text stringlengths 39 1.13k |
|---|
User: [SPEC] What is the ie for engine section 35?
Assistant: 3.5 |
User: [SPEC] What is the r reverse gear for engine section 18?
Assistant: 8 Layshaft |
User: [SPEC] What is the of pedal base that there is still for engine section 23?
Assistant: 0.5 Nm |
User: [SPEC] What is the brass synchromesh ring with for engine section 72?
Assistant: 6 balls |
User: [EXPLANATION] Explain grind mating surfaces on new wheel house inside.
Assistant: Grind mating surfaces on new wheel house
inside section. Coat mating surfaces needed for spot welding
with zine dust paint
‘Spot weld wheel house. Inert gas weld those mating surfaces which are
not accessible for spot welding
Spot... |
User: [EXPLANATION] Explain grind mating surfaces on new wheel house inside.
Assistant: Grind mating surfaces on new wheel house
inside section. Coat mating surfaces needed for spot welding
with zine dust paint
‘Spot weld wheel house. Inert gas weld those mating surfaces which are
not accessible for spot welding
Spot... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [PROCEDURE] How do you 2. checking speed signal and idle signal for idle control unit 2) speed signal connect voltmeter (m ?
Assistant: 1. CHECKING SPEED SIGNAL AND IDLE SIGNAL FOR IDLE CONTROL UNIT.
2. Speed Signal Connect voltmeter (M 01) between terminals no —e Connect ohmmeter between terminal 3 and Sand 4, s... |
User: [SPEC] What is the bmw 325 e for engine section 21?
Assistant: 325 |
User: [SPEC] What is the pressure should remain constant during for engine section 34?
Assistant: 5 minute |
User: [SPEC] What is the version with for engine section 00?
Assistant: 4 Speed |
User: [SPEC] What is the r reverse gear for engine section 26?
Assistant: 8 Layshaft |
User: [EXPLANATION] Explain 41-328 mount and clamp side panel, tack welding.
Assistant: 41-328
Mount and clamp side panel, tack welding if Spot weld side panel on trunk floor plate. necessary,
Check door gaps. N04: 397
Check trunk lid gap. Spot weld side panel in wheel opening,
Inert gas plug weld joint on entrance. |
User: [EXPLANATION] Explain 41-328 mount and clamp side panel, tack welding.
Assistant: 41-328
Mount and clamp side panel, tack welding if Spot weld side panel on trunk floor plate. necessary,
Check door gaps. N04: 397
Check trunk lid gap. Spot weld side panel in wheel opening,
Inert gas plug weld joint on entrance. |
User: [SPEC] What is the screw in special tools for engine section 34?
Assistant: 33 1.431 1442 and |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [PROCEDURE] How do you 5131... repairng flying stone damage on laminated safety glass wind-?
Assistant: 1. Only damage on outside surface of windows may be repaired.
2. Repairing should be carried out as soon as possible after occurrence of the damage.
3. Impact spot cavities must not exceed a diameter of 5 mm (0... |
User: [SPEC] What is the bmw 325 e for engine section 35?
Assistant: 325 |
User: [SPEC] What is the approved final drive gear lube for engine section 12?
Assistant: - see |
User: [SPEC] What is the since for engine section 00?
Assistant: 1988 Model |
User: [SPEC] What is the introduction date for engine section 31?
Assistant: 8.85 |
User: [SPEC] What is the pressure should not drop by more than for engine section 34?
Assistant: 50 mbar |
User: [SPEC] What is the lamp on the simulator comes on for engine section 16?
Assistant: ~ the |
User: [SPEC] What is the model m3 for engine section 62?
Assistant: 2 |
User: [EXPLANATION] Explain 41-004 frame alignment control dimensions — bmw ‘3’.
Assistant: 41-004
FRAME ALIGNMENT CONTROL DIMENSIONS — BMW ‘3’ Series / E 30 Note:
— Sedans and Convertibles — Only use the following values for a rough
A. inspection, Repairs can only be carried out
correctly with the approved set of a... |
User: [EXPLANATION] Explain 41-004 frame alignment control dimensions — bmw ‘3’.
Assistant: 41-004
FRAME ALIGNMENT CONTROL DIMENSIONS — BMW ‘3’ Series / E 30 Note:
— Sedans and Convertibles — Only use the following values for a rough
A. inspection, Repairs can only be carried out
correctly with the approved set of a... |
User: [SPEC] What is the ie for engine section 62?
Assistant: 3.5 |
User: [EXPLANATION] Explain 337 oo pert pre prout prawins e pre.
Assistant: 337 Oo
pert pre prout pRawins
e pre. |
User: [EXPLANATION] Explain 337 oo pert pre prout prawins e pre.
Assistant: 337 Oo
pert pre prout pRawins
e pre. |
User: [EXPLANATION] Explain 41-013 aim an ultraviolet lamp on damaged surface,.
Assistant: 41-013
Aim an ultraviolet lamp on damaged surface,
The hardening time will depend on the lamp
version, scope and strength of laminate. Gain experiance by making tests, if necessary. Hardening time for 1 mm (0. Chemical reaction ... |
User: [EXPLANATION] Explain 41-013 aim an ultraviolet lamp on damaged surface,.
Assistant: 41-013
Aim an ultraviolet lamp on damaged surface,
The hardening time will depend on the lamp
version, scope and strength of laminate. Gain experiance by making tests, if necessary. Hardening time for 1 mm (0. Chemical reaction ... |
User: [EXPLANATION] Explain 42 oil filter and pipes 10az _ oil.
Assistant: 42 Oil Filter and Pipes
10AZ _ Oil lines from turbocharger to engine block
Hollow bolt
il supply pipe to turbocharger
Hollow bolt
Coupling nut. |
User: [EXPLANATION] Explain 42 oil filter and pipes 10az _ oil.
Assistant: 42 Oil Filter and Pipes
10AZ _ Oil lines from turbocharger to engine block
Hollow bolt
il supply pipe to turbocharger
Hollow bolt
Coupling nut. |
User: [SPEC] What is the maggiore di for engine section Bosch Motronic ML 3-1?
Assistant: 4,2 V |
User: [SPEC] What is the approved final drive gear lube for engine section 00?
Assistant: - see |
User: [SPEC] What is the power in fourth gear at about for engine section 34?
Assistant: 100 kmih |
User: [EXPLANATION] Explain test 2 — ignition coil check wires for.
Assistant: Test 2 — IGNITION COIL
Check wires for tight fit. Check connection plate and ignition lead contacts for
‘traces of burning, cracks and oxidation. Check code number* of ignition coil — see 12 13 009. Check resistance* (M 06) and inductivity*... |
User: [EXPLANATION] Explain test 2 — ignition coil check wires for.
Assistant: Test 2 — IGNITION COIL
Check wires for tight fit. Check connection plate and ignition lead contacts for
‘traces of burning, cracks and oxidation. Check code number* of ignition coil — see 12 13 009. Check resistance* (M 06) and inductivity*... |
User: [SPEC] What is the pressure should remain constant during for engine section 17?
Assistant: 5 minute |
User: [SPEC] What is the brass synchromesh ring with for engine section 51?
Assistant: 6 balls |
User: [SPEC] What is the if the car has to be towed further than for engine section 00?
Assistant: 50 km |
User: [SPEC] What is the of pedal base that there is still for engine section 00?
Assistant: 0.5 Nm |
User: [EXPLANATION] Explain 41-308 inert gas plug weld front wall on.
Assistant: 41-308
Inert gas plug weld front wall on engine carrier. Inert gas plug weld front wall on engine carrier. Inert gas weld front wall on end plate. Coat all mating surfaces and joints with a body
sealing compound". |
User: [EXPLANATION] Explain 41-308 inert gas plug weld front wall on.
Assistant: 41-308
Inert gas plug weld front wall on engine carrier. Inert gas plug weld front wall on engine carrier. Inert gas weld front wall on end plate. Coat all mating surfaces and joints with a body
sealing compound". |
User: [SPEC] What is the marca della vettura for engine section 25?
Assistant: 1 BMW |
User: [SPEC] What is the disassemble output shaft for engine section 31?
Assistant: ~ see |
User: [SPEC] What is the enough with special tool for engine section 23?
Assistant: 23 2 170 until |
User: [SPEC] What is the since for engine section 36?
Assistant: 1988 Model |
User: [SPEC] What is the r reverse gear for engine section 54?
Assistant: 8 Layshaft |
User: [SPEC] What is the diameter must be at least for engine section 12?
Assistant: 33.5 Nm |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [PROCEDURE] How do you troubleshooting brakes?
Assistant: 1. Parking brake lever not released fully 9 brake and parking brake cables, repairing Braking effect insufficient inspite of great force on pedal Brake pedal travel normal a) Brake pads oil splattered or burnt; wrong type of brake | a) Replace brake pads p... |
User: [SPEC] What is the marca della vettura for engine section 36?
Assistant: 1 BMW |
User: [SPEC] What is the maggiore di for engine section 54?
Assistant: 4,2 V |
User: [SPEC] What is the a slave cylinder with a diameter of for engine section 23?
Assistant: 22.2 Nm |
User: [SPEC] What is the marca della vettura for engine section 33?
Assistant: 1 BMW |
User: [SPEC] What is the charsing pressure must not exceed for engine section 54?
Assistant: 2 bar |
User: [EXPLANATION] Explain ly pats) suneser svser orservice inspection oo @.
Assistant: Ly
pats)
suneser svser
ORSERVICE INSPECTION
Oo @ 0
30 62 040
Green LED (4) indicates the 100 meter
pulse required for the service indicator
(SI) and economy control (EC). ‘The LED must come on and go out in
100 meter intervals... |
User: [EXPLANATION] Explain ly pats) suneser svser orservice inspection oo @.
Assistant: Ly
pats)
suneser svser
ORSERVICE INSPECTION
Oo @ 0
30 62 040
Green LED (4) indicates the 100 meter
pulse required for the service indicator
(SI) and economy control (EC). ‘The LED must come on and go out in
100 meter intervals... |
User: [SPEC] What is the with automatic transmission for engine section 34?
Assistant: - middle |
User: [SPEC] What is the with automatic transmission for engine section 26?
Assistant: - middle |
User: [EXPLANATION] Explain inert gas weld side panel on tail panel..
Assistant: Inert gas weld side panel on tail panel. Plug spot weld joint on B pillar. OFS
\y
f
4 :
/ / Inert gas plug weld cow. a *
Plug spot weld joint on C pillar. |
User: [EXPLANATION] Explain inert gas weld side panel on tail panel..
Assistant: Inert gas weld side panel on tail panel. Plug spot weld joint on B pillar. OFS
\y
f
4 :
/ / Inert gas plug weld cow. a *
Plug spot weld joint on C pillar. |
User: [EXPLANATION] Explain 4135 291 replacing right rear side panel (partial.
Assistant: 4135 291 REPLACING RIGHT REAR SIDE PANEL
(PARTIAL REPLACEMENT UP TO WINDOW LINE)
—Two Door Model —
Refer to information on page 41 - 001
Remove or disconnect following parts. Rear bumper, right tail light assembly, trunk mat, tr... |
User: [EXPLANATION] Explain 4135 291 replacing right rear side panel (partial.
Assistant: 4135 291 REPLACING RIGHT REAR SIDE PANEL
(PARTIAL REPLACEMENT UP TO WINDOW LINE)
—Two Door Model —
Refer to information on page 41 - 001
Remove or disconnect following parts. Rear bumper, right tail light assembly, trunk mat, tr... |
User: [SPEC] What is the since for engine section 33?
Assistant: 1988 Model |
User: [EXPLANATION] Explain 41-005 eve: frame alignment control dimensions — bmw.
Assistant: 41-005
eve: FRAME ALIGNMENT CONTROL DIMENSIONS — BMW ‘3’ Series / E 30
‘Only use the following values for a rough ~All Wheel Drive Cars —
inspection. Repairs can only be carried out A Front axle take-up
correctly with the ap... |
User: [EXPLANATION] Explain 41-005 eve: frame alignment control dimensions — bmw.
Assistant: 41-005
eve: FRAME ALIGNMENT CONTROL DIMENSIONS — BMW ‘3’ Series / E 30
‘Only use the following values for a rough ~All Wheel Drive Cars —
inspection. Repairs can only be carried out A Front axle take-up
correctly with the ap... |
User: [SPEC] What is the a slave cylinder with a diameter of for engine section 26?
Assistant: 22.2 Nm |
User: [EXPLANATION] Explain 41 587% * drill out spot welds. 4114161.
Assistant: 41 587%
* Drill out spot welds. 4114161 REPLACING RIGHT WHEEL
HOUSE OUTER SECTION AND
REAR SIDE PANEL
— Convertible —
Refer to information on page 41 - 001. Remove right rear side panel — see 41 35 110. Remove anti-drumming coat on cuttin... |
User: [EXPLANATION] Explain 41 587% * drill out spot welds. 4114161.
Assistant: 41 587%
* Drill out spot welds. 4114161 REPLACING RIGHT WHEEL
HOUSE OUTER SECTION AND
REAR SIDE PANEL
— Convertible —
Refer to information on page 41 - 001. Remove right rear side panel — see 41 35 110. Remove anti-drumming coat on cuttin... |
User: [SPEC] What is the of pedal base that there is still for engine section 64?
Assistant: 0.5 Nm |
User: [SPEC] What is the maggiore di for engine section 54?
Assistant: 4,5 V |
User: [SPEC] What is the bmw 325 e for engine section 00?
Assistant: 325 |
User: [EXPLANATION] Explain 31-48 3160030 replacing one dust cover of left.
Assistant: 31-48
3160030 REPLACING ONE DUST COVER
OF LEFT OR RIGHT OUTPUT
SHAFT
Procedures are identical with those described
in 31 60 020/021. Clean joint to remove the old grease. Do not disassemble a joint or let it fall apart. |
User: [EXPLANATION] Explain 31-48 3160030 replacing one dust cover of left.
Assistant: 31-48
3160030 REPLACING ONE DUST COVER
OF LEFT OR RIGHT OUTPUT
SHAFT
Procedures are identical with those described
in 31 60 020/021. Clean joint to remove the old grease. Do not disassemble a joint or let it fall apart. |
User: [SPEC] What is the a slave cylinder with a diameter of for engine section 00?
Assistant: 22.2 Nm |
User: [SPEC] What is the diameter must be at least for engine section 12?
Assistant: 33.5 Nm |
User: [SPEC] What is the lamp on the simulator comes on for engine section 18?
Assistant: ~ the |
User: [SPEC] What is the coupling nuts for engine section 41?
Assistant: 35 Nm |
User: [EXPLANATION] Explain remove splash guarg "8in engine oi unscrew oi.
Assistant: Remove
Splash guarg
"8IN engine oi
Unscrew oi pan bolts. Jstallation,
TOU it engine ojy+u
lghtenin
an (24 th. |
User: [EXPLANATION] Explain remove splash guarg "8in engine oi unscrew oi.
Assistant: Remove
Splash guarg
"8IN engine oi
Unscrew oi pan bolts. Jstallation,
TOU it engine ojy+u
lghtenin
an (24 th. |
User: [SPEC] What is the version with for engine section 26?
Assistant: 4 Speed |
User: [SPEC] What is the tool 33 7 260 or 33 7 2 for engine section 16?
Assistant: . |
User: [SPEC] What is the model m3 for engine section 36?
Assistant: 2 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.