schema stringclasses 471
values | key stringlengths 0 203 | description stringlengths 0 4.37k | object stringlengths 2 322k |
|---|---|---|---|
calqulus-pipeline.schema.json | acceleration | Derives the input signal to the second order.
Note: _Due to the temporal nature of this operation, the resulting first and last frames will be null._
Note: _This operation will split the series on gaps and derive each "slice" individually. The first and last frame on each "slice" will be null._ | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Derives the input signal to the order defined in input 2. If input 2 is not set, the signal is derived to order 1.
Only the first and second order is supported.
Note: _Due to the temporal nature of this operation, the resulting first and last frames will be null._
Note: _This operation will split the series on gaps ... | {"type": "object", "properties": {"derivative": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["derivative"]} |
calqulus-pipeline.schema.json | derivative | Derives the input signal to the order defined in input 2. If input 2 is not set, the signal is derived to order 1.
Only the first and second order is supported.
Note: _Due to the temporal nature of this operation, the resulting first and last frames will be null._
Note: _This operation will split the series on gaps ... | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Derives the input signal to the first order.
Note: _Due to the temporal nature of this operation, the resulting first and last frame will be null._
Note: _This operation will split the series on gaps and derive each "slice" individually. The first and last frame on each "slice" will be null._ | {"type": "object", "properties": {"velocity": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["velocity"]} |
calqulus-pipeline.schema.json | velocity | Derives the input signal to the first order.
Note: _Due to the temporal nature of this operation, the resulting first and last frame will be null._
Note: _This operation will split the series on gaps and derive each "slice" individually. The first and last frame on each "slice" will be null._ | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Runs a Butterworth IIR high-pass filter over the input data. | {"type": "object", "properties": {"highpass": {"additionalProperties": false, "type": ["string", "array", "null"]}, "extrapolate": {"additionalProperties": false, "type": ["string", "number"]}, "iterations": {"additionalProperties": false, "type": ["string", "number"]}, "cutoff": {"additionalProperties": false, "type":... |
calqulus-pipeline.schema.json | highpass | Runs a Butterworth IIR high-pass filter over the input data. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | extrapolate | Extrapolation buffer. Defines how many frames to add on either side of the series, useful if the filter handles the edges of the series strangely.
Leading and trailing NaN values are removed before extrapolation, i.e., extrapolation begins from the first and last real value. NaN values are then re-inserted in the orig... | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | iterations | Defines how many times to apply the filter in sequence. If the iterations is set to anything other than 1, the filter will be applied multiple times, using the output of the previous iteration as the input for the next. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | cutoff | Defines around what frequency to limit the filter. The filter will attenuate frequencies below this value. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | order | Defines the filter order. The higher the order, the steeper the attenuation slope will be. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | items | Runs a Butterworth IIR low-pass filter over the input data. | {"type": "object", "properties": {"lowpass": {"additionalProperties": false, "type": ["string", "array", "null"]}, "extrapolate": {"additionalProperties": false, "type": ["string", "number"]}, "iterations": {"additionalProperties": false, "type": ["string", "number"]}, "cutoff": {"additionalProperties": false, "type": ... |
calqulus-pipeline.schema.json | lowpass | Runs a Butterworth IIR low-pass filter over the input data. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | extrapolate | Extrapolation buffer. Defines how many frames to add on either side of the series, useful if the filter handles the edges of the series strangely.
Leading and trailing NaN values are removed before extrapolation, i.e., extrapolation begins from the first and last real value. NaN values are then re-inserted in the orig... | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | iterations | Defines how many times to apply the filter in sequence. If the iterations is set to anything other than 1, the filter will be applied multiple times, using the output of the previous iteration as the input for the next. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | cutoff | Defines around what frequency to limit the filter. The filter will attenuate frequencies above this value. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | order | Defines the filter order. The higher the order, the steeper the attenuation slope will be. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | items | Outputs the arc cosine (or inverse cosine) for each value in the input signal. | {"type": "object", "properties": {"acos": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["acos"]} |
calqulus-pipeline.schema.json | acos | Outputs the arc cosine (or inverse cosine) for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the arcsine (or inverse sine) for each value in the input signal. | {"type": "object", "properties": {"asin": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["asin"]} |
calqulus-pipeline.schema.json | asin | Outputs the arcsine (or inverse sine) for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the arctangent (or inverse sine) for each value in the input signal. | {"type": "object", "properties": {"atan": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["atan"]} |
calqulus-pipeline.schema.json | atan | Outputs the arctangent (or inverse sine) for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the the angle (in radians) from the X axis to a point for each value in the input signal. | {"type": "object", "properties": {"atan2": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["atan2"]} |
calqulus-pipeline.schema.json | atan2 | Outputs the the angle (in radians) from the X axis to a point for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the cosine for each value in the input signal. | {"type": "object", "properties": {"cos": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["cos"]} |
calqulus-pipeline.schema.json | cos | Outputs the cosine for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the hyperbolic cosine for each value in the input signal. | {"type": "object", "properties": {"cosh": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["cosh"]} |
calqulus-pipeline.schema.json | cosh | Outputs the hyperbolic cosine for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the cotangent for each value in the input signal. | {"type": "object", "properties": {"cotan": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["cotan"]} |
calqulus-pipeline.schema.json | cotan | Outputs the cotangent for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the sine for each value in the input signal. | {"type": "object", "properties": {"sin": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["sin"]} |
calqulus-pipeline.schema.json | sin | Outputs the sine for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the hyperbolic sine for each value in the input signal. | {"type": "object", "properties": {"sinh": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["sinh"]} |
calqulus-pipeline.schema.json | sinh | Outputs the hyperbolic sine for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the tangent for each value in the input signal. | {"type": "object", "properties": {"tan": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["tan"]} |
calqulus-pipeline.schema.json | tan | Outputs the tangent for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Outputs the hyperbolic tangent for each value in the input signal. | {"type": "object", "properties": {"tanh": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["tanh"]} |
calqulus-pipeline.schema.json | tanh | Outputs the hyperbolic tangent for each value in the input signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Runs a logical expression. The return value is determined by the result of the expression, and the then and else options.
The following operators are supported:
>=
Parentheses can be used to influence the order of evaluation.
Only numbers and single-element arrays can be part of the expression. | {"type": "object", "properties": {"if": {"additionalProperties": false, "type": ["string", "array", "null"]}, "then": {"additionalProperties": false}, "else": {"additionalProperties": false}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["if", "then", "else"]} |
calqulus-pipeline.schema.json | if | Runs a logical expression. The return value is determined by the result of the expression, and the then and else options.
The following operators are supported:
>=
Parentheses can be used to influence the order of evaluation.
Only numbers and single-element arrays can be part of the expression. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | then | {"additionalProperties": false} | |
calqulus-pipeline.schema.json | else | {"additionalProperties": false} | |
calqulus-pipeline.schema.json | items | Imports an event by name. | {"type": "object", "properties": {"event": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["event"]} |
calqulus-pipeline.schema.json | event | Imports an event by name. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Generic import of any input by name. | {"type": "object", "properties": {"import": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["import"]} |
calqulus-pipeline.schema.json | import | Generic import of any input by name. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | Imports a marker series by name or creates a new signal with a custom origin. | {"type": "object", "properties": {"marker": {"additionalProperties": false, "type": ["string", "array", "null"]}, "origin": {"additionalProperties": false, "type": ["string", "array"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["marker"]} |
calqulus-pipeline.schema.json | marker | Imports a marker series by name or creates a new signal with a custom origin. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | origin | This option can be used to create a new marker signal, with a custom x, y and z coordinate. | {"additionalProperties": false, "type": ["string", "array"]} |
calqulus-pipeline.schema.json | items | Imports a segment series by name. | {"type": "object", "properties": {"segment": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["segment"]} |
calqulus-pipeline.schema.json | segment | Imports a segment series by name. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | This step takes 2 event inputs and outputs an array of durations (in seconds).
Inputs 1 and 2 will be combined into pairs - from values in input 1 to values in input 2.
The duration is calculated using the frame rate from either the "from", or "to" input event. | {"type": "object", "properties": {"eventDuration": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["eventDuration"]} |
calqulus-pipeline.schema.json | eventDuration | This step takes 2 event inputs and outputs an array of durations (in seconds).
Inputs 1 and 2 will be combined into pairs - from values in input 1 to values in input 2.
The duration is calculated using the frame rate from either the "from", or "to" input event. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | This is a step which takes a signal and 2 event inputs and outputs a filtered signal with values only appearing in between the events.
Inputs 2 and 3 will be combined into pairs from values in input 2 to values in input 3.
These pairs can be used to filter the values in input 1.
These event pairs, or cycles are also... | {"type": "object", "properties": {"eventMask": {"additionalProperties": false, "type": ["string", "array", "null"]}, "keep": {"additionalProperties": false, "type": ["string", "number", "array"]}, "replacement": {"additionalProperties": false, "type": ["string", "number"]}, "truncate": {"additionalProperties": false, "... |
calqulus-pipeline.schema.json | eventMask | This is a step which takes a signal and 2 event inputs and outputs a filtered signal with values only appearing in between the events.
Inputs 2 and 3 will be combined into pairs from values in input 2 to values in input 3.
These pairs can be used to filter the values in input 1.
These event pairs, or cycles are also... | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | keep | An index or an array of indices of events in each cycle to keep. This allows you to keep only a subset of event instances in each cycle.
Negative numbers can be used to count from the end of the cycle, e.g. -1 is the last event in the cycle.
Note: This only applies to event inputs. | {"additionalProperties": false, "type": ["string", "number", "array"]} |
calqulus-pipeline.schema.json | replacement | Replacement value to use for masked values. If not set, masked values will be removed from the output signal.
The replacement property has no effect when the signal input is an event. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | truncate | Whether or not the signal should be truncated, i.e., if values that were not within an "event pair" should be removed or not.
This will only apply if replacement does not have a value. | {"additionalProperties": false, "type": ["string", "boolean"]} |
calqulus-pipeline.schema.json | items | This step takes an event input and converts each frame value to a time value (in seconds).
The time is calculated using the frame rate from the signal. | {"type": "object", "properties": {"eventTime": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["eventTime"]} |
calqulus-pipeline.schema.json | eventTime | This step takes an event input and converts each frame value to a time value (in seconds).
The time is calculated using the frame rate from the signal. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | This step allows you to easily pick out frames from an event only when they appear in a specific sequence of other events.
The main input of this step is the event you want to select frames from.
The required option sequence defines a sequence of events to happen in order. This option requires at least one instance o... | {"type": "object", "properties": {"refineEvent": {"additionalProperties": false, "type": ["string", "array", "null"]}, "sequence": {"additionalProperties": false, "type": ["string", "array"]}, "exclude": {"additionalProperties": false, "type": ["string", "array"]}, "cyclic": {"additionalProperties": false, "type": ["st... |
calqulus-pipeline.schema.json | refineEvent | This step allows you to easily pick out frames from an event only when they appear in a specific sequence of other events.
The main input of this step is the event you want to select frames from.
The required option sequence defines a sequence of events to happen in order. This option requires at least one instance o... | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | sequence | A sequence of events. This must include at least one instance of the main input event. | {"additionalProperties": false, "type": ["string", "array"]} |
calqulus-pipeline.schema.json | exclude | Event(s) that will invalidate an event sequence if found within it. | {"additionalProperties": false, "type": ["string", "array"]} |
calqulus-pipeline.schema.json | cyclic | Whether or not to treat sequences as cyclic (true as default). | {"additionalProperties": false, "type": ["string", "boolean"]} |
calqulus-pipeline.schema.json | items | Find peaks inside a signal based on peak properties.
At first, it will detect any peak-like features in the signal. If any of the options distance, height, prominence, or width is defined, it will use those properties to filter out peaks that match the criteria.
As a last step, if the sequence option is used, it will... | {"type": "object", "properties": {"peakFinder": {"additionalProperties": false, "type": ["string", "array", "null"]}, "distance": {"additionalProperties": false, "type": ["string", "number", "array"]}, "height": {"additionalProperties": false, "type": ["string", "number", "array"]}, "prominence": {"additionalProperties... |
calqulus-pipeline.schema.json | peakFinder | Find peaks inside a signal based on peak properties.
At first, it will detect any peak-like features in the signal. If any of the options distance, height, prominence, or width is defined, it will use those properties to filter out peaks that match the criteria.
As a last step, if the sequence option is used, it will... | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | distance | Required minimal horizontal distance (>= 1) in samples between neighbouring peaks.
Smaller peaks are removed first until the condition is fulfilled for all remaining peaks. | {"additionalProperties": false, "type": ["string", "number", "array"]} |
calqulus-pipeline.schema.json | height | Required height of peaks. Either a number or a 2-element array. The first element is always interpreted as the minimal and the second, if supplied, as the maximal required height. | {"additionalProperties": false, "type": ["string", "number", "array"]} |
calqulus-pipeline.schema.json | prominence | Required prominence of peaks. Either a number or a 2-element array. The first element is always interpreted as the minimal and the second, if supplied, as the maximal required prominence. | {"additionalProperties": false, "type": ["string", "number", "array"]} |
calqulus-pipeline.schema.json | relHeight | Used for calculation of the peaks width, thus it is only used if width is given.
Chooses the relative height at which the peak width is measured as a percentage of its prominence. 1.0 calculates the width of the peak at its lowest contour line while 0.5 evaluates at half the prominence height. Must be at least 0. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | sequence | Allows to classify peaks using a pattern and select peaks from the pattern to use as the output.
See below for further information. | {"additionalProperties": false, "type": ["object"], "properties": {"ranges": {"additionalProperties": false, "type": ["string"]}, "pattern": {"additionalProperties": false, "type": ["string"]}, "keep": {"additionalProperties": false, "type": ["string", "array"]}}} |
calqulus-pipeline.schema.json | ranges | Classification of the peak heights. This option expects a string consisting of 1-character labels separated by a boundary value.
The boundary values represent a percentage between 0 – 100 which defined the end of the previous label's range and the beginning of the next label's range.
The entire range 0 – 100 represen... | {"additionalProperties": false, "type": ["string"]} |
calqulus-pipeline.schema.json | pattern | A pattern describing a sequence of classified peak heights using the labels defined in the ranges option.
If you have supplied the ranges string L 50 H, and you want to find the following sequence of peaks: "a low peak followed by a low peak followed by a high peak, you can define the pattern as LLH.
Each matching pa... | {"additionalProperties": false, "type": ["string"]} |
calqulus-pipeline.schema.json | keep | An array of indices from the pattern labels to keep in the output. The index is zero-based, i.e., the first item in the sequence pattern is 0, the last in the sequence is the (length of the pattern) - 1.
If the pattern was defined as LLH and we wanted to keep only the first (low) peak in each matching sequence, we wou... | {"additionalProperties": false, "type": ["string", "array"]} |
calqulus-pipeline.schema.json | width | Required width of peaks in samples. Either a number or a
2-element array. The first element is always interpreted as the minimal and the second, if supplied, as the maximal required width. | {"additionalProperties": false, "type": ["string", "number", "array"]} |
calqulus-pipeline.schema.json | window | Used for calculation of the peaks prominences, thus it is only used if one of the arguments prominence or width is given.
A window length in samples that optionally limits the evaluated area for each peak to a subset of x. The peak is always placed in the middle of the window therefore the given length is rounded up t... | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | items | This step will register an event for every frame where the signal passes the specified threshold value.
By default, an event is registered when the signal crosses the threshold in either an ascending or descending direction.
By configuring the direction option, you can specify a certain direction that will trigger th... | {"type": "object", "properties": {"threshold": {"additionalProperties": false, "type": ["string", "array", "null"]}, "value": {"additionalProperties": false, "type": ["string", "number"]}, "direction": {"additionalProperties": false, "type": ["string"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ... |
calqulus-pipeline.schema.json | threshold | This step will register an event for every frame where the signal passes the specified threshold value.
By default, an event is registered when the signal crosses the threshold in either an ascending or descending direction.
By configuring the direction option, you can specify a certain direction that will trigger th... | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | value | The threshold value to use. | {"additionalProperties": false, "type": ["string", "number"]} |
calqulus-pipeline.schema.json | direction | The direction of crossing the threshold to record. | {"additionalProperties": false, "type": ["string"]} |
calqulus-pipeline.schema.json | items | The concatenate step takes any number of inputs (at least 2) of the same (or equivalent) types and appends the values into one output. This will be done on each component, if they exist. | {"type": "object", "properties": {"concatenate": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["concatenate"]} |
calqulus-pipeline.schema.json | concatenate | The concatenate step takes any number of inputs (at least 2) of the same (or equivalent) types and appends the values into one output. This will be done on each component, if they exist. | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | items | The vector step takes one or three inputs and outputs a vector sequence signal.
If given three numeric or 1-dimensional series inputs, each input will be assigned to the x, y, and z components, respectively.
Alternatively, if only one input is given and it contains at least three components, the first three component... | {"type": "object", "properties": {"vector": {"additionalProperties": false, "type": ["string", "array", "null"]}, "export": {}, "output": {}, "set": {}, "space": {}}, "required": ["vector"]} |
calqulus-pipeline.schema.json | vector | The vector step takes one or three inputs and outputs a vector sequence signal.
If given three numeric or 1-dimensional series inputs, each input will be assigned to the x, y, and z components, respectively.
Alternatively, if only one input is given and it contains at least three components, the first three component... | {"additionalProperties": false, "type": ["string", "array", "null"]} |
calqulus-pipeline.schema.json | where | When importing a signal or defining an output node, you can specify a measurement from which the signal should be imported – or for which measurement an output node should run.
You can filter measurements by name and by field values and you can use wildcard characters `*` to formulate patterns to match partial values.... | {"type": "object", "properties": {"name": {"type": "string"}, "index": {"type": ["integer", "string"], "if": {"type": "string"}, "then": {"enum": ["first", "last"]}}, "fields": {"type": "object", "additionalProperties": {"type": "string"}}}, "additionalProperties": false} |
calqulus-pipeline.schema.json | name | Target a measurement by name | {"type": "string"} |
calqulus-pipeline.schema.json | index | Out of a number of matching measurements, pick the nth match. Either a 1-based index, or the values `first` or `last` to select the first or last match, respectively. | {"type": ["integer", "string"], "if": {"type": "string"}, "then": {"enum": ["first", "last"]}} |
calqulus-pipeline.schema.json | fields | Target a measurement by a field value. | {"type": "object", "additionalProperties": {"type": "string"}} |
calqulus-pipeline.schema.json | set | Used to specify which _set_ the exported parameter will use. In most cases, this will be either `left` or `right`.
If not set, the JSON output will use set: null. | {"type": "string"} |
calqulus-pipeline.schema.json | spaceOrigin | Sets the origin of a custom coordinate system. | {"type": ["string", "array"]} |
calqulus-pipeline.schema.json | spacePrimaryAxis | Sets the primary axis of a custom coordinate system. The primary axis of the custom coordinate system will always be a unit vector with the same direction as this vector.
If more than one vectors is given, for example [myMarker1, myMarker2], the vector difference between the first two vectors is used as the primar... | {"type": ["string", "array"]} |
calqulus-pipeline.schema.json | spaceSecondaryAxis | Sets the secondary axis of a custom coordinate system. The actual secondary axis of the custom coordinate system might differ from the vector specified, since the secondary axis must be a unit vector perpendicular to the primary axis.
If more than one vectors is given, for example [myMarker1, myMarker2], the vecto... | {"type": ["string", "array"]} |
calqulus-pipeline.schema.json | spaceOrder | Defines what axis the primary and secondary axis corresponds to. The first letter defines the name of the primary axis, and the second letter defines the name of the secondary axis.
Possible values:
xy - Primary axis: x, secondary axis: y
yx - Primary axis: y, secondary axis: x
xz - Primary axis: x, secondary axis... | {"type": "string", "enum": ["xy", "yx", "xz", "yz", "zy"]} |
calqulus-pipeline.schema.json | spaceAlignWithSegment | Used to create a space that aligns with the specified segment. The resulting space will be rotated in 90 degree increments relative to the world space.
The rotation is based on the average orientation of the segment during a measurement. | {"type": ["object"], "properties": {"segment": {"type": "string"}}, "required": ["segment"]} |
calqulus-pipeline.schema.json | segment | Used to create a space that aligns with the specified segment. The resulting space will be rotated in 90 degree increments relative to the world space.
The rotation is based on the average orientation of the segment during a measurement. | {"type": "string"} |
calqulus-pipeline.schema.json | Parameter Node | A parameter node defines steps used to calculate a value or a sequence of values. The result is exported to the global scope and exported in the resulting JSON file. | {"type": "object", "properties": {"parameter": {}, "steps": {}, "where": {}, "set": {}}, "required": ["parameter", "steps"], "additionalProperties": false} |
calqulus-pipeline.schema.json | globalOption export | If this option is set, the result of this step will be exposed on the global scope, as well as being exported to the resulting JSON file.
The value of this option will be the name of the exported data and can be used to load the resulting data in other steps. | {"additionalProperties": false, "type": ["string"], "name": "export"} |
calqulus-pipeline.schema.json | globalOption output | If this option is set, the result of this step will be exposed on the local scope.
The value of this option will be the name of the output data and can be used to load the resulting data in other steps within the same output node.
You can also use the short-form "arrow syntax" to define an output. | {"additionalProperties": false, "type": ["string"], "name": "output"} |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.