data stringlengths 14 24.3k |
|---|
hitek#9195: I get that awesome ghost monitor from running HDMI too
Deleted User#0000: lol
Zoyata#4921: Yeah I'm on beta 9
Zoyata#4921: Maybe a later one
Zoyata#4921: Because 1000 is fine
Zoyata#4921: Although Idk of my 750 watt is cutting it, the gpu drivers were crashing when I did a cpu stress test... which didn't ma... |
Makikou#7777: I don't think 1.053 is necessary for 2000mhz boost on 2070
Makikou#7777: So.. guess I'll experiment
Ground#4016: Is there any way of lifting the powerlimit on a vega?
Mickulty#1560: Powerplay tables, I think?
Mickulty#1560: GN did stuff about it with a V56
whiteshark#1560: yes powerplay tables
whiteshark#... |
Cautilus#5912: yep
Makikou#7777: I need to try the undervolting thing too so
lardy#1580: rx480, seem to be very power limit limited I think, gpuz doesn't show a perfcap reason like with nvidia gpus so I'm not 100% sure, but just lowered voltage and got a better score
lardy#1580: how easy is it to increase the power lim... |
Mickulty#1560: yeah normally you get +50%, rs is limited to +20% because it's a low-end model
Mickulty#1560: be a little careful with bioses
Mickulty#1560: it has an rx 460 pwm controller
Mickulty#1560: can't just slap a GTR bios on it
Mickulty#1560: the stock heatsink has very nice vrm cooling though
lardy#1580: appar... |
wrath#4261: Oh damn
wrath#4261: If they were higher I could see why they're that low
specialedge#0001: For 1080ti are the GPU core clock intervals 13mhz?
whiteshark#1560: 12.5
specialedge#0001: so does it help to just aim for those values?
specialedge#0001: what about memory overclock?
specialedge#0001: trying to tune ... |
[ʞR] Otroud#7943: anyone here used to rtx 2060 yet?
[ʞR] Otroud#7943: whats the difference between a founders and a aftermarket company rtx card?
[ʞR] Otroud#7943: gonna be buying one on the 1st
[ʞR] Otroud#7943: @Betrayed you can run the graphics in compatability mode for battlefront and get sli to work on BFV
Betraye... |
Corns McGowan#0723: aight tyty
Corns McGowan#0723: where can i find a list of typical overclocks for my gpu model? (EVGA GTX 980 Ti ACX 2.0+)
∫ntegral#0450: look up reviews of other 980tis
∫ntegral#0450: usually 1450-1500 is what you should be aiming for
Corns McGowan#0723: aight sweet, tyty
Corns McGowan#0723: wait, f... |
Corns McGowan#0723: right
Corns McGowan#0723: i see
Corns McGowan#0723: so it's really just
Corns McGowan#0723: 1.7 -> 2.0
∫ntegral#0450: yes
Corns McGowan#0723: i see, tyty
Corns McGowan#0723: it would make a significant difference, considering i mainly play in vr, right?
Corns McGowan#0723: samsung odyssey+, 1600x144... |
Corns McGowan#0723: should i just run 100% while testing
Corns McGowan#0723: and then adjust fan curve later
Alcyone#2233: For max oc testing, yes. For daily I just set a manual speed I can stand then start there, if its getting hot and going jet fighter I don't wanna run it like that for 3 more fps in games
Corns McGo... |
Corns McGowan#0723: 100% fan is loud
Corns McGowan#0723: VRAM oc is the same deal right? just +25 until i get artifacts
∫ntegral#0450: i'd go in bigger steps
∫ntegral#0450: +100
Corns McGowan#0723: oof
∫ntegral#0450: do you know what memory type you have?
Corns McGowan#0723: and i'd be looking for the same artifacts ri... |
∫ntegral#0450: so that'd be +400
∫ntegral#0450: see if you can get that stable
Corns McGowan#0723: +495 = 4000MHz? https://cdn.discordapp.com/attachments/305981966292090881/539014352720756736/unknown.png
∫ntegral#0450: oh yeah right
∫ntegral#0450: i misread
Corns McGowan#0723: nws
∫ntegral#0450: 3500 is stock
Corns McG... |
Corns McGowan#0723: Lets do +400
Corns McGowan#0723: This is in combination with +240 btw, and idk if thats stable
Corns McGowan#0723: So could just be core clock
Corns McGowan#0723: i can use the usage graphs to detect if a crash occurred recently, right?
eg this usage dip in the middle https://cdn.discordapp.com/atta... |
repz#1314: Yes but I don't remember seeing this slider in AB
Makikou#7777: https://cdn.discordapp.com/attachments/305981966292090881/539096818747965440/unknown.png
Makikou#7777: you mean core voltage?
repz#1314: oh yes nvm
repz#1314: https://cdn.discordapp.com/attachments/305981966292090881/539096933441208331/unknown... |
Deleted User#0000: Probably not worth it
Deleted User#0000: I think the msi one is already OC'd so id probably see even less gains
wrath#4261: why is it that every ab I see has the voltage as a percent slider
wrath#4261: but mine has always (even with different cards) been as mv?
Mickulty#1560: % is an nvidia 10 and 20... |
Corns McGowan#0723: Yeah im on 9th gen and its just +200MHz
matmanmining#2535: I was wondering if anyone might have some ideas on MSI RX570 issues I am having. These gpus are being used to mine. When I do a Polaris one-click ubermix3.1 or ubermix3.2, the gpus run with variable core frequency. That is to say, the co... |
4a61636b#5675: I picked up an evga 1070 sc BE for 240
[ʞR] Otroud#7943: i want to rty 4k gaming
[ʞR] Otroud#7943: and the rtx 2060 is rumored to be slightly better than a gtx 1070ti
wrath#4261: its in between the 1070 and 1070ti
wrath#4261: which , admittedly, is a hilariously small gap
Betrayed#3582: There is a decent... |
Karavusk#8119: 100% fan speed from everything. It got a ton of airflow and maxed out at like 65c I think. I am pretty sure I wont get that much more with a waterblock to be honest
DaddySpaghetti#1199: I think you’ll gain some with lower temps, especially in benchmarks
kostaxr#9448: @DaddySpaghetti what about my gpu?
Da... |
Cold#0382: But okay
Betrayed#3582: #ebay-deals can be more than just ebay
Betrayed#3582: ```For sharing PC hardware bargins found on the internet. Linking your own stuff is ok within reason but you should conduct your sale through an external site as we're not willing to be responsible for the safety of transactions. ... |
Mickulty#1560: I haven't really used it much, just know of it and know people use it
Deleted User#0000: is there any noticable difference in performance between vega 56 bios flashed and vega 56 undervolted and oc'd
∫ntegral#0450: you might be able to push the hbm higher with a v64 bios
Deleted User#0000: how much diffe... |
Snaky115#4135: besides built in wattman and OverDrivenTool. Trixx for me caused the 300 core lock and had to DDU to fix it for myself at least
Food#9417: I think I had fury drivers on it?
Food#9417: What's the preferred software then
Afterburn?
Snaky115#4135: i dont know if afterburner works either, never tried
Food#94... |
Deleted User#0000: Hey. Got this 2080 Ultra up to around 2040/2070mhz on the GPU. Was wondering if that's a decent score, and if my power limit is too high. https://cdn.discordapp.com/attachments/305981966292090881/540158516237959178/Screenshot_164.png
Cautilus#5912: if the OC scanner's pushed it up to 2040 there's pro... |
Cautilus#5912: oh you can max voltage as well, that might help
Deleted User#0000: Would it overvolt?
Cautilus#5912: what do you mean by "overvolt"? because "overvolting" is just increasing voltage over a normal voltage
Deleted User#0000: Apologies, in a way that would decrease the lifespan of the card significantly
Cau... |
Deleted User#0000: You been overclocking anything recently?
Cautilus#5912: r9 290 on my new custom water loop is the most recent thing I've subbed with
Cautilus#5912: before that I was benching my really good 4790K and a 2500K on an AIO
Deleted User#0000: Custom water seems like so much fun
Deleted User#0000: Imagine i... |
Cautilus#5912: but you can always just let the liquid temps cool down if yer need
Deleted User#0000: just that for ultra settings gaming and cinema 4d rendering I was thinking water might get too hot
Deleted User#0000: But air is around 75c max gpu 55c cpu
Deleted User#0000: @Cautilus what do you think?
Cautilus#5912: ... |
Deleted User#0000: thats the one scary thing. Say you hit the lottery on air, go to water. Mess up something and then there's the performance increase gone
Cautilus#5912: if you "hit the lottery" that should be consistent no matter what cooling you're using, you'd have to fuck something up pretty bad to reduce your sil... |
Deleted User#0000: That’ll be awesome when it’s all running in a case. Have you had the issue where Asus’s cheap sensor chip crashes the system if you use 2 temp monitoring programs together?
Cautilus#5912: ah well this is my benching system so it ain't ever going in a case, but I haven't had that issue no
Deleted User... |
Deleted User#0000: If these temps could go down it’d have no issue going higher
Betrayed#3582: You need to drop temps
Deleted User#0000: I want to but the thing is way too loud. 75c max in Battlefield 5
Betrayed#3582: You can try a differenet paste but that is only a few C difference
Makikou#7777: Go liquid :PatrickSmu... |
buk#7792: 82
pkkshadow#5844: and not so great
pkkshadow#5844: might wanna back off the oc
buk#7792: its a gigabyte 980ti
buk#7792: not overclocked
buk#7792: its loud
buk#7792: idk why
pkkshadow#5844: then get an aftermarket cooler, those usually bring temps down some.
buk#7792: i do
buk#7792: cooler for gpu?
buk#7792: ... |
pkkshadow#5844: yeah. like the coolers artic sells.
pkkshadow#5844: yes.
buk#7792: only done that to cpus
pkkshadow#5844: you take off the cooler, and repaste it.
buk#7792: cant i just take off the fans
buk#7792: and use
pkkshadow#5844: it's quite easy. there are loads of videos on youtube. and i'm sure someone has don... |
buk#7792: i can take my gpu fans off and replace them with a aftermarket cooler?
buk#7792: and heatsink too
pkkshadow#5844: you take off the cooler the card came with, and replace it with an aftermarket cooler.
buk#7792: so yes to my question..?
pkkshadow#5844: OR, you use the nzxt bracket that allows you to mount an a... |
pkkshadow#5844: yeah, but not with a bracket
buk#7792: so which do i use?
buk#7792: out of the 4?
pkkshadow#5844: trying to find the arctic gpu cooler on microcenter's site, the nzxt bracket can be bought off of amazon
buk#7792: so i should do the bracket way?
pkkshadow#5844: if you want cooler temps, sure.
buk#7792: w... |
pkkshadow#5844: you can do it.
buk#7792: look
buk#7792: http://prntscr.com/mef37f
buk#7792: i can pick that up today actually
pkkshadow#5844: yeah that one. they have it in black too.
buk#7792: yea they do
buk#7792: but you did it the other way
buk#7792: the one with the hoses and shit
buk#7792: and the bracket
pkkshad... |
buk#7792: ?
pkkshadow#5844: there are after market coolers, but arctic doesn't have a compatible cooler, (or i can't find one)
but <https://www.raijintek.com/en/products_detail.php?ProductID=46> is compatible
buk#7792: ..
Betrayed#3582: Pretty sure the strix uses stock mounting holes
pkkshadow#5844: but you need fans s... |
pkkshadow#5844: if you want to mount an aio
buk#7792: any recommendations ?
Betrayed#3582: Or get one of the air cooler ones
pkkshadow#5844: or you can pick up the morpheus II
Betrayed#3582: ^
Betrayed#3582: And some decent fans
pkkshadow#5844: arctic f12s will work
buk#7792: fans that you mount on the morpheus?
pkksha... |
pkkshadow#5844: yes
buk#7792: so water will just fall on case
pkkshadow#5844: unless there is a psu below it.
buk#7792: ...
buk#7792: so
Betrayed#3582: AIO leaks are super rare, but it's still a risk
buk#7792: 1. new heatsink (morpheus 2) + fans
OR
2. G12 BRACKET + AIO
pkkshadow#5844: number 1 personally.
buk#7792: h... |
buk#7792: yea
buk#7792: **overpriced**
pkkshadow#5844: i mean, open you case and add a desk fan would help
pkkshadow#5844: @Deleted User i don't know many in this server who have those laptops
pkkshadow#5844: afraid i can't help you there
buk#7792: @pkkshadow the glass panels feel super hot
buk#7792: and the exhaust is... |
pkkshadow#5844: i see you have good airflow
buk#7792: https://cdn.discordapp.com/attachments/305981966292090881/540258542230175775/image0.jpg
buk#7792: @Deleted User from 1070 to 2060 no
buk#7792: 970m to 2060, yes.
buk#7792: @pkkshadow do you think i just need a fan?
pkkshadow#5844: possible
buk#7792: and take off a ... |
pkkshadow#5844: @Maxwell Experience can you help this fellow out with his 980ti? temps are in the 80c range.
buk#7792: https://cdn.discordapp.com/attachments/305981966292090881/540260257440464896/video.mov
Deleted User#0000: 980ti's pretty old now, maybe it needs a repaste?
pkkshadow#5844: that was my first thought.
b... |
buk#7792: silver 5
Ducky The Duck#3078: ah it's decent
buk#7792: yea
buk#7792: unless you prefer
buk#7792: i go to microcenter and buy some top shelf
buk#7792: wax
Ducky The Duck#3078: lol
buk#7792: lol
pkkshadow#5844: just use decent paste
Ducky The Duck#3078: AC 5 is fine, the noctua paste is better but AC 5 ain't to... |
buk#7792: well
buk#7792: i guess
buk#7792: i gotta let it cool off
buk#7792: and
buk#7792: yea
buk#7792: thanks @Ducky The Duck @pkkshadow and whoever else pitched in sorry i dont see your name when using "@"
pkkshadow#5844: you're welcome.
pkkshadow#5844: hope we helped some
buk#7792: will update you guys later
Ducky ... |
pkkshadow#5844: unless they lied or something
buk#7792: https://cdn.discordapp.com/attachments/305981966292090881/540278189382041620/image0.jpg
buk#7792: https://cdn.discordapp.com/attachments/305981966292090881/540278241424965639/image0.jpg
buk#7792: @pkkshadow
hitek#9195: well yeah it conducts heat not electricity ... |
buk#7792: On the heat sink too or nah?
pkkshadow#5844: just on the gpu die.
pkkshadow#5844: and use even pressure when re-assembling the card.
Based Snake#8888: Damn you guys have actual thermal paste
Based Snake#8888: I use some cheap shiny paste that comes in small packets
pkkshadow#5844: i used to have some mx-2. bu... |
hitek#9195: like the char selection screen in a game
buk#7792: then capped it at 144
hitek#9195: sometimes that's when you will notice some coil whine too
buk#7792: Still loud
buk#7792: Yea
buk#7792: Heard that
buk#7792: @pkkshadow
pkkshadow#5844: ?
buk#7792: Shit meant to tag you in photo
buk#7792: One sec
buk#7792: h... |
buk#7792: 79%
buk#7792: fan speed
buk#7792: thinking the thermal paste
buk#7792: changed the temp by 4 degrees
buk#7792: cause it would sit at 83c in menu
buk#7792: now its somewhat consistent at 79c
buk#7792: http://prntscr.com/megusn
buk#7792: http://prntscr.com/megwcj
buk#7792: with effects on **low**
buk#7792: was ... |
DaGunzi#1241: hes capped at 144fps he said
DaGunzi#1241: so its not under full load
pkkshadow#5844: 🤔
buk#7792: i was just at fulload
buk#7792: it was 99% usage
buk#7792: and temps were going to high 70s
buk#7792: reverted settings and temps dropped as well as usage.
Deleted User#0000: I'm not sure there's a lot you c... |
DaGunzi#1241: performance was not his primary concern
Deleted User#0000: Typically if lowering voltage improves clocking, it's due to power limit throttling being reduced
DaGunzi#1241: no im really not talking about how far it could be pushed, im sure more was possible at 1.2v than 1.075v
DaGunzi#1241: just saying that... |
pkkshadow#5844: or ln2 pot
DaddySpaghetti#1199: getting a block for it will be pretty hard tbh
DaddySpaghetti#1199: you'll probably have to get it used if you want a full cover
DaddySpaghetti#1199: or something on aliexpress
DaddySpaghetti#1199: or one of EK's universal GPU blocks
DaddySpaghetti#1199: all assuming you'... |
DaddySpaghetti#1199: ah
DaddySpaghetti#1199: if you don't mind spending the money, then yea, it'll give you a boost
DaddySpaghetti#1199: what speeds are you running now?
Deleted User#0000: is the Arctic Accelero III a good deal/cooler?
Deleted User#0000: im at stock speeds
Deleted User#0000: its a stock 980 ti
DaddySpa... |
∫ntegral#0450: 980ti = 1070
∫ntegral#0450: you'd need a pretty big oc to match a 1080
Deleted User#0000: is it possible with a decent air cooler like the Arctic Accelero III?
DaddySpaghetti#1199: which is why i always tell people to just sell the 980ti and upgrade instead of spending all the extra money trying to cool ... |
buildzoid#6254: 2080ti BZE fse score https://imgur.com/gallery/1th8Rjc
Betrayed#3582: Do you have your score before any hard mods?
buildzoid#6254: like 300-400 GPU score less
buildzoid#6254: https://www.3dmark.com/3dm/32968285
CmonWithThat#9647: is oc scanner on msi afterburner good for ocing or should i do it manually... |
crs#1873: How much power overdraw? How much vcore headroom?
crs#1873: Fans at 100%?
Deleted User#0000: Whenever it crashes, the power draw will either spike or droop
Deleted User#0000: Fans at stock curve
crs#1873: Well, start with that in case you’re not using 100%
Deleted User#0000: ah oke so crank those bad bois up?... |
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/540528496154247169/Screenshot_182.png
crs#1873: Voltage
crs#1873: All the way to the right
crs#1873: It’s only the additional headroom that’s being used, it doesn’t mean 100% additional volts
crs#1873: Power also all the way to the right
crs#... |
crs#1873: for everyday use
Deleted User#0000: Will try 😃
crs#1873: such fun 😃
crs#1873: https://www.youtube.com/watch?v=FpmDa5VetME
crs#1873: watch this, it's a good video
Deleted User#0000: Watched it, still on 100% fan curve it’ll crash around 60c at 2115mhz
Deleted User#0000: Everything maxed out
Cautilus#5912: we... |
Mickulty#1560: tested for ability to run a certain speed
Mickulty#1560: though idk about 2080s/2080tis being in any way binned for speeds above stock
Mickulty#1560: it's not like there's a lower-end model to put 2080ti reject chips into
Mickulty#1560: or even 2080 rejects actually since the 2070 is a different chip
crs... |
I ❤ Azukinut#9705: like when does GPU boost max out anyways? Like what is the temp target for it stock where it will try its most agressive settings
Niobium#6334: Unfortunately that's also not a fixed number
Niobium#6334: Depends on the BIOS and workload
Niobium#6334: But typically it's either in the high 30s or the lo... |
Ultrachocobo#4928: Hey y'all I want to overclock my 2080 Dual OC from Asus via MSI Afterburner, any recommendations, I am new to oc
Deleted User#0000: @Ultrachocobo I’m not sure if that card will work with Precision X1, but give it a go
Deleted User#0000: Much better than afterburner
Deleted User#0000: Make sure the c... |
Deleted User#0000: Just need to figure out how to cool it to stay around 2080/2100
Ultrachocobo#4928: Can I put the powerlimit on max or is there any harm done by doing so?
Makikou#7777: no there is no harm
Makikou#7777: nvidia cards are foolproof in afterburner
Makikou#7777: except if you put your offsets too high and... |
Ultrachocobo#4928: I often read memory oc doesn't give you a benefit, true or false? Since I am new to oc'ing I just wonder
Makikou#7777: 2070 but yknow https://cdn.discordapp.com/attachments/305981966292090881/540603266967404557/unknown.png
Deleted User#0000: @Ultrachocobo Spent probably all day looking into memory OC... |
guardian_six#5058: moving this over from subzero-overclocking, sorry to butt in.
Ultrachocobo#4928: wtf is that even
guardian_six#5058: https://cdn.discordapp.com/attachments/305981966292090881/540607533555908658/CIMG0058.JPG
Deleted User#0000: @Makikou friend got 2080ti for 2080 price on evga sale
Makikou#7777: Proba... |
guardian_six#5058: https://cdn.discordapp.com/attachments/305981966292090881/540608128321060865/CIMG0062.JPG
guardian_six#5058: @Niobium What max voltage should I stop at? 2 volts?
Ground#4016: card looks fun 😄
guardian_six#5058: It was fun to mod
guardian_six#5058: only 6 USD on eBay
guardian_six#5058: trying to get... |
Niobium#6334: I generally play it by ear on the older stuff where info is scarce
Ground#4016: submitting to hwbot
guardian_six#5058: yep, planning on it
Niobium#6334: If mem is clocking worse than it did on ambient, keep cranking it
guardian_six#5058: depends on the scores I get today
guardian_six#5058: gotcha
guardian... |
Deleted User#0000: @crs any suggestions on how to dispel air around pcie brackets?
Deleted User#0000: no airflow is reaching and its super hot
crs#1873: Oof
crs#1873: Another fan?🙈
Deleted User#0000: @crs the psu is blocking airflow there oofx2
Deleted User#0000: was thinking a tiny 80mm fan as an outtake
crs#1873: Yi... |
DaddySpaghetti#1199: mounts to the PCI brackets
Mickulty#1560: can also get a "system blower"
Mickulty#1560: https://www.ebay.co.uk/itm/System-PCI-Slot-Blower-CPU-Case-DC-Cooling-Fan-12v-4pin-Cooler-For-PC-Laptop-DAZ/264103153106 for example
DaddySpaghetti#1199: oh yea, that's easier and cheaper
Mickulty#1560: depends ... |
DaddySpaghetti#1199: oooh
Deleted User#0000: the other one linked was just an example bc diagram
DaddySpaghetti#1199: you can probably mount a 120mm directly to the bottom of the psu cover area
Deleted User#0000: Really? even though theres the psu right underneath
DaddySpaghetti#1199: do it just in front of it
DaddySpa... |
DaddySpaghetti#1199: Wait. Are you saying the gpu is 63 or the pci-e slot is measuring 63
Deleted User#0000: Oh sorry the actual pcie slot?
Deleted User#0000: GPU - 63/60c
Slot - 42c
Alcyone#2233: youre nprobably gonna need a morpheus or aio to get the gpu temps to the 50s or lower
DaddySpaghetti#1199: Yea.
Alcyone#22... |
DaddySpaghetti#1199: and it might drop it a few degrees
Alcyone#2233: Test with the side panel off and see if temps improve, I don't think its got airflow issues, temps seem in line for a stock cooler
Ground#4016: make sure the coldplate is large enough
Deleted User#0000: Took the side panel off and you can feel the ho... |
Deleted User#0000: Should be okay, old building but vacuumed today
DaddySpaghetti#1199: so basically, if you point a big fan at it,and you're still getting the same temps, then you're gonna need water
Deleted User#0000: Does this mean a fancy EK waterblock and custom loop
Deleted User#0000: pls not wallet
Deleted User#... |
Deleted User#0000: yeah aus
DaddySpaghetti#1199: all you had to say was 27C at night, haha
Deleted User#0000: oh lol its 4am and i was rlly going ham on this oc thing
Alcyone#2233: It's always hot in my loft. You can slap a bigass air cooler on the gpu and get decent temps. or get a kraken g12 bracket and an aio, but i... |
DaddySpaghetti#1199: haha yea, sorry was referring to just mounting an AIO onto a GPU
Alcyone#2233: hardline is pure looks though and can make changing any hardware a real job
Deleted User#0000: man it looks so good though
Deleted User#0000: was just about to complain about prices of sleeved cables then realized water ... |
Deleted User#0000: Asus have their own OC utility
Ultrachocobo#4928: Yeah I use the Asus Software since afterburner crashes for me
Ultrachocobo#4928: still even 10 more on clock and I see artifacts in firestrike
Deleted User#0000: Managed to hit 2130mhz at 42c with this 2080 XC Ultra
Deleted User#0000: Overall is aroun... |
DaddySpaghetti#1199: You can look into one of those beefy aftermarket fan based coolers, but I’m not sure how much that’ll drop the temps.
Betrayed#3582: Not a ton, the XC Ultra is already 3 slots
Deleted User#0000: liquid 😟
Deleted User#0000: If you’re going to shove a water block on, wouldn’t you go for the cheapest... |
Betrayed#3582: Fullcover block $150
Radiator $50-100
Pump / res combo $100
Fittings / tubing is cheaper if you go soft
Deleted User#0000: Always fighting against high ambient temps here
Deleted User#0000: Around 20c winter 30-35c summer
DaddySpaghetti#1199: def water
DaddySpaghetti#1199: everyone is saying water
Dad... |
Betrayed#3582: Maybe with a new BIOS + shunt mod
DaddySpaghetti#1199: shunt might work
DaddySpaghetti#1199: but heat though
Betrayed#3582: You might be able to mantain 2130mhz on water with enough rads
Deleted User#0000: 2130 is around maybe 45c, 2100 maybe up to 59c
DaddySpaghetti#1199: yea
Betrayed#3582: But that is ... |
Betrayed#3582: Soft tubing isn't very difficult
Betrayed#3582: Hard tubing bending is the hard part
DaddySpaghetti#1199: my build was soft tubing
DaddySpaghetti#1199: it can still look good
DaddySpaghetti#1199: even an NZXT G12 with an AIO would be fine
LLugnuto779#9411: what about using soft tubes inside sections of ... |
Deverox#9461: I really want to Shunt mod/WC my RTX titan =\
I ❤ Azukinut#9705: Well as Buildzoid Said about the 2080ti BZE the current balance crap on Founders Editions make that practicaly impossible. (The shunt mods)
Tho watercooling sounds lovely
LLugnuto779#9411: i meant running a soft tube inside of a hard tube b... |
ALitLight#6938: Ik
4a61636b#5675: Cards work differently, my 1070 sc BE does 2150
∫ntegral#0450: just run oc scanner if you don't know how to manually oc
ALitLight#6938: I heard it’s not recommended
ALitLight#6938: My best manual clock is 1800
∫ntegral#0450: that's stock?
ALitLight#6938: No stock is 1607
ALitLight#6938... |
∫ntegral#0450: you can't go over 1.093v
ALitLight#6938: Okay
ALitLight#6938: So you are saying if I unlock voltage I can push the clocks a bit more?
∫ntegral#0450: yeah
ALitLight#6938: Okay thanks
∫ntegral#0450: but be aware of power throttling
ALitLight#6938: Okay
Deleted User#0000: Manged to get 2100/2085 under 65c s... |
adi769#6854: seems to be similar story
DaddySpaghetti#1199: yea, you might gain like 1 or 2 steps
DaddySpaghetti#1199: so like 25mhz
guardian_six#5058: I need some helpful input on benching 3DMark 2001 SE. Thus far, I have not touched LOD, but now I want to see what difference it makes. Which setting is it in AMD drive... |
adi769#6854: and a D15.. direct die.. With some weird mounting.. *Anxiety*
esmth#2213: i was strongly considering direct die mounting my d14 on my 3770k pc
esmth#2213: all you'd need to do is shorten the plastic standoffs the height of the removed IHS
hitek#9195: gravity mounting >
DaddySpaghetti#1199: Support it from ... |
AceTheBase#9288: how would I go on about OCing
AceTheBase#9288: if there is a video that you can link me to that has the same software for OCing that would be appreciated
Deleted User#0000: https://cdn.discordapp.com/attachments/305981966292090881/541171975326793748/Screenshot_209.png
Deleted User#0000: with Precision... |
Deleted User#0000: hey
Deleted User#0000: you got precision x1 up?
AceTheBase#9288: yes
AceTheBase#9288: i got precision x1
Deleted User#0000: cool. If you click the grey arrows you’ll find VF curve tuner
Deleted User#0000: Click ‘scan’ and it should give you an auto OC
Deleted User#0000: takes about 20min
AceTheBase#9... |
AceTheBase#9288: alright
Deleted User#0000: Make sure your temps aren’t over 75c
AceTheBase#9288: thanks man
AceTheBase#9288: kk
Deleted User#0000: No worries, any questions let me know
AceTheBase#9288: sure
AceTheBase#9288: ty
AceTheBase#9288: It’s now running right? https://cdn.discordapp.com/attachments/305981966292... |
Skiptrace#4386: This isn't really nessisarily GPU Overclocking based, but I can't get NVFlash to work for me to update the BIOS of my GTX 1070...
Skiptrace#4386: Every time I try to enter a command it gives me another line of helptext
Snaky115#4135: ^ already fixed in general chat
Deleted User#0000: Any tips on overclo... |
∫ntegral#0450: did you overclock before?
Deleted User#0000: No
Deleted User#0000: This is my first try
Deleted User#0000: It says that when I hard reset
Deleted User#0000: Or when my CPU freezes
Deleted User#0000: @∫ntegral Should I bump up clock to +10mhz each test?
Deleted User#0000: I have Unigine Heaven, Tomb Raide... |
∫ntegral#0450: back down by 10
∫ntegral#0450: it shouldn't tho
Deleted User#0000: Okay
∫ntegral#0450: pretty sure the gts is a binned gpu
∫ntegral#0450: http://xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p8dbd6
∫ntegral#0450: you sure it's 1366 stock?
∫ntegral#0450: says here it's 1405
... |
Deleted User#0000: What does this mean?
∫ntegral#0450: http://www.xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p8dfd6
Deleted User#0000: Oh
∫ntegral#0450: the cooler looks better than the black wolf version
Deleted User#0000: So Black Core and XXX is different?
∫ntegral#0450: yeah
Delete... |
∫ntegral#0450: possibly
∫ntegral#0450: but there'd be no gains
∫ntegral#0450: it wouldn't be any different than manually overclocking
∫ntegral#0450: and you have a risk of bricking it
∫ntegral#0450: which is recoverable if you have a spare gpu
Deleted User#0000: Okay
Deleted User#0000: What are the max temps for an RX ... |
Deleted User#0000: Where do I check this?
∫ntegral#0450: in msi ab
∫ntegral#0450: there's a fan slider at the bottom
Deleted User#0000: Percent or RPM?
∫ntegral#0450: percent
Deleted User#0000: How do I use Afterburner inside Unigine?
∫ntegral#0450: dont think it's possible with the free version of superposition
Delete... |
Deleted User#0000: Min 68
Deleted User#0000: Average 74
Deleted User#0000: Is this good?
∫ntegral#0450: it's alright
Deleted User#0000: I am currently running at 1405
Deleted User#0000: Bump up to 1410?
Deleted User#0000: @∫ntegral Witcher 3: Max 85
Deleted User#0000: Is this good?
Deleted User#0000: This seems to be a... |
Deleted User#0000: Holy shit
Deleted User#0000: 88
∫ntegral#0450: i'd recommend setting a manual fan speed for starters
∫ntegral#0450: set one that you can stand
Deleted User#0000: Okay
Deleted User#0000: Crash!
Deleted User#0000: @∫ntegral
Deleted User#0000: The game crashed
Deleted User#0000: Why did this happen?
∫nt... |
Deleted User#0000: Can I just set it to 1400?
∫ntegral#0450: sure
Deleted User#0000: Okay
Deleted User#0000: And is Witcher 3 a gpu intensive game?
∫ntegral#0450: yeah
Deleted User#0000: Should I also test out GTA V?
∫ntegral#0450: yeah why not
∫ntegral#0450: the more games you test, the better chance you have of findi... |
∫ntegral#0450: if you could lower temps, it might help with stability
Deleted User#0000: So should I undervolt or underclock?
Deleted User#0000: It crashed at 83c
Deleted User#0000: I am testing without GPU OC to see if this is the CPU OC issue
∫ntegral#0450: well those temps are pretty high
∫ntegral#0450: go back to s... |
∫ntegral#0450: possibly
∫ntegral#0450: is your gpu at stock?
Deleted User#0000: Yes
∫ntegral#0450: yeah then it's probably your cpu
Deleted User#0000: What should I do to CPU?
∫ntegral#0450: drop the ratio by like 0.5
Deleted User#0000: @∫ntegral The clockspeed?
Deleted User#0000: Or the voltage?
∫ntegral#0450: clock s... |
Deleted User#0000: Is Witcher 3 a stable game?
Deleted User#0000: It always crashes on the tavern scene
∫ntegral#0450: it might be a driver issue
∫ntegral#0450: idk tho
∫ntegral#0450: i don't play it
Deleted User#0000: crashed
Deleted User#0000: again
DaddySpaghetti#1199: Does it crash when everything is back to stock ... |
Deleted User#0000: Where do I see the latest events?
Deleted User#0000: Help
∫ntegral#0450: event viewer
Deleted User#0000: What do I click in event viewer
DaddySpaghetti#1199: You can look under Windows logs
Deleted User#0000: I see perflib warnings
DaddySpaghetti#1199: I will tell you that you can’t break Event viewe... |
DaddySpaghetti#1199: Don’t worry about it then for now
Deleted User#0000: Warning source is System32
DaddySpaghetti#1199: A driver crash is usually a warning
Deleted User#0000: Is Witcher 3 an unstable game?
DaddySpaghetti#1199: Not in my experience
Deleted User#0000: Can I trust that game?
Deleted User#0000: Which gam... |
Deleted User#0000: Also can I talk about torrents here?
Deleted User#0000: And btw I installed it using the GOG game installer
DaddySpaghetti#1199: No
DaddySpaghetti#1199: That’s rule 3
Deleted User#0000: Okay
Deleted User#0000: Why is it so hard to benchmark if I don't play games?
Betrayed#3582: Games are common loads... |
hitek#9195: it does some opencl but do some real stuff like 3dmark/superposition/heaven/valley
hitek#9195: and actual games
Deleted User#0000: I cannot afford games right now
Deleted User#0000: All I have is a Witcher 3 copy from a friend
DaddySpaghetti#1199: Why can’t you just run some test renders though
hitek#9195: ... |
Deleted User#0000: Okay
Deleted User#0000: So should I run 3DMark Demo, Valley, Heaven, Superposition, RealBench, and Blenchmark?
Deleted User#0000: Should I run all of these?
Deleted User#0000: And how many times?
Deleted User#0000: As much as you’d like.
Deleted User#0000: Usually you can find pretty easily if it’s u... |
Cautilus#5912: uhhhhhh well GPU OC is pretty straight-forward
Cautilus#5912: but I don't have any experience with polaris myself
Cautilus#5912: basically you just keep raising the clocks, whilst running a benchmark on loop like unigine heaven, until it crashes
Deleted User#0000: Should I set power limit to max?
Cautilu... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.