text stringlengths 0 41.8k | label stringlengths 5 23 | dataType stringclasses 2
values | communityName stringlengths 5 23 | datetime stringclasses 32
values |
|---|---|---|---|---|
How much did you end up paying for that | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Do you have any experience in dealing with watch modifications and the necessary tools? If not, then you’d better leave it alone. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
I can do basic stuff. I’ve disassembled and reassembled a movement before. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
About $2400, which isn’t bad considering the cost of the Gen parts involved. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
The dial could definitely be rotated slightly by loosening the movement clamps. The crystal alignment can be sorted too but that's a bit more work as you'll have to remove the bezel and movement before pressing out the crystal. You'll also need a custom die to repress the crystal retaining ring back on. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Thanks, this is helpful!
My concern about adjusting only the dial is that the crystal is badly misaligned with the case - the dial in its current position is actually kinda halfway aligned between the case and the crystal. So if I only fix the dial alignment, it's gonna look worse, not better.
I'm OK with removing ... | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
True, but if you want to be happy then that crystal has to fixed. RWI has plenty of info on how to remove and refit the crystal and bezel. You will probably also need a new hytrel gasket for the bezel as they are quite often damaged when removing the bezel. They can be found on Aliexpress. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Would I have to realign the date wheel too when I align the dial? | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
You wouldn't be aligning the dial as such. You'd be rotating the movement slightly to get the dial to line up with the rehaut. There's normally a bit of play in both directions when clamping the movement to the case. Do it with the stem in place but not screwed down so you know the limits of how far you can rotate it. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Awesome. Thank you! | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
If you've got the money for this why would you not save up more and buy a gen? | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Fair question. I own a bunch of gens. The difference between a $2400 Frankenstein and a $12000 Gen is, for me, the difference between an impulse purchase and something I’d have to budget for. Everybody’s different though. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Yeah, I see your point. Everybody is different mate, all that really does matter is if you're happy. Got any other Franks? | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
It really depends if the rehaut engravings are good to start off with ,as if you rotate the movement& dial to match with rehaut may give unnecessary force to the stem and you don't want that , over time it will compromise the keyless works . | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Yep. I’ve got an AP RO 15400OR with a Gen dial, for instance. It’s fun. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Yeah I’m a bit worried about that. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Rotate the crystal sure but I’d probably leave the rest alone because even gen Rolex has rehaut alignment issues and it’s never fun chasing that perfection when it might be unattainable. Make sure you have a quality crystal press. Learned that this week the hard way. | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
That’s a good point. | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Looking to take my VSF dj41 to get a gen dial installed. Most of the watch smiths that u have talked to on here have a 4-6 week wait. Is there any risk in taking to a local watch shop to do that is not an AD? Are they going to throw my watch away if they know it’s a rep? Do I disclose to them that it is a rep? Any advi... | r/reptimeservices | post | r/RepTimeServices | 2024-05-08 |
Twenty character comment for the mod gods | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
I had done this on my own watches... Gen n rep... It's a one hour job. They will know it's fake even if u don't disclose it. I think any watch Smith can do this. It's the most basic thing and doesn't require specialize tools. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Are there any issues with bringing the rep watch to a watch smith? Is that going to create any issues you think? | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
I don't think so... Me personally I wouldn't mind. Though reps movement are somewhat fragile compared to gens. Sometimes opening it up may cause some parts to misallign. I also encounter reps with double adhesive tapes on dials. But overall, if he's careful, nothing bad will happen. | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Just go in and be friendly and ask. I'd imagine not disclosing it's a rep beforehand wouldn't work out as well as just being upfront | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
I’m trying to get a vsf DJ serviced locally and most have turned away when I tell them it’s a replica. I did find one watchmaker who was willing to look at it and hopefully get it running again. The stigma about reps is real but thankfully there are some who are genuinely curious like I am about reps and will take a ch... | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Where r u located? | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Texas | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
I concur with this. Swapped the dial on my GMF OP for a gen one and discovered that not only was the rep dial glued on, but the movement itself was glued into the case in two spots with a sticky hot glue like material.
The rep dial had no feet so I can see why they used glue dots to hold it in place, but I saw absolut... | r/reptimeservices | comment | r/RepTimeServices | 2024-05-08 |
Find a local watch repair shop on Google. Call them and ask.
Going with a mail in service will take time. Waiting is your other option if locals won’t do it. | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
r/reptimeservices | post | r/RepTimeServices | 2024-05-08 | |
Is it just the camera angle or is it not pushing back in fully? | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
I opened it up and a gear is missing teeth. That was the issue | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Ah very good, nice catch | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
damn, not a good look for these newish VR3255 movements | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Is there anything better in terms of DD 36 than GMF? YG president bracelet | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Howdy all- got a new rep royal oak offshore on strap (Factory A3126)
I'm not a big dude but this strap is TINY! Any chance folks know how to get a larger strap for this. Looking for black rubber. | r/reptimeservices | post | r/RepTimeServices | 2024-06-08 |
Looking for someone (US based. IL bonus.) to repair or replace Asian 2824 clone movement damaged/not running.
Rep Omega Seamaster Planet Ocean (NOOB V12) with Asian 2824 clone automatic movement 28800vph.
Took it apart to get some dust off the face and grease the gasket. Thought I was carefully reinserting the stem w... | r/reptimeservices | post | r/RepTimeServices | 2024-06-08 |
>I wonder if i hit the spring when putting the crown and stem back in, or damaged the clutch, or if it’s related to when the second hand (that kept running even after I removed the stem from the setting position) ran into my finger holding the movement for a few seconds.
doubtful. I'd look to see if second hand is hi... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
The clone of the ETA2824 is the PT5000 and it's a simple swap i've done it with a rep of mine with basic tools.
But diagnostically is it ticking? the balance spring moving correctly? Its possible that you'd need tor reset the keyless works as I've messed up a movement not pulling out the crown in the right position. S... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
it may not be as easy of a swap as some may think. i am not familiar with the setup, but some omega rep and gen models have thicker dials. that means that the 2824 they use has a taller hand stack (taller pinions) so that the hands dont hit the top of the dial. hopefully, someone on this sub knows if it would be a s... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
yeah, it may be easier to reset the keyless if that is the issue. sometimes these omegas come with thicker dials, meaning, the 2824 is an H5 or H6 pinion height...which are very hard to find. | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Odds are you didn’t hit the balance - at least not by inserting the stem. Most common problem is cocking up the keyless works (I do it routinely) but if you got it inserted and able to wind the watch and it’s now dying then more likely you’re hands are rubbing each other at some point. If it happens at a certain time o... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
I have changed the time and inspected with a loupe. All hands appear to be free of each other. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Prob new movement time then | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Hey RepTime services! I’ve started out my franken project on a CF Daytona 116500LN, already got a gen bracelet on it, and would like to know if a genuine Cal. 4130 fit in the case? Is the case 1:1 compared to gen, or close enough to allow the gen movement to fit?
If not, which parts would be best to swap out for gen ... | r/reptimeservices | post | r/RepTimeServices | 2024-06-08 |
Yes that fits, but since these Gen cal4130 are 10k and more it’s better to buy a full gen watch I guess | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Seems like a waste of cash for a non gen case | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
I have seen a guy dropping a gen Patek 5740 movement in a CNC custom case. Plus gen dial etc.
Rep was priced $35k.
Some people like it like that. | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Tbh the CF Daytona is my first rep, all my other watches including a Fifty Fathoms, Pepsi and Submariner are gen. AD is being a little prick about the Daytona and I’m not willing to pay 35k+ on the grey market for a 116500 Panda. Plus I don’t like the 126500.
The CF’s case, bezel and dial are good enough for me. Alre... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Just replied to the comment below yours! Basically AD won’t sell me a Daytona despite me buying several Rolex, Omega and Blancpain gens. I never bought a watch with the intent to be higher on their “list”, I only bought the watches I liked and wanted.
I don’t like the 126500 and imo the 116500 Panda is absolutely not... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Is it worth it? For me no. Get the 4130, get it serviced and you have a very reliable, accurate movement.
But if it's worth the pricetag for you - sure, go for it. Just keep in mind that the guy from my story repped a watch that is sold for over $250k in gen, so even if he paid $35k for a rep, it was still a bargain. ... | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Please share the results if you ever manage to get that done. Best of luck! 🤞🏽 | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
Mind you most gen 4130 are likely stolen goods | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
I have done a similar project already, but If you go that far, I would go for all gen to be fair, 116520 gen cases are not impossible to get | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
What parts of the 4130 did you swap out? | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Finally it was all gen 116513 build out of parts | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Impressive stuff. Thanks for taking the time to reply! | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Has anybody done a gen dial swap on a BVF Cartier Santos 40mm? I understand they don’t use the same movements, but if anyone has had any luck I’d love some insight. | r/reptimeservices | post | r/RepTimeServices | 2024-06-08 |
Just curious why? That’s the large model which is pretty much perfect | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
The perfectionist me in would like to get as close to gen as possible. I see the OEM dials are relatively cheap | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
If you want perfect buy gen. No one is gonna look that closely at your watch | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
It requires a lot of modification someone posted about doing exactly this and basically said it wasn’t worth it. | r/reptimeservices | comment | r/RepTimeServices | 2024-06-08 |
r/reptimeservices | post | r/RepTimeServices | 2024-06-08 | |
Looking for anyone in CONUS that works on these movements. Thanks in advance.
What factory, & model? What movement is inside?
* OMF DSOD with an Asian 7750 decorated to an Omega 9301
How old is it?
* Approx. 18 months
Explain the problem.
* Best I can tell the case clamp and screw at 1'o'clock was not secured pro... | r/reptimeservices | post | r/RepTimeServices | 2024-07-08 |
Hello everyone. For a while now my DD3285 has been making a grinding noise when winding the watch. Every now and then it works as it should and winds up nicely. Also, if you listen carefully, you hear strange noises when I close the crown again. Anyone have any ideas? Otherwise the watch works perfectly. | r/reptimeservices | post | r/RepTimeServices | 2024-07-08 |
I hear a noisy fan… | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Yes the build in fan is also noisy | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Wow I don’t have a watch with a built in fan but I bet it’s great for hot weather.. sorry but I only hear normal winding sound | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
It’s not normal winding noise unfortunately. Its really griddy and noisy. Before he wind very smoothly with almost no resistants and no noise. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
How long have you had the watch for | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Couple of months | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
That’s not long, it may need to be service do you have the watch on daily does it self wind ok | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
It winds fine, besides the noise the watch fine | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Other than opening the watch up to identify the issue there is not more you can do I bought a watch winder so I don’t have to self wind when I’m not wearing the watch there are cheap enough on Ali express | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
It might just be that you’re at the high end of the reserve. My vs3235 is smooth until it gets high and becomes increasingly gritty and loud. Try not to wind it too much and let the rotor do the work. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
I’ll give that a try, thanks! | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
It sounds like you're overwinding it... give it a try again when the power is completely drained and compare. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Sounds like your past your reserve | r/reptimeservices | comment | r/RepTimeServices | 2024-08-08 |
I’ll leave it for a day and try again | r/reptimeservices | comment | r/RepTimeServices | 2024-08-08 |
Sounds exactly like my brand new 226570. | r/reptimeservices | comment | r/RepTimeServices | 2024-10-08 |
help pls.. Crown came off when i was unwinding it. Do I have to bring to a watch service to get it fixed or replaced? Or possible for me to loctite / glue it back on?
I searched the subreddit previously but did not find anything conclusive for this case.
Model: VSF DJ41 Wimbledon
| r/reptimeservices | post | r/RepTimeServices | 2024-07-08 |
My layman guess after having experienced the same on my Sub is that the stem broke off. You need to open the case back, push down on a small pin to release the stem from the watch mechanism (YouTube FTW!) and order a new stem. If a small piece of the stem is stuck in the crown you put the crown in a mix of water and po... | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
The inner tube of your crown is broken (hence the spring). You need a new crown and possibly a new stem. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
do you think its possible to glue it back? | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
No | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
wowwww thanks for being so detailed! will look into this if i can. do you think even remotely that gluing it back would work? | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Nope | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
It’s an easy fix, just squeeze super glue into the open crown to fill the movement as well, let it dry and then apply more super glue to glue the crown back in. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
if i do that, wont the string not work anymore? | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
i watched the video! and from what i see, the spring i have is still intact. From what it suggests, i can take it out the case and put some loctite under the crown and put it back together!
Will try that first, at most i get a new crown stem.. | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Don’t use any glue, a replacement stem and crown is not expensive and easy to install youself, look uo for the right parts on aliexpress | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Just need crown stem should be fine | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Look on eBay for TechSwiss 24-603 crown rebuild kit, it's about 20$ and has the spring, tube, and plunger clutch. You can look through my old posts for an informative step by step guide of how to install these parts/rebuild the crown accordingly | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
His post was satire in your persistence to glue it. Just deal with the broken part. Purchase a new one.
If it’s a screw down crown, pop the crown back on and just keep it running if you still want to use it in the interim. | r/reptimeservices | comment | r/RepTimeServices | 2024-08-08 |
Hi all,
My rep was get issues with spring and balance wheel
Anyone can help me where i can buy the replace spare parts or buy new clone VR3130?
Any one can share me the trusted shop to order?
Thanks in advance
| r/reptimeservices | post | r/RepTimeServices | 2024-07-08 |
Ali express £56 search China VR3135 movement automatic mechanical movement men watch movement blue balance VR 3135 | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
May I DM to get your link, cuz i see many shop but didnot know which one is the best | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Yes | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
i dont think its an actual vr3130, but i have ordered a couple and they are still working. ymmv.
[VR3130 automatic mechanical movement men watch movement blue balance shanghai3130 - AliExpress 1511](https://www.aliexpress.us/item/3256806976866998.html?spm=a2g0o.cart.0.0.aa4b38daWgJKfF&mp=1&gatewayAdapt=glo2usa) | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Thanks for your advice,
In actually i still not sure this is VR 3130 from clean or not. Cuz this confirm from theonewatch . So i believe him :D | r/reptimeservices | comment | r/RepTimeServices | 2024-07-08 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.