data stringlengths 14 24.3k |
|---|
Raudi Raccoon#6691: Gonna need to I believe hardmod the Asus card
Justifiedparanoia#4764: i think so too
Justifiedparanoia#4764: want to just start with removing power limits in bios if possible tho
Justifiedparanoia#4764: just see how it does without throttling
Justifiedparanoia#4764: but i love my 290x. want to see i... |
Justifiedparanoia#4764: temps are 55-65 under water at max i think, which is when i have one fan running on the radiators
Justifiedparanoia#4764: thats with the cpu running full tilt at 300w or so, and 400w plus on the gpu
Justifiedparanoia#4764: custom water loop
Raudi Raccoon#6691: The memory should scale colder
Just... |
Raudi Raccoon#6691: Then it died due to my mounting stupidity.
Justifiedparanoia#4764: hard top at 4.9 24/7 for my 4690k and 6700k, and 4.15 1800x, 4.225 2700x.
Justifiedparanoia#4764: got a nice 5.1ghz suicide run on the 4690k tho, so that was cool
Raudi Raccoon#6691: Best suicide run for me was with my G3258 1.6v fo... |
Raudi Raccoon#6691: SLI enabled?
Raudi Raccoon#6691: Or it just doesn't have a profile for it
specialedge#0001: yeah SLI runs as configured in everything else
specialedge#0001: benchmarks, gamews
Fastfat#1597: http://hwbot.org/benchmark/unigine_superposition_-_8k_optimized/rankings?hardwareTypeId=videocard_2064&cores=1... |
LazyStreaming#9063: its the Zotac GeForce GTX 1070 AMP Extreme
∫ntegral#0450: 2000-2100 is what you should expect
LazyStreaming#9063: thats good 😄
LazyStreaming#9063: my 780ti died today after 5 years :v
∫ntegral#0450: it should boost to ~1900MHz
LazyStreaming#9063: okay 😄
LazyStreaming#9063: the Powerlimit is 250W s... |
zee#9000: yes
zee#9000: but used and msi so i dont think rma is an option
also both are undervolted, but i tried feeding it all kinds of volts and it still does it
Deleted User#0000: @zee it's most likely because the latest geforce driver update
Deleted User#0000: try uninstalling and installing the patch before the la... |
zee#9000: oh man dont even get me started on shadowplay. i've had the 57fps bug for so many months i haven't even checked if they've fixed it in probably at least a month. otherwise decent luck with recordings. iffy highlights/instant replay though
Deleted User#0000: your fps stays at 57 fps constantly?
zee#9000: no, r... |
illuminations#1433: oh i see
illuminations#1433: i have a usb flash drive can i sodder it to the GPU for more memory?
Mickulty#1560: ...
illuminations#1433: just kidding hahaha not that noob
illuminations#1433: thank you guys for your responses, you can tell by my lack of knowledge im not going to play with afterburner... |
Mickulty#1560: @Betrayed I mean, dual NVMe
illuminations#1433: i did some searching and people have oc'd this card and the gains are next to nothing, not really worth trying imho
Mickulty#1560: but yeah it's why AMD are pushing the whole HBCC model of VRAM
Mickulty#1560: anyhoo
Mickulty#1560: 'voltage limit' in afterbu... |
pkkshadow#5844: go in 10mhz steps, test with a benchmark, if it passes, then go 10 more
Deleted User#0000: Can it be rainbow 6 siege benchmarks
pkkshadow#5844: if the benchmark is unstable, back off 10, and test again to make sure that's stable
pkkshadow#5844: suppose, if that's all you play
Deleted User#0000: What is ... |
kona#9246: when it bugs out you know you at your limits
kona#9246: also, keep an eye on your temps
kona#9246: leave something like hwinfo64 / GPU-z running
kona#9246: and turn up your fans
Deleted User#0000: For now I'm just using rainbow 6 siege as a benchmark
Deleted User#0000: It has a benchmark option
kona#9246: se... |
kona#9246: yeah donier, set the game to windowed mode
kona#9246: then you can alt+tab to the other programs
kona#9246: without having to minimize the game
buildzoid#6254: AMD doesn't have boost on anything but VEGA
buildzoid#6254: and VEGA drops clocks as temps go up
buildzoid#6254: or voltage gets lowered
kona#9246: @... |
kona#9246: i discovered with my gpu i can get like 50mhz+ on my gpu just by putting my A/C to 19c and max fans XD no offsets at all
buildzoid#6254: at -70C VEGA will boost really high on it's own
buildzoid#6254: nah it's not at all like Nvidia
buildzoid#6254: on AMD you set 1600MHz
buildzoid#6254: and you get 1600Mhz
b... |
buildzoid#6254: I don't bench Nvidia cards
kona#9246: yeah donier, idk, this is why i reccomended using unigine
Deleted User#0000: Ok
kona#9246: i did it last week on my card
buildzoid#6254: I tried to do some testing at ambient on a 1070 once
Deleted User#0000: I found that +10 is faster than +40
buildzoid#6254: reliz... |
kona#9246: 1sec
buildzoid#6254: yeah cuz I had manual voltage control on the card
kona#9246: yknow ppl were talking about the new precision x1
buildzoid#6254: haven't used it
kona#9246: on the new rtx cards? the voltage slider?
kona#9246: it works.
buildzoid#6254: IDK I haven't had a single RTX card in my hand
kona#924... |
kona#9246: RTX voltage, 0% VS 50% offset
kona#9246: @Deleted User it depends on your specific card
kona#9246: but usually 100+
Deleted User#0000: Oh nice
Deleted User#0000: For me as long as it's stable at the offset thats.finr
kona#9246: what i do with a new nvidia is plug in 100, then go up in increments of 10
Delete... |
kona#9246: i'd say most regular cards can do 100-150
kona#9246: so if it's fine at 100, add 10
kona#9246: don't forget you set the increment then press apply or it won't apply
Deleted User#0000: Ok I've been incrementing starting from 10
kona#9246: and keep an eye on your thermals
Deleted User#0000: Alright just set at... |
Deleted User#0000: Damn
kona#9246: my old 1080 could do like +300mhz tops
Deleted User#0000: What else can I tinker with https://cdn.discordapp.com/attachments/305981966292090881/521630735799681048/JPEG_20181210_181406.jpg
kona#9246: your vram
kona#9246: also
kona#9246: core voltage
Deleted User#0000: Is that more risk... |
kona#9246: therefore with max volts offset u get a higher max OC
kona#9246: to put it very simply.
kona#9246: @Deleted User notice you can't chose any absolute values, they're all offsets to remove any chance of damaging the card
Deleted User#0000: Is that gonna cause damage?
Deleted User#0000: https://cdn.discordapp.... |
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/521633645518258178/JPEG_20181210_182545.jpg
Mickulty#1560: Yeah on Nvidia 10 and 20 series you just max ""core voltage"", it's not actually voltage though, it's a limit like power limit that gives you more boost, won't let you run higher offs... |
∫ntegral#0450: but in 100MHz increments
∫ntegral#0450: +500 is good tho
LazyStreaming#9063: But first max out core, i said it was crashing. Try it now with this voltage
LazyStreaming#9063: You said+
Deleted User#0000: Ok, so I did that
Deleted User#0000: Then put offset to 120
Deleted User#0000: Still crashed
Deleted U... |
LazyStreaming#9063: +1
∫ntegral#0450: and can have different temps which also affect the boost clock
Deleted User#0000: Huh
LazyStreaming#9063: Explained, custom design x have more clock then custom design y, so your offset +120 is different in each case
LazyStreaming#9063: We need the mhz ^^
∫ntegral#0450: ```
can you... |
显存频率
8008 MHz
Deleted User#0000: @LazyStreaming
kona#9246: @Deleted User what he means is
kona#9246: download GPU-z
kona#9246: then say what clock your core gets to while using w/e application you were using to test it
kona#9246: the speeds the card are rated for don't really translate to it's operating clocks in prac... |
LazyStreaming#9063: or gpuz
LazyStreaming#9063: https://cdn.discordapp.com/attachments/305981966292090881/521637628559228929/Screenshot_2.png
LazyStreaming#9063: @∫ntegral btw wish me luck with the oven method xd
∫ntegral#0450: 🤞
LazyStreaming#9063: gpu is just half dead so it can work xd
Deleted User#0000: https://... |
LazyStreaming#9063: xD
Deleted User#0000: Yea I'll do.it tommorow
Deleted User#0000: Got homework
kona#9246: he doesn't wanna get unigine or furmark
Deleted User#0000: Will download later
LazyStreaming#9063: thats good ^^
LazyStreaming#9063: if u have furmark just do this, its windowed and the hardest benchmark for you... |
pkkshadow#5844: yes?
pkkshadow#5844: probably because you didn't set a custom fan curve
pkkshadow#5844: ima guess that it is set to default which turns on above a certain temp
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/521641182980472832/JPEG_20181210_185543.jpg
Deleted User#0000: Fan... |
∫ntegral#0450: 🤔
Deleted User#0000: DUDE IM USINF FURMARK
Deleted User#0000: @weed
Deleted User#0000: @LazyStreaming
Deleted User#0000: He recommended me use it to benchmark
Deleted User#0000: OK
kona#9246: @Deleted User what brand is your gpu?
Deleted User#0000: Chinese Mainland Zotac
Deleted User#0000: Not internati... |
Deleted User#0000: @kona
kona#9246: yeah
kona#9246: sorry so dude
∫ntegral#0450: i mean, you really shouldn't be running furmark in the first place
∫ntegral#0450: 🔥
kona#9246: leave furnmark running in the background
kona#9246: and leave GPU-z and afterburner in front
kona#9246: then once u get a stable OC
kona#9246: ... |
LazyStreaming#9063: @Deleted User
Deleted User#0000: Ok
Deleted User#0000: Furmark benchmarks are fine
Deleted User#0000: But as soon as I run siege it's crashing Everytime
Deleted User#0000: @LazyStreaming
LazyStreaming#9063: Hmm thats wierd @Deleted User
LazyStreaming#9063: Try reinstall it
hitek#9195: 💥
LazyStream... |
kona#9246: like gigabyte's aorus, asus' poseidon, and EVGA's kingpin, galax HOF
Deleted User#0000: aye
kona#9246: although for regular overclocking the EVGA FTW's are great
kona#9246: so are the aorus extremes
Deleted User#0000: beyond MSI AB OC
Deleted User#0000: specifically
Deleted User#0000: speaking from VRM and o... |
Deleted User#0000: how does Zotacs VRMs and AIB designs compare?
kona#9246: yeah, the asus 1080Ti poseidon was great
Deleted User#0000: to EVGA
Deleted User#0000: in regards to reflashing
kona#9246: in regards to flashing idk
kona#9246: but the chinese vendors have never been well known for OC stuff
Deleted User#0000: ... |
kona#9246: pending the release of the kingpin
Deleted User#0000: oh i gotcha
kona#9246: the FTW3 has the biggest power draw of all cards RN
kona#9246: (i have one)
kona#9246: 373W
Deleted User#0000: i stayed away from EVGA for a while because they come pretty tight, and didn't have a lot of OC Headroom before a re-flas... |
kona#9246: if it's any consolation, i can run unigine 1440p with a 1ghz memory offset
Deleted User#0000: you don't need active VRAM cooling for a good OC do you?
kona#9246: well the GDDR6 runs a lil hot tbh
kona#9246: for a core OC no
kona#9246: but i OC for gaming performance
Deleted User#0000: for memory OC ?
Deleted... |
Deleted User#0000: yeah it's ugly and silliy
kona#9246: i mean, i've been there, it does work and cost literally over 150$ cheaper
Deleted User#0000: but the low flow restriction opens a lot of doors and it's just minmaxing thermal performance for anything pre chiller
kona#9246: yeah
kona#9246: but i can't leave an ope... |
Deleted User#0000: Air is amazing these days
kona#9246: woah awesome
Deleted User#0000: especially for OC i5
kona#9246: yeah, 5ghz no offsets temps never above 72c
Deleted User#0000: I'm here at 5.3 and will max load 55C but i get the same results when ambients go up with the windows closed at 5.1 ghz
Deleted User#0000... |
Deleted User#0000: what's the temp today
Deleted User#0000: my fingers are freeeziing
Raudi Raccoon#6691: Its -4 outside today, so I get cucked
kona#9246: the 2080Ti gets hot af bro, that's why i'm going for a loop
Deleted User#0000: but pain is weakness leaving the body
kona#9246: uhh i think it's like 28c
kona#9246: ... |
kona#9246: ffs please change places with me
kona#9246: 50c=death hahah
kona#9246: no itll reach mid/high 30's
Deleted User#0000: Ahahaha hold on i'll tell you what it used to be
kona#9246: i love the cold
Deleted User#0000: me too
Deleted User#0000: yeah when i was in the military i trained in 50C weather
Deleted User#... |
Deleted User#0000: 15 Canteens of H20
kona#9246: gah i can't wait for hw mods to come out and whatnot
kona#9246: the guys already active working on deciphering the 2080Ti
Deleted User#0000: I learned a lot about heat while i was in the military
Deleted User#0000: i think that's why i got so interested in liquid cooling... |
kona#9246: kek we're the opposite weather but
kona#9246: if i were you i'd 100% run my rad outside
Deleted User#0000: i'm scared about condensation in the snow
Deleted User#0000: I've seen guys in cold areas of hte world use a special rack they put their rads on
Deleted User#0000: i think it helps with the condensation... |
kona#9246: radiators are cheap af in the states kek
Deleted User#0000: yeah pmuch can get a full copper for 50 bucks
kona#9246: i'd keep the pumps and stuff inside and just tun the tubes + rad outside
Deleted User#0000: I was thinking of using a 24V pump outside tho
kona#9246: brazil is like 100% import tax on everythi... |
Deleted User#0000: Super good rad for rack cooling
Deleted User#0000: but yeah
Deleted User#0000: i could save money and get the same results
kona#9246: btw
kona#9246: you think a 240mm rad will be enough for a 2080ti?
Deleted User#0000: depends on the rad but mostly yes
Deleted User#0000: some cheap 240 slim rads won'... |
kona#9246: yeah i have an s340 elite so i'm restricted to either 240mm, or out - of-case rad
Deleted User#0000: where i'm at, i'm fine witth my POS EK rads
Deleted User#0000: yeah welcome to NZXT
Deleted User#0000: been there
kona#9246: and only 240mm cause i cut a huge hole on top of the case hahaha
Deleted User#0000:... |
kona#9246: and if i order it i have to pay double over the item + shipping
kona#9246: naaa
Deleted User#0000: damn
kona#9246: only mid-range mainstream stuff
Deleted User#0000: Well there are other NZXT cases with better Rad options
kona#9246: hah i had to smuggle in most of my components
Deleted User#0000: even though... |
kona#9246: and solder other parts in
Deleted User#0000: can you get phanteks cases
kona#9246: na
Deleted User#0000: ahh that's too bad
kona#9246: i could prolly fit a 360 if i remove the whole top of the case
Deleted User#0000: they are the best if you like to cu t holes in things yet still have options tobegin with
De... |
kona#9246: cause if the difference is like 24c to 35c i wouldn't care
Deleted User#0000: yeah i rip the front panel off for airflow
kona#9246: meh i like having rads on top for exhaust
Deleted User#0000: i'll get a design going for t hat too
Deleted User#0000: me too
Deleted User#0000: and you can't get that with the s... |
Deleted User#0000: since you can't get your hadns on other cases NZXT is great just a bit trickier
kona#9246: https://cdn.discordapp.com/attachments/305981966292090881/521753205713928197/JPEG_20181210_162059.jpg
kona#9246: work still in progress but
Deleted User#0000: yup
kona#9246: hahaha
Deleted User#0000: there you... |
Deleted User#0000: yes sleeved cables are a must
Deleted User#0000: not because they look good more because that's where the power comes from
kona#9246: see the rgb strips? my sister got them for a school project in like 2007 XD
Deleted User#0000: nice DIY stuff?
Deleted User#0000: \from like
Deleted User#0000: aliexpr... |
Deleted User#0000: THey don't look like cablemod
kona#9246: i just tested them with an ohmmeter and they were fine so i used em
Deleted User#0000: i use 16 AWG wire
kona#9246: oh check this baby
Deleted User#0000: i had my board cable sleeved for me the rest i did by hand
kona#9246: https://cdn.discordapp.com/attachme... |
TurtleMasterFlex#5021: Lots of bending
xmokushirokux#9834: whats a general range on a 1080 ti I should be looking for for GPU/Memory clocks, so far only tried using asus gpu tweak ii, added +70 to gpu clock and +500 on the memory clock for total of 2025 mhz gpu/11520 mhz mem (CLim: 2037 MHz, MLim: 2890 MHz), got over ... |
PhantomGaming27249#6489: big deal
PhantomGaming27249#6489: we are getting memory timing control on amd gpus
PhantomGaming27249#6489: directly from the driver
PhantomGaming27249#6489: and auto under volting and overclocking
pkkshadow#5844: removed it, only because that link has been posted twice in the last hour in two ... |
PhantomGaming27249#6489: sme
PhantomGaming27249#6489: same but I think i might grab a 590
LazyStreaming#9063: Then its time to upgrade my 780ti :v
PhantomGaming27249#6489: hold me over until big navi
LazyStreaming#9063: Yeah I wait for big navi too
LazyStreaming#9063: 7nm will be fking good
PhantomGaming27249#6489: I h... |
PhantomGaming27249#6489: their opnegl driver sucks
LazyStreaming#9063: Yee
LazyStreaming#9063: But generally its nice xd
PhantomGaming27249#6489: yeah
PhantomGaming27249#6489: seeing as I have a 70 dollar amazon card and a prime visa
PhantomGaming27249#6489: 590 for 200 bucks
LazyStreaming#9063: Btw do you know the min... |
PhantomGaming27249#6489: 300mhz
PhantomGaming27249#6489: soc/memory voltage is 1000mv
PhantomGaming27249#6489: which is also voltage floor from what i undertand
PhantomGaming27249#6489: well i gtg
PhantomGaming27249#6489: peace
LazyStreaming#9063: Btw if im going below idle, so as examole 740, the card dont go on right... |
PhantomGaming27249#6489: by default yeah its on
PhantomGaming27249#6489: you can turn it off if you want a bump in performance
PhantomGaming27249#6489: sometimes it messes up cards with dynamic clocks when overclocking
PhantomGaming27249#6489: but otherwise its harmless
LazyStreaming#9063: But i just wait for the New ... |
Stef#0241: I ran benchmarks (dirt rally benchmark mode) with +135 core and +200 Memory for half an hour and got 11% increase in fps, gpu temperature stable went up max 70°c
Stef#0241: When i try to overclock memory more it just gives me bsod a couple of seconds after starting the benchmark (even +250 on memory only)
St... |
Jumper118#2286: https://cdn.discordapp.com/attachments/305981966292090881/522434963870711808/IMG_20181212_152951.jpg
Jumper118#2286: Also what voltage can I got upto?
Jumper118#2286: Only tried upto 1.28v so far?
Jumper118#2286: Tried upto 1.35v and it does 1/2 of gt1 then crashes
yosarianilives#1841: @Jumper118 treat... |
yosarianilives#1841: @Deleted User use the sapphire trixx pinned in #subzero-overclocking
yosarianilives#1841: Should give you up to 1.5v
yosarianilives#1841: If that doesn't work then time for :hardmod:
Deleted User#0000: @yosarianilives thank you very much
Deleted User#0000: Oh sweet it's just started it first time @... |
Ella Banana#9382: rivia tuner is useful for super old shit
יPiotrKFtwייߟا#3700: amd radeon hd 6620g is old
Ella Banana#9382: dunno if its old enough
Ella Banana#9382: i know nothing of that gpu
Mickulty#1560: @יPiotrKFtwייߟا maybe just ask without spamming people if you're not sure
Marcus Antonius#1439: It's more ATi X... |
Mickulty#1560: In my experience, I've had issues with overclocks not taking on AMD iGPUs. Supposedly older drivers work but I haven't had chance to try.
Mickulty#1560: @Marcus Antonius it's valled VLIW experience
Marcus Antonius#1439: Hmm, that's true, the newer drivers are a mess for old stuff
Marcus Antonius#1439: `... |
יPiotrKFtwייߟا#3700: rivatuner by default doesn't allow to overclock it
Marcus Antonius#1439: Wait, FM1 right? Use the BIOS
יPiotrKFtwייߟا#3700: socket FS1
יPiotrKFtwייߟا#3700: bios is locked
Marcus Antonius#1439: So a laptop?
יPiotrKFtwייߟا#3700: yes *but before you are gonna say "do not overclock a laptop", i take ri... |
יPiotrKFtwייߟا#3700: oldest catalyst driver is 8.900.7
Marcus Antonius#1439: The CPU really didn't like it, and it was on watercooling so
Marcus Antonius#1439: Not that old,
יPiotrKFtwייߟا#3700: there might be older
יPiotrKFtwייߟا#3700: i took this version from post that was on 2013
Marcus Antonius#1439: Use drivers fr... |
יPiotrKFtwייߟا#3700: @Marcus Antonius the gpu clock sensor is sometimes glitched when i set the clock to 590, the sensor says 2000 mhz
יPiotrKFtwייߟا#3700: anywhere else, 457.1
יPiotrKFtwייߟا#3700: @Marcus Antonius but how can I try using rivatuner anyway?
יPiotrKFtwייߟا#3700: there was one program that clocked it to... |
PhantomGaming27249#6489: they added pseudo timing control
yosarianilives#1841: @PhantomGaming27249 try it on your 8705g, lul
PhantomGaming27249#6489: they don't support it directly
PhantomGaming27249#6489: the only way to oc it as far as i know is through registry hacks
yosarianilives#1841: Use registry to enable the o... |
PhantomGaming27249#6489: i know you can't use wattman on those
PhantomGaming27249#6489: cause at my system at home I have 7850
PhantomGaming27249#6489: in it with the 380
PhantomGaming27249#6489: its to run other monitors
unity-OC#9785: @Moderator would you mind giving me the Kepler Experience role? Been running GTX770... |
Niobium#6334: @whiteshark Yes, but as of now, no one has the role
NuclearDebris#1984: Thank you @Niobium
whiteshark#1560: does anyone even have a card?
Niobium#6334: Richie and psycho both do I think
Niobium#6334: But I'm not sure how much they've done with it, and no one's asked for it
Deleted User#0000: Hi guys, can ... |
Deleted User#0000: Oh ok thanks. Sorry im so blind getting sick with flu I think :(
Deleted User#0000: not thinking clearly
Deleted User#0000: Im having some weird frame skipping across windows
Deleted User#0000: Microstutter i think its called
Deleted User#0000: @TurtleMasterFlex @∫ntegral Thanks for the help!
Ta-daa... |
PhantomGaming27249#6489: seems good
PhantomGaming27249#6489: "Here are my results from using poclmembench. Average of three runs for each setting. 2185 mhz was the highest clock I could reach with level 2 timings without artifacts showing in gameplay. Card is a Gigabyte Aorus 580 8 GB with Hynix memory (H5GQ8H24MJR acc... |
∫ntegral#0450: 2000 -> 2185 is like 9%
∫ntegral#0450: but 182 -> 228 is more like 20%
PhantomGaming27249#6489: 10% from clock 10% from timing?
PhantomGaming27249#6489: this is consistent with what I have seen on custom 580 bioses for mining
PhantomGaming27249#6489: probably does nice things for a overclocked 590
Joefes... |
inversion#6373: @TurtleMasterFlex what thread about detailed 980ti mods is this? If ya don't mind sharing? 980ti owner here.
inversion#6373: https://discordapp.com/channels/305980946664914947/305981966292090881/523009946191790080
TurtleMasterFlex#5021: One second I'll find the page
inversion#6373: sweet highly appreci... |
TurtleMasterFlex#5021: Not a bad score, yours is 19300 and for a blower style? Really good
inversion#6373: the AAX3 is a godsend.
TurtleMasterFlex#5021: I've got a gigabyte xtreme Ln2 980ti
TurtleMasterFlex#5021: I get a consistent 21300
inversion#6373: It's an AAX3 slapped 980ti because fucking jet engine blower :REEE... |
TurtleMasterFlex#5021: You can run 1.25V and get 1500 at 70c, but same voltage at 45c could get up to 1575
inversion#6373: from 83c at full load with a blower, AAX3 keeps it at bay at 67c, at 40 to 50 percent fan speed
TurtleMasterFlex#5021: Nice, if I Max my fans I don't pass 51c, but a nice quiet fan speed of 65% has... |
TurtleMasterFlex#5021: If I was home id take a pic, but my fans hit 100% at 60c..
inversion#6373: @TurtleMasterFlex yeah, because it probably wouldn't hit that high anyway :GWloopyBlobShrug:
TurtleMasterFlex#5021: Oh yea, tid bit of info that may help, 980tis do hit a thermal wall at 61-63 c that will always result in... |
Deleted User#0000: could I also use 3d mark for trying to spot artifacting?
PhantomGaming27249#6489: sure
PhantomGaming27249#6489: personally if your trying for a 24/7 oc
PhantomGaming27249#6489: i might use heaven
LazyStreaming#9063: I use heaven aswell for 24/7
Gunpun#4602: alright, need to undervolt my 390s
inversio... |
TurtleMasterFlex#5021: But that's with bios mods
inversion#6373: @TurtleMasterFlex right. +10 mV is the right increment aye?
inversion#6373: when adding voltage
TurtleMasterFlex#5021: Really any number for voltage
TurtleMasterFlex#5021: Oh shit I forgot
TurtleMasterFlex#5021: Only go up in 13 mhz increments on the cor... |
hitek#9195: lol I mean I recognize your name, just not what server 😛
inversion#6373: bapo :ppchristmasparrot:
hitek#9195: figured
יPiotrKFtwייߟا#3700: i installed 12.1 driver and setting clock worked fine however the max clock is still 457.1 mhz, how can i set it higher?
ENZO#2758: put it under load
DualMono#4260: @Pa... |
ENZO#2758: prob 1c outside of it too
ENZO#2758: sometimes gpu boost can be lame
ENZO#2758: But for the most part I think its good
ENZO#2758: set a custom fan curve if you have not
DualMono#4260: So around 60 C causes throttling?
ENZO#2758: well kind of
ENZO#2758: there are certain temp ranges that change the profile of... |
ENZO#2758: and reasons and science and gallium
ENZO#2758: I dont even know where to start trouble shooting so i sit and sulk instead
ENZO#2758: I have a super sweet fluke multimeter but no clue how to use it and that's the real issue
ENZO#2758: Yea so BTW if anyone knows where I should start testing for failures on my ... |
ENZO#2758: could it be a bios glitch
ENZO#2758: did you try reflashing
יPiotrKFtwייߟا#3700: it's impossible to reflash bios on that igpu
יPiotrKFtwייߟا#3700: https://cdn.discordapp.com/attachments/305981966292090881/523452050667733002/unknown.png
ENZO#2758: Ive never played with a 1060
ENZO#2758: what brand/model is y... |
ENZO#2758: Feelsdumb
יPiotrKFtwייߟا#3700: *amd radeon hd 6620g*
ENZO#2758: oh dualmomo had the 1060
ENZO#2758: lol
יPiotrKFtwייߟا#3700: ye
ENZO#2758: so you are on an apu?
יPiotrKFtwייߟا#3700: yeah
ENZO#2758: latest bios?
יPiotrKFtwייߟا#3700: on the gpu ?
ENZO#2758: the motherboard
ENZO#2758: you dont have a seperate G... |
יPiotrKFtwייߟا#3700: @ENZO i mean.. unlock advanced settings on the LATEST bios and flash it not-rsa signed
ENZO#2758: you just edit the lates file with amibcp or the coresponding tool per bios manufacturer
ENZO#2758: oh i got ya
ENZO#2758: cuz the partial brick issue with the rsa signed mod bios
ENZO#2758: Fucking oe... |
ENZO#2758: do you have h20ez?
ENZO#2758: also a lot of ami tools work on insyde
ENZO#2758: do extract a string at least
ENZO#2758: then hex edit it
יPiotrKFtwייߟا#3700: wait i'll get the latest bios first
ENZO#2758: You on a g6?>
יPiotrKFtwייߟا#3700: yes
ENZO#2758: Im pretty sure its gonna be fine with a mod, but you a... |
ENZO#2758: Even then once in a while the windbond Soic8s like to just fully die
יPiotrKFtwייߟا#3700: spi programmer *ch341a probably i dont remember model since i used it a long time ago* and soic8 clip
יPiotrKFtwייߟا#3700: tho idk where's the bios chip
ENZO#2758: oh the socket
ENZO#2758: isnt ch341a a socket
NuclearDe... |
יPiotrKFtwייߟا#3700: but it didnt do much because i couldnt access the advanced settings anyway
יPiotrKFtwייߟا#3700: amibcp cant open the .bin file ffs
ENZO#2758: oh no no
ENZO#2758: amibcp only does aptio
ENZO#2758: and version per version
ENZO#2758: you can open with mmtool
יPiotrKFtwייߟا#3700: https://cdn.discordap... |
יPiotrKFtwייߟا#3700: the one near the cable and the compasator is not accessible so i couldn't read it
יPiotrKFtwייߟا#3700: https://cdn.discordapp.com/attachments/305981966292090881/523462101235138560/WP_20180323_18_08_26_Pro.jpg
יPiotrKFtwייߟا#3700: there's also one with black dot on it
ENZO#2758: you dont need to do... |
ENZO#2758: ans your insyde for the most part will cock block you
יPiotrKFtwייߟا#3700: so read the chip, open the file in the mmtool, mod and rewrite it
ENZO#2758: ooh fuck it im gonna figure out which smd on my Ti died even if it kill me
ENZO#2758: yea its always best to mod an image of your bios
ENZO#2758: But for ins... |
PhantomGaming27249#6489: can't tell which is which
PhantomGaming27249#6489: any ideas
Tj#6268: Can anyone help me with gething more then 1.35v on hd5870? Want to try and bench 1100mhz
Tj#6268: Little experience on amd cards unfortunetly :(
Tj#6268: I flashed a 1.45v bios but it still goes to stock voltage under load or... |
Deleted User#0000: after messing with it , it is now showing wrong values for the mem clock
whiteshark#1560: @Ground classified tool, hof tool, :hardmod:
whiteshark#1560: do you have it on the ln2 bios?
Ground#4016: yeah
Ground#4016: still stuck at +200 on core
bizude#3567: This guy on Twitter tried to tell me OC incre... |
Problem is, if I increase fan speed in Afterburner, the fans constantly run at that speed regardless of load.
How do I get to run at a more aggressive curve without just running at that speed all the time?
мопѳтнειѕτ™#1078: If I leave Fan settings at Auto, it's not enough and the GPU gets up to about 72C before the be... |
DaGunzi#1241: oh yeah oops
мопѳтнειѕτ™#1078: okay so I set the curve, then re-enable Auto on the main screen?
мопѳтнειѕτ™#1078: as long as the little custom curve box is there
мопѳтнειѕτ™#1078: https://cdn.discordapp.com/attachments/305981966292090881/523646135072718859/unknown.png
мопѳтнειѕτ™#1078: yeah that seemed t... |
мопѳтнειѕτ™#1078: aah okay
Ant_IV#4437: What is the best way to clean this blue stuff https://cdn.discordapp.com/attachments/305981966292090881/523649111799627792/image0.jpg
Deleted User#0000: @Jumper118 Check your cinebench thread i finally beat you.
inversion#6373: @Ant_IV alcohol and coffee filter
inversion#6373: @T... |
TurtleMasterFlex#5021: Especially if you are copying a MUMOD bios you just copy the values over and I'm the end you should have a restriction free bios
inversion#6373: apparently the author behind mumod did a bios mod for evga sc which also works for hydro copper(the one you linked me, but on page 719)
inversion#6373: ... |
inversion#6373: @TurtleMasterFlex for some odd reason i can't match 1:1 some of the voltages and can't manually dial it in. Hex edit perhaps(i know unsafe idea).
inversion#6373: also i don't understand why some of the cells in boost table from modded bios has less yellow highlighted cells vs stock one that I modded. A... |
TurtleMasterFlex#5021: That's actually a bad bios edit
TurtleMasterFlex#5021: Someone didn't know what power settings they messed with
TurtleMasterFlex#5021: @specialedge did you buy that card like that? Mess something up yourself?
TurtleMasterFlex#5021: Get ripped off?
specialedge#0001: No I bought it as "underperfor... |
TurtleMasterFlex#5021: If you want me to try I can, or you can start learning how to do it with the links and info ive provided above
specialedge#0001: I may throw her back into the system and start tinkering. Thank you for the offer
TurtleMasterFlex#5021: Oh I forget timezones is a thing lol, 6 hours from now I'd be a... |
Cautilus#5912: And what temps are you getting?
Sorrydough#0424: uhhhhh I gotta be honest here I just reinstalled my OS and I've forgotten what clocks I had it at and don't feel like figuring all that out again BUT iirc it was sticking around 75c on max load with 95% fan speed
Sorrydough#0424: without the OC it would be... |
Sorrydough#0424: seriously though I think hybrid coolers are super cool
Sorrydough#0424: why can't I find them to buy for graphics cards
Cautilus#5912: G12 + AIO ggez
Sorrydough#0424: huh
Sorrydough#0424: it supports everything?
Sorrydough#0424: that's actually insane
∫ntegral#0450: yeah i have a g12 + h55 on my strix ... |
Cautilus#5912: eh, probably more of the latter unless your stock cooling solution can't keep up (see 1080ti FE)
∫ntegral#0450: i did it because i already had it before
∫ntegral#0450: it allows you to skimp on the next gpu you buy
∫ntegral#0450: save some money
Cautilus#5912: true
∫ntegral#0450: probs will pay itself of... |
Sorrydough#0424: you gotta make sure this thing is compatible with the GPU that doesn't exist yet
Sorrydough#0424: for you to upgrade the theoretical nonexistent GPU using it
disabled account#8118: Why is my gpu overclocking itself beyond its limit? I have it set to +235 core clock, which should be around 1950-60 mhz. ... |
Deleted User#0000: It's doing +1000mhz ram and 130+ cpu
R8mysetup#0001: got that juicy 7700k to a fat 5ghz and ran a stress test all night. anything else i need to do?
∫ntegral#0450: use it normally and see how it holds up?
∫ntegral#0450: also why in gpu overclocking?
R8mysetup#0001: oof clicked wrong channel i guess
∫... |
Niobium#6334: I'm honestly kind of amazed NV lets the slider go that far.
Niobium#6334: Wouldn't have been surprised if they capped it at +1000 effective/2 like most other Pascal cards.
Niobium#6334: Also seems weird that they're shipping the *new* cards(with VRAM rated for 10-11Gbps) at 8Gbps when the "old" cards ship... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.