text stringlengths 16 69.9k |
|---|
Abstract: This paper focuses on the terminological and practical differences between the perception of the neighbors (it is also a terminological problem in the Slovak language). We point to different human atti-tudes to people based on dissimilarity. What is the difference bet-ween the neighbor and the neighbor? Why we see one of the neighbors like a human being living near to us and another one like a friend? Which social problems we can solve if our perception of another people like neighbors will be similar to perception of them like firends.Key words: Neighbor – Society – Citizen – Dissimilarity – Attitude |
Nick Rowe has an interesting post up that I think helps to define many of the differences between the neoclassical view of the world and the heterodox adherents of endogenous money. Specifically, he discusses the ideas of the quantity theory of money and the neutrality of money within a system with endogenous money.
First, there’s a lot going on there so let’s get specific regarding definitions. So many of the problems in economics rest in the vagueness of the underlying definitions and an inability to construct a coherent and consistent framework. So, let’s get on the same page:
Endogenous money means that we all have a version of a printing press. I can create “money”. You can create “money”. Corporations issue a form of “money” (stocks or corporate debt). Governments issue forms of “money” (currency and government bonds). And banks issue forms of “money” (deposits primarily). But all of these “money” items have a certain amount of “moneyness” based on the scale of moneyness. That is, some items are better suited for actually giving us access to goods and services while others are not. For instance, you can take out a loan which is like issuing your own money based on your own creditworthiness, but you’re really just issuing that money in order to obtain a deposit which is something that everyone else will accept. In a system with financial assets that can be created from thin air the money supply is endogenous. It is not fixed, based on a money multiplier, based on a “loanable funds” theory or anything like that. We all have a printing press with varying degrees of credibility that gives us access to something with higher moneyness. The quantity theory of money rests on the idea that there is a quantifiable relationship between the supply of money and the level of prices of goods and services in the economy. This assumes that money is just like any other commodity in the economy and that changes in the money supply will be reflected in the relative value of money to goods and services. The QTM is based on the equation MV=PT (where M is the money supply, V is velocity of money circulation, P is the price level and T is transaction volume). The neutrality of money assumes that changes in the money supply affect nominal variables and not real variables. That is, an increase in the money supply changes nominal figures in the economy, but doesn’t change the inflation adjusted variables. Economists generally assume that the neutrality of money relies on temporal effects as it takes time for the supply of money to impact real variables.
Now, you can see what I’ve done here. I’ve defined the discussion in MY TERMINOLOGY. That is, I’ve taken MY WORLD VIEW of the monetary system and I’ve begun to construct these concepts AROUND that view. Obviously, I think that world view is based on a fairly realistic and sound understanding of the system. And once you accept my view of endogenous money the concept of the quantity theory totally changes because the definition of the inputs automatically changes (for instance, M becomes a very murky concept in a world of “moneyness”). In addition, the idea of neutral money becomes largely useless because my view of endogenous money totally rejects the idea that money is just like any other commodity or that the system somehow looks like a barter system where money is nothing more than another scarce resource (because, obviously, money in an endogenous money world is not scarce at all).
But something much more important is going on in Nick’s underlying world view and I think it reflects broader issues in economics. He is taking the neoclassical view where the relevant “money supply” is determined by the Central Bank. So, if the Central Bank can change the supply of high powered money or fix prices in certain markets then this ripples through the economy as if the Central Bank were the only issuer of money. In essence, it places the money supply directly in control of the Central Bank and assumes that the Central Bank has an Archimedean Lever over the entire economy. The only problem with this view is that there is almost no empirical evidence backing such an idea. In fact, QE and the expansion of the Fed’s balance sheet in recent years would appear to refute this idea thoroughly (unless, of course, you’re willing to buy into lots of other myths like ideas about liquidity traps, expectations or other temporal concepts).
So, what we have here is really a failure to properly connect the dots. In my view, most modern economists don’t construct a very realistic framework for understanding the monetary system. And they don’t apply definitions to that framework that can be consistent or coherent within a particular framework. And as a result you end up with lots of theoretical views that rely on some twisting of reality to become useful. It doesn’t mean that ideas like the QTM or neutrality of money are totally wrong or totally useless. It just means that the framework within which they’re often utilized does not reflect the reality of the system in which we actually reside. And as a result, the end conclusions require a leap of faith and certain degree of political dogma to support.
Related: Pragmatic Capitalism: What Every Investor Needs to Know About Money and Finance |
How to Decide What You Want for your Vacation on Bermuda
Making well thought out decisions can help to improve your Bermuda vacation
Making good travel decisions can be the difference between a relaxing vacation spent enjoying the gorgeous beaches and an exciting trip in Bermuda's capitol city of Hamilton. While either would make a great visit, deciding on the perfect vacation for you will take a little planning.
When making decisions, don't be hesitate to rely upon the research you've already done in order to help pick the best area and accommodations. The attention to detail that you've already invested will come in handy now, so trust yourself when it comes to picking the right options for your unique travel style.
Narrow Your Search
Maps
Bermuda is comprised of six small islands, most connected by a series of bridges. Each offers its own distinct advantages and unique personality, so learn as much as possible about every island in order to understand the choices available to you.
If your trip centers around a certain activity (such as golf or snorkeling) try to get information on the island from sources that are experienced in that field. Often magazines or Web sites can help you find exactly what you're looking for by recommending the perfect beach to explore the reefs or the best golf course for your experience level. Once you get a feel for the area that caters to your interests, it becomes easier to decide where on the island you'll want to stay.
Another important aspect to consider is the culture of Bermuda. Its close relationship with Great Britain has left an indelible mark on the island and the two countries share many conservative values. In the more rural areas you will encounter a more distinctly Bermudian attitude, which can be a treat for visitors eager for an "authentic" experience, but which may not suit travelers who want a relatively familiar trip.
Arrivals
There are a number of ways to get to Bermuda, and deciding on your method will help you to determine other details of your trip, such as how long you'll stay and how much traveling you'll do once you arrive.
Planes are a rather popular option, however the flight times and schedules should be closely reviewed to help you understand your choices. Cruise ships represent another alternative for getting to Bermuda, but travelers should bear in mind that most ships do not stay in port for long, which may not offer the same opportunities to see the island. Visitors who want to take transportation into their own hands are encouraged to sail private or chartered vessels to Bermuda, but should do further research to determine which ports will permit international entry.
Don't forget that travelers are not allowed to rent cars while on Bermuda, so you should spend a little time considering which on-island transportation method will suit you best. Since you can't drive from place to place, weigh carefully the distance between your hotel or rental property and the beaches or towns that most interest you.
On the Island
Once you've picked your arrival method and the area of Bermuda that you'd like to spend most of your time in you can begin to make decisions about where you'll stay and how you'll occupy your time.
Your first consideration should be your traveling companions. Will your trip to Bermuda be a romantic second honeymoon or a chance to catch up with your girlfriends? Guidebooks can often help by recommending activities and accommodations that are just perfect for a particular group. You may find tips on a secluded spot to catch a gorgeous sunset or a can't-miss local musician. By settling on everyone's vacation priorities before making important decisions you can ensure that no one feels like they are missing out.
When everyone has voiced their preferences you should try to determine the most meaningful aspect of your vacation. Is the location of your accommodations more important to you than the style of hotel? Will cost be the deciding factor? Whatever matters most to you, it certainly should not be difficult to find the ideal location or lodging to fit your style.
The choices you make now can ensure that your trip to Bermuda is everything you've always dreamed of. After learned all you can about the island, you should feel confident knowing that you are prepared to make informed decisions. After all, it's your vacation and there's no need to compromise. |
Portable Gateway Devices
Ground to air target illumination. The war fighter requires seamless communications between ground/air for situational awareness and identification of targets.
Addressing the Gap of Communications in the Battlefield with Portable Gateway Devices
In today’s modern battlefield, warfighters must be ready at all times, for both offensive and defensive operations. This level of readiness requires network communications capabilities without any gaps from ground to air or between systems, both old and new. Gateway devices are bridging the gap that often exists between legacy systems and between air and ground forces, enabling warfighters to be agile and informed for greater mission effectiveness.
Modernizing the battlefield and connecting devices is top of mind to ensure warfighters have critical information at their fingertips to navigate and communicate. As technology evolves, there is often a gap between communications that occur, between air and ground, when dealing with older legacy systems. As new technologies enter the digital battlefield, gateway technologies are needed to help new communication systems to communicate with legacy equipment that use different protocols.
“On the battlefield right now we have two layers of communications – air and ground,” Charles Heidal, Joint Fires and Effects Account Manager for Rockwell Collins, told us in a recent interview. “The warfighter requires seamless communications between the two for situational awareness and identification of targets.”
Warfighters require quick access to data, sharing information on where friendlies and adversaries are positioned, along with the ability to share data and communicate in any situation. Gateways have been used to help solve this ongoing issue of communicating between new systems and legacy systems. Yet in the past these devices have often been cumbersome and difficult to use in combat scenarios.
Today’s gateways continued to evolve into more portable devices that allow for greater access and ease for the warfighter on the ground.
Agility:
Gateway terminals are typically mounted to vehicles and can weigh six tons, with a generator required to ensure that the system is cooled properly. The mobility of the terminal is often lacking, without the ability to go off road. Gateway devices require agility and the ability to move with the warfighter through rough terrain. As gateway devices become smaller and more portable, it can move with the warfighter without the cumbersome requirements of older gateways.
Interoperability:
In a typical battlefield, there are a vast number of communication devices using specific protocols. Airforce, Navy, Army each have their own protocols and requirements. But on the battlefield, it is critical for troops to communicate and share information. Data link software integrated into gateway devices offers the ability to seamless communicate between forces.
Data Connectivity for Robust Data Access:
The degree of connectivity on the battlefield is often spotty and the ability to watch or view large files is often unavailable. Today’s gateway devices can network in all the videos and can store and forward the video and get it published out to you from the operation center.
“The solutions available today are a game changer for the warfighter,” HeidaI said. “It’s Netflix for the battlefield.”
Recently announced, Rockwell Collins has launched a FasTAK solution, which features a wearable targeting system available in Microsoft Windows® and Android™ operating systems. Using a mobile phone or tablet, the system offers easy-to-use applications to arm warfighters with powerful communications data that integrates with existing lasers, radios and GPS devices. The standard system delivers with a fully-integrated set of hardware that includes a laser range finder, tactical computer, video downlink receiver and the FasTAK digital targeting software. The system is low weight compared to legacy solutions. The Windows variant weighing less than six pounds and the Android variant under three pounds. |
A cluster analysis of neuronal activity in the dorsal premotor cortical area for neuroprosthetic control.
With the use of the neuronal data acquisition technology, millisecond-level multi-electrode data from several regions of the premotor area were obtained from two rhesus monkeys trained to perform arm-reach tasks with visual cues in virtual reality. In each trial, animals were required to select and perform one of the four possible arm reaching movements to the target on the top-left or top-right of the virtual reality space. They were also required to decide whether they would move their arms straight to the target or curve them in order to avoid the obstacle that was presented. After the acquired neuronal signals were processed, unsupervised Hierarchical clustering and K-means clustering were performed to uncover the similarity and difference in the average firing rate of spike train data between neurons and phases for each experiment condition. The clustering results indicate the similarity of neuronal data in the movement planning and actual movement phases, and the difference of such data from the data in information processing phases. Furthermore, the clustering results show that when the target location is on the right, the move planning started earlier. The analysis of variance (ANOVA) on the neuronal data confirms the results from the hierarchical clustering. |
Sports Injury Law
Sports are a leisure activity and are suggested to be enjoyable. Small injuries can take place and are even unavoidable in specific sports however severe injury triggered by another individual is a various story and might be premises for a claim.
If you have been hurt by the actions of another gamer or a coach or a referee, you ought to initially look for instant medical attention. Depending on your circumstance, submitting a suit might be the proper next action for you. It is incredibly essential that the lawyer you opt to manage your case is one who has dealt with sports injury cases before and is, for that reason, knowledgeable about this challenging location of the law.
Was it a contact or non-contact sport?
The basic view of the courts is that sports are physical and often harmful and you are accountable for taking that threat. That does not indicate another gamer or coach or referee cannot be held accountable if you are seriously hurt.
The requirement in accident cases is neglect – if somebody’s carelessness triggers injury, they are accountable. This is still the rule in non-contact sports. An example of a non-contact sport is tennis. If you were hurt throughout a tennis match, then you would take legal action against under a neglect theory – i.e. the gamer or coach was negligent in some way that triggered your injury.
With contact sports, there is the contact sports exception (likewise understood as the contact sports teaching), which mentions that an individual is just responsible if their actions were deliberate or willful and wanton. Contact sports consist of soccer, baseball, and basketball. If physical contact is an anticipated part of the sport, then it certifies as a contact sport. If you were hurt while playing a contact sport and you think that the injury was triggered by another gamer’s deliberate actions, you would take legal action against under the contact sports exception.
Showing it was deliberate or willful or wanton.
Showing that the offender acted deliberately or recklessly will depend upon the realities and other elements such as whether the action is exactly what is acceptable or regular because of specific sport. Brushing into a gamer as they move into house base is common however tripping the gamer is not. The truths of your case and the series of regular activity in the sport you were playing will be used to show intent.
Was it a complete contact sport?
Complete contact sports are another exception all their own. For these sports, the requirement is deliberate or totally beyond regular activity for that specific sport. Complete contact sports consist of football, hockey, and boxing, where physical contact is really an aspect of the video game.Get more details here http://www.medicaidfraudhotline.com/news.php If you were seriously hurt throughout a football video game, you would have to show that the accused’s actions were deliberate or that the offender’s actions went totally beyond exactly what is appropriate for that specific sport.
Was it brought on by a non-participant?
It is thought that holding non-participants like a coach or a referee responsible for carelessness would adversely impact the sport. Still, the requirement is that these non-participants owe a task to not damage others. Coaches are anticipated to supply direction on security and referees are anticipated to stop a video game when they see an offense. If you think a coach cannot supply safe guidelines or if you think a referee permitted an offense to continue that resulted in your injury, you might have premises for a claim. Once again, it will depend on the truths of the case and the expectations of the sport.
Was your child harmed playing a sport?
If your child was hurt while playing a sport at school or at another center, the school, group, coach or center might accountable depending upon the scenarios. If the playing field or location was not correctly preserved, it could be a carelessness concern. If, as kept in mind above, the gamers were not correctly monitored or the referees were not calling offenses or another gamer deliberately damaged your child, you might have a case based upon the above kept in mind law. In either case, you need to speak with a lawyer as right after your child gets medical attention.
Discovering the best sports injury lawyer
Like all locations of law, there istime frame to submitting your case. You need to get in touch with a lawyer as soon as possible to examine your choices.
This is a specific niche location of the law which is why it is very important that you work with a lawyer who understands it well and has effectively dealt with these kinds of cases. Call us. We understand lawyers in your location who practice this kind of law and we will advise the ideal lawyer for your case. |
ant hill activity
Last spring I started to document my sound recording activities with a video camera (many times recording the audio directly to the camera). This material eventually developed into the Location Sound Films project. After collecting a wide amount of material from field recordings, natural phenomenon, found objects and site-specific activity, I started to try and figure out what to do with it. Some of the videos made their way into live performances while others were used in installations. To give some idea of what this material looks like I am posting one here. This one I’ve termed “Ant Hill Activity” because that’s just what it is. This was recorded in south Estonia while on a roundabout excursion (it was not planned). I’m posting this video especially in response to some people asking Steve Roden what his recording of ants in Norway sounded like. |
I really like how you chose to explore young Tonks versus the one that we meet in the books. I think my favorite piece of characterization was this paragraph: "Her mother was the princess- she was beautiful, and she did all the sorts of things princesses did. She cooked, read books, mended clothes and cleaned. Nymphadora climbed trees, played with the boys in the street, rolled in the grass and refused to clean her bedroom. That was before. But now that she was growing up- practically an adult, she understood what the most important thing really was. Jokes." I loved the contrast between Tonks and her mother. Tonks seems very aware of herself and set in herself at a young age, which I would expect from someone who was such a successful Auror.
Her father was very pleasant to read, but I wish I got a little more of his backstory, although I understand the focus was supposed to be on Tonks.
I loved the ending and her mother mourning the loss of her two sisters. This told me a lot about the mother's character without having to rely on descriptions (showing rather than telling) which I think is a real art, so well done!
Due to her being an auror later, I couldn't imagine her being incredibly girly or anything. I wanted her to be a bit more like Ted, rather than Andromeda though still be able to have that love and respect for her mother.
I adore writing Ted, and reading about Ted, especially his backstory. I'm thinking of doing some more Ted/Andromeda stories so that I can get a chance to explore that.
I love writing about Andromeda so I just couldn't resist putting that in. I'm glad you liked it! |
Wicked Definition Sticker
Wicked Definition Sticker
Wicked is definitely a New England thing, so only the coolest people on earth know what it really means. It has nothing to do with being mean and definitely nothing to do with witches or a Broadway play. Do your part and educate the world with this sticker! It's wicked awesome! |
import Login from './Login';
export default Login; |
Most of us have core fear beliefs that obscure our true nature and bind us in repeating patterns of painful emotions and behavior. This talk looks at the beliefs that limit us and the freedom that is possible when we investigate them with a kind, mindful awareness. |
Q:
How to import fromUtf8 in QGIS?
# Declare instance attributes
self.actions = []
self.menu = self.tr(u'&City_searcher_plugin')
# TODO: We are going to let the user set this up in a future iteration
self.toolbar = self.iface.addToolBar(u'city_searcher_class')
self.toolbar.setObjectName(u'city_searcher_class')
QObject.connect(self.dlg.Statecombo, SIGNAL("currentIndexChanged(int)"), self.findTheCityNames)
QObject.connect(self.dlg.Citycombo, SIGNAL("currentIndexChanged(int)"), self.calcDistance)
QObject.connect(self.button_box, QtCore.SIGNAL(_fromUtf8("accepted()")), self.buffer)
#QObject.connect(self.dlg.browsepushButton, SIGNAL("clicked()"), self.saveTheFile)
In the above snippet, I used fromUtf8. But it is saying an error fromUtf8 is not defined. Where should I import fromUtf8 like from qtgui or qtcore?
A:
You can apply the following code to define fromUtf8 which was taken from the QGIS Workshop describing how to use PyQT for QGIS:
_fromUtf8 = QtCore.QString.fromUtf8
|
Q:
Laravel - How to take first name and last name from separate fields and store them in name column in db?
So I used php artisan make:auth in my project and I am building on top of that. Problem is it has only "name" field and not "firstName" and "lastName" field. Where do I configure those options? I want to take the input from first name and last name and concatenate them with a space between them, then store them as name in my db. Where is the place to do that? Where do I configure my options like if I want to add an address or phone number for my user? I researched a lot and I am really confused with all those traits so please could someone give me some advice on how to proceed with user authentication?
A:
For use name instead of first_name and last_name open database/migration/create_user_table
write
$table->string('name');
instead of
$table->string('first_name');
$table->string('last_name');
After that open app/Http/Controller/Auth/AuthController.php and then put your code like that
protected function create(array $data)
{
return User::create([
'name' => $data['first_name'].' '.$data['last_name'],
'username' => $data['username'],
'email' => $data['email'],
'password' => bcrypt($data['password']),
]);
}
if you want to use more fields,write those fields in migration file which is on database/migration and then use those fields in resources/views/auth/register.blade.php that files's html form,and after that change AuthController.php file
|
The all-seeing Brother Eye satellite has unleashed a new beast upon the DC Universe in this smashing new series! Kevin Kho has become an unwilling participant in a war between Checkmate and Brother Eye as he is transformed into the One Machine Army Corp known only as O.M.A.C.! |
Jaw crushers are machines that typically are stationed at construction sites such as where buildings are being demolished or roads are being built or repaired. The jaw crushers are used to reduce rubble or other materials from a larger to a smaller size. Material from these constructions sites may be placed into the jaw crusher, crushed into a suitable size by the jaw crusher and a further processing machine, and then reused at this particular construction site. This allows for a quick, inexpensive supply of needed materials along with the reduction of waste to the environment.
Another important use of jaw crushers is in assisting in the cleaning up and the reduction of waste in our society. Jaw crushers may reduce objects from a larger to a smaller size in order to recycle and/or store waste material. Jaw crushers assist in recycling used concrete, asphalt, brick, cinder block, demolition debris, glass, and any other substances that are hard and brittle. Jaw crushers are also used for crushing rock and other natural substances. The recycling of these materials is an increasingly important aspect in the cleaning and preservation of our environment.
A typical jaw crusher uses a diesel/hydraulic system in order to operate. It is often the case that other pieces of machinery that work in conjunction with the jaw crusher to reduce material from a base size to the desired size also have their own diesel/hydraulic systems. For instance, a front end loader may load material into the jaw crusher, and a screening device may be present to reduce the size of the material that is ejected from the jaw crusher. Further, a conveyor system is commonly employed to transport material to and from the jaw crusher. In addition to the increased cost of running these separate systems, operation of such numerous diesel/hydraulic systems also negatively impacts the environment.
A jaw crusher includes a generally V-shaped crushing space that is formed between two crushing plates. Typically one of these plates is a fixed plate while the other plate is movable. It is common for an eccentric shaft to be provided on the jaw crusher. The movable plate is in communication with this eccentric shaft, and rotation of the eccentric shaft causes a corresponding movement of the movable plate. Material is placed into the upper portion of the crushing space. This material, for instance a stone, is then crushed between the two crushing plates by relative movement of the crushing plates. The broken material then falls due to gravity into a subsequently narrower portion of the crushing space and is likewise reduced in size. Upon exiting the crushing space from the jaw crusher, the material is reduced to a size smaller than that when previously inserted.
In a typical jaw crusher, the movable plate transfers a great quantity of energy in a short amount of time into the material that is crushed between the two crushing plates. This energy is transmitted into the stone or other material and concentrates locally in a weak portion or interior area of the stone. This local concentration of energy allows for the stone to be crushed between the two crushing plates.
Some jaw crushers are provided with a wedge adjusting mechanism that may be used to toggle the distance between the two crushing plates. Such an adjustment of the distance between the crushing plates is effected when the jaw crusher is turned off. Such an adjustment of the distance between the two crushing plates will allow for varying output sizes of material to be realized.
Problems have occurred in jaw crushers when they are utilized in crushing softer materials, for example asphalt. It is sometimes the case that these softer materials are not pulverized into smaller pieces, but are instead pressed into a smaller, harder piece. Such pressing of soft materials presents a problem because they may become adhesively connected to one of the crushing plates. In such a situation, the sticking of material onto one of the crushing plates may prevent operation of the jaw crusher. This situation requires stopping the jaw crusher and removal of the jammed object. Crushing material that contains clay or other softer materials may necessitate the stopping of the jaw crusher at occasional intervals in order to scrape out the compacted clay from corrugations that may be present on the crushing plate. The pivotal crushing plate of some jaw crushers may be rotated in an opposite direction in order to remove this adhesively connected material from the crushing plate. Upon removal of this material, the crushing plate may be again rotated in the forward direction to once again pulverize material.
A jaw crusher is also designed in order to crush harder materials. In fact, jaw crushers may crush materials that contain steel. It is sometimes the case that material that contains steel when crushed by a jaw crusher separates from the steel upon being crushed. An example of some material that may be crushed by a jaw crusher include: rock, rubble, stone, boulders, concrete, asphalt, brick, block, glass, demolition debris, and the like.
In some jaw crushers, the most efficient mode of operation of the jaw crusher is to keep the crushing chamber full of material. Material may be fed into the crushing chamber of the jaw crusher by, for instance, a front end loader.
Jaw crushers are typically positioned at single locations in a construction site. Other pieces of machinery must be used in order to provide material to the jaw crusher to be crushed. Additional equipment must be employed in order to remove the material that is ejected from the jaw crusher, and must be used to further process the material into a desired size. Additionally, further equipment may be required in order to transport the ejected material from the jaw crusher into a desired location. All of the equipment and/or systems used to transport material to and from the jaw crusher, in addition to further process the material, require a source of power. Also, these systems must be maintained and often operated by a user. Elimination of these systems would prove beneficial in that less energy, man power, and/or power sources would be needed to complete the process. |
Inorganic Textbooks
Browse New & Used Inorganic Textbooks
The branch of chemistry that deals with non-biological compounds is known as inorganic chemistry. These compounds are characterized by the fact that they don't contain any hydrogen or carbon bonds. There are many misconceptions surrounding inorganic chemistry. For example, many people wrongly assume that inorganic chemistry only applies to non-living items due to the lack of carbon, but this is incorrect. Buy or rent our cheap inorganic chemistry textbooks to help you understand what exactly the subject covers. The knowledge you gain from the affordable textbooks will put you in a great position to progress with a career in inorganic chemistry should you choose to at the end of your studies. You will also complete your studies with a far healthier bank balance if you choose to buy your inorganic chemistry textbooks from us, as our textbook prices are the lowest you will find. Well that is if you don't decide to treat yourself in the meantime with the money you have saved! |
Compliance with personal precautions against exposure to bloodborne pathogens among laboratory workers: a Canadian survey .
A survey was conducted in laboratories across Canada to determine rates of compliance with recommended safety precautions against exposure to bloodborne pathogens and the rationale for current behaviors. Laboratory workers reported high rates of exposure to bodily fluids and poor rates of compliance with personal protective behaviors. This national study has identified several deficiencies and strategies for improvement. |
Q:
parse selective table rows in python with lxml and xpath
below is the structure of the html file that i wish to parse
<tr data-mod-primary="true">
<td>'some text'
<tr>
<td>'some text'
<tr>
<td>'some text'
<tr data-mod-primary="true">
<td>'some text'
I am interested in parsing only the text under <tr data-mod-primary="true"> and ignore other <tr>'s
I get all <tr> text through .xpath('//tr/td/text()') but this is not what I want. I have tried the below code after researching for solution for sometime:
.xpath('//tr[contains(@data-mod-primary="true",None)]/td/text()')
but this too gets me the text under all <tr> basically same result as .xpath('//tr/td/text()')
Any help is appreciated. thank you.
A:
You can use @attr=value to extract specific tr tags:
//tr[@data-mod-primary='true']/td/text()
Or if you use contains, it would be something like:
//tr[contains(@data-mod-primary, 'true')]/td/text()
|
[Spontaneous rupture of biceps brachii tendon; ultrasound diagnosis in emergency, apropose of two cases. Updating results of surgical repair].
The rupture of the biceps tendon has either thraumatic or spontaneous degenerative etiology. Degenerative tears can occur during physiological abduction of shoulder, just it has been verified in woman affected by arthromyalgic chronic pain, due to arthrosis, or lifting light weight, like the second case showed Clinical suspect has been confirmed by ultrasound in emergency, validating surgical decision, that's the only treatment for this kind of pathology (arthroscopic or wide open surgery). |
Category Archives: Health and Wellness
Given all that you can be facing at any point and time in your life, does it seem at times as being a little overwhelming? For many individuals, they let life get the better of them. When it does, there can be some different ramifications that play out in the process. With that in mind,…Continue reading »
All of us – at some point in our lives – have to accept the fact that we are going to grow older and older. Most of us get scared – if not even depressed – at just the plain thought of having to age. And – let’s face it – the reason behind this…Continue reading »
If you have recently found out you are pregnant then it is a wonderful, exciting time. However, it can also seem a little overwhelming to begin with as there are lots of things to think about. A big part of a healthy pregnancy for you and your unborn child is the antenatal process. You may…Continue reading »
How long have you been sitting down right now? And how long have you had that sensitive twist in your back when you turn a certain way? Exercise and mobility is something we should all be practicing on a daily basis, or at a minimum weekly. We fall into good routines, and then drop them,…Continue reading »
Many parents fear for their child’s health. Children are significantly less active than they once were, choosing video games and television over swings and sports. In this new craze, many parents are trying desperately to get their children away from the screens and into sports and activities that encourage physical health. However, a parent can…Continue reading »
It seems like only a short time ago there were conversations about our work lives diminishing and our leisure time consuming the largest part of our lives. We were told that we would have so much extra time, that filling it meaningfully would be our biggest challenge. Needless to say, this has not come to pass…Continue reading »
Many people are devastated by the thought of a divorce. The reasons often relate to their feeling as if the entire time in their marriage, that their spouse was not simply acting. They go back through their minds and question every good time or conversation about love and wonder if those things were real or…Continue reading »
Subscribe to the Urban Housewife
Enter your email address to subscribe and get a cute lovely notification of new posts by email. |
Researching limiting long-term illness.
Needs assessment has become one of the cornerstones for commissioning health care in the UK but, as yet, no agreed methodological framework exists. This study attempts to build on a number of different approaches used in needs assessment in order to formulate a more complex and integrated model. We have taken limiting long-term illness (LLI) as a starting point and examined its prevalence within the primary care setting in an area of North Staffordshire. This was followed by the application of a health status measure on two sub-samples (those reporting LLI and those not reporting LLI). The diagnostic assessments of the GP was placed alongside the results of the health status measure in order to compare self-assessment with the professional perspective. Finally, in-depth interviews with people with LLI were carried out examining their own experience of ill-health. We argue that this detailed and complex needs assessment allows for a more targeted approach to commissioning and service development. |
wysihtml.commands.insertUnorderedList = (function() {
return {
exec: function(composer, command) {
wysihtml.commands.insertList.exec(composer, command, "UL");
},
state: function(composer, command) {
return wysihtml.commands.insertList.state(composer, command, "UL");
}
};
})();
|
The present invention relates, in general, to the teeing up of golf balls and is intended to promote safety and joy of the game for golfers who find it difficult to make a full bend down to the ground level. The normal procedure is to hold the golf ball against the head of the tee in one hand and then bend down to insert the stem of the tee into the ground to a desired position of the golf ball. This maneuver requires a steady hand to insure that the ball does not fall off the tee head. Present devises are hampered by their heavy metal rod construction, inaccurate ball on tee placement, tee off inconvenience and storage problems.
Thus it would be desired to provide a golf ball teeing device which would be light in weight, unobtrusive and with secure ball on tee placement on the ground. |
Graph – Depth First Search using Recursion
Objective: Given a graph, do the depth first traversal using recursion.
Earlier we have seen DFS using stack. In this article we will see how to do DFS using recursion. (Recursion also uses stack internally so more or less it’s same)
What is depth-first traversal– Depth-first search (DFS) is an algorithm for traversing or searching tree or graph data structures. One starts at the root (selecting some arbitrary node as the root in the case of a graph) and explores as far as possible along each branch before backtracking. Source – Wiki |
<h1>Service components in <code>ngAnimate</code></h1>
<div class="component-breakdown">
<div>
<table class="definition-table">
<tr>
<th>Name</th>
<th>Description</th>
</tr>
<tr>
<td><a href="api/ngAnimate/service/$animate">$animate</a></td>
<td><p>The <code>$animate</code> service provides animation detection support while performing DOM operations (enter, leave and move) as well as during addClass and removeClass operations.
When any of these operations are run, the $animate service
will examine any JavaScript-defined animations (which are defined by using the $animateProvider provider object)
as well as any CSS-defined animations against the CSS classes present on the element once the DOM operation is run.</p>
</td>
</tr>
</table>
</div>
</div>
|
[Application of paramunity inducers in small animal practice].
Paramunity inducers have been used to treat small animals for decades. Paramunity inducers are based on attenuated and inactivated poxviruses (avipox virus and parapox virus). Their applications include both therapeutic and prophylactic use in various diseases. Despite their wide and variable use, only a very small number of placebo-controlled studies has been published. Positive effects in preventing kitten mortality and in treating feline stomatitis have been reported, however, no statistically significant effect of their therapeutic use in canine parvovirus infection, feline leukemia infection virus infection or canine papillomavirus infection could be demonstrated. For these infectious diseases, paramunity inducers do not appear to be effective. |
Mass. officials seek long-term answer on nuke fuel
BOSTON (AP) — On-site storage of spent nuclear fuel at commercial U.S. reactors poses continued risks to the public, two Massachusetts officials warned in a letter to members of Congress.
Attorney General Martha Coakley and state Senate President Therese Murray, D-Plymouth, called for passage of the Nuclear Waste Administration Act, a bill aimed at creating a process for establishing a process for creating permanent storage facilities for spent fuel.
"This is a public safety issue, an environmental issue, and a taxpayer issue — and the federal government has an obligation to act," Coakley said in a statement.
The lack of existing long-term facilities for storing spent fuel is a "major concern," said Murray, whose Senate district includes the Pilgrim nuclear plant.
"This legislation will establish long-needed procedures to move this waste to a permanent offsite location and ensure the safety of our communities and the quality of our environment," Murray said.
The letter also said ratepayers are forced to shoulder the costs of storing the spent fuel at reactor sites.
When Pilgrim went on line in the 1970s, it was assumed that a permanent disposal facility would be built. In the letter, Coakley and Murray warns the stockpiling of spent fuel at individual plants increases the risk of catastrophic core melt or fire from a terrorist attack, earthquake or other natural disaster.
The Nuclear Regulatory Commission has asserted that the danger posed by on-site storage is low.
Carol Wightman, a spokeswoman for Pilgrim, told The Boston Globe that the plant's storage procedures are safe, but that it would welcome a permanent disposal facility established by the federal government. |
An orange, along with all citrus fruit, is a hesperidium, which is a "modified berry" with a tough, leathery rind. A berryis any simple fruit produced from a single ovary. Keep in mind, though, that this is the botanical term, and not common parlance. In botany, many items we call "berry," such as a cranberry, strawberry, blackberry, and raspberry, are not actually berries, and many things, such as tomatoes and grapes, are. Knowing what is a berry and what isn't is not really important though, unless you're about to take a botany exam or compete on Jeopardy. |
Indications, results, and complications of refractive corneal surgery with lasers.
Large numbers of patients are being treated for myopia, hyperopia, and astigmatism using the excimer laser. For many patients who are treated for myopia and hyperopia, the procedure is elective and these treatments remain investigational. The use of other lasers for refractive surgery is at an earlier stage, with human trials commencing for infrared lasers. Animal studies are being performed for pulsed picosecond and solid-state ultraviolet lasers. The indications for refractive treatment should be clearly defined, although the results of laser application remain the subject of investigation. Complications of laser application to the cornea occur in the immediate, short-term, and long-term posttreatment period. A continual improvement in refractive results along with a reduction in complications remains the goal of laser refractive research. |
RasPi
The linked Tutorial gives a brief overview of all the steps that are necessary to integrate a RC522 RFID Reader via Raspberry PI into NodeRED environment using IBM Bluemix services, watson IOT and nodes. |
Real-time, real racing action
Take a virtual seat in the most competitive racing series on the planet as you go head to head in real time, against real Formula E drivers in every round of the ABB FIA Formula E Championship.
The first-of-its-kind game same mirrors the speed, positioning and movement of the drivers out on track in-game, using timing data, hyper-realistic scenery and a cutting-edge physics engine for an exceptionally authentic racing experience.
More than a race
Alongside getting behind the wheel and sitting side-by-side with the world’s best drivers, players can build their own collection of personalised cars with special tuning and set-up options. Fans can also re- play pivotal moments from past races, compete in custom scenarios and challenge friends and opponents online to better their time.
SHARE THE ACTION
See that spin? Re-watch that win? No problem. Clip up all your highs, lows, achievements and disasters from the race and share them on social. Post that record Qualifying time or just sit back and enjoy the live action from the cockpit. It's your race. |
Intracardiac lipoma arising from the papillary muscle.
Cardiac lipoma is the commonest nonmyxomatous benign primary cardiac tumor. We report a case of lipoma arising from the anterolateral papillary muscle and presenting with a transient ischemic episode and a history of malignant melanoma. The lipoma was removed leaving the mitral apparatus intact. |
<!DOCTYPE HTML>
<html>
<body>
<h3>Note: You must have started chrome with <tt>--enable-file-cookies</tt> for
this test to work manually.</h3>
<script>document.cookie = "__pc_pages=update-transactions; path=/";</script>
<script src="../../common/start.js"></script>
</body>
</html>
|
A population of neurons in the arcuate nucleus of the hypothalamus expresses proopiomelanocortin (POMC), a polypeptide precursor that when cleaved yields alpha-melanocyte-stimulating hormone (alpha-MSH) and beta-endorphin (beta-end). These products are involved in the regulation of many homeostatic functions such as reproduction, fluid balance, appetite, stress and motivation. Although, it is well established that estrogen affects POMC gene expression, the molecular mechanisms have not been elucidated. This proposal aims to investigate the molecular mechanisms of estrogen action on the arcuate POMC neurons leading to increased release of alpha-MSH and beta-end. Preliminary microarray results comparing gene expression changes in the hypothalamus showed the upregulation of PI3 kinase p55gamma, which is part of the PI3-kinase signaling pathway. Using single-cell reverse-transcription PCR and in situ hybridization, I will determine if PI3Kp55gamma is localized in POMC arcuate neurons. Second, I will validate the microarray finding that PI3Kp55gamma is regulated by estrogen using RNase protection assays and quantitative real-time PCR. Finally, I will determine the function of the PI3K pathway in estrogen signaling in POMC arcuate neurons using whole-cell recordings. |
How much longer is this show going to be on? I remember that the last season of Dance Moms seemed to go on forever, but I honestly don't know how much more I can take of Abby Lee Miller. Last night, she gave Chloe a bit of a reprieve while she focused most of her ugliness on poor Kendall. These girls are not okay with this abuse. Sure, there are a few scenes here and there that make me think parts of the episode are totally scripted, but Kendall's tears were real. The defeat in Chloe's eyes was real. The look on Nia's face that made it quite clear she couldn't stand her dance teacher (loved it!)…that was real.
Before the pyramid, Holly invites Abby and the other mother's to come to her book-signing party for her affirmations. Abby reminds Nia that dance should come first and insinuates she should get credit for ideas behind the book. Abby wonders if her affirmation "silence is golden" will apply when Holly learns that Nia is at the bottom of the pyramid. That's the face I'm talking about, Miss Nia! Kendall follows, and while Abby couldn't find anything wrong with Kendall's performance she wants to punish her for her mother questioning why she wasn't featured in the group dance. Maddie is third from the bottom because she wasn't at the competition, but Abby is still proud of the job she was doing in L.A. Am I wrong or does Abby usually put other dancers who are absent in the last spot? Chloe is in the third spot, and Christi can't believe that Abby gives her daughter even the smallest amount of praise. MacKenzie is second with Kalani topping the pyramid.
CLICK THE CONTINUE READING BUTTON FOR MORE!
The competition is in Detroit so Abby wants the group dance to show the downfall of the automotive industry called Riches to Rags. It seems a bit insulting to liken the citizens of the city where they are competing to dirty hobos. Holly isn't on board with mocking the hardships of Detroit. Both Maddie and Kendall get solos, and Kira wonders when Kalani will get the chance to go up against Maddie. Abby screams that Kalani was brought to the ALDS to dance with Maddie not against her. Abby coddles Maddie, sharing that she's timeless and classic and beautiful and will never go out of style. Jill wonders if Melissa would have an issue with Maddie going head-to-head with Kalani, and Melissa stutters and stammers that it wouldn't be a big deal as it will never happen.
The moms come to support Holly at her book-signing (how adorable is Holly's husband?) before Abby arrives to make a scene. Holly handles Abby's outburst with patience and grace. Must Abby always be the center of attention? She's like a spoiled six-year-old. Back at the studio, Abby prepares her students for her absence the following day. There will be no mothers running music, changing choreography, messing with costumes, and no Kalani dancing a solo. Are we all clear? Abby and her sidekick are working with Kendall on her solo where she is holding a pair a point shoes while dancing. It's hard to balance the shoes around her neck, and both Abby and the instructor are yelling at Kendall that they never have these issues when working with Kendall. Kendall fights back the tears and asks to be excused. Abby yells that Kendall isn't allowed to go boo-hooing in the bathroom. Jill interrupts to stop the adults from ganging up on her poor daughter, and Kendall leaves sobbing that she doesn't want to do the solo. In her talking head, Abby shares that Jill is learning that her daughter can't keep up, and Maddie is the only predictable dancer she has. She knows Maddie will always be in the top five. Top five? Not number one? Is someone already backtracking? Poor Kendall goes into the dressing room and whispers "I hate this" as she's comforted by her mother. It's heartbreaking.
In the most scripted part of the episode, Maddie, Kendall, and Kalani are goofing off in the costume room. Kendall stammers over her line that she's happy to have Kalani on the team to inspire the others to be better dancers. Cue Maddie's side-eye. Kalani has rehearsed her lines a little more, saying that she loves the girls of the ALDC, but she's probably going to be hightailing out of there soon if she doesn't get a solo. More Maddie side-eye. In the viewing room, Holly thanks the other moms for coming to support her at her book signing, but she reveals she texted Kelly to tell her that she missed her presence. Melissa is summoned to video Maddie's rehearsal, and she recognizes that her daughter is under a lot of pressure to stay Abby's favorite. Those are her exact words. What lofty aspirations she has for Maddie–to be the most liked by a monster! As Kendall rehearses without Abby, Abby's minion teacher is still passive aggressive as Kendall drills her steps. Christi tells Jill to let Kendall know the moms are all rooting for her.
In Detroit, Abby is walking around like royalty while being stalked by dance moms who have attended her various open calls. Abby reminds Maddie that Kendall was amazing at Nationals last year, and she could be competition for Maddie had Jill not taken her on vacation causing her to forget everything she'd ever learned as a dancer. Maddie nods like a robot while Kendall just keeps running through her dance. She dances first, and she does an amazing job. In between bouts of playing on her phone, Abby comments that her performance is sloppy. How would she know? Is she even watching? Kendall's facial expressions are amazing at least compared to Maddie the One-Faced Wonder who dances left. Her routine is flawless, but she looks like she's in pain the entire time.
In the hallway, Kira questions whether her daughter should do a solo, and Jill goes running to Abby to tattle. When Abby questions the situation, Kalani explains that her mom wants he to dance a solo, but she's not going to since Abby is against the idea. Smart girl. Abby yells that Kalani fits in with the team, but she's worried that Kira may be another Christi or Kelly. The hobo dance is actually really cute, and I am pretty sure that the city of Detroit had no clue it was supposed to be a representation. After they finish the routine, one of the open call moms comes in with her daughter to congratulate the girls. She tells her daughter that she thinks Maddie may have out-danced her, but she's clearly got Kendall beat. How humiliating. Kendall's face just falls, and Abby should stick up for her dancer. Of course, she doesn't. When Jill chastises the mother and tells her to leave she receives a half-hearted apology before Kira jumps up to have Jill's back. She's hurling insults left and right, and the new mom retaliates. Unfortunately, all of the insults have to do with their daughters' performances…and their daughters are standing right there.
In order to let Kira prove her point, Abby instructs Kalani to beat the crap out of the new girl in the improv competition. Nia, Kendall, and MacKenzie are out in round one. A surprised Maddie is eliminated round two, as is the girl from the open auditions. Melissa is shocked. There must be some kind of mistake! Chloe and Kalani make it to the top three (which is incredibly impressive) only to be beaten by a girl who looks to be sixteen years old. At the awards ceremony, Kendall places ninth and Abby has her smug "not surprised" face. Maddie and the hobo dance both place first. Back in the dressing room Kalani is chastised for losing the improv while Abby shares Chloe's slew of turning mistakes. Christi makes a face and Abby starts screaming about her horrible attitude. Much like with Kelly, Abby is the instigator and keeps getting closer and closer into Christi's personal space as Christi is backed into a wall. However, instead of pulling Abby's bump-it, she simply blows air into Abby's face and keeps repeating to Abby that she isn't afraid of her. This show has just gotten so, so dark.
TELL US-WHAT DID YOU THINK OF LAST NIGHT'S DANCE MOMS? SHOULD KALANI AND MADDIE GO HEAD-TO-HEAD? |
Although natural caloric sweetener compositions such as sucrose, fructose, and glucose taste good to most consumers, they are caloric. Therefore, alternative non-caloric or low-caloric sweeteners have been used widely as sugar or sucrose substitutes. Many non-caloric or low-caloric sweeteners, however, are prohibitively expensive and/or exhibit sweet tastes that have different temporal profiles, maximal responses, flavor profiles, mouthfeels, and/or adaptation behaviors than that of sugar.
For example, the sweet tastes of natural and synthetic high-potency sweeteners are slower in onset and longer in duration than the sweet taste produced by sugar and thus change the taste balance of a food composition. Because of these differences, use of natural and synthetic high-potency sweeteners to replace a bulk sweetener, such as sugar, in a food or beverage, causes an unbalanced temporal profile and/or flavor profile. In addition to the difference in temporal profile, high-potency sweeteners generally exhibit (i) lower maximal response than sugar, (ii) off tastes including bitter, metallic, cooling, astringent, licorice-like taste, etc., and/or (iii) sweetness which diminishes on iterative tasting.
Compounds have been identified that are capable of enhancing or increasing the perception of sweetness of sweeteners. By combining these compounds with sweeteners the amount of sweetener needed to obtain a desired degree of sweetness may be reduced significantly, thereby reducing the calories imparted by natural caloric sweeteners or reducing the amounts of low-caloric or non-caloric natural or synthetic high-potency sweeteners. It is well known to those skilled in the art of food/beverage formulation, however, that changing the sweetener in a composition requires re-balancing of the flavor and other taste components (e.g., acidulants). If the taste profile of sweetness enhanced sweetener compositions could be modified to impart specific desired taste characteristics to be more sugar-like, the type and variety of compositions that may be prepared with that sweetness enhanced sweetener may be expanded significantly. Accordingly, it may be desirable to selectively modify the taste characteristics of sweetness enhanced sweetener compositions. |
We encourage people from a variety of backgrounds, ages and levels of experience to join our volunteer community and offer a wide range of roles at our Oxford Road Campus Hospitals, Wythenshawe Hospital, Withington Community Hospital, Trafford General Hospital and Altrincham General Hospital.
Wherever you join us, we aim to find a role that best suits you and your individual strengths.
You could meet and greet our patients and visitors, help transport them around Oxford Road on our eco-bus. Alternatively, you could assist in one of our tea bars, direct patients at an Information Desk or provide administrative support to staff, including interpretation and translation.
If you’re an animal lover, you might want to consider getting involved with our Pets-As-Therapy service. You could take part in engaging patients with activity packs (including cards, boards, games, paints and crafts). Some volunteers help to provide entertainment for sick children through our Radio Lollipop service. Or perhaps you’d prefer to become a dining companion to help improve the patient experience at mealtimes.
There are also opportunities to get involved in very specific departments, where age restrictions apply. These include: |
Q:
UIButton not working when single tap gesture is added to superview
I have a UIButton set up and hooked up to an action in my view controller as usual. Just this by itself works fine.
Now, I have added the following to my view controller to set up a single tap:
- (void)viewDidLoad {
[super viewDidLoad];
UITapGestureRecognizer * singleTapGesture = [[UITapGestureRecognizer alloc]
initWithTarget:self
action:@selector(handleSingleTap:)];
[self.view addGestureRecognizer:singleTapGesture];
[singleTapGesture release]; }
Now, every time I tap the button it looks like it was tapped but it fires the gesture recognizer code instead of the button action.
How can I make it so that the button works when I tap the button and the tap gesture works when I tap anywhere else in the view?
A:
Your problem is similar to this question which hopefully has been answered ;)
UIButton inside a view that has a UITapGestureRecognizer
A:
Here is a simple solution
singleTapGesture.cancelsTouchesInView = NO;
|
The maintenance of cardiac performance would be of positive survival value in various forms of circulatory shock states. A circulating cardiodepressant factor, termed myocardial depressant factor (MDP), has been hypothesized to be the pathogenic agent for cardiac dysfunction in shock states. This hypothesis remains one of the most controversial hypotheses explaining the cardiovascular collapse of irreversible circulatory shock. This cardiodepressant peptide apparently originates in the ischemic pancreas, but its actions and role have remained controversial. This project seeks to define the pathophysiological role of this factor in the development of irreversible shock. This will necessitate the isolation, purification, and structural analysis of the factor(s) that possess MDF-like activity. Preliminary results in our laboratory indicate the existence of such pancreatic material and suggest the active component is a single moiety rather than a group. We have also been able to partially isolate this material by use of a cellulose column. The quantification of the biological actions of the purified factor will be assessed in the isolated papillary muscle, isolated purified heart, and in vivo. In order to ascertain the role of the compound in the pathogenesis of circulatory shock, a specific antibody against the compound will be formed and administered to a variety of shock models. By selectively removing the MDF-like compound from the circulation in a variety of shock states, it should be possible to definitely ascertain the role of the compound with MDF activity in the development of irreversible shock. Using this approach, it may be possible to obtain data upon which a rational evaluation of the pathogenic role of MDF in the genesis of circulatory shock may be made. |
NONE
The present invention relates to suspension systems for off-road equipment, such as agricultural tractors, and more particularly to such suspension systems that provide hydraulic load leveling.
Off-road equipment, such as construction and agricultural vehicles, can carry widely varying loads. When a relatively heavy load is applied to the equipment, the vehicle body is forced downward with respect to the axles supporting the wheels on which the vehicle rides. This results in compression of the suspension which can adversely affect the maneuverability of the vehicle. On the other hand, if the suspension is configured for very heavy loads, the vehicle may have an undesirable ride under light load conditions.
As a result, many vehicles have automatic load leveling systems which employ one or more hydraulic cylinders between the axle and the frame of the vehicle to ensure that the frame is maintained at the proper height above the axle. When a heavy load is applied to the frame, the drop of the frame is sensed and additional hydraulic fluid is applied to the cylinder to raise the frame the desired distance from the axle. Thereafter, when the load is removed from the vehicle the frame will rise significantly above the axle. When this occurs hydraulic fluid is applied to the opposing chamber of the cylinder to lower the frame with respect to the axle. This type of automatic hydraulic load leveling system ensures that the frame and axle will be at the desired separation regardless of the size of the load applied to the vehicle.
One of the drawbacks of this load leveling system is that the opposite chambers of the double acting cylinder have separate pressure control circuits and require high pump pressure to move the cylinder in both directions. Thus the consumption of fluid from the pump for load leveling may adversely affect the availability of fluid pressure for other functions powered by the tractor. In order to compensate for that power consumption, the pump capacity would have to be increased thus raising the cost of the hydraulic system.
Although the piston within the load leveling hydraulic cylinders moves under heavy loads, the piston does not move in response to the relatively small forces due to driving the vehicle over rough terrain. Therefore, the cylinders provide a very stiff the suspension system with negligible shock absorption. This results in a very rough ride, which can be uncomfortably for the operator.
A section of a hydraulic circuit is formed by a relief valve, an orifice and a check valve connected in parallel between two circuit nodes. Fluid flows through the check valve only from one circuit node to the other circuit node. The relief valve opens when the pressure at other circuit node is greater than a predefined level.
The components of this hydraulic circuit section are integrated into an assembly that is adapted to be placed in a bore of a housing that connects the two nodes. That valve assembly includes a body with a first end, a second end, and a intermediate section with a surface for engaging the housing when the body is located in the bore. At least one aperture extends through the intermediate section and a passage extending there through. A check valve member is attached to the body and closes the aperture when pressure in the bore adjacent to the second end is greater than pressure in the bore adjacent the first end.
A relief valve assembly is moveably attached to the body to form an opening at one end of the passage. The opening has a first cross sectional area when the relief valve assembly is in a first position which occurs when pressure in the bore adjacent to the second end is greater than a bias force. Under other pressure conditions, the relief valve assembly assumes a second position at which the opening has a second cross sectional area that is smaller than the first cross sectional area. This second cross sectional area defines the orifice of the hydraulic circuit section. |
Q:
Cloning Record With Visualforce/Apex
I have a VF page that is the 'edit' page for a certain object. I have a button 'Clone'. Upon clicking this button, I wish to be redirected to a new edit page with all the previous objects fields still intact (except for a few that should be cleared and set to default). Note that this new object should not be inserted until I click 'Save'. The Id of the object should be different compared to the previous object, so that on Save, the previous object is not overwritten.
I am thinking I will split this up into two parts, an apex method, and a javascript method for resetting the fields:
<apex:commandButton action="{!saveAsTemplate}" onclick="initTemplate();" value="Clone" />
The javascript portion is easy enough, but I'm having trouble of figuring out what to do on the apex side, besides for setting the id of the record to null.
A:
You could create a record with just the fields set that you want to copy over and then clone that sObject record, similar to this example here.
//copy the purchase order - ONLY INCLUDE THE FIELDS YOU WANT TO CLONE
po = [select Id, Name, Ship_To__c, PO_Number__c, Supplier__c, Supplier_Contact__c, Date_Needed__c, Status__c, Type_of_Purchase__c, Terms__c, Shipping__c, Discount__c from Purchase_Order__c where id = :po.id];
newPO = po.clone(false);
insert newPO;
More about the clone method can be found here:
clone(Boolean, Boolean, Boolean, Boolean)
Creates a copy of the sObject record.
Signature
public sObject clone(Boolean opt_preserve_id, Boolean opt_IsDeepClone, Boolean opt_preserve_readonly_timestamps, Boolean opt_preserve_autonumber)
Parameters
opt_preserve_id
Type: Boolean
(Optional) Determines whether the ID of the original object is preserved or cleared in the duplicate. If set to true, the ID is copied to the duplicate. The default is false, that is, the ID is cleared.
opt_IsDeepClone
Type: Boolean
(Optional) Determines whether the method creates a full copy of the sObject field, or just a reference:
If set to true, the method creates a full copy of the sObject. All fields on the sObject are duplicated in memory, including relationship fields. Consequently, if you make changes to a field on the cloned sObject, the original sObject is not affected.
If set to false, the method performs a shallow copy of the sObject fields. All copied relationship fields reference the original sObjects. Consequently, if you make changes to a relationship field on the cloned sObject, the corresponding field on the original sObject is also affected, and vice-versa. The default is false.
opt_preserve_readonly_timestamps
Type: Boolean
(Optional) Determines whether the read-only timestamp fields are preserved or cleared in the duplicate. If set to true, the read-only fields CreatedById, CreatedDate, LastModifiedById, and LastModifiedDate are copied to the duplicate. The default is false, that is, the values are cleared.
opt_preserve_autonumber
Type: Boolean
(Optional) Determines whether auto number fields of the original object are preserved or cleared in the duplicate. If set to true, auto number fields are copied to the cloned object. The default is false, that is, auto number fields are cleared.
Return Value
Type: sObject (of same type)
|
The Coastal Passage is the FREE sailing
and adventurers publication for anyone who loves or admires the
freedom of the sea. The current edition is available to download
in PDF. No registration, no cookies, no personal information.
These are disturbing and ugly. I'm not
sure myself, if they should be here. It wouldn't take more than
a couple complaints for me to remove this page but in the meantime
I would rather error on the side of exposure.
The above statement in
italics was made three years ago and in that time there was one
complaint out of tens of thousands of viewers. You have spoken.
Since the page was to be edited, I have taken the time to move
the photos to another page and ask that you read these words
before proceeding. This is a sailors website. Most experienced
sailors know enough to have caution regarding sharks but not
all. For you newer sailors or non-sailors about to go on charter,
here is the scoop. Never swim in areas known to have sharks at
night or dusk or early morning. Any time a shark can't be spotted
from the boat and the shark can't really see what you are. Most
shark attacks on humans are mistakes, (or so we are told). I
have shivered in fright watching backpackers on charter boats
in the Whitsundays, splashing and diving from charter boats at
late evening in waters I have spotted Tiger sharks the same day.
And how do you know if
there are sharks in the waters? Stick your finger in the water
and taste it. If it tastes like salt there are sharks in the
waters.
These pics were running around the web
several years ago and I have no knowledge of where or who and
do not represent these as anything but a collection of horror.
No inference should be made of accuracy or even relationship
between the photos. |
[Acute phosphate nephropathy as a complication to bowel cleansing with oral sodium phosphate].
Acute phosphate nephropathy (APhN) has recently been identified as a reason for acute and subsequently chronic renal failure, following exposure to the oral sodium phosphate bowel purgatives. Renal biopsies show acute and chronic tubular injury with calcium phosphate deposits. A case of biopsy-proven APhN is described. The choice of bowel purgatives should be individualised with respect to the risk factors for development of APhN. |
Welcome to Scoil Chríost Rí Cloughleigh!
The boys and girls football teams were both successful in winning their divisions in the Cuman na mBunscol finals earlier this month. Yesterday, we were lucky to have the captain of the Clare football team, Gary Brennan visit Scoil Chríost Rí and present each team with their medals. To win a Cuman na mBunscol medal is a huge achievement and we hope that this talented bunch will continue playing and enjoying football!Visit our Gallery for more pictures of the presentations. |
Alternate-site testing. Consider the analyst.
The ability to perform accurate and precise testing in sites outside the main clinical laboratory is more dependent on the quality of the individual performing the alternate-site testing (AST) than on any other factor. Most of these individuals have little or no laboratory training or experience. The central laboratory must take responsibility for training AST analysts, monitoring their performance (testing, QC, PT, and QA), and certifying their competence. Regular retraining and recertification must be performed. |
Isolated prolongation of activated partial thromboplastin time following wasp sting.
Reactions after bee or wasp sting are similar to anaphylaxis. Symptoms such as weakness, fatigue, vomiting, diarrhea, urticaria, and hypotension may occur. Serious toxic reactions usually occur after numerous stings. Massive bee envenomations can result in immediate onset of shock, hemolysis, rhabdomyolysis, disseminated intravascular coagulation (DIC), coma, and renal failure. In milder cases, patients may only have isolated prolonged activated partial thromboplastin time (aPTT) and normal prothrombin time (PT), clinically without a tendency to bleed. As a rule, they recover spontaneously without any complication. We report three cases of wasp stings; they all manifested prolongation of aPTT and finally recovered completely. Isolated prolongation of aPTT in cases of wasp stings may be related to an extract from the venom inhibiting the coagulation pathway. |
Sahara Sunset Club
Spain
Costa Del Sol
Resort: Sahara Sunset Club
Sahara Sunset Club is styled on traditional Moorish architecture. Surrounding a beautifully landscaped pool and gardens, the resort is just a short distance from the beach. Close by are the Torrequebrada Golf Club, tennis courts, casino, and the Benalmadena yacht marina. On site, there is a restaurant, supermarket, and a clubhouse complete with an indoor pool, gymnasium, sauna, and Jacuzzi. The units also have satellite televisions and are fully air-conditioned.
Please Note: Not all of our vendors choose to advertise on our website. Please contact us either by phone, email or through the enquiry form if you have a specific week in mind. |
Propagation failures, breathing fronts, and nonannihilation collisions in the ferroin-bromate-pyrocatechol system.
The emergence of propagating pulses was investigated with the photosensitive ferroin-bromate-pyrocatechol reaction in capillary tubes, in which various interesting spatiotemporal behaviors such as propagation failure, breathing fronts, and transitions between propagating pulses and fronts have been observed. Rather than a mutual annihilation, the collision of a propagating pulse and a growing front forces the front to recede gradually. A phase diagram in the pyrocatechol-bromate concentration space shows that the pulse instabilities take place throughout the conditions at which the system generates wave activities, suggesting that the presence of coupled autocatalytic feedbacks may facilitate the onset of pulse instabilities. |
I Married A Strange Person!
A newlywed develops a bizarre lump on his neck that gives him the ability to transform people or objects at will. Comedy animation featuring the voices of Charis Michelsen, Tom Larson and Richard Spore |
Correlations and predictions of pKa values of fluorophenols and bromophenols using hydrogen-bonded complexes with ammonia.
Density functional theory calculations have been preformed on a series of the hydrogen-bonded fluorophenol-ammonia and bromophenol-ammonia complexes. Intermolecular and intramolecular properties, particularly those related to hydrogen bonding, have been carefully analyzed. Several properties, such as the bond length and stretching frequency of the hydroxyl group, the hydrogen bond length and binding energy, are shown to be highly correlated with each other and are linearly correlated with known experimental pKa values of the halogenated phenols. The linear correlations have been used to predict the pKa values of all fluorophenols and bromophenols in the series. The predicted pKa values are shown to be consistent from different molecular properties and are in good agreement with available experimental values. This study suggests that calculated molecular properties of hydrogen-bonded complexes allow the effective and systematic prediction of pKa values for a large range of organic acids using the established linear correlations. |
The Broadband Integrated Services Digital Network (BISDN) is serviced by Asynchronous Transfer mode (ATM) switching networks and is used in a variety of applications, which apply to both classified and unclassified ATM networks. Some applications, such as testing of software developments, require the connection of networks having different classification levels. Current requirements for connecting networks having differing classifications, dictated by the National Industrial Security Program Operating Manual (formerly the Department of Defense Industrial Security Manual for Safeguarding Classified Information), include the need to re-certify security on the network for any software changes. However, the extensive testing required for a developmental test would interrupt the network service. Additionally, the testing procedure may compromise the security of a classified network. These are unacceptable consequences of testing software updates for classified networks.
There is a need for a secure method of changing and/or testing software changes on an electronic network, and particularly on a classified network that does not interfere with the operation of the network. |
Cercetae
The Cercetae are an ancient people of Scythia mentioned by Strabo and Pliny the Elder . They are one of many ancient tribes of the Northwestern Caucasus which are the ancestors of modern Circassians. The name "Cercetae" apparently was the basis of the name of the people that arose later - the Circassians. The ethnonym itself of presumably Iranian origin or derived from the , is a kind of "stern oar”, and is the nickname given to them by the Greeks due to their skill in the sea business.
Pliny places them beyond the Amazons and the Hyperboreans, together with the Cimmerii, Cissianti, Achaei, Georgili, Moschi, Phoristae and Rimphaces.
See also
Zygii
Circassians
Maeotians
References
Category:Scythia
Category:Ancient peoples
Category:Ancient peoples of Russia
Category:Circassian tribes
Category:Ancient Circassian tribes |
That is just terrific news for those who enjoyed the show (it was inconsistent in quality, but easily half the episodes were among the best that TV has ever offered), and particularly good news that both Lynch and Frost will be writing the episodes.
In addition, the show might be renewed for more episodes thereafter, according to reports. No announcement was made regarding which past cast members will appear in the upcoming restart, but a Tweet by Kyle McLaughlin, who played Twin Peaks protagonist Agent Cooper, on Monday stated, “Better fire up that percolator and find my black suit 🙂 #Twinpeaks”.
“It’s not a reboot, it’s not a remake; it’s a continuation, and we plan to get to the bottom of almost everything we put on the table,” Frost says.
I consider Frost’s participation as cowriter to be particularly good news. In his film work without Frost, Lynch has ranged from brilliant (Blue Velvet, A Straight Story) to frustratingly incoherent (Mulholland Drive), whereas Frost’s novels (his “Arthur Conan Doyle” occult mysteries and his “Paladin Prophecy” young adult series) have been solid genre work, highly entertaining and well-plotted with good ideas and values behind them. The two men’s talents meshed well in Twin Peaks, and there’s good reason to think that they will make a decent go of it with the new Showtime series. |
Information vs advertising in the market for hospital care.
Recent health care reforms have introduced prospective payments and have allowed patients to choose their preferred providers. The expected outcome is efficiency in production and an increase in the quality level. The former objective should be obtained by the prospective payment scheme; the latter by the demand mechanism, through the competition between providers. Unfortunately, because of asymmetry of information, patients are unable to observe the true quality and the demand for health care services depends on a perceived quality as influenced by the hospital advertising. Inefficiency in the resource allocation and social welfare loss are the two likely effects. In this paper we show how the purchaser can implement effective policies to overcome these undesired effects. |
Mozilla needs a few good beta testers
The company is looking to reach out to the community of users of its software by building a mailing list of those interested in beta testing software.
Mozilla is currently in the midst of testing out its next release of Firefox, however the company is apparently planning ahead for future products. Testers will be responsible with putting release candidate and developer builds through their paces before shipment.
"Our community is a valuable resource, and we hope to build a network of trusted testers who we can count on to help us make the web experience great for all of our users," quality assurance team member Marcia Knous said.
Those with experience in advanced web development are especially welcome to the program. It should be mentioned that these are not betas per se, but rather developer builds, which mean that problems with these applications could be more troublesome than the average beta.
From the beta call, it appears that Mozilla is attempting to keep the program out of the general everyday tester, mentioning that there are other programs for that.
"There are Bug Days and Test Day events that you can participate in if you are interested in becoming a nightly tester or interested in general testing," Mozilla said in an FAQ. |
Cholesterol-lowering drugs known as statins may be linked to an increased risk of diabetes in middle-aged and older women, according to a U.S. study -- but researchers said the benefits of the drugs still make them valuable for people at risk. |
mario the robot
Mario has strapped on his robot thighs with this particular one though’m not really convinced that they really do any such thing more but damn they certainly do look trendy. Use your weapon to take the enemies that you strike and also create your path into the black-flag the ending in order to complete the degree. Explain In the Game |
Travel : Gonarezhou
The lion roars grew steadily louder, echoing off the unseen Chilojo Cliffs. With no moon or stars visible above, the darkness beyond our campfire was absolute. Both Duncan and I pulled our chairs a little closer to the dancing flames, blaming an imaginary chill in the night air rather than the guttural grunts bouncing back off the rock face across the river. Taking a deep swig of Zambezi lager, I fumbled for the powerful torch next to my chair. The hairs on the back of my neck bristled and my heart thumped a little louder as theking of the beasts continued to proclaim his territory loudly.
This was the raw and resurgent Gonarezhou at its very best. I could tell my travel companion felt the same way when, feigning indifference, he casually observed, “Well, it sounds like he’s getting a little closer… So, how far away do you reckon that guy is, anyway?”
Our exploration of the gloriously wild Gonarezhou had begun five days earlier, when we’d exited the rain-soaked Kruger Park at Pafuri, and taken a short detour through Mozambique before entering Zimbabwe: a welcome alternative to tackling Beitbridge! Leaving the paved roads at the South African border, we’d entered a maze of sandy tracks that soon converged on the south bank of the languid Limpopo. It was September, so fording the river involved little more than a short splash for our Hilux. Having negotiated the river, we’d traced theZimbabwean border northeast, with nothing more than a flock of crested guinea fowl and a rundown police checkpoint for company.
Wearing flip-flops, fatigues and a torn T-shirt, an ‘officer’ exited the bulletriddled old police outpost to remove the flimsy wire strung across the road. Utterly absorbed in his cell phone, he’d waved us on without even looking up from it. We’d driven on, thankful to have negotiated a notorious Mozambican police check with such ease. |
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Threaded View
So you literally have no reasoning aside from 'it's not my thing, therefore it's childish'? I spent waaaay more time in highschool getting drunk than I did getting high, but I don't see alcohol as juvenile.
Though, if I were to make a case for one side over the other, I'd argue that alcohol is more dangerous, more destructive, more regularly abused, possibly more addictive, and in my experience alcohol generally results in people acting childish more often than being high.
I agree. There is no age on pot smoking or any other vice. Seriously if you are living your life according to high school, you might want to upgrade. Plus the weed now, is sooooo much better. I will take a bong toke in your honor. |
For the past four seasons, the quarterback has been scrutinized more than any other athlete in Baltimore. His body language has been interpreted and critiqued. His quotes have been dissected and, at times, mocked. And his performance every weekend during the football season has ranged from acceptable to terrible, depending on whom you ask.
Related "Tim Hasselbeck" Articles
The Ravens were ready to break the team huddle to start practice recently when Joe Flacco took off his helmet and his teammates erupted in laughter."The guy was wearing a [skull] cap," wide receiver Torrey Smith said. "You know, the thing...
Ladies and gentlemen, we are a pair of Harbaugh wins away from two weeks of non-stop, around-the-clock Harbaugh family coverage. John Harbaugh’s Ravens and brother Jim’s San Francisco 49ers have advanced to the championships games of their respective...
Last week, I chatted with ESPN analyst and ex-NFL quarterback Tim Hasselbeck about San Diego Chargers quarterback Philip Rivers for an advance of the Ravens-Chargers game. While I had him on the line, I asked him about Ravens quarterback Joe Flacco, who...
In the heat of nearly every moment on a football field, San Diego quarterback Philip Rivers is said to be a man of many words — some more family friendly than others — whether his Chargers are winning big or getting their expletives handed to them.
... |
'Veep' Final Season Trailer Brings Campaign Drama, Laughs And Even More Swearing
The final season of the increasingly realistic political satire premieres in March.
Before real-life candidates make a fool of themselves on the campaign trail, the new season of “Veep” is upon us for one last expletive-filled hurrah.
The first trailer for the final season of HBO’s Emmy-winning political comedy fittingly arrived on Presidents Day with a message from Commander in Chief Selina Meyer (Julia Louis-Dreyfus) to her constituents: “You’re welcome.”
The seventh season, which was delayed for a year following Louis-Dreyfus’ cancer treatment, will follow Meyer’s re-election campaign as she hits the road to understand “real Americans,” which goes about as well as you’d expect.
“This entire country is getting more disgusting by the second,” Meyer says in the trailer, to which her senior strategist adds, “That’s the demo we’re targeting mostly on Facebook.”
Louis-Dreyfus is back for one final round ― and a boatload of awards, if history has taught us anything ― along with cast members Tony Hale, Anna Chlumsky, Sam Richardson, Kevin Dunn, Matt Walsh, Reid Scott, Gary Cole and more.
The actress, who made history for her sixth consecutive Emmy win for best actress in a comedy category, has described the closing of the series as “bittersweet.”
“I adore these people,” she told Jimmy Kimmel in October. “I adore the show and what we’ve been able to achieve with it.” |
Parking brakes in vehicles for continuous immobilization of the vehicle while at a standstill are part of the existing art. Such parking brakes can encompass an electric braking motor that acts, via a gear drive that is embodied, e.g., as a spindle drive, directly on the brake pistons at the hydraulic wheel brakes. The electric braking motor is dimensioned so that a clamping force can be generated which securely immobilizes the vehicle up to a specific gradient. For greater gradients, a hydraulic clamping force can additionally be generated via the hydraulic braking apparatus that encompasses the wheel brakes. |
The mindful nurse leader: Key take-away: Go slow before you go fast.
The first and second articles in this three-part series on mindfulness described the production of the video "In the Moment: Stories of Mindfulness in Nursing" as part of the authors' Robert Wood Johnson Foundation Executive Nurse Fellowship program. In this final installment, we discuss our leadership approaches and lessons learned, both as a team and individuals. |
Startup using RegisterAlarm
I've written an app that uses registerAlarm to restart the app after a certain amount of time. When the app starts via the alarm, is there any way of identifying that it was the alarm that started the app and not the user? |
* Trademarks and registered trademarks of other manufacturers NOT associated in any way with Envirogard Products Limited
Our Mission
To provide effective, reliable, affordable and sustainable water treatment solutions for potable, utility and process water. To improve comfort, safety, and quality of life for people around the world through product engineering, scientific innovation and our expertise in a wide range of water technologies.
Chlorine is the most common chemical used by municipalities around the world to make water safe to drink. Almost all municipal treatment plants in North America use chlorine for primary or secondary disinfection. Chlorine can form cancerous by-products with certain organic compounds present in water. In addition chlorine renders an offensive taste and odour to water and to beverages made from such water. Coffee and tea tastes much better when chlorine is removed from water. Many people have reported to be allergic to chlorine in the water. |
Q:
Fast way of running multiple php commands on one string?
Sorry not too sure on the terminology to ask this questions. But what is the correct quick way of writing this in php? Does the job but seems excessive. Tried looking for this but my terminology returned no results. Thanks for your time.
$matrix_code = $_POST['matrix'];
$matrix_code = strip_tags($matrix_code);
$matrix_code = trim($matrix_code);
$matrix_code = trim($matrix_code, "\"'");
$matrix_code = stripslashes($matrix_code);
$matrix_code = htmlspecialchars($matrix_code);
A:
$matrix_code = htmlspecialchars(stripslashes(trim(trim(strip_tags($_POST['matrix'])), "\"'")));
edit: although this line was the answer to this question, definitely David Rojo 's answer has a better structure for more readability and clean code reasons.
|
BS: The Samoan nickname "uso" has become popular in the locker room because of you. What does it mean, and what bond does it signify?
DP: "It's cool. 'Uso' means 'my brother' in Samoan. It's really cool that you'll walk around the locker room and hear a lot of people saying it. Everyone's like, 'What's up, uso?' It's really cool, man. It's just a family vibe. Just showing others, 'Yeah, you're my brother. You're my friend.' That's what the team's about. It's not about yourself or me; it's about we, it's about us and it's about team. That's what I love about the word uso. It just really brings everyone together."
BS: What are other ways you stay connected to your Samoan roots?
DP: "I love listening to Samoan music and not only that, just the way I was raised, my mom and dad raised me being able to go back home to Samoa. They took me there when I was little and I learned my culture, learned my roots. All those teachings just stuck in my heart, man. I was able to just try to teach those same teachings to my kids, and those teachings are: respect, love, treating others how you want to be treated, respecting your elders and just always trying to compete and be hungry."
BS: I know music holds a lot of meaning in your life. How did that come to be the case in your family?
DP: "I think just being an islander, we're big reggae music guys. We love island music, and we love music, period. It's just being an islander. Music is a big part of our life. When you go to Samoa and you go to the islands, on Sunday … the island just kind of shuts down. Everyone goes to church, everyone's singing, praising God and [doing so] through music and instruments, and stuff like that. Music, God, religion [are] real big in Samoa."
BS: This may be a little philosophical, but how do you describe the connection between music and personal expression and religion? |
Watch the documentary:
The documentary film Feeding Cities takes place in Berlin, Basel, Holland and India, and follows Peter Smeets, an agricultural scientist from Wageningen University. Smeets has a vision: he wants us to move most of our food production, vegetable production and livestock farming to large industrial areas around the city. His catchword is efficiency – whether he is talking about pig farming, slaughterhouses, dairy farms or colossal greenhouses. He has one conviction: “Most people don’t care where their food comes from, as long as it is good and cheap. They only start to get interested in how it is produced when something goes wrong.”
The Urban Gardeners in Berlin take a very different view of this matter. During a discussion that takes place in between the garden boxes and sunflowers on the former airport grounds of Tempelhof, and in the Princesses’ Garden in the trendy district of Kreuzberg, we discover what motivates these small-scale gardeners: contact with nature, social cooperation, and an alternative food supply.
Roman Gaus from Basel goes a step further – he wants to spread “urban farming” across the world, following the IKEA model. The urban farmer has a pilot installation on the roof of a factory building in Basel, where he produces fish and vegetables, and is already supplying five restaurants “with the freshest fish in the city.”
Peter Smeets smiles at these kinds of attempts: “it might work for a niche market, but if we’re talking about feeding the global population, the solution has to come from a global network.” Peter Smeets travels to India, a country where the “agroparks” he has imagined could become a reality. There is the space here to build gigantic industrial food parks, and a big need to further industrialise agriculture.
Smeets’ antagonist in the film is Felix zu Löwenstein. He is the author of the book Food Crash – We will eat organic food or we won’t eat anything at all, in which he argues that we do not have a problem in terms of production, but rather in terms of distribution. Many people living in rural areas do not have access to water, to financing and to education. As an environmental farmer himself, he views the increasing exodus from whole swathes of land in Europe and in developing countries with great concern. What will become of this land that is emptying itself? Without a change of attitude, above all in industrial nations, Löwenstein believes that the world will stumble into a global crisis of unknown proportions.
Is there no other option left to us than to accept people’s consumer behaviour and to try and respond to their ever-increasing needs as efficiently as possible? Or will this route inevitably lead us to a dead end? |
Q:
Difference between two statements that declare an object
What is the difference between this statement
var X = X || {};
And this. They do the same thing? There is a performance difference?
var X = typeof X === "undefined" ? {} : X;
A:
They're not the same.
The || will return the object when X is any possible falsy value.
The typeof check will only return {} if is X is undefined.
According to this test, the undefined check is nearly twice as fast. That's probably because no type casting is required.
|
---
name: Test Component
---
<span id='include-param'>{{ param }}</span>
<main>{{ content }}</main>
|
All Are Welcome
"Can non-Buddhists benefit from your activities?"
Many of the things the Buddha taught can be of benefit to people of all backgrounds. For example, many people find Buddhist meditation helps them to relax and have a more peaceful mind throughout the day. And the basic moral guidelines the Buddha gave are shared, for the most part, with other major religions and modern secular values.
The Buddha shared his teachings with everyone who came to him with a sincere interest to learn. All of our activities are open to anyone interested in learning the teachings of the Buddha.
It isn’t our aim to convert people or get them to join. As Buddhists we try to live without conflict and cultivate a mind of good will towards all living beings.
If you are interested in visiting, come to one of our regular activities, or contact us to arrange a time to stop by. We look forward to meeting you. |
Neuron-glia adhesion is inhibited by antibodies to neural determinants.
Suspensions of embryonic chick neuronal cells adhered to monolayers of glial cells, but few neurons bound to control monolayers of fibroblastic cells from meninges or skin. Neuronal cell-glial cell adhesion was inhibited by prior incubation of the neurons with Fab' fragments of antibodies to neuronal membranes. In contrast, antibodies to the neural cell adhesion molecule (N-CAM) did not inhibit the binding. These results suggest that a specific adhesive mechanism between neurons and glial cells exists and that it is mediated by CAM's that differ from those so far identified. |
The Baroreflex in Hypertension.
Hypertension is a complex syndrome that increases the risk of developing other medical comorbidities and interacts with other medical conditions to increase the risk of target end-organ damage such as cardiovascular disease, stroke, and renal disease. Hypertension remains under-recognized and poorly controlled in the USA and worldwide. In some patients, hypertension is resistant to optimal medical therapy. Over the last few decades, there has been an increasing understanding of the role of the sympathetic nervous system in the development and maintenance of hypertension. This update reviews the physiology and role of the sympathetic nervous system in hypertension and pharmacological and interventional treatments directed at nervous system involvement in secondary hypertension. |
One of the biggest challenges I face in my day-to-day business is trying to help clients evolve their thinking. I say challenges, but I mean frustrating-bang-my-head-against-the-wall-soul-crushing experiences. It’s SO easy to think that a social media strategy is about joining social network sites as a clever way to push your same tired old junk. And you’d be kind of right. That’s exactly what a social media strategy is—because that is EXACTLY what most organizations are doing. But PEOPLE, listen up! It’s not about social media anymore—in fact, it hasn’t been for a couple of years now.
Almost two years ago, Harvard Business Media Labs guru and author, Umair Haque, wrote about this very topic. He said, and I’m paraphrasing here, using social media in business is about developing the capacity to understand your organization’s role in society, and using that role in a more constructive way. It’s about developing a social strategy first—which will then shape your business and marketing strategies. Social Medias are just the tools—the assets. A social strategy is about wielding sociality as a source of advantage. The most basic social strategy is to help you and your brand to STOP being antisocial. Umair is bang on. In today’s social world, this is not radical thinking. Evolve already.
I understand that it’s tough to embrace change. There are no expectations that an organization is going to re-align itself to the 21st century on my command. The reality is that the upper-echelons are in a “wait and see” mode. Folks that have been in the marketing and business world for decades are stuck with traditional blinders on. I have heard these same people exclaim in passionate battle cries that they get it. But they don’t. They don’t believe they are even wearing blinders.
I have also heard every excuse in the book—and more—about their experiences driving them, and how the real world “just doesn’t work like that.” To them I say… pishaw! Take your scared head out of your ego ass and let’s rock and roll this thing. OK, so I don’t really say that—but I’m definitely thinking it while I stomp my foot and ball my fists. How can I help you if you won’t help yourself? It’s not imperative to make the changes at once—what is imperative is that you keep your eye on the ball and your nose in the game. Take your bloody blinders off—it’s not personal. I know you were great in your day, I know you know things, and yes, I know this isn’t your first rodeo. What you won’t hear is that the rodeo is long over my friend. Those horses have been dead for five years—dismount already.
I’m sharing Umair Haque’s article here. He uses real phrases like “soul-deadening” instead of industry buzz jargon that makes you want to dig your eyes out with a spork. You know the stuff—we’ve all sat through too many of those PowerPoint presentations.
“Using the social to “build buzz” and “push product” is about as smart as using a warp drive to visit your local Wal-Mart. Social tools today are used mostly as a new “channel” to push the same old useless stuff of the industrial era at hapless “consumers.” That’s meaninglessness at it’s finest. It’s the least productive — and most soul-deadening — use of a formidably powerful tool.’ – Umair Haque
“Social strategies are about reinventing tomorrow. Their goal is nothing less than changing the DNA of an organization, ecosystem, or industry. Want to get radical? Stop applying 20th century principles (“product,” “buzz,” “loyalty”) to 21st century media. The fundamental change of scale and pace that social tools introduce into human affairs — their great tectonic shift — is the promise of more meaningful work, stuff, and organization. Start with “the meaning is the message” instead.” – Umair Haque |
The increasing use of electronic cards, such as credit or debit cards, to make payments and cash withdrawals brings with it also an increased risk of fraud. For example, where the user's card is stolen, an unauthorised person may be able to make unauthorised electronic payments or cash withdrawals from the user's bank account or credit provider.
The use of chip-and-PIN protection has decreased the risk of this type of fraud through the use of two-factor authentication, i.e. the possession of the physical card as well as the knowledge of the user's PIN. However, this type of authentication can be inconvenient at times. Furthermore, contactless payment technology is becoming increasing prevalent and often does not require entry of a PIN, meaning that an unauthorised user may still be able to make fraudulent transactions using a stolen card via contactless payment.
One solution that has been proposed is the use of a smartcard that includes a biometric sensor, such as a fingerprint sensor, which is embedded into the card. The authorised user initially enrolls their fingerprint onto the actual card, and is then required to place their finger or thumb on the fingerprint sensor in order to authorise any payment or withdrawal. If the fingerprint matching algorithm in the card detects a match then the card allows the smartcard secure element to communicate with the POS or ATM terminal and allow a financial transaction to take place. If there is no match then there is no transaction. |
Bad Luck Brian
parents don't vaccinate him because they think he'll get autism
gets polio and measles |
Adopting White Children as a Person of Color
In a recent article on the Huffington Post, an Indian-American mother shares her story of adopting two white girls. She and her husband decided to adopt the twins after fertility problems, later giving birth to a biological child as well. The author says she loves all her children equally.
Though she tries not to make race and culture an everyday serious discussion, the author says it creeps into life often. From sending lunch boxes full of traditional Indian foods to school with her kids to actively seeking out a diverse group of friends, parts of life that other moms barely think about are always on her mind. Though she admits it would make her and her children’s lives easier to just pack a lunch like all the other kids eat, this mother makes an effort to immerse all of her kids in their culture.
Despite her efforts, the author always experiences racial awareness whenever she takes her children out in public. Whether they mean to be insensitive or not, people ask her questions that make her heart sink. From “What are they?” to “Are you their nanny?” to “Where are their parents?”, questions from strangers make this mom feel awkward and scared for her twins’ future.
Though it comes with daily struggles and hardships, the author says she is happy about her family’s unique traditions. The combination of Indian and American customs are what makes her family one of a kind. She also notes that growing up Indian-American as white girls gives her kids a unique outlook on life. From knowing how to cook traditional dishes and speaking Tamil to forcing people to feel sheepish for making assumptions about them based on their names, these girls have a bright future. |
import ReactInputCalendar = require('react-input-calendar');
import * as React from 'react';
import * as ReactDOM from 'react-dom';
ReactDOM.render(<ReactInputCalendar />, document.body);
|
Weekly Shoot and Quote Challenge: Imagination
Ese, over at her Blog Ese’s Voice, has challenged us to come up with a quote and an image that say ‘Imagination‘:
“The great successful men of the world have used their imagination… they think ahead and create their mental picture in all it’s details, filling in here, adding a little there, altering this a bit and that a bit, but steadily building, steadily building.”
• Robert J. Collier |
{{#if session.isAuthenticated}}
{{#link-to 'slugged-route' comment.user.username}}
{{#if comment.user.isLoaded}}
<img class="icon" src={{comment.user.photoThumbUrl}} />
{{else}}
<div class="icon"></div>
{{/if}}
{{/link-to}}
<div class="comment-content-wrapper">
<div class="comment-content">
<div class="input-group">
{{editor-with-preview
input=markdown
isLoading=isBusy
modifiedSubmit=(action save markdown)}}
{{#each comment.errors.markdown as |error|}}
<p class="error">{{error.message}}</p>
{{/each}}
</div>
<div class="input-group">
<button class="default right {{if isBusy "disabled"}}"
name="save" {{action save markdown}}>Comment</button>
{{yield}}
</div>
</div>
</div>
{{else}}
<div class="comment-content-wrapper">
<div class="comment-content comment-signup">
<p>
{{#link-to "signup" class='button default'}}Sign up for free{{/link-to}} to comment on this conversation, or {{#link-to 'login'}}sign in{{/link-to}}.
</p>
</div>
</div>
{{/if}}
|
The present invention relates to a draft limiting device for a flue gas passage of a fireplace. The device includes a flap arranged to swivel about the axis of a swing shaft, and the device is located in a secondary air inlet of the flue gas passage. In response to a differential pressure which acts on the flap, the flap moves against a restoring moment from a closed position to a fully open position to admit air from a room to the flue gas passage.
Draft limiting devices are known which adjust the draft in the flue gas passage to an optimum value for a combustion process, taking into consideration that too great a draft in the flue gas passage leads to excessive combustion air. Since fresh air enters through a secondary air inlet, the draft in the flue gas passage can be reduced and thus an optimum amount of combustion air can be fed to the combustion process.
Since the draft in the flue gas passage depends on operating variables, e.g., the ambient temperature or the chimney temperature, the fresh air supply through the secondary air inlet cannot be set permanently. Rather, some control is necessary in order to keep the draft nearly constant.
Test devices are known which attempt to keep the draft in the flue gas passage nearly constant, independent of the above-mentioned variables. However, these draft limiting devices were insufficient because the desired value set for the draft, i.e., the reduced pressure which prevails at the fireplace, did not remain substantially constant, especially when the chimney draft was greater.
It was discovered that the unsatisfactory performance of the known draft limiting devices is due to the fact that the restoring moment on the flap becomes increasingly larger as the flap approaches an open position. However, when the flap is in the open position, the force which acts on the flap and which tends to deflect the flap toward the open position is at a minimum. This is true for both of the force components which originate from the static pressure differential conditions, as well as from the flow conditions. Accordingly, the known draft limiting devices open only partially because, as they move from the closed to the open position, the restoring force on the flap becomes greater while the force urging the flap toward the open position becomes increasingly smaller. The draft in the flue gas passage at the fireplace therefore does not remain constant, but increses in an undesirable manner with increasing chimney draft.
An object of the invention is to construct a draft limiting device such that an at least substantially constant draft and, consequently, a reduced pressure in the region of the fireplace can be maintained over a large range of variable operating parameters.
According to the invention, restoring means on the flap of a draft limiting device provides a restoring moment to the flap which either remains substantially constant or becomes smaller over at least a portion of the path of movement of the flap as it moves between a closed and a fully open position.
In one embodiment of a draft limiting device according to the invention, the restoring moment does not increase as the flap moves from the closed toward the open position, but remains constant or becomes smaller, so that the static and dynamic force components acting on the flap serve to move the flap further toward the open position than has been possible up to now.
It has been demonstrated that a constant effective draft at the fireplace can be achieved when the restoring moment is substantially constant for a first part of the path of movement of the flap which first part includes the closed position, and when the restoring moment becomes smaller in a second part of the path of movement which second part includes the open position.
The arrangement of the invention is not only advantageous because of the constant draft at the fireplace, but also because the restoring moment is at its highest value in the closed position of the flap. The high restoring moment permits the flap reliably to remain closed up to a desired value of the effective draft at the fireplace. Therefore, when the draft is low, i.e., below the desired value, the flap does not start to swing as in the known draft limiting devices. While in the known devices, the flap always swings open even when the chimney draft is below the value set for the draft at the fireplace, the device of the present invention is arranged to prevent the flap from swinging open under such conditions. Only when the value of the chimney draft corresponds substantially to the value set at the flap does the flap begin to swing open.
According to a preferred embodiment of the invention, the restoring moment which is effective in the closed position and the restoring moment which is effective in the fully open position can be adjusted to a great extent independently of one another. This feature has the advantage that a pressure threshold at which the flap starts to open can be set when the flap is in the closed position, and that a restoring moment still exists in the open position which, depending on the desired control function, can be set to a value which is as small as possible. This makes it possible to compensate for tolerances such as are required when the restoring moment is produced by gravitational forces and, therefore, depends on the position of the device when installed, as well as dimensional variations from production of the device.
The draft limiting device of the invention can also be constructed with return springs. Return springs with a substantially flat force characteristic are available in the form of, e.g., gas springs. Spring arrangements with a decreasing force characteristic can be realized with gear means, e.g., by the selection of the system points of the spring arrangement.
When arranging the flap as a pendulum which is supported by a horizontal swing shaft for swiveling movement between the closed and the open position, a restoring torque or moment developed by gravitational force can be used. The concept of the invention then can be easily realized by providing that the center of gravity of the flap arrangement which includes all parts fixed to the flap, lies substantially on the same level as the axis of the swing shaft in the closed position. Then, when the flap approaches the open position, the center of gravity follows a circular path, and the horizontal distance or moment arm from the center of gravity to the swing shaft axis decreases in a co-sinusoidal relation. This results in a decreasing value of the restoring moment as the flap moves toward the open position.
In the above embodiment, the value of the restoring moment which is provided in the closed position can be set in a simple manner by making the center of gravity of the flap arrangement adjustable in the horizontal direction. The restoring moment which is provided in the open position can be set by making the center of gravity of the flap arrangement adjustable in the vertical direction when the flap arrangement is viewed in the closed position.
The above two settings for the center of gravity can be implemented in a simple manner by providing an elongated arm extending transversely of and horizontally from the swing shaft (when the flap arrangement is viewed in the closed position), and a weight on the arm which can be set at a desired position along the longitudinal direction of the arm. Further, the arm is secured to the swing shaft so that it can be adjustably rotated about the axis of the swing shaft and remain fixed at a desired position relative to the swing shaft. Although the longitudinal axis of the arm need not intersect the axis of the swing shaft, it is preferable that both axes intersect one another for reasons of structural simplicity. It is also preferable that the arm face toward the room, thereby facilitating its operation and allowing the arm weight to be easily accessible.
The flap preferably is constructed so that during the change from the closed to the open position, a secondary air passage is defined between only one side of the flap and the secondary air inlet. This is contrary to the known draft limiting devices in which a secondary air passage is formed on both sides of the flap when the flap is opened. The disadvantage of the known arrangement is that an airfoil condition results from the flow of the secondary air, which adds to the restoring force as the flap opening increases. This situation does not occur with the present device which acts to maintain a constant draft at the fireplace.
The formation of a single air passage on only one side of the flap is achieved by placing the swing shaft in the region of an inside edge of the secondary air inlet. While such an arrangement might appear to make it difficult to locate the center of gravity of the closed flap arrangement on the same level as the swing shaft axis, a preferred embodiment of the present device overcomes such a problem by providing a raised shield member fixed to the flap. Therefore, when the swing shaft is arranged parallel to an inside edge of the secondary air inlet, the entry of the secondary air inlet located between the swing shaft and the inside edge always remains closed. The shield member may be in the form of, e.g., a semi-cylinder having a center of radius which coincides with the axis of the swing shaft, and having a radius which corresponds to the distance between the swing shaft axis and the adjacent inside edge of the secondary air inlet. The semi-cylinder may be arranged so that its flat outer surface which is parallel to the center of radius abuts the surface of the flap. By suitably locating the semi-cylinder, the center of gravity of the entire flap arrangement can be brought to the desired location. The shield member can be arranged, for example, so that it extends at least partly over the smaller portion of the flap which is bounded by the swing shaft, so that the shield member acts as a counterbalance weight for the remaining larger portion of the flap at the desired setting of the center of gravity.
In order to provide for fine adjustment of the center of gravity, it is preferred that the arm weight be substantially lighter than the counterbalance weight of the shield member. Accordingly, fine adjustment of the center of gravity is achieved easily by moving the arm weight over relatively large distances along the arm.
The various features of novelty which characterize the invention are pointed out with particularity in the claims annexed to and forming a part of this disclosure. For a better understanding of the invention, its operating advantages and specific objects attained by its use, reference should be had to the drawing and descriptive matter in which there are illustrated and described preferred embodiments of the invention. |
Phagotosis by macrophages is an essential component of innate immunity. Although post-phagocytic delivery of microbes into macrophage lysosomes typically leads to their degradation, some pathogenic microorganisms survive phagocytosis and evade macrophage defense mechanisms. Listeria monocytogenes is an intracellular pathogen that survives by passing from phagosomes into cytoplasm. Activation of macrophages with interferon-g plus LPS or TNFa increases resistance to many pathogens, including L. monocytogenes. The long-term objective of these studies is to identify those features of macrophage endocytic compartments that counteract intracellular pathogens. The hypothesis to be investigated in this proposal is that increased resistance to pathogens in activated macrophages results from altered phagosome progression to lysosomes, plus localized delivery of toxic compounds into acidic, late endosome-like phagosomes. To test this, quantitative fluorometric methods will be used to measure endocytic compartment dynamics and physiology in activated and non-activated macrphages. The first specific aim is to measure rates of phagosome maturation, fusion and lysosomes, and fluid-phase solute recycling. In the second aim, biochemical and fluorescence microscopic methods will be used to measure intravacuolar pH and intracellular nitric oxide levels. Sites of peroxynitrite generation will be localized in the cytopolasm and in individual phagosomes. The third specific aim is to identify host and bacterial factors that influence escape of L. monocytogenes from phagosomes. L. monocytogenes secretes a hemolytic protein, listeriolysin O ( LLO ), which mediates bacterial passage from phagosomes to cytoplasm. Fluorescence microscopy will be used to identify the compartment permeabilized by L. monocytogenes , and to determine how this compartment is altered in activated macrophages. Features of LLO that mediate escape from phagosomes will be identified using bacteria expressing mutant and wild-type LLO. For each mutant, the compartment of escape, the efficiency of perforation and escape, and the pH of perforation will be determined. Both listericidal and nonlistericidal macrophages will be compared, as well as macrophages from mice with induced deletions for components of the nitric oxide or superoxide biosynthetic pathways. Because these studies will provide direct measurements of conditions inside the vacuolar compartments of activated macrophages, the results should improve understanding of host defense mechanism related to infecton by L. monocytogenes as well as other intracellular pathogens. |
Q:
Gulp cwd to project root
My current code:
gulp.task('_sass', function() {
var files = [
'./vendor/bower_components/bootstrap-sass/assets/stylesheets/_bootstrap.scss',
'./resources/assets/sass/main.scss',
'./vendor/bower_components/bootstrap-rating/bootstrap-rating.css',
'./vendor/bower_components/select2/select2.css'
];
return gulp.src(files)
//return gulp.src(files)
.pipe(concat('all.css'))
.pipe(sass())
.on('error', notify.onError(function (error) {
return "Error: " + error.message;
}))
.pipe(gulp.dest('./public/css/'))
.pipe(reload({stream: true}));
});
As you can see, I have a files array where I store all the paths to the .scss files I want to concat into all.css. But I get this error:
Error: file to import not found or unreadable: base/normalize
Current dir: /Users/**/Code/Laravel/vendor/bower_components/bootstrap-sass/assets/stylesheets/
which is obvious, because gulp uses the first path of the array as it's base directory. So I tried settings the base or the cwd to './', so I could specify my Laravel root directory. But that doesn't work. How can I solve this problem, so I can use all these .scss files without copying files to other directories?
A:
That's a tricky one, because you wouldn't need the basic working directory relative to your gulpfile, but rather relative to all your Sass components.
Am I right that './resources/assets/sass/main.scss'is your main Sass file which you use by yourself? If so, I'd suggest importing bootstrap there:
@import '../../../vendor/bower_components/bootstrap-sass/assets/stylesheets/_bootstrap';
At let Sass deal with the files, Sass is usually a lot better in handling relative URLs.
Than I'd split up Sass and CSS files, bundling them later using a stream queue:
var queue = require('streamqueue');
gulp.task('_sass', function() {
return queue(
// our CSS files
gulp.src([
'./vendor/bower_components/bootstrap-rating/bootstrap-rating.css',
'./vendor/bower_components/select2/select2.css']
),
// our Sass file, compiled to CSS
gulp.src('./resources/assets/sass/main.scss')
.pipe(sass())
)
// all the rest
.pipe(concat('all.css'))
.on('error', notify.onError(function (error) {
return "Error: " + error.message;
}))
.pipe(gulp.dest('./public/css/'))
.pipe(reload({stream: true}));
});
|
Rep. Debbie Wasserman Schultz, D-Fla., DNC Chair and close friend of former Arizona Rep. Gabby Giffords, said "Gabby is doing so well." Wasserman Schultz joined ABC News in a web exclusive after her appearance on the "This Week" roundtable Sunday, discussing her political career and personal motivations, Chuck Hagel's selection as defense secretary, in addition to sharing news about Giffords.
"Gabby is doing so well. She's made tremendous progress. She continues to make progress," Wasserman Schultz said. "She's given a couple of short speeches. We saw how incredible she was during her testimony in front of the United States Senate. She's started an organization with her husband, Mark Kelly, Americans for Responsible Solutions. And they're advocating all over the country for a responsible approach to dealing with gun violence and gun safety."
Read More Below:
What are your political plans for the future? Would you consider running for president?
"Well, you know, I was just reelected to my fifth term in the House of Representatives and it is such a privilege to represent my community in South Florida in Washington. I'm focused on doing the best job I possibly can for them. At the same time, President Obama asked me to take on another term as chair of the Democratic National Committee, so I'm focused on that for right now and trying to get a handle on this deficit and continue to get the economy turned around. You know… we'll address my future plans down the road."
What motivates you to do the job you do, every day?
"Well that's easy - my three incredible children. I have twin thirteen year-olds and a nine-year-old. And they really are my motivation to make the world a better place, to help make other people's lives better. That's what my public service has been all about and, you know, I look at all the decisions that I make through the lens of being their mom."
How do you feel about President Obama's selection of Chuck Hagel as defense secretary?
"I think President Obama's selection of Secretary Hagel, who was just confirmed by the Senate, was a wise one. Secretary Hagel is going to represent the United States very well across the country. I think the combination of his experience as a United States senator and also, his background as a Vietnam veteran and the first enlisted soldier to rise all the way to the post of Secretary of Defense is going to serve our troops well."
Lightning Round: iPhone or Blackberry?
"Actually, Samsung Galaxy."
Favorite movie this year?
"Lincoln, for sure."
Comfort food?
"Baked potatoes."
Like "This Week" on Facebook here. You can also follow the show on Twitter here. |
Increasing Returns Berlin's Poor Collect Bottles to Make Ends Meet
Many pensioners and unemployed people in Berlin are turning to an unusual means of supplementing their meager incomes: collecting discarded deposit bottles. They can return them to stores or supermarkets for a few cents per bottle. But as the activity becomes more popular, competition among collectors has intensified.
Von Helen Whittle |
The tie that can’t be severed…
Even on my darkest days, when my monster convinces me that nothing I know to be true is real, when it has me believing that she doesn’t care, my heart still manages to persuade me to talk to her. Even when it’s scared that the monster is right.
Yesterday the monster had me completely convinced she didn’t care. A rather large battle with it was pretty much lost… But then there she was. Smiling at me. And suddenly everything was ok.
I just wish I could explain to her how hard I’m fighting against the monster, how I’m training myself not to go for the ways that used to quiet it. How the one thing she said stays in the back of my mind. A constant reminder. It’s what stops me from giving in. Even when all I want is for the monster to stop.
She’s my strength even when the monster has me almost convinced otherwise. I can’t thank her enough for that. She has literally saved me. And yet I still find it hard to open my mouth and tell her what happens when it gets bad and how she really gives me hope. Or to type the words. I’ve tried… |
Q:
macOS, Visual Studio Community: How to change indentation/format settings
How does one change format settings (namely indentation size) in Visual Studio Community on macOS? Answers say to go to Tools > Options but there's no Options option in my Tools menu. If I recall it's somewhere in Preferences > Text Editor but I can't seem to find it.
A:
Found it.
Preferences > Source Code > Code Formatting, choose your language and see Whitespace options in the Text Style tab.
You can use SHIFT + CMD + L to reformat existing files individually.
|
Today, communications devices, such as paging devices undergo testing to determine whether they conform to the particular communication protocol. In the case of paging systems, there are three typically used protocols referred to as FLEX.TM., ReFLEX50.TM. and ReFLEX25.TM. protocols. In the prior art, protocol conformance testing is performed by one-way paging systems, and thus, only one-way devices (i.e., devices only capable of receiving paging messages, not transmitting paging messages) are tested. In the prior art, the testing is performed by a protocol encoder, which acts as a signal generator to simulate a one-way paging protocol by encoding a single outbound channel for the one-way paging device. The paging device is connected to the encoder to undergo testing. During testing, the one-way paging device could be tested for compliance to the protocol through a series of messaging scenarios.
However, newer protocols allow for two-way paging. In two-way paging, the paging network transmits and receives simultaneously, and the paging device must be tested for both receiving and transmitting. Therefore, the encoders used for testing one-way paging devices are not sufficient. Furthermore, the testing of two-way paging devices is more complicated because the protocols typically include acknowledgment or message receipt transmission, as well as message origination from the paging device. Also, the two-way paging protocols often support use of multiple channels. That is, the paging device can be made to switch communication frequencies. Each feature of the protocols for two-way paging is tested, and since paging devices receive on multiple frequencies, the tester must transmit on multiple frequencies. Therefore, a new testing system is needed to handle testing of two-way paging devices. The present invention provides such a testing system. |
//
// firehorse
// by Roee Hay & Noam Hadad, Aleph Research
//
#include "constants.h"
// This label will be used as the exception handler for aarch64 exceptions
// It saves the register state on the stack, and the passes the control to the dbg_entry function
dbg_entry64:
STP X30, X0, [SP,#-0x10]!
STP X28, X29, [SP,#-0x10]!
STP X26, X27, [SP,#-0x10]!
STP X24, X25, [SP,#-0x10]!
STP X22, X23, [SP,#-0x10]!
STP X20, X21, [SP,#-0x10]!
STP X18, X19, [SP,#-0x10]!
STP X16, X17, [SP,#-0x10]!
STP X14, X15, [SP,#-0x10]!
STP X12, X13, [SP,#-0x10]!
STP X10, X11, [SP,#-0x10]!
STP X8, X9, [SP,#-0x10]!
STP X6, X7, [SP,#-0x10]!
STP X4, X5, [SP,#-0x10]!
STP X2, X3, [SP,#-0x10]!
STP X0, X1, [SP,#-0x10]!
LDR X0, =ADDR_DBG_ENTRY;
BR X0
.global dbg_entry64
|
Baker's Drive-in is a great place for a quick bite. You have to place your order and take it since this is strictly a drive up. They have great burgers, fries, onion rings, etc. They also have fresh, fried pies that are delicious but they run out quick! Love to pick up it and take it to the local park for a picnic. Try it!
Baker's Drive-in is a great place for a quick bite. You have to place your order and take it since this is strictly a drive up. They have great burgers, fries, onion rings, etc. They also have fresh, fried pies that are delicious but they run out quick! Love to pick up it and take it to the local park for a picnic. Try it!
Was this review helpful to you?
Wait, you're the expert.
If you've been to or used
Baker's Drive-In, leave a review.
It's easy, only takes a couple of minutes and you'll help thousands make an informed decision. |
Current use and future directions of adenovirus vaccine.
Adenoviruses are a major cause of respiratory illnesses in military recruits and also are common causes of respiratory and gastrointestinal infections during childhood. Forty-one serotypes of human respiratory and enteric adenoviruses have been identified. Live, oral adenovirus vaccines developed for the military and tested in large clinical trials have proved to be safe and highly effective in decreasing hospitalizations related to adenoviral acute respiratory diseases. Studies have demonstrated little horizontal transmission among military personnel but substantial transmission among family members. Use of recombinant techniques have opened new opportunities for the development of recombinant adenovirus vector vaccines against a number of viral pathogens such as hepatitis B, human immunodeficiency, herpes simplex and respiratory syncytial virus. |
Friends Who Are Going
Friends Attending
Friends Attending
Friends Attending
Description
Tech Tech Talk is a monthly event where a particular technology is presented, followed by a Q&A or Workshop.
bitmaker is our guest this December with a theme of “Progressive Web Apps + Rest API in Elixir and Phoenix".
In this session we will talk about two hot topics: Progressive Web Apps and the Phoenix Framework (using the elixir programming language), using a real world project we are developing.
Progressive Web Apps are a new way to deliver amazing user experiences on the web. PWA are reliable, fast and engaging. It is an easy way to create web apps that feel like native apps.
Phoenix is a web framework written in Elixir which implements the server-side MVC pattern. Many of its components and concepts will seem familiar to those with experience in other web frameworks like Ruby on Rails or Python's Django. |
console.log('testing list_tube_used');
var assert = require('assert');
var helper = require('./helper');
helper.bind(function(conn, data) {
if(String(data) == "list-tube-used\r\n") {
var response = 'USING';
response += "\r\n";
response += "tube"
response += "\r\n";
conn.write(response);
}
}, true);
var client = helper.getClient();
var success = false;
var error = false;
client.list_tube_used().onSuccess(function(data) {
console.log(data);
assert.ok(data);
assert.equal(typeof data, 'object');
success = true;
client.disconnect();
});
client.addListener('error', function() {
error = true;
});
process.addListener('exit', function() {
assert.ok(!error);
assert.ok(success);
console.log('test passed');
}); |
The present invention relates to a flange fixture intended to hold a flange to a tube for welding the flange to said tube.
The object of the present invention is to obtain a flange fixture for eliminating assistance of further working power and thereby eliminating the human fault factor, as well as obtaining a simple and rational handling of the fixation of flanges to a tube, independent of any presence of bends on the intended tube or not.
At the welding of flanges onto tubes two men are used today, whereby one holds a flange by means of a gripping tool or by hand to the tube, whereupon the welder applies a number of point welds for fixation of the flange to the tube, whereupon a complete welding takes place along the whole abutment surface. Hereby the problem is to hold the flange in a correct position visavi the tube, on one hand what regards the distance, as distance of one to some millimeters is wanted in connection with the welding, on the other hand what regards the position of pre bored holes of the flange visavi the rotation and future connection of the tube to another flange. Hereby an intended rotation of two tubes in relation to each other be achieved as otherwise a complete mounting of a tube construction can become completely wrong. Further, the joint of the flange perpendicular to the longitudinal axis of the tube difficult to obtain in particular if the tube has not been cut perpendicular to said longitudinal axis, as the eye willingly follows a given line.
Hitherto, there has been no simple and rational construction to solve this problem, a construction which in a simple way can be handled at the individual place of work.
It has now surprisingly been shown possible to be able to solve this problem in a simple and rational way by means of the present invention which is characterized in that it comprises
a) a cylindrical central body comprising at least three evenly distributed expansion holders as well as one cylindrical part provided with threads, whereby the expansion holders are arranged to receive at least each a radially movable expansion means, and whereby the cylindrical part being provided with threads is arranged to receive one controlling device influencing the radially movable expansion means for obtaining a outwardly directed movement,
b) a first cylindrical shaft axially and rotatably mounted arranged in the central body and comprising a second controlling device arranged in the end thereof facing away from the central body,
c) an axially and rotatably arranged shaft in said second shaft, which shaft in its end receives at least three evenly distributed second expansion holders, which are arranged to receive at least each one radially movable second expansion means, whereby said second controlling device is arranged to influence said second expansion means for obtaining an outwardly radially directed movement; and
d) at least one device for checking the influence of the respective controlling device for radially outwardly directed movement of the respective expansion means.
By means of the present invention it is achieved that a flange can be readily fixed to a tube for subsequent welding of the flange onto the tube, whereby the flange will be correctly positioned in relation to the tube both regarding distance, angle as flange hole relationship.
Further characteristics of the present invention will be apparent from the accompanying claims. |
Prescription drug abuse is supposed to be a growing problem or whatever, right? One o’ them hot-button issues poised for the solvin’? Well, stand back, I got this one. The key to solving this issue, like any issue, is following the path of least resistance. So, what we gotta do is, we gotta make it easier for people to acquire other drugs. You know, your heroins ‘n your PCP’s ‘n whatnot. Soon enough, they’ll all be hooked on that stuff instead, ‘n demand for your scriptaroos or whatever the junkies are callin’ ’em will fall faster than some sorta metaphor involving a hooker’s underwear. Problem solved. |
Gallium nitride (GaN) based power devices have been regarded as promising candidates for high-frequency and high-power applications owing to the superior material properties such as high polarization-induced 2DEG density, high electron saturation velocity and high critical breakdown electric field. By using GaN instead of silicon, system efficiency can be boosted and also a smaller system volume can be achieved. Despite these advantages, self-heating has been a major hindrance to the deployment of AlGaN/GaN HEMTs in RF/microwave and power electronics applications. The small area occupied by this class of semiconductor chips results in a need to dissipate the heat uniformly and efficiently.
GaN based high electron mobility transistors (HEMTs) are naturally depletion mode (D-mode) devices, which means that when there is no control signal on the gate terminal, the conducting channel is normally on. The on-state resistance of GaN power devices strongly depends on geometry of the layout design.
To deal with this problem, a low voltage silicon MOSFET is usually series-connected with a D-mode HEMT to create a hybrid E-mode device. A prior approach using multiple dies and devices included a series connection of an E-mode HEMT with a D-mode HEMT and a series connection of a silicon MOSFET with a GaN HEMT. However, in such multiple device or multiple die configurations, heat dissipation efficiency was unfavorable.
In addition, prior layout topologies lacked scalability and uniformity on the bare die level when flip-chip packaged on a PCB with good heat dissipation capability such as metal or ceramic based PCB. |
Q:
How to change the application menu name in PyQt4 on OS X
I'm porting a PyQt4 (PySide) application that I wrote for Linux and Windows to OS X, menus seem to be otherwise OK out of the box (i.e. Help menu that only has About in it is magically moved to the "main menu" and a File menu is created just fine, but the "main" menu is titled Python instead of Application name.
I call self.setWindowTitle("Appname") in MainWindow.__init__() and self.setApplicationName("Appname") in Application.__init__() but the result is this:
How can I fix this? - Preferably in a way that my app still looks the same as it did before on Windows & Linux.
A:
So it looks like Mac does something different than the other OS systems. I don't have a Mac so I can't really test it out but I think on a Mac the QMainWindow.menuBar() function does not return the application wide menu bar. You might try creating menubar like.
menubar = QtGui.MenuBar()
that has no parent.
I'm getting this information from the following links.
From the documents
Deploying an Application on Mac OS X
Also, it looks like the file Info.plist in "The Bundle" section of the second link is where the application name would live.
I'm sorry I can't be of more help but I hope this information will help you. Good luck!
|
Q:
Dry vs. Liquid Extract
Dry and liquid extract each have their advantages and draw-backs.
What are the perceived ups and downs for using one or the other?
A:
Dry Malt Extract
Ups
Stores well
Easy to repackage in a ZiplocTM bag
Gives you more points per pound per gallon than liquid (IE: more gravity per weight)
Because it's easier to repackage it keeps longer
Downs
Makes a dusty mess
Becomes a sticky mess if it gets wet (still usable if you can get it out of the package)
Can cause your beer to be darker than expected (see below)
Liquid Malt Extract
Ups
Often cheaper than DME
Downs
Makes a syrupy mess
Necessary to remove the kettle from heat before adding to avoid scorching
Can be difficult to repackage
Have to rinse the container to get all the extract. May be a pain when it comes in plastic
Can cause your beer to be darker than expected (see below)
Note on Wort Darkening
Because many extract brewers do a partial-wort boil the concentration of sugar increases the caramelization process, darkening wort faster. This applies to both liquid and dry malt extracts.
|
What are the Right Moves for Your Easy Yoga Routine for Your Core?
You have to use core exercises for an easy yoga routine to improve your strength. The moves you use can involve very little effort in some cases.
Your core muscles have to be worked on as well as possible. Your core muscles are related to the direct energy that you have in your chest and back. You can use many core exercises in an easy yoga routine to improve those muscles. The moves you can use here are helpful because they do not require much strength or flexibility.
The Cat pose is the first move to use. You have to get on your hands and knees and then round your back up so the spine can curve up. You must hold the position as well as possible.
The Cow pose is related to this but it is done the other way around. The back must be lowered down to where the spine curves down. It is useful to alternate between the Cat and Cow poses during your workout.
A Boat pose is used by keeping your legs together and your arms out. The legs have to be bent upward with your back slightly reclined. The arms must be parallel to the legs at this point. This is done with the intention of creating a right angle on your body to help you exercise your core muscles.
The Dolphin Plank is a part of an easy yoga routine that involves keeping your body slightly elevated off of the ground. You will place your toes on the floor and your elbows to the ground. The chest must stay up and be balanced properly to where it is in equilibrium.
The Crow pose is a little bit of a challenge but it can be easy to work with if you have enough balance. This exercise for core muscles involves squatting and then lifting your body up with your hands. The knees should be near the shoulders and your core muscles. This can work well if you can hold the position for longer periods of time.
You should be exercising your core muscles when you are working on your easy yoga routine. These muscles are necessary for health because they directly correlate to how strong you are and how well you can support your back and abdomen. The yoga poses you can use here are designed for beginners and should not be too difficult. |
Since ancient times, homes, places of worship and other buildings have been decorated through the use of stained glass windows. These windows generally comprise leaded or stained glass members of different shapes and/or colors which together, when placed in a predetermined mosaic form a desired picture or pattern.
While the term "stained glass" is commonly used, it is generally a misnomer. Many coloring methods are and have been employed and the best medieval glass made little use of actual stained glass. Today, plastics are also used in place of glass.
In accordance with classical techniques, these pieces of glass are held together by lead or brass came. Generally, the came comprises a slender grooved lead rod which is used to hold together the panes of glass by being placed between them and being soldered to form the required support structure.
Such work requires a high degree of skill requiring precise cutting of the came to match the pattern, soldering of the came at the points where the metal came member ends meet other members and precise working of the glass into the came. Nevertheless, even with the highest level of skill, imperfections do occur. These imperfections become evidenced by deterioration of the stained glass window structure as the window ages. Deterioration generally takes the form of the introduction of leaks into the structure causing draftiness and the introduction of soot and other dirt into the room in which the stained glass window is located. More seriously, water also will leak through any deterioration or imperfection in the structure. This causes water to accumulate inside the cames causing serious corrosion and eventual disintegration of the structure.
Even without these imperfections, stained glass windows, due to the force of wind, rain and other environmental factors, tend to belly over time, causing further deterioration and compounding problems caused by drafts and leaks.
Still yet another problem with stained glass structures is the fact that they tend to become quite dirty and, because of the delicate nature of the stained glass window, cleaning is a time consuming, tedious and expensive task. This task is often complicated when the particular stained glass used has deep surface texture patterns which also tend to accumulate dirt. Accumulated dirt and other environmental particles also tend to retain moisture for a somewhat longer period of time than a clean window and, accordingly, any corrosion problems will be compounded by the same. This is particularly serious where a particular soldered joint may already be somewhat defective and deterioration of the good part of the joint may result in failure of the same.
In addition to all of the above, since the onset of the Industrial Revolution, acidity of the rain and the presence of other corrosive materials in the environment has introduced a further degree of seriousness to the deterioration of stained glass windows. This aspect is particularly troublesome because of the natural susceptibility of lead and other cam materials to dissolution in the presence of acid. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.