.h"
#include <Servo.h>
PinPulseIn<11> rcSteer;
PinPulseIn<12> rcThrottle;
PinPulseIn<13> rcMode;
Servo svoSteer;
Servo svoThrottle;
uint16_t iBusInput[10];
FlySkyIBus fsIbus(IBUS_SERIAL, iBusInput, 10);
PCA9685Emulator p... | #include "Defines.h"
#include "PinPulseIn.h"
#include "FlySkyIBus.h"
#include "PCA9685Emulator.h"
#include <Servo.h>
PinPulseIn<11> rcSteer;
PinPulseIn<12> rcThrottle;
PinPulseIn<13> rcMode;
Servo svoSteer;
Servo svoThrottle;
uint16_t iBusInput[10];
FlySkyIBus fsIbus(IBUS_SERIAL, iBusInput, 10);
PCA9685Emulator p... | fix protocol bugs | fix protocol bugs
| Arduino | mit | jwatte/donkey_racing,jwatte/donkey_racing,jwatte/donkey_racing,jwatte/donkey_racing |
b8171e34ed23c7ba31bc903639b0c9b5cc76afc0 | ins-node/src/wifi_module/wifi_module.ino | ins-node/src/wifi_module/wifi_module.ino | #include <stdint.h>
#include <vector>
#include <utility>
#include <ESP8266WiFi.h>
#include "wifi_credentials.h"
#define device_id 1;
ESP8266WiFiClass wifi;
const char SERVER_IP[] = "192.168.0.136";
const int8_t CONNECTION_RETRIES = 3; // The maximum amount of wifi connection attempts
const uint8_t TRANSMISSION_SIZE =... | #include <stdint.h>
#include <vector>
#include <utility>
#include <ESP8266WiFi.h>
#include "wifi_credentials.h"
ESP8266WiFiClass wifi;
EspClass espPower;
const uint8_t DEVICE_ID = 1; // The identification for the specific node
const char SERVER_IP[] = "192.168.0.136";
const int8_t CONNECTION_RETRIES = 3; // The maximu... | Use locally created variable for ESP | Use locally created variable for ESP
This will facilitate testing
| Arduino | apache-2.0 | platisd/indoor-navigation-system,platisd/indoor-navigation-system,platisd/indoor-navigation-system,platisd/indoor-navigation-system |
1a94f8c8becb6e3efe3c8e98a385b1581ffc8b59 | octotemp/code/OctoTemp/OctoTemp/OctoTemp.ino | octotemp/code/OctoTemp/OctoTemp/OctoTemp.ino | #include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <Math.h>
#include <Wire.h>
#include <prometheus.h>
#include <adc128d818.h>
#define SDAPIN 13
#define SCLPIN 12
#define SERVER_IP "10.1.20.200"
#define SERVER_PORT 9091
// TODO(z2amiller): Set up interrupts to call back when the temperature... | #include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <Math.h>
#include <Wire.h>
#include <prometheus.h>
#include <adc128d818.h>
#define SDAPIN 13
#define SCLPIN 12
#define SERVER_IP "10.1.20.200"
#define SERVER_PORT 9091
// TODO(z2amiller): Set up interrupts to call back when the temperature... | Initialize the wire library explicitly. | Initialize the wire library explicitly.
| Arduino | apache-2.0 | z2amiller/snippets |
6236dadd6cda55c30326d0323b987e567625a86e | Arduino/six_legged_robot/six_legged_robot.ino | Arduino/six_legged_robot/six_legged_robot.ino | // ==========================================================
// ==== 六足机器人综合程序 ====
// ==========================================================
// ====== 各模块与 Arduino Mega2560 的连接方式 ======
// 左侧为模块引脚，右侧为2560引脚
/**
* LCD连接:
*
* LCD Arduino
* PIN1 --> GND
* PIN2 --... | // ==========================================================
// ==== 六足机器人综合程序 ====
// ==========================================================
// ====== 各模块与 Arduino Mega2560 的连接方式 ======
// 左侧为模块引脚，右侧为2560引脚
/**
* LCD连接:
*
* LCD Arduino
* PIN1 --> GND
* PIN2 --... | 添加11-13动作组 | 添加11-13动作组
| Arduino | mit | chulinyin/graduation_design_software |
e52bae7e4157ef4e831d5aa4467c7e27dc73180c | roto.ino | roto.ino | /* Copyright (c) 2018 Peter Teichman */
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SerialFlash.h>
#include "amfm_audio.h"
#include "manual.h"
#include "monitor_audio.h"
#include "tonewheel_osc_audio.h"
#include "vibrato_audio.h"
// Hammond B-3.
AudioMixer4 organOut;
TonewheelOsc tonewheels;
Moni... | /* Copyright (c) 2018 Peter Teichman */
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SerialFlash.h>
#include "amfm_audio.h"
#include "manual.h"
#include "monitor_audio.h"
#include "tonewheel_osc_audio.h"
#include "vibrato_audio.h"
// Hammond B-3.
AudioMixer4 organOut;
TonewheelOsc tonewheels;
Moni... | Copy leslie to usb audio output | Copy leslie to usb audio output
| Arduino | mit | pteichman/roto,pteichman/roto |
2d076d0364dcdd3bf3ffd59f2b8cb0ff3a077496 | Arduino/linkit_duo_led6/linkit_duo_led6.ino | Arduino/linkit_duo_led6/linkit_duo_led6.ino | #include <PololuLedStrip.h>
#include <random_seed.h>
#include <auto_brightness.h>
#include <color_math.h>
#include <colors.h>
#include <command_processor.h>
#include <power_ease.h>
#include <elastic_ease.h>
#include <blink_effects.h>
#include <breathe_effects.h>
#include <effects_processor.h>
#include <buffer.h>
#inclu... | #include <PololuLedStrip.h>
#include <random_seed.h>
#include <auto_brightness.h>
#include <color_math.h>
#include <colors.h>
#include <command_processor.h>
#include <power_ease.h>
#include <elastic_ease.h>
#include <blink_effects.h>
#include <breathe_effects.h>
#include <effects_processor.h>
#include <buffer.h>
#inclu... | fix fade | fix fade | Arduino | mit | jhogsett/linkit,jhogsett/linkit,jhogsett/linkit,jhogsett/linkit,jhogsett/linkit,jhogsett/linkit |
86089e6b8a48e16e7bcbdb375a0e965ea7186117 | OpenCTD_Feather_Adalogger/OpenCTD_master_m0/OpenCTD_master_m0.ino | OpenCTD_Feather_Adalogger/OpenCTD_master_m0/OpenCTD_master_m0.ino |
//Date and time functions using a DS3231 RTC connected via I2C and Wire lib
#include <Wire.h>
#include "RTClib.h"
//serial peripheral interface and library for SD card reader
#include <SPI.h> //serial peripheral interface for SD card reader
#include <SD.h> //library for SD card reader
//communication protocols for t... |
//Date and time functions using a DS3231 RTC connected via I2C and Wire lib
#include <Wire.h>
#include "RTClib.h"
//serial peripheral interface and library for SD card reader
#include <SPI.h> //serial peripheral interface for SD card reader
#include <SD.h> //library for SD card reader
//communication protocols for t... | Fix EC & Temp Sensor Timing Bug | Fix EC & Temp Sensor Timing Bug
Fixes issue that caused EC sensor output to occasionally contain weird characters or miss line-endings. I found this happened when the serial data from the EC sensor happened to come in at the same time that a temperature sensor was sending its data (which occurred because the temp sens... | Arduino | mit | OceanographyforEveryone/OpenCTD |
04ea0a1621b590fbc6d35c99e719b79e0d0ad1bb | software/firmware/LogoBotWifiScribbler/LogoBotWifiScribbler.ino | software/firmware/LogoBotWifiScribbler/LogoBotWifiScribbler.ino | #include <AccelStepper.h>
#include <CommandQueue.h>
#include <LogobotText.h>
#include <Servo.h>
// Maths stuff
#define DEGTORAD PI/180.0
#define RADTODEG 180.0/PI
// Pin definitions
// Left motor driver
#define motorLPin1 2 // IN1 on the ULN2003 driver 1
#define motorLPin2 3 // IN2 on the ULN2003 driver 1... | #include <AccelStepper.h>
#include <CommandQueue.h>
#include <LogobotText.h>
#include <Servo.h>
// Maths stuff
#define DEGTORAD PI/180.0
#define RADTODEG 180.0/PI
// Pin definitions
// Left motor driver
#define motorLPin1 2 // IN1 on the ULN2003 driver 1
#define motorLPin2 3 // IN2 on the ULN2003 driver 1... | Remove unused variables (no space saving, must have been optimised away) | Remove unused variables (no space saving, must have been optimised away)
| Arduino | mit | snhack/LogoBot,snhack/LogoBot,snhack/LogoBot,snhack/LogoBot,snhack/LogoBot |
667fda5e19ef7c4c7d2a4b009b27a6da43ba94b7 | Arduino/weather-tree.ino | Arduino/weather-tree.ino | #include "neopixel/neopixel.h"
#include "PixelControl.h"
Adafruit_NeoPixel neopixelRingLarge = Adafruit_NeoPixel(24, 4, WS2812);
PixelControl ringLarge = PixelControl();
Adafruit_NeoPixel neopixelRingMedium = Adafruit_NeoPixel(16, 5, WS2812);
PixelControl ringMedium = PixelControl();
Adafruit_NeoPixel neopixelRingS... | #include "neopixel/neopixel.h"
#include "PixelControl.h"
Adafruit_NeoPixel neopixelRingLarge = Adafruit_NeoPixel(24, 4, WS2812);
PixelControl ringLarge = PixelControl();
Adafruit_NeoPixel neopixelRingMedium = Adafruit_NeoPixel(16, 5, WS2812);
PixelControl ringMedium = PixelControl();
Adafruit_NeoPixel neopixelRingS... | Add rain function | Add rain function
| Arduino | mit | projectweekend/Spark-Core-Weather-Tree,projectweekend/Spark-Core-Weather-Tree |
92a71762946d1309c41efc3bbb82021d6736ee16 | arduino/rflink/rflink.ino | arduino/rflink/rflink.ino | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "radio.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
static void print(char *fmt, ...)
{
char buf[128]; // resulting string limited to 12... | #include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "radio.h"
#include "cmdproc.h"
#include "editline.h"
#include "hal.h"
#include "SPI.h"
#include "EEPROM.h"
// EEPROM address of node id
#define EE_ADDR_ID 0
// number of time division slots
#define NUM_SLOTS 9
static void print(char *fmt, ...... | Implement buffer status command, indicate reception only when status changes, mark buffer empty after reading it | Implement buffer status command, indicate reception only when status changes, mark buffer empty after reading it
| Arduino | mit | bertrik/rflink,bertrik/rflink |
48819826442cf96e8447c3ce009e24ed6bbb0323 | arduino/sensor/sensor.ino | arduino/sensor/sensor.ino | #include <Wire.h>
#include <SoftwareSerial.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include <dht.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>
#include <LowPower.h>
/* Datapins for DS18B20, DHT22 and software serial
The BMP180 must be connected to the I2C interface */
#define ONE_WIRE_P... | #include <Wire.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include <dht.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>
#include <LowPower.h>
#include <SPI.h>
#include "RF24.h"
/* configuration for DS18B20, DHT22 and NRF24L01
The BMP180 must be connected to the I2C interface */
#define ONE_W... | Change Bluetooth to RF24 | Change Bluetooth to RF24
| Arduino | mit | IPSW1/RasPi_Station,IPSW1/RasPi_Station,IPSW1/RasPi_Station |
47eafcc60a0f563eba21c3ce1711642e2e22300a | arduino/src/sketch.ino | arduino/src/sketch.ino | #include <DHT.h>
#include <TimerOne.h>
#define MQ7PIN A0
#define MQ2PIN A2
#define DHTPIN 8
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
float h = 0;
float t = 0;
int mq7Value = 0;
int mq2Value = 0;
int readMQ7() {
int value;
value = analogRead(pin);
if (isnan(value)) {
return NULL;
} els... | #include <DHT.h>
#include <TimerOne.h>
#define MQ7PIN A0
#define MQ2PIN A2
#define DHTPIN 8
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
float h = 0;
float t = 0;
int mq7Value = 0;
int mq2Value = 0;
int readMQ7() {
int value;
value = analogRead(pin);
if (isnan(value)) {
return -1;
} else ... | implement serialize function | implement serialize function
| Arduino | mit | pedroscaff/sensor_platform,pedroscaff/sensor_platform |
2a6e1ee76fdd75e7c8877ea09e2db76e6fdc85dc | examples/SxXBee2/SxXBee2.ino | examples/SxXBee2/SxXBee2.ino | /*
* SxXBee2.ino
*
* Changed on: 12.10.2015 new protocol rev1.1
* Changed on: 04.09.2015 broadcast of power state
* Created on: 28.08.2015
*
*
* Author and Copyright: Michael Blank
*
* reads date from xbee and sends them to SX Bus
*
* !!! SX lib does not work with SoftwareSerial Lib !!!
*
* H... | /*
* SxXBee2.ino
*
* Changed on: 12.10.2015 new protocol rev1.1
* Changed on: 04.09.2015 broadcast of power state
* Created on: 28.08.2015
*
*
* Author and Copyright: Michael Blank
*
* reads date from xbee and sends them to SX Bus
*
* !!! SX lib does not work with SoftwareSerial Lib !!!
*
* H... | Update SxXBee2.ino | Update SxXBee2.ino
#include <SX22Command.h> ("22" fehlte)
SX22Command sxcmd; ("22" fehlte) | Arduino | agpl-3.0 | opensx/SX22b |
ad44c3470577cbec871d5f482fe51a5656099547 | examples/IniFileExample/IniFileExample.ino | examples/IniFileExample/IniFileExample.ino | #include <SD.h>
//#include <IniFile.h>
#include <SPI.h>
#include <Ethernet.h>
#include <IniFile.h>
// The select pin used for the SD card
//#define SD_SELECT 4
#define SD_SELECT 22
#define ETHERNET_SELECT 10
void printErrorMessage(uint8_t e, bool eol = true)
{
switch (e) {
case IniFile::errorNoError:
Serial.... | #include <SD.h>
#include <SPI.h>
#include <Ethernet.h>
#include <IniFile.h>
// The select pin used for the SD card
//#define SD_SELECT 4
#define SD_SELECT 22
#define ETHERNET_SELECT 10
void printErrorMessage(uint8_t e, bool eol = true)
{
switch (e) {
case IniFile::errorNoError:
Serial.print("no error");
... | Remove old code | Remove old code
| Arduino | lgpl-2.1 | stevemarple/IniFile,stevemarple/IniFile |
d82689c2074f64fca777d0a2af5513e88c9bd77d | examples/MDriver_no_PWM/MDriver_no_PWM.ino | examples/MDriver_no_PWM/MDriver_no_PWM.ino | #include "MDriver.h"
/*
*Этот пример управляет двигателями без ШИМ(PWM) сигнала, при этом на пины
*ENA и ENB на плате драйвера двигателей подтянуты к высокому логическому уровню (+5V).
*
* Библиотека MDrive предназначена для управление коллекторными двигателями
* посредством драйвера двигателей на микросхеме L293... | #include "MDriver.h"
/*
*Этот пример управляет двигателями без ШИМ(PWM) сигнала, при этом на пины
*ENA и ENB на плате драйвера двигателей подтянуты к высокому логическому уровню (+5V).
*
* Библиотека MDrive предназначена для управление коллекторными двигателями
* посредством драйвера двигателей на микросхеме L293... | Update MDriver_no_PWM.ino | Update MDriver_no_PWM.ino | Arduino | mit | AlcoCoder/MDriver |
3cf5f30e230e181010e75695a828bb6a08053d9c | Accessory_Controller/Accessory_Controller.ino | Accessory_Controller/Accessory_Controller.ino |
#include <SPI.h>
#include <mcp_can.h>
#include "BMW_R1200_GS_K25_CAN_Bus_Defines.h"
#include "BMW_R1200_GS_K25_State.h"
/* Compile time Flags */
#define DEBUG 0
#define PRINT_STATUS_TO_SERIAL_CONSOLE 1
/* Helper Macros */
#define HI_NIBBLE(b) (((b) >> 4) & 0x0F)
#define LO_NIBBLE(b) ((b) & 0x0F)
/* Debug Macros *... |
#include <SPI.h>
#include <mcp_can.h>
#include "BMW_R1200_GS_K25_CAN_Bus_Defines.h"
#include "BMW_R1200_GS_K25_State.h"
/* Compile time Flags */
#define DEBUG 0
#define PRINT_STATUS_TO_SERIAL_CONSOLE 1
/* Helper Macros */
#define HI_NIBBLE(b) (((b) >> 4) & 0x0F)
#define LO_NIBBLE(b) ((b) & 0x0F)
/* Debug Macros *... | add support for controlling th aux lights with a monster motor driver | add support for controlling th aux lights with a monster motor driver
| Arduino | mit | 4G-Gregg/BMW-GS-CAN-Sniffer,4G-Gregg/BMW-GS-CAN-Sniffer,4G-Gregg/BMW-GS-CAN-Sniffer |
9275283d6d9853f54f45cd2ec295969374532501 | firmware/Arduino/Arduino.ino | firmware/Arduino/Arduino.ino | void setup() {
Serial.begin(9600);
pinMode(2, OUTPUT);
pinMode(3, OUTPUT);
pinMode(4, OUTPUT);
pinMode(5, OUTPUT);
pinMode(6, OUTPUT);
pinMode(7, OUTPUT);
pinMode(8, OUTPUT);
pinMode(9, OUTPUT);
pinMode(10, OUTPUT);
pinMode(11, OUTPUT);
pinMode(12, OUTPUT);
pinMode(13, OUTPUT);
for (int ... | void setup() {
Serial.begin(9600);
pinMode(2, OUTPUT);
pinMode(3, OUTPUT);
pinMode(4, OUTPUT);
pinMode(5, OUTPUT);
pinMode(6, OUTPUT);
pinMode(7, OUTPUT);
pinMode(8, OUTPUT);
pinMode(9, OUTPUT);
pinMode(10, OUTPUT);
pinMode(11, OUTPUT);
pinMode(12, OUTPUT);
pinMode(13, OUTPUT);
for (int ... | Change initial state of all pins to LOW for new Relay Module | ENH: Change initial state of all pins to LOW for new Relay Module | Arduino | bsd-3-clause | SiLab-Bonn/basil,SiLab-Bonn/basil,MarcoVogt/basil |
4cba472625728c7d5471421342720ae7ec13fc13 | arduino/blinkytape_orb.ino | arduino/blinkytape_orb.ino | #include <EEPROM.h>
#include <FastLED.h>
#include "visuals.h"
#include "state.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define COLOR_TEMPERATURE OvercastSky
#define DATA_PIN 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define EXTRA_PIN_A 7
#define EXTRA_PIN_B 11
#define EEPROM_ST... | #include <EEPROM.h>
#include <FastLED.h>
#include "visuals.h"
#include "state.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define COLOR_TEMPERATURE OvercastSky
#define DATA_PIN 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define EXTRA_PIN_A 7
#define EXTRA_PIN_B 11
#define EEPROM_ST... | Use ternary for incr, drop _ms on delay variables | Use ternary for incr, drop _ms on delay variables
| Arduino | mit | jtai/blinkytape-orb,jtai/blinkytape-orb |
f82f7c886bfe5db04a787647d750cdf6074669e0 | examples/ready_to_localize/ready_to_localize.ino | examples/ready_to_localize/ready_to_localize.ino | #include <Pozyx.h>
#include <Pozyx_definitions.h>
#include <Wire.h>
////////////////////////////////////////////////
////////////////// PARAMETERS //////////////////
////////////////////////////////////////////////
uint8_t num_anchors = 4;
uint16_t anchors[4] = {0x6641,0x6639,0x663D,0x6670};
int32_t heights[4] = {250... | #include <Pozyx.h>
#include <Pozyx_definitions.h>
#include <Wire.h>
////////////////////////////////////////////////
////////////////// PARAMETERS //////////////////
////////////////////////////////////////////////
uint8_t num_anchors = 4; // the number of anchors
uint16_t anchors[4... | Update ready to localize example | Update ready to localize example
The example now also includes:
- manual anchor calibration
- output for the processing sketch | Arduino | mit | pozyxLabs/Pozyx-Arduino-library,pozyxLabs/Pozyx-Arduino-library |
e6ab8ed3be7354c45bf7821ae425901574a8327b | MarantzVolumeMonitor.ino | MarantzVolumeMonitor.ino | #include "DFRobotLCDShield.h"
#include "DisplayManager.h"
#include <LiquidCrystal.h>
#include <Dhcp.h>
#include <Dns.h>
#include <Ethernet.h>
#include <EthernetClient.h>
#include <EthernetServer.h>
#include <EthernetUdp.h>
byte mac[] = {
0x00, 0xAB, 0xBA, 0xC1, 0xDD, 0x03
};
IPAddress receiverAddress;
LiquidCrysta... | #include "DFRobotLCDShield.h"
#include "DisplayManager.h"
#include <LiquidCrystal.h>
#include <Dhcp.h>
#include <Dns.h>
#include <Ethernet.h>
#include <EthernetClient.h>
#include <EthernetServer.h>
#include <EthernetUdp.h>
byte mac[] = {
0x00, 0xAB, 0xBA, 0xC1, 0xDD, 0x03
};
IPAddress receiverAddress;
LiquidCrysta... | Increment logic nearly complete. | Increment logic nearly complete.
| Arduino | mit | tillig/MarantzVolumeMonitor,tillig/MarantzVolumeMonitor |
c13159023448083b1f6f84b88eeb288b1c9f8d90 | html/examples/chibitronics/neopixel/neopixel.ino | html/examples/chibitronics/neopixel/neopixel.ino | #include "Adafruit_NeoPixel.h"
// Parameter 1 = number of pixels in strip
// Parameter 2 = Arduino pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixel... | #include "Adafruit_NeoPixel.h"
// Parameter 1 = number of pixels in strip
// Parameter 2 = Arduino pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixel... | remove float debugging calls | neopixel: remove float debugging calls
This was an experiment to see if we can call float code. We can.
Signed-off-by: Sean Cross <d7e19930cc1f42c2d0781f4d9e6f1fe5891bf9cf@xobs.io>
| Arduino | mit | chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer,chibitronics/ltc-webview-layer |
72b334e642c15730a325df79af660c2ccb3ed9a0 | src/piggy_back_loggers/SD_prototype_Firmware/Firmware/Firmware.ino | src/piggy_back_loggers/SD_prototype_Firmware/Firmware/Firmware.ino | // Firmware for the CIWS Residential Datalogger
// Arduino IDE ver. 1.8.7
// Utah Water Research Lab
// Updated: 10/25/2018
// Daniel Henshaw and Josh Tracy
// Note: F("String") keeps string literals in program memory and out of RAM. Saves RAM space. Very good. Don't remove the F. I know it looks funny. But don't do it... | // Firmware for the CIWS Residential Datalogger
// Arduino IDE ver. 1.8.7
// Utah Water Research Lab
// Updated: 10/25/2018
// Daniel Henshaw and Josh Tracy
// Note: F("String") keeps string literals in program memory and out of RAM. Saves RAM space. Very good. Don't remove the F. I know it looks funny. But don't do it... | Update Firmware.ino | Update Firmware.ino | Arduino | bsd-3-clause | UCHIC/WaterMonitor |
a04e31149161f35025d44f37bda2733c3c913111 | sw-machine-control/platform/src/Sortic150.ino | sw-machine-control/platform/src/Sortic150.ino | #define ARDUINOJSON_ENABLE_PROGMEM 0 // Arduino Bug https://arduinojson.org/faq/esp32/?utm_source=github&utm_medium=issues
#include <Arduino.h>
#include <NewPing.h>
#include <MFRC522.h>
#include <ChassisDigital.h>
#include <HandlingUnit.h>
#include <HandlingUnitSerial.h>
#include <MachineLogic.h>
#include <Component.h>... | #define ARDUINOJSON_ENABLE_PROGMEM 0 // Arduino Bug https://arduinojson.org/faq/esp32/?utm_source=github&utm_medium=issues
#include <Arduino.h>
#include <NewPing.h>
#include <MFRC522.h>
#include <ChassisDigital.h>
// #include <HandlingUnit.h>
#include <HandlingUnitSerial.h>
#include <MachineLogic.h>
#include <Component... | Use HandlingUnitSerial | Use HandlingUnitSerial
| Arduino | mit | HSRLCLab/sortic150,HSRLCLab/sortic150 |
4649df237d81b79b43ac06cc382cef5e0b3eca98 | examples/AlarmInterrupt/AlarmInterrupt.ino | examples/AlarmInterrupt/AlarmInterrupt.ino | /*
AlarmInterrupt.ino
Jacob Nuernberg
08/22
Example on using interrupts with DS3231 alarms.
Connect DS3231 SQW pin to Arduino interrupt pin 2
Tested on:
- Arduino UNO
- Arduino nano
*/
#include <DS3231.h>
#include <Wire.h>
// myRTC interrupt pin
#define CLINT 2
// Setup clock
DS3231 myRTC;
// Interrupt signalin... | /*
AlarmInterrupt.ino
Jacob Nuernberg
08/22
Example on using interrupts with DS3231 alarms.
Hardware setup:
Connect DS3231 SQW pin to Arduino interrupt pin 2
Tested on:
- Arduino UNO
- Arduino nano
Added to this example:
1. Descriptively named variables to pass parameter values.
2. Modify AlarmBits for Alarm 1 ... | add code features, clarify AlarmBits | add code features, clarify AlarmBits
| Arduino | unlicense | NorthernWidget/DS3231,NorthernWidget/DS3231 |
c1cdc7ca3efa02f70fffcb53a16a26823f31f43d | esp8266_160220_BYOP.ino | esp8266_160220_BYOP.ino |
/*
* This program is used for a message station shown at
* https://hackaday.io/project/9526-bring-your-own-pizero-byop
*/
/*
* - fix bug > proc_get() > mistake in secret message display on LCD
* v0.22 2016 Feb. 26
* - hide secret message (do not show on LCD)
* + update proc_get()
* + msgStorageLib: a... |
/*
* This program is used for a message station shown at
* https://hackaday.io/project/9526-bring-your-own-pizero-byop
*/
/*
* - update proc_get() > add 3rd parameter [isSecret(0|1)] (ref. protocol v0.7)
* - fix bug > proc_get() > mistake in secret message display on LCD
* v0.22 2016 Feb. 26
* - hide secre... | update proc_get() > add 3rd parameter [isSecret(0|1)] (ref. protocol v0.7) | update proc_get() > add 3rd parameter [isSecret(0|1)] (ref. protocol v0.7)
| Arduino | mit | yasokada/esp8266_160220_BYOP |
f5ceb968afab77c514a1cce0bfeedb80c898ae55 | sketch/sketch.ino | sketch/sketch.ino | /* サーボのヘッダファイルを準備 */
#include <Servo.h>
/* サーボモータの制御クラス */
class ServoIO{
Servo servo; /* サーボのピン */
/* サーボモータが可動範囲外に回転するのを防ぐ関数*/
int angleCalc(const int currentAngle, const int difference){
const int sum = currentAngle + difference;
if(sum < 5){return 0;} /* 5度以下なら0度を返す */
if(sum > 175){return... | /* サーボのヘッダファイルを準備 */
#include <Servo.h>
/* サーボモータの制御クラス */
class ServoIO{
Servo servo; /* サーボのピン */
/* サーボモータが可動範囲外に回転するのを防ぐ関数*/
int angleCalc(const int currentAngle, const int difference){
const int sum = currentAngle + difference;
if(sum < 5){return 0;} /* 5度以下なら0度を返す */
if(sum > 175){return... | Rename functions | Rename functions
| Arduino | mit | eliza0x/Suno |
78b67f6b270efcab079e3d93d8a68f10fa94a904 | code/lissajous/lissajous.ino | code/lissajous/lissajous.ino | // This is based on Sweep
// by BARRAGAN <http://barraganstudio.com>
#include <Servo.h>
// Create the servo objects
Servo servox;
Servo servoy;
double pos = 0; // Position incrementer
float spd = 0.005; // This value seems to work for reasonable speed.
float facter = 1.0; // Ratio between servox and servoy perio... | // This is based on Sweep
// by BARRAGAN <http://barraganstudio.com>
#include <Servo.h>
// Create the servo objects
Servo servox;
Servo servoy;
double pos = 0; // Position incrementer
float spd = 0.005; // This value seems to work for reasonable speed.
float facter = 1.0; // Ratio between servox and servoy perio... | Scale up the image to max servo range | Scale up the image to max servo range
| Arduino | mit | jbeyers/lissajous,jbeyers/lissajous,jbeyers/lissajous |
fcd2f246f8796ba643d2c6e3a045084420085014 | SensorBoard.ino | SensorBoard.ino | #include <SPI.h>
#include "nRF24L01.h"
#include "RF24.h"
RF24 radio(9,10);
const uint64_t pipes[2] = { 0xF0F0F0F001LL, 0xF0F0F0F002LL };
const byte shortAddr = 0x02;
int led = 13;
void setup(void)
{
Serial.begin(57600);
radio.begin();
radio.setAutoAck(false);
radio.setRetries(15,15);
radio.setPALevel(RF24_... | #include <SPI.h>
#include "nRF24L01.h"
#include "RF24.h"
RF24 radio(9,10);
const uint64_t pipes[2] = { 0xF0F0F0F001LL, 0xF0F0F0F002LL };
const byte shortAddr = 0x02;
int led = 13;
char switchStatus = 0;
char lampStatus = 0;
void setup(void)
{
Serial.begin(57600);
radio.begin();
radio.setAutoAck(false);
radio... | Add sensorboard switch control variable and functions | Add sensorboard switch control variable and functions
| Arduino | apache-2.0 | Ertinfagor/RCHome,Ertinfagor/RCHome,Ertinfagor/RCHome |
19598439e1785f50c3fbd7588b2b7ab8996db945 | time.ino | time.ino | #include "time.h"
static unsigned long previous_millis = 0;
static uint32_t sync_interval = 300;
static uint32_t next_sync_threshold = 0;
static request_time_function_t time_requester = NULL;
void split_timestamp(time_t time, struct time_data * data){
data->second = time % SECS_PER_MIN;
time /= SECS_PER_MIN;... | #include "time.h"
static unsigned long previous_millis = 0;
static uint32_t sync_interval = 300;
static uint32_t next_sync_threshold = 0;
static request_time_function_t time_requester = NULL;
void split_timestamp(time_t time, struct time_data * data){
data->second = time % SECS_PER_MIN;
time /= SECS_PER_MIN;... | Handle millis() wraparound | Handle millis() wraparound
| Arduino | mit | xim/tsoc,xim/tsoc,xim/tsoc,xim/tsoc |
ad4456859e7f938b861c9a5249efd4e778b1a5eb | sonar.ino | sonar.ino | /* Basicamente este es un programa Arduino que se ejecuta cuando recibe por el puerto serie //
// la letra p (de prendido quizas?), se fija si hay un objeto en la distacina especificada //
// y si esta espera a que alguien lo saque, para mandar la señal R (de reproducir?) por el //
// puerto serie. Si no hay nada ade... | /* Basicamente este es un programa Arduino que se ejecuta cuando recibe por el puerto serie //
// la letra p (de prendido quizas?), se fija si hay un objeto en la distacina especificada //
// y si esta espera a que alguien lo saque, para mandar la señal R (de reproducir?) por el //
// puerto serie. Si no hay nada ade... | Update sonar.ino | Update sonar.ino
Agregado boton de test | Arduino | agpl-3.0 | seba-wetzel/Video-wall |
55db233bedf8b59901fd0828da17400c40a495e9 | laserharp.ino | laserharp.ino | #ifdef GINSING
#include <GinSing.h>
#include <GinSingDefs.h>
#include <GinSingMaster.h>
#include <GinSingPoly.h>
#include <GinSingPreset.h>
#include <GinSingSerial.h>
#include <GinSingSerialMacros.h>
#include <GinSingSynth.h>
#include <GinSingVoice.h>
#include <Wire.h>
#include <GinSing.h>
#endif
#include <Adafruit_M... | #ifdef GINSING
#include <GinSing.h>
#include <GinSingDefs.h>
#include <GinSingMaster.h>
#include <GinSingPoly.h>
#include <GinSingPreset.h>
#include <GinSingSerial.h>
#include <GinSingSerialMacros.h>
#include <GinSingSynth.h>
#include <GinSingVoice.h>
#include <Wire.h>
#include <GinSing.h>
#endif
#include <Adafruit_M... | Adjust motor via serial if there are no buttons, and a lot of formatting (sorry) | Adjust motor via serial if there are no buttons, and a lot of formatting (sorry)
| Arduino | apache-2.0 | benroy/laserharp,benroy/laserharp |
1092ad23efdcbab0e77031c95707b632608f6dc3 | SRC/ArincShieldAutoTest.ino | SRC/ArincShieldAutoTest.ino | //
// Arinc Shield Test.ino
// V1.01 (15/03/2017) : ACLK divider is a parameter, to cope with both units:
// - 12MHz (prototypes) or
// - 16MHz (serial production)
//
#include <SPI.h>
// pin numbers
#define SS 10 // SPI Slave Select
#define OE 9 // Output Enable of voltage translator (TXB0104)
#defin... | //
// Arinc Shield Test.ino
//
// author: JPP
//
// Version V1.01 (15/03/2017) : ACLK divider is a parameter, to cope with both units:
// - 12MHz (prototypes) or
// - 16MHz (serial production)
//
// This program is distributed in the hope that it will be useful, but without any
// warranty; without even t... | Update ArincShieldAutoTest.ino | Update ArincShieldAutoTest.ino | Arduino | apache-2.0 | Art-ut-Kia/NAV-429-tester |
d633522e3363a77a012181cc1f5dc35f7431905a | plane/TRANSMITTER/sketch_aug08a/sketch_aug08a.ino | plane/TRANSMITTER/sketch_aug08a/sketch_aug08a.ino | /*
* Arduino Wireless Communication Tutorial
* Example 2 - Transmitter Code
*
* by Dejan Nedelkovski, www.HowToMechatronics.com
*
* Library: TMRh20/RF24, https://github.com/tmrh20/RF24/
*/
#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>
#define led 12
RF24 radio(7, 8); // CNS, ... | /*
* Arduino Wireless Communication Tutorial
* Example 2 - Transmitter Code
*
* by Dejan Nedelkovski, www.HowToMechatronics.com
*
* Library: TMRh20/RF24, https://github.com/tmrh20/RF24/
*/
int value = 0; // set values you need to zero
#include <SPI.h>
#include <nRF24L01.h>
#include <RF24... | Update sketch_aug08a.ino | Update sketch_aug08a.ino | Arduino | apache-2.0 | mohamedalichelbi/Arduino-Plane |
828f97692b9ac2e62ee19476fb25a0e03c9f069f | moros/moros.ino | moros/moros.ino | #include <SPI.h>
#include <TFT.h>
#define NONE -1
#define DISPLAY_FONT_SIZE 7
#define CHAR_HEIGHT_PX DISPLAY_FONT_SIZE * 10
#define CHAR_WIDTH_PX 42
#define DISPLAY_WIDTH_CHAR 4
//#define INITIAL_TIME_MS 300000
#define INITIAL_TIME_MS 5000
int active_player = NONE;
volatile int button_pressed = NONE;
inline void ... | #include <SPI.h>
#include <TFT.h>
#define NONE -1
#define DISPLAY_FONT_SIZE 7
#define CHAR_HEIGHT_PX DISPLAY_FONT_SIZE * 10
#define CHAR_WIDTH_PX 42
#define DISPLAY_WIDTH_CHAR 4
//#define INITIAL_TIME_MS 300000
#define INITIAL_TIME_MS 5000
int active_player = NONE;
volatile int button_pressed = NONE;
inline void ... | Use C99 initializers all around | Use C99 initializers all around
| Arduino | mit | adamf/Moros,adamf/Moros,adamf/Moros,adamf/Moros |
6131c2d38ae9a9efe61d2240e64653bbc7f6b371 | examples/Basic/Basic.ino | examples/Basic/Basic.ino | #include <WiFiManager.h> // https://github.com/tzapu/WiFiManager
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
//WiFiManager, Local intialization. Once its business is done, there is no need to keep it around
WiFiManager wm;
//reset settings - wipe credentials... | #include <WiFiManager.h> // https://github.com/tzapu/WiFiManager
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
// WiFi.mode(WiFi_STA); // it is a good practice to make sure your code sets wifi mode how you want it.
//WiFiManager, Local intialization. Once its busi... | update basic.ino | update basic.ino
| Arduino | mit | tzapu/WiFiManager,tzapu/WiFiManager,tzapu/WiFiManager,tzapu/WiFiManager,tzapu/WiFiManager |
35a3424df9319f6c62c19480c19cf79d48e69d2c | sketches/test_midi/test_midi.ino | sketches/test_midi/test_midi.ino | /*
Test pseudo-MIDI commands from a 3x2 key matrix.
Turns on a LED when at least one key is pressed.
The circuit:
* LED built in to pin 13, connected to ground
* Key matrix: C, C#, and D from two keyboards
* C into digital pin 8
* C# into digital pin 9
* D into digital pin 10
* Internal pull-up resis... | /*
Test pseudo-MIDI commands from a 3x2 key matrix.
Turns on a LED when at least one key is pressed.
The circuit:
* OrganDuino PCB shield, populated with diodes
* First two octaves (24 keys) soldered in
* Rank 0 jumper bridged on reverse side
created 2016 by @JDWarner
*/
#define keyON 127
#define keyOFF 0
/... | Fix test MIDI sketch with proper setup and docs. | Fix test MIDI sketch with proper setup and docs.
| Arduino | apache-2.0 | JDWarner/organduino |
21ca0d1928b1b19a61628e1b3a982b006df08739 | Photon/Controllers/FrontPanel/src/FrontPanel.ino | Photon/Controllers/FrontPanel/src/FrontPanel.ino | /**
FrontPanel Controller
Description: This sketch controls all the switches in the Cyclone 4005 front control panel.
Author: Ron Lisle
Date: 9/16/17
This isn't the bridge controller, so we shouldn't receive any activities from particle.io
To update Photon:
1. Edit this code
2. "particle flash Fr... | /**
FrontPanel Controller
Description: This sketch controls all the switches in the Cyclone 4005 front control panel.
Author: Ron Lisle
Date: 9/16/17
This isn't the bridge controller, so we shouldn't receive any activities from particle.io
To update Photon:
1. Edit this code
2. "particle flash Fr... | Enable LED boards | Enable LED boards
| Arduino | mit | rlisle/ParticleIoT,rlisle/ParticleIoT,rlisle/Patriot,rlisle/Patriot,rlisle/ParticleIoT,rlisle/Patriot,rlisle/Patriot |
4f32e02b93abada2d39b8bc44e3adb15c64828a5 | arduino/blinkytape_orb.ino | arduino/blinkytape_orb.ino | #include "FastLED.h"
// hardware
#define NUM_LEDS 12
#define DATA_PIN 3
// visuals
#define PULSE_MAX_VAL 255
#define PULSE_MIN_VAL 160
#define PULSE_DURATION_SLOW 3000
#define PULSE_DURATION_MED 1500
#define PULSE_DURATION_FAST 0
#define CHANGE_MIN_VAL 64
#define CHANGE_DURATION 800
// state
CRGB leds[NUM_LEDS];
u... | #include "FastLED.h"
// hardware
#define NUM_LEDS 12
#define LED_CORRECTION TypicalSMD5050
#define DATA_PIN 3
// visuals
#define PULSE_MAX_VAL 255
#define PULSE_MIN_VAL 160
#define PULSE_DURATION_SLOW 3000
#define PULSE_DURATION_MED 1500
#define PULSE_DURATION_FAST 0
#define CHANGE_MIN_VAL 64
#define CHANGE_DURATIO... | Set LED correction | Set LED correction
Orange and yellow look a lot better
| Arduino | mit | jtai/blinkytape-orb,jtai/blinkytape-orb |
5723299d43e45f46e6a4acc371e04e02f696be09 | esp8266_160220_BYOP.ino | esp8266_160220_BYOP.ino |
/*
* This program is used for a message station shown at
* https://hackaday.io/project/9526-bring-your-own-pizero-byop
*/
/*
* - update proc_clear() to call MsgServer_Clear()
* - add [kAuthorizationCode], which is used to protect to clear all the messages
* v0.23 2016 Feb. 27
* - add [CMD_ALL_CLEAR] in Ser... |
/*
* This program is used for a message station shown at
* https://hackaday.io/project/9526-bring-your-own-pizero-byop
*/
/*
* v0.24 2016 Feb. 27
* - update proc_clear() to call MsgServer_Clear()
* - add [kAuthorizationCode], which is used to protect to clear all the messages
* v0.23 2016 Feb. 27
* - add ... | update version comment | update version comment
| Arduino | mit | yasokada/esp8266_160220_BYOP |
aa32a6554a61d848098dde507728481607225b13 | example/mpxv6115v.ino | example/mpxv6115v.ino | #include "MPXV6115V.h"
#include "DRV8833.h"
#include "Arduino.h"
#include "EEPROM.h"
#include "MAX7219.h"
const int vacuum=A0;
const int temp=A1;
const int batt=A2;
const int up=2;
const int down=4;
float vakum;
int setting=250;
int tolerance=25;
void setup()
{
pinMode(up,INPUT);
pinMode(down,INPUT);
... | #include "MPXV6115V.h"
#include "DRV8833.h"
#include "Arduino.h"
#include "EEPROM.h"
#include "MAX7219.h"
LedControl lc=LedControl(12,11,10,4);
DRV8833 driver=DRV8833(); //DRV8833 sınıfı bir nesne olarak tanımlandırıldı
MPXV6115V mpxv6115v(A0);
const int vacuum=A0; //vakum
const int temp=A1;
const int bat... | Update mpxv6115v.ino | Update mpxv6115v.ino | Arduino | apache-2.0 | tunataskintuna35/MPXV6115Vacuum |
a4c9a7ffca3f2e32857aa3f9e824b6a9b6748409 | document/arduino/motor_control/motor_control.ino | document/arduino/motor_control/motor_control.ino | /*
Copyright 2017 ADLINK Technology Inc.
Developer: Chester, Tseng (for pySerial & encoder)
HaoChih, LIN (for controller)
Email: chester.tseng@adlinktech.com
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy ... | /*
Copyright 2017 ADLINK Technology Inc.
Developer: Chester, Tseng (for pySerial & encoder)
HaoChih, LIN (for controller)
Email: chester.tseng@adlinktech.com
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy ... | improve controller | improve controller
| Arduino | apache-2.0 | Adlink-ROS/adlink_ddsbot,Adlink-ROS/adlink_ddsbot |
fa6024241bdd2485cadb00e95a25afd004a56e07 | computer_box/computer_box.ino | computer_box/computer_box.ino | #include <stdlib.h>
#include <OneWire.h>
#include <DHT.h>
#define DHTPIN 3 // DHT Temp & Humidity Pin
#define DHTTYPE DHT22 // DHT 22 (AM2302)
int ac_probe = 0;
int dc_probe = 1;
int led_pin = 13;
int led_value = LOW;
int fan_pin = 4;
int ds18_01_pin = 2;
const int num_ds18 = 3; // Number of DS18B20 Sensors
ui... | #include <stdlib.h>
#include <OneWire.h>
#include <DHT.h>
#define DHTPIN 3 // DHT Temp & Humidity Pin
#define DHTTYPE DHT22 // DHT 22 (AM2302)
int ac_probe = 0;
int dc_probe = 1;
int led_pin = 13;
int led_value = LOW;
int fan_pin = 4;
int ds18_01_pin = 2;
const int num_ds18 = 3; // Number of DS18B20 Sensors
ui... | Use millis() instead of counter | Use millis() instead of counter
| Arduino | mit | panoptes/POCS,AstroHuntsman/POCS,panoptes/PACE,panoptes/POCS,AstroHuntsman/POCS,panoptes/POCS,panoptes/POCS,AstroHuntsman/POCS,AstroHuntsman/POCS |
db3f91835e0221bf4bd8282fb043e15c926f4d8a | _70-homekit-accessories-light/_70-homekit-accessories-light.ino | _70-homekit-accessories-light/_70-homekit-accessories-light.ino | // Using Sonoff wifi switch, 80MHz, 1M
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include <WiFiClientSecure.h>
#include <PubSubClient.h>
#include <ArduinoJson.h>
#include <Ticker.h>
#include "/usr/local/src/aptls_setting.h"
extern "C" {
#include "user_interface.h"
}... | // Using Sonoff wifi switch, 80MHz, 1M
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include <WiFiClientSecure.h>
#include <PubSubClient.h>
#include <ArduinoJson.h>
#include <Ticker.h>
#include "/usr/local/src/aptls_setting.h"
extern "C" {
#include "user_interface.h"
}... | remove serial.print | remove serial.print
| Arduino | lgpl-2.1 | chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino,chaeplin/esp8266_and_arduino |
7ba742e0346c48aad95c995f35890336cfcaad4c | examples/Drivers/CosaTSOP4838/CosaTSOP4838.ino | examples/Drivers/CosaTSOP4838/CosaTSOP4838.ino | /**
* @file CosaTSOP4838.ino
* @version 1.0
*
* @section License
* Copyright (C) 2013, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the... | /**
* @file CosaTSOP4838.ino
* @version 1.0
*
* @section License
* Copyright (C) 2013, Mikael Patel
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the... | Update after changing of visibility. Should use IR::Receiver::reset. | Update after changing of visibility. Should use IR::Receiver::reset.
| Arduino | lgpl-2.1 | dansut/Cosa,rrobinet/Cosa,jeditekunum/Cosa,dansut/Cosa,dansut/Cosa,jeditekunum/Cosa,kc9jud/Cosa,rrobinet/Cosa,kc9jud/Cosa,kc9jud/Cosa,mikaelpatel/Cosa,dansut/Cosa,mikaelpatel/Cosa,rrobinet/Cosa,jeditekunum/Cosa,SinishaDjukic/Meshwork,mikaelpatel/Cosa,SinishaDjukic/Meshwork,SinishaDjukic/Meshwork,mikaelpatel/Cosa,Sinish... |
92204f3f1806401de10a5cd5bf037a666f0c2fc0 | oled.ino | oled.ino |
void updateOLEDbar() {
int barWidth = DISPLAY_WIDTH / numberOfChannels;
OLED.clear();
for ( byte thisChannel = 0; thisChannel < numberOfChannels; thisChannel++ ) {
int x1 = barWidth * thisChannel;
int bottomOfBar = DISPLAY_HEIGHT - 11;
int y1 = ( bottomOfBar ) - ( bottomOfBar * ( channel[thisChannel... |
time_t nextOLEDswitch = now() + 5; //switch between showing IP or hostname every 5 seconds
bool showIP = true;
void updateOLEDbar() {
int barWidth = DISPLAY_WIDTH / numberOfChannels;
OLED.clear();
for ( byte thisChannel = 0; thisChannel < numberOfChannels; thisChannel++ ) {
int x1 = barWi... | Refactor OLED code. | Refactor OLED code.
| Arduino | mit | CelliesProjects/aquacontrol2,CelliesProjects/aquacontrol2 |
db703c3cc6650fec1b9672e055efa4c82a848c1c | short-circuit-limiter/short-circuit-limiter.ino | short-circuit-limiter/short-circuit-limiter.ino | #include <U8g2lib.h>
#include "CTSensor.h"
#define CURRENT_ENABLE_THRESHOLD 0.2
#define CURRENT_MCB_CUT 20
#define PIN_LED 26
#define PIN_CT A0
#define PIN_BUTTON_ENTER 24
#define PIN_TEMP A11
#define PIN_RELAY_MCB 5
#define PIN_RELAY_LIMITER 7
#define CT_CALIBRATION_VALUE 60.6 // (100A / 0.05A) / 33 ohms
#define ... | #include <U8g2lib.h>
#include "CTSensor.h"
#define CURRENT_ENABLE_THRESHOLD 0.2
#define CURRENT_MCB_CUT 16
#define PIN_LED 26
#define PIN_CT A0
#define PIN_BUTTON_ENTER 24
#define PIN_TEMP A11
#define PIN_RELAY_MCB 5
#define PIN_RELAY_LIMITER 7
#define CT_CALIBRATION_VALUE 60.6 // (100A / 0.05A) / 33 ohms
#define ... | print mob tripped current | print mob tripped current
| Arduino | mit | yeokm1/repair-kopitiam-training-and-equipment,yeokm1/repair-kopitiam-training-and-equipment |
397664c3638ed5156d5258f3acf3898a97e561eb | volvo_hid.ino | volvo_hid.ino | //Lbus = LIN BUS from Car
//Vss = Ground
//Vbb = +12V
// MCP2004 LIN bus frame:
// ZERO_BYTE SYN_BYTE ID_BYTE DATA_BYTES.. CHECKSUM_BYTE
#include "Mouse.h"
#include "Keyboard.h"
// https://github.com/zapta/linbus/tree/master/analyzer/arduino
#include "lin_frame.h"
#define CS_PIN 15
#define RX_LED 17
#define HEARTB... | //Lbus = LIN BUS from Car
//Vss = Ground
//Vbb = +12V
// MCP2004 LIN bus frame:
// ZERO_BYTE SYN_BYTE ID_BYTE DATA_BYTES.. CHECKSUM_BYTE
#include "Mouse.h"
#include "Keyboard.h"
// https://github.com/zapta/linbus/tree/master/analyzer/arduino
#include "lin_frame.h"
#define CS_PIN 15
#define RX_LED 17
#define HEARTB... | Rename key timeout to click timeout | Rename key timeout to click timeout
| Arduino | mit | laurynas/volvo_hid |
1328ee915f9b66ca46d63a501e7b4dda7d80e7b2 | sketch/sketch.ino | sketch/sketch.ino | /* サーボのヘッダファイルを準備 */
#include <Servo.h>
/* サーボモータの制御クラス */
class ServoIO{ //{{{
Servo servo; /* サーボのピン */
/* サーボモータが可動範囲外に回転するのを防ぐ関数*/
int angleCalc(const int currentAngle, const int difference){
const int sum = currentAngle + difference;
if(sum < 5){return 0;} /* 5度以下なら0度を返す */
if(sum > 175){... | /* サーボのヘッダファイルを準備 */
#include <Servo.h>
/* サーボモータの制御クラス */
class ServoIO{ //{{{
Servo servo; /* サーボのピン */
/* サーボモータが可動範囲外に回転するのを防ぐ関数*/
int angleCalc(const int currentAngle, const int difference){
const int sum = currentAngle + difference;
if(sum < 5){return 0;} /* 5度以下なら0度を返す */
if(sum > 175){... | Improve sketch.ino: refactoring for better OOP | Improve sketch.ino: refactoring for better OOP
| Arduino | mit | eliza0x/Suno |
71c5760b05585bc3758f480f3d31eced33c540f5 | Vertex.ino | Vertex.ino | #include <Servo.h>
#include <Wire.h>
#include <PID_v1.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_LSM303_U.h>
#include <Adafruit_BMP085_U.h>
#include <Adafruit_L3GD20_U.h>
#include <Adafruit_10DOF.h>
Servo ESC1;
Servo ESC2;
Servo ESC3;
Servo ESC4;
/*
Motor setup
4 1
\ /
\___/
/ \
/ \... | #include <Servo.h>
#include <Wire.h>
#include <PID_v1.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_LSM303_U.h>
#include <Adafruit_BMP085_U.h>
#include <Adafruit_L3GD20_U.h>
#include <Adafruit_10DOF.h>
Servo ESC1;
Servo ESC2;
Servo ESC3;
Servo ESC4;
/*
Motor setup
4 1
\ /
\___/
/ \
/ \... | Make sensor error a struct rather than an array | Make sensor error a struct rather than an array
| Arduino | mit | petschekr/Vertex,petschekr/Vertex |
8ef664019b378548860078402d9fbb60170a058c | CoreIR.ino | CoreIR.ino | /*
*
*/
#include <IRremote.h>
IRsend irsend;
int khz = 15; // 38kHz carrier frequency for the NEC protocol
unsigned int rawData[33] = {20, 25, 45, 25, 85, 25, 20, 25, 45, 20, 90, 25, 45, 45, 25, 45, 25, 45, 25, 65, 45, 95, 95, 25, 20, 25, 20, 55, 45, 45, 45, 20, 20};
void setup()
{
pinMode(13, OUTPUT);
d... | /*
*
*/
#include <IRremote.h>
IRsend irsend;
int khz = 15; // 38kHz carrier frequency for the NEC protocol
//6491857 unsigned int rawData[33] = {22, 22, 48, 22, 88, 22, 22, 22, 48, 22, 88, 22, 48, 48, 22, 48, 22, 48, 22, 68, 48, 93, 93, 22, 22, 22, 22, 53, 48, 48, 48, 22, 22};
unsigned int rawData[35] = {22,... | add a second transponder | add a second transponder
| Arduino | mit | slacker87/CoreIR,slacker87/CoreIR |
00fec9947170ce0f4a5289c1cfd27b52675ab656 | arduino/arduino_md03_v_5_0/arduino_md03_v_5_0.ino | arduino/arduino_md03_v_5_0/arduino_md03_v_5_0.ino | /***************************************************
ArcEyes MD03 I2C sandbox
****************************************************/
/*
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
//int LCD pins on I2C bus
#define I2C_ADDR 0x27
#define BACKLIGHT_PIN 3
#define En_pin 2
#define Rw_... | /***************************************************
ArcEyes USB Serial
****************************************************/
/*
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
//int LCD pins on I2C bus
#define I2C_ADDR 0x27
#define BACKLIGHT_PIN 3
#define En_pin 2
#define Rw_p... | Update arduino_md03_v_5_0.ino | Update arduino_md03_v_5_0.ino
Changed headder | Arduino | apache-2.0 | Pitchless/arceye,Pitchless/arceye |
bd09c6435b1597d1f6d362c2880d2ea3c238d6b4 | examples/PatternPlayer/PatternPlayer.ino | examples/PatternPlayer/PatternPlayer.ino | #include <FastLED.h>
#include <avr/pgmspace.h>
#include <Animation.h>
#include "animation.h"
#define LED_COUNT 60
struct CRGB leds[LED_COUNT];
#define LED_OUT 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define IO_A 7
#define IO_B 11
#define BRIGHT_STEP_COUNT 5
uint8_t brightnesSteps[BRI... | #include <FastLED.h>
//#include <avr/pgmspace.h>
#include <Animation.h>
#include "animation.h"
#define LED_COUNT 60
struct CRGB leds[LED_COUNT];
#define LED_OUT 13
#define BUTTON_IN 10
#define ANALOG_INPUT A9
#define IO_A 7
#define IO_B 11
#define BRIGHT_STEP_COUNT 5
uint8_t brightnesSteps[... | Update pattern player example | Update pattern player example
| Arduino | mit | Blinkinlabs/BlinkyTape_Arduino |
b4289797a19a95e9936c4fa336229139af8c7338 | capteurQ/capteurQ.ino | capteurQ/capteurQ.ino |
/*
capteurQ
Copyright (c) 2017 IOT-4DL
Licensed under the MIT license.
*/
/*
* HC-05 will be paired with default PIN : 1234
*/
#include "DHT.h"
#include "DigitalPin.h"
// use software serial port to communicate with bluetooth module hc-05
#include "SoftwareSerial.h"
//#include <DHT.h> ... |
/*
capteurQ
Copyright (c) 2017 IOT-4DL
Licensed under the MIT license.
*/
/*
* HC-05 will be paired with default PIN : 1234
*/
#include "DHT.h"
#include "DigitalPin.h"
// use software serial port to communicate with bluetooth module hc-05
#include "SoftwareSerial.h"
//#include <DHT.h> ... | correct issue on rx/tx number pin | correct issue on rx/tx number pin
| Arduino | mit | IOT-4DL/capteurQ |
93ade3213adb51b366b01e9eaa8df93712b8100e | timer/timer.ino | timer/timer.ino |
// #include "toneAC.h"
#include "Constants.h"
#include "Display.h"
#include "Pulser.h"
#include "Speaker.h"
#include "Buttons.h"
#include "Countdown.h"
#include "Shutdown.h"
Display display;
Pulser pulser;
Speaker speaker;
Buttons buttons;
Countdown countdown;
Shutdown shutdown;
#define STATE_WAITING 1
#define ST... |
// #include "toneAC.h"
#include "Constants.h"
#include "Display.h"
#include "Pulser.h"
#include "Speaker.h"
#include "Buttons.h"
#include "Countdown.h"
#include "Shutdown.h"
Display display;
Pulser pulser;
Speaker speaker;
Buttons buttons;
Countdown countdown;
Shutdown shutdown;
#define STATE_WAITING 1
#define ST... | Fix so that restart button restarts countdown when in beeping state | Fix so that restart button restarts countdown when in beeping state
| Arduino | agpl-3.0 | OmniRose/watch-timer,OmniRose/watch-timer |
fb51ae3d26217221e2914712d86f2f0c17e1ce05 | Arduino/noise_multiplier/noise_multiplier.ino | Arduino/noise_multiplier/noise_multiplier.ino | #include "AES.h"
#define CHAIN_SIZE 2
#define BLOCK_SIZE 16
#define SAMPLE_SIZE BLOCK_SIZE * CHAIN_SIZE
AES128 aes128;
byte key[16] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F};
byte sourcePool[SAMPLE_SIZE];
void setup()
{
// Defining PB1 ... | #include "AES.h"
#include "CBC.h"
#define CHAIN_SIZE 2
#define BLOCK_SIZE 16
#define SAMPLE_SIZE (BLOCK_SIZE * CHAIN_SIZE)
byte key[16] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F};
CBC<AES128> cbc;
byte sourcePool[SAMPLE_SIZE];
void setup... | Add conditioning implementation | Add conditioning implementation
| Arduino | mit | robseward/Ziffer |
afe4845d33d820638dab3ba298d7dd21acb95e30 | ScoutWeatherStation/scout_weather_station.ino | ScoutWeatherStation/scout_weather_station.ino | #define USE_ESP 1
#undef USE_ARDUINO
#ifdef USE_ARDUINO
#include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>
#endif
#ifdef USE_ESP
#include <ESP8266WiFi.h>
#endif
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>
#include <Adafruit_BME280.h>
#include <Adaf... | #define USE_ESP 1
#undef USE_ARDUINO
#ifdef USE_ARDUINO
#include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>
#endif
#ifdef USE_ESP
#include <ESP8266WiFi.h>
#endif
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>
#include <Adafruit_BME280.h>
#include <Adaf... | make bme280 actually work | make bme280 actually work
| Arduino | mit | craighagan/hackprojects |
f91f6d3b506de67f54ad472d0d21391a2130b1d2 | WiFi_Profile_Grabber/WiFi_Profile_Grabber.ino | WiFi_Profile_Grabber/WiFi_Profile_Grabber.ino | //This DigiSpark script writes the wireless network credentials to a csv file in a usb mounted at d:\ - change accordingly.
//Credits to p0wc0w.
#include "DigiKeyboard.h"
void setup() {
}
void loop() {
DigiKeyboard.sendKeyStroke(0);
DigiKeyboard.delay(500);
DigiKeyboard.sendKeyStroke(KEY_R, MOD_GUI_LEFT);
Digi... | //This DigiSpark script writes the wireless network credentials to a csv file on a usb drive.
//Change "VolumeName='USB_DRIVE_LABEL'" to reflect your drive's label.
//Credits to p0wc0w.
#include "DigiKeyboard.h"
void setup() {
}
void loop() {
DigiKeyboard.sendKeyStroke(0);
DigiKeyboard.delay(500);
DigiKeyboard... | Update to Wifi_Profile_Grabber | Update to Wifi_Profile_Grabber
Altered the PS script to copy via drive label as opposed to hard coded drive letter. Also condensed some of the digi script into the PS script to further lessen the time exposed. | Arduino | mit | CedArctic/DigiSpark-Scripts,CedArctic/DigiSpark-Scripts |
2a70e6775c935727526285323028196eb7b21807 | sketches/WHID_and_Cactus_micro_rev2_sketches/Arduino_Sketch/Arduino_Sketch.ino | sketches/WHID_and_Cactus_micro_rev2_sketches/Arduino_Sketch/Arduino_Sketch.ino | /*
* WHID Injector - Arduino Sketch
* http://whid.ninja
* Forked by Luca Bongiorni
* Based on ESPloit by Corey Harding of www.LegacySecurityGroup.com
*/
/*
For individual keypresses or combinations of key presses send the following via software serial:
-"Press:X" or "Press:X+Y" or "Press:X+Y+Z" and so forth
--Expe... | /*
* ################################################
* #### DEPRECATED FW! Please use ESPloitV2!!! ####
* ################################################
* WHID Injector - Arduino Sketch
* http://whid.ninja
* Forked by Luca Bongiorni
* Based on ESPloit by Corey Harding of www.LegacySecurityGroup.com
*/
/*
For... | Update Arduino_Sketch.ino | Update Arduino_Sketch.ino | Arduino | mit | whid-injector/WHID,whid-injector/WHID,whid-injector/WHID |
cc74c2defacc3056965a6ed05942f3f5dca01558 | iGPS.ino | iGPS.ino | /*
* GPS解析
* 包括：
* 时间、日期、经纬度、海拔
*/
#include <SoftwareSerial.h>
#include "LCD4884.h"
#define GPS_TX 12
#define GPS_RX 13
#define GPRMC "$GPRMC" // 推荐最小定位信息
#define GPVTG "$GPVTG" // 地面速度信息
#define GPGGA "$GPGGA" // 获取海拔高度
#define GPZDA "$GPZDA" // UTC时间/日期及本地时区偏移量
#define VALID "A" // A=Valid 有效
#define INVALID "... | /*
* GPS解析
* 包括：
* 时间、日期、经纬度、海拔
*/
#include <SoftwareSerial.h>
#include "LCD4884.h"
#define GPS_TX 12
#define GPS_RX 13
#define GPRMC "$GPRMC" // 推荐最小定位信息
#define GPVTG "$GPVTG" // 地面速度信息
#define GPGGA "$GPGGA" // 获取海拔高度
#define GPZDA "$GPZDA" // UTC时间/日期及本地时区偏移量
#define VALID "A" // A=Valid 有效
#define INVALID "... | Update iGPS.ino | Update iGPS.ino
增加摇杆控制 | Arduino | apache-2.0 | snowolf-zlex/iGPS,snowolf-zlex/iGPS |
0e6c0f9e32af450cbb7e870dfd4c90f61a6252ac | boieng.ino | boieng.ino | #define JOE 1
#define MIKE !JOE
#include <Wire.h>
#include "prog.h"
const auto FORWARD = HIGH;
const auto BAKWARD = LOW;
void setup() {
set_wheel_pins();
begin_gyro();
Serial.begin(9600);
}
void wheel(int f, int b, float n) {
if (n < 0.0) {
analogWrite(f, 0);
analogWrite(b, n > -216 ? round(-n-40) ... | #define JOE 1
#define MIKE !JOE
#include <Wire.h>
#include "prog.h"
const auto FORWARD = HIGH;
const auto BAKWARD = LOW;
void setup() {
set_wheel_pins();
begin_gyro();
Serial.begin(9600);
}
void wheel(int f, int b, float n) {
if (n < 0.0) {
analogWrite(f, 0);
analogWrite(b, n > -216 ? round(-n-40) ... | Stop clearing multiple times | Stop clearing multiple times
| Arduino | mit | oeb25/boieng,oeb25/boieng,oeb25/boieng |
8a7cd08cc4cc0f85dcef960e89c3b8ac74603606 | buttonbar/buttonbar.ino | buttonbar/buttonbar.ino | // pinout
#define MUX_A 10
#define MUX_B 11
#define MUX_C 12
#define MUX_COM1 14
#define MUX_COM2 15
#define MUX_COM3 16
#define SWITCH_A_UP 2
#define SWITCH_A_DN 3
#define SWITCH_B_UP 0
#define SWITCH_B_DN 1
// number of buttons
#define BUTTON_COUNT 20
// MIDI params
#define MIDI_CHANNEL 1
// uncomment to enable seria... | // pinout
#define MUX_A 10
#define MUX_B 11
#define MUX_C 12
#define MUX_COM1 14
#define MUX_COM2 15
#define MUX_COM3 16
#define SWITCH_A_UP 2
#define SWITCH_A_DN 3
#define SWITCH_B_UP 0
#define SWITCH_B_DN 1
// number of buttons
#define BUTTON_COUNT 20
// MIDI params
#define MIDI_CHANNEL 1
// uncomment to enable seria... | Disable debugging. | Disable debugging.
| Arduino | unlicense | jessecrossen/hautmidi,jessecrossen/hautmidi,jessecrossen/hautmidi,jessecrossen/hautmidi |
3b069938a64ccfe703681132b5b4e5d752a49838 | ha_mqtt_sensor_dht22/ha_mqtt_sensor_dht22.ino | ha_mqtt_sensor_dht22/ha_mqtt_sensor_dht22.ino | /*
MQTT temperature and humidity sensor (DHT22) for Home-Assistant (esp8266)
https://home-assistant.io/components/sensor.mqtt/
Libraries :
- ESP8266 core for Arduino : https://github.com/esp8266/Arduino
- PubSubClient : https://github.com/knolleary/pubsubclient
- DHT : https://github.com/adafruit/... | /*
MQTT temperature and humidity sensor (DHT22) for Home-Assistant (esp8266)
https://home-assistant.io/components/sensor.mqtt/
Libraries :
- ESP8266 core for Arduino : https://github.com/esp8266/Arduino
- PubSubClient : https://github.com/knolleary/pubsubclient
- DHT : https://github.com/adafruit/... | Update ha_mqtt_sensor_dht22.ino | Update ha_mqtt_sensor_dht22.ino | Arduino | mit | mertenats/Open-Home-Automation,mertenats/Open-Home-Automation |
d1cf197269f12fbd23c3a8e7c70fd0606b09ac8d | examples/CustomSettings/CustomSettings.ino | examples/CustomSettings/CustomSettings.ino | #include <Homie.h>
const int DEFAULT_TEMPERATURE_INTERVAL = 300;
unsigned long lastTemperatureSent = 0;
HomieNode temperatureNode("temperature", "temperature");
HomieSetting<unsigned long> temperatureIntervalSetting("temperatureInterval", "The temperature interval in seconds");
void setupHandler() {
t... | #include <Homie.h>
const int DEFAULT_TEMPERATURE_INTERVAL = 300;
unsigned long lastTemperatureSent = 0;
HomieNode temperatureNode("temperature", "temperature");
HomieSetting<unsigned long> temperatureIntervalSetting("temperatureInterval", "The temperature interval in seconds");
void setupHandler() {
t... | Fix custom settings example | :bug: Fix custom settings example
| Arduino | mit | euphi/homie-esp8266,marvinroger/homie-esp8266,euphi/homie-esp8266,euphi/homie-esp8266,euphi/homie-esp8266,marvinroger/homie-esp8266,marvinroger/homie-esp8266,marvinroger/homie-esp8266 |
392a4174f1ec03074c9ced408d285b59371a9d82 | experiments/esp8266_monitor/esp8266_monitor.ino | experiments/esp8266_monitor/esp8266_monitor.ino | /**
* Takes a serial payload from the LoRa client (LoRa_Radiohead_RX.ino)
* and publishes it on various protocols.
*
* To subscribe to the UDP data: listen for broadcasts on 239.0.0.57 port 12345
* To subscribe to the MQTT data: mosquitto_sub -t solar
* To subscribe to the websocket go to WiFi.localIP() port 80... | /**
* Takes a serial payload from the LoRa client (LoRa_Radiohead_RX.ino)
* and publishes it on various protocols.
*
* To subscribe to the UDP data: listen for broadcasts on 239.0.0.57 port 12345
* To subscribe to the MQTT data: mosquitto_sub -t solar
* To subscribe to the websocket go to WiFi.localIP() port 80... | Set current_payload to the value of the first byte | Set current_payload to the value of the first byte
| Arduino | mit | theapi/solar,theapi/solar,theapi/solar,theapi/solar,theapi/solar |
58bfed9c3b75ff3fff3d83167ad2c41132e23ed2 | Clock.ino | Clock.ino | #include "Arduino.h"
#include <LiquidCrystal.h>
#include <Wire.h>
#include <SPI.h>
#include <RTClib.h>
#include <RTC_DS3231.h>
#include <Adafruit_NeoPixel.h>
#include <EasingLibrary.h>
#define UpdateSkips 8
#define LEDStartDelay 3
RTC_DS3231 RTC;
LiquidCrystal lcd(11, 10, 9, 12, 4, 3);
Adafruit_NeoPixel strip = Adafr... | #include "Arduino.h"
#include <LiquidCrystal.h>
#include <Wire.h>
#include <SPI.h>
#include <RTClib.h>
#include <RTC_DS3231.h>
#include <Adafruit_NeoPixel.h>
#include <EasingLibrary.h>
#define Brightness 30
#define UpdateSkips 8
#define LEDStartDelay 3
RTC_DS3231 RTC;
LiquidCrystal lcd(11, 10, 9, 12, 4, 3);
Adafruit_... | Add global brightness definition, fix display of minutes | Add global brightness definition, fix display of minutes
| Arduino | mit | Excure/LED-Clock |
cd0e4506c60bb26d6bbddd5878037e96376da71f | src/homie-sonoff-touch.ino | src/homie-sonoff-touch.ino | #include <ClickButton.h>
#include <Homie.h>
#define FW_NAME "homie-sonoff-touch"
#define FW_VERSION "2.0.2"
/* Magic sequence for Autodetectable Binary Upload */
const char *__FLAGGED_FW_NAME = "\xbf\x84\xe4\x13\x54" FW_NAME "\x93\x44\x6b\xa7\x75";
const char *__FLAGGED_FW_VERSION = "\x6a\x3f\x3e\x0e\xe1" FW_VERSION ... | #include <ClickButton.h>
#include <Homie.h>
#define FW_NAME "homie-sonoff-touch"
#define FW_VERSION "2.0.2"
/* Magic sequence for Autodetectable Binary Upload */
const char *__FLAGGED_FW_NAME = "\xbf\x84\xe4\x13\x54" FW_NAME "\x93\x44\x6b\xa7\x75";
const char *__FLAGGED_FW_VERSION = "\x6a\x3f\x3e\x0e\xe1" FW_VERSION ... | Reboot timeout for #4. To be tested. | Reboot timeout for #4. To be tested.
| Arduino | mit | kylegordon/homie-sonoff-touch |
e2cccca315e9cad149c34e97d1928849fc3b8939 | examples/GettingStarted/ValuePull/ValuePull.ino | examples/GettingStarted/ValuePull/ValuePull.ino | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | /**************************************************************
* Blynk is a platform with iOS and Android apps to control
* Arduino, Raspberry Pi and the likes over the Internet.
* You can easily build graphic interfaces for all your
* projects by simply dragging and dropping widgets.
*
* Downloads, docs, tuto... | Update ValuePull.ino | Update ValuePull.ino | Arduino | mit | okhiroyuki/blynk-library,flashvnn/blynk-library,flashvnn/blynk-library,blynkkk/blynk-library,ivankravets/blynk-library,sstocker46/blynk-library,ivankravets/blynk-library,CedricFinance/blynk-library,okhiroyuki/blynk-library,johan--/blynk-library,csicar/blynk-library,al1271/blynk-library,radut/blynk-library,csicar/blynk-... |
33a4c6a5a7c63ed51a934b1a228d5e18794bea91 | libraries/ESP8266HTTPClient/examples/StreamHttpClient/StreamHttpClient.ino | libraries/ESP8266HTTPClient/examples/StreamHttpClient/StreamHttpClient.ino | /**
StreamHTTPClient.ino
Created on: 24.05.2015
*/
#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
#include <ESP8266HTTPClient.h>
ESP8266WiFiMulti WiFiMulti;
void setup() {
Serial.begin(115200);
// Serial.setDebugOutput(true);
Serial.println();
Serial.println();
Ser... | /**
StreamHTTPClient.ino
Created on: 24.05.2015
*/
#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
#include <ESP8266HTTPClient.h>
ESP8266WiFiMulti WiFiMulti;
void setup() {
Serial.begin(115200);
// Serial.setDebugOutput(true);
Serial.println();
Serial.println();
Ser... | Update StreamHttpClient.ino (#6030) | Update StreamHttpClient.ino (#6030)
Fix WiFiClient vs. HttpClient declaration order
Fixes #6028 | Arduino | lgpl-2.1 | sticilface/Arduino,sticilface/Arduino,sticilface/Arduino,esp8266/Arduino,sticilface/Arduino,sticilface/Arduino,esp8266/Arduino,esp8266/Arduino,esp8266/Arduino,esp8266/Arduino |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.